Simrad Autopilot, Gyro Compass and Heading Sensor Solutions

P RO F E S S I O NAL S E R I ES
Simrad Autopilot, Gyro Compass and
Heading Sensor Solutions
WWW.SIMRAD-YACHTING.COM/PROFESSIONAL
2
Simrad Professional Autosteering and Gyro Compasses
SIMRAD PROFESSIONAL
The Simrad Professional portfolio offers a comprehensive range of marine electronic products spanning instruments, autosteering,
gyro compasses, navigation systems, radar, communications and safety. Simrad Professional products are synonymous with
sophistication and rugged reliability, providing tried and trusted solutions for a wide range of professional applications. With more
than 60 years experience of developing quality products, Simrad are well positioned to meet the needs of today’s professional
mariners.
S I M R A D P R O F E S S I O N A L A U TO S T E E R I N G A N D GY R O C O M P A S S E S
Simrad autopilots are developed to provide commercial vessels, large yachts and megayachts with the highest standards of reliability
and the functionality needed in a professional environment.
The Simrad Gyro Compasses are the most reliable Gyro Compasses on the market and with no liquids to change every other year
like most other gyro compasses, they are virtually maintenance free.
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
AP35 Autopilot
3
Solid, rugged and simple to operate with a dedicated WORK mode.
Simrad AP35 Autopilot is developed with the particular needs of the professional
mariner in mind. Fishing vessels will find a perfect partner in the AP35. The control
unit is made of solid marine grade aluminum, and the AP35 presents you with
features mentioned. Reliability is what counts after all. A full selection of remote
controls and steering levers is available.
AP35 Autopilot
A P 3 5 K ey F eatures
A P 3 5 B A S I C S ystem
Simple operation
RC25 Rate
Compass
Reliability
Dedicated WORK mode
RF300 Rudder
Feedback
Multistation capability
Interfaces to: Magnetic, fluxgate or gyrocompass
J3XX
Junction Unit
AP35 Autopilot
Optional Rate Compass
Radar Heading Interface
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
Part Number
Description
000-10117-001
AP35 Pack 1 (AP35, J3000X, RF300, without
heading sensor)
000-10118-001
AP35 Pack 2 (AP35, J300X, RF300, RC25)
000-10119-001
AP35 Pack 3 (AP35, J300X-40, RF300, RC25)
T Y P I C A L S I M R A D P R O F E S S I O N A L a P 3 5 SYS T E M
RC25 Rate
Compass
AP35 Remote
Control Unit
AP35 Control Unit
QS50
RI35 MK2
Rudder Angle
Indicator
RGC50
Boats Magnetic
Gyro Compass
Compass
NSE GPS/
Chartplotter
S35 NFU
Lever
FU50
Lever
JS10
Lever
R3000X
Remote
Control
MX575A DGPS
Compass
RFC35 Fluxgate
Compass
GI51 Gyro
Interface
CDI35
Interface
Reversible
Pump
Solenoid
Valve
J3XX
NMEA Heading Sensor
RF300
Rudder
Feedback
RF45X
Rudder
Feedback
System Components
System Variables
System Expansion
Basic System
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
4
AP50 Autopilot
The Simrad AP50 offers the ultimate in autopilot performance
for vessels over 50 feet. More than 60 years of experience and
development is embedded in the most comprehensive of all pilot system
packages. It offers a wide range of controls, displays and interfaces
to build up a complete bridge steering system suitable for commercial
craft, super and mega yachts, power and sailboats. You will find all the
features you would expect from a true commercial pedigree.
The steering algorithms in the AP50 is the result of over 60 years of
steering experience. The special Auto Heading Capture is based on
experience with the offshore market. The AP50 will provide precise
AP50 Autopilot
steering, using the least amount of rudder movements necessary.
Save fuel and wear on the steering-gear with the Adaptive Sea state
Filter, Automatic rudder offset, Adaptive rudder deadband, Adaptive speed response, Second compass for course monitoring and
Adaptive pump speed.
The WORK mode of Simrad autopilots has been taken to an even higher level in the AP50 autopilot. The Auto Work mode
is an automatic steering mode to be used under operational conditions, different from those normally found when a vessel is
in normal transit on a pre-set course. Examples are trawling, towing, being towed, trolling on one engine, slow speed etc. As
GPS Chartplotters and Electronic Charting Systems (ECS) have become standard equipment on most vessels today, this Work
feature has now been implemented in the AP50 navigation mode resulting in a Nav Work mode. Combined with a bow-thruster,
navigational steering is now possible at low speeds previously considered unsuitable for autopilot use.
A P 5 0 K ey F eatures
Excellent steering performance
Part Number
Description
000-10122-001
AP50 Pack 1 (AP50, J50, RF300, RC25)
000-10121-001
AP50 Pack 2 (AP50, J50, RF45X, without
heading sensor)
000-10120-001
AP50 Pack 3 (AP50, J50, RF300, without
heading sensor)
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
Two complete sets of ­preprogrammable
steering parameters
Multiple combination of dual compass
Thruster control for improved low speed manoeuvring
Wheelmark approved including HSC, US
coastguard approved
A P 5 0 B A S I C S ystem
GC80 / GC85
Gyro Compass
RF45X Rudder
Feedback
AP50 Autopilot
J50 / J50-40
Junction Unit
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
5
T Y P I C A L S I M R A D P R O F E S S I O N A L a P 5 0 SYS T E M
CS66 ECS /
CS68 ECDIS
NI300X
GI51
RC25
AP50
AP50
AP51
QS50
FU50
IS70 Rudder /
IS80 Rudder
Robnet
RI35 MK2
Radar
CLK/Data
MX575A DGPS
Compass
GPS/Chartplotter
(NSE, NX...)
Ext. Alarm
Mains
J50/J5040
AD50
TI51
Gyro Compass
GC80/GC85
S35
JS10
R3000X
S9
Panorama
MK2
Non Simrad
Compass
NMEA Data
Reversible
Pump
Boats Magnetic
Compass
CD100A
Solenoid
Valve
CDI35
2-wire freq.
2-wire freq.
RF300
RF45X
RF14XU
U C
Popular Simrad features like
U-turn and C-turn
Use the QuickStick to maneuver
The QS50 will, by a single press on
from the dock or mooring, point
a button, also engage the thruster.
and push the stick forward, and
You can activate both rudder and
head for your destination
thruster or thruster only
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
6
AP50 Plus Autopilot
With the new range of distribution units, the AP50 Plus can interface with almost any magnetic compass, gyrocompass, steering
gear and navigation receiver. The new system is Wheelmark approved for commercial vessels including HSC.
AP50 Plus has been designed to produce very accurate steering under autopilot control. The autopilot has been programmed to
learn how the rudder responds to commands. This both reduces rudder activity and ensures that the rudder is positioned exactly
as required, so eliminating rudder overshoot. It also compensates for wear and play in the steering gear, which can be of particular
importance when using AP50 Plus as a retrofit autopilot. Precise course keeping is guaranteed due to the ability to set all
parameters on the AP50 Plus individually with a high level of fine tuning.
