Senator™ Electronic Bingo System

Senator™
Electronic Bingo System
Operator’s Manual
Arrow International
Capitol Bingo
Equipment Division
48209
Thank you for choosing to purchase Arrow International’s Capitol
Bingo Equipment. We are confident that you will be completely
satisfied with our high quality, durable bingo equipment. Our Capitol
Bingo Equipment has the most technologically advanced electronics
and is designed for easy and reliable operations and trouble-free
maintenance by the operator.
Arrow manufactures the highest furniture quality, hand crafted
equipment consoles in the industry. Our metal fabricated steel
products are constructed of the finest, heavy duty materials available
and guaranteed to withstand many years of use. The Designer Series
consoles offer durable Formica® top and bottom and interchangeable
front panels.
This bingo equipment manual introduces you to the many features of
the Senator™ not found in competitive bingo systems. It will take you
step by step through unpacking and installing the system. It will show
you how to program and run games easily, and how to operate your new
bingo system. Easy to follow instructions and illustrations also guide
you through routine service and maintenance.
Arrow’s hard work and dedication enable us to offer you a breadth
of product line that continues to grow. We are proud to offer you
the most extensive charitable fundraising product line including
Popp-Opens™ pull tabs, bingo markers and bingo paper. This
dedication to providing an extensive line of high quality products is
accompanied by our commitment to satisfying your product needs with
fast and trouble-free service. Please visit us online at
www.arrowinternational.com for the latest in all of our product lines.
We value you as a customer and always welcome and appreciate your
comments and suggestions to help improve our products. Our best
suggestions always come from our game operators and distributors.
We want you to always be a satisfied customer and we will continue
to design and improve our products through the valuable feedback
received from you and our outstanding network of Arrow distributors.
Once again, thank you for choosing Arrow International/Capitol for
your charitable fundraising needs.
Arrow International
~
,"",..-,
traduction
'.
. ",,'- c.'
Your new CAPITOL SenatorTMBingo System was designed using state-ofthe-art technology. It's modern design, console with real oak veneer and
exceptional quality and easeof use have set it apart from the competition.
The SenatorTMis the economical entry level electronic system offered in a
wood cabinet.
Digital communication from the console to the flashboard elinUnates
bu1kY/complicated cabling between the components. The SenatorTM
Bingo Systemwas specially designed with the operator in mind. For
example, all system.controls are placed on a single control panel. The
SenatorTMwill provide years of trouble~free service. However, if a problem should arise, OUTservice persoI\nel will provide timely responseon
repairs, spare parts and technical support.
This revisedmanualwill guide you throughunpacking,~tion,
programming,running gamesand sessionswith easy-to-followinstruc~
lions and correspondingillustrations.
DamageAction Process
Your Capitol Bingo Equipment
contains
,'
'"
"
,
,
delicateelectronicequip-
ment. It Is Imperatwe that you
thoroughly
Inspect
contents of
thepackage
beforethe
accepting
productdeliveryfromthecarrier.
!
In case of severe damage, refuse
the equipment from the carrier.
Contact your dIstributor or Arrow
InternatIonal for immediate
replacement.
If the product is damaged but.
acceptable, make a note on the bill
of lading before accepting. Take a
photo of the damage before and
after unpacking as a reccrd of the
damage. Keep the packaging to aid
In recovering the amount of claim
against the carrier. Contact the
carriers agent Immediately for
Inspection. Be sure to obtaina copy
of the inspection report for your
All
trade
and
trade
nam
are
the
prop
of
thei
resp
com
I~"m
records.
If these precautions are not taken,
we cannot assist you In recovering
the amount of the claim against the
-,-,-
,m Bingo SystemManual
Senator
,.}~:;U(: .~
3
~
Getting Started
A. Unpacking
.".
.."
B. Warranty Assurance
7
C. ConsoleCompatibility.
oo..oo
ll. Installation
A. Electrical
Installation
...
B.
C.
D.
E.
F.
G.
H.
VIII.
Wiring
5
,
7
8
oo.
FlashboardInstallation ..,
...
:...
8
Video Installation
; ;.
"'00""""'"
9
SuggestedNumber of FlashboardMounting Assemblies...n'9
Wall Mounting Preparationfor Flashboard(s)"""""""""""'"
9
Wall Mounting Instructions .,
Ceiling Mounted Flashboard (8)
Flashboard Stand...
oo
Diagrams
u... no "
10
"..
".. 11
.."..
"
11
30
~
'---" "
Getting Started
A. Unpacking
"
A:rrow International designed your SenatorTMBingo System"tohave a
distinctively attractive appearance,and we used careful manufacturing and assembly techniques to preserve this appearance.Each
Senator1Msystem is inspected for scratches,bumps or abrasions
during packing, and is warranted to be free £rom defects.
Caution: This ffashboard weighs
approximately 106 pounds. Use
care and get assistance before
unpacking and lifting. A minimum of
two individualsIs reQuiredfor
unpacking.
.'
;
1. Aashboard
The flashboardis bandedinto a heavycardboardenclosure.
with foam insertsat eachend and in the middle. Thiscartonis
markedwith variouswarning labelsand stampings.Lay the
cartonflat, observingthat the outsideoverlappingcoverof
theflashboard
is onthetopside.
.
Note: Included with the fIashboard
is a 1DOft. data cab/s, 8-flashboard
mounting brackets and a customer
parts kit consisting of:
4- #1820 Light bulbs
2- 4 AMP Sio BID 250V fuses
Before opening, closely inspect the carton for evidence of
shipping damage such as puncture holes, tears,and crushed
edges or corners. Damage to the carton may alert you to
damage to the flashboard. H damage is detected refer to the
Damage Action Processsection (p. 3) for procedures.
Use scissorsto cut all straps. Carefully lift off the carton top.
Cut the tape on the four corners of the carton bottom and lay
the carton flaps down fIat. Slide both ends and the top center
foam pieces off to allow accessto the flashboard. To prevent
scratches,make sure the flashboard remains on cardboard
prior to actual installation: Obtain assistancein setting the
f1ashboardupright.
100 FT.
DATA CABLE
Do not destroyor discardcartonmaterialsuntil after final
inspectionand testing.
Inspect the flashboard to llsUJ'e that all acrylic panels are in
SenatorTMBingo SystemManual
.
