SAM TOOLS - Promo action 2012

Transcription

Training of young people, sustainability development,
corporate responsibility, safeguarding employment
and industrial tool, security tools and men.
Here are the core values that drive the company SAM Tools
for 90 years and that we find in our partners.
SAM partner of GMT 94
team
For over 15 years, the SAM group support the team
GMT 94, world champion endurance and several times
winner of “Les 24 heures du mans” and of “the Bol
d'Or”
Beyond its performance and its ability to be part of the
best teams in endurance races, the SAM group supports
the GMT 94 Team for the values fiercely defended by
its leader, Christophe Guyot. Independent, trainer of
many young people in difficulty, instigator of numerous
operations for improving road safety, Christophe Guyot
promotes the performance and find in competition an
expression mode, shared by the SAM group.
SAM - 90 YEARS OLD
Even after 90 years it’s just the beginning !
The history of SAM continues with a mix of tradition
and innovation.
We wish to thank:
Our customers, whose satisfaction is our constant concern,
Our staff for their commitment and shared values,
Our founders, successive CEO and shareholders for their vision, tenacity
and loyalty, our environment in general, suppliers and all our partners for
their daily support.
All of you have contributed to the SAM of today and we are grateful.
With this cohesion and our values we will forge together the SAM of
tomorrow and give you appointments for new celebrations !
By becoming a partner of CASE RUGBY, SAM Group identifies in human values conveyed
by this sport: respect, discipline, solidarity, responsibility, safety, friendliness and cooperation.
2
SAM A FRENCH HAND
TOOLS MANUFACTURER
A direction on technical products
"SAM is in constant adaptation with the realities of the global market.
As a family and industrial company based in France, we want to highlight our local
expertise, our proximity and our ability to offer technological products in response
to low cost products that have flooded the basic tools markets. "
Evidenced by an investment of seven million euros for five years in its industrial facilities,
logistics, R & D and marketing, SAM has the willing to support its growth on its location in Saint
Etienne. Towards its customers, the company also deploys a new strong message: "Buy better! ".
SAM is a generalist company. We bring added value with specific products but also an
alternative with economic products and an efficient logistics.
SAM is the best value for money and offers a quality service and closeness.
A new business approach
Sam supports you
The offer is segmented
according to a new marketing
concept: the concept of trades.
One way to highlight SAM expertise
to meet the needs of its end user
customers and its ability to give a
specific and relevant answer to their
needs.
"As a generalist hand tools manufacturer of hand tools, where we can
add value, it's not basic products
but on the recommendation of
specific tools for a trade".
The manufacturer also considers
its duty to develop an educational
approach with users, including
professional school students, future
users of the tools of the brand.
3
SAINT-ETIENNE
A RELIABLE COMPAGNY IN SERVICE
OF PROFESSIONS AND OF THEIR
EVOLUTIONS
A PROJECT FOR THE FUTURE TO SHARE
COMMON VALUES
> PREMIUN QUALITY TOOLS AT THE BEST PRICE
> MANUFACTURING PROCESSES AT THE CUTTING EDGE
OF TECHNOLOGY
> EFFICIENT LOGISTICS AT YOUR SERVICE
> PROFESSIONALS AT YOUR LISTENING
> NEED A SPECIAL TOOL ?
SAM MANUFACTURE IT
> WWW.SAM.EU
THE WEBSITE AT TRADES SERCICE
> THE SAM WARRANTY*
100 % OF SAM TOOLS ARE GUARANTEED AGAINST ANY MANUFACTURING DEFECT.
* FULL DETAILS OF OUR GUARANTEE IN OUR TARIFF.
CONTENTS
SEDUCTION CASES SPACE .................. P. 5-8
MODULE S SPACE ................................. P. 9-11
ROLLER CABINET SPACE ..................... P. 12-15
SET SPACE ............................................. P. 16-20
STORAGE SPACE ................................... P. 21-23
SOCKETS AND ACCESSORIES SPACE . P. 24-25
KEYS AND WRENCHES SPACE ............ P.26-27
SCREWDRIVERS SPACE ....................... P. 28-29
HAMMERS SPACE ................................. P. 30-31
BUILDING SPACE .................................. P. 32-34
BOLT CUTTERS ..................................... P.35
MEASURING SPACE ............................. P. 36
VIDEOSCOPE SPACE ............................ P. 37
TORQUE CONTROL SPACE ................... P. 38-41
CYLINDER HEAD SPACE ...................... P 42-43
4
1 000V / HYBRID SPACE .................... P 44-45
LIGHTING SPACE .................................. P. 46-47
HYDRAULIC SPACE .............................. P. 48-50
BEARING SPACE ................................... P. 51
AIR TOOLS SPACE ................................ P. 52
CORDLE SS SPACE ................................ P. 53
CHARGER SPACE .................................. P. 54
BOOSTER SPACE .................................. P. 55
TIMING TOOLS SPACE .......................... P. 56
DRAIN SPACE ........................................ P. 57
BRAKES SPACE ..................................... P. 58
SUSPENSION SPACE P ......................... . 59
WHEELS SPACE ..................................... P.60
MULTI-SERVICE SPACE ........................ P. 61
TEXTILE SPACE ..................................... P. 62-63
145
TOOLS READY TO HAND WHEREVER
YOU TRAVEL
145 TOOLS “ SEDUCTION “ CASE
CP-146Z
- 12 combination wrenches: 8 - 9 - 10 - 11 - 12 - 13 - 14 -15 - 16 17 - 18 - 19 mm
- 13 screwdrivers : Slotted blade, Phillips®,Pozidriv®, Torx®
- 4 micro-mechanical screwdrivers
- 30 bits : Slotted blade, Phillips®, Pozidriv®, hexagonal, Torx®, Résistorx®
- 4 pliers
- 1 metal saw
- 9 hexagonal head keys
- 1 level gauge
- 1 rule
- 1 penlight
- 1 cutter
- 1 testing screwdriver
- 19 metal drilling bits
- 1 adjustable wrench
- 1 nippers
- 17 sockets and accessories 1/2 : 10 to 24 mm
- 23 sockets and accessories 1/4 : 3.2 to 14 mm
- 1 hammer and 4 punching tools
- 1 short tape measure
PLIERS WITH
SPRING
5
PROFESSIONAL ADVICE + 33 4 77 92 25 11
WEBSITE : www.sam.eu
SEDUCTION
CASES SPACE
33 TOOLS SET
CP-33BAZ
Combination wrenches: 7-8-9-10-11-1213-16-17-18-19
1 multigrip pliers,
clamp a straight beak,
1 flat nose pliers,
1 diagonal cutters,
1 tri-material hammer,
5 slotted screwdrivers,
4 Phillips screwdrivers,
1 set of hexagonal keys swith spherical
head,
1 set of Tork keys,
1 cutter,
1 general-purpose shears,
1 rule,
1 textile storage box.
TEXTILE TROLLEY CASE
WITH 145 TOOLS
CP-145BAZ
Combination wrenches from 8 to 19,
1 saw,
2 drive sliding tee 1 / 2''and 1'',
2 extensions,
1 extensinon,
2 universal joints,
1 ratchet 1 / 4''and 1 / 2'',
1 / 4' sockets from 3.2 to 14 and 1 / 2
sockets from 10 to 21mm,
1 adjustable wrench,
1 scribe,
1 level,
1 set of hexagonal keys,
1 set of 4 pliers,
5 Torx screwdrivers,
3 Phillips screwdriver,
1 screwdriver tester,
4 precision screwdrivers,
2 chisels,
2 drift punches,
1 measurement 2 meters,
1 rule,
1 light pen,
1 cutter,
1 hammer,
1 bit holder,
3 sets of bits,
19 metal drills,
1 mechanic end nippers
BACKPACK WITH 51 TOOLS
CP-51BAZ
1 hexagonal keys set,
1 set of 4 pliers,
1 shear,
1 measure 5 meters,
1 cutter,
1 rule,
6
1 adjustable wrenches,
1 SAMSPLUS hammer,
1 sledge hammer,
1 crimping pliers,
1 shear,
1 saw with a set of blade,
1 center punch,
2 drift punches,
1 backpack BAG-5
MARTIN,
MAINTEN
ANCE TEC
HNICIAN
"Having th
e
to
is a daily co ols easily accessible
mfort. "
BI-MATERIAL TOOLBOX
WITH 50 TOOLS
CP-50BOZ
1 set of 4 pliers,
1 SAMSOPLUS hammer,
1 rack with hexagonal keys
and Torx keys,
1 measure 3 meters,
sockets 1 / 2'' from 10 to 24mm ,
1 extension 125mm,
1 drive sliding tee,
1 universal joint 1 / 2'',
1 ratchet 1 / 2,
1 cutter,
1 metallic brush,
1 bi-material toolbox.
SUITCASE WITH POLYPROPYLENE
SHELL AND 99 TOOLS
CP-99TVZ
Open end wrenches from 3,2x5 to 12x13,
hexagonal keys from 0.9 to 8 and from 1 / 8''to 5 /'',
7 electrician pliers set,
1 crimping pliers,
1 inspection mirror,
1 scribe,
1 light pen
MULTIMETER
7
SEDUCTION
CASES SPACE
PARKA
91 TOOLS-SET
CP-91Z
- 1 toolbox with 5 trays
- 18 combination wrenches,
6 to 24 mm
- 10 hexagonal keys 2 to 10 mm
- 1 riveting hammer de 400 g
- 1 adjustable wrench de 12“
- 1 multiple grip plier
- 1 lock grip pliers
- 1 bimaterial combination pliers
- 1 bimaterial diagonal cutting pliers
- 1 bimaterial flat nose plier
- 1 bimaterial telephone plier
- 1 inner pliers circlip
- 1 outer pliers circlip
- 5 slotted head screwdrivers 3.5x754x150-5.5x150-6.5x150-6.5x200
- 1 coated slotted head
screwdriver 3.5x75
- 2 nails 4.5-6.5 mm
- 2 drift punches 4.9-6.9 mm
- 1 constant profile chisel
- 1 bimaterial hacksaw frame
- 10 saw blades
- 22 1/2“ sockets, 8 to 32 mm
- 1 1/2“ slide handle
- 2 1/2“ extensions
- 1 1/2“ universal joint
- 1 1/2“ bimaterial ratchet
- 5 ratchet ring wrenches set
- 1 565 g adjuster hammer
82 TOOLS
SEDUCTION
CASE
CP-81Z
- 9 combination wrenches: 8-9-10-11-13-14-1617-19 mm
- 17 pass througth sockets and accessories
- 14 pass through sockets and accessories 1/2"
- 1 multigrip pliers
- 1 bimaterial adjustable wrench 8''
- 9 hexagonal keys set
- 1 x 3m short tape measure
- 30 bits: Phillips®, Hex, Pozidriv®, Torx®, Slotted
head and Resistorx®
69 TOOLS SEDUCTION CASE
78 TOOLS SEDUCTION CASE
CP-78Z
- 9 combination wrenches: 7-8-10-11-12-13-1417-19 mm
- 9 sockets 1/4: 5-6-7-8-9-10-11-12-13 mm
- 1 bimaterial handle-fitted extension 1/4
- 1 extension 1/4 of 100 mm
- 1 bit-holder socket
- 12 sockets 1/2 SH: 10-11-13-14-15-16-17-18-1921- 22-24 mm
- 1 extension 1/2 of 125 mm
8
- 1 bimaterial ratchet 1/2 and 1 bimaterial ratchet 1/4
- 1 bimaterial multigrip plier
- 1 bimaterial adjustable wrench
- 1 metal short tape measure : 3m
- 9 hexagon keys set: 1,5-2-2,5-3-4-5-6- 8-10 mm
- 1 rack of 10 Phillips® and hexagon bits
- 1 rack of 10 Pozidriv® and Torx® bits
- 1 rack of 10 Slotted head and Resistorx® bits
- 1 aluminium case
CP-74Z
- 9 combination wrenches: 10 - 11 - 12 - 13 - 14 - 16 - 17 19 - 22 mm
- 11 sockets (1/4): 3,2 - 4 - 5 - 5,5 - 6 - 7 - 8 - 9 - 10 - 11 - 13 mm
- 1 extension with dual material handle (1/4)
- 150 mm 1/4 extension
- 1 bimaterial ratchet (1/4)
- 1 bit holder socket
- 10 1/2 sockets: 14 - 15 - 16 - 17 - 18 - 19 - 21 - 22 - 23 - 24 mm
- 1 extension 1/2: S-219 mm
- 1 bimaterial ratchet (1/2) ”PUSH”
- 1 bimaterial multigrip pliers
- 1 bimaterial universal pliers
- 1 hammer
- 30 bits: Slotted blade, Phillips®, Pozidriv®, 6 pans, Torx®, Résistorx®
MODULES SPACE
7 S1 SLOT AND PHILLIPS®
SCREWDRIVERS MODULE
7 S1 SLOT AND POZIDRIV® 7 S1 SCREWDRIVERS
SCREWDRIVERS MODULE
TORX® MODULE
T-PJ7MMZ
T-PZJ7MMZ
T-XJ7MMZ
3x100 4x150 5,5x150
6,5x150 8x150
1x100 2x125
3x100 4x150 5,5x150
6,5x150 8x150
1x100 2x125
Jeux de tournevis S1 en module mousse
10x80 15x80 20x100 25x100 27x115 30x115 40x130
12 COMBINATION
WRENCHES MODULE
34 SOCKETS AND
ACCESSORIES
MODULE 1/4
27 SOCKETS AND
ACCESSORIES
MODULE 1/2
73-R34MMZ
75-SH27MMZ
1 ratchet 1/4, 6-point sockets 1 / 4 from 5.5 to 14,
3 extensions, 1 sliding handle, 1 universal joint
1 hafted handle, 1 socket screwdriver
9 hexagonal keys,
7 screwdriver Phillips,
Pozi, slotted bits
1/2 ratchet , 2 extensions 125 and 250mm,
1/2 universal joint
6 point sockets: 8-9-10-11-12-13-14-15-16 17-18-19-21-22-23-24-25-27-29-30-32
50-J12MMZ
7-8-9-10-11-12-13-14-16-17-18-19 mm
10 ANGLED OPEN-SOCKET
WRENCHES MODULE
4 PLIERS MODULE
94-SJ10MMZ
Lock grip pliers
Multigrip pliers
Combination pliers
Cutting pliers
8 9 10 11 12 13 14 17 19 21 mm
P21-J4MZ
PROFESSIONAL ADVICE
+ 33 4 77 92 25 11
9
MODULES SPACE
7-S1 SCREW
DRIVERS MODULE
7-S1 TORX®
SCREWDRIVERS
MODULE
12 COMBINATION
WRENCHES MODULE
T-1MZ
T-3MZ
7-8-9-10-11-12-13-14-16-17-18-19
5 slotted : 3-4-5.5-6.5-8,
2 phillips® : n°1, n°2
T10-T-15-T20-T25-T27-T30-T40
12 RATCHET
COMBINATION
WRENCHES MODULE
10 ANGLED OPEN-SOCKET
WRENCHES MODULE
50C-J12MZ
8-10-11-12-13-14-16-17-18-19
94-SJ10MZ
7-8-9-10-11-12-13-14-16-17-18-19
50-J12MZ
6 BIG DIMENSION
ANGLED OPEN-SOCKET
WRENCHES MODULE
94-SJ6MZ
21-22-23-24-27-30
1/4 SOCKETS AND
ACCESSORIES MODULE
3/8 SOCKETS AND
ACCESSORIES MODULE
1/2 SOCKETS AND
ACCESSORIES MODULE
73-R1MZ
74-J-20MZ
75-SH1MZ
1/4 push ratchet,
Drive spinner,
1 / 4 universal joint,
1 /4 drive sliding tee,
1 short and long extension
1/4 sockets: 5,5-6-7-8-9-10-11-12-13-14
Slotted screwdriver bits 4.5 - 6.5 - 8mm
Phillips® screwdriver bits No. 1-2
Pozidriv® screwdriver bits No. 1-2
9 hexagonal keys set from 1.5 to 10mm
1/4 bit sockets RD-1
3/8 ratchet , extension 130 mm right angle and inclined,
250mm extension, 3/8 universal joint,
6 point sockets : 8-9, 12 point sockets: 10-11-12-13-14 15-16-17-18-19-20-21-22.
