TSP Product Catalogue

June 2009
INDEX
This Catalogue represents only the more common items used in the NZ Fire Market. Tyco Safety Products through its
global network and agencies have a wide range of products available.
We can not list all products in our catalogue, if you require further assistance or if you can not find what you are
looking for please contact Tyco Safety Products Customer Services on (09) 826 1716 and our friendly staff will direct
you on to the appropriate Product Manager.
Air Bags
Section 1.0
Adaptors and Hose Couplings
Section 2.0
Blank Plug and Caps
Section 3.0
Breathing Apparatus
Section 4.0
Escape Ladders
Section 5.0
Explorer Cases
Section 5.1
Fire Extinguishers
Section 6.0
Forestry Fire Fittings
Forestry Couplings
Forestry Dividing Breaching
Power Jet Nozzle
ND265
ND11
Section 7.0
Forestry Fire Accessories
Washers and Spanners
Forestry Adaptors
Hose packs
Flexi Pack
Wildfire Drip Torch
Fire Hose Washer
Hydroblender
Kestrel 3000 Digital Weather Instrument
Wildfire V Shaped Hose Strangler
Red Brute-X-Pander Hose Expansion Unit
Expansion Unit
Section 7.1
Forestry Hand Tools
Section 8.0
Flexidam
Section 9.0
Foam Products
Section 10.0
Petrol Generators
Section 11.0
Hose
Section 12.0
Viking Layflat Fire Hose
Premier Extra Lay Flat Hose
Snap-Tite Dura Light LD Hose
Municipal Hose
Section 12.1
Section 12.2
Rubber Hose Ramp
Section 12.3
Hose Reels
Section 13.0
Lightman Helipad Kit
Section 13.1
Monitors
Section 14.0
Nozzles
Section 15.0
Nozzle Spray Jet
Nozzles Hose Reel
Landing Valves
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
June 2009
INDEX
TFT Nozzles
Section 15.1
TFT Flow Meter
Section 15.2
Portable Fire Pumps - Fireflow
Section 16.0
Defender Series Pumps
Section 16.1
BB4 Portable Fire Pump
Section 16.2
Mark 3- E Portable Fire Pump
Section 16.3
Portable Fire Pump Accessories
Section 16.4
Centrifugal Pump
Section 16.5
Positive Pressure Ventilation Fans
Section 17.0
Salvage Sheet
Section 18.0
Smoke Generator
Section 19.0
Personal Protective Clothing and Fire Suits
Section 20.0
Personal Protective Equipment
Section 20.1
Personal Protective Equipment – Fire Fighting Boots
Section 20.2
Rural Fire Goggles
Section 20.3
Rescue Tools
Hose Hook
Res-Q-Me Tool
Firemans Axe
Axe Aircraft
Hooligan Tool
Basket Stretcher
Section 21.0
Spill-X – Ansul Spill Control Products
Section 22.0
Spill Containment Kits
Section 22.1
Standpipes
Standpipe Contractors
Standpipe Brigade Double Head Controlled
Standpipe Brigade Single Head Swivel
Hydrant Key & Bar
Section 23.0
Suction Couplings and Accessories
Coupling Sets
Coupling Female
Coupling Male
Coupling Washers
Suction Adaptors
Blank Cap
Strainers
Section 23.1
Suction Hose
Section 24.0
Torches
Section 25.0
Thermal Imaging Cameras
Section 26.0
Waterway Equipment
Section 27.0
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
June 2009
AIR BAGS – HIGH PRESSURE 8.0 BAR
Sava high-pressure air bags are Kevlar cord
reinforced.
The patented construction
utilizes a state-of-the-art design and
guarantees an excellent operation and high
lifetime. Metal parts are solid brass.
The bags are thin, light and simple for use.
A special dimpled surface assures a good
gripping even when two bags are stacked
on top of each other. There are fifteen
sizes of air bags available both square and
rectangular shape with a lifting capacity
between one and 64 tons. The application
range of Sava standard air bags is further
expanded by the industrial air bags and
custom-made bags for special applications,
respectively.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 1.0
June 2009
AIR BAGS – FLAT 8.0 BAR
Flat Bags are perfected Standard airbags. Due to the construction the entire bag surface lifts
evenly providing a constant lifting force independent of the lifting height.
The leveled bag surface provides a larger contact surface and an improved safety during use,
especially when two or even three bags are placed on top of each other
These bags are made from an excellent wear resistant rubber compound and are Kevlar cord
reinforced.
For further information on Air Bags please contact your Tyco Safety Products Sales
Representative.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 1.0.1
June 2009
ADAPTORS
Female Double Lug
Description
Adaptor Female
Adaptor Female
Adaptor Female
Adaptor Female
Adaptor Female
(taper thread)
IN
IN
IN
IN
IN
70mm
70mm
70mm
70mm
70mm
x
x
x
x
x
2” FBSP LA
2” MBSP LA
2½” FBSP LA
2½” MBSP LA
2½” MBSPT LA
Part No.
Indent POA
Indent POA
24367
Indent POA
24895
Female Single Lug
Description
Adaptor Female
Lug LA
Adaptor Female
Lug LA
Adaptor Female
Single lug LA
Adaptor Female
Single lug LA
Adaptor Female
Single lug LA
Adaptor Female
Single lug LA
IN 70mm x 2½” FBSP Single
Part No.
24367S
IN 70mm x 2½” MBSP Single
Indent POA
IN 70mm x 50mm FBSP
24366
IN 70mm x 50mm MBSP
24350
IN 70mm x 75mm FBSP
24368
IN 70mm x 38mm MBSP
24348
Female Single Lever
Description
Adaptor Female IN 70mm
Lever LA
Adaptor Female IN 70mm
Lever LA (Taper Thread)
Adaptor Female IN 70mm
Lever Bronze
Adaptor Female IN 70mm
Lever Bronze
x 2½” FBSP Single
Part No.
24897
x 2½” MBSP Single
24892S
x 2½” FBSP Single
Indent POA
x 2½” MBSP Single
Indent POA
Adaptors Male Instantaneous
Male Adaptor with FBSP Thread
Male Adaptor with MBSP Thread
Description
Adaptor LA 70mm MI x 70MM MI
Adaptor Male IN 70mm x 1½” MBSP LA
Adaptor Male IN 70mm x 1½” FBSP LA
Adaptor Male IN 70mm x 2” FBSP LA
Adaptor Male IN 70mm x 2” MBSP LA
Adaptor Male IN 70mm x 2½” FBSP LA
Adaptor Male IN 70mm x 2½” MBSP LA
Adaptor Male IN 70mm x 3” FBSP LA
Adaptor Male IN 70mm x 3” MBSP LA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 2.0
Part No.
24120
24123
24122
24890
24126
24167
24894
24168
24169
June 2009
HOSE COUPLINGS INSTANTANEOUS
Sets (1 x Female, 1 x Male) – NZS/PAS4505:2007
Description
Part No.
Coupling Set IN 70 x 38mm Tail LA
25303
Coupling Set IN 70 x 38mm Tail Bronze
Indent POA
Coupling Set IN 70 x 45mm Tail LA
25305
Coupling Set IN 70 x 45mm Tail Bronze
25312
Coupling Set IN 70 x 50mm Tail LA
25306
Coupling Set IN 70 x 50mm Tail Bronze
Indent POA
Coupling Set IN 70 x 64mm Tail LA
25307
Coupling Set IN 70 x 70mm Tail LA
25308
Coupling Set IN 70 x 70mm Tail Bronze
25301
Coupling Set IN 70 x 90mm Tail LA
25311
Female Half Only– NZS/PAS4505:2007
Description
Female IN 70 x 38mm Tail LA
Female IN 70 x 38mm Tail Bronze
Female IN 70 x 45mm Tail LA
Female IN 70 x 45mm Tail Bronze
Female IN 70 x 50mm Tail LA
Female IN 70 x 50mm Tail Bronze
Female IN 70 x 64mm Tail LA
Female IN 70 x 70mm Tail LA
Female IN 70 x 70mm Tail Bronze
Female IN 70 x 90mm Tail LA
Part No.
25303F
Indent POA
25305F
Indent POA
25306F
Indent POA
25307F
25308F
Indent POA
25311F
Male Half Only– NZS/PAS4505:2007
Description
Male IN 70 x 38mm Tail LA
Male IN 70 x 38mm Tail Bronze
Male IN 70 x 45mm Tail LA
Male IN 70 x 45mm Tail Bronze
Male IN 70 x 50mm Tail LA
Male IN 70 x 50mm Tail Bronze
Male IN 70 x 64mm Tail LA
Male IN 70 x 70mm Tail LA
Male IN 70 x 70mm Tail Bronze
Male IN 70 x 90mm Tail LA
Part No.
25303M
Indent POA
25305M
Indent POA
25306M
Indent POA
25307M
25308M
Indent POA
25311M
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 2.1
June 2009
HOSE COUPLINGS INSTANTANEOUS
Coupling Sets - BS336 (Marine Use)
Description
Coupling Set
Coupling Set
Coupling Set
Coupling Set
Coupling Set
IN
IN
IN
IN
IN
64
64
64
64
64
x
x
x
x
x
38mm
45mm
50mm
64mm
70mm
Bronze
Bronze
Bronze
Bronze
Bronze
Part No.
25656
25657
25658
25659
25670
Female Half Only – BS336
Description
Coupling IN
Coupling IN
Coupling IN
Coupling IN
Coupling IN
64
64
64
64
64
x
x
x
x
x
38mm
45mm
50mm
64mm
70mm
Bronze
Bronze
Bronze
Bronze
Bronze
Part No.