5
placeand free of cracksor heavyscratches.Inspectthe
masonitepant!lsfqr damage.If damageto your equipmentis
evident,or if you haveproblemsin any of the aboveareas,
contactyour areadistributor immediatelyfor adviceand refer
to the DamageAction Processsection(p. 3) for procedures.
Caution: Thisconsole weighs
approximately 160 pounds - get
assistance before lifting. A minimum of two individuals is required
for unpacking.
.2~
Console
...
.
The SenatorTM console is packed with foam protectors in a
cardb°aId carton an~ i~.~kid-mo1Jnted.Once again, check the
carton .for possIble signs.of damage. If da:mageis detected
..
"
..;.
~ .refer
to the DamageAction
Processsection(p.3)for
procedures...
Use scissorsto cut the.
..straps from the skid only,
taking care not to cut the
straps protecting the
console.With the help of at
least one assistant, care.
fully lift the console from
the skid and place it on
solid flooring. Cut the
.
Note: Do not destroy or discard
carton materials until after final
inspection and testing.
25 FT.
DATA CABLE
remallringfour strapsfrom
the console and remove the
cardboard top.
Removethe tWofoam protectorsinside the top and slide the
cardboardtube up and off the console.A minimum of two
peoplearerequired to safelyunpackthe console.With one
personlifting from the top of the ball-blowerend and another
individual graspingthe two handleson the oppositeend,
raisethe consoleup and out from the cartonand foam inserts.
Checkthat all castersarein place.Setunpackedconsoleon
solid flooring. Do not destroyor discardcartonmaterialuntil
after final inspectionand testing.
At this point you should inspect the console for shipping
damage. All acrylic panels should be in place. Metal panels
and their associatedswitches and parts should be operational.
If problems are found in any of these areas,immediately
contact your distributor for advice and refer to the Damage
Action Processsection (p.3) for procedures.
Thefollowing canbe found insidethe left door of the console:
(1) Set of superior quality Double Numbered SamsonTM balls
(1) Standard 25 ft. data cable (other lengths optional)
(1) Customer part kit, which includes:
(4) Low-voltage ball switches
(4) #182028V light bulbs
(2) 0.3 AMP MDL 250V fuses
(2) 6 AMP AGC/3AG 250V fuses
'.
..
"...~,,/
~
Open the box of Doubled Numbered SamsonTMballs,check eachball,
for
damage
each
ballmto
its corresponding
slotwater.'
in the, , "
console
balland
tray.insert
If a ball
has
a flat spot,
immerseit in hot
'
Usually theflat areawill pop out. If it doesnot, contactyour distributor for a replacement.
B.
Warranty Assurance
At this time, please verify the serial numbers located on the output
panel in the left side of the console, on the left side of the flashboard.
Check them against those shown on the enclosedwarranty card,
please fill out all requested information and return the completed.
warranty card to Arrow International within 30 days of purchase
along with proof of purchase date.
A secondwarranty cardappearson the backcoverof this manual We
suggestthat you fill out this card and keep the information on hand
for future reference.
To validate your warranty,
you must complete the
enclosed warranty card and
return it to Arrow International, Inc. within 30 days
of purchase from your
Capitol Bingo Equipment
Distributor.
C. Console Compatibility
The SenatorTMconsole is fully compatible with the following:
.
.
..
Capitol StatesmanTM
Verifiers #462210and #462220
Capitol Aluminum Extruded Flashboard #46826
Capitol SenatorTMand 600 LV -3 flashboards
Inquire regaidmgothermanufacturers
SenatorTMBingo SystemManual
."
7
~
Note: Be sure to allow adequate air
flow fOf the console on carpeted
surfaces. If necessary, elevate the
console on planks Of other rigid
A.
forms.
2. Once the system has been completely setup, turn the "POWER"
switches on. Use the other controls as needed.
8.
Flashboard Installation
1. Data connections for the Bingo flashboards are made with the
console data cable output connectors,located on the SenatorTM
InputlOutput panel, in the left hand compartment of the console.
Permanent installations use the 3" x 1" accesshole under the 1/0
panel to run the cables.Temporary installation utilize the gap
between the bottom of the left-hand console door and the bottom
of the console to run the cables.
FLASHBOARD DATACONNECTIONS
ALUMINUM
EXTRUDED
METAL
2. Install the £lashboard data cable. When possible, we recommend
FLASH BOARD
FABRICATED
using a one-piece cable avoiding splices, adapters and other
UPPER LEFT
FLASHBOARD
mating devices. Wiring to the flashboard may be permanently
SIDE PANEL
LEFT SIDE PANEL
installed using a wire mold. Where a permanent installation is
not possible, install the flashboard data cable through the walls
and/ or ceiling to where the console can be rolled in and easily
connected with all data and power cables.Avoid running the
flashboard cable next to high-current lines such as smoke eaters,
air conditioners, etc.
3. For metal fabricated style £lashboards,plug the 3-pin male data
connector into the lower connector labeled "JNPUT...For alumi-
num extruded-styleflashboards,utilize the telephonestyle data
cableprovided With.the alUmInumextrudedflashboardand plug
the data cableinto the SenatorTM
input/output panel and then the
rear telephonejack on the left side of the £lashboardlabeled
"INPUT."
8
SenatorTMBingo System Manual
4.
c.
You may have an installation that requires hook tIP ()f more than
one £1a.shboard.
In such an instance, the second and subsequent
flashboards may be daisy chained by connecting the data cable to
the "OUTPUT' connection on the first flashboard to the "INPUT"
connection on the second £lashboard,and so on. This allows
virtually an unlimited number of Capitol Bingo £lashboardsto be
added. A 3-pin Jones-styleto a 6-pin telephone-style data cable
adapter is supplied with the aluminum extruded flashboards for
when daisy chaining aluminum extruded flashboards with
metal fabricated flashboards. We recommend utilizing two
console data outputs if using three or more flashboards.
VIdeo Installation (optioned)
1. If utilizing Capitol Bingo Equipment Video components, please
refer at this time to the Capitol Bingo Equipment Video Compo~
nents Manual for further instructions.
Caution: Before attempting any
installation, have 8 qualified,
licensed and bonded rigger and
electrician verify the type of
installation. In many cases, the
local building inspector may
require a permit as well as an
inspectionof the site for structural stability.
