BREN MK1 LMG PARTS SET MAGAZINE CHEST VEST
Transcription
BREN MK1 LMG PARTS SET MAGAZINE CHEST VEST
A2 Phones Open: Mon - Fri, 8:30am – 5:00pm Showroom Open: Monday Saturday, 10:00am – 5:00pm, Friday til 8:00pm 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com NEW ITEM ! U.S. WW2 M19 60MM MORTAR (non firing) U.S. Marine Raider and Army Airborne units benefited from this lightweight mortar rushed into action in 1942 which saw use in Europe and Pacific theaters and from Korea through Vietnam. Our nonfiring mortar uses the original baseplate and M15 sight assembly blended with our new made tube. Never offered before in the U.S.! Mortar only .................................$495.00 MISC397 U.S. 60MM MORTAR SLING WW2 style heavy duty sling made from thick canvas with leather ends. One end also has the wire loop for attaching around the ‘ball’ end of the mortar tube while the other end has a leather cup. Late manufacture........................................ $24.95 SLNG105 M2 60MM MORTAR BASEPLATE $275.00 MISC409 BREN MK1 LMG PARTS SET Nev offer er befo ed re! After over 50 years of searching for these on the international market, we’ve finally obtained the classic .308 Bren as used from the 1950s through the 1990s! Last major use was in the Falklands War, but they are still blasting away in the Congo, Sudan, and other hot spots. Predecessor to the MAG-58, the Bren .308 LMGs evolved in many versions, whether converted from existing Bren models or made completely new, these guns were a formidable improvement on the .303 models. Stalwart enough for use in the Falkland operation where British 2 Para, employed them along side the MAG-58. The magazines were ideally made to interchange with the the L1A1 service rifle of the time. Sarco has obtained the Model L4A3 Bren Light Machine Gun and had the receivers cut to BATF specifications. All parts are BREN /L1A1 30RD., included with the kit including the 4 pieces of Demil. Rec., new made short chambered .308 NATO MAGAZINES barrel with all original fittings (some assembly required), and we include 1 – 30 rd. .308 magazine! The quality of the kit is generally in .308 Bren / L1A1 magazines are here! Steel 30rd. magazines work with both the L4 series very good condition with a new barrel. This would make a fabulous of .308 Brens and also the L1A1 Rifle. Can be ‘semi’ build, or display gun. Get one while you can because they are adapted to work with the Metric FALs as well. Very good condition..............................BREN124 quite limited! 1 magazine $39.00, 2 for $29.00 each, 10 .............................................................................. $695.00 BREN122 for $25.00 each NEW ITEM ! Evolution of the Bren stemmed from initial designs at the Brno factory in Czechoslovakia. After licensing, patent changes, and political inclinations, the British Commission brought the design to Enfield where production commenced in 1937. From then on , it is a story of Hell, Death, and Destruction…. As one of the finest machine guns put to use on modern battlefields. Bren Mk1 LMGs were the most expensive to make and perhaps the best looking with all of it’s intricacies . Timing of production was excellent as in less than 2 years, the ‘Tommy’ and Commonwealth soldiers would be carrying it into battle at Dunkirk, El Alamein, Borneo, D-Day and untold of altercations and sorties as the Axis powers were rolled up. Ultimately, it served with well over 30 countries and can still be found in remote regions. Our Bren Mk1 kit comes with all parts shown including a very good MK1 barrel, five - .303 magazines, and the original receiver cut in 4 pcs per the BATF requirement. ..................................................................................................................................................... $649.95 BREN019 MAGAZINE CHEST VEST w/4 BREN .308 MAGS NEW ITEM ! Rhodesian era Bren Chest Vest as used to carry the .308 magazines. We supply the vest with 4 excellent condition , Bren .308 30 rd. magazines. Excellent bargain! Vest is new and in grass pattern camo. $119.95 BREN128 BREN MK 3 LMG PARTS SET NEW ITEM ! Bren MK2 barrel, NEW .................................$175.00 BREN066 P6/SIG 225 WEST GERMAN POLICE HOLSTER Original West German Police ‘long drop’ leather holster. Extremely well made with detachable swivel attachment. Used, but in very good condition. Holds SIG 225 & similar sized pistol frames..................$18.95 HOL120 Regarded as the lightest of the Bren Guns, the MK3 had lightening cuts made to the receiver and usually was found with a barrel @2-3/4 inches shorter than the MK2 series barrel. Nevertheless, both sized barrels were used on this gun in WW2 . This model was envisaged as an answer for Airborne and Infantry troops fighting in the jungles of the Pacific, but actually once production started in 1943, it found its way to every theater of the war. Our kit comes with all parts shown including the correct receiver cut to BATF specifications, a very good condition MK2 barrel and 5 - .303 cal. magazines.........................................$495.00 BREN121 MK3 Parts Set w/New MK2 barrel...................................................................................$595.00 BREN125 SIG 225/226 SHOULDER HOLSTER German Police shoulder holster for the SIG 225 & 226. Also referred to as the P6 holster. Comes with one spare magazine pouch with belt slots. Very well made with Ox blood finish and leather / elastic strap. Right hand draw................................... $19.95 HOL127 WW2 37MM RUSSIAN SPADE MORTAR Rare and truly innovative design as used in the Russo Finn War and along the Soviet western front. A shovel that turns into a mortar! We have the ‘Kamabee Keep’ remake of this item, made from steel and non-firing. Complete with articulated spade that digs and also acts as a baseplate when moved to the perpendicular. Soviet infantry carried this as a standard E-tool on their belt. You can read more about it on our web site! Limited production. Mortar only...... $175.00 MISC458 Also available: 15 rd. bandolier chest rig with Mosin Nagant pouch as worn by Soviet troops ..........................$65.00 MISC429 Belt Carrier for the mortar ..........................$19.95 MISC421 37mm mortar round for display ......................$19.95 MISC356 ITALIAN WW2 ‘SAMURAI VEST’ WEST GERMAN POLICE PPK BELT HOLSTER Well made right hand draw undercover holster nicely form fit and curved. Made for the PPK and similar sized pistols. Medium brown color. Used, but in very good condition. Leather ‘Pancake style’.............. $14.95 HOL125 RPG-2 ROCKET LAUNCHER Original Com bloc RPG-2 Rocket Launcher that has been demilled to comply with BATF regulations. Anyone can own this non firing, original display piece that is in excellent condition otherwise. Well known for its use in Vietnam, African conflicts, and in the Mid-East. Read more about it on our website! Very Limited! RPG-2 Launcher only...................................... $475.00 RPG-2 Rocket (inert) when purchased with launcher ......................................................................... $75.00 RPG-2 Backpack for holding 3 rockets.............. $60.00 Backpack with 3 rockets..................... $199.95 Highly coveted Italian Paratrooper Assault Vest also known as the ‘Samurai Vest’. Even German Paratroops tried to get their hands on these because they were comfortable, capable of holding lots of ordnance and worked well with magazines from the Sten, Beretta 38,and MP40 SMGs. Read more about it on our web site. Originals are almost impossible to find! New made & Limited Availability $125.00 MISC459 NEW ITEM ! JAPANESE MODEL 99 ARMORED SHIELD RL012 RL013 RL014 RL015 RPG2 Package of RPG2 launcher, backpack, Cleaning Rod, Gunners Spares and tool set........................... $625.00 RL016 Japanese WW2 issued steel shield as fielded in 1939 for Machine Gunners and also used by Arisaka riflemen in defensive positions. Seen throughout the Pacific campaign and in China/Manchuria. Several versions were developed, and these were primarily used by Type 96 and Type 99 machine gunners, but riflemen also used them as was seen extensively throughout Guadalcanal. Shield has a carrying handle and adjustable stability brace. Very few have made it back to the U.S. after the war, but Sarco has had the shield reproduced from an original. A smart design and finally available for military collectors! With some Kevlar laminates applied, this shield could make an excellent personal combat shield for today’s combat operations. Sold as a collectible .............................................. $125.00 MISC443 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com AR15/M16 RIFLE PARTS AM136 223 (5.56) Dummy Rounds from Lake City – Original G.I. green tip......................10 for $8.95 AR098 AR Safety............................................... $10.95 AR100 AR15 Disconnector....................................$9.95 AR092 AR15 Hammer (Semi auto)..................... $15.00 AR001 AR15 Lower Receiver Parts Kit (SemiAuto)...................................................... $44.95 AR102 AR15 Trigger (Semi-Auto)....................... $17.95 AR082 AR15/M16 Action Spring..........................$4.00 AR120 AR15/M16 Action Spring (shorty style)......$4.00 AR032 AR15/M16 Barrel nut...............................$7.50 AR162 AR15/M16 Bipod Pouch New G.I. (nylon) .................................................................$4.95 AR138 AR15/M16 Bipod with new canvas G.I. zipper pouch with accessory pouch on side....... $13.50 AR137 AR15/M16 Bipod w/ O.D. Green Nylon pouch .............................................................. $12.50 AR322 AR15/M16 Bipod w/o Pouch, used...........$9.95 AR060 AR15/M16 Bolt Cam Pin...........................$6.00 AR071 AR15/M16 Bolt Carrier Key.................... $13.50 AR070 AR15/M16 Bolt Carrier Key Screw............$1.00 AR106 AR15/M16 Bolt Catch...............................$7.50 AR105 AR15/M16 Bolt Catch Pin.........................$1.00 AR107 AR15/M16 Bolt Catch Plunger..................$7.50 AR108 AR15/M16 Bolt Catch Spring....................$1.00 AR057 AR15/M16 Bolt gas rings, set of 3.............$3.00 BRUSH-003 223 cal bore brushes, bronze 10 for .................................................................$8.95 AR080 AR15/M16 Buffer .................................. $12.95 AR081 AR15/M16 Buffer Short......................... $12.95 AR15 AND M16 PARTS AND ACCESSORIES AR087 AR15/M16 Buffer Retainer........................$2.00 AR088 AR15/M16 Buffer Retainer Spring.............$1.00 AR306 AR15/M16 Buttstock hinged trapdoor assy .................................................................$9.95 AR307 AR15/M16 Buttstock trapdoor hinge..........$4.00 AR119 AR15/M16 Butt Swivel A1/A2...................$4.00 AR056 AR15/M16 Butt Swivel Pin........................$1.00 AR118 AR15/M16 Butt Swivel Screw M16A2........$2.85 AR002 AR15/M16 Charging Handle assy........... $16.95 AR188 AR15/M16 Cleaning Toothbrush, G.I. .......................................... $2.00, 3 for $3.75 AR164 AR15/M16 Comb. Wrench (Original G.I.) .............................................................. $16.95 AR104 AR15/M16 Disconnector Spring................$1.00 AR178 AR15/M16 Early prong flash hider......... $12.50 AR036 AR15/M16 Ejection Port Cover..................$7.95 AR034 AR15/M16 Ejection Port Cover Snap ring .................................................................$1.00 AR035 AR15/M16 Ejection Port Cover Spring......... $1.50 AR172 AR15/M16 Ejection port cover pin.............$2.75 AR067 AR15/M16 Ejector....................................$3.00 AR066 AR15/M16 Ejector Pin..............................$1.00 AR068 AR15/M16 Ejector Spring.........................$1.00 AR064 AR15/M16 Extractor.............................. $10.95 AR063 AR15/M16 Extractor Pin...........................$2.00 AR065 AR15/M16 Extractor Spring......................$1.00 AR059 AR15/M16 Firing Pin................................$7.95 AR058 AR15/M16 Firing Pin Retaining.................$2.00 AR410 AR15 Fixed stock that looks collapsible .............................................................. $39.95 AR011 AR15/M16 Flash Hider Washer.................$1.00 AR049 AR15/M16 Forward Assist, Teardrop type SARCO DOES IT AGAIN! Double time it and get these before they’re gone..... Everything present in this Kit to make an AR15 type rifle except for the Lower Receiver. All parts included are new mfg parts. Sling and magazine are not included. Buttstock supplied is the telescoping 6 position M4 stock with correct buffer and spring and the 16" barrel is brand new and has the front sight assy. installed. We use the industry standard hammer/trigger pin with a diameter of .154": Most Lower receivers use this size pin although there are some Colt mfg. lower receivers that use .170" pins which are not compatible with standard parts. The Upper Receiver is a flattop model and we offer it with and without the carry handle/rear sight configuration. A.KIT w/ Flat top upper rec. w/ carry handle and rear sight $415.00, 3 for $1230.00 AR150 (shown in picture) AR111 AR15/M16 Magazine Catch Spring............$1.00 AR126 AR15/M16 Magazine Orlite (30 Round) .....................................................$11.95 each, AR163 AR15/M16 O.D. Web Case w/ Pouch...... $17.95 AR133 AR15/M16 Pin Kit.................................. $14.95 AR043 AR15/M16 Rear Sight Aperture, Standard .................................................................$5.00 AR039 AR15/M16 Rear Sight Detent....................$2.00 AR040 AR15/M16 Rear Sight Detent Spring...........$1.00 AR038 AR15/M16 Rear Sight Drum.....................$6.50 AR037 AR15/M16 Rear Sight Drum Pin...............$1.00 AR046 AR15/M16 Rear Sight Spring....................$1.00 AR041 AR15/M16 Rear Sight Windage Screw.......$7.50 AR115 AR15/M16 Rear Takedown Pin..................$5.75 AR050 AR15/M16 Round Forward Assist.......... $14.75 AR130 AR15/M16 Rubberized Swivel front new.....$5.00 AR076 AR15/M16 Safety Detent...........................$2.00 AR075 AR15/M16 Safety Detent Spring...............$1.00 AR171 AR15/M16 Scope Mount Rings..................$6.95 AR095 AR15/M16 Sear Assembly...................... $20.00 AR116 AR15/M16 Sear Spring.............................$3.00 AR145 AR15/M16 Shorty Buttstock Assembly, high strength fiberglass w/steel locking ring.. $29.95 AR134 AR15/M16 Spring Kit............................. $12.95 AR302 AR15/M16 Top sling adapter.....................$1.95 AR090 AR15/M16 Trigger Pin..............................$1.50 AR103 AR15/M16 Trigger Spring.........................$2.00 AR176 AR15/M16 Triggerguard, aluminum..........$6.75 AR112 AR15/M16 Triggerguard Pin.....................$1.00 AR006 AR15/M16A1 Birdcage Flash hider...........$6.95 AR085 AR15/M16A1 Buttcap Screw (Short).........$2.25 AR220 M16A1 Butt Swivel Screw..........................$3.00 COMPLETE UPPER KIT FOR OUR AR-RETRACTABLE STOCK CARBINE As shown to the left all parts but lower receiver parts and buttstock assy parts $365.00, 3 for $1079.00 AR335 This is the flat top upper with detachable handle. PLEASE NOTE: Building an AR15 requires technical skills. Be sure you are qualified before you build or seek a professional gunsmith. BEST DEAL ANYWHERE! NEW! ITEM New production in the white! Completely profiled and perfect for a retro or contemporary AR build! This has the lean ‘pencil profile’ and is ready for the installation of the front sight post & drilling of the gas hole. 1 in 12 twist, 5.56 cal., and made in the USA ...........................$145.00 AR201 COMPLETE M4/AR15 16" BARREL Complete 16 inch .223 ‘Wylde’ barrel with 1 in 9 twist. Ready for installation....................... $125.00 AR426 AR15 ACCESSORIES Cleaning rod 4 pc. CLN030............... $6.95 Muzzle Cap (plastic) AR192 ...................................................... $1.50, 3 for................................................ $2.75 Stripper clip guide STC005................ $1.50 Magazine dust covers AR199 3 for................................................ $2.00 M16 G.I. cleaning “toothbrush” orig. G.I. issue. AR188...................................$2.00, 3 for................................................ $3.75 SPECIAL - one each of all 5 items above. AR321.............................................. $8.95 M16A2 PEEL OFF FLASH HIDER WASHERS AR358............................................. $7.95, 3 for............................................. $18.95 AR DELTA RING REMOVAL TOOL Makes handguard removal simple AR326.... $8.95 FLASH HIDERS 1.M16A1 $6.95 AR006 2.M16A2 $8.95 AR007 3.Early 3 prong type flash hider $12.50 AR178 Not for sale in NJ AR /M16 ARMORER'S KIT COMPLETE BOLT CARRIER ASSEMBLED $125.00, M16 AR264 AR15 AR263 3 for $360.00 SPECIAL SALE! $110.00, 3 for $299.00 IT’S A SALE ON SALE!! $99.95, 3 for $285.00 Be ready when the time comes! Quality tool set for removal & installation of parts. Easily worth the cost just for the quality vise block set! INCLUDES - VISE BLOCK, DELTA WRENCH, TOOL BRUSH, GI COMBO TOOL, BROKEN SHELL EXTRACTOR, BORE & CHAMBER BRUSHES, 1 SIGHT TOOL, CLEANING ROD SET $91.50 value for just ........................................$59.95 AR373 We have done the hard work for you. These are fully assembled upper halves complete and ready to drop on to your complete lower. All parts made in the U.S.A.! Includes Flat Top Upper, barrel assembly, complete bolt and carrier assembly, charging handle assembly, forward assist and ejection port cover assembly.........................................................................$359.00 AR013 Add ons: Kit with carry handle, rear sight assembly........ $389.00 AR014 Add ons: Lower parts kit and collapsible stock and carry handle................................................................. $449.00 AR117 9MM AR-15 CONVERSION SET Consists of a complete upper flat top barreled receiver with a rail gas block in place of the front sight, custom flash hider, mag well adapter and 30 rd. magazine. (Deduct $15 from kit if you live in a state where you cannot have the magazine). Flash hider is permanently attached to the barrel. Made in the USA. ...................................................................................... $595.00 AR395 (See Hi Cap Mag restrictions on page O) AR15 & M16 MAGS Orlites & Orig Colt & others – See our e-sarcoinc.com for sales on these items NEW M16A2 ROUND HANDGUARD SETS MILITARY PRODUCTION Shortie length w/liner $14.95 AR185 HIGH QUALITY AR/M4 CARBINE LENGTH QUAD RAIL HG SYSTEM $34.95 3 FOR $94.50 AR145 Super price! Includes all parts shown except for the receiver. Comes with late model pistol grip and our hammer & trigger pin diameter is the industry standard at .154. Some Colt made guns use a .170 diameter which is not compatible with our parts. Compare our ‘Shocktober’ price!.....................$44.95 ea. Or 3 for........................................................................... $129.95 AR001 • Bore brush • Chamber brush • Cleaning rod • Broken shell • Tooth brush extractor •Oiler • Stripper clip guide • Muzzle cap • Grenade launcher • Dual front sight tool Tension band $17.50, 3 for $49.95 AR240 AR205 AR15/M16 chamber brush.......... 2 for $3.95 AR141 M16 Original G.I. Buttstock, plus lower receiver extension, buffer and spring...............$59.95 COLLAPSIBLE AR-15 CARBINE STOCK AR15 LOWER RECEIVER PARTS SET AR15/M16 CLEANING KIT & ACCESSORY KIT AR018 AR15/M16A1 Frong Sight Post..................$5.00 AR142 AR15/M16A1 G.I. Buttstock w/trap plus lower receiver extension, buffer, & spring........ $59.95 AR073 AR15/M16A1 Pistol Grip (Used)............. $12.50 AR228 AR15/M16A1 Complete Rear Sight Set... $20.00 M16A1 Rear Sight Assy. Includes the correct A1 aperture. Getting hard to find!............................... $19.95 AR157 AR15/M16A1 Sight Tool (5 Prong).............$4.95 AR214 AR15/M16A2 Burst Trigger.................... $15.00 AR143 AR15/M16A2 Buttstock Crnt Prod. Comes with buffer, spring & all hrdwr milspec... $54.95 AR007 AR15/M16A2 Flash hider..........................$8.95 AR144 AR15/M16A2 New Buttstock (Current production) stripped............................... $34.95 AR074 AR15/M16A2 Pistol Grip new....................$8.95 AR158 AR15/M16A2 Sight Tool (4 Prong).............$4.90 AR091 M16 Hammer......................................... $15.00 AR424 M16 Front Sight Base, Early.................. $23.75 AR127 M16 Magazine 6 Orlites w/ Carriers....... $59.95 AR317 M16 port firing gun safety plate – new G.I. in package.................................................. $24.95 SLNG099 M16 Single Point Sling, BLACK............. $17.95 SLNG100 M16 Single Point Sling, GREEN............ $17.95 SLNG101 M16 Single Point Sling, SCORCHED DARK EARTH................................................... $17.95 AR399 M16A2 Buttplate used good ......................................$3.95, 10 for $29.95 AR358 M16A2...... Peel off flash hider washers. Used take off. Work fine.............................................$7.95 $38.95 AR384 Other sell for up to $150.00 or more M4 16" COMPLETE BARRELED FLAT TOP UPPER ASSEMBLIES B.KIT w/ Flat top upper rec. without carry handle & rear sight $389.00, 3 for $1155.00 AR224 20" 5.56 AR-15 BARREL .............................................................. $21.50 AR047 AR15/M16 Forward Assist Pin..................$1.00 AR048 AR15/M16 Forward Assist Spring.............$1.00 AR077 AR15/M16 Front and Rear Takedown Detent Spring.......................................................$1.00 AR078 AR15/M16 Front and Rear Takedown Detent .................................................................$1.00 AR079 AR15/M16 Front Pivot Pin........................$4.95 AR020 AR15/M16 Front Sight Detent...................$2.00 AR021 AR15/M16 Front Sight Detent Spring........$1.00 AR024 AR15/M16 Front Swivel Pin......................$1.00 AR023 AR15/M16 Front Swivel Rivet...................$1.00 AR029 AR15/M16 Gas Tube 16" (Shorty).......... $11.95 AR028 AR15/M16 Gas Tube 20" (Standard)...... $13.50 AR027 AR15/M16 Gas Tube Pin...........................$1.00 AR072 AR15/M16 Grip Screw & Washer..............$1.00 AR089 AR15/M16 Hammer Pin............................$1.50 AR093 AR15/M16 Hammer Spring.......................$2.00 AR275 M16/M16A1 Handguard, new Colt (Right) .............................................................. $14.95 AR005 AR15/M16 Handguard (Right) Used $10.00 AR025 AR15/M16 Handguard Cap (Triangular) .................................................................$6.95 AR033 AR15/M16 Handguard Slip Ring (G.I)........$7.50 AR030 AR15/M16 Handguard Snap Ring.............$2.50 AR031 AR15/M16 Handguard Spring...................$6.00 AR083 AR15/M16 Lower Receiver Extension..... $20.00 AR165 AR15/M16 Mag Carrier.............................$1.50 AR109 AR15/M16 Magazine Catch.......................$7.50 AR200 AR15/M16 Magazine Catch Assembly.... $10.00 AR177 AR15/M16 Magazine Catch Button, metal .................................................................$2.50 B2 M4 stock set with handguards & pistol grip............... $50.00 AR316 New M16A2 or M4 pistol grip ................................ $8.95 AR074 ORIGINAL U.S. AIRFORCE .22 LONG RIFLE CONVERSION UNIT for more M16 with Teflon magazine-1 or 2 only! Super Rare........... $350.00 AR425 EXTRA MAGAZINES FOR THE G.I. M261 .22LR CONVERSION UNIT FOR THE AR15 $24.95 ea. M26120 This is the end of these Send $1.00 for complete list of our M261 parts (M26122) M261 manual (few only) - $4.95 M26121 See e-sarcoinc.com for a spare parts put-away kit for the M261 kit • Six Positions • Precision machined Parts for Maximum Strength • Super Quality Aluminum Buffer • Includes complete stock assembly w/ buffer & recoil spring. • Reinforced grids Black (AR145) SPECIAL SALE ON UPPERS! BEST PRICE EVER! WE GOT A GOOD BUY!! AR FLAT TOP A4 UPPERS Many choices to suit your needs. A: Stripped flat top upper....... $48.95 AR196 B: Stripped Flat Top Upper with our complete A-4 carrying handle assy. (includes complete A2 rear sight assy).................$74.95 AR202 C: Stripped flat top upper with M4 carry handle assy and also ejection port cover assy and forward assist assy.......... $94.95 AR204 M4 AR15/M16 RECEIVER CARRYING HANDLE AND REAR SIGHT ASSEMBLY Fits Flat Top Upper reciever with Picatinny Rail. Complete with M16A2 rear sight assembly. AR180 SPECIAL SALE! $29.95, 3 for $84.95 M16 AUTO SEAR Orig U.S. G.I. exc cond. Few only ..........................$19.95 AR095 Buy a replacement(s) for your legal M16. All NFA rules apply. Note: These go out of time with use. M16 BOLT CARRIERS Just Came In The Door!!.......... $65.00 3 for........................... $180.00 AR229 SPECIAL SALE! $49.95, 3 for $139.95 *****Original USGI***** EARLY VIETNAM ERA M-16 STOCK SETS & TRIANGULAR HANDGUARDS 1. Early Stock without trap door and with rubber buttplate; good condition / no cracks ............................................