here - Push Mobility

New range of wheelchairs
PRODUCT CATALOGUE
1
Boarding from the back
correct standing position
One of the main problems of any wheelchair is that, it
can only be‫ ‏‬front-mounted. This is a problem because
wherever a person is sitting, like a‫ ‏‬couch, bed, toilet seat
or a chair, his front side is always free and his body is‫‏‬
always resting on his back. For this reason paraplegic
people have to lift their‫ ‏‬body with their arms and throw
themselves onto their wheelchairs in order to‫ ‏‬transfer
their body from a bed or a chair.‫‏‬
Standing wheelchair-like devices that can move while
standing up, usually‫ ‏‬cannot lift their users to a fully upright
position. HKAFO (long leg braces)‫ ‏‬like walking aids can
only be used with canes or walkers. To maintain his/‫ ‏‬her
balance while using these devices the user must manually
hold these‫ ‏‬canes or walkers. In contrast, the TEK Robotic
Mobilization Device holds the‫ ‏‬user in an upright position
while leaving their hands free.‫‏‬
This motion of throwing the body is difficult, dangerous,
and almost impossible‫ ‏‬to do without assistance, especially for older and/or overweight people.‫ ‏‬In stark contrast,
the user who is also able to board the device securely
from its back can pull the TEK Robotic Mobilization Device easily. Mounting‫ ‏‬and dismounting from the device
can be done in a much safer way‫ ‏‬since the user is doing
so while in a seated position.‫‏ ‏‬
This position makes it possible for the user to reach and
perform many daily tasks such as cooking, washing dishes,‫‏‬
ironing, etc. comfortably in environments that are typically
not set up for‫ ‏‬people with physical disabilities. Movements
that require both hands, such‫ ‏‬as carrying a tray can be easily done with the use of the remote control.‫ ‏‬Additionally
the user can enjoy being at eye level with other people.‫‏ ‏‬
standing up and health
dimensions
As a mandatory daily exercise, it has been recommended that paraplegic people must stay in a standing‫ ‏‬position
for approximately one hour everyday or as advised by
their therapists. This exercise is of vital‫ ‏‬importance for
preserving the body’s health. Existing devices for standing up‫ ‏‬are either very slow or require too much effort.
By contrast, it is very easy and‫ ‏‬quick to stand up and sit
down with the TEK Robotic Mobilization Device.‫‏‬
Matia Robotics, created the TEK Robotic Mobilization Device not as a wheelchair alternative,
but as a brand new‫ ‏‬mobility platform that completely reimagines the way individuals with paraplegia and other walking disabilities‫ ‏‬are able to move in the world. You can now independently
and safely sit, stand, and navigate through environments that‫ ‏‬were once inaccessible. This is all
now possible, safe, and available in Australia through Push Mobility.‫‏ ‏‬
2
The suspension system, containing gas springs, balances
the weight of the user‫ ‏‬so that standing up requires just a
gentle pull. From the moment they wake‫ ‏‬up, users can
board the device and stand up without needing assistance from‫ ‏‬others. This comfort encourages the users
to stand up regularly throughout the day and complete
various daily activities while up.
Presently the TEK Robotic Mobilization Device is the
world’s smallest motorized‫ ‏‬standing movement device at
15.6″ wide and 29.5″ long (39.5‫ ‏‬cm X 75 cm). With these
dimensions it covers only one third of the space‫ ‏‬of a small
wheelchair, allowing users to pass through narrow‫ ‏‬spaces
which they cannot pass through using a traditional wheelchair of an average‫ ‏‬width of 60 cm.
The chair also assists users to reach places in their home
and offices,‫ ‏‬not possible with other device. Despite its
narrow dimensions,‫ ‏‬the TEK Robotic Mobilization Device
is an exceptionally well-balanced‫ ‏‬device. It grabs the users
from the balance points and prevents any‫ ‏‬misuse or unwanted movements that would result in a loss of balance.‫‏‬
Correct standing position and balance are preserved by the
TEK Robotic‫ ‏‬Mobilization Device at all times.‫‏ ‏‬
3
THE LIGHTEST JUNIOR
WHEELCHAIR IN THE WORLD
Designed for young users wanting the lightest wheelchair‫ ‏‬possible,
the Lasher Dasher offers much more.‫ ‏‬Made from Magnesium, which
is 63% lighter then‫ ‏‬titanium, the Dasher offers outstanding dampening properties.‫‏‬
OFF ROAD MODE
Clients around‫ ‏‬Australia have
been calling out‫ ‏‬for a chair that
does more and‫ ‏‬can go more places.‫ ‏‬The Push team has worked‫‏‬
with Lasher‫ ‏‬Sport to create an all
terrain‫ ‏‬mode, available on every
Push‫ ‏‬Mobility chair.
All terrain mode includes off
road tires, designed to‫ ‏‬go over:
unpaved roads, trails,‫ ‏‬beaches, or
any rough surfaces.
Off road wheels in conjunction‫‏‬
with the Freewheel wheelchair‫‏‬
attachment allows the Dasher‫ ‏‬to
go pretty much anywhere.
The Dasher comes standard‫ ‏‬with
a second lower bracket‫ ‏‬under the
footplate, which allows‫ ‏‬for quick
application and‫ ‏‬removal of the
Freewheel in‫ ‏‬seconds.‫‏‬
5
Quality is
Everything
Adjustable
Footplate
folding backrest
Families need a light chair to get in and out
of‫ ‏‬the car, they also want‫ ‏‬a compact chair.
The Dasher backrest‫ ‏‬has a simple pull cable
system, allowing‫ ‏‬the backrest to quickly and
easily fold down flush‫ ‏‬with the seat.
Unlike many other chairs on‫ ‏‬the market,
this backrest then locks into the‫ ‏‬folding position, making the chair easy to‫ ‏‬handle and
move around.
casters
Quality is everything when it comes to Lasher‫ ‏‬chairs. Frog
Legs half fork casters are sleek, lightweight‫ ‏‬and are extremely durable.‫‏‬
When used with EPIC Alloy Wide Soft Roll Casters‫ ‏‬the user
is presented with a very smooth ride.‫ ‏‬Available in many different colours, Lasher allows‫ ‏‬the user to tailor a design that
fits their personality.
depth growth
When kids grow so should their chair. The Lasher Dasher‫‏‬
offers 3‐5 inches of depth growth in each chair.‫ ‏‬Simply bring
the Lasher chair into any Push hub when needed and we
can‫ ‏‬make the growth, free of charge.