D. SuggestedNumberof FlashboardMountingAssemblies
E. wau Mounting Preparation for Flashboard(s)
Beforeattemptingto mount any flashboardto the wall, you must first
determinethe type of wall construction.For hollow walls,we recommendthat the flashboardmountingbracketsbe fasteneddirectly into
wall studs.For concrete,brick and cinder-blockconstruction,the
mounting bracketsshouldbe fastenedusinga 'boltand anchor
method(moly bolt). If other methodsof wall constructionareused,
considerceiling mounting or consultthe CapitolBingoEquipment
Servicedepartmentfor advice.Placeflashboardsto offer maximum
playervisibility with minimal effort.
Caution: Do not suspend the
fIashboards using the handles. The
handles are to be used for handling
purposesonly.
Before drilling any holes, check for possible electrical or
plumbing interference behind the mounting holes and
make sure that the £lashboard is level from side to side.
SenatorTM BIngo System Manual
.:\
9
~
F.
Note: When choosing the location
for mounting your fIashboard(s),
consider not only visibility but
protection against tampering,
vandalism and pedestrian traffic.
We suggest that your fIashboard be
mounted at least 7' above the floor.
Wall Mounting Instructions.
For hollDw~wall CODS.tructionuse S/ a" x 3 1/2" lag bolts. Fasten brackets
directly into wall studs. For masonry. construction, use a 3/8" or larger
lag-screw expansion shield with suitable~length lag screw.
1. Tubular
Bracket(optional)
.
(2" and 4"aluminum extruded and 4" fabricated flashboards)
Choose the proper height for easy viewing and mark the
location on the wall. This mounting bracket supports the
£lashboard from the bottom and may be used to mark the
mounting holes. Locate brackets 9" from each end; make sure
the brackets are level; and check for possible electrical or
plumbing interference behind the mounting holes- Equally
spacethe remaining brackets betWeenthe end brackets
insuring that all supporting surfaces are level. Drillthe proper
clearanceholes for the mounting method appropriate for your
wall.
41/6"
4112"
2.Wall~MountJ 8racket
..
.
(2" &: 4" aluminum extruded £lashboards)
Supplied with the 4" aluminum extruded Numbers Only Style
flashboard are three J..shapedwall brackets (other flashboards
may vary). Each bracket has four mounting holes for 3/ sit
bolts. Choose a height that allows for easy viewing and mark
the locati,onon the wall. Then, measure in 81/2" and 9 'lIs"
from each end of the £lashboard and mark the vertical center
lines. Next, from the top of the flashboard, measure up 2" and
.33/8" from the horizontal center lines.
.
WALL MOUNT
TUBULAR
BRACKET
4112"
.Next,spaceany additionalbracketsequallybetweenthe
previousbracketsand locatethe mounting holes,again
checkingfor level.Drill the proper clearanceholesfor the
methodof mounting appropriatefor your wall as described
above.
WALL MOUNT
J BRACKET
13/8"
,
10
SenatorTM
Bingo SystemManual
~
~.
Caution: Do not suspend the
fla!3hboardsusing the handles. The
handles are to be used for handling
purp'~ses only.
Note: See Capitol Bingo Equipment
.8" &12" Aluminum Extruded
Flashboard Manual for additional
information on these products.
1.
. .
EYEBOLTFOR
CHAINMOUNT
. ;. (ARROWPART#46515)
..~
'".",.,.,'
H. Flashboard Stand (optional)
A £lashboardstand allows for easy mobility and storage
of your flashboard.Capitoloffersa doubleupright
.
Hashboard stand for all4t1 and 2" Numbers o:cly or Number
and Game Pattern Indicator Style flashboards. These stands
may beorderedthrough yoUrdistributor.
Pleaserefer to the Arrow International Inc./Capitol
Bingo Equipment catalog for otheroptionai
equipment and accessories.
DOUBLE UPRIGHT
FLASHBOARD STAND
SenatorTMBingo SystemManual
11
~
III. Cont~Q,Is..
"-'~/
These
console
controlprimary
panel. controls are found on the SenatorTM
.
.
. .1
4
.'
1. Power-Power switch for systemcontrols..
.
2.
Blower
Lamp-On/Off
control
for
the
blower
chamber
lamp.
3. Mixer-OnjOff controlfor theballmbdngarm.
.
4. Blower-On/Off control for the ball blower motor.
B.
c;onsoleDisplayControls
.
1.. .. Ball:fimingIndicator
Display-(A) This LE.D. displaysthe time
interval before the next ball is to be call.edand counts down to
zero fron) tJ;\etime set on the Ball Timer Interval Thumbwheel.
.
(B) Thebeeperwill indicatewhen it is time for thenext call.
2. Ball Tn:nerInterval Thumbwheel~13)This thumbwheelsetsthe
time interval the operatorchoosesbetweenball calls.
3. Ball Timer ResetSwitch-(C) This button restarts the timing
sequenceat the Timer Interval set on the Ball Timer Interval
Thumbwheel. (B)
4. Timer Ball Activate/Constant Switch-CD) In the Ball Activate
mode the timer counts down from its preset value (B) to zero,
signal with a beep to indicate to the operator that it is time to call
the next ball and start its count down again. In the Ball Activated
Timer mode, the timer will also count down from it preset timer
interval to zero and give an audible signal; but, it will not reset
until the next ball is inserted into the ball tray.
12
;
,,/'
~
~v. Operation
"..",..."
",
.,
.
To begin a bingo session,turn on the console power switch, the
blower lamp switch, mixer motor switch, and blower, motor switch
on the SenatorTMconsole.You will notice that the balls immediately
go up the ball tube and held in the ball catcher available for play~
Next, turn on the power switches to any additional flashboards
connected to your console.Start calling balls at a nice steady pa,ceand
placetheminto the correspondingball tray slot.
'
The timer will evenlypaceyour ball calling,adjustthe paceof the
game and build player confidence to play additional bingo faces,thus
increasing revenues. Until you find a time that's most comfortable for
you and your players, a good calling time might be every 14 to 20
seconds.When the beeper sounds, it is time to call the next balL
At this time, verify aU the bingos that have been called. It is usually
best if the floor worker calls out the serial number of the bingo paper
to verify ~
from your hall. Then have the floor worker call out
each number in the bingo pattern from the bingo carowith caller
confumingeachcall.
With a little time and practice, you will be operating your SenatorTM
system with easeand really come to appreciate the outstanding
features, convenience and quality designed into the SenatorTM
Bingo system.
.
.
Note; to clear ball tray, pull handle
towards you, turn the blower motor
switch off, and open ball gate.