$35.00 AR146 2.Original M16 Pistol Grip......... $9.95 AR364 3.Original Triangular Hand Guard Set ............................................$35.00 AR318 4.Set of early stock, triangular hand guard set, and early pistol grip. Good condition, no cracks..................................$69.95 AR255 M16-A1 STOCK SET 5. 6. Original M16A1 stock with buttplate & swivel ................................................ $37.50 AR411 Complete set of M16A1 stock, triangular handguards and pistol grip...... $ 69.95 AR412 ITALIAN POST WAR GARAND BM59 RIFLE PARTS SETS BASIC BM59 KIT 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com SHOULDER HOLSTER ‘MID FRAME COMPACTS’ This kit includes all the unique BM59 parts – all other parts are interchangeable with Garand. This allows you to get your Last Chance! Price is about to go up! basic kit at an affordable price and you can acquire the Garand type parts by shopping or trading around but this will let you get your kit stashed.Stripped BM59 bolt, original muzzle break, trigger housing with mag catch assembly, bolt hold open with pin & spring, operating rod, operating rod spring and guide, safety spring, stock, rear handguard, front cartridge guide & magazine catch & pin, barrel (good VG cond) and magazine. All other parts are interchangeable with Garand....................... $489.00 BM59030 SPECIAL OF THE MONTH...............................................................$395.00 Light West German Police Shoulder Holster for various ‘mid frame’ pistols like : Sig P238, Sig P938, Mauser 1910, Colt 1903 Hammerless, S&W Bodyguard, Colt Mustang XSP, Beretta PICO, Keltec P32, Remington RM380, etc. and many others. Canvas straps with strong leather reinforced junctions and holster body. Has spare magazine pouch attached. Original, in excellent condition.......................................................... $19.95 MISC490 M14 PARTS & ACCESSORIES NEW G.I. SPEC M14 & M14A BOLTS WITH ROLLER These are New production Rockola forged bolts to original GI blueprint and heat treat. 8620 H Steel/#719-0185 GI print. Heat treat spec A-Z-2M47512. Fully Military compliant part check the TALK boards....$175.00 M14155 (ORDER EARLY THESE WILL FLY OUT) NEW!!! M14 BARRELS IN STOCK NEW ITEM! Brand new .308 cal M14 Barrels made by one of the best U.S. barrel manufacturers $175.00 ea. M14124 M14 FLASH HIDER PLIERS Available once again. New condition. A necessity for your M14 ensemble $16.50 ea. TOOL039 M14 STRIPPER CLIPS 7 original clips for $9.95 STC016 Note: See our 1st of the month ad or our E-com site for M-14 Magazines. M14 FLASH HIDERS W/BAYO LUG ORIGINAL G.I. TRW M14 RECOIL SPRINGS ORIGINAL G.I. M14 BUTTPLATE SETS Also work of course in all semi autos. Just in the door...................... $7.45, 5/......................................... $29.95, 10/............................$49.95 M14052 NM SIGHT & APERTURE BUYERS PLEASE NOTE: The aperture is made oversized to be fit to your sight base. The procedure is simple & instructions are included. See our website for the instructions if you wish. National Match Rear Sight Aperature Your choice of .520 or .595 diameter $39.95 M14127 7.62MM BROKEN SHELL EXTRACTOR $5.95 BSE002 M14 RIFLE CLEANING KIT Kit consists of following items: G.I. sectional cleaning rod,Rod handle/ combination tool Ratchet chamber brush, .30 cal. bore brush G.I. carrying pouch $12.50 3 for $29.95 CLN070 M14 SPECIAL ITEMS 1. M14 gas cylinder (Chinese)........$29.95 M14108 2. G.I. M14 connector rod.............. $14.95 M14049 .........................................................3/$36.50 3. G.I. front stock swivel set, new.....$8.95 M14117 4. National Match front swivel....................$23.75 5. M14 E2 stock liner set (front grip mounting kit) G.I. new in package contains liner Grip hinge base, screws & plugs ..................................................... $64.50 M14113 6. New bolt rollers.......................... $4.95 ea M14060 7. M14 bolt with roller, new............. $175.00 M14155 9. M14 bolt roller with retaining clip.....$7.95 M14352 10. M14 bolt roller retaining clip.............. 3.95 M14158 See our website for other M14 parts Found a few more... M14 G.I. “SPOTTY BOLTS” Out of parade rifles – Spot weld in firing pin hole and rear – last of the 1000 we had. $39.95 M14147 While the few last DELUXE M14/M1A SNIPER SCOPE MOUNT This M14/M1A Tactical Scope Mount with 3 Point locking, mounts easily to the charger guide Dovetail and Receiver mount lug. It also has open sight channel that lets you use your iron sights. The top feature of this mount is that it has a rigid 3 point mounting for both rigidity of the scope system plus maintenance of Zero. Special Value $24.95, 3 for $69.95 M14012 Rings ...................................................$4.95 SCP007 Set of rings & mount.....................................$27.95, 3 for.................................................$79.95 M14010 M14 ORIG G.I. FLASH HIDERS Found a few only!...$89.95 M14157 (Note: BM59 prints are for the full auto only and are for dimensional reference only. They are also non returnable) Just got a great report from a customer who built one of our BM59 kits on a Garand receiver with our parts It came out FABULOUS Original BM59 Mags $59.95 BM59-001 Extra mag with above kit $49.50 ea. Last Chance! Price is about to go up! BM59014 AMERICAN GARAND BRAND NEW M1 GARAND BARRELS… Currently produced in USA by a 30 Year Top Line Barrel MFG .30-06 and .308 caliber barrels in stock ! Newly manufactured barrels ready to install on your M1 Garand Receiver. Made by one of the premier barrel manufacturers in the USA, these .30-06 caliber barrels and .308 barrels are manufactured from 4140 steel with 4 groove rifling and a 1 in 10 twist. Beautiful high quality parkerized replacement barrels. Because they are made here in the US, they do not have the ungainly import barrel markings. A great chance to get rid of that ‘Blue Sky’ or other import marked barrel and also restore accuracy! Barrels should always be installed by a qualified gunsmith. .30-06................................. $149.95 GRD157 .308..................................... $149.95 GRD158 Mix or Match 3/.................. $429.95 GRD337 Please specify when ordering In stock again! New Production $29.50 M14079 Complete buttplate & the 2 screws ........................................$24.95 M14143 M1 GARAND KITS Almost sold out! All parts but barrel & receiver, and op rod catch & clip latch. Good condition & serviceable. Some parts are new. G.I. walnut handguards included. G.I. walnut stock. Gathered a few more......................$580.00 GRD331 Also have a selected kit – metal parts are personally selected – wood is same as above......................... $610.00 GRD332 7.62 NATO (.308) M1 GARAND KIT All parts but receiver and op rod catch & clip latch – for 7.62 NATO – Stock is exc to new, barrel is rechambered in 7.62 NATO by shortening a G.I. barrel, G.I. handguards are new walnut, system is 1/2" shorter due to NATO Round. Note: These are chambered for 7.62 NATO +.308. The NATO is a slightly deeper chamber. Small lot $580.00 GRD333 Hand select $610.00 GRD334 ADD A NEW .30-06 BARREL FOR $130.00 when you purchase one of our Garand kits (Barrels (GRD157) are regularly $159.95) US Made by old school barrel maker M1D GARAND SNIPER RIFLE KIT A $942.00 Value ! A REALIZED DREAM FOR SARCO & OUR VALUED CUSTOMERS! Convert your M1 Garand into a military grade M1D Sniper Rifle or build your own M1D with our M1D Garand kit which includes a new M1D Barrel with mounted scope Block, Scope ring mount, T37 flash hider, M84 scope with rubber eye piece, Handguard, and leather Cheekpiece. Everything you need, to make the sniper rifle you’ve always wanted. We also include an original M84 data plate for the scope. Bound to satisfy you on the range and increase the value of your rifle too! These parts are normally quite expensive on their own! Barrels are short chambered as per military specs, so make sure a Gunsmith checks the final assembly. Very limited quantity in stock now....................................................................................$649.95 GRD335 Complete kit at an unbelievable price! AVAILABLE AGAIN M14 FULL AUTO PARTS KITS M14 M14 M14 M14 M14 Selector, Pin & Spring Selector Shaft Sear Release Connector Rod Full Auto Selector Lock...............$39.95 M14014 WORLD WAR I & WORLD WAR II PATTERN U.S. LEATHER RIFLE SLINGS These beautiful recreations of the old style leather slings are made to the standard U.S. M1907pattern, as used on all the U.S. military rifles since the turn of the century. These are the proper slings for use on all of the following arms: M1903 Springfields M1 Garand M16 M1917 “Enfields” Military “Trench” Shotguns M14 Made from good quality leather with brass or steel hardware, and marked with proper style WWI or WWII markings and dates; these slings will enhance that special old rifle in your collection. Specify when ordering: 1. WWI Model 1907 Sling (w/brass hardware and WWI date)........................................... SLNG024 2. WWII Model 1907 Sling (w/steel hardware and WWII date) SLNG025 .......................... $16.95 ea., 3 for $47.95 USGI M14 STOCK ASSEMBLY Very good condition M14 walnut stocks with buttplate assembly with shoulder rest and sling mounts. Can still see the National Defense cartouche marking. Some minor dings & blemishes, but overall highly serviceable and the best we’ve had in years! ....................................................................................... $75.00 M14354 K2 These are all of the parts except the receiver for the early model 7.62mm Italian BM59SL rifle. This rifle is essentially a standard M1 Garand semi-automatic that has been modified to use 20 rd. BM59 magazines, and has been chambered for 7.62mm Nato ammunition. It retains the well proven Garand sights, trigger mechanism and gas system, while doing away with the 8 round Garand clip in favor of a 20 round detachable box magazine. These parts sets can be assembled on an M1 Garand receiver which will require a few modifications to accept the new feed system. Parts are in very good condition, bores are nice.....................................................BM59002 $595.00 ea. You can convert a Garand receiver. Set of blue prints for BM59 receiver: With kit.......$29.50 BM59003 Without kit......................................................................................................... $49.50 BM59004 U.S. MADE BARREL! M1 TANKER GARAND BARRELS HAVEN’T BEEN AVAILABLE FOR YEARS! Brand new and made by one of America's premier barrel manufacturers. Parkerized and ready to install. Length 18.25 inches. .30-06........................................$129.95 GRD004 .308......................................................................................................$129.95 GRD336 M1 GARAND ACCESSORY PACK Terrific set of accessories for the Shooter or Reenactor! Made up of both original and reproduction items, the Pack includes the following items: NEW! GARAND GUN CASE GARAND CARTRIDGE BELT MILITARY MANUAL M10 CLEANING SET w/brush CHAMBER BRUSH SNIPER CHEEK PAD 1 QUART OF LSA - MILITARY GUN LUBRICANT CLEANING ROD STOP USGI DUMMY .30 RD 3 EN-BLOC STRIPPER CLIPS M15 G.L. SGT.CASE PULL THRU ROD & CORD ITEM COLLECTOR GARAND PARTS: Winchester, HRA hammer GRD231 ...............................................$40.00 HRA gas cylinder lock screw GRD236 ...............................................$30.00 HRA windage knob GRD237.........$35.00 HRA safety GRD238.....................$40.00 Win. Trigger housing reparked Stripped GRD152....................................$65.00 Milled stock ferrule w/swivel GRD174 ...............................................$40.00 Bullet guide, post war stamped GRD248 ...............................................$10.00 Bullet guide, post war stamped with thumb notch GRD249...............$15.00 ALSO: Your choice of 1907 Leather Sling or Canvas WW2 style sling. Specify when ordering. A Retail Value of over $145.00 For Just… $79.95 GRD329 ***A great gift for a Garand owner!*** GARAND BROKEN SHELL EXTRACTORS Dual use for .308 (7.62x51) and .30-06................................................... $5.95 BSE013 FRONT HALF G.I. M1 GARAND RECEIVER $14.95, 3 for $39.95 GRD143 Neat paper weight! M1D BARREL WITH MOUNTED SCOPE BLOCK Just in, new M1D Garand barrel ready to install and mount your scope. U.S. Mfg! ........................................ $249.00 GRD159 NEW ITEM!! M1D BARREL BLOCK (the base for the barrel) fully machined from solid billet – 100% like the original and to the G.I print $89.95 GRD316 Investment cast M1D barrel block $59.95 GRD113 M1 GARAND CLIPS Current Production By U.S. Government Contractor - GRD275 5 for....................................................... $9.95 10 for...................................................$14.95 20 for...................................................$24.95 40 for...................................................$45.00 Nice fresh spring tension in your clip SPECIAL GARAND CLIPS 1.2 round clip for match shooters.....$8.00 ea, 5 for........................................ $24.95 GRD131 2.5 round hunting clips ................... $8.00 ea, 5 for $24.95 GRD130 COMBO. New Style M3A1 TOOLS WITH CHAMBER BRUSH The Latest and best. A. Used G.I.................... $19.95 GRD134 B. Like new tool w/new brush ................................. $24.95 GRD138 C. Absolutely New G.I. WWII original tool in orig G.I. grease & package (no brush) .................................. $29.95 GRD165 USM82 SNIPER SCOPES FOR THE M1C & M1D & 1903A4 SPRINGFIELD, WWII & KOREAN WAR SNIPER RIFLES Beautiful exact repro with original markings for the Griffin & Howe M1C mount or the M1D scope mount. See info below ............... $399.00 $499.00 SCP040 7/8" diameter tube, crystal clear optics, tapered post reticle, polished blued finish, sliding sun-shade and a rubber eye cup. All of the major components are stamped with military part numbers and the tube is stamped with period serial numbers and stock numbers. Each scope comes factory set to zero/300 yards. Note: We have been able to reduce the price of our M82 scope by $100.00 M1 GARAND BLANK ADAPTER GRD126 U.S. G.I. pattern, new..... $7.95 3 for.........................................$21.95 GRD161 NATO pattern................. $5.95 5 for.........................................$24.95 For bulk pricing on Garand BFA’s call Mark, Dave or Cholly LATE T-37 M1 GARAND SNIPER FLASH HIDER $34.50 GRD111 MI GARAND CLEANING KIT Kit contains M10 cleaning rod, bore brush and a G.I. carrying pouch. CLN064 $17.49 3 for $49.50 Handle for M10 cleaning Rod for Garand Rifle – hard to find $7.95, 3 for $22.50 CLN047 Orig G.I. M10 handles ..........$9.95 GRD281 D2 M1 GARAND PARTS & ACCESSORIES 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com ORIGINAL WW2 ERA GARAND STOCK W/ MARKINGS Finally found some original USGI stocks with good cartouche markings from the manufacturers. The stocks have original markings and although the stocks have some dings and dents, nothing major and in good general condition. May be your last chance to obtain original marked stocks. We have the following markings available. We have posted the serial number range for you to check against your rifle’s serial number. GRD342 GRD343 GRD344 GRD341 S.A. S.A. S.A. S.A. G.A. W. E.McF. J.L.G. N.F.R. #1,860,001- #700,001- #4,200,000- #3,200,0013,200,000 1,860,000 4,350,000 3,890,000 $295.00 $295.00 $295.00 $395.00 (few) ****Note: Add $25 Per stock for special selection of best available. Also have a supply of standard unmarked M1 Garand stocks: Same general condition as our marked stocks, but without markings. Stocks will have some dings and minor dents. Good condition $80.00 GRD024, Average condition $60.00 GRD027 WWII U.S. PATTERN CLEANING ROD CASES WITH WWII STYLE BELT HOOKS These are nice as they have leather straps ing – new – show some storage For M1 Carbine rod................... $12.50 For M1 Garand rod.................... $12.50 Special – 1 of each..................... $21.95 NEW! ITEM & edgCLN117 CLN118 CLN119 LATE PLASTIC WWII OILER—G.I. NEW $13.95 Few Only OIL035 ORIG WWII G.I. M1 GARAND KHAKI CLEANING ROD POUCH New cond. Few only WWII markings. Found in warehouse $14.95 GRD299 PARTS FOR .308 (7.62x51) CAL M1 GARAND ORIGINAL .308 STOCK New and like new............................................. $59.95 3 for................................................. $149.95 GRD028 Front and rear handguard set, new......$37.50 GRD274 ORIGINAL G.I. M1 GARAND BOLTS See our K Page for more Garand parts Stripped........................ $69.95 GRD070 Complete....................... $89.95 GRD071 M1 GARAND & M1 CARBINE GRENADE LAUNCHER SIGHT with pouch. Orig G.I., brand new.......................$9.95 MISC062 G.I. Sight pouch only.......$3.95 MISC262 G.I. Mounting jig for installing base to gun – rare, original....... $40.00 MISC263 WWII M1 GARAND RIFLE LEATHER SCABBARD These leather scabbards were used by horse cavalrymen and truck and jeep drivers. These heavy leather scabbards have the tunnel to cover the operating rod handle and two leather carrying straps with brass hardware. Perfect reproduction. SALE $59.95 each GRD137 Original G.I. new sling keepers for Springfield and Garand 1907 leather slings – buried for years. $5.95 ea, 2 for $9.95 SLNG067 Available Again – Ratchet chamber brushes for the M1 Garand......................$4.95, 3 for............................... $9.95 .30-06 cal TOOL044 1. 2. 3. 4. M1C/M1D SNIPER PARTS M1D rear handguard New G.I. original GRD033................................................. $25.00 T37 flash hider GRD111......................... $34.50 M1D barrel block GRD113...................... $59.95 M1D scope mount GRD112.................... $47.50 Orig. Brass oil & throng set, exc. condition. OIL015 ............................................$35.00 Orig plastic oil & throng set, used exc. condition OIL016 ............................... $8.50 • • • • • • • • • GARAND ACCESSORY KIT Perfect new leather sling Orig. late oiler Orig. combat cleaning throw Cleaning brush Front & rear sight cover 10 – 8 shot clips Orig. WWII accessory pouch Cleaning rod buffer G.I. type carrying case $70.00 value $49.95 GRD172 M1D SCOPE MOUNT Price reduced! Only $47.50 Scope mounts for the M1D Garand Sniper rifle. These are for the 7/8" diameter M81 - M82 - M84 Scope. New condition. GRD112 ORIGINAL G.I. WWII M1 GARAND SLOTTED COMBINATION TOOLS In the original G.I. wrapper. Been buried for 10 years. While the few last - $29.95 TOOL016 A perfect reproduction of the grenade launching rubber boot (slip on) for the Springfield and M1 Garand. Absolutely meticulously beautiful!!.......... $34.50 MISC088 M1 GARAND GAS CYLINDERS U.S. G.I. Gas Cylinders, not foreign made replacement parts. 2A.Serviceable grade, gaged for functionality. Sarco’s Price ONLY GRD096 ......................................... $85.00 each 2B. Refinished, serviceable. $99.95 GRD097 SPECIAL THIS MONTH! Free original G.I. M84 scope data plate with each M84 scope purchase! M84 TELESCOPE SIGHTS FOR THE1903A4 SPRINGFIELD & M1D GARAND SNIPER RIFLES A Mil-Spec reproduction of the original – produced by a company that produced these scopes for a military contract years ago. Used original drawings for the production. Comes with rubber eye shield & date plate. Factory c ............................................. $399.00 GRD260 Add on deals: A. M84 scope with M1D scope mount ............................................. $434.95 GRD261 B. M84 scope with M1D scope mount & scope mount barrel block................ $479.95 GRD262 C. M84 scope with M1D scope mount, barrel block, orig. G.I. new M1D rear handguard, sniper cheek pad & T-37 prong sniper flash hider ............................................. $549.95 GRD263 M84 repro scope buyers from other sources-we have original G.I. unnumbered M84 sccope data plates from Libbey Owen Ford (the manufacturer) NOS..........................................$24.95 M84014 Rubber eyeshield for M84 scope. Current production...........................................$14.95 M84055 Special new low price. GRD124 Exact repro with proper markings $18.95 3 for $49.95 Go to our websites for a complete selection of Garand bolts by maker and dash variation. We have sorted out 13 variations – we even offer heat treat lots for serious collectors. COMPLETE SET OF M1 GARAND STOCK HARDWARE All cleaned up and reparkerized. Buttplate w/screws, rear swivel, stock ferrule & swivel assy $39.95 GRD136 Hardware Set same as above but Not reparkerized… $33.50 GRD213 SPECIAL M1D SNIPER COMBO SET New G.I. Handguard T-37 Flash hider Cheek Pad Barrel Block Scope Mount Value $200.00. GRD145 SPECIAL $149.50 The stocks are new walnut G.I. stocks that were .308 cal & we converted them to .3006. Fit is perfect for .30-06. There is a tiny hairline from the conversion that is visible. Handguards are new production walnut. Complete stock set (wood only)............................ $59.95, 3 for $169.95 GRD278 Quantity purchases, please call Cholly. Will trade on quantities Original USGI unissued Sight, Carry Case, Mounting Elevation Bracket, and instructions from 1944. This sight was used on the Garand, M1 Carbine, and 1903 series Springfield Rifles ................................................. $9.95 MISC062 Or….. Add the original metal Jig used to set the sight correctly on the Springfield and M1 Carbine. Sight set above with the Jig (shown in the picture ). ................................................ $39.95 MISC420 M1 STAINLESS STEEL GARAND OP ROD SPRINGS The Best On The Market! Just got a new fresh shipment made from G.I. blueprints. Replace your tired spring or put away a spare now! Stainless Steel 17-7 ....................................................................$7.45, 3 for $19.95 GRD171 Standard Music Wire Spring............................................................. $5.95, 3 for...................................................................................$14.95 GRD296 GARAND SNIPER LEATHER CHEEKPAD BRAND NEW GARAND STOCK & HANDGUARD SETS IN WALNUT M15 GRENADE LAUNCHER SIGHT SET NEW! ITEM M1 GARAND BRAND NEW BUTTPLATE ASSEMBLY $29.95 GRD220 ‘BLACKOUT BLOWOUT’ ‘300 Blackout ammunition at super savings! 147 grain, full metal jacket. $14.99 box of 20rds. (1 box ) AM156 $69.95 per 100 rds (5 boxes) $124.95 per CASE (200 rds.) RARE M1A2 GRENADE ADAPTER FOR U.S. SERIES OF GRENADE LAUNCHER (ALSO MANY EUROPEAN) New condition.........$24.95, 3 for $69.95 Grenade not included. MISC124 M1 GARAND OPERATING ROD TIPS (pistons) Brand new, made to Government specs. Replace your worn piston diameter .5265” (high end + .0005") Made of the proper 174PH steel........... $9.95, 3 for............................ $22.95 GRD211 .45 LONG COLT: AM152 255 gr, lead cowboy loads. 50 rds/boxq.. $34.99 OR 100 rds............................................. $59.95 .45 ACP: AM153 230 gr, full metal jacket. 50 rds/box....... $19.95 OR 100 rds............................................. $34.95 ALSO... .30 CARBINE: AM149 FMJ, 110 gr., (ARMSCOR) 100 rds.......... $39.95 OR 1000 rds.............................................$349.50 NEW WALNUT FRONT AND REAR HANDGUARD SET With metal ................................ $32.95 GRD051 Without metal ........................... $24.95 GRD210 ORIGINAL WWII GARAND & M1CARBINE G.I. canvas muzzle cover with strap $8.95 MISC047 M1923 (WWII Style) U.S. CARTRIDGE BELTS for M1 Garand The standard 10-pocket with cartridge belt as used during W.W.II to carry .30-06 ammo for the M1 Garand and M1903 Springfield Rifles. Each belt has 10 individual pockets which can hold 2-5 round stripper clips or 1 - M1 Garand 8 rd. clip of ammo. The pocket flaps are secured with typical lift-the-dot fasteners. Belts are adjustable for waist size, and each belt has many metal grommets for attaching G.I. bayonet scabbards or other items of field gear. Nicely marked “US” on the front pocket. Belts are made from heavy webbing, dyed the proper greenish/khaki color. Our belts are in new condition. SPECIAL SALE!!! $19.95 ea. 3 for $54.95 GRD125 tion $46.50 GRD085 .30 CAL BORE BRUSHES Normal .30 cal bronze brushes 10/$9.95, 50/$39.95, 100/$69.95 BRUSH-001 Stainless steel bore brush fur cleaning those tough military bores 5 for $8.95 CLN120 WWII PATTERN WEB SLING Just reproduced for U.S. complete w/ markings. OD with all proper metal fittings – Beautiful. Also proper for Springfield & Enfield $9.95, 3 for $28.45 SLNG057 WORLD WAR II PATTERN M1 GARAND CARRYING CASE WWII military style canvas carrying case for the M1 rifle. These “U.S.” marked cases are made of heavy, olive drab canvas and equipped with a zipper, leather tabs and a shoulder carrying strap. GRD115 ..................... $14.95 ea., 3 for $42.95 Also have some USMC marked covers ....................................... $14.95 GRD347 M1 GARAND BUTTSTOCKS These are original U.S./G.I. walnut stocks, some in especially choice condition. Several grades available (these are the wood butt stocks only, no handguards or metal included). Good to very good condition, has seen some use, but no abuse. Original finish, no cracks, nice walnut, much better than average stocks GRD024............... $110.00 M1C/M1D Sniper Stocks, We found a small lot of sniper stocks mixed in with the excellent condition reworked stocks described above. These sniper stocks have two small screw holes in the bottom of the stock where the sniper cheek pad would have been attached. GRD026 – These stocks are not marked The cheek pads are not on these stocks, just the holes are present GRD026$...........................................................................................145.00 Same stock with open box/SA inspectors mark ZZ2 ............................. $225.00 G.I. butt stock, average used condition, no cracks, might have minor chips on edges GRD027............................................................................................$75.00 M1C/M1D stock as above with arsenal repair, no markings......................$89.50 EMCF stock.................................................................................. $350.00 & up GAW stock.................................................................................... $350.00 & up HRA stock.................................................................................... $225.00 & up Original .308 (7.62 NATO) Garand stock, new G.I......................................$59.95 ORIGINAL NEW G.I. GARAND OP ROD SPRING Found some more in warehouse. $7.50 3/$19.95 GRD059 NATIONAL MATCH REAR SIGHT APERTURE Your choice of .520 or .595 NM aperture. $39.95 GRD089 Also for M14 NM SIGHT & APERTURE BUYERS PLEASE NOTE: The aperture is made slightly oversized to be fit to your sight base. The procedure is simple & instructions are included. See our website for the instructions if you wish. AMMUNITION 38 SUPER: AM148 FMJ, 124 GR., (ARMSCOR) 100 rds .............................................................. $34.95 OR 1000 rds.........................................$299.50 9mm LUGER: AM147 Ball ,FMJ,124 gr. (ARMSCOR) 100 rds .............................................................. $29.95 OR 1000 rds.........................................$249.50 .22 Long Rifle High Velocity: AM154 Lead H.P., (ARMSCOR) 36 gr. 500 rds (brick) .............................................................. $49.00 .50 CAL. BALL AMMUNITION Big blasting action! .50 cal. Ball ammo that has been loaded & reassembled by one of the most respected reloaders in the business! We love their ammo for reliability and cost. We sell this by the .50 cal. Ammo can with 150 rds. In Stock!....$397.00 AM158 NATIONAL MATCH REAR SIGHT BASES FOR M1 GARAND & M14 (M1A) New condi- M1 GARAND OP. RODS Original USGI op rods made in the U.S.A. for use on the Italian Garand. We have had a precision made Stainless Steel 174 P.H. tip made to replace the shorter Italian tip. These rods are proper length for the M1 Garand Rifle and are freshly parkerized and function fit for guaranteed performance. The original M1 Garand op rods are getting EXTREMELY DIFFICULT TO FIND, so please consider this now in order to hedge against the scarcity of this item in the very near future........................$140.00 GRD052 SPARE PIN & SPRING KIT FOR M1 GARAND Clip latch spring Hammer pin Extractor spring Trigger pin & plunger Lower band pin Hammer spring Op rod catch Op rod spring pin Clip latch pin Value over $25 - $12.95 GRD219 .22 cal Magnum 40gr JHP: AM155 500 rds (brick)......................................$150.00 .223 FMJ, 55 gr (ARMSCOR) AM157 100 rds................................................... $34.95 OR 1000 rds.........................................$335.00 223 FMJ, 62 gr: (ARMSCOR) AM159 100 rds................................................... $34.95 OR 1000 rds.........................................$335.00 .308 NATO (7.62 x 51) NEW! ITEM Great deal on 7.62x51 (.308 ball ammunition) New Tula mfg—loose, steel case, berdan, non-corrosive, FMJ AM160 100 rds........................ $41.95, 250 rds........................ $97.50, 500 rds...................... $184.95 ‘PROJECT’ REAR SIGHT FOR PISTOLS Similar to 1911 standard rear sights, this dovetailed rear sight has a width of 1.608", stands .328" high with a 1.20 peep notch that descends .074" into the body. Width of the dovetail is .341" $3.95 ea, or 10 for $30.00, or 50 for $125.00 C45359 FRONT TACTICAL COMBAT SIGHT FOR 1911 FOR DOVETAIL SLIDE 170" height .135 blade width. For standard 1/4" dovetail red highlight on back. SARCO PRICE $4.95, 3 for $9.95 C45140 (Comparable price $19.95) 1911 PISTOL PARTS & ACCESSORIES SUPER SPECIAL All 3 kits of springs, pins & screws above for the 1911 Colt. Sale value is $18.65. Super Sarco Value $14.95 for all 3 sets C45259 Whoaaaa…. Cholly’s Done it Again!!! 1911 Series 80 single stack, single action, full size pistol frames available in either ordnance grade steel or lightweight aluminum! These are finished frames except for several features that are unfinished to comply with BATF directives classifying these as Non-Firearms in their present condition. Slide rails, hammer & sear pin holes, mainspring housing retaining pin, and ejector leg holes remain to be applied. Grip screw holes are drilled and tapped. The frames can be easily modified to Series 70 with the use of a commonly available adapter shim. The Steel frame accepts the ‘Clark©’ type 1911 barrel while the Aluminum frame accepts standard 1911 barrels. A BATF letter of ‘non-firearm’ status, accompanies each order. These are the best quality 80% frames on the market, manufactured by a major 1911 manufacturer! Act now before this small lot is gone! Fits 4.25" slide or smaller. ALUMINUM 80% FRAME......................................................................................................................................................... $125.00 C45328 STEEL 80% FRAME................................................................................................................................................................. $125.00 C45329 ALSO THESE 80% FRAMES JUST IN !!!!! #500649 Extra Small Para Frame for 3" slide. Series 80, aluminum, Double stack, Single action............................................. $125.00 C45331 #500675 Para LDA Officers length grip frame in steel with checkered front grip strap. Accepts 4.25" or smaller slide. Single stack and Double action............................................................................................................................................................... $99.95 3 for $249.95 C45332 #500678 ‘Agent’ extra small steel frame with checkered front strap. Single stack, Double action, and fits 3" slide ........................................................................................................................................................................$99.95 3 for $249.95 C45333 1911 PATTERN SLIDE BONANZA! 1911 PATTERN SLIDES FROM PARA ORDNANCE (SEE COMPLETE DETAILS ON LINE AT E-SARCOINC.COM Sarco’s got em! Over 125 varieties! These include Standard models, Discontinued models, Overruns and Custom Variations. Perfect time to upgrade your Para pistol or build up that 1911 frame! These slides will also allow you to change pistol length, or caliber, or even upgrade your sights! Sarco’s BIG VOLUME purchase, means BIG SAVINGS for you! These slides are premium material ... not rejects or returns; material is the remaining inventory from the Corporate change over from Para Ordnance to Para USA. GUIDANCE FOR YOUR PARA SLIDE PURCHASE All our Para slides are cut for the series 80 type firing pin interlock. Complete slides are built with series 80 parts and a ramped barrel that will fit in 1911 frames that are modified for ramped match barrels. You can build these up to work in standard U.S. G.I. 1911 type (series 70) pistols if you wish, However doing so disables the safety features of the series 80. Striped single action slides will work on any standard series 70 or 80, 1911 frame (series 70 is the standard 1911) when built with the appropriate parts. The Para LDA is a double action slide that will work only on Para LDA frames. You can however cut the disconnector scallop in and use the slide on any standard series 70 or 80 1911 frame. The 6" and 5" slide use standard 1911 recoil spring plugs and barrel bushing. The 4.25" slides use Commander type recoil parts. The 3" and 3.5" slides use a unique recoil mechanism that is available commercially. There are 2 variations of extractors used on these Para slides. The first is the standard type which uses any standard .45 extractor. The second is a PXT type. On this style the forward part of the extractor support rib is slightly larger in diameter. We have read that people have used G.I. extractors as they are the same diameter in the back. PXT extractors or adapter bushings are available from other sources. We will also soon have these available. COMMEMORATIVE PARA SLIDES 5 inch $119.95 PARA095 4-1/4 inch 3-1/2 inch $139.95 PARA041 $119.95 PARA030 3 inch $74.95 PARA001 BACKUP PISTOL OR EASY CONCEALED CARRY? Want a 3", 3.5" or 4" Hi-Cap ‘Snubby’? This may be the only 3” slide on the market!!! We offer a completely finished new slide and one of our wide body frame castings in steel or aluminum for as little as $140.! ‘Way Less’ than the regular price on the slide alone! CHECK OUR WEBSITE FOR SPECIAL PARA SLIDES USED TO COMMEMORATE UNITS OR MILITARY ACTION. LIMITED QUANTITY OF THESE EXCITING SLIDES IN STOCK! PRICING DISCOUNTS - buy 10 slides (any assortment), take 5% off, or 25 slides (any assortment), 10% off, or 50 slides (any assortment), 15% off. WANT MORE ? Call or email Dave at [email protected] or Cholly at [email protected] (610) 250-3960 SPECIAL COMBO DEAL! Pick anyone of our PARA Slides and pair it with one of our Frame castings .... TAKE OFF $10.00! Just got a new shipment of 500 slides and barrels in! We’ve been out for a few months! The last 1000 went quickly so act fast before they run out again! Oth A NICE ASSORTMENT these 8e0rs%mray call eceive rs OF FACTORY CASTINGS C45284 - P12/P13 type, wide body 1911 type double action frame casting. No parts interchange with 1911 C45286 - 1911 type, Single stack double action frame casting. No parts interchange with 1911 C45288 -P12/P13 type double stack single action. Uses most 1911 type parts (see other ad) Alloy light weight frame. C45289 - P14 type double stack double action steel frame. No parts interchange with 1911. C45294 -P14 type, wide body 1911 type steel double action frame casting. These also have the enhancement of a lower accessory rail in front of the trigger guard. No parts interchange with 1911. C45296 -P13 type double stack 1911 .45 frame casting. Uses most 1911 type parts. Alloy light weight frame. No parts interchange with 1911. Special price for all above frame castings..................................................$29.95, Mix or match 4 for.................................................................................. $100.00 Big Buyers call MG Dave or Cholly. We also have other wide body configurations available. No returns on frame castings. C45284 C45286 C45288 C45289 C45294 C45296 SERIOUS ABOUT COMBAT SHOOTING? ROTO 4M COMPENSATED BARREL TRIJICON 1911 REAR SIGHT 2011 production of genuine Trijicon rear sights designed for Para Ordnance style slides. Bottom dove tail width is .360". Use for a custom build, and it will work with a variety of .121" wide & .160" high front Trijicon sights...............................$44.95 ea, or 3 for.............................................$119.95 PARA137 NEW G.I. CLONE ROCK ISLAND ARMORY .45 1911 & 1911A1 BARRELS The rifling is absolutely beautiful and the bore surface is very smooth. Made from ordnance steel........... $49.95, 3 for.....................$143.50 C45202 .45 SLIDE CASTINGS Colt 1911/1911A1 .45 ACP Slide Castings We have 3 size castings. These are in the white and require machining to finish. — 3" barrel sub compact C45293 — 3.5" barrel sub compact C45292 — 4" barrel compact C45291 — 5" barrel full size C45290 Your choice and mix or match the length $14.95, 10 for $120.00, 50 for $500.00 DOD contractors have been buying up our Roto 4M barrels because they work! MODEL 1911 COMPENSATED BARRELS in 2 calibers will reduce recoil and speed your target acquisition especially during multiple shots. Takes a minute to install our barrel that comes with Barrel Bushing and permanently attached and ported Compensator. Also there is less weight on the muzzle end than with conventional screw on muzzle compensators. Most people comment on the change of performance, but also that it looks great too! Sold elsewhere for $175-$200, Sarco’s price is $99.95 Specify caliber when ordering: New, made in USA. .38 caliber C45024, .400 corbon C45194 E2 THREADED 1911 BARRELS 5-1/2 Inch Brand new black oxide finished barrels in 3 calibers. Thread is standard .578x28 TPI. 9mm Model 1911 5-1/2” barrel ..............................$60.00 C45360 .38 Super Model 1911 5-1/2” barrel ..............................$60.00 C45361 .400 Corbon Model 1911 5-1/2” barrel...........................$60.00 C45362 .45 ACP model 1911, 5.5” barrel .............................. $60.00 C45321 THREADED PROTECTION CAP FOR THREADED BARRELS Side Note: Threaded protection caps for threaded barrels are used to protect barrel threads when not using a suppressor or muzzle break. Barrels with .578x28 threads per inch........................$13.00 C45363 STILL LOWER PRICES ON ALL .45 AUTO KITS .45 AUTO “BUILDERS KITS” Put together your own .45 “Government” pistol with our Builder Kits. Several different kits available to best fit your needs. Our parts are standard M1911A1/Pre-’70 Government type. Price List: #1.Builders Kit - All parts in the gun less frame and slide $149.95 or 3 for $429.95 C45095 #2.Builders Kit – All parts in the gun less frame, slide,and barrel.$119.95 C45096 #3.Kit - All parts in the gun less frame. Kit includes one of our new current manufacture G.I. type slide (unmarked) C45097 $229.95 (Regular value $300) C45218 - Builders Kit with Commercial Slide $254.95 Compare our prices and see how much you’ll save compared to the competition! Note: All gun parts may require some fitting and technical knowledge for assembly. If you are not knowledgeable seek professional assistance. BEST QUALITY COMMERCIAL .45 SLIDES o Special wide angled front and rear cocking serrations – for easy grasping o Nice subdued blue finish with sand blasted inner serrations o Lowered & beveled ejection port o Unmarked slide o With desirable snag-free rear sight o Free sight set ($20 value) All this for only..................................................$139.95 C45172 Note: Due to variations we have seen in frames & parts, slight fitting of ejectors & extractors may be necessary OUR NEW G.I STYLE 1911 GOVT. MODEL SLIDE Current production compete with both G.I. sights installed. ($15 value) Made with improved beveled ejecting port.................................................................................... $124.95 C45160 PARA LDA SLIDES Brand new precision engineered PARA light double action slides with Trijicon front and rear sights installed are now available at Sarco. We offer one for the 3 inch 9mm ‘PARA LDS CARRY 9’, and one for the 3.5” 9mm ‘PARA LDS OFFICER 9’ pistols. Beautifully finished in a dark gray Physical Vapor Deposition (PVD) finish. Wide rear serrations on the slide ensure an easy grip and the pronounced Trijicon sights ensure the fastest eye ‘line up’ to target. The value of this package is astounding as the market price on the sights is almost the same as the cost of the stripped slide! In this package, it’s like you are getting the slide for free! 1. 9mm Para LDA Officer 9 Slide w/sights ........................................ $159.95 PARA154 2. 9mm Para LDA Carry 9 Slide w/sights ........................................ $159.95 PARA159 *Specify the 3 inch or the 3.5 inch slide when ordering. www.e-sarcoinc.com 610.250.3960 COMPLETE 1911 .45 SLIDE KIT (All Parts For Slide) A complete set of the top half of a .45 Government model. Kit includes one of our new current manufacture slides (unmarked), barrel, firing pin, recoil spring parts, sights, extractor, link & pin, band bushng. Over $198.00 worth of parts for only..................................................................................$174.50 C45092 Complete upper commercial slide kit for.......................................................$184.95 C45200 Our commercial slide set also available with one of our compensated barrel assy. for ........................................................................................................................... $229.95 C45093 OUTSTANDING ASSORTMENT OF QUALITY 1911 BARRELS ROTO 4M HAMMER FORGED .45 ACP, 9MM & .38 SUPER Built to precise tolerance by a special hammer forging process, these barrels are the best you can buy! The hammer forging forms the barrel around a precision mandrel and holds the tolerance to .0001". This is much better than the typical broached barrels found elsewhere Note: 5" & 6" .45 barrels are L.H. twist – all others are R.H. twisted COMPARE THE ROTO-4M BARREL FOR ROUNDNESS AGAINST A STANDARD BROACHED BARREL FROM A WELL KNOWN MANUFACTURER. ALL ROTO-4M BARRELS ARE MADE IN THE USA. Brand new extra length barrels for all Colt/1911/Government Model type automatic pistols. These barrels are made by the Special Roto-4M Hammer forge process which produces the most precise and consistent barrels for the best accuracy. Minor hand fitting may be necessary for some guns. Barrels do not include link & pin. Link & pin available w/barrel purchase for additional $5.00 C45281 Available in: .400 Corbon Barrels 41/4" Commander $53.70 C45105 6" $58.70 C45104 STD 5" $53.70 C45025 .45 ACP 41/4" Comm.$51.70 C45010 5"......... $51.70 C45011 6"......... $59.70 C45013 7"......... $61.70 C45014 16"....... $79.50 C45016 .38 SUPER 5".....$51.70 6".....$58.70 7".....$62.70 41/4" Comm ....$51.70 .40 S&W 1911 5" barrel C45277 $53.70 9MM LUGER C45017 C45009 C45018 C45164 41/4" Comm $53.70 C45163 5" $53.70 C45019 6" $58.70 C45020 7" $62.70 C45021 Note: 9mm & .38’s will not fit the .45 slide 9MM SINGLE ACTION 3 INCH SLIDE W/ TRIJICON SIGHT Para 1911 single action slide with PVD finish , front sight slot cut, and a Trijicon Wedge rear sight installed. Originally designed for the LDA Carry 9mm pistol, but modified to work with all 1911 single action frames. Accepts standard 1911 extractors. ........................................................................$139.95 PARA177 9MM SINGLE ACTION 3 INCH SLIDE Para 1911 Single Action slide with PVD finish, front & rear sight cutouts, wide rear serrations and accepts standard 1911 extractors. Originally made for the Para LDA Carry 9mm, but modified to work with all 1911 single action frames. ............................................................................................................................... $119.95 PARA176 STAINLESS STEEL 1911 PARTS C45038 Recoil spring guide (matt finish) Commander..................$3.50 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com .45 ACP PROJECT BARREL Nice 6 inch .965 OD chambered barrel blank for your next project $19.95 MISC276 8 ROUND .45 MAGAZINE New, blued steel magazine for all .45 ACP Government Model/M1911 type pistols. Base plate also acts as finger rest to improve your grip on the gun. ................................ $16.95 ea. RPM122 WIDE SPUR HAMMER Desirable M1911 type checkered wide spur hammers for the Colt .45 auto pistol. These are new, ready to install and upgrade your pistol. Heavily checkered (not grooved) wide spur provides a sure grip when thumb cocking or decocking. $12.50 C45054 (Comparable price $23.00) Note: These are due in a month. Send order and get on the list For Colt mfg barrels, see our website. .45 ACCURACY KIT Upgrade your .45 Auto pistol and improve your score with our Accuracy Kit. medium steel. Adj. Trigger for smooth crisp trigger pull, a No. 13 match barrel link to tighten up the barrel in the slide at the moment of firing, a high speed recoil spring and a high speed firing pin spring. SPECIAL KIT PRICE $13.95 C45089 .45 AUTO FRAME KIT All parts to build a 1911A1 frame (except the frame itself). Includes trigger, hammer, grips, sear, mainspring, safety, etc., etc., (no slide stop). $89.95 ea. C45099 M1911 “DIAMOND” GRIPS These brand new walnut grips are made in the original World War I style with the “Diamond” pattern checkering. Give your 45 Auto the classic look and feel of the original Colt 1911 design. $13.95/pr. 3/$36.50 GRP162 FOUND IN WAREHOUSE!! ORIGINAL WWII G.I. COLT .45 AUTO COMPOSITION GRIPS These were long ago taken off G.I. 1911A1’s – when the guns were demilled. V.G. excellent condition. $14.95 GRP131 3 HOLE LIGHTENED COLT 1911 LONG TRIGGERS SPECIAL RUN trigger pad is serrated for good contact ....................$12.95, 3 for................................$36.50 C45173 1911 .45 AUTO PISTOL PARTS C45095 Auto Builders Kit (Less Frame & Slide)........................ $149.95 C45097 Auto Builders Kit (Less Frame).................................... $229.95 C45096 A uto Builders Kit (Less Frame, Slide & Barrel)................................... $119.95 C45218 Builders Kit w/ Commercial Slide....................................... $225.00 C45099 Frame Kit..................................$89.95 C45089 Accuracy Kit..............................$13.95 C45091 Auto Repair Parts Kit.................$22.50 C45017 Barrel, 5", Roto, .38...................$49.70 C45019 Barrel, 5", Roto, 9mm................$51.70 C45009 Barrel, 6", Roto, .38...................$56.70 C45020 Barrel, 6", Roto, 9mm................$56.70 C45021 Barrel, 7", Roto, 9mm................$60.70 C45018 Barrel, 7", Roto, .38...................$60.70 C45016 Barrel, 16", Roto........................$76.50 C45011 Barrel, 5", Roto, .45...................$48.70 C45025 Barrel, 5", Roto, 400 Cor-Bon....$51.70 C45013 Barrel, 6", Roto, .45...................$56.70 C45014 Barrel, 7", Roto, .45...................$58.70 C45010 Barrel, Commander, Roto, .45....$48.70 C45015 Barrel, Roto .45 w/ Compensator .................................................$99.95 C45024 Barrel, Roto, .38, w/ Compensator .................................................$99.95 C45040 Barrel Bushing............................ $6.50 C45087 Barrel Bushing Wear Gauge, ................................................Sold Out C45085 Barrel Bushing Wrench................ $2.95 C45026 Barrel Link Pin............................ $1.00 C45028 Barrel Link, #13, NM......................$8.95 C45027 Barrel Link, Std........................... $4.95 C45098 .45 Cal. Bore Brush..................... $1.25 C45251 Colt 1911 Cleaning Rod M4......... $6.95 C45045 Disconnector............................... $7.50 C45299 Ambidextrous slide stop matte finish........................................................................... $12.95 C45150 Reverse recoil spring plug...............................................................................................$6.95 C45312 Hammer pin...................................................................................................................$2.00 C45313 Mag catch lock...............................................................................................................$3.00 C45314 Mainspring Housing pin.................................................................................................$2.00 NICKEL .45 PARTS 1911 C45315 Slide stop.................................................................................................................... $15.00 C45316 Barrel bushing...............................................................................................................$8.50 4 PRONG SEAR SPRINGS FOR THE 1911 NEW, ARMSCOR… Once again available. The normal spring acts on the sear, disconnector & grip safety. This spring acts on the trigger as well to tighten up any slop. A great innovation. Spring exerts constant forward pressure on the trigger for nice crisp trigger & prevents hammer and sear notch damage and hammer follow on.................... $5.95, 3 for................................. $14.95 C45168 .45 FLAT MAINSPRING HOUSINGS Brand new, flat (M1911 Style) steel housings, grooves nicely for a sure grip. Matte gray/black finish. These are nice! $13.50 ea., 3 for $37.50 C45082 WIDE BEAUTIFUL GRIP SAFETY FOR 1911 .45 AUTO Stop the pinch in the web of your hand (I used to get bloody) $16.50, 3 for $49.95 C45079 (Note: These are for short rear tang frame. You can fit them to Std. frame) .45 Recoil Springs for the 1911 pistol rated at 16lbs.................