R 70 Technical Data.

Transcription

Service brake.
Driver’s compartment.
Service brake.
working position for any physique.
– The driver is protected from vibrations which could damage
his health by the
– resiliently mounted drive unit
– rubber mounting for driver’s compartment
– damped seat, adjustable to the driver’s weight.
Electrics.
The modern electrical system works digitally. The exchange
of information between electrical assemblies, e.g. between
the drive controller and the cockpit, is achieved using the
CAN bus system already used successfully in road vehicles.
The number of cables and plug connectors is reduced in
comparison with the previous system and the reliability
increased. In addition to this, the ease with which additional
electrical equipment can be fitted is greatly enhanced.
Constant research and development have decisively improved
the driver’s compartment in the R 70:
– The cockpit has an LCD display plus a pre-selection facility
for the drive characteristics. The driver can select the most
suitable acceleration or braking and travel speeds from five
pre-set options. Simple changes to the software allow the
drive parameters to be adjusted to suit the application
conditions and the turnover of goods.
– Foot pedals arranged as they are in a car.* No familiarisation
needed.
– The driving characteristics of the R 70 allow the truck to be
held on a gradient or on uneven roadways without touching
the hand or foot brakes. This means, for example, less
damage when loading or unloading lorries.
– Roomy foot well with inclined floor plate and non-slip rubber
matting.
– Automotive style hand brake is fitted to the right of the
driver’s seat.
– Operation is made simpler and easier for the driver because
driving and braking are regulated with just the drive pedal.
– Adjustable steering column plus longitudinal and rake
adjustment of the seat provide an extremely comfortable
Mast.
STILL clear view masts in Telescopic, HiLo and Triplex designs
for every application:
– Telescopic: The mast suitable for most applications.
Economical mast design. The hoist chains are run in
protective guide rails. This prevents noise and increases
chain life.
– HiLo: For high stacking under low ceilings. Utilises the
space right up to the roof.
– Triplex: For applications with low doorways and greater
stacking heights. Utilises the space right up to the roof.
– Fork carriage: Completely redesigned for this truck, gives a
clear view onto the load being picked up, thanks to its
optimised profiles. The hydraulic hoses for attachments are
run in the dead visibility area of the mast sections – with no
hose reels – for wear-free operation.
Steering.
The free moving, fully hydraulic power steering provides great
manoeuvrability and thus a high turn round of goods.
Overhead guard.
The overhead guard is available in different designs so that
the R 70 is adaptable to the widest variety of applications and
driver requirements. A cab can be easily retro-fitted to the
version of the R 70 with a roof cover.
Safety.
The STILL clear view mast and good all round visibility give
the driver the best security against running into objects.
The new R 70 complies with all applicable EC safety
requirements and regulations. It thus carries the “CE” symbol.
Quality.
All forklift trucks from STILL comply with the ISO 9001 quality
standard. They are carefully constructed and manufactured.
The materials used are checked to stringent standards.
* available with twin pedal control if required.
Further information on the R 70 is available
on our website: www.still.de/R70
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
R 70 16 20 c 11 e 05/05 TD Subject to technical modifications.
– The service brake is a maintenance-free, multiple disc brake
which runs in an oil bath and is thus free of wear. The truck
is silent in operation and will never need new brake linings.
– The multiple disc brake is encapsulated to protect it from
dirt and water.
– Re-adjustment is a thing of the past.
– Thanks to the maintenance-free, silent, multiple disc brake,
the normal servicing costs for brakes are done away with.
This means that overall maintenance costs on the R 70-20
compact are reduced by up to 30%.
Diesel and LP Gas Trucks
R 70–16 compact
R 70–18 compact
R 70–20 compact
Achieve more.
α
Capacity Chart R 70-16 Tele and Triple mast – pneumatic
Q
1800
b3
m1
m2
A st
A st
Wa
b13
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
kW
1/min
cm3
l/h
bar
l/min
dB(A)
capacity in kg
h6
200
3000
5000
7000
h7
l2
1800
1600
m2
y
Q
c = 500 mm
b11
2000
1600
c = 800 mm
1200
c = 1000 mm
800
400
4000
5000
4030-4330
2560-2710
HiLo mast
4430-5430
2760-3260
150
3280-3480
3/6
2630-2830
1860-1960
3280-3480
3/6
2550-2750
3200-3400
3/6
3580-4580
3/9*
1084
927
4680-4980
3/6
2148
368
3495/3695
2930-3930
4030-4330
2010-2510
2560-2710
150
3580-4580
4680-4980
3/9*
3/6
1084
927
2188
368
3530/3730
2850-3850
3950-4150
2010-2510
2560-2660
150
3500-4500
4600-4800
3/9*
3/6
1098
903
2275
379
3617/3817
5080-6080
3/6
1164
1007
4430-5430
2760-3260
5080-6080
3/6
1164
1007
4250-5350
2710-3260
4900-6000
3/6
1178
990
2775-2875
1860-1910
1230-1280
3425-3525
3/6
1084
927
2148
368
3495/3695
2675-2775
1860-1910
1212-1262
3343-3443
3/6
2670-2770
1860-1910
1230-1280
3320-3420
3/6
2875-3975
1960-2510
1312-1862
3543-4643
3/9*
1084
927
2188
368
3530/3730
2870-3870
1960-2460
1330-1830
3520-4520
3/9*
1098
903
2275
379
3617/3817
* with front screen max. backwards tilt 6°
3970-4370
2510-2710
1880-2080
4620-5020
3/6
8000
6000
7000
c = 500 mm
c = 600 mm
c = 800 mm
c = 1000 mm
400
3000
8000
4000
5000
6000
7000
8000
rated lift in mm
Capacity Chart R 70-20c Tele and Triple mast – SE tyres
2200
Triple mast
2975-4075
1960-2510
1330-1880
3625-4725
3/9*
7000
load centre (mm)
rated lift in mm
Telescopic mast
6000
800
2000
2930-3930
2010-2510
5000
Capacity Chart R 70-18 Tele and Triple mast – SE tyres
load centre (mm)
3000
4000
rated lift in mm
Q
2630-2830
1860-1960
c = 1000 mm
3000
Mast types.
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
c = 800 mm
200
c = 600 mm
1200
capacity in kg
l1
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
c = 600 mm
600
9000
h10
m1
x
b10
76
pin
h2
76
pin
1000
load centre (mm)
c = 500 mm
rated lift in mm
s
76
pin
1400
c = 600 mm
c = 800 mm
c = 1000 mm
c
e
Stilltronic
230
c = 500 mm
600
Q
fork spacing
adjustable
Stilltronic
250
adjustable
seat
+_ 90 mm
m
h3
Stilltronic
230
Q
h5
22
22
0.51
0.57
0.6
0.47
12000
7180
27
25
4.7
4.2
electric / hydraulic
Volkswagen
ADG
ADF
33
34
2600
4
1896
1800
h4
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.6
4.1
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
0m
h1
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.5
4
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
+_ 8
b1
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
1000
R 70-16 (T)
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
STILL
R 70-18 R 70-18 T R 70-20 C R 70-20 C
diesel
LPG
diesel
LPG
rider seated
rider seated
1800
2000
500
500
368
379
1450
1495
2800
3090
4065
4464
505
626
1220
1292
1580
1798
SE/L
SE
18 x 7-8 (16 PR)
200/50-10
18 x 7-8 (16 PR)
18 x 7-8
2x
2x
2
2
927
903
895
895
3
3
9
9
2210
2260
150
150
3330
3350
3980
4000
2070
2070
980
980
465
465
2988
3075
2188
2275
1048
1098
40
40
80
80
800
800
ISO II B
ISO II B
1040
1040
82
94
120
120
3530
3617
3730
3817
1962
2038
R 70-18 (T)
Q
c
x
y
STILL
R 70-16 R 70-16 T
diesel
LPG
rider seated
1600
500
368
1450
2640
3780
460
1220
1420
SE/L
18 x 7-8 (16 PR)
18 x 7-8 (16 PR)
2x
2
927
895
3
9
2210
150
3330
3980
2070
980
465
2948
2148
1048
40
80
800
ISO II B
1040
84
120
3495
3695
1927
R 70-20 compact
Engine
Other
Manufacturer
Manufacturer’s model designation
Power supply – electric, diesel, petrol, gas, mains electric
Type of control – hand, pedestrian, stand-on, rider seated
Carrying capacity / load
Load centre
Load distance
Wheelbase
Weight
Axle loadings laden front
Axle loadings laden rear
Axle loadings unladen front
Axle loadings unladen rear
Tyres – rubber (V), superelastic (SE), pneumatic (L), polyurethane (PE)
Tyre size – front
Tyre size – rear
Wheels – number front (x = drive wheel)
Wheels – number rear (x = drive wheel)
Track width – front
Track width – rear
Tilt angle, mast / fork carriage forwards
Tilt angle, mast / fork carriage backwards
Closed height
Free lift
Lift height
Height, mast raised
Height to top of overhead guard (cabin)
Seat height
Coupling height
Overall length
Length to front face of forks
Overall width
Fork thickness
Fork width
Fork length
Fork carriage to DIN 15173 – class / form A or B
Fork carriage width
Ground clearance beneath mast, laden
Ground clearance at centre of wheelbase
Aisle width for pallets 1000 x 1200 wide
Aisle width for pallets 800 x 1200 long
Outer turning radius
Inner turning radius
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Lowering speed laden
Lowering speed unladen
Rated drawbar pull laden
Rated drawbar pull unladen
Gradeability laden
Gradeability unladen
Acceleration time laden
Acceleration time unladen
Brakes
Engine manufacturer
Type
Engine rated power to ISO 1585
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
Operating pressure for attachments
Oil flow for attachments
Average noise peak at operator’s ears
Trailer coupling, type / DIN
2000
1800
a
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
Q
load centre (mm)
W
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
1400
capacity in kg
l
capacity in kg
The models depicted in this brochure may contain
special parts or attachments which are not supplied
as standard.
