NEW - SAM Outillage

Transcription

NEW - SAM Outillage
INDISPENSAM
For us, today is
already tomorrow!
DISCOVER
OUR
CONNECTED
TOOLS
SINCE
D E P U1921
I S 19 0 6
T O O L S
I N V E N T O R
www
www.sam.eu
TODAY IS ALREADY TOMORROW!
SAMtech’, a special programme to design and develop the tools of tomorrow.
SAMtech’ also includes the management and development of tools for customers working in
highly sensitive environments (military, nuclear…). The funds recovered all go towards its research
programme.
French know-how
Creator
of tools
Expert knowledge of the raw
materials. To date, over 500 million
tools forged since the company
began.
2 patents
filed per
month.
Welcome to SAM!
Since 1921, the SAM brand has
been an ambassador for French
know-how in the tooling field.
Our great-grandfather François
Blanc made quality his life’s
work. Our ancestors were always
determined to provide our customers
with technical solutions.
A brand at the
heart of your
preoccupations
Safety
Our head in the
stars
Traceability
Optimisation
of your workstations
The nuts inside of
many space launchers
are tightened with
SAM torque wrenches.
Image.
Our first decision was that SAM
should become a family firm
once again in order to recreate
the company spirit.
SO NOW YOU
KNOW WHY YOU
SHOULD CHOOSE SAM?
We are ensuring that spirit lives
on by seeking to constantly develop
our products and prepare SAM
for its 4.0 revolution through
enormous investments in R&D.
CYLLENE
In 2015, SAM reinforced its
product launch process by
integrating a PLM tool called
Cyllène.
In the beginning was the tool
Today the FSH group includes the
brands RODAC, PTS, MDS, SAM
OUTILLAGE…
To be validated, every new
product in this catalogue has
to be approved on 22 different
points (compliance with
standards, quality tests …)
Read the complete article on www.sam.eu
François Blanc.
Creation of the Forges
Stéphanoises by
François Blanc.
2
Creation of the SAM brand.
The first catalogue…
SAM created its
lifetime warranty concept.
1953
1933
I N N O V A T I O N
1921
O F
1906
9 4 Y E A R S
Félicien Blanc.
Manufacturing of the world’s
first hollow offset socket
wrench.
INDISPENSAM
Pierre Blanc.
International development
and delivery of a turnkey
factory to Chili.
The revolution in the way we buy choose and goods is underway.
More than just a product, you want a dedicated solution, choice and a service.
The IndispenSAM 2015, the digest of our product offering, meets those requirements:
DEDICATED SOLUTIONS
s#USTOMISEDPURCHASESCHOICEOFROLLERCABINETCOLOURSCUSTOMISEDFOAMINSERTSLOGOx
s0OOLEDPURCHASESINTELLIGENTROLLERCABINETSiBUNDLESwOFTIGHTENINGPRODUCTS
s3OLUTIONPURCHASESOUR2OLLER#ABINETAND2ATCHETPROGRAMMESFORAGLOBALSOLUTION
YOUR CHOICE
3TARTINGFROMTHETASKTOBEDONEWHETHERSIMPLEORCOMPLEX3!-PROPOSESTHEAPPROPRIATE
TOOLATTHEMARKETPRICE
SERVICE
3!-ADAPTSTOYOURBUDGETWITHOUROFFERSSETSOFPRODUCTSSINGLEPRODUCTSAND
NOWFORTHElRSTTIMEiBUNDLESwOFTIGHTENINGPRODUCTSINTHEMOSTCOMMONLY
USEDSIZES
1983
1963
Imagine that thanks to this
innovation you can do every operation with the correct tool, according to the
protocol defined and in total safety. It is a new mobile
technology, unique in hand
tools, that SAM will be offering every user in the future.
FOR SAM,
CHOICE IS
A RIGHT
Michel Blanc.
Opening of the SAM
TOOLS Belgium subsidiary.
In 1986 our SAM
HERRAMIENTAS
subsidiary opened
in Spain.
Frédéric Champavère and
Olivier Blanc launched the
Cap 4.i plan and bought
out RODAC
International, PTS
and SOVA2i.
2013
Imagine your workshop
equipped with all these permanently connected tools,
with the certainty that none
of them is missing and that
they are all in their place.
And if you are missing one,
SAM will find it for you.
RFID KEY
2011
TOMORROW
In December 2014,
the 1st connection
tools congress
named SAM
Outillage world
leader in connected
hand tools.
SAM was awarded the
EQUIP AUTO silver trophy.
See the «Chassons
l’obscurité»
(Chase away the
darkness)
lighting programme
on page 70.
3
www.sam.eu
YOUR
ASSOCIATED
SERVICES
SAM
SAM 4.0
In order to accompany the development of SAM connected tools,
SPECIALPROGRAMMESCONlGURATIONTRAININGDEVELOPEDBY3!-
are at your disposal.
TAILOR-MADE ADVICE
Whatever your specific need may be,
our dedicated service will provide
you with a solution.
s#USTOMISATION
s2OLLERCABINETSWITHAWIDECHOICEOFCOLOURS
custom-made storage foam…
MADE IN FRANCE
From its two production sites in
Saint-Etienne and Montpellier and with
its long-standing network of subcontractors,
all of them French, SAM designs, develops
and makes 60% of the products it sells in
France, thereby contributing to the brand’s
international reputation and its image as a
socially responsible company.
SAM IN FRANCE
This label refers to the SAM-branded
products that meet the APPROVALPOINTS
INOUR#YLLENEPROCESS. These products
meet specifications drawn up at our headquarters in Saint-Etienne and submitted
to industrial players recognised for their
know-how.
They are designed and then assembled in
our factories.
s4OOLSMADETOYOURDRAWINGSi/30wSERVICE
CLOSE PROTECTION
Every tool in the range benefits from the SAM
warranty.
A SERVICE THAT REASSURES
sEXPERTDEPARTMENTSWORKONADAILY
basis to repair and maintain your hand
and power tools.
NUMBERS TO CONTACT US
Customer Service Department /
Technical Department :
+33 (0)4 77 921 323.
s$OYOUHAVETECHNICALQUESTION/UR
TECHNICALEXPERTSANDENGINEERSAREHERETO
help you in your research.
CUSTOMER RELATIONS
4HE#USTOMER3ERVICEDEPARTMENTISHERETOHELPYOUFROM
-ONDAYTO&RIDAYFROMAMTOPM
s7EHAVEADEDICATEDDEPARTMENTTHATISABLETOANSWERTHEMOST
common questions immediately.
4
s)FYOURQUESTIONNEEDSALITTLEMORERESEARCHYOUWILLRECEIVE
an answer within 48 hours.
5% OF OUR TURNOVER IS SPENT ON
R&D
s)FYOUWISHTOACCESSYOURDATADIRECTLYTHE3!-,/'
platform is just a click away.
For the last three years, SAM has invested
more than 5% of its turnover in an ambitious
R&D programme named SAMTech in order
to improve the productivity, safety and
comfort of our customers.
INDISPENSAM
6
17
26
38
46
48
52
STORAGE
TOOLS SET
SOCKETS AND
ACCESSORIES
WRENCHES
PLIERS
SCREWDRIVERS
CUTTERS
54
60
61
62
66
70
73
TORQUE
CONTROL
PRECISION
TOOLS
MEASUREMENT
METAL REMOVAL
/ WORKING
STRIKING TOOLS
LIGHTING
MEASUREMENT
AND TESTING
DEVICES
74
76
82
84
86
88
89
ELECTRICIAN
DROP
PREVENTION
CONSTRUCTION
PLUMBING
WORK ON
WOOD AND
PLASTER-BASES
MATERIALS
PNEUMATIC
WORKSHOP
EQUIPMENT
CONTENTS
IndispenSAM 2015, digest of skills
Dear Customers, we wanted our 2015 edition to be closer to consumers with a carefully though-out, targeted and distinctive presentation.
It is indispensable that our catalogue provide customers with the right
information on the products.
s3ELECTIONGUIDESPROVIDEVERYPRECISEINFORMATIONONTHE
ADVANTAGESOFEACHTOOL
s$ISCOVERTHEPROGRESSIVENESSOFOURRANGES
5
www.sam.eu
STORAGE
SERVI-530
RV5Z
THE ECONOMICAL SOLUTION
PRACTICALITY
FO R SAMS,
C H O I C E I!
A RI G HT
SERVI-640L
LARGE VOLUMES
440FAZ
AUTONOMY
WHEREVER YOU GO
6
INDISPENSAM
STORAGE REACHES
THE SUMMIT
SERVI-640
CUSTOMISED
PURCHASES
415HZ
VERSATILITY
(Choice of
colours, customised
foam inserts...)
SERVANTE FME
ULTRA VISIBLE
415-SAFZ
ANTI-THEFT
SOLUTIONS
540-IZ
BE CONNECTED
7
ROLLER CABINETS
NEW GENERATION
5-DRAWER ROLLER CABINET
www.sam.eu
NEW GENERATION
6-DRAWER ROLLER CABINET
415HZ
416HZ
Drawers: 1 x 64 mm, 2 x 104 mm, 1 x 152 mm,
1 x 254 mm.
Drawers: 2 x 64 mm, 3 x 104 mm,
1 x 254 mm.
NEW GENERATION
7-DRAWER ROLLER CABINET
417HZ
Drawers: 3 x 64 mm, 3 x 104 mm,
1 x 194 mm.
1 stainless steel tray. Roller cabinet compatible with existing SAM modules (page 24-25).
New workstation height for more comfortable working! Height: 1000 mm. Width: 834 mm. Depth: 510 mm.
WITH «TOP» SYSTEM
(PARTIALLY OPENING DRAWERS).
To avoid any risk of the cabinet tipping over, the 415HZ, 416HZ and 417HZ models are fitted with a single drawer opening system.
As soon as one drawer is open, the anti-tipping system is active.
+ 20% MORE STORAGE SPACE THAN OUR STANDARD ROLLER CABINET!
PRACTICAL:
1 integrated screwdriver storage
system, 2 3-litre side storage
trays.
COMFORTABLE:
Integrated handle.
Key concealed in secure
housing.
Protective bumpers.
MODULAR
2 extra storage racks
on the sides.
NE
W
CLEVER:
Comes with 10 label holders.
AVAILABLE:
APRIL
4 wheels (Ø 125 mm) for easy movement.
8
INDISPENSAM
NEW GENERATION 5-DRAWER
ROLLER CABINET WITH ANTITHEFT SYSTEM
415-SAFZ
Drawers: 1 x 64 mm, 2 x 104 mm,
1 x 152 mm, 1 x 254 mm.
NEW-GENERATION 6-DRAWER
ROLLER CABINET WITH ANTITHEFT SYSTEM
NEW-GENERATION 7-DRAWER
ROLLER CABINET WITH ANTITHEFT SYSTEM
416-SAFZ
417-SAFZ
Drawers: 2 x 64 mm, 3 x 104 mm,
1 x 254 mm.
Drawers: 3 x 64 mm, 3 x 104 mm,
1 x 194 mm.
SECURITY: Features the anti-theft
bar: lock all your drawers in one go.
l
IGN
DES
by E
hir
Bac
RI
BAK
BOU
AVAILABLE:
APRIL
NEW GENERATION 5-DRAWER
ROLLER CABINET WITH ANTITIPPING SYSTEM
415SZ
NEW GENERATION 6-DRAWER
ROLLER CABINET WITH ANTITIPPING SYSTEM
416SZ
Drawers: 1 x 64 mm, 2 x 104 mm,
1 x 152 mm, 1 x 254 mm.
Drawers: 2 x 64 mm, 3 x 104 mm,
1 x 254 mm.
NEW GENERATION 7-DRAWER
ROLLER CABINET WITH ANTITIPPING SYSTEM
417SZ
Drawers: 3 x 64 mm, 3 x 104 mm,
1 x 194 mm.
SAFETY: The 415SZ, 416SZ and 417SZ roller cabinets are fitted with the SAB safety system (anti-tipping).
No more risk of them tipping over as this system prevents more than one drawer being open at a time.
9
ROLLER CABINETS
www.sam.eu
4-DRAWER STANDALONE, POWERED ROLLER CABINET
440FAZ
Dimensions: Height: 1000 mm. Width: 1101 mm. Depth: 500 mm.
4 drawer: 2 x 66 mm, 1 x 106 mm, 1 x 133 mm.
Wheels: Ø 125 mm, width 50 mm.
Laminated beechwood worktop.
2 swivel casters with lock/brake, 2 fixed casters.
Cabinet features:
- 1 autonomous power supply (mains rechargeable battery: 1 x 12V 75 Ah
battery) + 2 sockets + 1 on/off switch, 1 x 600 Watt 12V to 230V power inverter
.
-1 position to place a PEA pack to be ordered separately (see page 92 of the
IndispenSAM 2015) for a standalone pneumatic power supply.
- 2 Focal® speakers (bluetooth connection).
- 1 x 2 m extension lead for recharging the battery.
SECURITY
AVAILABLE:
PLEASE
ENQUIRE
Comes with an anti-theft bar.
With the anti-theft bar, lock all your drawers in one go.
SAFETY
With «TOP» system (partially opening drawers).
To avoid any risk of the cabinet tipping over, this roller cabinet
is fitted with a single drawer opening system.
This intelligent roller cabinet includes the Connected APS technology
designed by SAM’s engineers.
INTELLIGENT 5-DRAWER ROLLER CABINET WITH
INTEGRATED RFID SYSTEM
CONTACT
YOU WILL BE OFFERED A WORKSTATION
AUDIT IN ORDER TO CALCULATE THE SAVINGS
GENERATED BY THIS NEW GENERATION OF
ROLLER CABINETS.
540IZ
6 drawers: 2 x 60 mm, 3 x 100 mm, 1 x 220 mm.
Height: 1050 mm. Width: 705 mm. Depth: 500 mm.
+ POINTS:
-Access control to the different drawers in the cabinet.
-Integrated tool traceability during production and
maintenance operations.
-Tools are secured: no more lost tools.
-Possibility of tool sharing in a pre-defined working area.
-Security alerts sent to your smartphone.
-Analysis and optimisation of the workstation.
-Permanent inventory of the tools in the cabinet.
ADVANTAGES
Integration of your industrial processes
(displaying of stage in the maintenance or
manufacturing process).
Reality application (integration of a tutorial).
10
AVAILABLE:
PLEASE
ENQUIRE
Z
540I
INDISPENSAM
5-DRAWER ROLLER CABINET
PRICE
SERVI-540
DOWN
Drawers:
- 1 = 60 mm.
- 2 = 100 mm.
- 1 = 150 mm.
- 1 = 220 mm.
Height: 940 mm. Width: 770 mm. Depth: 480
80 mm.
7 DRAWERS LARGE ROLLER CABINET
STOP MODEL + STORAGE CABINET
6 DRAWERS LARGE ROLLER
CABINET STOP MODEL +
SERVI-640L
SERVI-740L
Drawers:
- 3 = 60 mm,
- 3 =100 mm,
- 1 =150 mm.
L 1036 x P 460 x H 950 mm.
Drawers:
- 2 = 60 mm,
- 3 =100 mm,
- 1 =210 mm.
L 1036 x P 460 x H 950 mm.
6 DRAWERS
PRICE
SERVI-640
DOWN
Drawers:
- 2= 60 mm
- 3=100 mm
- 1=220 mm
7 DRAWERS
PRICE
SERVI-740
DOWN
Drawers:
- 2= 60 mm
- 3=100 mm
- 1=220 mm
6 DRAWERS EXTRA-LARGE ROLLER CABINET
MODEL STOP + STAINLESS STEEL TRAY
SERVI-640AXLZ
Stainless steel tray. Load resistance:
1 ton. Payload drawer: up to 60 kg.
Drawers dimensions:
- 2 = 60 mm
- 3 = 100 mm
- 1 = 1 200 mm
Dimensiones :
L 1036 x P 460 x H 950 mm.
6 DRAWERS EXTRA-LARGE ROLLER
CABINET MODEL STOP + WOODEN TRAY
SERVI-640BXLZ
Wooden tray.
CONVENIENT
MORE ROOM: 1/3 MORESTORAGE THAN A STANDARD ROLLER CABINET
SECURITY
IAL
Large Diameter 125 mm
C
PE
S
ION
CT
ELE
S
WITH «TOP» SYSTEM (PARTIALLY OPENING DRAWERS).
TO AVOID ANY RISK OF THE CABINET TIPPING OVER, THE ROLLER CABINETS IN THE 40 SERIES ARE FITTED WITH A SINGLE DRAWER OPENING SYSTEM.
STRONG
ABS top reinforced with a hydrocarbon-resistant plate. Easy to clean.
Withstands a 950 kg load when static. Load per drawer: 30 kg.
CUSTOMISE YOUR CABINET WITH YOUR COMPANY COLOURS
(from 2 units purchased).
For more information on the RAL colours AVAILABLE:, contact us on 04 77 92 25 81.
SECURE
Central locking of all the drawers at the same time. Lock with folding key (supplied with 2 numbered security keys).
11
ROLLER CABINETS
www.sam.eu
Height: 940 mm. Width: 680 mm. Depth: 475 mm.
WORKSHOP
ROLLING CABINET
SERVI-R40Z
Allows the transformation of the chest (SERVIR40) in mobile chest. The kit consists of a handle
and 4 wheels Ø 125 mm.
2 fixed, 2 castors, one with brake.
SECURITY
Drawers with automatic locking
system.
5 DRAWERS ROLLER CABINET
T
WITH ALUMINIUM TRAY
SERVI-530
Weight: 52 kg.
5 drawers: 1 x 50 mm, 2 x 100 mm,
1 x 150 mm and 1 x 200 mm.
6 DRAWERS ROLLER CABINET
WITH ALUMINIUM TRAY
SERVI-630
Weight 55 kg.
6 drawers: 2 x 50 mm, 3 x 100 mm,
1 x 200 mm.
PRICE
DOWN
PRICE
DOWN
TWO-SIDED ROLLER CABINET
TROLLEY FOR STORING CONSUMABLES
RV5Z
CMRC-1Z
Height: 760 mm. Width: 640 mm. Depth: 440 mm
Drawers open from both sides for greater accessibility.
5 drawers. Key locking.
Weight: 41.2 kg.
Height: 1045 mm. Width: 1025 mm. Depth: 520 mm
For your jerry cans, rags, spray bottles, …
W
E
N
12
W
E
N
STORAGE
INDISPENSAM
WORKBENCH
2000-PM
COMPACT WALL
STORAGE CABINET*
L:
2000
mm
Two lengths of tray: 2000 mm (2000-PM). Height: 870 mm.
2664
Width 60.5 cm
Depth 23 cm
Height 90 cm
Panel perforation 10 x 10 mm
Lockable
Delivered without tools
METAL CABINET WITH
CURTAIN 1.50 M LONG*
METAL CABINET WITH
CURTAIN 2 M LONG*
2615
RESISTANCE
6 DRAWERS WORKBENCH
2006-PM
L:
The plate is in
Beech wood
laminate tray.
2000
mm
Two lengths of tray: 2000 mm. 6 drawers block (SERVI-B6).
The feet can be attached to the ground for stability of the workbench.
Height: 870 mm.
PRICE
DOWN
2620
Width 1.5 m
Depth 17 cm
Height 90 cm
Panel perforation 10
x 10 mm
Lockable
Delivered without
tools.
Width 2 m. Depth 17 cm
Height 90 cm
Panel perforation 10 x 10 mm
Lockable
Delivered without tools.
CONVENIENT
USABLE ON
WORKBENCH
L
CIA
E
SP
ION
CT
ELE
S
CONVENIENT
Cabinet base. Capacity: 15 modules.
See page 24/25.
12 DRAWERS WORKBENCH
METAL CABINET WITH CURTAIN*
2012-PMA
VERTICAL MAGNETIC BOWL
2990V
Magnetic bowl to allow to store the
removed parts during intervention.
L:
CONVENIENT
Cabinet base.
Capacity: 30 modules.
See page 24/25.
2000
mm
Worktop: 2000 mm. 2 blocks of 6 drawers (Use B6). Sold as a kit ready to
assemble. The worktop is predrilled for easy mounting. Wortop is beech wood
laminate made with a thickness of 40 mm and a depth of 700 mm. Seamless
multi-layer worktop, not
deformable, varnishes water resistant.
Height: 870 mm.
MAGNETIC STORAGE TRAY
2993Z
Maximum load: 3.5 kg.
Dimensions: 310 x 75 x 50 mm.
Hole diameter: 70mm.
CONVENIENT
Can also be screwed on or
sticks to metal surfaces.
* HOOKS ARE AVAILABLE ON REQUEST.
13
MOBILE STORAGE
www.sam.eu
S
TOOL BAG
BAG-1
SE PECI
LE AL
CT
IO
TOOL BAG
BAG-2
N
Dimensions :
420 x 250 x 270 mm.
Dimensions : 550 x 250 x 300.
CONVENIENT
SUPPLIED WITH 2 PLASTIC
STORAGE BOXES FOR SMALL
PARTS.
SMART
YOU CAN FIND SOME SETS IN PAGE 19.
TOOLS HOLDER BELT
LEATHER TOOL HOLDER
422-T
422-C
Reinforced padded
belt for comfort.
To carry your
tools with you
everywhere.
Sturdy canvas:
600 denier.
Compartments for
different size tools:
hammers, pliers,
screwdrivers,
wrenches ...
Large pockets
Dimensions:
24 x 27.5 cm.
1 box and 4 compartment
Joint by reinforced galvanized
links which enable a maximal
opening. Folding carrying
handles. Closing by padlock
(non-delivered).
TEXTILE BAG
WITH TROLLEY
BAG-3
Equipped with 2 tool holders panels
Large pocket on the front with zipper.
Extendable handle.
Trolley: height 970 mm.
Overall dimensions of the bag:
440 x 380 x 140 mm.
BACKPACK
BAG-5
Adjustable straps and belt.
2 side pockets, one with closure.
1 large front pocket with zipper and
internal storage (pens, etc ...).
Possibility to fix three tools holders
panels.
1 mobile phone pocket.
WATERPROOF
Sturdy canvas:
600 denier
TEXTILE BAG
WITH TROLLEY
WATERPROOF
Sturdy canvas:
600 denier
BAG-7
Allows to transport tools and a laptop. Equipped with two tool holders panels
1 large pocket and several small internal pockets. 1 large pocket.
The two large pockets feature a zipper pocket for storage of the laptop.
2 side pockets. Extendable handle. Trolley: height 970 mm.
THE IDEAL COMPROMISE
to store your tools and
personal belongings.
14
INDISPENSAM
26" TOOLBOX
ORGANISER STORAGE BOX FOR SMALL HARDWARE OF VARIOUS
ACCESSORIES
AVAILABLE:
AVAILABLE:
APRIL
BAOPRO-2Z
Length: 67 mm. Width: 31 mm. Height: 26 mm.
2 storage boxes in 1!
On the top, an entirely detachable 24 inch storage box that can be
used as a standalone unit with removable dividers or that can be
locked onto the lower part.
CAOPRO-26Z
MARCH
PVC toolbox with 3 compartments in the lid for
small items. Reinforced polypropylene shell.
Removable tray.
Padlockable metal fasteners.
Metal wire hinges.
Length: 547 mm. Width 271 mm.
Height: 278 mm.
W
NE
ROBUST
Metal wire hinges.
LONG SERVICE
LIFE
Protective bumpers at
the corners
W
E
N
12" TOOLBOX
SET OF 3 PVC TOOLBOXES
16" TOOLBOX
AVAILABLE:
CAO-12Z
MARCH
COMFORTABLE
Ergonomic aluminium
handle.
AVAILABLE:
MARCH
CAO-16Z
CAO-PACKZ
AVAILABLE:
PVC toolbox with storage compartments in the
lid for small items. Removable tray.
Length: 312 mm. Width 167 mm.
Height: 130 mm.
MARCH
19" TOOLBOX
AVAILABLE:
CAO-19Z
MARCH
PVC toolbox with storage compartments in the
lid for small items. Removable tray.
Strong metal fasteners.
Length: 493 mm. Width: 256 mm.
Height: 248 mm.
NE
W
Buy 2, get
the 3rd free.
CAO-16Z = CAO-12Z FREE
+ CAO-19Z
W
E
N
W
NE
15
MOBILE STORAGE
POLYPROPYLENE
BAG WITH TROLLEY
TVR-T
Reinforced shell resistant up to a
pressure of 90 kg. Opening with stops
at 90 °. Reinforced hinges. Reinforced
handle. Double lock. Label holder
included.
www.sam.eu
STORAGE BOX
ABS TRANSPORTABLE 117 MM
STORAGE BOX
FOR SMALL PARTS
BOX-3XZ
BR-1Z
17 compartments removable. Reinforced
lid unbreakable. Safety closure preventing
the opening of the compartments during
transportation Strap for transport.
Overall Dimensions: H 350 mm x
W 300 mm x D 145 mm.
REINFORCED
LID UNBREAKABLE
Dimensions : L 442 x H 357 x D 117 mm.
Capacity: 18 L.
STORAGE BOX
ABS TRANSPORTABLE 151 MM
PRACTICAL
BOX-4XZ
Dimensions : L 442 x H 357 x D 151 mm.
Capacity: 23 L.
MODULAR AT WILL
Easily adapted and fitted
to other boxes
thanks to side clips.
STORAGE BOX
ABS TRANSPORTABLE 253 MM
BOX-5XZ
Dimensions : L 442 x H 357 x D 253mm.
Capacity: 40 L.
SITE CHEST
SAM-517-PCV
Reinforced structure
Carrying handles
Removable tray : 650 x 335 x 350 mm
Possible closure by padlock (nonsupplied)
Dimensions : 800 x 350 x 350 mm.
ROBUST
Lid can withstand a load
of up to 100 kg.
Load capacity per box:
up to 25 kg.
5-TRAY METAL TOOL BOX
SAM-590-PBVZ
SEALED
BOX-5XZ
Strength steel plate.
1 box and 4 compartment.
Joint by reinforced galvanized links
which enable a maximal opening.
Folding carrying handles.
Closing by padlock (non-delivered).
BOX-4XZ
BOX-3XZ
BIMATERIAL
TOOL BOX
Folding Handles.
Closed by padlocks (not supplied).
Nylon covers. 4 plastic feet.
Dimensions : 540 x 100 x 200 mm.
2 small boxes : 540 x 50 x 100 mm.
Supports 30 / 40 kgs.
BOX-1Z
SHORT SERIES
5 TRAY TOOLBOX
BOX-2Z
RESISTANCE
Fiberglass cover with
a rib structure for high
strength and
impact resistance.
COMFORTABLE
The corners are
protected with pads to
avoid scratching
delicate work plans.
STRONG
Ribbed galvanized rods
to increase the lifetime
of the box in response to
repeated opening
and closing.