$4.95 C45326 Mag Catch for wide body 1911 frames. Comes with release and spring ................................... $16.95 C45327 SPECIAL .45 COLT AUTO REPAIR PARTS KIT Containing the following parts: 4 grip screws, 2 grip screw escutcheons, 2 mainsprings, plunger tube spring, sear spring, 2 ejector pins, 2 mag. catch springs, 1 firing pin stop, 2 firing pin springs, 4 hammer strut pins, 2 firing pins, 2 mainspring housing pins, 1 recoil spring. Regular $37.00 SPECIAL........................$22.50 C45091 .45 1911 ORIG. SEAR SPRINGS Another find in the warehouse — while the few last. $5.95ea., 3 for $14.95 C45319 OUR NEW COLLECTION OF 1911 TRIGGER STEEL & LIGHT WEIGHT C45064 C45175 C45149 C45174 C45066 C45137 C45065 Long aluminum adjustable .................................................. $11.95, Long aluminum non-adjustable............................................ $11.95, Long steel adjustable ........................................................... $11.95, Long steel non-adjustable .................................................... $11.95, Medium aluminum adjustable ............................................. $11.95, Medium aluminum non-adjustable ...................................... $11.95, Medium steel adjustable.....................$11.95, 3/$32.50 3/$32.50 3/$32.50 3/$32.50 3/$32.50 3/$32.50 3/$32.50 Note: All triggers have serrated face for solid finger contact. The medium length is a perfect compromise as the short and long triggers don’t fit all hands. Shoe length is 5⁄16". Comparable price $18.00 or more. PISTOL & RIFLE STRIPPER CLIPS EA. 3 for 10 for STC003 Carcano – (light rust but works fine - Last of ‘em!) $4.95 STC005 AR15/M16 Guide $1.50$3.50 $9.95 STC008 Steyr ‘95 Rifle $3.95 $11.00$30.00 STC009 6.5 Dutch Rifle $4.00 $11.00$39.95 STC010 Enfield .303 $3.00 STC011 Steyr Hahn 9mm Auto $3.00$8.00 $20.00 STC014 Mosin Nagant $2.50 $5.00 $16.95 STC016M14 7 for $9.95 STC020 Swedish Mauser N/A $4.00$10.00 STC025 1903 Springfield, Brass, Original $4.00 $10.00$30.00 STC029 1891 & 1909 Argentine $1.50 $3.25 $9.00 STC031 Mannlicher 7.65 pistol $6.50 $18.00 $49.95 STC013 ‘98 Mauser steel stripper clip $2.00 N/AN/A STC018 ’93 Mauser brass stripper clips $3.00$8.00 $20.00 STC028 Orig. ’98 Mauser brass stripper clips, never seen before. Few only $3.00 ea. STC033Replacement Mauser C-96 Broomhandle 8rd original military N/AN/A $10.00 STC006 Rare 1896 Mannlicher stripper clips $24.95 $59.95 STC024 SKS stripper clip $1.00$2.95 $7.95 SARCO’S MODEL 1911 .45 AUTO MAGAZINES Extensively tested and perform as well if not better than Government mags ! Purchasing in high volume allows us to offer the best price around. For use in all Govt.& Commercial 1911 , 1911A1, Govt. series 70 & 80, Commander, Essex, Rock Island etc. pistols....... $8.95 each or 10 for............... $74.95 C45298 SARCO SPECIAL Two of our famous 1911 .45 mags plus a web mag pouch (below) for only........$20.95, 2 sets for.....$39.95 C45310 STC032 Fine workable stripper clips for Jap type 99 & 38 5/$9.95, 10/$14.95 Note: all above stripper clips are original except 91/30 1911 .45 AUTO MAGS Only $8.95, 10 for $74.95 C45298. This is is half the price of most reasonable .45 mags! See our website for more details! C45068 Ejector......................................... $4.75 C45067 Ejector Pin................................... $1.00 C45030 Extractor...................................$12.00 C45044 Firing Pin..................................... $4.95 C45301 Just in the door! Series 80, 9mm & .38 Super firing pins– Now available for 1911 pistols........................................ $5.95, 3 for............................................ 14.95 C45029 Firing Pin Spring......................... $1.75 C45043 Firing Pin Stop............................. $4.25 C45032 Front Sight A1............................. $5.00 C45079 Grip Safety, Wide Extended Black (Note: These are for short rear tang frame. You can fit them to Std. frame) .................................................$16.50 C45078 Grip Safety, Long Tang .................................................$12.00 C45151 Grip screws, Stainless Steel, 4 for ................................................... $5.95 C45073 Grip Screw Bushing..................... $1.00 GRP131 Grip Set, Plastic, GI, exc. .................................................$14.95 GRP162 Grip Walnut, Diamond Style, new ..................................................... $13.95 C45052 Hammer Pin................................ $1.00 C45056 Hammer Strut............................. $3.50 C45055 Hammer Strut Pin....................... $1.00 C45053 Hammer, Regular Spur................ $9.95 C45054 Hammer, Wide Spur...................$12.50 C45060 Mag Catch................................... $6.95 C45061 Mag Catch Extended.................... $9.95 C45327 Mag Catch Wide Body, Armscor .................................................$16.95 C45062 Mag Catch Lock........................... $2.00 C45063 Mag Catch Spring........................ $1.00 C45094 Magazine Pouch........................... $7.95 C45047 Main Spring................................. $2.00 C45084 Main Spring Cap.......................... $1.25 DOUBLE MAG POUCHES FOR COLT 1911 .45 Exact repro with WWII markings. We had these 2 years ago but got lost in the warehouse....................... $4.95, 3 for........................ $11.95 C45280 C45083 Main Spring Cap Pin.................... $1.00 C45059 Main Spring Housing Retainer Pin ................................................... $1.40 C45082 Main Spring Housing, Flat (Checkered) .................................................$13.50 C45145 Main Spring Housing Flat & Grooved, Composite..................... $8.75 C45171 Main Spring Housing, Steel w/loop .................................................$16.50 C45050 Main Spring Retainer................... $1.00 C45049 Main Spring, for Alum.Frame ................................................... $1.25 C45001 Rear Sight................................... $4.75 C45326 Recoil Spring, Armscor................ $4.95 C45036 Recoil Spring, Standard............... $2.75 C45037 Recoil Spring Guide..................... $4.65 C45038 Recoil Spring Guide, Commander ................................................... $3.50 C45034 Recoil Spring Plug........................ $4.00 C45232 Recoil Spring Plug G.I. New .................................................$14.95 C45126 Recoil Spring, High Speed............ $3.95 C45138 Reverse Recoil Spring Plug........... $7.50 C45074 Safety Plunger............................. $1.45 C45075 Safety Plunger Spring.................. $1.75 C45086 Screw Driver & Take Down Tool ................................................... $4.95 C45058 Sear............................................. $8.50 C45057 Sear Pin....................................... $1.00 C45051 Sear Spring.................................. $3.95 C45111 Sight Set, Battle Combat............$14.95 C45092 Slide Kit.................................. $168.95 C45076 Slide Stop Plunger....................... $1.45 C45003 Slide Stop, Standard..................$12.00 C45002 Spring Kit.................................... $7.75 C45046 Thumb Safety............................$10.00 C45173 Trigger Alum 3 Hole...................$12.95 C45064 Trigger Long Alum Adj...............$11.95 C45175 Trigger Long Alum Non-Adj........$11.95 MORE 1911 PARTS & ACCESSORIES .45 1911 SKELETON HAMMERS Available again and at a special price - Others get $50 to $75 for these. Could require very minor fitting to some grip safeties due to the variations in manufacture of NEW grip safeties.Our Price $14.95, ITEM! 3 for $36.95 C45256 MODEL 1911 SCREWDRIVER & TAKE DOWN TOOL Original WW2 era tool for the Model 1911 pistol. Handy and very compact in size. Issued from WW1 on, these tools were originally part of the 1912 Squad Cleaning Kit. VG/ Exc. condition ......................................... $4.95 C45086 We have a few with manufacture markings like ‘Stanley’ and ‘Metlglas’. Specify mfg when ordering $9.95 ea. C45320 COLT 1911 STEEL MAINSPRING HOUSING w/LANYARD LOOP Housing is grooved for a sure grip 1911A style - nicely blued $16.50, 3 for $47.50 C45171 ORIGINAL NEW 6in SLIDE 1911 RECOIL SPRINGS Can also cut to length for 5" 9mm guns 9mm.$3.95ea or 10/$24.95 Para150 .45 ACP $3.95ea or 10/$24.95 Para151 BACK AGAIN AFTER BEING OUT OF STOCK. 1911 COLT HIGH SPEED RECOIL SPRINGS Great story: Our spring maker is a gun buff. He tried one of these springs in his 1911 and had to call us to tell us how great it is. Our first overwhelmed customer on this product. ..................................................$3.95, 3 for...........................................$8.45, 10 for........................... $22.95 C45126 HIGH QUALITY 10 ROUND .45 1911 MAG .45 single stack magazines for 1911 Colt Special...................$19.95 ea, 3 for........................$49.95 RPM127 ORIGINAL BROLIN 1911 MAGS C45238 7RD for detachable bottom weight with orange composite trough follower..................................$24.95 RPM158 7RD Brolin marked mag ...................................$19.95 RPM283 8RD Brolin marked with composite floorplate.....................$24.95 F2 BRONZE .45 CAL. CLEANING BRUSHES 5 for $4.85 C45098 1911 combat sight set millet rear sight plus (tactical) wide blade front with 1/4" dovetail red highlight Retail value $62.00. Sarco Special $19.95/set, 3 sets for $42.50 C45177 MILLET MARK I Combat High Profile Rear White Outline Sights Fits Colt 1911 dovetail. White outline gives clear sight picture. Retail value $22.75. C45131 Sarco Special $9.95, 3 for $24.95 Full pin set for Colt .45 NEW! Auto. All seven pins for the ITEM M1911. New $4.85/ set, 10 sets for $38.50, 100 sets for $285.00 C45195 Just in the door! NEW .40 S&W, 9MM & .38 SUPER ITEM! FIRING PINS – Now available for 1911 pistols......................... $5.95, 3 for..............................14.95 C45301 Will fit both 70 Series and Series 80 pistols .45 BARREL BUSHING WRENCH $2.95 Free Bonus – Other end is an M16 shorty buttstock installation wrench TOOL031 .45 AUTO SPRING KIT One each of all 6 springs in a Colt .45. A $13.25 value for only. Includes sear spring $7.75 ea. C45002, 10 sets for $65.00, 100 sets for $450.00 SUPER SPECIAL All 3 kits of springs, pins & screws above for the 1911 Colt. Sale value is $18.65. Super Sarco Value $14.95 for all 3 sets C45259 FRONT TACTICAL COMBAT SIGHT FOR 1911 FOR DOVETAIL SLIDE 170" height .135 blade width. For standard 1/4" dovetail red highlight on back. SARCO PRICE $4.95, 3 for $9.95 C45140 (Comparable price $19.95) NEW VARIATIONS OF OUR 1911 .45 ACP MAGS - JUST IN THE DOOR Stainless steel magazines .......................................$10.95, 3 for.................... $29.95 RPM121 G.I. marked 1911 magazine marked .45 ACP #1005-00-8694 MFR8R320. $10.95, 3 for$29.95 RPM155 WWI PATTERN .45 1911 MAGS WITH LANYARD LOOP ............$12.95 ea. OR buy 3 mags for..$36.95 and get a free pistol lanyard for the mags! C45295 U.S. PREMIUM GRADE HOLSTERS Sarco offers a long line of standard grade quality holsters which can be found in this ad on the ‘Y’ page. We also offer some exceptionally tanned U.S. Military historic holsters for presentation grade pistols. The finish and crisp embossing are superior to our standard line and are still affordably priced. Beautiful quality holsters for your top grade pistols! A) 1916 Hip Holster (Right Hand & Left Hand Available) Model 1911 hip holster in original WW2 color of russet brown w/ leg strap. Right Hand draw:........................................$35.00 HOL106 Left Hand draw:....................................................................................$35.00 HOL071 B) 1917 S&W .45 REVOLVER HOLSTER (Left & Right) Butt back model in russet for the right hip with leg strap......................$35.00 HOL101 Butt forward model for right hip with left hand draw. Can be used on left hip for left hand draw too......................................................................................$35.00 HOL102 C) 1912 Cavalry Holster ( Right & Left Hand Available) Long drop cavalry holster for the Model 1911 pistol in the WW2 russet brown color with leg strap. Right Hand draw..................................................................................$35.00 HOL099 Left Hand draw.....................................................................................$35.00 HOL070 D) Victory Model S&W Revolver Holster (Right Hand) WW2 russet brown color.......................................................................$35.00 HOL107 E) Colt 1892 & S&W 1902 .38 Revolver Holster Original russet color with brass ring at bottom. Made for the standard 5" barrel. Commonly called the M1905 holster.....................................................$35.00 HOL103 C45149 C45174 C45066 C45137 Trigger Long Steel Adj................$11.95 Trigger Long Steel Non-Adj .................................................$11.95 Trigger Med Alum Adj................$11.95 Trigger Med Alum Non-Adj .................................................$11.95 C45065 C45148 C45077 Trigger Med Steel Adj .................................................$11.95 Trigger Med Steel Non-Adj .................................................$11.95 Tube Slide Stop & Safety Plunger ................................................... $4.95 U.S. MILITARY FLECHETTES PACK Historically used through the ages for defense, these 1 inch long Flechette Darts were thoughtfully saved from Beehive munitions. Since we have a limited supply, we are offering you a 2 oz. pack which holds about 100 flechettes $7.00/2oz pack (100+pcs) MISC288 Save BIG when you buy a POUND!! 1 LB/$24.95 MISC307 GUNSTOCK FURNISHINGS M1 GARAND WALNUT BAR STOOL STOCK PROJECT M1 Garand Walnut Stocks for that special project! Outstanding value in original ‘new’ old stock walnut Garand stocks that have had the front ends cut and flattened by about an inch or so for a furniture contract that never got off the ground. You benefit because we want to move them and Cholly’s got a friendly price in hand. These stocks are really beautiful and still have military cartouche markings on them and a smooth walnut finish. Great for making project furniture. These pictured items are just some of the great ideas you can try! Stocks are approximately 28 inches long. 1 Stock $10.00 4 Stocks $29.95 8 Stocks $49.95 11 Stocks $69.95 100 Stocks $399.00 GRD339 *For even larger quantities, we’ve got you covered…. Call Mark, Dave or Cholly for Big quantity pricing! 1903 SPRINGFIELD BAR STOOL STOCKS Here is a neat Sprin project for gfi Bar S eld the home to Stock ol handyman. s We have a big pile of unissued condition G.I. 1903 Springfield walnut stocks that were modified years ago to make into bar stools! Ouch! What a waste of good stocks! The stocks were shortened and notched to hold a seat and foot rest ring (not included). The fellow who was doing this went out of business and we bought all of his stock legs. To illustrate the concept we have made up a simple bar stool so you can see the possibilities. It is a shame he cut the stocks, as they were new, unissued G.I. 1903 stocks, but his loss can be your gain. Add a swivel seat of your choice to the top. All stocks have been precut and drilled. You have to make 2 circular or octagonal spacers........................................................................... $39.95/set of 4 SPF124 UNBELIEVABLE SPECIAL CLOSE OUT PRICE!! SUIT OF MEDIEVAL ARMOR (FULL SIZE!) Full sized set made from 20 gauge steel , complete with stand!. Stands over 6 feet tall and when on it’s base, 80" tall! Comes complete with helmet, skirt, and battle sword. A quality set of armor which will be eye candy to anyone who comes in your store! We purchased in bulk so compare at current WW2 BRITISH COMMO WEALTH market retail of $2400 HELMET W/ AUSTRALIAN $5,000! EMBLEM Well-made steel British style helmet with 1st pattern spring loaded canvas chinstrap. The famed Australian 6th Division emblem is adorned on the left side ....................$32.95 HLM027 .50 CAL INERT AMMUNITION FOR DISPLAY Finally back in stock and cleaner & brighter than ever, this inert ammo looks great as the cases and projectiles are polished brass & copper. No holes drilled in the cases and the expended primers are still intact. Perfect for displays, military aircraft, or vehicles! Each round...................$2.50 AM019 Belt of 10 rds., linked.$22.00 AM161 Belt of 50 rds., linked.$95.00 AM162 (Be sure to comply with your State or Local regulations in the few States where they apply, when buying linked inert ammo) Quantity is very limited so act quickly. Some assembly required. $695.00 each MISC401 HANDSOME PRE WWI MODEL MILITARY GERMAN HELMET 1889 PRUSSIAN KURASSIER, PICKELHAUBE Helmet made from steel with leather liner, brass scalloped chinstrap, cockades, steel spike and brass emblem. Inscription embossed on brass emblem translates from German as, ‘With God for Kind and Fatherland’. (Mit Gott Fur Koenig und Vaterland) ..........$84.95 HLM012 BRITISH PATTERN ‘SAM BROWN’ BELT SET Ruggedly crafted with strong leather, saddle stitching, and solid brass hardware, this SAM BROWN BELT is as good as it gets for military or police duty. Has sword connecting rings too ! We have two colors: Black or Brown. Additionally we can offer the brown belt set with a British Webley holster as used a century ago. BLACK “SAM BROWN” BELT $44.95 MISC389BLK BROWN “SAM BROWN” BELT $44.95 MISC389-BRN BROWN “SAM BROWN” SET W/ WEBLEY HOLSTER $54.95 MISC390 H2 Phones Open: Mon Fri, 8:30am – 5:00pm Showroom Open: Monday - Saturday, 10:00am – 5:00pm, Friday til 8:00pm MACHINE GUN CLOTH BELTS AND LINKS Elsa’s made some new deals to keep your guns rockin with our Browning 1919A4 CLOTH BELTS which work with .30-06, 8mm, & .308. 100 Rd. length. $14.95 ea.or 5 for $54.95 A4276 JUST IN! 200 RD BROWNING CLOTH BELT $18.00 ea or 5/$67.95 A4279 .308 Browning Links – Great for 1919A4s in .308/7.62 caliber! Original Israeli links which are reusable over and over again. A4115 1000 pcs. $70 2000 pcs. $134 ($67 per thousand) 3000-9000 pcs ($65 per thousand) 10,000 pcs ($60 per thousand) 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com #4 MK1 Rifle Magazine .303, 10 rd. capacity and broad arrow marked. We’ve worked on having these made accurately for over 2 years of development & testing. Exactly like the WW2 issue magazine! Extremely difficult to find on the market and we’ve been very challenged to keep originals in stock. Now all of our hard work to bring these to you can pay off and at an unbeatable price! $29.95 each, 3 for $84.95, 10 for $229.95 RM61 NEW! ITEM ENFIELD PARTS & ACCESSORIES RARE STOCK SET (stock, forend & HG’s) for #4 MKII Enfield (trigger on the receiver) – New condition. Need to stain to match. Without cross bolt.... $140.00 LE4074 #4 MKII Stock Set, used w/o cross bolt ............................................................ $109.95 #4 Standard Enfield Stock Set, used........$99.95 ENFIELD RIFLE KHAKI RIFLE CASE Made from heavy canvas material, this gun case was used for Enfield #1 MKIII & #1 MKIV rifles. Will fit many other rifles. Includes khaki sling!......... $16.95 LE3092 Complete set of #1 MKlll stock hardware– buttplate, swivels, forend collar assembly, bands, nose cap, rear sight protector, stock bolt and all related parts. 27 parts $48.50 LE3094 See our website for complete list of parts in kit #1 MKIII & # 4 ENFIELD SPECIAL ITEMS LE3074 Brand new original G.I. Buttstock #1 MKIII.............................................$19.95 LE3075 #1 MKIII complete Safety Assy............$16.50 LE3078 #1 MKIII Original brass buttplate.......$14.95 LE3076 #1 MKIII Enfield .22 LR cal bolts, complete super rare........................ $100.00 LE4063 #4 MKI complete Safety Assy..............$16.50 LE4077 Original #4 Enfield brass buttplate VG.$14.95 LE4004 #4 Bolt head size # 1, new orig...........$24.95 3 for...................................................$64.95 LE4005 Bolt head for # 4 Enfield, new standard ............................................................$13.50 LE4062 Original pull thru field cleaning device, new......................................... $2.95, 3 for..................................................... $6.95 LE5001 # 5 Complete buttstock assy for jungle carbine –current production Includes buttplate assembly ........................................................... $39.95 MISC196Original Extractors for the .308 (7.62mm Nato) cal #1 MKIII Enfield – These are called the model 2A.........................$19.95 LE4096 Original Israeli # 4 Enfield scope rings for the brass Israeli #32 scope for the Israeli #4 Enfield sniper rifle (few only).. $59.95/set LE4010 # 4 Enfield striker (firing pin) new original factory........................................... $17.50 LE4104 #4 Enfield L shaped battle sight.......$8.00 LE4079 #4 Enfield stock & handguards set, used ..................................................... $99.95 LE3049 # 1 MKIII Enfield striker (firing pin) new original factory.............................. $17.50 LE4014 # 4 Enfield complete bolt............... $90.00 LE3064 # 1 MKIII Enfield complete bolt...... $69.95 RM57 Just a couple - .45-70 magazine for Navy Arms .45-70 Enfield...................... $85.00 LE4013 #4 Enfield extractor spring...............$7.85 LE3095 Rare long Lee and Lee Medford sliding dust cover, few only.............................$100.00 LE3059 #1 MKIII Enfield extractor spring.. $10.00 THE NO. 4 ENFIELD TARGET/ MATCH SIGHTS These sights were made by the famous British gun maker. Parker-Hale, for use on a high power military target or sniper rifle. • Long range vernier micrometer sight • Adjustments up to 1300 meters •M icrometer click adjustments for windage • Windage scale plate for possible adaptation This has got to be one of the most outstanding Enfield No. 4 micrometer target sights ever offered. TO INSTALL THIS SIGHT ON YOUR #4 ENFIELD. TWO SIMPLE OPERATIONS ARE NEEDED. Full and clear instructions are included for the installation of this sight on your fine Enfield rifle. We could have charged $100 to $125 for this fine sight, but we’ll offer it now at only ................................................. $49.95 PH007 ORIGINALLY HAD 4,000 PIECES, NOW WE’RE ALMOST SOLD OUT!! FULL ENSEMBLE/ENFIELD #32 MK1 SNIPER SCOPE Outstanding detailed steel reproduction telescope used on the Lee Enfield sniper rifle. Ruggedly built , it has a sliding eyeshade, drum adjustments w/ distinctive and solid clicking allowing for deflection of 16 minutes of angle left or right, as well as elevation settings at 2 minutes of angle each. Range drum allows adjustments at 50Yds per click out to 1000 Yds. Complete set comes w/ steel case, adjustment tool, scope mount, lens covers ..... and as a bonus Sarco includes 2 bases, screws, taps and drill bits so you can install the mount. The Sniper Scope and all the accessories for.........................................................$595.00 N3207 Original #32 Scopes fetch as high as $7500.00! COMPONENT PARTS AVAILABLE INDIVIDUALLY TOO! 1. #32 MK1 SCOPE by itself......................................................................... $297.00 SCP034 2. Set of rings & mount w/o bases............................................................... $129.95 SCP001 3. Leather Lens Cover.....................................................................................$21.50 SCP036 4. Front & Rear Base (Pads).............................................................................$39.95 LE4071 5. Drum Adjusting Tool...................................................................................$22.50 SCP037 6. Transit Chest for scope............................................................................ $139.95 SCP035 7. Full Set of Base Screws & Drills & Taps...................................................... $39.95 LE4075 ENFIELD MK4 #1 EARLY SWIVEL NEW! ITEM Early production butt swivel later replaced by the easier to produce oval style..............$7.00 LE4111 Enfield parts, parts & more parts! NOTE: We have most all parts for #1 MKIII, #4 MKI and #5 Enfield– along with many variations & accessories. Check our website. BUILDING A #4 MKIT SNIPER RIFLE? Mounting & tapping the bases is not easy. We got a turnkey set for you – all one with the proper British thread. 1. 7 proper screws (we send you 2 extra in case you loose or mess up any) 2. The two taps you need with the proper thread. 