1600 SS Curtain Wall System

JULY, 2016
1600 SS Curtain Wall System
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
EC 97911-099
FEATURES
Features
• 1600 SS is an outside glazed captured or SSG curtain wall system
• 1600 SS has 2-1/2" (63.5) sight lines
• Standard 6" (152.4) or 7-1/2" (190.5) depth systems
• Standard infill options 1/4" (6.4) and 1" (25.4), other infills available
• Thermally Broken by means of a continuous 1/4" (6.4) low conductance spacer
• A pre-glazed option, 1600 SS (Preglazed), is also available
• Perimeter seal can be installed at the pressure plate or mullion shoulder
• 1600 SS can be supplied fabricated and KD or in stock lengths
• Interlocking mullion design eliminates need for anti-buckling clips
• Concealed fastener joinery creates smooth, monolithic appearance
• EPDM gaskets and thermal break
• Screw spline joinery method allows shop assembly of ladder sections, reducing field labor
• Corners available with shear block fabrication method
• Offers integrated entrance framing systems
• Silicone compatible glazing materials for long-lasting seals
• Two color option
• PermanodicTM anodized finishes in seven choices
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
• Painted finishes in standard and custom choices
Optional Features
• Captured system thermal separator can be pre-installed into pressure plate
• Fiberglass pressure plates available
• Captured and SSG systems with standard Kawneer windows and GLASSventTM windows for
curtain wall
• Captured system Integrates with standard Kawneer windows
• Deep and bullnose covers available
• Integrates with VersoleilTM SunShade Outrigger System and Horizontal or Vertical Single
Blade System
• Profit$MakerTM plus die sets available
Product Applications
• Ideal for low to mid-rise applications where high performance is desired
• Most of the product assembly can be done in the shop rather than the field. This allows for
better quality control and reduces expensive field labor.
For specific product applications,
Consult your Kawneer representative.
kawneer.com
ADMD060EN
1
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
BLANK PAGE
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
EC 97911-099
JULY, 2016
JULY, 2016
1600 SS Curtain Wall System
EC 97911-099
3
INDEX
Architects - Most extrusion and window types illustrated in this catalog are standard products for Kawneer. These concepts have been expanded
and modified to afford you design freedom. Some miscellaneous details are non-standard and are intended to demonstrate how the system can be
modified to expand design flexibility. Please contact your Kawneer representative for further assistance.
BACK PAN DETAILS..........................................................................17
ANCHORING.................................................................................18,19
WIND LOAD / DEAD LOAD CHARTS......................................... 20-25
THERMAL CHARTS .................................................................... 26-41
LAWS AND BUILDING AND SAFETY CODES GOVERNING THE DESIGN AND USE OF GLAZED ENTRANCE,
WINDOW, AND CURTAIN WALL PRODUCTS VARY WIDELY. KAWNEER DOES NOT CONTROL THE
SELECTION OF PRODUCT CONFIGURATIONS, OPERATING HARDWARE, OR GLAZING MATERIALS,
AND ASSUMES NO RESPONSIBILITY THEREFOR.
Metric (SI) conversion figures are included throughout these details for reference. Numbers in parentheses
(
) are millimeters unless otherwise noted.
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
PICTORIAL VIEW.................................................................................5
CAPTURED MULLION FRAMING DETAILS.......................................6
SSG MULLION FRAMING DETAILS....................................................7
ENTRANCE DETAILS.......................................................................8,9
UNITWALL FRAMING DETAILS........................................................10
(RTS) CAPTURED MULLION FRAMING DETAILS......................11,12
ENTRANCE DETAILS (RTS)..............................................................13
CORNER DETAILS........................................................................14,15
GLASSventTM WINDOWS FOR CURTAIN WALL/WINDOWS...........16
The following metric (SI ) units are found in these details:
m –meter
cm – centimeter
mm –millimeter
s –second
Pa –pascal
MPa –megapascal
Kawneer reserves the right to change configurations without prior notice when deemed necessary for product
improvement.
