UniqueTek Product Catalog

Transcription

PRODUCT CATALOG
UniqueTek, Inc.
540 Iron Avenue
Suite 118
Mesa, AZ 85210
Products for Shooting, Reloading & Competitive Marksmen
Phone: 480-507-0866
Toll Free: 855-507-0866
FAX: 480-507-0867
e-mail: [email protected]
Web Sales: www.uniquetek.com
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
DILLON PRESS ENHANCEMENTS
DILLON PRESS ENHANCEMENTS (cont’d)
™
™
Micrometer Powder Bar Kit (T1231) ............................ $69.95 Powder Measure Drain-N-Change Tool (T1347) ….... $17.95
Replaces the Powder Bar Adjusting Bolt
with a true 40 thread per inch Micrometer!
powder bar not included
• Return Instantly to Any Powder Weight
• Adjustments as small as 1/1000 inch
(Equivalent to 0.02 grains with Win 231)
• Fits all powder bar sizes, plus SL900 Shot Bar.
– Also available preinstalled in a new powder bar. = $119.95
™
Arredondo Powder Drop Slide (T1267-x) …….……... $119.95
With Micrometer Powder Bar Kit™ Preinstalled
• Prevents powder leaking and “galling” with
ultra fine-grained powders (e.g. Vectan SP2)
• 0.7gn to 15gn Powder Drop Range (with Win 231)
™
Toolhead Clamp Kit For Dillon 550/650 Toolheads
and RCBS Pro 2000® / Piggyback™ -2 & -4 Dieplates
• Eliminates loose toolhead-to-frame fit
• Reduces Variation of OAL and Crimp
• Stabilizes Die-to-Shellplate Alignment
$34.95 – Small Kit for 6 toolheads and up to 2 presses (T1230-S)
$39.95 – Small Kit with Tap Handle (T1230-SK)
$44.95 – Large Kit for 13 toolheads and up to 5 presses (T1230-L)
$49.95 – Large Kit with Tap Handle (T1230-LK)
$13.95 – Refill Kit: 16 thread inserts, 8 screws, 8 washers (T1230-refill)
CNC Machined 550/650 Toolheads – by Whidden Gunworks
• Precision Machined from 6061-T6 Aluminum
• Flatter, Truer & Stronger than Original
• More Precise Die Positioning & Alignment
• Available w Toolhead Clamp Kit™ preinstalled
$34.95 – 550 Standard - (T1333-5)
$42.95 – 550 Clamped - (T1333-5C)
$39.95 – 650 Standard - (T1333-6)
$47.95 – 650 Clamped - (T1333-6C)
Floating Die 550/650 Toolheads – by Whidden Gunworks
• Floating Resize & Seat Dies for Reduced Bullet Runout
• Precision CNC Machined from 6061-T6 Aluminum
• Toolhead Clamp Kit™ parts are preinstalled!
$74.95 – 550 Clamped - (T1389-5C)
$79.95 – 650 Clamped - (T1389-6C)
™
Drain powder from powder measure without removing powder
measure from toolhead
or toolhead from press.
The Bin-Dam
™
Utilize 100% of Cartridge Case Bin Capacity!
®
• Fits Securely into Label Slot on AkroBins .
• Durable Aluminum
• Easy Write-On Surface
— Fits 550/650/SDB (4-1/8” wide) Bins: ... (T1359) = $4.95
— Fits 1050 (5-1/2” wide) Bins: ....... (T1359-1050) = $5.95
— Fits SL900 (7” wide) Bins: ............. (T1359-900) = $8.95
Spent Primer Chute ...…………………………………… $29.95
No More Spent Primers on the Floor!
• Replaces Spent Primer Cup
• Primers fall through 3ft Clear PVC Tubing
into Any Convenient Container!
• Simple Installation
— For Square Deal ‘B’: ... (T1346-SDB)
— For RL 550B: .............. (T1346-550)
— For XL 650B: .............. (T1346-650)
— For Super 1050: ......... (T1346-1050)
SDB
550
1050
650
™
The Light-Load – Shellplate Illuminator (T1429) …..….. $9.95
Illuminates shellplate for easy inspection of reloading process.
•
•
•
•
Fits center hole of 550/650 toolhead
Also fits any unused 7/8” die hole.
LED: 5 Lumen (1700 mcd)
1 AAA Alkaline Battery
The Bullet Bin
™
(T1446) …………………………….….… $29.95
An economical alternative to the Dillon Bullet Tray!
•
•
•
•
Holds MORE Bullets than Dillon Bullet Tray
Attaches to Dillon Strong Mount *
®
Bullets are Contained in an AkroBin
Bins are Easily Changed
* Fits 550/650 and SDB Strong Mounts without modification.
Fits 650 Only Strong Mount but requires drilling two ¼” holes.
Foam Grip (T1527) …………………………….………….… $5.95
Fits Dillon Roller Handles!
2X Powder Hopper Tube (T1277-standard) ………..…… $34.95 • Cushions Your Hand
For the Dillon Auto Powder Measure
Replaces the original 7” powder hopper with a
14” hopper tube.*
• Doubles Powder Hopper Capacity
• Strong, Stain Resistant Polycarbonate Tube
• Includes Precision Powder Baffle™
* Super 1050 requires 11” Tube (T1277-1050) = $34.95
™
Precision Powder Baffle (T1278) ………………………... $9.95
For the Dillon Auto Powder Measure
• Provides Consistent Flow of Powder to Powder Bar
• 20 Gage Aluminum / Precision Water-Jet Cut
• Simple Drop-In Installation
• Provides Good “Feel”
™
SOLO Single Stage Press Conversion Kit
For Dillon RL 550B or XL 650 Presses
• Converts Press for Single Stage Operation
• Saves Bench Space & Cost
• Conversion is Easy & Fast
• No Permanent Press Modifications
— For RL 550B Press (T1553-550) = $94.95
— For XL 650 Press (T1553-650) = $98.95
Primer Tube Stand (T1567) ………………….
$19.95
Holds your primer pickup tubes and keeps
them ready at hand when you need them!
®
TURBO-BEARING for Dillon 550 Press (T1281) ……….. $39.95 • Holds 12 Primer Tubes — For Dillon, Hornady.
Smooths indexing and reduces play
and wobble in the shell plate
• Simply Replaces original Index Sprocket
• Includes: Index Sprocket, 1 Thrust Bearing
and 2 Thrust Washers.
RCBS, Redding and Lyman presses.
• Very Stable – Won’t Tip Over
• Can Be Disassembled for Storage
Bullet Seat Stem (T1561-x) ............................................. $14.95
For SWC & FWC Bullets
• Contacts SWC Bullets at Shoulder
Die Wrench for Dillon Presses (T1532) ……………….. $29.95 • Yields Consistent Alignment & Seating
The BEST die wrench for Dillon presses!
•
•
•
•
CNC Machined 10-18 Steel
Zinc Dichromate Finish
Fits Both 1” & 1-1/8” Die Lock Rings
Also Works on LEE Precision Progressive Presses
• Fits Dillon “New Dimension” Seat Dies
• Reversible for Full Wad Cutter Bullets
— .45 cal. (T1561-45)
— .38 cal. (T1561-38)
— .40 cal. (T1561-40)
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
DILLON PRESS ENHANCEMENTS (cont’d)
Mr. BULLETFEEDER
550 Primer Track Bearing (T1571) ................................. $24.95 Mr. Bulletfeeder ........................................................ (T1575-xx)
For the RL 550B Press
•
•
•
•
Extends Support for Primer Bar by 1.4"
Prevents Primer Bar Drooping & Binding
Top Surface Lapped Smooth & Moly Coated
Easy Drop-In Installation
Primer Rod & Holder (T1562) ………….… $24.95
This Aluminum Primer Rod weighs just enough to
“push down” primers for positive feeding!
The Holder gives you a handy place to hang the
primer rod when filling the primer tube.
•
•
•
•
Ensures Positive Primer Feed
Primer Count Indicators at 100, 75, 50 & 25 Primers.
Primer Rod Holder Provides a Place to Hang the Rod.
Works with the Dillon Primer Alarm
650 Live Primer Chute - By UniqueTek (T1306) ……….. $21.95
Eliminated the “Ski Jump” effect … so no more
live primers launching onto the floor!
•
•
•
•
Higher Sidewalls Retains Primers
Easier To Remove Captured Primers
No Tiny Bottle to Fumble With
Direct Replacement for OEM Part
A bullet feeder greatly improves the
efficiency of any reloading press,
making the reloading process easier,
faster and safer. Its patented system is
by far the best performing personal use
bullet feeder on the market.
• Fits on Most Progressive Presses
• Bullet Dropper Fits 7/8"-14 Die Threads
• Complete System Includes:
– Bullet Collator
– Bullet Dropper
– Output Assembly
– Custom Powder Funnel (pistol calibers only)
— 9mm/.38 cal. (T1575-01) = $468.95
— 10mm/.40 cal. (T1575-02) = $468.95
— .45 cal. (T1575-03) = $468.95
— .223 cal. (T1575-04) = $498.95
— .308 cal. (T1575-05) = $498.95
Caliber Conversion Kits ……………………………… (T1568-xx)
Primer Caliber Conversion Kits allow you to use your Mr. Bulleteeder
for multiple calibers. Conversion takes just a few minutes,
Includes:
Loaded Round Counter - By UniqueTek (T1555) …….. $119.95 • 1 Complete Dropper Assembly
• Fits Most Dillon Presses … and
• 1 Collator Plate
Many Other Popular Presses
• 1 Custom Powder Funnel (pistol kits only)
• Counts only Successfully Completed
• 1 Output Assembly – Small (rifle kits only)
Rounds … Not Just Ram Cycles.
• Sensor Mounts on Crimp Die
• Display Mounts on Primer Tube
• Sensor is Easily Moved from
Toolhead to Toolhead.
Swage It S650 (T1568-6) ……………………………….... $129.95
Primer Pocket Swager for the Dillon XL 650 press.
•
•
•
•
•
•
Primer Engineered Specifically for the XL 650 Press
Frame Mounted Swager
Installs in Just Minutes
No Need To Remove Primer Disk or Primer System
Fully Resizes Primer Pocket and Adds Correct Fillet
CNC Machined from Aerospace Stainless Steel
Swage It S550 (T1568-5) ……………………………….... $129.95
Primer Pocket Swager for the Dillon RL 550B press.
•
•
•
•
•
•
Primer Engineered Specifically for the RL 550B Press
Frame Mounted Swager
No Need To Remove Primer Disk or Primer System
Fully Resizes Primer Pocket and Adds Correct Fillet
CNC Machined from Aerospace Stainless Steel
— 9mm/.38 cal. (T1576-01) = $149.95
— 10mm/.40 cal. (T1576-02) = $149.95
— .45 cal. (T1576-03) = $149.95
— .223 cal. (T1576-04) = $168.95
— .308 cal. (T1576-05) = $181.95
Output Assembly ……………………………………… (T1577-xx)
The Output Assembly guides bullets from the Bullet Collator to the
Bullet Dropper. Spring Extension Tubes are
also available.
Sizes:
• Large: for 9mm. ,40 cal. and .45 cal.
