Price and Technical Guide

Transcription

Price and Technical Guide
Showering & Bathing Range
126 Churchill Road
Bicester
Oxfordshire
OX26 4XD
Tel: 01869 365500 Fax: 01869 365588
Email: [email protected]
Web: www.chilterninvadex.co.uk
Issue 15
CONTENTS
P3-110
SHOWERING AND BATHING PRODUCT RANGE
P3-6
Selecting the appropriate showering solution
P7-27
Shower cubicle range
P18-25
P26-27
P4
P5
P6
Shower cubicles
Shower trays
Shower tray waste
P8-9
Shower cubicle selector
P10-15 Shower cubicle range & order codes
P16-17 Shower cubicle seat range
Shower toilet cubicle range
P18-19 Shower toilet cubicle selector
P20-25 Shower toilet cubicle range & order codes
Shower cubicle extras
P26
P27
P29 Wet floor selector
P30-31 General information
P31
Portascreen
P32-35 Enclosure options & order codes
P36-42 Wet floor waste options
P44-45 Tray selector
P46-53 Specification guide & technical Information
P54
Special enclosures (made to measure)
P55-56 General Information
P57-66 Enclosure options & order codes
P67
Curtain rails & curtains
P68
Shower units & Portascreen
P70-80 Impressions collection & order codes
P81-92 Shower tray waste options
P28-35
P43-94
Shower units
Macerator
Wet floor systems
Level & easy access shower trays
P93-94
Wet floor drains & pumps
P95-101
Shower seats & grab rails
P102-105Baths
P106-110 Automatic toilet & toilet seating
P112-136 SHOWERING AND BATHING EQUIPMENT
P112-123
P124-125
Shower chairs
P112-115 Transaqua
P116-121 Aquamaster
P122-123 Tilt in space chair
Shower cradles
P124
P125
P126
Shower trolleys
P127-128 Shower/changing stretchers
P129-130 Height adjustable shower/changing benches
P132-133 Shower chair
P134
Tilt in space cradle
P135 In bath cradle
P136
Shower trolley
P126-130
P131-136
Tilt in space cradle
Washington cradle
Shower trolleys & stretchers
Paediatric range
P137-140INDEX
P141
P142
General Information
Terms and conditions of sale
SYMBOLS: Bulk item
Made to order
Anti-microbial coating
(see P141 for details)
Tel: 01869 365500
Fax: 01869 365588
[email protected]
1
SYMBOLS: Bulk item
2
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SELECTING THE APPROPRIATE SHOWERING SOLUTION
Chiltern Invadex can supply a showering solution to suit almost any requirement. Ranges
include pumped and gravity waste options to suit timber and concrete substructures. Designed with ease of installation in mind, they can be purchased and installed by any
competent person*.
Our expertly designed range of equipment consists of;
Shower Cubicles
Our shower cubicles provide a stand alone unit which can provide en-suite showering and/
or toileting facilities in a large range of environments. It is particulary suited to adaptations
converting ground level living accomodation to provide en-suite sleeping facilities.
Cubicles can be surface mounted and used with a removable ramp or recessed into the
floor providing level access.
Refer to page 7 for the Shower Cubicle Selector Guide or page 18 for Shower Loo Cubicle
Selector.
Easidec Wet Floor System
The Easidec range of trays are installed below a suitable non-slip floor covering to provide
a completely level access bathing solution. Wet floor trays can be used independently or with a range of shower enclosure options.
Refer to page 28 for the Wet Floor Tray Selector Guide
Shower Trays
Our range of shower trays includes both recessed and surface mounted options providing
level or easy access.
Refer to page 43 for Shower Tray Selector Guide
Shower Seats
A large range of shower seats is available which can be used for transfers or to assist ambulant users who are unable to stand for long periods. Shower seats can be provided
to suit any of the above showering solutions**. Refer to page 16 (shower cubicles) or page
95 (shower trays) for details.
Installation
We are able to provide a full bathroom adaptation service. Should an installation quotation
be required, please call customer services on 01869 36550 opt 1, to arrange for a free of
charge, no obligation site feasibilty survey.
*subject to compliance with any regulatory requirements (eg electrical works).
**excluding shower WC cubicles.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
3
SHOWER CUBICLES
Shower cubicles are semi-permanent units fitted with a roof, which are free-standing. Shower
cubicles are self contained and therefore no tiling is required. Normally installed within 1-2 days,
no floor excavation (other than to connect gravity waste versions) is required and a ramp is
provided. Removable for recycling.
Front Entry Shower cubicles
Shower chair accessible Front Entry models (except 75 model)
Gravity or pumped waste options
Provided with ramp (cubicle can be recessed into floor as per photo)
Shower Toilet model available - combines a toileting facility with a shower
(includes toilet and hand basin)
Grab rails fitted as standard
Trifold and single alcove door options
Shower seat option
Light/extractor fan option
Half height side panel option
100MK2 shown
Side Entry Shower cubicles
Suitable for side transfer (not wheelchair accessible)
Gravity or pumped waste options
Provided with ramp
Shower Toilet model available - combines a toileting facility with a shower (includes toilet and hand basin)
Grab rails fitted as standard
Trifold and single alcove door options
Shower seat option
Light/extractor fan option
Half height side panel option
Shower Chair Access Required?
No
Yes
Front Entry
Range
Front Entry
Range
Product
Size Page
100MK2
1037 x 960
8
Model 101 1030 x 1010mm 8
Model 120 1215 x 895mm
8
Refer
to shower chair compatibility
chart on page page 95 for full details
SYMBOLS: Bulk item
4
Made to order
Product
Model 75
Tel: 01869 365500
Size
915 x 780mm
Side Entry Range
Page
8
Product
Size
Page
Side Entry Mk2 1205 x 760mm 9
Slimline SE
900 x 730mm 9
Fax: 01869 365588
[email protected]
SHOWER TRAYS
TRUE LEVEL ACCESS
Shower trays and wet floor trays are permanent units which require tiling or similar installation.
0mm THRESHOLD
True level access showering area
Installed under the floor and covered with vinyl flooring to create a whole floor showering area
Ideal for wheeled shower chair or walk-in users
Choice of door and enclosure options
Gravity or pumped waste options to suit site conditions
Ice white enclosure
Certain models comply with DDA requirements
Floor excavation required
EasiDec shown
LEVEL ACCESS
15mm THRESHOLD
Level access shower trays
Level access shower tray for installation on most concrete or wooden floors
with 15mm threshold
Ice white (or contemporary brushed aluminium enclosure with safety glass - Impressions Collection see pages 71-76)
Floor excavation required
Sandwell shown
EASY ACCESS
True Level access EasiDec Wet floor trays
30-80mm THRESHOLD
Easy access shower trays
Easy access shower trays sit on the floor surface without the need to remove the floor
with 30-80mm threshold
Ice white (or contemporary brushed aluminium enclosure with safety glass - Impressions Collection see pages 77-80)
Certain models require excavation for waste
Abbeydale shown
Shower Chair Access Required?
Yes
True Level Access
Wet Floor
Product
Size EasiDec 1 1300 x 800mm
EasiDec 2 1000 x 1000mm
EasiDec 5* 800 x 800mm
Level Access
Shower Tray
Page
29
29
29
29
29
29
29
Product
Sandwell 655
Sandwell 760 Westdale 655 Westdale 760
Westdale 1000
Cardale MK2
Size Page
1850 x 715mm 44
1850 x 820mm 44
1165 x 720mm 44
1165 x 825mm 44
1065 x 1065mm 44
1340 x 795mm 44
No
Easy Access
Shower Tray
Product
Edale Size
Page
1110 x 820mm 45
Product
Dovedale Size
Page
1135 x 700mm 45
Impressions Collection
D640 model
1135 x 700mm
S655 model
1850 x 720mm
S760 model
1850 x 820mm
W655 model 1165 x 720mm
W760 model 1165 x 825mm
77
73
75
71
72
*Subject to door specification
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
5
SHOWER TRAYS
Shower Tray Waste Options
Use the key at the foot of the page and follow the page links for comprehensive details
Tray Type
1
Floor type
2 Installation
method
Waste option
3
Wooden
Concrete Concrete Recess Surface Gravity joists
& screed (no screed) into
mounted waste
& boards floor
(Use the key below)
Shower Waste Pump Kit
Whale
pump Typical Typical
system timberconc/screed
floor floor
True
Level
EasiDec wet floor 

x
 x
G3
P1.1 N/A
P1
Level Access
Sandwell MK3 655 

x

x
P1.1 P2
G1 G1.1 P1
Sandwell MK3 760 

x

x
P1.1 P2
G1 G1.1 P1
Westdale 655


x

x
P1.1 P2
G1 G1.1 P1
Westdale 760


x

x
P1.1 P2
G1 G1.1 P1
Westdale 850


x

x
P1.1 P2
G1 G1.1 P1
Westdale 1000


x

x
P1.1 P2
G1 G1.1 P1
Cardale MK2

 x

x
N/A
N/A
N/A
Easy Access
Dovedale MK2


 x

G2
x
P2
Edale MK2



x

x
P2
G2
GRAVITY WASTE OPTIONS
N/A
x
x
x
x
x
x
x
N/A
x
x
x
x
x
x
P3
x
x
P2
P2
PUMPED WASTE OPTIONS
Gravity waste
(Invawaste)
Whale Shower Drain
Pump Kit
See pages 82-84 for
comprehensive details
and Westdale shower trays)
(to suit Easidec wet sloor trays, Sandwell
G1
Integral above floor waste
outlet
G2
See page 84 for comprehensive
details
Wet floor Gravity waste
(included with Easidec trays)
G3
details
G1.1
See pages 39-42 for
P1
Shower Waste Pump Kit
P1.1
P2
See page 90-91 for comprehensive
details
NOT suitable for below tray drainage on concrete floors
Integral shower tray pump
(Cardale only)
P3
details
KEY
SYMBOLS: Bulk item
6
Made to order
Tel: 01869 365500
Shower
tray
Integral
pump
Fax: 01869 365588
[email protected]
SYMBOLS: Bulk item
Made to order
SHOWER CUBICLE RANGE
Tel: 01869 365500
Fax: 01869 365588
[email protected]
7
SHOWER CUBICLE SELECTOR -FRONT ENTRY CUBICLES
Use this shower tray selector to choose the cubicle base size required.
FRONT ENTRY 100MK2 SHOWER CUBICLE Standard doors
See page 10 for technical information and details of How to order
Tri-fold doors
Ramp size
790mm Width x 280mm Depth
FRONT ENTRY SHOWER CUBICLE - MODEL 75
Standard doors
Tri-fold doors
Ramp size
FRONT ENTRY SHOWER CUBICLE - MODEL101
Standard doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Tri-fold doors
Ramp size
FRONT ENTRY SHOWER CUBICLE - MODEL120
Standard doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Note:
Left hand trifold
illustrated. Right
hand version
available.
Tri-fold doors
Ramp size
Note:
Left hand trifold
illustrated. Right
hand version
available.
Notes:
1. Add 50mm at rear of cubicle to allow for waste hose - pumped waste version
2. Add 100mm to width to allow for shower unit services
3. Allow as much space as possible to gain access to services for routine maintenance
SYMBOLS: Bulk item
8
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER CUBICLE SELECTOR - SIDE ENTRY CUBICLES
SIDE ENTRY MK2 SHOWER CUBICLE
Standard doors
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
SLIMLINE SIDE ENTRY SHOWER CUBICLE
Standard doors
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
Notes:
1. Add 50mm at rear of cubicle to allow for waste hose - pumped waste version
3. Allow as much space as possible to gain access to services for routine maintenance
Shower cubicles are available with a large range of options and accessories, allowing the cubicle to be configured to suit specific client requirements. A quick order
form is available to help select the appropriate options. Please contact Customer Service for details or to arrange a visit by a Technical Sales Representative.
SHOWER CHAIR CUBICLE COMPATIBILITY
CUBICLE MODEL
AQUAMASTER SHOWER CHAIR MODEL
TRANSAQUA SHOWER CHAIR MODEL
A02
TA21AP TA18SP TA21SP TA18SP TA21SP
LWB
LWB
A06
A08
A11
TIS TA18AP
FRONT ENTRY
Model 75
Model 101
Model 120











^






















































Model 100MK2
SIDE ENTRY
Side Entry MK2
Slimline Side Entry MK2
^ 21” Model - standard door option only
LWB= Long wheel base
See page 16 for shower seat/bench compatibility
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
9
FRONT ENTRY SHOWER CUBICLE 100MK2
HOW TO
ORDER
Cubicle kit contents:

White shower tray with ramp

Full height enclosure pack (half height carer assist panels available on request)
Door set - half height or tri-fold doors
Curtain Track and Hooks
Extras
White Shower Curtain
Shower seats shown on p16
Grab rails
Shower unit shown on p26

Fitting instructions
Macerator shown on p27
Option 1
Cubicle description Half height door
100MK2 Cubicle with pumped waste
Part no: SHCU100PW
Price: £1590 100MK2 with gravity waste
Part no: SHCU100G
Price: £1350
Option 2
Option 3
Trifold (Left hand) Trifold (Right hand) Part no: SHCU100PW Part no: SHCU100PW
Price: £1590 Price: £1590 Part no: SHCU100G
Price: £1350
Part no: SHCU100G
Price: £1350
Technical information
Ref
Dimensions
A2015
B
960*
C1037
D280
H
E810
F45
G790
H50
*Add 100mm if side controls fitted.
Standard doors
Tri-fold doors
Notes: Dimensions are for doors fully open.
Internal dimensions: The width is measured from acrylic panel to acrylic panel.
The depth is taken from the back acrylic panel to the inner face of the door.
SYMBOLS: Bulk item
10
Made to order
Tel: 01869 365500
Shower chair compatibility
See page 9 for shower chair compatibility options
Fax: 01869 365588
[email protected]
FRONT ENTRY SHOWER CUBICLE MODEL 75
HOW TO
ORDER


Extras
Grab rails

Option 1
75 Cubicle with pumped waste
Part no: SHCU75PW
Price: £1590 75 with gravity waste Part no: SHCU75G
Price: £1350
Option 2
Option 3
Trifold (Left hand) Trifold (Right hand) Part no: SHCU75PW
Price: £1590 Part no: SHCU75PW
Price: £1590
Part no: SHCU75G
Price: £1350
Part no: SHCU75G
Price: £1350
Ref
Dimensions
A1900
B
780*
C930
D220
G
E810
F70
G50
H775
Standard doors
Tri-fold doors
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
11


Extras
Grab rails

HOW TO
ORDER
Option 1
Part no: SHCU101PW
Price: £1590
101 Cubicle with gravity waste
Part no: SHCU101G
Price: £1350
Option 2
Option 3
Price: £1590
Price: £1590
Part no: SHCU101G
Price: £1350
Part no: SHCU101G
Price: £1350
Ref
Dimensions
A1900
B
1010*
C1030
D430
G
E810
F70
G50
H1000
*Add 100mm if side controls
fitted.
Standard doors
Tri-fold doors
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
12
Fax: 01869 365588
[email protected]


Extras
Grab rails

HOW TO
ORDER
Option 1
Part no: SHCU120PW
Price: £1725
120 Cubicle with gravity waste
Part no: SHCU120G
Price: £1470
Option 2
Option 3
Price: £1725
Price: £1725
Part no: SHCU120G
Price: £1470
Part no: SHCU120G
Price: £1470
Ref
Dimensions
A1900
B
895*
C1215
D220
G
E810
F73
G50
H890
*Add100mm if side controls fitted.
Tri-fold doors
Standard doors
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
13
SIDE ENTRY MK2 SHOWER CUBICLE


Extras
Grab rails

HOW TO
ORDER
Option 1
Option 3
Option 2
Trifold (Left hand) Trifold (Right hand) Side Entry MK2 Cubicle with pumped waste Pt no: SHCUSEMK2PW Pt no: SHCUSEMK2PW Pt no: SHCUSEMK2PW
Price: £1590
Price: £1590
Price: £1590
Side Entry MK2 Cubicle with gravity waste Pt no: SHCUSEMK2G Pt no: SHCUSEMK2G Pt no: SHCUSEMK2G
Price: £1350
Price: £1350
Price: £1350
Standard doors
14
Made to order
Dimensions
A
2040
B
1950
C
1205
D
760
E
250
F
1025
G
60
H
810
Tri-fold doors
SYMBOLS: Bulk item
Ref
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SLIMLINE SIDE ENTRY SHOWER CUBICLE


Extras
Grab rails

HOW TO
ORDER
Option 2
Option 1
Option 3
Trifold (Left hand) Trifold (Right hand) Slimline Side Entry with pumped waste
Part no: SHCUSLSEPW Part no: SHCUSLSEPW Part no: SHCUSLSEPW
Price: £1590
Price: £1590
Price: £1590
Slimline Side Entry with gravity waste
Part no: SHCUSLSEG Part no: SHCUSLSEG
Part no: SHCUSLSEG
Price: £1350
Price: £1350
Price: £1350
Ref
Dimensions
A1830
B
900
C730
D220
G
E810
F55
G50
H900
Standard doors
Tri-fold doors
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
15
CUBICLE SEATS
Shower seats for cubicles
have a maximum load
127kg (20 stones) (279lb)
FRONT ENTRY
100MK2
FRONT ENTRY
75,101,120
SLIMLINE
SIDE ENTRY
SIDE ENTRY MK1
Padded bench
seat, with or without
aperture (does not
fold away)
code: SHSS3100
£210.00
Padded bench
aperture (does not
fold away)
code: SHSS375/
SHSS3101/
SHSS3120
£210.00
Padded bench
aperture (does not fold
away)
code: SHSS2SL
£180.00
Padded bench
aperture (does not
fold away)
Side Entry Mk1
code: SHSS2SE
£180.00
SIDE ENTRY MK2
Tip-up PVC
Shower Seat, with
Adjustable Folding
Support Legs
code:
SHSS4SEMK2
£158.00
Tip-up Padded
Seat, with
adjustable folding
support legs
code:
SHSS4PSEMK2
£237.00
Tip-up Padded Seat,
with adjustable
folding support legs
code: SHSS4P100
£237.00
Tip-up PVC shower
seat, with folding
legs/ arms/fixed
backrest
code:
SHSS5SEMK2
£232.00
Tip-up PVC shower
seat, with folding
legs/arms/fixed
backrest
code: SHSS5100
£232.00
Tip-up shower seat,
with flat padded
seat with folding legs/arms,
fixed backrest
code:
SHSS5PSE2FP £333.00
Tip-up shower
seat, with flat
padded seat with folding legs/arms,
fixed backrest
code: SHSS5P100
£333.00
SYMBOLS: Bulk item
16
Tip-up PVC shower
seat, with adjustable
code: SHSS4100
£158.00
Made to order
Tip-up PVC shower
seat, with adjustable
code: SHSS475/
SHSS4101/
SHSS4120 £158.00
Tip-up Padded seat,
with adjustable
code: SHSS4P75/
SHSS4P101/
SHSS4P120
£237.00
Tip-up PVC shower
seat, with folding
legs/arms, fixed
backrest
code: SHSS575/
SHSS5101/SHSS5120
£232.00
Tip-up shower seat,
with flat padded
seat with folding
legs/arms/ fixed
backrest
code: SHSS5P75/
SHSS5P101/
SHSS5P120
£333.00
Tel: 01869 365500
Tip-up PVC
shower seat, with
adjustable folding
support legs
code: SHSS4S/L
£158.00
Tip-up PVC
shower seat, with
adjustable folding
support legs
code: SHSS4SE
£158.00
Tip-up Padded seat,
with adjustable folding
support legs
code: SHSS4PS/L
£237.00
Tip-up Padded
seat, with
adjustable folding
support legs
code: SHSS4PSE
£237.00
Tip-up PVC shower
seat, with folding legs
& arms, fixed backrest
code: SHSS5S/L £232.00
Tip-up PVC shower
seat with folding
legs/arms/ fixed
backrest
code: SHSS5SE
£232.00
Tip-up shower seat
with flat padded seat
with folding legs &
arms, fixed backrest
code: SHSS5PS/E
£333.00
Tip-up shower seat,
with flat padded seat
with folding legs/arms/
fixed backrest
code: SHSS5PS/E
£333.00 Fax: 01869 365588
[email protected]
CUBICLE SEATS
Shower Cubicle Seats - Information for ordering
Chiltern Invadex produce a wide range of seats for use with the Shower Cubicle range. Basic size information is
shown below. Specialist seats can be made to order (extended delivery times apply).
STANDARD SEAT OPTION
Flat padded (one size)
See previous page for part no
SPECIAL ORDER SEAT OPTIONS (padded seats only, additional cost applies)
HORSESHOE SEAT
Horseshoe seats available to special order
Large
Code LH/S
Medium
Code MH/S
APERTURE SEAT
Aperture seats available to special order
Large
Code LAPP
Medium
Code MAPP
Small
Code SH/S
Small
Code SAPP
Budget Cubicle Seat Range
Suitable for use in all shower cubicles. Please state cubicle model when ordering.
 127kg (20 stone) weight limit
 Available with or without backrest and arms
 Folds up against the wall when not in use
code IDVB634 IDVB535 SYMBOLS: Bulk item
Made to order
product
Seat with legs
Seat with legs, armests & back Tel: 01869 365500
price £99
£210
Fax: 01869 365588
[email protected]
17
SYMBOLS: Bulk item
18
Made to order
Tel: 01869 365500
Fax: 01869 365588
SHOWER TOILET
CUBICLE RANGE
[email protected]
SHOWER CUBICLE SELECTOR -FRONT ENTRY TOILET CUBICLES
FRONT ENTRY 100MK2 SHOWER TOILET CUBICLE
Standard doors
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
FRONT ENTRY SHOWER TOILET CUBICLE - MODEL 75
Standard doors
See page 21 for technical information
and details of How to order
and details of How to order
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
FRONT ENTRY SHOWER TOILET CUBICLE - MODEL101
FRONT ENTRY
MODEL101
and details
of How to order TOILET
Standard doors
Tri-fold doors
Ramp size
Note:
Left hand trifold
illustrated. Right
hand version
available.
FRONT ENTRY SHOWER TOILET CUBICLE - MODEL120
FRONT ENTRY
MODEL120
and details
of How to order TOILET
Standard doors
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
Notes: 1. Add 50mm at rear of cubicle to allow for waste hose - pumped waste
3. Allow as much space as possible to gain access to services for routine maintenance.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
19
SHOWER CUBICLE SELECTOR - SIDE ENTRY TOILET CUBICLES
SIDE ENTRY MK2 SHOWER TOILET CUBICLE
See page 25 for technical information and
details of How to order
Standard doors
Tri-fold doors
Note:
Left hand trifold
illustrated. Right
hand version
available.
Ramp size
Notes: 1. Add 50mm at rear of cubicle to allow for waste hose - pumped waste
3. Allow as much space as possible to gain access to services for routine maintenance.
SHOWER CHAIR CUBICLE TOILET COMPATIBILITY
AQUAMASTER SHOWER CHAIR MODEL
CUBICLE MODEL
A02
A06
A08
TRANSAQUA SHOWER CHAIR MODEL
A11 TIS
TA18AP TA21AP TA18SP TA21SP TA18SP TA21SP
LWB
LWB
FRONT ENTRY











^
































Side Entry MK2











Slimline Side Entry MK2
No Shower cubicle toilet option Model 75
Model 101
Model 120
Model 100MK2
SIDE ENTRY
^ 21” Model - standard door option only
LWB= Long wheel base
Note: All Shower Cubicle Toilet models are unsuitable for fold-up shower seat/bench seat/stool compatibility
SYMBOLS: Bulk item
20
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
FRONT ENTRY SHOWER CUBICLE TOILET 100MK2


WC pan and cistern
Plastic basin (fillable via shower hose)
Extras
Ceramic basin & lever taps shown on p26
Curtain track, hooks & white shower curtain
2x Grab rails

HOW TO
ORDER
Option 1
Option 3
Option 2
Trifold (Left hand) 100MK2 Cubicle Toilet with pumped waste Part no: SHTCU100PWPart no: SHTCU100PW
Price: £2280
Price: £2280 100MK2 Cubicle Toilet with gravity waste
Part no: SHTCU100G Part no: SHTCU100G
Price: £2050
Price: £2050
Trifold (Right hand) Part no: SHTCU100PW
Price: £2280 Part no: SHTCU100G
Price: £2050
j
Cistern
Outlet pipe
H
Ref
Dimensions
A
2015
B
960 +
C
1037
D
280
200
E
810
*+
F
45
G
790
780
H
50
J
200
+Add 75mm if basin fitted.
Standard doors
Tri-fold doors
600
580
Note:
435 395
180
centreline of waste is taken
from top of cubicle base
470
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
21
FRONT ENTRY MODEL 75 SHOWER CUBICLE TOILET