This removes the need for expensive growth‫ ‏‬kits, or the
need to be without the chair for days on end. The growth is
quick, simple and practical.‫‏‬
anti-tip bar
Safe and secure is how we like people to feel when using our‫‏‬
chairs, which is why Lasher has developed a height adjustable anti tipper that is light and strong. You can select either
a single or double‫ ‏‬anti tipper.‫‏‬
6
The tipper wheel can also be adjusted to offer more ground
clearance‫ ‏‬for advanced users. For the little pro’s out there,
the tip‫ ‏‬bar can be removed in seconds and put upside down
to avoid misplacing it.
When it comes to a junior chair, growth is everything. The‫‏‬
standard carbon fibre angle adjustable footplate is not only‫‏‬
extremely light, but also offers angle adjustment.‫ ‏‬The clamps
connecting the footplate to the chair frame are very easy to
adjust; an allen key is all that is needed.
The footplate‫ ‏‬and clamps have been designed to offer unrestricted growth‫ ‏‬with the ability to move the brackets up and
down the entire‫ ‏‬front hanger.
There is also the option of a flip back footplate‫ ‏‬for transfers
or the use of a lazy Susan transfer aide.‫ ‏‬For chair stability,
the Dasher casters are set forward so the‫ ‏‬full weight of the
user can be put through the front‫ ‏‬end of the chair without
flipping out.
7
magnesium
what is it?
Magnesium, the lightest structural metaL
Lasher Sport is always looking at other industries for
new‫ ‏‬technologies that can be adapted to the wheelchair industry‫ ‏‬and magnesium was a natural fit. The
benefits of magnesium‫ ‏‬over aluminium and titanium are evident - Magnesium,‫ ‏‬the lightest structural
metal, is 35% lighter than aluminium‫ ‏‬and 62% lighter
than titanium.
Magnesium has a superior‫ ‏‬strength to weight ratio
making it very light yet very strong.‫ ‏‬Magnesium is
also excellent at absorbing vibrations making its‫‏‬
dampening abilities and super smooth road feel a
benefit when‫ ‏‬used in a wheelchair frame. Ultimately,
the end product is an‫ ‏‬impossibly light wheelchair
with excellent ride capabilities.
bt-mg magnesium
STANDARD FEATURES:‫‏‬
Magnesium Alloy 1.375” Tube Frame‫‏‬
Uni-tine forks‫ ‏‬Spinergy LX Rear Wheels‫‏‬
Tension Cord Adjustable seating & backrest‫‏‬
Powder Coat Frame‫‏‬
Transport Weight - 8.4lbs (3.8kg)‫‏‬
Chair Weight - 15.5lbs (7kg)‫‏‬
Life Time Limited Warranty on frame
The BT-Mg was the first wheelchair with‫ ‏‬a magnesium frame. The BT-Mg cuts down on weight
by‫ ‏‬utilizing high tech laminated carbon fibre‫‏‬
sailcloth for seating, lightweight hardware,‫ ‏‬and
uni-tine caster forks.
8
bt-mg-a magnesium
bt-mg-as magnesium
STANDARD FEATURES:‫‏‬
Magnesium Alloy 1.375” Tube Frame‫‏‬
Adjustable Centre of Gravity‫‏‬
Uni-tine forks‫‏‬
Spinergy LX Rear Wheels‫‏‬
Tension Cord Adjustable seating & backrest‫‏‬
Powder Coat Frame‫‏‬
Transport Weight - 9.8lbs (4.4kg)‫‏‬
Chair Weight - 17.2lbs (7.8kg)‫‏‬
Life Time Limited Warranty on frame
STANDARD FEATURES:‫‏‬
Magnesium Alloy 1.375” Tube Frame‫‏‬
Frog Legs Ultra Sport Shock Absorbing forks‫‏‬
Frog Legs Rear Wheel Suspension‫‏‬
Spinergy LX Rear Wheels‫‏‬
Tension Cord Adjustable seating & backrest‫‏‬
Powder Coat Frame‫‏‬
Transport Weight - 12.6lbs (5.7kg)‫‏‬
Chair Weight - 19.7lbs (8.9kg)‫‏‬
Life Time Limited Warranty on frame
The BT-Mg-A is a magnesium frame and backrest chair similar‫ ‏‬to the base BT-Mg but the
centre of gravity is adjustable by‫ ‏‬up to an inch of
forward and rearward travel in half inch increments.‫‏‬
The BT-Mg-AS is an incredibly‫ ‏‬light weight front
and rear suspension chair with centre of‫ ‏‬gravity
adjustability. The rear suspension along and frog‫‏‬
leg shock absorbing front forks makes for a very
smooth ride.‫‏‬
The BT-Mg-A cuts down on weight by utilizing
high‫ ‏‬tech laminated carbon fibre sailcloth for
seating material, light‫ ‏‬weight hardware, Spinergy
Light Extreme rear wheels, and‫ ‏‬Uni-tine caster
forks.
The rear wheel centre of gravity adjustment
allows centre of‫ ‏‬gravity placement from 1.5” to
5”. The centre of gravity is‫ ‏‬easily adjusted by the
user and can be done in under 5 minutes‫ ‏‬with a
wrench.
9
aluminum
Taking a page from the mountain bike industry,
Lasher Sports use oversized‫‏‬1.5” aircraft aluminium tubes in the frame construction for strength
and durability. Our‫ ‏‬aluminium chairs feature
fixed or adjustable rear axles for increased‫‏‬
strength that also translate to added weight
savings.‫ ‏‏‬Wheelchairs shouldn’t be a compromise
between form and‫ ‏‬function, so we have included standard items on our wheelchairs‫ ‏‬that others
would consider optional extras: Spinergy rear‫‏‬
wheels come standard - these wheels are the
strongest and‫ ‏‬lightest wheels available.