25656F
25657F
25658F
25659F
25670F
Male Half Only – BS336
Description
Coupling IN
Coupling IN
Coupling IN
Coupling IN
Coupling IN
64
64
64
64
64
x
x
x
x
x
38mm
45mm
50mm
64mm
70mm
Bronze
Bronze
Bronze
Bronze
Bronze
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 2.1.1
Part No.
25656M
25657M
25658M
25659M
25670M
June 2009
BLANK PLUG AND CAPS
Blank Caps Instantaneous – NZS/PAS
4505:2007
Description
Blank Cap Male Instantaneous 70mm
Pressure Release LA
Blank Cap Male Instantaneous 70mm
Pressure Release Bronze
Blank Cap Female Instantaneous 70mm
Pressure Release LA
Blank Cap Male Instantaneous 70mm –
Plain LA
Blank Cap Instantaneous – BS336
Description
Blank Cap Male Instantaneous 64mm –
Plain Bronze
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 3.0
Part No.
25020
25038
25022
78293
Part No.
RB25047
June 2009
BREATHING APPARTUS
ELSA
Sabre have been manufacturing breathing apparatus for over
25 years – one of their original concepts being the ELSA
constant flow escape breathing apparatus. The new ELSA is
the third generation version of this popular product, originally
designed in 1982. This latest version reflects the original
concept due to its simplicity and robustness combined with
performance to the latest Eurpean Standard EN1146. The
ELSA reflects Sabre‟s stated philosophy of producing products
which customers wear by choice, no just necessity.
SIGMA 2
Sabre Have over 25 years‟ experience in the design and
manufacture of breathing apparatus.
The new Sigma 2 is
designed to offer the highest level of breathing apparatus
performance in a simple, easy to use package to meet the needs
of industry and marine markets who require a combination of
maximum performance and true operational simplicity.
The Sigma 2 provides optimum levels of reliability and low
ownership costs in a self contained breathing apparatus that fully
reflects Sabre‟s stated philosophy: to produce equipment that our
customers will wear by choice, not just by necessity.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 4.0
June 2009
BREATHING APPARTUS
SABRE PRO PAK
Professional Firefighting SCBA
The Sabre Propak is the latest lightweight self
contained breathing apparatus from Scott Health
& Safety.
Offering the highest levels of
protection, Propak builds upon the proven
performance of the Sabre Contour and
represents the next generation in SCBA
Setting the standard:
Approved to prEN137: 2002 class II,
incorporating the stringent flame engulfment
test, ProPak is refined to a level of performance
demanded by the professional fire fighter.
PRO-CAB Emergency Air System
The personal protection of Wildfire and Bush Fire
Brigade crews has always been of the utmost
importance. And being caught in a vehicle burnover has always been a major concern for fire
fighters across the globe.
The new Scott Pro-Cab Emergency Air System is
specifically designed to provide personal
respiratory and flame protection to combat these
hazardous conditions.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 4.0.1
June 2009
ESCAPE LADDER







Worry-Free Escape - Strong and Durable construction
Easy to Use - Attaches Quickly to Most Common Windows
Tangle-Free Design - Fast and Easy to Deploy
Ready for Use - No Tools or Assembly Required
Ladder Tested to 1000 lbs
Anti-Slip Rungs
2 Different Sizes - 2 Storey Escape Ladder – 13ft, Weight 7.75 lbs
3 Storey Escape Ladder – 25ft, Weight 16.25 lbs
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 5.0
June 2009
EXPLORER CASES
Tyco Safety Products offer a wide range of
Explorer Cases.
For more information please contact your
nearest Sales Representative
.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 5.1
June 2009
Co2 FIRE EXTINGUISHERS
Exelgard offers a range of Carbon Dioxide-type extinguishers designed to effectively fight fires involving
electrical equipment, ranging in capacity from 2 kg, 3.5 kg and 5kg. Carbon Dioxide extinguishers may
also be used on small Class B fires involving flammable and combustible liquids
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 6.0
June 2009
POWDER FIRE EXTINGUISHERS
Powder type fire extinguishers are the most widely used type of extinguisher. Depending on the powder
type (i.e. ABE or BE), these extinguishers are effective against the following types of fires:
Class A – paper, textiles, wood, most plastics and rubber
Class B – petrol, oil and paints
Class C – LPG, CNG and Acetylene
Class E, electrically energized equipment
Powder extinguishers are available in a range of sizes, from a compact 0.9 kg domestic model to a 9kg
model suitable for industrial applications.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 6.0.1
June 2009
WATER AND FOAM FIRE EXTINGUISHERS
Foam fire extinguisher, marked with a blue band work by covering a burning flammable liquid with a blanket
of foam, cutting off the fire‟s air supply and preventing the release of flammable vapours.
Foam extinguishers are suitable for the following types of fires:
> Class A – Paper, textiles, wood, most plastics and rubber
> Class B – Petrol, oil and paints.
Water fire extinguishers discharge a stream of water onto the fire, lowering the temperature of the burning
material to below ignition point. Water extinguishers do not have a coloured band.
Water extinguishers are suitable for the following types of fires:
> Class A – Paper, textiles, wood, most plastics and rubber
Wet chemical extinguishers, marked by an oatmeal band, employ an agent that reacts with burning cooking
oil or fat to form a suds-like blanket across the fuel surface, cutting off the fire‟s air supply and preventing the
release of flammable vapours.
Wet Chemical extinguishers are suitable for the following types of fires:
> Class A – Paper, textiles, wood, most plastics and rubber
> Class F – Cooking oils or fats
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 6.0.2
June 2009
FORESTRY FIRE FITTINGS
Forestry Couplings
Description
Part No.
Coupling Set LA 25mm Forestry
25781
Coupling Half LA Female 25mm
25768
Coupling Half LA Male 25mm
Indent POA
Coupling Set LA 41mm Forestry
25765
Coupling Set LA 41mm Extruded Hose
25765EX
Coupling Half LA Female 41mm
25765F
Coupling Half LA Male 41mm
25765M
Copper Ferrule 25mm
25782
Copper Ferrule 41mm
25766
Forestry Dividing Breaching
Description
Part No.
TFT LA 41mm Forestry controlled
Dividing Breaching. Pressure tested to
1000PSI (70BAR) lightweight and
compact.
26164 (Bare)
Also available is the uncontrolled
Dividing Breaching ND48
26164TP (C/W
thread
protectors)
GO272
Power Jet Nozzle
Description
Part No.
Power Jet Nozzle 25mm
26185
Power Jet Nozzle 41mm
26183
ND265
Description
Part No.
LA 41mm Double Female Connector
ND265
25076
ND11
Description
Part No.
LA 41mm Thread protector ND11
25077
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 7.0
June 2009
FORESTRY FIRE ACCESSORIES
Washers & Spanners
Tyco Safety Products have a wide range of Washers available
Suction, Camlock
Description
Barway Coupling Washer
Part No
RC34450
Barway Spanners
G8034
Pressure Washer Instantaneous 70mm
25315
Pressure Washer Instantaneous 64mm
25316
Standpipe Base Washer
26198
Forestry Coupling Washer 41mm ND15
25767
Forestry Adaptor
Description
Part No.
Adaptor 41mm x 25mm LA ND40
25078
Blank Cap LA 41mm Female ND49
25073
Blank Cap LA 41mm Male ND91
25072
Adaptor 41mm x 19mm LA
25079
Hose Pack
Tyco Safety Products supply a wide range of Hose packs
manufactured to DOC specifications. All retaining straps are
leather with metal buckles.
Description
Part No.
Blue Hose Pack
22957
Red Hose Pack
22956
Green Hose Pack
22958
Grey Hose Pack
22959
KESTREL 3000 Digital Weather Instruments
The Kestrel 3000 measures the environmental conditions
quickly and accurately. Conditions measured include: Wind
speed, temperature, wind chill, relative humidity, dewpoint,
heat stress index.
Features: Real-Time Clock, Protective cover with sure-grip
over molding, data hold function, Large easy to read display
with backlight, Waterproof floats, Lanyard and battery
included.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 7.1
June 2009
FORESTRY FIRE ACCESSORIES
FLEXI PACK
Tyco Safety Products offer this unique 19L Flexi-pack c/w hand pump and hose. The Flexi-pack
holds 19L of water or Foam, molds to the wearers back for comfort.
Parts Description
1.
FlexPak Bag
2.
Yellow 4” Cap assembly complete
3.
FlexPak hose c/w shut-off valve
4.
Water Nozzle
5.
FlexPak Pump (water) with adaptor & nozzle
6.
Foam Nozzle
7.
FlexPak pump (foam) with adaptor & nozzle
8.
Shut-off Valve
9.
Adaptor
Description
Part No
FlexPak 19L Water Sprayer
FFP001
FlexPak 19L Foam Sprayer
FFP002
FlexPak Hose Complete
FFP010D
FlexPak Pump Repair Kit
FFP049
FlexPak Pump Only Water
FFP050
FlexPak 19L Bag/Harness
FFP100
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 7.1.1
June 2009
FORESTRY FIRE ACCESSORIES
Wild Fire Drip Torch
Made of lightweight aluminum alloy and a cast top and base, it is
designed to withstand the rough treatment that drip torches gets.
