the sailing boat that fits in your car

Transcription

the sailing boat that fits in your car
T U
A
O
O
B
Y
E
TH ILINGTS IN
SA AT FI
TH
R
A
RC
2012 ED
ITION
ULTRA LIGHT CATAMARAN
O
R
INT
N
O
I
T
C
DU
Want to take your own sailing boat on holiday?
Want to go sailing at the weekend, but don‘t have space
for your own boat? It‘s simple - from being stored in your
cupboard, just load it in the car. This is a unique sailing
boat - a catamaran with inflatable floats.
It is small and light, but a full-bodied, fun sailing boat.
Fully portable, it fits in a single bag (or two bags for the
larger model), so you do not need a trailer complicating
your journey. Simply load the bag and go.
For all fans of sailing and water-sports MiniCat offers
the perfect, affordable opportunity to own a sailing boat
without any storage or transport worries. The ingenious
design enables MiniCat to be assembled single-handedly without tools in approx. 25 minutes; (instruction
DVD and printed instruction manual included).
This means that you can go for a quick sail whenever
you want.
With excellent sailing characteristics and simple
control, MiniCat appeals not only to young budding
yachtsmen, but also to older experienced sailors.
Despite MiniCat‘s ultra-light weight and simplicity,
major emphasis has been given to the quality and strength of the materials used during production.
With a 24 month warranty and full availability of parts
and accessories you can be sure that MiniCat is not
a toy, it‘s a serious sailing boat (that fits in your car!!).
ULTRA LIGHT CATAMARAN
M
S
L
E
OD
420
4 PERSONS
carrying capacity - 450 kg
2 BAGS - 1750 x 300 x 300 mm
and 23 kg each
310
2 PERSONS
carrying capacity - 235 kg
1 BAG - 1350 x 300 x 400 mm
and 36 kg
310
420
0
2
4
N
G
S
I
N
S
DEOPTIO
&
FRAME & DECK
The MiniCat 420 frame, to which
the floats attach is produced from a light-weight aluminium and
the frame parts are powder coated. The trampoline is produced from
high strength woven plastic fabric. The frame is attached to the
floats by means of welded-on ‘flags‘, which are inserted into the
pockets on the floats
MINICAT EASY
Easy
aluminium mast
Easy
rudder - fibreglass
aluminium
mast
main sail 6,5
m2
rudder - fibreglass
main sail 6,5 m2
Easy
MAST
aluminium mast
rudder - fibreglass
main sail 6,5 m2
The mast consists of three sections of equal length,
slotted together. The length of the assembled mast is 5.05 m.
The mast is from alloy tubing and has a groove for the sail
attachment. This construction ensures high rigidity and strength for
ultimate safety, performance and enjoyment.
FLOATS The MiniCat 420 is equipped with two inflatable floats
4.2m length and 45cm diameter. The floats are made of reinforced
‘Valmex‘, highly resistant to abrasion and very hard wearing. This material and production technology was adopted from the production of
‘white-water‘ rafts. The floats are single-chamber with a combined
load capacity of 530 kg.
KEEL FINS To fully enjoy your sailing you must confidently
control your boat. It is imperative to minimize ‘side-sail‘, especially when sailing against the wind. To achieve this keel fins were
designed to attach under each float. Their design and shape gives
excellent performance yet still allows the boat to be sailed in very
shallow water without the risk of damage.
MINICAT INSTINCT
Instinct
aluminium mast
Instinct
rudder - fibreglass
aluminium
mast
main sail 6,5
m2
rudder
- fibreglass
jib 3,2 m2
main
sail 6,5 m2
jib furler
jib 3,2 m2
jib furler
SAILS The MiniCat 420 is equipped with a main sail and jib. The total
Instinct
aluminium mast
rudder - fibreglass
main sail 6,5 m2
jib 3,2 m2
jib furler
area of the sails is 9.7 sqm (main sail 6.5 sqm, jib 3.2 sqm). The material
‘Dimension Polyant‘ is used with a surface density of 175 - 240 g/m.
Both the main sail and the jib have transparent windows to ensure better
visibility and security while sailing.
RUDDER
- aluminium mast
(black powder coated)
- rudder - fibreglass/epoxy
- main sail 6.5 m2
- aluminium mast
(black powder coated)
- rudder - fibreglass/epoxy
- main sail 6.5 m2
- jib 3.2 m2
- jib furler
MINICAT EMOTION
Emotion
Emotion
aluminium mast
rudder - fibreglass
aluminium
mastmain sail design
sport monofilm
rudder
- fibreglass
main sail
6,5 m2
sport
main sail design
jib 3,2monofilm
m2
main
sail 6,5 m2
jib furler
jib
3,2packet
m2
sport
jib furler
sport packet
aluminium mast
rudder - fibreglass
sport monofilm main sail design
main sail 6,5 m2
jib 3,2 m2
jib furler
sport packet
MiniCat 420 is fitted with one rudder in the craft
centerline, attached to the frame. The automatic cleat will unlock
the rudder rope in case the boat runs aground, thus protecting it from Emotion
damage. The design of the rudder allows it to be raised at a 90
degree angle, so at the shore or in very shallow water there is no danger of damage. The rudder can be locked in both positions, raised or
lowered. The tiller arm is jointed allowing full 360 degree movement.