4020-8020
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2169
389
3516/3716
3870-7870
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2209
389
3551/3751
3865-8065
1860-3260
1230-2630
4530-8730
3/6
1178
990
2298
401
3639/3839
* with spotlight on top 1° less backwards tilt
1600
load centre (mm)
c = 500 mm
c = 600 mm
c = 800 mm
1200
Drive.
The engine powers a generator which in turn provides current
to the drive motor via an electronic speed and power regulator.
This electric drive has the following advantages:
– The truck holds the speed set by the foot pedal. It makes
no difference whether it is travelling up hill or down. This
makes for safe driving and simplifies operation.
– Because the travel speed is controlled independently of the
lift speed, fast hoisting and slow driving (inching) can take
place at the same time without special equipment. This is
completely free of wear, saves on operating costs and
simplifies operation.
– Wear free braking down to a standstill and holding the truck
in position when at rest is achieved through the drive. Even
when the floor is far from level, the R 70 will remain
stationary until the drive pedal is depressed. Holding the
truck with the brake pedal is not necessary. This simplicity
of operation reduces strain on the driver, who can
concentrate fully on positioning the fork tips or the load.
– A higher turn round of goods and greater safety are benefits
of the STILL drive unit with electronic speed and
capacity in kg
In accordance with VDI guidelines 2198, this specification applies to the standard model only.
Alternative tyres, mast types, ancillary equipment, etc. could result in different values.
β
c = 1000 mm
800
400
3000
5000
7000
8000
rated lift in mm
Triple mast
Telescopic mast
acceleration control. At any time the driver can adjust the
driving characteristics to suit changing load or application
conditions, or to satisfy safety requirements, e.g. for the
transport of pallets of drinks.
– Resilient engine mountings mean that no vibrations are
transmitted to the truck.
– The inherent qualities of electric drive: high reliability, long
life and low maintenance costs.
α
Q
1800
b3
m1
m2
A st
A st
Wa
b13
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
kW
1/min
cm3
l/h
bar
l/min
dB(A)
capacity in kg
h6
200
3000
5000
7000
h7
l2
1800
1600
m2
y
Q
c = 500 mm
b11
2000
1600
c = 800 mm
1200
c = 1000 mm
800
400
4000
5000
4030-4330
2560-2710
HiLo mast
4430-5430
2760-3260
150
3280-3480
3/6
2630-2830
1860-1960
3280-3480
3/6
2550-2750
3200-3400
3/6
3580-4580
3/9*
1084
927
4680-4980
3/6
2148
368
3495/3695
2930-3930
4030-4330
2010-2510
2560-2710
150
3580-4580
4680-4980
3/9*
3/6
1084
927
2188
368
3530/3730
2850-3850
3950-4150
2010-2510
2560-2660
150
3500-4500
4600-4800
3/9*
3/6
1098
903
2275
379
3617/3817
5080-6080
3/6
1164
1007
4430-5430
2760-3260
5080-6080
3/6
1164
1007
4250-5350
2710-3260
4900-6000
3/6
1178
990
2775-2875
1860-1910
1230-1280
3425-3525
3/6
1084
927
2148
368
3495/3695
2675-2775
1860-1910
1212-1262
3343-3443
3/6
2670-2770
1860-1910
1230-1280
3320-3420
3/6
2875-3975
1960-2510
1312-1862
3543-4643
3/9*
1084
927
2188
368
3530/3730
2870-3870
1960-2460
1330-1830
3520-4520
3/9*
1098
903
2275
379
3617/3817
3970-4370
2510-2710
1880-2080
4620-5020
3/6
8000
6000
7000
c = 500 mm
c = 600 mm
c = 800 mm
c = 1000 mm
400
3000
8000
4000
5000
6000
7000
8000
rated lift in mm
2200
Triple mast
2975-4075
1960-2510
1330-1880
3625-4725
3/9*
7000
load centre (mm)
rated lift in mm
Telescopic mast
6000
800
2000
2930-3930
2010-2510
5000
load centre (mm)
3000
4000
rated lift in mm
Q
2630-2830
1860-1960
c = 1000 mm
3000
Mast types.
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
c = 800 mm
200
c = 600 mm
1200
capacity in kg
l1
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
c = 600 mm
600
9000
h10
m1
x
b10
76
pin
h2
76
pin
1000
load centre (mm)
c = 500 mm
rated lift in mm
s
76
pin
1400
c = 600 mm
c = 800 mm
c = 1000 mm
c
e
Stilltronic
230
c = 500 mm
600
Q
fork spacing
adjustable
Stilltronic
250
adjustable
seat
+_ 90 mm
m
h3
Stilltronic
230
Q
h5
22
22
0.51
0.57
0.6
0.47
12000
7180
27
25
4.7
4.2
Volkswagen
ADG
ADF
33
34
2600
4
1896
1800
h4
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.6
4.1
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
0m
h1
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.5
4
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
+_ 8
b1
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
1000
R 70-16 (T)
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
STILL
R 70-18 R 70-18 T R 70-20 C R 70-20 C
diesel
LPG
diesel
LPG
rider seated
rider seated
1800
2000
500
500
368
379
1450
1495
2800
3090
4065
4464
505
626
1220
1292
1580
1798
SE/L
SE
18 x 7-8 (16 PR)
200/50-10
18 x 7-8 (16 PR)
18 x 7-8
2x
2x
2
2
927
903
895
895
3
3
9
9
2210
2260
150
150
3330
3350
3980
4000
2070
2070
980
980
465
465
2988
3075
2188
2275
1048
1098
40
40
80
80
800
800
ISO II B
ISO II B
1040
1040
82
94
120
120
3530
3617
3730
3817
1962
2038
R 70-18 (T)
Q
c
x
y
STILL
R 70-16 R 70-16 T
diesel
LPG
rider seated
1600
500
368
1450
2640
3780
460
1220
1420
SE/L
18 x 7-8 (16 PR)
18 x 7-8 (16 PR)
2x
2
927
895
3
9
2210
150
3330
3980
2070
980
465
2948
2148
1048
40
80
800
ISO II B
1040
84
120
3495
3695
1927
R 70-20 compact
Engine
Other
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
2000
1800
a
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
Q
load centre (mm)
W
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
1400
capacity in kg
l
capacity in kg
as standard.
4020-8020
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2169
389
3516/3716
3870-7870
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2209
389
3551/3751
3865-8065
1860-3260
1230-2630
4530-8730
3/6
1178
990
2298
401
3639/3839
1600
load centre (mm)
c = 500 mm
c = 600 mm
c = 800 mm
1200
Drive.
capacity in kg
β
c = 1000 mm
800
400
3000
5000
7000
8000
rated lift in mm
Triple mast
Telescopic mast
α
Q
1800
b3
m1
m2
A st
A st
Wa
b13
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
kW
1/min
cm3
l/h
bar
l/min
dB(A)
capacity in kg
h6
200
3000
5000
7000
h7
l2
1800
1600
m2
y
Q
c = 500 mm
b11
2000
1600
c = 800 mm
1200
c = 1000 mm
800
400
4000
5000
4030-4330
2560-2710
HiLo mast
4430-5430
2760-3260
150
3280-3480
3/6
2630-2830
1860-1960
3280-3480
3/6
2550-2750
3200-3400
3/6
3580-4580
3/9*
1084
927
4680-4980
3/6
2148
368
3495/3695
2930-3930
4030-4330
2010-2510
2560-2710
150
3580-4580
4680-4980
3/9*
3/6
1084
927
2188
368
3530/3730
2850-3850
3950-4150
2010-2510
2560-2660
150
3500-4500
4600-4800
3/9*
3/6
1098
903
2275
379
3617/3817
5080-6080
3/6
1164
1007
4430-5430
2760-3260
5080-6080
3/6
1164
1007
4250-5350
2710-3260
4900-6000
3/6
1178
990
2775-2875
1860-1910
1230-1280
3425-3525
3/6
1084
927
2148
368
3495/3695
2675-2775
1860-1910
1212-1262
3343-3443
3/6
2670-2770
1860-1910
1230-1280
3320-3420
3/6
2875-3975
1960-2510
1312-1862
3543-4643
3/9*
1084
927
2188
368
3530/3730
2870-3870
1960-2460
1330-1830
3520-4520
3/9*
1098
903
2275
379
3617/3817
3970-4370
2510-2710
1880-2080
4620-5020
3/6
8000
6000
7000
c = 500 mm
c = 600 mm
c = 800 mm
c = 1000 mm
400
3000
8000
4000
5000
6000
7000
8000
rated lift in mm
2200
Triple mast
2975-4075
1960-2510
1330-1880
3625-4725
3/9*
7000
load centre (mm)
rated lift in mm
Telescopic mast
6000
800
2000
2930-3930
2010-2510
5000
load centre (mm)
3000
4000
rated lift in mm
Q
2630-2830
1860-1960
c = 1000 mm
3000
Mast types.