Frog Legs forks - with polymer shock‫ ‏‬absorption, for the ultimate in smooth rides, tension
seating - for the perfect seating adjustment,
which you can tweak as needed.‫ ‏‬There are no
cheap plastic parts on these chairs, all brackets and fittings‫ ‏‬are precision machined out of
aircraft and aerospace aluminium‫ ‏‬for extra
durability.
From the frame, to the hand rims, to the‫ ‏‬caster forks, all our Lasher chairs can be custom
finished in a variety‫ ‏‬of ways - Powder Coating is
the standard finish. Similar to‫ ‏‬paint, but much
more durable, there are over 6,500 colours to‫‏‬
choose from, in almost any colour imaginable or
you may wish to choose one of‫ ‏‬11 wildly imaginative graphic schemes.
First the chair is highly‫ ‏‬polished, then anodized
through an electro-chemical process that‫ ‏‬is actually part of the aluminium. Anodizing creates a
beautiful‫ ‏‬finish. Alternatively you may wish to
choose a mirror-like shine, the frame takes on
a mirrored effect through meticulous‫ ‏‬polishing.
Lasher Sports also offer a limited lifetime warranty against structural‫ ‏‬defects in the frame.
10
bt-x
The BT-X combines everything you’d expect from a‫‏‬
Lasher Sport chair; durability, good looks, functionality‫ ‏‬and uncompromising quality and above else,
interchange ability. The‫ ‏‬BT-X was designed for the
user who does it all.‫ ‏‬In everyday mode, the BT-X
runs Spinergy LX‫ ‏‬wheels with high pressure, high
performance tires in‫ ‏‬the rear and Frog Legs forks
with soft roll casters on‫ ‏‬the front.
bt
STANDARD FEATURES:‫‏‬
6061 T6 Aluminium 1.5’ Tube Frame‫‏‬
Uni-tine forks‫‏‬
Spinergy Rear Wheels‫‏‬
Tension adjustable seating‫‏‬
Tension adjustable backrest‫‏‬
Powder Coated Frame‫‏‬
Chair Weight - 21.5lbs (9.8kg)‫‏‬
Life Time Limited warranty on frame‫‏ ‏‬
The BT everyday chair was born out of‫ ‏‬the minimalist approach. It is designed to‫ ‏‬be ultra-light
and ultra-tough while retaining‫ ‏‬a clean overall
look that functions‫ ‏‬superbly. Lasher Sports use
1.5” oversized‫ ‏‬aircraft aluminium tubes in the
frame‫ ‏‬construction for strength and durability.
In Multi-Terrain mode, the BT-X runs with‫ ‏‬Spinergy
SLX wheels with Schwalbe off road tires‫ ‏‬in the rear
and Frog Legs Forks with 6” x 1.5” soft‫ ‏‬troll casters
rotated forward on the frame. In Beach‫ ‏‬Mode, the
BT-X runs custom build 4” wide wheels‫ ‏‬with Beach
tires in the rear and 9” x 5” balloon tires‫ ‏‬rotated
forward of the frame for extra stability and‫ ‏‬flotation
on sand.‫ ‏‬Changing the chair from an everyday chair
to a‫ ‏‬beach chair or a multi-terrain chair takes only 5‫‏‬
minutes and requires no tools.
Simply remove the‫ ‏‬push button quick release rear
wheels and replace‫ ‏‬them with the beach wheels or
multi-terrain wheels‫ ‏‬- Pre-set at the Lasher Sport shop
to have adequate‫ ‏‬clearance between the tires and
seat. Then, remove‫ ‏‬the front caster assembly using
the quick release fliplock‫ ‏‬levers and replace with
BT-X and T-Trailer in Travel Mode
BT-X Multi-Terrain Mode
the beach wheel caster‫ ‏‬assembly or multi-use caster
assembly. That’s it, since the BT-X is specifically designed to use different‫ ‏‬tire and caster combinations,
there isn’t the‫ ‏‬problem of chair geometry changing
between wheel‫ ‏‬sets.
The seat angle or ‘dump’ is designed to be the‫ ‏‬same
with every wheel set.‫ ‏‬Switching your chair from one
mode to another‫ ‏‬can be done at home, or if traveling, it can‫ ‏‬be done in a hotel room, in a car, at the
beach, or‫ ‏‬anywhere that is convenient.‫‏‬
The base BT-X comes with a fixed centre of gravity.‫‏‬
However, an adjustable‫ ‏‬centre of gravity is available,
you can choose either the Mg-A‫ ‏‬style adjustable centre of gravity, or the Mg-AS style‫ ‏‬adjustable centre
of gravity with suspension.‫ ‏‬The Lasher Sport BT-X
offers so much versatility and usability.‫‏‬
The BT, like most of our chairs, features‫ ‏‬a fixed
rear axle for increased strength‫ ‏‬that also translates to added weight‫ ‏‬savings. Optional adjustable rear axle is‫ ‏‬also available.‫‏ ‏‬
11
bt-beach
get ready to get wet
bt-beach
STANDARD FEATURES:‫‏‬
Aluminium Tube Frame‫‏‬
Aluminium / Stainless Steel / Delrin components‫‏‬
Nylon Seating
Nylon Backrest‫‏‬
Lasher Sport forks‫‏‬
5” Wide Balloon Beach Casters‫‏‬
Delrin Caster and Wheel Bearings‫‏‬
Lasher Sport Beach Wheels with 4” Rims and Sun Hubs‫‏‬
Powder Coat Frame‫ ‏‬Water / Salt / and Sand Ready‫ ‏‬Lifetime Limited Warranty (Frame only)‫‏‬
The BT-Beach is the ultimate chair for those living near
the‫ ‏‬beach or who frequent the beach and are looking for
a beach‫ ‏‬specific chair that can be propelled by the chair
user.‫‏‬
The BT-Beach runs custom built 4” wide wheels with
beach‫ ‏‬tires in the rear and 9” x 5” Balloon tires rotated
forward with‫ ‏‬an aluminium frame and aluminium, stainless steel, and delrin‫ ‏‬components, this chair is designed
to get wet.‫‏‬
12
bt-trail
bt-atb
STANDARD FEATURES:‫‏‬
6061 T6 Aluminium 1.5” Tube Frame‫‏‬
Frog Legs Forks‫‏‬
Spinergy Rear Wheels‫‏‬
Tension Adjustable Seating‫‏‬
Powder Coated Frame‫‏‬
Chair Weight – 21.5 lbs. (9.8kg)‫‏‬
Life Time Limited Warranty on Frame‫‏ ‏‬
STANDARD FEATURES:‫‏‬
6061 T6 Aluminium 1.5” Tube Frame‫‏‬
12.5” x 2.125” Casters‫‏‬
Spinergy Rear Wheels‫‏‬
Tension Adjustable Seating‫‏‬
Powder Coated Frame‫‏‬
Chair Weight - 29.5 lbs. (13.4kg)‫‏‬
Life Time Limited Warranty on Frame‫‏ ‏‬
The BT-Trail is a cross between a capable outdoor
vehicle and‫ ‏‬everyday chair. With a wider caster
stance and caster forward‫ ‏‬design, that aligns the front
casters with the foot plate creating a longer wheel
base, this feature helps avoid ‘face‫ ‏‬plant’ issues that
can sometimes occur with casters that are located
behind‫ ‏‬the front foot rest. The BT-Trail is stable, trail
capable and very manageable at the‫ ‏‬same time.