The AP50 Plus can be built up as a part of a complete steering system
for all types of vessels. A combination of steering levers, rudder angle
indicators and gyro repeaters can be used to create an integrated steering
station on the bridge.
As an optional feature, the AP50 Plus can be configured to control a bow
thruster. Rudders are inefficient at the slow speeds often required by
dredgers and survey vessels. A vessel can, however, maintain an accurate
heading by automatic control of a bow thruster through the AP50 Plus
autopilot.
AP50 Autopilot
The configuration possibilities of Simrad autopilots, made by the selection
of specific modules, will cover all applications, from small inshore fishing boats to large ferries and survey ships. Flexibility in
system choice covers all retrofit applications.
The AP50Plus can be built up as a part of a complete steering system for all types of vessels. A conmbination of steering levers,
rudder angle indicators and gyro repeaters can be used to create an integrated steering station on the bridge.
The AP51 portable remote control may simply be plugged in to the network and it is ready to use. The remote will provide total
portable control over the autopilot system including direct thruster control.
With the QuickStickTM connected, the autopilot performance and functionality can be greatly enhanced. Features and benefits are
easily available without having to be within reach of the AP50 main station.
A P 5 0 plus K ey F eatures
Excellent steering performance
Part Number
Description
000-10123-001
AP50+ Pack (AP50, JD53, without heading
sensor)
Simple operation with dedicated push buttons
and the innovative QS50 Quickstick operation
A P 5 0 P L U S B A S I C S ystem
Two complete sets of ­preprogrammable
steering parameters
Multiple combination of dual compass
GC80 / GC85
Gyro Compass
Interface to virtually any type of steering gear
Thruster control for improved low speed manoeuvring
Ruggedized Autopilot computer
Dual galvanic isolated analog output
AP50
Dual galvanic isolated solid state
19-40V DC / 110V DC / 110/220V AC output
JD5X Junction Unit
Wheelmark approved including HSC.US coastguard
approved
OR
RF45X Rudder
Feedback
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
RF14XU
Rudder Feedback
7
T Y P I C A L S I M R A D P R O F E S S I O N A L A P 5 0 P L U S SYS T E M CS66 ECS /
CS68 ECDIS
GI51
NI300X
AP50
AP50
AP51
QS50
FU50
IS70 Rudder /
IS80 Rudder
Robnet
RI35 MK2
System Select
MX575A DGPS
Compass
Radar CLK/Data
Ext. Alarm
24 VDC Mains
GPS/Chartplotter
Gyro Compass
(NSE, NX...)
GC80/GC85
TI51
JD5X
S35
JS10
R3000X
S9
Panorama
MK2
Non Simrad
Compass
NMEA Data
Steering gear 1
Electronics
Boats Magnetic
Compass
CD100A
Steering gear 2
Electronics
CDI35
2-wire freq.
2-wire freq.
RF45X
RF14XU
D istribution units for steering gears : JD50
Solid state switching of 2 independent
sets of directional valve solenoids.
19-40V DC, 3A
JD51
110V DC, 1A
JD52
110/220V AC, 1A
JD53
Two galvanic isolated output control
signals of +/- 10V DC, 4-20 mA or a
control signal that can be adjusted within a
certain range of an input reference voltage.
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
8
Remotes
qs 5 0 remote control unit
With the QuickStickTM connected, the autopilot performance and functionality can be greatly enhanced.
Features and benefits are easily available without having to be within reach of the AP50 main station.
•
NFU steering with automatic Centring of rudder
•
Rudder and thruster control
•
Mode selection
•
Course change
•
Heading capture
• Status LEDs
Status LEDs adapted to day and night vision monitor the operation and flash a warning if particular attention
is required. QuickStick is weather and water proof for outdoor operation.
Part Number
Description
22089494
QS50 Controller: 2-axis joystick for armrest and
flush mounting. Mode change (except into Nav),
NFU with quick rudder center function, and course
change in Auto mode. Note: QS50 does not provide
FU steering
QS50
Remote Control
A P 5 1 R emote control
The AP51 portable remote control may simply be plugged into the network and it is ready to
use. The remote will provide total portable control over the autopilot system including direct
thruster control.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number
Description
20214052
AP51 Remote Control: With standard mounting kit
AP51
Remote Control
S 3 5 steering control
NFU steering lever. Two sets of micro switches. Illuminated mode button provides power steering or course
change. Outdoor mounting; IP56 (splash proof) protection.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number
Description
23241227
S35 Non Follow Up Steering Lever: Spring loaded.
Designed for indoor/outdoor mounting. Illuminated
mode button.
S35
Steering Control
s 9 steering control
NFU Steering lever. For indoor/outdoor, panel/bulkhead mounting. Can operate solenoids directly. Facility
for priority steering and mode change on AP50 autopilots. Lever mid-position has lock mechanism.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number
Description
23601800
S9 Steering Lever (NFU): Indoor/outdoor panel
bulkhead mounting. Can operate solenoids directly.
Facility to change mode on autopilot.
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
S9
Steering Control
9
F U 5 0 follow - up S T E E R I N G lever
The FU50 Follow-up steering lever features a unique non linear dial (scale) to allow precise rudder
control around rudder mid position, with 5° rudder angle markings. The rudder will move and stop at the
angle selected on the dial. The FU50 has a mid-position indent, buttons for (limited) mode selection, and
mode indicators (STBY, FU, AUTO, NAV, WORK, and THRUSTER). It is designed for indoor and outdoor
bulkhead- or panelmounting.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number
Description
20214037
FU50 Follow Up Steering Lever; with mode buttons
for FU, STBY and AUTO for indoor/outdoor
mounting. Illuminated mode indicators. For use with
AP35 and AP50 only.
20214375
FU50 Follow-up
Steering Lever
FU50 Flush Mount Kit NEW: For use with the
upgraded FU50 steering levers. Fits FU50 rev EA
and higher. 144mm x 144mm aluminum matches
size of RI9.
RI35 Mk2
The RI35 Mk2 Rudder Angle Indicator gives a continuous reading of the rudder position up to 45 degrees on either side of the
amidships position.Designed to operate from frequency or current input signals, generated by a Simrad autopilot feedback unit, the
RI35 Mk2 will also accept a NMEA 0183 rudder angle (RSA) signal.
Manufactured in noncorrosive aluminium with a nonreflective black finish, the instrument is a standard
modular size (132 x108 mm) to match the Simrad AP35 autopilot. A front panel key is used for
illumination and setup. The splash proof construction allows panel, bulkhead or bracket mounting in
exposed locations, such as bridge wings as well as wheel house and engine room.
WHEELMARK APPROVED FOR AP50 AND AP50 PLUS SYSTEMS
Part Number
Description
22085146
RI35 MkII Rudder Indicator. RI35MK2 Rudder Angle
Indicator; Designed for indoor/outdoor mounting.
Operates with RF300, or RF45X feedback units.
Maximum of four units if operated on frequency; two
units if operating on current.
RI35 Mk2 Rudder
Angle Indicator
P anorama R A I ( R U D D E R A N G L E I N D I C AT O R )
The Panorama Mk2 Rudder Angle Indicator is designed for overhead mounting on the bridge. The splash proof ABS/PC blend
cabinet contains 3 identical scales, for accurate reading of rudder angles from any position in the wheel-house. The indicator is
designed for rudder angles up to 45 degrees on either side of midship position.