Powder Painted (Red), the safety loop is well away from the flame so
there is no danger of the fuel in the loop (liquid seal) vaporizing from
heat. The 318 screw type vent valve introduces air to the bottom of
the tank to relieve the vacuum created as fuel is being used. The wick
is made of inserted fiberglass. The “handlifting” handle gives good
balance in ay position. UN approved ,
Meets USDA Spec 5100-614
(4.7L) (2.3kg)
Description
Part No.
Drip Torch
W15001
Fire Hose Washer
Remarkably effective in cleaning all types of dirty caked-up fire hose.
No adjustments of flow or pressure required. There is no contact
between hose and washer since hose is supported by powerful water
jets providing pressure is 60 psi (414kPa) or more.
Ideal for Forestry / Wildfire hoses up to 70mm
Description
Part No.
Fire Hose Washer
WAA5825
Hydroblender
The hydroblender is designed to be used in rural firefighting operations by
inserting industrial soap capsules into the cylinder. By applying water
through the hydroblender this improves the wetting action of standard water
and its ability to penetrate dry vegetation.
Because of waters strong surface tension it beads and rolls off most fuels, by
apply water through the hydroblender, the industrial soap breaks down the
water molecule and allows it to flow and penetrate the fuel surface.
The hydroblender comes with or without a base frame and an optional
backpack/carry pack is available on request
Description
Part No.
Hydroblender Capsule
Hydroblender c/w frame no fittings
Hydroblender c/w frame fittings
Hydroblender Bare no frame or fittings
Wajax / Hydroblender Backpack Carry Frame
32201
32202
32203
7604
G7601
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 7.1.2
June 2009
FORESTRY FIRE ACCESSORIES
Wildfire V Shaped Hose Strangler
Specifically designed for thin walled synthetic hoses, it
has two positions or settings for different hose wall
thickness ¼” or 1/8” (6 or 3mm). Replaceable rubber
shoe prevents damage to hose. Light corrosion resistant
alloy, painted brilliant red. 11 ½” (29cm) long. 1.5lbs
(682g). Can be carried in belt pouch FA-149.
Description
Part No.
Hose Strangler
WAB5420
Red-Brute-X-Pander Hose Expansion Unit
The Brute-X-Pander may be used to attach 1” to 3”
(25mm to 76mm) couplings, and is ideal for in-house use
or mounting in a service van for field repairs. The unit
weighs 32% less than the previous hand pump model,
requires 50% fewer strokes to expand, and 75% fewer
strokes to release.
Due to its all in one design the X-PANDER has fewer parts
and no hydraulic connections making it extremely reliable
and almost service free. All current Red Head Brass
expansion unit assemblies and replacement parts can be
used with the X-Pander.
Description
Part No.
X-Pander 13” W x 17” D x 10” H
(33 x 43 x 25cm) Weight 45lbs (20.5kg)
Indent POA
Expansion Unit
For use with hydraulic hose coupling expander REDBRUTE-X-PANDER. Expansion units consist of hardened
steel segments, segment holder and drawbar.
Redesigned for use with 1” (25mm) to 2 ½” (64mm)
couplings. Easily and quickly attached or changed. Hard
chromed for long life
Description
Part No.
Expansion Unit 25mm
Indent POA
Expansion Unit 41mm
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 7.1.3
June 2009
FORESTRY HAND TOOLS
Pulaski Axe Part No:32016
The Pulaski tool is a combination mattock and axe
designed for fire fighting and clearing work. A rugged
tool for hard work. High grae tempered steel with a 36”
(91cm) handle. Overall weight 5lbs (2.3kg).
Mcleod Fire Tool Part No:32018
The 12-gauge steel hoe blade is very useful in cutting
through deep litter, matted brush and similar fuels; also
for trenching, grubbing or slashing low limbs. Rugged
construction, superior to any commercial hoe or rake on
the market.
9” H x 9½” W x 49” L (23 x 25 x 124cm). Overall weight
5lbs (2.3kg).
All tools available with hard wood handles
Slashers – both hook 32022H
Straight blade 36” 32022
Replacement Handle 32022HNDL
Shovel No. 2 Long Handle 32020
Replacement Handle Shovel Hickory 32020H
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 8.0
June 2009
FLEXIDAM
Material Options
P.V.C Coated Polyester 900 gsm
XR5 1020 gsm
Nylon reinforced Polyurethane 1220 gsm
Applications
Oil Storage / Temporary Buffer Storage
Industrial Waste Containment
Water Storage
VOLUME
Litres
2200
5000
10000
25000
Specifications
Portable
Self Erecting
Stable
Adaptable Connections
Easy to Clean
Low Profile
Durable Construction
Fully Repairable
Extensive Size Range
DIMENSIONS - FILLED
WEIGHT
Gallons
Diameter
Height
Top
1
2
3
1100
2200
5500
2800mm
4000mm
6000mm
1000mm
1100mm
1200mm
1500mm
2280mm
3500mm
26kg
35kg
65kg
30kg
40kg
74kg
35kg
48kg
88kg
when folded into its compact combination valise/carrybag/groundsheet even the
largest size can be handled by two men over difficult terrain.
the flexible P.V.C foam floatation collar allows the dam to fill without attendance. The
rim is also large enough to carry the weight of the filling hose.
the Flexidam is designed to be mounted on the top of a tower or in difficult terrain
and car accept a slope up to 10o and uneven ground.
a range of moulded nylon connectors are available which can be welded or
mechanically sealed to the Flexidam. Primarily 50mm flange, ball valve and cam lock
couplings are used which accept standard hose connections.
a web lug is welded to the central base of the Flexidam so it can be hung up for
cleaning and drying.
this aspect of the design ensures minimum windage in exposed positions or allows for
minimal excavation to drop below the surrounding terrain.
made from P.V.C. coated 'Trevira' high tenacity polyester fabrics in a range of
weights to suit respective sizes. All welded fabrication. Each Flexidam is filled to
capacity and tested for 48 hours prior to dispatch.
a simple glue and patch kit is supplied complete with easy instructions to follow. The
Flexidam can be returned to the factory for major repairs if economically viable.
from the standard models any size up to 350,000 litres can be designed and
fabricated
Covers
to keep out the debris these are offered as an optional extra.
Valise / Groundsheet /
Carrybag
this optional extra is ideal for storage, protection and cartage.
Comes complete with folding instructions.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 9.0
June 2009
FOAM PRODUCTS
Rugged and professional, a unit
designed for fast, one-man operation –
ideal for the protection of oil storage
and loading terminals, paint and solvent
stores, boiler rooms, ships‟ engine
rooms, helipads, oil rigs and similar high
risk locations. If fitted with a Macron
medium expansion (MX) branchpipe, the
MF140 can be used to suppress vapours
from flammable and toxic liquid spills.
Standard Equipment
ND 50 Variable Foam Inductor 200 lpm
LX Low Expansion Foam Branchpipe
200 lpm
Two Viking fire hoses 15m x 45mm
with instantaneous connectors.
One Man Operation
Large Diameter fill cap
Suitable for all types of foams
Maintenance free solid rubber wheels
Corrosion resistant body, painted steel frame
Alternative Fittings
Any Macron LX and MX with matched
inductors can be fitted to the MF140.
Alternatively, water spray branches can
be supplied for use with film forming
foam concentrates. International hose
couplings
made
to
customers
requirements are available.
140 litre capacity chemically-resistant polyethylene tank
Marine version available
Marine
version
include
gunmetal
inductors, stainless steel branchpipe and
chassis.
Performance
The performance of the MF140 is
governed
by
the
foam making
branchpipe. The figures in the chart to
the right reflect Macron‟s LX range of
low expansion foam branchpipes.
Description
Code
MF140 Mobile Foam Unit
MF140-C
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0
June 2009
FOAM PRODUCTS
500P Foam Proportioner
The Model 500P Foam Proportioner is a fully self-contained,
positive pressure, automatic foam concentrate to water
proportioner. It requires no outside electrical source for
power as it operates totally from the pressure generated by
the flow of water through the connected hose line
Description
Code
500P Foam Proportioner
31024
100P and 100B Models are also available on request
Flecks Model GF100 Foam Metering Device
Small, lightweight, portable
Operates on any high pressure or volume pump
Attached to the suction side of the pump with a tee
(nominal size ¾” MGHT) between the volute inlet and
suction hose
GF100 has a selection of six orifice settings plus a shut off
allowing various water additives (wetting agents, foams,
retardants, etc.) to be used at any percentage necessary
Built-in check valve to prevent water from flowing back
into water additive container when the pump is shut
down
Description
Code
Flecks GF100 Foam Metering Device
31025
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.1
June 2009
FOAM PROPORTIONING SYSTEM
The reliable Foam Proportioning System to
meet your needs.
Quenchmaster is an around the pump foam
proportioning system developed to provide simplicity
of installation and operation. This reliable foam
system provided in a range of models to suit various
flow rtes and pressure is available for remote
mounting or control panel mounting. Any of the
wide range of models can be retro fitted to an
existing vehicle or installed on a new fire fighting
vehicle.
CONSTRUCTION
Rugged construction of brass components and
housed in a fiberglass housing to provide
durability.
Service
Easy to service, simply flush out with clean
water after operation shutdown
FEATURES

12 Models to choose from

Available for panel or remote mounting

Flow rates 200 to 1500 litres per minute

Operating pressure 600 – 1000 kPa

Easy installation for retro fitting

Proprtion „A‟ Class Foam 0.1% to 1% and „B‟
Class foam 3% to 6
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.2
June 2009
FOAM PRODUCTS
Designed to produce long coherent
throws of low expansion foam using all
types of foam concentrate, they are
fully compatible with Macron‟s Variable
Inline Foam Inductors and are available
with on / off ball valve as standard on
all models.