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
h3
h1
h 2 /h 5
h4
v/h
b1
b10
l2
x
Ast
c = 800 mm
200
c = 600 mm
1200
capacity in kg
l1
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
Rated lift
Closed mast height
Free lift
Raised mast height
Angle of tilt
Overall width
Track width, front
Overall length
Load distance
Working aisle width
c = 600 mm
600
9000
h10
m1
x
b10
76
pin
h2
76
pin
1000
load centre (mm)
c = 500 mm
rated lift in mm
s
76
pin
1400
c = 600 mm
c = 800 mm
c = 1000 mm
c
e
Stilltronic
230
c = 500 mm
600
Q
fork spacing
adjustable
Stilltronic
250
adjustable
seat
+_ 90 mm
m
h3
Stilltronic
230
Q
h5
22
22
0.51
0.57
0.6
0.47
12000
7180
27
25
4.7
4.2
Volkswagen
ADG
ADF
33
34
2600
4
1896
1800
h4
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.6
4.1
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
0m
h1
22
22
0.54
0.58
0.6
0.45
12000
7180
27
25
4.5
4
Volkswagen
ADG
ADF
30
31
2400
4
1896
1800
+_ 8
b1
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
1000
R 70-16 (T)
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
STILL
R 70-18 R 70-18 T R 70-20 C R 70-20 C
diesel
LPG
diesel
LPG
rider seated
rider seated
1800
2000
500
500
368
379
1450
1495
2800
3090
4065
4464
505
626
1220
1292
1580
1798
SE/L
SE
18 x 7-8 (16 PR)
200/50-10
18 x 7-8 (16 PR)
18 x 7-8
2x
2x
2
2
927
903
895
895
3
3
9
9
2210
2260
150
150
3330
3350
3980
4000
2070
2070
980
980
465
465
2988
3075
2188
2275
1048
1098
40
40
80
80
800
800
ISO II B
ISO II B
1040
1040
82
94
120
120
3530
3617
3730
3817
1962
2038
R 70-18 (T)
Q
c
x
y
STILL
R 70-16 R 70-16 T
diesel
LPG
rider seated
1600
500
368
1450
2640
3780
460
1220
1420
SE/L
18 x 7-8 (16 PR)
18 x 7-8 (16 PR)
2x
2
927
895
3
9
2210
150
3330
3980
2070
980
465
2948
2148
1048
40
80
800
ISO II B
1040
84
120
3495
3695
1927
R 70-20 compact
Engine
Other
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
2000
1800
a
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
Q
load centre (mm)
W
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
1400
capacity in kg
l
capacity in kg
as standard.
4020-8020
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2169
389
3516/3716
3870-7870
1860-3260
1230-2630
4670-8670
3/6
1164
1007
2209
389
3551/3751
3865-8065
1860-3260
1230-2630
4530-8730
3/6
1178
990
2298
401
3639/3839
1600
load centre (mm)
c = 500 mm
c = 600 mm
c = 800 mm
1200
Drive.
capacity in kg
β
c = 1000 mm
800
400
3000
5000
7000
8000
rated lift in mm
Triple mast
Telescopic mast
Service brake.
Service brake.
his health by the
Electrics.
needed.
matting.
driver’s seat.
Mast.
chain life.
Steering.
Overhead guard.
Safety.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
dirt and water.
R 70–16 compact
R 70–18 compact
R 70–20 compact
Achieve more.
Service brake.
Service brake.
his health by the
Electrics.
needed.
matting.
driver’s seat.
Mast.
chain life.
Steering.
Overhead guard.
Safety.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
dirt and water.
R 70–16 compact
R 70–18 compact
R 70–20 compact
Achieve more.
Service Brake.
The service brake is a maintenance free multiple disc brake
which runs in an oil bath and is thus free of wear. It will never
need new brake linings and is also silent in operation.
dirt and water.
– Readjustments are a thing of the past.
– The maintenance free, silent, multiple disc brake does away
with the servicing costs common to other brakes, which
constitute up to 30% of the overall maintenance costs of
a truck.
Electrics.
The state-of-the-art electrical system works digitally. The
exchange of information between electrical assemblies, e.g.
between the drive controller and the cockpit, is achieved
using the CAN bus system already used successfully in many
roadgoing vehicles. The number of cables and plug
connectors is reduced in comparison to the previous system
and the reliability is increased. In addition to this, easier and
more effective servicing is possible using computer diagnosis.
Driver’s Compartment.
– The cockpit has an LCD display and pre-selection facility for
the drive characteristics. The driver can select the best
acceleration and braking characteristics, as well as travel
speeds, from 5 pre-set options. Other adjustments can be
made to the drive parameters to suit the application
conditions and the turn round of goods by simply altering
the software.
– Foot pedals arranged as they are in a car*. No familiarisation
needed.
– Roomy foot well with inclined foot plate and non-slip
rubber matting.
– Adjustable steering column and longitudinal and rake
– The driver is protected from vibrations potentially hazardous
to health by:
– the resiliently mounted drive unit
– the driver’s compartment fitted to the truck frame
with resilient rubber mounts
– the hydraulically damped seat, adjustable to the
driver’s weight.
Diesel Forklift Trucks
R 70–20I
R 70–25I
R 70–30I
Mast.
chain life.
run in the dead visibility area of the mast sections – with
no hose reels – for wear-free operation.
Steering.
The light, fully hydraulic power steering provides great
Overhead Guard.
So that the R 70 is adaptable to the widest variety of
applications and driver requirements, the overhead guard is
available in different designs. Retro-fitting a cab to the R 70
is possible with ease when the truck is already fitted with a
roof cover.
For further information on the R 70
please visit: www.still.de/R70
Safety.
The STILL clear view mast and good all round visibility give the
driver the best security against running into people and
objects. The new R 70 complies with all applicable EC safety
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
R 70 20 30 I 11 e 05/05 TD Subject to technical modifications.
– Diesel-electric drives with ASM technology have a very high
level of availability and are suitable for severe applications
by virtue of the enclosed drive unit and a greatly reduced
number of moving mechanical parts. There is no hydraulic
or mechanical transmission present.
– The benefit of this type of drive lies in completely smooth
and efficient acceleration regardless of the load or external
temperature.
– Using one of 5 drive programs the driver can sensitively
adjust the driving characteristics to different transport
requirements at any time whilst travelling. This increases
both throughput and safety.
– The driver can accelerate and brake with the drive pedal, in
addition to which the R 70 will hold the speed set by the
drive pedal. This means that operation is simplified.
– Fast hoisting and slow driving (inching) can take place at
the same time without special equipment because the travel
speed is controlled independently of the lift speed. This is
the hand or foot brakes.
Achieve more.
The models depicted in this brochure may contain special parts or attachments
which are not supplied as standard.
Capacity Chart R 70-30 Telescopic and HiLo Masts
3000
α
kW
1/ min
cm3
l/h
bar
l/min
dB (A)
24
24
0.57
0.60
0.60
0.53
16570
10920
26
28
5.2
4.6
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
24
24
0.44
0.43
0.60
0.45
16570
11390
22
26
5.5
4.7
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
Dieseltronic
230
Dieseltronic
230
Dieseltronic
230
77
pin
77
pin
77
pin
( ) Twin tyres 23 x 9-10/16 PR
2500
c = 800 mm
2000
c = 1000 mm
1500
Q
2000
Q
h4
adjustable
seat
+_ 90 mm
load centre c = 500 mm
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
1000
capacity in kg
capacity in kg
mm
c
500
1,0
2,0
3,0
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
6,0
7,0
8,0
6,0
7,0
8,0
h6
h3
rated lift in m
c
h5
h7
2500
y
x
s
Q
m2
2500
c = 600 mm
h10
h2
m1
Capacity Chart R 70-25 Triple full free lift
2000
c = 800 mm
1500
c = 1000 mm
Q
Q
1000
l2
e
capacity in kg
l1
c = 600 mm
2000
c = 800 mm
1500
c = 1000 mm
Q
1000
500
capacity in kg
Q
c
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2000
c = 600 mm
c = 800 mm
1500
c = 1000 mm
Q
Wa
2000
c = 600 mm
c = 800 mm
Q
1500
c = 1000 mm
Q
Mast types in use with pneumatic or superelastic tyres.
Width B (single front wheel)
Width B (twin front wheels)
Tilt angle
Rated lift
Height, mast lowered
Height, mast raised
Free lift
Length
Load distance
Working aisle width Ast
Pallet 1000 x 1200 wide | 800 x 1200 long
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm
mm
1180
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820
mm 1850-2100
mm 3130-3630
mm
mm
mm
mm
4001
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
Full free lift (HiLo)
1280
6
9
4120-5120
2750-3250
4765-5765
4075
2920-4020
2150-2700
3730-4830
160
2687
457
4120-5120
2750-3250
4930-5930
4201
1180
6
9
2500-3000
1850-2100
3160-3660
1220-1470
1722
6
12
3100-4200
2150-2700
3760-4860
1570-2070
2552
437
3875
2390-2890
1850-2100
3200-3700
1070-1320
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
Triple full-free-lift
1280
6
9
4300-5300*
2750-3250
4960-5960
2120-2620
1280
1722
3
4190-4690
2750-3000
4993-5500
1970-2220
3430
1850
4255
1070
7630
3250
8455
2470
2712
482
4026
500
8
4075
4226
* R 70-25 only up to rated lift of 4800 mm
Q
1000
c
1,0
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
4201
5,0
Telescopic
2,0
3,0
4,0
rated lift in m
b1
1,0
capacity in kg
24
24
0.57
0.60
0.60
0.53
16570
10820
30
32
5.0
4.5
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
+_ 80
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
1000
l
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
Q
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
Grad
Grad
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 I
diesel
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
SE/L
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
1158
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 I
diesel
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-20/25 I
Q
c
x
y
STILL
R 70-20 I
diesel
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-30 I
Characteristics
Weight
Wheels | tyres
Dimensions
Performance
Engine
Other
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
c = 600 mm
β
2500
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
6,0
1000
500
c
1,0
2,0
3,0
4,0
rated lift in m
5,0
Zwillingsbereifung
Drive.
The R 70 features STILL’s ASM diesel-electric drive technology
– comprising an encapsulated 3-phase asynchronous traction
motor, which gives the customer many benefits:
– Diesel-electric drives are particularly economical for
many reasons
– The fuel itself is optimally utilised even when the diesel
engine is operating under partial load conditions. This
means particularly good consumption figures.
– Maintenance costs are reduced: the engine always runs at
the optimal speed to give the required torque output with
minimal wear; also, the ASM drive is torque output with
minimal wear.
– Wear free braking to a standstill is achieved through the drive,
as is holding the truck in position when at rest. Even when
the floor is sloping or uneven, the R 70 will remain stationary
as long as the driver does not depress the drive pedal.
Holding it with the brake pedal is not necessary. This
simplification of operation takes the strain off the driver and
allows him to concentrate on positioning the fork tips or the load.