1/2 ratchet , 2 extensions 125 and 250mm,
1/2 universal joint
6 point sockets: 8-9-10-11-12-13-14-15-16 17-18-19-21-22-23-24-25-27-29-30-32
10
7 INSULATED
SCREWDRIVERS
1000V MODULE
1/2 AND 1/4 PASS
TROUGH SOCKETS
+ ACCESSORIES MODULE
ZTB-PJ7MZ
M-61Z
3x100 3,5x100 4x100 5,5x125 6,5x150
1x125 2x150
1/2 bimaterial pass through ratchet - Extension 1 / 2 75 mm.
Ratchet adapter 1 / 2 and 3 / 8.
6 point sockets 1 / 2 : 10-11-12-13-14-15 -16-17-18-19
1/4 pass through ratchet with 1/4 extension
Adapter for ratchet 1 / 4
6 point 1/4 socket : 4-5-5.5-6-7-8-9-10-11-12-13mm
1/4 screwdriver bit adapter
1/4 bits set slotted - Torx® - Phillips®
drive spinner
1/4 screwdriver sockets
4 CIRCLIP PLIERS
MODULE
10 IMPACT TOOLS
MODULE
17 TOOLS MODULE
190-J4MZ
M1-10MZ
Circlip pliers for inside circlip 19-60
Circlip pliers for inside circlip 90° tip 19-60
Circlip pliers for outside circlip 19-60
Circlip pliers for outside
circlip 90° tip 19-60
Extra flat chisel, punch, precision cape chisel, trimaterial hammer
2 tips hammer, 5 drift punches
Short tape measure
9 hexagonal keys with spherical head
Adjustable wrench
Vernier caliper to 1/20 mm
Cutter with retractable blade
Padlock
Feeler gauge
Carbide scriber
Rule
5 FILES MODULE
IMPACT SCEWDRIVERS
MODULE
IMPACT SOCKETS
MODULE
270A-J20MZ
NSJ-15MZ
2-3 Straight bits
2-3 Pozidriv bits.
2-3 Phillips bits.
5-6-8-10 Hexagon bits
20-25-27-30-40-45-50-55 Torx bits.
Extension 125mm
+ sockets 10-11-12-13-14-15-16-17-18-19-21-22-23-24
LPJ-1MZ
Flat.
Half-round.
Square.
Three-square.
Round.
4 PLIERS MODULE
P13-J4MZ
Lock grip pliers
Multigrip pliers
Combination pliers
Cutting pliers
U1-7MZ
11
EDDIE,
GER
OP MANA
y I can
WORKSH
technolog
ROLLER CABINET
SPACE
When a drawer is opened, the others remain locked.
Automatic locking system for each closing of the drawers
Recessed aluminum tray. 2 side handles nylon to facilitate
travel. Central locking with folding key (supplied with
2 keys). 2 wheel fi xed, 2 castors with a locking system.
SERVI-40
“With the
orkshop”
fe in my w
work in sa
Ø 125 mm. Allows the use ABS and foam storage
modules. Resistant up to 950 kg in a static position.
Load capacity per drawer: 30 kg.
Overall dimensions: H 940 x W 710 mm x D 485 mm.
Effective drawer dimensions: L 535 mm x D 410 mm.
EFFECTIVE
Tray in ABS reinforced with an aluminum
plate oil resistant.
Liquid drainage system with four notches
CONVENIENT AND COMPACT
Nylon handle charged fiberglass.
Rounded shape perfectly integrated into
the roller cabinet
SECURITY
Automatic locking system for each closing of drawers
To avoid any risk of tilt, the roller cabinet SERVI- 40 are equipped
with a unitary system of opening drawers.
Central and simultaneous closing of all drawers with key locking
HANDY and SECURE
Wheels with ball bearings.
2 castors with brake locking system.
2 fixed wheels
Large diameter: 125 mm.
FUNCTIONAL
The storage trays MODULOSAM (ABS and foam)
fit in the drawers for optimum storage and
quickly view the tools missing
5 DRAWERS
SERVI-540
Drawers:
- 1= 60 mm
- 2=100 mm,
- 1=150 mm,
- 1=220 mm.
6 DRAWERS
SERVI-640
Drawers:
- 2= 60 mm
- 3=100 mm
- 1=220 mm
7 DRAWERS
SERVI-740
Drawers:
- 2= 60 mm
- 3=100 mm
- 1=220 mm
12
FOR MORE INFORMATION
WWW.SAM.EU
BOX AND
ADAPTER
FOR SERVI-40
SERVI-KR40Z
Allows the assembly of two chests (SERVI-R40)
or a of a chest (SERVE-R40) with a roller
cabinet of 40 series (5, 6 or 7 drawers).
The kit is delivered with fastenings
Product sold without SERVI-740.
WORKSHOP
ROLLING
CABINET
SERVI-R40Z
Allows the transformation of the
chest (SERVI- R40) in mobile chest.
The kit consists of a handle and
4 wheels Ø 125 mm.
2 fixed, 2 castors, one with brake
6 DRAWERS LARGE ROLLER
CABINET STOP MODEL +
7 DRAWERS LARGE ROLLER CABINET
STOP MODEL + STORAGE CABINET
SERVI-640L
SERVI-740L
Drawers:
- 2 = 60 mm,
- 3 =100 mm,
- 1 =210 mm.
Drawers:
- 3 = 60 mm,
- 3 =100 mm,
- 1 =150 mm.
13
Sold as a kit ready to assemble.
The plate is predrilled for easy
mounting.
ROLLER CABINET
SPACE
Beech wood laminate tray with a
thickness of 40 mm and a depth
of 700 mm.
Seamless multi-layer wooden
plate, dimensionally stable,
water-resistant varnish.
Robust steel section U feet
(80 x 50 x 20 mm).
12DRAWERS
WORKBENCH WITH
SHUTTER CABINET
2012-PMA
Worktop: 2000 mm. 2 blocks of 6 drawers (Use B6).
Sold as a kit ready to assemble. The worktop is predrilled for
easy mounting. Wortop is beech wood laminate made with a
thickness of 40 mm and a depth of 700 mm. Seamless
multi-layer worktop, not deformable, varnishes water resistant.
Height: 870 mm.
6 DRAWERS WORKBENCH
2006-PM
Two lengths of tray: 2000 mm
6 drawers block (SERVI-B6).
The feet can be attached to the ground for stability of the
workbench.
Height: 870 mm.
WORKBENCH
2000-PM
Two lengths of tray: 2000 mm (2000-PM)
Height: 870 mm.
14
COMPACT WALL
STORAGE CABINET*
SHUTTER CABINET
1.50 M LONG*
SHUTTER CABINET
2 M LONG*
2664
2615
2620
width 60.5 cm
depth 23 cm
height 90 cm
Panel perforation 10 x 10 mm
lockable
delivered without tools.
width 1.5 m
depth 17 cm
height 90 cm
lockable
width 2 m
depth 17 cm
height 90 cm
lockable
* Hooks are available on request.
TRAY
Made in ultra resistant
ABS
ROBUST
Roller cabinet with double
reinforced frame.
Steel rivet and welded
assembly
INCREASED
SECURITY
• Drawers with automatic
locking system
5 DRAWERS ROLLER
CABINET WITH
ALUMINIUM TRAY
6 DRAWERS ROLLER
CABINET WITH
ALUMINIUM TRAY
SERVI-530
SERVI-630
Height: 940 mm. Width: 680 mm.
Depth: 475 mm. Weight: 52 kg.
5 drawers: 1 x 50 mm, 2 x 100 mm,
1 x 150 mm and 1 x 200 mm
Height: 940 mm. Width 680 mm.
Depth 475 mm. Weight 55 kg.
6 drawers: 2 x 50 mm, 3 x 100 mm,
1 x 200 mm.
15
135
TOOLS EASILY REACHABLE
FOR EVERYDAY
5 DRAWERS ROLLER CABINET
WITH ALUMINIUM TRAY
+ 135 TOOLS IN MODULES
CPP-135SV
- 3 electrician’s Slotted screwdrivers S1: 3x100 – 4x100 – 5,5x150
- 2 mechanic’s Slotted screwdrivers S1:6,5 x 150 – 8 x 150
- 2 Phillips® screwdrivers S1: N°1 – N°2
- 7 Torx® screwdrivers : 10x80 -15x80 - 20x100 - 25x100 - 27x115 30x115 - 40x130
- 10 hollow offset tubular socket
wrenches: 8 to 19 mm
- 12 combination wrenches :7 to 19 mm
6 combination wrenches : 22 to 32 mm
- 1 lock grip pliers L = 220 mm
- 1 bimaterial multigrip pliers. L = 250 mm
- 1 universal pliers L = 165 mm
- 1 diagonal cutter pliers 180 mm
- 1 chisel, 1 punch : ø 3 mm
- 1 precision cape chisels
- 1 x 2-bit soft-face hammer,
- 1 riveting hammer Samsoplus® : 32 mm
- 5 drift punches : ø 2,4 - 3,4 - 4,9 - 6,9 - 8,9 mm
- 2 x ratchets : ½ - ¼
- 2 extensions : ½ - ¼
- 3 ratchet adapters ¼ - 11 pass through sockets for small-size ratchet : 4 to 13 mm
- 10 pass through sockets for large-size ratchet : 10 to 19 mm
- 1 adapter ¼
- 1 extension ¼ with end-piece holder
socket
- Bits : slotted blade, Phillips®, Torx®, 6 point, Pozidriv®, Résistorx®
- 1x3m short tape measure, 9 long hexagonal keys with spherical head :
1,5 mm to 10 mm, 1 adjustable wrench,
1 vernier gauge 1/20ème, 1 retractable
knif, 1 padlock, 1 feeler gauge, 1 scriber, 1 flexible rule
TRAY
Made in ultra resistant ABS
INCREASED SECURITY
• Drawers with automatic
locking system
ROBUST
Roller cabinet with double reinforced frame.
Steel rivet and welded assembly
16
135 TOOLS IN 3 FOAMS
CPP-135M
CPP-135M1
CPP-135M2
CPP-135M3
WITH ALUMINIUM TRAY
+ 135 TOOLS IN MODULES
CPP-135MZ
POLO SHIRT + SHIRT OFFERED
SERVI-530 5 drawers roller cabinet
DRAWER 1:
- 7 slot screwdriver
- 7 torx ® screwdriver
- 1 flat chisel, a punch, a cape chisel,
a trimaterial hammer,
1 mallet, 5 drift punches
CPP-135M1
SWEATSHIRT
+ POLOSHIRT
DRAWER 2:
- 10 socket wrenches: 8-10-11-12-13-14-16-17 - 18-19
- Lock grip pliers, multigrip pliers, combination pliers, cutting pliers
- 1/2 pass through ratchet, 1/2 75mm extension
1 / 2 and 3 / 8 adapter
- 1/2 pass trough sockets: 10-11-12-13-14 - 15-16-17-18-19
- 1/4 pass through ratchet, 1/4 75mm extension 1/4 adapter
- 1/4 pass through sockets 1/4 sleeper: 4-5-5,5-6-7-8-9 - 10-11-12-13
- 1/4 bits adapter
- Phillips® bits set, hexagon, Pozidriv ®, Torx®, resitorx®
- 1/4 screwdriver bits
DRAWER 3:
- Combination wrenches set : 7-8-10-11-12-13-14-15-16-17-18-19-2224-27-29-30-32
- 2m short Measure
- hexagonal keys with spherical head
- Adjustable wrench
- 1/20th vernier caliper, bimaterial cutter with retractable blade, padlock,
feeler gauge, carbide scriber, rule
CPP-135M2
CPP-135M3
17
T
BUY THE TOOLS SE
U
SAM OFFERS YOBINET !