Macron‟s
low
expansion
foam
branchpipes perform well with protein,
fluoroprotein, multi-purpose, ARC, FFFP
and AFFF concentrates with the
advantages of a longer throw and
superior cooling in comparison to
Medium Expansion Foam Branchpipes.
Construction
Stainless steel and brass construction
ensures optimum protection against
corrosion. The nozzle is made of brass
to
resist
corrosion
from
foam
concentrates; the couplings are either
bronze or aluminium.
LOW EXPANSION FOAM BRANCHPIPE
200 and 400 lpm flow models
Excellent foam quality with Superior cooling properties
Superior throw performance
Range of International couplings available
Ball Valve as standard
Self-inducting version available
Description
Part No.
200l/min - Standard
200l/min Self Inductive c/w p/up tube
400l/min
800l/min
31028
31030
Indent POA
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.3
June 2009
FOAM PRODUCTS
Capable of producing large quantities of
foam in situations requiring rapid foam
cover with low water usage, they are fully
compatible with Macron‟s Variable Inline
Foam Inductors and are available with an
optional on / off ball valve on all models.
Macron‟s Medium Expansion Foam
Branchpipes perform well with high
expansion fluoroprotein, multi-purpose
AFFF and ARC concentrates with the
advantage of producing five times more
foam with the same amount of water
when
compared
to
Low Expansion
Branchpipes.
MEDIUM EXPANSION FOAM BRANCHPIPE
200 and 400 litres / minute flow models available
Lightweight equipment with proven performance
Pressure gauge shows water pressures at branchpipe
Range of international couplings available
Construction
Stainless steel and tough polyurethane
construction ensures optimum protection
against corrosion. The nozzle is made of
light weight materials, as are the coupling
and shut-off valve, and produces a high
quality foam.
A strainer prevents
blockage by water borne particulates.
Description
200l/min
400l/min
Part No.
M225
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.4
June 2009
FOAM PRODUCTS
Macron Safety Systems Variable
Inline Foam Inductors provide a
simple and accurate means of
inducing foam compound into the
water supply.
Matched to a
complete range of Macron Foam
Branchpipes, the inductors are
suitable for accurately proportioning
all types of foam concentrate over a
1% to 6% range.
Manufactured in corrosion-resistant
materials, the inductors incorporate
a special by-pass valve to maintain
accurate foam pick-up and have a
design
pressure
loss
of
approximately 35% A marine
version is available for prolonged
use with sea water.
VARIABLE INLINE FOAM INDUCTOR
Corrosion resistant throughout
By-pass valve maintains accurate foam pick-up
For all types of foam concentrate over a 1% to 6% range
Marine version available for prolonged use with seawater
Macron also offer a range of foam
proportioning equipment for use in
fixed foam systems.
Fittings
Macron Safety Systems Inductors
are normally supplied with 70mm
alloy or gunmetal instantaneous
fittings.
However, these are
available
with
any
suitable
connectors or without fittings, the
base connections at each end being
2”BSP male.
The units are supplied complete
with foam pick-up tube.
An
optional on / off ball valve is
available.
Description
Part No.
200l/min
31026
400l/min
Z450
800l/min
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.5
June 2009
FOAM PRODUCTS
Although smaller than conventional
high expansion foam generators, the
Mini Fomax offers similar expansion
and foam output to its bigger brother.
It is suited to all normal high
expansion applications and powered
by a single water nozzle driving a
bronze pelton wheel. Simply connect
to a supply of synthetic foam
compound, such as Macron Highex,
and a water supply.
Mini Fomax is available with an
optional built-in foam inducing system
or can be run in conjunction with a
200 lpm inductor, such as the Macron
IND 50.
MINI FOMAX FOAM GENERATOR
Easily Portable
Uniquely small size
Optional built-in foam inducing
system
Excellent expansion and foam
output performance
Smoke extractor option
An optional 7.5m length of smoke
extraction ducting attached by quick
release strap converts the unit to a
smoke extractor
Description
Mini Fomax Hi-Ex Foam Generator
Part No.
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.6
June 2009
FOAM PRODUCTS
Fomax 7 Hi-Ex Foam Generator
The Fomax 7 is powered by a water turbine and
therefore all that is required for operation is a
supply of synthetic foam compound, such as
Macron Highex, and a water supply to enable
large volumes of high expansion foam to be
produced with the minimum of operational
difficulty.
Recessed controls make the Fomax 7 compact,
reducing the likelihood of damage during
operation and stowage. Additionally, solid
rubber, rot-proof feet provide protection to the
unit during deployment.
Features:
Variable expansion
Easily portable
Output up to 204 m3/min.
Automatic pressure control
Built-in by-pass system
Solid rubber rot-proof feet
Compact unit with recessed controls
Smoke extractor options
Wheeled model available
Description
Fomax 7 Hi-Ex Foam Generator
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.7
Part No.
Indent POA
June 2009
FOAM PRODUCTS
ANSUL THUNDERSTORM FOAM
Dwight lives in the South, Mitch to the North. Dwight circles the globe battling fires that engulf fuel storage
tanks and oil fields. Mitch travels too, but mainly to visit laboratories and test facilities. Dwight Williams owns
and operates Williams Fire & Hazard Control. Mitch Hubert is the senior chemist at the Ansul Fire Technology
centre.
So what do these two have in common?
One day, Dwight asked Mitch to invent a foam that was better than any on the market. Plus, Dwight was to
test it personally. So Mitch rolled up his sleeves and developed a product he knew would satisfy Dwight‟s high
expectations. Dwight then tested it under conditions far exceeding normal approval agency requirements.
Today, Mitch‟s foam is the most potent weapon in Dwight‟s firefighting arsenal.
Choose the foam that Mitch and Dwight built ….
ANSUL Thunderstorm
Alcohol-Resistant Aqueous Film-Forming Foams (AR-AFFF)
Premium foam concentrates for fires involving hydrocarbon or polar solvent fuels
Most effective agents for top-side storage tank applications
Unique ability to shed fuel during plunging application
Standard or freeze-protected formulas in various concentrations
Available in 5 gal. (19L), 30 gal. (114L), 55gal. (208L), and 265 gal. (1003L) Containers
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.8
June 2009
ANSUL THUNDERSTORM 1X3
ANSUL THUNDERSTORM 3X6
The Foam that Mitch & Dwight Built
Traditional AR-AFFF concentrate
Proportioning: 1% for Hydrocabon Fuels
x 3% for Polar Solvent Fuels
Storage Temperature Range:
35 – 120ºF (2 – 49ºC)
Most cost effective concentrate for
hydrocarbon firefighting. Increases foam
solution supply by a factor of three times
when compared with the performance of
traditional 3% concentrations
Proportioning: 3% for Hydrocabon
Fuels / 6% for Polar Solvent Fuels
Standard Storage Temperature
Range:
35 – 120ºF (2 – 49ºC)
Freeze-Protected Formula:
0 – 120ºF (-18 – 49ºC)
Replacement foam for existing
3/6% proportioning equipment
ANSUL THUNDERSTORM 3X3
ANSUL THUNDERSTORM 1X6
Takes the guesswork out of foam proportioning
Proportioning: 3% for Hydrocabon Fuels
x 3% for Polar Solvent Fuels
Standard Storage Temperature Range:
35 – 120ºF (2 – 49ºC)
Freeze-Protected Formula:
0 – 120ºF (-18 – 49ºC)
Requires just one proportioner setting for
all types of flammable liquids
Freeze protection and economy
Proportioning: 1% for Hydrocabon
Fuels x 6% for Polar Solvent Fuels
Freeze-Protected Formula:
0 – 120ºF (-18 – 49ºC)
For facilities that primarily use or
store hydrocarbon fuels, but
occasionally handle polar solvent
fuels
ANSUL FOAM PRODUCTS
Tyco Safety Products have a wide range of foam compound avail for selected risks for both class A and B fires.
More Information on Range of Products is available on request
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.9
June 2009
FOAM PRODUCTS – ANSUL 3X3 LOW VISCOSITY
AR-AFFF CONCENTRATE
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.10
June 2009
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.11
June 2009
FOAM PRODUCTS – ANSUL 3% (AFC-3A)
AFFF CONCENTRATE
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.12
June 2009
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.13
June 2009
FOAM PRODUCTS - SOLBERG
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 10.0.14
June 2009
PETROL GENERATORS
TYPE CAPACITY
SPG950
0.9kVA MAX
MG750
Rated output 0.52kVA
230VAC, 50Hz / 12VDC, 8.3A
2.2 litre fuel tank
L485 x W325 x H400mm
Weight 21.0kg
0.66kVA MAX
SGA3001Ha
TYPE CAPACITY
SGA3001Ha
2.2kW Max
SGB3001Ha
2.2kW Max
SGB4001Ha
3.6kW Max
DESCRIPTION
Rated output: 0.65kVA
3.0A, 230VAC, 50Hz / 12VDC, 8.3A
4 litre fuel tank (= 6hr run time)
Weight: 20.5kg
SGB3001Ha
DESCRIPTION
Genuine Honda reliable engines
AVR (automatic voltage
regulation
Rated output: 2.0kW
Open frame design
3.6 litre fuel tank
L545 x W415 x H405mm
Weight 35kg
Rated output: 2.0kW
DC output: 12V 8.3A
16 litre fuel tank
L595 x W414 x H495mm
Weight 45.8kg
Rated output: 2.0kW
DC Output: 12V 8.3A
25 litre fuel tank
L685 x W534 x H509mm
Weight 69.5kg
ENGINE
GP
2-stroke
CODE
167010
EYO8
2hp
4-stroke
(oil sensor)
167024
SGB4001Ha
ENGINE
HONDA
GX160
5.5hp
CODE
167055
HONDA
GX160
5.5hp
167057
HONDA
GX240
8.0hp
167058
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 11.0
June 2009
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 11.0.1
June 2009
HOSE
Premier Extra Lay flat Fire Hose
Polyester Jacketted
Black synthetic Epdm Rubber Lining
Burst Pressure – 45Kg/cm²
Proof Pressure – 23Kg/cm²
Meets BS : 6391 Type 1 & 2, DIN 14811, UL 219,
prEN 1924
Lloyds approved Marine Use
Description
Part No.