Dimensions: 470 x 200 x 200.
L
CIA
E
SP
16
ION
S
CT
ELE
TOOL SETS
INDISPENSAM
145 TOOLS “SEDUCTION“ CASE
CONVENIENT
Contains sam’s best
sellers.
CP-146Z
2 combination wrenches: 8 - 9 - 10
- 11 - 12 - 13 - 14 -15 - 16 17 - 18 - 19 mm - 13 screwdrivers
: Slotted blade, Phillips®,Pozidriv®,
Torx® - 4 micro-mechanical
screwdrivers - 30 bits : Slotted blade,
Phillips®, Pozidriv®, hexagonal,
Torx®, Résistorx® - 4 pliers - 1 metal
saw - 9 hexagonal head keys - 1 level
gauge - 1 rule - 1 penlight - 1 cutter
- 1 testing screwdriver - 19 metal
drilling bits - 1 adjustable wrench - 1
nippers - 17 sockets and accessories
1/2” : 10 to 24 mm - 23 sockets and
accessories 1/4” : 3.2 to 14 mm
- 1 hammer and 4 punching tools
- 1 short tape measure.
120
tooth
ratchet
ALUMINIUM CASE
TVJ-1Z
L
CIA
ON
TI
LEC
E
SP
SE
80 TOOLS
WITH STORAGE BOX
69 TOOLS
SEDUCTION CASE
CP-80BOXZ
CP-74Z
9 combination wrenches: 10 - 11 - 12 - 13 - 14 - 16 - 17 - 19 - 22 mm - 11 sockets
(1/4): 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 13 mm - 1 extension with dual
material handle (1/4”) - 150 mm 1/4” extension - 1 bimaterial ratchet (1/4”) - 1
bit holder socket - 10 1/2” sockets: 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24
mm - 1 extension 1/2”: S-219 mm - 1 bimaterial ratchet (1/2”) ”PUSH” - 1
bimaterial multigrip pliers - 1 bimaterial universal pliers - 1 hammer - 30 bits:
Slotted blade, Phillips®, Pozidriv®, 6 points, Torx®, Résistorx®
9 extra thin combination wrenches: 10 - 11 - 12 - 13 - 14 - 16 - 17 - 19
- 22 mm. - 11 x 1/4” sockets: 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 13 mm. - 1 x 1/4” bimaterial drive spinner. - 1 x 1/4” extension of 50
mm. - 1 x 1/4” bimaterial ratchet. - 1 x 1/4” bit-holder socket. - 10 x
1/2” sockets: 14 - 15 - 16 - 17 - 18 - 19 - 21 -22 -23 -24 mm. - 1 x 1/2”
extension: 125 mm. - 1 x 1/2” bimaterial push ratchet, 120 teeth. - 1
bimaterial multigrip pliers. -1 bimaterial universal pliers with spring. 1 SAMSOPLUS® hammer. - 30 bits: slotted, Phillips®, Pozidriv®, 6 hex,
Torx®, Résistorx®. - 1 x 8’’ adjustable wrench.
- 1 rack of 9 male hex keys.
- 1 short tape measure of 3 m.
120
tooth
ratchet
120
tooth
ratchet
17
TOOL SETS
www.sam.eu
BI-MATERIAL TOOLBOX
103 TOOLS FOR ELECTRICIANS
26" TOOLBOX WITH
60 TOOLS
AVAILABLE:
CP-103BOXZ
-6 open wrenches.
-9 hex keys with spherical heads
from 1.5 to 10 mm.
-1 chrome-plated adjustable
wrench.
-7 pairs of pliers: multigrip, halfround straight nose, universal, flat
nose, cutting, bent half-round nose,
diagonal cutting.
-1 x large jaw lock grip pliers 1 x
wire strippers.
-2 SAMSOPLUS® hammers, 3 short
drift punches, 1 centre punch, 1 flat
chisel, 1 constant profile chisel.
-1 notched cable cutter.
-1 set of 9 combination wrenches
from 8 to 19 mm.
-1 SAMSOCUT lever tensioned
hacksaw.
-50 HSS bi-metal OPTICUT hacksaw
blades.
-1 universal tester, 1 flexible rule
200 mm, 1 vernier caliper 1/50 mm,
1 flexible claw pick up tool.
CP-CAOPROZ
-1 electrician’s sheath stripper, 1 x
electrician’s scissors.
-1 short tape measure, 1 soldering
iron 30 to 55 W, 1 tri-metal weld
reel.
-1 x crimping pliers, car
maintenance model,1 cable
stripper.
-8 insulated screwdrivers 1000 V:
4 x electrician’s slotted: 3.5x100 4x100 - 5.5x125 - 6.5x150.
-2 x Pozidriv®: 1x125 - 2x150.
-2 x Phillips®: 1x125 - 2x150.
-1 screwholding screwdriver for
Phillips® tip.
-1 offset screwdriver for slotted
screws.
-1 square tip
-1 set of 26 1/4" 26 tools (mm).
-1 bi-material toolbox BOX-1Z
BI-MATERIAL
TOOLBOX WITH 50 TOOLS
18
-1 x multigrip pliers, 1 x spring loaded universal pliers, 1 x spring loaded
diagonal cutting pliers.
-1 hammer, 2 centre punches, 2 drift punches.
-14 combination wrenches from 6 to 24 mm, 1 hacksaw, 1 tape measure.
-3 electrician’s slotted screwdrivers: 3.5 x 75 - 4 x 100 - 5.5 x 100.
-2 mechanic’s slotted screwdrivers: 6.5 x 100 - 8 x 200.
-3 Phillips® screwdrivers: No. 0 x 75 - 1 x 100 - 2 x 100.
-1 insulated slotted screwdriver 4 x 100.
-1 set of 27 1/2» sockets and accessories
-1 26’’ toolbox CAOPRO-26Z.
120
tooth
ratchet
BASIC TOOL BOX
CP-50BOZ
Combination wrenches from 7 to 19,
1 set of 4 pliers,
1 SAMSOPLUS hammer,
4 slotted screwdrivers,
4 Phillips screwdrivers,
1 rack with hexagonal keys and Torx
keys,
1 measure 3 meters,
sockets 1/2’’ from 10 to 24mm,
1 extension 125 mm,
1 drive sliding tee,
1 universal joint 1/2’’,
1 ratchet 1/2”,
1 cutter,
1 general-purpose shears,
1 metallic brush,
1 bi-material toolbox.
MARCH
CP-40Z
120
tooth
ratchet
W
E
N
Details:
-1 short tape measure 3 m.
-3 electrician’s slotted blade
screwdrivers: 4X100 - 5.5X100
- 6.5X100, 2 Phillips®
screwdrivers N°1 - N°2.
- 1 rack of 9 male
wrenches.
- 1 multigrip pliers, 1
universal pliers, 1 cutting
pliers.
- 6 combination wrenches: 8-1011-13-17-19 mm.
- 5 offset tubular socket wrenches:
8-10-11-13-17mm.
- 1 riveting hammer 32 mm, 1 chisel, 1 set
of 5 drift punches.
- 1 adjustable wrench, 1 mechanic’s end cutting
nippers,
1 hacksaw frame, 1 cutter.
INDISPENSAM
66 TOOLS TROLLEY BAG
33 TOOLS SET
CP-66BAZ
CP-33BAZ
Combination wrenches: 7-8-9-10-1112-13-16-17-18-19
1 multigrip pliers,
clamp a straight beak,
1 flat nose pliers,
1 diagonal cutters,
1 tri-material hammer,
5 slotted screwdrivers,
4 Phillips screwdrivers,
1 set of hexagonal keys swith
spherical head,
1 set of Tork keys,
1 cutter,
1 general-purpose shears,
1 rule,
1 textile storage box.
1 multigrip pliers, 1 universal pliers
with spring, 1 diagonal cutting
pliers with spring.
- 8 extra thin combination wrenches:
8 - 10 - 11 - 13 - 16 - 17 - 18 - 19.
- 1 SAMSOPLUS hammer, 30 mm.
- 1 x 8’’ adjustable wrench.
- 1 rack of 9 male keys
with spherical head.
- 1 short tape measure, 3 m.
- 2 slotted screwdrivers, 2 Phillips®
screwdrivers.
- 1 box of 39 tools with built-in
LED light 73-R39Z (see close-up in
page 27).
CONVENIENT
THE IDEAL COMPROMISE to
store your tools and personal
belongings (laptop, tablet and
other office accessories).).
IAL
C
PE
S
ION
CT
ELE
S
TEXTILE TROLLEY CASE
WITH 145 TOOLS
1
CP-145BAZ
Combination wrenches from 8 to 19,
1 saw,
2 drive sliding tee 1/2’’and 1’’,
2 extensions,
1 extensinon,
2 universal joints,
1 ratchet 1/4’’and 1/2’’,
1/4” sockets from 3.2 to 14 and 1/2”
sockets from 10 to 21mm,
1 adjustable wrench,
1 scribe,
1 level,
1 set of hexagonal keys,
1 set of 4 pliers,
5 slotted screwdrivers,
5 Torx® screwdrivers,
3 Phillips screwdriver,
1 screwdriver tester,
4 precision screwdrivers,
2 chisels,
2 drift punches,
1 measurement 2 meters,
120
1 rule,
1 light pen,
1 cutter,
1 hammer,
1 bit holder,
3 sets of bits,
19 metal drills,
1 mechanic end nippers
tooth
ratchet
2
3
4
19
TOOL
www.sam.eu
SETS
PRACTICAL
+ 30% extra storage space!
14 MODULE SET WITH EXTRA-WIDE 6-DRAWER ROLLER
CABINET 202 TOOLS in ABS modules
CPP-XL
3 COMPLETE DRAWERS
C
O
M
P
O
S
I
T
I
O
N
- Extra-wide 6-drawer roller cabinet with «TOP» system (partia
(partially
opening drawers) SERVI-640BXLZ
1
- 45 hex keys on a rack.
- 1 automatic cutter, 1 padlock, 1 short tape measure 3 m.
- 1 box of 5 spiral screw extractors, 1 pen torch.
- 1 x 1/2“- 1/4” adapter, 1 x10” adjustable wrench.
2
- 1 hacksaw, 10 saw blades, 1 tape measure 3 m.
- 1 scriber, 1 x ruler 300 mm
3
-7 insulated screwdrivers 1000 V, slotted and Phillips®.
4
- 7 slotted and Phillips®. screwdrivers
5
- 7 Torx® screwdrivers, from T10 to T40.
6
- 6 socket spanners from 21 to 30 mm.
7
- 1 extra flat chisel, 1 centre punch, 1 precision cape chisel.
1 SAMSOPLUS® hammer 32 mm, 1 mallet with 2 tips.
5 drift punches: ø 2.4 to 8.9 mm.
8
- 4 pairs of circlip pliers.
9
- 4 pairs of pliers.
10
- 10 box wrenches from 8 to 19 mm.
11
- 6 extra-thin combination wrenches from 22 to 32 mm.
SAFE
125 mm wheels
for easier movement.
With «TOP» system (partially
opening drawers).
To avoid any risk of the cabinet tipping over, the
roller cabinet is fitted with a single drawer opening
system. As soon as one drawer is open, the antitipping system is active.
2
5
1
9
4
12
- 12 extra-thin combination wrenches from 7 to 19 mm.
13
- 1 1/4” bit-holder socket, 1 1/2” ratchet, 1 1/4’’ screwdriver bit
holder, bit holder, 1 ratchet 1/2”, 2 1/2” extensions , 1 1/2” universal
joint, 22 six point sockets 1/2” six point sockets: 8 to 32 mm.
14
20
- 1 1/4”push ratchet, 1 drive spinner handle, 1 1/4” universal joint,
1 1/4” sliding T-handle, 2 1/4” extensions, 10 1/4» sockets from 5.5
to 14 mm, 7 screwdriver bits Phillips®, 1 rack with 9 hex keys from
1.5 to 10 mm.
14
8
3
7
13
6
12
11
10
INDISPENSAM
AVAILABLE:
APRIL
SET OF 135 TOOLS WITH NEW
GENERATION 5-DRAWER ROLLER
CABINET WITH FOAM INSERTS
415-135MZ
415 5-drawer roller cabinet + 135 tools in 3 tool trays with foam inserts:
5 slotted screwdrivers, 2 Phillips® screwdrivers, 7 Torx® screwdrivers,
1 flat chisel, 1 centre punch, 1 cape chisel, 1 SAMSOPLUS® hammer,
1 mallet, 5 drift punches from ø 2.4 to 8.9 mm, 10 hollow offset socket
wrenches from 8 to 19 mm, 1 x lock grip pliers, 1 x multigrip pliers, 1 x
universal pliers, 1 x cutting pliers.
- 1 1/2” pass through ratchet, 1 1/2" extension 75 mm, 2 adapters
1/2" and 3/8", 10 1/2” pass through sockets from 10 to 19 mm, 1 1/4"
pass through ratchet, 1 1/4” extension, 1 1/4” adapter, 10 1/4" pass
through sockets from 4 to 13 mm, 1 1/4” adapter, set of 30 Phillips®,
hex, Pozidriv®, Torx®, Resistorx® bits, set of 18 extra-thin combination
wrenches from 7 to 32 mm, 1 short tape measure 2 m, 1 rack of 9 hex keys
with spherical heads, 1 10" adjustable wrench , 1 vernier caliper 1/20, 1 bimaterial cutter with retractable blade, 1 padlock, 1 set of feeler gauges, 1
scriber, 1 flexible rule 200 mm, 1 rack of 10 screwdriver bits + 1 bit holder.
SET OF 200 TOOLS WITH NEW
GENERATION 5-DRAWER ROLLER
CABINET WITH FOAM INSERTS
W
E
N
415-200MZ
415 5-drawer roller cabinet + 200 tools in 4 trays with form inserts: 45 hex,
Torx®, Resistorx® keys on a rack, 1 self-retracting cutter, 1 padlock, 1 short
tape measure, 1 box of 5 spiral screw extractors, 1 electrician’s knife, 1
pen torch, 7 Torx® screwdrivers, 1 box of screwdrivers: 4 slotted/Phillips®
reversible blades (8 tips) + 1 bi-material handle, 1 1/4’’bit-holder socket, set
of 10 socket spanners from 8 to 19 mm, 18 extra-thin combination wrenches
from 7 to 32 mm, 4 x circlip pliers, set of 5 pairs of pliers: lock grip, spring
loaded universal, spring loaded cutting, multigrip, spring loaded half-round
straight nose, 1 centre punch, 1 1/2” ratchet, 1 1/2” extension 75 mm, 1
adapter for 1/4" and 3/8" socket. - 10 1/2" pass through sockets from 10 to
19 mm, 1 1/4” ratchet, 1 1/4" extension 75 mm, 1 1/4" ratchet extension,
1 drive spinner handle, 1 radio screwdriver bit holder, 12 1/4" pass
through sockets from 4 to 13 mm, set of Phillips®, hex, Pozidriv®, Torx®,
Resitorx® bits, set of 5 drift punches from ø 2.4 to 8.9 mm, 1 adjustable
wrench: 10", set of 7 slotted and Phillips® screwdrivers, 2 SAMSOPLUS®
hammers, 1 mallet, 1 flat chisel, 1 precision cape chisel.
21
TOOL SETS
www.sam.eu
6 DRAWERS ROLLER CABINET WITH
ALUMINIUM TRAY + 200 TOOLS IN MODULES
CPP-200MZ
SERVI-640 7 drawers roller cabinet
CPP-200M1
9 hexagonal keys set from from 1.5 to
10mm + 9 Torx® Key from 8 to
40 + 9 hexagonal keys with spherical
head keys + 9 long hexagonal
keys from 1.5 to 10mm, 1 cutter
with auto retractable blade, padlock,
3m short measure, 1 puller set,
electrician’s knife, pen light, adjustable
wrench, 7 Torx® screwdrivers, 1 set of
4 screwdriver blades with handle.
CPP-200M2
10 socket wrenches set: 8-10-11-1213 -14-16-17-18-19, 18 combination
wrenches set: 7-8-10-11-12-13-14-15-
22
PRICE
DOWN
16-17-18-19-2224-27-29-30-32, 4 circlip pliers set
CPP-200M3
4 pliers set: Lock grip pliers, multigrip
pliers, combination pliers,
cutting pliers, 1 punch, 1/2” pass
trough sockets set and accessories:
1/2 ratchet , 1/2” extension 75mm,
1/2” ratchet adapter, 1/2” pass trough
sockets : 10-11-12-13 - 14-15-16-1718-19, 1/4” pass through sockets and
accessories: 1/4” ratchet,
1/4” extension 75mm, 1/4” ratchet
adapter, drive spinner, 1/4”
screwdriver sockets, 1/4” pass trough
sockets: 4-5-5,5-6-7 - 8-9-10-1112-13, Phillips® bits set, hexagon,
Pozidriv®, Torx®, Resitorx®, 5 drift
punches set.
CPP-200M4
7 screwdrivers set, 2 trimaterial
hammers, 1 hammer, 1 flat chisel, a
precision cape chisel.
5 DRAWERS ROLLER CABINET WITH
ALUMINIUM TRAY + 135 TOOLS IN MODULES
CPP-135MZ
SERVI-540 5 drawers roller cabinet
CPP-135M1
7 slot screwdriver, 7 Torx®
screwdriver, 1 flat chisel, a punch, a
cape chisel, a trimaterial hammer, 1
mallet, 5 drift punches.
CPP-135M2
10 socket wrenches: 8-10-11-12-1314-16-17-18-19, 1 lock grip pliers,
multigrip pliers, combination pliers,
cutting pliers, 1/2” pass through
ratchet, 1/2” 75mm extension 1/2”
and 3/8” adapter, 1/2” pass trough
sockets: 10-11-12-13-14 - 15-1617-18-19, 1/4” pass through ratchet,
1/4” 75mm extension 1/4” adapter,
1/4” pass through sockets 1/4”
sleeper: 4-5-5,5-6-7-8-9 - 10-1112-13, 1/4” bits adapter, Phillips®
bits set, hexagon, Pozidriv”, Torx”,
resitorx”, 1/4” screwdriver bits
CONVENIENT
WASHABLE
With the bi-colour foams and precision cutting to the shape of
the tool, you can check all your tools are there at a glimpse.
Foam washable at
60°C.
PRICE
DOWN
CPP-135M3 :
Combination wrenches set : 7-8-1011-12-13-14-15-16-17-18-19-2224-27-29-30-32, 2m short measure,
hexagonal keys with spherical head,
1 adjustable wrench, 1/20th vernier
caliper, bimaterial cutter with
retractable blade,
padlock, feeler gauge, carbide
scriber, rule.
INDISPENSAM
6 DRAWERS ROLLER
CABINET WITH
ALUMINIUM TRAY +
200 TOOLS IN MODULES
PRICE
DOWN
CPP-200SV
1 roller cabinet SERVI-630
3 electrician’s Slotted screwdrivers :
C
O
M
P
O
S
I
T
I
O
N
3
7
3 x 100 -4 x 100 - 5,5 x 150
2 mechanic’s Slotted screwdrivers :
6,5 x 150 -8 x 150
2 Phillips® screwdrivers : N°1 - N°2
7 Torx® screwdrivers :
10 x 80 - 15 x 80 - 20 x 100 25 x 100 - 27 x 115 - 30 x 115 - 40 x
130
10 hollow offset tubular socket
1
wrenches 8 to 19 mm
12 combination wrenches : 7 to 19
mm
6 combination wrenches : 22 to 32 mm
9 hexagonal keys set :1,5 to 10 mm
9 hexagonal keys set : 8 to 40 mm
1 rack with 9 spherical hexagonal keys
male wrenches : 1,5 mm to 10 mm
1 rack with 9 offset male Resistorx®
wrenches :
8 to 40 mm
9 long hexagonal keys: 1,5 to 10 mm
1 self-retracting blade cutter
1 padlock
1x3m short tape measure
1 set of 15 bits + 1x 1/4” bit holder
1 set of 5 helical pullers
1 pen light
1 adaptator 1/4” - 1/4”
1 monkey wrench. L = 238 mm
1 high capacity lock grip plier.
L = 220 mm
1 bimaterial multigrip plier. L = 250 mm
1 universal plier. L = 165 mm
1 diagonal cutting plier. L = 165 mm
1 electrician straight half-round nose.
L = 160 mm
1 chisel
1 punch : ø 3 mm
6
11
2
10
5
9
4
8
PRICE
DOWN
5 DRAWERS ROLLER
CABINET WITH
ALUMINIUM TRAY + 135
TOOLS IN MODULES
CPP-135SV
1 roller cabinet SERVI-530
- 3 electrician’s Slotted screwdrivers
C
3
6
2
5
8
1
O
M
P
O
S
I
T
I
O
N
3x100 – 4x100 – 5,5x150 - 2 mechanic’s Slotted screwdrivers S1:6,5 x 150 – 8 x 150 - 2
Phillips® screwdrivers S1: N°1 – N°2 - 7 Torx® screwdrivers : 10x80 - 15x80 - 20x100 25x100 - 27x115 - 30x115 - 40x130 - 10 hollow offset tubular socket wrenches: 8 to 19 mm
- 12 combination wrenches : 7 to 19 mm - 6 combination wrenches : 22 to 32 mm
- 1 lock grip pliers L = 220 mm - 1 bimaterial multigrip pliers. L = 250 mm - 1 universal
pliers L = 165 mm - 1 diagonal cutter pliers 180 mm - 1 chisel, 1 punch : ø 3 mm
- 1 precision cape chisels - 1 x 2-bit soft-face hammer, - 1 riveting hammer Samsoplus® :
32 mm - 5 drift punches : ø 2,4 - 3,4 - 4,9 - 6,9 - 8,9 mm - 2 x ratchets : 1/2” - 1/4”
- 2 extensions : 1/2” - 1/4” - 3 ratchet adapters 1/4” - 11 pass
through sockets for smallsize ratchet : 4 to 13 mm - 10
pass through sockets for largesize ratchet : 10 to 19 mm
- 1 adapter 1/4” - 1 extension 1/4” with end-piece
9
holder socket - Bits : slotted blade, Phillips®, Torx®,
6 point, Pozidriv®, Résistorx® - 1x3m short tape measure,
- 9 long hexagonal keys with spherical head : 1,5 mm to
10 mm, - 1 adjustable wrench, - 1 vernier gauge 1/20ème,
- 1 retractable knif, - 1 padlock, - 1 feeler gauge, - 1 scriber,
- 1 flexible rule.
4
7
23
TOOL MODULES
SAM MODULES
WITH FOAM INSERTS:
www.sam.eu
7 SCREWDRIVER MODULE
WITH FOAM INSERT
T-PZJ7MMZ
34 SOCKETS
AND ACCESSORIES
MODULE 1/4”
73-R34MMZ
12 RATCHET COMBINATION
WRENCHES
IN FOAM MODULE
50C-J12MMZ
SEE WHICH TOOLS ARE
MISSING AT A GLANCE
THANKS TO THE TWOCOLOURED FOAM.
3x100 - 4x150 - 5,5x150.
6,5x150 - 8x150.
1x100 - 2x125.
7 SLOT AND PHILLIPS®
SCREWDRIVERS MODULE
4 PLIERS
MODULE
P21-J4MZ
T-PJ7MMZ
1 ratchet 1/4”, 6-point sockets 1/4”
from 5.5 to 14,
3 extensions, 1 sliding handle, 1
universal joint
1 hafted handle, 1 socket screwdriver
9 hexagonal keys,
7 screwdriver Phillips,
Pozi, slotted bits.
7-8-9-10-11-12-13-14-16-17-1819 mm.
12 COMBINATION
WRENCHES
IN FOAM MODULE
4 CIRCLIP PLIERS
IN FOAM MODULE
50N-J12MMZ
190-J4MMZ
ERGONOMIC
Lock grip pliers
Multigrip pliers
Combination pliers
Cutting pliers
7 SCREWDRIVERS
TORX® MODULE
T-XJ7MMZ
3x100 4x150 5,5x150.
6,5x150 8x150.
1x100 2x125.
27 SOCKETS AND
ACCESSORIES
MODULE 1/2”
75-SH27MMZ
8-9-10-11-12-13-14-16-17-19-2122 mm.
190-17A Internal circlip pliers 19-60,
191-17A Angled circlip pliers 19-60,
195-17A Circlip pliers 19-60,
196-17A Circlip pliers 19-60,
Foam module.
10 ANGLED OPEN
-SOCKET WRENCHES
MODULE
10 STRIKKING TOOLS
IN FOAM MODULE
94-SJ10MMZ
M1-10MMZ
120
tooth
ratchet
10x80 - 15x80 - 20x100 - 25x100 27x115 - 30x115 - 40x130 .
24
1/2” ratchet , 2 extensions 125 and
250 mm, 1/2” universal joint
6 point sockets: 8-9-10-11-12-13-1415-16-17-18-19-21-22-23-24-25-2729-30-32.
8 9 10 11 12 13 14 17 19 21 mm.
Extra flat chisel, punch, precision
cape chisel, trimaterial hammer 2
tips hammer, 5 drift punches.
INDISPENSAM
7 SCREW DRIVERS
MODULE
T-1MZ
3-4-5.5-6.5-8 mm.
n°1, n°2.
12 COMBINATION WRENCHES
IN FOAM MODULE
50N-J12MZ
7 TORX®
SCREWDRIVERS
MODULE
T-3MZ
T10-T15-T20-T25-T27-T30-T40.
6 WRENCHES
IN ABS MODULE
50N-J6MZ
6 BIG DIMENSION
ANGLED OPENSOCKET
WRENCHES MODULE
94-SJ6MZ
21-22-23-24-27-30 mm.
12 RATCHET COMBINATION
WRENCHES MODULE
50C-J12MZ
10 ANGLED OPEN
-SOCKET WRENCHES
MODULE
94-SJ10MZ
8-10-11-12-13-14-16-17-18-19 mm.
IMPACT SCEWDRIVERS
MODULE
270A-J20MZ
7 8 10 11 12 13 14 15 16 17 18 19.
22 24 27 29 30 32.
7-8-9-10-11-12-13-14-16-17-1819 mm.
2-3 Straight bits. 2-3 Pozidriv® bits.
2-3 Phillips® bits. 5-6-8-10 Hexagon
bits. 20-25-27-30-40-45-50-55 Torx®
bits.
IMPACT SOCKETS
MODULE
1/4” SOCKETS AND
ACCESSORIES MODULE
1/2” SOCKETS AND
ACCESSORIES MODULE
1/2” AND 1/4” PASS
TROUGH SOCKETS +
ACCESSORIES MODULE
NSJ-15MZ
Extension 125mm
+ sockets 10-11-12-13-14-15-16-1718-19-21-22-23-24.