- aluminium mast
(black powder coated)
- rudder - fibreglass/epoxy
- high speed construction
- sport monofilm main sail design
- main sail 6.5 m2
- jib 3.2 m2
- jib furler
- sport packet
FITTINGS
Fittings from the companies Ronstan, Seasure,
Clamcleat and Suchomel are used throughout the MiniCat.
All spare parts and accessories are available. Ask for the Parts and
Accessories Catalogue.
ULTRA LIGHT CATAMARAN
MINICAT EASY
M0401
M0401
M0401
M0402
M0402
M0402
M0403
M0403
M0403
M0404
M0404
M0404
MINICAT INSTINCT
M0501
M0501
M0501
M0502
M0502
M0502
M0503
M0503
M0503
M0504
M0504
M0504
MINICAT EMOTION
MINICAT 420
lenght
width
height of the mast
weight
diameter of floats
sail
main sail
4200 mm
2100 mm
5050 mm
44 kg
450 mm
main sail+jib
6.5 m2
jib
3.2 m2
trampoline
1900/1350 mm
dimensions of the bag
1750x300x300 mm
design category„D“
carrying capacity450kg
number of persons4
time of assembly / dismantling 30 min.
L
A
C
I
N
H
C
E
T O 420
INF
M0601
M0601
M0601
M0602
M0602
M0602
M0603
M0603
M0603
M0604
M0604
M0604
ULTRA LIGHT CATAMARAN
S
E
I
R
S SO
T
R
PA CCES 420
&A
Transport trolley
Engine support
Additional trampoline
Telephone case
Waterproof sacks
Float support
Engine fixing board. A board made
of waterproof solid wood is attached
in the point of the rudder mounting.
The trampoline designed for
storing and transporting cargo
(bags, sacks,...)
Protects against splashing and
also against short immersion
in water.
The sacks are made of transparent PVC and are offered in sizes
of 5, 12, 23 and 40 litres.
A pair of aluminium stands to keep
the floats of the ground.
Trapeze kit
Pressure gauge
Compressor powered by car battery
Wind Flag
Inflatable seats
Telescopic paddle
Complete set without vest.
The preassure indicator serves for measuring the air pressure in the inflated boat.
- dimensions 155x230x115 mm
- 12 V (battery is not included)
- output 450l / min, adjustable pressure, it switches off
automatically when the preset pressure is achieved
Indicator of wind direction, fits
on the top of the mast.
Seats are fitted to the main frame and ensure more comfortable
seating in a slightly higher position. Made of reinforced ‘Valmex‘,
highly resistant to abrasion and very hard wearing.
Adjustable to the maximum length
of 90 cm.
ULTRA LIGHT CATAMARAN
0
1
3
N
G
S
I
N
S
DEOPTIO
&
KEEL FINS
To fully enjoy your sailing you must confidently control your boat. It is imperative to minimize‚ ‘side-sail‘, especially when sailing against the wind. To achieve this keel fins were
designed to attach under each float. Their design and shape gives
excellent performance yet still allows the boat to be sailed in very
shallow water without the risk of damage.
- aluminium mast
- main sail 3.75 m2
- rudder - fibreglass/epoxy
MAST
FRAME & DECK The MiniCat frame, to which the floats
attach, consists of rigid, transparent polyester sections on a light-weight aluminium frame. KONTYPOR foam with UV protection provides comfort at the seating areas.
The trampoline is produced from high strength woven plastic fabric.
The transparent polyester seats are designed for comfortable sailing.
Attached to the floats by straps these are secured with alloy tubes
maintaining the position of the floats and the deck. The fabric trampoline sections fill the frame and are tightly secured by a threaded line.
As the trampoline is taut and the frame is tight there is no need for
any additional fixings. The central tube is attached to the underside of
the frame and the rudder mechanism is housed at the rear of the tube.
At the front of the tube is the anchor-point for the mast line and jib.
FLOATS
MINICAT STANDARD
The mast consists of three sections of equal length,
slotted together. The length of the assembled mast is 3.8 m. The
mast is from alloy tubing and has a groove for the sail attachment.
This construction ensures high rigidity and strength for ultimate safety, performance and enjoyment.
SAILS
The MiniCat is equipped with a main sail and jib.
The total area of the sails is 5.15 sqm (main sail 3.75sqm , jib
1.40sqm). The material ‘Dimension Polyant‘ is used with a surface
density of 175 g/m. The main sail is ‘all-spire‘ construction, i.e. without a yardarm. There are 6 flat spires in the sail. MiniCat Sport is
equipped with a ‘jib furler‘. The main sail has a window to ensure
better visibility while sailing.
The MiniCat is equipped with two inflatable floats
3.1m length and 33cm diameter. The floats are made of reinforced
‘Valmex‘, highly resistant to abrasion and very hard wearing. This material and production technology was adopted from the production of‚
‘whitewater‘ rafts. The floats are single-chamber with a combined
load capacity of 235 kg.