3. The two proper drills you need for the job – .British size.............................................. $39.95 LE4075 Note: these tools are industrial quality and not returnable. Set of 5 proper screws for the job w/o the tools....................................... $14.95 LE4076 ENFIELD #4 MKIT SNIPER RIFLE CHEEK PIECES Just in the door! Complete with proper brass screws. Use to build your sniper rifle or also to create a high comb buttstock...........$24.95 LE4106 BRITISH ENFIELD CANVAS SLING We are now able to offer you 2 of the Wartime canvas slings used on the Lee Enfield Rifles as well as 1 post war issue sling. These are new made and all feature brass hardware and an accurate cotton weave. Colors available: TAN SLNG102 BLACK SLNG096 RAF BLUE SLNG095 Your choice… $6.95 each NEW! ITEM BRITISH ENFIELD ACCESSORY KIT Sling, firing pin tool, oiler, field cleaning rod (pull through), and brush. Value $22, Special $16.95 LE4061 NEW! ITEM JUST IN...LEE ENFIELD RIFLE MAGAZINES #1 MK3 Enfield Rifle Magazine .303, 10 rd. capacity $40.00 RM011 Enfield 2A1 Rifle Magazine, .308 Nato, 10 rd. capacity… $44.50 RM039 COMPLETE SET OF #4 ENFIELD STOCK HARDWARE Buttplate, bands, swivels, handguard ring, bolt and all related screws and washers. 17 parts..............................…$39.95 LE4103 See our website for complete list of parts in kit Enfield questions? Email Lucas for answers! [email protected] #4 MKIT ENFIELD SNIPER RIFLE SCOPE MOUNT BASES • (Also called the “pads”) • Front and rear pads (set) LE4071 $39.95 (only have a few of the sets) #4 MKIT SNIPER COMPLETE PROGRAM Includes the scope mount, mounting bases (pads), plus the 7 proper screw & 2 drills & 2 taps. This all you need to build your # 4 MKIT Sniper on a #4 Enfield rifle..........................$219.95, 3 for...............................$624.00 LE4080 Special – complete scope mount with the mounting pad set......... $189.95 LE4081 ENFIELD #4 MKIT SNIPER SCOPE MOUNTS These fine scope mounts are now in stock again. Telescope mounts for the British Enfield #4 MK I (T) Sniper Rifle. We made these because there are so many #4 MK I (T)’s that were imported with out scopes. The good news!! These mounts will take a standard commercial 1” tube scope to use on your rifle while you are seeking an original scope for the rifle. Made to meticulous detail to the original as we have with all our reproduction scope mounts. Sold at a very special price considering the rarity and value of an original mount. ................................ $159.95 each SCP001 (Note - does not include scope or receiver pads) ENFIELD STRIPPER CLIPS We just bought the last small quantity we know of. They are now dinosaurs. While they last! ................................................ $3.00 ea. STC010 ENFIELD RIFLE ID DISC NEW! ITEM Brass 1 inch diameter disc which is fitted into the right side of the Lee Enfield Rifle stock. Frequently found on British & Commonwealth forces service rifles, these discs sometimes had proof marks and or mfg. names, dates etc. A great way to improve the appearance of the Enfield Rifle. Engraved brass disc w/ 4 markings .......$6.95 LE3084 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com PISTOL AND RIFLE MAGAZINES RIFLE MAGAZINES ITEM NUMBER DESCRIPTIONPRICE RM019 AK 7.62x39, 10 Round................$14.95 RM004 Carbine Destroyer......................... $6.95 RM64 CZ-452 Rifle 10rd Original, steel. Fits CZ 452 rifle and holds 10rds of 22LR. Also good for the Norinco JW-15 rifle. Excellent Condition....................$70.00 RM46 Egyptian Hakim 8x57mm, 10 rd ..................................................$79.95 RM47 Egyptian Maadi 10 rd. 7.62x39 mag single stack................................$34.95 RM011 Lee Enfield MKIII 10 Round........$39.95 RM012 Lee Enfield MKIII 10 Round, Early version w/follower retainer tab...$42.95 RM001 .22 Hornet M4 survival rifle magazine, original.......................................$49.95 RM008 Squires Bingham .22 semi auto rifle Squires Bingham .22 Armscorp .22 Model # 20C, 20P, 2000, 5C..................$24.95 RM007 Remington (.22 Cal) 10 Round ..................................................$19.95 RM002 Winchester M52..........................$19.95 MISC056Winchester M131 .22 rifle magazines original factory. Almost sold out!...$19.95 BRN003 Original BRNO .22 LR bolt action 10 shot mag............................................$39.95 RM43 Original KKW Mauser & MAS 45 .22 training rifle mag........................$24.95 PISTOL MAGAZINES .22 CALIBER RPM001 Astra Constable..........................$30.00 RPM002 Beretta Minx S.R........................$38.00 RPM003 Beretta Model 948 L.R................$36.00 RPM004 Bernardelli Model 60..................$34.00 RPM005 Bernardelli V.P. (Vest Pocket ..................................................$34.00 RPM006 Browning Challenger/Nomad ..................................................$40.00 RPM007 Colt Woodsman Early ..................................................$36.00 RPM008 Colt Woodsman Late (Magazine Catch on Side)......................................$38.00 RPM010 Galesi.........................................$30.00 RPM011 Galesi (Vest Pocket).....................$28.00 RPM012 Hi-Standard Duramatic L.R. ..................................................$38.00 RPM013 Hi-Standard H.D.........................$36.00 RPM015 Hi-Standard H.D.M.....................$36.00 RPM014 Hi-Standard Model B ..................................................$36.00 RPM016 Hi-Standard Supermatic.............$38.00 RPM019 Star Model F ..................................................$38.00 .25 CALIBER RPM126 Astra Cub...................................$34.00 RPM021 Astra Fire Cat, Orig.....................$28.00 RPM023 Bauer.........................................$32.00 RPM024 Bayard.......................................$30.00 RPM025 Bayard Model 1908.....................$30.00 RPM028 Beretta Jet Fire...........................$32.00 RPM026 Beretta Model 1915....................$28.00 RPM029 Beretta Model 418......................$35.00 RPM030 Beretta Model 950B....................$34.00 RPM027 Bernardelli Flat Bottom ..................................................$28.00 RPM031 Browning Baby...........................$32.00 RPM032 Browning Model 1906 ..................................................$25.00 RPM033 Colt Repro/Hammerless ..................................................$32.00 RPM034 CZ-DUO.....................................$32.00 GLOCK 17 - 17RD, 9MM MAGAZINE Composite magazine holding 17 rds. $14.95 RPM292 TAURUS M92 9MM Super price. $17.50ea, 3 for $48.00 RPM112 DESERT EAGLE MAGAZINE Original .41 caliber magazine holds 8 rds of ‘wall blasting’ ammunition - Used, excellent. Difficult mag to find! .........$35.00 RPM303 TOKAREV 7.62x54 RIFLE MAGAZINES New Condition $79.95 MISC053 STAR 9MM SUPER MAGS ORIGINAL MAGS FOR STAR MODELO SUPER 9MM LARGO. $24.95, RPM132 MODEL 1911 .45 DRUM MAGAZINE Original in very good condition. Rarely found nowadays! 7.62x39 caliber, 10 round .....$95.00 RM40 Fast shooting became much more fun with this reliable and well-made 28 rd, .45 ACP, drum magazine for the 1911 pistol. Easy to load and operate! ............................ $59.95 RPM309 RPM035 CZ-Model 1936...........................$26.00 RPM038 Mauser Model 1910 ..................................................$35.00 RPM037 Mauser WTP...............................$28.00 RPM039 Ortgies.......................................$34.00 RPM040 Raven.........................................$21.95 RPM041 Sterling Model 300......................$26.00 RPM042 Unique.......................................$26.00 RPM043 Walther Model # 8.......................$36.00 RPM044 Walther Model # 9.......................$35.00 RPM045 Walther Model 2&5 ..................................................$28.00 RPM046 Webley Model 1906/1909 w/o Ejector ..................................................$28.00 .32 CALIBER RPM047 Astra Model 300/3000, Side Magazine Catch.........................................$26.00 RPM048 Bayard Model 1908.....................$34.00 RPM049 Beretta Model 1919....................$34.00 RPM050 Beretta Model 1934....................$38.00 RPM051 Beretta Model 70 Puma ..................................................$36.00 RPM053 Browning Model 1900.................$35.00 RPM054 Browning Model 1910 ..................................................$35.00 RPM055 Browning Model 1922 ..................................................$35.00 RPM263 1922 Browning German Marked.......................................$50.00 RPM056 Colt Model 1903.........................$34.00 RPM057 CZ Model 1927 ..........................$36.00 RPM058 Dreyse Model 1907.....................$34.00 RPM059 Femaru Model 37........................$40.00 RPM060 Frommer Stop............................$36.00 RPM064 MAB Model D .32 ACP orig. ..................................................$22.95 RPM065 Mauser Model 1910, 1914, 1934 ..................................................$40.00 RPM066 Mauser Model HSC.....................$42.00 RPM067 Ortgies.......................................$36.00 RPM070 Sauer Model 38-H.......................$38.00 RPM072 Steyr .........................................$28.00 RPM073 Walther Model #4 .......................$35.00 RPM075 Walther PP/PPKS, early flat side repro w/ finger rest...................................$38.00 RPM076 Walther PPK................................$34.00 RPM078 Webley........................................$30.00 .38 & .357 CALIBER RPM079 Colt Model 1900 .38 Auto ..................................................$38.00 RPM151 Colt .38 Super............................$29.00 RPM131 Desert Eagle .357 ..................................................$35.00 RPM080 Llama .38 Super, Narrow Floorplate ..................................................$30.00 RPM081 Llama Model 6 .38 Super ..................................................$30.00 RPM082 Llama Model 8 .38 Super ..................................................$30.00 RPM083 Star Model A .38 Super 9mm ..................................................$38.00 .380 CALIBER RPM182 Beretta Mod 70S.......................... $30.00 RPM084 Browning Model 1910.................$35.00 RPM085 Browning Model 1922 ................$35.00 RPM088 Colt Pony (Star-Model D)............$38.00 RPM153 Colt Mustang..............................$28.00 RPM089 CZ DA Model 1938 ..................................................$36.00 RPM090 CZ Model 1924...........................$30.00 RPM091 Femaru P-37..............................$40.00 RPM092 Frommer Stop............................$28.00 RPM093 H&K Model # 4...........................$35.00 RPM094 Mauser HSC Reproduction ..................................................$40.00 MAGAZINES FOR REMINGTON .22 RIFLES NEW! ITEM EGYPTIAN ‘RASHID’ RIFLE MAGAZINE New, blued steel replacement magazine for the 513T series of Rem. .22 rifles and all Rem series 500 rifles 5rd $19.95 RM058 ITEM NUMBER DESCRIPTIONPRICE RPM095 Ortgies.......................................$36.00 RPM096 Remington Model 51 ..................................................$35.00 RPM097 Savage Model 1910/1917 ..................................................$36.00 RPM098 Walther PPK ..................................................$32.00 RPM099 Walther PPK/S ..................................................$27.00 9MM CALIBER RPM290 .22 TCM/9mm 17 round.............$32.99 RPM159 Astra Model 400 ..................................................$24.95 RPM101 Astra Model 600 ..................................................$36.00 RPM150 Beretta Brigadeer & Helwan........ $30.00 RPM105 Browning Hi-Power 13 Round, Blued (9mm Caliber).............................$17.95 RPM106 Hungarian Hi-Power P9R ............................................. $19.95 RPM107 Lahti Original....................... $20.00 RM39 Orig. Joloar ............................................. $60.00 RPM109 Radom ............................................. $36.00 RPM110 S&W Model 39 ............................................. $26.00 RPM111 Star BM, BKM, BKS Starfire, Starlite.................... $36.00 RPM152 Star Firestar.......................... $30.00 RPM114 Star Model B ............................................. $35.00 RPM112 Taurus Model 92 ............................................. $17.50 RPM102 Glisenti repro........................ $60.00 NEW VARIATIONS OF OUR 1911 .45 ACP MAGS JUST IN THE DOOR Stainless steel magazines ........................................ $10.95, 3 for..................... $29.95 RPM121 G.I. marked 1911 magazine marked .45 ACP #1005-00-8694 MFR8R320. ........................................ $10.95, 3 for..................... $29.95 RPM155 WWI pattern 1911 magazines with lanyard loop ............................ $13.95 C45295, 3 for...................................$36.95 RUGER P85 GREAT DEALS ON MAGAZINES!! RIFLE MAGAZINES FAL 20 rd M14 20 rd new $19.95 metric, new $14.95 RM024 RM63 AK47 30rd Yugoslavian, original exc condition $22.95 AK056 AK47 30rd Korean, exc condition $14.99 AK057 MACHINE GUN MAGAZINES M1 Carbine 30rd, new $14.95 CRB008 HIGH QUALITY 10 ROUND .45 1911 MAG .45 single stack magazines for 1911 Colt Special ........................$19.95 ea, 3 for .....................$49.95 RPM127 MAKAROV ORIGINAL PISTOL MAGS BROWNING HI POWER ASTRA 400 MAGS Ex. Condition $24.95 RPM268 9mm Largo - original $24.95 3 for $64.95 RPM159 M1 Carbine 15rd, new $12.95 CRB010 Glock 50rd drum, new $69.99 GLK17022 AR15/M16 100rd drum w/bag, loader, new $119.95 AR383 AR15/M16 50rd drum, new $79.95 AR422 AK47 75rd drum, new $69.99 AK007 AK47 30rd composite, new $9.95 or buy 2 get one FREE AK015 10 rd. AK-47 MAGAZINE $14.99ea, 3/$35.00 AK054 UZI 32rd steel $18.95 UZI100 MORE RIFLE/SMG/ LMG, LARGE CAPACITY MAGAZINES AR15/M16 Orlite synthetic 30 rd 5.56mm............................................................... $20.00 AR126 AR15/M16 PMAG, 30 rd, 5.56mm........................................................................... $12.95 GAL097 AR15/M4 PMAG GEN M3 MOE, 30 rd, 5.56mm....................................................... $13.95 MAGPUL056 AR15 15 ROUND HEX POLYMER MAGAZINE.......................................................... $15.99 RM65 BM 59 20 rd, .308................................................................................................... $49.50 BM59014 BREN LMG, 20rd, .303............................................................................................ $8.00 BREN007 BREDA 30 LMG, 30rd.............................................................................................. $200.00 RM52 CETME (C), 20rd, .308............................................................................................. $20.00 CET008 CETME (L), 30rd, 5.56/.223.................................................................................... $7.00 CET023 CHATELLERAULT M24/29 LMG, 25rd, 7.5mm........................................................ $20.00 RM27 DANISH M40/M1941, 100rd Drum, 8mm................................................................ $250.00 MISC287 DP28, 47rd drum, 7.62mm...................................................................................... $25.00 DP2806 DPT, 30rd drum, 7.62mm........................................................................................ $30.00 MISC220 ERMA 32rd 9mm Largo........................................................................................... $35.00 RM54 FAL, 20rd, 7.62mm.................................................................................................. $14.95 RM63 FND LMG, .30-06, 20rd........................................................................................... $10.00 FND005 GALIL BLANK FIRING MAGAZINE, 35 rd, .223......................................................... $19.95 GAL097 GALIL 35rd steel mag.............................................................................................. $19.95 GAL093 GALIL 50RD MAGAZINE.......................................................................................... $29.95 GAL004 M8 SPOTTING RIFLE 20RD MAG, .50CAL................................................................ $125.00 106R021 MAS 38 SMG, 32rd, 9mm........................................................................................ $25.00 RM26 MG34 50rd BELT, 8mm........................................................................................... $5.95 MG34075 Mini 14, 30rd, .223.................................................................................................. $25.00 MINI404 MP34 SMG, 32rd, 9mm........................................................................................... $35.00 RM32 OERLIKON DRUM, 20mm........................................................................................ $275.00 MCAN017 PPSH 41 DRUM, 71rd, 7.62..................................................................................... $40.00 MISC269 SCORPION SMG, 20rd, .32...................................................................................... $19.95 SCR008 STEN SMG, 32rd, 9mm........................................................................................... $25.00 STN007 SWEDISH K SMG, 30rd, 9mm................................................................................. $45.00 SWK038 RPD Drum w/100rd belt. New or like new................................................................ $59.95 RPD14 THOMPSON SMG, 30rd, .45.................................................................................... $30.00 TMP074 UZI SMG, 25rd, 9mm............................................................................................... $18.95 UZI099 UZI SMG, 32rd, 9mm............................................................................................... $18.95 UZI100 YUGO.M56 SMG, 30rd, 7.62.................................................................................... $45.00 RM45 ZB-26 LMG, 20rd, 8mm........................................................................................... $49.95 RM55 New, blued steel magazine for all .45 ACP Government Model/ M1911 type pistols. Base plate also acts as finger rest to improve your grip on the gun. ...................... $16.95 ea. RPM122 15rd 9mm Magazine, Stainless Steel..............$25.00 RPM230 13 round – Super price. $17.95, 3 for $49.50 RPM105 ABOUT HIGH CAPACITY MAGAZINES: Although we try to stay abreast of current State gun laws, it is a herculean task with over 20,000 laws on the books. By ordering, you are stating that you are complying with your Local & State laws. Most States allow large capacity magazines. Some do not. If you are unsure on this issue, contact your Local or State law enforcement to confirm what is allowed. This is a partial list of States with some hi-capacity restrictions: NJ, NY, MA, MD, HI, KS, CO, CT, IL and various county laws therein including Chicago, D.C. 8 ROUND .45 MAGAZINE Steel CZ-52, 8rd magazine for 7.62x25mm Ammunition. Original CZ mag body! Get one now before they’re gone again! $17.50 CZ5202 G2 Model 1911, 8 round .45 ACP stainless steel magazine ................................................................. $15.95 RPM306 Model 1911, 15 round .45 ACP stainless steel magazine ................................................................. $17.95 RPM307 Model 1911 , 15 round .45 ACP standard blued finish magazine....................................................$17.95 RPM308 .41 & .45 CALIBER RPM289 1911 Double Stack 13 round (.45 caliber) ..................................................$24.99 RPM119 Ballister Molina (.45 Caliber) .................................................... $5.95 RPM122 Colt 1911 Blued 8 Round (.45 Caliber)................................$16.95 RPM123 Colt 1911 w/Lanyard Loop (.45 Caliber).......................................$45.00 C45103 Colt Import Model 1911 (.45 Caliber) .................................................... $6.95 RPM121 Colt Model 1911 Stainless Steel 7 round (.45 Caliber).....................$10.95 RPM137 Norwegian Model 1914 Original (.45 caliber) Rare.............................. $65.00 RPM118 Star Model S.S. (.45 Caliber)...... $38.00 RPM117 Star Model PD (.45 Caliber)........ $35.00 CZ-52 PISTOL MAGAZINE See sarcoinc.com for extensive magazine listings JUST IN ….. FOR YOUR MODEL 1911 PISTOL! ORIGINAL TOKAREV PISTOL MAGAZINES 7.62x25 1. Standard mag or Chinese model 213 ........ $18.00 ea, 3 for $49.50 TOK052 2. Few Tok mags w/lanyard loop or Chinese model 213 ..................................... $24.00 TOK085 3. Orig. finger rest Tokarev mags cal. 9x19 (Luger). Chinese model 213B ..................................... $40.00 RPM163 Swiss K31 Rifle Magazines....$51.00 RM51 U.S. G.I. MAGAZINES FOR BERETTA M9 & M92 - Just In New in wrap................... $16.95 BR9207 COLT JUNIOR .25 MAGAZINE Original COLT .25 ACP magazine in stainless steel. Holds 7 rounds. Got lost in our ‘grotto’ 25 years ago. Hard to find originals! New old stock. Very Limited. ............................$34.95 RPM291 EGYPTIAN HAKIM 8X57MM RIFLE MAGAZINES Just arrived. Only got 40 mags so get yours now .....................................$79.95 RM46 Please note: These magazines have slightly over-sized catches to accommodate worn receivers. In certain instances, the catches might have to be adjusted to allow proper seating in the mag well. P38 MAGAZINE New production............$19.95 P38034 VZ52 RIFLE MAGS 7.62x45 Just found a small quantity ........................................ $64.95 RM58 LAHTI PISTOL MAGAZINES Genuine Swedish surplus magazines for the 9mm Model 1940 Lahti Pistol. Excellent condition. $20.00 ea., 3 for $49.95 RPM107 I2 SPECIAL OF THE MONTH! Take 20% Off this M1A1 stock for Ruger 10/22 purchase SARCO’S M-1 CARBINE STOCK CONVERSION FOR THE RUGER® 10/22® Stock 50 18042 Hilton Street, EastonSTOCK PA 18042 M1A1 FOR RUGER® 10/22® IN STOCK! 50 Hilton Street, Easton PA www.e-sarcoinc.com www.sarcoinc.com 610.250.3960 Fax: 610.250.3961 Hot/ off the wood mill, we’ve got the best stock to trick 610.250.3960 Fax: 610.250.3961 out your fine 10/22® rifle. Simply insert your barreled www.e-sarcoinc.com action into Sarco’s stock assy, and within minutes you have a version of the 10/22® that closely resembles and WW2 JAPANESE ARMY CARTRIDGE handles like a U.S. Paratrooper M1A1 Carbine! Comes BELT SET Excellent quality leather belt complete with handguard and swivel band assy. Looks and pouch set with bayonet frog as great, and with a folding stock, you will benefit from issued to Imperial Japanese Infantry. the versatility of use and easy storage! Beautifully made Very rugged, sturdy, high grade belt hardwood stock, handguard, and metal & leather folding set with brass buckle. Consists of belt, stock assy, are sure to convince friends that you have a 3 pouches and frog. Adjusts out to 46 real .30 cal. M-1 Carbine. Makes one of the world’s best inches...................... $49.95 MISC489 .22 rifles even better!......................... $149.95 STK380 Sarco Ruger® 10/22® rifles are a great platform This is what you don’t get. for making all sorts Our stocks are authentic M1 Carbine. of custom hunting, target, and military configuration rifles. We like it just the way it is, but now we have constructed a new way to enjoy this dependable firearm. Sarco, Inc. has created the M-1 Carbine stock specifically made to drop the 10/22® rifle into without any alteration! That’s right! No alterations! The front sling swivel is also properly installed like the USGI M1 Carbine. Others stocks on the market do not have this accurate feature. The wood grain/finish mimic the Tung Oiled finish of the Govt. Carbine stock. This fine stock comes with matching wood handguard, steel buttplate, M1 Carbine front band, M1 Carbine sling and oiler ........................... $74.95 or 3 for $199.95 STK340 (This is a SARCO, INC. product for use with the 10/22®) NEW! ITEM 1st Grenadier Guard Flag as flown over the battlefield at Waterloo, 200 years ago. This flag represented the personal guard of Napoleon. Just about impossible to find this flag anywhere on the market. Dimensions of @3 feet by 3 feet. One side of the flag shows the unit designation and the other lists 15 battle honors up until Waterloo. A strikingly glamorous flag with gold fringe for display or household decor................... $34.95 FLAG03 M1 CARBINE PARTS & ACCESSORIES Dont forget to visit E-SARCOINC.COM for 1000's of Carbine Rifle items! OUR FAMOUS M1A1 PARATROOPER CARBINE STOCKS AVAILABLE AGAIN !! M1 CARBINE BARRELS New & Made to the G.I. Print ! WWII PATTERN M1 CARBINE CARRYING CASE These are a very close copy of the World War II M1 carbine case. Made from the same type and color heavy cotton O.D. duck, with proper brass zipper and leather tabs, this case is even “U.S.” marked, as were the originals, carrying strap included. Will hold all M1 and M2 carbines. Ideal for storing or carrying your carbine; for reenactors and collectors. New condition SALE!!..................