10 IMPACT TOOLS
MODULE
M1-10MZ
Extra flat chisel, punch, precision
cape chisel,
trimaterial hammer
2 tips hammer, 5 drift punches.
73-R1MZ
75-SH1MZ
1/4” push ratchet, Drive spinner,
1/4” universal joint, 1/4” drive sliding
tee, 1 short and long extension. 1/4”
sockets: 5,5-6-7-8-9-10-11-12-13-14
Slotted screwdriver bits 4.5 - 6.5 8mm. Phillips® screwdriver bits No.
1-2. Pozidriv® screwdriver bits No.
1-2. 9 hexagonal keys set from 1.5 to
10mm. 1/4 bit sockets RD-1.
1/2” ratchet , 2 extensions 125 and
250mm, 1/2” universal joint
6 point sockets: 8-9-10-11-12-13-1415-16-17-18-19-21-22-23-24-25-2729-30-32.
5 FILES MODULE
4 PLIERS MODULE
LPJ-1MZ
Flat.
Half-round.
Square.
Three-square.
Round
120
tooth
ratchet
P13-J4MZ
Lock grip pliers
Multigrip pliers
Combination pliers
Cutting pliers
M-61Z
1/2” bimaterial pass through ratchet
- Extension 1 / 2 75 mm. Ratchet
adapter 1/2” and 3/8”. 6 point sockets
1 / 2 : 10-11-12-13-14-15 -16-17-1819. 1/4” pass through ratchet with 1/4
extension. Adapter for ratchet 1/4”.
6 point 1/4” socket : 4-5-5.5-6-7-8-910-11-12-13mm. 1/4” screwdriver bit
adapter. 1/4” bits set slotted Torx® - Phillips® drive spinner. 1/4”
screwdriver sockets.
4 CIRCLIP PLIERS
MODULE
190-J4MZ
Circlip pliers for inside circlip 19-60
Circlip pliers for inside circlip 90° tip
19-60
Circlip pliers for outside circlip 19-60
Circlip pliers for outside
Circlip 90° tip 19-60.
25
www.sam.eu
TOOL MODULES
Choose the specific tool to every job.
SQUARE DRIVE
SIZE
PRODUCT
REFERENCE
PAGE
STANDARD USE
6 POINTS / 12 POINTS
1/4” SQUARE DRIVE
73-R45Z
73-R39Z
73-R33Z
73-R17Z
33
32
33
33
1/2” SQUARE DRIVE
{ 75-RS1Z
75-RS2Z
36
36
98
98
98
98
98
98
35
35
35
28
28
29
28
28
29
29
37
37
29
37
1/4 et 1/2
DOUCHOTORXZ
DOUCHORTORXZ
CP-NSCJ
CP-NSTJ
72-NS19
1/2 et 3/8 74NJ-J10
CP-16Z
CP-61Z
CP-77Z
75-SH32Z
75-SH28Z
75-S29Z
75-SAH27Z
75-SH23Z
75-SH21Z
SC-J9BOXZ
SC-J8R
STJ-8R
CD-STX1Z
STX-J7R
3/4” SQUARE DRIVE
26
78-CH16Z
36
COMPACT
ACCESSIBILITY
PASS THROUGH
SOCKETS
POWERED
TIGHTENING
IMPACT SOCKETS
SOCKETS
SCREWDRIVERSTORX/HEX
TORX / 6 POINTS
INDISPENSAM
RATCHETS
With SAM, choose the right product for every job.
RFID RATCHET
SQUARE DRIVE
SIZE
PRODUCT
REFERENCE
PAGE
RFID RATCHET
31
1/4” SQUARE DRIVE
R-150BZ
RA-151BZ
R-157BZ
R-152BZ
COMPOCLIC-1Z
34
34
47
35
34
3/8” SQUARE DRIVE
J-150AZ
J-159AZ
COMPOCLIC-2Z
37
37
37
1/2” SQUARE DRIVE
S-159Z
SA-160AZ
S-158P
S-157B
S-155BZ
S-156BZ
S-154Z
CLICZEROZ
COMPOCLIC-3Z
30
30
30
83
35
35
30
31
31
3/4” SQUARE DRIVE
C-150Z
C-152Z
36
36
STANDARD USE
LIGHTWEIGHT
STRONG
PRODUCTIVITY
ACCESSIBILITY
CONNECTED
27
SOCKETS AND ACCESSORIES
-3 2
mm
1/2” SOCKETS AND ACCESSORIES
SET – 23 TOOLS
32 m m
8
8
SET OF 1/2" SOCKETS AND ACCESSORIES - 27 TOOLS
www.sam.eu
75-SAH27Z
-
75-SH23Z
-22 6 point sockets from 8 to 32 mm.
-1 1/2” ratchet with central reversing.
-2 1/2” straight extensions 210 and 215 mm.
-1 1/2” sliding T-handle.
-1 1/2” universal joint .
Satin finish.
Construction ratchet square 1/2”,
1 extension 1/2” 125 mm
1 extension 1/2” 250 mm,
1 unirversal joint 1/2”,
19 sockets 1/2” : 8-9-10-11-12-13-1415-16-17-18-19-21-22-23-2427-30-32.
L
CIA
ON
TI
LEC
E
SP
SE
SET OF 1/2" SOCKETS AND ACCESSORIES - 32 TOOLS
mm
1
-3 2
75-SH28Z
Ratchet 1/2”
Sockets 1 / 2 of 8-9-10-11-12-13-1415-16-17-18-19-21-22-23-24-26-2728-29-30-32.
2 extensions.
120
tooth
ratchet
28
75-SH32Z
ACCESSIBILITY
120 tooth ratchet, 3° swing
to facilitate access in confined
spaces.
-21 6 point sockets from 10 to 32 mm.
-1 1/2” ratchet with central reversing.
-2 1/2” straight extensions 210 et 215 mm.
-1 1/2” sliding T-bar.
-1 1/2” universal joint .
-1 1/2” bit-holder socket .
-5 5/16” hex bits.
32 m
0-
m
8
1/2” SOCKETS
AND ACCESSORIES SET
INDISPENSAM
-3
m
SET OF 6 POINT SOCKETS AND ACCESSORIES AND 1/2”
ACCESSORIES - 21 TOOLS
2m
8
8
SET OF 1/2" SOCKETS AND ACCESSORIES 29 TOOLS 12 POINT
4m
75-S29Z
AVAILABLE:
- 23 1/2” sockets from 8 to 34 mm.
- 2 extensions 130 mm - 250 mm. 1 sliding T-handle.
- 1 brace
- 1 universal joint.
- 1 1/2” ratchet.
APRIL
-3
m
75-SH21Z
AVAILABLE:
-17 1/2” sockets from 8 to 32 mm.
-1 1/2” universal joint, 2 extension 130 - 250 mm,
1 1/2” ratchet.
APRIL
W
E
N
EW
N
SET OF 9 1/2"TORX® BIT SOCKETS
mm
SC-J9BOXZ
CDSTX-1Z
Dimensions: 5 - 6 - 7 - 8 - 10 - 12 - 14 - 17- 19 mm.
2
-1 9
60 m
0-
m
5
SET OF 9 1/2” 6 POINT SCREWDRIVER BIT SOCKETS
Details: 20-25-27-30-40-45-50-55-60 mm.
AVAILABLE:
APRIL
NE
W
NE
W
29
SOCKETS AND ACCESSORIES
www.sam.eu
PUSH RATCHET 1/2”
WITH REVERSING LEVER
ACCESSIBILITY
120 tooth ratchet, 3° swing
to facilitate access in confined
spaces.
S-158P
Bright polished chrome finish.
Forged chrome vanadium steel.
120 teeth, 3 ° increment
Bi-material handle.
PUSH system: locking and
unlocking of the socket.
SECURITY
PERFORMANCE
IAL
C
PE
S
ION
CT
ELE
S
1/2” RATCHET WITH CENTRAL
REVERSING
1/2” RATCHET WITH CENTRAL
REVERSING
SA-160AZ
NF ISO
DIN
DIN
3122
3120
S-154Z
S-159Z
The twist reversing knob quick reversing with no
need for a ratchet movement.
1174-1
1/2” HINGED RATCHET
5°
72
tooth
ratchet
The twist reversing knob quick reversing with no
need for a ratchet movement.
NF ISO
DIN
DIN
1174-1
3122
3120
5°
72
tooth
ratchet
Central reversing.
Flex head to reach nuts that are difficult to
access.
NF ISO
DIN
DIN
1174-1
3122
3120
W
E
N
30
5°
72
tooth
ratchet
INDISPENSAM
RFID RATCHET
1/2” RATCHET WITH 0° RETURN ANGLE
SAM allows you to tack you tools thanks to a tool
locating system.
If you are interested in this offer, contact us on
+33 (0)4 77 921 335.
120
tooth
ratchet
AVAILABLE:
CLICZEROZ
CLIC-RFID
0° return angle
Recommended for places that are difficult to access.
APRIL
0°
NE
5°
W
SILENT
AVAILABLE:
PLEASE
ENQUIRE
CONSTRUCTION 1/2” RATCHET
S-157B
1/2” COMPOSITE RATCHET
COMPOCLIC-3Z
Does not scratch other materials.
72
tooth
ratchet
5°
PRACTICAL
Reversing lever for changing
the direction of rotation with
one hand.
72
tooth
ratchet
5°
LIGHTWEIGHT
Composite body, 15% lighter than a conventional ratchet.
RESISTANT
Protection of ratchet from water
and sand intrusion
31
SOCKETS
www.sam.eu
AND ACCESSORIES
COMPACT
Easy to carry in a pocket or
toolbox.
POCKET LIGHT SET 1/4” 39 SOCKETS
AND ACCESSORIES
INGENIOUS
INTEGRATION
of an LED lamp
(rechargeable battery)
in the box.
-1 4
mm
elle 1
ch
:1
E
5
73-R39Z
CONVENIENT
Support belt clip.
C
O
M
P
O
S
I
T
I
O
- 1 ratchet 1/4’’
- 1 fitted extension 1/4’’
- 1 extension 1/4’’ 50 mm
- 1 extension 100 mm
- 11 sockets 1/4’’: 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12
- 13 - 14 mm
32
N
- 1 universal Joint 1/4”
- 1 sliding handle 1/4’’
- 1 bit holder socket 1/4’’
- 3 bits for slotted haed 4.5-6.5 - 8 mm
- 3 bits for Phillips® head PH 1 - 2 - 3
- 3 bits for Pozidriv® head PZ 1 - 2 - 3
- 5 tips 6 Point 3 - 4 - 5 - 6 - 7 mm
- 7 bits for Resistorx® head 10-15 - 20 - 25-27 - 30
- 40
Package dimension: 148 x 89.5 x 46.7 mm.
INDISPENSAM
m
5,
-1
73-R17Z
5-
73-R33Z
- 12 sockets, 6 hex: 4-5-5.5-6-7-8-9-10-11-12-13-14 mm.
- 1 bimaterial ratchet
- 1 bimaterial jointed extension
- 2 extensions: 50 and 150 mm.
- 1 universal joint.
1/4” SOCKETS AND ACCESSORIES SET 45 TOOLS
14
3,
m
m
2-
73-R45Z
SET OF 1/4” SOCKETS AND ACCESSORIES 33 TOOLS
14 m
m
4
1/4” SOCKETS AND ACCESSORIES SET 17 TOOLS
4m
12 sockets, 6 hex: 3.2 - 4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm.
- 1 bimaterial ratchet
- 1 jointed extension
COMPACT
- 3 extensions: 50, 100 and 150 mm.
COMPACT BOX:
- 1 joint
Easy storage in top
- 1 sliding handle
compartments of SAM tool boxes.
- 1 bit-holder socket
Dimensions of box:
1/4” = 295 x 80 x 48 mm.
- 7 bits 6 hex: 2-3-4-5-6-7-8 mm.
®
5
- 7 Résistorx bits: 10-1 -20-25-27-30-40
- 4 slotted bits: 4.5-5.5-6.5-8 mm.
- 3 Phillips® bits: 1-2-3
- 3 Pozidriv® bits: 1-2-3
-10 6 point sockets from 5.5 to 14 mm.
-1 ratchet with central reversing.
-2 straight extensions 50 and 150 mm.
-1 sliding T-handle.
-1 drive spinner handle.
-1 universal joint.
-1 bit-holder socket
-16 hex, Phillips®, slotted and Torx®
screwdriver bits.
POCKET LIGHT SET OF 39 X 1/4” TOOLS,
SITE RATCHET VERSION
73-RC39Z
3x Slotted 4,5 - 6,5 - 8 mm.
- 3 x n°1 - 2 - 3.
- 3 x n°1 - 2 - 3.
- 5 x 3 - 4 - 5 - 6 - 7 mm.
- 7 x 10 - 15 - 20 - 25 - 27 - 30 - 40.
- 1 construction ratchet 1/4”
- 1 fitted extension 1/4”
- 1 extension 1/4” 50 mm
- 1 extension 100 mm
- 11 sockets 1/4” : 5 - 5,5
- 6 - 7 - 8 - 9 - 10 - 11 12 - 13 - 14 mm.
- 1 universal Joint 1/4”
- 1 sliding handle 1/4”
- 1 bit holder
socket 1/4”
- Package dimension:
148 x 89.5 x 46.7 mm.
PRACTICE:
- Integration of an LED lamp
(rechargeable battery)
in the box.
RESISTANT
protection of ratchet from water and
sand intrusion
IAL
C
PE
S
ION
CT
ELE
S
333
SOCKETS AND ACCESSORIES
www.sam.eu
CONSTRUCTION 1/4” RATCHET
1/4” COMPOSITE RATCHET
COMPOCLIC-1Z
R-157BZ
Does not scratch other materials.
72
tooth
ratchet
5°
LIGHTWEIGHT
PRACTICAL
RESISTANT
Composite body, 15% lighter than a
conventional ratchet.
Reversing lever for changing
the direction of rotation with
one hand.
Protection of ratchet from water
and sand intrusion
1/4” RATCHET WITH CENTRAL REVERSING
R-150BZ
1/4” RATCHET WITH CENTRAL REVERSING
RA-151BZ
The twist reversing knob allows you to change
direction of rotation with one hand.
Satin finish.
NF ISO
1174-1
NF ISO
1174-1
72
tooth
ratchet
72
tooth
ratchet
5°
1/4” BIT-HOLDER SOCKET”
EMB-1Z
Length 25 mm.
AVAILABLE:
MARCH
34
5°
INDISPENSAM
PASS THROUGH RATCHETS AND SOCKETS SET
CP-77Z
1/2” ratchet with pass through extension. Square adapter
- Sockets : 21 to 32 - 2 bimaterial ratchets - 3 ratchet
adapters (1/4” and 3/8”) - 30 bits:slotted head, Phillips®,
Pozidriv®, Torx®,Résistorx®, 6 point - 11 sockets for smallsize ratchet: 4 to 13 mm - 10 sockets for large-size ratchet:
10 to 19 mm - 2 extensions - 1 hafted
extension 1/4” with socket
bit holder 1 /4”
IAL
C
PE
S
ION
CT
ELE
S
PASS THROUGH RATCHETS
AND SOCKETS SET
PASS THROUGH SOCKETS AND ACCESSORIES
WITH 1/2” RATCHET
CP-16Z
CP-61Z
1/2” ratchet with pass through
extension
Square adapter
Sockets : 21-22-23-24-25-2627-28-29-30-32.
21
RATCHET FOR 1/2” PASS
THROUGH SOCKETS
Can be used with ordinary sockets with adapters.
1/4
S-156BZ
Can be used with ordinary sockets with
adapters.
72
tooth
ratchet
5°
Can be used with ordinary sockets with
adapters.
- 19 m
72
tooth
ratchet
- 32 m
m
5°
S-155BZ
m
72
RATCHET FOR 1/2” PASS
THROUGH SOCKETS
21
R-152BZ
10
4
m
- 19 m
RATCHET FOR 1/4” PASS
THROUGH SOCKETS
tooth
ratchet
- 32 m
m
2 bimaterial ratchets
- 3 ratchet adapters (1/4 and 3/8)
- 30 bits:Slotted head, Phillips®,
Pozidriv®, Torx®, Résistorx®, 6 point
- 11 sockets for small-size ratchet:
4-5-5,5-6-7-8-9-10-11-12-13 mm
- 10 sockets for large-size ratchet:
10-11-12 -13-14-15-16-17-18-19 mm
- 2 extensions (75 mm)
- 1 hafted extension 1/4” with socket
bit holder 1/4”.
5°
35
SOCKETS AND ACCESSORIES
SET OF 1/4” AND 1/2” SOCKETS AND
ACCESSORIES - 51 TOOLS
5
5,
APRIL
AVAILABLE:
- 24 m
75-RS2Z
m
32 m
m
75-RS1Z
SET OF 1/4” AND 1/2” SOCKETS AND
ACCESSORIES - 29 TOOLS
AVAILABLE:
5-
www.sam.eu
APRIL
10 1/4” sockets from 5 to 13 mm, 13 1/2” sockets 10 - 11 - 12 - 13 - 14 - 15
- 16 - 17 - 18 - 19 - 21 - 22 - 24 mm, 1 1/4” extension 100 mm, 1 1/4” drive
spinner handle, 1 1/4” ratchet, 2 1/2” extensions 125 and 250 mm. 1 1/2”
universal joint.
10 1/4” sockets from 5.5 to 14 mm, 15 1/2” sockets from 10 to 32 mm, 19 1/4”
ø 25 mm Phillips®, Pozidriv®, hex, Resistorx® bits, 2 1/4” extensions 55 and
100 mm, 1 1/4” universal joint, 1 1/4” bit-holder socket, 1 1/4” drive spinner
handle, 1 1/4” ratchet, 1 1/2” extension 125 mm.
W
E
N
W
E
N
3/4” RATCHET WITH
CENTRAL REVERSING
9-
m
1
3/4” SOCKETS AND ACCESSORIES SET 17 TOOLS
50 m
78-CH16Z
C-150Z
Can be used with extension bar or sliding T-handle.
12 sockets: 19-21-22-24-27-30-32-36-38-41-46-50 mm
- 1 slide handle
- 1 handle
- 1 reducer: 3/4” --> 1/2”
- 1 ratchet
- 1 extension: 400 mm.
60
tooth
ratchet
6°
W
E
N
3/4” HINGED TELESCOPIC
RATCHET, 24 TEETH
C-152Z
Telescopic handle.
Dimensions: 610-915mm.
24
tooth
ratchet
36
15°
AVAILABLE:
MAY
W
E
N
INDISPENSAM
IAL
3/8” COMPOSITE
POUSH RATCHET
C
PE
S
ION
CT
ELE
S
COMPOCLIC-2Z
Does not scratch other materials.
72
tooth
ratchet
5°
LIGHTWEIGHT
Composite body, 15% lighter
than a conventional ratchet.
3/8” RATCHET WITH
REVERSING LEVER
3/8” RATCHET WITH
CENTRAL REVERSING
J-150-AZ
J-159-AZ
Reversing lever to change the
direction of rotation with one hand.
72
tooth
ratchet
Twist reversing knob to change the
direction of rotation with one hand.
72
5°
8 DRIVE METRIC
HEXAGONAL BIT SOCKETS
SC-J8R
Detail: 6x55, 7x55, 8x55, 10x55, 12x55, 14x55,
17x55, 19x55mm.
tooth
ratchet
7 TORX 1/2”
SOCKETS SET
STX-J7R
Detail : 10, 12, 14, 16, 18, 20, 24.
5°
8 SCREWDRIVER 1/2”
SOCKETS TORX® SET
STJ-8R
Detail : 20x55, 25x55, 27x55, 30x55,
40x55, 45x55, 50x55, 55x55.
PRICE
DOWN
37
www.sam.eu
WRENCHES
How to choose the wrench that meets your needs?
PRODUCT
REFERENCE
38
PAGE
50N-LT1Z / 50N-LT2Z
50N-J12Z / 50N-J8Z
35-TR14Z
50-C-...Z / 50C-J8Z
50-FAJ6Z / 50-FA...Z
50-HJ9Z
50-CFJ12Z / 50-CF...Z
50-CTJ12Z / 50-CT...Z
50-CDJ12Z / 50-CD...Z
105-D-...Z
106C-...Z / 106C-J6Z
106CP-J4Z / 106CP-...Z
CP-12Z
114-60Z
115Z
94-SDJ12Z / 94-SDJ8Z / 94-SD...Z
54-GA...Z
54-CLZ
91-Z / 92-Z / 93-Z
39
39
43
40
40
40
41
41
41
42
42
42
42
43
43
43
44
44
44
HEX KEYS
59-R8ALZ / 59-R9A / 60-PTJ8 /
62-CTJ5Z / 62-R9A / 63-R9A /
66-R8ALZ / 66-R9A /
66-TR12Z / 67-AR9A
45
PRODUCTIVITY
ACCESSIBILITY
OPTIMISED
STORAGE
MULTI-PURPOSE
ERGONOMIC
SPECIFIC JOBS
WRENCHES
INDISPENSAM
W
E
N
SET OF 9 EXTRA-THIN
COMBINATION WRENCHES
14
50N-LT1Z
50N-LT2Z
- 19 m
m
- 13 m
m
8
SET OF 9 EXTRA-THIN
COMBINATION WRENCHES
Details: 3 x 8- 3 x 10 - 3 x 13 mm.
Details: 3 x 14- 3 x 17 - 3 x 19 mm.
ALLOWS YOU TO POOL
YOUR PURCHASES!
FOR SAM, CHOICE IS A RIGHT ...
Set of 3 x the 3 most commonly used wrenches so that you
always have the one you need!
12 COMBINATION
WRENCHES RACK
50N-J12Z
Detail: 7-8-10-11-12-13-16-17-18-19-22-24.
ISO
ISO
3318
1711-11
SPEED
100% effective storage.
Quickidentification of the
desiredsize.
FINENESS
Tapered fork
andthinne ring :
accessto the nuts
easier
8 COMBINATION
WRENCHES
RACK
50N-J8Z
Detail: 8-10-11-13-16-17-18-19.
ISO
ISO
3318
1711-11
COMFORT
Expanded handle in
center.
L
CIA
E
SP
ION
S
CT
ELE
39
WRENCHES
www.sam.eu
SET OF 9 RATCHET COMBINATION WRENCHES
SET OF 9 MULTI-NUT
COMBINATION WRENCHES
W
E
N
50H-J9Z
50C-LT1Z
For loosening all types of new and
used nuts of different shapes:
Details: 3 x 8- 3 x 10 - 3 x 13 mm.
Details: 3 x 14- 3 x 17 - 3 x 19 mm.
mm
1
8
-1 3
50C-LT2Z
19 m
4-
m
Dimensions: 10 -11 - 12 -13 - 14 16 - 17 - 18 - 19 mm.
- 19 m
m
10
At SAM, choice is a right:
Set of 3 x the 3 most commonly used wrenches so that you always have
the one you need!
72
8 RATCHET COMBINATION
WRENCHES SET
8
50C-J8Z
tooth
ratchet
-1 9
5°
mm
8 - 10 - 11 - 13 - 16 - 17 - 18 - 19 mm.
- Chrome-plated polished.
AVAILABLE:
APRIL
8
SET OF 6 SHORT RATCHET
COMBINATION WRENCHES
50-FAJ6Z
m
-14 m
Details: : 8 - 10 - 11 - 12 - 13
- 14 mm.
TIME SAVING
SAFETY
For operation of approach and
fast loosening.
No risk of accidental reversal,reversing
mechanism built into body.
RATCHET COMBINATION WRENCHES IN MM
Now available in large sizes.
50-C-27Z
27 mm
50-C-30Z
SHORT RATCHET COMBINATION WRENCHES
40
50-FA8Z
50-FA12Z
50-FA10Z
50-FA13Z
50-FA11Z
50-FA14Z
30 mm
50-C-32Z
32 mm
COMPACT
ACCESSIBILITY
40% shorter than a
conventional wrench:ideal for cluttered
areas.
5° swing.
SAFETY
Reversing mechanism built
into wrench.
AVAILABLE:
APRIL
INDISPENSAM
SHORT HINGED RATCHET
COMBINATION WRENCHES
50-CT14Z
50-CT9Z
50-CT15Z
50-CT10Z
50-CT16Z
50-CT11Z
50-CT17Z
50-CT12Z
50-CT18Z
50-CT13Z
50-CT19Z
8
50-CT8Z
12 HINGED RATCHET COMBINAISON
WRENCHES SET
-1 9
PRICE
mm
72
50-CTJ12Z
tooth
ratchet
DOWN
5°
8-9-10-11-12-13-14-15-16-17-18-19 mm.
Chrome-plated polished.
120-TOOTH RATCHET COMBINATION
WRENCHES
50-CD14Z
50-CD9Z
50-CD15Z
50-CD10Z
50-CD16Z
50-CD11Z
50-CD17Z
50-CD12Z
50-CD18Z
50-CD13Z
50-CD19Z
12 RATCHET COMBINATION WRENCHES SET
-1 9
50-CFJ12Z
RATCHET COMBINATION WRENCHES +
RATCHET EFFECT FORK HEAD
50-CF8Z
50-CF14Z
50-CF9Z
50-CF15Z
50-CF10Z
50-CF16Z
50-CF11Z
50-CF17Z
50-CF12Z
50-CF18Z
50-CF13Z
50-CF19Z
mm
72
tooth
ratchet
5°
Bright polished finish.
Detail: 8-9-10-11-12-13-14-15-16-17-18-19 mm.
Ring 12 point : Speed of execution thanks to the
72 teeth ratchet and it’s recovery angle of 5°.
12 RATCHET COMBINATION
WRENCHES 120 TEETH SET
tooth
ratchet
8
PERFORMANCE
120
50-CDJ12Z
Bright polished chrome finish.
180 ° hinged ratchet.
HANDLING
8
50-CD8Z
3°
m
-1 9 m
OPTIMIZED RECOVERYANGLE TO FACILITATE
WORK IN LIMITEDSPACES AND INTERVENE
WHERE OTHERWRENCHES CANNOT GO !
PRICE
DOWN
HANDLING
FORK WITH RATCHET
EFFECTAVOIDING PUT
OUT CONSTANTLYDURING
TIGHTENING.
L
CIA
ON
TI
LEC
E
SP
SE
Bright polished chrome finish. 180 ° hinged ratchet
120 teeth, recovery angle of 3 °
Detail: 8-9-10-11-12-13-14-15-16-17-18-19 mm.
Surface drive profile to preserve nuts.
PRICE
DOWN
41
WRENCHES
www.sam.eu
IAL
SET OF 4 RATCHET RING
WRENCHES, 4 IN 1
8
Wrench n° 1: 8 / 10 / 12 / 13.
Wrench n° 2: 9 / 11 / 14 / 15.
