FUEL - General Equipments

e
d
i
s
n
i
s
’
t
a
h
w
uel Pumps / 92
F
ry
ta
o
R
l
ia
tr
s
Indu
Pump 3:1 / 94
Rotary Booster
sfer Pump / 95
n
ra
T
l
e
u
F
m
g
Double Diaphra
el Pumps / 96
u
F
ic
tr
c
le
E
ty
Heavy Du
Fuel Filter / 98
ozzles / 99
Fuel Control N
00
Fuel Meter / 1
85 Pump / 102
E
&
l
e
s
ie
D
io
Lever Action B
FUEL
3 equipment
87
fuel pumps & accessories
Industrial Rotary Fuel Pumps
ESP Bomba Rotativa - Industrial
FR Pompe de Baril Rotative industrielle
DE Kurbelpumpe
RBP-3V
Product Features
Ÿ Industry Standard for Rotary pumps,
Vaccum Breaker
these are by far the heaviest duty, for
severe outdoor use in extreme weather
conditions
Ÿ Deliver media with a head / lift upto 20'
Discharge Spout
Ÿ Solid cast iron construction, fully CNC
machined to close tolerances
Ÿ Pump Handle rotates a high quality
sintered powder metal 3 Vane Rotor
inside a highly finished pumping chamber
Ÿ Graphite Veins are self lubricating & non
Nozzle Holder
wearing
Ÿ High Quality graphite Seal allows the
pump to be used with a wide variety of
fluids including Diesel with upto 15%
Ethanol blend
Crank
Ÿ Self Priming operation with discharge up
to 38 LPM (10 GPM)
Non
Sparking
Aluminum
Nozzle
Grip
Ÿ Supplied complete with 2" Bung,
Telescopic Suction Tube with Strainer for
use with 15 gallons (50 litre) – 55 gallons
(205 litre) barrels
Ÿ Also available - Drip pan for use with the
Flame
Arrestor
above pump
WETTED COMPONENTS
Cast Iron, Steel, Graphite, Paper,
Polypropylene
2” Bung
DO NOT USE
With Water Based Media
8’ x 3/4”
Anti Static
Fuel Hose
PUMP CHAMBER WITH 3 VEIN CONSTRUCTION
Sintered
Powder
Metal
Rotor
Graphite
Veins
CC 92
Telescopic
Suction Tube
RBP/3V/H/F
FM Approved Pump with 8' Anti Static
Hose, Nozzle, Nozzle Holder, Flame Arrestor
& Vacuum Breaker. For use with Class I &
Class II flammable & combustible liquids
such as Gasoline, Naphtha, Alcohols &
other solvents compatible with the pump
components. Ideal for quickly refueling
gasoline powered vehicles or equipment
fuel pumps & accessories
Variants
Drip Pan
DP/RBP/3V
RBP/3V
Pump with Steel Discharge
Spout for use with Petroleum
based fluids, Diesel & Kerosene.
Ideal for use with Barrels,
drums & tanks for transferring
media into smaller containers
RBP/3V/F
FM Approved Pump with Drip pan &
Flame Arrestor. For use with Class I &
Class II flammable & combustible
liquids such as Gasoline, Naphtha,
Alcohols & other solvents compatible
with the pump components
RBP/3V/H
Pump with 8' Antistatic Hose, Nozzle &
Nozzle Holder for use with Petroleum
base fluids, Diesel & Kerosene. Ideal for
use with Barrels, Drums & tanks for
quickly refueling Diesel powered
vehicles or equipment
38 LPM (10 GPM)
Ordering Information
CAT. NR.
*
RBP/3V
RBP/3V/H
ORDERING NR.