kawneer.com
ADMD060EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
BLANK PAGE
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
4
EC 97911-099
JULY, 2016
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
kawneer.com
1600 SS Curtain Wall System
EC 97911-099
PICTORIAL VIEW
ADMD060EN
5
PERIMETER
PRESSURE PLATE
6
8
3
7
9
9A
ENTRANCE
DETAILS
4
4A
5
5A
OPTIONAL
FIBERGLASS
PRESSURE PLATE
ADMD060EN
1
6"
(152.4)
7-1/2"
(190.5)
1
1A
2
2
ANCHOR
DETAILS
4
ELEVATION IS NUMBER KEYED TO DETAILS
4A
5A
5
PERIMETER
PRESSURE PLATE
PERIMETER MULLION
kawneer.com
© Kawneer Company, Inc., 2014
CAPTURED MULLION FRAMING DETAILS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1/2"
(12.7)
1600 SS Curtain Wall System
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1A
2-1/2"
(63.5)
6
EC 97911-099
JULY, 2016
SCALE 3" = 1'-0"
PERIMETER MULLION
3
CORNER
DETAILS
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
7
1/2"
(12.7)
kawneer.com
6"
(152.4)
7-1/2"
(190.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
1600 SS Curtain Wall System
EC 97911-099
SCALE 3" = 1'-0"
6, 6A
7, 7A
11
ENTRANCE
DETAILS
6
7A
4
4A
6A
8
9
ADMD060EN
9A
2-1/2"
(63.5)
OPTIONAL
FIBERGLASS
PRESSURE PLATE
7
SSG MULLION FRAMING DETAILS
1
1A
2
2A
ANCHOR
DETAILS
10
3
CORNER
DETAILS
5
5A
ELEVATION IS NUMBER KEYED TO DETAILS
10
11
2-1/2"
(63.5)
2-1/2"
(63.5)
3
2
2-1/2"
(63.5)
2-1/2"
(63.5)
3/4"
(19.0)
ADMD060EN
1
C/H
ELEVATION IS NUMBER KEYED TO DETAILS
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
TRANSOM BAR
7-1/2"
(190.5)
6"
(152.4)
3/4"
(19.0)
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING OFFSET ARM
CONCEALED OVERHEAD CLOSER
TRANSOM BAR
DOOR JAMB
7-1/2"
(190.5)
CENTER HUNG
6"
(152.4)
4
3
TRANSOM BAR
CENTER HUNG
WITH CONCEALED OVER
HEAD CLOSER
kawneer.com
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
ENTRANCE DETAILS
© Kawneer Company, Inc., 2014
DOOR JAMB
BUTT HUNG
OR
OFFSET PIVOT
1-3/4"
(63.5)
1/8"
(3.2)
1600 SS Curtain Wall System
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
B/H or O/P
2-1/2"
(63.5)
2
1-3/4"
(63.5)
1/8"
(3.2)
6"
(152.4)
7-1/2"
(190.5)
1
1-3/4"
(63.5)
1/8"
(3.2)
6"
(152.4)
7-1/2"
(190.5)
8
EC 97911-099
JULY, 2016
SCALE 3" = 1'-0"
7-1/2"
(190.5)
6"
(152.4)
4
1A
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
ENTRANCE DETAILS
SCALE 3" = 1'-0"
5
7-1/2"
(190.5)
2-1/2"
(63.5)
6"
(152.4)
B/H or O/P
5
Optional
Interior Cover
ELEVATION IS NUMBER KEYED TO DETAILS
FLUSH TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
FLUSH DOOR JAMB
BUTT HUNG
OR
OFFSET PIVOT
6
7-1/2"
(190.5)
6"
(152.4)
6"
(152.4)
2-1/2"
(63.5)
7-1/2"
(190.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
6
5A
Optional
Interior Cover
2-1/2"
(63.5)
BUTT HUNG
OR
OFFSET PIVOT
6
7-1/2"
(190.5)
6"
(152.4)
6"
(152.4)
2-1/2"
(63.5)
7-1/2"
(190.5)
ALTERNATE SSG
FLUSH DOOR JAMB
5B
2-1/2"
(63.5)
FLUSH TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
ALTERNATE
SSG DOOR JAMB
6
2-1/2"
(63.5)
kawneer.com
BUTT HUNG
OR
OFFSET PIVOT
6"
(152.4)
7-1/2"
(190.5)
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
FLUSH TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH LCN 2030 COC CLOSER
3/4"
(19.0)
ADMD060EN
9
3"
(76.2)
PERIMETER
PRESSURE PLATE
1A
1
1A
6
7
4 9
4A
ADMD060EN
1
6"
(152.4)
7-1/2"
(190.5)
2A
8
3
5
5A
ELEVATION IS NUMBER KEYED TO DETAILS
3
4A
4
5A
5
PERIMETER
PRESSURE PLATE
PERIMETER MULLION
kawneer.com
© Kawneer Company, Inc., 2014
UNITWALL FRAMING DETAILS
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1/2"
(12.7)
SCALE 3" = 1'-0"
2-1/2"
(63.5)
1600 SS Curtain Wall System
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2
2A
3"
(76.2)
10
EC 97911-099
JULY, 2016
NOTE: SEE PAGE 7 FOR VERTICAL MULLION DETAILS
PERIMETER MULLION
2
© Kawneer Company, Inc., 2014
3"
(76.2)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2
6
7
kawneer.com
3"
(76.2)
1/2"
(12.7)
EC 97911-099
SCALE 3" = 1'-0"
1A
9
ENTRANCE
DETAILS
2-1/2"
(63.5)
JULY, 2016
1600 SS Curtain Wall System