38mm x 30m
22328
45mm x 25m
22330
52mm x 25m
22310
65mm x 30m
22331
70mm x 25m
22332
90mm x 30m
22334
Hose Defender
Description
45mm
70mm
90mm
Part No.
22895
22896
22898
ForestFlo
Blend the strength of filament polyester yarns with the
abrasion and heat resistance of natural cotton, add
our exclusive Mertex lining plus our patented HydroWick process and you end up with this totally different
concept
in
self
protecting
forestry
hose.
This is UL approved and listed.
Cotton/Polyester Percolating Hose
Meets NRFA Approvals
Description
41mm x 30m Bare
41mm x 30m Coupled
Part No.
22410
22411
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 12.0
June 2009
SNAP-TITE HOSE
Snap-Tite LD is a premium quality, nitrile rubber covered fire hose that is manufactured using a unique
process which permanently bonds the nylon reinforcement to the nitrile rubber cover / liner.
LD is an easily coiled, non-kinking, high flow, lightweight hose that also resists abrasion, chemicals and
weathering by ozone. Extruded thru-the weave construction means that no adhesives are used therefore no
delamination.
Snap-Tite Duralight LD Fire Hose has full approvals for use in New Zealand Rural Fire fighting applications.
Construction
Nitrile Rubber Cover
and Liner w/Nylon Reinforcement
Temperature Range
-5º to 200ºF (-20º to 95ºC)
Coupling
70mm New Zealand Instantaneous
British Instantaneous
Storz
Forestry
Approvals:
Kitemark License KM 60099 to
BS-6391 Type 3 Specification
ABS Type Approval, Meets
Australian DEF (Aust) 5195A
and AS-2792-1992
NRFA Specification 1998 25mm and 41mm
Description
25mm x 30m
41mm x 30m
45mm x 25m
Part No.
SNAP25
SNAP41
SNAP45
70mm x 25m
SNAP70
89mm x 30m
SNAP89
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 12.1
June 2009
MUNICIPAL HOSE
Double jacket fire hose designed for maximum
strength and lightest weight. Ideal for high-rise
backpacks and/or heavy-duty municipal fire fighting
applications. Oversized waterways for maximum flow
and minimum friction loss. Half the weight and one
third the bulk of conventional rubber hoses, flexible
to -60°F (-51°C). Meets or exceeds NFPA 1961, ZZH-451.
Construction:
Circular woven, double jacket 100% virgin spun polyester.
Tube:
Extruded T.P.U., a superior ozone and age resistant elastomer.
Length:
MFG standard lengths up to 100' (30.5 m).
Jacket treatment:
Optional ENCAP encapsulation. Requires thin wall double
jacket tail gaskets in couplings
Bowl Size
Weight 50'
(15.2m)
Uncoupled
Proof
Pressure
Service
Pressure
Burst
Pressure
1 1/2"
(38mm)
1 15/16"
(49.2mm)
10.5 lbs (4.8kg)
800 PSIG
(5600kPa)
400 PSIG
(2800kPa)
1200 PSIG
(8400kPa)
1 3/4"
(45mm)
2 1/16"
(52.4mm)
12.0 lbs (5.4kg)
800 PSIG
(5600kPa)
400 PSIG
(2800kPa)
1200 PSIG
(8400kPa)
2"
(51mm)
2 5/16"
(58.7mm)
14.0 lbs (6.4kg)
800 PSIG
(5600kPa)
400 PSIG
(2800kPa)
1200 PSIG
(8400kPa)
2 1/2"
(64mm)
3.0"
(76.2mm)
18.0 lbs (8.2kg)
800 PSIG
(5600kPa)
400 PSIG
(2800kPa)
1200 PSIG
(8400kPa)
3"
(76mm)
3 1/2"
(88.9mm)
24.0 lbs (10.9kg)
800 PSIG
(5600kPa)
400 PSIG
(2800kPa)
1200 PSIG
(8400kPa)
Hose Size
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 12.2
June 2009
RUBBER HOSE RAMP
The SAVA Pipe‟s Bridge is a good solution for Firemen, Farmer, Woodworkers and the Building Industry.
Made out of highly resistant Rubber and endlessly expandable trough applicable modules is it suitable for
even highest requirements to hose pipes and cable.
•
•
•
Suitable for heavy Trucks to hose double pipes
Easy to carry and build up (incl. T-pieces for attaching of a 2nd bridge)
Highly suitable for uneven terrain.
TECHNCAL DATA
- DIMENSION: 860x300x105 mm
- WEIGHT : 14 kg
- GROOVE WIDTH: 91mm
- MAX. LOAD: 40 ton
•
•
•
•
Q & E CERTIFICATES
- ISO 14001
- ISO TS 16949:2002
Color:
Standard black with possibility of yellow reflection application
Temperature resistance:
-20°C till + 70 °C
Chemicals resistance:
Ozone, Oil, Petrol, brake fluid, cooler fluid and acid resistant (prevent permanent influence of this
substances).
Cleaning and care:
Hose down with steam and water cleaner
Please note that this product is also available in aluminium.
For more information on this product please contact your nearest sales representative.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 12.3
June 2009
HOSE REELS
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 13.0
June 2009
LIGHTMAN HELIPAD KIT
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 13.1
June 2009
MONITORS
Ansul MM1000
TFT Crossfire
Ansul FJM-150
Tyco Safety Products offer a wide range of Monitors.
For more information please contact your nearest Sales Representative.
TFT Blitzfire
TFT Tornado
TFT Protector Aluminum
Williams Ambassador
Williams Ranger 1.5
Williams Ranger 3
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 14.0
June 2009
NOZZLES
Nozzle Spray Jet
Description
Part No.
25mm x 1” FBSP Aluminium
26170
*25mm x 1” FBSP Bronze
Indent POA
*25mm x 1” FBSP Stainless Steel
POA
50mm x 1¾” FBSP Aluminium
26172
50mm x 1¾” FBSP Bronze
26173
50mm x 1½” FBSP Aluminium
Indent POA
50mm x 1½” FBSP Bronze
Indent POA
LA Short Branch 70mm x 45mm (1”3/4)
25080
LA Short Branch 70mm x 38mm (1”1/2)
25083
GM Short Branch 70mm x 45mm
25089
GM Short Branch 70mm x 38mm
25090
* Special Order Only
Nozzles Hose Reel
Description
Part No.
Nozzle, Hose Reel ½” Tail LA
Indent POA
Nozzle, Hose Reel ¾” Tail LA
Indent POA
Nozzle, Hose Reel, Snaplock Tail LA
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 15.0
June 2009
LANDING VALVE
Landing Valves – NZS/PAS 4505:2007
Marine approved Hydrant Valves available Special Order Only –
Enquire from your Sales Representative
Description
Part No.
Landing Valve 2-½” MBSP with Blank Cap
26556
Landing Valve Flanged with Blank Cap
26557
Hydrant Landing Valve ANSI flanged inlet 3” 150 outlet 70mm FI NZS
26557ANSI
Available with or without Flange to customer’s specification
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 15.0.1
June 2009
(TASK FORCE TIPS) NOZZLES
QUADRAFOG
ULTIMATIC
THUNDERFOG
BUBBLE CUP
QUADRAFOG & THUDERFOG NOZZLES
The Quadrafog and Thunderfog series of selectable gallonage fog nozzles will meet the needs of harsh
wildland, rural and urban environments where water conservation is important, yet the ability to provide
higher flow rates may be necessary for structural protection. Designed to be used alone or in combination
with ball shutoffs and pistol grips, the Quadrafog and Thunderfog series of nozzles are ideal for any
firefighting application. Compact and lightweight, these nozzles offer a wide selection of flows, and
provide a specially designed fog pattern for safe and effective fire suppression.
BUBBLE CUP - WATER FLOW
The Bubble Cup nozzle is designed for use as a conventional dual flow rate fog nozzle when the grey
sleeve is in the retracted position. It allows both high and low gallonage selections as well as straight
stream, fog, and flush patterns. Models available with a ball shutoff also have the option of either twist or
ball shutoff on the same unit. From the operator view, as the head is rotated to the left in a counterclockwise motion from the closed position, the nozzle will provide a straight stream and narrow fog pattern
in the low flow selection. As the head is rotated further, the nozzle will move to the straight stream, fog,
and flush positions of the higher flow.
NOTE: The 95 Series is Single Flow Rate Only.
