221 SERIES LEVER-NUTS®

221 SERIES LEVER-NUTS®
The Next Generation of Compact Splicing Connectors
40% SMALLER 100
WWW.WAGO.COM/221
WAGO 221: COMPACT Splicing Connectors for All Wire Types
Setting new standards in electrical installations, WAGO’s new ‘all-around’ connector
is smaller and even more user friendly than its successful predecessor, the 222 Series.
The 221 Series LEVER-NUTS ® user can:
onnect any combination of solid, stranded, and
isually inspect for proper strip length and complete
•Cflexible
•Vwire
copper wires faster and more reliably
insertion through its transparent housing
space consumption in the junction box —
perate comfortably and with lower operating
•Mbyinimize
•Oforces
40% compared to 222 Series
by using familiar orange levers
Wire Stripped
Properly
Easily combine various types and sizes of wires
●
AWG 24 - 12 solid, standed, flexible
●
0.14 - 4 mm2 ″f-st″
●
0.2 - 4 mm2 ″s+st″
l
Wire Inserted Properly
L
Two Test
Slots
0% TRANSPARENT
AWG 24 - 12
600 V
105 °C operating temp
L 11mm / 0.43 in
0.14 - 4 mm2 ″f - st″ AWG 24 - 12
0.2 - 4 mm2 ″s + st″ 600 V
400 V / 4 kv / 2 105 °C operating temp
I 32A
L 11mm / 0.43 in
N
2 - conductor connector, with levers
Item No.
Pack Unit (subpack unit)
221-412
221 - 412 / VE00 - 2500
0.14 - 4 mm2 ″f - st″ AWG 24 - 12
0.2 - 4 mm2 ″s + st″ 600 V
400 V / 4 kv / 2 105 °C operating temp
I 32A
L 11mm / 0.43 in
N
3 - conductor connector, with levers
Item No.
1000(10x100) 221-413
2500 (bulk) 221 - 413 / VE00 - 2500
0.14 - 4 mm2 ″f - st″
0.2 - 4 mm2 ″s + st″
400 V / 4 kv / 2
I 32A
Pack Unit (subpack unit)
N
5 - conductor connector, with levers
Item No.
Pack Unit (subpack unit)
500(10 x 50) 221-415
250(10 x 25)
2500 (bulk) 221 - 415 / VE00 - 1000
1000 (bulk)
"
"
"
•Nominal current: 20 A
voltage:
600Series
V
CT Splicing Connectors for All Conductor
Types,
221
•Nominal
temperature:
105Series
°C
•OperatingTypes,
ption
and Handling
–
COMPACT
SplicingConnectors
Connectors
forAll
AllConductor
Conductor
Types,221
221
COMPACT
Splicing
for
Series
2 ––Description
Descriptionand
andHandling
Handling––
Volume 1
8
How it Works
Strip conductor to 11mm - refer to sprip length
Lift lever to open clamping unit;
Lower the lever to close the clamping unit
guide
printed
on
side
of
connector
insert
stripped
conductor
Strip conductor to 11 mm / 0.43 in.
Then lower lever to close the clamp.
Conductor termination: Open clamping unit using the
11 mm
/ 0.43 in.to 11 mm / 0.43 in.
leverlever
to close
thethe
clamp.
Conductor termination:
Open
clamping
usingunit
theusing the Then lower
Strip conductor
Then lower
to close
clamp.
Conductor
Open unit
clamping
lever andtermination:
insert conductor.
lever and insert
conductor.
lever
and insert conductor.
Printed in the United States
0888-0832/0000-0347
60279995
WAGO Corporation
N120 W19129 Freistadt Road
Germantown, Wisconsin 53022
Telephone: 800 / DIN Rail (346-7245)
Fax: 262 / 255-3232
[email protected]
www.wago.us
Canada
WAGO Corporation
Tel. 800/DIN Rail (346-7245)
Fax 262/255-3232
www.wago.ca
Mexico
WAGO Corporation
Queretaro
Tel. 001/800/309/5975
+ 52/442/221/5946
Fax + 52/442/221/5063
www.wago.mx