(RTS) CAPTURED MULLION FRAMING DETAILS
(RTS) - Reversed Thermal Separator
PERIMETER
PRESSURE PLATE
PERIMETER MULLION
1
1A
CORNER
DETAILS
4
ADMD060EN
1
6"
(152.4)
7-1/2"
(190.5)
2A
ANCHOR
DETAILS
3
8
2
5
5A
ELEVATION IS NUMBER KEYED TO DETAILS
3
4A
4
5A
5
PERIMETER
PRESSURE PLATE
PERIMETER MULLION
11
1/2"
(12.7)
2-1/2"
(63.5)
(RTS) CAPTURED MULLION FRAMING DETAILS
6
8
7
9
ADMD060EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SCALE 3" = 1'-0"
6"
(152.4)
7-1/2"
(190.5)
12
EC 97911-099
JULY, 2016
(RTS) - Reversed Thermal Separator
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
ENTRANCE DETAILS (RTS)
SCALE 3" = 1'-0"
(RTS) - Reversed Thermal Separator
1
1-3/4"
(63.5)
2-1/2"
(63.5)
1/8"
(3.2)
4
1
C/H
B/H or O/P
(RTS) ENTRANCE ELEVATION
TRANSOM BAR
ELEVATION IS NUMBER KEYED TO DETAILS
BUTT HUNG OR OFFSET PIVOT
WITH SURFACE CLOSER
7-1/2"
(190.5)
6"
(152.4)
DOOR JAMB
BUTT HUNG
OR
OFFSET PIVOT
2
6"
(152.4)
1-3/4"
(63.5)
1/8"
(3.2)
7-1/2"
(190.5)
1A
TRANSOM BAR
BUTT HUNG OR OFFSET PIVOT
WITH SINGLE ACTING OFFSET ARM
CONCEALED OVERHEAD CLOSER
2-1/2"
(63.5)
3/4"
(19.0)
7-1/2"
(190.5)
6"
(152.4)
DOOR JAMB
CENTER HUNG
3
TRANSOM BAR
2-1/2"
(63.5)
CENTER HUNG
WITH CONCEALED OVER
HEAD CLOSER
kawneer.com
4
6"
(152.4)
1-3/4"
(63.5)
7-1/2"
(190.5)
2-1/2"
(63.5)
1/8"
(3.2)
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3
2
2-1/2"
(63.5)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
7-1/2"
(190.5)
6"
(152.4)
ADMD060EN
3/4"
(19.0)
13
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
CORNER DETAILS
90° OUTSIDE CORNER
90° INSIDE CORNER
90° OUTSIDE CORNER (RTS)
90° INSIDE CORNER (RTS)
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
14
EC 97911-099
JULY, 2016
SCALE 3" = 1'-0"
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
kawneer.com
1600 SS Curtain Wall System
EC 97911-099
CORNER DETAILS
SCALE 3" = 1'-0"
90° OUTSIDE CORNER
135° OUTSIDE CORNER
90° OUTSIDE SSG CORNER
90° INSIDE SSG CORNER
135° OUTSIDE SSG CORNER
135° INSIDE SSG CORNER
ADMD060EN
15
HEAD
SILL
GLASSventTM WINDOWS FOR CURTAIN WALL/WINDOWS
HEAD
SILL
JAMB
AT CAPTURED MULLION
ADMD060EN
JAMB
AT SSG MULLION
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
JAMB
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
16
EC 97911-099
JULY, 2016
SCALE 3" = 1'-0"
GLASSventTM WINDOWS
FOR CURTAIN WALL
8225TL THERMAL WINDOWS
NOTE: Other vent types can be accommodated. Contact your
Kawneer representative for other options.
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
kawneer.com
2
ELEVATION IS NUMBER KEYED TO DETAILS
1
JAMB MULLION
AT SPANDREL
3/4"
(19.1)
3"
(76.2)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
1600 SS Curtain Wall System
EC 97911-099
BACKPAN DETAILS
SCALE 3" = 1'-0"
3
3
4
5
HEAD
6
4
NOTE: 7-1/2" SYSTEM SHOWN, 6" SYSTEM SIMILAR
EXPANSION JOINT
5
2
TYPICAL DEADLOAD ANCHOR
2-1/2"
(63.5)
MULLION AT SPANDREL
6
TRANSOM – SPANDREL OVER VISION
ADMD060EN
17
1" (25.4) MINIMUM
ANCHORING TO FLOOR SLAB
1" (25.4) MINIMUM
ANCHORING TO SUPPORT STEEL
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
ANCHORING
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
18
EC 97911-099
JULY, 2016
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
kawneer.com
1600 SS Curtain Wall System
EC 97911-099
ANCHORING
Actual project conditions will determine specific anchor design. Details on this page are for reference only.
1" (25.4) MINIMUM
ANCHORING TO HORIZONTAL
STRUCTURAL STEEL
1" (25.4) MINIMUM
ANCHORING TO VERTICAL
STRUCTURAL STEEL
ADMD060EN
19
20
1600 SS Curtain Wall System
WIND LOAD / DEAD LOAD CHARTS
JULY, 2016
EC 97911-099
DEADLOAD CHARTS
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Horizontal or deadload limitations are based upon 1/8" (3.2), maximum allowable deflection at the center of an
intermediate horizontal member. The accompanying charts are calculated for 1" (25.4) thick insulating glass or 1/4" (6.4)
thick glass supported on two setting blocks placed at the loading points shown.