THE ROLLER CA
6 DRAWERS ROLLER
CABINET WITH ALUMINIUM
TRAY + 200 TOOLS
IN MODULES
CPP-200SV
3 electrician’s Slotted screwdrivers :
3 x 100 -4 x 100 - 5,5 x 150
2 mechanic’s Slotted screwdrivers :
6,5 x 150 -8 x 150
2 Phillips® screwdrivers : N°1 - N°2
7 Torx® screwdrivers :
10 x 80 - 15 x 80 - 20 x 100 25 x 100 - 27 x 115 - 30 x 115 - 40 x 130
10 hollow offset tubular socket wrenches 8 to
19 mm
9 hexagonal keys set :1,5 to 10 mm
9 hexagonal keys set : 8 to 40 mm
1 rack with 9 spherical hexagonal keys
male wrenches : 1,5 mm to 10 mm
1 rack with 9 offset male Resistorx® wrenches :
8 to 40 mm
9 long hexagonal keys: 1,5 to 10 mm
1 self-retracting blade cutter
1 padlock
1x3m short tape measure
1 set of 15 bits + 1x ¼ bit holder
1 set of 5 helical pullers
1 pen light
1 adaptator ¼ - ¼
1 monkey wrench. L = 238 mm
1 high capacity lock grip plier. L = 220 mm
1 bimaterial multigrip plier. L = 250 mm
1 universal plier. L = 165 mm
1 diagonal cutting plier. L = 165 mm
1 electrician straight half-round nose.
L = 160 mm
1 chisel
1 punch : ø 3 mm
18
200 TOOLS IN 4 FOAMS
CPP-200M
WITH ALUMINIUM TRAY
+ 200 TOOLS
CPP-200M1
CPP-200M2
CPP-200M3
CPP-200M4
CPP-200MZ
CPP-200M1
POLO SHIRT AND SHIRT OFFERED
SERVI-640 6 drawers roller cabinet
DRAWER 1
- 9 hexagonal keys set from from 1.5 to 10mm + 9 Torx® Key from 8 to 40 + 9 hexagonal keys
with spherical head keys + 9 long hexagonal keys from 1.5 to 10mm
- Cutter with auto retractable blade, padlock, 3m short measure
- Puller set, electrician's knife, pen light, adjustable wrench,
- 7 Torx® screwdrivers
- Set of 4 screwdriver blades with handle
DRAWER 2:
- 10 socket wrenches set: 8-10-11-12-13 -14-16-17-18-19
- 18 combination wrenches set: 7-8-10-11-12-13-14-15-16-17-18-19-22-24-27-29-30-32
- 4 circlip pliers set
CPP-200M2
DRAWER 3:
- 4 pliers set: Lock grip pliers, multigrip pliers, combination pliers, cutting pliers
- 1 punch
- 1/2 pass trough sockets set and accessories: 1/2 ratchet , 1/2 extension 75mm,
1/2 ratchet adapter,
- 1/2 pass trough sockets : 10-11-12-13 - 14-15-16-17-18-19
- 1/4 pass through sockets and accessories: 1/4 ratchet, 1/4 extension 75mm,
1/4 ratchet adapter, drive spinner, 1/4 screwdriver sockets
- 1/4 pass trough sockets: 4-5-5,5-6-7 - 8-9-10-11-12-13
- Phillips® bits set, hexagon, Pozidriv®, Torx®, Resistorx®
- 5 drift punches set
DRAWER 4:
- 7 screwdrivers set
- 2 trimaterial hammers, 1 hammer
- 1 flat chisel, a precision cape chisel
CPP-200M3
CPP-200M4
SWEATSHIRT
+ POLOSHIRT
19
WEBSITE : WWW.SAM.EU
6 DRAWERS ROLLER
CABINET WITH
ALUMINIUM TRAY
+ 245 TOOLS IN FOAM
CPP-38MZ
CPP-13MZ
CPP-37MZ
CPP-245Z
New generation roller cabinet SERVI-640L
CPP-13MZ :
1 short measure 2m, 4 circlip pliers set, 5 pliers set,
1 self-tightening clamp pliers, 1 lock-grip pliers
CPP-70MZ :
7 Torx® screwdrivers, 5 slotted screwdrivers, 2 Phillips®
screwdrivers , 1 extension, 1 radio screwdriver socket,
1 Torx® keys rack, 1 hexagonal keys rack, 1 knife,
1 plastic component removal set.
CPP-80MZ
CPP-4MZ
CPP-70MZ
CPP-80MZ :
1 / 4' short socket set from 3.2 to 14 mm, 1 / 4' long
socket set from 7 to 13, 1 ratchet 1 / 4'', 1 extension 1 / 4
, 2 extensions one flexible, 1 unversal joint 1 / 4'', socket
Set 3 / 8'' from 10 to 22 mm, 1 ratchet 3 / 8'', 1 drive
sliding tee, 2 extensions, 1 ratchet 1 / 2'', socket set
1 / 2'' from 16 to 32 mm, 2 extensions 1 / 2'',
a screwdriver socket 1 / 4'', 1 feller gauge set
CPP-37MZ :
12 ratchet combination wrenches 8 to 19 mm, injector
keys 8 to 17 mm, hydraulic brake fittings wrenches
10-11-12/13-14, 10 angled open-socket wrenches
8 to 19 mm
CPP-38MZ :
1 magnetic extension, 1mirror with extension,
1 graver, 1drift punches set, 2 hammers SAMSOPlus,
1 sledgehammer, 1 set of 25 drills, 1 multimeter.
CPP-4MZ :
1 stip led light, 1 pocket lamp,
1 13 MM BATTERYPOWERED DRILL
SAM OFFERS TO YOU
CPA-4Z :
3 impact sockets ½ for LV wheel nuts, 1 1/2 impact
wrench, 1 DYNATECH® with fixed ratchet 20-200 Nm.
LV MECHANICS
131 TOOLS SET*
CP-131-A :
7 Torx® screwdrivers
7 Screwdrivers / Slotted Head : 3-4-5, 5-6, 5, 8mm
/ Phillips® : N° 1 et 2
Punch Tools
1/4 sockets ,accessories and wrenches
20 sockets and accessories
1/2 Hex sockets and accessories.
12 ratchet wrenches set
10 hollow offset tubular socket wrenches 6x6 hex
4 pliers
HGV MECHANICS
166 TOOLS SET*
CP-166-A :
* Set sold without
roller cabinet
20
7 slotted screwdriver - N° : 3-3,5-4-5,5-6,5-8
7 screwdrivers Phillips® 0-1-2-3 - Pozidriv® : 0-1- 2
7 Torx® screwdrivers - N° : 10-15-20-25-27-30-40
* Set sold without
10 impact Tools
roller cabinet
7 drift punches, a chisel
4 circlip pliers
25 sockets and accessories 1/4
27 sockets and accessories 1/2
15 "truck" sockets 3/4 - 6 point sockets : 19-21-22-24-26-27-28-30-32-36-38-41-46-50-55
3/4 ratchet socket - 3/4 socket 3/4 : 29 (CH-29) and 33 (CH-33)
12 combination wrenches : N° 7-8-10-11-12-13-14-15-16-17-18-19
6 large combination wrenches - N° 22-24-27-29-30-32
10 socket wrenches 6x6 point - N° : 8-10-11-12-13-14-16-17-18-19
12 ratchet combination wrenches - N° : 8-9-10-11-12-13-14-15-16-17-18-19
Empty module
4 pliers
SAM SIMPLIFIES
TS
N
E
M
E
V
O
M
R
U
O
Y
TEXTILE BAG WITH TROLLEY
BAG-7
Allows to transport tools and a laptop.
Equipped with two tool holders panels
1 large pocket and several small internal pockets.
1 large pocket.
The two large pockets feature a zipper
Pocket for storage of the laptop.
2 side pockets.
Extendable handle.
Trolley: height 970 mm.
TROLLEY TRAVEL BAG
WITH 100 TOOLS
CP-100BAZ
Combination wrenches 8 to 19,
1 adjustable wrench,
1 rack of 9 hexgonal keys,
1 measurement 3 meters,
1 box with 1 / 4'' sockets,
4 pliers set,
5 drift punches set,
1 SAMSOPLUS hammer,
1 magnetic retriever,
3 electrians pliers set,
1 electricians knife,
1 feeler gauge set,
1 inspection mirror,
4 precisiosn screwdrivers set,
1 trolley
21
STORAGE SPACE
TEXTILE BAG WITH TROLLEY
BAG-3
Equipped with 2 tool holders panels
Large pocket on the front with zipper.
Extendable handle.
Trolley: height 970 mm.
Overall dimensions of the bag: 440 x 380 x 140 mm.
BACKPACK
BAG-5
Adjustable straps and belt.
2 side pockets, one with closure.
1 large front pocket with zipper and internal storage
(pens, etc ...).
Possibility to fix three tools holders panels .
1 mobile phone pocket.
You can find some set
in page 6 and 7.
TOOL BAG
For more information you can
join : + 33 4 77 92 25 11
TOOL BAG
BAG-2
BAG-1
Dimensions : 420 x 250 x 270 mm.
Dimensions : 550 x 250 x 300
22
BIMATERIAL
TOOL BOX
BOX-1Z
Folding Handles.
Closed by padlocks (not supplied).
Nylon covers.
4 plastic feet.
Dimensions : 540 x 100 x 200 mm.
2 small boxes : 540 x 50 x 100 mm.
Supports 30 / 40 kgs.
RESISTANT
SECURITY
STRONG
COMFORTABLE
Fiberglass cover with a rib structure for
high strength and impact resistance.
Closing the box with a
padlock (not supplied).
Ribbed galvanized rods to increase
the lifetime of the box in response to
repeated opening and closing.
The corners are protected with pads to
avoid scratching delicate work plans.
POLYPROPYLENE BAG
WITH TROLLEY
5 DRAWERS CHEST
TVR-T
Reinforced structure. Drawers on ball be aring slides.
Two recessed side handles. Hinged lid.
Key lock. Compatible with storage trolley SAM-514-PCV
SAM-522-SCV
Reinforced shell resistant up to a pressure of 90 kg.
Integrated trolley with wheels mounted on bearings.
The trolley is positioned across the width of the bag
which greatly improves handling.
Removable top panel sided.
Removable bottom panel front.
The panels are fitted with elastic strips SAMFIXE and to store tools.
The panels are locked inside the case.
Opening with stops at 90 °.
Reinforced hinges. Reinforced handle.
Double lock. Label holder included.
RESISTANT
Ball slides with locking drawers.
Carrying handles hardened steel made for models 6 and 12 drawers.
Closing with a key or padlock (not supplied).
Models 6 and 12 drawers have a hinged lid.
Dimensions: 368 x 660 x 305 mm.
23
SOCKETS AND
ACCESSORIES SPACE
SOCKET SET 1/2 AND ACCESSORIES
WITH CONSTRUCTION RATCHET
75-SHC23Z
Construction ratchet square 1/2, 1 extension 1/2 125mm, 1 extension 1/2 250mm,
1 unirversal joint 1/2,19 sockets 1 / 2 : 8-9-10-11-12-13-14-15-16-17-18-19-21-22-23-24-27-30-32
1/4 SOCKETS
AND
ACCESSORIES
SET - 45 TOOLS
CONSTRUCTION
1/2 RATCHET
73-R45Z
S-157B
12 sockets, 6 hex: 3.2 - 4 - 5 - 5.5 - 6 - 7 - 8 - 9 - 10 - 11 - 12 - 13 - 14 mm.
- 1 bimaterial ratchet
- 1 jointed extension
- 3 extensions: 50, 100 and 150 mm.
- 1 joint
- 1 sliding handle
- 1 bit-holder socket
- 7 bits 6 hex: 2-3-4-5-6-7-8 mm.
- 7 Résistorx® bits: 10-15-20-25-27-30-40
- 4 slotted bits: 4.5-5.5-6.5-8 mm.
- 3 Phillips® bits: 1-2-3
- 3 Pozidriv® bits: 1-2-3
Mechanism protection against water intrusion and
sand. Increased longevity compared to a standard
ratchet.
Bimaterail handle. Reversing lever.
Standard square drive 1/2.
PUSH RATCHET 1/2"
WITH REVERSING
LEVER
3°3°
S-158P
Bright polished chrome finish.
Forged chrome vanadium steel.
120 teeth, 3 ° increment
Bi-material handle.
PUSH system: locking and unlocking of the socket.
1/2" SOCKETS AND
ACCESSORIES
SET - 23 TOOLS
1/4 SOCKETS AND
ACCESSORIES SET - 17 TOOLS
75-SH23Z
- 1 x 1/2" ratchet
- 2 x 1/2" extension 125 mm / 250 mm /
standard universal joint
- Hex sockets: 8-9-10-11-12-13-14-15-16-1718-19-21-22-23-24-27-30-32
73-R17Z
- 12 sockets, 6 hex: 4-5-5.5-6-7-8-9-10-11-12-13-14 mm.
- 1 bimaterial ratchet
- 1 bimaterial jointed extension
- 2 extensions: 50 and 150 mm.
- 1 universal joint
1/2 SOCKETS
AND
ACCESSORIES
SET
75-SH28Z
Ratchet 1 / 2 "
Sockets 1 / 2 of 8-9-10-11-12-13 14-15-16-17-18-19-21-22-23 24-26-27-28-29-30-32.
2 extensions
24
mm 4
14
3/4 SOCKETS AND
ACCESSORIES
SET - 17 TOOLS
78-CH16Z
- 12 sockets: 19-21-22-24-2730-32-36-38-41-46-50 mm
- 1 slide handle
- 1 handle
- 1 reducer: 3/4 --> 1/2
- 1 ratchet
- 1 extension: 400 mm
2
TOOLS IN 1,
GET THE TOOL
OF TOMORROW TODAY!
HANDINESS
Reversing Lever
ACCESSIBILITY
Thin
IMPROVED COMFORT
Pass-through-system
PASS THROUGH RATCHETS
AND SOCKETS SET
CP-77Z
1/2 ratchet with pass through extension. Square adapter
- Sockets : 21 to 32
- 2 bimaterial ratchets
- 3 ratchet adapters (1/4 and 3/8)
- 30 bits:slotted head, Phillips®, Pozidriv®, Torx®,Résistorx®, 6 point
- 11 sockets for small-size ratchet: 4 to 13 mm
- 10 sockets for large-size ratchet: 10 to 19 mm
- 2 extensions
- 1 hafted extension 1/4 with socket bit holder 1 /4
ERGONOMICS
Thanks To Bimaterial Handle
QUICK NESS LOW
COMPATIBILITY
Increments
Adapters for standard sockets
PASS THROUGH
RATCHETS AND
SOCKETS SET
CP-61Z
PASS THROUGH
SOCKETS AND
ACCESSORIES
WITH 1/2 RATCHET
- 2 bimaterial ratchets
- 3 ratchet adapters (1/4 and 3/8)
- 30 bits:Slotted head, Phillips®,
Pozidriv®, Torx®, Résistorx®, 6 point
- 11 sockets for small-size ratchet:
4-5-5,5-6-7-8-9-10-11-12-13 mm
- 10 sockets for large-size ratchet:
10-11-12 -13-14-15-16-17-18-19 mm
- 2 extensions (75 mm)
- 1 hafted extension 1/4 with socket bit holder 1/4
CP-16Z
1/2 ratchet with pass through extension
Square adapter
Sockets : 21-22-23-24-25-26-27-28-29-30-32
JACKET
25
KEYS AND
WRENCHES SPACE
WORKING
JACKET
6 RATCHET
RING
WRENCHES SET
WORKING
TROUSERS
8 RATCHET
COMBINATION
WRENCHES SET
12 HINGED RATCHET
COMBINAISON
WRENCHES SET
106C-J6Z
50C-J8Z
50-CTJ12Z
8x9, 10x11, 12x13, 14x15,
16x18, 17x19 mm.