SenatorTMBingo System Manual
",.::.:;,.
.: i".'
:'0 ::"/"
. '.
13
~
Caution: Always unplug the
$enatorTMconsole and flashboard before performing any
type of maintenance.
Your SenatorTM Bingo System
Periodic servicing of your SenatorTM Bingo System should include
A. Cleaning
.
.
cl~an1ngtpolishing and light bulb replacement. Recommended
cleaning agents for the console and flashboard are as follows:
Console.WoodSurface
.
Useany high-quality wood and furniture polish. Liberally
apply with a cleansoft cloth.Polishfrequently.
Console. Painted Metal Surface.
Use a mild soap solution or mild cleanser.Harsh cleansersor
solvents may damage the paint or lettering. Follow with an
automotiv~style polish for additional protection.
Caution: The front of the flashboard
acrylic is a painted surface.
,
Console and Flashboard. Acrylic Surfaces
Useonly a mild soapsolution suchasliquid detergentwith a
cleansoft cloth for bestresultsand protectionof the surfaces.
Ammoniabasedcleanersmay dull the acrylic.
Flashboard. Brass Anodized Aluminum Extruded and
PQinted Metal Surfaces
Use a mild soap solution or mild cleanser.Harsh cleansersor
solvents may damage the.paint or lettering. Follow with an
automotive~style polish for additional protection.
~~o~~
.
Clean with a mild soap solution such as a liquid detergent.
Harsh cleansersor solvents may damage finish or lettering.
Dry the balls thoroughly using a towel. Insert towel-dried
balls into a paper bag with a small amount of talcum powder,
agitate the balls and shake off the excesspowder.
StaticTreatment
.
Lightly spray antistati.caerosolcompoundover the blower
basepan foam and inside the blower chamberwindows to
eliminatestatic.(Caution:Be surenot to apply antistatic
compoundto the ball-catcheracrylic tube - this may cause
the ball tube to shatter.)Performthis treatmentevery few
monthsor when you noticeballs stickingtogetheror to the
windows.
Inspectthe antistatictinsel surroundingthe two sidesof the
blower basepan . If torn or worn, replacewith AIrow part
#41208Anti-StaticTinsel.
Usevacuumwith wand attachmentto cleanball chuteand
insideboth cabinetdoors.
14
SenatorTMBingo System Manual
'" .
:.~ .
',".,
.'
",
:
~
8..
."
'.....
Changingthe MixingChamberlight Bulb
1. Unlock and open the right hand side blower co]]l.par~ent door.
2. Remove the acrylic panel covering the lamp by turning the two
plastic retaIDing tabs 1800for clearance.
.
Unscrew the light bulb .counterclockwise to remove
it. .
Caution: Always turn the power
off when changing light bulbs.
3.
.
.. .
.
Caution: Always unplug the
Senator console and f/ashboard
before performing any type of
maintenance.
.
4.
Insert the new 7 1/2 5 clear120volt light bulb and turn it dock~
5.
Replacethe acrylic cover and lock it into position with the two
plastic retaining tabs.
.
.
wiseuntil it is snug.Do not overtightenthe light bulb.
6. Closeand lock the blower compartmentdoor.
7 112S 120 VOLT UGHT BULB
,
ChangingUghtBulbsin the Flashboard
1. Metal FabricatedStyleFlashboard(s)
a. Low Side Light Bulbs(B-7):
Remove six Phillips screws from the front of the power
pack panel. Gently slide the acrylic panel to the left.
(Refer to drawing A) Change the light bulb(s)
as necessary.(Refer to SectionC~3p. 17).
b. High Side Light Bulbs (8~lS):
Remoye the metal trim from the right end of the,
£1ashboard
by removingthe five Phillips screws..
Gently slide the acrylic panel to the.right. (Refer to
drawing A.) Change the light bulb(s) necessary.
(Refer to section C-3 p. 17).
SenatorTM Bingo SystemManual
15
~
2. BrassAnodizedAluminumExtrudedStyleFlashboards
a. 2;;and4t;largenumbered£lashboards:
1. Removethe retainingstrip betweenthe low and high
sidepanels.Thisis accomplishedby gently pushingin
the high sideacrylicpanelwhile graspingthe retaining
strip and gently pulling it out and to the right. (Refer
to drawing B.) Oncethe strip is removed,slide the
acrylicpanelSto gain accessto the light bulbsneeding
replaced.(Referto drawing C).
8
2. Changethe light bulb(s)asnecessary.
(Referto SectionC-3~ChangingFlashboaIdLight
Bulbs,p. 17).
3. Slidethe acrylicpanelsto their homeposition.
4. Reinsertthe retainingstrip.
.
.
8" and i2" large numbered£lashboards:
..'
.
.
c
'.
.
L Open
individual
panels
bytwisting
locatingeach
the two
.
tUrn'fasteners
foracrylic
eachpanel
and
a 1/41/4
.
>turn counterclockwise while gently pushing in. Note:
.
Capitol GameLogo sectionsrequire the useof a
phillips screwdriver. (Refer to drawing D.)
Gently open the acrylic panels allowing the velcro tabs
to release.
3.
Change the light bulb(s) as necessary.
(Refer to section C-3 - Changing FlashboaId Light
Bulbs p. 17)
4. Closethe acrylicpanelsand apply gentlepressureto
28..vOLT
MINIATUR.E'BAYONET
LIGHT BULB
2.
'
lock the velcrotabs.
Lock the acrylicpanelsin placeby gently pushingin
the 1/4turn fastener,compressingthe spring and
twisting 1/4 turnclockw1se.
SenatorTMBingo SystemManual
~
3.
.,.~..-_.
Changing Ftashboard Light Bulbs
1.
Gently push light bi.11bin ~hile tumirig. c~unter'cl~ckwise.
Socketis spring loadedand only requires.a 1/4 turn to
releasethe light bulb from the socket.
Caution: Always turn the power
off when changing light bulbs.
2.
Remove the light bulb from the socket.
3.
Insert the new light bulb by aligning light bUlb pins with
the light socket ~otches and gently pushing in and .
turning clockwise. Twist a 1/4 turn to !!ecurethe light
bulb in place.
.
4.
.
Caution: Always unplug the
SenatorTMconsole and flashboard before performing any
type of maintenance.
.
