Fifth Wheel Towing

Fifth Wheel Towing
Husky Tilt Plate 16K S
Straight Jaw Fifth Wheel Hitch
(Husky Silver Series)
Husky 16K S Tilt Plate Design Advantages:
• Addition of a pop out safety hookup indicator
• Engineered/designed tolerances for less noise
• Better fit of components for consistent performance and a
quieter ride
• Fore and aft adjustment on the uprights for
proper “hitch over axle” placement
• Unlike some slide bar style hitches, the sides
of the 16K S are open and allow the king pin
to swing without hitting the sides of the head
• Meets or exceeds SAE J2638 fifth wheel standards
• Superior finish
• Yellow zinc fasteners
• Compatible with all Husky custom install kits and earlier model X-16
Husky hitches
31313 16K S head shown with
31314 uprights and base rails;
order components separately
(see below)
The 4-way side to side, front to rear pivoting tilt plate provides easy hookup in most situations. The locking mechanisms
in tilt plate hitches do not tilt with the head; they remain stationary while only the king pin and tilt plate move.
Protect your short bed
pickup by using a
positioning device
like the Husky 10-16
Glider with your 16K S
31313 16K S Head shown
with 31196 Husky 10-16 Gllider
The Glider positions the 16K S
up to 10” on short bed trucks
Husky 16K S Tilt Plate Fifth Wheel Hitch (Straight Jaw)
Product
Husky 16K S
Use with all Fifth
Jaw
Pop-out
Fore/Aft
Wheels up to*
Style
Indicator
Adjustment
16,000 lbs.
Straight
Yes
2 Position
*Do not exceed vehicle manufacturer weight capacity.
**See www.huskytow.com for warranty details.
See next page to order
Warranty
**
5 years
16K S Features
Red indicates
16K S jaw in
open position
Green indicates
jaw in closed
position. Visible
indicator pin on
16K S verifies king
pin is engaged
31313 Head and
Cross-member Kit
H-1-B_HITCH • Rev. 1/29/15 • 1-B-1
Fifth Wheel Towing
HUSKY 16K S FIFTH WHEEL
HITCH CONFIGURATIONS
31313 16K S head shown
with 31196 Husky 10-16 Glider
and base rails; order components
separately (see below)
31313 16K S head shown with
32220 Husky 16K Roller and
base rails; order components
separately (see below)
31664 Kit consisting of
31313 16K S head with
31314 Uprights. Just add base
rails for a complete hitch.
Husky 16K S Tilt Plate
Fifth Wheel Hitches
16K S
COMPONENTS
31313
31314
31196
32220
30686
Kit # for Pickup:
Plus
16K S Head/Cross-member with Uprights
Long Bed
31664
16K S Head/Cross-member with Husky 16K Roller (see page 6)
Short Bed
32354
+
+
Uprights or Positioning Device:
Plus
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS:
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION
Head/Cross-Member
16K S Head/Cross-member plus Uprights (order separately)
31313
16K S Head/Cross-member plus Husky 10-16 Glider (see page 6) (order
separately)
31313
16K S Head/Cross-member plus Husky 16K Roller (see page 6) (order
separately)
31313
* Installation
Base Rails*
30686
30686
Base Rails*
+
+
Long Bed
31314
Short Bed
31196
+
+
30686
+
Short Bed
32220
+
30686
30686
Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
31313 16K S Head
shown with
31314 Uprights
and base rails; order
components above
The strong, basic 31314 Uprights (2 per set) are the standard
for long bed truck configurations on both the Husky 16K S and
16K W Fifth Wheel Hitches. The uprights securely support the
hitch head and attach to the base plates (order separately).
H-1-B_HITCH • Rev. 1/29/15 • 1-B-2
Fifth Wheel Towing
Husky Full-Feature Articulating Head
Wrap-Around Jaw Fifth Wheel Hitch
• MORE FEATURES in a sleek Husky design
• LARGE SELECTION of no-drill/limited
drill applications
Husky Full-Featured Articulating Head Design Advantages
• Improved pop out safety hookup indicator
• Handle moved forward, further from the king pin box
• Foam grip handle for easier operation
• Self locking and release handle
• No need to manually open the jaw to hitch up
• Patented Anti-Walk wrap around jaw
• Engineered/designed tolerances for less noise
• Better fit of components
• Fully articulating head (the jaw moves with the head)
• Fore and aft adjustment on the uprights for proper “hitch over axle placement”
• Improved cross member with castle nut
• Meets or exceeds SAE J2638 fifth wheel standards
• Radius added to the top plate for rugged appearance
• Superior finish
• Yellow zinc fasteners
• Compatible with all Husky custom install kits and earlier model Husky hitches
• Easy installation options
• Weight ratings that meet the needs of the
RV industry
• Only line of fifth wheel hitches with fore
& aft upright adjustment
• Safety hook-up indicator on all models
• Very competitive pricing
• Less inventory investment required
Husky Silver Series
26K W
16K W
31326 16K W head shown with
31314 uprights and base rails; order
components separately (see next page)
See following pages to order
Full Featured 16K W & 26K W Features
THE NEXT GENERATION
OF FIFTH WHEEL HITCHES
On the full-featured series, orange indicates the jaw is open
No orange
means
you’re latched
Castle Nut secures head and reduces noise
Wrap around
jaw fully
encloses
trailer king pin
31318 26K W head shown with
31325 uprights and base rails;
order components separately
(see next page)
A full articulating head allows for the
easiest hookups. Articulating heads
move with the motion of the trailer, not
the tow vehicle, for a smoother ride on
rough roads. The locking mechanisms in
articulating heads move side to side
with the king pin.
