Jn125 non-pressurised Fast Fuel Systems

Transcription

Cooper Fluid Systems offers an extensive range of quality products
and systems for hydraulic, lubrication and fluid handling applications
JN125 Non-Pressurised Fast Fuel Systems
Deisgned for use on vehicles which do not have fuel tanks capable of holding pressure, the JN125
allows operators to use the Wiggins Fast Fuel system on all diesel powered equipment including
vehicles, pumps, lights and generators.
Features and Benefits Include:
• Fuel at rates of more than 400L per minute.
• Does not require tank pressure for fast fuel automatic shut-off.
• Allow for use of the Wiggins Fast Fuel Nozzle on vehicles with thin wall or plastic fuel tanks.
• Provides more positive full tank shut-off; prevents tank overfill.
• Eliminates stressing and cracking of tanks associated with pressurised systems.
• Does not require modification to tank in replacement of standard Wiggins installation.
• Robust and rugged; designed and tested in the most extreme mining applications.
• Works with ZZ9A1 Nozzle.
• Intank and remote fill units available.
Specifications:
Fuel Delivery Rate.........................................152 to 475 LPM
Operating Pressure....................................................125 psig
Proof Pressure...........................................................250 psig
Burst Pressure...........................................................500 psig
Material...................................................................Aluminium
Operating Fluid..............................................................Diesel
Mating Nozzle.................................................Wiggins ZZ9A1
JN125
Non-Pressurised Fast Fuel Nozzle
PERTH OFFICE
Tel (08) 6272 5333
Fax (08) 6272 5350
KALGOORLIE OFFICE
Tel (08) 9021 4000
Fax (08) 9021 3999
ADELAIDE OFFICE
Tel (08) 8346 2705
Fax (08) 8346 7443
BRISBANE OFFICE
Tel (07) 3258 7222
Fax (07) 3258 7200
TOOWOOMBA OFFICE
Mobile 0417 930 591
GLADSTONE OFFICE
Workshop 0400 203 400
Sales 0410 220 919
MACKAY OFFICE
Tel (07) 4952 4844
Fax (07) 4952 4011
TOWNSVILLE OFFICE
Tel (07) 4774 3455
Fax (07) 4774 4902
AUSTRALIA’S HYDRAULIC AND LUBRICATION SPECIALISTS
www.cooperfluidsytems.com.au
A Division of Coventry Group Ltd ABN 37 008 670 102
Specifications
Specifications
JN125
Intank
Flange Mount Receiver
to accept ZZ9A1
JN125T
º
º
º
º
Intank
2” NPT Mount Receiver
to accept ZZ9A1