Wrench n° 3: 16 / 17 / 18 / 19.
Wrench n° 4: 20 / 21 / 22 / 24.
-2 4
S
ON
TI
LEC
6 RATCHET RING WRENCHES SET
SE
PRICE
106C-J6Z
8x9, 10x11, 12x13, 14x15, 16x18,
17x19 mm.
Chrome plated polished.
DOWN
8
106CP-J4Z
C
PE
-1 9
mm
72
tooth
ratchet
PRICE
5°
mm
72
tooth
ratchet
5°
NF ISO
NF ISO
691
1711-1
DOWN
ACCESSIBILITY
5° swing, ideal forconfined
spaces.
RING RATCHET WRENCHES
NF ISO
NF ISO
691
1711-1
AVAILABLE:
6 X 7 MM
APRIL
106C-6X7Z
17 X 19 MM
106C-17X19Z
AVAILABLE:
21 X 23 MM
10 X 11 MM
APRIL
SAFE
CONVENIENT
4 dimensions in
1 wrench. IDEAL
FOR TRAVELLING
MAINTENANCE.
4 reversing mechanismsin body of
wrench to prevent anyaccidental
reversing.
106C-10X11Z
106C-21X23Z
AVAILABLE:
12 X 13 MM
4-IN-1 RATCHET RING WRENCHES
106CP-1Z
106CP-3Z
106CP-2Z
106CP-4Z
22 X 24 MM
106C-12X13Z
106C-22X24Z
BOX OF 12 RATCHET WRENCHES
CP-12Z
105-D-11X13Z
SPACE SAVING
Details: 1 ratchet wrench + sockets:
8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 17 - 19 mm.
8
STRAIGHT RATCHET RING WRENCHES
105-D-16X18Z
105-D-17X19Z
12 DIMENSIONS
IN 1 WRENCH
42
-1 9
mm
Ideal for the itinerant
maintenance
APRIL
INDISPENSAM
FOR SAM, CHOICE IS A RIGHT...
Set of 3 x the 3 most commonly used wrenches so that you always have the one you need!
35-TR16Z
- 19 m
PRICE
Details: 3.2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 - 15 - 16 - 17 mm.
Ideal for precision engineering work.
2-
3,
10 - 11 - 12 - 13 - 16 - 17 - 18 19 mm
- Chrome-plated
polished - 6x6 point
m
DOWN
14
SET OF 16 ELECTROSAM® MICROMECHANICS WRENCHES
IN A POUCH
17 m
m
- 19 m
m
7
8 HOLLOW ANGLED
SOCKET WRENCHES SET
94-SDJ8Z
7 - 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18
- 19 - 22 - 24 mm. - Chrome-plated
polished
p
- 6 point.
PRICE
Details: 3 x 14 - 3 x 17 - 3 x19 mm.
10
94-SDJ12Z
- 19 m
m
94-SDL2Z
Details: 3 x 8 - 3 x 10 - 3 x 13 mm.
12 HOLLOW ANGLED
SOCKET WRENCHES SET
SET OF 9 HOLLOW OFFSET SOCKET WRENCHES, 6 OR 12 POINT
- 13 m
m
94-SDL1Z
8
SET OF 9 HOLLOW OFFSET SOCKET WRENCHES, 6 OR 12 POINT
DOWN
AVAILABLE:
APRIL
HINGED HOOK WRENCH FOR
NOTCHED NUTS
114-60Z
Length: 175 mm.
Capacity 35 - 60 mm.
EXPANDABLE PIN WRENCH FOR 13”
NOTCHED NUTS
115Z
For blocking all notched or slotted nuts.
Capacity: 50 to 140 mm.
43
WRENCHES
www.sam.eu
UNIVERSAL KEY
COMPACT
UNIVERSAL KEY
91-Z
92-Z
Universal key for cabinets and
control boxes, gas
shut-off system, technical
installations: air conditioning,
ventilation, etc.
Details:
Recesses: 6-7-8 mm,
7-8 mm y
3-5 mm.
1 adapter for bits and reversible bit
7 mm - n° 2) on chain.
Universal key for locking systems in
electrical engineering and technical
installations: air conditioning and
ventilation, gas and water
supply, locking of sites.
Details:
5, 6 , 7-8 y 9-10 mm,
7 , 8-9, 10-11 mm,
3-5 mm,
6 mm,
5 mm to drain radiators.
UNIVERSAL KEY PEN-STYLE WITH VOLTAGE AND
MAGNETIC FIELD DETECTOR
CONVENIENT
93-Z
Access to 4 key profiles by
swivelling
the mechanism.
Universal key for cabinets and
control boxes,
gas shut-off system, technical
installations
Details: :
6 – 8.
9.
3-5.
Reversible bit /
MULTIPURPOSE
8 tools in 1 !
VERSATILE
For all common locks onthe
market .
6” SHEATHED
ADJUSTABLE WRENCH
54-GAE6Z
54-GAE8Z
10” SHEATHED
ADJUSTABLE WRENCH
54-GAE10Z
SET OF 3 ADJUSTABLE
WRENCHES
8” SHEATHED
ADJUSTABLE WRENCH
12” SHEATHED
ADJUSTABLE WRENCH
54-GAE12Z
Bi-material handle with non-slip grip Thin jaws.
COMFORTABLE
54-CLZ
Details: 6’’ 8’’ 10’’.
AVAILABLE:
Bi-material handle
with non-slip grip,
pleasant to handle
MARCH
W
E
N
PRECISION
Thin head angled
at 15°.
STRENGTH
Handle hydrocarbon,
impact and UV-resistant
and can withstand high
temperatures.
THIN JAWS.
NON-PROTRUDING JAW RACK.
44
W
NE
INDISPENSAM
6 L-HANDLE
HEXAGON KEYS SET
60-PTJ8
2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
9 RESISTORX®
KEYS RACK
9 SHORT
HEX KEYS RACK
59-R9A
62-R9A
8 - 9 - 10 - 15 - 20 - 25 - 27 - 30 40 mm.
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 10 mm.
9 TORX® KEYS RACK
66-R9A
8 - 9 - 10 - 15 - 20 25 - 27 - 30 - 40 mm.
PRICE
DOWN
9 LONG HEX WITH
SPHERICAL HEAD KEYS
67-AR9A
8 LONG RESISTORX®
KEYS WITH SPHERICAL
HEAD
59-R8ALZ
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 10 mm.
9-10-15-20-25-27-30-40 mm.
9 LONG HEX KEYS
RACK
63-R9A
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 10 mm.
8 LONG TORX® KEYS
WITH SPHERICAL HEAD
66-R8ALZ
9-10-15-20-25-27-30-40 mm.
ACCESSIBILITY
Provides access
to the screwwith
an angle up to 30°.
30°
PRACTICAL
Immediate location of dimensions on the rack.
12 ANGLED MALE TORX®
KEYS IN A POUCH
5 ASSYMETRIC “T” HEXAGON KEYS SET
62-CTJ5Z
3 - 4 - 5 - 6 - 8.
66-TR12Z
Details: 7 - 8 - 9 - 10 - 15 - 20 - 25 27 - 30 - 40 - 45 - 50.
ACCESSIBILITY
For a powerful clamping in
zones difficult to access.
L
CIA
E
SP
ION
S
CT
ELE
W
E
N
45
PLIERS
www.sam.eu
PRATICAL
Adjustable clamping power by wheel.
LOCK GRIP PLIERS HIGH CAPACITY 50 MM
212-22Z
212-25Z
50
mm
50
mm
85
mm
45 mm
HIGH CAPACITY LOCK GRIP PLIERS
217-25Z
140
mm
Designed for servicing welding torches.
Sharp edges to clean gas nozzles
Bimaterial grip. 220 mm long
50
mm
80 mm
50 mm
50
mm
L : 250 mm.
60
mm
130
mm
130
mm
252-R22GZ
80
mm
LOCK GRIP PLIERS MOBILE JAWS
L : 250 mm.
UNIVERSAL MULTIFUNCTION
WELDING PLIERS
80
mm
L : 250 mm.
50
mm
212-30Z
Prevents from the distorsion of the cage in the
effort.
LOCK GRIP PLIERS
L : 220 mm.
46
PATENT SAM
COMFORT
Unlocking one hand
RIVET
CLAMP
359-3Z
With adjustment screw - 2 interchangeable jaws
and drop retainer
- Drop retainer
- Opening capacity: 80 mm - maxi. 225 mm
- Rivet maximum capacity - Alu : 5 mm
- Steel : 5 mm - Stainless : 4 mm
- Copper : 4.8 mm
Aluminuim : 5 mm
RIVET PLIERS
WITH TWO ARMS
359-15Z
With recovery tank.
Ø maxi mm : steel (5), alu (6)
45 mm
INDISPENSAM
DIAGONAL CUTTING PLIERS WITH
SPRING, POLISHED CHROME, 160 MM
232-R16GZ
MULTIGRIP PLIERS
WITH PUSHBUTTON
201-25Z
Forged chrome vanadium steel.
Cutting capacity for piano wires:
1.6 mm.
Pliers with automatic
opening system.
UNIVERSAL PLIERS WITH SPRING,
POLISHED CHROME, 185 MM
204-R18GZ
L : 250 mm. Capacity : Ø 60 mm.
- 9 positions.
- Push button locking
- Bimaterial sheath.
Universal pliers with spring, polished chrome,
185 mm
Serrated nose to increase hold on tightening.
Cutting capacity for hard steel
wire: 2.5 mm.
Pliers with automatic
opening system.
COMFORT
Pliers with spring.
SECURITY
Pushbutton locking.
SET OF 4 CIRCLIP PLIERS
3 BIMATERIAL PLIERS SET
191-J4Z
209-J3Z
SET OF 4 PAIRS BI-MATERIAL
PLIERS
209-J4Z
1 pliers for internal circlips
with straight nose, mat chrome: 190-17A
- 1 pliers for internal circlips
with bent nose 90°, mat chrome: 191-17A
- 1 pliers for external circlips
with straight nose, mat chrome: 195-17A
- 1 pliers for external circlips
with bent nose 90°, mat chrome: 196-17A
Universal pliers 160 mm
Cutting pliers 180 mm
Multigrip pliers
- 1 x multigrip pliers.
- 1 x spring loaded diagonal cutting pliers
- 1 x spring loaded half-round nose pliers.
- 1 x spring loaded universal pliers.
COMFORT
Pliers with spring.
POWER
hardness: 62.5 hrc
19,60 mm
19,60 mm
W
E
N
47
www.sam.eu
SCREWDRIVERS
FOR SAM, CHOICE IS A RIGHT
Phillips®
Pozidriv®
Do you know the difference between a
Phillips® and a Pozidriv® screw drive?
Phillips®: Simple cross with 4 slots
Pozidriv®: Double cross, with 8 slots.
Using the right screwdriver for your screw
means:
Undamaged screws, longer tool life, no risk
of tools slipping.
6 colours to
identify the
right screw
drive
Slotted
Pozidriv®
Phillips®
Torx®
Resistorx®
6 points
PRODUCT
REFERENCE
PAGE
SET OF SCREWDRIVERS
49
T-J1-Z / T-J2-Z
T-J0-Z / T-J13-Z
T-J3-Z / T-J4-Z
T-J5-Z / T-J6-Z
T-J8-Z
IMPACT-RESISTANT
SCREWDRIVERS
50
T-ACEP-…Z
T-ACEPZ-…Z
T-ACEF-…Z
ACETPZ / ACETPHZ
48
266-J10Z
51
CP-36Z
51
EMB-23CXZ
51
EMB-31CZ
51
ZTB-J6Z
74
ZTB-PJ7Z
74
DIFFICULT
UNSCREWING
ACCESSIBILITY
ERGONOMIC
LIVE WORKING
EASY TO CLEAN
MULTI-PURPOSE
INDISPENSAM
®
SET OF 6 SLOTTED AND PHILLIPS
SCREWDRIVERS
T-J1Z
3X
1X
2X
IAL
EC
SP
ON
TI
LEC
6 SLOTTED HEAD AND
POZIDRIV® SCREWDRIVERS SET
SE
T-J2Z
3X
1X
2X
4 x 100 - 5.5 x 100 - 6.5 x 150.
8 x 150.
1 x 100 - 2 x 125.
5 TORX®
SCREWDRIVERS SET
: 4 x 100 - 5,5 x 100 - 6,5 x 150.
: 8 x 150.
: 1 x 100 - 2 x 125.
T-J3Z
10 x 80 - 20 x 100 - 25 x 100 - 30 x
115 - 40 x 130.
High precision
HEAT TREATMENT.
C
5 RESISTORX®
SCREWDRIVERS SET
ENVIRONMENTALLY FRIENDLY
SUPPLIED IN A REUSABLE FABRIC CASE
with an integrated removable panel.
5 SLOTTED HEAD AND
PHILLIPS® SCREWDRIVERS
SET EXTRA SHORT BLADE
AND HANDLE
T-J4Z
ERGONOMIC
3 rounded zones for quick , precise rotation of the screwdriver.
4 flat bearing zones for powerful, comfortable tightening.
PRACTICAL
T-J5Z
10 x 80 - 20 x 100 - 25 x 100 - 30 x
115 - 40 x 130.
3X
2X
: 2,5 x 50 - 4 x 25 - 5,5 x 35.
: 1 x 25 - 2 x 35.
SCREWDRIVER SET
FOR CARPENTER
8 X SLOTTED HEAD,
PHILLIPS® AND POZIDRIV®
SCREWDRIVER SET
4 flat zones, will not roll.
SET OF 10 SLOTTED, PHILLIPS®
AND POZIDRIV® SCREWDRIVERS
T-J10Z
W
E
N
Electrician’s : 3.5 x 75 – 4 x 100 – 5.5 x 150.
Mechanic’s : 6.5 x 150 – 8 x 200 – 10 x 200
1 x 100 – 2 x 125.
1 x 100 - 2 x 125.
SET OF 13 SLOTTED, PHILLIPS® AND
POZIDRIV® SCREWDRIVERS
T-J13Z
Electrician’s : 4 x 25 – 6.5 x 35 - 3.5 x 75 – 4 x 100 – 5.5 x 100.
Mechanic’s : 6.5 x 150 – 8 x 150 – 10 x 175
2 x 35 - 1 x 100 – 2 x 125.
1 x 100 - 2 x 125.
T-J6Z
1 x 100 - 2 x 125.
10 x 80 - 15 x 80 - 25 x 100 - 30 x
115 - 40 x 130.
T-J8Z
Electrician’s : 4 x 100 - 5,5 x 100 6,5 x 150
Mechanic’s : 8 x 150.
1 x 100 - 2 x 125.
1 x 100 - 2 x 125.
49
SCREWDRIVERS
www.sam.eu
Since for SAM, choice is a right, all our acetate
screwdrivers are available individually.
POWERFUL
Metal striking
surface at the
back of the
handle in case of
«frozen» screws.
SET OF 6 IMPACT-RESISTANT
SCREWDRIVERS WITH ACETATE
HANDLES, SLOTTED AND PHILLIPS®
T-CETPHZ
4 x 100 - 6,5 x 100 - 8 x 175.
1 x 100 - 2 x 100 - 3 x 100.
PRACTICAL
Easy to clean.
SET OF 6 IMPACT-RESISTANT
SCREWDRIVERS WITH ACETATE
HANDLES, SLOTTED AND POZIDRIV®
ERGONOMIC
Pleasant to handle. .
T-CETPZZ
4 x 100 - 6,5 x 100 - 8 x 175.
1 x 100 - 2 x 100 - 3 x 100.
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE PHILLIPS® NO. 1 X 100
T-CEP-1X100Z
T-CEPZ-1X100Z
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE PHILLIPS® NO. 2 X 100
T-CEP-2X100Z
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE POZIDRIV® NO. 2 X 100
T-CEPZ-2X100Z
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE PHILLIPS® NO. 3 X 100
T-CEP-3X100Z
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE POZIDRIV® NO. 1 X 100
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE POZIDRIV® NO. 3 X 100
T-CEPZ-3X100Z
IMPACT-RESISTANT SCREWDRIVER WITH
ACETATE HANDLE, SLOTTED 4 X 100
T-CEF-4X100Z
IMPACT SCREWDRIVER WITH ACETATE
HANDLE, SLOTTED 5.5 X 100
T-CEF-55X100Z
IMPACT SCREWDRIVER WITH ACETATE
HANDLE, SLOTTED 6.5 X 150
T-CEF-65X150Z
IMPACT SCREWDRIVER WITH ACETATE
HANDLE, SLOTTED 8 X 175
T-CEF-8X175Z
Safety note: For your safety, wear protective
goggles and gloves.
50
W
E
N
INDISPENSAM
23-PIECE TORX PLUS® INSERT BIT
SET AND CASE
EMB-23CXZ
31-PIECE SCREWDRIVER BIT SET
AND CASE
AVAILABLE:
EMB-31CZ
MARCH
30 colour ring screwdriver bits
No. 1 - 3 x No. 2 - 2 x No. 3.
No. 1 - 3 x No. 2 - 2 x No. 3.
2 - 2,5 - 3 - 4 - 5 - 6.
10 - 15 - 20 - 25 - 30 - 40.
3 - 4 - 4.5 - 5 - 5.5 - 6,5
+ 1 bit holder.
-1 1/4” adapter for electric drills.
-1 1/4” adapter.
-1 1/2” - 3/8” adapter.
- 10 bits with bore hole: 10 - 15 - 20 - 25 - 30 - 40 - 45 - 50 - 55 - 60.
- 10 without bore hole: 10 - 15 - 20 - 25 - 30 - 40 - 45 - 50 - 55 - 60.
W
E
N
CASE WITH RATCHET
SCREWDRIVER AND LONG
SHAFT SOCKETS - 10
TOOLS
266-J10Z
1 large bi-material ratchet
screwdriver.
1 small bi-material ratchet
screwdriver.
8 long shaft sockets for ratchet
screwdriver.
AVAILABLE:
MARCH
COMPACT
Will fit easily into your
pocket or toolbox.
W
NE
MULTI-PURPOSE
Thanks to the interchangeable
accessories and different
lengths possible, you will be
able to access screws and
nuts in all circumstances.
SET OF 36 BITS
RATCHET SYSTEM
1 x 1/4” ratchet, 1 x 1/4” bit holder,
1 x 100 mm extension, 1 long
magnetic bit holder
+ 32 bits L 25 with coloured rings.
10-15-20-25-27-30-40.
6-7-8-9.
1,5-2-2,5-3-4-5-6-7-8 mm.
n° 1-2-3.
n° 1-2-3 .
3- 4-5,5 mm.
1-2-3.
CP-36Z
3 positions: tightening,
loosening and fixed position.
IAL
C
PE
S
3 GOOD REASONS TO
BUY THIS PRODUCT
COMPACT
Easy to carry in a pocket or
toolbox.
INGENIOUS
Built-in LED light (rechargeable battery + charger).
COLOUR
Quick identification of
profile.
ION
S
CT
ELE
51
CUTTERS
LIGHT ALLOY KNIFE WITH
RETRACTABLE BLADE
www.sam.eu
RECOMMENDED BY
HEALTH AND SAFETY
COMMITTEES!
378-7Z*
ULTRA-STRONG!
BIMATERIAL CUTTER
WITH 18 MM BLADE
378-9Z*
Shock-resistant Zamak® body.
Trapezoidal blades.
Inside the cutter body: 1 assembled blade + 2
spare blades.
Ridged push-button to avoid slipping.
AVAILABLE:
AVAILABLE:
MARCH
W
W
NE
BI-MATERIAL CUTTER 18 MM BLADE
NE
CUTTER
378-30Z*
SELF-RETRACTING BLADE CUTTER
378-27*
Bi-material body to avoid any sliding. Autoblocking
blade assembled with a divisible blade of 18mm.
Reserve of two blades possible in the body of the
cutter. Length : 160 mm
378-40*
Safety knife.
- Blade automatically retracts after use.
- Zamak body.
25mm
SECURITY
Bi-material body to
avoid any sliding.
SECURITY
Blade automatically retracts after use.
*Blades sold on page 403 of our catalog SF-4.
BOX OF 100 EXTRA BLADES
FOR RETRACTABLE KNIVES AND CUTTERS
379-70Z
8 breakable elements. Box of 100 blades.
Width of blade: 18mm
Compatible blades with the model 378-30.
52
MARCH
Shock-resistant Zamak® body.
Stainless steel blade channel.
Blade locked by push brake.
Inside the cutter body: 1 assembled blade + 2
spare blades.
CUTTER BLADE
379-25
10 blades box
INDISPENSAM
KNIFE FOR ELECTRICIAN
2 BLADES
SAFETY LOCK STEEL
BOLSTER AND GRIP
POCKET KNIFE
371Z
Equipped with 2 blades whitch one is
billhook of 70 mm
Lenght: 170mm Weight: 110g
372Z
Polished blade stainless steel
System for locking the blade in the
open position
HACKSAW FRAME
791
CUTTING HEIGHT : 109 MM
PRICE
ELECTRICIAN’S SCISSORS
376Z
Scissors made entirely of forged
steel. Blade with wire cutting notch.
L: 150 mm.
CURVED SHEET METAL
SHEARS
334-27Z
For precise cutting of complex
outlines.
Length: 270 mm.
GENERAL PURPOSE SHEARS
331-16
To cut aluminium, leather, rubber, plastic, linoleum, strip iron, nylon…
Thick and sharp blades. Stainlless treated steel.
ABS sheathed handle. Length: 165 mm. Allow to crimp
Bloc king system in position close
COMFORT
DOWN
ALLOW TO CRIMP
HSS BI-METAL
OPTICUT METAL SAW
BLADES
691-E10AZ
COMFORT
To better guided the saw, metallic headbanc
coated with elastomer.
Blade for steel and aluminum
Length : 142 mm
Weight: 20g
FUNCTIONAL
Adjustable tension by swivelling handle.
VERSATILITY
Directional blade. 2 possibles positions :
vertical, 45°. Slope of handle's base to free the
axis of sawing.
53
www.sam.eu
TORQUE
CONTROL
40 years after it brought out
its first electronic torque
wrench, SAM has revolutionised
torque control with the 1st
Hybrid torque wrench…
Maxime recommends
Torque products engineer at SAM
HOW TO CHOOSE A TORQUE WRENCH?
MAINTENANCE, CONSTRUCTION,
REPAIRS
PRODUCTION,
REPETITIVE TIGHTENING
RESEARCH, INSPECTION,
PRECISION TIGHTENING
Mechanical torque wrenches are used by quality
and inspection departments, in industrial
maintenance, the automotive sector and construction. They enable tightening to different torques with
the same tool. All you need to do is set the desired
torque directly on the tool.
Pre-set release or click torque wrenches are used
in industrial production, the automotive sector and
construction. These tools allow repeated tightening
to a preset torque with no risk of loss of adjustment.
Electronic torque wrenches enable you to
design, calculate, inspect and tighten with great
accuracy and to save the data.
DYTC-...-Z
MC-...-RC
DYTFZ-...
222-89+120Z
DYT-...Z
54
DYG-...Z
TORQUE
INDISPENSAM
CONTROL
CLICK TYPE TORQUE WRENCH
WITH RELEASE AND FIXED RATCHET
SAFE
FEATURES
-Mechanical activation.
- Release system to prevent the tightening torque from being exceeded.
- Fixed ratchet
- Adjustment not accessible by operator.
- Product identification by serial number and certificate.
- Wrenches supplied in plastic tubes.
Torque set on a calibration
bench (Page 143-144
catalogue SF-4).
Avoids loss of setting
of tightening torque by
operator
COMFORTABLE
Ergonomic bimaterial
handle,
hydrocarbon resistant.
LIGHTWEIGHT
All aluminium
design with metal
protection of handle.
+/-4%
2 - 125
Nm
Capacity Nm
Ratchet
L mm with ratchet
MC-10-RC
2-10
1/4
180
MC-25-RC
3-25
1/4
238
MC-50-RC
15-55
3/8
330
MC-125-RC
40-125
1/2
500
COMPACT PRESET ANGLED
TORQUE WRENCH,.120 NM
222-89+120Z
1/2’’ square drive.
For use mainly in the automotive industry.
This wrench guarantees perfect tightening of wheel
nuts.
W
E
N
55
TORQUE CONTROL
www.sam.eu
TORQUER WRENCH DYNATECH® FOR ROUND ENDS
+/-3%
1 - 1000
Nm
FEATURES
1. 72 teeth ratchet, 5° increment.
Resistance test
conducted in a teasting laboratory
according to ISO
3315 standard: results above
standard.
2. Quick change of socket by simply
pressing the red button.
DYT-1000-Z
Capacity
Nm
Capacity
Nm
200-1000
4
Ratchet
Ref.
Ratchet
ratchet
Attachment
L mm
wrench only
L mm
with ratchet
3/4"
TC-2-3/4
30
1300
1410
NF EN
NF ISO
ISO 6789
3315
Wrench sold with reversible ratchet 19 mm.
3. Direction of use indicated by an
arrow
4. Product Identification: +
Reference ID number.
DYNATECH® RANGE MODEL WITH INTERCHANGEABLE END
5. Easy and precise adjustement of
the tightening torque. Durability of
marking on the graduated scale and
sliding gauge. Satin background for
easy reading. Very precise resolution
of the scale.
6. Ergonomic handle. Efficient
and comfortable grip. Resistance
to hydrocarbons, solvents, brake
fluid, oil.
Ref.
Ratchet
PRECISION
Precision guaranteed
to +/- 3 % up to 5,000
cycles (except models
with capacity of
1-5 Nm: +/- 6%);
Resolution
Nm
Capacity
Nm
Ratchet
ratchet
Attachment
L mm
NF EN
NF ISO
ISO 6789
3315
NF EN
NF ISO
ISO 6789
3315
L mm with
ratchet
DYTC-5-Z
DTC-0-R
1-5
0,05
1/4"
9x12
190
222
DYTC-25-Z
DTC-0-R
5-25
0,20
1/4"
9x12
215
245
9x12
340
370
DYTC-50-Z
DTC-0-R-J
10-50
0,50
3/8"
DYTC-100-Z
DTC-0-S
20-100
0,50
1/2"
9x12
425
470
DYTC-200-Z
DTC-S
40-200
1
1/2"
14x18
474
520
DYTC-350-Z
DTC-S
70-350
1
1/2"
14x18
540
587
DYTC-600-Z
DTC-C
120-600
2
3/4"
14x18
940
1020
Wrench sold with reversible ratchet push.
ROBUST
Overload tests
performed in test
laboratory: results
superior to standard.
Chock-resistance of
wrench. Metal
protection of handle.
All steel design.
DYNATECH® RANGE MODEL WITH FIXED RATCHET
ERGONOMIC
Bimaterial handle.