Husky Full-Featured Articulating Head Fifth Wheel Hitches (Wrap-Around Jaw)
Product
Husky 16K W
Husky 26K W
Use with all Fifth Wheels up to*
Jaw Style
16,000 lbs.
Wrap
26,000 lbs.
Wrap
*Do not exceed vehicle manufacturer weight capacity.
Pop-out Indicator
Fore/Aft Adjustment
Yes
2 Position
Yes
3 Positions
**See www.huskytow.com for warranty details.
H-1-B_HITCH • Rev. 1/29/15 • 1-B-3
Warranty**
5 years
10 years
Fifth Wheel Towing
HUSKY 16K W FIFTH WHEEL
HITCH CONFIGURATIONS
31326 16K W head shown with
32220 Husky 16K Roller and base
rails; order components separately
(see below)
31326 16K W head shown
with 31196 Husky 10-16 Glider
and base rails; order components
separately (see below)
31666 Kit consisting of 31326 16K W
head with 31314 Uprights. Just add
base rails for a complete hitch.
16K W
COMPONENTS
31326
31314
31196
32220
30686
Kit # for Pickup:
Plus
16K W Head/Cross-member with Uprights
Long Bed
31666
16K W Head/Cross-member with Husky 10-16 Glider (see page 6)
Short Bed
31667
16K W Head/Cross-member with Husky 16K Roller (see page 6)
Short Bed
32392
+
+
+
Uprights or Positioning Device:
Plus
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS:
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION
Head/Cross-Member
16K W Head/Cross-member plus Uprights (order separately)
31326
16K W Head/Cross-member plus Husky 10-16 Glider (order separately)
31326
16K W Head/Cross-member plus Husky 16K Roller (order separately)
31326
* Installation
+
+
+
Long Bed
31314
Short Bed
31196
Short Bed
32220
+
+
+
Base Rails*
30686
30686
30686
Base Rails*
30686
30686
30686
Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
31326 16K W Head
shown with
31314 Uprights
and base rails; order
components above
Already have a Husky 10-26
Glider? You can use your
Husky 16K W Head on the
Husky 10-26 Glider also
H-1-B_HITCH • Rev. 1/29/15 • 1-B-4
Fifth Wheel Towing
HUSKY 26K W FIFTH WHEEL
HITCH CONFIGURATIONS
31318 is the 26K W
Head and Cross-member
Kit, ready to configure
to your truck
31690 Kit consisting of
31318 26K W head with
32042 Husky 10-26 Glider.
Just add base rails for a c
omplete hitch.
31318 26K W Head
shown with
31325 Uprights
and base rails; order
components below
31668 Kit consisting of 31318 26K W
head with the extra-strength 31325
Uprights. Just add base rails for a
complete hitch.
26K W
COMPONENTS
31318
31325
32042
30686
Kit # for Pickup:
Plus
26K W Head/Cross-member with Uprights
Long Bed
31668
26K W Head/Cross-member with Husky 10-26 Glider (see page 7)
Short Bed
31690
+
+
Uprights or Positioning Device:
Plus
CHOOSE A PRE-CONFIGURED KIT AND ADD BASE RAILS:
OR BUILD YOUR OWN HUSKY 16K W HITCH CONFIGURATION
Head/Cross-Member
26K W Head/Cross-member plus Uprights (order separately)
31318
26K W Head/Cross-member plus Husky 10-26 Glider (order separately)
31318
* Installation
+
+
Long Bed
31325
Short Bed
32042
+
+
Base Rails*
30686
30686
Base Rails*
30686
30686
Kits sold separately (see Base Rails/Brackets). Husky offers vehicle specific install kits with universal or limited drill installations.
Popular Replacement Parts for 5thWheel Hitches (Black or Silver Series)
Replacement Rail Hitch Pins and Spring Clips.
Description
Part #
Popular Replacement 5th Wheel Hitch Parts
Bag/4 Rail Hitch Pin, 1/2" x 4-1/8" (3-1/2" Usable Length)
Spring Clip, Bulk
Bag/4 Spring Clip
30003
33792
30004
H-1-B_HITCH • Rev. 1/29/15 • 1-B-5
Fifth Wheel Towing
POSITIONING DEVICES
FOR SHORT BED TRUCKS
31196
Husky 10-16 Glider
LIGHTER WEIGHT FOR 16K HITCH INSTALLATIONS
•
•
•
•
•
•
•
•
•
•
•
•
•
•
For units up to 16,000 lbs.