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
CHG CHK RELEASE
CHG CHK
RELEASE
BY BYBY BY E05
-0420REV
E05-0420REV
JN125RM
1/4"FLARED
37º FLARED
FITTING
1/4" 37º
FITTING
FITTING
1/2"FLARED
37º FLARED
1/2" 37º
FITTING
(2 X)30° )
(2 X 30°
JIC END
2" JIC2"END
Intank
Flange Mount Receiver
with a -32 JIC Connector
( O 5.312
)
( O 5.312
)
(4X) 60° )
(4X 60°
(6X.312
)
(6X .312
)
( O 4.500
)
( O 4.500
)
5.31 5.31
.325 .325
REVISIONS
CHG CHK R
BY BY
DESCRIPTION
RELEASE
REV
CHG CHK
BY BY
O 6.00
O 6.00
9.79 9.79
JN125RMT
Intank
2” NPT Mount Receiver
with -32 JIC Connector
( O 3.50)
( O 3.50)
2 BE
TOUSED
BE USED
IN NCTION
NSWIGGI
PNS:
JN
2A, VR306
AND
Z
TO
CONJU
IN CONJU
NCTION
WITHWITH
ADEL
NADEL
SWIGGI
PNS:
C
JN
2A, C
VR306
AND
Z9A1
Z Z9A1
1 FOR
DESIGN
RATING
PURPOSES:
OPERATING
PRESSURE:
R
OOFPRESSURE:
60
PSIG,
120PPSIG,
FOR
DESIGN
RATING
PURPOSES:
OPERATING
PRESSURE:
ROOF
PRESSURE:
60 PSIG,
120
PPSIG,
T PRESSURE:
240 PSIG
BURS
TBURS
PRESSURE:
240 PSIG
THIS DRAWING
IS PROTECTED
COPYRIGHT
LAW AND
THIS DRAWING
IS PROTECTED
UNDERUNDER
COPYRIGHT
LAW AND
THE PROPERTY
OFWIGGINS
ADEL WIGGINS
GROUP,
TRANSDIGM
IS THEIS
PROPERTY
OF ADEL
GROUP,
TRANSDIGM
INC.CONTAINED
DATA CONTAINED
HEREIN
IS PROPRIETARY
TO ADEL
INC. DATA
HEREIN
IS PROPRIETARY
TO ADEL
WIGGINS
GROUP,
TRANSDIGM
INC.DRAWING
THIS DRAWING
AND/OR
WIGGINS
GROUP,
TRANSDIGM
INC. THIS
AND/OR
ANYOF
PART
THECONTAINED
DATA CONTAINED
HEREIN
MAY
ANY PART
THEOF
DATA
HEREIN
MAY NOT
BENOT BE
COPIED,
DUPLICATED
OR RELEASED
FOR MANUFACTURING
COPIED,
DUPLICATED
OR RELEASED
FOR MANUFACTURING
OROF
SALE
OF EQUIPMENT
OUTSIDE
OFWIGGINS
ADEL WIGGINS
GROUP,
OR SALE
EQUIPMENT
OUTSIDE
OF ADEL
GROUP,
TRANSDIGM
INC.
OR AFFILIATES
WITHOUT
THE WRITTEN
TRANSDIGM
INC. OR
AFFILIATES
WITHOUT
THE WRITTEN
CONSENT
OFWIGGINS
ADEL WIGGINS
GROUP,
TRANSDIGM
CONSENT
OF ADEL
GROUP,
TRANSDIGM
INC. INC.
NOTES:
UNLESS
OTHERWISE
IED
SPECIF
NOTES:
UNLESS
OTHERWISE
IED
SPECIF
3.250 HEX
.500" FLARED 37º FITTING
2
1
UNLESS OTHERWISE SPECIFIED
DRAWN
DIMENSIONS ARE IN INCHES
.250" FLARED
37º
FITTING
TOLERANCES ON:
TOLERANCES ON:
CHECK
ANGLES ± 2°
MFG ENGR
ANGLES ± 2°
DECIMALS .XX ± .03
DECIMALS .XX ± .03
DECIMALS .XXX ± .010
QUALITY
DRAWN J.CORTEZ
/18RANS
J.
CORTEZ 02/11/1802/11T
TRANS
CHECK
gmD gm 37º
LOS AN
T. ROSE
FLARED
FITT
LOS ANGELES
T. ROSE
02-11-2.250"
2 02-11-22D
MFG ENGR
TITLE
N. NG
UYEN
TITLE25
N. NG
UYEN
02-11-25 02-11QUALITY
G. MEDINA
G. MEDINA
02-11-23 02-11-23
RECEI
VER,
2.000