• Small: for all Rifle Calibers. and 9mm)
— Large (T1577-01) = $26.95
— Small (T1577-02) = $26.95
— Spring Extension Tube - Large (T1577-03) = $12.00
— Spring Extension Tube - Small (T1577-04) = $12.00
Custom Powder Funnel …………………………….… (T1582-xx)
These Custom Powder Funnels are optimized specifically for the
Mr. Bulletfeeder Bullet Dropper. But they work so well you may want to
use them on all your toolheads ,,, even those that don’t have a
The Original Powder Mirror (T1572-1) ........................... $19.95 Mr Bulletfeeder!
Installs on Dillon and other Progressive and Single Stage Presses
•
•
•
•
Helps you Visually Inspect the Powder Drop
Acrylic Mirror will Not Shatter
Attaches to any Convenient Die
Fits on 7/8"-14 Die Bodies
•
•
•
•
Extends Support for Primer Bar by 1.4"
Prevents Primer Bar Drooping & Binding
Top Surface Lapped Smooth & Moly Coated
Easy Drop-In Installation
— 9mm/.38 cal. (T1582-01) = $36.95
— 10mm/.40 cal. (T1582-02) = $36.95
— .45 cal. (T1582-03) = $36.95
Powder Through Expanders (PTX™)…..………….… (T1580-xx)
If you use the Mr. Bulletfeeder on a Hornady Lock-N-Load® AP™
Powder Measure Stand Adapter (T1571) ....................... $19.95 press, you’ll need one if these specially designed Powder Through
Expanders.
For the Dillon Powder Measure
— 9mm/.38 cal. (T1580-01) = $36.95
By UniqueTek
— 10mm/.40 cal. (T1580-02) = $36.95
— .45 cal. (T1580-03) = $36.95
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
RELOADING ACCESSORIES
RELOADING ACCESSORIES (cont’d)
High-Precision Electronic Powder Scale (T1251) ….. $219.95 Pistol Case Gauges (T1574-x) ........................................ $29.95
Extreme 0.02 Grain Accuracy!
By The Shooters Box
• CNC Machined Stainless Steel
• SAAMI Min. Chamber Specs.
– 9mm (T1574-1)
– .40 S&W (T1574-4)
– 9x18 Makarov (T1574-7) – .45 ACP (T1574-5)
– .38 Super Auto (T1574-2) – .44-40 Win. (T1574-8)
Enhanced Electronic Powder Scale (T1391) …………... $99.95 – .38 Special (T1574-3)
– .45 Long Colt (T1574-6)
•
•
•
•
771 grain Capacity / 0.02 grain Accuracy
Large LCD Display with Backlight
Size: 5.2" x 3.75" x 2.0” / Tray: 1.8” dia
AC Adapter (included) or 4 - AAA batteries
•
•
•
•
•
308 grain Capacity / 0.05 grain Accuracy
2 Interchangeable Clear Flip-Up Covers
Scale Size: 3” x 4.75” / Tray Size: 1.5” dia.
Powered by 3 AAA Batteries (included)
RCBS Powder Pan/Funnel Included FREE
Reload Checker (T1554) ………….................................. $19.95
By UniqueTek
• CNC Machined for Precision
RCBS Powder Pan/Funnel (T1250-P) ….…………………. $8.95 • Stainless Steel for Durability & Stability
• Checks both 45 ACP and .38 Spl/.357 Mag.
Combination Powder Pan and Powder Funnel
• Anti-Static Plastic
• Powder Funnel fits .22 to .50 cal. case mouths
• Dual Handles for Right or Left handed use
SWAGE GAUGE Primer Pocket Gauge ….……………. $11.95
Go/No-Go Gauge for Primer Pockets
• Primer Pocket Depth
Omega 2-Speed Electric Powder Trickler (T1378) …….. $89.95 • Primer Pocket Diameter
Makes trickling easy, not just another chore!
• Vibratory, not rotary for Precise Control
• FAST for “catching up”/ SLOW for
Single-Grain Control
NEW MODEL!
• Adjustable Slide Weight for Tuning Powder Flow Rate
• Adjustable Height to fit any balance beam or electronic scale
• Remote Control Pad keeps hands clear of scale
• Powered by 2 AA Batteries (included)
• Available for: – Small Primers (T1521-S)
– Large Primers (T1521-L)
Case Mouth & Neck Tension Gauge (T1522) ….………. $11.95
Will not distort the round shape of the mouth like calipers can.
• For .224 dia. & .308/.310 dia. Case Mouths
• Works on .223 Rem., 5.56 NATO, 7.62 NATO,
.308, .30-06, 7.62x39 and many more.
SPECIALTY RELOADING DIES & ADAPTERS
Digital Calipers (T1236) ………..……………………….... $29.95
•
•
•
•
•
•
•
Large LCD Display
Stainless Steel
6”/150mm Range
Four-Way Measurements
Auto OFF after 5 Minutes
Protective Case Included
Instant Inch/Metric Conversion
ARIES Powder Ram™- Powder Compression Die …… $44.95
– By UniqueTek, Inc.
Compress powder before bullet seating, thus
preventing bullet distortion and accuracy loss.
• Screw Adjustable Compression
• Standard 7/8-14 Die Body
– Rifle: .224, .243, .264, .284, .308, .38 & .45: (T1308-xxxR)
CTS-30000 Precision Counting Scale (T1445) ………. $214.95 – Pistol: 9mm/.38cal and .45 cal. (ACP, & Colt): (T1308-xxxP)
Advanced Counting Features and 30Kg (66Lb) capacity let you
accurately count bins full of brass, bullets
or loaded ammunition.
•
•
•
•
•
•
•
Capacity: 66.078 lb (30 Kg)
Resolution: 0.001 lb (0.5g)
Units: Kilogram, Gram, Pound, Ounce
Scale Size: 13" x 12.5" x 4.9"
5/8” Tall LCD Displays with Green Backlight
9V NiMH Rechargeable Battery (AC Charger/Power Adapter included)
30-Year Warranty
Quick-N-Easy Impact Bullet Puller (T1428) ……………. $19.95
* To order, substitute caliber for the “xxx” in part number.
The Perfect Adapter™
Connects Lee Perfect Powder Measure™ or
RCBS Uniflow™ to your favorite press.*
• A low cost alternative to more expensive
powder measures
• Machined from 6061 Aluminum Alloy
– For LEE Perfect Powder Measure (T1370-P) = $13.95
– For RCBS Uniflow™ (T1370-RCBS) ………. = $15.95
* Requires Lee Powder Through Expanding Die (for pistol) or
Lee Rifle Charging Die available from LEE Precision.
RELOADING COMPONENTS
Captures bullet components for reuse.
• 3 Collets Included – for 22 Hornet to 45-70
• Rimmed or Rimless Cartridges
5.56/.223 Lake City Brass (unprimed) 250ct Bag (T1524) $45.95
Grade A quality, from military surplus auction, true once-fired.
.32 Caliber Revolver Case Gauges ............................... $32.95 Prepared using an exacting reprocess, which includes;
By Wild Bodie Tom
(* Sold individually)
• Precision machined to SAAMI chamber specs.
.32 S&W Long (T1427-S&W) (shown in photo.)
.32 H&R Mag. (T1427-H&R)
.327 Fed. Mag. (T1427-FED)
•
•
•
•
Swage Primer Pocket • Wet Cleaned
FL Resized & Case Gauged
Trimmed to SAAMI Trim Length
Dry Polished to Restore “New Brass” Shine
300 AAC Blackout Brass (unprimed) 250ct Bag (T1523) $69.95
Formed from Grade A quality, Lake City 5.56/.223 brass.
.32 ACP Case Gauge (T1557) ........................................ $29.95 Prepared using an exacting process, which includes;
By UniqueTek
• Stainless Steel for Durability & Stability
•
•
•
•
Decap Spent Primer • Primer Pocket Swaged and Gauged • Wet Cleaned
Reformed & FL Resized to .300 Blackout Specs.
Trimmed to SAAMI Trim-To length • Annealed
Final Inspection to Ensure Primer Seating & Tension
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
REDDING RELOADING EQUIPMENT
REDDING RELOADING DIES (Cont’d)
T-7 Turret Reloading Press (T1404-1) .……………….. $302.95 Carbide Size Button Kit (T1448-xx)* ….…………………. $31.95
The most Flexible Reloading Press There Is!
Heavy Duty Cast Iron Frame for Strength
7 Station Turret – More than any other turret press.
Interchangeable Turret Heads
Spent Primer Collection System
“Smart” Primer Arm
Powerful Compound Linkage with positive Ram Stop
4-3/4” Press Opening and 3-13/16” Ram Travel
— Additional Turret Head (T1404-2) = $74.95
•
•
•
•
•
•
•
Big Boss II Reloading Press (T1405) ……………….... $204.95
Redding’s “Top of the Line” Single-Stage Press!
•
•
•
•
•
•
•
•
•
Heavy Duty Cast Iron Frame for Strength
36° Offset for Easy Access and Visibility.
Offset Straight Pull Handle of Ease of Operation
Powerful Compound Linkage with positive Ram Stop
Spent Primer Collection System
“Smart” Primer Arm
4-1/2” Press Opening
3-13/16” Ram Travel
Accepts 7/8”-14 & 1-1/4”-12 Dies (Adapter Bushing Included)
Slide Bar Automatic Primer Feeding System (T1406) .. $47.95
Eliminates Handling of Primers!
• Fits T-7 Turret & Big Boss II Presses
• Tubes for Large and Small Primers Included
• Holds Approximately 100 Primers
Upgrade your Redding resize die with carbide!
•
•
•
–
*
Fits all Standard and Type S Resize Dies
Fits National Match & Competition Pro Series Dies
Not for Competition Bushing Neck Sizing Dies
Included: Carbide Size Button, Retainer, Spare Decap Pin
Available for: .22 cal. (T1448-22) or .30 cal. (T1448-30)
Competition Bullet Seating Dies (T1282-xxxx)
• Micrometer Adjustable Seating Depth
• Zero Set Feature
• Seating Stem Fits Wide Range of Bullet Profiles
– For straight-walled pistol cartridges
= $85.95 *
– For bottleneck rifle cartridges (Cat. I ) = $109.95 *
* See our web site, or call, for available cartridges & part numbers.
Micro-Adjustable Taper Crimp Dies ……......................... $69.95
• Micrometer Adjustable Taper Crimp
• Adjustment Range: +/– 0.100”
• Reversible Taper Crimp Sleeve
– Available: – 9mm / .38 Super … (T1458-38S/9mm) = $64.95
– .40 S&W / 10mm … (T1458-40S&W) = $64.95
– .45 ACP / .45 GAP .. (T1458-45ACP) = $64.95
– ..223 Remington ….. (T1458-223REM) = $69.95
– ..308 Winchester …. (T1458-308WIN) = $69.95
G-Rx Push Thru Base Resizing Die
Removes the “Glock Bulge” on .40 S&W Brass!
Includes Die, Shellholder/Pushrod & Lock Ring:
– G-Rx Die Set (Steel) – (T1326) = $40.95 (photo at right)
“E-Z Feed” Shell Holder Set (T1408) ............................. $54.95 – G-Rx Die Set (Carbide) – (T1326-C) = $81.95
Contains Six of the Most Popular Shellholders
•
•
•
•
Includes: #1, #6, #10, #12, #18 and #19
Universal Design Fits All Popular Presses
Precision Machined and Heat Treated
Handy Storage Box is Included
Model 2400 Precision Case Trimming Lathe (T1407).. $166.95
The Only Trimmer that Turns the Case Not the Cutter!
Micrometer Trim Length Adjustment.