Part Number
Description
22060966
Panorama U45 Rudder Indicator. Panorama
Mk2 (45°-0-45°). 3-way indicator. For overhead
mounting. Adjustable dial light. 24 V. “U” version for
voltage input. Works with RF14XU only
Panorama U45
Rudder Angle Indicator
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
10
Drive Units
R P U 8 0 , R P U 1 6 0 and R P U 3 0 0 R E V E R S I B L E P U M P
Hydraulic steering systems are now being used in every category of vessel. In many respects hydraulic steering is preferable to
mechanical steering. Hydraulic systems normally comprise of two main components, a steering wheel pump and steering cylinder(s).
The steering wheel pump may be either a gear pump or a plunger pump. Which ever type is installed, steering is achieved by turning the
steering wheel in either direction causing oil from the wheel pump to be supplied to the appropriate side of the cylinder. Oil is returned
via the opposite side of the cylinder back to the pump.
The linear motion of the cylinder rod is transformed to a rotary motion by the tiller, which turns the rudder shaft and rudder. Check valves
(non-return valves) are usually incorporated to prevent the rudder driving the steering wheel pump. If an autopilot is to be included in
such a hydraulic steering system, then the oil flow providing the rudder movement must be controlled by electrical signals from the
autopilot. The maximum flow rate of RPU80, RPU160 and RPU300 is 0,8 l/min., 1,6 l/min. and 3,0 l/min. respectively, measured at a
pressure of 10 bar with nominal voltage (12 VDC) on the motor terminals.
R pu 8 0 reversible pump
Part Number
Description
21116165
RPU-80: Reversible Pump for cylinder size 80 - 200
cu.cm. (4,9 – 12,2 cu.in.)
RPU80
R pu 1 6 0 reversible pump
Part Number
Description
21118203
RPU-160: Reversible Pump for cylinder size 160 400 cu.cm. (9,8 – 24,4 cu.in.)
RPU160
R pu 3 0 0 reversible pump
Part Number
Description
21118211
RPU300-12 V: Reversible Pump. For cylinder size
320 – 740 cu.cm. (19,5 – 45,2 cu.in.)
21118476
RPU300-24 V DC: Reversible Pump. For cylinder
size 320 – 740 cu.cm. (19,5 – 45,2 cu.in.)
RPU300
Rudder Feedback Units
RF14XU RUDDER FEEDBACK UNIT
The rudder feedback unit transmits a signal proportional to the rudder angle. It is mounted close to the
rudder stock and is mechanically connected to the rudder by a transmission link in a 1:1 ratio.
The RF14XU Rudder Feedback Unit consists of a glass reinforced non-flammable polyester housing
with a mounting plate of sea-water resistant aluminium. It contains a potentiometer, limit switches and an
electronic drive module.
RF14XU
Output is either a voltage varying ±9 volts around half the supply voltage, or a frequency signal with 3400
Hz for use with a Simrad autopilot. The shaft of the Feedback Unit is free to travel 360 degrees, but only
±90 degrees from midposition are used for signal control. RF14XU is equipped
with two sets of micro switches, which can be used as electrical limit switches for
Rudder Indicator Compatibility
the steering gear.
Rudder Feedback
Part Number
Description
22506950
RF14XU Heavy Duty Feedback Unit; Long life
feedback unit with transmission linkage. Separate
output for rudder angle indicators. Double set of
limit switches. Requires 24VDC supply voltage.
Unit
RF14XU
IS80/IS70
Rudder
RI35 Mk2
Panorama
•
•
•
RF45X
•
RF300
•
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
RF45X RUDDER FEEDBACK UNIT
11
The RF45X is a medium duty rudder feedback unit. It is a repairable rather than a potted “throw
away” item. The RF45X has “universal” frequency output which can be used with both AP35 and
AP50, and the older AP45 and AP9 without the use of internal jumpers.
Part Number
Description
22011415
RF45X Rugged rudder Feedback Unit; with
transmission link and 2m Cable.
RF45X
R F 3 0 0 R udder F eedback
The RF300 is a medium duty rudder feedback unit which connects directly to the Autopilot
Pilot Computer using 2 wire frequency interface.
Part Number
Description
20193744
RF300 Rudder Feedback Unit: with transmission
link and 10m Cable.
RF300 Rudder Feedback
Heading Sensors
C D 1 0 0 A course detector
Magnetic compass course detector to be mounted under the boats own compass. Used together with CD135.
Part Number
Description
20106688
CD100A Course Detector; with 5m. Cable. Magnetic
course detector with tripod holder for overhead and for
conventional magnetic compass.
C D I 3 5 dedicated magnetic compass interface unit
The CDI35 is used with CD100A only. It converts the Sine/cosine signal from CD100A into a two-wire pwm signal, similar to the
RFC35 Compass. Also used with AP35.
Part Number
Description
22087001
CDI35 Course detector interface. Interface unit to
connect autopilot to magnetic compass with CD100A
or CD109 course detector.
R C 2 5 rate compass
The Simrad RC25 Rate Compass is used with AP35 and AP50 (Robnet). Fluxgate compass with
integrated rate of turn sensor. Utilizes a solid state rate sensor and a magnetic fluxgate sensor. Provides a
dramatic improvement to the dynamic performance of both the autopilot and a stabilized radar display.
Part Number
Description
22084438
RC25 Rate compass; High performance fluxgate
compass with integrated rate gyro provides more
stable heading, with 15 m cable
RC25
R F C 3 5 fluxgate compass
Simrad RFC35 Fluxgate Compass can be used with AP35 and AP50 (Two wire pwm)
Part Number
Description
22086995
RFC35 Electronic fluxgate compass; with 15 m cable
RFC35
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
12
GC80 and GC85 Gyrocompasses
The Simrad Gyro Compasses are the most reliable Gyro
Compasses on the market and with no liquids to change every
other year like most other gyro compasses, they are virtually
maintenance free. A wide range of control units provide complete
flexibility of system configuration for new installation and easy
retrofit into existing repeater systems. The standard range of
interfaces can easily be expanded to provide signals for all vessel
applications. The distribution of power and heading signals from
the control units enables practical installation and easy retrofit.
The unique technology in the GC85 and GC80 gyrocompasses
eliminates “practically” the need for annual service. The GC85 and
GC80 are fully IMO approved for standard and High Speed Craft
(GC85) and can be configured in a dual gyrocompass system.
The highest possible accuracy and stability is provided from new
technology, by sophisticated and fully sealed sensitive element.
GC80, GC85 and RGC50 Gyrocompasses
The Simrad GC85 and GC80 gyrocompasses are the ideal
solutions for the advanced DP system needed in offshore industry. Shipowners as well as DP system providers all over the world
have learned that the Simrad GC series gyrocompass offers the most flexible gyro compass solution on the market. A combination
of a Dual- and an Expanded system, consisting of all together three gyro compasses will offer a DP vessel all the heading and
control information needed for effective operations under the most harsh conditions. The simple and quick installation and set-up
process as well as the fact that no annual service is required makes a Simrad gyro system the best solution for any 24/7 operator.
