B TECHNICAL SPECIFICATIONS - BAGGER:

Comments

Transcription

B TECHNICAL SPECIFICATIONS - BAGGER:
27-1/8
[689.9]
TECHNICAL SPECIFICATIONS - BAGGER:
- WEIGHT: 314 lbs [142kg] with AB 180
- ELECTRICAL: 110/230 VAC; 50/60 Hz; 12/6 AMPS
- AIR: 5 CFM @80 PSI [142 litre/min] CLEAN DRY AIR
- BAG SIZES: W 2 to 11 in. L 2.5 to 22 in.
TECHNICAL SPECIFICATION - PRINTER:
- LABEL SIZE: UP TO 4 IN WIDE [10 cm]
UP TO 20 IN LONG [50,8 cm]
-A-
40-1/2
[1028]
-ASCALE
3/16
FINISH
47-3/4 HIGHEST POSITION
[1327]
41 LOWEST POSITION
[1041]
58-1/2
[1486]
44-3/8 WHEN UNWIND
IS IN INNER POSITION
[1127]
Fabricated & Documented
to be RoHS Compliant
NONE
2B MILL
HARD COAT ANODIZE
PS110
#3 BRUSH
NICKEL PLATE
PS113
CS116-W
BLACK OXIDE
PS114
CS116-P
BLACK ANODIZE
CS115-W
CS117-W
CLEAR ANODIZE
CS115-P
CS117-P
OTHERS NOTED
B
RCK
03-24-16
A
JPS
5-19-11
REV
BY
DATE
463
DRAWING FORMAT UPDATE, ADD TECHNICAL
SPECIFICATIONS
NEW DRAWING
ECN
DESCRIPTION
MATERIAL SEE BOM
R
MACHINE SURFACES TO BE 125 [3,2]
UNLESS OTHERWISE NOTED
PART MUST BE FREE OF BURRS AND SHARP EDGES
MINIMUM BEND RADIUS UNLESS OTHERWISE SPECIFIED
TOLERANCE
1 PLACE DIMS
2 PLACE DIMS
3 PLACE DIMS
ANGULAR
FRACTIONAL
INCHES
# .1
# .01
# .005
# 1/2 $
# 1/32
mm
# 2,5
# 0,25
# 0,10
NOTICE: THIS DOCUMENT CONTAINS PROPRIETARY INFORMATION
AND IT SHALL NOT BE USED OR REPRODUCED OR ITS CONTENT
DISCLOSED, IN WHOLE OR PART, WITHOUT THE PRIOR WRITTEN
CONSENT OF AUTOMATED PACKAGING SYSTEMS INC.
INCH [MM]
THIRD ANGLE
PROJECTION
10175 PHILIPP PARKWAY - STREETSBORO, OH 44241
DRAWING SIZE
TITLE
D
SCALE
1/8
DRAWN BY
NAME:
D ROMO
DATE:
3/29/11
ASS'Y AB 180
ONESTEP MODEL F
BOM REFERENCE NUMBER
DRAWING NO.
M-ORDER
SHEET 1 OF 1
FP196
REV
B

Similar documents