NEXT ASSY 125
NEXT ASSY
REV. 12/95
REV. 12/95
INC
INC
RECEI
VER, RE
2.00 NPT FULL
COUPLING
2.00
F. CHING
26 D 79326
02-11-26 02-11125
SURFACE INTERPRET DWG F. CHING
D 79326
SURFACE INTERPRET DWG
PER MIL-STD-100
FINISH
INTERPRET SPC FLAGS IN ACCORDANCE
WITH ADEL WIGGINS GSP 569
ALL FILLETS, CORNERS AND
APPROVED
EDGES R.018/.005
APPROVED
EDGES R.018/.005
FINISH
PER MIL-STD-100
SIZE
SIZE FSCM NO
FSCM NO
SCALE
SCALE 2 / 1
WT
2 / 1 EST
CUSTOMER OR GOVT INSP APPROVAL
DWG NO
EST WT
J
JN1
DWG NO
2.76
2.76
3.250 HEX
2.00" JIC END
2.00" JIC END
9.78
9.78
2.00 NPT THREAD
FIND
NO
QTY
REQD
PART OR
IDENTIFYING NO
NOMENCLATURE
OR
DESCRIPTION
FIND QTY MATERIAL PART OR MATERIAL
REQD
NO
IDENTIFYING SPEC
NO
PARTS LIST
2
1
THIS DRAWING IS PROTECTED UNDER COPYRIGHT LAW AND J. CORTEZ
CHECK
T. ROSE
IS THE PROPERTY OF ADEL WIGGINS
GROUP,ON:
TRANSDIGM
TOLERANCES
MFG ENGR N. NG
INC. DATA CONTAINED HEREIN ISANGLES
PROPRIETARY
TO ADEL
± 2°
UYEN
DECIMALS
.XX ± .03
WIGGINS GROUP, TRANSDIGM INC.
THIS DRAWING
AND/OR
QUALITY R. WEISER
DECIMALS
.XXXMAY
± .010NOT BE
ANY PART OF THE DATA CONTAINED HEREIN MAY NOT BE
ANY PART OF THE DATA CONTAINED
HEREIN
INTERPRET SPC FOR
FLAGS IN
ACCORDANCE
COPIED, DUPLICATED OR RELEASED FOR MANUFACTURING COPIED, DUPLICATED OR RELEASED
MANUFACTURING
OR SALE OF EQUIPMENT OUTSIDE OF ADEL WIGGINS GROUP, OR SALE OF EQUIPMENT OUTSIDE OF ADEL WIGGINS GROUP,
TRANSDIGM INC. OR AFFILIATES WITHOUT THE WRITTEN
TRANSDIGM INC. OR AFFILIATES
WITHOUT THE WRITTEN
APPROVED
EDGES R.018/.005
CONSENT OF ADEL WIGGINS GROUP, TRANSDIGM INC.
F. CHING
2 C
THIS DRAWING IS PROTECTED UNDER COPYRIGHT LAW AND
TO VR306
BE USED
CONJU
INZ NCTION WITH ADEL
NSWIGGI
PNS: C
JN
2A, VR306 AND
Z9A1
Z
TO BE USED
CONJU
IN NCTION WITH ADEL
NSWIGGI
PNS:
JN
2A,
AND
Z9A1
IS 120
THE P
PROPERTY
1 FORPRESSURE:
RATING
PURPOSES:
OPERATING PRESSURE:
ROOFPRESSURE:
60 PSIG,
PSIG, OF ADEL WIGGINS GROUP, TRANSDIGM
FOR DESIGN RATING PURPOSES: OPERATING
RDESIGN
OOFPRESSURE:
60 PSIG,
120
PPSIG,
INC. DATA CONTAINED HEREIN IS PROPRIETARY TO ADEL
BURS
T PRESSURE: 240 PSIG
BURS
WIGGINS GROUP, TRANSDIGM INC. THIS DRAWING AND/OR
NOTES:UNLESS OTHERWISEIED
SPECIF
SPECIF
REV. 12/95
REV. 12/95
NEXT ASSY
125
SURFACE
FINISH
INTERPRET DWG
PER MIL-STD-100
DRAWN
03-03-03
03-03-04
03-03-04
03-03-04
NOMENC
FINIS
DESCR
TRANS
D gm
DRAW
INC
LOS ANGELES,CHECK
CA
TOLERANCES ON:
TITLE
ANGLES ± 2°
DECIMALS .XX ± .03
MFG ENG
REMOTE TH
RECEI
VER A
JN12
79326