KIT/RBP/3V
Includes pump head gasket, graphite
veins (3), vein springs (3), shaft nut,
packing & packing nut
DESCRIPTION
44080
44081
Steel Spout
8’ Anti-Static Hose, Non-Sparking Aluminum
Nozzle & Nozzle Holder
RBP/3V/H/F
44082
RBP/3V/F
DP/RBP/3V
44084
44083
8’ Anti-Static Hose, Non-Sparking Aluminum
Nozzle & Nozzle Holder, Vaccum Breaker &
Flame Arrestor
Steel Discharge Spout, Drip Pan with Flame Arrestor
Replacement Drip Pan only
44086
44338
Repair Kit
8’ x 3/4” Replacement Hose
FM Approved Pumps
Service Parts
KIT/RBP/3V
SA/HOS/RBP/3V
Key
*
Best Seller
CC 93
88
fuel pumps & accessories
Rotary Booster Pump 3:1
ESP Bomba rotativa - elevador 3:1
FR Pompe à rotation de rappel 3:1
DE Kurbelpumpen 3:1
RB-3
Product Features
Ÿ Geared Rotary barrel pump with 3 times
discharge per rotation. For every complete
handle turn, the rotor turns 3 times
“Built-In”
Nozzle
Holder
Ÿ Ideal for use where volume fuel
dispensing is needed, such as
construction sites, workshop, aviation,
farms / ranches, boat etc.
Ÿ Die Cast Aluminum construction with
sintered gear driven die cast zinc rotor &
vanes
Ÿ Discharge through 1.8 m of delivery hose
with metal nozzle
Ÿ Complete with a 3 pc threaded suction
tube for use on 15 gallons (50 litre) – 55
gallons (205 litre) barrels
WETTED COMPONENTS
Aluminum, Zinc, Steel, NBR & PVC Nitrile
2” Cast Iron
Bung Adaptor
RECOMMENDED USE
Gasoline, Diesel Fuel, Kerosene &
Lubricating Oils up to SAE 30
DO NOT USE
With Corrosive liquids, solvents, acids,
alkalis etc.
Aluminum
die cast handle
with security
locking latch
PUMP INTERNALS
Available as spare:
1.8 m discharge hose
with metal nozzle,
spring & hose clamp
Cat. Nr. SA/HOS/AA92/A2
Ordering Nr. 44339
Out
Zinc
Vanes
In
Drive
Shaft
Gear
Mechanism
Note that fuels containing Ethanol will cause
more frequent replacement of rubber parts
Ordering Information
CAT. NR.
RB/3H
CC 94
ORDERING NR.
44198
Dispenses 55 gallon / 205 litres
in 3 minutes
Never operate the pump near fire or source of
spark. Some media may be explosive &
dangerous to pump
89
fuel pumps & accessories
Double Diaphragm Fuel Transfer Pump
ESP Bomba de transvase-diafragma
FR Pompes de transvasement a membrane
DE Handpumpen, doppelt wirkend
DPP-1
Product Features
“Built-In”
Nozzle
Holder
Ÿ Heavy Duty Fuel Transfer pump with
discharge up to 1 gallon per 5 strokes
(800 ml / stroke)
Ÿ Ideal for use where compressed air / power
is not easily available such as farms /
ranches, construction sites, boat etc.
Ÿ Stainless Steel Piston & fuel resistant hinitrile rubber diaphragm
Ÿ Includes a 2” die cast bung adaptor & extra
Security
Locking Latch
heavy duty steel handle with security
locking latch
Ÿ Pump inlet fitted with easy to clean wire
Stainless
Steel Piston
mesh screen
Ÿ Complete with telescopic suction tube with
non-return valve
Ÿ For use with 15 gal. (50 litre) - 55 gal.
(205 litre) drums
WETTED COMPONENTS
Aluminum, Steel, Stainless Steel, Poly
Acetal & NBR
Heavy
Duty
Aluminum
Die Cast
Construction
Discharge through
8’ of anti-static
neoprene rubber
hose with die cast
nozzle
RECOMMENDED USE
Gasoline, Diesel fuel, Fuel Oil, Motor Oil &
other light petroleum products
2” Die Cast
Bung Adaptor
DO NOT USE
With Corrosive liquids,
solvents, acids, alkalis etc.
PUMP INTERNALS
Note that Fuels containing Ethanol will cause more frequent
replacement of rubber parts
Out
Do not use with Fuels with Ethanol content greater than 10%
Never operate the pump near fire or source of spark. Some media
may be explosive & dangerous to pump
Stainless
Steel
Piston
Pump is designed primarily for use with low viscosity media.
Pumping heavy fluids may cause undue stress resulting in fracture
Diaphragm
Non Return
Reed Valves
Ordering Information
CAT. NR.
ORDERING NR.