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Mullions are designed for deflection limitations in accordance with AAMA TIR-A11 of L/175 up to 13'-6" and L/240 +1/4"
above 13'-6". These curves are for mullions WITH HORIZONTALS and are based on engineering calculations for stress
and deflection. Allowable wind load stress for ALUMINUM 15,152 psi (104MPa), STEEL 30,000 psi (207MPa). Charted
curves, in all cases are for the limiting value. Wind load charts contained herein are based upon nominal wind load
utilized in allowable stress design. A conversion from Load Resistance Factor Design (LRFD) is provided. To convert
ultimate wind loads to nominal loads, multiply ultimate wind loads by a factor of 0.6 per ASCE/SEI 7. A 4/3 increase in
allowable stress has not been used to develop these curves. For special situations not covered by these curves, contact
your Kawneer representative for additional information.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
WIND LOAD CHARTS
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
WIND LOAD CHARTS (1" INFILL)
SINGLE SPAN
A=
B=
C=
D=
E=
MULLION CENTERS IN METERS
1.0
2.0
20
6.0
18
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4790)
MULLION CENTERS IN METERS
2.0
9.0
29
28
10
3.0
9
B
8
C
D
2.0
E
6
EQUAL
24
23
7.0
A
22
21
20
6.0
19
B
18
17
MULLION HEIGHT IN METERS
A
25
MULLION HEIGHT IN FEET
11
MULLION HEIGHT
12
EQUAL
4.0
13
MULLION HEIGHTT
14
8.0
26
MULLION HEIGHT IN METERS
15
7
5.0
16
C
15
5
D
14
4
1.0
0
1
2
3
4
5
6
7
4.0
13
169001
8
169002
12
I = 5.652 (235.25 x 104)
S = 1.954 (32.02 x 103)
MULLION CENTERS IN FEET
E
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
1.0
2.0
20
18
28
4.0
13
A
12
B
11
C
10
3.0
9
D
E
8
7
2.0
6
9.0
A
8.0
26
25
24
B
23
7.0
22
21
C
20
6.0
19
18
D
17
5.0
16
E
15
5
14
4
1.0
3
2
2.0
27
MULLION HEIGHT IN FEET
14
MULLION HEIGHT
15
MULLION HEIGHT IN METERS
5.0
EQUAL
17
EQUAL
29
MULLION HEIGHT
19
16
1.0
30
6.0
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
kawneer.com
4.0
13
169003
169004
I = 11.512 (479.16 x 104)
S = 3.141 (51.47 x 103)
ADMD060EN
12
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
MULLION HEIGHT IN METERS
3
MULLION HEIGHT IN FEET
1.0
30
5.0
16
2
© Kawneer Company, Inc., 2014
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
27
17
MULLION HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
19
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
21
1600 SS Curtain Wall System
JULY, 2016
WIND LOAD CHARTS (1" INFILL)
1.0
20
2.0
6.0
19
18
TWIN SPAN
LRFD Ultimate
Design Load
33 PSF (1580)
50 PSF (2400)
67 PSF (3200)
83 PSF (4000)
100 PSF (4790)
MULLION CENTERS IN METERS
27
11
10
3.0
9
E
8
D C
7
A
B
EQUAL
2.0
24
23
7.0
22
A
21
B
E
20
6.0
C
19
D
18
17
5.0
16
15
5
14
4
1.0
0
1
2
3
4
5
6
7
4.0
13
169005
8
12
169006
I = 3.609 (150.22 x 104)
S = 1.773 (29.05 x 103)
MULLION CENTERS IN FEET
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
SINGLE SPAN
TWIN SPAN
MULLION CENTERS IN METERS
MULLION CENTERS IN METERS
2.0
1.0
20
18
28
4.0
13
12
A
E
11
B
D C
10
3.0
9
8
7
2.0
6
2.0
9.0
27
A
8.0
26
E
25
MULLION HEIGHT IN FEET
14
MULLION HEIGHT
15
MULLION HEIGHT IN METERS
5.0
EQUAL
17
EQUAL
29
MULLION HEIGHT
19
16
1.0
30
6.0
B
D C
24
23
7.0
22
21
20
6.0
19
18
17
MULLION HEIGHT IN METERS
3
5.0
16
15
5
14
4
1.0
3
2
MULLION HEIGHT IN METERS
12
25
MULLION HEIGHT IN FEET
13
MULLION HEIGHT
4.0
EQUAL
14
MULLION HEIGHT
15
8.0
26
MULLION HEIGHT IN METERS
MULLION HEIGHT IN FEET
9.0
28
5.0
6
MULLION HEIGHT IN FEET
2.0
29
17
16
2
1.0
30
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
4.0
13
169007
169008
I = 8.065 (335.69 x 104)
S = 2.842 (46.57 x 103)
ADMD060EN
12
0
1
2
3
4
5
6
7
8
MULLION CENTERS IN FEET
kawneer.com
© Kawneer Company, Inc., 2014
A=
B=
C=
D=
E=
MULLION CENTERS IN METERS