BUBBLE CUP - FOAM FLOW
To use the aspirating feature of the Bubble Cup, the operator need only slide the gray sleeve portion of the
nozzle forward. With the sleeve in the fully extended position, a white line on the nozzle barrel will be
visible at the base of the grey sleeve. Rotation of the head when the sleeve is extended will provide the
operator control of reach and aspiration. If an immediate wide protective fog pattern is needed, the sleeve
can be retracted instantly to its regular position.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 15.1
June 2009
(TASK FORCE TIPS) NOZZLES
Task Force Tips
Handline Foam Application Kit
Class A and B Foams
In response to the wide spread introduction of the new 1%/3% multi purpose Class
B foam concentrates, TFT have developed a range of in-line induction devices that
are intended for use with both Class A and Class B foam concentrates. These devices
are specifically designed to be used with hand line hose/equipment and standard TFT
nozzles as currently used by the NZFS.
We have standard handline foam application kits which are available for all types of
Class A and B Foams. The TFT handline nozzles are all approved for use with all
types of foam. A full range of Foam application equipment accessories and
attachments are also available.
Enquire through your nearest Sales Representative for more information.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 15.1.1
June 2009
TASK FORCE TIPS FLOW METER
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 15.2
June 2009
FIREFLOW PORTABLE PUMPS
Transfer PUMP E30-3” Honda
Includes roll frame
Self priming to 8.5m
Dimensions : - L540 x W380 x H430mm
Weight 28kg
Engine: Honda GX160 5.5hp
Type Capacity: - 1000lpm, 32m head
Inlet 75mm Male Camlock
Outlet 70mm Female Instantaneous
Description
Code
E30-3” HONDA
101024
Twin Impeller Fire fighting Pump
Code
10.1293
Type
Capacity
FIREFLOW
PUMP
FKT 1½”
Description
Inlet: 1½”
Outlet: 1½” plus 2 x 1”
Engine
HONDA GX160 5.5 hp
Recoil start
300 lpm
90M head
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.0
June 2009
DEFENDER SERIES PUMP
Defender Series PFP-18hpVGD-MR –
Code DSPFP18HPVGDMR
18 hp Vanguard high quality pump with a single
discharge. Engine and pump are mounted on a
protective frame made of steel with shock
absorbers and folding handles
Engine specifications
B & S Vanguard 18hp at 3600 RPM, air cooled engine.
V-Twin cylinder, gasoline engine.
12V electric start with recoil start as backup.
22 litre integral fuel tank.
Low oil pressure warning light
Pump unit specifications
Direct drive C.E.T. single stage centrifugal pump.
Pump body made from resistant aluminum alloy.
Bronze impeller.
Bronze wear ring
Mechanical shaft seal.
Exhaust priming system, guaranteed up to 6 meters lift.
One delivery outlet with 1/4-turn bronze ball valve and 70mm
instantaneous adaptor.
One 3" (75 mm) male camlock inlet.
Dimensions: Length: 631 mm, Width: 542 mm, Height: 593 mm.
Weight: 78 kg.
Accessories
Swivel spotlight.
100 watts alternator.
Pressure gauge.
12 volt battery.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.1
June 2009
BB-4 PORTABLE FIRE PUMP
The Wildfire model BB-4 portable fire pump is an ideal unit for high volume remote watering, rural truck and
slip-on fire fighting systems in forestry and rural fire environments. High pressure up to 425 psi (2930 kPa)
is provided to operate very long hose lays and overcome pressure losses due to large elevation changes
often encountered in rugged wildland fire operations. The higher power makes it ideal for pumping at high
altitudes. A unique feature of the BB-4 pump is the quick release pump end that is inter-changeable with
our Mark-3 pump. This standardization allows for in-field pump and exchanges eliminating long equipment
down time and greatly reduces parts inventories at equipment service shops.
Engine Specifications
Engine
Briggs & Stratton Model Vanguard, 4-cycle, air-cooled, twin cylinder, overhead valve
Maximum power
18 HP (13.4 kW)
Starting system
Electric with backup recoil starter
Ignition system
Magnetron electronic
Charging system
16 amp alternator
Stroke
2.75" (70 mm)
Bore
2.97" (75.5 mm)
Displacement
570 cc (34.75 cubic inches)
Lubrication
Oil (full pressure)
Oil capacity
0.8 L replaceable oil filter
Fuel tank
12 L
Pump Unit Specifications
Detachable 4-stage centrifugal pump end, Model 12-16
Quick release pump clamp
Belt driven speed increaser
Lightweight aluminum alloy pump parts
Anodized pump parts for corrosion resistance
Stainless steel shaft
Mechanical rotary seal
Governor system for overspeed protection
2" (51 mm) NPSH suction threads
1 1/2" (38 mm) NPSH discharge threads
Fuel consumption 1.8 US gals/hour (6.8 L/hour)
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.2
June 2009
MARK 3- E PORTABLE FIRE PUMP
The backpack portable MARK-3 is the strongest
performing centrifugal fire pump of this type available.
A truly outstanding and reliable performer. The MARK-3
fire pump is designed to withstand the rigors of fire
fighting and is easily integrated into any existing
operation.
These facts combined with its rugged design features
have made the MARK-3 the standard wildland fire pump
around the world.
USDA Forest Service Qualified Specification 5100-274C.
Features
US Forest Service approved spark arrestor.
Fuel line 12-40IB-NZS with handle quick-connect R-712
Fuel air transport tank 5.3 US gals (20L) FA-552Q or
marine type tote tank
Operating tool kit
Rubber protection caps
Foam and retardant solutions pumping capability
Operating Manual
Engine Specifications
Rotax Model
185 cc c/w decompression switch
Maximum power 10 HP (7.46kW)
Engine
2-cycle, air cooled
Single cylinder with cast iron sleeve
Starting system Recoil with backup manual rope starter
Ignition system Electronic ignition
Stroke
2.40” (61 mm)
Bore
2.44” (62 mm)
Displacement
185 cc (11.29 cubic inches)
Lubrication
Oil in fuel mixture
Pump unit specifications
12-16, detachable 4-stage centrifugal pump end
Quick release pump clamp
Lightweight aluminium alloy pump parts
Anodized pump parts for corrosion resistance
Stainless steel shaft
Mechanical rotary seal
Automatic overspeed safety switch
Painted steel frame
2” (51mm) NPSH suction threads
1 ½” (38mm) NPSH discharge threads
Fuel consumption 1.2 US gals/hour (4.5 L/hour)
Length 23” (58cm)
Width 12” (31cm)
Height 16 ¼” (41cm) Weight 58lbs (26.3kg)
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.3
June 2009
PORTABLE FIRE PUMP ACCESSORIES
Wajax Suction Hose
Reinforced external wire bound. Pressure tested to
Description
Code
2” x 2.4m c/w 2” female camlock and 2”
male camlcok
2” x 3m c/w 2” female camlock 2” male
hose tail
2” x 4m c/w 2” female camlock 2” male
hose tail
36767
3” x 2.4m c/w 3” male and female
camlocks
36762
36770
36770BB4
Wajax Foot Valve
Description
Code
Wajax Footvalve B-5258
36775
Wajax Hand Primer
A quick and easy way to prime a pump with 2” x 10‟
(51mm x 3.1m) suction hose and 8‟ (2.4m) lift in less
than 20 seconds. Particularly useful and effective if
pump is used to draw water from well, tank etc. 1 ½”
(38mm) female NPSH or NH (brass insert). Length: 12
½” (31.7cm) 2½lbs (1.1kg).
Description
Code
Wajax Hand Primer Aluminum
36758
Wajax Hand Primer Plastic
B5980P
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.4
June 2009
CENTRIFUGAL PUMP
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 16.5
June 2009
POSITIVE PRESSURE VENTILATION FANS
Part No: 716G4-H, 16", PPV, 4.0 HP, Honda
engine
The 716 is designed to compact dimensions that fit
the tightest pumper compartments. They feature
the highest horsepower in their class for maximum
airflow. Perfect for the department buying their first
PPV or outfitting their entire fleet of engines.
Outfitted with an economical Honda engine.
H.P:
4.0
Depth/Width/Height:
16.0”x20.0”x20.0”
Weight:
62#
RPM:
3575
Angle:
18
CFM:
11740
Part No:718G4-H - 18", PPV, 6.5 HP, Honda
Engine
The 718 is designed to compact dimensions that
fit the tightest pumper compartments. They
feature the highest horsepower in their class for
maximum airflow. Perfect for the department
buying their first PPV or outfitting their entire
fleet of engines. Outfitted with a World Class
Honda GX200 Over head valve engine, with low
oil alert.
H.P:
6.5
Depth/Width/Height:
18.75" x 22" x 20.75
Weight:
82#
RPM:
3,535
Angle:
18
CFM:
15,590
Part No:718G4-T- 18", PPV, 6.0 HP,
Tecumseh Engine
The 718 is designed to compact dimensions that fit
the tightest pumper compartments. They feature
the highest horsepower in their class for maximum
airflow. Perfect for the department buying their first
PPV or outfitting their entire fleet of engines.
Outfitted with an economical Tecumseh OHH60
over-head valve engine, with low oil alert.
H.P:
6.0
Depth/Width/Height:
18.75" x 22" x 20.75"
Weight:
79#
RPM:
3,535
Angle:
18
CFM:
15,590
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 17.0
June 2009
SMOKE GENERATOR
Description
Smoke Generator
Glycol Smoke fluid 5 litre container
Code
S595
SMOKEFLUID
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 18.0
June 2009
SALVAGE SHEET
Tyco Safety products provide the standard salvage sheet which is carried on fire Appliances
and manufactured to NZFS specification
It is 3.6 x 3.6 meters
Manufactured from 400 gram PVC half white the other have is Hi Vis orange.