The BT-ATB (All Terrain Beast) has 12.5” casters
and an extended‫ ‏‬wheel-base for increased mobility in
grass, dirt, mud, sand,‫ ‏‬snow and other outdoor conditions. Optional disc brakes create a‫ ‏‬very capable
chair suitable for: camping, fishing hiking,‫ ‏‬skiing, or
just getting outdoors, this chair was designed to be capable‫ ‏‬beyond the footpath. Additional extra options
include adjustable centre‫ ‏‬of gravity and rear wheel
shock absorption.
13
ath (all terrain handcycle)
The Lasher Sport ATH was specifically designed‫ ‏‬for use
off the pavement. A generous 6” of ground‫ ‏‬clearance helps
you get over rough trails and any type of‫ ‏‬terrain. The
frame is built from custom extruded‫ ‏‬magnesium tubing for
maximum strength and‫ ‏‬durability. The forks and backrest
are built from‫ ‏‬6061-T6 aluminium.‫‏‬
The ATH comes with more wheel options than any‫ ‏‬other
hand cycle - 26” mountain bike wheels with‫ ‏‬quick release
or bolt on axles; 650c road wheels to‫ ‏‬easily convert your
ATH to a road bike; Spinergy‫ ‏‬29’er wheel set that add
an extra inch and a half‫ ‏‬of ground clearance, or you may
choose to go with‫ ‏‬a 4” wide (100mm) rim and tire for snow
or sand.‫‏‬
Since the ATH is front wheel drive, the riding position‫ ‏‬is
familiar and comfortable. The seating has been‫ ‏‬designed to
be more upright and forward, so there is‫ ‏‬plenty of weight
on the front drive wheel to get up‫ ‏‬relatively steep slopes
without drive wheel slip.‫‏‬
The base ATH comes with Shimano SLX components‫ ‏‬and
Avid hydraulic disc brakes.‫ ‏‬The ATH comes in 19 standard and 48‫ ‏‬optional powder coat colour choices. Then we
put on‫ ‏‬our colour matched reflective decals so your bike is‫‏‬
more visible when riding at night.‫‏‬
14
ATH-FS ( ALL TERAIN HANDCYCLE - FULL SUSPENSION )
The Lasher Sport ATH-FS was specifically designed‫ ‏‬for the
serious off road enthusiast!‫ ‏‬Building on the success of the
ATH, the ATH-FS‫ ‏‬is an all wheel suspension hand cycle,
with dual‫ ‏‬independent a-arm rear suspension and patented‫ ‏‬single pivot articulating front wheel suspension.‫ ‏‬Wheel
travel is approximately 4.5” at each wheel.‫ ‏‬The main frame
is built from custom extruded‫ ‏‬magnesium tubing for maximum strength and durability.‫ ‏‬The over-sized front fork and
rear a-arms are‫ ‏‬6061-T6 aluminium.‫‏‬
The ATH-FS comes with many wheel options to‫ ‏‬include
26” or 29er Spinergy Xyclone disc wheels‫ ‏‬with bolt on
axles. Also available are the 26” Spinergy‫ ‏‬FreeRide/FallLine wheel set or the Bionx electric‫ ‏‬power drive wheel.
Schwalbe tires are standard‫ ‏‬on all wheel sets.‫ ‏‬Front and
rear hydraulic disc brakes are standard‫ ‏‬on all versions
of the ATH-FS.‫ ‏‬The ATH-FS comes in 3 configurations,
the ATHFS.‫ ‏‬1 is the entry level version, the ATH-FS.2 is
the‫ ‏‬mid-level version, and the ATH-FS.3 is the high-end‫‏‬
version.
The difference in each version is based on the bicycle
components, the wheel set, and the‫ ‏‬shock absorber type.