Extras
2x Grab rails

HOW TO
ORDER
Option 1
Part no: SHTCU75PW
Price: £2280
75 with gravity waste Part no: SHTCU75G
Price: £2050
Option 2
Option 3
Trifold (Left hand) Trifold (Right hand) Part no: SHTCU75PW Part no: SHTCU75PW
Price: £2280
Price: £2280
Part no: SHTCU75G
Price: £2050
Part no: SHTCU75G
Price: £2050
Ref
H
Dimensions
A1900
Cistern
B
780*
C930
Outlet pipe
G
D215
E810
F70
G50
H200
J775
Standard doors
Tri-fold doors
600
580
Note:
435 395
180
centreline of waste is taken from
top of cubicle base
470
SYMBOLS: Bulk item
22
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]


Extras
2x Grab rails

HOW TO
ORDER
Option 1
Option 3
Option 2
Trifold (Left hand) 101 Cubicle Toilet with pumped waste
Part no: SHTCU101PWPart no: SHTCU101PW
Price: £2280
Price: £2280
101 Cubicle Toilet with gravity waste
Price: £2050
Price: £2050
Price: £2280
Part no: SHTCU101G
Price: £2050
Ref
Dimensions
A1900
H
B
Cistern
1010*+
C1030
D430
Outlet pipe
G
E810
F70
G50
H200
J1000
Standard doors
Tri-fold doors
600
580
Note:
435 395
180
top of cubicle base
470
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
23


Extras
2x Grab rails

HOW TO
ORDER
Option 1
Option 3
Option 2
Trifold (Left hand) 120 Cubicle Toilet with pumped waste
Part no: SHTCU120PWPart no: SHTCU120PW
Price: £2400
Price: £2400
120 Cubicle Toilet with gravity waste
Price: £2170
Price: £2170
Price: £2400
Part no: SHTCU120G
Price: £2170
Ref
Dimensions
A1900
H
Cistern
B
895*+
C1215
D220
Outlet pipe
G
E810
F75
G50
H200
J890
Notes:
Standard doors
Tri-fold doors
600
580
435 395
180
Note:
top of cubicle base
470
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
24
Fax: 01869 365588
[email protected]
SIDE ENTRY MK2 SHOWER CUBICLE TOILET


Extras
2x Grab rails

HOW TO
ORDER
Option 1
Option 2
Option 3
Cubicle description Half height door Trifold (Left hand) Trifold (Right hand) Side Entry MK2 Cubicle with pumped waste Part no: SHTCUSE2PW Part no: SHTCUSE2PW Part no: SHTCUSE2PW
Price: £2280
Price: ££2280
Price: £2280
Side Entry MK2 Cubicle with gravity waste Part no: SHTCUSE2G Part no: SHTCUSE2G Part no: SHTCUSE2G Price: £2050
Price: £2050 Price: £2050
Ref
K
Cistern
Outlet pipe
J
Dimensions
A
2040
B
1950
C
1205 * +
D
760
E
250
F
1025
G
60
H
810
J
50
K
200
Notes:
Standard doors
Tri-fold doors
600
580
435 395
180
Note:
top of cubicle base
470
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
25
CUBICLE EXTRAS
Ceramic basin and lever taps are available as an alternative to the standard plastic basin.
This option must be specified at time of order to enable reinforcement of the side panel.
Cannot be retro-fitted
code
SHSU029
product
Price Ceramic cubicle basin & lever taps£105
Mira Advance ATL Flex Electric Shower
Mira Advance ATL Flex 9kW electric shower offers a flexible solution for those who are looking for safety and increased mobility within the showering area
Extended temperature control lever, 2m hose and additional handset holder for flexible showering heights.
All other features as Mira Advance Standard
2 Year guarantee
codeproduct
IDWMA05A
Mira Advance ATL Flex - Electric 9 Kw shower heater, incl. 1 metre riser rail and 2 metre hose,
separate wall mounted handset holder, standard riser rail, and easy touch temperature control lever
Price
£350
Mira Excel Thermostatic Mixer shower
Showering with precise thermostatic control, recognising and compensating for changes in water temperature to provide an extremely safe and satisfying shower
Easy installation features save time and installation costs
Includes maximum temperature stop for safe showering
5 year guarantee
codeproduct
IDWME01A
Mira Excel - Thermostatic Mixing Valve (handset, riser rail and hose included)
SYMBOLS: Bulk item
26
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Price
£425
SANITARY SYSTEMS
Saniplus small bore sanitary system
Breaks down toilet waste from a shower, wash basin or W.C for pumping away through a small bore (22mm) pipe
A powerful motor enables the unit to pump the waste and water up to 5m vertically, 100m horizontally or a lesser combination of both, where conventional large bore pipework is impractical
Features a new case with sound reduction and integrated carbon filter
Can be used with Whale pump option
code
SH0411
product
Price Saniplus sanitary system£615
Motor induction motor (no carbon brushes or gears to wear out). Tested over 30,000 cycles.
Watts (Consumption) 400w
Electrical Supply 220-240V 50Hz
Flow rate at max head l/min 40 Horizontal Discharge 100 metres
Vertical Discharge 5 metres
Gravity fall on horizontal installations 1:100
Discharge Pipe Diameter 22mm
Materials Polypropylene, C.R.P., stainless steel, Neoprene Type of WC Pan (not included)
Short spigot 100mm HO outlet (BS EN 33/37) Motor RPM 2800 RPM
Normal Running Time WC 10–20 secs approx or as required, to discharge bath, shower etc
Dimensions (vertical height is measured from floor level) 512W x 305 O/H x 200D (requires 210mm behind spigot)
Designed to fit BS EN 33/37 WC pans.
As close coupled cistern dimensions vary, it may be necessary, with certain designs, to utilise a spacer between cistern and wall
Saniplus small bore sanitary system (shown with Whale pump option)
116
Saniplus small bore sanitary system with Whale pump
234
512
Where the situation demands, or if the pipe run is greater than that
specified for the Whale pump a Saniplus small bore sanitary system
may be used. The discharge from the Whale pump must go into the top
of the Saniplus small bore sanitary system.
Do not use the bottom entries.
181
190
49
294
40
270
It is preferable to have two separate discharge lines to waste and
drainage when used in the same room as a Saniplus small bore sanitary system. Any failure of the Saniplus small bore sanitary system will
not be detected by the Whale pump.
Pumping distance illustration
Metres horizontal
based on a 1:100 fall
Average ceiling
height 2.5m
NB: Vertical lift must
precede horizontal run
Macerator shown in relation to a Chiltern Invadex
Shower toilet cubicle
50m
Saniplus
Note: If you increase 'horizontal' pipe fall to full 1:40 gravity fall, then the
horizontal distance can be increased to virtually any distance required
(also increase pipe size)
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
27
WET FLOORS
SYMBOLS: Bulk item
28
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
WET FLOOR SELECTOR (TRUE LEVEL ACCESS - NO THRESHOLD)
Use this wet floor selector to choose the EasiDec Extra size required. The key at the foot of the page explains the
symbols used throughout this section. For enclosures and ordering details refer to pages 32-35.
Note: EasiDec models 1, 2, 3, 6, & 7 are recommended DDA compliant sizes. However, other sizes are available
as shown and the final decision will rest ultimately with the specifier. Additional sizes are available to special
request.
NOT HANDED
EasiDec Extra
Wet floor trays are 22mm thick
1000
1300
1500
Deck 2
Deck 3
1000
800
900
Deck 4
800
1400
Deck 5
Deck 6
900
1200
800
900
800
A unique, drainage feature allows the installer to
rotate the drain aperture to any position that will
Deck 7
avoid a joist or any other under floor obstruction.
Simply place the EasiDec Extra where it will be
1200
installed and if the drain aperture interferes with a
joist, just rotate the centre section until it is clear
and fit the trap.
This tray is quick fit and requires no under
boarding.
Wet floor Gravity waste
G3
details
Whale Shower Drain
Pump Kit
See pages 39-42for
P1
P1.1
KEY
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
29
WET FLOORS
The EasiDec is installed under the floor and covered with vinyl flooring to create a completely level access
showering area.
Typical wet floor door & enclosure options (see p32-35 0for the complete range)
Slide/fold doors for alcove installation
Pair of doors hinged off jamb and
meeting on the corner
Pair of bi-fold doors hinged off wall
and meeting on the corner
Kit contents
Jamb panel & assistance pole
Rising butt hinge
Door and enclosure kit contents:

EasiDec wet floor dec

Door set c/w rising butt hinge (as appropriate) shown right

Half height fixed panel (s) (as appropriate)

Assistance pole(s) (1950mm) to Curtain Rail (floor to Ceiling pole available as an option - advise height)

Wet floor bolster (to suit)

Curtain Track and Hooks to suit door option

White Shower Curtain

Dec only contents

EasiDec wet floor dec

All Chiltern Invadex EasiDec doors are fitted with rising butt hinges as standard.
This allows the door to rise and glide smoothly and effortlessly across the floor
surface, as shown below. Allows the doors to rise 7mm and offers flexibility
through 180 degree rotation.
Rising butt hinge
How to order
1. Choose the size of EasiDec Wet floor tray required from the options shown on page 29.
2. Choose the EasiDec and enclosure option required from the 15 options shown on pages 32-35.
3. Choose the waste option required - Gravity or pumped waste from the options shown below.
Drain options
The EasiDec is supplied with a G3 gravity waste (see page 37-38 for details). If a pumped waste is required we
offer the following options.
Waste options - Pumped
code
IDWWP05
IDWWP07
product
P1 Pump with wet floor gulley
P1.1 Pump with wet floor gulley for use with Mira Advance Extra shower unit. colour
White
White For full details see page 39 for the IDWWP05 or page 40 for the IDWWP08
SYMBOLS: Bulk item
30
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Price £366
£396
WET FLOOR BOLSTER
Wet floor bolster section - 35mm radius
for use with Chiltern Invadex doors & enclosures only
(Included as standard with enclosure package)
Bolsters are included in the enclosure kit as standard for the EasiDec range
Wall mounted aluminium extrusion which allows a Chiltern Invadex wet floor enclosure to be fixed to the wall
Follows the 35mm radius for wet floor coving
Wet floor bolster is shown below with Chiltern Invadex slide & fold door
& rising butt hinge
Portascreen shower guard
Containing the spray from a shower is made simple with the Portascreen shower guard. Portable and easy to handle
Folds flat for storage
Hinged doors are easily positioned to provide maximum protection for the carer, when assisting in the shower
Special sizes can be made to order. Extended delivery times apply
code
IDGPS02
IDGPS01
product
White Portascreen Shower Guard - 3 panel (1475mm) White Portascreen Shower Guard - 4 panel (2000mm) Price
£160
£180
Technical information (3 panel)
Individual Panel Lengths
description
Dimensions folded Fully extended length
Overall height
Weight
dimensions
530mm x 815mm (21” x 32”)
1474mm (4’ 10”)
815mm (32”)
9 kg
description
Dimensions folded
Fully extended length
Overall height
Weight
SYMBOLS: Bulk item
Made to order
dimensions
1000mm x 815mm (39” x 32”)
2000mm (6’ 7”)
815mm (32”)
12 kg
Tel: 01869 365500
Panel 1 = 480mm
Panel 2 = 515mm
Panel 3 = 480mm
Panel 1 = 493mm
Panel 2 = 507mm
Panel 3 = 507mm
Panel 4 = 493mm
Fax: 01869 365588
[email protected]
31
WET FLOOR TRAYS & ENCLOSURES
Note:
Gravity waste (G3) included
see pages 39-42 for pumped waste
options.
Option 1
Option 2
Option 3
Left
hand
Left
hand
Kit contents:
Tray c/w gravity waste (G3)
Enclosure (as illustrated)
Curtain rail
White shower curtain
Right
hand
Option 4
Right
hand
Not handed 1300
EASIDEC 1
800
01-1108230E1
Dec only £230
1000
00-101123001
00-101113302 = LH
00-101133302 = RH
00-101113303 = LH
00-101133303 = RH
Price £262
Price £470
Price £770
00-101223001
00-101233002 = LH
00-101233302 = RH
00-101223304
Price £262
Price £470
Price £760
00-101323301
00-101313302 = LH
00-101333302 = RH
00-101313303 = LH
00-101333303 = RH
Price £262
Price £470
Price £770
00-101423301
00-101413302 = LH
00-101433302 = RH
00-101423304
Price £262
Price £470
Price £760
00-101523301
00-101513302 = LH
00-101533302 = RH
Price £262
Price £470
00-101623301
00-101613302 = LH
00-101633302 = RH
00-101613303 = LH
00-101633303 = RH
Price £262
Price £470
Price £770
00-101723301
00-101713302 = LH
00-101733302 = RH
00-101723304
Price £297
Price £510
Price £760
EASIDEC 2
1000
01-1108230E2
Dec only £230
1500
EASIDEC 3
800
01-1108230E3
Dec only £230
900
EASIDEC 4
900
01-1108230E4
Dec only £230
800
EASIDEC 5
800
01-1108230E5
Dec only £230
1400
EASIDEC 6
900
01-1108230E6
Dec only £230
1200
EASIDEC 7
1200
SYMBOLS: Bulk item
32
Made to order
01-1108230E7
Dec only £264
Not handed Tel: 01869 365500
Fax: 01869 365588
[email protected]
Note:
options.
Option 5
Option 6
Option 7
Left
hand
Left
hand
Kit contents:
Curtain rail
Right
hand
Option 8
Right
hand
Not handed 1300
EASIDEC 1
800
01-1108230E1
Dec only £230
00-101123305
00-101113306 = LH
00-101133306 = RH
00-101113307 = LH
00-101133307 = RH
00-101123308
Price £670
Price £670
Price £630
Price £595
00-101223306
*Not handed (Square)
1000
EASIDEC 2
1000
EASIDEC 3
800
01-1108230E3
Dec only £230
00-101313306 = LH
00-101333306 = RH
00-101313307 = LH
00-101333307 = RH
00-101323308
Price £670
Price £670
Price £630
Price £595
00-101423306
EASIDEC 4
900
Price £670
01-1108230E4
Dec only £230
00-101523306
800
EASIDEC 5
Price £670
01-1108230E5
Dec only £230
1400
EASIDEC 6
900
01-1108230E6
Dec only £230
1200
00-101623305
00-101613306 = LH
00-101633306 = RH
00-101613307 = LH
00-101633307 = RH
00-101623308
Price £670
Price £670
Price £630
Price £595
00-101723305
00-101723306
00-101723308
Price £700
Price £700
Price £630
EASIDEC 7
1200
SYMBOLS: Bulk item
Made to order
01-1108230E7
Dec only £264
Price £595
00-101323305
900
800
00-101223308
Price £670
01-1108230E2
Dec only £230
1500
Not handed Tel: 01869 365500
Fax: 01869 365588
[email protected]
33
Note:
options.
Option 9
Option 10
Option 11
Option 12
Left
hand
Left
hand
Left
hand
Left
hand
Kit contents:
Curtain rail
1300
Right
hand
EASIDEC 1
800
01-1108230E1
Dec only £230
00-101113311 = LH
00-101133311 = RH
00-101113312 = LH
00-101133312 = RH
Price £648
Price £690
Price £575
Price £655
00-101223310
*Not handed (square)
00-101213311 = LH
00-101233311 = RH
Price £690
Price £575
00-101313309 = LH
00-101333309 = RH
00-101313310 = LH
00-101333310 = RH
00-101313311 = LH
00-101333311 = RH
00-101313312 = LH
00-101333312 = RH
Price £648
Price £690
Price £575
Price £655
00-101423310
00-101413311 = LH
00-101433311 = RH
Price £690
Price £575
00-101523310
00-101413311 = LH
00-101433311 = RH
Price £690
Price £575
00-101613309 = LH
00-101633309 = RH
00-101613310 = LH
00-101633310 = RH
00-101613311 = LH
00-101633311 = RH
00-101313312 = LH
00-101333312 = RH
Price £648
Price £690
Price £575
Price £655
00-101723310
00-101713311 = LH
00-101733311 = RH
00-101713312 = LH
00-101733312 = RH
Price £720
Price £610
Price £690
01-1108230E2
Dec only £230
EASIDEC 3
800
01-1108230E3
Dec only £230
900
EASIDEC 4
900
01-1108230E4
Dec only £230
800
EASIDEC 5
800
01-1108230E5
Dec only £230
EASIDEC 6
1400
900
01-1108230E6
Dec only £230
1200
EASIDEC 7
1200
SYMBOLS: Bulk item
34
Made to order
01-1108230E7
Dec only £264
Right
hand
00-101113310 = LH
00-101133310 = RH
EASIDEC 2
1500
Right
hand
00-101113309 = LH
00-101133309 = RH
1000
1000
Right
hand
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Note:
options.
Option 13
Option 14
Option 15
Left
hand
Left
hand
Kit contents:
Curtain rail
Right
hand
Right
hand
Not handed
1300
EASIDEC 1
800
01-1108230E1
Dec only £230
00-101123313
00-101113314 = LH
00-101133314 = RH
00-101113315 = LH
00-101133315 = RH
Price £695
Price £655
Price £830
00-101323313
00-101133314 = LH
00-101333314 = RH
00-101313315 = LH
00-101333315 = RH
Price £695
Price £655
Price £830
00-101623313
00-101613314 = LH
00-101633314 = RH
00-101613315 = LH
00-101633315 = RH
Price £695
Price £655
Price £830
00-101723313
00-101713314 = LH
00-101733314 = RH
00-101713315 = LH
00-101733315 = RH
Price £725
Price £690
Price £860
1000
EASIDEC 2
1000
01-1108230E2
Dec only £230
1500
EASIDEC 3
800
01-1108230E3
Dec only £230
900
EASIDEC 4
900
01-1108230E4
Dec only £230
800
EASIDEC 5
800
01-1108230E5
Dec only £230
1400
EASIDEC 6
900
01-1108230E6
Dec only £230
1200
EASIDEC 7
1200
SYMBOLS: Bulk item
Made to order
01-1108230E7
Dec only £264
Tel: 01869 365500
Fax: 01869 365588
[email protected]
35
WET FLOOR WASTE OPTIONS
SYMBOLS: Bulk item
36
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
G3
WET FLOOR GRAVITY WASTE
See p29 for
EasiDec
options
Gravity waste for wet floor
suitable for timber floor construction
Included with Easidec kit
Designed for use on a timber floor installation - sits within void in joists
For use with the EasiDec wet floor
19mm water seal trap
Removable top cover for routine cleaning and maintenance
code
SH0203
product
Plain gravity waste adaptor and trap
colour
White
Price £63
WET FLOOR GRAVITY WASTE SPECIFICATION
Gravity waste for wet floor
cross section exploded view
Dip Tube
Drain Cap
Dip Tube O Ring
Bucket
Clamp Screw
Clamp
Bowl
Sump Screw
Sump Seal
Sump
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
37
G3
WET FLOOR GRAVITY WASTE
See p29 for
EasiDec
options
TYPICAL CROSS SECTION THROUGH WET FLOOR ‘EASIDEC’
- TIMBER FLOOR CONSTRUCTION
7
Altro
Captile
profile
150mm Altro upstand
35mm cove former
Altro Marine 20
2
16
46
Altro
6mm water proof
based ply
Altro Captile
profile
B
C D
A
Ceiling (room below)
18
35
75mm x 50mm supporting
noggin spaced at 500 centres
2
Altro coveformer
Gravity waste
A = 175mm - typical 150mm joist
42mm (1 1/2”) Cavity wall
construction
waste pipe
18
35
Altro coveformer
B = 85mm - to centreline of waste
C = 98mm
D = 105mm (Invert level)
Typical dimensions
Recommended fall of waste pipe = 1:40
TYPICAL 3D SECTION THROUGH WET FLOOR ‘EASIDEC’
- TIMBER FLOOR CONSTRUCTION
6mm water proof based ply
(finished floor level)
Cavity wall
construction
19mm tongue and groove
floorboards
Typical EasiDec wet floor tray
Typical joist installation
450 or 600 c/c
150mm joist depth
Gravity waste positioned
within joist void.
Routable positioning
of trap to suit site conditions
42mm (1 1/2”) waste pipe
routed to SVP
SYMBOLS: Bulk item
38
Made to order
Support noggins 38mm minimum thickness
(or at least half the depth of joist)
Tel: 01869 365500
Fax: 01869 365588
[email protected]
WET FLOOR PUMPED WASTE
Pumped waste for wet floor
suitable for concrete floor construction
P1
See p29 for
EasiDec
options
Designed for use on a concrete floor installation
Ideal application when a wet floor installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor.
For use with:
- EasiDec wet floor range
Can pump hair, gel, grit and other shower waste without blocking
No filter in waste system - no cleaning required
Valves integral to the pump prevent odours escaping from the drainage pipe
Further technical information available on request
code
IDWWP05
product
Pump with wet floor gulley
colour
White
Price £366
WET FLOOR PUMPED WASTE SPECIFICATION
exploded view
22mm/15mm speed fit connector
45mm
Depth in relation to
underside of gulley lip
(to underside of collar)
130mm diameter lower cup
with 22mm side spigot
15mm diameter pipe
to suit site conditions
plan view
100mm
200mm
diameter
195mm
Pumped waste for wet floor cross section assembled
EasiDec profile
located
underneath
gulley lip
Main body
130mm diameter
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
39
TYPICAL CROSS SECTION THROUGH WET FLOOR EASIDEC
- CONCRETE FLOOR CONSTRUCTION
P1
See p29 for
EasiDec
options
7
Altro
captile
profile
Chiltern Invadex Easidec
35mm cove former
Altro Marine 20
6mm waterproof
plyboard/self levelling
compound
2
16
46
Altro
Altro Captile
profile
B
Whale assembled
gulley
A
18
Self levelling
compound
35
Typical 50mm screed
Weak sand/cement mix
or expanding foam
Typical 150mm
pre-cast concrete
18
A = 225mm
B = 45mm - depth of gulley to underside of speed fit connector
35
Altro coveformer
Typical dimensions
CONCRETE FLOOR WITH
VINYL FLOORING
Captile
profile
FLOATING FLOOR WITH
VINYL FLOORING
Captile
profile
Tiled finish
35mm
Cove former
Wet floor
gulley
35mm
Cove former
35mm
Cove former
2
Altro coveformer
Tiled finish
Wet floor
gulley
35mm
Cove former
Plywood
Plywood
Insulation
Chiltern
Invadex
EasiDec
Altro marine 20
(or similar)
Altro marine 20
(or similar)
Chiltern Invadex
EasiDec
Typical 150mm
pre-cast concrete
SYMBOLS: Bulk item
40
Made to order
Typical 50mm
screed
Tel: 01869 365500
Timber tray support
Insulation
Typical screed/ Typical one way
spanning ribbed, troughed
or waffle floor - minimum thickness 75mm
Fax: 01869 365588
[email protected]
P1
See p29 for
EasiDec
options
For illustration purposes only
Flow switch and ‘Y’ filter
code
IDWWP03
product
Whale pump mixer conversion kit (Flow switch & ‘Y’ filter) required for shower mixer valve installation
Price £35
Important:
An additional flow switch is required for a shower mixer valve installation connected into both the hot and cold water
supply.
The switch may be positioned horizontally or vertically.
The arrow indicated
on the flow switch shows
the direction of the water flow
To transformer
15mm copper pipe/150mm length
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
41
TM
(Whale Instant Match for use with Mira Advance Extra)
P1.1
See p29 for
EasiDec
options
Ideal application when a wet floor installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor.
Quiet gulley
No set up required - plug and play
No flow sensor/flow switch to fit
For use with the EasiDec wet floor range
Further technical information available on request
Important note: The Whale Instant Match pump/wet floor gulley can only be used with the Mira Advance Extra or
Mira Advance Flex Extra. This is a different shower unit to the standard Mira, incorporating an internal shower flow
sensor.
TM
code
IDWWP07
product Pump with wet floor gulley for use with Mira Advance Extra shower unit. colour
White Price £396
Cross sectional views/dimensional information is shown on pages 39-40
See pages 32-35 for details of how to order the EasiDec
Mira Advance Flex Extra
Designed for use with the Whale Instant Match (shown above)
Internal Shower Flow Sensor measures the flow rate going to the shower head. The Whale Instant Match automatically adjusts the pump speed in relation to the flow rate of the Mira Advance Extra Shower.
Mira Advance Flex ATL 9Kw electric shower has a push button stop and flow controls which are independent of the temperature dial
Safe showering with precise thermostatic control for constant water temperature
ATL - Adjustable Temperature Limit for added safety
Instantly heats water to guarantee a hot shower every time
New fittings - smooth slide bar with easy glide operation
Tactile push button flow controls for ease of use
2 Year guarantee
RNIB approved
BEAB caremark
Features an extended temperature control lever, 2m hose and additional handset holder for flexible showering heights.
code
IDWMA05AE
product Mira Advance Flex Extra Thermostatic shower unit Price £384
5 year guarantee
codeproduct
IDWME01A
SYMBOLS: Bulk item
42
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Price
£425
LEVEL & EASY ACCESS SHOWER TRAYS & ENCLOSURES
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
43
SHOWER TRAY SELECTOR - LEVEL ACCESS SHOWER TRAYS
Use this shower tray selector to choose the handing and tray size required. See Key on the following page for
waste options
SANDWELL 760
SANDWELL 655
LEFT HAND RIGHT HAND
1850
1850
1000
1850
1000
1850
1000
1000
820
715
715
G1 G1.1
820
P1 P1.1 P2
WESTDALE 655
WESTDALE 760
1165
1165
1165
720
720
G1 G1.1
1165
825
825
P1 P1.1 P2
WESTDALE 850
LEFT HAND
RIGHT HAND
1270
1270
915
915
G1 G1.1
P1 P1.1 P2
WESTDALE 1000
NOT HANDED
1065
Rotate
to suit
1065
G1 G1.1
P1 P1.1 P2
CARDALE MK2
LEFT HAND
1340
795
Above floor
waste
RIGHT HAND
1340
795
P3
SYMBOLS: Bulk item
44
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER TRAY SELECTOR - EASY ACCESS SHOWER TRAYS
Use this shower tray selector to choose the handing and tray size required. The key at the foot of the page explains
the symbols used throughout this section.
DOVEDALE MK2
Option A
Option B
1135
1135
Outlet
700
700
Above floor
waste
Option C
Outlet
Option D
1135
1135
Outlet
700
700
G2
Outlet
P2
Notes: Trap not included. A P/S trap is suggested. Outlet diameter is 40mm.
EDALE MK2
LEFT HAND
RIGHT HAND
Above floor
waste
1110
820
G2
1110
820
P2
Notes: Trap not included. A P / S trap is suggested. Outlet diameter is 40mm.
Gravity waste
(Invawaste)
See pages 82-84 for
G1
Above floor waste outlet
G2
See page 84 for
KEY
SYMBOLS: Bulk item
Made to order
Whale Shower Drain
Pump Kit
G1.1
See pages 85-89 for
P1
Shower Waste Pump
P1.1
P2
details
Shower tray Integral Pump
P3
details
Tel: 01869 365500
Fax: 01869 365588
[email protected]
45
TECHNICAL INFORMATION
SHOWER TRAY & ENCLOSURE SPECIFICATION GUIDE
- LEVEL ACCESS
- EASY ACCESS
SYMBOLS: Bulk item
46
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER TRAY SPECIFICATION GUIDE - LEVEL ACCESS
See pages 58-59 for details of How to order
Sandwell Trays - Slide & Fold Door Configuration (Alcove)
Shower Chair Compatibility
Self propelled
Attendant propelled
Sandwell 655 Model
Trim to suit using
hard point saw
(ONLY Alcove
Installation)
Ref Dimensions
A1950
B 820
C1850**
D715
E299
F 65
Left hand tray
280
Jamb detail
Plan view
325
715
655
484
1800
1850
Thick black line
Right hand tray
denotes wall position
A
Jamb detail
325
715
D
Left hand shower tray Illustrated
Sandwell 760 Model
484
Door size: 1800mm (including jamb)
Internal showering area: L= 1800mm x W =635mm
Ref Dimensions
A1950
B 834
C1850**
D820
E299
F 65
Trim to suit using
hard point saw
(ONLY Alcove
Installation)
Left hand tray
Jamb detail
Radius 725mm
280
Plan view
385
760
Stud
wall **
1000
484
Thick black line
denotes wall position Right hand tray
Jamb detail
Radius 725mm
280
385
820
Tiled
upstand
B
Plan view
760
Stud
wall **
484mm
820
1800
1850
A
C
484mm
1000
1800
1850
C
F
Plan view
655
B
E
280
Radius 725mm
Stud
wall **
Tiled
upstand
F
484mm
Stud
wall **
1000
400*
E
400*
Radius 725mm
484mm
1000
484
1800
1850
D
Door size: 1800mm (including jamb)
Notes
1. Dimension A is to the top of the assistance pole (from the shower tray). A 2.5m floor to ceiling, or 2.5m floor to curtain rail pole (to special order) are also available
(both can be trimmed).
2. The Sandwell 655 is supplied with edging strips for use with a suitable Altro flooring system - (only one strip is used for alcove installation on the longest edge
(C). Add 30mm to dimension C.
3. Dimensions C&D are measured from the face of the tiling lip
4. The drying area length can be cut to suit - to a minimum of 1200mm. It is recommended that trays which have been trimmed should be used in an alcove
installation only
* Dimension indicates position that door will fold to before encroaching on the back wall
** Stud wall to be built onto drying area leaving a maximum dimension tile to tile of 1800mm.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
47
Sandwell Trays - Trifold Door Configuration
Self propelled
Attendant propelled
Sandwell 655 Model
Trim to suit using
hard point saw
(ONLY Alcove
Installation)
Ref Dimensions
A1950
B 834
C1850
D715
E299
F 65
Left hand tray
Jamb detail
280
765
Plan view
325
299mm
655
715
1000
299
A
1850
Thick black line
Right hand tray
Tiled
upstand
B
Jamb detail
280
765
Tiled
upstand
Plan view
325
F
E
C
Drying area
299mm
655
1000
715
D
299
1850
Door size: 1000mm x 655mm (including jamb)
Sandwell 760 Model
Trim to suit
using hard
point saw
Ref Dimensions
A1950
B 834
C1850
D820
E299
F 65
Left hand tray
Jamb detail
280
765
299mm
760
Thick black line
Right hand tray
Tiled
upstand
820
1000
299
A
1850
Jamb detail
280
765
B
Plan view
Tiled
upstand
385
F
E
Drying area
1850
D
299mm
760
1000
820
C
Plan view
385
299
Notes
1. Dimension A is to the top of the assistance pole (from the shower tray). A 2500mm floor to ceiling, or 2500mm floor to curtain rail pole are also available (both can
be trimmed)
2. The Sandwell 655 is supplied with edging strips for use with a suitable Altro flooring system. Add 30mm to dimensions C&D
4. The drying area length can be cut to suit - to a minimum of 1200mm. It is recommended that trays which have been trimmed should be used in an alcove
installation only
5. Rising butt hinge lifts the door 7mm and incorporates a 180 degree hinge to allow full flexibility
* May be used on alcove installation if required. Stud wall to be built onto drying area leaving a maximum dimension tile to tile of 1800mm.
SYMBOLS: Bulk item
48
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Westdale Tray Options
Self propelled
Attendant propelled
Westdale 655 model
Ref Dimensions
A1950
B 834
C1165
D720
E400
F 65
Left hand tray
Jamb detail
280
765
Plan view
325
400mm
655
720
1115
A
400
Thick black line
Right hand tray
1165
Jamb detail
280
765
Plan view
B
F
400mm
325
720
655
1115
E
C
1165
D
400
Westdale 760 Model
Ref Dimensions
A1950
B 834
C1165
D825
E400
F 65
Left hand tray
Jamb detail
285
765
400mm
760
825
1115
A
400
Thick black line
Right hand tray
1165
Jamb detail
285
765
B
Plan view
385
825
760
F
Plan view
385
400mm
1115
E
C
SYMBOLS: Bulk item
Made to order
1165
D
400
Tel: 01869 365500
Fax: 01869 365588
[email protected]
49
See page 62 for details of How to order
Westdale 1000 Model
Ref Dimensions
A1950
B 820
C1065
D1065
E299
F 65
G299
A
B
F
E
C
D
Thick black line
Westdale 1000
Left hand door
Right hand door
175
175
299
175
1065
1000
1000
Jamb Detail
G
Tray not handed
Left hand door Illustrated
299
175
1065
1000
1000
299
750
Plan view
750
299
1065
299mm
1065
299mm
A
B
F
E
C
D
G
Tray not handed
Right hand door Illustrated
Notes
1. Dimension A is to the top of the assistance pole (from the shower tray). A 2500mm floor to ceiling, or 2500mm floor to curtain rail pole are also available (both can
be trimmed)
2. The Westdale 655 is supplied with edging strips for use with a suitable Altro flooring system. Add 30mm to dimensions C&D
4. Rising butt hinge lifts the door 7mm and incorporates a 180 degree hinge to allow full flexibility
SYMBOLS: Bulk item
50
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
See pages 63 for details of How to order
Cardale - Trifold door
Ref
A
B
C
D
E
Dimensions
1830
820
1340
795
598
Left hand tray
Jamb detail
Allow 35mm deep from top of existing floorboards
Plan view
220
690
598mm
220
A
707
795
1255
598
Thick black line
B
1340
Right hand tray
Jamb detail
Plan view
E
C
220
690
D
598mm
220
707
795
1255
598
1340
Door size 1255mm x 707mm (including Jamb)
Self propelled models
Attendant propelled models
1. Dimension A is to the top of the assistance pole (from the shower tray). 2500mm floor to ceiling, or 2500mm floor to curtain rail poles (both to special order) are also available (both can be trimmed)
2. The Cardale MK2 is supplied with edging strips. Add 30mm to dimensions C&D
Cardale - Alcove door
Ref Dimensions
A 1830
B 820
C 1340
D 1240
E 795
220
795
220
Stud wall to be
constructed over
and onto the tray
707
415
Thick black line
B
220
220
707
795
415
A
RIGHT HAND DOOR
LEFT HAND DOOR
1240
1340
1240
1340
C
E
D
C
1. Dimension A is to the curtain rail (variable;shown for example)
2. The Cardale MK2 is supplied with edging strips. Add 30mm to dimension E
4. Incorporates a 180 degree hinge to allow full flexibility
5. Stud wall to be built onto tray leaving a maximum dimension tile to tile of 1240mm.
Self propelled models
SYMBOLS: Bulk item
Made to order
Door size 1240mm
* Only straight tri-fold door available.
Attendant propelled models
Tel: 01869 365500
Fax: 01869 365588
[email protected]
51
SHOWER TRAY SPECIFICATION GUIDE - EASY ACCESS
See pages 64 for details of How to order
Dovedale - Single door (half or full height)
A
J
E
C
D
G
Single door option
Half height door Illustrated
660
1110
640
700
Clear opening
space 610mm
1080
Clear opening
space 610mm
OPTION A
326mm
Outlet
OPTION D
Jamb detail
Options B & C
1135
1135
Outlet
1080
640
Outlet
1080
700
650
650
Clear opening
space 610mm
Plan view
640
700
326mm
Clear opening
space 610mm
A
full height
OPTION B
door
1918mm
The door layout
shown above can be
made from the same
F order code.
(Option C shown)
J
E
Plan view
Outlet
700
Thick black line
Height of
Jamb detail
1135
1135
650
B
Options A & D
650
The door layout
shown above can be
made from the same
F
order code.
(Option C shown)
Ref Dimensions
A1950*
B 820
C1135
D700
E830
F 80
G1045
H35
H175
J345
C
Door size: 1110mm x 660mm (including jamb). Front jamb size is 326mm.
*Dimension A is to the top of the frame (from the shower tray)
H
D
G
Single door option
Full height door Illustrated
Projection 45mm for
coupling up
Options A & D
1135
1135
Outlet
1110
700
1110
700
660
660
OPTION A
OPTION D
Options B & C
B
1135
J
F
E
Outlet
380
Ref Dimensions
A1950
B 820
C1135
D700
E830
F 80
G1045
H35
H175
J345
380
A
Outlet pipe height
to centreline
Pipe diameter
1 1/2” (40mm)
H1
Dovedale - Trifold door
OPTION C
G
1135
1110
Outlet
660
1110
700
Outlet
660
D
Trifold door Illustrated
OPTION B
380
380
C
Thick black line
OPTION C
Door size: 1110mm x 660mm (including jamb). Front jamb size is 326mm.
H
Self propelled
SYMBOLS: Bulk item
52
Made to order
Attendant propelled
H1
Tel: 01869 365500
Outlet pipe height
to centreline
Projection 45mm for
coupling up
Pipe diameter
1 1/2” (40mm)
Fax: 01869 365588
[email protected]
700
SHOWER TRAY SPECIFICATION GUIDE - EASY ACCESS
See page 65 for details of How to order
Edale Tray
Self propelled
Attendant propelled
Ref Dimensions
A1950
B 820
C1110
D820
E744
F 76
G280
H40
H180
Adjustable
horizontal
grab rail
A
B
F
C
E
G
D
Detachable ramp size 790mm x 280mm
Thick black line
denotes wall
position
Left hand tray
1110
820
H1
Pipe diameter
1 1/2” (40mm)
Projection 45mm
for coupling up
Plan view
744mm
760
1070
744
Right hand tray
400
Jamb detail
1110
Plan view
760
1070
820
744mm
744
Outlet pipe height
to centreline
H
Jamb detail
400
Door size 1070mm x 760mm (including Jamb)
Ramp width 790mm
Notes
1. Dimension A is to the top of the assistance pole (from the shower tray)
3. The adjustable horizontal grab rail can be positioned at any height on the assistance pole during installation
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
53
SPECIAL SHOWER ENCLOSURES
Made to measure special shower enclosures
Chiltern Invadex offer an extensive range of shower enclosure options to help
overcome issues with room layout, space availability and client requirements.
For instance, a whole enclosure can be made to a special size in accordance
with the measurements supplied (subject to confirmation).
How to order your bespoke shower enclosure
SPECIAL SHOWER
ENCLOSURES
mm
There may be circumstances where
a special enclosure is required
due to space restrictions or client
requirements.
Please call the Technical Helpdesk
on 01869 365500 for assistance.
Dimensions and plan details will be
required.
1.A drawing is required; this can be emailed, faxed or posted.
NOTES:
It is important that accurate measurements are provided detailing the distance at W, X&Y (this is to check whether walls are square) and Z as shown right.
If a special door enclosure is required please indicate the shower tray model it relates to (if required).
2.On receipt of your bespoke enclosure requirements the Chiltern Invadex Technical Department will confirm feasibility of requested design or advise an alternative solution.
3.A written quotation is provided based on the final drawing and delivery details confirmed.
W
Y
Z
X
2530
720
550
1050
1630
1165
HOT WATER
CYLINDER
Typical situation where a special door configuration was designed to
suit site conditions. 3D versions are shown right.
SYMBOLS: Bulk item
54
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
GENERAL INFORMATION - WET FLOOR/TRAYS & ENCLOSURES
1. TRAYS/CUBICLE BASES
Chiltern Invadex offer a 25 year warranty on all shower trays against deficiencies arising in the manufacturing process
(provided the tray has been installed in line with Chiltern Invadex recommended installation methods and has not been
the subject of misuse).
Cleaning and Maintenance
The tray/cubicle base is manufactured from glass reinforced plastic which is extremely tough and resilient. However,
with regard to the surface (including the permanent anti-slip feature) avoid the use of household bleaches, solvents
and abrasive cleaners. To retain the surface quality of your shower tray and enclosure (or Portascreen), weekly
cleaning using warm water and a soft cloth is recommended. For the slip resistant area of the shower tray you may
need to use a stiff brush. Stubborn stains may require a non-scratch liquid cleaner. Do not use abrasive cleaners or a
scouring powder on any of the surfaces. Use of scourers will dull the finish of the surfaces and spoil the appearance of
your tray and enclosure/Portascreen.
2. ALUMINIUM SURROUNDS/CURTAIN RAILS
Chiltern Invadex aluminium surrounds are manufactured from alloy 6063 which provides good extrudability and a high quality surface finish. In the heat-treated condition, alloy 6063 provides good resistance to general corrosion, including resistance to stress corrosion cracking.
3. GLAZING PANELS
Enclosures are manufactured from PET, the brand name for extruded Polyethylenterephthalate polyester sheets.
PET specification details:
Excellent transparency and brightness
High impact strength, close to that of polycarbonate
In impact based applications, lower thicknesses to those of acrylic sheets can be employed with better results
Ductile, elongation to breaking similar to that of polycarbonate
Excellent chemical resistance
Excellent fire resistance, low generation of non-toxic smoke
Recyclable, respectful of the environment, completely combustible, without any emission of toxic substances that contaminate landfills
Reduce noise transmission
TOUGHENED SAFETY GLASS (IMPRESSIONS RANGE)