DPP/1
Service Parts
SA/HOS/RBP/3V
GKT/DPP/1
44195
Complete Pump
DESCRIPTION
44338
44194
8’ x 3/4” Replacement Hose
Non Return Reed Valve Kit
1 gallon in 5 strokes
(800 ml per stroke)
In
CC 95
90
fuel pumps & accessories
Heavy Duty Electric Fuel Pumps
ESP Bomba Electricas de gasolina
FR Pompe electrique de transfert gasoil / Fuel
DE Elektro Kraftstoffpumpe
FPM
Product Features
Ÿ Heavy Duty Industrial Grade Fuel pumps designed for Every Day
Ÿ Designed such that the motor cannot be switched ON without removing
use in Agricultural, Construction, Automotive & Industrial
applications
Nozzle from the Nozzle Hanger
Ÿ Low Current Draw increases usage life from a single charge of battery on
Ÿ Rain & Weather proof for tough outdoor use
DC pumps
Ÿ UL & cUL listed Motor
Ÿ Lightweight, yet strong non corroding Aluminum Die cast
construction
Ÿ Duty Cycle: 30 Minutes On / 30 Minutes Off
Ÿ Geared pump design using precision sintered metal gears
WETTED COMPONENTS
Aluminum, Steel, Cast Iron, Nylon, NBR, Zinc, Viton, Polypropylene, PVC
Ÿ Geared construction makes the pump tolerant to contaminants in
fuel; in addition to offering tremendous suction & minimal noise
RECOMMENDED USE
Gasoline, Diesel, E15 Fuel, Kerosene, Bio Diesel (B20)
12’ x 3/4” Anti Static
Rubber Hose
Wire Mesh
Strainer
designed for
easy cleaning
without pump
disassembly
Provision to
Pad Lock
ON/OFF Switch
Nozzle Hanger for
safe storage of nozzle
when not in use
Manual Fuel Control
Nozzle with
Built-in Swivel
CC 96
18’ long 2 Wire
Cable
Convenient
Spin Collar for
easy installation
2pc threaded Suction
Tube 34” (864 mm) long
fuel pumps & accessories
PUMP INTERNALS
Out
Sintered Powder
Metal Gears
Wire Mesh
Strainer
In
Pump Specifications
Description
Flow Rate*
Explosion Proof Motor
Amp draw from Battery
Internal Bypass Valve
Suction Pipe
Hose
Tank Adaptor
Inlet
Outlet
Dispensing Nozzle
Battery Cable (2 wire)
FPM-12
FPM-24
FPM-115
FPM-220
Heavy Duty 12V DC
Upto 15 GPM (57 LPM)
1/4 HP 12V DC
12 Amp
Yes
2 pc threaded
3/4” x 12’ Anti Static Hose
2” Threaded
1” NPT
3/4” NPT
3/4” Manual with Swivel
18’
Heavy Duty 24V DC
Upto 15 GPM (57 LPM)
1/4 HP 24V DC
6 Amp
Yes
2 pc threaded
3/4” x 12’ Anti Static Hose
2” Threaded
1” NPT
3/4” NPT
3/4” Manual with Swivel
18’
Heavy Duty 115V AC
Upto 15 GPM (57 LPM)
1/4 HP 115V AC, 60 Hz.
1.7 Amp
Yes
2 pc threaded
3/4” x 12’ Anti Static Hose
2” Threaded
1” NPT
3/4” NPT
3/4” Manual with Swivel
NA
Heavy Duty 220V AC
Upto 15 GPM (57 LPM)
1/4 HP 220V AC, 50/60 Hz.
1 Amp
Yes
2 pc threaded
3/4” x 12’ Anti Static Hose
2” Threaded
1” NPT
3/4” NPT
3/4” Manual with Swivel
NA
*measured at pump outlet with vehicle engine switched on
Ordering Information
*
CAT. NR.
ORDERING NR.
