Features and Benefits - industrial energy solutions

Transcription

Features and Benefits - industrial energy solutions
Frigi-Tech™
Space Age Refrigeration Compressor Lubricant
Specifically blended to ensure higher cooling capacities and to lower energy consumption
__________________________________________________________________________________________
___________________________
Air conditioning and refrigeration system loads can drastically
increase electric energy consumption and operating costs. As
these systems get older, sludge build-up trapped in lines,
condensers and evaporators as well as heat and pressure from
internal friction make them become less efficient and speed up
system degradation. Maintenance becomes more common and
costly, as parts and even entire systems must be replaced.
A pioneer in the energy technology industry since 1978, Energy
Automation Systems, Inc. (EASI) uses Frigi-Tech as a trusted
component of its electrical energy conservation program.
Designed for use in hermetically sealed systems, Frigi-Tech
reduces heat from friction, improves heat transfer and gives new
life to every internal component.
Frigi-Tech is a quick, simple and cost effective way to lower the
operating and maintenance costs of refrigeration systems
resulting decreased electricity consumption by increased cooling
capacity and reduced compressor load. Frigi-Tech is the
culmination of years of advanced lubricant research and testing
and is specifically engineered for severe service environments.
By adding only 10% by volume mixture of Frigi-Tech with the
compressor’s refrigeration oil, energy costs typically drop from
8% to 20%. A system treated with Frigi-Tech will show an
immediate, noticeable improvement. Using Frigi-Tech is highly
recommended for ammonia refrigeration systems.
WWW.INDUENERGY.COM
Energy Automation Systems Incorporated 145 Anderson Lane, Hendersonville, TN USA 37075 tel: 615.822.7250 fax: 615.822.7252
Frigi-Tech™
Space Age Refrigeration Compressor Lubricant
Specifically blended to ensure higher cooling capacities and to lower energy consumption
__________________________________________________________________________________________
_
Frigi-Tech uses five types of additives to improve a
Photomicrograph of Bearing Damage (1000 x)
compressor’s mechanical efficiency thereby reducing
power consumption including: anti-wear additives,
oxidation inhibitors, corrosion inhibitors, surfactant
agents, and conditioners.
Rough surface before Frigi-Tech™ treatment
By increasing a system’s thermal efficiency, Frigi-Tech
increases its cooling capacity allowing it to perform the
same amount of work in fewer hours, translating into
significant energy savings. The reduced wear and tear
that accompanies the improved system operations
naturally extends equipment life and reduces overall
maintenance costs.
Features and Benefits:
·
Friction reduced after Frigi-Tech™ treatment
This friction-activated additive can actually eliminate
minor bearing defects and rough spots. The results
are clearly shown in the above photomicrographs
comparing the cross-sections of two roller bearings
magnified 1000 times. Both bearings were subjected
to the same loads and both received the same
amount of bearing wear. After the bearing in the
lower photo was damaged, a small amount of FrigiTech was added to the machine. After the addition of
Frigi-Tech the same bearing was subjected to
additional heavy loads, the friction-activated additive
was triggered, and the bearing surface was polished
to a mirror finish.
·
·
·
·
·
·
·
·
Reduces compressor load by improving heat
transfer and internal friction
Reduces energy consumption
Protects internal components
Provides oxidation and corrosion protection
Provides stabilized boundary lubrication
Eliminates sludge build-up
Extends compressor life
Designed for hermetically closed systems
Recommended for ammonia refrigeration
WWW.INDUENERGY.COM
Energy Automation Systems Incorporated 145 Anderson Lane, Hendersonville, TN USA 37075 tel: 615.822.7250 fax: 615.822.7252