Allowable Stress
Design Load
20 PSF (960)
30 PSF (1440)
40 PSF (1920)
50 PSF (2400)
60 PSF (2880)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
SINGLE SPAN
EC 97911-099
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
22
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
DEAD LOAD CHARTS
(1/4" INFILL)
(1" INFILL)
SPAN IN METERS
SPAN IN METERS
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
2.0
7
2.0
A
6
5
4
1.0
3
2
169014
8
7
3
4
5
6
7
B
5
4
1.0
3
0
2
2.0
6
A
1
0
1
3.0
9
2
I = 1.620 (67.43 x 104)
S = 1.296 (21.24 x 103)
1
10
8
0
1
SPAN IN FEET
4
5
6
7
8
2.0
SPAN IN METERS
1.0
13
12
12
11
11
10
3.0
9
8
A
7
2.0
6
5
4
1.0
3
2
169017
I = 2.052 (85.41 x 104)
S = 1.642 (26.91 x 103)
1
GLASS HEIGHT IN FEET
13
GLASS HEIGHT IN METERS
GLASS HEIGHT IN FEET
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
3
(1" INFILL)
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
SPAN IN METERS
0
2
SPAN IN FEET
(1/4" INFILL)
1.0
2.0
10
3.0
9
8
B
7
2.0
6
5
4
A
1.0
3
2
1
0
1
2
3
4
5
6
7
0
8
SPAN IN FEET
kawneer.com
GLASS HEIGHT IN METERS
8
GLASS HEIGHT IN FEET
3.0
9
11
GLASS HEIGHT IN METERS
10
2.0
12
B
11
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
12
1.0
13
0
1
2
3
4
5
6
SPAN IN FEET
ADMD060EN
7
8
GLASS HEIGHT IN METERS
1.0
13
0
23
1600 SS Curtain Wall System
JULY, 2016
DEAD LOAD CHARTS
(1/4" INFILL)
(1" INFILL)
SPAN IN METERS
SPAN IN METERS
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
11
3.0
9
8
7
2.0
6
5
B
4
1.0
3
A
2
GLASS HEIGHT IN FEET
12
11
GLASS HEIGHT IN METERS
12
10
169016
I = 0.589 (24.52 x 104)
S = 0.456 (7.47 x 103)
1
0
10
3.0
9
8
7
2.0
6
5
4
1.0
3
2
B
1
A
0
3
4
5
6
7
0
8
1
2
SPAN IN FEET
(1/4" INFILL)
4
5
6
7
8
(1" INFILL)
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
SPAN IN METERS
2.0
1.0
3
SPAN IN FEET
SPAN IN METERS
12
11
11
3.0
9
8
7
2.0
6
5
B
4
1.0
3
A
169019
I = 0.598 (24.89 x 104)
S = 0.470 (7.70 x 103)
GLASS HEIGHT IN FEET
12
GLASS HEIGHT IN METERS
13
10
2.0
1.0
13
10
3.0
9
8
7
2.0
6
5
4
1.0
3
2
B
1
1
A
0
0
2
0
1
2
3
4
5
6
7
0
8
SPAN IN FEET
1
2
3
4
5
6
7
8
SPAN IN FEET
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
2
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
1
GLASS HEIGHT IN METERS
0
GLASS HEIGHT IN FEET
2.0
1.0
13
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
2.0
1.0
13
GLASS HEIGHT IN FEET
EC 97911-099
GLASS HEIGHT IN METERS
24
1600 SS Curtain Wall System
JULY, 2016
DEAD LOAD CHARTS
(1/4" INFILL)
(1" INFILL)
SPAN IN METERS
SPAN IN METERS
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
2.0
1.0
11
3.0
9
8
7
2.0
6
5
B
4
1.0
3
A
2
169015
GLASS HEIGHT IN FEET
12
11
10
I = 0.659 (27.43 x 104)
S = 0.496 (8.13 x 103)
1
10
3.0
9
8
7
2.0
6
5
4
1.0
3
2
B
1
A
0
0
1
2
3
4
5
6
7
0
8
1
5
6
7
8
SPAN IN METERS
12
12
11
11
3.0
9
8
7
2.0
6
5
B
4
1.0
3
A
2
169018
I = 0.671 (27.93 x 104)
S = 0.514 (8.42 x 103)
1
GLASS HEIGHT IN FEET
13
10
2.0
1.0
13
GLASS HEIGHT IN METERS
GLASS HEIGHT IN FEET
4
(1" INFILL)
A = 1/4 POINT LOADING
B = 1/8 POINT LOADING
2.0
1.0
3
SPAN IN FEET
SPAN IN METERS
© Kawneer Company, Inc., 2014
2
SPAN IN FEET
10
3.0
9
8
7
2.0
6
5
4
1.0
3
B
2
A
1
0
0
0
1
2
3
4
5
6
7
0
8
SPAN IN FEET
kawneer.com
1
2
3
4
5
6
SPAN IN FEET
ADMD060EN
7
8
GLASS HEIGHT IN METERS
0
(1/4" INFILL)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
2.0
1.0
13
12
GLASS HEIGHT IN METERS
GLASS HEIGHT IN FEET
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
13
GLASS HEIGHT IN METERS
EC 97911-099
25
1600 SS Curtain Wall System
26
JULY, 2016
THERMAL CHARTS
EC 97911-099
Generic Project Specific U-factor Example Calculation
(Percent of Glass will vary on specific products depending on sitelines)
(Based on single bay of Curtain Wall/Window Wall)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
5'-0"
D.L.O.