FPM-12
FPM-24
FPM-115
FPM-220
44040
44041
44042
44043
FLOW
Key
*
Best Seller
Flow Rate: Upto 15 GPM (57 LPM) *
CC 97
91
fuel pumps & accessories
Fuel Filter
ESP Filtro de Fuelle
FR Filtro de Fuelle
DE Fuel Filter
FFL-02
Product Features
Ÿ High Flow Fuel filter, complete with 10 micron
Aluminium die cast
filter head is threaded
1” at the inlet & outlet
fuel filter element
Ÿ Durable & lightweight design for easy
installation on both mobile & stationary fuel
tanks and on gasoline & diesel fuel pumps
Ÿ Ideal for use in agricultural & industrial
applications
Ÿ Rust & weather resistant for years of service
Ÿ The 10 micron paper filter element filters
even small particles of rust, scale, grit, dirt,
sand & lint at a gravity flow of 19 litres /
minute (5 GPM) with only a 24" (600 mm)
head. The filter element has 366 square
inches of filtering surface which results in
more particle retention, which means cleaner
fuel, and fewer costly engine repairs
Translucent polypropylene
filter bowl gives a visual
check of the filter element
& permits removal of
sediment & water in the bowl
Ÿ Replacement filter elements available as
spare
Ÿ Also available water block fuel filter element
which separates water from fuel
WETTED COMPONENTS
Aluminum, Polypropylene, NBR, Steel, Paper
element, Nylon, Brass
RECOMMENDED USE
Gasoline, Diesel Fuel
DO NOT USE
With water based products, Gasohol,
Aviation fuels, Race fuels etc.
Brass drain cock can be
operated by a simple turn
& releases accumulated
water & unwanted
contaminants
Replacement Filter
Element
FUEL FILTER INSTALLATION
Fuel Tank
Max. Working
Pressure
150 PSI
(10 BAR)
Cut Off Valve
between Filter & Tank
Inlet
Outlet
Filter Head
Gasket
Discharge Hose
Filter Element
Ordering Information
CC 98
CAT. NR.
ORDERING NR.
FFL/02/BSP
FFL/02/N
FF/FFL/10
FF/FFL/10-WB
44390
44391
44395
44397
DETAILS
Threaded 1” BSP
Threaded 1” NPT
Fuel Filter Element 10 microns
Water block Fuel Filter Element 10 microns
Control
Nozzle
Filter Bowl
Drain Valve
92
fuel pumps & accessories
Fuel Control Nozzles - Manual
ESP Pistola Manual
FR Pistolet Standard de Distribution Gasoil / Fuel
DE Standard-Füllpistole
FCN
Product Features
Ÿ For use with Electric
Fuel Pumps & gravity
feed applications
Ÿ All Metal Construction
6-5
/16
with the Body,
Discharge Spout, Trigger
& Guard made from
Aluminium
” (1
60
mm
)
Ÿ Hose Swivel at Inlet for
increased
maneuverability &
convenience in use
Aluminium
Discharge
Spout
Ÿ Manual control. Also
includes continuous
flow switch for
unattended dispensing
Ÿ Designed for minimal
back pressure &
reduction in flow
Ÿ 6-5/16” (160 mm) long
Spout
Trigger Guard
Ÿ For use with Diesel,
Kerosene & Petrol
WETTED
COMPONENTS
Aluminum, Steel, Nylon,
Nitrile Rubber
Trigger
Note
Fuel Nozzles can also be
custom manufactured with
curved Discharge Spout
Continuous
Flow Switch
Hose
Swivel
Ordering Information
CAT. NR.
FCN/S/3-4/3-4/BSP
FCN/S/0-1/0-1/BSP
FCN/S/3-4/3-4/N
FCN/S/0-1/0-1/N
ORDERING NR.
INLET THREADS
45580
45581
45590
45591
3/4” BSP (F)
1” BSP (F)
3/4” NPT (F)
1” NPT (F)
OUTLET OUTSIDE DIA.
3/4” (19 mm)
1” (25 mm)
3/4” (19 mm)
1” (25 mm)
CC 99
93
fuel pumps & accessories
In-Line Fuel Meter
ESP Contador para gasolina
FR Compteurs mecaniques Gasoil / Fuel
DE Zähler
DM-100
Product Features
Ÿ Extremely Compact & High
Accuracy Flow meter with
Mechanical Register
Ÿ Handles a wide range of fluid
viscosities upto 1000 cPs
Ÿ Meter is designed for both
pump In-Line applications &
gravity flow applications
(with a minimum gravity
head of 550 mm
6 Digit
Accumulative Totalizer
(max. 999,999 litres / gallons)
Ÿ Built using Oval gear
technology for highest
accuracy (+/- 1% of reading)
Ÿ Register cap can be easily
removed & rotated to every
90° orientation for display
reading
Ÿ Supplied with integrated
4 Digit
Re-Settable Batch Totaliser
(max. 999.9 litres / gallons)
mesh strainer
Ÿ Available in a choice of litre /
gallon version
WETTED COMPONENTS
Aluminum, Steel, PEI Resin,
Viton
RECOMMENDED USE
Diesel, Gasoline, Kerosene &
oils with viscosity upto
1000 cPs
Note
Not to be used to measure media
for resale
TEMPERATURE
Range: 10° C (14° F) to 80° C (176° F)
Ordering Information
CC 100
CAT. NR.