RUDDER The rudder on the MiniCat is attached to the central
tube. The design of the rudder allows it to be raised at a 90 degree
angle, so at the shore or in very shallow water there is no danger
of damage. The rudder can be locked in both positions, raised or lowered. The tiller arm is jointed allowing full 360 degree movement.
MINICAT SUPER
- aluminium mast
- main sail 3.75 m2
- jib 1.4 m2
- rudder - fibreglass/epoxy
MINICAT SPORT
- aluminium mast
(black powder coated)
- main sail 3.75 m2
- jib 1.4 m2
- jib furler
- rudder - fibreglass/epoxy
FITTINGS
Fittings from the companies Ronstan, Seasure,
Clamcleat and Suchomel are used throughout the MiniCat. All spare
parts and accessories are available. Ask for the Parts and Accessories Catalogue.
ULTRA LIGHT CATAMARAN
MINICAT STANDARD
M0101
M0101
M0101
M0102
M0102
M0102
M0103
M0103
M0103
M0104
M0104
M0104
M0105
M0105
M0105
MINICAT SUPER
M0201
M0201
M0201
M0202
M0202
M0202
M0203
M0203
M0203
M0204
M0204
M0204
M0205
M0205
M0205
MINICAT SPORT
MINICAT 310
lenght
width
height of the mast
weight
diameter of floats
sail
main sail
3100 mm
1400 mm
3800 mm
35 kg
330 mm
main sail+jib
3.75 m2
jib
1,4 m2
trampoline
1350/950 mm
dimensions of the bag
1350x300x400 mm
design category„D“
carrying capacity
235 kg
number of persons
1 adult + 1 child
time of assembly / dismantling 25 min.
L
A
C
I
N
H
C
E
T O 310
INF
M0301
M0301
M0301
M0302
M0302
M0302
M0303
M0303
M0303
M0304
M0304
M0304
M0305
M0305
M0305
ULTRA LIGHT CATAMARAN
S
E
I
R
S SO
T
R
PA CCES 310
&A
Additional trampoline
Engine support
Telephone case
Telescopic paddle
The trampoline designed for storing and transporting cargo (bags, sacks,...)
Engine fixing board. A board made of waterproof solid
wood is attached in the point of the rudder mounting.
Protects against splashing and
also against short immersion
in water.
Adjustable to the maximum length
of 90 cm.
Two smaller bags
Waterproof sacks
Wind Flag
Pressure gauge
The sacks are made of transparent PVC and are offered in sizes
of 5, 12, 23 and 40 litres.
Compressor powered by car battery
The boat may be packed in two smaller and
lighter bags instead of one bag.
1350 x 300 x 200 mm
Indicator of wind direction, fits on
the top of the mast.
- dimensions 155x230x115 mm
- 12 V (battery is not included)
- output 450l / min, adjustable pressure, it switches off
automatically when the preset pressure is achieved
The preassure indicator serves
for measuring the air pressure
in the inflated boat.
ULTRA LIGHT CATAMARAN
T
N
A
T
R
O
P
IM O
INF
COMPONENT PARTS
MiniCat is made from the following component parts:
Frame:
Aluminium Frame (alloy AlMgSi 0.5)
Mast:
Aluminium Mast (alloy AlMg 0.7Si) powder coated
Sail Material:
Dimension Polyant with a surface density
of 175 - 240 g/sqm
Float Material:
Valmex
Deck Seating:
KONTYPOR foam for comfort when sailing
with UV protection
Keel Fin:
Polyprophylen UV stabilised
REPAIR KIT
MiniCat is supplied with a Repair Kit. This allows you to carry out
minor repairs yourself. The manufacturer or an approved repairer
must carry out major repairs.
PARTS & ACCESSORIES
A range of useful accessories & upgrades are available for your
MiniCat as well as all spare parts. Please see the MiniCat Parts
and Accessories Catalogue.
WARRANTY
MiniCat is covered by the manufacturer´s 24 month warranty.
Please ask your distributor for the warranty terms.
T
C
A
T
N
CO
www.esako.cz
CERTIFICATION
MiniCat has been designed and manufactured to conform with
the latest European Safety Standards, certified to:
EN ISO 6185-1 and EN ISO 6185-2.
The MiniCat name and design is protected by Patent.
SPECIFICATION
Due to a policy of ongoing development your MiniCat may differ
in specification to that shown in this brochure. We reserve the
right to change specifications and design without notice.
SELECTED COMPONENTS - SAILING CLASSIC:
Fittings from the companies Ronstan, Seasure, Clamcleat and
Suchomel are used throughout the MiniCat.
ULTRA LIGHT CATAMARAN
ULTRA LIGHT CATAMARAN
Laura Dekker
the youngest person sailing around the world
ITION
“MiniCat sails really well and it is
very fast. It is easy to assemble and
the boat is very well thought out so
you do not need much storage space
if you are not living near to the sea.
It can be carried along in one or two
bags. Usually advertisements are
very much exaggerated but this one
really says it like it is. I have seen
and sailed numerous inflatable catamarans and this one really stands
above them all.“
2012 ED
RA
ULTHT RAN
LIGTAMA
CA