It has reinforced eyelets 5 per side spaced 90cm apart.
Attached to the eyelets is 8mm line 90cm long used for securing the sheet
We are also able to manufacture customized sheets as required
For information please contact your nearest sales representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 19.0
June 2009
PERSONAL PROTECTIVE CLOTHING
Fire Suits - Protective Clothing For Firefighters
The Latest in fabric
Nomex
Delta C and Delta T
Kermel HTA
PBI Kevlar
AEROTEX Moisture barriers
T-GARD Thermal Liners
Several styles and fabric combinations
are available from:
Proximity Suits
SOLAS Suits
Offensive and Defensive
Jackets and Trousers
Structural Jackets and Trousers
Wildland Jackets and Trousers
For further information on:
Boots
Hoods
Helmets
Gloves
And more
Contact Tyco Safety Products
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0
June 2009
PERSONAL PROTECTIVE CLOTHING
SOLAS – Aluminized Rayon Fire Suit
Ellgard Aluminised Fire Suits have been certified by
the American Bureau of Shipping (ABS) to SOLAS
74/78 REG 11-2/17 as amended and BS 6249 Part
1:1982 The DOT survey of Fire Protection Sec.
10.4.
Ellgard Aluminised Fire Suits are made from
aluminized rayon which meets the requirements of
BS 6249 Part 1:1982. Suits are available in a two
piece coat and trousers combination or a one piece
overall
S.O.L.A.S approved
Coat
Fabric coat hanger loop for drying
Helmet and visor with an aluminized rayon
neck flap
Contoured collar designed for maximum
thermal protection
Thermal throat tab with Velcro closure
Heavy duty zipper with 50mm Velcro closure
system on outside storm flap for extra heat
and moisture protection
Y style design coat to provide ease of mobility
and minimum coat rise
Sleeves feature Velcro closure tabs for total
protection
Trousers
Trousers feature an adjustable Velcro side tab
Trouser braces are included
Cuffs feature Velcro closure tabs for total
protection
Steel toe molded boots
Description
Jacket
Trouser
Boots
Gloves – Firestar Pyrohide
Gloves – Aluminized Rayon
Helmet – Bullard
Gear Bag
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0.1
Part No
CER100U
TER100U
ECBOOT11
36732
FFG4
37309
GB300
June 2009
PERSONAL PROTECTIVE CLOTHING
NRFA Rural Fire Overall
Complies to AS/NZA 4824:
Material - 237gsm indura ultrasoft
The material retains its fire retardant
properties for the life of the garment.
The Neck ankle and wrist can be closed
with hook and loop tags. All pockets and
flaps have closures. The garment is also
fitted with a radio pocket and rural
shoulder patches.
Available in Yellow or Orange
Sizes from 5 - 14
CODE
Yellow – OVERYRFIRE- (Size)
Orange – OVERORFIRE- (Size)
Fire Hoods
Material - Kevlar/PFR Rayon
Thickness - Two layer
Style: Balaclava
Colour - Natural
The Firetec anti-flash hood protects you from a
flash over, preventing flame burn to the skin but
still allows you to be aware of your environment.
The two layer offers good protection and is
comfortable even when the hood is worn for
prolonged periods.
The Firetec anti-flash hood tucks nicely into your
jacket or overall collar for comfort and a good
seal.
The Firetec anti-flash hood is machine washable,
the fire retardant qualities can not be washed out.
The Firetec anti-flash hood is NFPA 1971:2000
edition and prEN 13911 compliant, UL listed 85TF
The Firetec anti-flash hood meets AS2755.1/1985
for flame stop and thermal insulation
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0.2
June 2009
PERSONAL PROTECTIVE CLOTHING
RURAL SWANNDRI
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0.3
June 2009
For more information please contact your nearest sales representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0.4
June 2009
RURAL FIRE JACKET
The Rural Fire Jacket is manufactured from 100% wool, 440 gsm showerproofed with PFZ Zipro
Fire Retardant treatment.
Colour Black with 3M day/night yellow/silver 50m reflective tape. Comes complete with silver
reflective badge on back with Rural Fire printed in Black. The Rural Fire jacket also has NRFA
Shoulder badges.
Features:
Long sleeve, hip length
NRFA Shoulder Badges
High collar ,self standing with flap across to chin
Two patch pockets on front
Radio pocket on left hand chest
Cuffs are closed with hook and loop tape
Concealed front zip
For more information please contact your nearest sales representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.0.5
June 2009
PERSONAL PROTECTIVE EQUIPMENT
Helmet
The Bushfire Helmet HF44V is a light weight helmet comes
c/w visor, neck flap, and chin strap. Standards Approved to
AS/NZS 1803 Type3
Available in yellow or white or fluro yellow
Part N0 (Yellow):37307
Part No (White): 37307W
Part No (Fluro Yellow) : 37307FY
Helmet – 37309 (Structural)
The Bullard PX-AS Structural helmet is lightweight, c/w
neckflap, chin strap and visor – certified to AS4067:1994,
NFPA1972-1992, US-0 SHA CNFPCA 1997 and BNQ 1923410.
Available in yellow, white, red or blue
Fire Star – Structural Fire Fighter Glove Level 2
The Firestar glove has additional benefits of a FR neoprene
coated Kevlar Patch across the palm and thumb which
provides increase heat protection and enhanced abrasion
resistance where you need it. This design features a
PYROHIDE grain leather outer in a Gunn cut pattern and a
knitted Nomex/Kevlar wristlet cuff with a trace of elastane
for recovery. Barrier protection is provided by a Gore-tex
MVP membrane which is chemically bonded to the Kevlar
lining. This design provides the wearer with a high levels
of dexterity and protection.
The glove is manufactured to EN 659 and is available in
sizes XS,S,M,L,XL
Wildland Glove
Our entry level glove offers protection at an affordable
price. Specifically designed for Wildland fire-fighting, this
style features a water resistant first grade aniline cowhide
leather shell sewn in an inseam gunn pattern with an inset
thumb and an elastic gathering across the back of the
wrist. Finished with a tubular knitted KEVLAR wristlet cuff,
the glove is made to a generous length of approx 35 cms
from finger tip to cuff. It is designed to offer the wearer a
high degree dexterity as well as protection during wildland
fire-fighting duties.l
The glove is Manufactured to ISO 15383 type 1 and
AS2161.6 (INT) Level 1
Available in sizes XS, S, M, L, XL.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.1
June 2009
TAIPAN FIRE FIGHTING BOOTS
Taipan Structural Fire Boot
Ideal for Urban and Rural Fire fighters
Certified to AS/NZS4821
Sizes available 2 - 14
For more information please contact your nearest Sales Representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.2
June 2009
RURAL FIRE GOGGLES
Rural Fire Goggles
Wildland Firefighting and Technical Rescue
The Strikestream Series represents ESS‟s line of wildland firefighting, technical rescue, and EMS goggles.
This series is built to offer the highest safety standards while maintaining comfort, optical clarity, and
protection. All Strikestream goggles are Federal OSHA and ANSI compliant, and lenses exceed the U.S.
Military‟s MIL-V-43511C ballistic impact requirements.
Features:
Ballistic Impact rated
Full-perimeter ventilation and filtration system
Wraparound strap with Velcro
2.4mm polycarbonate lens
Clear zone anti-fog and anti-scratch lens coatings
Full wrap around strap with Velcro
Patented Speed clips for quick strap adjustment
For information on other models of the ESS Eye Protection Range please contact your nearest sales
representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.3
June 2009
RURAL FIRE GOGGLES
The new and exciting Rural Fire
Goggle Code WVF90BFRCL multipurpose goggle from Unisafe
provides protection against a wide
range of hazards.
 Contoured streamlined design improves
facial fit and vision
 Anti-fog moulded polycarbonate medium
impact resistant lens
 Unvented style
 Design allows wearing
prescription specs
of
The soft flexible body of the goggle
shapes
to
facial
contours
maximizing comfort and seal. The
poly carbonate anti-fog lens is
medium impact resistant and
suitable
for
chemical
splash
situations when handling Class A
Foam and other chemicals on the
fire ground.
The lens is easily
removed to allow replacement. The
goggle is fitted with a washable,
wide elasticized headband allowing
quick adjustment and compliments
wearer acceptance.
most
 Comes with soft foam face seal for
comfort and protection
Ideal for heli pad operation when
working with helicopters or smoky or
dusty conditions encountered on the
fire ground.
The goggle meets NRFA Approvals for PPE – AS/ NZS 1337and
BS EN 166: 2002 standards.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 20.3.1
June 2009
RESCUE TOOLS
Hose Hook
The Hose Hook is an innovative patent pending multipurpose tool that acts as a handle for carrying hose
rolls. Works with up to 5 inch hose. Fits into a
standard turnout gear pocket. Its integral wrench
tackles up to 2 ½ inch rocker lug couplings and most
4” (100 mm) and 5” (125 mm) Storz couplings.
Wrenches foam bucket lids open easily. Or use the
hook area‟s rounded shape to grab, walk, and drain
most hose. Slides over a hinge to block the door.
Molded from lightweight, durable nylon. Bracket for
apparatus mounting included.