Chrome plated polished
8 - 10 - 11 - 13 - 16 - 17 - 18 - 19 mm.
- Chrome-plated polished.
8-9-10-11-12-13-14-15-16-17-18-19 mm.
- Chrome-plated polished. 180 ° hinged ratchet
8 RATCHET COMBINATION WRENCHES SET
12 COMBINATION
WRENCHES SET
8 OPEN-END
WRENCHES SET
50-J8Z
50-J12Z
10-J8NZ
8 - 10 - 11 - 13 - 16 - 17 - 18 - 19 mm.
7 - 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18 19 - 22 - 24 mm.
8x9 - 10x11 - 12x13 - 14x15 - 16x17 - 18x19 - 21x23 - 22x24 mm.
5 T HANDLE SOCKET
WRENCHES SET
8 HOLLOW ANGLED
SOCKET WRENCHES SET
12 HOLLOW ANGLED
SOCKET WRENCHES SET
63-BT-J5
94-SDJ8Z
94-SDJ12Z
SAMSOFIX: New assembly process patented by SAM
providiIing the control of all parameters generated:
- Control of the transmission of torque.
- Control of the contacts for sliding assembly.
dimension: 8-10-12-13-14
10 - 11 - 12 - 13 - 16 - 17 - 18 - 19 mm
- Chrome-plated polished
- 6x6 point
7 - 8 - 10 - 11 - 12 - 13 - 16 - 17 - 18 - 19 - 22 - 24 mm.
- Chrome-plated polished
- 6 point
26
7 HEXAGON KEYS
PRACTICAL :
"PUSH BUTTON"
TO AUTOMATICALLY
EXIT THE KEYS
62-MP7Z
2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm
8 RESISTORX®
KEYS
8 TORX® KEYS
66-MP8Z
9 - 10 – 15 - 20 – 25 - 27 - 30 – 40
59-MP8Z
9 - 10 - 15 - 20 - 25 - 27 - 30 - 40
6 L-HANDLE HEXAGON
KEYS SET
60-PTJ8
Dimension : 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10.
9 RESISTORX®
KEYS RACK
9 SHORT HEX
KEYS RACK
9 LONG HEX
KEYS RACK
59-R9A
62-R9A
63-R9A
8 - 9 - 10 - 15 - 20 - 25 - 27 - 30 - 40 mm.
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
9 TORX®
KEYS RACK
9 LONG HEX WITH
SPHERICAL HEAD KEYS
66-R9A
67-AR9A
8 - 9 - 10 - 15 - 20 - 25 - 27 - 30 - 40 mm.
1,5 - 2 - 2,5 - 3 - 4 - 5 - 6 - 8 - 10 mm.
27
SCREWDRIVERS SPACE
6 SLOTTED HEAD
AND PHILLIPS®
SCREWDRIVERS SET
T-J1Z
3X
1X
2X
: 4 x 100 - 5,5 x 100 - 6.5 x 150
: 8 x 150
: 1 x 100 - 2 x 125
TOTAL SAFETY
The good imprint size with
a quality screw
CHROME VANADIUM
STEEL
Premium chrome coating.
SEVERAL LENGTHS
by imprints.
6 SLOTTED
HEAD AND
POZIDRIV®
SCREWDRIVERS
SET
HIGH PRECISION
heat treatment.
COLOR
Instant imprint spotting.
T-J2Z
3X
1X
2X
: 4 x 100 - 5,5 x 100 - 6.5 x 150
: 8 x 150
: 1 x 100 - 2 x 125
1000V INSULATED
BIMATERIAL
SCREWDRIVERS SET
ZTB-J6Z
TZ-J7Z 4 x 3 x 100 - 3.5 x 100 - 4 x 100 - 5.5 x 125
2 x N° 1 x 125 - 2 x 150
Complies with NF ISO 5749 and CEI 60900 standard.
1000V
INSULATED
BIMATERIAL
SCREWDRIVERS
SET
TZ-J7Z
4x
2x
28
3 x 100 - 3.5 x 100 - 4 x 100
5.5 x 125 mm
N° 1 x 125 - 2 x 150
ERGONOMICS:
4 supports zones for a powerful and comfortable tightening.
Elastomer materials resistant to hydrocarbons.
Soft silky and anti-heating for a perfect grip.
6 sized handle to transmit the best tightening torque.
INDELIBLE MARKING
Perfect reading of the blade dimension and of the imprint.
DELIVERED IN A REUSABLE
TEXTILE CASE
5 TORX®
SCREWDRIVERS SET
5 RESISTORX®
SCREWDRIVERS S1 SET
T-J3Z
T-J4Z
10 x 80 - 20 x 100 - 25 x 100 - 30 x 115 - 40 x 130
10 x 80 - 20 x 100 - 25 x 100 - 30 x 115 - 40 x 130
EASY HANGING
on any supports.
ROUND AND SMOOTH TIP
perfectly adapted to the hand palm. Head without jointing plane.
6 PRECISION
SCREWDRIVERS SET
5 SLOTTED HEAD AND
PHILLIPS® SCREWD
RIVERS SET EXTRA
SHORT BLADE AND
HANDLE
276-J6Z
T-J5Z
3X
2X
3X
2X
: 1,5 - 2 - 2,5
: 0 - 00 - 1
: 2,5 x 50 - 4 x 25 - 5,5 x 35
: 1 x 25 - 2 x 35
10 BITS AND 1 BIT
HOLDER RACK
E-112-J11
- Convenience: : Bits and bits
holders on the same rack.
Belt clip.
3-4-5-6
PH1 - PH2 - PH3
PZ1 - PZ2 - PZ3
29
HAMMERS SPACE
SAMSOPLUS®
HAMMERS
Pulling force
ELECTRICIAN'S HAMMER
SAM
200%
312-TMZ
Norm
NF E 71.012, ISO 15601
Ref.
H
mm
C
mm
L
mm
g
312-16TMZ
139,6
15,6
257,6
241
312-18TMZ
139,6
18
276
SAFETY
SAM
Driving
force
Head to handle link is secured with
composite epoxy resin.
Pulling force : twice the norm
comparing to a wood handle.
Driving force : 4 times the norm.
400%
297
Norm
1
JOINER'S HAMMER
COMPOSITION
2
1/ Fiber glass - shapped bone perfect
rigidity. No risk breaking handle.
Withstands environmental changes
(temperature, humidity).
2/ Polypropylene - less vibration
3/ Overmoulded with SEBS - gives the
handle all its ergonomics
3
307-TMZ
NF E 71.011, ISO 15601
COMFORT
Ref.
H
mm
C
mm
L
mm
g
307-30TMZ
119,6
29,6
302,6
665
Overmoulding provides an ergonomic
shape for ideal grip.
PRECISION
Conical, finely polished head.
RIVETING HAMMER
310-TMZ
NF E 71.014, ISO 15601
30
Ref.
H
mm
C
mm
L
mm
g
310-30TMZ
93,5
30,5
303,5
565
310-32TMZ
100
32,5
305,5
665
310-36TMZ
106
35,5
308,5
795
310-40TMZ
110
40,5
333,5
1010
310-42TMZ
115,5
42,5
335,5
1210
310-45TMZ
128
45,5
338,5
1460
310-50TMZ
138
50,5
366,5
1890
310-55TMZ
144
55,5
371,5
2290
H
C
L
6 FILES
SET
LPJ-1Z
2 flats
- 1 half round
- 1 round
- 1 square
- 1 triangular
Bimaterial handle
POWER HAMMER
RIVETER
Hickory handle to increased solidity and
resistance.
359-3Z
SAFETY
Coupling: Metal corner to avoid loss + resin
(araldite®) to prevent wood drying out.
With adjustment screw
- 2 interchangeable jaws and drop
retainer
- Drop retainer
- Opening capacity: 80 mm - maxi. 225mm
- Rivet maximum capacity - Alu : 5 mm Steel : 5 mm - Stainless : 4 mm
Copper : 4.8 mm Aluminuim : 5mm
HICKORY RIVETING HAMMER
310-30NZ
310-32NZ
LOCK GRIP PLIERS
310-36NZ
310-40NZ
212-25Z
310-50NZ
HIGH
CAPACITY
LOCK GRIP
PLIERS
5 LONG DRIFT
PUNCHES SET
212-30Z
7-TR5AZ
2.5 – 3.5 – 5 – 7 – 9 mm.
31
BUILDING SPACE
DOUBLE-EDGED
STEPPED DRILLS
FEL-7
The problems of jamming and clogging of the
chips are removed. The chamfer facilitates
removal of the drill when drilling a through hole.
Surface: Rectified / titanium nitride coated.
Right cut. Point angle: 118 °. Angle Floor: 90 °.
Dimensions 6-37
SET OF 8 COOKIE
CUTTERS AND A DRILL FOR BORING
EMP-13J
Chrome vanadium steel.
Quality class 12.9.
Composition:
- 8 cookie cutters A 15.2 - 18.6 - 20.4 to 22.5 - 28.3 to 37 - 47 - 54 mm,
- A bit boring,
- 1 box of 50g of lubricating paste,
- A ball bearing screw M10
- A ball bearing screw M12
- A ball bearing screw M16.
CRIMPING PLIERS FOR
PROTECTIVE TIPS
241-37
For crimping face without adjustment, the protective tips on flexible cable
from 0.14 to 16 mm2.
Automatic unlocking limit switch.
Brown body hardened steel made.
Equipped with ergonomic handles for a non-slip grip.
Length: 250 mm.
CRIMPING PLIERSL
FOR PRE-INSULATED
TERMINALS
241-35
Crimping pliers for insulated terminals with section from
0.5 to 6 mm2.
Ergonomic handle to prevent slippage during use.
The trigger system of the safety catch ensures the reliability
of the pliers.
AUTOMATIC WIRE
STRIPPERS
240-20A
For cutting and stripping electrical conductors.
Bi-material handle
Automatic adjustment of the blades according to the
thickness of the insulation.
Open automatically after stripping.
Light and durable : Polyamide body reinforced
with steel parts.
Depth adjustment stripping.
Adjustment of the stripping
force according to the diameter
of cable.
Capacity of the cable cutter:
- Stranded: 6 mm2,
- Single strand: 4 mm2.
32
CABLE SHEATH
STRIPPERS
220-28
To strip all electrical PVC or rubber cables.
Setting the cutting depth with the screw on the back.
Equipped with an auto rotating blade knife
Equipped with a hook blade to strip flat cables.
Dimension : 8-28
CUTTIN
G HEIG
HT
109 M
M
HACKSAW FRAME
791
2
3
mm
1
100
100
KG
CUTTER
378-27
25 mm.
SELF-RETRACTING
BLADE CUTTER
378-40
Safety knife.
• Blade automatically retracts after use.
• Zamak body.
CUTTER BLADE
DIFFENTIAL THREAD SCREW
379-25
10 blades box
1
Fixed screw
Power and
resistance
2
Rotation
of the screw
GENERAL
PURPOSE SHEARS
331-16
3
Fast
approach
To cut aluminium, leather, rubber, plastic, linoleum,
strip iron, nylon…
Thick and sharp blades.
Stainlless treated steel.
ABS sheathed handle. Length: 165 mm.
Approching
screw for
opening
• ALLOW TO CRIMP
• BLOCKING SYSTEM INPOSITION CLOSED
PULLER WITH 2/3
INTERCHANGEABLE LEGS
485-1J3
Inside and outside grip
Convertible in 2 or 3 jaws
Delivered with 2 sets of 3 inside and outside legs
- Capacity :
Inside : 180 mm max
Outside: 220 mm max
- Grip power: 6 T
33
BUILDING SPACE
15 HOLESAWS
SET
705-C-15
Holesaws: ø 16.-19 - 21 - 24 25 - 29 - 32 - 37 - 40 - 48 - 51 54 - 60 - 73 - 83 mm. 2 chucks.
1 extension. 1 drill guides
in Hss: ø 6,35 mm X 82 mm.
1 extension of 300 mm.
PUNCH KIT
694-C32-N
Package includes:
1 ergonomic handle to absorb the vibrations
29 punches from 2 to 50.
1 centering tip.
1 chuck diameter from 2 to 50 mm.
PIPE CUTTER
620-12
SLIDE-TYPE
PIPE CUTTER
For copper tube and aluminum.
Capacity: 3 to 30 mm.
620-11
For copper tube and aluminum. Capacity: 3 to 30 mm.
PIPE WRENCH
STILLSON MODEL
632-18
Length : 440 mm.Opening : 60 mm.
POWER :
Forged body and jaw.
PRACTICAL
Double spring system ensuring effective attachment to the tube.
MULTIGRIP
PLIERS WITH
PUSHBUTTON
201-25Z
3 BIMATERIAL
PLIERS SET
209-J3Z
Universal pliers 160 mm
Cutting pliers 180 mm
Multigrip pliers
L : 250 mm. Capacity : Ø 60 mm.
- 9 positions.
- Push button locking
- Bimaterial sheath
PLIERS WITH
SPRING
34
BOLT CUTTERS
ROBUST AS A TITAN
POWER
COMFORT
12 mm diameter cutting capacity
Covered handles, lightness and
manoeuvrability through the arm
tube.
COMPACTEDNESS
The blades are assembled with SAM patented rivet
ROBUSTNESS
ROBUSTNESS
Forged forearms.
Fully forged arms to resist construction site
extreme conditions.
Possible straightening possible in case
of accidental torsion.
POWER
Non deformable. Forged blades.