Universal Collet Holds All Popular Case Sizes
Cast Iron Frame Maintains Precision Alignment
Two Neck Cleaning Brushes – Included
Large & Small Primer Pocket Cleaners – Included
— Power Adapter (Optional) (T1407-PA) = $12.95
•
•
•
•
•
REDDING RELOADING DIES
– Bottle Adapter (optional) – (T1326-adapter) = $11.95
– 32oz HDPE Bottle (optional) – (T1326-bottle) = $6.95
Universal Decapping Die, small (T1418) .....……………. $19.95
Removes primer without resizing case neck or body.
– Handles .22 cal. through .50 cal. Cases
– Case Lengths up to 2.625”
◊ Replacement Rod (T1418-rod) = $10.95
REDDING CASE LUBES & APPLICATORS
Imperial Sizing Die Wax (T1383) ...………..………………. $8.95
A favorite of knowledgeable reloaders for years!
• Non-Sticky / Easy Cleanup
• No Application Pad Needed, Just rub on with Fingers
• For Full-Length Sizing, Shoulder Bump, Reforming, etc
Imperial Bio-Green Case Lube (T1441) ……………....….. $7.95
Competition Pro Series Die Sets (T1417-xxxx) ..…….. $155.95 A plant based, bio-degradable lubricant
Specially Designed for Progressive Reloading Presses!
Includes: – Standard Full Length Resize Die
– Competition Bullet Seat Die
– Taper Crimp Die
Available For: – .38 Super Auto: (T1417-.38 Super)
– .40 S&W: (T1417-.40 S&W)
– .45 ACP: (T1417-.45 ACP)
– 9mm: (T1417-9mm) = $169.95
• Water Soluble for Easy Cleanup
• Will Not Stain Brass
• Use on any Application Pad
Case Lube Pad (T1442) ………….………………………... $13.95
A favorite of knowledgeable reloaders for years!
National Match Die Sets (T1409-xxxx) …….…………… $184.95
• Non-Sticky / Easy Cleanup
• No Application Pad Needed, Just rub on with Fingers
• For Full-Length Sizing, Shoulder Bump, Reforming, etc
Specially Designed for Progressive Reloading Presses!
Imperial Application Media (T1367) ...…………………... $10.95
Includes: – Standard Full Length Resize Die
– Competition Bullet Seat Die
– Taper Crimp Die
• Available For: – .223 Remington: (T1409-.223 Rem.)
– .308 Winchester: (T1409-.308 Win.)
– .30-06 Springfield: (T1409-.30-06)
– .300 Blackout: (T1409-.300 Blackout)
Easy way to apply Imperial Dry Neck Lube!
• Ceramic Spheres Ensure Complete & Uniform Coating
• Graphite Lube will NOT Contaminate Gunpowder
• Comes Pre-Charged with Imperial Dry Neck Lube
Imperial Dry Neck Lube (T1382) ...………………………… $7.95
Use Inside and Outside Case Neck.
Dual Ring Carbide Size Die (T1500-xxxx) …….……….. $109.95 • Graphite Lube will NOT Contaminate Gunpowder.
Sizes case mouth and base separately!
Available For: – .40 S&W: (T1500-40 S&W)
– .45 ACP: (T1500-45 ACP)
– .45 Colt: (T1500-45 Colt)
• Use As Is or to replenish Imperial Application Media
• Perfect for neck sizing.
Deburring Tool (T1443) .....……………………………….., $26.95
Removes Burrs and Bevels Case Mouth.
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
BRASS RECOVERY
SHOOTING RANGE & TARGET ACCESSORIES
™
Brass Wizard Cartridge Case Pickup Tool (T1310-1M) … $54.95 Port-A-Stand™ 'V' Portable Target Stand (T1426-V) …. $49.95
By UniqueTek, Inc.
•
•
•
•
–
Eliminates Bending Over and Handling Dirty Brass
Picks up Center Fire Cartridges & Shot Hulls
Will Not Damage Brass Cases or Shot Hulls
Minimizes pick up of Dirt, Stones and Debris
Includes: “Dumper” Accessory (not shown) and
Telescoping Aluminum Handle.
™
Brass Wizard II Shot Hull Pickup Tool (T1310-2M) …….. $57.95
By UniqueTek, Inc.
Larger Basket is optimized for picking up Shot Hulls.
• Picks up All Gage Shot Hulls without damage.
• Holds up to 40 hulls!
– Includes “Dumper” Accessory (not shown) and
™
Brass Wizard “Rimfire” .22LR Pickup Tool (T1310-3M) $54.95
By UniqueTek, Inc.
Smaller Basket with closer spaced wires is optimized
for picking up .22 rimfire brass.
• Also picks up center fire pistol and small caliber rifle brass.
• Not recommended for shot hulls or large caliber rifle brass.
– Includes “Dumper” Accessory (not shown) and
By UniqueTek, Inc.
Folds to easily fit in trunk or back seat.
•
•
•
•
•
•
•
Sets Up and Takes Down in just Seconds!
18” Width for USPSA/IDPA/NRA D-1 Targets
4.9 lb for Stability & Wind Resistance
Corrosion Resistant Zinc Dichromate Plated
Uses 1”x2” Furring Strips
Target Pockets are Free Draining
3 Tent Stake Holes
Port-A-Stand™ 'H' Portable Target Stand (T1426-H) … $49.95
By UniqueTek, Inc.
Folds to easily fit in trunk or back seat.
•
•
•
•
•
•
•
Sets Up and Takes Down in just Seconds!
18” Width for USPSA/IDPA/NRA D-1 Targets
7.6 lb for Stability & Wind Resistance
Corrosion Resistant Zinc Dichromate Plated
Uses 1”x2” Furring Strips
Target Pockets are Free Draining
4 Tent Stake Holes
Port-A-Stand™ 'Bracket' (T1426-B) ……….………. $29.95 pair
By UniqueTek, Inc.
The ultimate portable target stand!
Telescoping Aluminum Handle (T1310-M) ……………… $9.95* • Light Weight: Just 1.85 lb per pair!
Telescoping handle allows for easy transport of Brass Wizard™ • Super Compact: Fit Multiple Pairs in a Box.
•
•
•
•
1” Diameter Aluminum w Twist Lock mechanism (* if purchased separately)
30.5” Collapsed
49” Extended
Hanging Loop
• Sets Up and Takes Down in just Seconds!
• Uses 1”x2” Furring Strips
• Corrosion Resistant Zinc Dichromate Plated
Port-A-Stand™ Outriggers™ (T1426-OR) ..………… $27.95 pair
™
Moon Wizard Moon Clip Pickup Tool (T1415) …..…… $12.95 Extend 18” target stands to support 24” targets.
By UniqueTek, Inc.
•
•
•
•
•
Collapses to 7”
Pocket Clip
Eliminates Bending Over to pick up Moon Clips
Not Magnetic - Picks Up Stainless Steel & Polymer Moon Clips
Extends to 36”
™
•
•
•
•
Attaches to Most Target Stands
Fits UniqueTek Port-A-Stand™ & Port-A-Stand ‘H’™
Weighs Just 1.5 lb Per Pair
Corrosion Resistant Zinc Dichromate Finish
Sight-Bloc (T1461) …………………….…..…………….… $49.95
• Superior to Sandbags or Metal Rests
Shell Sorter 3-Pan Set (T1356) …………………………... $39.95 • Will not Deteriorate, Freeze or Waterlog
Saves time sorting recovered pistol and rifle brass.
•
•
•
–
–
3-Pan Set - Made from strong ABS Plastic
Sorts brass into 3 categories (.45 cal, .40 cal & 9mm)
Pans are color coded for easy identification
Optional .380 Auto Sorter Plate (T1356-380) = $19.95
Optional .38 Super Auto Sorter Plate (T1356-38SA) = $21.95
•
•
•
•
Never Needs to be Refilled or Replaced
Made from Recycled Rubber
Will Not Scratch Firearm Finish
Rest Heights: 4", 7", 9" (No Stacking Needed)
®
Sure Site Clay Target Hangers
Mr. Shooter’s Brass Marker (T1515-A) …………………. $69.95 Attach to clay pigeons for easy hanging
Quickly Stripe your Brass for
Easy Identification.
•
•
•
•
A Stripe 20 Rounds per Minute
Applies 2 Stripes
Uses 2 Sharpie Permanent Markers
9V Battery Lasts > 5000 Rounds
Manual Brass Marker (T1515-M) ………………………… $14.95
Quickly Stripe your Brass for
Easy Identification.
•
•
•
•
Compact & Light Weight
Fits in Your Range Bag
Applies 1 Stripe
Uses 1 Sharpie Permanent Marker
from 3/8” rope, tree branches, etc.
• Fits Most Clay Pigeon Targets including;
• American Trap & Skeet
• International Targets
• Plus Midi & Mini Targets
• Thin profile (1/16” thick) makes them
less likely to be struck by a bullet.
— 10 Count bag: (T1317-10) Black / (T1317-10Y) Yellow ………………. $5.95
— 100 Count bag (T1317-100) Black / (T1317-100Y) Yellow …………. $45.95
— 1500 Count box (T1317-1500) Black / (T1317-1500Y) Yellow ……. $600.00
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
GUN STORAGE ACCESSORIES
GUN STORAGE ACCESSORIES (cont’d.)
™
Multi-Mag by Gun Storage Solutions (T1533) ……............... $24.95 HygroSet Digital Hygrometer (T1324) ......................... $24.95
Magnetically holds guns or magazines on any
surface. Strong enough for guns with full mags!
Monitors humidity in a gun safe, at a reloading bench, or in a storage
area for powder, primers and loaded ammo.
• Soft Plastic Coated Magnets Will Not Scratch
• Holds Guns on Horizontal or Vertical Surfaces.
• Includes 2, 2-Section Magnetic Strips
•
•
•
•
Modular 6 Gun Pistol Rack by HySkore (T1534-6) ……. $24.95
•
•
•
•
•
Soft EVA Foam Will Not Scratch Gun Finishes
Guns are Separated and Protected
Will Not Absorb Moisture or React to Gun Oils
Can be Reconfigured to the Width of Each Gun
Multiple Racks can be Linked Together
Soft EVA Foam Will Not Scratch Gun Finishes
Guns are Separated and Protected
Will Not Absorb Moisture or React to Gun Oils
Can be Reconfigured to the Width of Each Gun
Multiple Racks can be Linked Together
3-gun Rack has Wider Slots for Guns with Big Grips!
Rifle Rods by Gun Storage Solutions
Handgun Hangers by Gun Storage Solutions (T1328-4) ..... $19.95
Hangs handguns under the shelf, freeing up
more shelf space in your gun safe.
(4-pack)
Handgun
Hangers
Mag Mount by Gun Storage Solutions (T1468) …………….... $9.95
Magnetically holds magazines anywhere you have
extra space in your gun safe … on the door, wall
or under a shelf.
• Large 3” x 10” Magnetic Surface
• Holds Most Metal Magazines
• Installs on ANY Surface, Not Just Metal
™
Gat Rack Handgun Rack (T1266) …….………..………. $12.95
The most adaptable & economical gun rack. Adjusts to fit
virtually any handgun, with or without a scope.
Holds up to 4 Handguns
Holds Scoped Handguns Upright
Won’t Attract or Absorb Oil or Moisture
Adjusts from 0” to 8.5” to Fit Any Barrel Length
MAGnet Gun Caddy™ (T1467) ....................................... $10.95
Secures your gun when you need to temporarily set
it down. Holds just about any long barrel gun upright
against your vehicle, gun safe, or any metal surface.