All versions of the ATH-FS‫ ‏‬come well equipped and ready
for some serious off‫ ‏‬road riding. The ATH-FS comes in
many standard powder coat‫ ‏‬colours and optional two-tone
powder coat colour‫ ‏‬choices that accent the suspension attributes of‫ ‏‬the bike. We put on our colour matched reflective‫‏‬
decals so your bike is more visible when riding at‫ ‏‬night.‫‏ ‏‬
15
lasher
mogo
baller elite
tennis elite
STANDARD FEATURES:‫‏‬
Magnesium Alloy 1.375” tube frame‫‏‬
Non-Adjustable all welded frame set‫‏‬
Height adjustable rear caster‫‏‬
Spinergy SLX Rear Wheels‫‏‬
Tension adjustable seating‫‏‬
Tension adjustable backrest‫‏‬
Powder Coated Frame‫‏‬
Chair Weight - From 22.5 lbs. (10.kg)‫‏‬
*Life Time Limited Warranty on Frame‫‏ ‏‬
STANDARD FEATURES:‫‏‬
Magnesium Alloy 1.375” tube frame‫‏‬
Non-Adjustable all welded frame set‫‏‬
Height adjustable rear caster
‫‏‬Spinergy SLX Rear Wheels‫‏‬
Tension adjustable seating‫‏‬
Tension adjustable backrest‫‏‬
Powder Coated Frame‫‏‬
Chair Weight - From 19.8 lbs. (9.0 kg)‫‏‬
*Life Time Limited Warranty on Frame‫‏ ‏‬
With an all magnesium frame, the Baller Elite was‫‏‬
designed to be the quintessential basketball chair.‫ ‏‬Light
and nimble, yet tough and extremely rigid,‫ ‏‬this basketball chair is tailored to the court.‫ ‏‬With a fixed rear axle
and full welded magnesium‫ ‏‬frame, this chair is designed for the player‫ ‏‬who knows exactly what they are
looking for in a‫ ‏‬basketball chair and demands only the
best. The‫ ‏‬Baller Elite comes equipped with Spinergy
SLX‫ ‏‬18 or 24 spoke wheels and Schwalbe court tires‫‏‬
for maximum acceleration and control.
The Magnesium Frame Tennis Elite is light‫ ‏‬and
nimble, but tough and extremely rigid, this‫ ‏‬tennis
chair is second to none on the court. With‫ ‏‬a fixed rear
axle and full welded magnesium‫ ‏‬frame, this chair is
designed for the new or experienced player and is the
most adaptive tennis chair on the market. The‫ ‏‬Tennis
Elite comes equipped with Spinergy‫ ‏‬SLX 18 or 24
Spoke wheels standard. To really‫ ‏‬make your chair oneof-a-kind, choose from‫ ‏‬over 6500 powder coat colours.
the GJX
the joey
Life is an adventure so get into it with a Mogo GJX suspension chair. The GJX is custom made to your exact
specs so it is ready to go where you are.
STANDARD FEATURES:‫‏‬
- Minimal bar frame
- Fixed or quick release folding backrest
- Fixed or adjustable axle
- Rear wheels 20” to 27” double walled alloy.
- Hard anodised push rims (no more getting your
hands dirty)
- Front wheels standard or Frogs Legs
- Camber degrees available – 2, 4, 6 and 8
- Seat width, depth and backrest height no min or max
- Colours – Over 2000 colour options and combinations available
- Upholstery, the backrest is the highest quality 420D
denier sail cloth, tension strap adjustable
- Ceramic bearings, as standard. Ceramic offer a
reduction in force and reduces the friction and rolling
resistance. Go faster longer.
Rear mounted air shocks with 40mm of travel will take
the hassle out of small steps and gutters, whil efroglegs
up front will take anything your beat up old footpath
will throw at them.
The GJX is made from strong, durable and proven T6
alluminium. It originates from the JAC frame, but for
those who really like to get off the beaten track and
give their chair a beating it can be modelled off of the
shadow or CamBar for the extra strength of a boxed
style frame.
As with all Mogo chairs your imagination is the Gjx’s
only limitation.
When the MOGO team went to work designing their
first ever kids chair, they were most aware of the fact
that kids grow! Through much research and trail
designs the JOEY was born, offering a paediatric chair
with the most growth available on the market today.
Starting from 8” wide the JOEY can be personalized
to any colour whether be it Kermit the Frog green or
Princess pink.
Bodypoint wheelchair and posting systems are also
available ensuring that every child has all the support
they need.
only limitation.
16
17
mogo
the jac
the jewel and crown
specifications
STANDARD FEATURES:‫‏‬
Front Seat Height 12 ” – 22″ ”‫‏‬
Back Rest Height 10 ”″ – 22 ”″‫‏‬
Seat Depth 8″” – 22”″‫‏‬
Seat Width 8″” – 22″”‫‏‬
Total Chair Width 22″” (15 x 15)‫‏‬
Centre of Gravity 0″” – 7”″ (adjustable)‫‏‬
Inside Wheel Clearance 0.25″” – 2.0”″‫‏‬
Footrest Width Standard or Taper‫‏‬
Cambers 0° – 20°‫‏‬
Front Seat Height 12 ” – 22″ ”‫‏‬
Back Rest Height 10 ”″ – 22 ”″‫‏‬
Seat Depth 8″” – 22”″‫‏‬
Seat Width 8″” – 22″”‫‏‬
Total Chair Width 22″” (15 x 15)‫‏‬
Centre of Gravity 0″” – 7”″ (adjustable)‫‏‬
Inside Wheel Clearance 0.25″” – 2.0”″‫‏‬
Footrest Width Standard or Taper‫‏‬
Cambers 0° – 20°‫‏‬
Including various options for:
Foot Plates‫ ‏;‏‬Hand rims‫ ;‏‬Casters‫ ;‏‬Side Guards‫;‏‬
Back Rests‫ ;‏‬Cushions; and Brakes.
Including various options for:
Foot Plates‫ ‏;‏‬Hand rims‫ ;‏‬Casters‫ ;‏‬Side Guards‫;‏‬
Back Rests‫ ;‏‬Cushions; and Brakes.