QUALIT
SIZE
03-03-04 D
ASSY
NEXT
SCALE
DWG NO
EDGES R.018/.005
FSCM NO
125
1/1
SURFACE
FINISH
EST WT
INTERPRET DWG
PER MIL-STD-100
APPRO
CUSTO
Specifications
Specifications
REVISIONS
REVISIONS
DESCRIPTION
DESCRIPTION
CHG CHK RELEASE
CHGBY
CHK BYRELEASE REV
E05-0118
BY BY
REV
E05-0118
JN125FR
.500" FLARED 37º
.500" FLARED
37º
FITTING
FITTING
Retrofit Unit
to fit ZNC3 & ZNC4
housings / ZZ9A1
( O 3.50 )
( O 3.50 )
OVED
DATE APPR
OVED
DATE APPR
10.85
10.85
5.92
5.92
2.76
2.76
3.250 HEX
3.250 HEX
4.52
4.52
O 3.10
O 3.10
2.00 NPT THREAD
2.00 NPT THREAD
4.94
4.94
ZNC4 OR ZNC3 STYLE
ZNC4
OR ZNC3FLANGE
STYLE
RECESSED
RECESSED FLANGE
JNC2A
FIND QTY
FIND NOQTYREQD
REQD
NO
Remote Connection
for the JN125RM / RMT
2 TO BE USED
CONJU
IN NCTION WITH ADEL
NSWIGGI
PNS: C
JN
2A, VR306 AND
Z9A1
Z
2 1TOFOR
BE USED
CONJU
IN RATING
NCTION PURPOSES:
WITH ADEL
NSWIGGI
PNS: C
JN
2A, VR306
AND
Z9A1
Z 60 PSIG,
DESIGN
OPERATING
PRESSURE:
ROOF
PRESSURE:
120PPSIG,
1 FOR
DESIGN
RATING240
PURPOSES:
OPERATING PRESSURE:
ROOFPRESSURE:
60 PSIG,
120PPSIG,
BURS
T PRESSURE:
PSIG
BURS
SPECIF
SPECIF
VR306
Standard Level Jet Sensor
same as VR300 System
ZV13NFB
Breather
THISISDRAWING
IS PROTECTED
COPYRIGHT
LAW AND
THE PROPERTY
OF ADELUNDER
WIGGINS
GROUP, TRANSDIGM
IS THE
OF ADELHEREIN
WIGGINS
GROUP, TRANSDIGM
INC.PROPERTY
DATA CONTAINED
IS PROPRIETARY
TO ADEL
INC.WIGGINS
DATA CONTAINED
HEREIN IS PROPRIETARY
TO ADEL
GROUP, TRANSDIGM
INC. THIS DRAWING
AND/OR
WIGGINS
GROUP,
TRANSDIGM
INC. THIS DRAWING
AND/OR
ANY PART
OF THE
DATA CONTAINED
HEREIN MAY
NOT BE
ANYCOPIED,
PART OFDUPLICATED
THE DATA CONTAINED
HEREIN
NOT BE
OR RELEASED
FOR MAY
MANUFACTURING
COPIED,
DUPLICATED
OR RELEASED
MANUFACTURING
OR SALE
OF EQUIPMENT
OUTSIDEFOR
OF ADEL
WIGGINS GROUP,
OR SALE
OF EQUIPMENT
OUTSIDE OF
ADEL WIGGINS
GROUP,
TRANSDIGM
INC. OR AFFILIATES
WITHOUT
THE WRITTEN
TRANSDIGM
AFFILIATES
THE WRITTEN
CONSENTINC.
OF OR
ADEL
WIGGINS WITHOUT
GROUP, TRANSDIGM
INC.
CONSENT
OF
ADEL
WIGGINS
GROUP,
TRANSDIGM
INC.
REV. 12/95
REV. 12/95
PART OR
IDENTIFYING
NO
PART
OR
IDENTIFYING NO
NOMENCLATURE
OR
DESCRIPTION
NOMENCLATURE
OR
DESCRIPTION
T
T gm
D
D
CHECK
TOLERANCES
ON:
DIMENSIONS
ARE IN INCHES
CHECK J.KIM
MFG ENGR N. NGUY
ANGLES ± 2°
02-04-25 TITLE
EN 02-04-23
TOLERANCES
ON:
DECIMALS
.XX ± .03
MFG ENGR N. NGUY
ANGLES
± 2°
TITLE
QUALITY G. EN
MEDINA 02-04-25
02-04-24
DECIMALS
DECIMALS
.XX ±.XXX
.03 ± .010
QUALITY G. MEDINA
02-04-24
ADEL IN
WIGGINS
GSP 569
