docTHIS BOOK MUST BE READ, PRIOR TO
download 
Report Transcription
THIS BOOK MUST BE READ, PRIOR TO
This book must be read, prior to operation. SAFETY INSTRUCTIONS FOR ASSASSIN JETTERS HIGH PRESSURE WATER JETTERS & PRESSURE CLEANERS 1300 855 145 www.assassinjetters.com.au • • • • • • Assassin High Pressure Cleaners and Jetters Operating Manual PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com Page2 • • • • • • • • • • • • • • • • • Assassin High Pressure Cleaners and Jetters Operating Manual Page3 • • • • • • • • • • • • • • Assassin High Pressure Cleaners and Jetters Operating Manual Page4 • • • PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com Assassin High Pressure Cleaners and Jetters Operating Manual Page5 • • • PDF Created with deskPDF PDF Writer - Trial :: http://www.docudesk.com Assassin High Pressure Cleaners and Jetters Operating Manual Page6 • • • Assassin High Pressure and PDF Jetters Operating Manual PDF Created Cleaners with deskPDF Writer - Trial :: http://www.docudesk.com Page7 Assassin High Pressure Cleaners and Jetters Operating Manual Page8 Assassin High Pressure Cleaners and Jetters Operating Manual Page9 Assassin High Pressure Cleaners and Jetters Operating Manual Page10 Assassin High Pressure Cleaners and Jetters Operating Manual Page11 Assassin High Pressure Cleaners and Jetters Operating Manual Page12 Assassin High Pressure Cleaners and Jetters Operating Manual Page13 Assassin High Pressure Cleaners and Jetters Operating Manual Page14 Assassin High Pressure Cleaners and Jetters Operating Manual Page15 Assassin High Pressure Cleaners and Jetters Operating Manual Page16 Assassin High Pressure Cleaners and Jetters Operating Manual Page17 Assassin High Pressure Cleaners and Jetters Operating Manual Page18 Assassin High Pressure Cleaners and Jetters Operating Manual Page19 Assassin High Pressure Cleaners and Jetters Operating Manual Page20 Assassin High Pressure Cleaners and Jetters Operating Manual Page21 2010 GENERAL ORDER FORM P1 NAME ________________________________ ADDRESS _______________________________________ SUBURB ________________________P/Code ________ PHONE ________________ M ________________________ C/C # ______ ______ ______ ______ EXP ________ Name on Card______________________ SEC# ______ Signature_________________________Date _________ ADDRESS PHONE EMAIL 2/232 Manns Rd, West Gosford 2250 1300 855 145 [email protected] www.assassinjetters.com.au GENERAL NOZZLE RANGE Bandit nozzle The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust Recommend using a speed cone with this nozzle 6 rear jets at a tight angle and one front jet. $126+ 3 large rear jets and 1 forward jet $119+ Predator invader nozzle P6R1F Great penetrating thruster 6 rear jets, 1 forward jet beaver nozzle The Beaver nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzle and 6 rear jets to quickly thrust the nozzle to the blockage. Has reduced thrust due to 2 front jets. Root rat nozzle This is a popular nozzle because of it’s jet configuration. 1 forward, 3 behind the nose at 45 deg and 3 at the rear at 30 deg. It will open a blockage quickly and thoroughly. P3R1F Predator penetrator nozzle BT6R1F BV6R2F $132+ $123+ P6R Predator thruster nozzle The Predator - 1/4” BSP Good general penetrating nozzle with pointed nose $121+ 6 rear thrusting jets only N3R1F Negotiator penetrator nozzle RR6R1F $114+ 3 large rear jets and 1 forward jet $134+ N6R1F Negotiator invader nozzle ferret Nozzle The Ferret nozzle has 2 offset forward facing jets that help penetrate at the front of the nozzle, 3 rear jets on the side and 3 jets at the back of the nozzle. Has reduced thrust due to 2 front jets. Screwdriver nozzle The New Screwdriver nozzle features a