Efficient and
comfortable grip.
Materials resistant
to hydrocarbons,
solvents, brake fluid
and oil.
Fixed ratchet.
Capacity
Nm
56
Resolution
Nm
Ratchet
L mm
198
DYTFZ-5
1-5
0,05
1/4"
DYTFZ-25
5-25
0,20
1/4"
223
DYTFZ-50
10-50
0,50
3/8"
360
DYTFZ-100
20-100
0,50
1/2"
470
DYTFZ-200
40-200
1
1/2"
489
DYTFZ-350
70-350
1
1/2"
550
INDISPENSAM
ELECTRONIC TORQUE
WRENCH DYNALIGHT C
FOR RECTENGULAR ENDS
FEATURES
- Type 1 - Class C.
- Up to 340 Nm depending on model.
- Video and audio triggering.
- Tightening and loosening: accuracy + / - 2%.
- Rectangular attachment 9x12 and 14x18 mm
depending on model.
- Units Torque: Nm, Ft.lb, kg.cm, in.lb.
- Use of data with the software DYCA Sat.
- Connectivity with mini USB cable.
- Bi-material ergonomic handle resistant to hydrocarbons.
- Memory capacity: 999 values.
- Method of measurement: peak.
Complies with European directives 2004/108/EC and
2002/95/EC.
NF EN
NF ISO
ISO 6789
3315
3-340
Nm
+/- 2%
Capacity Nm
Capacité Ft.lb
Ratchet
Ref. Ratchet
ratchet
Attachment
L mm
with ratchet
L mm
wrench only
DYG-30Z
3 - 30
2,2 - 22
1/4
DTC0-R
9 x 12
410
442
DYG-135Z
13,5 - 135
9,9 - 99,6
3/8
DTC0-J
9 x 12
410
450
DYG-200Z
20 - 200
14,8 - 148
1/2
DTC-S
14 x 18
470
515
DYG-340Z
34 - 340
25,1 - 251
1/2
DTC-S
14 x 18
623
670
PRECISION
CONNECTIVITY
COMFORTABLE
Mini USB cable. SAM DYCA
SOFTWARE Data processed with
software. Data can be saved on
computer. Traceability software,
tool and measurements supplied
with wrench.
Bimaterial handle for excellent grip.
Handling and settings facilitated with
keyboard. Wide screen with display of
values set.
Wrench supplied with
certificate. Complies
with ISO 6789 standard.
L
CIA
ON
TI
LEC
E
SP
SE
Maxime’s tips
TRACEABILITY
A torque gauge is designed to control your torque wrenches.
Memory: 999 values in peak
mode. Connectivity: USB.
Data processing with SAM
DYCA software.
HOW TO CHOOSE A TORQUE GAUGE ?
FOR PERIODICAL LABORATORY INSPECTIONS ON
CALIBRATION BENCH
ELECTRONIC TORQUE GAUGE
FOR WORKSHOP
FEATURES
Allows for periodical inspection of torque wrenches.
Display of torques measured on readout. PC Link with SAM-CMU
software (software on a USB key).
Traceability (all the torques are saved).
Supplied with socket, mains adaptor and fasteners.
Units: N.m, Ft.lb, Kg.cm, In.lb.
FEATURES
Allows for daily inspection of torque wrenches
Supplied with socket, mains adaptor and fasteners.
Units: N.m, Ft.lb, Kg.cm, In.lb.
NF EN
ISO 6789
Capacity Nm
Dimension hex
+/- 1 %
NF EN
3,5-1000
Nm
ISO 6789
Capacity Nm
+/- 1 %
3,5-1000
Nm
Dimension hex
CMU-70
3,5-70
19 mm
CMU-70
CM-70
3,5-70
19 mm
CMU-400
20-400
19 mm
CMU-400
CM-400
20-400
19 mm
CMU-1000
50-1000
36 mm
CMU-1000
CM-1000
50-1000
36 mm
57
TORQUE CONTROL
www.sam.eu
DYNA-HYBRIDE: SAM HYBRID
HYBRID TORQUE WRENCH
DYNA-HYBRIDE
40 years after it brought out its first electronic torque wrench,
SAM has revolutionised torque control with the 1st Hybrid
torque wrench.
It took no less than 24 months of research to get this wrench
ready for its official launch at the Le Bourget 2015 air show.
«Hybrid wrench» because it has all the advantages of a mechanical and an
electronic torque wrench whilst offering total security when tightening the
part.
• Torque reading and release
• 4 measuring modes:
- torque,
- angle of rotation,
- torque with angle of rotation
- angle of rotation with torque as a control variable
• Tightening data saved
• Measurement of the tightening angle
• Embedded software
• Clockwise and anti-clockwise tightening
• Includes the SAM OPENTECH programme,
modules supplied as open source
Stresses:
m xx =
Mfz
Igz
.y
• Open communications protocol
• Independent of hand-hold
Mfz = bending moment / Igz = second moment of area /
Y = length in relation to the mean fibre /
Torque: C = length X Force
DYNA-RFID: RFID TORQUE WRENCH
DYNA-RFID
DYNA-RFID
Your torque wrench can be equipped with RFID: just ask!
Dedicated phone line: + 33 (0) 4 77 921 335.
SAM ENABLES YOU TO
TRACK YOUR TOOLS
THANKS TO A TOOL
LOCATING SYSTEM.
58
INDISPENSAM
1/4’’ PRECISION TORQUE
SCREWDRIVER
0.5 - 2.5 NM
TORQUE SCREWDRIVER
WITH 1/4’’ VERNIER
ADJUSTMENT 2-10 NM
T-41Z
T-42J1Z
T-42Z
One-way screwdriver, for clockwise
tightening 1/4’’ male hexagon drive.
Comes with 1 hex torque adjustment
key
One-way screwdriver, clockwise
tightening.
Female hex drive for use with 1/4’’
bits. Comes with 1 Comes with 1 hex
torque adjustment key.
AVAILABLE:
1/4
APRIL
1/4
NE
NE
W
Specially for
maintenance!
SET WITH 1/4’’ PRECISION
TORQUE SCREWDRIVER +
SCREWDRIVER BITS
Set includes:
- 1 torque screwdriver T-42Z Class
II type D.
- 1 3/8’’ ratchet, 1 male adjusting
key.
- 3 slotted bits: 4.5 - 6.5 - 8 mm.
- 3 hex bits: 3 - 4 - 5 mm.
- 3 Pozidriv bits: no. 1 - 2 - 3.
-1 Torx® bit: 20.
- 1 1/4’’ bit holder. 1 1/4’’ extension
100 mm.
AVAILABLE:
W
AVAILABLE:
APRIL
NE
APRIL
W
SAFE
Operator cannot accidentally alter the torque setting.
DYNAMOVIS TORQUE SCREWDRIVER
Coloured ring to identify torque range:
DYNAMOVIS-1Z
0.6 Nm to 1.5 Nm:
green ring
DYNAMOVIS-2Z
1.5 Nm to 3.0 Nm:
blue ring
DYNAMOVIS-3Z
3.0 Nm to 5.4 Nm:
red ring
ISO
6789
+/-6%
MODULAR
Comes with one 1 6 mm male key.
Blades sold singly, interchangeable.
Blades available for all types of use.
Mechanical release and audible signal.
ERGONOMIC
Supplied with calibration certificate.
Pleasant to handle.
Dimensions 105 x 32 mm.
CHOOSE THE BLADE TO SUIT YOUR NEEDS!
[L]
Nm max
DLF-3X0,5Z
DLF-3,5X0,6Z
DLF-4X0,8Z
[L]
Nm max
DLPZ-0Z
DLPZ-1Z
170
1/4''
DLF-5,5X1Z
DLT-6Z
DLH-1,5Z
DLT-7Z
DLH-2Z
170
1/4’’
170
1/4’’
DLPZ-2Z
DLT-8Z
DLH-2,5Z
170
1/4’’
DLT-9Z
DLH-3Z
DLT-10Z
DLH-4Z
DLT-15Z
DLPH-0Z
DLT-20Z
DLPH-1Z
170
1/4’’
DLT-25Z
DLPH-2Z
PRACTICAL
Easy torque adjustment using the male key
at the end of the hand.
W
E
N
59
PRECISION TOOLS
6 PRECISION
SCREWDRIVERS SET
276-J6Z
3X
3X
: 1,5 - 2 - 2,5.
: 0 - 00 - 1.
SET OF 6 MICRO
SCREWDRIVERS FOR SLOTTED
AND PHILLIPS® SCREWS
269-BJ6-1Z
1,4 1,9 2,3 3 mm.
N°0 - N°1.
www.sam.eu
180 TO 720 MM
TELESCOPIC MAGNET
344-4Z
FLEXIBLE MIRROR
1395-F1Z
Maximum charge raised 2.5 kg.
180 ° pivoting head.
Ergonomic handle with
pocket clip on type
« pen »
Weight : 80 g.
Plastic handle.
Oval mirror 25 x 50 mm.
Deployed length: 560 mm.
RESISTANT
Maximum charge
raised 2.5 kg.
13 PRECISION
TOOLS BOX
276-J13Z
13 tools for electrician :
1 cutting pliers
1 half round nose pliers
6 precision screwdriver:
1,5 / 2 / 2,5.
n° 0 / 00 / 1.
1 telescopic mirror
1 penlight
1 spring hook
1 Magnetic Finger
1 tweezers
PROFESSIONAL INSPECTION KIT
WITH INTERCHANGEABLE TOOLS
1395-JZ
Kit comprising: a telescopic handle, a round mirror diameter 60mm,
a rectangular mirror, lamp LED, magnet capacity 4 kg.
Lamp emitting a light extremely white and clear with a brightness
up to 22 000mcd for a life duration up to100000hours. The lamp head
is equipped with a rotary switch on / off and battery L1154 3.
Interchangeable accessories.
Kit for inspection in confined spaces.
POWER
Scope : 15 m.
10 PRECISION MEASUREMENT
AND MARKING OUT TOOLS SET
710-J13
1 caliper 1/50
2 micrometers 25 mm
and 50 mm
1 depth gauge,
2 squares,
1 centre punch,
1 compass,
1 carbide tip, 1 rule.
60
SET OF 8 PRECISION
SCREWDRIVERS
276-J8Z
4x
2x
2x
: 1,5 – 2 – 2,5 - 3.
: 0 – 00.
: 0 – 1.
W
E
N
MEASUREMENT
MEDIAFLEX® ABS CASE
INDISPENSAM
VIDEOFLEX
With locking system.
Compact and ultra-light casing.
Automatic tape reverse.
UV-313Z
3 metre tape
• Locking and rewinding systems
• ABS casing
2 METERS
UD-216-N
2 m x 16 mm.
3 METERS
UD-316-N
3 m x 16 mm.
BIMATERIAL SHORT TAPE MEASURE
SAMFLEX®
ZAMAK CASE
HANG BELT.
READABLE:
Blade lock
Ultra-resistant and
ergonomic case
2 METERS
Lm
l mm
A mm
B mm
e mm
UB-216
2
16
59
62
26
UB-316
3
16
59
62
16
UB-519
5
19
68
75
31
UB-825
8
25
87
44
37
UB-1025
10
25
87
44
37
U-109AZ
The matt tape makes ideal
readingwhatever the light
conditions or reflection. This
directiveapplies to dimensional measuring instruments
(MI-008)
ERGONOMIC
The housing provides a
perfect grip. Possibility to
use the measure placed on a
countertop.
2 m x 16 mm.
LEVELS WITH
MAGNETIC BOTTOM
3 METERS
U-210AZ
3 m x 16 mm.
5 METERS
U-519AZ
L
5 m x 16 mm.
COMFORT
Ergonomic case.
L
IA
EC
SP
N
TIO
168-40MNZ
400
168-50MNZ
500
168-60MNZ
600
168-80MNZ
800
CONVENIENT
To read verticality
regardless of your
position. Front reading.
Internal mirror at 45°
Side reading.
IAL
C
PE
C
ELE
S
S
ION
CT
ELE
S
All the SAM’s short measures are in accordance wih the European
directive MID 2004 / 22/CE.
61
METAL REMOVAL/WORKING
www.sam.eu
PUNCHES 4 MM
RETRACTABLE
CARBIDE SCRIBER
8N-4AZ
665-13
Knurled, burnished body
For scribing on hard materials.
Length: 150 mm. Tip diameter: 0.15 mm.
6 FILES SET
SCRIBER
LPJ-1Z
665Z
Heat-treated carbon steel needle point.
Ø 4 mm. Length 190 mm.
NE
2 flats
- 1 half round
- 1 round
- 1 square
- 1 triangular
Bimaterial handle
W
MULTIPURPOSE
The essential selection
for all your applications.
DEBURRING TOOL WITH FIXED BLADE
673-E6
Blade for steel and aluminum
Length : 142 mm
Weight: 20g
NON-REBOUND MALLET, 38 MM
322-38Z
Light alloy body and handle specially recommended for
delicate assemblies. The impact surfaces do not mark
the parts hammered. Interchangeable inserts. Supplied
with two hard inserts
FALSE SQUARE
250 MM
E9-250
Solid construction, suitable for mechanical work
Made from special steel chrome.
Wind nut for fixing galvanized steel blade
Dimensions: L250XW25xH2,5mm
POWER
The head of the mallet
is loaded with metal
microballs. These microballs cause inertia
on impact eliminating
rebound. You recover
more 30% strike force
SAFE
The steel balls limit
the risk of metal parts
exploding.
COMFORT
The surfaces of strike
do not mark the
hammered parts.
62
INDISPENSAM
SET OF 32 TWIST DRILLS FOR RIVETING
AND TAPPING 1-10.5 MM
TAP AND DIE SET
CTF-45Z
F1-C20Z
COMPLETE SET UP TO M 20!
- 10 sets of 3 taps in mm
(taper tap, semi-bottoming
tap, bottoming tap) ranging
from M 3 to M20 HSSE: M3
M4 M5 M6 M8 M10 M12 M14
M16 M18 M20 or 30 tools.
- 10 dies, 5 tool holders 1
large tap wrench, 1 small tap
wrench.
Set of 32 twist drills for riveting and steel
up to 800 MPA, stainless steel, grey cast
iron, aluminium alloy. 20 drills from Ø 1 to
10.5mm (steps of 0.5 mm).
12 drills Ø 1.9 - 2.1 - 2.6 - 2.9 - 3.2 - 3.3 - 3.8
- 4.2 - 5.1 - 6.8 - 7.9- 10.2 mm.
AVAILABLE:
MARCH
NEW
HSSE
W
E
N
AVAILABLE:
MARCH
31-PIECE SET OF TAPS AND DIES
SET OF 3 STEPPED
DOUBLE-EDGE BITS
CTF-31
FEL-3J
7 sets of 3 taps in mm : M 3 4 5 6 8 10 and 12 (draft, half finishing, finishing)
one left turn size 1 1/2”. 7 dies with cage (M 3 4 5 6 8 10 12).
1 die holder 25 x 9 mm. 1 screwdriver. Metal enclosure: 265 x 120 x 85 mm.
Box composed of 3 HSS step drills
with helicoidals flute in sizes 0,9, 1, 2
(FEL-1, FEL-2 et FEL-3).
Weight: 630g
HSS
SET OF 21 COBALT TAPS
CTF-22Z
7 sets in sizes M3 M4 M5 M6 M8 M10
M12. Each size includes: 3 taps (taper
tap, semi-bottoming tap, bottoming
tap).
DOUBLE-EDGED STEPPED DRILLS
FEL-7
The problems of jamming and clogging of the
chips are removed. The chamfer facilitates
removal of the drill when drilling a through
hole.
Angle Floor: 90 °.
Dimensions 6-37.
HSSE
AVAILABLE:
MARCH
NEW
AVAILABLE:
FEL-8Z
MARCH
Ø 6 - 38mm.
AVAILABLE:
FEL-9Z
MARCH
Ø 6.5 - 40.5 mm.
63
METAL REMOVAL/WORKING
BOX OF 25 DRILL BITS HSS TIN DRILL BITS
www.sam.eu
BOX OF 19 DRILL BITS HSS TIN DRILL BITS
F2-C19Z
F2-C25Z
Material: Titanium nitride. Right han cutting tolerance h8. Sharpening
of point: taper. Angle: 30°. Point angle: 118°. Applications: Twist drill
for drilling the majority of common materials. For alloy and non-alloy
steels, cast irons, brass and
aluminium low alloy Wood and
HSS
TiN
plastic materials Ø from 1.0 to
10.0 mm x 0.5mm.
Material: Titanium nitride. Right han cutting tolerance h8. Sharpening of
point: taper. Angle: 30°. Point angle: 118°. Applications: Twist drill for drilling
the majority of common materials. For alloy and non-alloy steels, cast irons,
brass and aluminium low alloy Wood
and plastic materials Ø from 1.0 to
HSS
TiN
13.0 mm x 0.5mm.
Typ
N
338
DIN
Typ
N
338
H8
30°
H8
30°
118°
DIN
118°
HSS + TIN MULTI-STEP DRILL
FELTIN-2Z
FELTIN-1Z
HSS drill + TiN with spiral flute =
better penetration and longer tool
life.
Shank with 3 flat sides = better
chuck grip.
Capacity: 30 (4-6-8-10-12-14-16-1820-22-24-26-28-30).
Capacity 32.5 (5-7.5-9.7-12.715.2-16.2-18.6-20.4-22.5-25.428.3-30.5-32.5).
HSS
TiN
FELTIN-3Z
Capacity 38 (6-9-13-16-19-2123-26-29-32-35-38).
AVAILABLE:
MARCH
W
NE
PULLER WITH 2/3 INTERCHANGEABLE
LEGS DIFFENTIAL THREAD SCREW
485-1J3
761-C-5Z
Inside and outside grip
Convertible in 2 or 3 jaws
Delivered with 2 sets of 3 inside and outside legs
- Capacity : Inside : 180 mm max, Outside: 220 mm max
- Grip power: 6 T
Power and
resistance
1
Fixed screw
2
Rotation
of the screw
Fast
approach
64
SET OF 5 HELIX
PULLERS
3
Approching
screw for
opening
Is used after drilling of a hole in the center of
screws broken to extract. Use for turn of the screw
to the right. Can be used with turns left FTG or
chuck with pawl 380-1. Composition : 5 pullers :
761-4/5/6/8/11. Diameter : 3 to 18 mm.
Weight: 125g
INDISPENSAM
2 O 3-CLAW INSIDE OR OUTSIDE UNIVERSAL
BEARING PULLER
W
NE
AVAILABLE:
APRIL
Can be used for most of
your applications!
SECURITY
Safety nut to avoid the claws being
turned round.
Safety shear pint.
Safe instant claw locking.
Self-centering.
The EX-007-140Z and EX-007-180Z pullers come
with 3 internal claws and 3 external claws.
PRECISION
Thin claws: Easy grasping of
bearings.
EASY TO USE
Controlled force.
Easily interchangeable claws.
Change over outside/inside.
Quick claw release.
2 or 3 claws.
Force T
C mm inside
C mm outside
H mm
EX-007-140Z
3
130
145
145
EX-007-180Z
4
170
195
195
SAFETY PRECAUTIONS:
-Before each use, check the condition of the tool, that it is not worn or modified and ensure it is the right one for the application in question.
-Do not use impact wrenches.
-Work safely: stand to one side, not in the axis of the device.
-Check the puller is locked and positioned correctly.
-Apply force progressively and continuously to the puller screw.
-Use a 3-claw puller whenever possible.
-Wear goggles and gloves.
65
STRIKING TOOLS
www.sam.eu
COMFORT:
Overmoulding provides an ergonomic
shape for ideal grip.
SAFETY
Head to handle
link is secured with
composite epoxy resin.
Pulling force : twice
the norm comparing
to a wood handle.
Driving force : 4 times
the norm
COMPOSITION
1/ Fiber glass - shapped bone perfect
rigidity. No risk breaking handle.
2/ Polypropylene - less vibration
3/ Overmoulded with SEBS - gives the
handle all its ergonomics
HICKORY RIVETING
HAMMER
POWERFUL
Hickory handle for greater
solidity and strength.
RIVETING HAMMER 310-TMZ
NF
E71.014
ISO
15601
H
mm
C
mm
L
mm
g
310-30TMZ
93,5
30,5
303,5
565
310-32TMZ
100
32,5
305,5
665
310-36TMZ
106
35,5
308,5
795
310-40TMZ
110
40,5
333,5
310-42TMZ
115,5
42,5
335,5
310-45TMZ
128
45,5
310-50TMZ
138
310-55TMZ
310-60TMZ
H
mm
C
mm
L
mm
g
310-30NZ
95,5
30
297
557
1010
310-32NZ
100
32
300
647
1210
310-36NZ
105
35
308
768
338,5
1460
310-40NZ
115
40
335
1062
50,5
366,5
1890
310-50NZ
135
50
376
1943
144
55,5
371,5
2290
149
60
376
2920
ROUND FACE DINGING HAMMER,
HICKORY HANDLE
JOINER’S HAMMER 307-TMZ
NF
E71.011
ISO
15601
314-28NZ
314-32NZ
307-30TMZ
314-36NZ
H
mm
C
mm
L
mm
g
119,3
29,6
302,6
665
314-40NZ
POWERFUL
Hickory handle for greater
solidity and strength.
ELECTRICIAN’S HAMMER 312-TMZ
NF
E71.012
66
PRECISION
ISO
15601
Metal wedge assembly.
H
mm
C
mm
L
mm
312-16TMZ
2
16
59
170
312-18TMZ
3
18
59
295
g
FOR YOUR SAFETY,
USE PROTECTIVE
INDISPENSAM
7 SHORT ONE-PIECE DRIFT PUNCHES
IN A POUCH
7-CTR7AZ
AVAILABLE:
MARCH
AUTOMATIC PUNCH
88Z
Regular pointing by simple pressure. Power adjustment of
penetration by screwing and unscrewing the
head. Presentation: burnished
Tip diameter: 6 mm
Length : 150 mm
Can be used without hammer.
Ø 1,9 - 2,9 - 3,9 - 4,9 - 5,9 - 7,9 - 9,9 mm.
NEW
L
CIA
ON
TI
LEC
E
SP
SE
CHISEL FOR CAR BODY REPAIRER
5 LONG DRIFT
PUNCHES SET
1-BZ
7-TR5AZ
Length : 235 mm.
Weight: 26 mm
Ø 2.5 - 3.5 - 5 - 7 - 9 mm.
CHISELS
5 DRIFT PUNCHES SET OCTOGONAL SHANK
3-200-GZ
7B-J5Z
“AIR-GRIP®” handle. 200 mm.
Drift punches in burnished chrome vanadium steel with ergonomic handle
on wall display. Size: 3 - 4 - 5 - 6 - 8 mm. Comfort: Good grip thanks to the
handle. Shock absorption.
COMFORT
Good grip thanks to the
handle.
Shock absorption.
5 DRIFTS SET
CP-JETZ
7 LONG STANDARD DRIFT PUNCHES IN
A POUCH
8-TR7AZ
Long drift punches with inserted
shanks made of natural finish
chrome vanadium steel, zinc
plated handle.
Ø 2 - 3 - 4 - 5 - 6 - 8 - 10 mm.
The set comprise:
1 sheathed handle, 2 polyamide, tips
25 mm and 30 mm,
2 brass tips 25 mm and 30mm.
The softer tip of polyamide, brass
harder it possible to adapt to
the different uses.
To position, eject or adjust
fragile parts that you do not
want to
deteriorate in precision
engineering,
automotive, aerospace.
NEW
67
STRIKING TOOLS
www.sam.eu
AVAILABLE:
W
E
N
MARCH
MALLETS WITH
CELLULOSE ACETATE TIPS
MALLETS WITH NYLON
TIPS
MALLETS WITH
CELLULOSE ACETATE/
NYLON TIPS
Ash handle. Tips interchangeable when worn.
25 MM
323-25Z
MALLETS WITH
INTERCHANGEABLE
TIPS 32 MM
30 MM
323-30Z
40 MM
320-32DZ
Specially recommended for
delicate assemblies. Chrome steel
head. Varnished ash handle. The
indentation in the head prevents
the release of the faces during use.
The impact surfaces do not mark
hammered pieces. Delivered with
two rubber ferrules
and hardwood
equivalent
Length : 275 mm
Head diameter :
32 mm
Weight: 400 g
323-40Z
50 MM
323-50Z
324-25Z
326-30ABZ
40 MM
326-40ABZ
NON-REBOUND MALLET,
38 MM
325-25Z
30 MM
30 MM
324-30Z
325-30Z
40 MM
40 MM
324-40Z
325-40Z
50 MM
50 MM
324-50Z
MALLETS WITH MALLEABLE CAST IRON HEAD
AND WOODEN HANDLE
30 MM
25 MM
25 MM
30 MM
325-50Z
AVAILABLE:
APRIL
326-30BCZ
40 MM
326-40BCZ
1 composite rubber tip (soft/
medium hard).
1 TPE tip (soft).
1 composite rubber tip (soft/medium
hard).
1 plastic tip (medium hard/hard).
30 MM
30 MM
322-38Z
Light alloy body and handle
specially recommended for delicate
assemblies.
The impact surfaces do
not mark the parts
hammered.
Interchangeable
inserts. Supplied with
two hard inserts
326-30ADZ
40 MM
326-40ADZ
1 super plastic tip (soft/medium
hard).
1 TPE tip (soft).
68
326-30BDZ
40 MM
326-40BDZ
1 composite rubber tip (soft/
medium hard).
1 super plastic tip (medium hard/
hard).
30 MM
326-30BEZ
40 MM
326-40BEZ
1 composite rubber tip (soft/
medium hard).
1 nylon tip (medium hard/hard).
INDISPENSAM
W
E
N
We can help you to choose
the striking tools you need…
323-…Z
324-…Z
325-…Z
326-…ABZ
326-…ADZ
326-…BCZ
326-…BDZ
O
O
326-…BEZ
APPLICATIONS
BUILDING INDUSTRY / CONSTRUCTION
PAVING
O
TILING / LAYING SLABS
O
O
LAYING COPING
LAYING CHALK SANDSTONE SLABS
O
SCAFFOLDING CONSTRUCTION
O
TENT/SHED CONSTRUCTION
O
O
O
O
O
O
O
O
GARDENING/LANDSCAPING
O
DRY CONSTRUCTION
METALWORKING INDUSTRY
AUTOMOTIVE ASSEMBLY/REPAIR WORK
O
O
O
O
O
O
O
POSITIONING PARTS FOR MACHINING IN VICE
O
POSITIONING PARTS FOR MACHINING
REPAIR/MAINTENANCE WORK
O
O
O
BODYWORK
O
O
O
SHEET METALWORK
O
O
O
BODY WORK REPAIRS
O
O
O
HOUSING ASSEMBLY
O
O
CONSTRUCTION OF MOULDS
O
O
FITTING PARTS IN MACHINING JIGS
O
O
O
O
O
O
O
WOODWORKING INDUSTRY
FURNITURE MAKING
O
WINDOW/DOOR CONSTRUCTION
O
O
CONSTRUCTION OF PREFABRICATED HOUSES
O
JOINERY
O
CARPENTRY
AGRICULTURE/FORESTRY
CONSTRUCTION OF FENCING
O
PLACING WEDGES
O
REPAIR/MAINTENANCE WORK
ON AGRICULTURAL MACHINERY
O
O
O
O
For your safety:
Wear safety goggles
69
www.sam.eu
In spite of the lack of light, some men have lit up their era.
ngs differently.