The world wide service and warranty network ensures extra support whenever needed.
gc 8 0 and gc 8 5 K ey F eatures
Unique, new technology, sensitive elements require no
annual servicing
Part Number
Description
27101617
GC80 Compact Gyro system
GC80 Exp Sys
GC80 Expanded Gyro System
GC80 Dual Sys
GC80 Dual Gyro System with changeover switch
Very low RPM reduces wear and increases lifetime
GC85 Comp Sys
GC85 Compact Gyro System
Swappable sensitive elements for onboard service
GC85 Exp Sys
GC85 Expanded Gyro System
No oil change and quick installation
27102169
Second GC80 Master Compass and GC80
Sensitive Element
27102177
Second GC85 Master compass including sensitive
element
Sealed sensitive element
High follow-up rate
Full 2 year warranty
GC80 approved according to IMO A.424(XI) performance
standards for gyro-compasses
GC85 approved according to IMO A821(19) performance
standards for gyro-compasses for high speed craft
C ontrol U nits
Compact
EXpanded
Dual
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
GC85 Gyrocompass
HR80 Heading
Repeater
G C 8 0 / 8 5 basic S ystem
AR81 Bearing
Repeater
UP
SimNet
SimNet
AT10HD Converter
White
Brown
Yellow
Green
Rx+, A
Rx-, B
Tx+, A
Tx-, B
From NMEA
"Talker"
To NMEA
"Listener"
GC80 / 85
Gyro Compass
SimNet
Control Unit
Part Number
Description
24005936
AT10 Two way general NMEA 0183 to SimNet
converter
27107523
HR80 Heading repeater
NMEA 0183
Repeater
A R 8 1 bearing repeater
A full range of analog and digital repeaters are available for all vessel applications. Analog, digital and bearing
repeaters can be used with all Simrad gyrocompasses. All repeaters are water resistant for external use.
Part Number
Description
27101732
AR81 Single scale Bearing Repeater NMEA.
To be mounted in BB holder, MB Holder or BH
stand. IMO A424.
Wheelmark approved for GC80/ 85 gyro systems
RGC50 Compact Gyrocompass
AR81 Bearing
Repeater
The small, compact ”all in one” RGC50 Gyrocompass is designed for smaller vessels and nonIMO applications.
The RGC50 is a compact gyrocompass, designed to enhance the navigation capabilities on
small commercial, fishing vessels, and large pleasure yachts. A gyrocompass eliminates the
inconvenience and limitations of magnetic compasses, and provides a variety of electrical
outputs to supply accurate and consistent heading information to other navigation equipment.
The capabilities and precision of the RGC50 will provide exceptional heading information to the
navigation equipment installed on your vessel.
Part Number
Description
27102185
RGC50 Gyrocompass for small vessels. Built in
timer.
000-10124-001
RGC50 Pack (RGC50, GI51)
RGC50 Compact Gyrocompass
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
13
14
MX575A DGPS Compass
The MX575A D/GPS compass is designed to provide the
Simrad Professional Autopilots, MX5XX Series navigation
and AIS systems with reliable heading, ROT (Rate of Turn)
and position information. The MX575A delivers a heading
accuracy of better than 0.5° at update rates of up to 10
Hz. It also provides sub-meter DGPS positioning accuracy
at rates of up to 5 Hz when using RTCM correction data
supplied from internal beacon demodulator.
MX575A DGPS Compass
To augment the GPS-derived heading, the MX575A
includes other supplemental devices. The combination
of inclinometer and magnetic sensing devices aid the rate at which a heading solution is computed on startup and also speeds
up reacquisition. A rate gyro provides a secondary source of heading data in times when the GPS heading is not available due to
temporary obstructions. These sensors improve performance and increase dependability of the MX575A. The MX575A features
two independent RS-232 serial ports and one RS-422 port. Either RS-232 port may be configured freely for a variety of NMEA
0183 output sentences or for the input of RTCM correction data from an external source. The output of the RS-422 port mirrors
that of one RS-232 port. It also features COAST™ technology that allows it to use old correction data for up to 40 minutes without
seriously affecting positioning performance. This feature offers peace of mind and allows you to focus on more important issues
than reliability of a differential signal.
M X 5 7 5 A K ey F eatures
Type-Approved as a Transmitting Heading Device (THD)
Part Number
Description
9525-200-80900
MX575A DGPS Compass with 15M Cable
and a Primary Positioning Device
Compatible with MX5XX family of CDUs
Stand-alone automatic operation
Heading accuracy of 0.5°
Heading updates up to 10 Hz
Integrated DGPS sources including WAAS, EGNOS, and
M X 5 7 5 A basic S ystem
Beacon
Sub-meter DGPS accuracy
Fast start-up times
MX500 / 510 Head Unit
Sustained tracking during Rates of Turn up to 90º/s
AT10HD Converter
Sealed enclosure with IP 67 rating
UP
NMEA 0183 V3.0 interface with provision for
SimNet
SimNet
external RTCM SC-104 corrections
White
Brown
Yellow
Green
MX575A DGPS Compass
MX500 / 510
Junction Box
Rx+, A
Rx-, B
Tx+, A
Tx-, B
SimNet
NMEA 0183
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
From NMEA
"Talker"
To NMEA
"Listener"
Technical Specifications
15
ap 3 5 , ap 5 0 and ap 5 0 plus s P E C I F I C AT I O N S AP35
AP50
ap 3 5
AP50
P lus
•
•
•
70x29mm
102x83mm
102x83mm
•
•
Rudder angle bargraph
•
•
•
Adjustable backlight
•
•
•
Dedicated mode keys
•
•
•
Course change, rotary knob
•
•
•
Course change keys,
±1/5/10°Dedicated/Selectable
Dedicated 1°
Selectable 1°,
5 ° or 10°
Selectable 1°,
5 ° or 10°
•
•
Heading capture in turns
•
•
Work mode
Rate/radius turn control
•
•
•
DODGE, resume of previous heading
•
•
•
U-turn, C-turn
•
•
•
NFU/FU Power steering
•
•
•
Automatic tuning (Autotune)
•
•
•
Seastate and parameter speed control
(Automatic/Manual)
A/M
A/M
A/M
Rudder deadband adjust (Adaptive/
Manual)
A
A/M
A/M
Rudder angle calibration
•
•
•
•
Multiple stations
•
•
Remote station lock
•
•
•
•
•
•
•
Master station operation
•
252 mm (9.9”)
•
Dual galvanic isolated solenoid or
analog control interface
•
•
•
Multiple compass input
Thruster Control (TI51)
•
•
•
Multiple NMEA 0183 input/output
•
•
•
•
•
System selector interface (manual/
automatic steering)
Off course alarm
•
•
•
•
•
•
•
Remote alarm station interface
option (NAUT-OSV class)
•
•
IMO - High Speed - Wheelmark USCG approved
•
•
Compass difference alarm
System monitoring alarms
ap 5 0
•
37 mm (1.5”)
57.5 mm (2.3”)
Galvanic isolated solenoid or analog
control (AD50) interface
36mm (1.4")
144 mm (5.7”)
Solenoid or reversible motor control
interface
87 mm (3.4")
152 mm (6.0”)
Analog presentation
216 mm (8.5")
108 mm (4.2")
Multi-language display
Transflective matrix LCD
25.5 mm (1.0”)
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
16
ap 3 5 compatible accessories
Part Number
Description
22085112
J3000X Junction unit: One NMEA0183 input and output port. Heading out at 4 Hz. Controls reversible drive
units and solenoid activated steering systems drawing up to 6 A. (continuous load) 12 or 24 V DC only
22085120
J300X Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port
2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering
systems drawing up to 10 A. (continuous load) 12/24/32 V DC
22085138
J300X-40 Junction unit: Two NMEA0183 input and output ports. Supplies 10 Hz. heading output from Tx. port
2. Radar clock/data interface. External alarm. Controls reversible drive units and solenoid activated steering
systems drawing up to 20 A. (continuous load) 12/24/32 V DC
22084438
RC25 Rate compass; High performance fluxgate compass with integrated rate gyro provides more stable
heading, with 15 m cable
22086995
RFC35 Electronic fluxgate compass; with 15 m cable
22087001
CDI35 Course detector interface. Interface unit to connect autopilot to magnetic compass with CD100A or
CD109 course detector.
