preliminary drawing

Back to index
ITEM #
FB111
EQUIPMENT INFORMATION SHEET
QTY
EXT NEW
MODEL # ITEM DESCRIPTION
SC4260-1-6
Stationary compactor
MANUFACTURER
Sebright
Notes and
Abbreviations
Department Name
CONTRACTOR
INFORMATION
I
F
C REMARKS
VND CM VND Refer to Architectural and
Engineering documents. 5'x5'
yellow striping on floor required.
Link to PDF file
UTILITY INFORMATION
ELECTRICAL
See Manuf.
Specifications
MECHANICAL: SUPPLY MECHANICAL: WASTE
EQUIPMENT CELL INFORMATION
Date created:
2/18/2013
Date revised:
7/18/2016
Cell library:
layout_backrooms
Cell name(s):
SAFB111
Special CAD Instructions:
ITEM
NUMBER:
FB111
NOTE:
TRASH SETUP: COMPACTOR MODEL: SC4260-1-6, 22' SKID, STANDARD CABLE
1.
UNDERSTRUCTURE, 3/8" THICK HEAVY DUTY MAIN RAILS, AND SEALED
REAR ACCESS COVER / REINFORCED BREAKER BAR WITH LONG HINGED
RETAINER TEETH
2.
COLOR: DARK BROWN / PLEASE VERIFY
3.
460 VOLT 3 PHASE / PLEASE VERIFY
4.
10 HP MOTOR, 44 GALLON RESERVOIR, ALL WEATHER OIL, 15' POWER CABLE
/ SEALTITE
5.
PRESSURE GAUGE NEAR CONTROLS
6.
#11 GAUGE BREAKAWAY REAR BREAK AWAY CHUTE
7.
CONTAINER GUIDE RAILS: 4" TALL X 10' LONG WITH STOPS
8.
POWER EXHAUST FAN: MODEL 4YC69 INSTALLED BY SEBRIGHT,
ELECTRICAL CONDUIT BY OTHERS / 115 VOLT / SINGLE PHASE/ 1/3 HP FAN
9.
ONE PLUS MONITORING SYSTEM INSTALLED - 120 VOLT SINGLE PHASE,
PHONE LINES AND FINAL HOOK-UP BY OTHERS
10.
SET FULL LIGHT AT 1600 PSI
11.
SEBRIGHT TO ADD INTERLOCK TO EXISTING DOOR ASSEMBLY
12.
ELECTRONIC REGEN TO SPEED UP CYCLE TIME
3/8" THICK STEEL WEAR
PLATES BY OTHERS
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 1 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:44
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
EXHAUST FAN
(WIRED BY OTHERS)
OUTSIDE WALL COLLAR BY SEBRIGHT
CHUTE SUPPORT FRAME
ELECTRICAL
DISCONNECT
BY OTHERS
POWER UNIT
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 2 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:40
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
OUTSIDE WALL COLLAR BY SEBRIGHT
EXHAUST FAN
(WIRED BY OTHERS)
CHUTE SUPPORT FRAME
CONTAINER GUIDE RAILS
WITH STOPS BY SEBRIGHT
ELECTRICAL
DISCONNECT
BY OTHERS
POWER UNIT
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 3 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:32
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
ONE PLUS MONITORING SYSTEM
SEBRIGHT TO
ADD INTERLOCK
TO EXISTING
DOOR ASSEMBLY
CONTROL STATION WITH PRESSURE GAUGE
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 4 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:24
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
23'-10"
286"
42" MINIMUM FALL
AWAY ZONE
24"
42"
46"
48"
61"
48"
96"
24"
76"
CONTAINER GUIDE RAILS WITH STOPS
30'
360"
6"
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 5 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:48
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
23'-10"
286"
EXHAUST FAN
(WIRED BY OTHERS)
CONTROL
STATION
EXPANDED METAL FRAME
#11 GAUGE BREAKAWAY CHUTE
48 1/8"
44"
1" GAP FOR
GASKET
46"
48"
101 13/16"
35°
42"
93 1/4"
96"
12"
22'-10"
274"
DISCONNECT
BY OTHERS
CHUTE SUPPORT FRAME
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 6 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:36
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
42"
UPPER CHUTE SECTION
WITH 4" CHANNEL AND
EXHAUST FAN
44"
46"
CHUTE
SUPPORT
FRAME
DISCONNECT
BY OTHERS
93 1/4"
98"
87 3/16"
CONTAINER GUIDE RAILS
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 7 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
SALES LAYOUT FOR MEIJER
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:32
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC
3/8" THICK STEEL WEAR
PLATES BY OTHERS
30'
360"
6"
42"
24"
48"
21"
24"
8'
96"
24"
21"
30'-6"
366"
TITLE:
PRINTED DATE AND TIME:
7/28/2014 1:27 PM
7/28/2014
DATE:
DRAWING LEGEND - CONFIDENTIAL
REVISION:
DRAWN BY:
PF
SHEET 8 OF 8
TOLERANCE
This drawing is the sole property of Sebright Products Inc., and embodies confidential proprietary information. All rights in this
(UNLESS SPECIFIED)
document and in the information contained herein are reserved by Sebright Products Inc. The document is provided for a specific
1/16"
purpose, and the document and the contents thereof may not be reproduced, used or disclosed to others for any other purpose without the FRACTIONS
.XXXX
.0625"
express written consent of Sebright Products Inc. and the drawing must be returned to Sebright Products Inc. when the specific purpose
ANGLES
0 30'
is completed.
MEIJER SITE LAYOUT
SEBRIGHT PRODUCTS INC.
127 N. WATER ST. HOPKINS, MI 49328
PH 269-793-7183 / www.sebrightproducts.com
CUSTOMER NAME:
WEIGHT (LBS):
MATERIAL:
SCALE:
1:64
SER. NO.:
A
SHEET SIZE:
DWG #:
10622-GENERIC