Toughened glass, which conforms to BS6206 is classified as safety glass and in the unlikely event of accidental breakage will break into small harmless pieces.

The Impressions Collection range has 4mm thickness toughened safety glass fitted.

Toughened safety glass conforms to BS6206 Class A

Up to six times stronger than ordinary annealed glass

Improved thermal breakage performance

Each piece of glass is identified as safety glass

Toughened is the preferred lighweight safety glass option
See tray/cubicle bases cleaning instructions above.
4. CURTAINS

113gms (4oz) fabric weight

100% Polyester impregnated and coated with microporous polymers

Anti-fungal - will not support growth of mildew or any other fungal growth. Tested to BS6085 Part 5: 1992.

Antibacterial - offers antibacterial protection as per ASTM2149-01 method: for the determination of the presence of (Aegis) Antibacterial agent.

Stain resistant - excellent stain removal for blood, urine, grease, ink, coffee, Iodine, Betadine
Routine soap and water sponging is effective for ordinary soiling. Fresh stains both oil and water based are easily
removed using most water based household spray cleaning agents. Antiseptic cleaning agents can also be used and
more stubborn stains may require a safe solvent such as Isopropyl alcohol or mineral spirit.
As part of our commitment to new product development we reserve the right to alter specifications without prior notice.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
55
GENERAL INFORMATION - WET FLOOR/TRAYS & ENCLOSURES
Fitting Instructions & CAD drawings (Wet floors/Shower trays/Shower cubicles)
Refer to www.chilterninvadex.co.uk/architects for full details.
Section through Sandwell/Westdale shower tray
(Refer to page 48-50 for in-depth tray specification).
The illustrations below show how the edging strips (supplied) work in relationship with a typical Altro installation.
This provides a fully bonded finish thus creating a floor level access, with no hazards.
PVC top cover
No 8 x 1 1/2" fixing
Typical 'Altro Marine'
flooring
Silicone sealant
Aluminium gripper section
Sandwell/Westdale
shower tray
Section through gripper/top cap detail
Threshold height of tray
17.00
35.00
Shower trays and enclosures recommended flow rates
The recommended flow rate for the Chiltern Invadex range of shower trays is detailed below;
Level Access; ‘Sandwell’, ‘Westdale’, ‘Cardale’ is 9lt./min. (2 gals./min.)
Easy Access; ‘Dovedale’, ‘Edale’ is 9lt./min. (2 gals./min.)
The waste discharge rate can also be affected by site conditions. Certain gravity models are supplied with a waste
trap - see pages 82-84 for details. Chiltern Invadex also offer a pumped version - see pages 85-89
As a general rule power showers are not recommended if the flow rate exceeds the volumes detailed.
Chiltern Invadex would recommend either a Mira Advance (or Flex variant, for electric needs) or a Mira Excel (for
mixer needs).
Armitage Shanks Synergy range - product migrator
Chiltern Invadex manufactured shower trays and enclosures for Armitage Shanks, as previously shown in The Blue
Book. The below products are available directly from Chiltern Invadex. A cross reference to the products supplied
by Armitage Shanks is shown below.
Armitage Shanks Reference
Chiltern Invadex Model
Abbeydale 950 (discontinued 2014*)
Dovedale
Sandwell 760
Cardale
Side Entry MK2 Shower Cubicle
Synergy 100
Synergy 200
Synergy 300
Synergy 300+
Synergy 400
Chiltern Invadex also supplies many shower trays and enclosures in addition to those shown above.
* May be available as a special order, please call for details
SYMBOLS: Bulk item
56
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
ORDER CODES
SHOWER TRAY & ENCLOSURE ORDER CODES
For shower seats see page 96
Tel: 01869 365500
HOW TO
ORDER
SYMBOLS: Bulk item
Made to order
Fax: 01869 365588
[email protected]
57
SANDWELL MK3 LEVEL ACCESS SHOWER (655/760 MODELS)
HOW TO ORDER
1 Choose shower tray size
2 Choose waste option
3 Choose door option
Shower tray contents:

Door kit (c/w rising butt hinge on Trifold door)

Half height fixed panel

Assistance pole (1950mm) to Curtain Rail
(floor to Ceiling poles are available as an option - additional £15. Please confirm height requirement)




White shower tray (can be trimmed to a minimum of 1200mm on site)

Tray Edging Cover Strips

Waste (only supplied with gravity waste shower tray)

Extras
Shower units shown on p58
Pumped waste options shown on p85-91
Fold up shower seats shown on p96-98
Grab rails shown on p99-100
IMPORTANT NOTE: Trays and door kits are coded separately - for example: To order a Left hand 655 tray with Invawaste and Trifold enclosure
- Order tray (i.e Part number IDISAN44) PLUS door kit (i.e Part number 00-090113305).
LEFT HAND TRAYS
1
2
3
Shower tray size
Waste Option
Trifold door kit
Slide & fold door kit
655 Tray
Impressions collection
Special door kit
00-090113305
00-090113302
See Page 73-76
See Page 54
Price £461 Price £461
G1 Included with
Price £354
tray see page
IDISAN44
82
1000
1850
715
G1.1 Vertical
gravity outlet optional extra refer
to page 84
mm
ALCOVE
ALCOVE
POSSIBLE
P1 Whale pump
760 Tray - optional extra
refer to page 85
Price £354
(low waste tray
IDISAN40
required*)
1850
1000
00-090213305
Price £461
820
00-090213307
Price £461
ALCOVE
*Low waste trays to suit shower pump use are available to special order please call on 01869 365500 opt 1 for details.
PARTS
Trifold Door Kit
Slide & Fold Door Kit
4
5
3
1
5
3
4
2
2
For shower tray part
numbers see above.
numbers see above.
1
655 TRAY
DESCRIPTION
02-100233302
03-040213301
04-030013001
IDGRL3925W
IDGSS22
655 TRAY
PART NUMBER
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
PRICE
£450
£75
£70
£41
£32
760 TRAY
02-100233301
03-040213301
04-030013001
IDGRL3930W
IDGSS22
PART NUMBER
02-050233301
03-040213304
04-030013001
IDGRS72W
IDGSS01
DESCRIPTION
PRICE
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70
£23
£22
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70
£23
£22
760 TRAY
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70
£38
£32
02-050233301
03-040213304
04-030013001
IDGRS72W
IDGSS01
Note: Spare parts for Impressions Collection Door Kits/Special Door Kits - Please refer to Technical Helpdesk on 01869 365500
SYMBOLS: Bulk item
58
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SANDWELL MK3 LEVEL ACCESS SHOWER (655/760 MODELS)
HOW TO ORDER


White shower tray (can be trimmed 
to a minimum of 1200mm on site)


(floor to Ceiling poles are available as an option 
Waste (only supplied with gravity - additional £15. Please confirm height requirement)
waste shower tray)




Extras
IMPORTANT NOTE: Trays and door kits are coded separately - for example: To order a Right hand 655 tray with Invawaste and Trifold
enclosure - Order tray (i.e Part number IDISAN46) PLUS door kit (i.e Part number 00-090133305).
RIGHT HAND TRAYS
1
2
3
Shower tray size
Waste Option
Trifold door kit
Slide & fold door kit
655 Tray
Special door kit
00-090133305
00-090133302
See Page 73-76
See Page 54
G1 Included with
Price £354
tray see page
IDISAN46
82
1850
1000
715
G1.1 Vertical
to page 84
ALCOVE
POSSIBLE
P1 Whale pump
refer to page 85
Price £354
(low waste tray
IDISAN42
required*)
1850
1000
00-090233305
Price £461
mm
ALCOVE
00-090233307
Price £461
820
ALCOVE
PARTS
Trifold Door Kit
4
3
numbers see above.
Slide & Fold Door Kit
5
5
3
4
2
1
2
numbers see above.
1
655 TRAY
DESCRIPTION
02-100213302
03-040233301
04-030033001
IDGRL3925W
IDGSS22
655 TRAY
PART NUMBER
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
PRICE
£450
£75
£70
£41
£32
760 TRAY
02-100213301
03-040233301
04-030033001
IDGRL3930W
IDGSS22
PART NUMBER
02-050213301
03-040233304
04-030033001
IDGRS72W
IDGSS01
DESCRIPTION
PRICE
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70
£23
£22
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70 £23
£22
760 TRAY
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£75
£70
£38
£32
02-050213301
03-040233304
04-030033001
IDGRS72W
IDGSS01
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
59
WESTDALE LEVEL ACCESS SHOWER (655/760 MODELS)
HOW TO ORDER










Extras
- Order tray (i.e Part number IDIWN01) PLUS door kit (i.e Part number 00-060113305).
LEFT HAND TRAYS
1
2
3
Shower tray size
Waste Option
Trifold door kit
655 Tray
00-060113305
See Page 71-72
G1 Included with
Price £321.90
Price £493.10
tray see page
IDIWN01
82
1165
720
G1.1 Vertical
to page 84
Special door kit
See Page 54
mm
ALCOVE
POSSIBLE
P1 Whale pump
refer to page 85
Price £321.90
(low waste tray
IDIWS01
required*)
1165
00-060213305
Price £493.10
825
PARTS
Trifold Door Kit
4
5
numbers see above.
3
1
2
655 TRAY
DESCRIPTION
02-100233302
03-040213302
04-030013001
IDGRL4325W
IDGSS22
PART NUMBER
PRICE
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£90
£70
£38
£32
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£90
£70
£38
£32
760 TRAY
02-100233301
03-040213302
04-030013001
IDGRL4330W
IDGSS22
SYMBOLS: Bulk item
60
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
WESTDALE LEVEL ACCESS SHOWER (655/760 MODELS)
HOW TO ORDER

