ALPHA™ - Romac

Transcription

ALPHA™ - Romac

April 21, 2016
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™
Wide Range Restrained Joint
MADE IN U.S.A.
™
R E S T R A I N E D
J O I N T
• Standard Alpha fits PVC through
Ductile Iron pipe diameters.
• Alpha XL fits Ductile Iron through
Oversize Cast Iron pipe diameters.
• One piece, stab-fit installation.
• Cast components are high strength ductile iron.
• Working pressure: up to 350 psi.
• Accommodates up to 8 degrees of
deflection (4 degrees on each end).
• Manufactured in the U.S.A.
• Patents Pending.
• Alpha is approved for use on:
Ductile iron
Cast iron (Classes A, B, C & D)
PVC IPS size (Sch 40, Sch 80 & SDR 21)
PVC C900 and C909
HDPE: SDR 9, 11, 13.5 & 17, no pipe stiffener required.*
HDPE: SDRs greater than 17, pipe stiffener required.*
For other pipe materials, contact Romac at 1.800.426.9341.
*The original Alpha (w/black grippers) is incompatible
with HDPE pipe.
STANDARD ALPHA
Standard Alpha fits IPS PVC
through DI pipe diameters.
ALPHA XL
Alpha XL fits DI through
Oversize Cast Iron pipe OD's.
I N S TA L L AT I O N T I M E I S A F R A C T I O N O F O T H E R R E S T R A I N T M E T H O D S
6” SLEEVE AND T WO
MJ RESTRAINERS
30
Minutes to install
29 Total parts to assemble
12 T-Bolts to torque
9 Radial bolts to torque
2 Gaskets to seat
6” COUPLING PLUS
RESTRAINT SYSTEM
35
Minutes to install
33 Total parts to assemble
5 Coupling bolts to torque
4 Clamping bolts to torque
2 Gaskets to seat
ALPHA
3
Minutes
to install
1 2Total
Partsto(zero
assembly).
Nuts
torque
2 NutsPiece
to tighten.
1
(stab-fit)
3 0Guess-work
Minutes to install.
ALPHA - 1
December 16, 2015
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™
Wide Range Restraint Coupling
MADE IN U.S.A.
Material Specifications
CASTINGS: All cast components (end rings, center
ring and bolt guides) are ductile iron, meeting or
exceeding the requirements of ASTM A 536, grade
65-45-12.
GRIPPERS: Ductile (nodular) iron, meeting or
exceeding ASTM A 536, grade 65-45-12. Machine
sharpened and heat treated. Xylan 1424 coated for
corrosion protection.
GASKET: SBR per ASTM D2000 - classified by UL
to meet NSF61, compounded for water and sewer
service. NSF61 certified NBR gaskets and other
compounds available upon request.
DRAW-HOOK FASTENERS: 304L stainless steel.
RAMP RUNNERS: Reinforced nylon.
BOLTS & NUTS: 304 stainless steel, 5/8-11 bolts
with heavy hex e-coated nuts. Fasteners provided
with anti-galling protection.
COATINGS: Center ring fusion bonded epoxy
Romacoat, NSF 61 certified. End rings are
Romabond polyester.
STANDARD ALPHA
Fits IPS PVC through Ductile Iron pipe OD's.
WORKING PRESSURE: up to 350 PSI.
™
R E S T R A I N E D
O.D. RANGE
(inches)
NOMINAL
PIPE SIZE
J O I N T
CATALOG
NUMBER
A
O.D.
DIMENSIONS
B
LENGTH
C
HEIGHT
LIST PRICE
APPROX.
WEIGHT
(lbs.)
4"
4.50- 4.90
ALPHA-A - 4.90
9.18
11.85
10.53
$370.00
40
6"
6.60- 7.00
ALPHA-A - 7.00
10.33
11.98
12.77
480.00
50
8"
8.60- 9.10
ALPHA-A - 9.10
13.45
13.19
15.67
545.00
75
10"
10.75 -11.20
ALPHA-A - 11.20
15.54
12.74
17.61
705.00
95
12"
12.75-13.30
ALPHA-A - 13.30
17.59
13.30
19.73
830.00
100
To Order: Determine the O.D. of the pipes to be coupled, and select coupling size which covers the pipe diameters of both pipe ends.
Specify Alpha Catalog Number [shaded number in table above]. Example: For 8" DI and 8" IPS PVC Pipe, order ALPHA-A-9.10
ALPHA - 2
December 16, 2015