– Plugging without tyre wear is possible thanks to the electric
drive controller.
– The R 70 is friendly to the environment thanks to a diesel
engine which always runs within its optimum torque range.
Emissions are reduced to a minimum.
3000
α
kW
1/ min
cm3
l/h
bar
l/min
dB (A)
24
24
0.57
0.60
0.60
0.53
16570
10920
26
28
5.2
4.6
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
24
24
0.44
0.43
0.60
0.45
16570
11390
22
26
5.5
4.7
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
Dieseltronic
230
Dieseltronic
230
Dieseltronic
230
77
pin
77
pin
77
pin
2500
c = 800 mm
2000
c = 1000 mm
1500
Q
2000
Q
h4
adjustable
seat
+_ 90 mm
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
1000
capacity in kg
capacity in kg
mm
c
500
1,0
2,0
3,0
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
6,0
7,0
8,0
6,0
7,0
8,0
h6
h3
rated lift in m
c
h5
h7
2500
y
x
s
Q
m2
2500
c = 600 mm
h10
h2
m1
2000
c = 800 mm
1500
c = 1000 mm
Q
Q
1000
l2
e
capacity in kg
l1
c = 600 mm
2000
c = 800 mm
1500
c = 1000 mm
Q
1000
500
capacity in kg
Q
c
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2000
c = 600 mm
c = 800 mm
1500
c = 1000 mm
Q
Wa
2000
c = 600 mm
c = 800 mm
Q
1500
c = 1000 mm
Q
Tilt angle
Rated lift
Height, mast raised
Free lift
Length
Load distance
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm
mm
1180
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820
mm 1850-2100
mm 3130-3630
mm
mm
mm
mm
4001
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
1280
6
9
4120-5120
2750-3250
4765-5765
4075
2920-4020
2150-2700
3730-4830
160
2687
457
4120-5120
2750-3250
4930-5930
4201
1180
6
9
2500-3000
1850-2100
3160-3660
1220-1470
1722
6
12
3100-4200
2150-2700
3760-4860
1570-2070
2552
437
3875
2390-2890
1850-2100
3200-3700
1070-1320
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
1280
6
9
4300-5300*
2750-3250
4960-5960
2120-2620
1280
1722
3
4190-4690
2750-3000
4993-5500
1970-2220
3430
1850
4255
1070
7630
3250
8455
2470
2712
482
4026
500
8
4075
4226
Q
1000
c
1,0
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
4201
5,0
Telescopic
2,0
3,0
4,0
rated lift in m
b1
1,0
capacity in kg
24
24
0.57
0.60
0.60
0.53
16570
10820
30
32
5.0
4.5
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
+_ 80
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
1000
l
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
Q
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
Grad
Grad
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 I
diesel
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
SE/L
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
1158
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 I
diesel
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-20/25 I
Q
c
x
y
STILL
R 70-20 I
diesel
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-30 I
Characteristics
Weight
Wheels | tyres
Dimensions
Performance
Engine
Other
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
c = 600 mm
β
2500
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
6,0
1000
500
c
1,0
2,0
3,0
4,0
rated lift in m
5,0
Zwillingsbereifung
Drive.
many reasons
minimal wear.
drive controller.
3000
α
kW
1/ min
cm3
l/h
bar
l/min
dB (A)
24
24
0.57
0.60
0.60
0.53
16570
10920
26
28
5.2
4.6
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
24
24
0.44
0.43
0.60
0.45
16570
11390
22
26
5.5
4.7
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
Dieseltronic
230
Dieseltronic
230
Dieseltronic
230
77
pin
77
pin
77
pin
2500
c = 800 mm
2000
c = 1000 mm
1500
Q
2000
Q
h4
adjustable
seat
+_ 90 mm
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
1000
capacity in kg
capacity in kg
mm
c
500
1,0
2,0
3,0
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
6,0
7,0
8,0
6,0
7,0
8,0
h6
h3
rated lift in m
c
h5
h7
2500
y
x
s
Q
m2
2500
c = 600 mm
h10
h2
m1
2000
c = 800 mm
1500
c = 1000 mm
Q
Q
1000
l2
e
capacity in kg
l1
c = 600 mm
2000
c = 800 mm
1500
c = 1000 mm
Q
1000
500
capacity in kg
Q
c
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2000
c = 600 mm
c = 800 mm
1500
c = 1000 mm
Q
Wa
2000
c = 600 mm
c = 800 mm
Q
1500
c = 1000 mm
Q
Tilt angle
Rated lift
Height, mast raised
Free lift
Length
Load distance
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm
mm
1180
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820
mm 1850-2100
mm 3130-3630
mm
mm
mm
mm
4001
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
1280
6
9
4120-5120
2750-3250
4765-5765
4075
2920-4020
2150-2700
3730-4830
160
2687
457
4120-5120
2750-3250
4930-5930
4201
1180
6
9
2500-3000
1850-2100
3160-3660
1220-1470
1722
6
12
3100-4200
2150-2700
3760-4860
1570-2070
2552
437
3875
2390-2890
1850-2100
3200-3700
1070-1320
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
1280
6
9
4300-5300*
2750-3250
4960-5960
2120-2620
1280
1722
3
4190-4690
2750-3000
4993-5500
1970-2220
3430
1850
4255
1070
7630
3250
8455
2470
2712
482
4026
500
8
4075
4226
Q
1000
c
1,0
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
4201
5,0
Telescopic
2,0
3,0
4,0
rated lift in m
b1
1,0
capacity in kg
24
24
0.57
0.60
0.60
0.53
16570
10820
30
32
5.0
4.5
electr. / hydr.
Volkswagen
ADG
33
2600
4
1896
+_ 80
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
1000
l
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
Q
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
Grad
Grad
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 I
diesel
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
SE/L
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
1158
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 I
diesel
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-20/25 I
Q
c
x
y
STILL
R 70-20 I
diesel
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
SE/L
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
R 70-30 I
Characteristics
Weight
Wheels | tyres
Dimensions
Performance
Engine
Other
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
c = 600 mm
β
2500
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
6,0
1000
500
c
1,0
2,0
3,0
4,0
rated lift in m
5,0
Zwillingsbereifung
Drive.
many reasons
minimal wear.
drive controller.
Service Brake.
dirt and water.
a truck.
Electrics.
the software.
needed.
rubber matting.
to health by:
driver’s weight.
R 70–20I
R 70–25I
R 70–30I
Mast.
chain life.
Steering.
Overhead Guard.
roof cover.
Safety.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
temperature.
Achieve more.
Service Brake.
dirt and water.
a truck.
Electrics.
the software.
needed.
rubber matting.
to health by:
driver’s weight.
R 70–20I
R 70–25I
R 70–30I
Mast.
chain life.
Steering.
Overhead Guard.
roof cover.
Safety.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
temperature.
Achieve more.
– Wear free braking is achieved through the drive system:
both to a standstill and then holding the truck in position.
Even on a gradient, the R 70 will remain stationary until the
drive pedal is depressed – holding it with the brake pedal is
not necessary. This simplified operation takes the pressure
off the driver when positioning the forks or the load.
– The driver can electronically adjust the performance
characteristics at any time to suit the job in hand. Thus, he
can adapt his truck to all working conditions and thereby
achieve maximum productivity.
– Resilient engine mounts prevent vibrations being
transmitted through the truck to the driver.
– The R 70 enjoys the high reliability, long life and low
maintenance costs of an electric drive.
– The service brake is a maintenance-free multi-disc brake
which runs in an oil bath and is both wear free and silent in
operation. New brake linings will never be needed.
– The multi-disc brake is encapsulated to protect it from dirt
and water.
– The maintenance-free, silent multi-disc brake does away
constitute up to 30% of the overall maintenance costs.
Electrics.
The digital electrical system allows simple adaptation to
altered operating conditions. The exchange of information
between electrical assemblies, e.g. between the drive
controller and the cockpit, is achieved using the CAN bus
system already used successfully in other types of vehicle.
comparison to the previous system and thus reliability is
increased.
– The cockpit has an LCD display and a facility for the driver
to select from a range of pre-set drive performance levels.
He can select the most suitable acceleration or braking and
travel speeds from 5 pre-set options. Further adjustments
of the drive parameters to suit the application conditions
can be made by simply altering the software.
– Automotive style pedal arrangement*, no driver learning curve.
– Roomy footwell with inclined floor plate and non-slip rubber
matting.
– Automotive style hand brake to the right of the driver’s seat.
– Drive and braking regulated by the drive pedal position
make it simple and easy for the driver.
– Adjustable steering column plus reach and rake adjustment
for the seat provide an extremely comfortable working
position for any physique.
his health by the
– hydraulically damped seat, adjustable to the driver’s
weight.
LPG Forklift Trucks
R 70–20T
R 70–25T
R 70–30T
Mast.
– Telescopic: the mast suitable for most applications.
chain life.
– HiLo: for high stacking under low ceilings. Utilises the
– Triplex: for applications with low doorways and greater
optimised profiles.
Steering.
Light, fully hydraulic power steering provides great
manoeuvrability and thus a high throughput of goods. A single
hydraulic pump supplies the hoist and steering systems.
Hydraulic oil for the steering is diverted from the general
hydraulic circuit by a priority valve.
Overhead guard.
the R 70 can be adapted to a wide range of applications and
driver requirements. When the roof-cover version overhead
guard is specified, a cab can be fitted with ease.
Safety.
The STILL clear view mast and good all round visibility ensure
the highest possible safety levels.
requirements and regulations. It thus carries the “CE”
symbol.
Quality.
* available with twin pedal control if required
For further information on the R 70 please
visit: www.still.de/R70
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
R 70 20 30 T 11 e 05/05 TD Subject to technical modifications.
Service brake.
Achieve more.