•
•
•
•
•
.410 Bore through 10 Gauge Shotguns
Double or Over/Under Barrels
Also Fits Most Rifles & Fishing Poles
Soft High-Energy Magnet Won’t Scratch Finishes
Soft Foam Will Not Scratch Barrel
Absorbs 4-6 ounces of water
Services up to 333 cubic ft. area
Plug into any wall outlet to recondition
Lasts 10 Years
Absorbs moisture from gun cases or gun safes.
Perfect for travel.
– 10-Rod Kit (T1327-10) = $39.95
– 20-Rod Kit (T1327-20) = $74.95
– 40-Rod Kit (T1327-40) = $139.95
– Extra Rifle Rods (6-pk) (T1327-6) = $17.95
– .17cal. Rods (2-pk) (T1327-17)= $9.95
•
•
•
•
•
•
•
•
Gun Storage Desiccant By UniqueTek (T1529) ............... $11.95
Rifle
Rods
Expand the capacity of your gun safe and reduce
the risk of damage to your guns.
• Fits Shelves 5/8” to 1” Thick
• Fits Hanguns .22 cal. & Larger
• Powder Coat Finish Won’t Rust or Scrach Bore
™
Eva-Dry Renewable Mini-Dehumidifier (T1330) .......... $19.95
Absorbs moisture from gun safes, storage
cabinets, or any small enclosed area.
Modular 3 Gun Pistol Rack by HySkore (T1534-3) ……... $18.95
•
•
•
•
•
•
RH Accuracy: ±2% / Range: 20% to 90% RH
Temp. Accuracy: ±1° (F or C) / Range: -4 to 122°F
LCD Display: 0.5” Tall Digits
Size: 2.4” W x 1.9” H x 0.6” Thick
• 6.5"x5"x0.75" Bags / 9oz Desiccant per Bag
• Adsorbs 20% its Weight in Moisture
• Regenerable/Disposable
• Tyvek Bags are Tear Proof & Dust Free
– 3 Individual Desiccant Bags per Pack
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
COWBOY ACTION SHOOTING PRODUCTS
Cowboy Screwdrivers™
By Lefty Dude
• Made from real Cartridge Cases with Hardened Steel Bits
• 45-70 Govt. model has Magnetic Tip & Replaceable Bit
– For .32/.38 Loops ............... (T1285-32/38) = $7.95
– For .44/.45 Loops ................ (T1285-44/45) = $7.95
– .45-70 Government .... (T1285-45-70 Govt.) = $17.95
Marlin Spring Kit (T1337) …………………………………. $21.95
By Palo Verde Gunworks
Reduces spring tension of Marlin rifle action. Gives a
lighter, smoother action & slightly lighter trigger pull.
COWBOY ACTION SHOOTING PRODUCTS (cont’d)
Dry-Fire Practice Snap Caps
The best for meaningful dry fire practice.
•
•
•
•
–
–
–
Available in .38 Special, 45 Colt and 12 GA
.38 & .45 — Brass Case with Lead Bullet
12 GA — Real Shothull / Simulates Empty Hull
Rubber “Primer” Protects Firing Mechanism
Complete Rim – Will Eject From Rifle …….. (T1451) $7.95/2-pk
Machined Rim – Will NOT Eject From Rifle.. (T1452) $17.95/2-pk
12 GA Shotshell – Simulates Empty Hull …. (T1456) $18.95/4-pk
“Cowboy Shooting with the Champions” ………...…… $24.95
By Chuckwalla Kid
(T1425)
A 1 Hr & 12 Min instructional DVD!
Features 5 Cowboy Action Champions including:
Chuckwalla Kid, Echo Meadows, Teddy Bear,
Rossi ‘92 Spring Kit (T1434) ……………………………… $29.95 Blue Ridge Ranger and Palo Verde.
12 GA Shotgun Chamber Brush (T1286) .……………… $14.95
Reduces spring tension of Rossi rifle action. Gives a
• Effectively Cleans Crud from Shotgun Chamber & Forcing Cone
lighter, smoother action & slightly lighter trigger pull.
• Use Dry or With your favorite Gun Cleaning Solvent
• Fits Marlin Lever Action Rifles
• Models: 1984, 1985, 336, 444 and 39A.
• Adjustable to 7 Levels of Spring Tension
• Fits Rossi ‘92s in .38/.357, .44-40, .44 Mag. & .45 Colt
• Includes 2 Ejector Springs for Fine Tuning.
Stoeger Top Lever Spring Kit (T1552) ……………….… $17.95
Gives a lighter and smoother feeling top lever action
and makes your shotgun easier and quicker to open.
• Fits Stoeger Coach and Uplander Side-by-Side Shotguns
66/73 Rifle Magazine Tube End Cap Wrench (T1380) ... $19.95
By Saber River Gunsmithing
• 2 Blades
• 303 Stainless Steel
Custom Leather Lever Wrap (T1563-x) ) – NEW! .…… $39.95
Winchester Model ‘97 6-Round Conversion ................ $37.95 By Palo Verde Gunworks
By Wild Bodie Tom
Allows for a full 6 rounds in a Model ‘97 mag tube.
– Kit contains: 1 Magazine Spring and 1 Follower
– Solid Frame (T1413-S)
– Take-Down Frame (T1413-T)
Winchester Model 12 Weight Kit (T1528) ..................... $64.95
By Wild Bodie Tom
Provides smoother feeding PLUS adds weight at the
muzzle end of the magazine tube for reduced muzzle
rise and faster follow-up shots.
– Kit contains: – Weight (3.6oz)
– Magazine Spring
– Spring Follower
Cushions your fingers making cocking the
lever easier, smoother and less painful.
Special Four-Piece Leather Construction
Wide and Flat to Match and Cushion Fingers
Does not Slide, Twist or Turn.
Kit Includes: Leather Lever Wrap, Lacing,
2 Lacing Needles and Instructions on DVD.
Available for the Following Lever-Action Rifles:
•
•
•
•
–
–
–
–
–
1873 and 1866 Winchester & Uberti, 1860 Henry: (T1563-1)
1894, 444 and 336 Marlin: T1563-2)
1892 Winchester, Rossi, EMF, Braztech, Uberti, Puma & Chiapa 92: (T1563-3)
94 Winchester and reproductions: (T1563-4)
Henry Big Boy and Henry .30-30 & .45-70: (T1563-5) – NEW!
Front Sight Polish Kit (T1559) ……………………..……. $9.95
.32 Caliber Case Gauges ............................................... $32.95 By Palo Verde Gunworks
By Wild Bodie Tom
(* Sold individually)
• Precision machined to SAAMI chamber specs.
.32 S&W Long (T1427-S&W) (shown in photo.)
.32 H&R Mag. (T1427-H&R)
.327 Fed. Mag. (T1427-FED)
Shotshell Case Gauge (T1431-X) ................................... $29.95
By Boggus Deal
•
•
•
•
–
Gauges Full Length of Shotshell
2-3/4” and 3” Shotshells.
Precision Machined to SAAMI Chamber Specs.
Anodized Aluminum for Durability
Available in: 12 GA … (T1431-12) [Red]
20 GA ... (T1431-20) [Blue]
The Shines your front sight to make it quick for
the eye to see and more visible in dim light.
• Works on Bare Metal Front Sights Including:
Brass, Silver and all Polished or White Sights.
• Kit lasts for Many Years
• Kit Includes: 1 Leather Faced Polishing Stick (Double Sided)
0.3oz Polishing Compound
Zip Seal Vinyl Storage Bag and Instructions
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
RUGER® 10/22® ACCESSORIES
PARDINI ACCESSORIES
10/22 Extended Mag Release – By Ranch Products
Target Compensator – for Pardini Pistols (T1514-xx) ……. $79.95
Makes changing magazines easier and faster!
An effective Recoil Compensator for Pardini pistols.
• Drop-in Fit requires No Gunsmithing.
• Investment Casting yields Strength and Accurate Dimensions.
– Available in: Black Steel ……… (T1402-B) = $12.95
Stainless Steel …. (T1402-S) = $15.95
• 6061 T6 Aluminum adds Only 0.5oz to Muzzle.
• 6061 T6 Aluminum w Black Cerakote Finish *
• Works with Original Internal Weights & adds Only 0.5oz
– .22 cal. - SP/SP Rapid Fire & SP1/SP1 Rapid Fire (T1514-1)
– .32 cal. - HP/HPE (Electronic Trigger) .32 cal, (T1514-2)
RUGER® MK-II/MK-III ACCESSORIES
* Target Compensator shown in bare aluminum for photographic clarity.
Mk-II Extended Mag Release - By Ranch Products (T1401)..$9.95 .32 ACP Case Gauge (T1557) ........................................ $29.95
Easier and faster magazine changes, even with
oversized target grips on Mk-I & Mk-II pistols.
• Drop-in Fit requires No Gunsmithing.
• Investment Casting yields Strength & Accurate Dimensions.
– Available in: Black Steel ……. (T1401-B) = $9.95
Stainless Steel ... (T1401-S) = $12.95
By UniqueTek
• Stainless Steel for Durability & Stability
Pardini Thumb Saver™ – Mag Loader (T1299-02) ………. $19.95
Speed Strip Kit - By Majestic Arms (T1464) ………………...$49.95 By UniqueTek
Makes field stripping quick & easy, unscrew the new Bolt Stop Pin
using the Allen key (supplied) and remove it from the top of the pistol.
Then just slide out the bolt. It’s that simple!
•
•
–
–
Unique 2-Piece Bolt Stop Pin.
Hammer Reduces Trigger Pull to 3-1/2 to 3-3/4 Lb.
For Mk I, Mk II and Mk II 22/45™ … (T1464-1)
For Mk III and Mk III 22/45™ ……... (T1464-2)
•
•
•
•
•
SIGHTS, OPTICS & ACCESSORIES
Quick Strike Firing Pin - By Majestic Arms (T1465) ……... $16.95
®
For all Ruger Mk I, Mk II, Mk III and 22/45™ pistols.
•
•
•
•
Drop-in Replacement / No Gunsmithing
CNC Wire EDM Machined to Exact Tolerances
Heat Treated Strike Face for Long Life
10% Lighter for Faster Lock Times
RUGER® Mini-14® ACCESSORIES
Protects Your Thumb
Allows Quick & Easy Loading
Light Weight: Only 6 g (0.22oz)
Ambidextrous
Fits Pardin .22 LR Magazines
– SP and SP RF
– SP1 and SP1 RF
Advantage Tactical Sight (T1264-x)*
• Quick Target Acquisition
• Greater Target Visibility
• 5 Sight Colors (Included)
– Glock: $97.95
– 1911s & M&P: $97.95
– Springfield XD / Sig 220/226/228/229/239/245: $97.95
* See our web site, or call, for details and part numbers for each model sight.
™
StripLULA For Mini-14® (T1305) …………………………. $27.95 EyeShield – By Field Optics Research (T1430-x)
Load .223 caliber (5.56mm) ammo on stripper clips into original
Ruger mags with unmatched speed – 30 rounds in 12 sec.
•
•
•
•
®
®
Fits original Ruger Mini-14 Metal Mags
Durable Glass-reinforced Polymer
Eliminates Finger Pain or Injury
Also Loads Loose Rounds
.223 Stripper Clips – By THERMOLD
Prevents Lens Glare, Enhancing Optical Performance.