Vision Area
Example Glass U-factor
= 0.48 Btu/(ft2 · h · °F)
Vision Area
= 5(9 + 8 + 4) = 105.0 ft2
Total Area (Vision)
= 5' 2-1/2" (9' 3-3/4" + 8' 2-1/2" + 4' 2-1/2") = 113.2 ft2
Percentage of Vision Glass
= (Vision Area ÷ Total Area)100
= (105.0 ÷ 113.2)100 = 93%
Spandrel Area
Example Spandrel R-value
= 15 (ft2 · h · °F)/Btu
Spandrel Area
= 5(6 + 3) = 45.0 ft2
Total Area (Spandrel)
= 5' 2-1/2" (6' 2-1/2" + 3' 3-3/4") = 49.6 ft2
Percent of Spandrel
= (Spandrel Area ÷ Total Area)100
= (49.0 ÷ 49.6)100 = 91%
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
VISION
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
8'-0"
D.L.O.
SPANDREL
31'-3"
VISION
6'-0"
D.L.O.
VISION
2-1/2" Typ.
SPANDREL
9'-0"
D.L.O.
4'-0"
3'-0"
D.L.O. D.L.O.
2-1/2" Typ.
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
27
THERMAL CHARTS
Vision Area Chart
System U-factor vs Percent of Vision Area
0.80
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
T
COG
U-factor
0.53
0.50
0.40
0.30
)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.60
Btu
h·ft 2·°F
System U-factor
O
E IGN
PL S
M E
A D
EX OR
F
(N
0.70
93%
0.20
95
85
90
75
80
70
Vision Area / Total Area (%)
Based on a single curtain wall bay of 93% vision glass and center
of glass U-factor of 0.48, System U-factor is equal to 0.53 Btu/(h·ft 2·°F)
System U-factor vs Percent of Spandrel Area
Spandrel
R-value
E IGN
PL S
M E
A D
EX OR
F
O
0.50
T
3.00
4.00
© Kawneer Company, Inc., 2014
5.00
0.21
0.20
0.10
91%
95
0.30
)
11.00
15.00
19.00
30.00
0.40
Btu
h·ft 2·°F
System U-factor
2.00
0.60
(N
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Spandrel Area Chart
90
85
80
75
70
Spandrel Area / Total Area (%)
Based on a single curtain wall bay of 91% spandrel and center of
spandrel R-value of 15, system U-factor is equal to 0.21 Btu/(h·ft 2·°F)
kawneer.com
ADMD060EN
1600 SS Curtain Wall System
JULY, 2016
THERMAL CHARTS (CAPTURED)
EC 97911-099
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
System U-Factor for Vision Glass
0.90
(5.00)
0.80
0.70
(4.50)
(4.00)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.55
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
0.50
0.45
(3.50)
2
Btu
h·ft 2·°F
0.60
COG
U-factor
( m W·°C )
0.65
System U-Factor
0.75
(3.00)
(2.50)
0.40
0.35
(2.00)
0.30
0.25
(1.50)
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.85
0.20
85
80
Vision Area / Total Area (%)
75
70
System U-Factors for Spandrel Glass
0.70
(4.00)
0.65
0.60
(3.50)
0.55
3.00 (0.53)
0.35
4.00 (0.70)
0.30
5.00 (0.88)
0.25
System U-Factor
0.40
(2.50)
2
0.45
2.00 (0.35)
(3.00)
( m W·°C )
0.50
Spandrel
R-Value
(2.00)
(1.50)
0.20
(2.00)
11.00 (1.94)
0.15
15.00 (2.64)
0.10
19.00 (3.34)
(1.50)
30.00 (5.28)
0.05
95
90
85
80
75
70
Spandrel Area / Total Area (%)
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
90
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
95
Btu
h·ft 2·°F
28
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
THERMAL CHARTS (CAPTURED)
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
29
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.10
95
90
80
85
75
70
Vision Area / Total Area (%)
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
0.90
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.10
95
90
80
85
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
kawneer.com
ADMD060EN
75
70
System VT
0.60
0.60
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Charts are generated per AAMA 507.