() Twin tyres 23 x 9-10/16 PR
kW
1 / min
cm
l/h
3
bar
l / min
dB (A)
Q
Q
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
capacity in kg
1000
c
500
1,0
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
m1
2500
m2
y
x
5,0
6,0
7,0
8,0
5,0
6,0
7,0
8,0
2500
c = 600 mm
l2
Q
l1
c = 1000 mm
1500
Q
Q
1,0
Width (twin front wheels)
Tilt angle
Rated lift
Height, mast raised
Free lift
Length
Load distance
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
Telescopic
mm
mm
1180
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
1280
h3
h1
h4
h 2 /h 5
l2
x
Ast
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
6
9
4120-5120
2750-3250
4765-5765
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820 2920-4020 4120-5120
mm 1850-2100 2150-2700 2750-3250
mm 3130-3630 3730-4830 4930-5930
mm
160
mm
2687
mm
457
mm
4001
4201
4075
Triple full free lift
1180
1280
1722
6
9
6
12
6
9
2500-3000 3100-4200 4300-5300*
1850-2100 2150-2700 2750-3250
3160-3660 3760-4860 4960-5960
1220-1470 1570-2070 2120-2620
2552
437
3875
4075
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
2390-2890
1850-2100
3200-3700
1070-1320
3430
1850
4255
1070
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
4190-4690
2750-3000
4993-5500
1970-2220
1280
1722
3
8
7630
3250
8455
2470
2712
482
4201
4026
4226
* R70-25 only up to rated lift of 4800 mm
1500
1000
1500
c = 1000 mm
Q
1,0
2000
c = 600 mm
c = 800 mm
Q
c = 1000 mm
Q
1500
c = 600 mm
c = 800 mm
c = 1000 mm
Q
1000
500
c
2,0
3,0
rated lift in m
4,0
2,0
3,0
4,0
rated lift in m
1,0
c
500
6,0
Q
Mast types in use with pneumatic
or superelastic tyres.
c
500
2000
c = 600 mm
1000
1000
Wa
2000 c = 800 mm
2000 c = 800 mm
capacity in kg
77
pin
capacity in kg
77
pin
c
capacity in kg
77
pin
2000
1000
capacity in kg
Stilltronic
230
adjustable
seat
+_ 90 mm
h6
Stilltronic
230
mm
h1
Stilltronic
230
2500
h7
6.0
5.8
5.0
5.0
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
3000
c = 800 mm
1500
h10
6.0
5.5
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
Q
h2
5.8
5.3
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
+_ 80
s
24
24
0.44
0.43
0.6
0.45
16570
11390
22
26
Q
l
e
24
24
0.56
0.58
0.6
0.54
16570
10920
26
28
2000 c = 1000 mm
h5
24
24
0.56
0.58
0.6
0.54
16570
10820
30
32
2500
b11
mm
mm
mm
mm
mm
mm
mm
km / h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
c = 600 mm
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
3000
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 T
gas
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
L/SE
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
980
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 T
gas
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
h4
Q
c
x
y
STILL
R 70-20 T
gas
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
β
h3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-20/ 25 T
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-30 T
Other
E-Motor
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
b1
5,0
6,0
500
c
1,0
2,0
3,0
4,0
rated lift in m
twin tyres
Drive.
The generator coupled to the engine generates current and
feeds the drive motor through an electronic speed and power
regulator.
The drive has the following advantages:
– The truck constantly holds the speed set by the foot pedal
regardless of gradient. This makes for safe driving and
implifies operation.
– The travel speed is controlled independently of the lift
speed. Therefore fast hoisting and slow driving (inching) can
take place at the same time without special equipment.
This is completely free of wear, saves on operating costs
and simplifies operation.
kW
1 / min
cm
l/h
3
bar
l / min
dB (A)
Q
Q
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
capacity in kg
1000
c
500
1,0
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
m1
2500
m2
y
x
5,0
6,0
7,0
8,0
5,0
6,0
7,0
8,0
2500
c = 600 mm
l2
Q
l1
c = 1000 mm
1500
Q
Q
1,0
Tilt angle
Rated lift
Height, mast raised
Free lift
Length
Load distance
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
Telescopic
mm
mm
1180
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
1280
h3
h1
h4
h 2 /h 5
l2
x
Ast
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
6
9
4120-5120
2750-3250
4765-5765
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820 2920-4020 4120-5120
mm 1850-2100 2150-2700 2750-3250
mm 3130-3630 3730-4830 4930-5930
mm
160
mm
2687
mm
457
mm
4001
4201
4075
1180
1280
1722
6
9
6
12
6
9
2500-3000 3100-4200 4300-5300*
1850-2100 2150-2700 2750-3250
3160-3660 3760-4860 4960-5960
1220-1470 1570-2070 2120-2620
2552
437
3875
4075
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
2390-2890
1850-2100
3200-3700
1070-1320
3430
1850
4255
1070
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
4190-4690
2750-3000
4993-5500
1970-2220
1280
1722
3
8
7630
3250
8455
2470
2712
482
4201
4026
4226
1500
1000
1500
c = 1000 mm
Q
1,0
2000
c = 600 mm
c = 800 mm
Q
c = 1000 mm
Q
1500
c = 600 mm
c = 800 mm
c = 1000 mm
Q
1000
500
c
2,0
3,0
rated lift in m
4,0
2,0
3,0
4,0
rated lift in m
1,0
c
500
6,0
Q
c
500
2000
c = 600 mm
1000
1000
Wa
2000 c = 800 mm
2000 c = 800 mm
capacity in kg
77
pin
capacity in kg
77
pin
c
capacity in kg
77
pin
2000
1000
capacity in kg
Stilltronic
230
adjustable
seat
+_ 90 mm
h6
Stilltronic
230
mm
h1
Stilltronic
230
2500
h7
6.0
5.8
5.0
5.0
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
3000
c = 800 mm
1500
h10
6.0
5.5
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
Q
h2
5.8
5.3
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
+_ 80
s
24
24
0.44
0.43
0.6
0.45
16570
11390
22
26
Q
l
e
24
24
0.56
0.58
0.6
0.54
16570
10920
26
28
2000 c = 1000 mm
h5
24
24
0.56
0.58
0.6
0.54
16570
10820
30
32
2500
b11
mm
mm
mm
mm
mm
mm
mm
km / h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
c = 600 mm
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
3000
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 T
gas
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
L/SE
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
980
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 T
gas
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
h4
Q
c
x
y
STILL
R 70-20 T
gas
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
β
h3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-20/ 25 T
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-30 T
Other
E-Motor
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
b1
5,0
6,0
500
c
1,0
2,0
3,0
4,0
rated lift in m
twin tyres
Drive.
regulator.
kW
1 / min
cm
l/h
3
bar
l / min
dB (A)
Q
Q
c = 600 mm
c = 800 mm
c = 1000 mm
1500
Q
capacity in kg
1000
c
500
1,0
2,0
3,0
rated lift in m
4,0
5,0
c
500
1,0
6,0
2,0
3,0
4,0
rated lift in m
5,0
6,0
7,0
8,0
m1
2500
m2
y
x
5,0
6,0
7,0
8,0
5,0
6,0
7,0
8,0
2500
c = 600 mm
l2
Q
l1
c = 1000 mm
1500
Q
Q
1,0
Tilt angle
Rated lift
Height, mast raised
Free lift
Length
Load distance
Rated lift
Height, mast raised
Free lift
Length
Load distance
b1
b1
α|β
Telescopic
mm
mm
1180
1722
6
11
2920-4020
2150-2700
3565-4665
160
2552
437
1280
h3
h1
h4
h 2 /h 5
l2
x
Ast
6
9
mm 2320-2820
mm 1850-2100
mm 2965-3465
mm
mm
mm
mm
3875
6
9
4120-5120
2750-3250
4765-5765
h3
h1
h4
h 2 /h 5
l2
x
Ast
mm 2320-2820 2920-4020 4120-5120
mm 1850-2100 2150-2700 2750-3250
mm 3130-3630 3730-4830 4930-5930
mm
160
mm
2687
mm
457
mm
4001
4201
4075
1180
1280
1722
6
9
6
12
6
9
2500-3000 3100-4200 4300-5300*
1850-2100 2150-2700 2750-3250
3160-3660 3760-4860 4960-5960
1220-1470 1570-2070 2120-2620
2552
437
3875
4075
3580-7780
1850-3250
4225-8455
1220-2620
2577
462
3900
4100
2390-2890
1850-2100
3200-3700
1070-1320
3430
1850
4255
1070
4001
2990-4090
2150-2700
3800-4900
1370-1920
2687
457
capacity in kg
2,0
3,0
rated lift in m
4,0
5,0
4190-4690
2750-3000
4993-5500
1970-2220
1280
1722
3
8
7630
3250
8455
2470
2712
482
4201
4026
4226
1500
1000
1500
c = 1000 mm
Q
1,0
2000
c = 600 mm
c = 800 mm
Q
c = 1000 mm
Q
1500
c = 600 mm
c = 800 mm
c = 1000 mm
Q
1000
500
c
2,0
3,0
rated lift in m
4,0
2,0
3,0
4,0
rated lift in m
1,0
c
500
6,0
Q
c
500
2000
c = 600 mm
1000
1000
Wa
2000 c = 800 mm
2000 c = 800 mm
capacity in kg
77
pin
capacity in kg
77
pin
c
capacity in kg
77
pin
2000
1000
capacity in kg
Stilltronic
230
adjustable
seat
+_ 90 mm
h6
Stilltronic
230
mm
h1
Stilltronic
230
2500
h7
6.0
5.8
5.0
5.0
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
3000
c = 800 mm
1500
h10
6.0
5.5
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
Q
h2
5.8
5.3
5.1
4.8
electr. / hydr.