$17.50 ea. 3 for...................... $47.50 CRB094 M1 CARBINE DUAL CLIP HOLDER $5.95 CRB101 M1 CARBINE SPRING & PIN KIT All the pins & springs in a M1 Carbine $9.95, 3 for $27.95 CRB173 M1 CARBINE PISTON NUT WRENCH Available again................$12.95, 3 for..................... $34.95 CRB003 CARBINE TOOLS & ACCESSORIES Blank Adaptor.........$9.95 Magazine, 15 shot, new ............................ $11.95 Tool, trigger spring removal ...............................$3.95 Bolt Assembly tool ............................ $22.50 NEW M1 CARBINE TOOLS JUST IN! NAPOLEONIC FLAG CRB093 Finally after decades of searching for M1 Carbine barrels worthy of consideration as a replacement on a GI issue Carbine, Sarco has obtained brand new U.S. made barrels in 4140 steel that are completely machined, bored, properly cut with inlets for the front sight, machined & swedged gas block/ piston, breech with proper hood not found on commercial barrels, and bore with a 1 in 20 twist! What better way to obtain an M1 Carbine barrel with the true military GI profile! Barrels are in the ‘white’, without finish. Finally you can be assured of the perfect replacement barrel for your M1 Carbine. NOTE: features of this barrel also include : USA MADE BY NEW! Short chambered .015 OLD SCHOOL ITEM BARREL MAKER Heat treated 4140 (28-30 RC) Gas Cylinder/Block made from 4140 steel, rolled and swedged onto the barrel. These are NOT castings nor are they soldered or welded onto the barrel, but made from forged bar, pressed, swedged, and rolled into place as the original GI barrels were prepared! This process alone, separates the quality of this barrel over the competition! All of the quality steel, preparation, machining, and U.S. skilled labor involved to bring this barrel to you…and we can still offer this at an amazing price! Sarco’s special introductory price: $149.95 CRB183 M1 CARBINE RECEIVER DEMIL FRONT Front 2" of a Carbine receiver ....$12.50 CRB028 Sheared rear end of a Carbine receiver – sheared in front of rear sight base........................................................... $9.95 CRB179 Set of both of above............................................. $18.95 CRB180 CRB004 We have M3 sniper scopes and one super rare M2 sniper scope in stock. Also new original G.I. parts – Check our website or call MG Dave CRB002 M1 CARBINE SCOPE MOUNT CRB010 NEW! ITEM A. Front sight installation tool ..............$26.50 CRB174 B. Front sight removal tool ..............$26.50 CRB175 C. Receiver wrench with barrel block set for barrel removal and installation ..............$49.95 CRB006 SPECIAL – Set of all A, B & C tools ....................................$99.50 CRB176 D. Rear sight installation adjustment tool ....................................$79.95 CRB177 SPECIAL – Set of all A, B, C, & D tools above .....................$159.95 CRB178 Sorry tools are not returnable M1 CARBINE MAGAZINE DUST COVER Original rubber dust covers back in stock after many years! These are G.I. and in excellent condition. They fit easily over the top feed area of the magazine.… 5 pcs. for........................... $4.95, 10 pcs. for.........................$7.95, 25 pcs. for........... $14.95 CRB095 Installs in seconds with no special tools. No drilling or tapping. Fits all G.I. or commercial carbine only $11.95 $17.50 CRB103 Scope mount with 1” rings $15.95 $22.50 CRB104 Special of the Month Original military cartridge deflector for M1 Carbine – fastens to top of receiver w/wire form “grippers” to deflect NEW! fired cases to right of ITEM gun – keeps ‘em out of your line of sight. New surplus.....................$7.95, 3 for...................$19.95 CRB096 ERMA EM1 PARTS AVAILABLE! SEE OUR WEBSITE!! M1 CARBINE SPRING KIT A put-away special: slide stop, recoil, extractor, ejector, sear, hammer trigger, & mag catch spring $14.00 value. Only $6.95, 3 for $18.95 CRB137 NEW! ITEM This is a perfect and exact reproduction of the WWII M1A1 Paratrooper Stock. Each stock has a matching handguard, so your treasured carbine will look beautiful. (See website for other M1A1 Stock Parts) 3 for This is absolutely the best quality available $149.95 $399.95 CRB098 (Gun Not Included) Other Accessories Available: Carbine Stock Pouch $9.45 CRB134 Sling and Oiler $10.95 CRB088 Bulk buyers of this great stock, call Dave or Cholly. M1 CARBINE SLINGS AND OILERS SLING AND OILER SET $10.95 ea. 50 sets for $349.50 ($7.00/set) 100 sets for $599.00 ($6.00/set) CRB088 OILER ONLY.................................................................. $4.95 ea. 50 for.......................................................................... $149.50 100 for.............................................................. $275.00 OIL019 SLING ONLY.................................................................. $7.95 ea. 50 for.......................................................................... $300.00 100 for........................................................... $350.00 SLNG005 Early WWII pattern Khaki color M1 Carbine sling............................................................ $9.95 SLNG006 M1 CARBINE MILLED REAR COMBAT SIGHT Back in stock...........................................$29.95 CRB154 M-1 CARBINE POUCHES & MAGAZINE SETS Individual pouches for sale as well as combination sets with magazines. Every order with magazines gets a free original USGI rubber dust cover with each mag.! 1. CARBINE STOCK POUCH - holds 2-15 rd. magazines and slides onto the wood stock. New repro. With markings on front & back................ $9.45 or 3 for.......................................$24.95 CRB134 ( pictured on Left ) 2. CARBINE BELT POUCH - holds 2-15 rd. magazines and slides onto belt. New, GI.................................... $8.00 CRB092 3. CARBINE BANANA CLIP POUCH holds 4- 30rd. magazines. Slides onto belt...............$9.95 or 3 for $24.95 CRB090 ( pictured on Right ) ____________________________ 4. COMBO A: 2- 15 rd. Magazines and Stock Pouch w/dust covers ..............................................$29.95 CRB191 5. COMBO B: 2- 15 rd. Magazines and Belt Pouch w/dust covers ..............................................$28.95 CRB192 6. COMBO C: 4- 30rd. Magazines and Banana Clip Pouch w/dust covers ..............................................$69.50 CRB193 *Follow State & Local laws when ordering magazines* Check our website for new 15 & 30 round Carbine magazines – In stock – GI pattern CRB010 15rd magazine...................... $11.95 CRB008 30rd magazine...................... $14.95 Ordering instructions are in the ad or on our website M1 CARBINE RECOIL CHECK New, G.I. style “muzzle brake”, clamps onto muzzle of any G.I. M1 Carbine. Designed to reduce recoil on the M-2 Carbine. Marked “Check, Recoil M1” on bottom ......................$29.95 ea. CRB102 M1 CARBINE PROJECT BARRELS These are new barrels in process from the old PMC Carbine Factory. Bought ‘em 30 years ago. Just dug out of the warehouse. These are fully profited and threaded but have no chamber or gas block. Barrel is milled for front sight key slot ........................... $29.95 CRB194 Your choice with gas port hole or without. *Front sight key slot is milled. M1 CARBINE REAR ADJUSTABLE SIGHTS New condition $17.50 CRB155 Original leather holster for Police NEW! operations ITEM where the MP5 series SMG is strapped to the leg or assault pack. Used with the MP5A3 with mounted light/laser on end as well as MP5K. Old stock as used in the late 70s/80s. These are used, but in excellent shape. Very Limited! ...................... $90.00 HOL133 M1 CARBINE FLASH HIDERS New, G.I. style flash hider, clamps easily onto the muzzle of any G.I. type M1 Carbine Marked “Hider, Flash M3”........$29.95 CRB097 SPECIAL! Flash hider recoil check combo........................$52.95 CRB132 WWII M1 CARBINE LEATHER SCABBARD NEW! ITEM ORIGINAL BOX OF 100 DUST COVERS M1 Carbine fans will love this deal! Original G.I. cardboard box containing 100 pcs. of the rubber carbine dust cover ..................................... $25.00 CRB188 WEST GERMAN GSG9 MP5K SMG HOLSTER Also have a small number of these barrels as noted above, but with a non-military piston housing attached.................$39.95 CRB114 Gun not included These are truly Scarce as Hens Teeth! For whatever reason there are very few of these remaining on the collectors market so we have thoughtfully had them made from an original utilizing strong leather, brass cover and correct fasteners, and markings. This was used by Cavalry, on motorcycles, jeeps, half-tracks etc. Originally made for the full stock M-1 Carbine, it also fits similar sized firearms like the Ruger® 10/22® with the Sarco stock. Originals can fetch $400-$700. Sarco brings this quality leather item to you at the fabulous price of......$57.95 CRB189 ORIG WWII G.I. M1 CARBINE KHAKI CLEANING ROD POUCH New cond. Few only. WWII markings. Found in the warehouse $9.95 CRB172 NEW FLAT (WWII STYLE) M1 FORGED CARBINE BOLTS Stripped $59.95 CRB070 Complete $89.95 CRB072 M1 CARBINE BANDS First model barrel band assembly with swivel and screw. Perfect for restoration of an early WWII pattern carbine. New. Just bought a good deal on 1st model M1 Carbine barrel bands and will pass it on to you. Previously $20-$25 ea, now!!............. $14.95, 3 for.......................$39.95 CRB023 J2 50 Hilton Street, Easton PA 18042 www.e-sarcoinc.com / www.sarcoinc.com 610.250.3960 Fax: 610.250.3961 SEE E-SARCOINC.COM FOR THOUSANDS OF K98 PARTS! SPRINGFIELD PARTS & ACCESSORIES Phones Open: Mon - Fri, 8:30am – 5:00pm Showroom Open: Monday - Saturday, 10:00am – 5:00pm, Friday til 8:00pm K98 GERMAN MAUSER ORIGINAL K98 MAUSER AMMO POUCHES K98 MAUSER SPARE PARTS KIT German WW2 triple ammunition pouches used by all riflemen. Black leather in good shape. Getting more and more difficult to find originals! Markings are mixed...Pair for............................... $50.00 MSR623 Been out of these for a while. Now’s a great time to pick up a pack of these original parts before they are gone again! Contains: EJECTOR, FOLLOWER, MILLED, TRIGGER SEAR, SAFETY, FOLLOWER SPRING, SEAR SPRING, BOLT SLEEVE, FIRING PIN, FIRING PIN SPRING $29.95 MSR370 VALUE $65.00 GERMAN 98K WWII STYLE MAUSER AMMO POUCH BRAND NEW ORIGINAL 98 MAUSER STRAIGHT BODY STRIPPED BOLTS MAUSER STOCK MILITARY ISSUE Extra Special – our new ’98 bolt a new extractor and a new firing pin ............... $79.95 MSR518 Pebble grain… $9.95 ea, $18.95 per pair, $34.95 for 2 pairs MSR483 1.Israeli K98 handguard only ....................................... $19.95 MSR403 2.1908 Brazilian long rifle stock good cond. ....................................... $49.95 MSR366 3.A– Select (very few only) 1908 Brazilian long rifle stock.............. $85.00 MSR366A 4.1908 Brazilian long rifle stock with hand guard, good cond............ $65.00 MSR375 5. 1908 Brazilian long rifle stock with hanguard, Select............................ $100.00 MSR375A 6. Steyer M1912 stock w/buttplate & bayo lug .............................................$39.95 MSR548 7. Steyer 1912 Rifle Stock, good condition...............................$49.95 MSR549 Use above 1908 Mauser stocks to rework the 1908’s with cracked stocks currently on the market. Just in the door as I am writing this. The original FN production. These came out of the FN Factory in a buy of left over parts in the warehouse. Unnumbered. Never in a gun. $49.95 MSR517 See our website for 1903 Springfield Drill Rifle Barrels SPF271 1903A3 SPRINGFIELD HANGUARD New manufacture! Spruce up that Springfield with a new wooden 03A3 handguard with both metal clips installed. You’ll be very glad when you replace your dinged, splintered, or split handguard with our fresh stained replacement. Excellent quality $19.95 SPF377 1903 & 1903A3 SPRINGFIELD STOCKS A. Good, may have arsenal repair, straight stocks................................................... $75.00 SPF118 B. Select, much better than A. Nicer finish. Only very minor or no repairs, straight stocks ........................................................................................................................ $125.00 SPF116 C. WWII scant stock (semi PG) V.G........................................................................ $125.00 SPF144 D. Composite Springfield drill rifle stock & handguard, exc cond ........................................................................................................................... $39.95 SPF257 E. Good cond composite stock and HG..................................................................... $29.95 SPF362 F. Rough composite stock and HG........................................................................... $19.95 SPF363 G. Original finger groove stock, good condition as # 118 above ........................................................................................................................ $145.00 SPF267 H. WWI straight grip finger groove, reproduction stock.......................................... $160.00 SPF251 I. Original new G.I. unissued walnut 1903 & A3 Springfield scant stocks – also called semi P.G.................................... $199.95 SPF259 might have slight rusting on cross bolt. Few only, found in pile. VG to Exc. These come with a new original correct copper headspace jam screw – not installed… $250.00 SPF216 See our website for all M1 & M2 .22 Springfield parts. M1903 TRIGGER GUARDS (NOT STAMPED 03A3 TYPE) Absolutely beautiful repro of 1903 Springfield milled trigger guard. Can’t really tell from original. Replace the stamped ‘A3 guard in your rifle with one of these beauties. Finished in matte black, stripped (no floorplate) $49.95 ea. SPF117, Complete assy – trigger guard with floorplate & catch assy $69.50 SPF343 SPRINGFIELD 1907 SLINGS, LEATHER – AS USED IN WWI & WWII SLNG024 WWI Model 1907 Sling (w/ brass hardware and WWI date)........$16.95 ea. 3 for.............................................$47.95 SLNG025 WWII Model 1907 Sling (w/ steel hardware and WWII date).......$16.95 ea. 3 for.............................................$47.95 1903A4 Springfield Scope and Mount available – See our website 1903 SPRINGFIELD CARTRIDGE BELT $24.95 ea., 3 for $67.50 SPF146 SPRINGFIELD RIFLE ACCY. SET NEW! ITEM Canvas roll up pouch with original spares like extractor, ejector & pin ,striker, front sight hood, 3 blade combo tool, pull through cleaning jag, tub of gun grease, oiler, and a new .30 cal. bore brush. Terrific maintenance items to keep your Springfield Rifle running well ......................................$36.95 SPF389 GRENADE LAUNCHING SIGHT JIG FOR 1903 SERIES NEW! ITEM Springfield Rifles and M1 Carbines Original U.S. WW2 metal sight jig for setting the M15 grenade launcher sight correctly in Springfield and M1 Carbine stocks.............................$25.00 SPF390 SPRINGFIELD HANDGUARDS Original G.I. walnut handguards. M1903, New, unissued ............................................ $14.95 HNGD01 1903A3 used cracked repairable 10 for..................................... $59.95 SPF261 1903A3 plastic for drill rifle.... $15.00 SPF043 1903A3 used good................ $14.95 HNGD03 1903A3 used VG-Exc ............. $19.95 SPF089 1903 handguard Type 2 (1910 to 1916) .......................................................$150.00 1903 handguard NM........................$100.00 U.S. M1936 PISTOL BELT New made, canvas WW2 style pistol belt with three tiers of grommets and in a size that adjusts out to 45 inches. U.S. marked ..........$16.95 MISC326 Commercial set, new.......$6.95 MSR158 MISC. 98 MAUSER ITEMS 1. Rare brass Turkish Mauser cleaning funnel – locks on to muzzle. To pour solvent down the bore – for Turk M1890 & M1893 ............................ $14.95 MSR300 2. Original Argentine SOM sniper scope w/base & leather case..............................$3495.00 3. Rare M98/43 La Coruna Spanish muzzle cover........................... $9.95 MSR217 4. M98/43 Handguards, replace your cracked one......................... $16.50 MSR216 5. VZ24 Mauser new original stock disc.. $4.95 3 for.................................... $12.50 MSR523 6. Original Israeli K98 grenade launcher, like new..................................... $49.95 MSR575 7. Orig Yugoslav, 98 & M48 etc Mauser oiler ..............................................$4.95 MSR576 8. Rare original 1904 Portuguese Verguiero front sight cover, new......................$9.95 MSR591 Original stocks in good condition (no junk)! Really hard to find on the market now, and they normally command prices of $200-300 when you can find one. MSR195 German stocks with cupped buttplates - with late style hole in the cupped buttplate......................................................................... $175.00 Get one while you can! They will not last long! For Special Selection of what we have, add .....................................................$10.00 GETTING LOW!! ALMOST GONE!! ACT SOON!! U.S. M1903 & 03A3 RIFLE PARTS SPRINGFIELD M2 .22 COMPLETE BOLTS 98 MAUSER COMMERCIAL GUARD SCREW SETS GERMAN K98 STOCKS! JUST FOUND A HANDFUL! Note: Almost all of our Springfield parts are original, new G.I. bought 30-40 years ago. 1. 2. DON’T FORGET TO VISIT OUR AMAZING SHOWROOM!! GO TO E-SARCOINC.COM FOR DIRECTIONS! ORIGINAL 1903 & A3 SPRINGFIELD STOCK FRONT ENDS – removed from original G.I. stocks. These are cut just behind the band – you can use these to fix your Springfield stock with a buttered front end. Glue it under the lower band so you cant see it. We cut ‘em off years ago. We’re using them too..........................$34.95, 3 for...................................... $100.00 SPF372 CHROME SPRINGFIELD PARTS SEE OUR WEBSITE IT Increasingly difficult to find, these canteens are in very good shape with a few blemishes but completely serviceable and with good cork and caps! All of these have Mfg. stamps with various wartime dates on the bottom. Covers are new made, and we have your choice of Olive Drab or Khaki covers. All are imprinted with “U.S.” and have standard belt hooks. It’s a great time to get them because these steel canteens have all but disappeared from the market. Supply limited. U.S. Canteen with your choice of color Cover. ............................................................$40.00 MISC282 SPRINGFIELD RIFLE BRAND NEW!! SPRINGFIELD 1903A3 BARRELS 1903A3 SPRINGFIELD Same list as parts to the left only 1903A3 late pattern. Value $55.00 Special $49.95 SPF265 1903 SPRINGFIELD LOW SCOPE SAFETY ASSY $14.30 SPF054 M1903 & 03-A3 “SPRINGFIELD” RIFLE KITS These kits consist of every part of the “Springfield” rifle except the stock, receiver, and barrel assy. (w/sight bases). Kits will have bolts, bands, stamped trigger guard, swivels, trigger, etc. Use these kits to build up to a rifle on your receiver or to rebuild an old ‘03. All parts are in new or like new condition. M1903 KITS A. Parts kit includes new handguard..$159.95 ea. SPF127 M1903A3 KITS A. Parts kit.........................................$149.95 ea. SPF126 C. For a new G.I. 2 groove 03A3 barrel add........ $190.00 Barrels only sold at this price with kit purchase. Note: Rear sight parts may be used G.I. FALL SPECIAL!! Add a new Springfield stock & handguard set to either Springfield kit (1903 or 1903A3) for only: 1903........................................ $149.00 SPF380 1903A3.................................... $159.00 SPF381 Price only good with a Springfield kit purchase. 1903A3 PIN & SPRING KITS .30 caliber brass bore brushes, new. $9.95/10 • $39.95/50 • $69.95/100 BRUSH-001 SPRINGFIELD STRIPPER CLIPS Early brass WWI......................$4.00 ea, 5 for.................................$14.95 STC025 1903 SPRINGFIELD GRENADE LAUNCHING BOOTS A perfect reproduction of the grenade launching rubber boot (slip on) for the Springfield and M1 Garand. Absolutely meticulously beautiful!! ........................$34.50 MISC088 SPRINGFIELD PUT AWAY KIT 1/2 PRICE! NEW! ITEM EXTRA LONG REAR GUARD SCREWS FOR 1903A3 RECEIVERS The standard guard screw only goes up part way in an A3 receiver. This screw fills the hole to make your rifle more attractive. Haven’t had these for 20 years. The G.I. screws only engages a few threads. $3.95 ea, 3 for $9.95 SPF360 1903 & A3 SPRINGFIELD SPRING KIT A put-away for the future all springs in the gun – bolt sleeve lock, main, cut-off, sear, floor plate catch, & magazine follow $15.00 value – Only.................................... $4.45, 3 for................................. $11.45 SPF248 1903A3 TRIGGER GUARD ASSEMBLIES A brand new complete assembly – trigger guard + follower + spring + 2 screws -$51 value $39.50 SPF375 Complete assembly, used surplus - $51.50 value... $39.50 SPF376 Trigger guard only, brand new..... $31.50 SPF079 Trigger guard, used G.I................ $32.00 SPF368 All the pins & springs in a Springfield rifle – 03 & A3 included $9.95, 3 for $24.95 SPF341 SPF143 Screw, windage.......................................* $7.50 SPF094 r ear sight, complete without windage screw w/o barrel ring, VG to Exc............................ $39.95 SPF264 R ear sight complete w/windage screw & w/o barrel ring........................................... $44.95 SPF273 1 903 sight base (around barrel).............. $45.00 * Above parts are new. Check our website for all other ‘03 sight parts 1903A3 SPRINGFIELD DRILL RIFLE BARRELS BORE CLEANING BRUSHES NEW! ITEM Yes we just received a shipment of high quality 4140, 4-groove barrels with shallow chamber, extractor cut, front sight cut out for base, with a 1 in 10 twist. We had these made with a shallow chamber (.044") to accommodate for receiver variations. In the white and unmarked! ................................................ $135.00 SPF387 (Very Limited Availability) 1903 SPRINGFIELD REAR SIGHT PARTS COMPLETE HARDWARE SET FOR Trigger, 2 sears, 1 milled follower, 2 ejector, 2 strikers, 1 mainspring, 2 trigger pins, 1/2 price special. $15.80 SPF095 ORIGINAL U.S. WWII DATED CANTEEN WITH NEW COVER NEEW M! These were removed from drill rifles & have their chambers welded or have a rod in the barrel with a small plug weld to hold it in. Front sight base not included................................... $12.50 ea, 10 for..................................................$99.95, 50 for.....................................$400.00 SPF270 BRAND NEW 1903A3 SPRINGFIELD REAR SIGHTS ASSEMBLIES Forgot we had ‘em...................................$29.95, 3 for............................................ $84.95 SPF370 Original G.I. A3 rear sight new in wrap ................................................... $50.00 SPF065 Original G.I. A3 rear sight used VG ................................................... $40.00 SPF294 Check our website for A3 Sight Parts - Have all parts NEW GI SPRINGFIELD BARRELS 1.New G.I. 4 groove 1903 Springfield barrel, dated 1943. 1903 front and rear sight bases were added as a modification for use as a 1903. .................................................... $269.95 SPF386 2. M1903A3, New, G.I., 2 groove...... $199.00 SPF080 3. M1903A3, New, G.I., 4 groove...... $229.00 SPF130 SPF344 SPF016 SPF015 SPF121 SPF342 SPF353 SPF355 1903 & A3 SPRINGFIELD BUTTPLATE COLLECTION New G.I. milled.................................. $30.00 Used milled buttplate........................ $18.00 Standard A3 used............................. $12.00 Milled fine checkered......................... $34.95 Original G.I. die cast buttplate.......... $39.95 Hand select Smith Corona buttplate A3, used............................................ $29.95 G.I. stippled armorer match milled buttplate........................................... $30.00 COMPLETE NEW SCREW SET FOR 1903 & 1903A3 SPRINGFIELD Includes: Upper band screw Rear guard screw Front guard screw 3 Small buttplate and Large buttplate screw swivel screws Stacking swivel screw Cut off screw Lower band screw Note: the 1903 kit also includes the front sight screw (value $23.00) SPF378 – screw set for 1903A3 .......................................................... $11.95 (value $26.00) SPF379 – screw set for 1903 .......................................................... $13.95 CMP SPRINGFIELD DRILL RIFLE REPAIR KITS All the missing or destroyed parts. Cut off, Front sight, Cut off spindle, Bolt body, Cut off plunger, Striker (firing pin), Cut off spring, Stamped drill rifle rear sight $61.40 regular value – Sarco Value..........................$34.95 3 sets for........................................$99.95, 10 sets for.........................