- T5 package which includes Spinergy LX
wheels, composite brakes, Frog Legs uni-tune
forks, side guards and 2″ Casters.‫‏‬
-Push Handles (Fixed or Removable)‫‏‬
- Skate wheel Anti-tip bar (fixed or removable)‫‏‬
- Cargo Net‫‏‬
- Leg Strap‫‏‬
- Plastic Drink Holder‫‏‬
- Aluminium Drink Holder‫ ‏‬- Wheelchair Torch
Let the rest live in your shadow
specifications
STANDARD FEATURES:‫‏‬
extras
18
mogo
the SHADOW
Light and extremely good value and otherwise
known as the jewel and‫ ‏‬crown, the JAC is one
of the lightest‫ ‏‬and practical chairs on the market
with‫ ‏‬everything you would expect from a‫ ‏‬quality Mogo product. The JAC with a‫ ‏‬fixed axel
state can weigh in as little as‫ ‏‬9kg complete with
wheels, side guards,‫ ‏‬brakes and cushion.‫‏ ‏‬
‫ ‏‬- Minimal bar frame‫‏‬
- Fixed or quick release folding backrest.‫‏‬
- Fixed or adjustable axle‫‏‬
- Rear wheels 20” to 27” double walled alloy.‫‏‬
- Hard anodised push rims (no more getting
your hands dirty)‫‏‬
- Front wheels standard or Frogs Legs.‫‏‬
- Camber degrees available – 2, 4, 6 and 8‫‏‬
- Seat width, depth and backrest height no min
or max‫‏‬
- Colours – Over 2000 colour options and combinations available.‫‏‬
- Upholstery, the backrest is the highest quality
420D denier sail cloth,‫ ‏‬tension strap adjustable.‫‏‬
- Optional ceramic bearings. Ceramic offer a
reduction in force and‫ ‏‬reduces the friction and
rolling resistance. Go faster longer.‫‏‬
extras
- T5 package which includes Spinergy LX
wheels, composite brakes, Frog Legs uni-tune
forks, side guards and 2″ Casters.‫‏‬
- Push Handles (Fixed or Removable)‫‏‬
- Skate wheel Anti-tip bar (fixed or removable)‫‏‬
- Cargo Net‫‏‬
- Leg Strap‫‏‬
- Plastic Drink Holder‫‏‬
-Aluminium Drink Holder‫‏‬
- Wheelchair Torch‫‏‬
The Shadow has a clean chair design offering
lower support‫ ‏‬tubing designed by users for
users! The Shadow brings‫ ‏‬greater strength and
durability. The lower tubing flows‫ ‏‬with the
design of the chair giving a smooth rolling look.‫‏‬
The shadow can keep up with all chair users
and‫ ‏‬has been designed to be compact and light,
without comprising‫ ‏‬on strength. With a minimal
and lightweight frame,‫ ‏‬the Shadow is great for
self-transporting wheelchair users.‫‏‬
- Minimal bar frame‫‏‬
- Fixed or quick release folding backrest.‫‏‬
- Fixed or adjustable axle‫‏‬
- Rear wheels 20” to 27” double walled alloy.‫‏‬
- Hard anodised push rims (no more getting
your hands dirty)‫‏‬
- Front wheels standard or Frogs Legs.‫‏‬
- Camber degrees available – 2, 4, 6 and 8‫‏‬
- Seat width, depth and backrest height no min
or max‫‏‬
- Colours – Over 2000 colour options and combinations available.‫‏‬
-Upholstery, the backrest is the highest quality
420D denier sail cloth, tension strap adjustable.‫‏‬
- Optional ceramic bearings. Ceramic offer a
reduction in force and reduces the friction and
rolling resistance. Go faster longer.
19
- Aluminium 7020 frame
- Open or closed frame design
- Forged design castor arm
- Airtech upholstery system
- Choice of anodised accent colours
- Individual specifications RGKi
specifications
STANDARD FEATURES:‫‏‬
7020 aluminium frame
Forged castor arm design
Q lock frame folding system
Q lock folding backrest
Airtech upholstery
Choice of accent colours
Scissor brakes.
- Titanium open frame design
- Adjustable centre of gravity
- Choice of castor and rear wheel sizes
- Individual specifications RGK
extras
Fold flat sideguard options
Push handle options
Ergonomic seating
Footrest options
Wheel, handrim and tyre options
Anti tip options
Brake options
people on the move
Airline travel? No problem! We designed a wheelchair
so portable it fits into aircraft overhead storage lockers
(and the boot of your car!)
TIGA FX folds into a briefcase style shape, ideal for
storage in tight spaces. Small car, no issue. Air craft
storage, no issue. The TIGA FX easily fits into
the overhead luggage compartment.
- Titanium closed frame design
- Adjustable centre of gravity
- Choice of castor and rear wheel sizes
- Individual specifications RGKi
Our Q-lock system ensures all the benefits of a folding
chair without compromising strength. The system is
simple, clean and streamlined enough to
meet all your travel needs.
A folding chair that is lightweight and
rigid - For people on the move.
20
21
“hell man, that’s
awesome, where’d
you get that from?”
DIEGO
spinergy wheels
Exclusive to Push Mobility and Mike
Box Wheelchairs,‫ ‏‬spinergy wheels have a
unique lace style‫ ‏‬spoke system. The overlapping spokes are‫ ‏‬designed to withhold
impact without compromising‫ ‏‬the wheel.
Spinergy wheels do not look like any other
wheel on the market and come in eight
colours,‫ ‏‬including multi-selection.‫‏‬
colours
Mike Box works with one of the best powder‫ ‏‬coaters in California offering hundreds
of‫ ‏‬colour options from matte, gloss or
metallic‫ ‏‬flake finishes. There is no colour‫‏‬
concept we won’t achieve.
Get from A to B in style and have fun along‫ ‏‬the way. Our suspension chair has adjustable springs suitable
for a ride, which is sporty or smooth.‫ ‏‬Don’t let the design of the chair fool you; this chair is‫ ‏‬full of smart
adjustments. Long gone are the days of‫ ‏‬feeling every bump in the road. Take on a 12 inch curb‫ ‏‬drop down
without blinking an eye.‫ ‏‬The Mike Box range is backed up with a 5‫ ‏‬year frame warranty.‫‏ ‏‬
be prepared for people to double take
at the sight of your suspension chair.