Door set (c/w rising butt hinge on Trifold door)


(floor to Ceiling pole available as an option - additional £15. Please confirm height requirement)







Extras
- Order tray (i.e Part number IDIWN03) PLUS door kit (i.e Part number 00-060133305).
RIGHT HAND TRAYS
1
2
3
Shower tray size
Waste Option
Trifold door kit
655 Tray
00-060133305
See Page 71-72
G1 Included with
Price £321.90
Price £493.10
tray see page
IDIWN03
82
1165
720
G1.1 Vertical
to page 84
Special door kit
See Page 54
mm
ALCOVE
POSSIBLE
P1 Whale pump
refer to page 85
Price £321.90
(low waste tray
IDIWS03
required*)
1165
00-060233305
Price £493.10
825
PARTS
Trifold Door Kit
4
5
3
2
numbers see above.
1
655 TRAY
DESCRIPTION
02-100213302
03-040233302
04-030033001
IDGRL4325W
IDGSS22
PART NUMBER
PRICE
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£90
£70
£38
£32
1. Door
2. Jamb panel
3. Pole set
4. Curtain rail
5. Curtain
£450
£90
£70
£38
£32
760 TRAY
02-100213301
03-040233302
04-030033001
IDGRL4330W
IDGSS22
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
61
WESTDALE LEVEL ACCESS SHOWER (1000 MODEL)
HOW TO ORDER

Door kit (c/w Trifold door)

Half height fixed panels

Assistance poles (1950mm) to Curtain Rail
(floor to Ceiling poles available as an option - additional £15. Please confirm height requirement)






Waste (only supplied with gravity shower tray)

Extras
IMPORTANT NOTE: Trays and door kits are coded separately - for example: To order a square tray with Invawaste and Trifold enclosure Order tray (i.e Part number IDISW10) PLUS door kit (i.e Part number 00-060523301).
SQUARE TRAY (NOT HANDED)
1
2
3
Shower tray size
Waste Option
Left hand door kit
Right hand door kit
1000 Tray
00-060523301
00-060523302
G1 Included with
Price £335.20
Price £479.80 Price £479.80
tray see page
IDISW10
82
1065
1065
G1.1 Vertical
to page 84
Special door kit
See Page 67
mm
ALCOVE
POSSIBLE
P1 Whale pump
- optional extra
Rotate
refer to page 85
to suit
(low waste tray
required*
PARTS
Left hand door kit
3
5
2
Notes:
numbers see above.
DESCRIPTION
IDATD05W
IDASW10W
IDASWP01W
IDGRL39W
IDGSS22
SYMBOLS: Bulk item
62
Made to order
Anti-microbial
coating
Right hand door kit
6
5
2
Notes:
numbers see above.
1
PART NUMBER
1. Door
2. Jamb panel 3. Pole set
4. Curtain rail
5. Curtain
6
PRICE
£450
£145
£110
£46
£32
DESCRIPTION
IDATD06W
IDASW10W
IDASWP02W
IDGRL39W
IDGSS22
Tel: 01869 365500
3
2
2
1
PART NUMBER
1. Door
4. Curtain rail
5. Curtain
PRICE
£450
£145
£110
£46
£32
Fax: 01869 365588
[email protected]
CARDALE LEVEL ACCESS SHOWER






HOW TO ORDER
1 Choose shower tray handing

White shower tray

Tray Edging Cover Strip

Integral pump

Wiring block

Extras
IMPORTANT NOTE: Trays and door kits on this page are supplied under one code as a complete kit.
1
2
3
Shower tray handing
Waste Option
Trifold door kit
Alcove door kit
Left hand tray
Special door kit
00-080713301
00-080713304
See Page 54
P3 Integral
pumped waste
1340
included
with kit refer
to
page
92
795
mm
Right hand tray
1340
795
ALCOVE
POSSIBLE
00-080733301
Price £1157
00-080733304
Price £1157
Please note:
Tray must be installed
See Page 54
1240mm tile to tile
mm
PARTS
Left hand
9
5
8
Right hand
6
4
8
5
6
3
3
Notes:
number see below
1
2
Trifold door kit
PART NUMBER
9
4
DESCRIPTION
7
Alcove door kit
PRICE
Notes:
number see below
1
2
Trifold door kit
PART NUMBER
DESCRIPTION
7
Alcove door kit
PRICE
IDIC05
1. Tray (both options) £351.80
IDIC07
1. Tray (both options) £351.80
02-100233304
2. Trifold door
£435
02-100213304
2. Trifold door
£435
03-040213303
3. Jamb panel £90
03-040233303
3. Jamb panel £90
04-030013001
4. Pole set
£70
04-030033001
4. Pole set
£70
IDGRL5129W
5. Curtain rail
£38
IDGRL5129W
5. Curtain rail
£38
IDGSS22
6. Curtain
£32
IDGSS22
6. Curtain
£32
ALCOVE MODEL
ALCOVE MODEL
02-100233303
7. Alcove door £270
02-100213303
7. Alcove door
£270
IDGRS72W
8. Curtain rail £23
IDGRS72W
8. Curtain rail £23
IDGSS01
9. Curtain £22
IDGSS01
9. Curtain £22
Electrical &
drainage
components
PART NUMBER
15
12
13
16
SHSU050
SHPU032
SH0004
SHPU004-12V
SHSU019
DESCRIPTION
12. Wiring block
13. Pump
14. Pump cover 15. Rewire lead
16. Flexihose
PRICE
£174
£180
£31
£27
£8
14
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
63
DOVEDALE EASY ACCESS SHOWER (ABOVE FLOOR WASTE)
HOW TO ORDER

White shower tray


Half height fixed panel (820mm height)

Door set

Full height assistance pole



Grab Pole to L-shaped Curtain Rail (Grab Pole to Ceiling available as an option - additional £15.
Please confirm height requirement)

Extras
Pumped waste option shown on p90-91
WASTE POSITIONS A&D
1
2
3
Waste position
Waste option
Single door kit
Trifold door kit
Tray includes
Waste Position G2IDDDAHH
Price £815
integral above floor
A
IDDDATL
Price £815
Waste position
D
IDDDDTL
Price £815
Full height door kit
IDDDAFH
See pages 77
Price £815
waste outlet - refer
to page 84
1135
Outlet
P2 Pump box 700
optional extra refer
to page 90
IDDDDHH
Price £815
IDDDDFH
Price £815
See pages 80
1135
700
Outlet
PARTS
6
Single door kit
Trifold door kit
5
6
5
2
7
Note: Outlet
position A
Illustrated
5
3
4
1
8
Note: Outlet
position A
Illustrated
4
6
3
2
8
1
Note: Outlet
position A
Illustrated
2
8
3
4
DESCRIPTION
IDIDD10
IDIDD18
IDADD02W
IDADSP01W
IDADSP02W
IDADP01W
IDGRL4224W
IDGSS22
IDIDD14
PART NUMBER
1. Tray option A
1. Tray option D
2. Door
3. Side Jamb
4. Front Jamb
5. Frame set
6. Curtain rail 7. Curtain
8. Ramp
PRICE
£296.60
£296.60
£415
£105
£75
£95
£42
£32.00
£45.33
DESCRIPTION
IDIDD10
IDIDD18
IDADTD02W
IDADSP01W
IDADP02W
IDGRL4224W
IDGSS22
IDIDD14
PART NUMBER
1. Tray option A
1. Tray option D
2. Door
3. Side Jamb
4. Frame set
8. Ramp
PRICE
DESCRIPTION
£296.60
IDIDD10
£296.60
IDIDD18
£450
IDADFD02W
£105
IDADFSP01W
£140
IDADFSP02W
£42
IDADFP01W
£32IDGRL4224W
£45.33
IDIDD14
1
PART NUMBER
1. Tray option A
1. Tray option D
2. Door
3. Side Jamb
4. Front Jamb
5. Frame set
6. Curtain rail 8. Ramp
SYMBOLS: Bulk item
64
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
PRICE
£296.60
£296.60
£450
£135
£85
£215
£42
£45.33
DOVEDALE EASY ACCESS SHOWER (ABOVE FLOOR WASTE)
HOW TO ORDER

White shower tray



Door set





Extras
WASTE POSITIONS B&C
1
2
3
Waste position
Waste option
Single door kit
Trifold door kit
Tray includes
Waste Position G2IDDDBHH
Price £815
B
IDDDBTL
Price £815
Waste position
C
IDDDCTL
Price £815
IDDDBFH
See pages 78
Price £815
to page 84
1135
P2 Pump box 700
Outlet
optional extra refer
to page 90
IDDDCHH
Price £815
IDDDCFH
Price £815
See pages 79
1135
Outlet
700
PARTS
Single door kit
3
Note: Outlet
position B
Illustrated
8
1
4
IDIDD16
IDIDD12
IDADD01W
IDADSP01W
IDADSP02W
IDADP01W
IDGRL4224W
IDGSS22
IDIDD14
5
6
5
7
2
DESCRIPTION
Trifold door kit
6
5
PART NUMBER
Note: Outlet
position B
Illustrated
4
6
2
1
3
8
Note: Outlet
position B
Illustrated
2
8
3
1
1. Tray option B
1. Tray option C
2. Door
3. Side Jamb
4. Front Jamb
5. Frame set
8. Ramp
PRICE
£296.60
£296.60
£415
£105
£75
£95
£42
£32
£45.33
DESCRIPTION
IDIDD16
IDIDD12
IDADTD01W
IDADSP01W
IDADP02W
IDGRL4224W
IDGSS22
IDIDD14
PART NUMBER
1. Tray option B
1. Tray option C
2. Door
3. Side Jamb
4. Frame set
8. Ramp
PRICE
DESCRIPTION
£296.60
IDIDD16
£296.60
IDIDD12
£450
IDADFD01W
£105
IDADFSP01W
£140
IDADFSP02W
£42
IDADFP01W
£32IDGRL4224W
£45.33
IDIDD14
4
PART NUMBER
1. Tray option B
1. Tray option C
2. Door
3. Side Jamb
4. Front Jamb
5. Frame set
6. Curtain rail 8. Ramp
PRICE
£296.60
£296.60
£450
£135
£85
£215
£42
£45.33
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
65
EDALE EASY ACCESS SHOWER (ABOVE FLOOR WASTE)
HOW TO ORDER


Door set (c/w rising butt hinge on Tri-fold door)





Optional ramp shown in spare parts section

1 Choose shower tray handing

White shower tray

Tray Edging Cover Strip

Extras
IMPORTANT NOTE: Trays and door kits on this page are supplied under one code as a complete kit (excluding ramp).
1
2
3
Shower Tray Handing Waste option
Trifold door kit
LEFT HAND IDEDLHTL
Price £815
G2 Tray includes
1110
to page 84
820
Special door kit
See page 54
mm
111
0
82
0
P2 Pump box optional extra refer
to page 90
IDEDRHTL
RIGHT
HAND
Price £815
1110
mm 1
1
8
02
01
820
PARTS
Right hand waste
Left hand waste
6
6
7
7
5
5
3
3
4
1
IDIED10
IDAETD01W
IDAEJ01W
IDAPK01W
IDAEPK01W
IDGRL4230W
IDGSS22
IDIEDR14
SYMBOLS: Bulk item
66
Made to order
PART NUMBER
1. Tray
2. Door
5. Cross bar
6. Curtain rail
7. Curtain
8. Ramp
4
8
8
DESCRIPTION
1
2
2
PRICE
DESCRIPTION
£262.40IDIED12
£450
IDAETD02W
£215
IDAEJ02W
£70
IDAPK02W
£27
IDAEPK01W
£40
IDGRL4230W
£32
IDGSS22
£39
IDIEDR14
Tel: 01869 365500
PART NUMBER
1. Tray
2. Door
5. Cross bar
6. Curtain rail
7. Curtain
8. Ramp
PRICE
£262.40
£450
£215
£70
£27
£40
£32
£39
Fax: 01869 365588
[email protected]
CURTAIN RAILS & CURTAINS
Replacement Curtain rails
(A curtain rail is included as standard when ordered with a
shower tray/enclosure)
Curtain rails are manufactured from alloy 6063 which provides a high quality
surface finish
Straight curtain rails
code
IDGRS36W
IDGRS39W
IDGRS72W
IDGRS84W
product
920mm
990mm
1840mm
2135mm
Price
£18.00
£19.00
£23.00
£25.00
Price
£40.00
£38.00
£40.00
£44.00
£58.00
£38.00
£38.00
£38.00
£38.00
£62.00
£38.00
£38.00
760 x 760 x 760mm
815 x 815 x 815mm
920 x 920 x 920mm
760 x 990 x 760mm to suit Sandwell
940 x 940 x 940mm
1040 x 1040 x 1040mm 1040 x 760 x 1040mm to suit Edale MK2
990 x 760 x 990mm to suit Sandwell
650 x 1100 x 650mm
to suit Westdale 655 760 x 1100 x 760mm
to suit Westdale 760 £58.00
£62.00
£58.00
£59.00
£64.00
£68.00
£66.00
£62.00
£55.00
£62.00
£66.00
£68.00
L Shaped curtain rails
code
IDGRL4230W
IDGRL36W
IDGRL37W
IDGRL41W
IDGRL48W
IDGRL4927W
IDGRL5129W
IDGRL3930W
IDGRL4625W
IDGRL7230W
IDGRL4330W
IDGRL4325W
product
1040 x 760mm to suit Edale MK2
920 x 920mm
940 x 940mm 1040 x 1040mm
1200 x 1200mm
1245mm x 685mm
to suit Cardale 1295mm x 735mm
to suit Cardale 990 x 760mm
to suit Sandwell
1170 x 635mm 1840 x 760mm 1090 x 760mm to suit Westdale 760
1090 x 635mm to suit Westdale 655
U Shaped curtain rails
IDGRU30W
IDGRU32W
IDGRU36W
IDGRU3039W
IDGRU37W
IDGRU41W
IDGRU4230W
IDGRU3930W
IDGRU6511W
IDGRU7611W
IDGRU1165W
IDGRU1176W
Replacement Curtains (included as standard with enclosure)
code
SH0430 IDGSS01
IDGSS22
IDGSS55
IDGSS20
IDGSS56
IDGSS16
SYMBOLS: Bulk item
Made to order
113gms (4oz) fabric weight
100% Polyester impregnated and coated with microporous polymers
Anti-fungal - will not support growth of mildew or any other fungal growth. Tested to BS6085 Part 5: 1992.
Antibacterial - offers antibacterial protection as per ASTM2149-01 method: for the determination of the presence of (Aegis) Antibacterial agent.

Stain resistant - excellent stain removal for blood, urine, grease, ink, coffee, Iodine, Betadine