Additionallight
bulbs may be purchased from yo~r
Arrow distributor or a local electrical or electronics
supply house. We recommend using only high quality
replacement light bulbs for extended life and to miriimize
the chance of printed circuit board failures.
..
".
. .
.
When ordering replacement light bulbs for 2" high
number-style flashboards, ask for #182928-volt
miniature bayonet light bulbs. Arrow part #41305.
.
When ordering replacement light bulbs for all other
electronic flashboards, ask for #182028-volt nUniature
bayonet light bulbs. Axrow part #41303
4. Changing Fuses. .
.
When changing fuses in a.fuseblock the folloWing steps
should be followed:
1. Determine which fuse is defective by referring to the fuse
block diagram (pp.4041) or with the use of a voltmeter.
.28 VOLT
MINIATURE BAYONET
LIGHT BULB
2. Unplug the unit from the wall outlet.
3.
Gain accessto the fuse block by removing the six
Phillips
screws
the front of the power
pack panel
and remove
thefrom
panel..
.
. .
4.
Remove the fuse with a fuse puller or with a small flat
blade.screwdriver by carefully prying one end of the fuse
up, grasping the end and removing the fuse.
5.
Replace the bad fuse with a properly rated fuse. Refer to
the fuse illustration (pp.40-41).
6.
Reassemblethe uIrlt.
7.
Plug the unit into a 120 volt grounded wall outlet.
.
.
.
SenatorTM Bjn~oSystemManual
17
~
D. Servicingthe Blower and Mixer Base FaanAssembly
The blower motor .aI\d :o:rixermotor should be serviced every four
months or every 200 operanng hours.
Caution:
Always
unplug
the .
SenatorTM
console
and flash~
board before performing any.
type of maintenance.
.
NEW STYLE (UL
GD)
L
Unplug the console power cord from the wall outlet.
2.
Unlock and open the right-hand-side blower compartment door.
Remove any balls that may be on the blower base pan assembly.
3.
Disconnect the power plug located below the blower base
pan and pull the assembly out of the console.
4.
Lay the removed blower base pan assembly upside down
on a flat surface, remove the four Phillips screws (two
from
each side)
protective . guard,
and lay the
protective
guardfrom
on itsthe
side.
.
5.
Put a few drops of 20W oil into the two oiling ports
located
the top side at each end
of the. blower motor.
(Refertoonillustration.)
..
BLOWER ASSEMBLY
.
SQUIRREL
CAGEBLADES
6. Oil the mixer motor by removing the two 1/4" bolts from the rear
plate of the mixer motor. Oil the felt pad with 20W oil, replace
plate and reinsert the boi~s,being careful not to overtighten them.
the blower motor squiITel cageblades for debris. If
7. Check
dirty, loosenthe cagefrom the shaftwith an t / s"Allen
wrench and remove from the shaft. Qean the blades with a small
stiff brosh, using soap and water, towel diy. Reinstall the
squirrel cage and check that the blades are free wheeling
and not binding.
.
Reassembleand carefully slide the base pan back into
the console with the mixer arm pointing towards the
front of the console.
10. Inspect the air filter and replace if necessary.
.
OLD STYLE BLOWER ASSEMBLY
11.
..
...
...
.
Reinsertbingo balls ontoblower basepan assembly,closeand
lock blower
SQUIRREL
CAGE BLADES
.
Makesureto reconnect
thefour-pinpowerplug.
.
compartment
.'
door.
4-PIN POWER pLUG ASSEMBLY
(MALE RECEPTACI..E)
PIN 2 (WHITE) MIXER MOTOR
PIN 4 (BLACK) NEUTRAL
.
~
This troubleshooting section will help you, your distributor or a local
electricianlocateelectricalproblemsthat may arisewith the
.
SenatorTMBingo System. Several diagrams and schematicshave been
included to help you trace any problems that may occur. Problems
that are not covered in this .sectionshould be directed to your local
distributor or directly to Anow lntemao,onal as listed on p. 42. Please
have the unit's serial number and distributor name readily available
when calling for assistance.
Before referring to the troubleshooting table, please check to seethat
the following conditions are met:
1. Check that all power and data connections to the system
are properly installed. Look for loose COnnectorsor
broken wires. Do not attempt to service.the control panel
in the SenatorTMconsole.Only trained sel-vicepersonnel
are qualified to work in this area.
2. If flashboard difficulties arise, check the power and data
cable connections to the ~hboard If the power is being
supplied to the fJashboards,the vertical BINGO lamps
should be on. If these lamps are not on, check the primary
power to the flashboards.
3. COI\Sultthe Troubleshooting Table(pp. 20-27)
.
,
.
.
4. If furtherdifficultiesarise,consultthefactoryservice
centeror an authorizeddistributor aslisted on p. 42.
TheTroubleshootingTablebegmson the next page.
This tToubleshooting
tableassumesthe following conditions:
1. Thesystemis pluggedinto a 110/120VAC60Hz
groundedpower outlet.
2. Thepower swi~ches
areturned on.
.
3. All ballsarein theballtray.
Troubleshootingtablebeginson the next page.
Thismanualwas accurateat the time of printing. Arrow
Internationalreservesthe right tQlI\~e changesdue to
changingtechnologyand regulations.Pleaseconsultyour
distributor or Arrow InternationalInc.
.
SenatorTMBingo SystemManual
19
~
,
~
.
!
-
SenatorTM
BingoSystemManual 21
,:' :..:.(..:::>~':'..;"~<:::' f,~,:!:'..~.~::,;;,:::';:.;>
:i'"
~
SenatorTM
Bingo System Manual
.:, .
~
1
SenatorTM
Bingo SystemManual 23
;-
~
,
-._..-
..
.
.
.
.
.'
~
.'..,..-/
26
.
SenatorTMBingo System Manual
"',
;
"
~
TroubleshootingTable
- Senator FlashboardContinued
Bridge Rectifier
TOPOWER .TRANSFORMER
TOPRINTED
CIRCUITBOARD
~TO
-.
FUSEBLOCK
TOPOWER
TRANSFORMER
SenlfJtorTM
Bingo System Manual
27
~
NOTES
""--/
28
SenatorTMBingo System Manual
:\"
,:,', ,"
,
~
Caution: For continued fJrotection 8.oainstrlsk of fire, r9f)/ace only with
same type of fuse having the 5alT76electrical ratings.