At SAM, we plan to enable you to see thi
In spite of the lack of light, some men have lit up their era.
Lighting today means a family of products used in all sectors of activity.
At SAM, we are aware of this and have decided to develop this range in 2015.
You will find different products to meet your different applications: inspection
lamps, headlamps, floodlights…
I N N O V A T O R S
B Y
T R A D I T I O N !
DEPUIS 1921
www.sam.eu
70
INDISPENSAM
30 LEDS INSPECTION LAMP
STIP LED INSPECTION LAMP
BAL-19
BAL-29
1
Auto
65
13
Leds
Lume
ns
3
Lume
ns
5 Le d
s
30
38
my
HANG IT
ANYWHERE!
W
E
N
Lume
ns
30
LED INSPECTION LAMP
BAL-25
le 1
°
no
ab
15 + 3 LEDs in the end of the lamp.
Magnetic base
Charger with Li-on battery: 3.7 V 1300 mAh.
3h
s
en
Lu m
omy
80
2953RZ
Easy to hang up.
Coloured charging indicator.
70 LEDs. 380 lumen. Impact
resistant to 1m.
Rechargeable battery (4200
mAH).
Comes with 220V and 12V mains
charger. 10 metre cable.
Waterproof. Ingenious hanging
system.
on
5h
BAL-23Z
18 LED 180° MAGNETIC
INSPECTION LAMP
omy
Pli
MARCH
on
Aut
AVAILABLE:
70 LED INSPECTION LAMP WITH
EEC 24 V PLUG
0
Lu m
36
0
3h
Aut
omy
6h
14
on
s
en
Lu m
s
en
0
New technology ” Strip LED” allows
more powerful lighting than LED technology.
IP65 protection. IK 07
Swivel hook. 3 hours battery autonomy
Charging time 2.5 h
Aut
IP 65
Brightness more than 1500 Lux
Temperature <30 ° C
Charging time : 2,5 h for 6 hours operation.
Hanging hook
Shock and corrosion resisitant
DISPLAY OF 10 BAL-25
BAL-25J10
7 LEDs + 1 on the top. Required 3AAA batteries included
Provides a wide and direct light.
Pocket clip + magnet on the back to work with free hands.
Ultra-compact light source.
Length: 15.5 cm
71
LIGHTING
www.sam.eu
3 LED HEADLAMP
Suitable for all uses.
FRONT-1Z
AVAILABLE:
APRIL
Different lighting modes: high intensity, low
intensity, red LED for night vision. Direction
adjustable. Charge status indicator. Comes
with batteries.
3 LEDs. PELI technology.
W
E
N
PRACTICAL
3 lighting modes
1m
4
20
h
Aut
19
11
Lu m
s
en
omy
on
IP 54
3 LED HEADLAMP
AVAILABLE:
APRIL
FRONT-2Z
Resists all difficult weather conditions thanks
to its solid polymer protective casing.
Up 21 hours’ use in low intensity mode.
Swivels 45°. PELI technology.
Comes with batteries.
66
h
Aut
21
IP 54
Lume
ns
22 m
omy
on
W
E
N
360° PORTABLE BATTERY
FLOODLIGHT
ZOOM LED HEADLAMP
FRONT-6Z
AVAILABLE:
Adjustable headlamp, high power, adjustable beam
with elastic strap. Battery housing at the back. Comes
without batteries.
14
Aut
5
Lu m
s
en
17 0 m
h
IP 44
75
omy
on
MARCH
MOBILIGHT-1Z
PORTABLE
Height adjustable up to 152 mm.
Comes with 2 Lithium ion rechargeable
batteries.
Charge status indicator.
58° beam distribution angle, 2 LEDs per
head.
PELI technology.
Supplied with carry case.
omy
4h
Aut
on
COMPACT
Weight with battery: 3.80 kg.
500
EW
N
72
PRACTICAL
Opens in 5 seconds!
W
NE
ens
e t 1 0 00 l u m
MEASURING AND TESTING DEVICES
600 A CURRENT
CLAMP
FL-13
AC/DC current and voltage until 600
A/V
Resistance, temperature
Diode test.
Spark plug and alternator control
Resolution : 1A or 1000mA, 1mV,
0,1Ohm, 0,1pF 1°C or 1°F
INDISPENSAM
MULTIMETER
FL-2010
Electric protection ...................................................EN 610101
Insulation : ....................................... Class 2 double insulation
Overvoltage category : ............................................ Cat II 100 V
V / AC : ...............................................................................700 V
V / DC : ............................................................................1000 V
mA DC/AC : ................................................................... 400 mA
A DC/AC :............................................................................ 20 A
Frequency, resistance, capacity,
diode test, continuity :...........................................250 V DC/AC
2000W HOT AIR GUN
DT-20Z
Heat and hot air controls with backlit LCD
screen.
Air flow rate: 200 to 500 L/min. Temperature:
50°C to 650°C + cold air.
230/240 V AC. Comes with 2 attachments:
reducer nozzle and welding nozzle.
EN
61010
L
CIA
ON
TI
LEC
E
SP
SE
MULTIMETER 1000V
1000 °C INFRARED THERMOMETER
FL-11
Especially designed for automotive applications
- DC voltage from 3,2V to 1000V, AC voltage from 3,2V
to 750V
- DC Current from 32mA to 10A, AC from 32mA
to 300mA
-Resistance from 320 to 32 kHz
- Frequency from 0,01 to 32 kHz
- Diode controller
- Tachometer from 0 to 12 000 rpm
- Thermometer from -20°C to +1370°C or
from 0°F to 2000°F
shock-proof,
Accessories included : cable probe,
temperature probes, induction clamp.
FL-3
Dual laser sighting. From -50 °C to
1000°C. Adjustable emissivity from
from 0,1 to 1,0. Automatic storage of
data +/-% accuracy
PRICE
DOWN
+/-1%
73
ELECTRICIAN
www.sam.eu
1000V INSULATED BIMATERIAL
SCREWDRIVERS SET
MULTI-FUNCTION ERGONOMIC
PLIERS INSULATED
1000 V
PRICE
250-18TIZ
DOWN
Allows cutting, stripping and crimping.
Crimp terminal: 1.5 to 2.5 mm2.
Stripping wire 1.5 to 2.5 mm2.
Length 180 mm.
Inclined shape: Save your joints and muscles.
Polished varnished finish. Forged chrome vanadium steel.
Hardness: HRC 60
Meets NF ISO 5749 and IEC 60900 standards.
VERSATILE
ZTB-J6Z
4 x 3 x 100 - 3.5 x 100 - 4 x 100 5.5 x 125
2 x N° 1 x 125 - N° 2 x 150.
Complies with NF ISO 5749 and
CEI 60900 standard.
Allows cutting,
stripping and
crimping.
1000V INSULATED BIMATERIAL
PLIERS SET
ZTB-PJ7Z
IAL
Complies with
NF ISO 5749 and CEI 60900 standard.
C
PE
S
E
SEL
ERGONOMICS DIAGONAL
CUTTING PLIERS INSULATED 1000 V
ON
CTI
PRICE
251-18TIZ
Diagonal cutting pliers handles with bi-material. Length: 180 mm.
Polished varnished finish. Forged chrome vanadium steel.
Tapered head for greater cutting precision.
COMFORT
4 PLIERS 1000 V SET
Complies with NF ISO 5749
and IEC 60900 standards.
DOWN
Inclined shape :
Save your joints and
muscles.
Complies with NF ISO 5749 and CEI 60900 standard.
1 cutting plier - 1 cable sheath
strippers - 1 multigrip pliers
3 screwdrivers 1 screwdriver
INSULATING MAT
Z-420
To isolate the operator from
conducting elements (floors, walls).
Molded rubber 3 mm.
Dimensions: 1000 x 600 mm.
PUNCH KIT
201-J4TIZ
Multigrip pliers, straight nose pliers,
cutting pliers,combination pliers.
694-C-32-N
Package includes:
1 ergonomic handle to absorb
the vibrations
29 punches from 2 to 50.
1 centering tip.
1 chuck diameter from 2 to
50 mm.
COMFORT AND SAFETY
8 SCREW HOLLOW PUNCHES
(IN SET)
Ergonomic comfort handle to
absorb vibrations transmitted
to hand by shocks. Hands are
thereby distanced from the
strike area.
EMP-11JZ
6 hollow punches Ø 15.2 18.6 20.4
22.5 28.3 32 mm.
• Boring drill.
• Lubricating paste.
• 3 ball-bearing screws: M10(2),
M12(1)
74
L
CIA
ON
TI
LEC
E
SP
SE
INDISPENSAM
CABLE SHEATH STRIPPERS
220-28
AUTOMATIC STRIPPING PLIER
241-15
AUTOMATIC WIRE STRIPPERS
240-20A
To strip all electrical PVC or rubber cables.
Setting the cutting depth with the screw on the
back.
Equipped with an auto rotating blade knife
Equipped with a hook blade to strip flat cables.
Dimension : 8-28.
For stripping and cutting of electrical conductors
of monofilaments and multifilament of 0.2 to
6 mm2. Automatic adaptation to the wire diameter.
Provided with a incorporated wire cutter
For cutting and stripping electrical conductors.
Bi-material handle. Automatic adjustment of the blades
according to the thickness of the insulation.
Open automatically after stripping. Light and durable:
Polyamide body reinforced with steel parts. Depth
adjustment stripping. Adjustment of the
stripping force according to the
diameter of cable. Capacity of
the cable cutter:
- Stranded: 6 mm2,
- Single strand: 4 mm2.
CRIMPING PLIERS
CRIMPING PLIERS L
FOR PRE-INSULATED TERMINALS
CRIMPING PLIERS
FOR PROTECTIVE TIPS
241-42Z
241-35
2
Capacity: 0.75 to 6 mm
• Burnished metal sheet.
Crimping pliers for insulated terminals with
section from 0.5 to 6 mm2.
Ergonomic handle to prevent slippage during use.
The trigger system of the safety catch ensures the
reliability of the pliers
TUBE CUTTING PLIER
PLIER FOR PLASTIC COLLARS CLAMP
618-P-42
For plastic materials and PVC.
Blade magnesium alloy for a clean cut
Locking and anti-opening system during cutting.
Automatic opening of the blade
Ergonomic anti finger pinch.
Instantaneous change of the blade without tools
Interchangeable blade
Length : 230 mm
Cutting capacity : 42 mm
241-37
For crimping face without adjustment, the
protective tips on flexible cable from 0.14 to 16 mm2.
Automatic unlocking limit switch. Brown body
hardened steel made. Equipped with ergonomic
handles for a non-slip grip. Length: 250 mm.
220-10Z
Enables the quick removal of plastic collars
around cables and threads
- For collars 2.4 to 9 mm in width.
- Manual cutting of the tail of the collar
- Equipped with a system of reduction of the effort
- Interchangeable knife and spring.
75
www.sam.eu
D RO P PREVENTI O N
DROPPED OBJECT
NEED A SYSTEM TO ENSURE TOOLS ARE
PREVENTION
NOT DROPPED WHEN YOU ARE WORKING AT
HEIGHT …
SYSTEM
… ON SCAFFOLDING, BRIDGES, TELECOMMUNICATIONS
TOWERS, CRANES, LADDERS, POWER LINES, WIND TURBINES…
76
D RO P PREVENTI O N
INDISPENSAM
SAM
STRAP
1
offers 3 solutions to prevent
objects being dropped while you
are working at height.
Wrist tool lanyard
DRG-1-FME
(PAGE 78).
3 TO O L BELT
CLI PS
2
Tool belt
PACK-FME.
(PAGE 78).
Clips
CLIP-…-FME + LEACH-FME.
(PAGE 78).
77
www.sam.eu
D RO P PREVENTI O N
WHAT IS FME (FOREIGN MATERIAL EXCLUSION) EXACTLY? :
An FME policy is based on prevention and aims to reduce as far as possible the risk
of foreign objects getting into installations and equipment.
CLIP-…-FME
CLIP-…-FME
BAG OF 5 FME TOOL
HOLDER CLIPS
SAM PROPOSES YOU A UNIVERSAL ANTI-FALL SYSTEM FOR YOUR
TOOLS THE SAM ANTI-FALL SYSTEM HAS BEEN DESIGNED TO PREVENT
OBJECTS FROM FALLING DURING WORK AT A HEIGHT. IT COMPLIES
WITH THE FME POLICY. TO CHOOSE THE RIGHT CLIP, MEASURE THE
TOOL TO BE FITTED OUT AND REFER TO THE DIMENSIONAL DRAWINGS.
FME PACK WITH SET OF 10 TOOLS.
Ideal kit for working in total safety and avoiding dropping tools.
Includes an FME PACK + 10 stainless steel FME tool retaining clips + 10 indispensable tools =
- 3 combination wrenches 10 - 13 - 17 mm
- 2 mechanic’s slotted screwdrivers 4 x 100 - 6.5 x 150. 1 Phillips® No. 2 screwdriver.
- 1 x push button multigrip pliers, 1 x spring loaded diagonal cutting pliers, 1 x spring loaded
universal pliers, 1 hammer 40 mm.
Contains:
1 belt
+ 2 tool pouches
+ 1 ring holder
+ 10 tool holder cords with snap-hook
+ 1 lanyard.
COMFORTABLE
VERSATILE
Renforced padded belt
Compartments and pockets for
tools of different sizes:
hammers, pliers, screwdrivers,
wrenches, etc.
LEACH-FME
FME TOOL
LANYARD
FME TOOL LANYARD
WITH SNAP-HOOK
SECURED
Fitted with fastening hooks to
prevent tools from falling when
the operator is at work.
DOWN
TOOL HOLDER
BELT PACK
DRG-1-FME
78
PRICE
PACK-FME
PACK-FME-10Z
INDISPENSAM
Trade reference
Visual
Dimensional drawing in mm
Description of compatible products
CLIP-1-FME
Keys with Ø5mm holes (male, hex, handles,
feeler gauges, cutters, etc)»
CLIP-2-FME
Combination wrenches, ring wrenches, etc
CLIP-3-FME
Combination wrenches, ring wrenches, open end
wrenches, pliers, etc.
CLIP-4-FME
Open end wrenches, combination wrenches 8 to
19mm, 1/2» ratchets, etc.
CLIP-5-FME
Combination wrenches, ring wrenches, 1/2» ratchets
CLIP-6-FME
CLIP-7-FME
Combination wrenches 13-21 mm screwdrivers, needle
files with handle mounted, etc.
Male hex keys with I handle, bimaterial screwdrivers,
nut spinners mounted on handle, extensions with
handle, bimaterial handles for reversible blades, lock
grip pliers, etc.
CLIP-8-FME
Chisels, etc
CLIP-9-FME
Hammers and massets with non-drilled handles, etc.
CLIP-10-FME
Tubular socket wrenches, etc.
CLIP-11-FME
Tubular socket wrenches, etc
CLIP-12-FME
Combination wrenches 34 to 38, etc.
CLIP-13-FME
Special sockets 8 to 14, etc.
CLIP-14-FME
Special sockets 15 to 32, etc
CLIP-15-FME
1/2” extensions, etc
CLIP-16-FME
Tubular socket wrenches 21 to 26 mm, etc.
CLIP-17-FME
Nail and drift punches, etc.
CLIP-18-FME
Circlip pliers, etc
CLIP-19-FME
Screwdrivers, etc.
CLIP-20-FME
Pliers, etc.
CLIP-21-FME
Special sockets, etc
79
DROP PREVENTION
www.sam.eu
SAM: THE SPECIALIST IN DROP PREVENTION
THE 145 MOST COMMONLY USED DROP PREVENTION ITEMS / BUY YOUR TOOL READY EQUIPPED WITH CLIPS
Sales reference
NS-8-FMEZ
NS-9-FMEZ
NS-10-FMEZ
NS-11-FMEZ
NS-12-FMEZ
NS-13-FMEZ
NS-14-FMEZ
NS-15-FMEZ
NS-16-FMEZ
NS-17-FMEZ
NS-18-FMEZ
NS-19-FMEZ
NS-21-FMEZ
NS-22-FMEZ
NS-23-FMEZ
NS-24-FMEZ
NS-27-FMEZ
NS-29-FMEZ
NS-30-FMEZ
NS-32-FMEZ
S-120-FMEZ
S-158P-FMEZ
S-210-FMEZ
S-215-FMEZ
T-4E100-FMEZ
T-55E125-FMEZ
T-65E150-FMEZ
T-8M150-FMEZ
T-1P100-FMEZ
T-2P125-FMEZ
1B-FMEZ
4-150-A-FMEZ
7-C19A-FMEZ
7-C29A-FMEZ
7-C39A-FMEZ
7-F-25-FMEZ
10-6X7N-FMEZ
10-8X9N-FMEZ
10-10X11N-FMEZ
10-12X13N-FMEZ
10-14X15N-FMEZ
10-16X17N-FMEZ
Description
1/2” IMPACT SOCKET 8 MM
1/2” IMPACT SOCKET 9 MM
1/2” IMPACT SOCKET 10 MM
1/2” IMPACT SOCKET 11 MM
1/2” IMPACT SOCKET 12 MM
1/2” IMPACT SOCKET 13 MM
1/2” IMPACT SOCKET 14 MM
1/2” IMPACT SOCKET 15 MM
1/2” IMPACT SOCKET 16 MM
1/2” IMPACT SOCKET 17 MM
1/2” IMPACT SOCKET 18 MM
1/2” IMPACT SOCKET 19 MM
1/2” IMPACT SOCKET 21 MM
1/2” IMPACT SOCKET 22 MM
1/2” IMPACT SOCKET 23 MM
1/2” IMPACT SOCKET 24 MM
1/2” IMPACT SOCKET 27 MM
1/2” IMPACT SOCKET 29 MM
1/2” IMPACT SOCKET 30 MM
1/2” IMPACT SOCKET 32 MM
1/2” SLIDING T-HANDLE DRIVE 280 MM
120-TOOTH 1/2” PUSH RATCHET WITH REVERSING
LEVER
1/2” EXTENSION BAR 125 MM
1/2” EXTENSION BAR 250 MM
ELECTRICIAN’S BI-MATERIAL SLOTTED
SCREWDRIVER 4X100
ELECTRICIAN’S BI-MATERIAL SLOTTED
SCREWDRIVER 5.5X125
ELECTRICIAN’S BI-MATERIAL SLOTTED
SCREWDRIVER 6.5X150
ELECTRICIAN’S BI-MATERIAL SLOTTED
SCREWDRIVER 8X150
BI-MATERIAL SCREWDRIVER S1 PH No. 1 5X100
BI-MATERIAL SCREWDRIVER S1 PH No. 2 6 X125
EXTRA FLAT CHISEL
PRECISION CAPE CHISEL
SHORT DRIFT PUNCH 1.9 MM
SHORT DRIFT PUNCH 2.9 MM
SHORT DRIFT PUNCH 3.9 MM
NAIL PUNCH 2.5 MM
OPEN-END WRENCH 6X7 MM
OPEN-END WRENCH 8X9 MM
OPEN-END WRENCH 10X11 MM
OPEN-END WRENCH 12X13 MM
OPEN-END WRENCH 14X15 MM
OPEN-END WRENCH 16X17 MM
Price €
12,80
12,80
12,80
12,80
12,80
12,80
13,80
13,80
13,80
14,10
14,10
14,10
14,50
14,50
15,10
15,10
16,10
19,50
19,50
19,50
16,10
38,50
12,90
14,10
9,70
10,40
10,90
12,50
10,60
11,40
14,40
13,60
11,10
11,15
11,20
10,10
9,40
9,50
9,60
9,80
10,50
10,60
Sales reference
10-18X19N-FMEZ
10-20X22N-FMEZ
10-21X23N-FMEZ
10-24X27N-FMEZ
10-25X28N-FMEZ
10-30X32N-FMEZ
50N-8-FMEZ
50N-9-FMEZ
50N-10-FMEZ
50N-11-FMEZ
50N-12-FMEZ
50N-13-FMEZ
50N-14-FMEZ
50N-15-FMEZ
50N-16-FMEZ
50N-17-FMEZ
50N-18-FMEZ
50N-19-FMEZ
50N-20-FMEZ
50N-21-FMEZ
50N-22-FMEZ
50N-23-FMEZ
50N-24-FMEZ
50N-25-FMEZ
50N-26-FMEZ
50N-27-FMEZ
50N-28-FMEZ
50N-29-FMEZ
50N-30-FMEZ
50N-32-FMEZ
50N-34-FMEZ
50N-35-FMEZ
50N-36-FMEZ
50N-38-FMEZ
54-8-FMEZ
67-PT2-FMEZ
67-PT2,5-FMEZ
67-PT3-FMEZ
67-PT4-FMEZ
67-PT5-FMEZ
67-PT6-FMEZ
67-PT8-FMEZ
67-PT10-FMEZ
94-SD8-FMEZ
94-SD9-FMEZ
Description
OPEN-END WRENCH 18X19 MM
OPEN-END WRENCH 20X22 MM
OPEN-END WRENCH 21X23 MM
OPEN-END WRENCH 24X27 MM
OPEN-END WRENCH 25X28 MM
OPEN-END WRENCH 30X32 MM
COMBINATION WRENCH 8 MM
COMBINATION WRENCH 9 MM
COMBINATION WRENCH 10 MM
COMBINATION WRENCH 11 MM
COMBINATION WRENCH 12 MM
COMBINATION WRENCH 13 MM
COMBINATION WRENCH 14 MM
COMBINATION WRENCH 15 MM
COMBINATION WRENCH 16 MM
COMBINATION WRENCH 17 MM
COMBINATION WRENCH 18 MM
COMBINATION WRENCH 19 MM
COMBINATION WRENCH 20 MM
COMBINATION WRENCH 21 MM
COMBINATION WRENCH 22 MM
COMBINATION WRENCH 23 MM
COMBINATION WRENCH 24 MM
COMBINATION WRENCH 25 MM
COMBINATION WRENCH 26 MM
COMBINATION WRENCH 27 MM
COMBINATION WRENCH 28 MM
COMBINATION WRENCH 29 MM
COMBINATION WRENCH 30 MM
COMBINATION WRENCH 32 MM
COMBINATION WRENCH 34 MM
COMBINATION WRENCH 35 MM
COMBINATION WRENCH 36 MM
COMBINATION WRENCH 38 MM
ADJUSTABLE WRENCH 8”
SPHERICAL HEAD HEX KEY HANDLE L 2 MM
SPHERICAL HEAD HEX KEY HANDLE L 2.5 MM
SPHERICAL HEAD HEX KEY HANDLE L 3 MM
SPHERICAL HEAD HEX KEY HANDLE L 4 MM
SPHERICAL HEAD HEX KEY HANDLE L 5 MM
SPHERICAL HEAD HEX KEY HANDLE L 6 MM
SPHERICAL HEAD HEX KEY HANDLE L 8 MM
SPHERICAL HEAD HEX KEY HANDLE L 10 MM
6 POIN T PASS THROUGHSOCKET WRENCH 8 MM
6 POINT PASS THROUGH SOCKET WRENCH 9 MM
Price €
11,20
11,80
11,80
13,50
13,70
16,50
11,05
11,10
11,20
11,40
11,50
11,80
11,90
12,60
12,90
13,50
13,90
14,20
15,00
15,20
15,40
15,90
16,70
17,30
17,90
18,40
18,90
19,40
20,30
20,70
28,70
30,60
31,00
33,10
19,70
10,70
10,80
10,90
10,80
11,20
11,60
12,30
13,60
11,50
11,60
SELECTION OF TOOLS SOLD WITH CLIPS
T-4E100-FMEZ
310-…TM-FMEZ
T-1P100-FMEZ
204-R18G-FMEZ
201-25B-FMEZ
80
50N-…-FMEZ
232-R16G-FMEZ
Sales reference
94-SD10-FMEZ
94-SD11-FMEZ
94-SD12-FMEZ
94-SD13-FMEZ
94-SD14-FMEZ
94-SD15-FMEZ
94-SD16-FMEZ
94-SD17-FMEZ
94-SD18-FMEZ
94-SD19-FMEZ
94-SD20-FMEZ
94-SD21-FMEZ
94-SD22-FMEZ
94-SD23-FMEZ
94-SD24-FMEZ
94-SD25-FMEZ
94-SD26-FMEZ
105-6X7-FMEZ
105-8X9-FMEZ
105-10X11-FMEZ
105-12X13-FMEZ
105-14X15-FMEZ
105-16X17-FMEZ
105-18X19-FMEZ
105-20X22-FMEZ
105-21X23-FMEZ
201-25B-FMEZ
Description
6 POINT PASS THROUGH SOCKET WRENCH 10 MM
6 POINT PASS THROUGH SOCKET WRENCH 11 MM
6 POINT PASS THROUGH SOCKET WRENCH 12 MM
6 POINT PASS THROUGH SOCKET WRENCH 13 MM
6 POINT PASS THROUGH SOCKET WRENCH 14 MM
6 POINT PASS THROUGH SOCKET WRENCH 15 MM
6 POINT PASS THROUGH SOCKET WRENCH 16 MM
6 POINT PASS THROUGH SOCKET WRENCH 17 MM
6 POINT PASS THROUGH SOCKET WRENCH 18 MM
6 POINT PASS THROUGH SOCKET WRENCH 19 MM
6 POINT PASS THROUGH SOCKET WRENCH 20 MM
6 POINT PASS THROUGH SOCKET WRENCH 21 MM
6 POINT PASS THROUGH SOCKET WRENCH 22 MM
6 POINT PASS THROUGH SOCKET WRENCH 23 MM
6 POINT PASS THROUGH SOCKET WRENCH 24 MM
6 POINT PASS THROUGH SOCKET WRENCH 25 MM
6 POINT PASS THROUGH SOCKET WRENCH 26 MM
DOUBLE BEND RING WRENCH 6X7 MM
DOUBLE BEND RING WRENCH 8X9 MM
DOUBLE BEND RING WRENCH 10X11 MM
DOUBLE BEND RING WRENCH 12X13 MM
DOUBLE BEND RING WRENCH 14X15 MM
DOUBLE BEND RING WRENCH 16X17 MM
DOUBLE BEND RING WRENCH 18X19 MM
DOUBLE BEND RING WRENCH 20X22 MM
DOUBLE BEND RING WRENCH 21X23 MM
BI-MATERIALPUSH BUTTON MULTIGRIP PLIERS
BI-MATERIAL SPRING LOADED UNIVERSAL
204-R18G-FMEZ
PLIERS 185 MM
LARGE JAW LOCK GRIP PLIERS 250 MM
212-25-FMEZ
BI-MATERIAL SPRING LOADED DIAGONAL CUTTING
232-R16G-FMEZ
PLIERS 165 MM
BI-MATERIAL HALF ROUND NOSE PLIERS 160 MM
237-16G-FMEZ
NUT DRIVER 5.5 MM
292P-5,5-FMEZ
NUT DRIVER 6 MM
292P-6-FMEZ
NUT DRIVER 7 MM
292P-7-FMEZ
NUT DRIVER 8 MM
292P-8-FMEZ
NUT DRIVER 9 MM
292P-9-FMEZ
NUT DRIVER 10 MM
292P-10-FMEZ
310-36TM-FMEZ SAMSOPLUS RIVETING HAMMER
310-42TM-FMEZ SAMSOPLUS RIVETING HAMMER
MALLET WITH VARNISHED ASH HANDLE 32 MM
320-32D-FMEZ
STRAIGHT CUTTINGMETAL SHEARS
327-25-FMEZ
LONG FEELER GAUGE
770-L-FMEZ
310-32TM-FMEZ SAMSOPLUS RIVETING HAMMER
DEAD BLOW MALLET 38 MM
322-38-FMEZ
PRECISION CAPE CHISEL
4-200-A-FMEZ
CENTRE PUNCH 6 MM
8N-6A-FMEZ
SAMSOCUT BI-MATERIAL HACKSAW
791-FMEZ
HACKSAW FRAME
794-FMEZ
BIMATERIAL TAPE MEASURE 3M X 16 MM
UB-316-FMEZ
BIMATERIAL TAPE MEASURE 5M X 19 MM
UB-519-FMEZ
BIMATERIAL TAPE MEASURE 8M X 25 MM
UB-825-FMEZ
BIMATERIAL TAPE MEASURE 10M X 25 MM
UB-1025-FMEZ
LONG SEMI-RIGID STAINLESS STEEL RULER,
781-40R-FMEZ
1-SIDED
BI-MATERIAL SELF-RETRACTING KNIFE ZAMAC
378-40-FMEZ
BODY, TRAPEZOIDAL BLADES.