COMPACTNESS
COMFORT
Fixing blades with SAM patented
rivet . Easy and quick adjustment by
a single screw.
Sheathed handes.
AXIAL CUTTING
ADJUSTMENT
Cutting angle designed to penetrate
and cut steel up to 140 Kg / mm ².
Easy with a single screw.
ADJUSTMENT
Easy with a single screw.
SAMTITAN BOLT
CUTTER
STANDARD BOLT
CUTTER TUBE ARMS
CB-2-AT
L-95-2
SAM
C1 60
Kg/mm2
C2 80
Kg/mm2
C3 110
Kg/mm2
C4 140
Kg/mm2
E mm
e mm
L mm
L“
Weight
Kg
Blades
SAM
C4 140
Kg/mm2
L mm
L“
Weight
Kg
Blades
CB-2-AT
12
11
9
8
102
155
760
30"
4,1
CB2AL
L-95-2
8
750
30"
3,6
CB2AL
35
MEASURING
SPACE
10 PRECISION MEASUREMENT AND
MARKING OUT TOOLS SET
DIGITAL CALIPER
710-P15Z
710-J13
Hardened stainless steel made.
LCD display.
Interchangeable unit of measurement mm / inch.
Depth Gauge: flat.
Possibility to connect to a computer
Accuracy 0.01 mm
Maximum capacity: 150mm
Graduated Length: 150mm
1 caliper 1 / 50
2 micrometers 25mm and 50mm
1 depth gauge,
2 squares,
1 centre punch,
1 compass,
1 carbide tip,
1 rule
BIMATERIAL SHORT TAPE MEASURE
SAM
UB-216
Lm
l mm
A mm
B mm
e mm
2
16
59
62
26
UB-316
3
16
59
62
16
UB-519
5
19
68
75
31
UB-825
8
25
87
44
37
UB-1025
10
25
87
44
37
>RESISTANT:
The tape square is steel made, it is secured with
3 steel rivets, which can withstand heavy use.
The tape is steel made with a nylon coating to
limit the phenomenon of graduation erasure
>READABLE:
The matt tape makes ideal reading whatever the
light conditions or reflection. This directive applies
to dimensional measuring instruments (MI-008)
MEDIAFLEX®
ABS CASE
2 METERS
>HANG BELT:
SAM bimaterial short measue are equipped with
a removable belt clip depending on your usage
habits.
> LOCKING TAPE:
The lock button is made in a form which
facilitates its use and it fits perfectly in the
housing to maintain a good compactness.
3 METERS
5 METERS
UD-216N
U-210
U-519
2 m x 16 mm.
3 m x 16 mm
5 m x 19 mm
SAMFLEX®
ZAMAK CASE
- Blade lock
- Ultra-resistant and ergonomic case
With locking system.
Compact and ultra light casing.
Automatic tape reverse.
36
>ERGONOMIC:
The housing provides a perfect grip. Possibility to
use the measure placed on a countertop.
3 METERS
2 METERS
UD-316N
U-109
3 m x 16 mm.
2 m x 16 mm.
SAMFLEX
GO WHERE YOUR EYE CANNOT GO!
5.5 MM VIDEOSCOPE
344-23
Easy inspection at any time, in all circumstances. Detachable cable
(IP67). LED with dimmer light sources (0-275Lux/4cm) extra-large 3.5"
TFT screen. Quick save of videos and snapshots 1.5x zoom. Innovative
function "vertical symmetry" (reverse image). 2GB Memory Card can
hold more than 25 000 photos or videos. Power battery (4 hours of
autonomy). Motherboard connector and grommet for cord improved.
More compact design. 3 angle drive: 70 ° / 90 ° / 110 °
4.9 MM VIDEOSCOPE
WITH ANGLE DRIVE
USB VIDEOSCOPE
WITH ANGLE DRIVE
344-24
344-22
Easy inspection at any time, in all circumstances. Detachable cable
(IP67). LED with dimmer light sources (0-275Lux/4cm) extra-large
3.5" TFT screen. Quick save of videos and snapshots 1.5x zoom.
Innovative function "vertical symmetry" (reverse image). 2GB Memory
Card can hold more than 25 000 photos or videos. Power battery
(4 hours of autonomy). Motherboard connector and grommet for cord
improved. More compact design. 3 angle drive: 70 ° / 90 ° / 110 °.
Probe includes two cameras with a 2 LED sources. A front view and a
side view. Switch "on line" to select the front view or side view during
the inspection. IP67: Waterproof, oil, fuel and claws
Probe comprising 2 cameras in 1 with two LED light sources. A
front view and a side view. The switch "in line" allows to select
the front view or the side view during the inspection. Adjusting
the light intensity IP67: Waterproof, oil, fuel and claws. The
images and videos with sound can be viewed directly on any
computer with the USB cable. Sound recording. CD-ROM with
installation software included (Windows XP, Vista, 7)
VGA HIGH-DEFINITION
CAMERA
USB VIDEOSCOPE
344-26
Ideal for saving time. Connects directly to your computer via USB
cable. Allows to view directly on screen and save photos, videos.
Adjusting the light intensity.
Details:
detachable sensor of 5.5 mm diameter,
length 1m.
Installation software.
Mirror 110 °.
Dimension of the camera head: 20mm. Diameter of camera : 6mm
VGA resolution: 640 x 480. Adjusting the intensity of light with 4 LEDs
Depth of field 1 ~ 6cm
Working temperature: -20 º C ~ 65 º C
Resistance IP67
Video Format: NTSC
344-20
EXTENSION 2 IN 1
WITH DUAL CAMERA
344-21
Ability to look straight or 90 ° with the use of the switch.
Camera 4.9 mm diameter
Length of the camera: 1m. Length before the switch length:
70cm.
Possibility of using this device on the SAM range.
ARTICULATED HIGH
DEFINITION
344-25
Can be used on any SAM videoscope with detachable cable .
Probe 6mm diameter and 1m long with one end
hinged to a view of 360 °. Powerful LED light sources.
Articulated angle in both directions. Possibility of night vision.
Diameter of the camera: 6.5 mm
Working temperature: -20 º C ~ 65 º C
Protection: IP67
Video Output NTSC
Articulation 155 º above / 155 º down
Radius articulation 50mm + / - 5mm
5.5 MM MEMORY
SHAPE CAMERA
344-27 Length: 1m
344-28 Length: 2m
344-29 Length: 3m
37
TORQUE CONTROL
SPACE
Tighten with precision,
record data.
This wrench can perform a high precision torque and angle tightening.
Ideal for auto mechanics maintenance.
FEATURES:
Up to 340 Nm depending on model.
Tightening and loosening torque: accuracy + / -2%.
Unit numbering of wrench and inspection report.
Traceability by storing values.
Memory capacity: 999 values.
Torque units: Nm, Ft.lb, kg.cm, in.lb.
Operating data with the SAM sofware
DYCA and connectivity with mini USB cable.
Hardened steel tube.
Measurement mode: peak.
Bimaterial handle
3 LEDs to inform you
on the desired torque value:
72 teeth ratchet,
5 ° increments
15 ° hinged ratchet
The 3 LEDs light up at the same
time to inform you that
the preset angle is reached.
DYCA-340Z
All wrenches are delivered in a plastic box with SAM DYCA software, the
mini USB cable, 2 x LR6, an inspection report and EC ESD certificate.
Visual trigger point (3 LEDs) and aubible (beep)
NF ISO 6789, NF ISO 3315
DYCA-135Z
DYCA-340Z
Measuring range (N.m)
13,5 -135
34 - 340
Measuring range (Ft-Lb)
9,96 - 99,6
25,1 - 251
Measuring range (Kg-cm)
138 - 1380
347 - 3470
Measuring range (IN-Lb)
119 -1190
301 - 3010
+/- 2%
+/- 2%
Torque accuracy
Angle measuring range (degrees)
0 to 360°
0 to 360°
Angle accuracy (for an angular velocity
from 10 °/sec to 180 °/s)
+/- 2° + 1%
+/- 2° + 1%
Ratchet
3/8'' ratchet
1/2'' ratchet
5°
5°
clockwise or counterclockwise
clockwise or counterclockwise
460
664
Increments
Measuring direction
Wrench length (mm)
Weight (kg)
1,35
1,65
Operating temperature (°c)
5 to 42°C
5 to 42°C
Operating temperature (°f)
41 to 108°F
41 to 108°F
Storage Temperature (°c)
-20 to 50°C
-20 to 50°C
Storage Temperature (°F)
-4 to 122°F
-4 to 122°F
Humidity up to 90%
Supply type : 2 x AA - LR6 - 1.5 volt batteries
Standards
38
up to 90%
up to 90%
2 x AA - LR6 - 1,5 Volts
2 x AA - LR6 - 1,5 Volts
ISO 6789 - Type 1 - Classe C
ISO 6789 - Type 1 - Classe C
2004/108/CE
2004/108/CE
2002/95/CE
2002/95/CE
DYCA-135Z
ELECTRONIC TORQUE
WRENCH DYNALIGHT C
FOR RECTENGULAR ENDS
For more information
www.sam.eu
THIS WRENCH ALLOWS TO MAKE VERY PRECISE TIGHTENING AND
GET A TRACABILITY WITH HIS MEMORY AND CONNECTION KIT FOR
COMPUTER.
FEATURES
- Type 1 - Class C.
- Up to 340 Nm depending on model.
- Video and audio triggering.
- Tightening and loosening: accuracy + / - 2%.
- Rectangular attachment 9x12 and 14x18 mm depending on model.
- Units Torque: Nm, Ft.lb, kg.cm, in.lb.
- Use of data with the software DYCA Sat.
- Connectivity with mini USB cable.
- Bi-material ergonomic handle resistant to hydrocarbons.
- Memory capacity: 999 values.
- Method of measurement: peak.
Complies with European directives 2004/108/EC and 2002/95/EC.
Ref
DYG-30Z
DYG-135Z
DYG-200Z
DYG-340Z
capacity
Nm
capacity
Ft.lb
ratchet
ref
ratchet
ratchet
Attachment
- Bimaterial handle
- The 3 LEDs light up at the same
time to inform you that the
preset angle is reached.
- buzzer
- deliver in plastic case
L mm
wrench only
L mm with
ratchel
3 - 30
2,2 - 22
1/4
DTC0-R
9 x 12
410
442
13,5 - 135
9,9 - 99,6
3/8
DTC0-J
9 x 12
410
450
20 - 200
14,8 - 148
1/2
DTC-S
14 x 18
470
515
34 - 340
25,1 - 251
1/2
DTC-S
14 x 18
623
670
ELECTRONIC TORQUE
TESTER
ENABLES THE PERIODIC INSPECTION OF TORQUE WRENCHES.
Accuracy + or - 1% of measured value guarantee from 5 to 100%
of the nominal value.
Viewing measured torques on the display.
PC Link with SAM-DYCA software (software on a USB key).
Traceability (all measurements are stored).
Models 70 and 400 Nm are in single piece.
Supplied with socket, USB cable, AC adapter
CAPACITY:
- Memory: 999 values in peak mode.
- Units: N.m, Ft.lb, Kg.cm, In.lb.
- Measuring modes: peak and follower.
- Outputs: USB.
Ref
Capacity
NM
Dimension hex
CMU-70
CMU-400
CMU-1000
3,5-70
10 mm
20-400
19 mm
50-1000
36 mm
OTHER FEATURES:
- Works with power.
- Measure clockwise and counterclockwise.
- Resolution of 0.01 Nm for a measure less than 100 Nm and 0.10 Nm beyond.
programmable control lines in relation to the control mode defined in the
standard NF EN ISO 6789.
- Alarm LED and audible at 90, 100 and 110% of the set value.
- Protection against splashing fluids.
- Operating temperature: 5-42 ° C.
- Storage temperature: 20-50 ° C.
39
TORQUE WRENCH DYNATECH
FOR ROUND ENDS
USER MANUAL ON
www.sam.eu
Mechanical click wrench Type II Class A.
Bi-material handle resistant to hydrocarbons.
Comfortable grip.
Scale in Nm. Range from 1 to 1000 Nm
Automatic reset.
Adjusting system of the torque with scale and micrometer.
Each wrench is numbered and delivered with a verification certicate
in accordance with DIN EN ISO 6789 standard.
Used with interchangeable ends (ratchet, double square, open end end ring end)
through the round attachment diameter 12, 19 or 30 mm.
The wrenches are delivered in plastic tube or box depending on the number of
accessories
capacity
Nm
capacity
Ft.lb
ratchet
ref ratchet
ratchet
Attachment
L mm
wrench
only
L mm with
ratchel
1-5
0,05
1/4
TC0-1/4
12
217
254
DYT-25Z
5-25
0,20
1/4
TC0-1/4
12
217
254
DYT-50Z
10-50
0,50
3/8
TC0-3/8
12
345
382
DYT-100Z
20-100
0,50
1/2
TC2-1/2
19
450
506
DYT-200Z
40-200
1
1/2
TC2-1/2
19
557
613
DYT-350Z
70-350
1
1/2
TC2-1/2
19
557
613
200-1000
4
3/4
TC-2-3/4
30
1300
1410
Ref
DYT-5Z
DYT-1000Z
BIMATERIAL HANDLE
Efficient and comfortable grip. Hydrocarbon, solvent,
brake fluid and oil-resistant materials.
EASY AND ACCURATE
TORQUE SETTING
Durability of markings on the scale and vernier. Satin
background for easy reading.
Precise graduation.
INTERCHANGEABLE ENDS
Used with interchangeable ends (ratchet, double
square, open end, ring end) thanks the round
attachment diameter 12, 19 or 30 mm.
40
DYNATECH® RANGE
MODEL WITH INTERCHANGEABLE END
ALLOWS USE FOR LOOSENING BY REVERSAL OF THE END
PUSH
Réf.
ref ratchet
capacity
Nm
resolution
Nm
ratchet
Attachment
L mm
DYTC-5-Z
DTC-O-R
1-5
0,05
1/4
9x12
197
DYTC-25-Z
DTC-O-R
5-25
0,20
1/4
9x12
270
DYTC-50-Z
DTC-O-R-J
10-50
0,50
3/8
9x12
357
DYTC-100-Z
DTC-O-S
20-100
0,50
1/2
9x12
455
DYTC-200-Z
DTC-S
40-200
1
1/2
14x18
535
DYTC-350-Z
DTC-S
70-350
1
1/2
14x18
730
120-600
2
3/4
14x18
946
DYTC-600-Z
1. 72 teeth ratchet, 5° increment.