2" and 4" numbers only fJashboard: 120VAC at 60Hz, 3.0Amps
Primary: 4 Amp 510Bl0 250V
Secondary: 3.2 Amp 510Blo 250V
Logic: 1 Amp 510Blo 25OV
#46050 Weight 106/00.
29" x 91" x 6"
#46025 Weight 206 /bs.
37" x51"x 24"
Senator Ftashboards:120VAC 3AMP MAX
Primary Fuse: 4 Amp 3AG 510bio
Secondary fuse: 3.2 Amp JAG S10bio
Senator Console: 120VAC 60 Hz
12 Amps with service outlet
Blower Fuse: 6 Amp AGC-3AG 250V
Logic Fuse: .3 Amp MOL 250V
'.
SenatorTMBingo SystemManual 29
'.
:",?:..::;:::\,~"
,"'«:,:'
:,::"..""
~
31
.,:
. ,.
~
.",
;,-
'.
,'
~
,:"::' ;,,::,,: '..:,:: \'~::,:?~::~
;~::';"~:~',::>~':>.
><?,:~
:~;:~.':::::~"..:'::'.""':~: :~.: .
~
H.
Darlington Map Detail
ACRD
...
LAMP
LAMP
LAMP
REV
NUMBERS
DRIVER
NUMBERS
DRIVER
X76-78
U77
NUMBERS
DRIVER
.. U3B
U37
85-6
U38
X8o
B8
89-10
U38
..
U40
X84
X85
811-12
813
814
U39
040
U39
B15
U4D
87
X79
X81.83
..
X86-87
X88-89
X90
GP2-4
GP5-6
GP7
GP8
7
08
U7
U8
10'8 LASTA
10'8 LASTB-C
10'8 LASTD-E
10'8 LASTF-G
U21
U22
U21
U22
SW4
XX SEE
.
CONFIGURATION
TABLE
OP9-10
GP11-12
GP13'
GP14
GPt5
010
U9
U10
09
010
GP17
N35-36
N37
U50
049
GP21-22
GP23
N38
U50
N39.40
U52
N41-42
U51
=:=
N45
un .8
U52
.
TT
SW3
SW5
XX SEE
CONFIGURATION
TABLE
81M6
ON TIMEOUT.
DOLLARH
10K'SDVA
10K'SPV B-C
tOKeSDVD-EU25
'1OK'SDV F-G
U25
U26
.U26
OFF
09
02
U1
.
GP18-20
.
GP24
GP25
.
1000'S DV A-t
U23
1000:SDVD-F
10aDSDVG
U24
U23
U2
U1
DOLLARL
100'SD'ilA'
U29
02
'04
100'SDVB-t
100'SDVD-E
100'SDV F.G
U3o
U29
10'8.0VA-C
1°:8 DVD.f
108 DVG
U27
U28
U27
AUX
LMP .
I LMP
N LMP
U67
067
U68
G LMP
0 LMP
U67
U68
..'..
U30
.
AUX
"8 BVA.D
1'S DVE-G
U7D
U69
,..
CONFIGURATION
TABLEWITHOUTLOGICTRANSFORMER
8W 1 all PCBillustration0, p. 391.
.
SW3 SW4 SW5 SW6
SPARES
077, U78
. U3,
.
OUTPUT. 083
061
.
SENATOR-lvs WiTlMEOUT
SENATOR-LV3
WID TIMEOUT
..
XX
ON
OFF
ON
XX
. ON
OFF
..OFF
PRES-20D1
W/TIMEOUT
PRES-ZOD1
WIDTIMEOUT
ON
ON
OFF.
OFF
ON
ON
ON
OFF
STATESMAN
(01)WIDTIMEOUT
STATESMAN
(Gt)W/TIMEOUT
OFF
.OFF
OFF
ON
DN
OFF
OFF
OFF
DFF
OFF
DFFOFF
OFF
OFF
062'
STATESMAN
(DV)WIDTIMEOUT
STATESMAN
(DY)W/TIMEOUT
068
062
.
..
.
(XX = DOESNOT MATTER)
069-70
071-72
073
U64
U63
U64.
075
U64'
074
061
U63
DISABLED
S1M7 NOTUSED
065-66
067
TIMEOUT
(SEETABLEFOR OPTIONS)
U56
055
U56
U55
U56(Labeted
.
U62
OFF STANDARD
OPERATION
DN SMALL SYNC PACKET
OFF LARGESYNCPACKET
. GP16
062-64
SW2
.
ON LAMPSAVERDISABLED
U8
U50
049
061
SW1
ON CONTINUOUS
TEST
OFF
STANDARD
OPERATION
GP1
N31
U57
U58
U13
U15
U16
U15
U16
U14
U2D
U19
U46
G59
G60
~rs~I~~ CONfiGURATION
U19
130
U58
U57
U58
DIP
U13
"S LAST D.F
"8 LAST G
046
045
046
U45
G54-55
G56-57
G58
3.4
1'S LASTA-C
126-27
128
129
G50-51
G52
G53
FOR ACR
VERSION
U74
078
124-25
G47.49
LAST"
.
U44
U43
044
043
U44
G46
U78
.. U76
116
I17M19
120-21
122
123
N32-34
U78
U74
1'S NO.BALLSD-F
1'8 NO.BAllS G
1D'SMD.BALLSA
10'SNO.BALLSB-C
10'8 NO.BALLSD-E
'0'8 ND.BALLSF-G
. U76
U77
-
U37
,'S NO.BALLS
A-C
D WITH
FIRMWARE
GAME#
81
82-4
...
. CONF1GURATION
..
If DarlIngton IS cracked
or burnt checkassociated
lampsockets
before channin g the
:$.
darlington.
ON
NOTE
1 : IFUSING
FLASHBDARDASTEAROPEN,SETSW6 TD
OFF.
THISWILLDISABLE
THETIMEOUT.
NOTE2: IF USINGREVD INOLDERPRESIDENTIAL
5-PINPOWER
CONFIGURATION.SETSW3 TOOFFANDSETSW2 TOON.THIS
WILL DISABLE
THELAMPSAVER
OPTION.FORALLOTHER
APPLICATIONS
SETSW2 TOOFF.
I
",~.../
SenatorTM Bingo System Manual
'.,.
ON
::'
'"
,
",',
,:0,.. ';
"
,/,'
~
ACRe Darlington Map
FRONTVIEW SEGMENTS
0
0
G
P
2
oBEJ"
FlnFl
G
p
1
FRONTVIEW
G
A
M
E
#
,
!