Care & maintenance - Routine soap and water sponging is effective for ordinary soiling. Fresh stains both oil and water based are easily removed using most water based household spray cleaning agents. Antiseptic cleaning agents can also be used and more stubborn stains may require a safe solvent such as Isopropyl alcohol or mineral spirit.
product
price
1800mm Width x 1270mm Length
£16.00
£22.00
£32.00
£32.00
£34.00
£36.00
£36.00
Tel: 01869 365500
Fax: 01869 365588
[email protected]
67
SHOWER UNITS & PORTASCREEN
Mira Advance ATL Flex Electric Shower
Mira Advance ATL Flex 9kW electric shower offers a flexible solution for those who are looking for safety and increased mobility within the showering area
Extended temperature control lever, 2m hose and additional handset holder for flexible showering heights.
All other features as Mira Advance Standard
2 Year guarantee
code
IDWMA05A
product
Mira Advance ATL Flex - Electric 9 Kw shower heater, incl. 1 metre riser rail and 2 metre hose,
separate wall mounted handset holder, standard riser rail, and easy touch temperature control lever
Price
£350
5 year guarantee
code
IDWME01A
product
Price
£425
Containing the spray from a shower is made simple with the Portascreen shower guard.
Portable and easy to handle
Folds flat for storage
Hinged doors are easily positioned to provide maximum protection for the carer, when assisting in
the shower
Special sizes can be made to order. Extended delivery times apply
code
IDGPS02
IDGPS01
product
White Portascreen Shower Guard - 3 panel (1475mm) White Portascreen Shower Guard - 4 panel (2000mm) Price
£160
£180
description
Dimensions folded Fully extended length
Overall height
Weight
dimensions
530mm x 815mm (21” x 32”)
1474mm (4’ 10”)
815mm (32”)
9 kg
description
Dimensions folded
Fully extended length
Overall height
Weight
SYMBOLS: Bulk item
68
Made to order
dimensions
1000mm x 815mm (39” x 32”)
2000mm (6’ 7”)
815mm (32”)
12 kg
Panel 1 = 480mm
Panel 2 = 515mm
Panel 3 = 480mm
Panel 1 = 493mm
Panel 2 = 507mm
Panel 3 = 507mm
Panel 4 = 493mm
Tel: 01869 365500
Fax: 01869 365588
[email protected]
IMPRESSIONS COLLECTION
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
69
IMPRESSIONS COLLECTION RANGE
Clean contemporary lines with stunning brushed aluminium surrounds and clear toughened safety glass
for added strength and rigidity. A range of sizes is available with spacious shower enclosures. Enclosures
also available in ice white finish. Not suitable for wheeled shower chairs. The key below explains the
symbols used throughout the Impressions Collection section.
D640 Easy access shower kit contents
White shower tray, ramp, fixed panel enclosure and door (silver or white), curtain track and hooks/shower
curtain (half height door and enclosure only), assistance pole (half height door and enclosure only). Fitting
instructions.
W655/W760 Level access shower kit contents
White shower tray, fixed panel enclosure and door (half or full height), curtain track and hooks/shower
curtain (half height door and enclosure only), waste trap, tray edging cover strip & grab pole to curtain rail
(half height door and enclosure only). Fitting instructions.
S655/W760 Level access shower kit contents
White shower tray, fixed panel enclosure and door (half or full height), curtain track and hooks/shower
curtain (half height door and enclosure only), waste trap, tray edging cover strip & grab pole to curtain rail
(half height door and enclosure only). Fitting instructions.
Impressions Collection Pricing
product
Impressions Collection (All models)
colour
Silver & glass with brushed aluminium (or Ice white) surrounds
Including white shower tray
Price
£995
Not suitable for wheeled shower chairs.
The key below explains the symbols used throughout the Impressions Collection section.
Impressions Collection Level access shower trays (see pages 71-80)
Gravity waste
(Invawaste)
See pages 82-84 for
G1
G2
details
Whale Shower Drain
Pump Kit
See pages 85-89
G1.1
SPECIAL SHOWER TRAY
REQUIRED WITH THIS
OPTION - CONTACT
CUSTOMER SERVICES FOR
DETAILS.
Shower Waste Pump
P1
P1.1
P2
See pages 90-91 for comprehensive
details
KEY
SYMBOLS: Bulk item
70
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
IMPRESSIONS COLLECTION WALK-IN SHOWER RANGE W655
G1 G1.1
P1 P1.1
p70
P2 See
for key
W655 (Full height door)
W655 Shower Assembly
with full height door and full height panel
£995
tray description
W655 Left Hand
W655 Left Hand
Left hand tray
Right hand door
colour door hand tray size Silver Right
1165 x 720mm
White Right
1165 x 720mm
code
00-060111401
00-060113401
NOTE: SHOWER TRAY IS INCLUDED AS PART OF THE KIT CODE SHOWN ABOVE
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
tray description colour
W655 Right Hand Silver W655 Right Hand White Right hand tray
Left hand door
door hand tray size
Left 1165 x 720mm
Left 1165 x 720mm
code
00-060131401
00-060133401
W655 (half height door)
G1 G1.1
P1 P1.1
p70
P2 See
for key
with half height door and half height panel
£995
W655 Left Hand Silver W655 Left Hand White Left hand tray
Right hand door
door hand Tray size
Right
1165 x 720mm
Right
1165 x 720mm
code
00-060111402
00-060113402
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
SYMBOLS: Bulk item
Made to order
Left hand door
door hand Tray size
Left 1165 x 720mm
Left 1165 x 720mm
code
00-060131402
00-060133402
Tel: 01869 365500
Fax: 01869 365588
[email protected]
71
IMPRESSIONS COLLECTION WALK-IN SHOWER RANGE W760
£995
tray description
W760 Left Hand
W760 Left Hand
Left hand tray
Right hand door
colour door hand tray size Silver Right
1165 x 825mm
White Right
1165 x 825mm
£995
W760 Right Hand Silver W760 Right Hand White Left hand door
code
00-060211401
00-060213401
Right hand tray
G1 G1.1
P1 P1.1
p70
P2 See
for key
door hand tray size Left 1165 x 825mm
Left 1165 x 825mm
G1 G1.1
P1 P1.1
p70
P2 See
for key
code
00-060231401
00-060233401
G1 G1.1
P1 P1.1
p70
P2 See
for key
£955
W760 Left Hand Silver W760 Left Hand White Left hand tray
Right hand door
door hand tray size Right
1165 x 825mm
Right
1165 x 825mm
code
00-060211402
00-060213402
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
SYMBOLS: Bulk item
72
Made to order
Left hand door
Left 1165 x 825mm
code
00-060231402
00-060233402
Tel: 01869 365500
Fax: 01869 365588
[email protected]
IMPRESSIONS COLLECTION WALK-IN SHOWER S655
G1 G1.1
P1 P1.1
p70
P2 See
for key
S655 (Full height door)
S655 Shower Assembly
£995
S655 Left Hand Silver S655 Left Hand White Left hand tray
Right hand door
1850 x 715mm
Right
1850 x 715mm
code
00-090111401
00-090113401
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
S655 Right Hand Silver S655 Right Hand White Right hand tray
Left hand door
Left 1850 x 715mm
code
00-090131401
00-090133401
S655 (half height door)
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Right hand door
1850 x 715mm
Right
1850 x 715mm
code
00-090111404
00-090113404
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
SYMBOLS: Bulk item
Made to order
Left hand door
Left 1850 x 715mm
code
00-090131404
00-090133404
Tel: 01869 365500
Fax: 01869 365588
[email protected]
73
IMPRESSIONS COLLECTION WALK-IN SHOWER S655 (IN-LINE DOORS)
G1 G1.1
P1 P1.1
p70
P2 See
for key
S655 In-line doors for alcove
with in-line half height door and full height panel
£995
Right hand door
1850 x 715mm
Right
1850 x 715mm
code
00-090111402
00-090113402
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Left hand door
Left 1850 x 715mm
code
00-090131402
00-090133402
with in-line half height door and half height panel
£995
Right hand door
1850 x 715mm
Right
1850 x 715mm
code
00-090111403
00-090113403
£995
SYMBOLS: Bulk item
74
Made to order
Left hand door
G1 G1.1
P1 P1.1
p70
P2 See
for key
Left 1850 x 715mm
G1 G1.1
P1 P1.1
p70
P2 See
for key
code
00-090131403
00-090133403
Tel: 01869 365500
Fax: 01869 365588
[email protected]
IMPRESSIONS COLLECTION WALK-IN SHOWER RANGE S760
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Right hand door
1850 x 820mm
Right
1850 x 820mm
code
00-090211401
00-090213401
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Right hand tray
Left hand door
S760 Right Hand Silver S760 Right Hand White door hand tray size Left 1850 x 820mm
Left 1850 x 820mm
code
00-090231401
00-090233401
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Right hand door
1850 x 820mm
Right
1850 x 820mm
code
00-090211404
00-090213404
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
SYMBOLS: Bulk item
Made to order
Left hand door
Left 1850 x 820mm
code
00-090231404
00-090233404
Tel: 01869 365500
Fax: 01869 365588
[email protected]
75
IMPRESSIONS COLLECTION S760 (IN-LINE DOORS)
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Right hand door
1850 x 820mm
Right
1850 x 820mm
code
00-090211402
00-090213402
G1 G1.1
P1 P1.1
p70
P2 See
for key
£995
Left hand door
Left 1850 x 820mm
code
00-090231402
00-090233402
£995
Right hand door
door hand tray size Right 1850 x 820mm
Right
1850 x 820mm
code
00-090211403
00-090213403
£995
Right hand tray
SYMBOLS: Bulk item
76
Made to order
Left hand door
G1 G1.1
P1 P1.1
p70
P2 See
for key
S760 Right Hand Silver S760 Right Hand White door hand tray size Left 1850 x 820mm
Left 1850 x 820mm
G1 G1.1
P1 P1.1
p70
P2 See
for key
code
00-090231403
00-090233403
Tel: 01869 365500
Fax: 01869 365588
[email protected]
IMPRESSIONS COLLECTION EASY ACCESS SHOWER RANGE D640
D640 (waste position A)
D640 Shower Assembly
with full height door and panel
£995
G2
P2
See p95
for key
Any of the door layouts shown left can be made from the same code. Just select silver or white.
D640 Waste A
Silver D640 Waste A
White Option A
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020041404
00-020043404
£995
G2
P2
See p95
for key
Option A
Left hand door
D640 Waste A
Silver D640 Waste A
White door hand tray size Left 1135 x 700mm
Left 1135 x 700mm
code
00-020041403
00-020043403
with half height door and panel
£995
G2
P2
See p95
for key
D640 Waste A
Silver D640 Waste A
White Option A
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020041402
00-020043402
£995
G2
P2
See p95
for key
D640 Waste A
Silver D640 Waste A
White Option A
SYMBOLS: Bulk item
Made to order
Left hand door
Left 1135 x 700mm
code
00-020041401
00-020043401
Tel: 01869 365500
Fax: 01869 365588
[email protected]
77
IMPRESSIONS COLLECTION EASY ACCESS SHOWER D640
D640 (waste position B)
£995
G2
P2
See p95
for key
D640 Waste B
Silver D640 Waste B
White Position B
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020051404
00-020053404
£995
G2
P2
See p95
for key
D640 Waste B
Silver D640 Waste B
White Position B
Left hand door
Left 1135 x 700mm
code
00-020051403
00-020053403
£995
G2
P2
See p95
for key
Position B
Right hand door
D640 Waste B
Silver D640 Waste B
White door hand tray size Right
1135 x 700mm
Right
1135 x 700mm
code
00-020051402
00-020053402
£995
G2
P2
See p95
for key
D640 Waste B
Silver D640 Waste B
White Position B
SYMBOLS: Bulk item
78
Made to order
Left hand door
Left 1135 x 700mm
code
00-020051401
00-020053401
Tel: 01869 365500
Fax: 01869 365588
[email protected]
D640 (waste position C)
£995
G2
P2
See p95
for key
D640 Waste C
Silver D640 Waste C
White Position C
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020061404
00-020063404
£995
G2
P2
See p95
for key
D640 Waste C
Silver D640 Waste C
White Position C
Left hand door
Left 1135 x 700mm
code
00-020061403
00-020063403
£995
G2
P2
See p95
for key
D640 Waste C
Silver D640 Waste C
White Position C
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020061402
00-020063402
£995
G2
P2
See p95
for key
D640 Waste C
Silver D640 Waste C
White Position C
SYMBOLS: Bulk item
Made to order
Left hand door
Left 1135 x 700mm
code
00-020061401
00-020063401
Tel: 01869 365500
Fax: 01869 365588
[email protected]
79
D640 (waste position D)
£955
G2
P2
See p95
for key
D640 Waste D
Silver D640 Waste D
White Position D
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020071404
00-020073404
£995
G2
P2
See p95
for key
D640 Waste D
Silver D640 Waste D
White Position D
Left hand door
Left 1135 x 700mm
code
00-020071403
00-020073403
£995
G2
P2
See p95
for key
D640 Waste D
Silver D640 Waste D
White Position D
Right hand door
1135 x 700mm
Right
1135 x 700mm
code
00-020071402
00-020073402
£995
G2
P2
See p95
for key
D640 Waste D
Silver D640 Waste D
White Position D
SYMBOLS: Bulk item
80
Made to order
Left hand door
Left 1135 x 700mm
code
00-020071401
00-020073401
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER TRAY WASTE OPTIONS
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
81
G1
GRAVITY WASTE (INVAWASTE)
Gravity waste (Invawaste)
See p44 for
Tray options
Designed for use on a timber floor installation - sits within void in joists.
90mm shower trap with 50mm water seal and removable waste.
For use with the following shower trays (gravity versions):
- Sandwell range (Included in standard package)
- Westdale range (Included in standard package)
Removable top cover and removable inner cup for routine cleaning and maintenance
code
IDMIV02
product
Gravity waste (chrome) - replacement part
Price
£30
GRAVITY WASTE DETAILS
exploded view
plan view
113mm
57mm
Non-Stick Seal
Flange
75mm
Removable
Inner Cup
cross section assembled
Locking Nut
Tapered Rubber Seal
Tray profile located
between the two
sealing rings
Rubber Seal
82mm
11/2" BSP
Shower
Trap Body
117mm
SYMBOLS: Bulk item
82
Made to order
135° Bend
11/2" "Multifit"
Tel: 01869 365500
Main body
90mm diameter
Fax: 01869 365588
[email protected]
G1
GRAVITY WASTE (INVAWASTE)
TYPICAL CROSS SECTION THROUGH LEVEL ACCESS
SHOWER TRAY - TIMBER FLOOR CONSTRUCTION
See p44 for
Tray options
Sandwell / Westdale
Level Access Shower Tray
6mm waterproof absed ply
19mm tongue & groove floor boards
B
A
C D
Joist
InvaWaste trap (with removable waste,
top accessible universal outlet)
135 degree
Trap may be turned to allow 135 degree knuckle bend knuckle bend
to rotate to allow waste pipe to exit horizontally through
the wall or through ceiling void
Recommended fall of waste pipe = 1:40
Cavity wall
construction
42mm (1 1/2”)
waste pipe
Underside of tray void
filled with foam
(flame retardant where required)
A = 175mm - typical 150mm joist
B = 70mm
C = 85mm
D = 75mm (invert level)
Typical dimensions
TYPICAL 3D SECTION THROUGH LEVEL ACCESS
SHOWER TRAY - TIMBER FLOOR CONSTRUCTION
Example Illustration shows Westdale 655/760 shower tray installation (left hand waste outlet)
Note position of waste over to left hand side
6mm water proof based ply
19mm tongue and groove
floorboards
Cavity wall
construction
Typical Sandwell/Westdale
Level access shower tray
Typical joist installation
450 or 600 c/c
150mm joist depth
42mm (1 1/2") waste pipe
routed to SVP
Invawaste positioned
within joist void.
Routable positioning
of trap to suit site conditions
SYMBOLS: Bulk item
Made to order
Gravity waste shown fitted
to underside of shower tray
Support noggins 38mm minimum thickness
(or at least half the depth of joist)
Tel: 01869 365500
Fax: 01869 365588
[email protected]
83
G1.1
GRAVITY WASTE (INVAWASTE) VERTICAL OUTLET
Gravity waste (Invawaste) vertical outlet
See p44 for
Tray options
90mm x 50mm Water seal with 1 1/2” Universal vertical outlet
Overall height 108mm
code
IDMIV04
product
Gravity waste - Vertical outlet
Price
£30
64mm
GRAVITY WASTE DETAILS
58.5mm
CP Plastic Grid
Gravity waste (Invawaste) vertical outlet
exploded view
24
110mm
87.5mm
Shower Tray
105mm
117mm
2" Outlet
G2
SHOWER TRAY - ABOVE FLOOR WASTE OUTLET
See p44 for
Tray options
Above floor waste - no need to remove the floor as
waste water discharge is above floor
Left or right hand
To be used in conjunction with a P/S trap
Included on Dovedale and Edale trays
H
H1
Edale MK2 pictured
Pipe diameter 1 1/2” (40mm)
Projection 45mm for coupling up
H=40mm
H1=80mm
Outlet pipe height to centreline
SYMBOLS: Bulk item
84
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
P1
PUMPED WASTE
Pumped waste
See p44 for
Tray options
Ideal application when a shower tray installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor.
For use with the following level access shower trays (pumped versions - low waste trays):
- Sandwell range
- Westdale range
Please contact the Technical Helpdesk for additional technical information
code
IDWWP05
IDWWP03
product
Whale automatic tray gulley kit
Price
£366
£35
WASTE GULLEY DETAILS
Waste Gulley exploded view
50mm diameter
inner cup
22mm/15mm speed fit connector
35mm
10mm
(to underside of collar)
15mm diameter pipe
to suit site conditions
50mm diameter lower cup
with 22mm side spigot
Important:
Dimension of 45mm (to underside of tray to be excavated to house waste collar)
Waste Gulley Plan view
41mm
119mm
Waste Gulley Cross section assembled
Tray profile located
between the inner locking
cup ring and the lower
sealing ring
Main body
50mm diameter
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
85
P1
PUMPED WASTE
See p44 for
Tray options
TYPICAL CROSS SECTION THROUGH LEVEL ACCESS
SHOWER TRAY - CONCRETE FLOOR CONSTRUCTION
Sandwell / Westdale Level Access
Shower Tray
A
Typical 50-75mm
screed
Typical 150mm
pre-cast concrete
Underside of tray
filled with foam
45mm approx. to suit
site conditions
A = 220mm
B = 35mm (45mm to underside of
main collar attachment)
Typical dimensions
B
Cavity wall
construction
15mm copper waste
pipe (to be routed away
from tiled area)
NOTE: When installing use silicone on top of
seal when positioning beneath the tray to
ensure correct sealing.
Pumped waste shown fitted to
underside of shower tray
Cross sectional view showing fitting of the Sandwell/
Westdale tray with the waste outlet
Sandwell/Westdale
shower tray
The waste outlet sits
within the screed
Silicone seal applied
on waste underneath tray
Channel in floor
for waste outlet
and pipe
15mm copper waste pipe
Whale Automatic
Pumped Drainage
Typical screed finish floor construction
Shower base footprint
Notes:
Dashed lines indicate alternate routes (these may vary other than those shown, dependent on site conditions)
Tray to be recessed into the finished screed level - 20mm depth
(Full installation instructions available at www.chilterninvadex.co.uk or by contacting the Technical Department)
SYMBOLS: Bulk item
86
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
P1
PUMPED WASTE
See p44 for
Tray options
Flow switch and ‘Y’ filter
code
IDWWP03
product
Price
£35
Important:
An additional flow switch is required for a shower mixer valve installation connected into the hot water supply.
The switch may be positioned horizontally or vertically.
The arrow indicated
on the flow switch shows
the direction of the water flow
To transformer
15mm copper pipe/150mm length
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
87
P1.1
PUMPED WASTE
See p44 for
Tray options
Pumped waste suitable for
concrete floor construction
TM
(Whale Instant Match for use with Mira Advance Extra)
Ideal application when a shower tray installation is required and it is not possible to utilise a gravity version due to the depth of a typical gravity trap. The Whale waste outlet and pipework can be sited into the screed requiring only a 45mm depth, therefore unaffecting a typical in-situ RC suspended floor and/or pre-cast concrete floor.
Quiet gulley
For use with the following level access shower trays (pumped versions - low waste trays):
- Sandwell range
- Westdale range
Please contact the Technical Helpdesk for additional technical information
Important note: The Whale Instant Match pump/tray gulley kit can only be used with the Mira Advance Extra or
Mira Advance Flex Extra. This is a different shower unit to the standard Mira, incorporating an internal shower flow
sensor.
TM
code
IDWWP07
product
Pump/Tray gulley kit for use with Mira Advance Extra shower unit. colour
White Price
£396
Cross sectional views/dimensional information is shown on page 86.
Mira Advance Flex Extra
Designed for use with the Whale Instant Match (shown above)
 Internal Shower Flow Sensor measures the flow rate going to the shower head. The Whale Instant Match automatically adjusts the pump speed in relation to the flow rate of the Mira Advance Extra Shower.
Mira Advance ATL 9Kw electric shower has a push button stop and flow controls which are
independent of the temperature dial
Safe showering with precise thermostatic control for constant water temperature
ATL - Adjustable Temperature Limit for added safety
Instantly heats water to guarantee a hot shower every time
New fittings - smooth slide bar with easy glide operation
Tactile push button flow controls for ease of use
2 Year guarantee
RNIB approved
BEAB caremark
 Features an extended temperature control lever, 2m hose and additional handset holder for flexible showering heights.
code
IDWMA05AE
SYMBOLS: Bulk item
88
Made to order
product
Mira Advance Flex Extra Thermostatic shower unit Tel: 01869 365500
Fax: 01869 365588
[email protected]
Price
£384
P1.1
PUMPED WASTE
See p44 for
Tray options
TM
Whale Instant Match for use with Mira Advance Extra
The Whale Instant MatchTM automatically adjusts the pump speed in relation to the flow rate of the Mira Advance Extra
Shower, as illustrated below.
Internal Shower Flow 1
Sensor measures the
flow rate going to the
shower head
The flow rate information 2
is sent via a cable to the
Whale Instant Match
Transformer
TM
3
Whale Instant Match
Transformer increases and
decreases the speed of the
pump dependent on the
shower flow rate
TM
For illustration purposes only
Matching the pump
flow rate to the shower
flow rate ensures that
gulley suction noise is
minimised
4
TM
WHALE INSTANT MATCH
KEY BENEFITS
Quiet gulley
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
89
P2
SHOWER WASTE PUMP
See p44 for
Tray options
Shower waste pump kit
Where access to drainage is difficult a shower waste pump allows
waste water to be pumped away, without the need to rely on a gravity fall
Suits all Chiltern Invadex shower trays (except Cardale which comes with its own pump)
Quiet and filterless low voltage pump (12v)
Simple to install and maintain
Audible alarm to indicate blockages
Pump lid snaps on and is easily removed for routine cleaning and maintenance
Kit illustrated
Shower waste pump kit compatibility selector
TRAY DESCRIPTION
TYPICAL TIMBER
FLOOR CONSTRUCTION
Level Access
Sandwell MK3 655

Sandwell MK3 760

Westdale 655

Westdale 760

Westdale 1000

Cardale MK2

Easy Access
Dovedale MK2

Edale MK2

Shown recessed
TYPICAL CONCRETE/SCREED
FLOOR CONSTRUCTION








Shown surface mounted
code
115-00001
product
Standard Pump Kit
Price
£395
Package includes wiring block - which controls the pump manually, pump and necessary fittings
& connections to the above floor outlet or Invawaste
Technical Information
Notes: Flexi-pipe supplied (40mm) for flow into box. Flow outlet from box is 22mm
Maximum 15 litres/min drainage (dependent on type of shower tray)
Case constructed from white flame retardant ABS
Side and end elevation
Plan elevation
22mm
Outlet to drain
275
mm
185mm
160
mm
125mm
1 1/2" (40mm)
Inlet from tray
SYMBOLS: Bulk item
90
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
P2
SHOWER WASTE PUMP
See p44 for
Tray options
Notes:
Typical stack detail, waste hose running
into standpipe with P-trap. Waste pipe
laid is suitable gradient before running
into hopper head, gulley or SVP.
Please note:
Chiltern Invadex can supply an automatic version of the Shower Waste
Pump kit shown above. Please contact the Technical Helpdesk for
assistance.
Typical installation utilising washing
machine type waste
Maximum height from base of box to top of
standpipe 711mm (28”) down to a minimum
height of waste discharge 508mm (20”) will give
maximum efficiency of the pump, with a suitable
down gradient slope.
711mm
MAX
508mm
MIN
pump
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
91
P3
SHOWER TRAY INTEGRAL WASTE PUMP
Shower tray Integral waste pump
(Included with Cardale tray)
See p44 for
Cardale Tray
options
Where access to drainage is difficult a Shower tray Integral waste pump
allows waste water to be pumped away, without the need to rely on a gravity fall
Supplied complete with cover, easily removed for routine cleaning and maintenance
Quiet and filterless low voltage pump (12v)
Simple to install and maintain
Audible alarm to indicate blockages
Stud wall minimum width - typically 75mm minimum to house 40mm stack pipe.
Cardale MK2 shown left with 12v wiring block, integral pump, rewire lead and cover
Typical installation utilising washing
machine type waste
Maximum height from
base of box to top of
standpipe 711mm (28”)
down to a minimum
height of waste discharge
508mm (20”) will give
maximum efficiency of
the pump, with a suitable
down gradient slope.
711mm
MAX
508mm
MIN
pump
Notes:
Typical stack detail, waste hose running
into standpipe with P-trap. Waste pipe
laid to suitable gradient before running
into hopper head, gulley or SVP.
SYMBOLS: Bulk item
92
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
WET ROOM DRAINS & PUMPS
Wet floor kit
Allows water to be pumped away on a wet floor installation where conventional drainage is difficult
Should be used on a concrete floor where the whole bathroom is to be a wet area
Designed to be mounted in the corner with the floor graded down to it.
Quiet, safe 12 volt pump quickly and efficiently pumps waste water away to a typical washing machine type stack
Float switch activates alarm in wiring block to indicate a surge in water flow
Easy to install with the minimum of structural disruption within most screed levels
Tough durable GRP for long lasting appearance
Wiring block controls pump, shower and extractor fan from one electrical source
code
SHWFKIT2
product
Wet Floor Kit
quantity
single unit
Price
£415
Kit contains: Flexible drain hose, Wiring block, 12 volt pump, Pump lead, Corner dish, Corner cover, Cover mounting brackets, plugs, screws & base, clamping plate
Corner detail for floor removal for corner dish
Exploded view of components
Remove floor to a
depth of 30mm
m
5m
23
Clamping plate locks and bonds
Altro flooring firmly into position
35mm
Remove floor to a
depth of 5mm
Wall
Installed components
Installed complete
12V
wiring block
Maximum
4 metres
Rewire lead
2 metres
Corner cover
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
93
WET FLOOR DRAINS AND PUMPS
Invaflo Shower Drain
Provides an alternative to metal drains and gullies. An Ideal shower drain for whole floor shower areas
Moulded from tough and resilient non-corroding GRP (glass reinforced plastic) material
Featured as standard, an all plastic clamping plate, with easy access waste trap which is easily cleaned during routine maintenance
Easy to install
Clamping plate for PVC floor membrane
Built in gully with surface access trap
No earth bonding required under electrical regulations
Supplied with trap/grid
code
IDIIF10W
product
1000mm x 225mm x 100mm depth supplied with trap and grid
Price
£220
Note: This drain is designed for use on concrete floors. It is NOT advisable to install the drain on wooden floors.
Additional lengths are available to special order, please call for details.
CROSS SECTION THROUGH
INVAFLO GRAVITY WASTE
Invaflo gravity waste
plan view
exploded view
96mm
Mesh cover
Non-stick seal
Flange
Removeable inner cup
cross section assembled
Locking nut
Tapered rubber seal
Rubber seal
1 1/2” BSP
82mm
1000mm
115mm
255mm
1 1/2”- “Multifit”
940mm
198mm
117mm
Shower trap
body
135° bend
110mm
SYMBOLS: Bulk item
94
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWERING ACCESORIES
SHOWER SEATS
GRAB RAILS
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
95
SHOWER SEATS
Flat padded shower seat with legs
Maximum Load 200kg (31 stones) (440lb)
For use with shower trays and in wet floor areas
Can be folded away when not in use
Electrostatic powder coated stainless steel frame
Comfortable soft padded seat
Hygienic, rot proof material
Easy fit
Adjustable leg height
Available with horseshoe or full ring aperture (see page 99 for sizes)
code
TUW13BL
product Price
Flat Padded Seat Large 18”/457mm with Folding Legs £210
Padded horseshoe and padded aperture shower seats available to special order. Price on application.
Technical information TUW13BL
615
Diam 16
Centres 280
special order 407-458
standard leg 458-509
390
480
145
220
Extra width flat padded shower seat with legs
Durable stainless steel frame
Available with horseshoe or full ring aperture (see page 99 for aperture sizes)*
code
product Price
TUW14L
Extra Width Flat Padded Seat 34”/865mm - Side Transfer, with Folding Support Legs
£285
TUW15L (not shown) Extra Width Flat Padded Seat 24”/600mm- Side Transfer, with Folding Support Legs
£285
*Padded horseshoe and padded aperture shower seats to special order. Price on application.
SYMBOLS: Bulk item
96
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER SEATS
Nylon reinforced PVC shower seat with legs
 Durable PVC seat
code
TUW18
product Price
Nylon Reinforced PVC Seat with Folding Support Legs £139
615
425
Diam 16
Centres 280
445
special order
standard leg
special order
500
390
407-458
458-509
509-560
220
160
Nylon reinforced PVC shower seat
with backrest, folding arms and legs
Durable PVC seat
product Price
Nylon Reinforced PVC Seat with Folding Support, Legs & Arms, Fixed Backrest £210
code
TUW19
395
615
310
16 Diam
Centres 280
425
510
530
standard leg 458-509
390
500
220
SYMBOLS: Bulk item
Made to order
145
Tel: 01869 365500
Fax: 01869 365588
[email protected]
97
SHOWER SEATS
Flat padded shower seat with backrest, folding
arms and legs
Available with horseshoe or full ring aperture (see page 99 for sizes)*
code
TUW19P
product
Price
Flat Padded Seat with Folding Legs & Arms, Fixed Backrest
£275
*Padded horseshoe and padded aperture shower seats to special order. Price on application.
395
615
16 Diam
centres 280
260
450
425
530
special order
standard leg
special order
407-458
458-509
509-560
390
480
220
195
Surefix wall mounting kit
Easily attached to a wall
Allows Chiltern Invadex shower seats to be attached to timber studwork, soft blockwork or masonry walls
Ensures a safe, secure fixing
code
product
Price
CHSFX
Surefix Fixing Kit £134
The Surefix kit locates
using coach screws
supplied.
SYMBOLS: Bulk item
98
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER SEATS
64mm
76mm
64mm
445mm
445mm
64mm
115mm
266mm
165mm
395mm
394mm
240mm
64mm
120mm
210mm
90mm
64mm
445mm
395mm
445mm
395mm
445mm
445mm
395mm
76mm
445mm
82mm
197mm
210mm
394mm
165mm
64mm
395mm
120mm
395mm
82mm
600mm
860mm
Budget Seat Range
 127kg (20 stone) weight limit
Available with or without backrest and arms
Available with or without padding
 Folds up against the wall when not in use
code
IDVB634 IDVB532
IDVB535 IDVB539
SYMBOLS: Bulk item
Made to order
product
Seat with legs (padded seat)
Seat with legs (no pads)
Seat with legs, armests & back (padded seat & backrest)
Seat with legs, armrests & back (no pads)
Tel: 01869 365500
price
£102
£89
£210
£189
Fax: 01869 365588
[email protected]
99
GRAB RAILS
Console hinged arm support
Safe working load 245kg (40 stone)
subject to safe working load of hinged arm
Includes clamps/cover plate
Recommended when wall mounting of the hinged arm support is not possible or desirable
Suitable for use with any of the hinged arms detailed below
RAL9010 White
code
IDVY307
product
Console for hinged arm
price
£130
215
Hinged arm
110
600 / 650 / 775
Locks automatically in the upright position
Finished in tough white epoxy
Aluminium backing plate
Also available with support leg (see below)
79
105
256 320
135
O8.5
code
IDVY300
IDVY301
IDVY302
product
Hinged arm support - Length 775mm Hinged arm support - Length 650mm Hinged arm support - Length 600mm
price
£85
£83
£83
Hinged arm complete with height adjustable support leg
Adjustable leg support
code
IDVY304
IDVY305
IDVY306
product
Hinged arm c/w support leg - Length 775mm
price
£130
£130
£130
Hinged arm
Also available with support leg (see IDVY423)
code
IDVY424
SYMBOLS: Bulk item
100
Made to order
product
Hinged arm - Length 750mm
Tel: 01869 365500
Fax: 01869 365588
[email protected]
price
£45
GRAB RAILS
Ribbed grab rail
An attractive durable grab rail ideal for volume use.
Constructed from uPVC with ABS flanges
Ribbed tube for improved grip
Flanges have 5 different fixing point to aid installation
Reinforced fixing points
Flange cover caps
55
300/ 450/600
35
90
5 fixing centres
code
IDVY425
IDVY426
IDVY427
product
Ribbed grab rail - Length 300mm
price
£24
£26
£28
Ripple grab rail
An attractive durable grab rail ideal for volume use.
Constructed from injection moulded ABS with reinforced
aluminium inner
60
300/ 450/600
90
33-36
5 fixing centres
code
IDVY386
IDVY387
IDVY388
product
Ripple grab rail - Length 300mm
price
£24
£26
£28
Ribbed grab rail for visually impaired
Available in red or blue - colours proven to aid the
partially sighted
Constructed from uPVC with ABS flanges
Ribbed tube for improved grip
Colour co-ordinated flange cover caps
60
300/ 450/600
32
90
5 fixing centres
code
IDVY448
IDVY449
IDVY450
IDVY451
IDVY452
IDVY453
product
Blue grab rail - Length 300mm
Red grab rail - Length 300mm
price
£24
£26
£28
£24
£26
£28
Brushed stainless steel grab rail
Constructed from stainless steel
Suitable for both indoor and outdoor use
code
IDVY399
IDVY399B
IDVY399E
SYMBOLS: Bulk item
Made to order
product
Brushed steel grab rail - Length 300mm
Tel: 01869 365500
price
£24
£26
£28
Fax: 01869 365588
[email protected]
101
BATHS
SYMBOLS: Bulk item
102
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
BATHS
The AccessMaster 3000 has a seat that can be raised or lowered to provide the perfect transfer height, rotated and gently
lowered into the bath water. Ideal for carer assisted or independent bathing.
AccessMaster 3000 Easy transfer bath
(Left hand seat position)
Maximum Load 150kg (24 stones)(330lb)

White bath in 1500mm or 1700mm length options

Transfer into the bath in 3 easy steps

Powered traverse

Left or right hand option to suit room layout

Battery back-up as standard
code
BAC1700LPT
BAC1500LPT
product
White Bath (1700mm)
White Bath (1500mm)
traverse Price
Powered £3675
Powered
£3675
Includes white Bath, Front Panel, Seat with independent arms, (Taps are not included - see Lever Taps page 105).
A commissioning fee of £105 is applicable. A £125 delivery charge applies. Bath is only available in White.
AccessMaster 3000 Easy transfer bath
(Right hand seat position)
Maximum Load 150kg (24 stones)(330lb)