Volkswagen
ADF
34
2600
4
1800
+_ 80
s
24
24
0.44
0.43
0.6
0.45
16570
11390
22
26
Q
l
e
24
24
0.56
0.58
0.6
0.54
16570
10920
26
28
2000 c = 1000 mm
h5
24
24
0.56
0.58
0.6
0.54
16570
10820
30
32
2500
b11
mm
mm
mm
mm
mm
mm
mm
km / h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
c = 600 mm
fork spacing
adjustable
b3
m1
m2
A st
A st
Wa
b13
3000
b3
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-30 T
gas
rider seated
3000
500
457
1740
4261
6472
789
1814
2447
L/SE
23 x 9-10 (20 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
4130
2230
980
544
3687
2687
1180 (1722)
50
100
1000
ISO III B
1100
130
150
4001
4201
2344
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-25 T
gas
rider seated
2500
500
437
1740
3744
5590
654
1740
2004
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
h4
Q
c
x
y
STILL
R 70-20 T
gas
rider seated
2000
500
437
1740
3331
4805
526
1724
1607
L/SE
23 x 9-10 (16 PR)
23 x 9-10 (16 PR)
2x (4x)
2
945 (1220)
932
6
11
2350
160
3320
3965
2230
1158
544
3552
2552
1180 (1722)
40
100
1000
ISO II B
1040
130
150
3875
4075
2238
β
h3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-20/ 25 T
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-30 T
Other
E-Motor
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
b1
5,0
6,0
500
c
1,0
2,0
3,0
4,0
rated lift in m
twin tyres
Drive.
regulator.
and water.
Electrics.
increased.
matting.
his health by the
weight.
LPG Forklift Trucks
R 70–20T
R 70–25T
R 70–30T
Mast.
chain life.
Steering.
Overhead guard.
Safety.
symbol.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
Service brake.
Achieve more.
and water.
Electrics.
increased.
matting.
his health by the
weight.
LPG Forklift Trucks
R 70–20T
R 70–25T
R 70–30T
Mast.
chain life.
Steering.
Overhead guard.
Safety.
symbol.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
Service brake.
Achieve more.
Drive.
Engine.
Water cooled four cylinder DEUTZ engine features a specially
designed low rotation fuel injection system to give high fuel
economy returns with low exhaust emissions.
As an option, particle filters offering 96% efficiency can be
fitted to prevent the emission of soot particles.
Internal or external regeneration is available, depending on
the application.
Mast.
STILL clear view masts in telescopic, HiLo and triplex designs
are available to suit every application:
– Telescopic: cost-effective design, suitable for most
applications.
– HiLo: for high stacking under low ceilings; uses space
right up to the roof.
stacking heights; uses space right up to the roof.
Nested I-beam mast sections with integral hoist cylinders and
in-line rear mounted lift chains give the slimmest mast
section and thus the best clear visibility. Hydraulic hoses for
attachments are run in the dead visibility area of the mast
sections – with no hose reels – for wear-free operation.
Truck Frame.
The sturdy, torsionally rigid 10 mm thick steel frame is firmly
bolted to the cast counterweight. The frame is fully enclosed
and thus prevents noise being amplified and protects the
drive unit assembly from the ingress of dirt. Additional
bracing is provided by the floor plate.
Diesel Forklift Trucks.
R 70–35
R 70–40
R 70–45
– Foot pedals arranged as they are in a car need no familiarisation (twin pedal control is available as an option).
– Drive, acceleration and braking regulated by just one pedal
means simpler operation and less fatigue for the driver.
– Adjustable seating column and correctly aligned seating
position provide an extremely comfortable working position
for a driver of any physique.
– Inherently superior performance enhances driver enjoyment
– The driver is protected from vibrations, which can be
damaging to health, by:
– resilient drive unit mountings
– spring-mounted isolation from the chassis for the
driver’s compartment
– hydraulically damped seat, adjustable for the driver’s
weight.
– The STILL clear view mast allied to excellent all-round
visibility gives the driver maximum security against the
likelihood of collision with people or objects.
– high levels of stability enable fast and smooth negotiation
of bends.
Steering.
– Light, fully powered hydraulic steering gives exceptional
manoeuvrability for a faster turn round of goods. A single
Hydraulic oil for steering is diverted from the general
Overhead Guard.
– The overhead guard is available in different designs to cater
for a wide variety of operating situations.
Quality.
All STILL forklift trucks comply with the ISO 9001 quality
standard. They are carefully constructed and manufactured,
and all materials used are checked to stringent standards.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
R 70 35 45 07 e 05/05 TD Subject to technical modifications.
regulator. The drive has the following advantages:
– The truck holds the speed set by the foot pedal regardless
of direction of travel and gradient. This makes for safe
driving and simpler operation.
– Because travel and lift speeds are controlled independently,
fast hoisting and slow driving (inching) can be performed
simultaneously without special equipment or undue driver
skill. This operation is wear-free, saves on operating costs
– Wear-free braking down to a standstill is achieved through
the drive, which holds the truck in position when at rest. As
long as the pedal is not depressed, the R 70 will remain
stationary. Even on a slight gradient, holding it with the
brake is not necessary. This simplicity of operation makes it
easier – and safer – for the driver, who can concentrate on
positioning the fork tips and the load.
– Driving characteristics are set by the driver by means of a
dashboard mounted control. Five positions vary the
response from fast to slow – fast acceleration and strong
braking for maximum performance can be switched down
through five settings to gentle acceleration and braking for
handling delicate or sensitive goods. Thus the R 70 is
readily adaptable to all working conditions – a benefit
exclusive to STILL’s unique drive and control system.
– Electric drive gives proven reliability, long component life
and low maintenance costs.
Achieve more.
The models depicted in this brochure may contain special parts
or attachments which are not supplied as standard.
Capacity Chart R 70-35 Telescopic, HiLo, and Triple mast
Q
cm3
l/h
bar
l/min
dB (A)
( ) Twin tyres 7.00-15 / 12 PR
pneumatic 250-15
twin pneumatic 7.00-15
1000
6000
7000
8000
capacity in kg
capacity in kg
c = 1000 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
5000
7000
8000
h6
6000
rated lift in mm
Q
c
h7
h10
h2
m1
m2
Q
y
x
s
l2
4500
Q
load centre (mm)
4000
c = 500 mm
3000
c = 600 mm
4500
4000
l1
pneumatic 250-15
1000
5000
c = 500 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
6000
7000
8000
capacity in kg
2000
load centre (mm)
c = 600 mm
3000
c = 800 mm
capacity in kg
76
pin
c = 800 mm
2000
5000
e
76
pin
m
c = 600 mm
h1
76
pin
3000
c = 800 mm
rated lift in mm
h5
23
23
0,4
0,44
0,56
0,52
22600
14900
22
26
5,7
4,7
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
0m
load centre (mm)
c = 500 mm
h4
23
23
0,48
0,5
0,56
0,52
22600
14900
25
28
5,5
4,5
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
+_ 8
adjustable
seat
+_ 90 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
4000
rated lift in mm
5000
6000
rated lift in mm
7000
8000
Wa
Telescopic
Width (single front wheel)
Load distance
Angle of tilt
Rated lift
Height, mast raised
Free lift
Overall length
Rated lift
Height, mast raised
Free lift
Overall length
b1
b1
x
mm
mm
mm
α|β
h3
h1
h4
h 2 /h 5
l2
Ast
6
8*
mm 3220-3420
mm 2350-2450
mm 4030-4230
mm
mm
mm
h3
h1
h4
h 2 /h 5
l2
Ast
mm 3220-3420 3520-4020 4120-5020 3070-3470 3570-4070
mm 2350-2450 2500-2750 2800-3250 2250-2450 2500-2750
mm 4083-4283 4383-4883 4983-5883 3880-4280 4380-4880
mm
160
1470-1670 1720-1970
mm
3000
3000
mm
4387 / 4587
4387 / 4587
>(°
** with front screen 6° max. backward tilt
** with front screen up to 2550 mm closed height 7° max. backward tilt
1380
1380
1769
1769
510
510
6
8*
3
8*
6
8*
6
8*
3
8*
3520-4020 4120-5020 3170-3570 3670-4170 4270-4770
2500-2750 2800-3250 2250-2450 2500-2750 2800-3050
4330-4830 4930-5830 3980-4380 4480-4980 5080-5580
160
1470-1670 1720-1970 2020-2270
2942
2942
4340 / 4540
4340 / 4540
4170-4470
2800-2950
4980-5280
2020-2170
Triple
1380
1769
537
3
Q
5000
Q
load centre (mm)
8*
4530-7530
2550-3250
5355-8355
1470-2470
2969
4367 / 4567
4380-7380
2250-3250
5205-8205
1470-2470
3027
4414 / 4614
4000
3000
capacity in kg
kW
1/min
23
23
0,48
0,5
0,56
0,52
22600
14900
27
29
5,4
4,4
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
4000
c = 1000 mm
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
b11
b3
m1
m2
A st
A st
Wa
b13
Q
c = 600 mm
l
fork spacing
adjustable
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-45
diesel
rider seated
4500
500
510
1950
6250
9530
1220
2700
2447
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3220
4183
2300
1176
493
4000
3000
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4387
4587
2677
