Kerite LTR3 Round Cables

Transcription

Kerite LTR3 Round Cables
LTR3 – KERITE®
LTR3
THE KERITE COMPANY
Type LTR3 Round Electrical Submersible Pump Cable
1. Solid, uncoated copper conductor
2. Proprietary polypropylene insulation
with a metal deactivator and a
polyadhesive layer to the conductor
3. Proprietary low oil swell
polymer jacket
4. Galvanized steel armor
Kerite LTR3 round cables are rated 5kV for operating temperatures up to 205ºF (96°C). They provide cost
effective solution for low temperature wells. The round configuration provides balanced electric properties,
and the solid uncoated copper conductors minimize longitudinal gas migration. The insulation is a high
quality polypropylene with metal deactivator and a barrier of adhesive polymer between the copper and
polypropylene. The three phase conductors are protected by an overall jacket of low oil-swell polymer.
Part
Number
Conductor
Size
AWG
(mm2)
Conductor
O.D.
Inches
(mm)
Insulation
O.D.
Inches
(mm)
Overall
O.D.
Inches
(mm)
Weight
lbs./ft.
(kg/m)
1LTR3015-000
1
(42.4)
0.29
(7.3)
0.47
(11.9)
1.34
(34.0)
1.7
(2.5)
1LTR3025-000
2
(33.6)
0.26
(6.6)
0.44
(11.2)
1.28
(32.5)
1.5
(2.2)
1LTR3045-000
4
(21.1)
0.20
(5.2)
0.38
(9.7)
1.16
(29.5)
1.2
(1.8)
Note: All dimensions are subject to normal manufacturing tolerances
THIS DOCUMENT IS PROPERTY OF THE KERITE COMPANY AND CONTAINS PROPRIETARY INFORMATION. ITS
USE IS DISCLOSED IN CONFIDENCE AND IT MAY NOT BE REPRODUCED WITHOUT THE CONSENT OF KERITE.
The Kerite Company, 49 Day Street, Seymour, CT 06483
Telephone 203-888-2591
LTR3 – KERITE®
LTR3
Application Data
Conductor operating temperature recommended guidelines are based on Neher-McGrath
calculations presented in IEEE Std 1018 and 1019
THIS DOCUMENT IS PROPERTY OF THE KERITE COMPANY AND CONTAINS PROPRIETARY INFORMATION. ITS
USE IS DISCLOSED IN CONFIDENCE AND IT MAY NOT BE REPRODUCED WITHOUT THE CONSENT OF KERITE.
The Kerite Company, 49 Day Street, Seymour, CT 06483
Telephone 203-888-2591