1600 SS Curtain Wall System
JULY, 2016
THERMAL PERFORMANCE MATRIX (NFRC SIZE) - (CAPTURED)
0.48
0.62
0.46
0.60
0.44
0.59
0.42
0.57
0.40
0.55
0.38
0.54
0.36
0.52
0.34
0.50
0.32
0.49
0.30
0.47
0.28
0.46
0.26
0.44
0.24
0.42
0.22
0.41
0.20
0.39
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.90
0.82
0.90
0.81
0.85
0.78
0.85
0.76
0.80
0.73
0.80
0.72
0.75
0.69
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.60
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.51
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.42
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.33
0.35
0.31
0.30
0.29
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.20
0.20
0.18
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Overall U-Factor 4
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Glass U-Factor 3
EC 97911-099
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
30
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
31
THERMAL CHARTS (SSG)
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
System U-Factor for Vision Glass
0.90
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
0.85
(5.00)
0.80
0.70
(4.50)
(4.00)
0.48
0.46
0.44
0.42
0.40
0.38
0.36
0.34
0.32
0.30
0.28
0.26
0.24
0.22
0.20
0.55
(2.73)
(2.61)
(2.50)
(2.39)
(2.27)
(2.16)
(2.05)
(1.93)
(1.82)
(1.71)
(1.59)
(1.48)
(1.37)
(1.25)
(1.14)
0.50
0.45
(3.50)
2
Btu
h·ft 2·°F
0.60
COG
U-factor
( m W·°C )
0.65
System U-Factor
0.75
(3.00)
(2.50)
0.40
0.35
(2.00)
0.30
0.25
(1.50)
0.20
90
85
80
Vision Area / Total Area (%)
75
70
System U-Factors for Spandrel Glass
0.70
(4.00)
0.65
0.60
(3.50)
0.55
0.40
0.35
3.00 (0.53)
(2.50)
(2.00)
0.30
4.00 (0.70)
0.25
5.00 (0.88)
(1.50)
0.20
(2.00)
11.00 (1.94)
0.15
15.00 (2.64)
19.00 (3.34)
0.10
30.00 (5.28)
95
0.05
90
85
80
Spandrel Area / Total Area (%)
kawneer.com
ADMD060EN
75
70
System U-Factor
2.00 (0.35)
2
Btu
h·ft 2·°F
0.45
(3.00)
( m W·°C )
0.50
Spandrel
R-Value
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
95
(1.50)
1600 SS Curtain Wall System
JULY, 2016
THERMAL CHARTS (SSG)
EC 97911-099
0.90
0.85
0.85
0.80
0.80
0.75
0.75
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
System SHGC
0.90
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
COG
SHGC
0.15
0.10
95
90
80
85
75
70
Vision Area / Total Area (%)
Charts are generated per AAMA 507.
0.90
0.85
0.85
0.80
0.80
0.75
0.75
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.90
0.70
0.70
0.65
0.65
0.60
0.60
0.55
0.55
0.50
0.50
0.45
0.45
0.40
0.40
0.35
0.35
0.30
0.30
0.25
0.25
0.20
0.20
0.15
0.10
95
90
80
85
75
70
Vision Ares / Total Area (%)
Charts are generated per AAMA 507.
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
System Visible Transmittance (VT) vs Percent of Vision Area
COG
VT
System VT
32
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
THERMAL PERFORMANCE MATRIX (NFRC SIZE) - (SSG)
1" GLAZING WITH
ALUMINUM PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.56
0.46
0.54
0.44
0.53
0.42
0.51
0.40
0.49
0.38
0.48
0.36
0.46
0.34
0.44
0.32
0.42
0.30
0.41
0.28
0.39
0.26
0.37
0.24
0.36
0.22
0.34
0.20
0.32
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
SHGC Matrix 2
kawneer.com
33
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.90
0.87
0.90
0.81
0.85
0.82
0.85
0.77
0.80
0.77
0.80
0.72
0.75
0.73
0.75
0.68
0.70
0.68
0.70
0.63
0.65
0.64
0.65
0.59
0.60
0.59
0.60
0.54
0.55
0.55
0.55
0.50
0.50
0.50
0.50
0.45
0.45
0.46
0.45
0.41
0.40
0.41
0.40
0.36
0.35
0.37
0.35
0.32
0.30
0.32
0.30
0.27
0.25
0.28
0.25
0.23
0.20
0.23
0.20
0.18
ADMD060EN
1600 SS Curtain Wall System
34
THERMAL CHARTS (CAPTURED - FIBERGLASS PRESSURE PLATE)
JULY, 2016
EC 97911-099
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
COG
U-factor
0.48 (2.72)
0.46 (2.61)
0.44 (2.50)
0.42 (2.39)
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
System U-Factor (Btu/h·ft2·°F)
Vision Area / Total Area (%)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
EC 97911-099
0.45
0.40
0.35
kawneer.com
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
1600 SS Curtain Wall System
0.30
0.25
0.20
0.15
0.10
0.05
Charts are generated per AAMA 507.
ADMD060EN
35
THERMAL CHARTS (CAPTURED - FIBERGLASS PRESSURE PLATE)
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Vision Area / Total Area (%)
COG
SHGC
0.75
0.70
0.65
0.60
0.55
0.50
0.30
0.25
0.20
0.15
0.10
0.05
Charts are generated per AAMA 507.
THERMAL CHARTS (CAPTURED - FIBERGLASS PRESSURE PLATE)
System Visible Transmittance (VT) vs Percent of Vision Area
Vision Ares / Total Area (%)
COG
VT
0.75
0.70
0.65
0.60
0.55
0.50
0.40
0.35
ADMD060EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.45
System VT
36
EC 97911-099
JULY, 2016
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
CAPTURED - FIBERGLASS PRESSURE PLATE
1" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.56
0.46
0.54
0.44
0.52
0.42
0.51
0.40
0.49
0.38
0.47
0.36
0.46
0.34
0.44
0.32
0.43
0.30
0.41
0.28
0.39
0.26
0.38
0.24
0.36
0.22
0.34
0.20
0.33
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
37
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.68
0.75
0.67
0.70
0.64
0.70
0.63
0.65
0.59
0.65
0.58
0.60
0.55
0.60
0.54
0.55
0.50
0.55
0.49
0.50
0.46
0.50
0.45
0.45
0.41
0.45
0.40
0.40
0.37
0.40
0.36
0.35
0.33
0.35
0.31
0.30
0.28
0.30
0.27
0.25
0.24
0.25
0.22
0.20
0.19
0.20
0.18
0.15
0.15
0.15
0.13
0.10
0.10
0.10
0.09
0.05
0.06
0.05
0.04
ADMD060EN
1600 SS Curtain Wall System
38
THERMAL CHARTS (SSG - FIBERGLASS PRESSURE PLATE)
JULY, 2016
EC 97911-099
Note:
Values in parentheses are metric.