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-40
diesel
rider seated
4000
500
510
1950
5850
8672
1178
2600
2004
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4340
4540
2630
load centre (mm)
c = 500 mm
h3
Q
c
x
y
STILL
R 70-35
diesel
rider seated
3500
500
510
1950
5450
7869
1087
2550
1607
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
100
1000
ISO III B
1310
120
165
4340
4540
2630
b1
b3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-35 / 40
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-45
Other
Engine
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
4000
load centre (mm)
c = 500 mm
c = 500 mm
c = 600 mm
c = 600 mm
c = 800 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
2000
pneumatic 250-15
1000
4500
5000
6000
rated lift in mm
7000
8000
capacity in kg
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
4000
5000
6000
rated lift in mm
7000
8000
Q
cm3
l/h
bar
l/min
dB (A)
( ) Twin tyres 7.00-15 / 12 PR
pneumatic 250-15
1000
6000
7000
8000
capacity in kg
capacity in kg
c = 1000 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
5000
7000
8000
h6
6000
rated lift in mm
Q
c
h7
h10
h2
m1
m2
Q
y
x
s
l2
4500
Q
load centre (mm)
4000
c = 500 mm
3000
c = 600 mm
4500
4000
l1
pneumatic 250-15
1000
5000
c = 500 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
6000
7000
8000
capacity in kg
2000
load centre (mm)
c = 600 mm
3000
c = 800 mm
capacity in kg
76
pin
c = 800 mm
2000
5000
e
76
pin
m
c = 600 mm
h1
76
pin
3000
c = 800 mm
rated lift in mm
h5
23
23
0,4
0,44
0,56
0,52
22600
14900
22
26
5,7
4,7
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
0m
load centre (mm)
c = 500 mm
h4
23
23
0,48
0,5
0,56
0,52
22600
14900
25
28
5,5
4,5
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
+_ 8
adjustable
seat
+_ 90 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
4000
rated lift in mm
5000
6000
rated lift in mm
7000
8000
Wa
Telescopic
Load distance
Angle of tilt
Rated lift
Height, mast raised
Free lift
Overall length
Rated lift
Height, mast raised
Free lift
Overall length
b1
b1
x
mm
mm
mm
α|β
h3
h1
h4
h 2 /h 5
l2
Ast
6
8*
mm 3220-3420
mm 2350-2450
mm 4030-4230
mm
mm
mm
h3
h1
h4
h 2 /h 5
l2
Ast
mm 3220-3420 3520-4020 4120-5020 3070-3470 3570-4070
mm 2350-2450 2500-2750 2800-3250 2250-2450 2500-2750
mm 4083-4283 4383-4883 4983-5883 3880-4280 4380-4880
mm
160
1470-1670 1720-1970
mm
3000
3000
mm
4387 / 4587
4387 / 4587
>(°
1380
1380
1769
1769
510
510
6
8*
3
8*
6
8*
6
8*
3
8*
3520-4020 4120-5020 3170-3570 3670-4170 4270-4770
2500-2750 2800-3250 2250-2450 2500-2750 2800-3050
4330-4830 4930-5830 3980-4380 4480-4980 5080-5580
160
1470-1670 1720-1970 2020-2270
2942
2942
4340 / 4540
4340 / 4540
4170-4470
2800-2950
4980-5280
2020-2170
Triple
1380
1769
537
3
Q
5000
Q
load centre (mm)
8*
4530-7530
2550-3250
5355-8355
1470-2470
2969
4367 / 4567
4380-7380
2250-3250
5205-8205
1470-2470
3027
4414 / 4614
4000
3000
capacity in kg
kW
1/min
23
23
0,48
0,5
0,56
0,52
22600
14900
27
29
5,4
4,4
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
4000
c = 1000 mm
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
b11
b3
m1
m2
A st
A st
Wa
b13
Q
c = 600 mm
l
fork spacing
adjustable
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-45
diesel
rider seated
4500
500
510
1950
6250
9530
1220
2700
2447
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3220
4183
2300
1176
493
4000
3000
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4387
4587
2677
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-40
diesel
rider seated
4000
500
510
1950
5850
8672
1178
2600
2004
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4340
4540
2630
load centre (mm)
c = 500 mm
h3
Q
c
x
y
STILL
R 70-35
diesel
rider seated
3500
500
510
1950
5450
7869
1087
2550
1607
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
100
1000
ISO III B
1310
120
165
4340
4540
2630
b1
b3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-35 / 40
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-45
Other
Engine
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
4000
load centre (mm)
c = 500 mm
c = 500 mm
c = 600 mm
c = 600 mm
c = 800 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
2000
pneumatic 250-15
1000
4500
5000
6000
rated lift in mm
7000
8000
capacity in kg
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
4000
5000
6000
rated lift in mm
7000
8000
Q
cm3
l/h
bar
l/min
dB (A)
( ) Twin tyres 7.00-15 / 12 PR
pneumatic 250-15
1000
6000
7000
8000
capacity in kg
capacity in kg
c = 1000 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
5000
7000
8000
h6
6000
rated lift in mm
Q
c
h7
h10
h2
m1
m2
Q
y
x
s
l2
4500
Q
load centre (mm)
4000
c = 500 mm
3000
c = 600 mm
4500
4000
l1
pneumatic 250-15
1000
5000
c = 500 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
6000
7000
8000
capacity in kg
2000
load centre (mm)
c = 600 mm
3000
c = 800 mm
capacity in kg
76
pin
c = 800 mm
2000
5000
e
76
pin
m
c = 600 mm
h1
76
pin
3000
c = 800 mm
rated lift in mm
h5
23
23
0,4
0,44
0,56
0,52
22600
14900
22
26
5,7
4,7
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
0m
load centre (mm)
c = 500 mm
h4
23
23
0,48
0,5
0,56
0,52
22600
14900
25
28
5,5
4,5
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
+_ 8
adjustable
seat
+_ 90 mm
2000
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
1000
4000
rated lift in mm
5000
6000
rated lift in mm
7000
8000
Wa
Telescopic
Load distance
Angle of tilt
Rated lift
Height, mast raised
Free lift
Overall length
Rated lift
Height, mast raised
Free lift
Overall length
b1
b1
x
mm
mm
mm
α|β
h3
h1
h4
h 2 /h 5
l2
Ast
6
8*
mm 3220-3420
mm 2350-2450
mm 4030-4230
mm
mm
mm
h3
h1
h4
h 2 /h 5
l2
Ast
mm 3220-3420 3520-4020 4120-5020 3070-3470 3570-4070
mm 2350-2450 2500-2750 2800-3250 2250-2450 2500-2750
mm 4083-4283 4383-4883 4983-5883 3880-4280 4380-4880
mm
160
1470-1670 1720-1970
mm
3000
3000
mm
4387 / 4587
4387 / 4587
>(°
1380
1380
1769
1769
510
510
6
8*
3
8*
6
8*
6
8*
3
8*
3520-4020 4120-5020 3170-3570 3670-4170 4270-4770
2500-2750 2800-3250 2250-2450 2500-2750 2800-3050
4330-4830 4930-5830 3980-4380 4480-4980 5080-5580
160
1470-1670 1720-1970 2020-2270
2942
2942
4340 / 4540
4340 / 4540
4170-4470
2800-2950
4980-5280
2020-2170
Triple
1380
1769
537
3
Q
5000
Q
load centre (mm)
8*
4530-7530
2550-3250
5355-8355
1470-2470
2969
4367 / 4567
4380-7380
2250-3250
5205-8205
1470-2470
3027
4414 / 4614
4000
3000
capacity in kg
kW
1/min
23
23
0,48
0,5
0,56
0,52
22600
14900
27
29
5,4
4,4
electr. / hydr.
KHD
BF 4 M 1012 E
53
2200
4
3190
3,9
Dieseltronic
230
4000
c = 1000 mm
b11
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
3000
b11
b3
m1
m2
A st
A st
Wa
b13
Q
c = 600 mm
l
fork spacing
adjustable
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
mm
mm
degrees
degrees
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
STILL
R 70-45
diesel
rider seated
4500
500
510
1950
6250
9530
1220
2700
2447
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3220
4183
2300
1176
493
4000
3000
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4387
4587
2677
b10
b10
b11
kg
mm
mm
mm
kg
kg
kg
kg
kg
STILL
R 70-40
diesel
rider seated
4000
500
510
1950
5850
8672
1178
2600
2004
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
120
1000
ISO III B
1310
120
165
4340
4540
2630
load centre (mm)
c = 500 mm
h3
Q
c
x
y
STILL
R 70-35
diesel
rider seated
3500
500
510
1950
5450
7869
1087
2550
1607
L / SE
250-15 / 18 PR
250-15 / 18 PR
2x (4x)
2
1150 (1336)
1120
6
8
2400
160
3320
4130
2300
1176
493
3942
2942
1380 (1769)
50
100
1000
ISO III B
1310
120
165
4340
4540
2630
b1
b3
Manufacturer
Load centre
Load distance
Wheelbase
Weight
Tyre size – front
Tyre size – rear
Closed height
Free lift
Lift height
Height, mast raised
Seat height
Coupling height
Overall length
Overall width
Fork thickness
Fork width
Fork length
Fork carriage width
Speed laden
Speed unladen
Lift speed laden
Lift speed unladen
Gradeability laden
Brakes
Engine manufacturer
Type
Rated rpm
No. of cylinders
Displacement
Fuel consumption
Drive control
R 70-35 / 40
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
R 70-45
Other
Engine
Performance
Dimensions
Wheels | tyres
Weight
Characteristics
α
4000
load centre (mm)
c = 500 mm
c = 500 mm
c = 600 mm
c = 600 mm
c = 800 mm
c = 800 mm
c = 1000 mm
c = 1000 mm
2000
pneumatic 250-15
1000
4500
5000
6000
rated lift in mm
7000
8000
capacity in kg
SE 250-15
SE 28 x 12,5-15
SE twin 7.00-15
4000
5000
6000
rated lift in mm
7000
8000
Drive.
Engine.
the application.
Mast.
applications.
Truck Frame.
R 70–35
R 70–40
R 70–45
weight.
of bends.
Steering.
Overhead Guard.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
Achieve more.
Drive.
Engine.
the application.
Mast.
applications.
Truck Frame.
R 70–35
R 70–40
R 70–45
weight.
of bends.
Steering.
Overhead Guard.
Quality.
STILL GmbH
Berzeliusstrasse 10
D-22113 Hamburg
Telephone: +49 (0)40 / 73 39-0
Telefax:
+49 (0)40 / 73 39-16 22
[email protected]
www.still.de
Achieve more.
Achieve more.
Diesel forklift trucks
R 70-60
R 70-70
R 70-80
Achieve more.
R 70 Technical data.