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™ XL
MADE IN U.S.A.
Alpha Configurations for Ductile Iron through Oversize Cast Iron Pipe
CASTINGS: All cast components (end rings, center
ring and bolt guides) are ductile iron, meeting or
exceeding the requirements of ASTM A 536, grade
65-45-12.
sharpened and heat treated. Xylan 1424 coating for
corrosion protection.
GASKETS: Nitrile butadiene rubber (NBR)
compounded for water and sewer service in
accordance with ASTM D2000. NSF 61 Certififed.
DRAW-HOOK FASTENERS: 304L stainless steel.
BOLTS & NUTS: 304 stainless steel, 5/8-11 bolts
COATINGS: Center ring fusion bonded epoxy
Romacoat, NSF 61 certified End rings are
Romabond polyester.
ALPHA XL
Fits Ductile Iron through Oversize Cast Iron pipe OD's.
™
R E S T R A I N E D
NOMINAL
PIPE SIZE
O.D. RANGE
(inches)
J O I N T
CATALOG
NUMBER
A
O.D.
DIMENSIONS
B
LENGTH
C
HEIGHT
LIST PRICE
APPROX.
WEIGHT
(lbs.)
4"
4.80- 5.10
ALPHA XL - 5.10
9.18
11.85
10.53
$385.50
40
6"
6.90- 7.20
ALPHA XL- 7.20
10.33
11.98
12.77
499.50
50
8"
9.05- 9.40
ALPHA XL - 9.40
13.45
13.19
15.67
567.50
75
10"
11.10 -11.45 ALPHA XL - 11.45
15.54
12.74
17.61
733.50
95
12"
13.20-13.60 ALPHA XL - 13.60
17.59
13.30
19.73
863.50
100
To Order: Determine the O.D. of the pipes to be coupled, and select gasket range which covers the pipe diameters of each pipe end.
Specify the Alpha Gasket Range [shaded number in table above]. Example: For 8" DI and 8" OS Cast Iron pipe, order ALPHA XL - 9.40
ALPHA - 3
December 16, 2015
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™ END CAP
Restrained End Cap
MADE IN U.S.A.
CASTINGS: All cast components (end rings,
center ring and bolt guides) are ductile iron,
meeting or exceeding the requirements of ASTM
A 536, grade 65-45-12.
GRIPPERS: Ductile (nodular) iron, meeting
or exceeding ASTM A 536, grade 65-45-12.
Machine sharpened and heat treated. Xylan
1424 coated for corrosion protection.
GASKET: SBR per ASTM D2000 - classified by
UL to meet NSF61, compounded for water and
sewer service. NSF61 certified NBR gaskets
and other compounds available upon request.
DRAW-HOOK FASTENERS: 304L stainless
steel.
BOLT & NUT: R-Blue. HSLA. Xylan coated to
reduce friction and provide corrosion resistance.
For details, see catalog page 9-3.
WASHER: 304 Stainless steel.
STANDARD ALPHA END CAP
COATINGS: End cap fusion bonded epoxy
Romacoat, NSF 61 certified. End rings are
Romabond polyester.
™
RESTRAINED END CAP
DIMENSIONS
A
B
C
O.D.
LENGTH HEIGHT
APPROX.
WEIGHT
(lbs.)
O.D. RANGE
(inches)
CATALOG NUMBER
4"
4.50 - 4.90
ALPHA-EC - 4.90
10.20
7.15
9.70
$226.00
21
6"
6.60 - 7.00
ALPHA-EC - 7.00
11.35
7.75
11.90
290.00
30
8"
8.60 - 9.10
ALPHA-EC - 9.10
13.40
9.45
15.00
398.00
52
10"
10.75 - 11.20
ALPHA-EC - 11.20
15.45
9.75
17.10
634.00
63
12"
12.75 - 13.30
ALPHA-EC - 13.30
17.50
10.10
19.15
709.00
78
NOMINAL
PIPE SIZE
To Order: Determine the O.D. of the pipe to be capped, and select end cap size which covers the pipe
diameter. Specify Alpha EC Catalog Number [shaded number in table above].
Example: For 8" DI or 8" IPS PVC pipe, order ALPHA-EC -9.10
ALPHA - 4
LIST PRICE
December 16, 2015
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™ XL END CAP
Restrained End Cap
MADE IN U.S.A.
meeting or exceeding the requirements of
ASTM A 536, grade 65-45-12.
GASKET: Nitrile butadiene rubber (NBR)
accordance with ASTM D2000. NSF61
certified.
steel.
BOLT & NUT: R-Blue. HSLA. Xylan coated
