714SD Sell Sheet.ai
Transcription
714SD Sell Sheet.ai
Why we are ONE STEP AHEAD One way only breather check to prevent spills Side and bottom ribs for safer handling and no slipping Larger pressure chamber for long-lasting pressure between pumping strokes Ergonomic grip handle Long handle for easy pumping Swing back for easy storage and handling. Easy and safe handle assembly with a locking pin Powder coated metal parts for a long-lasting life Optional agitation for wettable powders features when changing the port of the recycling Machined flat seat for perfect surface Well designed cap seal Siphon system connected to diaphragm to recycle back possible leaks into the tank Big mouth with deep strainer (not shown) for faster and non-splash filling Sealed piston-diaphragm pump, interchangeable, no service required. Guaranteed for over 1.5MM strokes Reinforced, heavy-duty bushing holders Left and right handle installation with no tools Strap hooks fasten correctly and do not fall off Clip-in, long-lasting handle bushings Metal connecting rod with security nuts, hexscrews, any standard tool fits Heavy duty spray gun with filter tested worldwide Carryin handle with wand storage clips Adjustable nozzle, accepts commercial tips 16 liter/4.23 gal tank capacity Patented, ergonomic tank, UV resistant, with gallon and liter graduations Fiber reinforced vinyl hose Centrally located straps for comfort and safety Durable brass wand Adjustable, padded shoulder straps Reinforcement helps avoid tank damge Ergonomic tank design for comfortable carrying RL Flo-Master • 1000 Foreman Rd. • Lowell, MI 49331 • T: 800-748-0098 • F: 800-968-3555 PRO Model 714SD Ergonomic grip on long handle pump. Swingsback and forth for easy storage Easy handle assembly with a locking pin; no tools required. Can be installed for leftor right-handed pumping Large pressure chamber for long lasting pressure between pump strokes; big mouth with strainer faster, non-splash filing Sealed piston-diaphragm pump, interchangeable, no service required Agitator for wettable powders Die-cast metal connecting rods with security nuts, hex screws, any standard tools fit Heavy duty flow control with filter Reinforced hose Carrying handle with wand storage clips Brass adjustable and poly flat fan nozzles 4.23 gallons/16 liters tank capacity with graduation marks; patented, ergonomic design, UV resistant Long lasting, powder-coated metal parts Padded, adjustable shoulder straps with waist belt SD 819.001 Motorized Backpack Sprayer Spray lance; 27 ½” (70 cm) brass, coated with polyester finish. Double nozzle; with flat fan tips that provides constant spray for better coverage and penetration Wide tank opening with deep strainer; For a quick and easy filing. Shut-off valve: tough design for profesionales. Simple and reliable. With filter and lock for continuous aplication Tank; 25 litre, ergonomic high density polyethylene tank with UV inhibitors. Scale in US gal and litre. Pressure regulator; adjustable, 145-290 psi (10-20 bar) Pump: piston with stainless steel casing and check valve. Max. flow: 9.6 l/min. Engine: 4-cycle, air cooled Honda engine, meets US EPA/EVA and California SORE EXH/EVP regulations Litho’d in Mexico Hoses; high pressure reinforced. N° 819.001-0214 Rev.00 SPECIFICATIONS FOR MOTORIZED SPRAYER 819.001 SPECIFICATIONS FOR MOTORIZED SPRAYER 819.001 Dimensions boxed (L x A x H) Weight 16" x 17" x 28" (40 x42.5 x 70 cm.) 26.675 lbs (12.1Kg.) 25 litre Liquid tank capacity Pump Nozzle Type Piston Maximum flow 9.6 litre Working Pressure Type Flow rate Hose 290.07 362.59 psi (20-25 bar) Double with flat fan tips 0.3 US gal/min (1.16 l/min) per nozzle High pressure - 550 psi (38 bar) Type 4- cycle, air cooled Honda Continuous output Motor Maximum power Fuel Fuel tank capacity Carburetor Ignition system 25 cm3 -1 0.72 KW (10 PS) to 7,000 min (rpm) Automobile unleaded gasoline 0.13 US gal (0.5 litre) Recycling Electronic To keep in stride with progress we reserve the right to make technical changes without previous notice Nebulizer/pulverizer gun Part No.: E 300H Adjustable nozzle, complete Part No.: E803-096-C 2 head “T” nozzle Part No. : E 926-811 4 head circular nozzle Part No.: E 926-807 2 head nozzle Part No.: E 926-809 3 nozzle boom Part No. : E 926-822 4 nozzle boom Part No. : E 926-824 7 head nozzle Part No.: E 926-808 P.O. Box 56 & 92 Fax 52/474-7-42-08-56 47400 Lagos de Moreno, “ 52/474-7-42-41-85 Jalisco 52/474-7-41-22-00 Mexico “ 52/474-7-41-22-01 [email protected] Location: Calle Swissmex No. 500 Visit our website www.swissmex.com