INTERPRETWITH
SPC FLAGS
ACCORDANCE
WITH ADEL
WIGGINS
GSP 569 AND
ALL FILLETS,
CORNERS
EDGES
R.018/.005
ALL FILLETS,
CORNERS
AND
NEXT ASSY
NEXT ASSY
125
APPROVED
F. CHING
F. CHING
02-04-26
SIZE
02-04-26
APPROVED
R.018/.005
125 EDGES
SURFACE INTERPRET DWG CUSTOMER OR GOVT INSP APPROVAL
PER MIL-STD-100
FINISH INTERPRET
SURFACE
DWG
FINISH
PER MIL-STD-100
MATERIAL
SPEC
MATERIAL
SPEC
MATERIAL
MATERIAL
PARTS LIST
PARTS LIST02-03-26
J. CORTEZ
RANS
J. CORTEZ
02-03-26
J.KIM
02-04-23 RANS gm
DRAWN
UNLESS
OTHERWISEARE
SPECIFIED
DIMENSIONS
IN INCHES DRAWN
SIZE
RECEI
VER, FIELD RETRO
RECEI
VER, FIELD RETROFI
ASSEMBLY
ASSEMBLY
FSCM NO
D 79326
FSCM NO
D 79326
1/1
SCALE
SCALE
FINISH
SPEC
FINISH
SPEC
FINISH
FINISH
LOS ANGELES, CA 90022
INC
INC
1/1
A
JN125FR
JN125FR
1 OFA 1
1 OF 1
REV
DWG NO
DWG NO
EST WT
EST WT
REV
SHEET
SHEET
Specifications
Specifications
JV125
JV125L
Short Level Jet Sensor
with vent
JV125NS
A
Long Level Jet Sensor
with vent
CHG CHK
BY
BY
IDENT WITH WHITE
(O 3.66 ) INK AS SHOWN
PERMANENT
A
Jet Sensor Non-Spill
with vent
REVISIONS
DESCRIPTION
RELEASE
CHG CHK
BY BY
RELEASE
REV REVISIONS
DESCRIPTION
XXX-XXXX REV
DATE
APPROVED
APPROVED
DATE
SECTION B-B
4.58
"JV125"
2
DATE CODE "_ _ _ _ _"
(PER ADEL WIGGINS WSIP-2)
C
JV125 ASSEMBLY
4.87
4.301
END PER SAE J1926/1-4
FITTING END
PER SAE J1926/1-4
4.87
FITTIND END
PER SAE J1926/1-8
B
B
9.736
13.05
10.09
5.50
2.000 - 11.5 NPT THREAD
2.58
1.500
2.985
CHG CHK
BY BY
REVISIONS
DESCRIPTION
RELEASE
REV
IDENT WITH WHITE
PERMANENT INK AS SHOWN
DATE
APPROVED
FUEL SHUT
OFF LEVEL
SECTION A-A
.159
C
"JV125"
2
FUEL SHUTOFF
LEVEL
DATE CODE "_ _ _ _ _"
(PER ADEL WIGGINS WSIP-2)
CHG CHK
BY
BY
O 1.250
(O 3.66 )
REVISIONS THIS DRAWIN
IS THE PROPD
DESCRIPTION
INC. DATA CO
WIGGINS GR
ANY PART O
COPIED, DUP
OR SALE OF
TRANSDIGM
CONSENT OF
RELEASE
XXX-XXXX REV
4.58
JV125 ASSEMBLY
SPECIF
FIND
NO
PART OR
IDENTIFYING NO
QTY
REQD
NOMENCLATURE
OR
DESCRIPTION
MATERIAL
SPEC
MATERIAL
REV. 12/95
FINISH
SPEC
FINISH
PARTS LIST
J. CORTEZ 03/04/10 TRANS
X. XXXXXX YY/MM/DD D gm
MFG ENGR
TITLE
X. XXXXXX
YY/MM/DD
END PER
SAE
J1926/1-8
QUALITY
X. XXXXXX YY/MM/DD
IS THE PROPERTY OF ADEL WIGGINS GROUP, TRANSDIGM
COPIED, DUPLICATED OR RELEASED FOR MANUFACTURING
OR SALE OF EQUIPMENT OUTSIDE OF ADEL WIGGINS GROUP,
TOLERANCES ON:
ANGLES ± 2°
DECIMALS .XX ± .03
DRAWN
CHECK
INC
INTEGRATE JETVENT ASSY
LONG
EDGES R.018/.005
4.87
125
NEXT ASSY
REV. 12/95
SURFACE
FINISH
INTERPRET DWG