• Attaches to Eyepiece of Binoculars or Spotting Scopes
• Blocks All Ambient Light from Entering Eyepiece
• Also Blocks Wind, Rain, Snow and Dust.
Item#: T1430-2 (1 Pair, Standard Size) [shown in photo]…………..……….. $14.95
Item#: T1430-1 (5-pc Set: 1 Pair Std, 1 Pair Small, 1 Std for Scope) .….. $19.95
BinoSlicker Bandit (T1586) ………………….…..……….. $15.95
For .223/5.56mm NATO rifle cartridges.
By Alpine Innovations
• Made from Zytel Nylon
• Last Longer – No Brass Tab to Break Off!
• Each Clip Holds 10rds
— 10 clips per pack ………. (T1313-10) = $3.95
— 100 clips per pack …….. (T1313-100) = $34.95
— 1000 clips per pack …. (T1313-1000) = $289.95
•
•
•
•
•
®
NEW!
Fits Over Binocular Eye Cups
Blocks Wind, Weather and Glare
Improves Visual Acuity & Reduces Eye Strain
Works with Eyeglasses
Folds Easily For Storage
ScopeSlicker Bandit (T1587) ………………….…..……… $10.95
•
•
•
•
•
NEW!
Fits Over Spotting Scope Eye Cups
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
AR-15 ACCESSORIES
AR-15 TOOLS & PARTS
™
STINGER Monopod – by Whidden Gunworks (T1301-M1) $124.95 AR-15 Bolt Catch Pin Punch (T1368) ……………….….. $14.95
A rear monopod for AR Rifles.
Provides the same stability for the rear of the rifle that
the bipod has made standard for the front!
• Retracts Inside Stock so is always Instantly Available
• Easy, One-Handed Deployment
• Solid Steel Leg won’t Bend Under Recoil.
• Micro-Adjustable Foot with Knurled Rim for Easy Grip
– Available For: McMillan A-3 & Adj. A3-5 Stocks
Specially designed for removing AR-15 bolt catch pin.
• Flat Side Clears Mag. Well
• Point Engages Center of Roll Pin
AR-15 Armorer’s Wrench - By GunTec USA (T1394) …… $39.95
The Preferred Armorer’s Wrench!
• Forged Heat Treated Steel
• Parkerized Finish
™
™
StripLULA (T1293) ……………………….……………….. $27.95 AR-15 PUSHTOOL by Sporting Conversions, Inc.
Load .223 caliber (5.56mm) ammo on stripper clips into AR-15 &
M-16 magazines with unmatched speed – 30 rounds in 30 sec.
• Fits all AR-15/M-16 Metal and Plastic Mags
• Durable Glass-reinforced Polymer
• Eliminates Finger Pain or Injury
• Also Loads Loose Rounds
— Also available for Mini-14 magazines! (T1305) .. $27.95
The best tool available for removing AR push pins.
Bench Model ……. (T1289-BM) = $7.49
Key Ring Model … (T1289-KR) = $7.95
™
MAGCATCH TOOL by Sporting Conversions, Inc. (T1290).. $7.95
A tool designed specially to aid in removal and
installation of the AR-15 magazine catch.
THERMOLD .223 Stripper Clips
RANGE MAG-LOK™ KIT by Sporting Conversions, Inc. (T1291) …$14.95
Clips for .223/5.56mm NATO rifle cartridges. Made
from Zytel® nylon, so they last longer than metal
stripper clips – no brass retainer tab to break off!
AR Emergency Repair Kit - By Specialized Dynamics (T1423) .. $19.95
— 10 clips per pack ……... (T1313-10) = $3.95
— 100 clips per pack ……. (T1313-100) = $34.95
— 1000 clips per pack …. (T1313-1000) = $289.95
™
LULA Magazine Loader/Unloader (T1294)...….…..….. $26.95
A military-quality magazine Loader/UnLoader Accessory.
Facilitates both loading and unloading magazine.
• Fast, Safe, Comfortable and Painless
• Eliminates Wear on Magazine Lips
• Fits All Sizes and Types of Mags, including Plastic Mags.
™
LULA Magazine Loader/Unloader (T1535) .................... $26.95
For 7.62/.308 Magazines
A military-quality magazine Loader/UnLoader Accessory.
Facilitates both loading and unloading magazine.
•
•
•
•
Fast, Safe, Comfortable and Painless
Eliminates Wear on Magazine Lips
Fits mot SR25 Type 7.62/.308 Metal & Plastic Mags.
Fits DPMS and PMAG Magazines
™
Original Bob Sled - Single Shot Loading Accessory .…. $39.95
Allows loading of single rounds during competition,
at the benchrest, or out varmint shooting.
– 10rd “Match Rifle” (T1354-MR) = $39.95
– 20rd “Service Rifle” (T1354-SR) = $39.95
– 10rd 6mm-15 (T1354-6mm) = $39.95
– SR/LR 308 (T1354-SR/LR) = $54.95
– SR/LR 308 “Service Rifle” (T1354-DPMS) = $59.95
AR-15 Bolt Release Lever (T1355) ……………… $24.95
Release Bolt Catch without reaching over receiver.
• Great for Match Rifle, Space Guns and Varmint Shooting
• Great for Side Cocking Uppers!
• Perfect companion for use with the Original Bob Sled.
NEW! OPFOR™ Magazine Carrier (T1540-X)
By Limitless Gear
• Fast Magazine Insertion & Removal
• Positive Magazine Retention (PMR)
• Attaches to MOLLE/PALs Surfaces
• High Strength Polymer in Coyote Brown
• Stackable
– Individually (T1540-1) … $34.95
– 3-Pack (T1540-3) …….. $94.47
– 6-Pack (T1540-6) …… $185.70
Converts AR-15 magazine release to a
“fixed magazine” requiring a tool to release.
The 6 most frequently lost or broken AR parts!
– Enhanced Extractor Spring
– Take Down Detent and Spring
– Firing Pin Retaining Pin
– Buffer Retaining Pin and Spring
– Hammer/Trigger Pin
– Set of 3 Gas Rings for Gas Impingement Rifles
M4 Extractor Upgrade Kit - By Buffer Technologies (T1462) ….. $12.95
Eliminates extractor problems with M4 style rifles.
– Includes Extractor Spring, Extractor Spring Insert
and O-ring.
GBA Gas Block Aligner - By HB Industries (T1511-xx) ………... $9.95
Ensures perfect alignment between gas port hole in
AR barrel and gas block! Fast and Easy to Use!
• Works with any 3/4" ID Gas Block
• 6 Pin Diameters Fit Various Gas Port Diameters
• Works with Low Profile, Adjustable, Railed or
Flip-up Sight Blocs.
– .22 Caliber (T1511-22)
– .30 Caliber (T1511-30)
AR15 Scraper - By Real Avid (T1502) ………………………... $19.95
Specially designed to quickly clean
the entire Bolt Carrier Group
– Cleans 12 BCG Surfaces
– Removes Heavy Fouling Faster a Brush
– Non-Hardened Stainless Steel Prevents Marring
– Compact, Light Weight, Easy to Carry
MORE AR-15 PRODUCTS ON NEXT PAGE
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
AR-15 GRIPS & RECOIL CONTROL
SNAP CAPS, CHAMBER FLAGS & TOOLS
Never Quit Mag Well Grip (T1373) ................................. $19.95 A-Zoom® Snap Caps (T1473-xx) ………………. $8.95 to $19.95*
An advanced polymer one-piece grip
molded to fit the AR15/M16/M4 mag well.
Also fits Barrett 468 and H&K 416
• Provides Ergonomic Grip on Mag Well
• Textured and Contoured to Fit Hand
– Available Colors: Desert Tan, OD Green & Flat Dark Earth.
Limbsaver Pro Handgun System (T1314-14)* .................. $9.95
A Recoil Energy Absorbing Cushioned Grip.
• Improves Grip Even When Hands are Sweaty
• Reduces Hand Shock by Absorbing Recoil Energy
• Stretches to Fit AR Grip with NO Gunsmithing
— Colors: Black (T1314-14) or Desert Tan (T1314-16)
KynSHOT™ Hydraulic Recoil Damper
A hydraulic rate/recoil-reducing damper for AR Rifles.
• Reduced Felt Recoil & Muzzle Rise
• Suppresses Bolt Bounce
• Controls Fire Rate
• Improves Accuracy
• Protects Optics from Shock.
– AR-15 Carbine …………………... (T1503-1)
– AR-15 Full-Length Stock ……….. (T1503-2)
– AR-10 “Shortie” ………………..... (T1504-1)
– AR-10 Carbine …………………... (T1504-2)
– AR-10 Full-Length Stock ……….. (T1504-3)
= $109.95
= $115.95
= $119.95
= $119.95
= $115.95
Solid aluminum with a highly durable polymer
“Dead Cap” that withstands over 3000 dry fires.
•
•
•
•
•
Solid Aluminum
CNC Machined to Precise SAAMI Dimensions
Anodized for Smooth Functioning & Long Life
Anodized Aluminum Side Plates
Laser Engraved Headstamp
* See web site for available calibers, part numbers and prices.
®
Chamber-View Empty Chamber Indicators
Provides clearly visible indication of an Open Action
and an Empty Chamber.
• Provides Instant Recognition that Firearm is Safe
• Prevents Accidental Closings of Action
• Prevents Elements from Contaminating Action
• Durable Silicone Rubber / Highly Visibility Blaze Orange
• Won’t Mar Firearm Finish / Inert to Cleaning Chemicals
• Each Model has a Unique Universal-Fit Design
— Shotguns - 12GA to ,410 bore … (T1512-1) = $9.95
— AR15 Rifles - .223 cal. .……….... (T1512-2) = $9.95
— AR10 Rifles - .308 cal. .. NEW! .. (T1512-5) = $9.95
— Pistols - 9mm and .40 cal. ……... (T1512-3) = $7.95
— Pistols - .22 Rimfire…………………… (T1512-4) = $8.95
Rifle or Shotgun Safety Flags (T1447-XX) (Sold Separately)
– By Ergo Grips
Now required by USPSA at all 3-Gun events!
ACCU-Wedge – By Buffer Technologies (T1322) ………….... $4.95 • Durable Nylon in High-Visibility Yellow
• Eliminates Play between AR Upper and Lower.
• Prevents Play from Developing in ARs with No Play.
• Simple Drop In Installation
• Rifle Flag Fits .223 cal. (5.56mm) Chambers
• Shotgun Flag Fits 12 Gage Chambers
— Rifle Flags (T1447-AR) = $5.95 (3-pack)
— 12 GA Shotgun Flag (T1447-SG) = $3.95 (ea)
Adjustable Tactical Grip™ (T1530) ..………… $24.95 to $29.95
– By XTECH Tactical
Now Available for FN SCAR! Handi-Racker (T1539-x) ………………………………….. $24.95
Adjust grip angle to relieve stress on shooters
wrist. Accommodates wide range of shooters
and shooting styles.
• Adjustable Angle: 17° 25° or 33°
• Subtle Finger Grooves
• Slight Palm Swell
• Extended Rear Surface
• Well Placed Textures
• ETG™ Grip Tape Now Included with all Grips!