Resistance test conducted in a
teasting laboratory according to
ISO 3315 standard: results above
standard.
2. Quick change of socket by simply
pressing the red button
3. Direction of use indicated by an
arrow
4. Product Identification: + Reference
ID number.
5. Easy and precise adjustement of
the tightening torque. Durability of
marking on the graduated scale and
sliding gauge. Satin background for
easy reading. Very precise resolution
of the scale.
6. Ergonomic handle. Efficient and
comfortable grip. Resistance to
hydrocarbons, solvents, brake fluid,
oil.
7. Resistance of the wrench. Product
design all steel. Test conducted: side
handle product falling from a height
of 1 m.
DYNATECH® RANGE
MODEL WITH FIXED RATCHET
Réf.
capacity
Nm
resolution
Nm
ratchet
L mm
DYTFZ-5
1-5
0,05
1/4
197
DYTFZ-25
5-25
0,20
1/4
300
DYTFZ-50
10-50
0,50
3/8
357
DYTFZ-100
20-100
0,50
1/2
416
DYTFZ-200
40-200
1
1/2
479
DYTFZ-350
70-350
1
1/2
632
41
MATTHEW
,
W
ORKSHOP
MAN
AGER
”An ultra co
mplete se
lection of
sockets to
face all situ
ations.”
CYLINDER HEAD
SPACE
CAR SPECIFIC
SOCKETS :
3 TRAYS WITH
132 TOOLS*
CPA-30Z
Ideal for your daily tasks
Comprising :
26 XZN male bits
26 Ribes male bits
30 Hexs male bits
32 Torx male bits
9 impacts male Torx bits
9 impacts male Hex bits
* Set sold without trolley
8 SCREWDRIVER
1/2 SOCKETS TORX
SET
7 TORX 1/2
SOCKETS SET
STJ-8R
Detail : 10, 12, 14, 16, 18, 20, 24
Detail : 20x55, 25x55, 27x55, 30x55, 40x55, 45x55,
50x55, 55x55
42
STX-J7R
8 DRIVE METRIC
HEXAGONAL
BIT SOCKETS
SC-J8R
Détail : 6x55, 7x55, 8x55,10x55, 12x55, 14x55, 17x55, 19x55mm.
1/2” SCREWDRIVER
SOCKETS RIBES SET
CP-SRJ
26 male Ribes bits
- length 50mm : 5-6-7-8-9-10-12-13-14
- length 100mm : 5-6-7-8-9-10-12-13-14
- length 120mm : 8-9-12-14
- length 200mm : 8-9-12-14
1/2” SCREWDRIVER
SOCKETS XZN SET
CP-SDJ
26 male XZN bits
- length 50mm : 5-6-8-9-10-12-14-16
- length 100mm : 5-6-8-9-10-12-14
- length 150mm : 5-6-8-9-10-12-14
- length 200mm : 8-10-12-14
1/2” LONG IMPACT
SCREWDRIVER
SOCKETS TORX
SET
CP-NSTJ
9 impact male torx bits
Length from 80 to 100mm : T20-25-30-40-4550-55-60-70
1/2” SCREWDRIVER
SOCKETS HEX SET
CP-SCJ
30 male hex bits
- length 50mm : 5-6-7-8-10-12-14-17-19
- length 100mm : 5-6-7-8-10-11-12-13
- length 150mm : 5-6-7-8-10-12-14
- length 200mm : 5-6-7-8-10-12
1/2” LONG IMPACT
SCREWDRIVER
SOCKETS
HEX SET
CP-NSCJ
9 male hex bits
Length 80mm : 5-6-7-8-9-10-12-14-17-19
TO USE WITH A RATCHET OR
COMPACT WRENCH WITH
A LIMITED TORQUE
1/2 SCREWDRIVER
SOCKETS TORX SET
CP-STJ
32 male Torx bits
- length 50 mm : T20-25-27-30-40-45-50-55-60-70
-lenght 100 mm : T20-25-27-30-40-45-50-55-60-70
- lenght 150 mm : T40-45-50-55-60-70
- lenght 200 mm : T40-45-50-55-60-70
43
1 000V / HYBRID
SPACE
4 PLIERS
1000 V SET
201-J4TIZ
Multigrip pliers, straight nose pliers, cutting
pliers,combination pliers.
1000V INSULATED
BIMATERIAL PLIERS
SET
ZTB-PJ7Z
1 cutting plier - 1 cable sheath strippers
1 multigrip pliers - 3 slotted screwdrivers
1 Pozidrive screwdriver
Complies with NF ISO 5749
and IEC 60900 standards
MULTIMETER
FL-2010
Electric protection .................................................................................................................. EN 610101
Insulation ........................................................................................................... Class 2 double insulation
Overvoltage category.............................................................................................................. Cat II 100 V
V / AC ............................................................................................................................................... 700 V
V / DC............................................................................................................................................. 1000 V
mA DC/AC.................................................................................................................................... 400 mA
A DC/AC ............................................................................................................................................. 20 A
Frequency, resistance, capacity, diode test, continuity .......................................................... 250 V DC/AC
600 A CURRENT
CLAMP
FL-13
AC/DC current and voltage until 600 A / V
Resistance, temperature.
Diode test.
Spark plug and alternator control
Resolution : 1A or 100mA, 1mV
or 0,1mV, 0,1 Ohm, 0,1pF, 1°C or 1°F
INSULATION TESTER
913-CI
Easy to use and robust. Ensures the proper functioning
of equipment and facilities. Informs the leakage current
that can flow from one conductor to another.
Suitable for low-voltage systems (<1000V).
Audible and visual indication when the test
is in progress. Operating instructions
in 10 languages. 0hmmeter, voltmeter and
continuity test function. Large LCD display
22 mm, 2000 points.
Resistance test 0 -200 ohms at 500V DC
. 0 -200 ohms at 250V DC.
Voltage measuring 700V AC / 000V DC 1
Test time 1 min / 2 min / 4 min or manual
”low battery” indication
Quality RoHS, IEC6010 Cat.III standard
1000V and Cat. III
1000V INSULATED
MULTIMETER
FL-17
To test hybrid vehicles and usefull for others automotive
applications intensity increased to 20Amp induction
clamp (rpm: 2 to 10 cylinders) widescreen backlit LCD
with automatic stop. 14 functions including DCV, ACV,
DCA, ACA, resistance, RPM (Tach), Frequency, Dwell,
temperature (IR) (º C / º F). Automatic shut-off, overflow
indicator measuring.
Protection against overvoltage
measure the pulse width in milliseconds, to test the
injector opening time,
control electronic transmissions ...
MULTIMETER 1000V
FL-11
Especially designed for automotive applications
- DC voltage from 3,2V to 1000V, AC voltage from 3,2V to 750V
- DC Current from 32mA to 10A, AC from 32mA to 300mA
- Resistance from 320 to 32M Ohms
- Frequency from 0,01 to 32 kHz
- Diode controller
- Tachometer from 0 to 12 000 rpm
- Thermometer from -20°C to +1370°C or from 0°F
to 2000°F shock-proof,
Accessories included : cable probe,
temperature probes, induction clamp.
44
NO VOLTAGE
TESTER
913-VATB
Tension test,
Continuity test visual and sound.
Phase rotation indicator
”Without third hand ”
Single pole test for phase detection.
Indication of polarity.
Flashlight.
IP64 - Protection against water splashes and dust.
Works in tension test even in the absence or failure of the batteries.
Protection of test probes with rubber tip.
Function flashlight for measurements in dark places .
1000V INSULATED
TORQUE WRENCH 3/8 ”
Z-854-J
1000 V INSULATED TOOLS CASE
Type II, Class A.
Triggering and reset automatically.
Accuracy compliant to the standard: + / - 4%.
Linear scaling.
Setting the torque and by vernier and
protected by a disengagable thumbwhell providing locking
of release torque
CP-11Z
8 insulated 1000V tools set, gloves and overgloves , 1 zero-voltage tester , 1 insulated bag,
3 offset ring wrenches, 2 screwdrers, 1 cutting pliers
8 INSULATED
TOOLS 1000V
WITH SOCKETS AND
ACCESSORIES 3/8” SET
ZJH-J8PCE
Bi- material box
detail:
- Sockets ZJH: 10 11 12 13 mm,
- Ratchet ZJ-159,
- Extension ZJ-210,
- wrench Z10-10,
- Pliers 239-20.
INSULATING MAT
Z-420
To isolate the operator from conducting elements (floors, walls).
Molded rubber 3 mm.
Dimensions: 1000 x 600 mm
LATEX
INSULATING
GLOVES
1000 V
INSULATED
TOOLS SET
Z-421-A3
Z-421-A4
ZJH-33PZ
For live-line electrical work: maximum 500 V
Size 9 - size 10
5 isolated pliers set, 1 adjustable wrench,
5 electricians screwdriver, 2 Phillips screwdrivers,
1 Pozidriv screwdriver, open-end wrenches from 8
to 19mm, 1 box of 8 1000V insulated tools,
1 no voltage tester,1 trolley .
GAUNTLET
Z-421-A9
Z-421-A10
Protects against mechanical risks.
For use over insulated gloves latex of the same size.
Size 9 - size 10
45
Lighting
space
30 LEDS INSPECTION
LAMP
BAL-19
IP 65
Brightness more than 1500 Lux
Temperature <30 ° C
Charging time : 2,5 h for 6 hours operation.
Hanging hook
Shock and corrosion resisitant
11W
FLUORESCENT
RECHARGEABLE
LAMP
BAL-21
Lamp Type: Fluorescent 11 W - 900 lumens
Battery: Polymer Li-ion 14.8V - 1500 mAh,
Charging time : 1,5 h for 2,5 hours operation.
IP65
Charger: 100-240 V / 50-60Hz / 35Va
Charger Protection: IP 20
Lamp length 495mm
Diameter 60 mm
LED
INSPECTION
LAMP
36 W HOOD LAMP
BAL-16
IP54 double insulated - 36W neon tube
230V - 5m cable
Telescopic adjustable arm
between 1.1 m and 1.6 m
Suitable for all vehicles
LED HOOD LAMP
BAL-16B
High power hood lamp
hangs from 1.20 m to 1.70 m
Battery 4.4 Ah, 3.7 V Li-ion
brightness 1600 lux at 0.5 m
Charging time : 6h
working time 4h
IP 54
46
BAL-25
7 LEDs + 1 on the top
Requires 3 AAA batteries included
Provides a wide and direct light.
Pocket clip + magnet on the back to work with
free hands.
Ultra-compact light source
Length: 15.5 cm
Also avaible by 10 pces in display : bal 25-J10
MAGNETIC
SUPPORT FOR
INSPECTION LAMPS
STIP LED
INSPECTION
LAMP
BAL-SUP
Ideal for fixing your inspetion lamp on a
stationary support.
High-power magnet
2 Velcro ® for fixing your inspection lamp
BAL-29
New technology ” Strip LED” allows
more powerful lighting than LED
technology.
IP65 protection
IK 07
Swivel hook.
3 hours battery autonomy
Charging time 2.5 h
LED HEAD LAMP
BAL-20
6 White LEDs.
3 intensity adjustements.
Rotates 180 degrees.
ABS Plastic.
Water and shock resistant .
Supplied without battery
AIR HOSE REEL
9 + 1 M (15 BARS)
INSPECTION LAMP
WITH 10 M CABLE
2P10A 230V SOCKET
ENR-A8
Cable length unrollest : 9 m + 1 m
Hose inside diameter 8 mm
Hose material: Polyurethane
Maximum pressure 15 bars.
Connection: 1/4” M.
BAL-22
Lamp length : 550 mm.Lamp diameter : 60 mm.Cable length : 10m.
Cable diameter : 2x1mm². Cable type : H05 RN-F HAR
Lamp protection : IP55. Supply power: 230V
Lamp power : 11W Puissance de la lampe : 11 W.
AIR HOSE REEL
15 + 1 M (15BARS)
ENR-A10
Cable length unrollest :15 m + 1 m
Hose inside diameter 10 mm
Hose material: Polyurethane
Maximum pressure 15 bars.
Connection: 3/8” M.
INSPECTION LAMP WITH
10 M CABLE CEE 24V SOCKET
BAL-24
Lamp length : 550 mm. Lamp diameter : 60 mm
Cable length : 10m. Cable diameter : 2x1mm²
Cable type : H05 RN-F HAR.Lamp protection : IP55
Supply power : 24V .lamp power : 11W
47
HYDRAULIC
SPACE
50 T
HP-50-A
HYDRAULIC PRESS
Welded frame.
Adjustable work table.
Manual pump. Pressure
gauge with damper.
Delivered with two
straightening V and base
for floor fixing. Quick and
smooth approach.
15T
30T
HP-15A
HP-30-A
50T
HP-50-AN
30 T
HP-30-AN
ACCESSORIES FOR
HYDRAULIC PRESS
HP-15A
HP-30-A/
HP-30-AN
HP-50-A/
HP-50-AN
15T
30T
50T
A
600
880
880
B
650
650
650
C
1765
1890
1920
D
120
145
145
E
500
710
710
G1 min
150
150
155
G2 maxi
660
700
720
R1 hydraulic
150
120
120
Ref.
Capacity
HP-ADD
HP-ADE
hydraulic press 30 and 50 T set.
diam : 30,25,22,20,18,16,12 mm.
hydraulic press 15T set :
diam : 30, 25, 22, 20, 18, 16, 12 mm.
Data mm
R2 extension
75
75
75
R
225
195
195
250
250
195
229
lateral stroke
Weight
81
500 KG FOLDING
CRANE
CG-5A
1T CRANE
CG-10A
2 T FOLDING
CRANE
CG-20A
500 KG
BENDING CRANE
Ref.
CG-5-PA
Designation
length mm
Hydraulic safety in case of
overload. Dead man control type.
Proportional descent control
Non-oxidizing and silent
polyamide wheels.
Allows the passage
of a Euro pallet.