PER MIL-STD-100
APPROVED
SIZE
FSCM NO
SCALE
1/1
D 79326
DWG NO
EST WT
ENVELOPE
NC DRAWING
JV125L
SK
1 OF 1
REV
SHEET
FITTING END
PER SAE J1926/1-4
FIND
NO
PART OR
IDENTIFYING NO
QTY
REQD
NOMENCLATURE OR
DESCRIPTION
PARTS LIST
3 UNIT SHALL BE USED IN NON-PRESSURIZED WIGGINS SERVICE SYSTEM ONLY
2.000 - 11.5 NPT THREAD
2 DATE CODE
COMPROMISED OF MONTH/YEAR;
EXAMPLE JANUARY 2003, "01/03"
1 OPERATING TEMPERATURE RANGE:
-30ºF TO + 220ºF
NOTES:
10.09
TOLERANCES ON:
ANGLES ± 2°
DECIMALS .XX ± .03
13.05
C. QUANG
DRAWN
CHECK
08-09-25
TRANS
D gm
INC
MFG ENGR
TITLE
QUALITY
EDGES R.018/.005
SURFACE
FINISH
NEXT ASSY
REV. 12/95
INTERPRET DWG
PER MIL-STD-100
MATERIAL
SPEC
MATERIAL
APPROVED
FITTIND END
PER SAE J1926/1-8
A
A
FINISH
SPEC
FINISH
INTEGRATED JET-VENT
ASSEMBLY, ENVELOPE DWG
SIZE
FSCM NO
SCALE
1/1
D 79326
EST WT
DWG NO
JV125-ENV
1 OF
SHEET
REV
5.50
B
1
SECTI
C
4.301
How It Works...
WIGGINS SERVICE SYSTEM ONLY
PLE
R; JANUARY 2003, "01/03"
ºF
FIND
NO
QTY
REQD
TOLERANCES ON:
ANGLES ± 2°
DECIMALS .XX ± .03
DRAWN
PARTS LIST
C. QUANG
CHECK
MFG ENGR
08-09-25
TRANS
D gm
INC
TITLE
QUALITY
EDGES R.018/.005
NEXT ASSY
SURFACE
FINISH
INTERPRET DWG
PER MIL-STD-100
MATERIAL
SPEC
MATERIAL
APPROVED
QTY
REQD
PART OR
IDENTIFYING NO
NOMENCLATURE
OR
DESCRIPTION
FINISH
SPEC
FINISH
FIND
NO
MATERIAL
SPEC
MATERIAL
FINISH
PARTS LIST
ENVELOPE DRAWING
NOMENCLATURE OR
DESCRIPTION
REV. 12/95
PART OR
IDENTIFYING NO
FUEL SHUT
OFF LEVEL
REV. 12/95
B
TOLERANCES ON:
ANGLES ± 2°
DECIMALS .XX ± .03
B
J. CORTEZ
X. XXXXXX
MFG ENGR
X. XXXXXX
QUALITY
X. XXXXXX
DRAWN
CHECK
03/04/10 TRANS
YY/MM/DD D gm
TITLE
YY/MM/DD
YY/MM/DD
INC
INTEGRATE JETVEN
LONG
EDGES R.018/.005
NEXT ASSY
125
SURFACE
FINISH
INTERPRET DWG
PER MIL-STD-100
APPROVED
LOS ANGELES, CA 900
SIZE
FSCM NO
SCALE
1/1
D 79326
EST WT
DWG NO
JV125L
SH
9.736
INTEGRATED JET-VENT
ASSEMBLY, ENVELOPE DWG
SIZE
FSCM NO
SCALE
1/1
D 79326
EST WT
DWG NO
JV125-ENV
1 OF
SHEET
REV
B
1
1.500
2.985
C
.159
O 1.250
SPECIF
SECTION

Jn125 non-pressurised Fast Fuel Systems

Transcription

Similar documents

Landscape Plan

Forecast - Adel Adviser

Forecast - Adel Adviser

2016-09 Newsletter

Page 01c - The Seabreeze News

Wiggins 2012

Read more - Altermann Galleries

HOBART HIGH SCHOOL

T:\Working Site Plans\_Malls Site\Imperial Valley SP arch.dwg, 3/28

The Wiggins View

Feb BPN 06 12 pgs doc.

Rocker Bank Air Eliminator Head for the Air Eliminator Model T2A

April - Iowa Living Magazines