L
A
S
T
#
J14
lj LJ Lj
D
V
I0
14VAC
GND
0
0
0
GND
14VAC
GND
I
\
I
I
,
I
J
I
n1
I
j
0
H
.
EJEJEJ
I
j
LT~EJno
D
V
(
,
L
0
x
ffi[j
J ~
C21
POWEROFFWHENRESETTING
ANYSW1TCHON SW1
,
!
r\
0
SenatorTM Bingo System Manual
35
;
,
~
J.
f!!
;:1:
ell
::i
1:1
=
c;
Q
lID
:c
II)
S
...
~
w
:IE
Q~
CD&!
°Uo)
...Iz
C
lie
I-
,
36
SenatorTMBingo System Manual
.
.
..
.'-
"
.'
I
'.
,..;
.
-,_../
~
K. RibbonCable ElectricalSchematic-Flashboard
.,
tA
~
CD
:I
1:1
ic
=
=
CD
C
....
II.
II:
III
==
ua:
-1;1
~...
9.
c
II:
--.-
.~;>
.0.
C'I
-
'--./
38
SenatorTM Bingo System Manual
~
SenatorTM Bingo SystemManual
. ..;::.
r
:.;..
~
12" FBPrimary Wiring SChematic - Numbers Only
.'-,...,/ .
. .. '..'..: . .,'.
.1
!
. .' ': .
~".
~
41
~
Capitol Bingo Equipment Limited Warranty
Setout beloWarethe 1armS
of the l.ITIiteCI Waranty maae
Dy
Arrow International, Inc. rArrow1ln connection wiltllhe sale of
o.
I ranlll8f OJ
6.Transfer
of umlT8Q
Umlted "anomy
Wcmonfy
...
the CapitolBingoEquipment(the'~Equipment'),
1. Umlted
Warranty
.
.
.PI,IfChasermaytn:ansfeTfisrightaU1dcrthislknltedWarranty,
Pufc;ha5Eirmaytransferrtsright8undcrthisUmit9dWarranty,
subject
subject to
to the
the terms
terms and
and conditions
conditions hereof,
hereof, to
to a
a buyer
buyer
(OOBuyer")
("Buyer") from
from Purchaser
Purchaser ofof the
the Equipment.
Equipment. Thereafter,
Thereafter, the
the
lights
lights under
under this
this LImited
Umlted Warranty
Warranty are
are not
not transferable.
tr8nsferabIe. For
For
the
the transfer
transfer by
by P\.I'chasei'
P\.I"cha.ser of
of the
1he United
Linited Warranty
Warranty to
to be
be
e!Iective,
must
effective, the
It1e foIloWng
folloWIng condttions
conditions
must haw
have 0CClI'I'ed
0CClITed no
no
..
Mr:NIwcrrMt8totheorigiMpurChaS8r("Pu'chaser"}thatthe
Eq\ipment
original
wi.
for
purchase
authorized
in material
a period
of any
.
of ON E YEAR
equiprner'1t
Arrow
dealer,
be
and wotkmanshlp.
in the
from
product
the
data
Of
fme from
free from
manufacturing
Purchaser
representS
an
.
defects.
to Arrow
laterthan
than the
the 30th
30thday
dayfollowing
fonowingthe
the date
dateofof resale
resaletoto Buyer:
Buyer;
. later
.
!hat no employee,agent.or representative
of ArraN(orofm
.A.
A. Purchaser
Pu'chaser
. mat<e the
...
Alrr:NI dealer) has made 8nI represerrtatlOnor warranty re~
the Eq~ent
ex.c:eptas set out herein. Does not
Include consuri18b/eitems such as fitters or bulbs.
~
RETURNED TO ARROW WITHIN 30 DA YB OF PURCHASE FROM AN AUTl-fORIZED CAPITOL BINGO
EQUIPMENT DISTRIBUTOR FOR THIS UMITED WARRANTY TO BE EFFECTIVE. A purchase receipt or other
of date
of origin?!
purchase
must
be submitted
with
Upon
this LImited
Upon an
an effective
effective transfer
transfer of
of1his
Umlted Warranty.
Werramy. Buyer
Buyer will
wi!
be
be considered
considered to
to be
be "Purchaser"
"Pl..II'Chaser"for
for paragraphs
paragraphs 11 and
and 44
hereof.
.
hereof.
7.
7. Inspection
Inspection
With
respectto
any
claimtf1at
the Equipmentis
defective,
With respect
any claim
tI1e.tthe Equipment
Is defective,
Arrow
wiNbetoaIowed
a reasonable
time to inspect
the
Arrow will be allowed a reasonable time to inspect the
. Equipment, in place. If the Equipment is altersd or removed
the
WarrantyCardandwillbe required before warrantyserviceIs
rendered.
.
Ttis LinitedW""",ro+... .-.11.." to normalc:cmnerclaluseand
-
""""'7
Equipment,in place.If the ~
..
are
which
result
from
misapplicaticn,
dling,
caused
by
products
not
befQreArrow hasmade such 1nspecIionOf'waived its right to
do
00so,
so,the
theobftgations
obligationsof
ofIvrow
Arrowwill
willbe
bedeemed
deemedto
tohave
havebeen
been
satisfied.
satisfied.
supplied
by Arrow.
accident,
misuse,
abuse.
neglect,
alteration.
set-t4)
acptment$
fanures
mishan-
. 8. limitation
or mod-
fIcations.This LkT11ted
WarrMty does not cover any d!rnageto
the Equipment resulti1g from feba to install in strX:toonformlty
with
both
local
fire
and
building
codes
isalteredorremoved
beforeArrr:Nlhasmadasuch1nspeclionorwalvaditsoghtto
does not CCNerdamage which 00ClJ'SIn shipment;faIures
which
toto
. B,
B.The
The Equipment
Equipment(as
(asa'1
an entire
entireriunit and
and as
as purchased
purchased by
by
Purchaser)
Purchaser)must
mustbe
betransferred
transferredto
to Buyer;
Buyer;and
and
C,
C.Buyer
Buyer must
musthave
havesubmitted
submittedaanew
newwarmnty
warrantycard
cad together
together
with
by
withproof
proofofatpurchase
byBuyer
Buyerfrom
fromPurchaser.
Purchaser.
.
