cherne industries inc.

11
12
13
14
16
Cherne Industries Inc.
Capabilities Catalog
17
ISO 9001 Certified
11b
11a
AIR-LOC®
SMOKE BLOWER
AIR-LOC®
LINE STRINGER
•“Liquid smoke” or traditional
“smoke bomb” blowers available.
•Will string a 300 foot section of
sewer line in under one minute
without plugging the line.
•Aluminum design is lightweight
& does not rust.
•Will disperse smoke throughout
the test area at up to 4000 CFM.
•Aluminum design is lightweight &
does not rust.
•Using Cherne Smoke Generating
Devices (SGD’s) or Smoke Fluid
insures a reliable & cost effective test.
•Fastest and most reliable way to
string a sewer line for deflection
testing, leak location testing, sewer
cleaning, and video inspections.
•SGD’s available in 4,000, 8,000,
& 40,000 cubic foot sizes.
•Blowers available with Honda or
Briggs & Stratton Engines.
BIG MOUTH®
FLOW-THROUGH
PLUGS
•Available in single-sizes
6" to 24".
•Available in multi-sizes from
6-10" to 18-24".
T-Handle
Gripper® Plugs
JET-BALL® PIPELINE
CLEANING BALL
•Available in sizes 6", 8", 10", 12",
15", & 18".
•Available in sizes 6-10", 10-14",
& 15-18".
•Large T-Handle gives better leverage.
•Inexpensive way to clean new lines
prior to line acceptance testing.
AIR-LOC®
Testing Products
•Works great for cleaning grease out
of existing lines.
•Line Acceptance Kit - Allows
testing of sewer line end to end.
•The better alternative to an
expensive jet truck.
•Leak Location Accessories - 500'
triple hose reel, winch, and cable
guides available
•Available in by-pass & non
by-pass designs.
•Made from rust-proof &
rust-resistant components.
•Neoprene “O” ring for enhanced resistance to petroleum hydrocarbons.
•Large flow-through design allows
by-passing.via gravity.
•Short design for ease of
insertion.
•Swivels on front & back allows easy
rotation in pipe.
DEFLECTION
GAUGES/MANDRELS
15
•Sizes up to 60" & custom sizes
also available.
•Both fixed steel or adjustable
aluminum designs.
•Smoke fluid is available in 1, 5,
and 55 gallon containers
•Fixed Steel Gauges are zinc plated
resisting rust & corrosion.
•Aluminum Fin Sets allow interchangeable fins for various pipe sizes.
•Smoke Blowers available with
Briggs & Stratton engines.
•Steel & aluminum gauges utilize a
nine arm design.
11b
For Complete Catalog Contact:
Cherne Industries Incorporated
5700 Lincoln Drive
Minneapolis, MN, 55436
Phone: 800-843-7584
Fax: 800-843-7585
Web: www.cherneind.com
Form No. LCS 805 B
Distributed by:
Rev. 8/13
11a
11
17
12
14
15
16
13
2
1
2
3
4
5
6
8
9
10
7
(Shown with optional
tank & wheel kit.)
Large Multi-Size
Test-Ball® &
Muni-Ball® Plugs
AIR-LOC® LEAK
LOCATOR PLUGS
AIR-LOC®
VENTILATOR
AQUA-LOC®
HYDROSTATIC
TEST PUMPS
•Sizes Available: 15-30", 20-40",
24-48", 24-60", 48-72" and 54-96"
•Available in multi-sizes from 6-10"
to 54-96"
•Conforms with OSHA guidelines
for confined space entry.
•Piston pump supplies up to 10
gpm at 450 psi.
•15-30", 20-40", 24-48" and 24-60"
plugs all fit through 20.5" openings
•Ideal for both sewer air & leak
location testing.
•May be used for blow-in or
suction ventilation.
•Diaphragm pump supplies up
to 9.5 gpm at 550 psi.
•24-42" plugs fit through
22" openings
•Removable air fittings for
customizing air connections.
•Provides up to 2,300 CFM
as a blow-in ventilator.
•The 40-60" is able to fit through 30"
manholes.
•Flexible internal hoses allow plug
to bend 90 degrees for tight
installations.
•Provides up to 4,000 CFM as
a suction ventilator.
•48-72" and 54-96" plugs are able to
fit through 36" openings
•Reinforced with cording.
•Reinforced with cording.
•Aluminum design is lightweight
and does not rust.
•Blowers available with Honda
or Briggs & Stratton Engines.
•Bladder is replaceable.
•Flexible bypass allows plugs to
bend up to 90 degrees.
POINT REPAIR
CARRIERS
TEST-BALL® &
Muni-Ball® PLUGS
REMO® REMOTE
PLACEMENT PLUGS
AIR-LOC®
JOINT TESTERS
AIR-LOC® MANHOLE
TESTERS
•Flexible design allows for easy
maneuverability in pipes with offset
joints or bends
•Test-Balls available in single sizes
from 3/4" to 15"; multi-sizes from
3/4"-1.25" to 12-24"
•Available in sizes 6-10", 8-12",
& 12-18".
•Standard sizes from 21" - 120".
•Custom Sizes Available.
•Plate style head sizes in 32",
38", & 44".
•Muni-Balls available in multi-sizes
from 4-6" to 12-24"
•Adjustable wheels featuring
hand cranks.
•24", 26", 29", 30", 32", 34",
and 36" sizes
•High-Volume diaphragm pump
supplies up to 35 gpm at 290 psi.
•Lightweight natural rubber design
allows for ease of handling and
installation
•Eliminates the need to enter
confined spaces.
•Speeds up the pipe plugging
process.
•Bladder style head assembly has
easy-to-adjust pushpin system.
•All quick-disconnect fittings are
color-coded for fast setup, even
for the infrequent user.
•4-6" Carrier features a
non-bypass cone-shaped nose
design
•Aluminum Construction - light
weight for ease of movement.
•Allows easy positioning,
inflation, and removal of the plug
from the surface.
•Can be purchased without wheels
or panel to minimize cost.
•Both the plate and bladder style
head assemblies are made of
lightweight aluminum.
•Operating instructions permanently attached for ease of use.
•6-10" & Larger Carriers
features:
- 2" bypass w/ integrated
cage/wheel design
- Cable loop equally distributes pull
while centering carrier in pipe
- Centered air inflation port offers:
+ Superior push rod utilization
+ E
ase of connection & replacement
+ Less hose resistance
•Pumps available with Honda Oil
Alert®; or Briggs & Stratton Oil
Guard® engines (High volume pump
only available with Honda Engine)
•Work in all types of pipe - sealing
the roughest surfaces.
•Muni-Balls equipped with flow
through for bypassing effluent
or conducting air tests.
•Test-Balls work well for blocking
flow or sealing pipes.
• Easy to use push button
aluminum pole system.
•Self-lubricating graphite-vane
vacuum pump.
• Adapters available to convert
bypass plugs to Remo Plugs.
•Aluminum filter jars.
•4" face oil-filled test pressure gauge.
•Vacuum Generator utilizes an air
compressor to create vacuum.
3
10
4
9
8
1
7
5
7
6