48
CG-5A
CG-10A
CG-20A
0,5T
1T
2T
0,5T
1280 mm
1500 mm
1870 mm
1540 mm
Crane
CG-5-PA
Bending crane
width en mm
900 mm
1020 mm
820 mm
885 mm
height of hook max
2400 mm
2750 mm
2470 mm
2070 mm
height of hook mini
330 mm
520 mm
620 mm
620 mm
Levage 1
500 kg
1000 kg
2000 kg
500 kg
Levage 2
400 kg
800 kg
1750 kg
400 kg
Levage 3
250 kg
500 kg
1650 kg
350 kg
Levage 4
150 kg
300 kg
250 kg
ROLLING JACK
1,5 T
2T
2T
CR-15-B
CR-20-B
CR-20-BP
JACKET
3T
6T
10 T
CR-30-B
CR-60-B
CR-100-B
2 TONS
ROLLLING JACK
CR-20BC
Minimum height: 48 mm
Maximum height: 520 mm
12 T
20 T
CR-120-B
CR-200-B
- Wide range
- Ergonomic handle
Réf.
CR-15-B
CR-20-B
CR-20-BC
CR-20-BP
CR-30-B
CR-60-B
CR-100-B
CR-120-B
CR-200-B
capacity
1,5T
2T
2T
2T
3T
6T
10T
12T
20T
A
110
75
48
48
140
170
170
190
200
B
665
390
395
455
385
410
435
390
415
C
165
135
135
135
185
220
270
270
310
D
775
465
470
520
525
580
605
580
615
E
1250
880
940
920
1150
1310
1600
1550
1777
F
2180
1810
1920
1850
2080
2215
2530
2480
2707
G
360
360
360
360
360
414
414
414
415
H
360
260
260
260
260
336
386
386
302
weight (kgs)
60,5
32
43
46
81
123
120,5
234,5
49
HYDRAULIC SPACE
HYDROPNEUMATIC JACK
Réf.
BOTTLE JACK
Safety valve and hydaulic stroke restricter
15-30T
20-35-65T
2T
3T
3T
CRH-30
CRH-65
HCB-2
HCB-3
HCB-3B
CRH-30
CRH-65
15-30T
20-35-65T
A
518
1055
B
300
235
C
400
515
D
154
210
E
253
327
weight (kgs)
31
74,5
5T
8T
10T
HCB-5
HCB-8
HCB-10
12T
20T
30T
HCB-12
HCB-20
HCB-30
- Integrated extension
- Intervention control in case of air supply failure
- The handle can locked in 4 different positions
(45°, vertical, horizontal or folded)
- Dead man system with safety valve
PIT JACK
”Dead man” safety
Ascent and descent pedal to work frree hands. Hydraulic limiter.
300KG
600KG
1200KG
HF-2-A
HF-6-A
HF-12A
Height mini : 1 120mm
Height maxi : 1 920mm
Stroke : 800mm
Height mini : 1 120mm
Height maxi : 1 920mm
Stroke : 800mm
Capacity : 1 200kg
Height mini : 900cm,
Height maxi : 1 900cm
Réf.
HCB-2
HCB-3
HCB-3B
2
3
3
5
A
160
168
210
212
B
100
105
150
150
C
50
65
65
75
D
310
338
425
437
Weight (kgs)
3,6
3,9
4,2
5
Capacity
Réf.
Capacity
50
HCB-8
HCB-10
HCB-12
HCB-20
HCB-5
HCB-30
8
10
12
20
30
A
219
219
226
234
242
B
150
150
150
150
150
C
75
75
75
75
75
D
444
444
451
459
467
Weight (kgs)
5,9
6,5
8
12,1
15,5
BEARING
SPACE
BALL JOINT SEPARATOR
BEARINGS PULLER KIT
76-EXR
16 MM / 20MM
To use directly on the shaft or with the
press through
diameters adapters.
· 9 bearings adapter from 55.5 to 84mm
· 3 cages 76, 86 and 91mm.
· One 38mm screw extraction with
a centering pin, a nut, 3 rings and an
oil can.
733-VL-0
LV
733-VL-1
l = 20mm and H = 65mm.
HGV
EXTRACTOR FOR
SPHERICAL JOINTS
733-PL-2
l = 32mm and H = 85mm.
733-VL-6
733-VL-7
diam : 16-18 mm
height : 40mm
width : 40mm
pattern : 19mm
diam : 20-22 mm
height : 40mm
width : 40mm
pattern : 19mm
LCV HYDRAULIC
BALL JOINT SEPARATOR
733-PL-3
For separating HGV ball-joint.
Jaw opening capacity : 70mm, Jaw width 36mm, SCM 440 material.
Hydraulic power : 12 tones
ENGINE AND GEARBOX
SUPPORT CROSSBAR
HM-20B
Ideal for working on the engine when the supports must be removed.
Changing belts, clutch. The engine / gearbox crossbar has been developed for use on passenger cars and commercial
vehicle. It is designed to support engine and gearbox, despite the dismantling of mechanical parts within the repair
work. The crossbar is directly attached to the vehicle floor.
Length: 1030 mm
Width: 940 mm (between front and rear support)
Max. : 400 mm
Maximum stroke of the support plate: 190 mm
Longueur : 1030 mm - Largeur de travail : 940 mm (entre support avant et arrière)
Largeur max. : 400 mm - Course maxi de la plaque support : 190 mm
51
OLIVER,
AUTOMOT
IVE MECH
ANIC
”Ergonom
ics and po
w
allow me
to save ti er of SAM tools
me during
my interv
entions”
AIR TOOLS
SPACE
3/8” IMPACT WRENCH
1/4 RATCHET
PN-202-D
Length 140mm
Width 55mm
Speed: 10 000rpm.
Torque 150 Nm.
Air inlet 1/4”
Working Pressure 6,3 Bars
Air Consumption 140l/min
PN-206-S
Overall length 128mm
Speed 350 rpm.
Torque 27Nm
Air connection 1/4”
Working Pressure 8 Bars
Air consumption : 64L/min
1/2 IMPACT WRENCH
PN-238
-Loosening capacity : 999 Nm
- Tightening torque : 881 Nm
- No-load speed : 7000 trs/min
- Weight : 2 kg
- Consumption of air : 310 L/min
- Double strike
- 3 positions torque regulator
1/2” RATCHET
PN-208
Speed 160rpm.
Torque = 67Nm. Connexion 1/4”
1” IMPACT WRENCH
PN-237
Speed : 4 200 rpm. Torque regulator. Long spindle
Rotating handle. Connexion 3/8”
Double strike hammer
3/4” IMPACT
WRENCHES
SET
PN-204K
10 MM SELF-TIGHTENING
CHUCK DRILL
Speed 6 500 rpm
Torque 900 Nm
Torque regulator
Detail : 9 sockets : 19-21-22-23-2427-29-30-32
Accessories : Extension, key, male
threaded fitting, oil can, lubricator.
PN-210-MA
No-load speed : 2 200 rpm
Air consumption : 210 l/min
Inlet : 1/4”
Keyless chuck
MAGNETIC
TOOL HOLDER
RC-200
Magnetic support for impact wrench,
sockets, wheel screws, torque wrench …
52
PN-239
Double strike 1/2” impact wrench
Loosening capacity : 850Nm
Tightening capacity : 750Nm
Compact for user’s confort
Length 170mm
Width 65mm
Speed selection on trigger
For right and left handed
3 speeds to screw or unscrew
POWER AND
PERFORMANCE WITH
LITHIUM-ION’S
BATTERY
TECHNOLOGY
3/4 IMPACT WRENCHES
AND SOCKETS SET
PN-203-K
Speed : 7 000rpm. Torque 450Nm
Torque regulator.
Detail : 10 sockets of 9-10-11-13-14-17-19-22-24-27
Accessories : extension, key, male threaded fitting,
oil can, lubricator.
18 V BATTERY-POWERED
P-182-K
CV JOINT EXPANDER
2 Battery 18.0V . Speed : 0000-2000 RPM
Power: 4 100kg-cm (410 Nm)
Charging time : 1h
Interchangeable carbon brushes
PN-732A
No need to remove the driveshaft.
The expander move the universal CV boot.
Capacity from 20 to 115mm
Inlet : 1/4”
Suitable for LV and 4X4
Easier, faster, cleaner.
13 MM
BATTERYPOWERED DRILL
P-184-K
2 Batteries 18.0V
Speed 0-380 RPM / max 0-1380 RPM
Power: 520kg / cm
Impact /mn: 4560 min / 16560 max
WHELL SET
CPA-4Z
Includes : 1 impact wrench 1 / 2’’,
1 DYNATECH torque wrench 20-200Nm,
3 impact socket set and a magnetic tool
holder.
3 IMPACT
SOCKETS 1/2
FOR LV WHEEL
NUTS
76L-J3
Sockets 17, 19 and 21mm.
53
PROFESSIONAL
+ 33 4 77
92 25
WEBSITE
:SAM
www.sam.eu
SAM ASSISTANCEADVICE
/ SAM CONSEIL
: (33)
04 11
77 92 25
84
EN LIGNE : WWW.SAM.EU
CHARGER
SPACE
INTELLIGENT BATTERY CHARGER
CHB-12-4
CHB-12-8
CHB-24-15
REFRACTOMETER
913-22B
Backlight system for easy reading even in low light
Allows to check:
1. Liquid cooling: 0 to -50 ° C.
2. battery fluid density: 1.1 to 1.4 kg / L.
3. Windshield washer fluid: 0 to -40 ° C.
4. AdBlue ® separate scale from 30 to 35%
Statistically the battery problems are the leading cause of vehicle breakdown
An integrated charge tester allows to decide if it is necessary or not to charge the battery
A microprocessor ensures an optimum charge and allows to use a single charger for all batteries type
This tool allows to charge directly on the vehicle
The ”boost” system allows to boost a completely discharged battery
SAM chargers are compliant with DIN 40839 standard
Ref.
Designation
STANDALONE
BACKUP BOX
Recommended for
BSM-A
Max Output Power
Prevents the loss of electronic data of the vehicle (car radio,
alarm, time, various data ).when changing or disconnecting
the battery.
- Direct connection to the plug connector OBD2
- Dry internal battery 12V / 4.5 A.
- Switch
- A LED indicates a good connection of the device
- Protected by a 4A fuse
- With intelligent charger 220V or 120V.
IP
Alternative traditional charge
54
Nominal battery voltage
Battery capacity
CHB-12-4
CHB-12-8
12V-80Ah
12V-160Ah
CHB-24-15
12V/24V-600Ah
scooter, Light vehicle, motorcycle
light commercial vehicle, HGV 12V, public works,
HGV 12V,public works , agricultural
12V
12V
12V - 24V
3Ah à 80Ah
20Ah à 160Ah
90Ah à 600 Ah
60W
120W
450W
65
65
65
10A
16A
50A
CHARGERSTARTER
12 / 24V
BATTERY TESTER
6-12-24V WITH
PRINTER
CHB-3
913-30
Maximum starting intensity :
610A
Power : 230V
Protection against power surges
and polarity reversions
Load current : 50A
Installation power : 4.5kW
Check compatibility with
electronic cards in the vehicle
handbook.
6-12V battery tester, charging system tester for 12 and 24V
This tester can simply and accurately diagnose the
condition of your battery
giving you all the data on a receipt.
Working scale from 40 to 2000 CCA
Runs on system-ENC1 SAE-DIN-IEC-ENc2
BST-12A
BST-12B
BST-12-24A
BST-24A
12V/1150A
12V/1450A
12V/2300A
24V/1450A
24V/1150A
START ALL VEHICULES
SAFELY
COMPONENTS :
Clamps - cable - fuse 100% copper for a perfect power release .
ELECTRONIC SECURITY:
1st protection: Anti reverse polarity system with buzzer to avoid
damage to the vehicle computer.
2nd protection: Signal works even when the SAM BOOSTER is off.
RESISTANCE :
ABS housing to withstand to the daily shocks in the workshop.
Fuse surrounded by ceramic and placed in an accessible
compartment to avoid any booster opening
COMPLEMENTARY FUNCTION :
Maintains the electronic data of the vehicule when removing the
battery. Allows to power any 12 V device.
TECHNICAL SPECIFICATIONS
Battery voltage
Starting amperage
Amps peak
Cable length (without clip)
Fuse accessibility
Cable section
Clip material
Automatic Charger AC / DC
Polarity inversion signal
Battery weight
Fuse on the battery (internal)
BST-12A
BST-12B
BST-12-24A
BST-24A
12V
12V
12/24V
24V
1150 A
1450 A
2300 A / 12V 1150
A / 24V
1150 A / 24V
3500 A
3700 A
7000 A / 12V 3500
A / 24V
3500 A / 24V
140 cm
140 cm
180 cm
180 cm
yes
yes
yes
yes
25 mm2
50 mm2
50 mm2
50 mm2
Cuivre
Cuivre
Cuivre
Cuivre
12V 1,5A
12V, 4A
12V, 4A
24V, 2A
yes
yes
yes
yes
11,5 Kg.
14,9 Kg.
21 Kg.
20,6 Kg.
500 A
500 A
2 x 500 A
2 x 500 A
55
LS
ENGINE TIMING TOO
PSA
RENAULT
VAG
99-PSA
99-REN
99-VAG
DIESEL ENGINES: 1.4 HDi, 1.6HDi, 2.0HDi, 2.2HDi, 1.9D DW8, 1.5D
TUD5, 1.8D/1.9D XUD7, 1.9D XUD9, 2.1D XUD11.
ESSENCE ENGINES: 1.4 et 1.4 16v + TU3A, 1.8 16v EW7, 2.0 16v
EW10, 2.0 16v Hpi, 2.2 16v. EW12, 1.0 TU9, 1.4 TU3, 1.6 TU5, 1.6 16v
TU5, 1.8 XU7, 1.8 16v XU7, 2.0 XU10, 2.0T XU10, 2.0 16v XU10.
Citroën : C15, C1, C2, C3/Pluriel, C4, C4 Picasso, C5 I/II/III, C6, C8,
Xantia, Xsara, Xsara Picasso, Evasion/Synergie, Berlingo, Dispatch/
Jumpy, Relay/Jumper I/II, Saxo, ZX, XM, Evasion/Synergie, AX.
Peugeot : 107, 1007, 206/CC, 207, 306, 307/CC, 308, 406, 406 Coupe,
407/Coupe, 607, 806, 807, Partner, Expert I/II/III, Boxer I/II, 206, 106,
605, 205, 206/CC, 405.