White bath in 1500mm or 1700mm length options

Transfer into the bath in 3 easy steps

Powered traverse

Left or right hand option to suit room layout

Battery back-up as standard
code
BAC1700RPT
BAC1500RPT
product
White Bath (1700mm)
White Bath (1500mm)
traverse Price
Powered
£3675
Powered
£3675
Includes white Bath, Front Panel, Seat with independent arms, (Taps are not included - see Lever Taps page 105).
A commissioning fee of £105 is applicable. A £125 delivery charge applies. Bath is only available in White.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
103
BATHS
AccessMaster 3000 bath accessories
code
BACSPA
BACNARM
BACHPANEL
BACENDPANEL
BACEFPANEL
BACWASTE
product
description Price
6 Jet whirlpool Warm air spa (cannot be retro fitted)
£860
Nursing arms
£177
Hoist access panel
(Cut out in front panel for mobile hoist access - to suit Peninsular layout) £221
End panel £114
Front panel (one front panel supplied as standard) £142
Waste & overflow £30
Lap strap £P.O.A
Front panel
640mm
Mobile hoist
access panel
(option)
1500mm
1700mm
Nursing arms option
End panel
145mm
RIGHT
HAND
Bath handing
1380mm
745mm
372.5
A
C
B
LEFT
HAND
210
1500mm or 1700mm
WASTE
810
430
(bath
depth)
455
Lifting Heights
SYMBOLS: Bulk item
104
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
BATHS
Bath panel (layout options)
Mid wall
1 front & 2 end panels (extra
charge applies for 2 end panels)
Corner
1 front & 1 end panel (extra
charge applies for end panel)
Peninsular
2 front & 1 end panel (extra
charge applies for second front
panel & end panel)
Island
2 front & 2 end panels (extra
charge applies for second front
and two end panels)
BATHS & TAPS
Basin & bath taps
Basin (15mm) and bath (22mm) taps
76mm (3”) easy turn levers
code
IDSEN01
IDSEN02
product Price
Basin Hot/Cold Pair
£55
Bath Hot/Cold Pair
£63
Note: There is a minimum pressure requirement for these taps of 0.5 bar.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
105
TOILETS & TOILET SEATING
SYMBOLS: Bulk item
106
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
AUTOMATIC WC SHOWER TOILET
Chair compatible
For a selection of Palma
Vita compatible chairs
refer to p112 & p117)
Flushing
Washing
Drying
Clos-o-Mat Palma Vita
Provides ‘hands free’ automatic flushing, warm water washing and warm air drying
 User friendly for people who have restricted use of their hands
 By reducing hand contact it also provides improved hygiene for all users
 WRAS approved product
Accessories include touch sensitive switch for those unable to use standard elbow pads. Air operated, floor or wall mounted.
Raising plinth for use with a shower chair (recommended max 50mm) or to ease direct wheelchair
transfer. Manufactured in white plastic - heights 25, 50, 75, 100mm
 Robust and secure support arms. Folds out of the way to aid side transfer from a wheelchair
Extended douche - twin spray (female use only) or single extended douche
Optional lateral body supports for extra support and stability
code
IDTCS11 product
Palma Vita WC Single Spray (Including commissioning & delivery) from
Price
£2530
Please note: Palma Vita price includes any Douche arm (standard single spray, extended single spray, or twin spray) delivery and commissioning.
UK mainland only.
Palma Vita Accessories
code
IDPVTCS05
IDPVTC10
IDPVTCS02
IDPVTHP01
IDPVTHP02
IDPVTHP03
IDPVTHP04
IDPVTC15
IDPVTCS04
IDPVTCS06
IDPVTCS07
IDPVTC12
IDPVTC13
IDPVTC14
product
Integrated fold-down support arms - independent arms (Load tested to 25 stones)
Lap strap
Touch sensitive hand/foot switch Shaped plinth (25mm)
Shaped plinth (50mm)
Lateral body supports (clip in to support arms - order support arms with this option)
Standard soft seat ‘adult’*
Junior soft seat* (for clients who may slide through a standard seat)
Open fronted soft seat*
Palma wall infill panel
Remote control
Back bar (kit)
Price
£317.90
£49.50
£187
£72.60
£72.60
£72.60
£72.60
£165
£99
£99
£99
£108.90
£308.90
£99
*Note: only available in blue
Touch sensitive switch
SYMBOLS: Bulk item
Made to order
Raising plinth
Support arms
Tel: 01869 365500
Lateral body
supports
Extended douche arm
Fax: 01869 365588
[email protected]
107
AUTOMATIC WC SHOWER TOILET
Extended douche option access
Diagram A
450
165 ctr
245
200
75
70
730
60
95
35
269.5
to floor
420
450
210
165 ctr
See diagram A
See diagram A
730
850
75
95
95
410
317
220
317
B
c1 70-250
B
240
620
300
Electrical services
·
·
Electrical installation should be in accordance with I.E.E. Regulations (Current Edition).
220v/240v single phase AC supply is required, (fuse loading 6 to 8 amp, maximum power 1500 watts). The Clos-o-Mat is supplied with 3 core cable
attached. A fused spur is required.
·The spur outlet is normally located adjacent to the unit preferably R.H.S. facing.
Bathroom/Shower Room Installations
·
·
·
·
Particular attention should be paid to I.E.E. Regulations when the unit is to be fitted in a bathroom or shower area. We recommend isolation external to
the room.
I.E.E. Regulations require a Residual Current Device to be fitted to the circuit to ensure that disconnection occurs within 0.4 seconds in the event of earth
fault.
The Clos-o-Mat must not be in direct line with the shower spray. Some form of partition between shower and Clos-o-Mat is advisable to prevent any
water spraying directly on to the equipment.
A shower should not be used in conjunction with the Clos-o-Mat. i.e. Under NO circumstances must a user shower whilst seated on Clos-o-Mat.
Water services - No external hot water supply is required.
·
Cold water service only; water supply can be from level storage or mains. The Clos-o-Mat is supplied with 15mm copper spigot and isolating valve on
cold water supply
Soil Connection
·
Outlets are suitable for ‘P’ trap through the wall (220mm floor to centre) or ‘S’ trap through the floor (70mm–250mm finished wall to centre). Suitable for
left hand and right hand turned trap applications
Overflow
·The Clos-o-Mat has an internal overflow which discharges into the W.C. pan through the flush valve.
Further Notes
·
·
·
No permanent hand rails or other obstructions should be fitted across the front or top of the unit. The white outer case has to be pulled upwards and
forward to remove for service access.
If extended douche option is specified, space must be made to accommodate douche arm which extends beyond rear of casing.
Optional infill panel available to avoid need to chase wall. Unit can be fitted away from rear wall if required.
SYMBOLS: Bulk item
108
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
TOILET RAISER
Toilet raiser
The WC raiser is a plinth which raises the toilet pan by 50mm (2”) or 100mm (4”)
Easily secured in place below the W.C. pan.
code
IDIPR01
IDIPR03
IDIPR13
IDIPR15
IDIPR17
IDIPR19
product
WC Raiser White 100mm (4”) High (to suit Twyfords Civic & Classic & Armitage Shanks Magnia)
WC Raiser White 50mm (2”) High (to suit Twyfords Civic & Classic & Armitage Shanks Magnia)
WC Raiser White 100mm (4”) High (to suit Sandringham MK2)
Price
£59.00
£54.00
£60.00
£53.00
£59.00
£54.00
Notes: Available in white only.
Toilet raisers are not recommended for use in Shower Cubicles.
360mm
280mm
430mm
200mm
225mm
210mm
To fit Twyfords Civic &
Classic
Armitage Shanks Magnia
Pt No: IDIPR01/IDIPR03
SYMBOLS: Bulk item
Made to order
To fit Armitage Shanks
Sandringham Mk2
To fit Armitage Shanks
Sandringham ‘6’
Tel: 01869 365500
Fax: 01869 365588
[email protected]
109
TOILET SEATING
Raised padded toilet seats - full ring
To fit standard toilet pans. Includes metal fixings - Colour: white
Soft, comfortable range for those who require a side transfer facility
Strong, durable materials reduce the risk of skin damage whilst toileting
code
CHCS086MWHIT
CHCS086LWHIT
product Price
Padded Toilet Seat, Extra Soft - Full Ring 6 1/2” (165 mm) Aperture Width c/w stainless steel fixings £99
Padded Toilet Seat, Extra Soft - Full Ring 8 1/4” (210 mm) Aperture Width c/w stainless steel fixings £99
395mm
(151/2”)
35mm
410mm
(161/4”)
165mm
(61/2”)
Large 210mm
(81/4”)
230mm
(9”)
90mm
(31/2”)
50mm (2")
uncompressed
Raised padded toilet seat with horseshoe
To fit standard toilet pans. Includes metal fixings - Colour: white
Soft, comfortable range for those who require a side transfer facility
Strong, durable materials reduce the risk of skin damage whilst toileting
code
CHCS085LWHIT
product Price
Padded Toilet Seat, Extra Soft - Horseshoe 81/4” (210 mm) Aperture Width c/w stainless steel fixings £99
395mm
(151/2”)
35mm
210mm
(81/4”)
380mm
(15”)
300mm
(12")
100mm
(4”)
SYMBOLS: Bulk item
110
Made to order
Tel: 01869 365500
50mm (2")
uncompressed
Fax: 01869 365588
[email protected]
SHOWER CHAIRS
SHOWER TROLLEYS & STRETCHERS
SHOWER CRADLES
PAEDIATRIC RANGE
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
111
SHOWER CHAIRS - TRANSAQUA
The TransAqua range of shower commode chairs has been developed to provide a modular bathing and toileting solution which can be easily
adapted to alter with the user. The chairs innovative modular design allows each component to be retrospectively replaced as the users needs
change. Seats, armrests and footrests are interchangeable, the width of the frame can be increased/decreased* and the chair can be converted from self propelled to attendant propelled and vice versa.
* replacement backrest, cross member and seat required.
Main Features
 Safe working load 200kg (31st) (440lb)
 The chair features a stainless steel frame with corrosion resistant wheels and castors.
 Armrests and footrests swing away to aid transfer.
 Several footrest options are available, each is height adjustable to ensure that the user is in a comfortable position.
 Seats are available as flat padded, full ring aperture or horseshoe with a range of aperture sizes to suit the user.
 Can be used over a toilet or provided with a commode pan and cradle.
 19” and 21” chairs are Clos-o-mat compatible.
 Self propelled models can be provided with 20”, 22” or 24” wheels.
 Attendant propelled models are provided with four braked castors, directional locking castor available on request.
Self Propelled
Self propelled Models
code
TA18SP
TA19SP*
TA21SP*
product
TransAqua Self Propelled TransAqua Self Propelled TransAqua Self Propelled Attendant propelled Models
code
TA18AP
TA19AP*
TA21AP*
product
TransAqua Attendant Propelled TransAqua Self Propelled TransAqua Attendant Propelled
Attendant Propelled
seat options Price
Horseshoe, Aperture, Flat Padded Seat 18” (450mm)
from £480
from £480
from £649
seat options Price
from £353
from £353
from £579
* 19” and 21” TransAqua chairs are Closomat compatible, a seat skirt should be requested at time of order. See also AquaMaster C range
for alternative Closomat compatible chair page 45.
TransAqua Shower chair optional extras
selection
Commode Pan Cradle & Fittings (Not suitable for use with Padded Flat Seat)
Commode Pan
Seat extended by 50mm
Increase seat height by 25mm
Chair supplied assembled
Seat skirt to suit Closomat Automatic Toilet
Price
£15
£27
£31
£26
£26
£11
Prices quoted above apply when ordered with a chair. The complete range of accessories is shown on pages 114 - 115. For spare parts refer to customer services
on 01869 365500 Opt 1
Chiltern Invadex shower chairs are available with a large range of options and accessories, allowing the chair to be configured to suit specific client requirements. An
electronic codebreaker and quick order form are available to help select the appropriate standard options. Please contact Customer Service for details or to arrange
a visit by a Technical Sales Representative. Additional charge applies for optional extras.
SYMBOLS: Bulk item
Made to order
112 (see P141 for details)
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Note: Dimensions are for guidance only. Self propelled dimensions are based on a 22” diameter wheel.
Self propelled
186
462 (18")
487 (19")
537 (21")
270
434(18")
459 (19")
510 (21")
970
710
523
417 (18")
442 (19")
492 (21")
279
690 (18")
715 (19")
765 (21")
1029
Attendant propelled
186
426
462 (18")
487 (19")
537 (21")
270
970
710
434 (18")
459 (19")
510 (21")
417 (18")
442 (19")
492 (21")
523
72
891
426
495 (18")
520 (19")
570 (21")
If a bespoke chair is required, please refer to the AquaMaster range on page 116
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
113
TransAqua shower chair accessories
Commode pan cradle
211-00513
Commode cradle
£15
Stainless steel
adjustable armrest
Adjustable from 160-275mm (from the seat)
for increased comfort and to suit a range of
disabilities.
Commode pan
201-00147
Commode pan (ROUND) £27
Footrests with toe straps
Used instead of standard footplates. Prevents
involuntary movements and protects the user/
carer against injury.
211-00522 Right hand
211-00523 Left hand £49
£49
Short Footrests
Used instead of standard footrests
where feet require support at a higher
level (18 and 90 degree options).
18 Degree
211-00528Left hand £28
211-00529Right hand
£28
90 Degree
211-00530Left hand £28
211-00531Right hand £28
211-00512 Left or Right hand
£82ea
Footrests with
heel straps
Provides additional support for feet. Prevents
the user from slipping off the back and falling
forwards.
£49
211-00521 Left hand£49
90 degree footrests
Use instead of standard footrests,
where space is limited, or if the users
posture requires feet to be positioned
closer to the chair frame
211-00526 Left hand£28
211-00527 Right hand£28
Side pads
1”, 2”, 3” options. Reduces internal width from
18” down to 12” (using a 3” side pad on each
side) offering additional support and flexibility
to suit user’s down to paediatric requirements (Note: only compatible with fixed
armrests, not height adjustable option)
201-00539 1” padding
201-00540 2” padding
201-00541 3” padding
Footrests with
heel straps/toe straps
Provides total support of feet against
involuntary movement
Made to order
Tel: 01869 365500
£76
£76
211-00525 Left hand 211-00524 Right hand Individual foot pad
Soft padded support to suit sensitive feet.
Clips over standard footplates.
CHCS057 Not handed
Does not include footrests
NOTE: Left hand and right hand are always determined as sitting in chair
SYMBOLS: Bulk item
£66
£66
£66
Fax: 01869 365588
[email protected]
£30 ea
TransAqua shower chair accessories
Waist strap
Padded foot tray
Soft padded support to suit sensitive feet.
Clips over standard footplates.
201-00136 450mm (18”)
203-00049 525mm (21”)
201-00113 Velcro type 201-00085 Buckle strap £17
£17
* CHCS027 x2 required
£5.50 ea
Head support
Attaches around both footrest holders. Provides support to the lower leg.
201-00146 Calf strap (to suit 18”) £10
203-00050 Waist strap (to suit 21”) £10
Prevents involuntary movement of upper
body/accidentally slipping out of chair.
201-00143 To suit 18” shower chair£57
£60
£94
Calf strap
Full support harness
Buckle or Velcro type options. Supports the
waist and prevents involuntary movement of
upper body/accidentally slipping out of chair.
Provides padded support for the users
head (fully adjustable to suit)
CHCS3051 Straight handle
£248
For spare parts, please refer to customer services on 01869 365500 opt 1.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
115
SHOWER CHAIRS - AQUAMASTER
The AquaMaster range of shower commode chairs provides a rigid one piece base frame with modular elements to allow easy replacement of
components to suit the users changing needs. Seats, armrests and footrests which are interchangeable. The chair also features a wide range
of accessories (see pages 52-53) and is available as a made to measure piece of equipment, specially manufactured at our Oxfordshire facility
to meet individual needs. The coated frame features an anti-microbial element which is proven to destroy 99.9% of harmful bugs including
MRSA.
Main Features
 Safe working load 200kg (31st) (440lb)
 The chair features a rigid one piece base frame.
 Removeable armrests and footrests swing away to aid transfer.
 Several footrest options are available, each is height adjustable to ensure that the user is in a comfortable position.
 Seats are available as flat padded, full ring aperture, horseshoe or side access with a range of aperture sizes to suit the user.
 Options extended seats and pressure relief foam.
 Can be used over a toilet or provided with a commode pan and cradle.
 Self propelled models can be provided with 20”, 22” or 24” wheels.
 Attendant propelled models are provided with four braked castors, directional locking castor available on request.
 Static model can be used over a toilet, in a shower or as a bedside commode with the addition of a commode pan and support.
 Each model can be manufactured as a bespoke, user specific model (subject to site survey) - see page 119 for special features list
A02 Static
A06 Attendant Propelled
A08 Self Propelled
A11 Self Propelled
Static Models
code
A02
A02
A02
product
AquaMaster Static Shower Chair AquaMaster Static Shower Chair
AquaMaster Static Shower Chair
description
price
from £193
from £255
from £411
description
price
from £327
from £364
from £551
Attendant Propelled Models
code
A06
A06
A06
product
AquaMaster Attendant Propelled
Self Propelled Models
code
A08
A08
A08
product
AquaMaster Self Propelled
description
price
from £397
from £464
from £628
code
A11
A11
A11
product
description
price
from £397
from £464
from £628
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER CHAIRS - AQUAMASTER CLOS-O-MAT
Designed in conjunction with Clos-o-mat, the AquaMaster C range of shower chairs has all of the main features of the popular AquaMaster
range, re-deveoloped to complement the Palma Vita automatic toilet.