ORDERING NR.
THREADS
(INLET/OUTLET)
UNIT OF
MEASURE
MFM/DM100/BSP
MFM/DM100/N
MFM/DM100G/N
45630
45631
45632
1”BSP (F)
1” NPT (F)
1” NPT (F)
Litre
Litre
Gallon
Max. Working
Pressure
145 PSI
(10 BAR)
FLOW
3 to 80 LPM (0.8 to 21.1 GPM)
94
fuel pumps & accessories
Fuel Flow Meter ( In-Line Flow Meter )
ESP Contador para gasolina
FR Compteurs mecaniques Gasoil / Fuel
DE Zähler
M10
Product Features
Ÿ High Accuracy Flow meter
with Mechanical Register
6 Digit Accumulative Totaliser
(max. 999,999 litres / gallons)
Ÿ Handles a wide range of fluid
viscosities with exceptional
levels of repeatability &
durability
4 Digit Re-Settable
Batch Totaliser
(max. 999.9 litres / gallons)
Ÿ Meter is designed for both
gravity & pump In-Line
applications
Ÿ Built using Oval gear
technology for highest
accuracy (+/- 1% of reading)
with a repeatability of 0.03%
Ÿ Meter design allows for both
horizontal & vertical mounting;
as well as fast & easy on site
servicing without removal from
application
Ÿ Supplied complete with
Calibration certificate
Ÿ Available in a choice of litre /
gallon version
WETTED COMPONENTS
Aluminum, PPS (Polyphenylene
Sulphide Resins), 316 Stainless
Steel, Nitrile Rubber
Inlet / Outlet: 1” (F)
RECOMMENDED USE
Fuels & Oils with viscosity upto
1000 cPs
Note
Not to be used to measure media
for resale
TEMPERATURE
Max. Temp: 80° C (176° F)
FLOW
Ordering Information
CAT. NR.
ORDERING NR.
MFM/M10/BSP
MFM/M10/N
MFM/M10G/N
45601
45613
45614
THREADS
(INLET/OUTLET)
1”BSP (F)
1” NPT (F)
1” NPT (F)
UNIT OF
MEASURE
Litres
Litres
Gallons
Max. Working
Pressure
500 PSI
(34.5 BAR)
For Fluids with viscosity above 5 cPs:
6 to 120 LPM (1.6 to 32 GPM)
For Fluids with viscosity below 5 cPs:
10 to 100 LPM (2.6 to 26 GPM)
CC 101
95
fuel pumps & accessories
Lever Action Bio-Diesel & E85 Fuel Pump
ESP Bomba de transvase - Bio-Diesel
FR Pompe à levier - Bio Diesel
DE Faßpumpen - Bio Diesel
LBP-85
Product Features
Ÿ An extremely rugged & strong
all steel pump designed
specifically for use with Bio
Diesel & E85 fuels
Ÿ Constructed from select
materials which are compatible
with Bio Diesel & E85 fuels
Ÿ Fracture proof design with
steel pump head & bung
Ÿ Extra long pump body makes it
easy to place refill containers
on the drum for convenient
filling
Ÿ Complete with telescopic
suction tube for use on 15
gallons (50 litre) – 55 gallons
(205 litre) barrels
Fracture proof
steel pump head
WETTED COMPONENTS
Steel, Viton & PTFE
RECOMMENDED USE
Bio Diesel & E85 fuels
DO NOT USE
With Corrosive liquids,
solvents, acids, alkalis etc.
11” (280 mm)
clearance between
the outlet & drum
for convenient
placement of
refill containers
300 ml (10 oz.) / stroke
Never operate the pump near
fire or source of spark. Some
media may be explosive &
dangerous to pump
Steel bung with
2” threads
Ordering Information
CC 102
CAT. NR.
ORDERING NR.
FOR USE ON
LBP/85
44109
15 gal. (50 litre) 55 gal. (205 litre)
drums