SPECIFICATIONS
STANDARD FEATURES:‫‏‬
Foot Plates‫ ‏‬Black Plastic‫ ‏‬Diamond Plate‫ ‏‬Aluminium
Diamond Plate‫ ‏‬Flared Sides‫ ‏‬Flared Back‫ ‏‬Adjustable‫‏‬
Hand rims‫ ‏‬Silver Anodized‫ ‏‬Black Anodized‫ ‏‬Blax
Knarled‫ ‏‬Vinyl Coated‫ ‏‬Q Grip‫ ‏‬Foam Coated‫ ‏‬Natural Fit Regular Oval and Thumb Guard‫ ‏‬Natural Fit
Regular with Super Grip Oval and Thumb Guard‫‏‬
Natural Fit Light Oval and Thumb Guard‫ ‏‬Natural Fit
Light with Super Grip‫ ‏‬Surge Hand rims‫ ‏‬Casters‫ ‏‬Half
Fork‫ ‏‬Frog Legs‫ ‏‬Mike Box 3″, 4″, 5″ or 10″ Caster‫ ‏‬Front
Seat Height 12 ” – 22″”‫ ‏‬Back Rest Height 10”″ – 22”″‫ ‏‬Seat
Depth 8″” – 22″”‫ ‏‬Seat Width 8″” – 22″”‫ ‏‬Total Chair Width
22″” (15 x 15)‫ ‏‬Centre of Gravity 0″” – 7”″ (adjustable)‫‏‬
Inside Wheel Clearance 0.25″” – 2.0″”‫ ‏‬Footrest Width
Standard or Taper‫ ‏‬Cambers 0° – 20°‫ ‏‬Side Guards‫‏‬
Aluminium Welded Standard‫ ‏‬Fabric‫ ‏‬Removable Plastic‫ ‏‬Removable Aluminium‫ ‏‬Removable Carbon Fibre‫‏‬
Back Rests‫ ‏‬Non-Adjustable with Leather‫ ‏‬Tension-Adjustable with Leather‫ ‏‬ADI Carbon Fibre with Active
Contour‫ ‏‬ADI Carbon Fibre with Deep Contour‫ ‏‬Brakes‫‏‬
ADI AL‫ ‏‬Custom Embroidery Available‫ ‏‬ADI Disc
Brakes‫ ‏‬D’s Locks‫ ‏‬Scissor Locks‫ ‏‬Push Locks‫‏ ‏‬
If you have a fabric on hand that you would like to
have on‫ ‏‬your backrest, the Mike Box team can make
it happen. Football‫ ‏‬colours or maybe even military
design, it’s all possible! ADI‫ ‏‬is offered as standard on
the Mike Box Suspension chairs with‫ ‏‬the full range
available.‫‏‬
Mike Box Designs operate under the mantra “If you
can‫ ‏‬dream it, we can build it!” This being said, Mike
Box Designs‫ ‏‬only teams up with the best equipment
manufacturers in the‫ ‏‬industry, to ensure all chairs are
of uncompromised quality‫ ‏‬and superior craftsmanship.‫‏‬
23
AFTER 10 YEARS OF
CRASH TEST DUMMIES,
THIS IS THE ONLY CHAIR
YOU CAN TRUST AT THE
SKATE PARK
wcmx
fox suspension
specifications
Front Seat Height 12 ” – 22″”‫‏‬
Back Rest Height 10″” – 22″”‫‏‬
Seat Depth 8″” – 22″”‫‏‬
Seat Width 8″” – 22”″‫‏‬
Total Chair Width 22″” (15 x 15)‫‏‬
Centre of Gravity 0”″ – 7”″ (adjustable)‫‏‬
Inside Wheel Clearance 0.25”″ – 2.0″”‫‏‬
Footrest Width Standard or Taper‫‏‬
Cambers 0° – 20°‫‏ ‏‬
Including various options for:
Suspension, Foot Plates‫ ‏;‏‬Hand rims‫;‏‬
Casters‫ ;‏‬Side Guards‫ ;‏‬Back Rests‫;‏‬
Cushions; and Brakes.
For over three decades, Fox has been the
industry‫ ‏‬leader in the design and development‫‏‬
of high performance shock absorbers and‫ ‏‬race
suspension. Fox has been welcomed into the
wacky world of WCMX.‫‏‬
extras
- Skate Wheel Anti-Tip Bar
(Fixed or Removable)‫‏‬
- Push Handles (Fixed or Removable)‫‏‬
- Cargo Net‫‏‬
- Leg Strap‫‏‬
- Plastic Drink Holder‫‏‬
- Aluminium Drink Holder‫‏‬
- Wheelchair Torch
Not designed for the faint-hearted, the WCMX chair will survive crashes,‫ ‏‬stacks, double
back flips and do it all again – just ask Nitro Circus’‫ ‏‬Aaron ‘Wheelz’ Fotherinham.‫ ‏‬Fox air
shocks allow you to jump down a three metre drop and land it‫ ‏‬as smooth as a 10” drop.‫‏‬
With easy access to caster pintle bolts, you can quickly interchange‫ ‏‬your standard day
casters with high performance skate casters.
24
25
the
smartdrive
The SmartDrive is a revolutionary new power
assist‫ ‏‬device that will change your life. It can
power‫ ‏‬you up steep hills, through carpet and
over‫ ‏‬grass. It is intuitive to use, just push to go
and‫ ‏‬brake to stop, it is that simple. It will go for
days‫ ‏‬on a single charge.
The SmartDrive user must take time to become‫ ‏‬accustomed to the Drive response and
performance‫ ‏‬by first practicing its operation in
a safe‫ ‏‬area that is free from hazards.
It is advised that the user become‫ ‏‬familiar with
the push recognition, braking‫ ‏‬response, acceleration/top speed, etc. of the device‫ ‏‬before
venturing out with the device, where‫ ‏‬potentially hazardous situations may exist. It is‫ ‏‬strongly
recommended that you do not attempt‫ ‏‬to use
the SmartDrive outdoors until it can be‫ ‏‬safely
operated indoors without difficulty.‫‏‬
NOTE: the addition of the SmartDrive to your
wheelchair‫ ‏‬may cause it to feel different. Take
the time‫ ‏‬to become accustom to this new feeling. Afraid of tipping over? Use Anti-Tippers.‫‏‬
Using‫ ‏‬Anti-Tippers substantially reduces the
risk of‫ ‏‬falling out backwards, which can cause
serious‫ ‏‬injury. It is recommended that you use
Anti-Tippers‫ ‏‬until you are completely comfortable with using‫ ‏‬the SmartDrive. Furthermore,
do not attempt to stop a moving‫ ‏‬wheelchair
with wheel locks. Wheel locks are‫ ‏‬not brakes.