to reduce friction and provide corrosion
resistance. For details, see catalog page 9-3.
ALPHA XL
COATINGS: End cap fusion bonded epoxy
Romacoat, NSF 61 certified End rings are
Romabond polyester.
™
RESTRAINED END CAP
DIMENSIONS
A
B
C
O.D.
LENGTH HEIGHT
LIST PRICE
APPROX.
WEIGHT
(lbs.)
9.70
$235.50
21
7.75
11.90
302.50
30
13.40
9.45
15.00
414.50
52
17.10
659.50
63
19.15
737.50
78
NOMINAL
PIPE SIZE
O.D. RANGE
(inches)
CATALOG NUMBER
4"
4.80 - 5.10
ALPHA EC XL - 5.10
10.20
7.15
6"
6.90 - 7.20
ALPHA EC XL- 7.20
11.35
8"
9.05 - 9.40
ALPHA EC XL - 9.40
10"
11.10 - 11.45
ALPHA EC XL - 11.45
15.45
9.75
12"
13.20 - 13.60
ALPHA EC XL - 13.60
17.50
10.10
Example: For 8" DI or 8" OS Cast Iron pipe, order ALPHA-EC -9.40
ALPHA - 5
April 21, 2016
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™ FC
Restrained Flanged Coupling
MADE IN U.S.A.
meeting or exceeding the requirements of ASTM
A 536, grade 65-45-12.
sharpened and heat treated. Xylan 1424 coated
for corrosion protection.
GASKET: SBR per ASTM D2000 - classified by
UL to meet NSF61, compounded for water and
sewer service. NSF61 certified NBR gaskets and
other compounds available upon request. O-Ring
style flange gasket is NBR per ASTM D2000.
steel.
BOLT & NUT: 304 stainless steel, 5/8-11 bolts
COATINGS: Flanged coupling body fusion
bonded epoxy Romacoat, NSF 61 certified. End
rings are Romabond polyester.
STANDARD ALPHA FC
™
RESTRAINED FLANGED COUPLING
NOMINAL
PIPE SIZE
O.D. RANGE
(inches)
CATALOG NUMBER
DIMENSIONS
A
B
C
O.D.
LENGTH HEIGHT
LIST PRICE
$252.00
4"
4.50 - 4.90
ALPHA-FC - 4.90
11.20
8.15
10.25
6"
6.60 - 7.00
ALPHA-FC - 7.00 11.35
8.24
8"
8.60 - 9.10
ALPHA-FC - 9.10 13.40
10"
10.75 - 11.20
ALPHA-FC - 11.20
12"
12.75 - 13.30
ALPHA-FC - 13.30
29
12.45
322.00
40
9.96
15.55
432.00
57 15.45
10.18
17.65
698.00
82
17.50
10.28
19.70
782.00
105
Example: To cap an 8" DI or 8" IPS PVC pipe, order ALPHA-EC -9.10
ALPHA - 6
APPROX.
WEIGHT
(lbs.)
April 21, 2016
ROMAC
INDUSTRIES,
INC.
1-800-426-9341
www.romac.com
ALPHA ™ XL FC
Restrained Flanged Coupling
MADE IN U.S.A.
meeting or exceeding the requirements of
ASTM A 536, grade 65-45-12.
GASKET: Nitrile butadiene rubber (NBR)
accordance with ASTM D2000. NSF61
certified. O-Ring style flange gasket is NBR
per ASTM D2000.
steel.
BOLT & NUT: 304 stainless steel, 5/811 bolts with heavy hex e-coated nuts.
Fasteners provided with anti-galling
protection.
COATINGS: Flanged coupling body fusion
bonded epoxy Romacoat, NSF 61 certified.
End rings are Romabond polyester.
ALPHA XL FC
™
RESTRAINED FLANGED COUPLING
NOMINAL
PIPE SIZE
O.D. RANGE
(inches)
CATALOG NUMBER
DIMENSIONS
A
B
C
O.D.
LENGTH HEIGHT
LIST PRICE
APPROX.
WEIGHT
(lbs.)
4"
4.80 - 5.10
ALPHA FC XL - 5.10
11.20
8.15
10.25
$262.50
29
6"
6.90 - 7.20
ALPHA FC XL- 7.20 11.35
8.24
12.45
335.50
40
8"
9.05 - 9.40
ALPHA FC XL - 9.40 13.40
9.96
15.55
449.50
57 10"
11.10 - 11.45
ALPHA FC XL - 11.45
15.45
10.18
17.65
726.50
82
13.20-13.60 ALPHA FC XL - 13.60
17.50
10.28
19.70 813.50
105
12"
Example: To cap an 8" DI or 8" IPS PVC pipe, order ALPHA-EC -9.10
ALPHA - 7

ALPHA™ - Romac

Transcription

Similar documents

Alpha Industries - A Choice of Heroes (English)

Alpha`s Student achievements - Providence Heights Alpha School

Short Automatic Bar Feeder

The New American Home

Fernco Flexible Coupling Installation - Fernco

Hymax Couplings 1.5

How the Game is played

Fernco Flexible Coupling Installation - Fernco

Aviva Stadium