20106688
CD100A Course Detector; with 5m. Cable. Magnetic course detector with tripod holder for overhead and for
conventional magnetic compass.
9525-200-80900
MX575A DGPS Compass with 15M Cable
Parts included:
MX575A DGPS Compass Sensor
MX575A Power/Data 15m Cable
MX575A Manual
MX575A Pole Mount
MX575A Fixed Mount
MX575A Mounting Kit
27102185
RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive
element
20213773
GI51 Gyro Interface; Mains 12-40VDC. Input – synchro (1:1 and geared), 20 – 70 VDC step signal, and
NMEA0183. Outputs – NMEA0183 (per source- HDT, HDG, ROT). Simrad clock data, 24VDC step, sine/cosine
(2.5VDC reference).
20193744
RF300 Rudder feedback unit: with transmission link and 10 m cable
22011415
RF45X Rugged rudder feedback unit; with transmission link and 2 m cable
21116165
RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3
21118203
RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3
21118211
RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40)
21118476
RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3
22082929
AP35 Standard mounting kit
22089536
NI300X NMEA 0183 Interface Unit; For installations requiring additional NMEA ports. Features 4 NMEA Rx/Tx
ports, 1 AD10 type heading output port. Order required length Robnet cable separately.
22085146
RI35MK2 Rudder Angle Indicator; Designed for indoor/outdoor mounting. Operates with RF300, or RF45X
feedback units. Maximum of four units if operated on frequency; two units if operating on current.
20214037
FU50 Follow Up Steering Lever; with mode buttons for FU, STBY and AUTO for indoor/outdoor mounting.
Illuminated mode indicators. For use with AP35 and AP50 only.
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
17
Part Number
Description
20214375
FU50 Flush Mount Kit: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher. 144mm x
144mm aluminum matches size of RI9.
23241227
S35 Non Follow Up Steering Lever: Spring loaded. Designed for indoor/outdoor mounting. Illuminated mode
button.
22088165
JS10 Non Follow Up Steering Lever: Two position NFU lever for indoor/outdoor mounting.
22022446
R3000X Hand-held Remote: with 7m. cable and mounting bracket. Provides NFU steering in STBY and Dodge
modes, course changing in Auto mode.
22089494
QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick
rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering
ap 5 0 and ap 5 0 plus compatible accessories
Part Number
Description
20214011
“J50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz heading output from Tx. port 2. Radar
clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units
drawing up to 10A (continuous load) and solenoid activated steering system up to 3A (isolated output). Wheelmark
approved for AP50 systems
20214029
J50-40 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2.
Radar clock/data interface, External alarm, System select Autopilot/Main steering. Controls reversible drive units
drawing up to 20A (continuous load).
20126819
"JD50 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar
clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through
solid state switching of two independent sets of directional solenoid valves. 19-40VDC,3A. Wheelmark approved
for AP50 systems.
20126827
"JD51 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar
clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through
solid state switching of two independent sets of directional solenoid valves. 110VDC, 1A. Wheelmark approved for
AP50 systems.
20126835
"JD52 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2.
Radar clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided
through solid state switching of two independent sets of directional solenoid valves. 110/220VAC, 1A. Wheelmark
approved for AP50 systems.
20126843
"JD53 Junction Unit: Two NMEA0183 input and output ports. Supplies 10Hz. heading output from Tx. port 2. Radar
clock/data interface, External alarm, System select Autopilot/Main steering. Steering commands provided through
two galvanic isolated output control signals of +/-10VDC, 4-20mA., or a control signal that can be adjusted within a
certain range of an input reference voltage. Wheelmark approved for AP50 systems
20214292
Optional Dual Analog board for NAUT-OSV alarm interface in JD5X.
22084438
RC25 Rate Compass; Fluxgate compass with integrated rate gyro provides more stable heading. With 15m. Cable
22086995
RFC35 Electronic Fluxgate Compass; with 15m. cable. Note: Not recommended as primary steering compass for
larger vessels. Can be used as back up/Monitor compass.
22087001
"CDI35 Course detector interface; Interface unit to connect autopilot to magnetic compass with CD100A or
CD109 course detector. Wheelmark approved for AP50 systems.
20106688
"CD100A Course Detector; with 5m. cable. Magnetic course detector with tripod holder for overhead and for
conventional magnetic compass. Wheelmark approved for AP50 systems
27102185
“RGC50 Gyrocompass for small vessels. Built in timer. Including RGC50 Master compass and RGC50 Sensitive
element
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
18
Part Number
Description
20213815
GI51 pendulum ferry feature
22011415
"RF45X Rugged rudder Feedback Unit; with transmission link and 2m Cable. Wheelmark approved for AP50
systems.
22506950
"RF14XU Heavy Duty Feedback Unit; Long life feedback unit with transmission linkage. Separate output for rudder
angle indicators. Double set of limit switches. Requires 24VDC supply voltage. Wheelmark approved for AP50
systems.
20193744
"RF300 Rudder Feedback Unit: with transmission link and 10m Cable. Wheelmark approved for AP50 systems.
21116165
RPU80; Reversible Pump. For cylinder displacement of 80-200 cm3
21118203
RPU160: Reversible Pump. For cylinder displacement of 160-400 cm3
21118211
RPU300-12 V: Reversible Pump. For cylinder displacement of 320 - 740 cm3 (requires J300X-40)
21118476
RPU300-24 V DC: Reversible Pump. For cylinder displacement of 320 - 740 cm3
20212130
AP50 Optional Mounting Bracket
22089189
"TI51 Thruster Interface: Provides signal for operating one thruster by on/off solenoid, continuous control or
Dantoss PVEM valve. Order required length Robnet cable separately. Wheelmark approved for AP50 systems.