blade at the front of the nozzle with an offset jet so you can clear most stubborn blockages just by twisting the hose. Also has 6 rear thrusting jets. Great penetrating thruster 6 rear jets, 1 forward jet F6R2F $132+ $118+ N6R Negotiator thruster nozzle The Negotiator - 1/4” BSP Negotiates itself around tight traps and bends $116+ 6 rear thrusting jets only C3R1F Compressor penetrator nozzle SD6R1F $88+ 3 large rear jets and 1 forward jet $126+ C6R1F Compressor invader nozzle Grease Ball The New Grease Ball nozzle is totally spherical with 8 rear thrusting jets only. Designed for extreme thrust and the ability to clean grease off the sidewall of pipes but has proven to be great on root chokes. Bullet nozzle This is a great nozzle for penetrating tight blockages because the nozzle is forward of the cone helping it to burrow deep into the choke. 3 Compressor tips available. cONE & TAIL - 1/4” Great penetrating thruster 6 rear jets, 1 forward jet GB8 $120+ B6R1FC $166+ The Compressor - 1/8” BSP Used for tight access drains, whip hoses and the Bullet adaptor $92 C6R Compressor thruster nozzle $90+ 6 rear thrusting jets only Stainless steel quick release QR8SS 1/4” with Patented double silt proof o’ring $64+ CONE & tail - 1/8” CT8 CT4 $46+ $46+ Brass quick release QR8BR 1/4” with Patented double silt proof o’ring $39+ Buy together and save! hose tail - 1/4” pvc wear cone - 1/4” hose tail - 1/8” HT8 $27+ Quick release connectors with alan key broach HT4 $27+ pvc wear cone - 1/8” PC8 $19+ PC4 $19+ PVC wear cone - 1/4” and 1/8” SALES - ENQUIRIES - 1300 855 145 Assassin High Pressure Cleaners and Jetters Operating Manual Page22 2010 GENERAL ORDER FORM P2 www.assassinjetters.com.au ACCESSORIES AND HOSES 1/8“ Male connector Quick release to compressor nozzles (With alan key broach - for 1/8” Nozzles) 1/8“ female connector Quick release to 1/8” male fittings 1/4“ male connector Quick release to 1/4” nozzles (With alan key broach - for 1/4” Nozzles) 1/4“ female connector Quick release to 1/4” male fittings 1/4“ Male connector - Short Quick release to 1/4” female fittings 1/4“ Stubbie tail Quick release for Root Ranger only (With alan key broach) 3/8“ male connector Quick release to 3/8” nozzles (With alan key broach) 1/4“ x 1/8” Compressor adaptor Used to join the Compressor nozzle to the end of the 1/4” male hose tail 1/8” Bullet blank Used to join the Compressor nozzle to the quick release adaptor HT4M $27+ Used to extend the length of the nozzles to prevent them turning around in pipe HT4F $27+ Suit 1/8” male tail behind nozzle protecting the quick release coupler 1/4“ SS wear cone Suit 1/4” male tail behind nozzle protecting the quick release coupler Sonde Adaptor 6 rear jets thrust the Ridgid Sonde down the drain for quick pipe location Sonde Adaptor Complete SAC $211+ Ridgid battery Sonde Ridgid Battery Sonde used with the Sonde Adaptor The Blade Cutter Complete This SS blade adapts onto the Root Ranger so you can feel if the drain has been cleaned tIP cLEANER WITH cAPSULE Save money - Buy a box! 15 Piece Nozzle box HT8M $27+ Replacement Pressure gauge 10,000psi HT8F PG Suit all pumps and reels up to 10,000psi Comes with built in spike arrestor $45+ 1/8“ Hose Tail Swage HR4 $27+ For repairing 1/8” Synflex, Mustang and Armadillo Water Jetter hose - short HT8MS $18+ $27+ 3/16“ Hose Tail Short Swage $27+ HR8S For repairing 1/4” Synflex, Mustang and Armadillo Water Jetter hose - short $31+ $20+ 1/4“ Turbine Extension CA8 SSE $38+ This extension prevents the turbine from turning around inside a 6” drain $30+ Small High Pressure hose reel BA4 $74+ Fixed bracket - Carries: 40m 3/8” Jet Hose 50m 1/4” Jet Hose 60m 3/16” Jet Hose 40M ½”Garden Hose 30M 3/4” Garden Hose CE4 $180ea+ PW-134 $390+ hose reel 4416 PC4SS Separate bracket - Carries: 40m 3/8” Jet Hose 50m 1/4” Jet Hose 60m 3/16” Jet Hose 40M ½”Garden Hose 30M 3/4” Garden Hose $29+ $550+ bracket 4416 optional SS shortened bracket available - $158+ PC8SS $29+ SA $20+ 1/4“ Hose Tail short Swage HT12M $165+ HR6S For repairing 3/16” Synflex, Mustang and Armadillo Water Jetter hose - Short HT8MSF $99+ BUILT TO BLAST RBS $620+ built toblast BCC $175+ How do you make jetting hose last longer? ..... Buy Stinger 5000 Jetting Hose! TC Sewer and storm water jetting hose. Long lasting hose specially formulated for jetting PVC & VCP pipe. Outlasts all others. For cleaning all Mustang Nozzles $19+ Ball valve handle SS EHCSS Heavy duty cast stainless handle makes any ball valve easier and safer to use MNBKD $1490+ Mustang Nozzles deluxe Box Large High Pressure hose reel 1/8“ SS wear cone $860+ Save money - Buy a box! 7 Piece Nozzle box (With alan key broach) 100/150/350mm SS Nozzle Extensions MNBKB Mustang Nozzles Budget Box $38+ 60m x3/8” ST3/8 $840+ 65m x ¼” ST1/4 $780+ 55m x 3/16” ST3/16 $660+ 15mx1/8” ST1/8 $200+ (including desired tail) SALES - ENQUIRIES - 1300 855 145 Assassin High Pressure Cleaners and Jetters Operating Manual Page23 2010 GENERAL ORDER FORM P3 www.assassinjetters.com.au ROOT CUTTERS & LARGE NOZZLE RANGE Root ranger complete RR8TC Root cutting turbine with removable front plug and quick connect adaptor $320+ Double barrel Root ranger Twin Root cutting turbines with quick connect adaptor Root ranger extension Prevents the Nozzle from turning up inspection caps Replacement turbine Suit Root Ranger. Can also be used on the end of hand lances Bandit nozzle 3/8” Bandit nozzle ½” RRDB $525+ WGS25 $39+ 180 Degree pressure bend SS8TM With front plug only suit Root Ranger $171+ Root Ranger Repair Kit RTRK8 Replacement ceramic insert $108+ $138+ BT6R1F12 The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust 6 rear jets at a tight angle and one front jet. screwdriver nozzle 3/8” $168+ SD6R1F10 The New Screwdriver nozzle features a blade at the front of the nozzle with an offset jet so you can clear most stubborn blockages just by twisting the hose. Also has 6 rear thrusting jets. T83055 $149+ BT6R1F10 The Bandit nozzle has been computer designed to enter a blockage quickly with maximum thrust 6 rear jets at a tight angle and one front jet. screwdriver nozzle ½” $140+ SD6R1F12 The New Screwdriver nozzle features a blade at the front of the nozzle with an offset jet so you can clear most stubborn blockages just by twisting the hose. Also has 6 rear thrusting jets. $170+ WARTHOG ROOT CUTTERS WT 10 warthog WT 3/8” Spinning root cutter 4000 PSI 20-48 LPM Pressure and Flow Dependant $798+ *Price may vary depending on the $US Root Ranger Front jet Removable front ceramic jet with flow straightener in body Large Root ranger ½” Root cutting turbine M6J $36+ SEWER SHAFT CLEANING SET LRR8TC $495+ Adaptor available to quick connect or screw into 1/4” hose. Flow rate from 21 LPM to 90 LPM. 180 Degree pressure bend LSS8TM Suit Large Root Ranger $245+ Replacement turbine Suit Large Root Ranger. Can also be used on the end of hand lances WH 12 $490+ Used to clear tree roots from within sewer shafts and boundary traps. Comes complete with a reversed 45 degree turbine to enable you to clear roots within a 45 degree junction within vertical shaft. Also comes with a 90 degree extension and a straight extension. 1 turbine included. LT83055 $249+ *Price may vary depending on the $US SALES - ENQUIRIES - 1300 855 145 Assassin High Pressure Cleaners and Jetters Operating Manual Page24
Similar documents
MN Order Form 2 - The Jetters Edge
1/4“ Male connector - Short
Quick release to 1/4” female fittings