10" of travel
Quiet due to reduction in metal to metal contact
Easy to operate ergonomic handle
No bind mechanism
Installs in current 4-bolt and 10-bolt base rails with a 20-5/8"
footprint
Can be used in both black and silver series hitches
Travel is on a single composite rail for long wear and high loads.
Composite rail will not rust like metal wheels
Balanced system allows easy movement
Lighter weight than 26K glider for easier installation
Passes SAE J2638 requirements
Beautiful Silver Powder coat rated for 500 hours salt fog resistance
US Patent #8,727,369
Description
Husky 10-16 Glider
31196 Glider
shown with
31313 Husky 16K S
and base rails
Rails, fifth wheel
head and Glider sold
separately.
Part #
31196
31196 Glider
shown with
31326 Husky 16K W
and base rails
Husky 16K Roller
32220
•
•
•
•
•
NEW!
32220 Roller
shown
with Husky
16KS
32220 Roller shown
with Husky 16KW
16,000 lb. capacity
Moves the hitch head 9"
Easy to assemble
Visible locking pins for safe operation
Powder coat finish for durable scratch and
corrosion resistance
Husky’s 16K Roller provides all the basic roller functions to equip short
bed trucks for towing fifth wheel trailers weighing up to 16,000 pounds.
Husky’s economical roller provides needed truck-to-trailer clearance for
low speed maneuvers. Installs with just four pins and clips. The Husky
Roller’s lift adjustment lets you minimize the distance between the
wheels and the rails for smooth operation. It even includes two handles
for versatility: one for the Husky 16KS, and one for the 16KW. Works in
the base rail slots spaced 20-5/8” apart (base rails not included). Husky
recommends using the #32059 Center Bolt Kit for proper installation.
Use only Husky 5th wheel hitches with the Husky 16K Roller.
Description
Husky 16K Roller (without fifth wheel head/cross member assembly)
Center Bolt Kit (for proper installation)
H-1-B_HITCH • Rev. 1/29/15 • 1-B-6
Part #
32220
32059
Fifth Wheel Towing
Husky 10-26K
Glider
• For units up to 26,000 lbs. with a 2” king pin
• 10” of travel
• Quiet due to the reduction of metal-to-metal
contact
• Easy to operate ergonomically designed handle
and latching mechanism: no more pulling and
twisting of a handle
• Eliminates working with pins or latches
which bind when on uneven ground
• Installs to our current rails
and all standard rails in the
20-5/8” footprint
• Can be used on our Silver or
Black series 16K and 26K fifth wheel hitches
• A balanced system allows easy movement along the 10”
of travel
• Travel is on two compatible composite materials designed
for long wear, high loads and resistance to the elements
• Yellow zinc chromate hardware to resist corrosion
• US Patent #8,727,369
• Lab tested—road proven!
32042 Husky 10-26 Glider
assembly pictured with 26 KW head;
order components separately
No more wear on rails caused
by metal rollers that can grind
off paint to cause potential rust
areas! (See illustration 4)
“No-Bind” Latching Mechanism
Today with any roller, if you have load against the locking pin/mechanism, you
have to jockey the truck and keep getting in and out trying the handle until it
disengages. With the Husky 10-26 Glider, you just put the operating handle in the
Unlock position, get in your truck and drive forward or back, depending on what
position you need to be in. Even if you are on uneven ground and the locking
mechanism has pressure against it, you no longer have to jockey the truck and get
out again to try the handle. With the Husky 10-26 Glider, you just move slightly
forward or aft and listen for the locking mechanism to automatically release when
the pressure subsides, allowing the flipper to automatically lock in the next position. No more 2-person job, no more in-and-out of the truck to work the handle.
1
Compression cylinder takes
the pressure from the load
on the mechanism
Truck moves forward,
compression cylinder
relaxes to allow flipper
to work
Flipper automatically
selects the next lock
position, while you are
still in your truck
Description
Husky 10-26 Glider
Part #
32042
Composite materials glide
to prevent metal-on-metal
grinding for quiet operation
H-1-B_HITCH • Rev. 1/29/15 • 1-B-7
2
3
4
Fifth Wheel Towing
HUSKY FIFTH WHEEL
LUBE DISC
The easy way to prevent friction without grease!
Just slip the Fifth Wheel Lube Disc onto
the pin; fits all types of fifth wheel trailers.
A real convenience! Pk/1.
Fifth Wheel Lube Disc:
33862 Standard, 8" Dia. #33862 100
34914 Heavy-Duty 10" Dia. #34914 50
32256 NEW! Heavy-Duty 12" Dia. #34914
50
HUSKY 5TH WHEEL
KING PIN LOCK
Protect your fifth wheel with the Husky King Pin
Lock. Just slide the U-bracket into the grooved
portion of the king pin and insert the lock pin.
38790 Fifth Wheel King Pin Lock
#38790
12
H-1-B_HITCH • Rev. 1/29/15 • 1-B-8