20213088
"AD50 Analog Drive: The AD50 provides Analog or Proportional control of a rudder, by either continuous voltage,
or Danfoss PVEM valve signal. Set-up from AP50 Control Unit and communicates via RobNet. Please note that a ±
10V controlled rudder requires no rudder feedback unit. Order required length Robnet cable separately. Wheelmark
approved for AP50 systems.
22085146
RI35 Mk2 45°-0-45° Rudder angle indicator. Operates on RF300, RF45 and RF45X feedback units. Adjustable
illumination. IP56 (splashproof) protection. Can be used as stand-alone with RF45X independent of an autopilot.
12/24V DC. 20 m cable included. Wheelmark approved for AP50 systems.
22060966
Panorama Mk2 (45°-0-45°). 3-way indicator. For overhead mounting. Adjustable dial light. 24 V. "U" version for
voltage input. Works with RF14XU only
20214052
AP51Remote Control: With standard mounting kit. Wheelmark approved for AP50 systems.
22086433
JP21 Bulkhead Socket: For connection of AP51. Supplied with 7m cable.
22022446
R3000X Hand-held Remote Control: With 7m cable and mounting bracket. Provides NFU steering in STBY and
Dodge modes plus course changing in auto mode. Wheelmark approved for AP50 systems.
22089494
QS50 Controller: 2-axis joystick for armrest and flush mounting. Mode change (except into Nav), NFU with quick
rudder center function, and course change in Auto mode. Note: QS50 does not provide FU steering
22089734
Outdoor Mount: Designed for QS50 to fit inside of, for waterproof mounting in exposed locations.
20214037
FU50 Follow Up Steering Lever; for indoor/outdoor mounting. Illuminated mode indicators. Wheelmark approved
for AP50 systems.
20214375
FU50 Flush Mount Kit NEW: For use with the upgraded FU50 steering levers. Fits FU50 rev EA and higher.
144mm x 144mm aluminum matches size of RI9.
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
19
Part Number
Description
23601800
S9 Steering Lever (NFU): Indoor/outdoor panel bulkhead mounting. Can operate solenoids directly. Facility to
change mode on autopilot. Wheelmark approved for AP50 systems.
23241227
S35 NFU Spring loaded Steering Lever: Indoor/outdoor mounting, Hard wired to the junction box. Illuminated mode
button. Wheelmark approved for AP50 systems.
22088165
JS10 Steering lever (NFU): Remote for indoor/outdoor flat panel mounting. Includes 2m cable. Wheelmark
approved for AP50 systems.
ap 5 0 standard junction units specifications
J50
j50-40
Supply Voltage
10-40 V
10-40 V
Reverse voltage protection
Yes
No
Solenoid/Motor drive (continuous/peak)
10/20 A
20/40 A
Solenoid, external supplied
•
Total no. of Robnet control units
Up to 10
Up to 10
NMEA ports (in/out)
2
2
Input for NFU control
•
•
External alarm
•
•
Radar clock / data interface
•
•
System select Autopilot / Main steering
•
•
R eversible hydraulic pump specifications
model
motor
A utopilot
volts
computer
ram capacity
flow rate
MaX
pwr .
boat
min C M 3
ma X C M 3
at 1 0 bar
pressure
consumption
lenght
( cu . in . )
cm 3 / min
bar
50
2.4-6 A
<35ft
60
3-10 A
35-50ft
60
5-25 A
50-70ft
60
2.5-12 A
50-70ft
( cu . in . )
( cu . in / min )
RPU80
RPU160
RPU300
RPU300
12V
12V
12V
24V
AC10
80
250
800
J3000X
(4.9)
(15.2)
(49)
AC20
160
550
1600
J300X
(9.8)
(33.5)
(98)
AC40
290
960
3000
J300X-40
(17.7)
(58.5)
(183)
AC20
290
960
3000
J300X
(17.7)
(58.5)
(183)
A R 8 1 S P E C I F I C AT I O N S E N V I R O N M E N TA L
OT H E R
Mounting:
Dedicated holders or stand
Cable:
1.8 m
Diameter:
246.3 mm \ 9.7 in
Compass Safe Distance:
500 mm \ 19.7 in
Depth:
187 mm \ 7.4 in
Operating Temperature:
-20°C to +60°C
Weight:
4.5 kg \ 9.92 lbs
POWER
Power Supply:
24V DC vDC
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
20
rgc 5 0 , G C 8 0 and G C 8 5 s P E C I F I C AT I O N S Setting time
RGC50
GC80
GC85
< 4h
< 3h
< 3h
+/- 45 deg
Pitch/Roll angle
+/- 45 deg
+/- 45 deg
Follow-up rate
> 36 deg/sec
> 75 deg/sec
> 75 deg/sec
Weight
15.5 kg
23 kg
23 kg
Wheelmark IMO: A424 (XI),
A694 (17)IEC: 60945, 61162
ISO: 8728 (1997)
Wheelmark IMO: MSC97 (73),
13.2.6 (2000 HSC Code) IEC:
60945, 61162 ISO: 6328 (2001)
Type approval
ACCURACY
Settle point error (x secant latitude)
Less than -1.8deg ±
Less than -0.1deg ±
Less than -0.1deg ±
Static error (x secant latitude)
Less than -1.0 deg ±
Less than -0.1 deg ±
Less than -0.1 deg ±
Dynamic error (x secant latitude)
Less than -1.8 deg ±
Less than -0.4 deg ±
Less than -0.4 deg ±
0-50 knots
0-70 knots
range of speed correction
Horizontal acceleration
1m/s2
2m/s2
Annual maintenance
Not required
Not required
Not required
Warranty period
2 years
2 years
2 years
O ptional A C
D AT A O U T P U T S
RGC50
C ompact
( power supply
E xpanded
D ual
for C ompact )
4 x 24V (option 2
Stepper
1 *1
1 x 24V
Serial (NMEA)
1 *1
4 (option 9)
10 (option 15)
10 (option 15)
Syncro
1:1 100V/400Hz
1+4
4 + 10
4 + 10
3
3
16 kg
23 kg
Repeater back-up
x 35 V)
Rate of turn
Weight
7 kg
9 kg
4 (option 2 x 35V)
Data inputs
Serial (GPS)
1
1
1
Serial (External Heading)
1
1
1
Serial (LOG)
1
1
1
1 (200/400p p/
1 (200/400p p/
1 (200/400 p
nm)
nm)
p/nm)
110/220V AC 50
110/220V AC 50
110/220V AC 50
/60Hz
/60Hz
/60Hz
24V DC
24V DC
24V DC
1.5A
1.7A
1.2A
1.4A
Pulse (LOG)
POWER
Power supply
24V DC
24V DC
Backup supply
Current consumption startup (A) 5A
3.3A
Current consumption normal (A) 2A
2.6A
1.4A incl.