Miscellaneous
Engines
Performance
Basic dimensions
Wheels / chassis
Weights
Characteristics
1.1
1.2
1.3
1.4
1.5
1.6
1.8
1.9
2.1
2.2
2.2.1
2.3
2.3.1
3.1
3.2
3.3
3.5
3.5.1
3.6
3.7
4.1
4.1.1
4.2
4.3
4.4
4.5
4.7
4.8
4.12
4.19
4.20
4.21
4.22
4.22.1
4.22.2
4.23
4.24
4.31
4.32
4.33
4.34
4.35
4.36
5.1
5.1.1
5.2
5.2.1
5.3
5.3.1
5.5
5.5.1
5.7
5.7.1
5.9
5.9.1
5.10
7.1
7.1.1
7.2
7.3
7.4
7.4.1
7.5
8.1
8.2
8.3
8.4
8.5
Manufacturer
Drive (electric, diesel. petrol LPG, mains)
Controls (stand on, Seated, etc.)
Capacity / load
Load centre
Load distance
Wheelbase
Truck weight
Axle load laden, front
Axle load laden, rear
Axle load unladen, front
Axle load unladen, rear
Tyres (rubber, SE pneu., polyurethane)
Tyre size, front
Tyre size, rear
Number of wheels, front (x=drive)
Number of wheels, rear (x=drive)
Track width, front
Track width, rear
Tilt mast / fork carriage, forwards
Tilt mast / fork carriage, backwards
Free lift
Lift
Height, mast raised
Height over overhead guard (cab)
Seat height / Standing height
Coupling height
Overall length
Länge einschl. Gabelrücken
Length including fork backs
Fork thickness
Fork width
Fork length
Fork carriage DIN 15173 Class / Form A.B
Fork carriage width
Floor clearance under mast, laden
Floor clearance, centre of wheel-base
Working aisle width with 1000 x 1200 pallet crossways
Working aisle width with 800 x 1200 pallet crossways
Turning radius
Smallest pivot point distance
Travel speed laden
Travel speed unladen
Hoist speed laden
Hoist speed unladen
Drawbar pull laden
Drawbar pull unladen
Gradeability laden
Service brake
Engine manufacturer
Model
Engine rating to ISO 1585
Rated speed
Number of cylinders
Cubic capacity
Fuel consumption to VDI cycle
Drive control
Working pressure for attachments
Sound level at driver’s ear
Towing coupler, Type / Model DIN
Q
c
x
y
kg
mm
mm
mm
kg
kg
kg
kg
kg
b10
b11
mm
mm
Grad
Grad
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
mm
h1
h2
h3
h4
h6
h7
h 10
l1
l2
b1
s
e
l
b3
m1
m2
A st
A st
Wa
b13
mm
mm
mm
mm
mm
mm
mm
km/ h
km/ h
m/ s
m/ s
m/ s
m/ s
N
N
%
%
s
s
STILL
R 70-60
Diesel
Rider seated
6000
600
578
2250
8824
13417
1407
4283
4541
L/SE
300-15 / 22 PR
8.25-15 / 18 PR
2x
2
1524
1584
6
11
2730
150
3500
4440
2514
1443
549
4484
3448
1853
70
150
1000
ISO IV A
1800
STILL
R 70-70
Diesel
Rider seated
7000
600
588
2250
10560
15150
2410
4450
6110
L/SE
355 / 65-15 / 24 PR
8.25-15 / 18 PR
2x
2
1524
1584
6
11
2730
150
3100
4240
2514
1443
563
4593
3593
1874
70
150
1000
ISO IV A
1800
STILL
R 70-80
Diesel
Rider seated
8000
600
588
2250
10667
16752
1915
4500
6167
L/SE
8.25-15 / 18 PR
8.25-15 / 18 PR
4x
2
1708
1584
6
11
2730
150
3100
4240
2514
1443
563
4593
3593
2222
70
150
1000
ISO IV A
1800
250
4896
4696
3118
250
5018
4818
3230
250
5018
5218
3230
25
25
25
25
25
25
0.50
0.40
0.40
0.50
0.40
0.40
0.50
0.50
0.50
0.40
0.40
0.50
45230
45230
45230
31600
31600
31600
31
24
24
32.5
27.5
27.5
5.2
5.7
5.7
4.2
4.7
4.7
Electrical / hydraulic. Electrical / hydraulic. Electrical / hydraulic.
Deutz
Deutz
Deutz
BF 04 M 2012 C
BF 04 M 2012 C
BF 04 M 2012 C
kW
74.9
74.9
74.9
1/min
2500
2500
2500
4
4
4
cm3
4038
4038
4038
l/h
Stilltronic
Stilltronic
Stilltronic
bar
230
230
230
l / min
dB(A)
76.6
76.6
76.6
Pin
Pin
Pin
Dimensions in mm
Seat adjustable ± 90
Forks
adjustable
R 70 - 60 / 70 - 70 (Single tyres)
Forks
adjustable
R 70 - 80 (Twin tyres)
The trucks shown in this brochure may include special equipment which is not included in the standard delivery specification.
Capacities R 70 - 60
6000
Explanations
To line 5.9 Acceleration time:
Time for travel accelerating from rest, on a dry,
level roadway 15 m long.
Load centre c = 600 mm
To line 8.4 Sound level:
Mean value at the driver’s ear (Lm = average level) to DIN EN 12053
Part 36 with cab.
c = 800 mm
5000 c = 900 mm
Q
c = 1000 mm
4000
Q
Capacity in kg
3000
2000
c
1000
1.0
2.0
3.0
4.0
5.0
6.0
7.0
5.0
6.0
7.0
5.0
6.0
7.0
Rated lift in mm
7000
c = 800 mm
6000
c = 1000 mm
5000 c = 1200 mm
Q
4000
Q
Capacity in kg
3000
2000
c
1000
1.0
2.0
3.0
4.0
Rated lift in mm
8000
c = 800 mm
7000 c = 900 mm
c = 1000 mm
6000
Q
5000
Q
Capacity in kg
4000
3000
c
2000
1.0
2.0
3.0
4.0
Rated lift in mm
R 70 Technical data.
Drive.
The generator coupled to the engine generates current and feeds
the electric drive motor through an electronic speed and power
regulator.
– The truck constantly holds the travel speed set by the foot pedal.
It makes no difference whether it’s going up hill or down, for safer
driving and simplified operation.
– The travel speed is controlled independently of the lift speed.
Therefore fast hoisting and slow driving (inching) can take place
at the same time without special equipment or undue driver skill.
This is completely free of wear, saves on operating costs and
– The driver can adjust the driving characteristics to changing load
or application conditions or to suit safety requirements at any
time, e.g. for the transport of pallets of drinks. This gives a higher
turnover of goods with greater safety.
– High reliability, long life and low maintenance costs.
Engine.
– The driver is protected from vibrations which could damage his
health, by:
– resiliently mounted drive unit,
– rubber mounting for driver’s compartment ,
– hydraulically damped seat, adjustable to the driver’s weight.
– Foot pedals arranged as they are in a car*. No driver learning
curve.
– Wear free braking is achieved through the drive system: both
to a standstill and then holding the truck in position. Even on a
gradient, the R 70 will remain stationary until the drive pedal is
depressed – holding it with the brake pedal is not necessary.
This simplified operation takes the pressure off the driver when
positioning the forks or the load.
Mast.
STILL clear view masts of Telescopic and Triplex design:
in-line rear mounted lift chains give the slimmest possible mast
section for the clearest visibility. Other designs on request.
Turbocharged, water cooled, four cylinder DEUTZ engine. With a
special injection process for improved fuel consumption and lower
exhaust contaminants.
Optional particulate filters prevent the emission of nearly all soot
particles. A choice of internal and external regeneration is available
depending on the truck application.
Steering.
Electrics.
Overhead guard.
The modern electrical system works digitally. The exchange of
information between electrical assemblies e.g. between the drive
controller and the cockpit is achieved using the CAN bus system
already used successfully in road vehicles. The number of cables
and plug connectors is reduced and the reliability increased. In
addition to this it is easy to implement variants to the electrical
equipment.
The overhead guard is available in different designs so that the R
70 can be adapted to a wide range of individual applications and
driver requirements. Retro-fitting a cab to the R 70 can be done
with ease.
Constant research and development have benefited the driver’s
compartment in the R 70:
– Low, wide step for greater safety on entry and exit.
– The cockpit has an LCD display and a pre-selection facility for
the drive characteristics by the driver. He can select the best
acceleration or braking and travel speeds for himself from 5 preset options. Other adjustments to the drive parameters to suit the
application conditions and the turnover of goods can be made by
simple changes to the software.
– The modern driving characteristics of the R 70 allow the truck to
be held on a gradient or uneven roadway without touching the
hand or foot brakes.
matting.
– Operation made simpler and easier for the driver because he can
drive and brake using just the drive pedal.
– Adjustable steering column and longitudinal and rake adjustment
of the seat provide an extremely comfortable working position for
any physique.
Light, fully hydraulic servo-steering provides great manoeuvrability
and thus a high throughput of goods. A single hydraulic pump
supplies the hoist and steering systems. Hydraulic oil for the
steering is diverted from the general hydraulic circuit by a priority
valve. This reduces fuel consumption.
Safety.
The R 70 complies with all applicable EC safety standards and
carries the CE symbol.
*available with dual pedal control if required.
STILL GmbH
Berzeliusstraße 10
D-22113 Hamburg
Telephone: +49 (0)40/73 39-0
Telefax: +49 (0)40/73 39-16 22
[email protected]
www.still.de
Achieve more.
R 70/60/80 12 e 05/05 TD Subject to technical changes.

R 70 Technical Data.

Transcription

Similar documents

Weststail 32 for Sale

CCTV MasTs

CX Technical data.

A Pictorial Demonstration of the Development of a Sailing Inflatable

Hse ShopLocal FP 1122.indd

Activation Castle of Reichenstein DL-02342 BOB-008 in DLFF

Car-Lifts - NANI – Verladetechnik

smart move l14 – 20 the fully automated transport robots

accessories uk