THEWARRANTYCARD MUSTBECOMPLETED
AND
proof
must
must have
have complied
complied with
with allall requirements
~
makethe limited
umlted Warranty
Warrantoj effective
effective as
as to
to Purchaser;
Purchaser;
and
regulations,
of Actions
Any legal action aga!nstArrowfor a defaUt eXIts obligations
underthisUmitedWEmII11yrOOStbecomrnencedwitJiintwo
or
yeaTS
IfInstallation
doesnot complywiththe installation
instructions
from
the
date
the
Equipment
was
sold
by an authorized
dealerof the Equipment.
9. How to Obtain Service
provided by krow.
9. How to Obtoln s.Mce
If aa problem
the
.If
problemwith
with this
this EQLipment
Equipmentdevelops
developsdI.mg
duringoror after
aftsrthe
ArrCNimakes no warranties, express
or Impfied ~ncluding,
warranty
warranty period,
period, proceed
proceed as
asfollows:
follows:
2. Disclaimer
of
Warranties
without
limitation,.
m~rchantabi1lty.
pressty
provided
herein.
fitness
for
particular
pur-
A. Refer
The
express
warranties
provided
3. Umlatlon
of
or implied,
whether
OOsing
replace
sat
the
out
Remedies.
above,
Equipment,
Arrow
by
M
M
..
or part
will,
at
thereof.
its optiOn,
(8) repair
or
.
refund so muchof the purchasepriceas PurchasE!r
haspaid
plrChase
from
an
authOrized Am:NJ dealer and the date of the discoIIery Of 1M
defect,proyidedthatWiit1ennOtlceofthedefedandiisnattJre
Is given
to
ArrCNi
as
soon
as
praCtical
after
dscovery
and
follCNi
.
the
Trouble-
. I
of the
defect,but in no eventlaterthan90 daysfromthedateof the
discoveryar the defect.
(
~321~757
11
321-0757 ~
outside Ohio,
Ohio, but
but ~in
within the
the V.SA
U.S.A.
11 BOO537-3479
537-3479 wiIhi1
within the
the state
state of
of OhIO
Ohio
11 1216
16) 961-3500
within
the
216
ar:ea
code
961-3500
within
the
216
areacodeU.S.A.
or
. .
outside
the
continental
.
IX'
wtOOhlsdefebtiveor(b).
fortiledefect1veEqulpment,less1/12pfthepurchaseplicefe>r.
each
month
between
the
date
of the
Manual
the authorized
B. Contact1ha
authorizedCapItol
Cap/tolBingo
BIngoEquIpment
EquIpmentDistribuDistributor
tor from
from whom
whom you
you purchased
purchasedthe
the EQuipment.
EQuipment.
C.
C.Contact
Contactthe
theCapItol
CapitolBingo
BingoEquipment
EquipmentSeryIoe
ServloeManager
Manageratat
the
convenient
listed
the 1)'10st
~
convenientphone
phone numlJer
~
Ustadbelow:
below;
If the EquipmentsupplieddoeSnot oontormto the linIted
Warranty
Operator's
B. Contact
heren are in ieu of and exckJde
aI otherwalT8r'iies,
guanm.
tees or representations,
express
operation
of law or othelWise.
to your
A. shooting
Refer
to your
Operator's
Manual
and
foIIoy"rthe Trouble..
shooting Table
Table within
within the
the "Selvtce
"Service Section,"
Section.
pose.or againstInfringementof any patent).~cept as ex-
.
outside
the
continenIaI
U.S~
961-3641fax
.11 (216)
(216)961-3641
fax number
number in
In Cleveland,
Cleveland.Ohio
Ohio
.
. . SEfM.
CE CALLS
... SERVICE
CAlLS WHICH
WHICH DO
DO NOT
NOT INVOLVE
II'NOLVE DEFECTIVE
DEFECTIVE
MATERIALS
MATERIALS OR
OR WORKMANSHIP
WORKMANSHIP AS
AS DETERMINED
DETERMINED ErY
BY
AAPD/IIIN
ITS
SOl£
DISCRET1ON.
ARE
NOT
AAROW IN ITS SOI£ DISCRETlON, ARE NOT COVERED
COVERED.
COSTOFSUCHSERVIOECALLSARETHERESPONSIE!Il.m
COSTOF SUCH SERV1CE
CAll.S ARE THE RESPONSIBIUTY
OF
OFTHE
THE PURCHASER.
PURCHASER.
Arrowwantsyouto remaina satisfiedcustomer.If a problerr
Arraw wants you to remain a satisfied customer. If a problem
occurs that cannot be resolved to your satisfaction. please
contact us Immediately.Phoneone of the numbers listedabove
or write to:
.
Capitol Bingo EquIpmentDivision
.c/o
5. Warranty Voided
Nry obligations at MOW under this Umited Warranty will be
deemed to have. been satisfied If anyone other than an
authorized Capitol Bingo Equipment Dealerservlces the Equlp-
mant.
SenatorTM Bingo System Manual
NatIOnal Service Manager
9900 Clinton Rd.
Cleveland, Ohio 44144
Pt88SGbe sure to 1nck1dethe name. model nl.fT1ber.serial
number, date of original purchase, and the distributor from
whom you purchasEKIthe Equipment, as well 8S any actions
taken to correct the problem.
~
~'
CAPITOL BINGO EQUIPMENT
From Arrow International, Inc.
HIGH QUALITY EQUIPMENT MANUFACTURED
TO BE YOUR FOUNDATION FOR SAFETY,
RELIABILITY AND SERVICE
WARNING:
You must complete and
return the enclosed
warranty card immediately
in order to insure proper
warranty coverage.
This manual was accurate
at the time of printing.
Arrow International reserves
the right to make changes
due to the changing technology
and regulations.
Please consult your distributor
or Arrow International, Inc.
for any discrepancies.
ARROW INTERNATIONAL, INC.
ARROW GAMES (CANADA) INC.
9900 Clinton Road, Cleveland, Ohio 44144
(800) 321-0757 outside Ohio, but within the U.S.A.
(800) 537-3479 within the state of Ohio
(216) 961-3500 within the 216 area code or outside the continental U.S.A.
(216) 961-3641 U.S. FAX
(800) 387-7621 within Ontario
(519) 770-4621 outside Ontario, but within Canada
(519) 770-4872 Canada FAX
www.arrowinternational.com
www.arrowgames.com
©2010 Capitol Bingo Equipment Division of Arrow International, Inc.