Compact
1.1A incl. Compact
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
SERVICE
AREA
mm
mm
SERVICE
AREA
gc 8 0 and gc 8 5 s P E C I F I C AT I O N S 21
mm
BOW
SERVICE
AREA
mm
SERVICE
AREA
mm
mm
mm
SERVICE
AREA
mm SERVICE
AREA
mm
mm
mm
mm
BOW
mm
mm
mm
SERVICE
AREA
mm
mm
mm
mm
mm
BOW
mm
mm
mm
mm
mm
mm
mm
mm
SERVICE
AREA
mm
mm
SERVICE
AREA
mm
mm
BOW
mm
BOW
mm
mm
SERVICE
gc 8 0 and gc 8 5
compact system
AREA
mm
SERVICE
AREA
SERVICE
mm SERVICE
AREA
AREA
mm
mm
mm
SERVICE
AREA
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
m
mm
mm
mm
mm
mm
mm
gc 8 0 and gc 8 5 expanded system
22
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
gc 8 0 and gc 8 5 dual system
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
rgc 5 0 s P E C I F I C AT I O N S 228 mm (9.3”)
1
1
mm
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
321 mm (12.6”)
mm
mm
mm
377 mm (15”)
mm
mm
M x 5 7 5 A S P E C I F I C AT I O N S 23
G P S / N A V I G AT I O N
E N V I R O N M E N TA L
GPS Receiver Channels:
12 channels
DGPS: Receiver Type
L1, C/A code, with carrier phase
DGPS: Position Update Rate
Dimensions:
including mounts)
smoothing
Weight:
1.5 kg \ 3.31 lbs
1 Hz default (Position) up to 10 Hz
Humidity:
100% condensing
heading output
DGPS: Horizontal Accuracy
60 cm (l) x 16 cm (w) x 18 cm (h) (Not
POWER
< 1 m 95% (DGPS), < 5 m 95%
Power Supply:
8.0 to 40 VDC vDC
(autonomous, no SA)
Power Consumption:
< 4.5 W, < 360 mA @ 12.0 VDC
DGPS: Heading Accuracy
< 0.5 degrees rms
Reverse Polarity Protection:
Yes (but not reverse polarity operation)
DGPS: Rate of Turn
90°/s max
Power Data Connector:
18-pin, Environmentally sealed
DGPS: Pitch / Roll Accuracy
< 1 degree rms
DGPS: Start-Up Time
< 60 s typ.
DGPS: Heading Fix
< 20 s
DGPS: Satellite Reacquisition
<1s
DGPS: Frequency Range
283.5 to 325 kHz
DGPS: Adjacent Channel
61 dB @ f° +/- 400 Hz offset
C O M M U N I C AT I O N S
Serial Ports
3 full duplex RS-232 and 2 half-duplex
RS-422
Isolation:
power
Rejection
OT H E R
Bearing Accuracy:
< 0.5 degrees rms
Operating Temperature:
-30°C to +70°C
Operating Temperature Stored:
-40°C to +85°C
All serial ports optically isolated from
Baud Rates:
4800, 9600, 19200
Data I/O Protocol:
NMEA 0183 V3.0
Correction I/O Protocol:
RTCM SC-104
NMEA Heading Messages:
GPHDT, GPROT, PSAT, HPR, GGA, VTG,
ZDA,GSA, GSV, GST, GBS, GRS
M x 5 7 5 A compatible accessories
Part Number
575-500-03
Picture
Description
MX575A DGPS Compass with MX500, and JB (add cable)
Parts included:MX575A DGPS compass sensor, MX575A Power/Data 15m Cable, MX575A Manual, MX575A
Pole Mount,MX575A Fixed Mount, MX575A Mounting Kit, MX500 2 port CDU, MX500 Mount Bracket Kit,
Power/NMEA 3m Cable
MX-500
MX-500 CDU
Parts included: 2 port MX500 CDU, Mount Bracket Kit, Power/NMEA 12-pins 3m Cable, Operator/Installation
Manual, Quick Reference Guide
510-000-0000
MX510 CDU
Parts included: 2 port MX510 CDU, Mount Bracket kit, Power/NMEA 12-pins 3m Cable, Operator/Installation
manual, Quick Reference Guide
512-000-0000
MX512 CDU (also order JB P/N 512-100-1001)
Parts included: 9 port MX512 CDU, Mount Bracket kit, Power/Date 3m Cable, Operator/Installation manual,
Quick Reference Guide
27107523
HR80 Heading repeater
Professional Series Autopilot, Gyro Compass and Heading Sensor Solutions
Sales and Service Worldwide
EUROPE/MIDDLE EAST/
AFRICA
ALGERIA
Algerian Technical Services &
Systems
Lotissement El Bina 142
Dely Ibrahim - Alger 16302
Tel.: 213 21 37 05 56
Fax.: +213 21 37 05 86
ANGOLA
JEMBAS-Assistència Tecnica
Liimitada, Largo Do Soweto 88
Luanda
Tel.: +244 222 637 000
Fax: +244 222 637 038
BENELUX
Simnav BV
Van Hennaertweg 17a
2952 CA Alblasserdam
Tel.: +31 78 6921900
BULGARIA
BS Marine EOOD
Bulstar Str #1
8140 Atia Bulgaria
Tel.: +359 550 422 42
CROATIA
Almar d.o.o.
Porec - Kamenarija 12
52452 Funtana
Tel.: +385 52 445 005
Fax: 385 52 445 276
DENMARK
See Germany
ESTONIA
Admiral Trade OÜ
Regati 1
11911 Tallinn
Tel.: +372 639 89 46
Fax: 372 639 89 30
FINLAND
At Marine OY
Mesikukantie 16
O1300 Vantaa
Tel.: +35 89 5494 2600
Fax: +35 89 5494 2700
FRANCE
Navico France S.A.
Parc d’Activités Ragon,
23 Avenue Pasteur
44 119 Treillieres
Tel.: +33 2 28 01 23 01
Fax: +33 2 28 01 21 43
GERMANY & AUSTRIA
Navico GmbH
Carl-Friedrich-Gauss Strasse 2
24837 Schleswig
Germany
Tel.: +49 4621 96130
Fax: +49 4621 961329
GREECE & CYPRUS
Aegean Electronics S.A.
4, Zosimadon Street.
185 31 Piraeus
Greece
Tel.: +30 210 413 7269
Fax: +302 10 413 7270
ICELAND
Fridrik A. Jonsson EHF
Akralind 2
210 Kopavogur
Tel.: +354 552 2111
Fax: +354 552 2115
ISRAEL
P. Fischeles
Building 62. Ma’agan Hadayig
Kyshin
26298 Haifa bay. Haifa.
Tel.: +97 25444 19379
ITALY
Navico Italia Srl.
Via Benadir 14
20132 Milan
Tel.: +39 02 26149517
Fax: +39 02 8970035
LEBANON & SYRIA
Selcom Marine Sarl.
P.O. Box 55541
Dekwaneh Main Street
Beirut
Lebanon
Tel.: +961 149 1489
Fax: +961 149 5325
MALTA
Medcomms Ltd
4 Msida Rd.
Gzira GZR03
Tel.:+356 21 335521
Fax: +356 21 310820
MOROCCO
Soremar
17 Rue Le Catelet,
Edif. Emilie Zola
21900 Casablanca
Tel.: +212 22 24 82 45/49
Fax: +212 22 24 83 36/52
NORWAY
ProNav AS
Hovlandsveien 52
N-4370 Egersund
Tel.: +47 51 46 43 00
POLAND
Escort Ltd. Electronics Syst.