Res-Q-Me Tool (Part No: RQM100)
The Res-Q-Me is designed to work in emergency
situations. With its integrated tool steel window
punch, the Res-Q-Me can quickly pop out windows
allowing you to extricate yourself from a vehicle. The
heavy-duty seat belt cutter makes short work of
vehicle seat belts and other web materials.
32014C
Fireman’s Axe (Part No: 32014)
A tool carried by all municipal and rural firefighting
agencies. 36” (91cm) wooden bent handle, overall
weight 6lbs (2.7kg).
Also available Axe bulkhead stowage clip (32014C)
Axe Aircraft Small Part No: 32012
This is a small style axe, comes with insulated handle
rated to 22,000 volts.
Also available Axe bulkhead stowage clip (32012C)
32012C
Hooligan Tool
Part No: BG622
- 30” Hooligan Tool
Hooligan-36 - 36” Hooligan Tool
This is a versatile rescue to assist firefighters to gain
entry. Available in 30” or 36” either standard or with
cutter claw.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 21.0
June 2009
RESCUE TOOLS
The basket stretcher is made to suit a wide range of rescue and emergency situations.
Designed for quick and easy assembly, and for safe and rapid operating. When lifted with our 4 point
4 leg adjustable lifting Harness.
The break apart version enables a single operator to carry it to the emergency site in most situations
with its assembly being achieved in seconds. Strong and robust materials ensure a long life.
CE Marked
For information please contact your nearest sales representative
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 21.0.1
June 2009
SPILL-X – ANSUL SPILL CONTROL PRODUCTS
Acids, caustics, solvents, formaldehyde… no matter what
the spill, make sure you have an ANSUL® SPILL-X®
spill treatment agent on hand. It’s the easiest, fastest,
and most efficient method to handle a small to medium
chemical spill before it becomes a big problem.
SPILL-X-A® agent will neutralize and solidify most
organic and inorganic acids, including hydrofluoric acid
SPILL-X-S® agent is a solvent adsorbent for organic
materials
like
benzene
or
xylene.
SPILL-X-C® agent is a neutralizer and solidifier for
caustics
such
as
sodium
hydroxide.
SPILL-X-FP®
agent
polymerizes
and
solidifies
formaldehyde spills.
Spill Control Products
Description
Part No
Spill-X A (Acid Neutraliser)
Indent POA
Spill-X C (Caustic Neutraliser)
Indent POA
Spill-X S (Solvent Adsorbent)
Indent POA
Spill-X FP (Formaldehyde Polymerizer)
Indent POA
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 22.0
June 2009
SPILL CONTAINMENT KITS
240Ltr Premium Spill Containment Kit
Hydro Carbon Spill Containment kits are ideal for taking care of small spills around
service station forecourts and industrial sites.
Chemical Spill Containment Kits are ideal for industrial sites, schools, dangerous
goods storage and general mop up of chemical spills.
Product Code: ASK240CHEP
ASK240OILP
– Chemical
– Hydro Carbon (oil, diesel, petrol spill kit)
Smaller kits available in carry bags
SPILLKIT25H – Hydro Carbon
SPILLKIT50H – Hydro Carbon
Contains:
10 x Heavy Absorbent Pads
White (Hydro Carbon kit only)
Blue (Chemical kit only)
3 x 2.4m Fibre Filled Absorbent Socks
4 x Fibre Filled Absorbent Pillows
3 x 15kg bags of Absorbent Fibre
1 x Disposal Bag
1 x Dust Respirator
1 x Disposable Overall
1 x Pair Heavy Duty PVC Gloves
1 x Wheelie Bin
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 22.1
June 2009
STANDPIPE
Standpipe Contractors
Description
Standpipe Contractors
Part No.
26208
Standpipe Brigade Double Head
Controlled
Description
Standpipe Brigade Double Head
Controlled (no Blank Cap)
Standpipe Double Head
uncontrolled
Part No.
26233
26232
Standpipe Brigade Single Head Swivel
Description
Standpipe, Brigade Single Head
Swivel
Part No.
26204
Hydrant Key & Bar
Brigade aluminum hydrant Key & Bar
Description
Brigade
Contractors Galvanised
Contractors T-Bar one piece
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 23.0
Part No.
26218
26226
26227
June 2009
SUCTION COUPLINGS AND ACCESSORIES
Coupling Sets (1 x Female, 1 x Male): NZS/PAS4505:2007
Description
Part No.
Suction Coupling Set 100mm LA
RB29033
Suction Coupling Set 140mm LA
Indent POA
Coupling Female Half Only
Description
Part No.
Suction Female 100mm Female Round
Thread Swivel LA
Suction Female 140mm Female Round
Thread Swivel LA
29033F
SC140F140T
Coupling Male Half Only
Description
Part No.
Suction Male 100mm Male Round Thread LA
RB29033M
Suction Male 140mm Male Round Thread LA
Indent POA
Coupling Washers
Description
Part No.
Suction Coupling Washer 75mm
P4570
Suction Coupling Washers 100mm
GP4576
Suction Coupling Washers 140mm
GP4577
Suction Adaptors
Description
Female R.T 100 x 100 MBSP LA
Other sizes and configurations
Part No.
58900
Indent POA
Blank Caps:
Description
Part No.
Suction Blank Cap Female 100mm Female
Round Thread LA, complete with chain
Suction Blank Cap Female 140mm Female
Round Thread LA, complete with chain
BC100FRT
BC140FRT
Strainers
Description
Part No.
Suction Strainer 75mm FRT
26432
Suction Strainer 100mm FRT
26433
Suction Strainer 140mm FRT
Indent POA
Suction Strainer 75mm Camlock
36763
Other Components
Description
Part No.
Suction Coupling Spanner
29035
Basket Strainer 140mm
26495
Basket Strainer 100mm
26494
Basket Strainer 75mm
26493
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 23.1
June 2009
SUCTION HOSE
Suction Hose
The suction hoses DIN EN ISO 14 557, Type A,
are smooth inside, black ribbed outside, SBRQuality without external spiral. Couplings
attached in both spiral free ends. Ozone
resistance acc. to ISO 7326 : 1991.
Test Certificate number ZPC 5002 for A-110
available.
Available with round thread, Storz or
Camlock Couplings
Part No:29373C
100mm x 2.4 M c/w RT Couplings
Tyco Safety Products have a full rang of suction hose from 50mm up to 140mm with
couplings of your choice
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 24.0
June 2009
TORCHES
Tyco Safety Products offer a wide range of Streamlight Torches.
For more information please contact your nearest Sales
Representative.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 25.0
June 2009
THERMAL IMAGING CAMERAS
T3XT IMAGER
Firefighters appreciate the simple operation and uniquely functional
design of the T3XT. The backlit 3.5 inch LCD display is viewable at
arms length, enhancing its visibility in smoky conditions.
Description
T3XT Imager
Code
T3XT
T3MAX IMAGER
From blue, to yellow, to red-hot, the T3MAX brings you revolutionary
thermal imaging color technology exclusively from Bullard.
Description
T3MAX Imager
Code
T3MAX
Accessories for T3XT & T3MAX
Mobile Command Center
Mobilelink Hand Held Receiver
T3 Transmitter
T3 Receiver
T3 Standard Charger
T3 Powerhouse
T3 Handle
Glare Shield
T3alk Alkaline Battery Case
T3 Retractable Strap
T3nimh Rechargeable Battery
T3 Extended Warranty
Code
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
T4 THERMAL IMAGER
Higher performance, wider view and closer to the action, the Bullard
T4 brings you ultra-high resolution and a widescreen display within a
small package.
Description
Code
T4 Thermal Imager
T4BULL
Accessories for T4
Code
T4 Glare Shield
Mobile Command Center
Mobilelink Hand Held Receiver
T3/T4 Transmitter
T3/T4 Receiver
T3/T4 Standard Charger
T3/T4 Handle
T3alk Alkaline Battery Case
T3/T4 Retractable Strap
T3nimh Rechargeable Battery
Tacport Accessory Block
T4 Extended Warranty
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
Indent
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 26.0
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
POA
June 2009
WATERWAY EQUIPMENT
Description
Hose Washing Machine
Code
29810
The hose washing attachment permits
thorough, yet protective washing without
brushing of fire hoses up to 90mm i.d. Two
cones shaped pressure jets are washing the
hose twice during each application. The impact
of the pressure jets from two annular gaps
imparts a forward movement to the hose. The
hose washing attachment requires only normal
pipeline pressure Available with Instantaneous
male adaptor
Description
Dividing Breaching
Code
25259C
Dividers are used for distributing the
extinguishing medium from one feed line over
several hose lines, or in special cases for
collecting it in the reverse direction. Each hose
line can be shut-off individually by means of a
stop valve. The stop valve of the dividers must
be according to DIN 14365 easily operated in
the usual flow direction at 16 bar and in the
opposite direction at 6 bar.
Description
Ejector Pump – Adjustable
with non Return Valve
Code
32267B
Simple, but very effective to drain cellars,
shafts and building pits and useable to supply
transport water in case the water supply is in
an unfavourable position. The housing is
adjustable in order to bring the inlet and outlet
in a good operating position. Two built-in nonreturn valves avoid backflow of the water.
Lowest suction lift is 25 mm. Minimum water
pressure is 3 bar.
P O Box 15492, Portage Road, New Lynn, Auckland, New Zealand
Ph: +64 9 826 1716
Fax: + 64 9 826 1868
Email: [email protected]
Section 27.0.1