Perfectly proportioned to suit the Clos-o-mat Palma Vita, including level seat and pram handle backrest
Skirted seat provided as standard
Bariatric bench has a safe working load of 55st
A02C Bariatric Bench
A06C Attendant Propelled
A11C Self Propelled
Static Bench Models
code
product
description
A02C
Bariatric bench
Horseshoe, Aperture, 24” (600mm)
A02CSPEC
Bariatric bench Complete with arms and backrest
Floor fixing kit for permanent fixing available, please call for details
price
from £585
POA
Attendant Propelled Models
code
A06C
A06C
A06C
product
description
Horseshoe or Aperture seat 17” (445mm)
price
from £390
from £420
from £650
description
price
from £520
from £560
from £750
Self Propelled Models
code
A11C
A11C
A11C
product
For paediatric range see page 132
For technical information refer to page 118
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
117
A02 Static Chair
A02C Bariatric Bench
17" 445
19" 480
21" 545
600
Rear view
260
985
Rear view
340
17" 395
19" 430
21" 495
500
450
415 445
535
585
510
17" 465
19" 500
21" 565
550
A06 Attendant Propelled Chair
17" 445
19" 495
21" 545
A06C Attendant Propelled Chair
17" 445
19" 480
21" 545
Rear view
260
280
17" 390
19" 425
21" 490
500
415 445
A08 Self Propelled Chair
950
970
17" 390
19" 425
21" 490
440
17" 485
19" 520
21" 585
530
635
260
Rear view
985
965
530
260
420
17" 485
19" 520
21" 585
660
17" 445
19" 480
21" 545
Rear view
260
965
985
17" 360
19" 395
21" 460
500
260
415 445
17" 620
19" 655
21" 720
525
A11 Self Propelled Chair
A11C Self Propelled Chair
17" 445
19" 495
21" 545
17" 445
19" 480
21" 545
Rear view
260
965
260
440
SYMBOLS: Bulk item
Made to order
190
320
950
280
17" 385
19" 420
21" 485
500
Rear view
985
415 445
17" 635
19" 670
21" 735
Tel: 01869 365500
970
17" 385
19" 420
21" 485
440
260
700
Fax: 01869 365588
[email protected]
17" 690
19" 725
21" 790
420
AquaMaster Chair Special Features
selection
description
Price
Chair width
Available in custom widths
£141
Height
Raise or lower seat height (maximum increase +150mm/6”)
£105
Backrest options
Additional recline (upto10 degrees)
£28
Additional recline (over 10 degrees)
£83
Height change £39
Full height backrest material
£22
Full height backrest fabric (mesh)
£28
Backrest cushion (state thickness - 25, 50 or 75mm/ 1”, 2” or 3”)
£72
Seat options
Non standard seat
£270
Seat skirt* (for padded horseshoe and padded aperture seats only)
£35
Extra padding (maximum +25mm/+ 1”)
£39
Reduced or no padding £22
Dartex seat covering
£22
Side access seat extention by 50mm or 75mm
£36
Change aperture dimension
£39
Pressure relief foam
£22
* supplied as standard on Clos-o-mat chairs (A02C, A06C & A11C)
Armrest options
Height increased or lowered
£39
Length change
£39
Pair special soft pads
£61
Pair padded armrests (25, 50 or 75mm/ 1”, 2” or 3”)
£70
Pair gutter channel armrests£134
Front safety bar (includes special armrests)
£95
Cranked armrests
£26
Bolted in armrests
£47
Footrest options
Change footrest angle
£24
Double length footplate (pair)
£69
Velcro padding (per footrest)
£54
Raise footrest height
£39
Stump support (fixed, each)£150
The above list shows the most commonly requested special features, additional items are available please call customer services to discuss
specific requirements on 01869 365500 opt 1.
See also the standard range of accessories on pages 120-121
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
119
SHOWER CHAIRS
AquaMaster shower chair accessories
Commode cradle
CHCS3020
£15
Commode cradle
Short Footrests
Used instead of standard footrests
where feet require support at a higher
level (18 and 90 degree options).
Commode pan
201-00147
Round pan
£27
Footrests with
toe straps
Used instead of standard footplates.
Prevents involuntary movements and
protects the user/carer against injury.
211-00523 Left hand
211-00522 Right hand £49
£49
18 Degree
211-00528Left hand £28
211-00529Right hand£28
90 Degree
211-00530Left hand £28
211-00531Right hand £28
Footrests with
heel straps
Provides additional support for feet.
Prevents the user from slipping off the
back and falling forwards.
211-00521 Left hand 211-00520 Right hand £49
£49
90 degree footrests
211-00526 Left hand
£28
£28
Footrests with
211-00525 Left hand 211-00524 Right hand
£76
£76
Waist strap
Buckle or Velcro type options. Supports
the waist and prevents involuntary
movement of upper body/accidentally
slipping out of chair.
201-00113
203-00046
201-00085
203-00014
19” Chairs Velcro
21” Chairs Velcro
19” Chairs Buckle
21” Chairs Buckle
* CHCS027 x2 required
SYMBOLS: Bulk item
Made to order
£17
£17
£17*
£17*
Prevents involuntary movement of
upper body/accidentally slipping out
of chair.
201-00143 To suit all chairs
£57
Calf strap
Attaches around both footrest holders.
Provides support to the lower leg.
201-00146 19” Chairs
203-00050 21” Chairs
£5.50 ea
Tel: 01869 365500
Fax: 01869 365588
[email protected]
£10
£10
SHOWER CHAIRS
AquaMaster shower chair accessories
Pommel
Thoracic support
Fitted to the front of an aperture seat,
the Pommel reduces the risk of clients
sliding off the seat.
Provides lateral support to the users
trunk (adjustable)
201-00139 Pommel (small app)£91
201-00140 Pommel (medium app) £91
CHCS3040Pair
CHCS3041 Left hand
CHCS3042 Right hand
£289
£145
£145
Black foot support tray with adjustable footstraps (footstrap size options
available) c/w closed cell foam
footrest supports.
CHCS3050 To suit push handle £206
CHCS3051 To suit straight handle£248
CHCS049
CHCS049-1
CHCS049-2
Fitted across the front of the chair to
provide extra support to the user and
to prevent the risk of accidental fall
CHCS009 Front safety bar (includes special armrests)
£95
17” Foot tray 19” Foot tray
21” Foot tray
£83
£83
£83
£60
£72
£94
201-00136 450mm (18”)
CHCS3021 475mm (19”)
203-00049 525mm (21”)
Foot tray
Head support
Provides padded support for the
users head (fully adjustable to suit)
Front safety bar
Padded foot tray
Soft padded support to suit sensitive
feet. Clips over standard footplates.
Back pad
Provides additional padded back
support (17” wide only)
25/50/75mm thick options
CHCS3072
CHCS3071
CHCS3070
25mm (1”) 50mm (2”) 75mm (3”)
£88
£88
£88
Channel armrest
Fitted instead of standard armrests
to provide greater support to the
users forearm
£52ea
CHCS3060
Side pad
Provides extra padded side support
25/50/75mm thick options
CHCS3082
CHCS3081
CHCS3080
25mm (1”) 50mm (2”) 75mm (3”)
£70 ea
£70 ea
£70 ea
Individual foot pad
CHCS057 Not handed
£30 ea
For spare parts please contact customer services on 01869 365500 opt 1.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
121
SHOWER CHAIRS - AQUAMASTER TILT IN SPACE
AquaMaster Tilt in Space Shower & Toileting Chair
Designed and tested in conjuction with Occupational Therapists and healthcare professionals
Offers a safe, controlled and comfortable showering position for those with severe physical conditions
Full range of aperture, horseshoe and flat padded seats available
Option for bespoke seating, including pressure relief foam
Armrest, backrest and footrest options
Twin gas rams to ensure to ensure smooth reliable operation
Single hand control lever for ease of use
Stainless steel, powder coated construction for strength and durability
Corrosion resistant stainless steel and nylon bracked castors. Directional locking castor available.
Commode cradle options for round or oval pan types
 Paediatric model can be made available to special order, please call for details
code
A14
A15
A16*
A17*
product
AquaMaster Tilt in Space 18” frame AquaMaster Tilt in Space 21” frame 18” frame 90 degree backrest
21” frame 90 degree backrest
description
Price
from £899
from £950
from £899
from £950
*For use over toilet
Tilt in Space Shower chair custom made features
selection
description
Price
Chair width
Available in custom widths (please specify width)
£141
Height
Raise or lower seat height (state height, max + 150mm/6”)
£105
Backrest options
Additional recline (state angle of recline max 10 degrees)
£28
£83
Height change (state height required)
£39
£22
£28
£72
Seat options
Non standard seat
£270
Seat skirt (for padded horseshoe and padded aperture seats only)
£35
Extra padding (state thickness max +25mm/+ 1”)
£39
Reduced or no padding (state thickness) £22
£22
Side access seat extended by 50mm or 75mm
£36
£39
£22
Armrest options
Height increased or lowered (state height from top of seat)
£39
Length change
£39
£61
Pair padded armrests (state thickness - 25, 50 or 75mm/ 1”, 2” or 3”)
£70
Pair gutter channel armrests£134
Front safety bar (includes special armrests)
£38
Cranked armrests
£26
Bolted in armrests
£47
Footrest options
£24
Double length footplate (pair)
£69
£54
£39
Stump support (fixed, each)£150
Heel straps
£49
Toe straps
£49
Heel and toe straps
£76
Specialist
Thoracic supports (Ottobock) pair
£308
Adjustable, removable headrest (Ottobock)
£220
Chest and shoulder support harness (Ottobock)
£90
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER CHAIRS - AQUAMASTER TILT IN SPACE
A14 & A15
18” 568
21” 670
18” 545
21” 525
1440
1065
435
1380
280
1080
910
485
610
550
18” 420
19” 520
250
520
710
780
A16 & A17
1440
1065
1380
280
1130
1150
435
18” 568
21” 670
18” 545
21” 525
485
610
550
18” 420
19” 520
250
520
710
780
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
123
SHOWER CRADLES - TILT IN SPACE
Tilting Shower Cradle
Designed and tested in conjuction with Occupational Therapists and healthcare professionals
Offers a safe, controlled and comfortable showering position
Twin gas rams to ensure to ensure smooth reliable operation
Single hand control lever for ease of use
Stainless steel, plastic dip coated construction for strength and durability
Corrosion resistant stainless steel and nylon braked castors. Directional locking castor available.
Available with or without aperture
Easy drain mesh material which is removeable for cleaning
Bespoke options available, subject to survey
Range of accessories including head rests, lap straps and thoracic supports available
Shown with optional aperture and
quilted side rails
code
WASHCRADTISP
WASHCRADTISS
WASHCRADTISM
WASHCRADTISL
product
Tilting cradle (paediatric)
Tiliting cradle (small)
Tilting cradle (medium)
Tilting cradle (large)
Price
from £890
from £900
from £910
from £920
Tilt in Space Cradle custom made features
selection
description
Price
Frame
Width change
£141
Raise or lower seat height £105
Increase or reduce cradle length
£141
Fabric options
Add aperture (small, medium or large)
£40
Add non-standard aperture£65
Add lap strap/chest strap
£125
Side rails
Addition of side rails
£95
Enveloped rails
£150
Padded rails
£115
Quilted rails
£150
Specialist
Thoracic support rolls
£PoA
Adjustable, removable headrest support
£160
Dartex head cushion£100
Dartex knee support£85
Footboard
£121
Dartex pommel
£85
For full paediatric range see page 59
m
a
n
d
h
e
f
g
j
Reclined cradle with optional padded side rails
k
b
l
c
a
b
c
d
e
f
g
h
j
k
l
m
n
Paediatric
380
495
780
550
280
270
150
1005
885
650
410
820
1080
Small
500
510
780
620
280
400
150
1170
1020
660
300
820
1210
Medium
500
510
780
750
350
480
150
1260
1110
650
200
1120
1430
Large
575
575
780
900
400
570
150
1350
1200
640
150
1440
1740
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SHOWER CRADLES
Washington Shower Cradle
Safe, comfortable bathing for those with degenerative or severe physical conditions
Small, medium and large size options
Removable and washable cover to maintain hygiene levels
Adjustable to three positions to suit individual requiremements
Adjustable fabric to create a hammock effect for added safety
code
WASHCRADS
WASHCRADM
WASHCRADL productPrice
Washington Shower Cradle (Small)
£665
Washington Shower Cradle (Medium)
£675
Washington Shower Cradle (Large)
£685
Shower cradles custom made features
code
WASHCRADSPEC
productPrice
Frame change raised in height £95
Length or width change
£225
Side bars per/pair
£95
Envelope fabric
£150
Padding for envelope
£95
Additional lugs per pair
£95
Aperture in fabric £40
Velcro type chest strap (same as toileting sling)£125
Waist strap sewn to fabric£55
Fabric length change£95
Head cushion£160
Small
h1615
h2420
w500
b620
t280
c400
e140
f120
g120
x970
y1120
z 150
MediumLarge
615
615
470
470
500 575
750 900
350 400
480 570
150 180
150 170
150 170
1270 1590
1380 1690
150
150
SYMBOLS: Bulk item
Made to order
e
length (y mm)
reclined position
f
g
length (x mm)
upright position
w
b
c
z
h2
t
h1
Tel: 01869 365500
Fax: 01869 365588
[email protected]
125
Shower Trolley (hydraulic/electric)
Clients can be showered and dried without manual handling
Braked castors prevent movement during transfer
Convenient drop sides
Fixed height, electric operation or hydraulic height adjustment to avoid stretching or leaning
Padded liner with head support for comfort
NEW liners are now available in a selection of colours please contact customer
services for details*
code
TRT1
TRT2
TRT3
TRT4
product
Price
Shower Trolley Hydraulic (1930mm x 720mm)
£2095
Shower Trolley Fixed Height (1930mm x 720mm) fixed at 800mm high
£1280
£2095
Shower Trolley Electric (1930mm x 720mm)
£3435
*Additional cost applies
Note: If a size not detailed is required please contact Chiltern Invadex to arrange a visit from a Technical Sales Representative. A £50 delivery charge applies.
Trolley fully raised
Head end
50
180
830min
1190
960 max
Cot sides (side rails)
130
1785
Cot sides (End rails)
130
585
Trolley fully lowered
Head end
50
Trolley top
180
580
810
580
Dimension indicated * shows overall dimensions from outside of cot sides
570
1720
(TRT3) 1390
720*
1930*
(TRT3) 1600*
Shower trolleys custom made features
code
product
Price
TRT1SPEC
Length change (1400/1500/1600/1700/1800mm options)
£350
Width change (600/650/750/800mm options)
£350
Coloured liner - various colour options availablePoA
Prices quoted for custom made features are nett prices. Special delivery times apply.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
Shower/changing stretcher
Allows clients to be washed over a bath or in a shower area
Folds flat against the walll for neat storage
Drain holes for quick water drainage
code
TRT11
product
Price
Wall Mounted Tip up Shower/Changing Stretcher (1900mm x 700mm)
£440
Note: T11 has no backrest and is not handed. If a size not detailed is required please contact Chiltern Invadex to arrange a visit from a Technical Sales
Representative.
Technical Information TRT11
190
(1520 c/c)
190
132
700
900
700
1900
110
1900
Shower/changing stretcher with adjustable back
Allows clients to be washed over a bath or in a shower area
Folds flat against the wall for neat storage
Drain holes for quick water drainage
Adjustable back can be locked in various positions to suit the user
code
TRT12
product
Wall Mounted Tip up Shower/Changing Stretcher with Adjustable Backrest (1900mm x 700mm)
Price
£560
Note: Standard T12 has the adjustable backrest on the right hand side as pictured. If the opposite hand is required please contact the Technical Helpdesk for
assistance. If a size not detailed is required please contact Chiltern Invadex to arrange a visit from a Technical Sales Representative.
Technical Information T12
190
adj
(1520 c/c)
190
132
700
700
900
1900
1900
110
TRT11 & TRT12 Shower stretchers custom made features
product
Price
Height change (800/850/950/1000mm options)
£95
£225
£95
Distance off wall change (75/100/150mm options)
£40
Fitted with cot sides
£95
Skirt on front edge of stretcher (350mm deep)
£95
Prices quoted for custom made features are nett prices
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
127
Shower/Changing Stretcher Padded Liner
Padded liner complete with sides, head support cushion & drop sides
Safe, comfortable bathing
Sturdy design provides reassurance for the bather
NEW liners are now available in a selection of colours please contact customer
services for details *
code
TRT13
product
Price
Wall Mounted Tip up Shower/Changing Stretcher (1930mm x 715mm)£995
*Additional cost applies
Note: If a size not detailed is required please contact Chiltern Invadex to arrange a visit from a Technical Sales Representative.
Technical Information TRT13
190
1550 c/c
132
200
900
190
570
1720
1930*
1930*
715
715*
175
Shower stretchers custom made features
code
product
Price
TRT13SPEC
Height change (800/850/950/1000mm options )
£95
£225
£95
Distance off wall change (150mm/200mm options)
£40
Coloured liner - various colour options available
PoA
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
HEIGHT ADJUSTABLE SHOWER STRETCHERS
Height adjustable shower/changing stretcher
Height adjustable via handset to suit carer requirement and transfer
Height adjustment between 500mm and 900mm above floor level
1400 and 1800 length options
Reliable electric motor
Comfortable PVC coated canvas with drainage holes
Optional cot side for added security
Folds against wall when not in use
Optional skirt to protect carer from splashes
code
IDPRS01
IDPRS02
IDPRS03
IDPRS04
IDPRSK1
IDPRSK2
product
Price
Wall Mounted height adjustable stretcher (1800mm x 600mm)
£2,619.00
£2,572.50
Wall Mounted height adjustable stretcher (1800mm x 600mm) with cot side£2,915.00
Skirt to suit 1800mm stretcher£170.75
Skirt to suit 1400mm stretcher£156.50
Optional skirt Optional cot side
1400mm model
SYMBOLS: Bulk item
Made to order
1900mm model
Tel: 01869 365500
Fax: 01869 365588
[email protected]
129
HEIGHT ADJUSTABLE SHOWER STRETCHERS
Height adjustable shower/changing stretcher
Height adjustable via handset to suit carer requirement and transfer
Height adjustment between 300mm and 1000mm above floor level
1300 and 1800 length options
Reliable electric motor
Optional cot side for added security
Adjustable head support
Folds against wall when not in use
Integral water collection tray
1500mm flexible hose
Curved base provides safe, comfortable bathing
Shown with optional cot side
code
IDPRS05
IDPRS06
IDPRS07
IDPRS08
product
Price
£3,961.75
£3,883.00
1800mm model1300mm model
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
PAEDIATRIC RANGE
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Illustration only.
Paediatric tilt in space chair available
to special order only. Please call
for details
Fax: 01869 365588
[email protected]
131
PAEDIATRIC RANGE - SHOWER CHAIR
AquaMaster Paediatric Shower Chair
The paediatric shower chair has all of the features of the popular AquaMaster range, perfectly proportioned
to suit paediatric use. A large range of side pads, thoracic supports and support straps allow the chair
to be adapted to suit smaller children. The paediatric chair is available with numerous frame colours.*
The AquaMaster range of shower commode chairs provides a rigid one piece base frame
with modular elements to allow easy replacement of components to suit the users changing
needs. Seats, armrests and footrests which are interchangeable. The chair also features a
wide range of accessories and is available as a made to measure piece of equipment, specially
manufactured at our Oxfordshire facility to meet individual needs. The coated frame features
an anti-microbial element which is proven to destroy 99.9% of harmful bugs including MRSA.
Main Features
Safe working load 130kg (20st) (286lb)
The chair features a rigid one piece base frame.
Removeable armrests and footrests swing away to aid transfer.
Several footrest options are available, each is height adjustable to ensure that the user is in a comfortable position.
Seats are available as flat padded, full ring aperture or horseshoe with a range of aperture sizes to suit the user.
Options extended seats and pressure relief foam.
Optional commode pan and cradle or sliders available
.
Option for 20” or 22” self propelling wheels
Attendant propelled models are provided with four braked castors, directional locking castor available on request.
Each model can be manufactured as a bespoke, user specific model (subject to site survey)
*please call us for a colour chart.
code
A20
A21
product
Paediatric Chair Attendent Propelled
Paediatric Chair Self Propelled A20 Attendent propelled model
400
description
Horseshoe, Aperture, Flat Padded Seat Horseshoe, Aperture, Flat Padded Seat A21 Self propelled model
410
110
310
440
910
310
440
195 20” wheel
220 22” wheel
440
250
520
Rear view
400
410
110
910
price
from £360
from £420
250
430
200
495 20” wheel
560 22” wheel
630
Rear view
Special Features
selection
description
Price
Chair width
Available in custom widths
£141
Height
Raise or lower seat height (maximum increase +150mm/6”)
£105
Backrest options
Additional recline (upto10 degrees)
£28
£83
Height change £39
£22
£28
£72
Seat options
Non standard seat
£270
Seat skirt (for padded horseshoe and padded aperture seats only)
£35
Extra padding (maximum +25mm/+ 1”)
£39
£22
£39
£22
Armrest options
Height increased or lowered
£39
Length change
£39
£61
Cranked armrests
£26
Footrest options
£24
£54
£39
The above list shows the most commonly requested special features, additional items are available please call customer services to discuss
specific requirements on 01869 365500 opt 1. See following page for accessories.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
PAEDIATRIC RANGE - SHOWER CHAIR
Commode cradle
CHCS3020
Commode cradle
£15
Footrests with
toe straps
90 degree footrests
Commode pan
201-00147
Round pan
£27
Footrests with
£76
£76
211-00528-3 Left hand 211-00529-3 Right hand
Thoracic support
Provides lateral support to the users
trunk (adjustable)
CHCS3040Pair
CHCS3041 Left hand
CHCS3042 Right hand
£289
£145
£145
CHCS200LA-4 Left hand
CHCS200RA-4 Right hand
£28
£28
£60
Waist strap
Supports the waist and prevents
involuntary movement of upper body/
accidentally slipping out of chair.
Padded for comfort.
201-00150
201-00151
£49
£49
Extra Small Small
£49
£49
211-00528-1 Left hand
211-00529-1 Right hand Individual foot pad
Padded foot tray
201-00154 Paediatric foot tray
Used instead of standard footplates.
Prevents involuntary movements and
protects the user/carer against injury.
CHCS057 Not handed
£30 ea
Prevents involuntary movement of
upper body/accidentally slipping out
of chair.
201-00154 Harness -XS
201-00155 Harness - S
£126
£126
Footrests with
heel straps
Provides additional support for feet.
Prevents the user from slipping off the
back and falling forwards.
211-00528-2 Left hand 211-00529-2 Right hand £49
£49
Calf strap
Attaches around both footrest holders.
Provides support to the lower leg.
201-00146 Calf strap
£10
Head support
Provides padded support for the
users head (fully adjustable to suit)
CHCS3050 To suit push handle £206
CHCS3051 To suit straight handle£248
Front safety bar
Channel armrest
Fitted instead of standard armrests
to provide greater support to the
users forearm
CHCS3060
Channel armrest
SYMBOLS: Bulk item
Made to order
£52 ea
Fitted across the front of the chair to
provide extra support to the user and
to prevent the risk of accidental fall
CHCS009 Front safety bar (includes special armrests)
£95
Tel: 01869 365500
Fax: 01869 365588
[email protected]
133
PAEDIATRIC RANGE - TILT IN SPACE CRADLE
Paediatric Tilting Shower Cradle
Shown with optional aperture and
quilted side rails
code
WASHCRADTISP
Designed and tested in conjuction with Occupational Therapists and healthcare professionals
Offers a safe, controlled and comfortable showering position
Twin gas rams to ensure to ensure smooth reliable operation
Single hand control lever for ease of use
Stainless steel, plastic dip coated construction for strength and durability
Corrosion resistant stainless steel and nylon braked castors. Directional locking castor available.
Available with or without aperture
Easy drain mesh material which is removeable for cleaning
Bespoke options available, subject to survey
Range of accessories including head rests, lap straps and thoracic supports available
Frame and fabric colour options available
product
Tiliting cradle (paediatric)
Price
from £890
Tilt in Space Cradle custom made features
selection
description
Price
Frame
Width change
£141
Raise or lower seat height £105
Increase or reduce cradle length
£141
Fabric options
Add aperture (small, medium or large)
£40
Add non-standard aperture£65
Add lap strap/chest strap
£125
Side rails
Addition of side rails
£95
Enveloped rails
£150
Padded rails
£115
Quilted rails
£150
Specialist
Thoracic support rolls
£PoA
Adjustable, removable headrest support
£160
Dartex head cushion£100
Dartex knee support£85
Footboard
£121
Dartex pommel
£85
Both frame and fabric colour
options available, please call
for details
Shown in fully reclined position
with optional head cushion
Shown in upright position
b
f
e
d
g
h
j
a
l
k
c
Paediatric
SYMBOLS: Bulk item
Made to order
a
b
c
d
e
f
g
h
j
k
l
425
380
780
550
280
270
150
1005
885
650
410
Tel: 01869 365500
Fax: 01869 365588
[email protected]
PAEDIATRIC RANGE - IN BATH CRADLE
Otter In Bath Cradle
Available in three sizes
Durable plastic, non-rust frame
Backrest recline from 0 through to 90 degrees
Chest, waist and thigh straps for added security
Height & width adjustable head supports which can be used as thoracic supports as required
Removable fabric for laundering (screwdriver required)
Folds flat for easy storage
Soft fabric option available also provides extra padding between the fabric and the frame
code
IDOTT01S
IDOTT01M
IDOTT01L
product
Otter In Bath Cradle Otter In Bath Cradle
IDOTT02S
IDOTT02M
IDOTT02L
Otter In Bath Cradle Otter In Bath Cradle
description
Small Cradle - Standard Fabric
Medium Cradle - Standard Fabric
Large Cradle - Standard Fabric
price
£164
£192
£220
Small Cradle - Soft Fabric
Medium Cradle - Soft Fabric
Large Cradle - Soft Fabric
£200
£224
£252
Otter In Bath Stand
code
IDOTTBATH
product
Otter In Bath Stand
Optional accessory which allows the height of the in bath cradle to be increased to a convenient height for transfers and bathing
One stand fits all three cradle sizes
Quick release clips allow the cradle to be easily attached or removed
Height adjustable between 120 & 250mm
Legs folds flat for easy storage
description
Optional Cradle Bath Stand
price
£170
Otter Shower Stand
Optional accessory which allows the otter to be converted to a wheeled shower cradle
One stand fits all three cradle sizes
Quick release clips allow the cradle to be easily attached or removed
Sturdy, non-rust coated aluminium frame
Locking castors
Requires assembly (full instruction provided)
code
IDOTTSHOW
product
Otter Shower Stand
description
Optional Shower Stand
price
£220
Size
Seat Width
Seat Depth
Back Height
Seat Height
User Height (approx)
Weight capacity
Small
370
330
450
50-180
Upto 910
27kg (4st)
Medium
370
330
640
50-180
810-1270
54kg (8.5st)
Large
370
420
810
50-180
1170-1730
73kg (11.5st)
All measurements are shown in mm
Shown with optional in bath stand
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
135
PAEDIATRIC RANGE - SHOWER TROLLEY
Paediatric Shower Trolley
code
TRT3
Clients can be showered and dried without manual handling
Braked castors prevent movement during transfer
Convenient drop sides
Hydraulic height adjustment to avoid stretching or leaning, available as static height or with electric actuator as special order
Padded liner with head support for comfort
NEW liners are now available in a selection of colours please contact customer
services for details
product
Price
£2095
Note: A £50 delivery charge applies.
Trolley fully raised
Head end
50
180
830min
1190
960 max
Cot sides (side rails)
130
1785
Cot sides (End rails)
130
585
Trolley fully lowered
Head end
50
180
580
810
580
Trolley top
570
1390
720*
1600*
Shower trolleys custom made features
code
product
Price
TRT3SPEC
Length change £350
Width change £350
Coloured liner - 20 colour options available
£240
Static model
Less £815
Electric model
£1,340
Prices quoted for custom made features are nett prices and are in addition to the standard product price. Special delivery times apply.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
137
ALPHABETICAL INDEX
A
Page
P103-105
P120-121 P114-115
P100-101
P116-123, 132-133
P117-123
P132-133
P122-123
Product description
AccessMaster 3000 Bath
Accessories (AquaMaster shower chairs)
Accessories (TransAqua shower chairs)
Arm supports
AquaMaster shower commode chair
AquaMaster Clos-o-Mat shower commode chair
AquaMaster Paediactric shower commode chair
AquaMaster tilt in space shower chair
B
Page
Product description
P117-118
Bariatric Clos-o-Mat bench
P105
Basin & bath taps
P103-105Bath
C
Page
P5, 51, 63
P106-108
P4, 7-27
P4, 9, 20
P67
D
Page
P5, 52, 64-65
P77-80
E
Page
P5, 53, 66
F
Page
P4, 8, 10-13
P4, 19, 21-24
G
Page
P82-84
P100-101
H
Page
P129-130
P100
SYMBOLS: Bulk item
Made to order
Product description
Cardale Level access shower tray & enclosure
Clos-o-mat Palma Vita (compatible shower chair shown on Page 112 & 117)
Cubicle range
Cubicle range - shower chair compatibility
Curtain rails & curtains for shower trays & enclosures
Product description
Dovedale Easy access shower tray & enclosure
Dovedale Easy access shower tray - Impressions range
Product description
Edale Easy access shower tray & enclosure
Product description
Front Entry Shower cubicles
Front Entry Shower cubicle toilets
Product description
Gravity waste for shower trays - for timber floor construction
Grab rails
Product description
Height adjustable shower/changing stretchers
Hinged arm supports
Tel: 01869 365500
Fax: 01869 365588
[email protected]
ALPHABETICAL INDEX
I
Page
P69-80
P135
P94
L
Page
P67-80
Product description
Impressions collection (brushed aluminium & glass shower range)
In bath shower cradle
Invaflo shower drain
Product description
L shaped curtain rails
M
Page
Product description
P27Macerator
P26, 68
Mira showers
P141
Manufacturing times - made to order/special order
O
Page
P135
P
Page
P110
P106-108
P131-136
P135
P132-133
P136
P134
P31, 68
P85-89
S
Page
P4, 47-48, 58-59
P73-76
P26, 68
P112-123
P124-125
P127-130
P129, 136
P8-9
P10-15
P19-25
P16-17
P67
P94
P31, 68
P96-99
P16-17
P98
SYMBOLS: Bulk item
Made to order
Product description
Otter In bath cradle
Product description
Padded toilet seats
Palma Vita (Clos-o-mat) (compatible shower chair shown on Page 112 & 117)
Paediatric range
Paediatric range - In bath cradle
Paediatric range - Shower chair
Paediatric range - Shower trolley
Paediatric range - Titling shower cradle
Pumped waste for shower trays - for concrete floor construction
Product description
Sandwell Level access shower tray & enclosure
Sandwell Level access shower tray - Impressions Range
Showers
Shower chairs
Shower cradle
Shower stretchers
Shower trolleys
Shower cubicle Selector
Shower cubicles
Shower cubicle Toilets
Shower cubicle seats
Shower curtains
Shower drain (Invaflo)
Shower guard (Portascreen)
Shower seat range
Shower seats for Shower cubicles
Shower seat wall fixing kit
Tel: 01869 365500
cont.../