DIESEL ENGINES: 1.5dCi K9K, 1.9dCi F9Q, 2.2dCi G9T,
2.5dCi G9U. 1.6D F8M, 1.9D F8Q, 1.9D Turbo F8Q, 1.9dTi
F9Q, 2.1D Turbo J8S, 2.2D/Turbo G8T.
ESSENCE ENGINES: 1.4 16v. K4J, 1.6 16v. K4M, 1.8 16v.
F4P, 2.0 16v. F4R, 1.2 D7F / E7F, 1.2 16v D4F, 1.4 E7J, 1.8
F3P, 1.8 16v F7P, 2.0 F3R / J7R, 2.0 16v F7R, 2.2 J7T.
Renault : Clio, ClioII/Campus, Clio II, Clio III, Modus, Logan,
Megane, Megane II, Scenic/RX4, Scenic/Grand Scenic II,
Laguna, Laguna II, Espace/Grand Espace, Kangoo, Trafi c
II, Megane Scenic, R19, Safrane, R5/Van, Extra/Rapid/
Express, Trafi c, Twingo, Master II.
DIESEL ENGINES: 1.2 TDi, 1.4 TDi, 1.9 TDi, 2.0 TDi,
1.7SDi,1.9D / 1.9D Turbo, 1.9SDi, 1.9TDi.
ESSENCE ENGINES: 1.2 6v, 1.2 12V, 1.4FSi, 1.6FSi, 1.4 16v,
1.4FSi 16v, 1.6 16v, 1.6FSi 16v, 1.6, 1.8, 1.8 Turbo, 1.8 16V,
2.0 /2.0 20v, 2.0FSi, 1.8 Turbo & 2.0 20v.
Audi : A2, A3, A4, A6, 80, S3, TT.
Seat : Arosa, Ibiza/Cordoba, Altea/XL, Leon, Toledo,
Alhambra, Inca. Skoda : Felicia, Fabia / II, Roomster, Octavia
/ II, Superb. Volkswagen : Lupo, Polo/Classic, Fox, Eos, Golf/
Bora, Golf Plus, Jetta, Beetle, Passat, Touran, Sharan, Caddy,
Transporter, Vento, Polo, Lupo, Golf.
UNIVERSAL KIT
TO ASSEMBLY
AND
DISASSEMBLY
ELASTIC BELTS
99-TCEU
Universal tool able to put off all elastic belts on
any engine in an non-aggressive and secure way
ELECTRONIC
BELT TENSION
METER
SAC CLUTH
ALIGNER
99-TCE
• Suitable for most of Self Adjusting
Clutches SAC (3 and 4 holes) equipped on vehicles of FIAT
GROUP, VW-AUDI, BMW, MERCEDES, VOLVO, OPEL, RENAULT etc.
Compatible with all types of belts
(timing, accessories)
The control of the belt tension
is done in Hertz (30-520 Hz).
These data are recommended
by the car manufacturers.
EX-SAC
• Allows operations on clutch equipped with this device in order
to prevent any damage to system and to keep adapter ring
in right position.
• Advantages
Pre-tightening of disk pushing plate during assembly and
disassembly avoiding clutch deformation.
Alignment of clutch disk to drive bearing or to disk pushing plate.
56
DRAIN SPACE
14 CAP
WRENCHES
SET
LV SELFHGV SELFADJUSTABLE
GRIPPING OILGRIPPING OILOIL-FILTER
FILTER WRENCH FILTER WRENCH WRENCHES
LV AND HGV
628-3
628-6
628-JCC
14 pieces set:
diameter 66.5 mm / 14 point
diameter 87 mm / 18 point
Self-tightening
Square drive 3/8”
Opening from 62 to 96mm
Self-tightening
Square drive 1/2”
Opening from 90 to 170mm
628-J2
Delivered with a free HGV strap
Capacity from 65 to 155mm
Capacité de 65 à 155 mm.
6 OIL FILTER
CAP WRENCH
SET
CAP
WRENCHES
SET
CPA-VID
Oil filter socket set :
- 24 mm : GM
- 27 mm : PSA, GM, Renault, Ford,
BMW, Fiat, Nissan
- 30 mm : Korean cars
- 32 mm : VAG, GM, BMW,
- 36 mm : VAG
- 38 mm : BMW, Volvo, Opel
CPA-FIL
Ideal for Renault, PSA, VAG, Fiat,
Opel, Mercedes, Lancia, Alfa
Romeo, Honda, Mitsubishi…
30 caps.
OIL FILTER CAP
WRENCH
628-SET
Oil filter socket set :
- 24 mm : GM
- 27 mm : PSA, GM, Renault, Ford, BMW, Fiat, Nissan
- 30 mm : Korean cars
- 32 mm : VAG, GM, BMW,
- 36 mm : VAG
- 38 mm : BMW, Volvo, Opel
ADDITIONAL
GAUGE FOR PPD-3
PPD-4
Allows turbo diesel pressure control
From -1 to +3 bars bars
VACUUM / PRESSURE PUMP
PPD-3
This pump allows to opearate all vacuum.
Pressure maxi 4 bars. Depression maxi -1 bars
Delivered with 12 bits and 5 flexibles
Application examples : Capsule check. EGR valve control. Valve rating
Pressure regulator check. Brake circuit vacuum. Injection pump valve control
57
BRAKES SPACE
LIQUID BRAKE TESTER
FET-4C
Test without burning the liquid.
Heat in less than 15 seconds
The alternative standards are indicated on the box.
Powered by 12V battery connection
ELECTRONIC BRAKE
BLEEDER
FET-10
Ideal to achieve a complete brake bleeding within 15 min.
Only one operator is required to perform this operation.
Filling and automatic shutdown
Reduced size for optimal storage space
Pressure from 0 to 4 Bars
Delivered with one 1 liter recovery can
DISC BRAKE PISTON
WINDING-BACK SET
FD1-C
Suitable to push-back and wind-back brake pistons.
Multibrand.
PNEUMATIC DISC
BRAKE PISTON
PUSHING TOOL
FRONT WHEEL
DISC BRAKE PISTON
WINDING-BACK
FD1-PN
FD1-U
To rewind pistons of brake callipers
without effort and safer
1/4” air inlet
3/8” square drive
Universal adapter : Suitable fort single,
twin or quadruple pistons.
Prevent damage to pistons, seals or calipers
(no pliers, no screwdriver)
Powerfull : generates 215kg thrust
all pistons are pushed togethetno piston getting out
WWW.SAM.EU
UNIVERSAL
CAP FOR
FET-10
BRAKE
BLEEDER
FET-10K
58
PNEUMATIC BRAKE
BLEEDER
FET-6
Allows to fill the circuit while making the drain.
Suitable for ABS system. No air pockets through the depression
5,5 bar mini air pressure and maxi 9 bars
Depression from -0.8 Bars to 7 Bars
1,5 liters container with anti overflow valve.
HYDRAULIC BRAKE
FITTINGS WRENCHES
FHT-J4
Unblocks seized up or rounded nuts.
Ideal for brake line unions to replace flare nut wrenches.
Dimensions: 10-11-12/13-14
2012 novelty
SAM spring
compressor
Replace your shocks absorbers
quickly and safely
735
The safety cage will work quickly and safely.
The suspension is trapped in his cage.
The cage is equipped with a system to prevent compression of
the suspension if the cage is open.The working height complies
with a reassuring position for the back, you can work safely, back
straight.
The pneumatic pedal allows work on two hands free.
Each model is equipped with a serial number for a better
monitoring of the product.
TERMS OF USE:
Air pressure: from 6 to 10 bars
Compression capacity ”: 1.3 tons to 10 bars.
Dimension ”: 650 x 400 x 1400
Product supplied with two compression plates
Plate 1 :diameter: 78 to 130 mm
Plate 2: diameter: 125 to 205 mm
Machine complying with CE 2006/42/EC and 97/23/EC
- PED standard
SHOCK ABSORBERS STRUT
TOOLS SET
CPA-20Z
Perfect to assembly and desassembly all Mac Pherson suspensions.
For Renault, VAG, PSA, Fiat, Nissan, Ford, BMW, Mercedes
59
WHEELS SPACE
TULIP FOR
STEERING
BALL JOINT
732-DA1
3 BALL JOINT
WRENCHES 3/8
SET
To use with a 30 wrench
Diameter from 35 to 45 mm
732-D-3
HUB PULLER KIT
Seat 13 mm
Audi : 14 mm
Opel : 17 mm
EX-370
HUB PULLER LATE
EX-370-A
SOCKETS 1/2” AND 3/8” FOR
ROUNDED NUTS AND PINS SET
Diam : 148,5. Height : 90mm
Positioning the dowels
from 3 to 5 positions.
74NJ-J10
Sockets 1/2 et 3/8 : 6 - 8 - 10 - 11 - 12 - 13 - 14 - 15 - 17 - 19 - 21 - 24 - 27.
Detail : Sockets of 16-8-10-11-12-13-14-15-17-19-21-24-27 mm and drive out nut
Conical and helicoid shape to grip. Hardness = 50-55 RC
SLIDE HAMMER
EX-370-B
Weight = 2,8kg
HYDRAULIC
SCREW
EX-370-C
12 T capacity
8 SOCKETS
1/2 FOR LOCK
NUTS SET
76NSJ8
Allows to reuse lock nuts when user
has no longer the specific key.
Details: 17, 18.5, 20, 21.5, 23, 24.5,
26, 27.5mm
Don’t use with impact wrench
60
INTELLIGENT VALVES
FORCER
913-VAL
Allows to force the valve for Citroen, FIAT, Lancia, Peugeot, Renault.
Suitable for valves SCHRADER®, SIEMENS® and 1st generation
TRW® valves.
Powered by a 9V battery. Resistant housing to main solvents
MULTI-SERVICE
SPACE
CAST IN ONE PIECE
EXHAUST COLLAR PLIER
LAMBDA
SENSOR 1/2
SOCKETS :
7 TOOLS SET
208-75
To open and maintain PSA collars without danger
To prevent damage and re-use the same collar.
Length 300mm. 70mm opening
CPA-6Z
Four 22 mm sockets with different opening
27mm, 29mm and 1/6”
FUEL-LINE PLIER
208-44
Fuel line seperator
Suitable for petrol and diesel engines.
pliers length = 175mm
SPRING CLAMP
FITTING
AND REMOVAL
TOOL
208-19
Fits self-tightening spring clamps between
18 and 54 mm
Ractchet system for reduced effort
Easier and fast positioning
FLANGE CLAMP PLIERS
”CLIC”
208-40
To assembly and disassembly the ”Clic”, ”Clic R”, ”Clic GR” and ”Clic E” clips
INSPECTION CREEPER
931
SELF-TIGHTENING
CLAMP PLIERS
Steel frame with durable PVC coating.
6 rotating wheels. Adjustable head cushion
Dimensions = 945 x 430 x 85 mm.
Resistant to 120 kg
208-17
For flanges from 18 to 54mm
Flexible sheath 630mm
1000 °C
INFRARED
THERMOMETER
FL-3
Dual laser sighting
From -50 °C to 1000°C
Adjustable emissivity from from 0,1
to 1,0 Automatic storage of data
+ /- 1 % accuracy
12/24V SURGE
LIMITER
913-1224
This device is used to protect the electronics
of the vehicle against surges.
Connect the clamps to the battery poles.
The LED indicates the working voltage (12/24 V).
The buzzer indicate the presence of voltage.
Maximum voltage 33V
Maximum charge 500W
Reaction time: Immediate
61
TEXTILE SPACE
HOOD
SWEATSHIRT
SWC-L
SWC-XL
100 % cotton
WORK VEST
PARKA08-L
PARKA08-XL
GT-L
GT-XL
GT-XXL
65% Polyester and 35% Cotton
4 pockets
Elastic Girdles
Available sizes : L-XL-XXL
CAR FENDER PROTECTION
No magnetic. The cover is made with a new no-slipping material which
enables to a side of the cover to adhere perfectly to any clean
and smooth surface. Washable. Waterproof. Not easily flammable.
Oil-resistant and to the majority of the products
used in the automotive industry.
PTC-L
Dimension 90 x 50 cm.
PTC-XL
Dimension 120 x 50 cm.
62
PARKA 4 IN 1
4 functions : wind-cutter + polar
+ bodywarmer + parka
100 % Polyester. Available sizes L-XL.
SHIRT
CMLN-L
CMLN-XL
CMLN-XXL
MECHANICS
OVERALLS
100% cotton.
CDTA-L
CDTA-XL
CDTA-XXL
This mechanics overall the
ideal equipment as overgarment. Detachable sleeves.
Multipockets. It integrates all
protections and reinforcements
needed for heavy mechanical
work.
WORKTROUSERS
PANT-L
PANT-XL
PANT-XXL
65% Polyester and 35% Cotton
5 pockets
Possibility to disassemble the legs
Available sizes : L-XL-XXL
POLOSHIRT
PMCS-L
PMCS-XL
100% cotton.
POLOSHIRT
PMCN-L
PMCN-XL
PMCN-XXL
100% cotton.
63
New catalog SF4
SAM INTERNATIONAL
60, boulevard Thiers – BP 10528
42 007 Saint-Etienne Cedex 1
France
Phone : +33 4 77 92 13 56
Fax : +33 4 77 92 13 49
e-mail : [email protected]
RCS SAINT-ETIENNE N° 338 002 231
Code T.V.A FR 36 338 002 231
Offer valid until 31/12/2012 in territories part of the European Union, within the limit of stocks available. User prices net taxes excluded recommended.
Rollersam®, Samsodrive®, Samsocut®, Samsoflex®, Samsoforce®, Servisam®, Dynaprod®, Dynaflash®, Dynasam®, Dynatech®
are registered trademarks belonging to SAM. Phillips®, Pozidriv®, Torx®, Resistorx®, Araldite®, Clic®
are registered trademarks belonging to companies other than SAM. Non contractual photos and texts.
Crédits photos : Fotolia.
Avaible

SAM TOOLS - Promo action 2012

Transcription

Similar documents

France`s Social Security agency trains its

SAT., JUNE 20, 2015 • 10 AM - Wilson Real Estate and Auction

Corporate Social Responsibility 2

Made in Taiwan - China International Hardware Show

S30A-the cooles power

NEW - SAM Outillage

Join or renew as a Sam`s Club member and receive up to a

Compact Shop Lights Locking Socket Extensions Hnuchle

The Lookout Tower