• Colors: Black & Flat Dark Earth
– AR-15 Black …….. (T1530-1) = $24.95
– AR-15 FDE ……… (T1530-2) = $24.95
– FN SCAR Black … (T1530-3) = $29.95
– FN SCAR FDE …. (T1530-4) = $29.95
Pistol Racking Assistive Device!
• Easily & Safely Clear Jams
• Helps in Disassembly & Assembly
• Hard Plastic will Not Scratch Slide Finish
• Light Weight & Easy to Carry
— Available in 4 Sizes to Fit Most Popular Pistols
FINI™ Universal Choke Tube Wrench (T1501) ………...… $9.95
Makes it a snap to quickly & easily change
a choke tube in the field or on the bench.
•
•
•
•
•
Fits .410, 28, 20, 16, 12 & 10 GA
Heat-Resistant Stainless Steel Blade
Anodized Aluminum Side Plates
Folds for Compact Carry
Weighs Less Than 2 oz
Ultimate Bench Block - By Saber River Gunsmithing (T1381) $59.95
•
•
•
•
•
•
Heavy Gauge Aluminum Channel Base
Filled with a Tough But Soft Polyurethane
Will Not Mar Gun Finishes
1.6 lbs Stays Put on Bench!
Can be Easily Clamped in a Vise if Needed
Can be Flipped Over if a Hard Surface is Needed
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
GLOCK ACCESSORIES
FIREARM PERFORMANCE ENHANCEMENTS (cont’d)
Rigid Recoil Rod – by Scherer Supplies (T1315-x) …………. $9.95 Aluminum Inlaid Tape Grips- by Techwell USA (T1541-1) $78.95
Eliminates Recoil Tube Flex and prevents recoil spring from binding.
Part of the Ultimate Magwell/Grip System for 1911s.
• Recessed Surface with Die Cut Grip Tape Inlay
– Rod #1: For Models 20 & 21 – (T1315-1)
– Rod #2: For Models 17, 17L, 22, 24, 24C, 32, 34 & 35. – (T1315-2)
• Installs in under 60 seconds
– Rod #3: For Models 19, 23 & 32. – (T1315-3)
(Will not fit Gen4 Glocks) • No Gunsmithing & No Modifications Required
NOTE: Manufacturer has gone out of business. Limited inventory on hand. Some sized are out of stock.
• 100% Interchangeability with all Techwell Magwells
– Black Only (T1541-1)
Extended Take Down – by Ranch Products
Makes disassembly of Glock firearms easier.
• Fits all GLOCK Models.
– Available in: Black (T1400-B) = $9.95
Nickel (T1400-N) = $12.95
MagWell – by Buffer Technologies (T1325-x) ………………. $29.95
Provides faster reloads and a more secure grip.
•
•
–
–
No Gunsmithing & No Modifications Required
For Gen3: 17, 17L, 22, 24, 31, 34, 35 & 37 - (T1325-1)
For Gen4: 17, 17L, 22, 24, 31, 34, 35 & 37 - (T1325-2)
Techwell Magwells – by Techwell USA (T1542-x) ……..…. $84.95
•
•
•
–
–
–
Installs in under 60 seconds
100% Interchangeability with all Techwell Grips
Techwell TGO (T1542-1)
Techwell XT (T1542-2) [shown in photo]
Techwell SP (T1542-3)
PISTOL MAGAZINE LOADER ACCESSORIES
Finger Rest Extension – by GAP Enterprises (T1302-xx) .. $19.95 UpLULA™ Magazine Loader/Unloader (T1292) ….……. $34.95
Improves control without sacrificing concealment.
• Simply replaces existing magazine base plate.
• Available for Compact and Subcompact Glocks
• 2 Finger Rest Extensions per package.)
– Fits GLOCK Models 19, 23, 32, & 38 (T1302-01).
– Fits GLOCK Models 26, 27, 33, & 39 (T1302-02)
Note: Fits Late Gen3 (longer) and All Gen4 magazines.
FIREARM PERFORMANCE ENHANCEMENTS
Limbsaver Pro Handgun System (T1314-xx)* .................. $9.95
A Recoil Energy Absorbing Grip.
•
•
•
–
Improves Grip Even When Hands are Sweaty
Reduces Hand Shock by Absorbin g Recoil Energy
Stretches to Fit Grip with NO Gunsmithing
Available in 4 sizes to fit most semi-auto pistols.*
•
•
•
•
Loads .45, .40, 10mm, .357 and 9mm mags.
Works with both Double and Single-Stack mags,
No Inserts, Spacers or Adjustments Needed
Fast, Safe, Comfortable and Painless.
Baby UpLULA™ Mag. Loader/Unloader (T1358) ……... $34.95
•
•
•
•
•
Loads mags for .380 Auto & calibers down to .22 Rimfire
Works with Single-Stack mags, only.*
No Inserts, Spacers or Adjustments Needed
Fast, Safe, Comfortable and Painless
Will not load Ruger Mk-I, II, III or S&W 22A mags.
Thumb Saver™ – .22 LR Mag Loader (T1299-01) ………….. $7.95
Ruger MK I, MK II, MK III & 22/45
Browning Buckmark & Challenger III
Colt Woodsman & Huntsman
AMT Lightning • S&W 22A & 22S
Beretta U22 Neos
G10 DualTec Grips - by Techwell USA (T1541-2x) …………$74.95
•
•
•
•
•
Moon Clip Extractor Tool – by Ranch Products (T1403) ...... $3.95
* See our web site for list of sizes and firearms they fit.
•
•
•
•
–
–
–
–
DualTec – Unique Dual Pattern Texture
100% Interchangeability with all Techwell Magwells
Black (T1541-2B) [shown in photo]
Gray/Black (T1541-2GB)
OD/Black (T1541-2OB)
Red/Black (T1541-2RB)
• Works with All Calibers and All Moon Clips
• Can Demoon a single 1 round
• Demoons 1/2 moon, 1/3 moon and full
moon clips that hold and odd number of rounds.
Golf Club Demooner Tool - by Ultimate Accessories ……. $10.95
Hand made from recycled golf club shafts by Dan Furbee.
G10 SureTec Grips - by Techwell USA (T1541-3x) …………$74.95
•
•
•
•
–
–
–
–
SureTec – Unique Diamond Pattern Texture
100% Interchangeability with all Techwell Magwells
Black (T1541-3B) ) [shown in photo]
Gray/Black (T1541-3GB)
OD/Black (T1541-3OB)
Red/Black (T1541-3RB)
•
•
•
–
Easy and Fast to Use
Demoons 1 Round at a Time.
Captures and Stores Demooned Rounds Inside Handle.
Available for: .45/.40/10mm … (T1420-.45)
.38/9mm ………. (T1420-.38)
Moon Clips – by Ranch Products (T1419-xx) †
• Durable Spring Steel with Black Finish
• Available for Many Popular Revolvers
• Calibers: 9mm, .38 Cal., 40 cal. and .45 cal.
† See our web site, or call, for available types, part numbers & prices.
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
FIREARMS CLEANERS LUBES & TOOLS
FIREARMS CLEANERS LUBES & TOOLS (cont’d)
UniqueTek Premium Firearms Cleaner™ (T1254-x)
Squib Rod/Multi-Tool - By Arredondo Accessories (T1287) ... $10.95
A Deep Cleans metal then evaporates completely
•
•
•
•
• Virtually Odorless – Safe to Use Indoors
• Contains No Oils or other Additives
• Will NOT Swell Rubber
• Ammonia Free
4oz (T1254-4) = $6.95
1qt (T1254-1Q) = $21.95
8oz (T1254-8) = $9.95
1gal (T1254-1G) = $49.95
®
Dri-Slide Improved Weapons Lubricant (T1247)
Multi-Function Gun Cleaning Brush (T1286) …………………. $14.95
$11.95
A Super Fine Grade Moly with rust & corrosion inhibitors
in a fast evaporating carrier solvent!
(4 oz bottle)
•
•
•
•
Squib Rod
Scope Battery Cap Remover
Magazine Base Pad Remover
Windage Screw Adjuster
Dry Film will Not Attract Dust, Sand or Grit
Temperature Range: –20°F to +1000°F
Needle Applicator gets into Hard to Reach Spots.
Effective as a Bore Treatment
Brian Enos’s SLIDE-GLIDE (T1247-x) … (1/2oz tube) ……. $7.95
•
•
•
•
Double-Stack Pistol Mags
AR Rifle Mags
AR Upper Receiver
12GA Shotgun Chambers
AR-15 Bore Guide - (T1459) …………………………………………. $24.95
•
•
•
•
Machined from Solid Delrin
Engages Barrel Adapter
No O-Ring
NEW Side Solvent Port
A uniquely formulated lubricant that protects all firearms from corrosion Bore-tips™ - By Swab-its® (T1507-xxx) ...................... $4.95 to $9.95
and wear. Contains the highest- grade extreme pressure compounds. Tough, reusable foam tips engineered for a
• Super Stringy so it Stays Put!
tight bore fit that provides tight, 360 degree
• Softens Felt Recoil in Autos
contact with the bore.
— Slide-Glide, Standard (T1247-S)
— Slide-Glide, Lite (T1247-L)
J-B Non-Embedding Bore Cleaning Compound (T1369)...$10.95
The original, time-proven formula developed by Jim Brobst.
•
•
•
•
Cuts Toughest Bullet Jacket & Powder Fouling
Removes Moly Fouling
Can't-Run Paste Formulation
Cushioned Abrasive Action Leaves Bores Sparkling (2oz jar)
FrogLube™
Cleans, Lubricates and Protects your Knives and Guns.
Dissolves Carbon, Grease and Rust.
Bio-Based and Non-Toxic
– Paste: 4oz jar (T1421-Paste) = $10.95
– Liquid: 4oz bottle (T1421-Liquid) = $17.95
– 2-Pack: 4oz Paste, 4oz Liquid and Microfiber Cloth (T1421-Kit) = $34.95
– NEW! Extreme: 1.5 fl oz Tube (T1421-EXT) = $13.95
®
Drymate Gun Cleaning Pads
Protect your gun and your bench!
— Pistol (16”x20”)…(T1283-pistol) = $7.95
— Rifle (16”x54”)…(T1283-rifle) = $12.95
• Washable & Reusable Multiple Times
• Fiber and Lint Free
• Threads Onto Standard Cleaning Rods
• Use with Most Cleaning Solvents & Oils
– .22 cal to .30 cal: 6 Bore-tips per package = $4.95
– .40 cal & .45 cal: 5 Bore-tips per package = $5.95
– 12 GA, 20 GA and 28 GA/.50 cal: 3 Bore-tips per package = $9.95
– NEW Multi-pack - .22, .30, .38, .40 & .45 Calibers in 1 Pack = $15.95
Note: .40 caliber Bore-tips™ also work on .410 bore shotguns!
Gun-tips™ - By Swab-its® (T1508-xxx) ....................... $4.95 to $9.95
Tough, reusable foam tips engineered for
Cleaning firearms. Great for cleaning Pins
Trigger Assemblies, Levers, Slide Rails,
Springs, Extractors and Tight Spaces.
• Washable & Reusable Multiple Times
• Do Not Leave Lint or Fuzz like Cotton Swabs
• Nonabrasive
• Use with Most Cleaning Solvents & Oils
• Available in a Variety of Sizes
– Multi-Pack: 9 Piece Set * (T1508-1) = $4.95
* Multi-Pack shown in photo.