90° TRY SQUARE 150X100 MM
E4-150-FMEZ
ROUND SMOOTH-CUT FILE WITH HANDLE 150 MM
LR-15-DE-FMEZ
SEMI-SMOOTH-CUT FILE WITH HANDLE
LPM-15-ME-FMEZ FLAT
150 MM
TRIANGULAR SEMI-SMOOTH-CUT FILE WITH
LT-15-ME-FMEZ
HANDLE 150 MM
Price €
11,80
12,00
12,50
12,60
13,50
13,90
14,30
14,60
16,10
16,30
17,00
18,60
19,40
20,00
20,50
21,50
22,90
12,90
13,30
13,70
14,00
15,20
15,55
16,40
16,90
17,70
25,80
18,90
36,80
22,00
20,50
14,60
14,60
15,60
16,50
16,90
17,80
19,20
22,90
23,80
42,40
28,20
18,10
47,40
15,10
10,00
25,00
18,00
12,30
15,80
18,90
20,30
183,50
16,10
132,10
13,95
13,60
13,90
INDISPENSAM
NE
W
WASHABLE
Foam washable at
60°C.
EXAMPLE OF COMPLETE
ROLLER CABINET
DESIGNED FOR THE MAJOR
ENERGY STAKEHOLDERS IN
FRANCE.
FACILITY
The stepped machining of the foam
means you can remove the tool by
just pressing on one of its ends.
SAFETY
CPP-125-FMEZ
ROLLER CABINET
+ 125 TOOLS IN MODULES
IF YOU HAVE A SPECIFIC REQUEST?
WE CAN PROPOSE YOU A FULLY BESPOKE EQUIPPED ROLLER CABINET
AS WELL AS OTHER BESPOKE SERVICES.
FIND OUT MORE BY CONTACTING OUR TAILOR MADE TOOL DEPARTMENT:
0(/.%s%-!),/30 3!-%5
With the bi-color foam and precision
cutting to the shape of the tool, you can
check all your tools are there at a glimpse.
CONVENIENT
The tools fitted with the FME clip fit snugly
into the foams and are immediately ready
to be fitted to the belt, cord or lanyard
developed by SAM
SAM SERVICE:
if you wish to receive your tool
fitted with the FME clip, SAM
offers you a paid service for the
assembly in our factory.
81
CONSTRUCTION
www.sam.eu
PATE NT SAM
SAMTITAN
BOLT CUTTER
CB-2-AT
STANDARD BOLT CUTTER
TUBE ARMS
L-95-2
ROBUSTNESS
Fully forged arms to
resist construction site
extreme conditions.
Possible straightening
possible in case of
accidental torsion.
COMFORT :
Sheathed handes.
AXIAL CUTTING
Cutting angle designed
to penetrate and set
cut steel up to 140 kg
/ mm2.
Réf.
C1 60
Kg/mm2
C2 80
Kg/mm2
C3 110
Kg/mm2
12
11
9
L-95-2
IAL
EC
MECHANIC’S END NIPPERS 250 MM
ION
CT
ELE
SP
S
CB-2-AT
e
mm
L
mm
8
102
155
750
30”
3,6
CB-2-AL
8
102
155
760
30"
4,1
CB-2-AL
L"
Weight
Kg
Blades
605-R
Cutting capacity for hard steel
thread : 3 mm
Length : 250 mm
Weight: 320g
Swivel hinge. Folding handles.
Padlock closure (not supplied,
available in page 454 of catalogue SF4).
Dimensions: 440 x 200 x 200 mm.
7 HEXAGON KEYS
59-MP8Z
62-MP7Z
: 9 - 10 - 15 - 20 - 25 - 27 - 30 - 40 mm.
: 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
PRACTICAL
« PUSH BUTTON » TO AUTOMATICALLY EXIT THE KEYS
82
E
mm
5 TRAY TOOL BOX
229-25Z
8 RESISTORX® KEYS
C4 140
Kg/mm2
8 TORX® KEYS
66-MP8Z
: 9 - 10 - 15 - 20 - 25 - 27 - 30 40 mm.
INDISPENSAM
DOUBLE BACK SPIRIT LEVEL, GROUND BACK
VISIBILITY
3 vials: horizontal,
vertical and 45°.
L mm
165-40Z
400
165-50Z
500
165-60Z
600
165-80Z
800
165-100Z
1000
165-150Z
1500
165-200Z
2000
PRECISION
To read verticality regardless
of your position.
Internal mirror
at 45°.
0,5 mm / m.
Front reading.
Side reading.
CONVENIENT
Grip for firm hold. Carrying and
vertical levelling made easy.
IAL
ION
C
PE
CT
ELE
S
S
CONSTRUCTION 1/2”
RATCHET
CONSTRUCTION 1/4”
RATCHET
72
R-157BZ
POCKET LIGHT SET OF 39 X 1/4” TOOLS,
SITE RATCHET VERSION
5
S-157B
5°
-1 4
PRICE
DOWN
mm
73-RC39Z
RESISTANT
Protection of ratchet from water
and sand intrusion
PRACTICAL
Reversing lever for changing
the direction of rotation with
one hand.
- 1 bit holder
socket 1/4”
- Package dimension:
148 x 89.5 x 46.7 mm.
PRACTICE:
- Integration of an LED lamp
(rechargeable battery)
in the box.
- 32 m
m
8
1/2’’ SOCKETS AND ACCESSORIES SET WITH
CONSTRUCTION RATCHE
3x Slotted 4,5 - 6,5 - 8 mm.
- 3 x n°1 - 2 - 3.
- 3 x n°1 - 2 - 3.
- 5 x 3 - 4 - 5 - 6 - 7 mm.
- 7 x 10 - 15 - 20 - 25 - 27 - 30 - 40.
- 1 construction ratchet 1/4”
- 1 fitted extension 1/4”
- 1 extension 1/4” 50 mm
- 1 extension 100 mm
- 11 sockets 1/4” : 5 - 5,5
- 6 - 7 - 8 - 9 - 10 - 11 12 - 13 - 14 mm.
- 1 universal Joint 1/4”
- 1 sliding handle 1/4”
75-SHC23Z
1 x 1/2” construction ratchet
- 2 x 1/2” extension 125 mm /
250 mm / standard universal
joint
- Hex sockets: 8-9-10-11-1213-14-15-16-17-18-19-21-2223-24-2730-32
RESISTANT
protection of ratchet from water and
sand intrusion
RESISTANT
1 construction ratchet
IAL
C
PE
S
ION
CT
ELE
S
83
PLUMBING
www.sam.eu
MINI COPPER
AUTOMATIC PIPE CUTTER
620-10Z
622-AZ
With two
grooved-rollers.
• With deburring punch.
• Effective with small
footprint.
With automatic roller return.
• With four grooved-rollers.
• In aluminium.
• With locking system.
SLIDE -TYPE PIPE CUTTER
CONVENIENT
620-11
For copper tube and aluminum.
Capacity: 3 to 30 mm.
PIPE CUTTER
620-12
For copper tube and aluminum.
Capacity: 3 to 30 mm.
PIPE CUTTER, 26 MM
618-P-26
For plastic materials and PVC.
Clean cut.
CONVENIENT
Rotary deburrer
COMFORT
STAINLESS STEEL
PIPE CUTTER 3 TO 35 MM
Anti finger pinching pliers.
AVAILABLE:
620-13Z
With 4 grooved rollers to guide the pipe and cut flush
with the t.
Entirely removable deburrer.
Spare cutter wheel inside the handle.
MARCH
PIPE WRENCH THIS VICE CAN BE FIXED ON A
WORKBENCH OR A TABLE FITTER.
STILLSON MODEL
632-18
Length : 440 mm.
Opening : 60 mm.
PRACTICAL
Instant changing of cutter
wheel, no tools required.
W
E
N
84
INDISPENSAM
4.9 MM VIDEOSCOPE WITH ANGLE DRIVE
344-24
Easy inspection at any time, in all
circumstances. Detachable cable
(IP67). LE D with dimmer light
sources (0-275Lux/4cm) extra-large
3.5” TFT screen. Quick save of videos
and snapshots 1.5x zoom.
Innovative function « vertical
symmetry » (reverse image). 1GB
Memory Card can hold more than
25 000 photos or videos.
5.5 MM VIDEOSCOPE
344-23
VIDEOSCOPE
WITH 22 M
INSPECTION CABLE
344-30Z
LP68 quality camera (28mm) with 8
LED
Semi-rigid cable 22m (6mm
diameter / IP65)
Depth of field: 10mm to infinity
Angle of view: 150 °
Can penetrate up to two consecutive
90°elbows
Applications: building construction,
air conditioning and heating,
aerospace, water pipes, plumbing,
welding, general equipment (tanks,
steel pipes), armaments industry ...
Delivered with SD card, video cable,
USB cable.
Easy inspection at any time, in all
circumstances. Detachable cable
(IP67). LED with dimmer light sources
(0-275Lux/4cm) extra-large 3.5’’ TFT
screen. Quick save of videos and snapshots
1.5x zoom. Innovative function «vertical
symmetry» (reverse image). 2GB Memory
Card can hold more than 25 000 photos
or videos. Power battery (4 hours of
autonomy). Motherboard connector and
grommet for cord improved.
FOLDING TABLE FOR PLUMBER
L
TM-1Z
Dimensions:
1080 x 640 x 35 mm.
WOODEN tray with metal
frame
Transport simple : flange to
hold the legs folded
STABILITY
THANKS TO
LARGE BASE
CIA
ON
TI
LEC
E
SP
SE
TAP NUT WRENCH + 7 SOCKETS BOX
PB-8Z
Details: 1 tap nut wrench + 7 sockets: 9,
10, 11, 12, 13, 14, 17 mm.
Hollow socket for hex nuts of 13 mm.
RESISTANCE
800 kg
ACCESSIBILITY
Compact size to access nuts
that are hard to access.
HINGED VICES
399-T3
CONVENIENT
Sockets and hollow arm
so as not to be hindered by
threaded rods.
Hinged vices For the tubes screwing
of diameter from 10 to 89 mm.
This vice can be fixed on a
workbench or a table fitter.
85
WORK ON WOOD AND PLASTER-BASED MATERIALS
ONE HANDED AUTOMATIC CLAMP
COMFORT
150 mm.
Protection provided by soft clamping jaw to parts to be
clamped. Comfortable handle. The non-slip pads do not
mark surfaces.
455-150Z
www.sam.eu
300 mm.
455-300Z
CONVENIENT
Used with one
hand.
450 mm.
455-450Z
600 mm.
455-600Z
915 mm.
455-915Z
SAFETY
Lock/release button.
Robust build for increased service life.
IAL
C
PE
S
S
HANDSAW FOR PLASTER
BOARDS
SPECIAL KEYHOLE SAW
FOR PLASTER BOARDS
B-747Z
B-748Z
7 teeth per inch specially for plaster
boards. Treated teeth.
Treated blade. Screwed bimaterial
handle for left and right hand cutting.
Handle allows for marking at 45°
and 90°.
Length: 550 mm.
7 teeth per inch specially for plaster
boards. Treated teeth.
Pointed tip and pad at end to
facilitate penetration
of blade into plaster boards.
Bimaterial handle.
Length: 310 mm
7 teeth
/ inch
7 teeth
/ inch
THIN CUT HANDSAW
11 teeth per inch. Swedish quality steel blade, 0.85 mm thick.
High performance teeth: hardened for very long-lasting sharpness.
Screwed bimaterial handle for left and right hand cutting.
Handle allows for marking at 45° and 90°.
400 mm.
B-741-4Z
450 mm.
B-741-45Z
500 mm.
B-741-5Z
86
ION
CT
ELE
11 teeth
/ inch
INDISPENSAM
JOINER’S END NIPPERS 250 MM
245-25Z
Forged chrome vanadium steel. Lacquered finish
Sharpened edge
Cutting capacity for thread rope piano: 2 mm
Length : 250 mm
Weight: 449g
PLANE WITH CAST IRON BASE
B-303-T
Plastic handle. Length: 240 mm.
Weigth: 56mm
CONVENIENT
Adjustment of cutter
depth by wheel.
SCULPTOR’S CHISEL SET
KNIFE FOR ELECTRICIAN
370-1Z
Plastic handle.
Length: 170 mm.
Weight: 110g
B-607-C6
Set of 6 sculptor’s chisel
wood handel
B-607-6 B-607-10 B-60712 B-607-15 B-607-20
B-607-25.
TRY SQUARE, STEEL BLADE 300 MM
774-A-30
Black engraved square.
3 RASPS WITH HANDLE SET
BR-3JZ
FALSE SQUARE
1 flat rasp 250 mm,
1 round rasp 250 mm,
1 half-round rasp 250 mm.
Bi-material handle
775-1Z
For the deferral of angles
with locking wing screw
Steel blade, wooden heel
Width of the handle : 17mm
Dimensions: L260xW17xH27mm
87
www.sam.eu
SELF-CONTAINED
ENERGY & POWER
MULTI-TRADE
INNOVATION
AM
TS
PATE N
LONGER
OPERATING TIMES
The PEA system is designed to offer the best
operating times. The high pressure of the air in the
cylinder, combined with a low-consumption machine
will guarantee you the best working times.
SUITABLE FOR USE
IN ANY CLIMATE
From -20°C to +60°C, come rain , snow or shine,
and even in hostile environments, the PEA will always
provide your air tools with the same amount of power.*
ALREADY 300 CYLINDERS
SOLD!
* Take into account the air tool’s operating temperature range.
88
INDISPENSAM
Air tools
Hose with
anti-whiplash
system
6.5 bar outlet
pressure
Quick coupling
300 bar cylinder
TE
R
T
IN
E
IV
OPERATION
FL
A
LOOS E N
The PEA is the solution that will
provide you with power for all your
pneumatic applications. The PEA
system is simple to set up and consists
of three parts:
- A cylinder of compressed air at
300 bar.
- A regulator providing an outlet
pressure of 6.5 bar;
- A flexible hose with a quick coupling.
Simply connect your pneumatic device
and you can begin work, with the
freedom to move around as you wish.
MOBILITY GUARANTEED
Go anywhere. Whatever
the terrain, the largewheeled PEA will carry
your 9 litre cylinder
wherever you want to go.
d
An
PEA TROLLEY
so
m
uc
hm
ore
…
NAI L/ STAPLE
PORTABILITY GUARANTEED
PEA roller
cabinet
Ideal for moving around
your workshop. No more
hoses trailing across the
floor. With two 9 litre
cylinders to hand, you will
have enough power in
reserve to complete any
job anywhere.
PEA holster
PEA backpack
Enables you to carry a
2 litre PEA cylinder so
that you can use your air
tools in a confined space
or spot where access is
difficult.
Designed to carry a 9 litre
cylinder, the backpack
gives you a longer
working time away from
other energy sources, in
isolated areas or hostile
environments.
89
SELF-CONTAINED
ENERGY & POWER
www.sam.eu
The power of the
PTS range
À 300 Nm
À 600 Nm
0
40
PNEUMATIC IMPACT
WRENCH (1148)
200
25
500
240
IMPACT WRENCH
WITH LITHIUM BATTERY
À 900 Nm
NUMBER OF LOOSENING OPERATIONS
Advantages of PEA
POWER
SOURCE. FREES you from
900 Nm
1
0
The benefit of your own
reliance on fixed air networks or electricity.
MAXIMAL TORQUE REACHED AT -20°C
LONGER OPERATION
COMFORT
Work in greater
undisturbed by a noisy compressor.
3
STORAGE
over an unlimited period. With the
cylinder valve closed, there is no loss of pressure or power.
4
WIDE RANGE
OF AIR TOOLS thanks to the universal hose
Access a
connector.
5
EASY MOBILITY
Enjoy
thanks to an
optimised size/weight ratio and a wide
range of transport options.
90
+10
or
+70
+500
+1100
+1500
CAR TYRES COMPLETELY
INFLATED
0.3 BAR TOP-UPS
LOOSENINGS OF NUTS
TIGHTENED TO 300 NM or 25
complete vehicles.
70 MM NAILS HAMMERED
IN 360 m_ of batten** fixed.
RIVETS SET or 750 vehicle
number plates fixed.
* Results obtained in a laboratory under normal conditions of use using tools from the range
** Battens: small-section wooden battens used mainly by roofers to fix tiles or slates.
2
INDISPENSAM
BETTER PRODUCTIVITY
And it’s you that says so!
With a 2 litre and a 9
litre cylinder to choose
from, I can choose what
suits my application
best, whilst also taking
into account the amount
of space taken up by my
equipment.
With the PEA, my team
are having a lot less time
off work! My workers no
longer complain about
the noise, weight and
handling of their old tools.
AUTONOMY
SAFETY
The air consumption of pneumatic tools is optimised with the PEA system thanks
to the use of hoses adapted to the air flow of the tools. By carefully combining
your hoses and tools, you can increase your working time with your PEA air
cylinder up to double.
Using the PEA can reduce MSDs* linked to the use of heavy and noisy machinery.
As the PEA system generates 0 dB, only the weight and noise of the pneumatic
machine itself need to be taken into consideration.
The system’s tailored regulator adapts to all air tools operating with a supply
pressure of 6.5 bars.
In addition, with a transportable cylinder, the number of hoses or cables trailing on
the ground is reduced, limiting the risk of tripping and falling.
With the PEA I can use
the power of all my air
tools with the same
cylinder thanks to the
universal hose connector.
And the trolley makes the
whole system extremely
easy to transport: I can
even lie
With the PEA, I’ve been
able to save up to an
hour and a half a day per
worker! The PEA system
can be started almost
instantly, compared to
the time it takes to set
up a compressor, what’s
more often only for one
application.
down on the ground and
work with the bottle laid
flat to get underneath my
vehicles.
FASTER INTERVENTIONS
USE
The PEA system can be compared to a global solution enabling you to optimise
your productivity. With the limited time it takes to set up and easy operation, you
can get to work on your jobsite more quickly and optimise your productivity.
The PEA system is easy to handle and transport thanks to its optimised size and
weight, making the operator more efficient in his work. He can work just about
anywhere with the right accessories (holster, backpack, trolley, roller cabinet …).
* MSDs: Musculoskeletal disorders
91
SELF-CONTAINED
ENERGY & POWER
www.sam.eu
CREATE YOUR OWN APPL
REGULATOR AND HOSES
TOTAL FREEDOM WITH PEA!
Fill your own cylinders with the
PEA compressor!
PEA-DET1
REGULATOR
NEW
The essential item in the PEA system.
This pressure-reducing regulator
provides the outlet pressure of 6.5
bars, required by most air tools, with
a regulated flow rate ranging between
400 and 500 l/min (from 300 to 40 bars)
with no pressure drops. Meets standard
EN ISO 2503.
OPTIMISE
Your air consumption!
PEA-COMP1Z
PEA ELECTRIC CYLINDER FILLING COMPRESSOR
300 BAR
92
SERVI-PEA
PEA-FLEX12
PEA-FLEX14
100L/MIN
Ideal for nailer, stapler
or rivet gun. Perfect for
pneumatic tools fitted with
cylinder actuator.
PEA-FLEX1XZ
PEA MULTI-FLUX HOSE
PEA 3-in-1 hose: 100,
200 and 400 l/min
flow rates possible
with a single hose.
Select the flow rate
by turning the ring on
the quick coupling.
This high pressure air compressor is the indispensable tool that will
make you totally self-sufficient. It can be used to fill both 2 and 9 litre
bottles. Its handles and compact size make it easy to transport. It also
includes an automatic purge and stop system, making it completely
self-contained. Air flow rate: 100 l/min - 6 m_/h. Working pressure:
300 bar. Power supply: 230V / 50Hz – Single phase - Electric motor:
2.2 KW - Working temperature: -5°C to +45°C.
Length - 580 mm. Width - 410 mm. Height - 410 mm. Weight: 42.5 kg.
PEA-CHAR1
PEA-FLEX11
PEA-BAG2L
AVAILABLE:
APRIL
PEA-BAG9L
PEA TROLLLEY*
PEA ROLLER CABINET*
PEA HOLSTER
PEA BACKPACK*
Trolley equipped with:
1 handle. 2 large transport wheels
ø 200mm. 2 casters for use in in
horizontal position, diam. 50mm.
1 cylinder retaining strap.
Width 420 mm. Depth: 360 mm.
Height: 905 mm. Weight: 8 kg.
40 SERIES roller cabinet with
anti-tipping system
Withstands a 950 kg load when static.
Load per drawer: 30 kg.
Fastens on the left or right leg.
Abdominal belt.
Bottle retaining system.
Quick connect fastening system.
Weight when full: 4 kg.
Suitable for a left-handed or a righthanded user.
Polycarbonate protective shell.
Flexible fastening clip.
Adjustable abdominal and back straps.
Aerated back.
Weight when full: 12.5 kg.
*Supplied without cylinders.
INDISPENSAM
CATION
SAM PROVIDES A 10-YEAR WARRANTY
9 L CYLINDER PEA
TROLLEY SERVICE PACK
9L CYLINDER PEA
BACKPACK SERVICE PACK
PEA-PACK1-9L
PEA-PACK1-2L
PEA-PACK1-2L 1170€
PEA-PACK2-9L
1 full 9L cylinder supplied (PEA-BOUT93)
with 10 year WARRANTY PACK
- 1 pressure reducing valve (PEA-DET1)
- 1 hose (PEA-FLEX…)
2 L CYLINDER PEA
HOLSTER SERVICE PACK
1 full 9L cylinder supplied (PEA-BOUT93)
with 10 year WARRANTY Pack
- 1 pressure reducing valve (PEA-DET1)
- 1 hose (PEA-FLEX…)
1 full 2L cylinder supplied (PEA-BOUT23)
10 year WARRANTY PACK
- 1 holster (PEA-BAG2L)
- 1 pressure reducing valve (D161PEA-DET1)
- 1 hose (PEA-FLEX…)
ADDITIONAL BOTTLES PER UNIT FOR PACK SERVICE.
Different offers for cylinders.
provides a
SAM 10-year
warranty:
sstandard exchange of empty cylinders
for full ones at all approved SAM
dealers.
sfree maintenance of cylinders.
sPeriodic inspection of cylinders.
2 L CYLINDER 10-YEAR
WARRANTY PACK
PEA-BOUT23
PEA-BOUT93
Decompressed volume: 538 litres.
(including 1st fill of gas).
- outside diameter: 101 mm.
- Length without valve: 386 mm.
-Weight with empty 1,5 kg
- Service life: 15 years.
- Type 3 cylinder.
-Weight when full 3kg
ANNUAL RENTAL
DURATION: 1 YEAR
PEA-LOC231
DURATION: 3 YEARS
PEA-LOC233
2 L CYLINDER REFILL
/ YEAR
DURATION: 3 YEARS
/ YEAR
DURATION: 5 YEARS
PEA-LOC235
PEA-LOC931
PEA-LOC933
PEA-LOC935
PEA-REC23
9 L CYLINDER REFILL
/ YEAR
DURATION: 5 YEARS
/ YEAR
Decompressed volume: 2462 litres.
(including 1st fill of gas).
- outside diameter: 173 mm.
- Length without valve: 386 mm.
-Weigth when empty: 4,8kg
- Service life: 15 years.
- Type 3 cylinder.
-Weight when full 9,5 kg
REFILL YOUR PEA CYLINDERS.
DURATION: 1 YEAR
/ YEAR
9 L CYLINDER 10-YEAR
WARRANTY PACK
/ YEAR
PEA-REC93
To refill your PEA cylinders, simply take
your empty cylinder to your PEA distributordealer and swap it for a full one.
93
PNEUMATIC
www.sam.eu
1’’ LONG SHANK IMPACT
WRENCH
RECOMMENDED TOOLS
ULTRA-COMPACT 1/2’’
IMPACT WRENCH
1/2’’ IMPACT WRENCH
1148
1148M
1181S-200
3/4’’ IMPACT WRENCH
1163
Ultra-compact, lightweight and
ergonomic impact wrench.
Enables you to work in difficultto-access places in assembly and
maintenance.
The bi-material housing makes
this a comfortable wrench to use,
much appreciated by users.
Easy-to-use forward/reverse push
button and torque control.
Wrench with an exceptional
weight/power/consumption ratio.
Excellent ergonomics, suitable
for repetitive use in medium duty
mechanical jobs.