If having trouble braking,‫ ‏‬ADI brakes may be
required.‫‏‬
The SmartDrive is a revolutionary new power assist‫ ‏‬device that will change your life. It can power‫ ‏‬you up steep
hills, through carpet and over‫ ‏‬grass. It is intuitive to use, just push to go and‫ ‏‬brake to stop, it is that simple. It will
go for days‫ ‏‬on a single charge. Plug in and get out there!‫‏‬
26
27
ADJUSTABLE
BED
LIBERTY HEALTHCARE CUSTOM BUILD
ADJUSTABLE BEDS
homecare
hi-lo
features
- Hi-Lo Function (vertical raising &
lowering of the bed)
- Direct Drive Motors for Head &
Leg Lift and Hi-Lo Function
- Soft Touch Corded Handset
- Massage System (optional)
- Maximum 280kg Capacity on Single Sizes
- Maximum 320kg on Double & Queen Sizes
- 25 year Warranty on Steel Frames
-10 year Warranty on Electrics
available sizes
Liberty Health Care custom build electric adjustable beds. Most beds have a 25 year
warranty and this warranty is supported through Push Mobility.
If you require an Australian built high quality electric adjustable bed and want the comfort of a good nights sleep as well as support seven days a week then look no further than
a Liberty Health Care Electric Adjustable Beds.
Push Mobility in conjunction with Liberty Healthcare provides nationwide expertise and
we will perform a needs analysis before sug­gesting any bedding solution. This ensures
you and your partner (if required) have the right solu­tion. We want to exceed your
expectations.
2’6″’’ Small Single
3’0″’’ Single
3’6’’″ King Single
4’6″’’ Double
5’0″’’ Queen
Split Queen (2’ x 2’6″’’)
Split King (2’ x 3’0″’’)
Companion Set
Standard Length 6’8’’″ (2030mm)
Liberty HealthCare’s HOMECARE HI-LO
Adjustable Beds are specially designed for high
care patients and with the carer in mind. The
Hi-Lo bed conveniently raises to the carers
standing position putting less strain on the carer’s back. The bed can then be lowered to the
normal bed height.
The Hi-Lo function is also of benefit for those
needing to transfer at certain heights. It features Hospital-Grade Linak motors and a high
quality steel frame to give you many years of
trouble free use.
Liberty HealthCare HOMECARE HI-LO Beds
can be custom made to suit the user and carer’s specifications. A large range of accessories
are available to make this very functional bed
look right at home in your bedroom, including
side grip handles, bed rails and head & foot
boards.
We also offer a matching flat companion bed
that can be used in a split queen or split king
set-up where one partner requires a functional
bed and the other partner doesn’t. Ask about
our companion sets available throughout our
range.
Push mobility and Liberty Healthcare have over 20 years experi­ence combined in the
healthcare industry and work exten­sively with occupational therapists, spinal wards, and
disability organisations
28
29
wheelchair
accessories/ options
eco-adjust
backrest options
cushions / pressure care options
postural supports
features
- Twin Drive Motor for Head & Leg Lift
- Corded Handset
- Maximum 100kg Capacity
- 5 year Warranty on Steel Frame & Electrics
available sizes
2’6″’’ Small Single
3’0″’’ Single
3’6’’″ King Single
Split Queen (2’ x 2’6″’’)
Split King (2’ x 3’0″’’)
Companion Set
Standard Length 6’8’’″ (2030mm)
30
Liberty HealthCare’s ECO-ADJUST bed is
the base model of our adjustable bed range.
This economical and functional adjustable bed
offers head and leg adjustment at an affordable
price.
he ECO-ADJUST by Liberty HealthCare is
a lightweight base model adjustable bed for
those looking for comfort at a budget price.
The ECO-ADJUST allows you to adjust the
height of the head and leg section, so you can
rest comfortably.
We also offer a matching flat companion bed
that can be used in a split queen or split king
set-up where one partner requires a functional
bed and the other partner doesn’t. Ask about
our companion sets available throughout our
range.
push handles
wheels & caster options
31
go further
Driving a manual wheelchair often takes too much effort. Not to mention negotiating challenging slopes, thresholds or curbs. Even those who are physically fit,
cannot go everywhere. With the innovative WheelDrive power assist for manual
wheelchairs, Handicare shows that things can be different.
The WheelDrive has been developed in close cooperation with Indes (a company specialized in ‘user centred industrial design’ and known for the Sparta ION,
a revolutionary e-bike). The Roessingh, a renowned rehabilitation centre in the
Netherlands, has also played a key role in the development.
This expert approach, which involved extensive clinical testing and various user
tests, has resulted in what we believe is the next generation power assist for
manual wheelchairs.
WheelDrive goes further than any other solution on the market.
33
making a difference to
many peoples lives
WheelDrive works for you! Easy fit on almost
any wheelchair, without any additional parts
The WheelDrive fits on almost all common manual
wheelchair models. That makes this power assist a great
solution for many wheelchair users.
But there’s more. Important for you to know: Due to the
innovative ‘snap-on principle’ , the WheelDrive wheels
can be easily mounted, without any additional parts or
changes to the chair. Of course, the original wheels can
still be used as an alternative.
So it’s not only easy to work with WheelDrive, it can
also bring substantial cost savings. Less stock is required, and the drive wheels can easily be reused for
multiple clients in a tender market or a care facility or
rehabilitation centre.
Who can truly benefit from WheelDrive?
Manual wheelchair users who experience:
A decrease in strength
Arm pain or shoulder pain
Fluctuating energy levels during the day
Power assistance and continuous drive
Always the right level of support due to
unique dual rim concept
But also: Those who are physically fit and
simply want to go further
Intuitive and safe to use
Using a wheelchair with WheelDrive wheels feels very
natural – it’s very much like regular self-propelling. You
can easily switch the system on and off.
Determine the level of support or speed you want and
you will soon find how easy it is to switch between both
rims. The top speed is 10 km/h (assist rim) / 6 km/h
(drive rim). When driving down a slope, the motors will
brake automatically - for maximum safety and security.
34
35
Email: [email protected]
36