– 3/16" dia x 3/4" tip with 6" Handle: 24 per package (T1508-2) = $9.95
Ranch Bore Reflector (T1579) ………………….…..……… $9.95
Microfiber Gun Cleaning Cloths (T1377) ....................... $12.95 By Ranch Products
Special weave won't snag like terry cloth.
Directs ambient light inside of bore
• Lint Free / Non-Abrasive
• Highly Absorbent
• Reusable and Washable 300 to 500 Times
— (3pk of 16”x16” cloths with hemmed edges)
Heated Ultrasonic Gun Cleaner
Full-power, industrial-grade ultrasonic cleaners engineered and
®
manufactured in the USA by SHARPERTEK .
•
•
•
•
•
Ultrasonic Power: 180 Watts
3 Ultrasonic Transducers
Dual Heating Elements
Built-in Digital Timer
“Sweep Mode”
– 6-Liter, 6.0” deep tank (T1357-6)= $477.95*
* Plus $25.00 Flat Rate Shipping (to lower 48 states)
making bore inspection easier.
•
•
•
•
No Batteries Needed
Simple to Use / Easy to Carry
Fluorescent Fiber Optic Material
4 Colors Included: Clear, Green, Orange, Red
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
LEAD DECONTAMINATION
®
TRAINING AIDS & SAFETY EQUIPMENT
™
D-Lead Hand Soaps
Shooter’s Shock Absorber (T1237) ….......................... $29.95
Removes Lead, Moly, Cadmium, Antimony, Zinc, etc.
• No harsh Solvents or Chemicals
• Gentle on Skin
Wear on wrist to absorb recoil energy and
reduce stress on tendons in wrist and elbow.
◆ Hand Soap (non-abrasive)
– 8oz Bottle: (T1262-8oz) = $3.95
– 1gal Bottle: (T1262-1gal) = $23.95
◆ Abrasive Hand Soap
– 8oz Bottle: (T1232-8oz) = $4.95
– 1gal Bottle: (T1232-1gal) = $29.95
®
D-Wipe Towels — No Water? No Problem!
Quick, safe, effective cleaning of lead and shooting
residues … without water.
• Safe for tools and all washable surfaces - even firearms!
• Gentle on your skin.
– 40 count container (T1233-40ct) = $4.95
– 150 count container (T1233-150ct) = $16.95
LENS CLEANERS & ANTI-FOG
• Reduces Felt (perceived) Recoil & Muscle Fatigue
• Improves Recovery Time Between Shots
®
GRIPMASTER Hand & Finger Exerciser (T1257-x) ….. $14.95
Increases Strength, Control, Endurance and Coordination.
◆
- (T1257-XL)
– 3 lbs per finger for light resistance
◆ BLUE (Light Tension) - (T1257-L)
– 5 lbs/finger for average hand
◆ RED (Med. Tension) - (T1257-M)
– 7 lbs/finger for above average hands
◆ BLACK (Heavy Tension) - (T1257-H)
– 9 lbs/finger for strong hands
◆ PRO® (Ex-Heavy Tension) - (T1257-pro)
– 11 lbs. for extra strong hands = $19.95
Impact Sport Electronic Earmuffs (T1363) …………….. $59.95
™
– By Howard Leight
Clarity CLEAN It Lens Towelettes ……….……….…. $12.95 Amplifies sound while automatically blocking
hazardous noise levels from gunfire.
— Safe for all Lenses & Lens Coatings
• Automatic Noise-Blocking • NRR 22
Works on the new Superhydrophobic & AR coatings
• Stereo Sound Amplification
where other cleaners just bead up and roll off!
• Aux Input • Water Resistant • Low Profile Design
• Neutral pH • No Silicones • Ammonia Free
Pre-moistened disposable lens wipes.
NEW! Impact Pro Electronic Earmuffs (T1583) ………. $89.95
Great for when you need to travel light!
™
– By Howard Leight
• Individually foil-packed disposable wipes
• Scratch-free
Amplifies sound while automatically blocking
– 51 count box of lens wipes.
hazardous noise levels from gunfire.
®
®
®
®
• Automatic Noise-Blocking
Clarity DEFOG It (T1246): ………….…………………….. $5.95 • Stereo Sound Amplification
Dry Anti-Fog Cloths
• Safe for all optical coating including IR & AR
• Multiple Applications from each cloth
• Contains No Silicones
– 3 reusable foil-packed cloths in a HDPE pocket case.
®
Clarity DEFOG It
®
• Aux Input
• NRR 30
• Water Resistant
™
COOL PADS – By Howard Leight™ (T1362) .…….……........ $4.95
Super Absorbent Earmuff Pads
Apply to the cushions of your earmuffs.
• Absorbs 15 Times their Weight in Moisture
(T1252): ….…...……………………….. $8.95
• Keeps Ears Cool in Summer / Warm in Winter
Anti-Fog Liquid Concentrate
• Simple Peel-n-Stick Application
Longest lasting anti-fog for all lenses and lens coatings.
– 5 pair per pack
• Safe for all optical coatings including IR & AR
• Highly effective on the new Super-Hydrophobic Lenses
• Superior Performance on AR and “Hard” Coat Lenses
– 5ml Bottle of Defog It concentrate & 6”x6.75” Microfiber Cloth
Red-E-Fit Earplugs – By Silencio® (T1474) .…….……...... $24.95
Disposable Foam Earplugs
•
•
•
–
Soft Foam for Superior Comfort • NRR 31
Tapered Shape for Easy Insertion
31 dB NRR Rating for Outstanding Protection
200 pair per box
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
HOLSTERS & CONCEALMENT ACCESSORIES
RAIN GEAR FOR YOUR RIFLE/SHOTGUN
Concealment Vest – by Blue Stone (T1432-xxx) ...….…... $64.95* Gun SLICKER - By Alpine Innovations (T1390) ….………. $24.95
Draws little attention in a comfortable style!
•
•
•
•
–
–
Protects your rifle from rain, mud, brush scratches
and other harsh outdoor elements.
2 Inside Gun Pockets are Waterproof/Sweat proof
6 Elastic Magazine Pockets (3 on each side)
12 Additional Cargo Pockets + Hand Warmer Pockets
Durable 80% Polyester / 20% Cotton
Colors: Olive, Tan and Black - (Olive shown in photo.)
Sizes: M to 6XL (* Sizes 3XL thru 6XL are $69.95)
• Adjusts to Most Rifles and Shotguns
• Quick On / Quick Off
• Water Resistant, Tear Resistant
• Folds Inside Integral Storage Pouch
– Available in Kings Mountain Camo (shown)
To create part number: Add –G for Olive, –B for Black, -T for Tan,
then add Size. For example: T1432–B2XL is a Black vest in size 2XL
AR SLICKER - By Alpine Innovations (T1543-x) …………… $24.95
Concealed Carry Belly Band ………………..…….………... $19.95 Protects AR Style rifles from rain, mud, brush
•
•
•
•
–
–
scratches and other harsh outdoor elements.
1 Pistol Pocket with Adjustable Retention Strap
2 Magazine Pockets
5" Wide Heavy Duty Elastic w Velcro Closure
Wear Comfortably Under Most Clothing
Small : Fits 28" to 34" Waist: (T1564-S )
Large : Fits 36" to 44" Waist: (T1564-L)
• Adjusts to Fit 30” to 43” Rifles
• Quick On / Quick Off
• Water Resistant, Tear Resistant Tricot Fabric
• Folds Inside Integral Storage Pouch
– Available Colors: – Flat Dark Earth (shown)
– Kings Mountain Camo NEW!
VersaCarry Gen II (T1444-x) ...….…….………………….. $24.95
The most unique IWB holster available!
Carries a firearm by the inner barrel diameter.
• Ambidextrous – Reversible Trigger Guard
• Works with Most Guns of Same Caliber
• Works with Any Accessory Combination
®
• Constructed of Durable Kydex
– See web site for available sizes.
GUN-MAP - Arizona Where-to-Shoot Guide (T1393) …... $6.50
A first-of-its-kind, “GUN MAP” was released in April 2011,
to inform the public where shooting is legal in the state
BLOWOUT
of Arizona, for training and safety purposes.
SALE!
Note: Blowout Sale limited to stock on hand. Some sizes are already sold out.
Bed Side Gun Bracket …………….……………………..…... $34.95
Keeps your handgun within arms reach as you sleep!
•
•
•
•
–
–
Slips Between Mattress & Box Springs
Belt Clip Holster Included
Also Works with Most Belt Clip Holsters
Use on Right or Left Side of Bed
Small : Holster fits Sm to Md frame pistols: (T1565-S )
Large : Holster fits Md to Lg frame pistols: (T1565-L)
Bed Side Shotun Bracket (T1566) ….………...................... $29.95
Keeps your shotgun within arms reach as you sleep!
•
•
•
•
•
Slips Between Mattress & Box Springs
Fits Most Shotguns and Rifles
Sturdy Steel Brackets with
Vinyl Coating Will Not Scratch Finishes
Use on Right or Left Side of Bed
Quick-Shot™ Shotgun & Rifle Holster
Reduces the burden on your arms, keeping
you rested & alert for the next shot.
•
•
•
•
–
Waterproof & Abrasion Resistant Polyester
Reinforced for Support / Foam Padded for Comfort
Fits Butts/Recoil Pads up to 5-3/8” Length.
2-inch wide Belt w 20/12 GA Shell Loops
Colors: Black (T1466-B) = $39.95
®
Mossy Oak Duck Blind© Camo (T1466-C) = $44.95
Ready Aim Rifle Carrier™ - By All Day Gear (T1506).
Rest your Rifle or Shotgun while using your
Binoculars.
• Hands Free Support
• Quick to Remove Rifle and be Ready on Aim
• Reduces Fatigue on Long Hunting Days
BOOKS & MAPS
$59.95
• 3’x2’ Full Color Map
• Identifies More Than 60 Shooting Spots
• Includes Indoor and Outdoor Ranges
• Contact Information for Each Range
• Includes Roads, Land Ownership, Physical Features,
Political Boundaries and More.
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
AIRSOFT GUNS
AIRSOFT ACCESSORIES
Tanfoglio Gold Custom – (T1477-G) ...………………… $134.95 Metal Universal Pistol Mount – (T1489) ...……………… $12.95
•
•
•
•
•
–
Full Metal Construction
Weaver Style Sight Rail
Blowback Mechanism
Semi-Automatic
CO2 Powered
Spare Magazines (T1477-M) = $35.95 ea
Manufactured Mount a Scope or Red Dot Sight on
any airsoft gun that has a Picatinny accessory rail.
•
•
•
•
•
–
Iron Sights – Adjustable
Blowback Mechanism
Semi-Automatic
CO2 Powered
captured BBs slowly release, slide down target
and drop into the collection tray. The surface is
washable and can be used over and over again.
Play all the familiar dartboard games!
• Fits Picatinny Standard Rails
• One-piece Extruded Aluminum Construction
• Black Finish
FIREPOWER™ Dartboard Sticky Target – (T1486) …… $17.95
Tanfoglio Limited Custom – (T1478-G) ...……………… $124.95 A sticky rubber surface captures airsoft BBs. The
Colt M1911 A1 – (T1479-G) ...………………………….... $134.95
•
•
•
•
•
–
Blowback Mechanism
Semi-Automatic
Green Gas Powered
These BBs work in all 6mm Airsoft guns.
Pro Grade BBs fly straighter and jam less
frequently than BBs of lesser quality!