Ideal with a 200l/min hose.
Ideal with a 200l/min hose.
Ideal with a 400 l/min hose.
Lightweight, compact and powerful
impact wrench, perfect for working on
HGV and construction machinery.
Side exhaust with axial air supply to
avoid catching the hose.
Ideal with a 400l/min hose.
1181S-200
Ref.
1’’ LONG SHANK
IMPACT WRENCH
Title of item
PRICE
PRICE
DOWN
DOWN
Title of item
Max torque
(Nm)
Working
consumption
(l/min)
Number of nuts
loosened at 300 Nm
(with 9L cylinder)
Weight (kg)
1148M
ULTRA-COMPACT 1/2’’
IMPACT RENCH
500
130
300
1,350
1148
1/2’’ IMPACT WRENCH
1100
170
500
2,030
1163
3/4’’ IMPACT WRENCH
1200
210
520
2,60
Ref.
Tightening/
Loosening
IAL
S
Nailing
NAILER 45-90 MM
1844
Latest generation, easy to handle
nailer, single shot or rapid fire
operation.
Magazine holds up to 300
nails.
1842
Aluminium body.
Strip loading.
Bump firing.
Powerful and economical.
Ideal with a hose for 100l/min
Ref.
Title of item
1842
NAILER 15 - 50 MM
Consumption (l/stroke)
2,16
0,79
9L estimated number of nails
1000
2550
2L estimated number of nails
250
570
2,000
1,485
Weight (kg)
94
1844
NAILER 45-90 MM
MACHINES RECOMMENDED FOR PEA
RESULT OBTAINED IN A LABORATORY SETTING WITH THE PEA SYSTEM AND A 400 L/
MIN HOSE, IN NORMAL CONDITIONS OF USE. THESE PERFORMANCES DO NOT APPLY
TO OTHER ITEMS IN THE SAM GROUP OR OTHER BRANDS’ RANGES.
330
Number of nuts loosened at
1500 Nm (with 9L cylinder)
40
7,400
1/2’’ RATCHET WRENCH
1044
ION
CT
ELE
S
1/4” - 3/8” MINI PASS
THROUGH
RATCHET IN
MULTIFUNCTIONAL BOX
1020-91Z
10 x 1/4“ sockets (5.5-6-7-8-9-1011-12-13-14), 1 x 1/4“ reversible
manual ratchet, 1 extension 100mm,
1 universal joint 1 x 1/4“ handle, 1
1/4“ adapter, Resistorx® sockets
(T10-T15-T20-T25-T27-T30-T40,
4 hex socket (H3-H4-H6-H7),
2 Phillips® sockets n°1-n°2, 3
Pozidriv® socket n°1-n°2-n°3
4 slotted sockets 4-5.5-6.5-8,
1 pneumatic pass through ratchet,
1/4“-3/8’’.
Ideal with hose of
100l/min
Ideal with a 100 l/min
hose.
1500
Working consumption (l/min)
Weight (kg)
C
PE
NAILER 15 - 50 MM
Max torque (Nm)
Impact ratchet wrench with reactionless
double pin impact mechanism. Ergonomic
grip. Silenced rear exhaust. Digital torque/
speed control. The size of a standard
ratchet wrench and capable of tightening
components with difficult access. Ensures
appreciable time saving with optimum
comfort of use. The must-have tool
when up against modern mechanical
techniques and profitability
requirements.
Ideal with a hose
for 100l/min
Ref.
Title of item
1044
1020-91Z
1/2’’
RATCHET
WRENCH
1/4” - 3/8” MINI
PASS THROUGH
RATCHET IN
MULTIFUNCTIONAL BOX
Max torque (Nm)
110
40
Working
consumption (l/min)
230
290
Consumption
at no load (l/min)
235
315
Unscrewing
speed (mm/s)
20
13,3
Screwing speed
(mm/s)
Weight (kg)
20
20
1,280
0,520
FREE
FREE SET OF 8 X 1/4“IMPACT
SOCKETS,6 TO 13MM
INDISPENSAM
Stapler
Air gun
STAPLER
AIR GUN
1840
1852
Aluminium body. Strip loading.
Bump firing.
Ultra efficient with the PEA.
Low air consumption.
Ergonomic.
Ideal for fitting packing, insulation,
fabric and
lots of other products. Standardsized staples.
Ideal with a hose for 100l/min
Ref.
Short nose air gun, 130mm.
Ergonomic and robust air gun.
Lightweight and compact air gun
to help you in all your work.
Ideal with a hose for 100l/min
1840
Title of item
STAPLER
Consumption
(l/stroke)
0,396
9L staple
consumption
5050
Ref.
1852
Title of item
AIR
GUN
20
Distance of use (cm)
100
23
Max speed (m/s)
12L staple
consumption
1130
Working consumption (l/mn)
Weight (kg)
0,900
Weight (kg)
6,5
295 - 305
0,140
Drill
10MM DRILL
WITH AUTOMATIC CHUCK
FREE
1700-1Z
FREE SET OF
13 HSSDRILL
BITS
Aluminium housing.
Ergonomic grip.
Directable bottom exhaust.
Variable speed trigger to adapt to all
types of drilling up to 10mm.
Ref.
Ideal with a hose for 400l/min
Rivet gun
RIVET GUN
1845
1700-1Z
Ref.
1845
Title of item
RIVET GUN
Consumption
(l/stroke)
1,25
9L estimated
number of rivets
1600
12L estimated
number of rivets
360
Weight (kg)
Title of item
Consumption
(l/stroke)
Total drilling length
with 9LCYL
(m)
Weight (kg)
10MM DRILL WITH
AUTOMATIC CHUCK
265
820
1,075
Screwing
AJUSTABLE, REVERSIBLE
SCREW GUN 1800 RPM
1750G
1,450
Ref.
Title of item
1750G
AJUSTABLE,
REVERSIBLE
SCREW GUN 1800
RPM
Working consumption (l/mn)
266
Consumption at no load (l/mn)
285
9L screw consumption
nbr of screws
128
Weight (kg)
Ergonomic aluminium body. Air/
hydraulic cylinder. Bump firing.
Supplied with nose pieces for
2.4 - 3.2 - 4 - 4.8 rivets. Efficient.
The model with case allows for
organised storage of accessories and
maintenance parts. des accessoires
et des pièces de maintenance.
Ideal with a hose for 100l/min
Extrusion gun
2-IN-1 EXTRUSION GUN
1860-2
Aluminium body. Variable speed
trigger. Decompression on stop
position. For cartridges and bags of
310/400 ml / 215x50.
Length: 325 mm.
Air piston.
Weight: 1,3 g
1/4” coupling.
1,545
External ring torque control.
One-handed start and reverse
control. Bottom collectable exhaust,
with silencer. Pressure sensitive
clutch.
Ideal with a 200l/min hose.
UNIVERSAL EXTRUSION
GUN
1861
Aluminium/steel body.
Variable speed trigger.
Stroke control.
Quick pressure regulator.
For all types of cartridges and
bags of 310/400 ml / 215x50.
Length: 320 mm / Height: 220 mm.
Air piston.
Weight: 1,125g
1/4” coupling.
Ideal with a hose for 100l/min
95
PNEUMATIC
www.sam.eu
1/2’’ IMPACT WRENCH
in
DOWN
Universal wrench for service and
maintenance workshops. Composite
e
motor housing. Steel impact
mechanism housing. Twin hammer
mechanism. Torque control.
fo in
fo
COMPLEMENTARY SAM
PNEUMATIC TOOLS OFFER
PRICE
1142Z
1142Z
FREE
800
7000
183
1,9
2,9
83
6,5
250
1/4”
SET OF 8 X 1/2’’ LONG IMPACT
SOCKETS FROM 13 TO 24 MM
1/2’’ ALUMINIUM IMPACT WRENCH
1144SZ
Very powerful universal wrench for
service and maintenance workshops.
s..
Structure aluminium body with
sheathed grip.
Steel impact mechanism housing.
Twin hammer mechanism.
3-position rotary reversing switch with
h
torque controlled tightening.
1/2”
2,9
1200
83
8000
6,5
185
250
DOWN
FREE
2,7
1/4”
PN-238
fo in
fo
in
Impact wrench with twin hammer
system. 3-position torque control for
controlled tightening.
PN-238
SET WITH 1/2’’ IMPACT
WRENCH AND SOCKETS
1/2”
999
9000
204
2,1
13,18
95
6,5
310
1/4”
PN-203-K
PN-251Z
fo
in
SAFETY AIR BLOW GUN
fo in
PN203-K
PRACTICAL
1/2”
540
9000
190
2,7
4,57
98
6,5
140
1/4”
L
CIA
SE
96
ON
TI
LEC
E
SP
fo in
1144SZ
PRICE
SET OF 3 X 1/2’’ SOCKETS
WITH PROTECTIVE PLASTIC
SLEEVES FOR 17/19/21 MM
WHEEL NUTS
1/2’’ COMPOSITE IMPACT WRENCH
Impact wrench with torque control.
Case contains: 10 6 point impact
sockets: 9, 10, 11, 13, 14, 17, 19, 22,
24 and 27. Extension bar, male key,
bits, oil can, oiler.
in
1/2”
fo
See our PTS range of air
tools in our catalogue or
on the website:
www.pts-outillage.com
Nickel-plated steel air blow gun.
Integrated safety system with air screen to
protect the user.
With 90 mm angled nozzle.
Air consumption: 300 l/min.
Recommended working pressure: 6.2 bar.
Air inlet thread: 1/4’’.
Weight: 0.150 kg.
INDISPENSAM
150 MM COMPOSITE ORBITAL
SANDER WITH SUCTION
MULTI TECHNICAL
GRINDER COLLET 6 MM
1441SZ
1610GZ
in
PRICE
in
DOWN
FREE
1/2”
800
7000
183
1,9
2,9
83
6,5
250
1/4”
3 ou 6
<2,5
20000
188
0,60
80
6,5
160
1/4”
PN-2103Z
1/2’’ zamac body, metal reservoir
Supplied with pressure gauge.
Oil mist lubrication, but it is also
possible to deliver non-lubricated air.
Flow rate: 1550 l/min.
Filtration: 25 microns.
Recommended working pressure:
0-18 bars.
Operating temperature: 0-60 °C.
Pressure gauge diameter: 50 mm.
Oil recommended: Engler viscosity
at 50°C: 1.95, aniline point: 100.
Weight: 2.5 kg.
Zamac body, metal reservoir.
Supplied with pressure gauge.
Oil mist lubrication.
The reservoir is filled automatically
by negative pressure, integrated level
indicator on the reservoir.
Flow rate: 1160 l/min.
Filtration: 25 microns.
Recommended working pressure:
0-18 bars.
Operating temperature: 0-60 °C.
Pressure gauge diameter: 50 mm.
Oil recommended: Engler viscosity
at 50°C: 1.95, aniline point: 100.
Weight: 2.1 kg.
Magnetic support for impact
wrench, sockets, wheel screws,
torque wrench…
430
PRESSURE GAUGE FILTERREGULATOR-LUBRICATOR
WITH SPACER
PN-2101Z
RC-200
FREE
FREEDISC HOLDER+
3 CUTTING DISCS
1/4” FILTER REGULATOR
3/8’’ PRESSURE GAUGE
FILTER-REGULATORLUBRICATOR
MAGNETIC TOOL HOLDER
fo
Comfortable covered housing.
Directable rear exhaust silencer.
Digital control system. Excellent grip.
Controller with two-finger control.
Sound level reduced to a minimum.
Power 430 watt. Speed: 20,000 rpm. - in
fo
Weight : 0,6 kg
1610GZ
Sound power level: 80 dB.
fo
Ultra light composite body with antivibration belt. Speed control. Rear
exhaust controller. Direct and rotary
connection of dust cuff Ø 28 mm.
Sander made of ultra light composite
material for optimum ergonomics.
Well balance and ergonomic allowing
for non-stop use.
Power 200 watt. Speed: 12,000 rpm.
fo in
Weight 0,8kg
Sound power level: 84 dB.
1441SZ
POLYURETHANE SPIRAL HOSE
19015-100Z
Spiral hose , length 0.35 to 6 metres
(extended).
Inside diameter: 8 mm.
Outside diameter: 12 mm.
Equipped with 2 protected 1/4» male
swivel fittings
PU
98 SHA
97
IMPACT SOCKETS
www.sam.eu
SET OF IMPACT SOCKETS
WITH RESISTORX PLUS®
HEADS
W
E
N
DOUCHORTORXZ
Contains 6 sockets in sizes T55, T60, T70,
T80, T90 and T100.
1/2’’ square drive.
Length: 40 mm.
For all uses requiring power and strength.
AVAILABLE:
MARCH
SET OF IMPACT
SOCKETS WITH TORX
PLUS® HEADS
DOUCHOTORXZ
Contains 6 sockets in sizes T55, T60, T70,
T80, T90 and T100.
1/2’’ square drive.
Length: 40 mm.
For all uses requiring power and strength.
AVAILABLE:
MARCH
TO USE WITH A RATCHET OR COMPACT
WRENCH WITH A LIMITED TORQUE
1/2” LONG
IMPACT SCREWDRIVER
SOCKETS HEX SET
CP-NSCJ
9 male hex bits
Length 80mm :
5-6-7-8-9-10-12-1417-19 to use with a
ratchet or compact
wrench with a
limited torque.
98
1/2” LONG IMPACT
SCREWDRIVER SOCKETS
TORX® SET
CP-NSTJ
PRICE
DOWN
9 impact male Torx®
bits
Length from 80 to
100mm : T20-25-3040-45-50-55-60-70
SET OF 19 1/2” IMPACT
SOCKET TOOLS
IN MM
72-NS19
PRICE
DOWN
Pack Dimensions:
515x170x95 mm.
Weight 2,7 kg
1 extension piece
125 mm
1 cardan joint
17 sockets : 9 - 10 11 - 12 - 13 - 14 - 16
- 17 - 18 - 19 21 - 22 - 23 - 24 - 27
- 30 - 32 mm.
SOCKETS 1/2” AND 3/8”
FOR ROUNDED NUTS
AND PINS SET
74NJ-J10
PRICE
DOWN
Sockets 1/2” et 3/8” : 6 - 8 - 10 - 11
- 12 - 13 - 14 - 15 - 17 - 19 - 21 - 24
- 27.
WORKSHOP EQUIPMENT
INDISPENSAM
ACCESSORIES FOR
HYDRAULIC PRESS
HYDRAULIC PRESS 15T
Welded frame.
Adjustable work table. Manual pump. Pressure
gauge with damper. Delivered with two
straightening V and base for floor fixing. Quick
and smooth approach.
PRICE
DOWN
HP-ADD
COMPLIANCE
WITH NF EN 1494
+ A1 STANDARD
AND 2006/42/CE
DIRECTIVE
Hydraulic press 30 and 50 T set.
Diam: 30,25,22,20,18,16,12
HP-ADE
Ref.
HP-15A
HP-30-A
HP-30-AN
HP-50-A
HP-50-AN
Capacity
15T
30T
30T with PEDAL
50T
50T with PEDAL
A mm
600
880
880
880
880
B mm
650
650
650
650
650
C mm
1765
1890
1890
1920
1920
D mm
120
145
145
145
145
E mm
500
710
710
710
710
G1 min
150
150
150
155
155
G2 maxi
660
700
700
720
720
R1 hydraulic
150
120
120
120
120
R2 extension
75
75
75
75
75
R
225
195
195
195
195
250
250
250
250
195
195
229
229
Lateral stroke
Weight (kg)
81
Hydraulic press 15T set :
Diam: 30, 25, 22, 20, 18, 16, 12 mm.
Price
IAL
C
PE
S
ION
CT
ELE
S
FOLDING CRANE - BENDING CRANE
Ref.
CG-5A
CG-10A
Designation
CG-20A
FOLDING CRANE
CG-5-PA
BENDING CRANE
Capacity
500 KG
1T
2T
500 KG
length mm
1280 mm
1500 mm
1870 mm
1540 mm
width en mm
900 mm
1020 mm
820 mm
885 mm
height of hook max
2400 mm
2750 mm
2470 mm
2070 mm
height of hook mini
520 mm
620 mm
620 mm
330 mm
Levage 1
500 kg
1000 kg
2000 kg
500 kg
Levage 2
400 kg
800 kg
1750 kg
400 kg
Levage 3
250 kg
500 kg
1650 kg
350 kg
Levage 4
150 kg
300 kg
250 kg
HYDRAULIC PRESS
GUARD KIT
HP-PROTECTZ
Fits presses HP-15A, HP-30-A and
HP-50-A. Sliding polycarbonate front
guard, several positions.
REMOVAL
PLATE FOR 30T PRESS
HP-SUP
Designed to be used on HP presses
PRICE
AVAILABLE:
DOWN
MARCH
Price
COMPLIANCE
WITHNF EN
1494+ A1
STANDARD
AND 2006/42/
CEDIRECTIVE
SECURITY
Automatic shutdown of the
crane’s descent when the user
loses control.
CONVENIENT
Designed to offer an adjustable
and stable bearing base for vehicle
hubs and other complex parts
in order to remove the bearings.
Supplied with 4 steel columns,
length can be adjusted with
removable corner spacers.
99
WORKSHOP EQUIPMENT
www.sam.eu
FLOOR JACK
CRIC HYDROPNEUMATIQUE
SECURITY
COMFORT
Dead man system with
safety valve
Intervention control in
case of air supply failure.
The handle can locked in
4 different positions (45,
vertical, horizontal or
folded).
Sécurité en cas de coupure d’arrivée d’air. Hauteur de tête réduite pour
faciliter le passage sous les carrosseries. Poignée de contrôle ergonomique.
Poignée de maintien et d’approche pouvant se bloquer dans 4 positions (45°,
verticale, horizontale, ou repliée).
Système homme mort avec soupape de sécurité et soupape anti-dépassement.
COMPLIANCE WITH
NF EN 1494 + A1
STANDARD AND
2006/42/CE DIRECTIVE.
COMPLIANCE WITH
NF EN 1494 + A1
STANDARD AND
2006/42/CE DIRECTIVE.
Ref.
CR-15-B
Capacity
1,5T
CR-20-B
2T
CR-20-BP
CR-30-B
2T
ROLLING
JACK
3T
48
140
A
110
75
B
665
390
455
C
165
135
135
CR-60-B
CR-100-B
6T
10T
CR-120-B
12T
CR-200-B
20T
170
170
190
200
385
410
435
390
415
185
220
270
270
310
D
775
465
520
525
580
605
580
615
E
1250
880
920
1150
1310
1600
1550
1777
F
2180
1810
1850
2080
2215
2530
2480
2707
G
360
360
360
360
414
414
414
415
H
360
260
260
260
336
386
386
302
weight (kg)
60,5
32
43
46
81
123
120,5
234,5
Ref.
CRH-30
CRH-65
Capacity
15-30T
20-35-65T
A
518
1055
B
300
235
C
400
515
D
154
210
E
253
327
Weight (kg)
31
74,5
Price
BOTTLE JACK
Safety valve and hydaulic stroke
restricter
Price
PIT JACK
Dead man safety.
Ascent and descent pedal to work frree hands.
Hydraulic limiter.
Ref.
300 KG
COMPLIANCE WITH
NF EN 1494 + A1
STANDARD AND
2006/42/CE DIRECTIVE.
HF-2A
Height mini : 1 120mm
Height maxi : 1 920mm
Stroke : 800mm.
Ref.
1200 KG
HF-7A
100
HCB-3
HCB-3B
HCB-5
Capacity
2T
3T
3T
5T
A mm
160
168
210
212
B mm
100
105
150
150
C mm
50
65
65
75
D mm
310
338
425
437
Weight (kg)
3,6
3,9
4,2
5
Price
750 KG
Capacity: 750 kg.
Minimum height of
1138 mm
and maximum of
1958 mm.
Stroke 820 mm.
HCB-2
HF-12A
PRICE
DOWN
Capacity : 1 200kg
Height mini : 900cm,
Height maxi :
1 900cm.
PRICE
DOWN
HCB-8
HCB-10
HCB-12
HCB-20
HCB-30
Capacity
8T
10T
12T
20T
30T
A mm
219
219
226
234
242
150
B mm
150
150
150
150
C mm
75
75
75
75
75
D mm
444
444
451
459
467
Weight (kg)
5,9
6,5
8
12,1
15,5
Price
INDISPENSAM
PRICE
ADJUSTABLE OIL - FILTER
WRENCHES LV AND HGV
628-J2
HGV SELF -GRIP - PING
G DOWN
OIL -FILTER WRENCH
628-6
PRICE
LV SELF - GRIP - PING DOWN
OIL - FILTER WRENCH
628-3
931
Steel frame with durable PVC
coating. 6 rotating wheels.
Adjustable head cushion
Dimensions = 945 x 430 x 85 mm.
Resistant to 120 kg
Delivered with a free HGV
strap. Capacity from 65 to
155mm.
Self-tightening. Square drive 1/2”
Opening from
90 to 170mm.
Self-tightening.
Square drive 3/8”
Opening from 62
to 96mm
AIR HOSE REEL 10 MM
SAFETY TAPE WINDER, 8 M
CABLE REEL 50 METRES
ENR-A10Z
Housing made of breakable plastic.
Swivel wall mount. Supplied with
hose stop device every 50 cm
Unwound hose length: 15 m + 1 m
Hose type: Polyurethane. Hose inside
diam.: 10 mm
Max. pressure: 15 bar. Outlet fitting:
3/8’’ M.
2863Z
Winder to mark out provisional areas
or to secure a hazardous area: e.g.
garage pit.
Built-in metal fastening hook.
Red and White tape to mark out
obstacles or hazards.
INSPECTION CREEPER
UK-50-FZ
Thermal cut-out.
Cable section: 3 x 1.5 mm2.
SET OF 5 T-HANDLE
SOCKET WRENCHES
63-BT-J5
Dimensions: 8-10-12-13-14 mm.
ACCESSIBILITY
Extra long for access
wells.
STEEL OIL CAN
675-30Z
Steel sheet. Comes with 1 rigid spout
and 1 flexible spout
Operates by pressing handle.
Capacity: 30 cm3
START YOUR VEHICLES SAFELY
POWER: Clips, cables, fuse all 100% copper for perfect conducting of the
charging energy.
ELECTRONIC SECURITY: 1st protection: Reverse polarity protection with
buzzer avoids damaging the vehicle computer. Second protection: Signal
operates even when the SAM BOOSTER is off.
ROBUST: Reinforced ABS housing to withstand day-to-day knocks in
the workshop. Fuse encased in ceramic and placed in an accessible
compartment to avoid having to open the booster (comes with 2 fuses
including one spare). Protection system on the on/off button.
EXTRA FUNCTION: Saves the vehicle’s electronic data when the battery is
removed. Can be used to power any option 12V device.
GREASE GUN
680Z
12V/1450A
BST-12B
12V/1150A
BST-12A
Hose with coupler.
Fitting with coupler.
Hydraulic coupler.
LEAD FOR CIGAR
LIGHTER SOCKET
SUPPLIED
12V/2300A - 24V/1450A
BST-12-24A
L
CIA
E
SP
ION
S
CT
ELE
101
www.sam.eu
Art is beautiful when the hand, the head and the heart work together!
th the tool.
wi
ip
sh
ion
lat
re
ur
yo
ise
ion
lut
vo
re
to
ing
go
e
At SAM, we ar
Sébastien Haller
plastic artist/sculptor
102
INDISPENSAM
CONNECTED TOOLS
Our connected tools are the
fruit of the SAMTECH
development programme.
The new SAM products
herald the programme
known
as
SAM
IWS
(Intelligent Work Station).
IZ
540-
2 products are available in
2015, the case of connected
tools and the IS intelligent
roller cabinet.
The
use
of
different
technologies
(Connected
APS, CORTEX-M3 32 bits…)
means we can offer you
solutions for a fixed or mobile work area.
Voir page 10.
Advantages of the SAM IWS technology
You are faced with ever more demanding
requirements: safety, cost reductions,
traceability, optimisation of the workstation.
The SAM IWS has taken on board all these
factors, by the following process:
Intervention - Tools - Demands (standards,
It also enables you:
- To meet the demands for efficiency
made on you and to cope with the need
to perform ever more complex tasks...
because it optimises the workstation and
integrates your tutorials
- To provide concrete answers to your
customers’ demands on the use of the
products… because it includes complete
traceability (use log, etc.)
- To innovate… because it gives you a
real competitive advantage over your
competitors
- To make economies of scale on the use of
the tools… because it allows pooling and
the rationalisation of your range of tools
Our specialists will offer you an expert
inventory of your needs and cost the SAM
IWS solution that will meet them, as well
as the savings it will generate through
the locating of tools and improvement of
the tool purchase budget by pooling and
sharing tools …
specifications) Traceability
A W OR LD FI RS T:
RP RO OF TO OL S
PE
M
TA
20
OF
SE
CA
t
1s
E
TH
TS
EN
ES
SA M PR
ENTER THE WORLD OF THE FUTURE
SAM enables you to keep control of
your tools, whilst offering safety and
security in the use of your SAM hand
and power tools through:
Access to a technology that enables
you to meet specifications and current
standards.
A solution for locating your tools.
A new type of economic approach that
makes pooling and sharing tools possible.
20-PIECE INTELLIGENT TOOLCASE
TVR-20ISZ
Polypropylene case with trolley
Reinforced shell (withstands pressure of 90 kg) - L 465 x W 352 x H 255 mm
Contains: screwdrivers, pliers, hammers…
For information about SAM connected tools, contact us on +33(0) 4 77 921 335
103
INDISPENSAM
Connection made,
VP15ANG
M5 nut tightened by Eric
on 8/10/2015 at 15.24 using a SAM No.
D415 Hybrid wrench.
Maintenance programme transmitted.
SAM INTERNATIONAL
60 Boulevard Thiers - CS 10528
42007 Saint-Etienne Cedex 1 - FRANCE
Customer department: T. +33 (0)4 77 92 13 23
E-mail : [email protected]
RCS SAINT-ETIENNE N°338 002 231
N°TVA FR 36 338 002 231
[email protected]
SINCE 1921
DEPUIS
DEPU
IS
S 192
1
1921
1
C R E A T O R
O F
Q U A L I T Y
T O O L S
www.sam.eu
Offer valid until 31/12/2015 in territories part of the European Union, within the limit of stocks available. Rollersam®, Samsodrive®, Samsocut®3AMSOmEX®, Samsoforce®, Servisam®, Dynaprod®$YNAmASH®, Dynasam®, Dynatech® are registered trademarks belonging to SAM.
Phillips®, Pozidriv®, Torx®, Resistorx®, Araldite®, Clic® are registered trademarks belonging to companies other than SAM. Non contractual photos and texts.