Fax: 01869 365588
[email protected]
139
ALPHABETICAL INDEX
S \...cont
Page
P54
P44-94
P57-80
P82-84
P55-56
P47-51
P52-53
P63, 92
P85-89
P44
P45
P90
P4, 9, 14-15
P4, 20, 24-25
P4, 9, 15
P67
P98
Product description
Shower enclosures - made to measure
Shower trays & enclosures
Shower tray & enclosure - options, prices & order codes
Shower tray - gravity waste
Shower tray - general information
Shower tray & enclosure specification guide - Level access shower trays
Shower tray & enclosure specification guide - Easy access shower trays
Shower tray Integral waste pump
Shower tray - pumped waste
Shower tray selector - Level access shower trays
Shower tray selector - Easy access shower trays
Shower waste pump
Side Entry MK2 Shower cubicle
Side Entry MK2 Shower cubicle toilet
Slimline Side Entry Shower cubicle
Straight curtain rails
Surefix wall fixing kit
T
Page
P126, 136
P127
P127
P128
P122-123
P124, 134
P134
P96-99
P110
P109
P112-115
U
Page
P67
W
Page
P125
P124, 134
P134
P82-92 P5, 49-50, 60-62
P71-72
P29-42
P29
P93
P37-38
P39-42
P32-35
P31
P39-42, 85-89
SYMBOLS: Bulk item
Made to order
Product description
T1/T2/T3/T4 shower trolleys
T11 shower stretcher
Tilt in space shower chair
Tilting shower cradle
Tilting shower cradle - paediatric
Tip up shower seats
Toilets & toilet seating
Toilet raiser/plinth
TransAqua shower chair
Product description
U shaped curtain rails
Product description
Washington shower cradle
Washington tiliting shower cradle
Washington tiliting shower cradle -paediatric
Waste options for shower trays
Westdale Level access shower tray & enclosure
Westdale Level access shower tray - Impressions range
Wet floors
Wet floor selector
Wet floor kit
Wet floor gravity waste - for timber floor construction
Wet floor pumped waste - for concrete floor construction
Wet floor trays & enclosures - options, prices and order codes
Wet floor Bolster section
Whale pump
Tel: 01869 365500
Fax: 01869 365588
[email protected]
GENERAL INFORMATION
Delivery policy
Chiltern Invadex products are normally available from stock with the following exceptions:
1. Products which are Made to Order are shown with a
symbol. Lead times can range from 7 days for standard product to 6-8 weeks for bespoke products, dependent upon the scope of the specification changes. Please call customer services on 01869 365500 Opt 1, for details of
specific products
2. Oversized or bulk items are shown with a
symbol and may attract additional carriage
charges. Delivery times may differ from our standard terms, please refer to customer services for details.
3. Additional delivery options such as timed deliveries are available at an additional charge. This requirement must be advised at time of order and may not be available for oversized items or for the Scottish Highlands and Islands. Please call for details.
Anti-microbial Coating
Items which are identified by a
symbol are rust free stainless steel coated with Talisman 30ES AM
performance polymer alloy which includes a silver anti-microbial additive to reduce levels of MRSA by at
least 99.9%
Minimum order charge
Please note: There is a minimum order charge of £10.
VAT
All prices shown are net and subject to VAT at the current rate. A VAT Eligibility Declaration Form is available from Chiltern Invadex which can remove the need to pay VAT where a product is being ordered by
and for the sole use of, a person who is eligible disabled.
Surveyor visits
Chiltern Invadex has a Nationwide team of experienced representatives who are able to make site visits
to assist in the specification of equipment and provide quotations.
Surveyor visits are available at no charge and are non-obligation. To arrange a visit please contact customer services on 01869 365500 Opt 1.
Price changes
While prices are correct at time of printing they may be subject to change without notification.
Specification changes
As part of our commitment to new product development we reserve the right to alter specifications
without prior notice.
SYMBOLS: Bulk item
Made to order
Tel: 01869 365500
Fax: 01869 365588
[email protected]
141
Terms and Conditions of Sale
1 DEFINITIONS
1.1 The Buyer means any party to whom Goods are invoiced who is NOT a Consumer.
1.2 The Contract means any contract between the parties for the sale of Goods by the
Seller to the Buyer.
1.3 The Contract Price means the price in effect at the time of despatch of the goods from the
Sellers warehouse unless otherwise stated.
1.4 Goods means any goods ordered by the Buyer and supplied by the Seller pursuant to the
Contract.
1.5 The Seller means Chiltern Invadex UK Ltd.
1.6 A Consumer means an individual acting for purposes which are wholly or mainly outside
that individual's trade, business, craft or profession. (Regulation 4, Consumer Contracts
Regulations)
2 TERMS AND CONDITIONS
2.1 These are the only conditions upon which the Seller is prepared to deal with the Buyer,
and they shall govern the Contract to the entire exclusion of any other express or implied
terms ALWAYS PROVIDED that nothing contained herein shall operate so as to effect the
Buyers or Consumers statutory rights.
2.2 In the case of these terms dealing with a Consumer then the Consumer Contract
Regulations 2013 apply.
2.3 These conditions represent the entire understanding between the parties and supersede
any prior arrangements, representations, undertakings, agreements or implications.
3
PRICES
The price charged is the price as per the Seller’s current published trade price list, less
any agreed discount, unless otherwise agreed or unless the Seller has amended the price
given to cover any variation in the cost to the Seller. Prices are subject to change without
notice. The Seller reserves the right to amend the prices given at any time to cover any
variation in cost which takes place after that time.
4 PAYMENT
4.1 Goods for Delivery in the UK:4.1.1Unless otherwise agreed the prices quoted are strictly nett 30 days from the date of
invoice, and are exclusive of VAT. Unless otherwise agreed in writing payments shall
be made in Sterling to: Chiltern Invadex UK Ltd. 126 Churchill Rd. Bicester,
Oxfordshire OX26 4XD
4.2 Goods for Delivery Elsewhere than in the UK:Unless otherwise agreed the prices quoted are strictly nett payments payable by
sight draft letter of credit or such similar document as maybe accepted by the Seller
upon presentation of documents at delivery.
4.3 All Territories
4.3.1 Any liability on the part of the Seller is subject to the above terms of payment and
all other of the Buyer's obligations under the Contract being strictly observed;
4.3.2 The Seller reserves the right to deliver any one or more consignments, each
consignment to be paid for in accordance with the above terms, and in the event of
payment being overdue for any one consignment the Seller shall be at liberty to
suspend all future deliveries without liability, pending satisfactory settlement being
reached;
4.3.3 If the Buyer fails to make any payment due to the Seller under the Contract by the
due date for payment, then the Buyer shall pay interest on the overdue amount at
the rate of 5% per annum above the base rate of Barclays Bank PLC from time to
time. Such interest shall accrue on a daily basis from the due date until actual
payment of the overdue amount, whether before or after judgment. The Buyer shall
pay the interest together with the overdue amount.
4.3.4 In the event of receivership or liquidation, or where no valid reason is given for nonpayment of invoices, the Directors or the Proprietors of the company or business
shall become personally liable to settle all outstanding debts properly due to
Chiltern Invadex UK Ltd.
4.4 If a payment is made without a reconcilable remittance advice then the Seller has the
right to allocate the payment against the oldest invoices on the account. A statement
of account is sent by the Seller to the Buyer every month with the details of all
outstanding invoices. Should a statement for the preceding month not be received by
the Buyer by the 10th of the month following then the Buyer must notify the Seller of
non receipt. If any invoice is to be challenged or queried not withstanding any other
clause in the terms and conditions regarding time limits for notification of non
delivery, shortage or damaged goods, then it must be done within 45 days of the said
invoice date.
Withholding of Payment and Set off
4.5 The Buyer shall not be entitled to withhold payment of any amount payable under
the Contract to the Seller because of any disputed claim of the Buyer in respect of
defective goods or any other alleged breach of the contract by the Seller nor shall
the Buyer be entitled to set off against any amount payable under the contract of
the Seller any sums that are not then due and payable by the Seller or in respect of
which the Seller disputes liability
The Buyer shall not be entitled to withhold payment of the full amount due when
they dispute only part of an account.
5 DESPATCH
5.1 Dates for despatch shipping or delivery are approximate only and will date from the
Seller's written acceptance of the Buyer's order. The Seller will use its best endeavours to
ensure that such dates are met, but shall not be responsible for any direct or indirect
losses which may arise from failure to despatch or deliver within the time stated. The
Seller shall not be responsible for failure to deliver or delays in delivery occasioned by
causes beyond its control, including without limitation strikes, lockouts, or other
disturbances, inability to obtain materials, supplier’s failure to deliver, breakdowns delays
of carriers or suppliers, governmental acts and regulations, acts of public enemies, wars,
blockades, insurrections, riots, epidemics, floods, washouts and explosions.
5.2 Should despatch be delayed by any cause whatsoever, a reasonable extension of time
shall be granted, and until such extension has expired the Contract shall not be capable
of cancellation by reason only of such delay.
5.3 Where Goods are delivered on instalments under this contract each instalment shall be
deemed to be sold under a separate contract and any failure on the part of the Seller for
the delivering of a particular instalment shall not entitle the Buyer to repudiate the contract
with regard to any instalments remaining deliverable or to refuse or to withhold payment
for any of the Goods delivered.
6 DELIVERY
6.1 Time shall not be of the essence unless so agreed in writing. Delivery dates and times
given by the Seller are genuine estimates and the Seller will take all reasonable steps to
comply with them but shall not be liable for failure to do so.
6.2 If no time for delivery is specified the Buyer shall be bound to accept the Goods when
they are ready for delivery and the Seller shall be entitled to invoice the Buyer whether
delivery is accepted or not. If delivery is not accepted then the Seller shall be entitled to
store the Goods and charge the reasonable costs thereof to the Buyer together with any
other cost incurred including additional carriage. If within 1 month after the invoice date
the price or part thereof remains unpaid the Seller shall be entitled to sell the Goods to a
third party at such price as the Seller shall deem reasonable and any loss shall be a debt
payable by the Buyer.
6.3 In respect of Goods delivered within the UK the Contract Price includes delivery to the
premises stipulated by the Buyer unless otherwise agreed (subject to paragraph 10 below).
6.4 In the case of Goods to be delivered elsewhere than in the UK the Seller will deliver in
accordance with the Buyers instructions and at its expense. The Buyer will pay all
charges including cost of insurance of the Goods in transit, shipping, storage, freight and
handling charges, local taxes, custom duties and insurance ex Works, unless otherwise
stated by the Seller. If the Seller enters into any contract of carriage or insurance it does
so as the Buyer's agent and at the Buyer's expense. The Buyer's order shall be deemed
to include an irrevocable authority for the Seller to enter into any such contract of carriage
Bulk item
or insurance as may be necessary and the Buyer will forthwith reimburse the Seller in
order and charges thereby incurred.
respect Made
of any andto
all expenses
6.5 In the case of Goods for delivery in the UK, the risk in the Goods shall pass to the Buyer
SYMBOLS:
from the date of delivery to the premises to which the Goods are required to be delivered
or collection by the Buyer from the Seller' premises. In the case of Goods for delivery
elsewhere than in the UK, the risk in the Goods shall pass to the Buyer at the moment of
despatch from the Seller’s premises. Where the Buyer fails to accept delivery pursuant to
Clause 6 .2 hereof and the Goods are stored by the Seller the risk shall pass to the Buyer
from the invoice date and shall remain with the Buyer until sale or disposal.
6.6.1 If the Buyer enters into a Deed of Arrangement or makes any composition with
Creditors or if a Receiving Order is made against him or if being a Company an
Order for Winding Up is made or a Resolution for winding up is passed or if a
Receiver is appointed or if the Buyer becomes otherwise unable or unwilling to meet
his or its obligations in the ordinarycourse of business the Seller may stop any
Goods in transit and suspend further deliveries and shall be entitled to treat the
Contract as at an end owing to the default of the Buyer such default giving rise to
damage;
6.6.2 Nothing in the preceding clause shall prejudice any other rights of the Seller;
6.6.3 Should default be made by the Buyer in paying any sum due under any
Order as when it becomes due the Seller shall have the right to either
suspend all further deliveries until the default be made good or at the discretion of
the Seller and notwithstanding that the Seller may have exercised the right to
suspend delivery to cancel the order so far as any further Goods remain to be
delivered.
7 RESERVATION OF TITLE
7.1 Notwithstanding delivery and the passing of risk, property in and title to the Goods shall
remain with the Seller until the Seller has received payment of the full price of (i) all
Goods and/or Services the subject of the Contract and (ii) all other goods and/or services
supplied by the Seller to the Buyer under any other Contract whatsoever.
7.2 Until property in and title to the Goods passes to the Buyer, the Buyer shall be entitled to
deal with the Goods in the ordinary course of its business provided that if the Goods are
altered or any goods become attached to the Goods or if any part of the Goods is replaced
such alteration attachment or replacement shall not affect the Seller's property in and title
to the Goods. Further, the Buyer will keep the Goods properly stored, protected, insured
and separate from all or any other Goods whether belonging to the Seller and the Buyer or
any other third party and will not remove, alter, modify, or deface the Goods and/or any
identification mark placed on the Goods and/or their packaging.
7.3 The Buyer's right to possession and power to deal with the Goods shall terminate
immediately if any of the circumstances set out in Condition 7.6, 7.7, 7.8, and 7.9 occur or
amounts due to the Seller are not paid by their due date. In such circumstances the Buyer
shall place the Goods at the disposal of the Seller and the Buyer grants to the Seller an
irrevocable licence to enter at any time any premises owned or occupied by the Buyer or
in the Buyer's possession for the purpose of repossessing and removing any Goods the
ownership of which has remained vested in the Seller. The Seller shall not be responsible
for and the Buyer will indemnify the Seller against liability for any damage occurring
during such repossession and removal where such damage could not reasonably have
been avoided.
7.4 The Seller will be entitled to recover payment for the Goods notwithstanding that property
in and title to the Goods has not passed from the Seller.
7.5 Where the Seller is unable to determine whether any goods are the Goods in respect of
which the Buyer's right to possession and power to deal has terminated, the Buyer will be
deemed to have sold all Goods of the kind sold by the Seller in the order in which they
were invoiced to the Buyer.
7.6 The Seller may immediately terminate the Contract forthwith or suspend future deliveries
if the Buyer: passes a resolution or presents a petition for winding-up, bankruptcy or for
the appointment of an administrator, the appointment of a receiver and/or manager or
administrative receiver over the whole or any part of its undertaking and assets; makes a
proposal for a voluntary arrangement within the Insolvency Act 1986 or a proposal for any
other composition scheme or arrangement with or the calling of any meeting of its
creditors generally (otherwise in furtherance of a scheme for amalgamation or
reconstruction); the levying of execution or distress on any of its assets; the failure to pay
its proper debts as and when due and anything analogous to any of the foregoing under
the law of the jurisdiction where the Buyer is established.
7.7 Without prejudice to any other rights or remedies under the Contract the Seller may at its
option forthwith on written notice suspend deliveries or terminate the Contract wholly or in
part and any other contract with the Buyer in the event that the Buyer does not make any
payments by the date on which they become due under the Contract or any other contract
between the Buyer and the Seller and/or if the Buyer commits any breach of any contract
(including without limitation the Contract) with the Seller.
7.8 If the Buyer terminates the Contract for reasons other than those provided for in Condition
(7.6) which affect the Seller or due to a material breach entitling the Seller to terminate
the Contract the Buyer shall be liable to the Seller for any costs or charges incurred by
the Seller by reason of such termination together with all costs incurred by the Seller up
to the date thereof and any difference between the price set out overleaf and the price at
which the Seller is able to sell the Goods elsewhere and the Seller shall have a general
lien for any such sum on all and any property of the Buyer in its possession including, but
not limited to, any dies.
7.9 In the event of a suspension of deliveries or performance the Seller shall be entitled as a
condition of resuming performance, to require pre-payment, or such security as it may
deem appropriate.
8 NOTICE OF NON-DELIVERY, SHORTAGE OR DAMAGED GOODS
8.1 The Seller must be notified of any shortage of or damage to Goods within 7 days of
delivery or collection and such notification shall be confirmed in writing within 8 days of
delivery or collection. No responsibility whatsoever for such shortages or damage will be
accepted by the Seller in the event of failure by the Buyer to notify the Seller of the same
within the said period and if no such notifications is given the Buyer shall be deemed to
have accepted the Goods. Goods damaged in transit should not be accepted from the
carrier and no credit will be given for or replacements made of Goods accepted from the
carrier in a damaged condition. If Goods are rejected the Seller shall be entitled to inspect
and/or test the same where the Goods then are or at such other place as the Seller shall
require. The risk in the Goods so rejected shall remain with the Buyer until the Seller
takes possession thereof.
9 LIMITATION OF LIABILITY
9.1 Except where there is an absolute prohibition against exclusion or restriction of liability the
Seller shall not be under any liability whatsoever or howsoever arising in respect of or in
connection with:
9.1.1 any defect in the Goods which should reasonably have been discovered upon
examining or testing prior to acceptance;
9.1.2 any claim under this Contract to the extent that it relates to loss or damage which is
not directly and immediately consequent upon the matters complained of;
9.1.3 any such claim whatsoever to the extent that the total amount thereof exceeds more
than one and a half times the total price of the Goods complained of;
9.1.4 any claim made that the Goods do not comply with any Regulations Act of
Parliament or other similar legislation and it shall be the Buyer's responsibility to
ensure that the Goods comply with any regulations required for the purpose for
which the Buyer intends to use them.
9.2 The Buyer will indemnify and hold harmless the Seller against any losses, liabilities, costs
or actions suffered or incurred as a consequence of any third party claiming that goods
supplied or work undertaken by the Seller is illegal, in breach of any intellectual property
rights or other right which such third party may have.
9.3 Nothing in these Conditions shall limit or exclude the liability of the Seller for:
(a) death or personal injury caused by its negligence, or the negligence of its employees,
agents or subcontractors (as applicable); or
(b) fraud or fraudulent misrepresentation; or
(c) breach of the terms implied by section 12 of the Sale of Goods Act 1979; or
(d) defective products under the Consumer Protection Act 1987; or
(e) any matter in respect of which it would be unlawful for the Seller to exclude or restrict liability.
9.4 Subject to clause 9.3:
(a) the Seller shall under no circumstances whatever be liable to the Buyer, whether in contract,
tort (including negligence), breach of statutory duty, or otherwise, for any loss of profit, or any
indirect or consequential loss arising under or in connection with the Contract
Tel: 01869 365500
CINV 415.07 NOV 2014
10 MINIMUM ORDER
The Seller will not be obliged to accept an order for Goods to a value of less than £100 pre
VAT. In the event that the Seller does agree to accept an order for goods to a value of
less than £100 pre VAT then that order will be subject to a handling and carriage charge
of a minimum of £6.00, in addition to the Contract Price. For next day delivery in
mainland UK there will be a minimum charge of £12.00 regardless of order size. For this
service our sales office must receive the order by 3.00 pm on the day of despatch. The
values for minimum order and carriage charge may vary from time to time.
11
VARIATION
11.1 No variation in the contract shall take place unless notified to a Director of the Seller
in writing and accepted by the Director of the Seller in writing. No person (whether
an employee, agent or representative of the Seller or otherwise) has any authority
on the Seller's behalf to make orally any addition to or qualification or variation of
the Contract or of these conditions.
11.2 Where a delivery schedule has been agreed the schedule shall be deemed to be
firm for a maximum period of 180 days and is not under any circumstances to be
subject to variation by the Buyer in less than that period. Any other variation of the
delivery schedule must be agreed in accordance with this condition and unless so
agreed shall be of no effect.
12 SUPPLY OF GOODS CANCELLATION OF ORDERS AND RETURNS
12.1 Orders may be cancelled or Goods returned only with the prior written consent of
the Seller and subject to any terms set down by the Seller (including a 30% charge for
cancellation of orders).
12.2 Certain items may be repaired, replaced or credited in full at the discretion of the Seller.
All returns must be sent at the Buyer's expense to the Seller at Sterling to Chiltern
Invadex UK Ltd. 126 Churchill Rd. Bicester, Oxfordshire OX26 4XD, in a sealed
carton accompanied by an accurate returns note. The return note must specify the fault
and the invoice number and the price paid and the date.
12.3 In respect of any Goods supplied by the Seller but manufactured by third parties, the
benefit of any warranties or guarantees given to the Seller by such manufacturers or
suppliers will wherever practicable be passed to the Buyer subject to the conditions upon
which they were given.
13 GENERAL
13.1 The Seller does not warrant that the Goods conform with any Regulations in the United
Kingdom or elsewhere, and the Buyer shall be responsible for ensuring the suitability of
the Goods for the purpose or purposes for which he/she intends to use them. The Buyer
shall not directly sell or send Goods to the United States of America without the express
consent in writing of the Company.
13.2 Dimensions and other physical characteristics are subject to normal commercial
tolerances, and the Buyer shall be responsible for ensuring the fitness of the Goods for
the Buyer's application.
13.3 The Seller reserves the right to discontinue or alter the Goods without prior notice to the
Buyer, and all orders are accepted subject to availability.
13.4 In the event that the Buyer intends to supply the goods to any person the Buyer shall
ensure that all warnings, labels, instructions, manuals and any other information in respect
of the Goods which are supplied with the Goods are not lost or damaged whilst the Goods
are in the Buyer's possession or under the Buyer's control and that they are supplied with
the Goods when they are released from the Buyer's possession or control.
13.5 The goods are subject to any patent, trade mark, registered design, copyright, or other
right of any person.
13.6 Unless otherwise confirmed, nothing in this catalogue is to be taken as a representation of
the source of original, manufacture or production of the Goods or any part thereof.
13.7 Third party rights. A person who is not a party to the Contract shall not have any rights to
enforce its terms.
14 WAIVER
Any waiver by the Seller of any breach of these conditions shall not be construed as a
waiver of any other existing or future breach.
15 ARBITRATION
If at any time any question, dispute or difference whatsoever shall arise between the
Seller and the Buyer, upon, in relation to or in connection with the Contract, either party
may give to the other notice in writing of the existence of such question, dispute or
difference and the same shall be referred to arbitration in England by a person to be
mutually agreed upon, or failing agreement by some person appointed by the President
for the time being of the Law Society. The submission shall be deemed to be a
submission to arbitration within the meaning of the Arbitration Acts 1950 and 1979 or any
statutory modification or re-enactment thereof.
16 NOTICES
Any notice required to be given hereunder shall be in writing and sent by pre-paid
recovered delivery or by facsimile transmission (fax) and shall be deemed effective if sent
by post at the expiration of 72 hours after the same was posted whether or not received
or if sent by fax, 24 hours after despatch.
17 LEGAL CONSTRUCTION
The Contract shall in all respects to be construed and operate as a contract governed by English
law and unless otherwise agreed in writing is subject to jurisdiction of the English Courts.
18 Data protection Act 1998
The Seller will make a search with a credit reference agency for the purpose of all
account applications and will keep a record of that search on your customer file . This
information will be shared with other business for the purpose of credit references. We
may also make enquiries about the principal directors with a credit reference agency.
We will monitor and record information relating to your credit performance and such
records will be made available to other organisations to assess applications for credit.
19 FORCE MAJEURE
Neither party shall be liable for any failure or delay in performing its obligations under the
Contract to the extent that such failure or delay is caused by a Force Majeure Event. A
Force Majeure Event means any event beyond a party's reasonable control, which by its
nature could not have been foreseen, or, if it could have been foreseen, was unavoidable,
including strikes, lock-outs or other industrial disputes (whether involving its own
workforce or a third party's), failure of energy sources or transport network, acts of God,
war, terrorism, riot, civil commotion, interference by civil or military authorities, national or
international calamity, armed conflict, malicious damage, breakdown of plant or
machinery, nuclear, chemical or biological contamination, sonic boom, explosions,
collapse of building structures, fires, floods, storms, earthquakes, loss at sea, epidemics
or similar events, natural disasters or extreme adverse weather conditions, or default of
suppliers or subcontractors.
20 SEVERENCE
20.1 If any provision or part-provision of this agreement is or becomes invalid, illegal or
unenforceable, it shall be deemed modified to the minimum extent necessary to make it
valid, legal and enforceable. If such modification is not possible, the relevant provision or
part-provision shall be deemed deleted. Any modification to or deletion of a provision or
part-provision under this clause shall not affect the validity and enforceability of the rest of
this agreement.
20.2 If one party gives notice to the other of the possibility that any provision or part-provision
of this agreement is invalid, illegal or unenforceable, the parties shall negotiate in good
faith to amend such provision so that, as amended, it is legal, valid and enforceable, and,
to the greatest extent possible, achieves the intended commercial result of the original
provision.
Fax: 01869 365588
[email protected]
CHILTERN INVADEX UK LTD. 126 Churchill Rd. Bicester, Oxfordshire OX26 4XD Tel:+44 (0) 1869 365500 Fax: +44 (0) 1869 365588 Web: www.chilterninvadex.co.uk
Chiltern Invadex (UK) Ltd
126 Churchill Road
Bicester
Oxfordshire
OX26 4XD
Tel: 01869 365500
Fax: 01869 365588
Web: www.chilterninvadex.co.uk
E-mail: [email protected]
Overseas Enquiries:
Tel: +44 (0) 1869 365500
Fax: +44 (0) 1869 365588
FM 553189
Copyright © Chiltern Invadex (UK) Ltd. The design of the product shown in this guide is vested in Chiltern Invadex (UK) Ltd and should not be copied or reproduced in anyway whatsoever without the express
permission in writing of Chiltern Invadex (UK) Ltd. As part of our commitment to new product development we reserve the right to alter specifications without prior notice.
This is an original design of Chiltern Invadex (UK) Ltd in which Design Right Subsists.
Published by: Chiltern Invadex (UK) Ltd 126 Churchill Road Bicester Oxon OX26 4XD Registered in England No: 04704248
May 2015

Price and Technical Guide

Transcription

Similar documents

christmas brochure

12.12.13 General Price Guide edited by TB WITH COVER.indd

Stork poem baby shower invitation

moor street, rainham

Untitled

My Roommate, the Herbal Fashion Queen

A Better Way after Brain Injury, Wendy Williams

1121 40th Street #5406 | Emeryville

KENNEDY BUILDING K102 1 1 - 48.6 524