Heretic Ag - ECOSSE | Moto works



Heretic Ag - ECOSSE | Moto works
Heretic Ag | road racer position | silver wheels | polished engine upgrade
Heretic Ag | road racer position | black wheels | polished engine upgrade
comfort & control
Engine: BIllet aluminum; 45-degree
American V-Twin. Hand built, blueprinted and balanced. Dynamically
balanced crank for reduced vibration.
Mainframe: 4130 Chrome-moly
Weight: 460 lbs.
Subframe: 4130 Chrome-moly
Wheel base: 60.5 in.
Production number: Each engraved with sequential
production number
Swingarm: 4130 Chrome-moly
Front/Rear wheel: 17" aluminum
Color: Clear-coated carbon fiber; silver paint highlight/black
pin stripe
Displacement: 114 cu. in. (1868cc)
Front suspension: Öhlins for ECOSSE.
Upside down,
fully adjustable.
Wheel travel: 5.2" front; 6.5" rear
Wheel finish: Silver or black
Front/Rear tire: 120/70 ZR17;
190 or 200/55ZR17
Handlebar finish: Silver or black
Rear suspension: Öhlins for ECOSSE,
fully adjustable.
3 riding modes.
Instrumentation: Analog tach; LCD speedo
Front suspension: Fully adjustable
Ground clearance: 6.5 in. and up
Foot controls: 12 positions to suit any mood or body type
Rake: 25 to 29 degrees
Load capacity: 400 lbs.
Seat: Low-profile (sleek) or high-profile (plush)
Brakes: ISR dual 6-piston radial calipers,
320mm full floating/dampened disks;
260mm single 2-piston rear
Seat height: 27.5 in. to 30.5 in.
Fuel tank: Handcrafted carbon fiber/
carbon kevlar/fiberglass
matrix; 4.2 gallons
Side stand: Adjustable for riding positions
Horsepower: ~125 at rear wheel
Ft-lbs of torque: ~130 at rear wheel
Compression ratio: 10.3:1
Bore and stroke: 4 in. x 4.25 in.
Carburetion: Mikuni 42mm flat slide
Transmission: 6-speed close ratio with
final overdrive gear
Primary: Wet chain drive
Exhaust: Handcrafted by ECOSSE. 2 into 1
into 2. Stainless steel head pipes
with dual titanium mufflers.
Seat configuration: 1+1 (rider & passenger)
Rear suspension: 3 modes (dragster, cruiser, road racer)
Grips: Grey MOMO leather plus Black/grey Spider advanced
technology gel grips
Peg configuration: 12 available positions
Polished engine upgrade; BST carbon-fiber wheels
Oil capacity: 4 quarts; circulated through
Bodywork: Carbon fiber (headlight, fenders, tank,
tail, tach shroud, air filter cover &
seat pans)
ECOSSE Moto Works | | 303.246.3080