COG=Center of Glass.
Charts are generated per AAMA 507.
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
COG
U-factor
0.48 (2.72)
0.46 (2.61)
0.44 (2.50)
0.42 (2.39)
0.40 (2.27)
0.38 (2.16)
0.36 (2.05)
0.34 (1.93)
0.32 (1.82)
0.30 (1.71)
0.28 (1.59)
0.26 (1.48)
0.24 (1.37)
0.22 (1.25)
0.20 (1.14)
Notes for System U-Factor, SHGC and VT charts:
For glass values that are not listed, linear interpolation is permitted.
Glass properties are based on center of glass values (winter conditions) and are obtained
from your glass supplier.
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
System U-Factor (Btu/h·ft2·°F)
Vision Area / Total Area (%)
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
System U-Factor for Vision Glass
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
EC 97911-099
COG
SHGC
0.40
0.35
0.30
kawneer.com
System SHGC
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
JULY, 2016
1600 SS Curtain Wall System
0.25
0.20
0.15
0.10
0.05
Charts are generated per AAMA 507.
ADMD060EN
39
THERMAL CHARTS (SSG - FIBERGLASS PRESSURE PLATE)
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
System Solar Heat Gain Coefficient (SHGC) vs Percent of Vision Area
Vision Area / Total Area (%)
0.75
0.70
0.65
0.60
0.55
0.50
0.45
0.30
0.25
0.20
0.15
0.10
0.05
Charts are generated per AAMA 507.
THERMAL CHARTS (SSG - FIBERGLASS PRESSURE PLATE)
System Visible Transmittance (VT) vs Percent of Vision Area
Vision Ares / Total Area (%)
COG
VT
0.75
0.70
0.65
0.60
0.55
0.50
0.40
0.35
ADMD060EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
0.45
System VT
40
EC 97911-099
JULY, 2016
1" GLAZING WITH FIBERGLASS PRESSURE PLATE
1600 SS Curtain Wall System
JULY, 2016
EC 97911-099
THERMAL PERFORMANCE MATRIX (NFRC SIZE)
SSG - FIBERGLASS PRESSURE PLATE
1" GLAZING WITH
FIBERGLASS PRESSURE PLATE
Thermal Transmittance 1 (BTU/hr • ft 2 • °F)
Overall U-Factor 4
0.48
0.54
0.46
0.53
0.44
0.51
0.42
0.49
0.40
0.48
0.38
0.46
0.36
0.44
0.34
0.42
0.32
0.41
0.30
0.39
0.28
0.37
0.26
0.36
0.24
0.34
0.22
0.32
0.20
0.31
NOTE:For glass values that are not listed, linear
interpolation is permitted.
1.
2.
3.
4.
SHGC Matrix 2
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
Glass U-Factor 3
kawneer.com
41
U-Factors are determined in accordance with NFRC 100.
SHGC and VT values are determined in accordance with
NFRC 200.
Glass properties are based on center of glass values and
are obtained from your glass supplier.
Overall U-Factor, SHGC, and VT Matricies are based on
the standard NFRC specimen size of 2000mm wide by
2000mm high (78-3/4" by 78-3/4").
Visible Transmittance 2
Glass SHGC 3
Overall SHGC 4
Glass VT 3
Overall VT 4
0.75
0.73
0.75
0.68
0.70
0.69
0.70
0.63
0.65
0.64
0.65
0.59
0.60
0.60
0.60
0.54
0.55
0.55
0.55
0.50
0.50
0.51
0.50
0.45
0.45
0.46
0.45
0.41
0.40
0.42
0.40
0.36
0.35
0.37
0.35
0.32
0.30
0.33
0.30
0.27
0.25
0.28
0.25
0.23
0.20
0.24
0.20
0.18
0.15
0.19
0.15
0.14
0.10
0.15
0.10
0.09
0.05
0.10
0.05
0.05
ADMD060EN
Laws and building and safety codes governing the design and use of glazed
entrance, window, and curtain wall products vary widely. Kawneer does not control
the selection of product configurations, operating hardware, or glazing materials,
and assumes no responsibility therefor.
1600 SS Curtain Wall System
BLANK PAGE
ADMD060EN
kawneer.com
© Kawneer Company, Inc., 2014
Kawneer reserves the right to change configuration without prior notice when deemed
necessary for product improvement.
42
EC 97911-099
JULY, 2016