Blowback Mechanism
Semi-Automatic
Green Gas Powered
Blackwater 1911 R2 – (T1490-G) ...……………………
•
•
•
•
•
–
Blowback Mechanism
Semi-Automatic
CO2 Powered
Sticky Surface Holds BBs
Tray Under Target Collects BBs for Reuse
Leaves No Sticky Residue on BBs
Shelf or Wall Mount
Platinum Series Airsoft BBs – (T1495) …………………… $17.95
Sig Sauer P226 – (T1480-G) ...…………………………… $145.95
•
•
•
•
•
–
•
•
•
•
• 6mm .20g BBs
• Guaranteed Round to ±.01mm
• 5000 Count Bag with Zipper Seal
FIREPOWER™ BB Speed Loader – (T1481) ……………… $5.95
Makes loading airsoft magazines easier and faster.
Each push of the plunger loads 5 BBs.
$134.95
•
•
•
•
•
Holds 100 BBs
Works with Most Airsoft Magazines
Works with 6mm BBs of Any Weight
See-through Plastic to Monitor BB Level
Plunger Latches in Down Position to Protect Plunger
King Arms Green Gas
Compatible with all airsoft and air guns that use Green Gas
Gives crisp blowback recoil with every shot.
Contains Silicone Oil to protect and lubricate O-rings,
and allow your airsoft gun to fire smoothly.
S&W M&P – (T1493-G) ...………………………………… $159.95 – 8oz Can (T1483-1) = $14.95
•
•
•
•
•
•
–
Metal Slide / Polymer Frame
Iron Sights – Fixed (with night sights)
Interchangeable Backstraps
Blowback Mechanism
Semi-Automatic / Full Auto
Green Gas Powered
– Case of 12, 8oz Cans (T1483-12) = $109.95
FIREPOWER™ 12g CO2 Cartridges
Compatible with all airsoft and air guns that
use a 12g CO2 cartridge.
– 5-Pack of Cartridges (T1482-1) = $4.95
– Five, 5-packs (T1482-5) = $19.95
Propane Adapter – (T1488) ………………….……………….. $15.95
Power your Green Gas airsoft gun with
inexpensive and readily available propane.
• Fits all standard Disposable Propane Cylinders
• Polymer Tip Won’t Damage Magazine Valves
• For Use with All Green Gas Airsoft Guns
Softair Silicone Oil – (T1487) ………………………….. $7.95
Pure Silicone Oil is the best lubricant for your Airsoft Guns.
— 2.20 oz (65ml) Pure Silicone Oil
— In Aerosol Can with Applicator Straw
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
80% RIFLE KITS & TOOLING
KNIVES, SHARPENERS, TOOLS & FLASHLIGHTS
AR-15 L1 Basic – (T1546) ...……………………………... $898.95 Carbon Fiber & Ceramic Knife (T1387) ......................... $89.95
• Includes All Parts Needed
• Upper, Lower & Handguard
are “In The White” and
Require Finishing
• Sights are Not Included
®
• 1 30rd PMAG Magazine Included
AR-15 L1 w Red Dot Sight – (T1545) ......…………..
•
•
•
•
Ceramic E.O.D. Knife (T1388) ........................................ $34.95
• Black Ceramic Blade
$1398.95 • Non-Magnetic
• Upper, Lower & Handguard
are “In The White” and
Require Finishing
• LUCID HD7 Red Dot Sight Included
®
• 1 30rd PMAG Magazine Included
AR-15 FIXTURE – (T1547) ...…………………………........ $99.95
Fixture Guides:
• Drilling Holes
• Cutting Trigger Slot
• Machining Trigger Pocket
AR-15 Bit Set – (T1548) ...…………………………………. $79.95
•
•
•
•
•
•
Black Ceramic Blade
Weighs Just 60 grams!
Carbon Fiber Scales
404 Stainless Steel Frame
31/64" Drill Bit
3/8" Drill Bit
1/4" Drill Bit
5/32" Drill Bit
3/8" End Mill
1/4" End Mill
80% PISTOL KITS & TOOLING
• Non-Conductive
®
• Zytel Plastic Handle
®
• Zytel Plastic Sheath
NEW! Rigger’s Knife with Marlin Spike (T1536) .......... $89.95
•
•
•
•
•
•
•
•
Black Ceramic 2.88" Blade
2.5" Marlin Spike with Shackle Key
Skeletonized 420 SS Frame
Frame Lock
Pocket Clip
Lanyard Hole
Swivel Eye Sham Hook Include
Weight = 3.06 oz
NEW! Ceramic 9mm Retractible Cutter (T1537) .......... $12.95
•
•
•
•
•
Ceramic Blade
11 Snap Off Segments
Blade Locks at Each Segment
Pocket Clip
• Length = 5.31" (closed)
Absolutely No Metal to Rust!
• Weight = 11g
Aligner™ Precision Sharpening System (T1450) ....... $89.95
Insures consistent angles, precise edge bevels,
and expert sharpening strokes. Specially built
1911 Pistol Kit – (T1549) ...…………………………...… $1049.95 for UniqueTek with the XX-Fine Stone …
which is not normally included in this kit!
•
•
•
•
All Stainless Steel Parts
Match Grade Barrel & Bushing
Slide Cut for Para Ordnance Sight
Sights and Magazine Not Included
1911 FIXTURE – (T1550) ...………………………….......... $99.95
Fixture Guides:
• Decking Top of Frame
• Slide Fitting
• Sear, Hammer and Pin Holes
1911 End Mill Bit Set – (T1551) ......……………………… $99.95
•
•
•
•
•
#22 Drill Bit
#35 Drill Bit
#52 Drill Bit
17/64" Key Cutter
1/2" End Mill
• Monocrystaline Diamond Stones Sharpen Fast
• Stainless Steel w Zytel Comfort-Grip Inserts
• Includes: Aligner™ Blade Guide, Stone Holder,
4 Diamond Stones, Serrated Blade Attachment,
Storage Case and Detailed Instructions.
Fire Rod™ (T1538) ………………..……………………….. $14.95
Combines a Ferrocerrium fire starter with a
Micro Folding Ceramic Knife/Striker.
•
•
•
•
5/16” dia x 1-1/8″Ferrocerium Rod
Ceramic Striker
Striker Blade Doubles as a Micro Knife
Type I Paracord Lanyard in Blaze Orange Camo
UniqueTek, Inc.
Mesa, AZ
Phone: 480-507-0866
Toll Free: 855-507-0866
OTHER UNIQUE PRODUCTS
◊◊◊◊◊◊◊◊ NEW PRODUCT SHOWCASE ◊◊◊◊◊◊◊◊◊
Ultra-Hanger™ - By UniqueTek (T1433) ……………….. $9.95 ea BinoSlicker Bandit (T1586) ………………….…..……….. $15.95
A heavy duty hanger for all your camping, hunting
and tactical gear. Won’t break, dumping your
expensive gear on the closet floor!.
• Max Load Rating = 112 pounds!
• Extra Wide: 18-1/2”
• Large 1-1/2” Hanger Hook
• Extra Wide 3-3/4” Strap Notches
• Double “J” Hook for Back Packs
— Each (T1433) = $9.95
— 3-pk (T1433-3) = $26.95
— 6-pk (T1433-6) = $47.95
ARIZONA GUNSLINGER® PEPPER SAUCE ……………. $5.95
A thick rich pepper sauce with the zing of a hot shootin' iron.
Its great taste, however, makes it acceptable even to more
sensitive taste buds. It’s got the heat you can eat!
Available Flavors
• Habanero Sauce – (T1453-4)
• Habanero & Mango Sauce – (T1453-5)
• Variety Pack of Five 3/4oz bottles – (T1453-6) = $4.96 ⬆
PigTail® Food Flipper (T1457-x)
Unique designed lightly pierces the edge of virtually any solid food. A
quick flip of the wrist and the food is turned over. Handles almost
anything from an 8 lb. rack of ribs, to hot dogs, steaks, chicken, bacon,
shrimp, vegetables, you name it!
12” “Baby” PigTail
19” “Long” PigTail
• Turns, Flips and Moves Food in a Flash!
• Does not Scrape up Grease Like a Spatula
• Does not Bleed or Mark Meats
• Replaces Tongs, Forks and Spatulas
— Baby (T1457-1) = $12.95
— Long (T1457-2) = No Longer Available Individually
— Combo-Pack (one of each) (T1457-3) = $24.95
•
•
•
•
•
Fits Over Binocular Eye Cups
ScopeSlicker Bandit (T1587) ………………….…..……… $10.95
•
•
•
•
•
Fits Over Spotting Scope Eye Cups
XL 650 Case Chute Extension (T1590) ………………… $29.95
By Secure Firearms Products
Lengthens cartridge ejection chute, allowing use
of a much larger bin to capture loaded rounds!
Just set an Akrobin, Ammo Can or other handy
container on the bench under the chute.
• Attaches to XL 650 Chute/Bin Mount
• Extends Chute by 6.25"
• Load More Ammo Before Emptying Bin
• Use Any Convenient Bin to Collect Ammo
Note: Press must be on a Strong Mount (not included)
BUGBite Holster (T1591-X) ……………………………..… $39.95
By BUGBite Holsters
So comfortable you’ll forget you are even
carrying a pistol.
•
•
•
•
•
•
•
More Comfortable than an Ankle Holster
Conforms to Your Calf for Comfort & Security
Keeps Firearm Oriented Vertically
®
No Velcro or Snaps for a Silent Draw
Light Weight Breathable Neoprene
One Holster Fits Many Firearms
Available in 5 Sizes to Fit Most Calf Diameters
Rolla Roaster (T1585) [Sold as a Pair] – NEW! …..…….. $12.95
The Rolla Roaster has a little thumbwheel on the handle. Just a swipe
of your thumb rotates the fork … without needing to rotate the handle
in your hand.
Great for: Hotdogs, Marshmallows, S'mores, Toased Buns, etc!
•
•
•
•
Telescopes from 12" to 42"
Rotisserie Turning Knob
Heat Resistant Wood Handle
Extra Long All Stainless Steel Fork
◊◊◊ We are continuously adding new products. ◊◊◊
◊◊◊ Please visit our web site to see all the latest items. ◊◊◊
Sign up to receive our NEWSLETTER.
For Sales, New Products, “Tips” Files, Events and More!
Simply scan QR code from your mobile and send email.
Or text UNIQUETEKNEWS to 22828.
Or email [email protected] and request the Newsletter.
PART NUMBERS: The numbers in parentheses e.g. (T1234) are UniqueTek
part numbers and have been added to this catalog for the convenience of our
customers. These numbers do not reflect the manufacturer’s part numbers or
UPC codes for the products. Some products (e.g. reloading dies) have too
many variations to list all of their part numbers and prices in this catalog. In
those cases, please refer to our web site for a complete list of types and prices.
Prices as of 10/28/16. Prices subject to change without notice.
Rev. 10/28/16

UniqueTek Product Catalog

Transcription

Similar documents

Artax Vorderlader Germany Artax Vorderlader Germany

I load a good couple of calibres, and do a considerable amount of

SCI-Central Washington Chapter Rifle Raffle

The Oklahoma City Gun Club “Primer”

577 Revolvers - Bowen Classic Arms

The Oklahoma City Gun Club “Primer”

K9 SUPERFUEL TM Human Grade Ingredients

The Oklahoma City Gun Club “Primer”

Marquart MA-s `Charger`