Grudziadzka 3
70–130 Szczecin
Tel.: +48 91 43 10 400
Fax: +48 91 48 24 777
PORTUGAL
Nautel - Sistemas
Electronics Lda.
Rua Fernando Mendes
Pinto 46
1400-146 Lisboa
Tel.: +351 21 300 70 30
Fax: +351 21 300 70 39
ROMANIA
Navtron Srl
Str. Vasile Marcovici nr. 7
9100130 Constanta
Tel.: +40 241 545 650
Fax: +40 241 555 582
RUSSIA
Simbia Engineering
Company Ltd
4A Verhneozernaya Str.
236018 Kaliningrad
Tel.: +7 0112 215492
Fax: +7 0112 365380
SOUTH AFRICA
Marine Radio Acoustic Devices
P.O. Box 12076
N1 City 7463
Cape Town
Tel.: +27 21 559 4003
Fax: +27 21 559 2752
SPAIN
Navico Marine Electronics S.L.
Pol. Ind. Finestrat nave 14
Avda. Pais Valenzia 28
03509 Finestrat (Alicante)
Tel.: +34 902 350 750
Fax: +34 902 350 950
SWEDEN
Sportmanship Marin AB
Bolshedens Industriväg 30
427 50 Billdal
Tel.: +46 31 726 14 00
SWITZERLAND
Marine Parts Technics AG
In der Au 5
CH-8406 Winterthur
Tel: +41 52 203 66 55
Fax: +41 52 203 66 56
TUNISIA
Méditerranée Services
Résidence Du Lac Bloc D,
no 11
1053 Les Berges Du Lac
Tel.: +216 71 86 02 01
Fax: 216 71 86 10 23
TURKEY
Promar Marine Equip. Ltd.
Igrip Sokak Gul. Apt. No: 7/2
81030 Fenerbache (Istanbul)
Tel.: +90 216 3460 894
Fax: +90 216 3461 493
UNITED ARAB EMIRATES
Emphor FZCO
P.O. Box 61232
Jebel Ali Free Zone
Dubai
UAE
Tel.: +97 148 830 233
Fax: +97 148 830 133
INDIA
Elektronik Lab
R/13 Navroz Baug, Lalbaug,
Mumbai 400012
Tel: +91 2224 71 5115
Elcome Marine Services Private
Limited
Great Eastern Summit “A”
11th Floor, Plot No. 56, Sector -15
C.B.D. Belapur,
New Mumbai 400 614
Tel: +91 22 676 18000
JAPAN
KGK JAPAN
Relax Building 7F, 2-5-15,
Ogi-Cho, Naka-Ku, Yokohama,
231-0027, Japan
Tel: +81 45 664 7318
Fax: +8145 664 7319
MALDIVES
Maizan Electronics Pte. Ltd
Henveyru, 08 Sosunmagu
Male’ 20012,
Tel: +960 332 3211
NEW CALEDONIA
Altomarine S.A.R.L.
ZT Nouville Plaisance
9 Rue Capitaine BOIS
98846 Noumea BP 14348
Tel: +687 259612
Fax: +687 254330
NEW ZEALAND
Advance Trident Ltd
383 New North Road
Kingsland, P.O. Box 4174
Auckland
Tel.: +64 9 845 5347
Fax: + 64 9 845 5348
UNITED KINGDOM & IRELAND
Navico Ltd (UK)
Premier Way, Abbey Park
Romsey, Hampshire
UK, S051 9DH
Tel.: +44 1794 51 0010
Fax: +44 1794 51 0006
PHILIPPINES
Norwegian Marine Consultancy
Inc.
Bldg. 1, Cebu yacht Club
Pusok, Lapu Lapu City 6015
Tel.: +63 32 34 00 292
Fax: +63 32 34 07 303
ASIA PACIFIC
SINGAPORE, MALAYSIA &
VIETNAM
Jason Electronics Pte Ltd
Blk 194 Pandan Loop #06-05
Pantech Industrial Complex
Singapore 128383
Tel.: +65 6 872 0211
Fax: +65 6 872 1800
AUSTRALIA
Navico Australia Pty. Ltd.
Unit 5, 12 Mars Rd,
Lane Cove NS W 2066
Tel: +02 9936 1000
Fax: +02 9936 1001
CHINA & HONG KONG
CITE Limited
Rm C-E, 16/F, Yan’s Tower
26-27 Wong Chuk Hang Road
Aberdeen
Hong Kong
Tel.: +852 2552 0178
Fax: +852 2873 0679
Peaceful Marine Electronics Co.,
Ltd.
FRoom 1002 Unit 2
No.32 XiAn Road
Shahekou District
Dalian China 116021
Tel: +86 411 84643892
SRI LANKA
International Marine Services
420/23/B1, Welipara,
Thalawathugoda
Sri Lanka
Tel.: +94 717 262 233
SOUTH KOREA
Turn-On Electronics Co.
7th fl. Dong-A Ilbo Bldg.
53-11, 4-KA
Choongang-Dong
Choong-Ku, Busan
Tel.: +82 51 462 3930
Fax: +82 51 462 3089
Navico Operational Headquarters | Donker Duyvisweg 56 3316 BM Dordrecht, The Netherlands
www.simrad-yachting.com/professional
TAHITI - FRENCH POLYNESIA
Tahiti Sport S.A.
P.O. Box 62
98713 Papeete
French Polynesia
Tel.: +689 50 59 59
Fax: +689 42 17 75
TAIWAN
Dragon & Elephant Enterprise Co.
Ltd
12F-4, No. 251
Min Chuan 1st Road
Kaohsiung
Taiwan R.O.C.
Tel.: +886 722 72887
Fax: +886 722 72910
THAILAND
Electrical Marine Co.Ltd
Phuket Boat Lagoon
20/9-10 Moo
Thepkasattri Road,
Koh Kawe, Muang
Phuket 83200
Tel.: +66 76 239 112
Fax: +66 76 239 058
VIETNAM
AMI International Pte Ltd.
Tel.: +65 67 75 00 81
Fax: +65 67 79 78 56
AMERICAS
ARGENTINA
R.C. International
Av. Corrientes 3150 13F
1193 Buenos Aires
Tel.: +54 11 4866 0430
Fax: +51 11 4862 0430
BRAZIL
Electra Service
P.O. Box 111
11410-971 Guarujà
Sao Paulo
Tel.: +55 3354 3599
Fax: +55 3354 3471
CHILE
Robinson Marine Electronics S.A.
Avda. Vitacura 3568 OF 502
Casilla 19012 Cooreo 19
Vitacura Santiago
Tel.: +56 2 207 3059
Fax: +56 2 207 2695
URUGUAY
Electromaritima Uruguaya Ltda
Guatemala 1260
11800 Montevideo
Tel.: +59 82 9247 789
Fax: +59 82 9247 138
USA, CANADA & MEXICO
Navico
410 Amherst Street
Suite 110
03063 Nashua, NH
USA
Tel.: 1-800-628-4487
Tel.: +1 603-324-2042
Navico Torrance
23868 Hawthorne Blvd.,
Suite 201
Torrance, CA 90505
Tel.: +1 310 791 8213
Fax: +1 310 791 6108