$250.00 SPF361 03A4 SNIPER SCOPE MOUNT BASE Late production military scope mounts for the 03A4 sniper rifle. Parkerized steel, unmarked. Will accept Redfield rings (not included) $44.95 SPF136 U.S. SPRINGFIELD 1903 & 1903A3 “TYPE C” FULL PISTOL GRIP STOCKS FALL SALE ON C STOCKS! These stocks will fit on the 1903, 1903A1 and the 1903A3. These will also fit on your 1903A4 sniper rifle with small inletting for the bolt handle and is also correct for the national Match rifle. This stock was standardized in 1928 by the army for all Springfield rifles going forward and was issued on all National Match rifles. Crossbolt & nut included but not installed. Guard screw bushing included .............................................................. $179.95 $149.95 SPF276 (stock only) Stock with new 1903A3 handguard.......................... $199.95 $169.95 SPF278 Stock with new original G.I. 1903 Handguard.......... $189.95 $159.95 SPF277 Hardware not included. While these are truly “drop in stocks” we cannot guarantee proper installation as it is beyond our control. Minor variations occur in Springfields GERMAN WW2 TROPICAL LUGER GERMAN WW2 SPLINTER ‘B’ CAMO. M43 STYLE HAT HOLSTER GERMAN WW2 FIELD GEAR Sampling of quality uniform items for re-enacting or completing static displays. We are pleased to include uniform camouflage fabric too! See our web site for more items. GERMAN WW2 STICK GRENADE (Potato Masher) Accurately made inert German M1924 ‘Potato Masher’ grenade with removNEW! able base cap. The ITEM primary grenade used throughout the war by Infantry. Comes with markings. Excellent for re-enacting or static displays. Real wood lathe turned handle with steel head & cap...........$24.95 MISC464 Paratroop holster for P08/ P38. Skeletal design safely holds the pistol without the bulk of a hardshell holster.$16.95 HOL109 German Breadbag with strap and WW2 markings...... $19.95 MISC403 German A-Frame with WW2 markings.......$19.95 MISC404 German canvas leggings with WW2 markings.... $17.95 MISC405 German MP40 pouch set: Two 3-cell pouches .....................$19.95 MP4009 MP44 Pouch set: Two 3-cell pouches. .................. $32.95 MP44005 Combat Pack—soldier canvas pack used with the A frame........$19.95 MISC406 German A- frame with Combat Pack.................. $37.95 MISC383 G-43 Double magazine canvas pouch ........................................ $12.95 G43002 K98 Grenade Launcher Pouch with strap. Black leather........ $19.95 HOL117 German Splinter Camouflage—A favorite of the Luftwaffe & Wehrmacht. Fabric can be used to make uniforms, tents, etc. Sold by the meter: 1 meter German Oakleaf Type B, Camouflage Material Oak leaf camouflage material as used by German SS forces during the WW2. The material is reversible so it is great for making tunics, trousers and Zeltbahns. Pattern Sold by the Yard. ....................................... $22.00 MISC460 GERMAN PANZERSCHRECK LAUNCHER SHIELD Steel replacement shield for the all of the German Panzerschrecks that came into the country without shields in the 1960s. This was essentially a blast shield and frequently left on the battlefield or discarded during heavy combat use because it sustained damage or was unwieldy. Our new made shield is stamped out of steel and has the glass hangers (no glass), brackets for camo, and barrel locking collar. No finish. Shield only. Best price on the market!.....................................$60.00 MISC461 GERMAN WW2 HELMET CARRIER Wearing your helmet was arduous especially when you had to march great distances through Eastern Europe and the Russian plateau in the summer. Troops were happy to have a means to fasten their helmet to their gear so they could use their soft caps. Originally made in the late 1930s and used with the M35, M40 & M42 helmets. New made, in strong black leather with steel clips .................................................. $16.95 HLM036 FINNISH WW2 ANTI-TANK MANUAL Shows use of German weapons ..........................................$7.00 SB169 WWII GERMAN PANZERFAUST INSTRUCTIONS We have accurately copied the original issue instructions provided to the soldier when issued the Panzerfaust 60 Launchers..................................... $5.00 SB170 AUGENSCHUTZER ‘42’ EYESHIELDS NEW! ITEM German eyeshields for protecting eyes from the elements. Tinted flexible eyeshield has periphery protection with venting. Comes with head strap. Excellent condition.. ............................................... $8.95 each or 10 for........................... $49.50 MISC001 by @ 58". .. $20.00 MISC396 German Wehrmacht Note Pad—Adjutant note pads copied from original. Size 7-1/8" x 4-7/8"........ $3.95 MISC296 German Rubber Stamp Set—set of 6 rubber stamps used by adjutants and units. You can mark almost anything..... $25.00 STAMP03 German WW2 Box Stencils: A. Panzerfaust Klein Launchers ...................... $14.95 MISC350 B. Mines/ Schutzenmne.. $14.95 MISC351 C. Panzergrenaten........... $14.95 MISC352 Or buy all 3 for................ $35.00 MISC353 WW2 Metal German Wall Plaques: SMALL REICH PLAQUE- wingtip to wingtip distance 15 inches $22.95 MISC371, LARGE REICH PLAQUE- wingtip to wingtip distance 27 inches...............................$49.95 MISC372 Mauser K98 Ammo Pouch ...................................$9.95 ea, Pair for............................. $18.95 MSR483 Khaki canvas Luger holster used in the last year of the North Africa campaign. Strong canvas fabric with leather accents and magazine pouch. Luger tool pouch under main flap. New mfr w/WW2 German markings...........................$14.95 HOL142 GERMAN OFFICER VISOR CAP SS, White......$45.00 MISC378 GERMAN OFFICER VISOR CAP SS, Black, Wool .................. $45.00 MISC379 WW2 GERMAN M43 WOOL HAT GERMAN OFFICER VISOR CAP SS, Field Green, Wool .................. $45.00 MISC380 GERMAN OFFICER VISOR CAP Afrikakorps Luftwaffe .................... $49.00 MISC38 GERMAN MAXIM MG WATER CAN Steel WWI designed water can used with both the Maxim NEW! 08 and ITEM 08/15 machine guns. Steel casing with solid brass spigot and brass water fill cap. Accurate copy of the original, but stronger steel used and resists dents and edge separation better than the original .................................. $85.00 MISC440 ORIGINAL WW2 GERMAN MILITARY REPLACEMENT GLASS LENS 43mm round lens for replacing broken lenses in the the Neophan/ Auer, German mnfr. glasses furnished to MG13/MG34/MG42 gunners during the war. These glasses were a familiar sight from the 1920s through the early 40s. Usually seen on tortoise shell and wire frame GlassMP44 Mag Loading Tool Will save your fingers the wear es, normally issued in a metal case. Original and tear. Works with original and in excellent condition / Green color repro mags.......................$5.95 MP44003 ........................................$14.95 MISC466 Mauser K98 RIFLE BOOKLET Reprint of original WW2 German manual .......................... $6.95 SB171 MP44 GRIP SETS Beautiful repro MP44 grips–Just in! Made in wood just like the original ........................................ $24.50 GRP141 German Dot-44 Camouflage—A favorite of the Waffen SS. Fabric to make uniforms, tents, etc. 1 meter by 58" $20.00 MISC407 K98 MAUSER AMMO POUCHES, ORIGINAL Pair of German WW2 triple ammunition pouches used by all riflemen. Black leather in good shape. Getting more and more difficult to find originals! Markings are mixed .....................................$60.00 MSR623 NEW! ITEM WW2 GERMAN HELMET LINER Double steel banded liner with German markings, leather lining, and correct M31 German Chinstrap with buckle and metal studs. Size is 7-1/2 inch (Large). Excellent replacement for worn or damaged liners in M35, M40 & M42 helmets.............................$21.95 HLM035 REICH EAGLE STENCILS Steel stencils great for marking up boxes, vehicles and other WW2 display items. Two sizes available. Reusable, easy to clean and flexible. LARGE REICH EAGLE STENCIL, 13"x10"$22.00 MISC279 SMALL REICH EAGLE STENCIL, 9"x6".......................... $18.00 MISC280 GERMAN MP44 (STG) ‘BUTTSTOCK’ MANUAL REPRINT OF THE ORIGINAL GERMAN WW2 POCKET MANUAL ISSUED WITH THE ASSAULT RIFLE This is the 1944 updated version usually carried in the buttstock trap with takedown tool and gas cylinder brush..$4.95 MP44009 WW2 GERMAN SPLINTER CAMO JACKET (Reversible for forest & snow camo) A favorite of the Wehrmacht & Luftwaffe troops! One side is German WW2 Splinter camo while the opposite is white for snow operations. Complete with waist belt and hood. New mnfr. Best Price around! $79.95. MISC472 Sizes- Large, X-Large, 2XL (specify when ordering) Standard ruck or backpack that replaced the 1930s tornister pack. The M41 was much better for its mission and had capacity beyond that of the tornister. Comes with leather shoulder straps or you can use with your Y straps...... $49.95 MISC487 GERMAN MP-40 SMG (non-firing) Excellent - new manufacture, earth brown colored M43 cap with two WW2 emblems. We like this one best as the color of the cap goes well with most clothing and it has a functional chin and ear protection flap that is excellent protection for cold weather. Made with a medium weight wool so it works in North American climates throughout the year! Sizes 7-3/8", 7-1/2", 7-5/8"........... $22.95 MISC345 GERMAN M35 WW2 HELMET Model M35 helmet with leather steel banded liner and leather chinstrap and shell with rolled edge like the originals. We provide a free German WW2 era emblem decal. U.S. Size is @7-1/2",(Large), which works well between 7-1/4 to 7-5/8" head sizes. New mnfr., Green................ $49.50 HLM037 GERMAN LUFTSCHUTZ WW2 HELMET GERMAN G-43 MAGAZINE Famous full size display gun with operating bolt, recoil assembly, folding stock, mag catch and trigger. Saw combat throughout Europe, Africa, and even Vietnam! Bound to spark interest and conversations from all who see it. Realistic metal and plastic construction and it comes with steel magazine and leather sling.................................. $210.00 REP02 WW2 GERMAN BOOT KNIFE & SCABBARD NEW! M ITE Fighting knife or utility knife, this new made version of the venerable German ‘trench knife’ is convenient and easy handling. Blade is @5-75 inches long and steel scabbard has a 2-3/8 inch suspension clip. Wood slotted grips. .................................... $24.95 BAY269 GERMAN LUGER PISTOLS www.e-sarcoinc.com GERMAN METAL HAND STAMPS Metal handstamps for imprinting leather, wood and soft metals with iconic WW2 German markings commonly found on issue items. Just like the original production and inspector stamps! SET OF WWII GERMAN INSPECTOR’S STAMPS One of each of the German WWII Date/Code stamp & the Waffen Eagle inspector's stamps. Perfect for adding interest and value to your original or reproduction leather harnesses, holsters, belts, wood, and soft metal items. Simply wear safety glasses, hold the metal hand stamp and hit it with a hammer to leave a clean impression of either the German WWII Date/Code stamp or the Waffen Eagle inspector's stamp. These are not for hardened 'gun' metal, but can be used to stamp non hardened items like wood stocks, copper, brass, leather etc. Stamps are well made, shipped in perfect condition and not returnable$100.00 STAMP06 Waffenstamp size: 1/2"x7/16" Date/Code stamp size: 1/2"x1/2" '44 date DATE/MANUFACTURE CODE STAMP ............................ $65.00 STAMP05 WAFFEN #135 METAL HAND STAMP ............................. $50.00 STAMP04 WAFFEN #655 METAL HAND STAMP ..........................................$50.00 WAFFEN #623 METAL HAND STAMP ..............................$50.00 STAMP08 REICH EAGLE HAND STAMP ..............................$50.00 STAMP10 NEW!! WW2 ITALIAN FASCIST HAND STAMP ......... .............................$60.00 STAMP11 All steel construction, this full size WWII German Panzerfaust Rocket Launcher was the precursor for the RPG series. It packed a terrible punch and gained respect by Allied tank crews who faced this on many campaigns, especially when driving through small German towns where it was the easiest way to close down a road. Our Panzerfaust comes complete with a reprint of the original WWII operator instructions, flip up sight/trigger unit, and rocket with flexible fins. A terrific display piece for museums, static displays or reenacting..............$180.00 RL002 SOLDBUCH (book)........$6.75 SB168 WW2 PANZERFAUST 60M ROCKET Full size, inert, steel replica of the original warhead used to defeat American and Soviet Armor in WW2. Very realistic with folding fins.................................................... $75.00 RL003 WW2 GERMAN PANZERFAUST ‘KLEIN’ ROCKET (3 VARIETIES) Beautifully made, full size replicas in metal with knurled wood grips. Very realistic looking. We offer a couple with and without holsters: 1. Standard luger w/ 4" barrel ............................................. $112.95 Standard luger w/ WWI canvas holster ............................................. $122.95 2. Naval Luger w/ 5" barrel........ $112.95 Naval Luger w/ WWI canvas holster ............................................. $122.95 3. Artillery luger w/ 8" barrel.....$124.95 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 GERMAN PANZERFAUST 60M LAUNCHER & ROCKET (Inert/Non-Firing) Well-made multiple piece construction like the original. Used by all of the services. Large size 7-1/2" ............$55.00 HLM024 Well-made and tested, steel 10rd. magazine for the G-43 semi-automatic rifle. Meticulously made identical to the original............. $44.95 G43001 WW2 GERMAN M41 RUCKSACK MAKE YOUR OWN TENTS OR ZELTBAHN ! M2 The M43 cap is a true German innovation from WW2 and our Enlisted hat newly manufactured splinter camouflage cap is sure to satisfy. Strong HBT material w/ venting grommets. Used by Luftwaffe and Wehrmacht units in the last years of the war. 4 sizes Officer’s hat available: 7-1/4", 7-1/2", 7-5/8", 7-3/4. Both Enlisted & Officers version are available. Officers hat comes with sliver braid piping and badge on front. Enlisted hat has no attached embroidery. ENLISTED SPLINTER B HAT......... $19.00 MISC375 OFFICER’S SPLINTER B HAT ................................... $20.00 MISC376 The first ‘bazooka rocket’ of the war! Full size, steel, inert. New........................... $60.00 RL004 REP06 REP14 REP09 REP18 REP10 PPK PISTOL (NON - FIRING ) Another of our well-made metal replicas of the stalwart sidearm of the Wehrmacht, 007, and many other good guys and arch villains! Full size metal replica with moving slide and hammer/trigger click...... $84.95 REP21 SEE E-SARCOINC.COM FOR MORE AMAZING ITEMS!! GERMAN WW2 MP44 ASSAULT RIFLE (NON-FIRING) Full size, solidly built with some functioning parts. Comes with magazine. Feels and looks like the real thing!...............................$240.00 REP03 GERMAN P38 PISTOL (NON-FIRING) Issued to Wehrmacht troops in 1940, this pistol became the regular sidearm of 3rd Reich Officers & some NCOs. Cheaper to produce than the Luger, it was light and effective. NEW! Even a half pound lighter than the Model ITEM 1911 and with an 8 rd. magazine. Our authentic looking non firing display gun looks and feels like the real thing. Slide can be cocked, hammer pulled and trigger squeezed with a distinctive click. A classic display piece in metal with black plastic grips like the original. We have two offers: 1. P38 non firing pistol........... $72.95 REP05 2. P38 pistol with our WW2 dated hard shell holster ........................................................ $87.95 REP15 O2 50 Hilton Street, Easton PA 18042 www.e-sarcoinc.com / www.sarcoinc.com 610.250.3960 Fax: 610.250.3961 PLEASE VISIT US AT E-SARCOINC.COM!! OR BETTER YET, VISIT OUR SHOWROOM IN EASTON, PA!! Showroom Open: Monday - Saturday, 10:00am - 5:00pm Friday til 8:00pm SARCO HAS A NICE ASSORTMENT OF GERMAN WWII SCOPES & ACCESSORIES ZF39 SCOPE FOR GERMAN 98K WWII SNIPER RIFLE Here you have a faithful reproduction of the ZF39 Scope as used by German Snipers during WWII. This scope has the proper finish, weight, size and steel tube diameter (26.5mm) to install the low turret mount and short side rail mount that Germany produced for their Sharp Shooters (Scharfschutzen). The power scope has bullet drop compensator that runs from 100 to 1,000 meters, with increment marks every 50 meters and a focus adjustment vane. The three-post reticle and clarity is superb, both ends are just hand tight in order to remove and install closed rings low turret mounts, if other mount is going to be used, just tightened by hand all the way. Now you have the chance to get your Mauser 98K or long rifle fitted with the optics and mounts that made the German Sniper System so famous. Best of all is at a price you can afford !!! MAUSER SCOPES & MOUNTS MSR499 ZF39 Scope 4 power............................... $299.00 MSR573 ZF39 scope 6 power................................ $299.00 MSR401 Short side rail scope mount assembly..... $199.00 MSR545 Low turret scope mount assembly with closed rings....................................................... $175.00 MSR544 Low turret scope mount assembly with split rings....................................................... $179.00 MSR500 Mauser swept back scope mount............. $149.95 MSR501 Mauser swept back mount with ZF4 scope .............................................................. $429.00 MSR554 ZF39 scope with closed ring low turret mount – specify 4 or 6 power............................... $435.95 MSR555 ZF39 scope with split ring low turret mount Specify 4 or 6 power scope...................... $459.00 MSR571 ZF39 sniper scope with short side rail mount Specify 4 or 6 power............................... $449.00 Please Note: Base screws are not included. closed ring low turret MSR545 Open ring low turret MSR544 GERMAN WW2 ZF39 SCOPE MOUNT New and accurate manufactured Scope Mount as used by the Wehrmacht & SS from 1941-1945. Improved last model mount with the top lock screw,2 pins and extra long locking lever. Set up with 27mm rings. If you need for a 1” scope, we can include shims at no charge, but you must ask! Perfect for creating a WWII German Sniper Rifle ......................$199.00 MSR401 THE ZF41 MOUNT Was made by Berlin-Lübecker Maschinenfabrik, a German WWII firearms manufacturer, the company made all the ZF-41 Marksman scope mounts from 1941 till 1944. Another added feature is that you can install it yourself without the need for drilling and tapping and that was something the German Army had in mind, they could send the mount and scope to the field and with a small punch and a brass hammer, the scope was installed in minutes, thus making a standard 98K into a Sniper System. You will ask yourself, how come I did not buy it sooner? ZF41 Scope....................$289.00 MSR473 ZF41 Scope Mount.........$189.00 MSR474 ZF41 Scope & Mount.....$469.00 MSR476 Exact repro of the original ZF41 Scope can cover with cleaning bursh, sunshade retainer & canvas belt strap .....................................$200.00 MSR475 Now set as a package deal. You canhave a ZF39 K98 Mauser sniper scope with the side rail mount assembly....... $449.95, 3 for........................ $1249.95 MSR571 Please Note: The closed rings are standard WWII issue but many folks want the open rings for ease of installation and the open rings are acceptable in the national sniper scope matches. WW2 ITALIAN M91 FIGHTING KNIFE Say what you will about the Italian Army in WW2…. But one thing is true, and that is the quality of their fighting instruments like the M91 knife were among the finest battle weapons. Our late production knife with scabbard is a terrific combat knife sporting an 8 inch steel blade, hardwood handle and scabbard with locking belt keeper. It has very good balance compared to most fighting knives that are usually way too heavy on the grip end. U.S. GIs loved to use them for knife throwing. Originals will cost you $400800. Sarco’s price buster special .....................................$26.95 BAY255 Original FN contract scope mount for the FAL rifle. Each mount is fastened to a standard metal FAL rifle cover and the mount can be reversed, depending on the scope and eye relief required. Standard Nato lug notches are inset for settling the scope in place. We offer two versions: Standard Stanag Mount, and Paratrooper Stanag Mount for which there are distinct differences in the metal cover used. These are in excellent shape, but may have some slight blemishes from being stored for 20+ years. SARCO is selling these at a fraction of the original price! A. STANDARD FAL STANAG MOUNT............................................................................................. $74.95 FAL195 B. PARATROOPER FAL STANAG MOUNT ..................................................................................... $99.95 FAL196 *RED/GREEN DOT SCOPE* SARCO also sells our Stanag Mounts with a versatile Red/Green dot scope, with fast on/off locking levers. Features: • Emerald lens coating/anti glare -unlimited eye relief. • 4.0 MOA dot sight with red or green illumination. • Flip open front & rear caps. • Illumination rheostat w/ various brightening levels / adjustments. • Fits Picatinny mounting rails - Which is why we can offer it to you with one of the STANAG MOUNTS at a package price! SCOPE W/ STANDARD STANAG MOUNT..................................................................................... $129.95 FAL280 SCOPE W/ PARATROOP STANAG MOUNT................................................................................... $149.95 FAL281 PURCHASE EITHER ITEM# FAL 195 OR 196 - and receive an original night vision mount adapter. PURCHASE EITHER ITEM# FAL 280 OR 281 - and receive a Picatinny Rail Adapter! TAKE 15% OFF ANY OF THE ITEMS IN THIS BOX!!! GETTING LOW! HURRY UP & GET ONE NOW!! ~ There are different procedures for Ordering PARTS vs Ordering FIREARMS ~ Prices are subject to change without notice. We are not responsible for typographical errors or misprints ATTENTION – EASTON SHOWROOM CUSTOMERS Re: In Stock Inventory - We try and maintain stock of most items in our Easton, PA showroom, however with the vast array of material we carry, this is not always possible. If you are planning on visiting the showroom, please feel free to call ahead to make sure that we stock the item(s) that you need. If these parts are not at the showroom, we will arrange to have them brought in from our warehouse for you to purchase or look at. Please give us a least a few days’ notice before your visit so we have time to bring the goods in. Please note that the prices in Shotgun News are dealer prices and may not be the same prices as in our showroom. We are striving to make your shopping experience with us a pleasant and hassle free as possible. PLEASE NOTE: Please, do not send us your original parts for comparison. We are not responsible for lost, damaged, or misplaced parts in transit or upon receipt. Please include only a picture and dimensions of parts needed for comparison. Thank you. DISCLAIMER: Parts sold by Sarco should be installed only by a competent gunsmith. These products are sold as is and without a warranty. No liability is expressed or implied for damage or injury which may result from the improper installation or use of these products. REGARDING LOCAL, CITY & STATE REGULATIONS! SARCO makes a large effort to keep abreast of state & local gun laws. With over 20,000 laws on the books this is a Herculean and impossible job. Some of the products sold by SARCO could be restricted for sale in your local area, while not restricted nationally. This could include, but not be limited to firearms, ammo, parts, high cap mags, edged weapons, air guns, etc. You must determine your right to purchase, own, use or resell specific products offered by SARCO in your jurisdiction. As local laws are constantly changing, it your responsibility to determine if a product is prohibited before ordering from SARCO. You warrant by ordering from SARCO that you are a legal adult without any legal restrictions from ordering and are complying with all state, local, and federal laws. Please check your local laws before ordering. LEGAL ADVICE????? PLEASE, DO NOT CALL SARCO for legal advice on guns. We are not a legal firm and therefore are not able to give any advice. Any discussions had with any SARCO employee are to be considered as guidance only. For questions on legal gun matters we suggest you call ATF. That’s what we do. Quality reproduction of this incredibly rare sniper scope mount. It takes the ZF-4 scope, which we have available. Mount is complete with the rings. These mounts were made to standardize the ZF-4 scope at the very end of WWII. This is the rarest of the rare. It comes complete with the mounting base & rings & screws for attachment to a standard 98K WWII Mauser. Developed by Sauer. $179.95 MSR500 Combo Special – Swept back mount with ZF4 scope $469.95 MSR501 SPECIAL OF THE MONTH MSR500 - $149.95, MSR501 $429.95 WWII GERMAN ZF39 SCOPE AND MOUNT MILITARY ISSUE MOUNT STANAG’ FAL SCOPE MOUNTS ORDERING INSTRUCTIONS SUPER RARE SWEPT BACK MOUNT FOR K98 MAUSER SNIPER RIFLE PHONE ORDER – Call (610) 250-3960 ONLINE ORDER – Go to www.sarcoinc.com FAX ORDER – (610) 250-3961 MAIL ORDER – Sarco Inc, 50 Hilton St, Easton PA 18042 SHOWROOM VISIT – Mon-Sat 10am-5pm / Friday Opened til 8pm For directions to the showroom, see website. CUSTOMER SERVICE – [email protected] PARTS QUESTIONS: [email protected], MACHINE GUN QUESTIONS: [email protected] MAGAZINE SALES IN CONNECTICUT Until we get further clarification we can ship NO cartridge magazines, feeding devices, or drums to Connecticut. We are able to send 10 round or under magazines to holders of FFL. OUR INVENTORY · We try to ship the best condition parts at the time of your order. Some are new and some are used, many hard to get. · Prices are subject to change without notice. Our ads in the Shotgun News are catalogue prices and may not reflect any sales or higher pricing found on our website. · All sales subject to availability. Acceptance or receipt of order does not constitute confirmation of order. Employees are not authorized to modify prices or conditions stated in ads. · All NFA rules apply. Sarco only sells products to persons 18 years or older Please note: Sarco’s responsibility for goods shipped ends when it leaves our door. Lost or damaged claims are the responsibility of the claims carrier. We will assist in every way for you on claims to carriers. Visit E-SARCOINC.COM for loads of bayonets and fighting knives! ABOUT HIGH CAPACITY MAGAZINES: Although we try to stay abreast of current State gun laws, it is a herculean task with over 20,000 laws on the books. By ordering, you are stating that you are complying with your Local & State laws. Most States allow large capacity magazines. Some do not. If you are unsure on this issue, contact your Local or State law enforcement to confirm what is allowed. This is a partial list of States with some hi-capacity restrictions: NJ, NY, MA, MD, HI, KS, CO, CT, IL and various county laws therein including Chicago, D.C. RETURNS We offer a 5-day inspection period on all of our merchandise, except for special order items which are not refundable. Items that state they are sold “as-is” are not returnable. Tools and marketing devices are not returnable. · PHONE ORDERS, EMAILED, FAXED OR MAILED-IN ORDERS: You will need a Return Authorization Number to return something. Please email [email protected] or call (610) 250-3960 ext.114 for a RT #. Feel free to check on the status of your return, credit or refund. · ONLINE ORDERS: Please visit our website www.e-sarcoinc.com and click the Return Policy link. Fill out the printable form and mail it back with your package. Feel free to email our e-Comm department at [email protected] to check on the status of your return or call (610) 250-3960 and ask to be transferred to the e-Commerce Department. We do not refund any shipping cost unless the error/problem causing the return is our fault. Returns may be subject to a 10% restocking charge. SHIPPING ALL ORDERS WILL BE RECEIVED, PROCESSED AND SHIPPED OUT OF OUR PENNSYLVANIA LOCATION. MINIMUM SHIPPING AND HANDLING CHARGES START AT: $9.50 Rifle Stocks and Barrels…. $12.50 Call for larger items on prepaid orders * NJ residents please add 7% sales tax. Not all items available to NJ residents. * PA residence please add 6% sales tax All orders to Alaska and Hawaii shipped via US Mail, unless customer specifically requests Blue or Red Label UPS (not available for online orders). Employees not authorized to modify prices or conditions stated in this advertisement. OUR GUARANTEE Our guarantee is simple and easy to understand. If you are not satisfied with any item received from us you have 5 days to return it for a replacement or a refund of the advertised price. All returns must be accompanied by a letter WITH YOUR INVOICE NUMBER and explanation of the problem. All returns must be in the same condition as you received them-any alterations or work will void the guarantee. Special order items not returnable. We can not accept returns on TOOLS unless the tool is defective. We do not refund any shipping costs unless the error/problem causing the return is our fault. Returns may be subject to 10% restocking charge. Send all shipments pre-paid. CODs will be refused. Any items returned due to customer’s error are subject to a 10% restocking charge. ($2.00 minimum). As we do not install the parts we sell, we cannot guarantee they will function when installed by others. For proper function and safety, many gun parts should be installed by a competent gunsmith - see our disclaimer: U.S. WWII PARATROOPER SIGNAL CRICKET X2 Phones Open: Mon Fri, 8:30am – 5:00pm Showroom Open: Monday - Saturday, 10:00am – 5:00pm, Friday til 8:00pm 50 Hilton Street, Easton PA 18042 www.e-sarcoinc.com / www.sarcoinc.com 610.250.3960 Fax: 610.250.3961 JUST GOT ANOTHER SHIPMENT OF PICKELHAUBES Finely crafted of heavy leather with solid brass trim, cockades, spike assembly and detailed eagle emblem. These are M1895 Prussian German Fusilier Regiment Helmets - Nicely done. All the metal is a beautiful brass. An extremely accurate & detailed recreation and fit for use or display and will be the topic of conversations in your collection or “man cave”. German spiked helmet. These helmets were used up to the end of WWI. Beautiful huge brass Prussian spread eagle on the front. Last shipment we sold out for $99.95. SARCO struck a tremendous deal to bring you this helmet at 1/10th the price of an original............................................... $59.95 HLM015 RUSSIAN PPSH-41 SMG (non-firing) WEST GERMAN P6, SIG 225 HIP HOLSTER RHODESIAN SELOUS SCOUT RIFLE/SHOTGUN CASE Heavy cotton gun bag very similar to the British rifle bag, but slightly shorter and in a mustard color. About 41" long. Large Rhodesian Selous Scout emblem stenciled on one side. These gun bags will hold some rifles, but were primarily used to hold Greener and Belgian Browning Shotguns in barracks, watchtowers, Eland Armored Cars etc.......$15.95 MISC394 1889 PICKELHAUBE STEEL W/SAXON REGIMENTAL BADGE Truly one of the world’s first class sub machine guns of WW2 & beyond. Over 5 million produced and many of them came face to face with U.S. servicemen in Korea and Vietnam. Spewing a voracious 900+ rds. a minute with 7.62x25 Tokarev ammo, this gun demanded respect, especially when the Soviets outfitted entire Companies of their infantry with this SMG against German troops in WW2 and the Chinese against U.N. troops in Korea.This glorious full size, non-firing display gun in wood and metal with removable 71rd. drum, has an action that allows you to cock the bolt and pull the trigger. We also offer an Original Ppsh41 sling and Drum Pouch with this package ,as long as supplies last. ( colors of pouch & sling may vary ). EW PPSH41 W/ POUCH & SLING... $199.95 REP29 Used in the days before and after D-Day, this device put out a distinctive clicking sound so that allied troops could communicate to “friendlies” by sound instead of with a bullet in the dark! Probably saved a lot of lives. Very few originals remain, except in museums. These work well and are made of brass with a metal flapper. U.S. embossed….........$7.50 MISC284 N ! ITEM * Brass & Steel badge, Steel Spike with Cockades, brass scalloped chinstrap. Limited Stock! THE PRUSSIANS ARE COMING! WWI Picklehaubes Iconic head wear of Prussia and Imperial Germany available at fabulous prices! Long recognized as a symbol of Germany’s military might, and worn by such famous figures as Bismark, The Red Baron, ‘Sgt. Schultz’, and Mata Hari in her disappearing clothing act. Actually used in trench warfare in the first 3 years of WWI. Sarco worked out a deal to provide these beautifully crafted late manufacture helmets to you at very competitive prices.........$99.95 HLM016 BREN 30RD. .308 COMBAT VEST Chest rigs as used with the Bren L4 series guns , AKs, and similar assault weapons in African ‘Bush’ wars. Originally fielded in Rhodesia for 30rd .308 magazines, it can still be seen in use from Mali, Congo, Southern Sudan and elsewhere on the continent. Simple, practical, and comfortable to wear. Has fastening waist strap and shoulder straps. This item has never been on the market! Vest only. We offer this in two varieties: Inert, original bodies significantly different from the fake cast bodies sold elsewhere on the market. Complete with expended fuse and ring assembly. Limited.....$14.50 AM032 A. Rhodesian type grass pattern Mag. Vest $36.00 BREN129 NEW! ITEM NOTE ON NON-FIRING DISPLAY GUNS STEN MK-2 SMG DISPLAY GUN Outstanding new arrival of a non-firing, all metal replica of the venerable Sten Gun used since WWII. Stock is removable, bolt can be charged, and magazine is removable. We have two versions in stock: A. STEN MK2 WITH SLING & MAGAZINE ...........................................$145.00 REP22 B. STEN MK2 WITH SLING, ..... MAGAZINE AND COMMANDO PISTOL GRIP FOR CONVERTING THE GUN INTO A PARA TROOP VERSION.................$159.95 REP23 W/20 RD. MAG. (NON-FIRING) Some functional parts, includes sling and 20 rd. stick magazine....................................................$242.95 REP13 B. Khaki South African Mag. Vest $34.00 BREN130 Fits on your belt. $12.95 MISC303 M1 GARAND RIFLE (NON-FIRING) U.S. M1A1 PARATROOP CARBINE ALLIED & AXIS DISPLAY GUNS (NON-FIRING) While most Americans can own non-firing display guns, some States and municipalities have enacted regulations inhibiting ownership. It is important that you check your State’s gun laws to see if you reside in one of these areas. We cannot ship our display guns out of the country. Below is a partial list of States where there are laws concerning ownership of display guns. Remember, by ordering from Sarco, Inc., you are confirming to us that you are complying with your State regulations on this issue. CA, CT, KS, MA, MN, WI *All non-firing display guns come with an orange plug inserted in the muzzle – required by Commerce law. U.S. THOMPSON 1928 SMG The wood on this rifle is better looking than most govt. wood stocks. Wellmade w/some functioning parts…$235.00 REP08 (check local/state laws to make sure you can own this item) Sarco presents an increasing new line of finely made metal and wood replica firearms, noted for their historical significance in the battle for and against, the rise of fascism and geo political domination in the World Wars of the last century. These display guns are full size and the best quality on the market. Many of them come with markings and or accessories not available from the competition. These are perfect for presentation, static display, reenacting, or for outfitting that military vehicle in the garage! Black leather P38 pistol holster with rugged black 2 inch wide standard WW2 Army belt with embossed NEW! steel buckle. @49" long with inside ITEM reducing length strap. WW2 markings. New........................................$37.95 HOL134 U.S. 12 GA SHOTGUN POUCH ORIGINAL U.S. BASEBALL GRENADES Original West German hip holster used by the Police. These have detachable belt loop hangers. Can be used without the hangers by running a belt through the back strap. Excellent condition ...............$15.95 HOL136 P38 HARDSHELL HOLSTER W/ WW2 WEHRMACHT BELT (NON-FIRING) FRENCH LRAC-50 BAZOOKA Rarely seen since their use in Indochina, Algeria, and the Yom Kippur War, these rocket launchers were similar to U.S. Bazookas , but added a shield and optic housing. Very compact, they were easier to maneuver in tight spaces and primarily saw service with French forces in Colonial frontiers and the Israeli Army. Demilled to BATF specs. Sarco is the only place to get these! $495.00 RL006 (non firing) Also… original LRAC-50 canvas Bazooka cover from the French Army in used serviceable condition. Covers the launcher with shield attached. Very few................$65.00 MISC410 B. Very realistic looking with some functioning parts. This version is the standard WW2 model w/o bayonet lug $218.95 REP07 STOCKS AND FORENDS ... SARCO’s GOT A BOATLOAD OF WOODEN STOCKS & FORENDS Super Commercial Stock Deal.... all brand new original stocks and forends! Seriously, a great deal on wood for firearms under the mfg names such as Mossberg, Marlin, H&R, Savage, Ithaca, S&W, and Winchester. 15 difWOW! THIS IS ferent stock and forends at a fraction 75% OFF! of the cost and with no duplicates. Total Value $587.00, but Sarco’s Special Price is all 15 pcs. for $150.00 or buy 2 LOTS for $265.00! This is the best deal we have offered in a long time. I would have bought it myself 30 years ago when we were building our commercial gun parts business. This is a great opportunity for Gun Show sale items and if you sell 3 of the 15 items, you’re out of it! ONE LOT of stocks & forends.... $150.00, TWO LOTS for $265.00 STK363 RPG-75 SHOULDER FIRED ROCKET LAUNCHER Watch the news and you will probably see the RPG75 being used in combat by both sides in the Syrian conflict! This 2 foot long inert training RPG-75, opens and extends to 35” long, when ready for fire. Very similar to the U.S. M72 LAW Rocket Launcher, this Czech made rocket launcher weighs 7 lbs., and comes with shoulder strap and flip up sights. This is the same RPG you will see in many hot spots around the world, especially in various Bush Wars in Africa, by SWAPO units in Angola, and the Near East ...................................................................................................................... $199.95 RL010 Properly cut British Sten MKII Parts Set consists of T-buttstock, bolt assy. and recoil spring, magazine housing with catch assy./lock/ejector, trigger housing with internals, cover & screws, rear & front sight, and rear caps. Our fabulous price may not last long as these guns are getting more difficult to find overseas! Get one before they run out. This kit does not come with a barrel. MKII kit w/o barrel..... $139.95 STN028 MKII kit with barrel.... $204.90 STN030 *Almost all States allow ownership of this kit, but we recommend you consult your local & State laws prior to ordering. Very accurate folding stock version of the Paratroop M1A1 carbine. Some functional parts and magazine. $220.95 REP11 A. U.S. M1 CARBINE (NON-FIRING) STEN MK2 PARTS KIT SMAW TRAINER SARCO has a few of the Shoulder Launched Multi-Purpose Assault Weapon training Note: Originally launchers as used by the USMC and U.S. produced as a Army. The spotting rifle, optical sight, foregrip training unit for and front tube have been removed and U.S. Govt by replaced with similar mounted parts to maintain appearance. The original F.A.T.S. spotting rifle magazine has been fastened in the magazine well, new optical sight is mounted and the iron sights are still in place too. This is non-firing, so no transfer or license is needed. Made using Military parts w/some new mfg parts as needed. .............................................................................................................. $1,200.00 RL007 Add a barrel to this kit for the discounted price of $64.95 (barrels regularly $74.95) STEN MK3 PARTS SET Properly cut British Sten MKIII parts set with T-Stock, bolt assembly w/ cocking handle, trigger housing w/ internals, cover & screws, magazine housing w/catch assembly, ejector and front & rear sight, recoil spring and rear caps. Also includes about 1-3/4" of the front muzzle receiver tube with front sight. This kit does not come with barrel. MK3 kit w/o barrel.$89.95 STN098 *Almost all states allow ownership of this kit, but we recommend you consult your local & State laws before ordering. THOMPSON 1928 DISPLAY GUN (non-firing) Wood and metal replica of the venerable submachine gun that made history with gangsters of the 20s, and our troops and allies in WW2. Well made and has a cocking mechanism that moves back and forth and trigger that allows the bolt forward. Magazine catch also works. Comes with steel 50rd. display drum. A real crowd pleaser and guaranteed to start conversations! ........................................................................................................$249.95 REP01 DISPLAY PISTOLS (NON-FIRING) U.S. MODEL 1911 (NON-FIRING) Full sized metal reproduction with diamond knurled wood grips. Sold with lanyard. Model 1911 Pistol w/lanyard… 1. Model 1911 Pistol w/lanyard ............................. $135.95 REP12 2. Model 1911 Pistol Pistol/lanyard & Hip Holster ........................................................................... $147.95 REP16 RPG-7 ROCKET Original Russian training rocket, full size, weight, and comes with separate rocket motor in waxed container. @36" long when assembled. Limited........................ $124.95 RL011 HARLEY DAVIDSON MOTORCYCLE WW2 ‘WLA’ SADDLE BAGS We sold out of these quickly last time we had them. Tough well-made leather saddle bags to go with a tough motorcycle and a price that is the best around! Color- Black. Pair of saddle…......$245.00 MISC335-BLK Also available in brown! GP1 S&W MODEL 10 SHOULDER HOLSTER 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 www.e-sarcoinc.com Aviators revolver holster w/ shoulder strap. New & U.S. embossed!.....$24.00 HOL110 1911 HAWK (matte finish) 45ACP 1911A1 G.I. TYPE 45ACP • 45acp 5" barrel, Government size 1911 • Matte blued finish • GI style external parts • Fixed rear dovetail sight & fixed post front sight NEW! • Vertical Rear serrations ITEM • Slightly beveled magwell to make magazine changes quicker & easier • Walnut, double diamond, fine line checkered grips $459.00 GUN646 • 45acp 4.25” barrel, Commander size 1911 – • Matte blued finish • Novak LoMount style rear sight w/ dovetail front sight • Front and rear angled serrations • Extended slide stop & thumb NEW! safety for easy reach ITEM • 3 hole trigger & skeleton hammer • Beavertail grip safety w/ memory bump • Lowered & flared ejection port • Slightly beveled magwell to make magazine changes quicker & easier • Walnut, double diamond, fine line checkered grips $599.00 GUN647 1916 MODEL 1911 HIP HOLSTER Our standard grade U.S. WW2 PISTOL LANYARD U.S. M7 SHOULDER HOLSTER Standard grade Woven cotton OD lanyard with leather cinch & attaching hook. Very difficult to find originals. This was wartime issue for the 1911 & S&W Model 10 pistols.................$7.95 MISC385 WW2 style leather holster with shoulder & chest strap. Right hand draw...$29.95 HOL067 durable 1911 holster with leg strap. Excellent value. ...................$17.50 C45112 NEW !!! IVER JOHNSON 1911's IN STOCK !! THRASHER SS POLISHED THRASHER (matte EAGLE (matte finish) 45ACP black) 45ACP 45ACP Thrasher SS Polished is Thrasher is matte black in • 45acp 5" barrel, Government size 1911 Matte blued finish • Millett, fully adjustable, white outline, rear sight w/ dovetail front sight • Front and rear angled serrations • Extended slide stop & thumb safety for easy reach NEW! ITEM • 3 hole trigger & skeleton hammer • Beavertail grip safety w/ memory bump • Lowered & flared ejection port • Slightly beveled magwell to make magazine changes quicker & easier • Walnut, double diamond, fine line checkered grips $599.00 GUN648 finish. This model comes with Walnut large diamond grips. It has the following features: • Weight: 1.9 lbs. • Barrel length: 3 1/8” black bull barrel • Frame and slide are 4140 CNC machined steel • Capacity: 7 + 1 (45acp) NEW! • Capacity: 8 + 1 (9mm) ITEM • 2 stage recoil spring system • Military style trigger • Beavertail Grip Safety with memory • Military style fixed front and rear sights • Military style thumb safety • Ejection port lowered and flared • Beveled magwell $524.00 GUN650 of a stainless steel construction with a polished finish on the sides of the frame and slide. The top of the slide is satin in finish. This model comes with beautiful Rosewood double diamond, double border grips with owl head logo. NEW! • Weight: 1.9 lbs. ITEM • Barrel length: 3 1/8" black bull barrel • Frame and slide are 416 stainless steel • Capacity: 7 + 1 (45acp) - Capacity: 8 + 1 (9mm) • 2 stage recoil spring system • Beavertail Grip Safety with memory • Military style fixed front and rear sights • Military style thumb safety $699.00 • Ejection port lowered and flared GUN649 • Beveled magwell “ROCK” OUT ON THE RANGE THIS SPRING WITH A NEW ROCK ISLAND! America’s Fascination with the 1911 .45 goes on. Back to the Basics with a “good ‘ol .45” at an affordable price. ROCK ISLAND ARMORY STANDARD 5” 1911 .45 ACP High Quality and Great Traditional Appearance • Beautiful GI Style Parkerized Finish • SPECIAL - 8 Round Magazine with Finger Rest • 1911 A1 Style Sights • Long Milled Grooved Trigger - Consistent 51⁄4 to 51⁄2 Pound Trigger Pull • Flat Steel Grooved Mainspring Housing PARTS INTERCHANGABLE WITH U.S. G.I. • All Steel Ordinance Grade 4140 Steel - Made on Computerized Numerical Control CNC Machines • ISO 9001 COMPLIANT • ALL GUNS COME IN HARD PLASTIC CASE WITH MANUAL & SHELL CASING 5" Pistol Not CA Legal PLEASE NOTE :ALL PISTOLS Not for Sale in Massachusetts (Please Check Local Laws) GUN037 - $365.00 (Extra 8 Round Mag. (Blued) $20.00 – RPM122) Pre-Paid Orders Add $15.00 for Shipping or Ask About UPS Overnight Saver for Faster Delivery ROCK ISLAND RAIL GUN - TACTICAL 2011 1911 FRAMES $119.95 GUN012 Build your own custom .45 Manufactured from 4140 Steel on CNC Machinery. Fully machined. Above frame with our internal parts kit ($89.95 value) for $184.95 GUN595 ROCK ISLAND 1911 MICROMAG BLOW 22 TCM / 9MM OUT! Randy from GunsForSale.com writes that this is a brand new 1911-style autoloader chambered in the new .22 TCM caliber. Rock Island Armory cartridge designer Fred Craig said the proprietary .223-based pistol caliber round sends a 40 grain jacketed hollow point bullet downrange at 2100 feet per second. The goal was to make a 1911-type pistol “with the same weight, but double the firepower and delivering more foot pounds of energy.” .22 TCM AND 9MM • 2 DIFFERENT BARRELS • Composite grips • 5 inch barrel TWO GUNS FOR THE PRICE OF ONE ! $599.95 $569.00 GUN442 .22 TCM 1911 MID SIZE TCM .22 Midsize standard model delivers blazing performance using a .22 caliber bullet that travels over 2,000 fps. The gun is outfitted with an original Armscor cartridge creaing excellent muzzle energy and light recoil making this a truly unique high-capacity pistol. 17 round capacity $574.95 $549.00 GUN570 ROCK ISLAND TACTICAL 1911 .45 “The Hottest Seller Right Now” • .45 ACP • Semi Auto • 5” Barrel • 8 Round Magazine Capacity • Combat Sights - Dovetail • Beavertail Grip Safety • Skeletonized Hammer & Trigger (Target Grade) • Ambidextrous Thumb Safety • CA Legal $439.00 GUN276 ROCK ISLAND 1911 .45 COMPACTS – BACK IN STOCK!! STANDARD .45 ACP G.I. 6 Round Mag., 31/2" Bull Barrel, Not CA Legal....................... $415.95 ............................................................................. $399.00 GUN035 TACTICAL .45 ACP 3.5" Barrel, Extended Beavertail Full Guide Rod Snagfree combat style sight, Fully parkerized............. $449.000 GUN569 MATCH GRADE ROCK ISLAND 1911’S JUST IN!! The Rock Island Match 1911 O SARC E! USIV EXCL This is Rock Island Armory’s top of the line 1911. The pistol is hand fit for superior slide and frame match. Triggers are crisp with a clean break. The front fiber optic sight makes BLOW acquiring your sight picture effortless. If you are looking for a OUT! great range gun for target shooting or steel matches for a great price look no further $649.99 $599.00 GUN384 .22 TCM AMMO, ARMSCOR Specs: Caliber: .22 TCM, Grain Weight: 40 Bullet Type: JHP 1875 Muzzle Velocity 1686 fps Velocity at 50 yards 1511 Velocity at 100 yards 312 ft/lbs Muzzle Energy 252 ft/lbs Energy at 50 yards 203 ft/lbs Energy at 100 yards A Real “Slab Side”! Full length, Squared Dust Cover with 1913 Picatinny Rail, mounted to a full-girth squared slide without lightening cuts. In addition to the upgrades on the original Tactical model, such as Skeletonized Hammer and Trigger, Beaver Tail Grip Safety, and Ambi-Thumb Safety, the 2011 Tactical also adds Tru Dot™ Night Sights as an option. With Tru Dot Nights Sights...................................$599.00 GUN430 Without Tru Dot Night Sights............$529.99 $515.00 GUN431 Parkerized finish, Semi auto, 5 inch battle Slide and frame hand fit, Skeletonized trigger and hammer, 8 round capacity mag, front sight is a dovetail fiber optic, rear sight is a LAP adjustable, checkered grips, ambidextrous thumb safety, beavertail grip safety. (this is not for 22.LR firearms) $25.00/BOX AM144 (50 to a box) NEED SPARE MAGS? THESE JUST IN! .22 TCM / 9mm, 17 rd. Magazine - In Stock!.............. $32.99 RPM290 .45 1911 Compact Magazine....................................... $24.50 RPM158 1911 Double Stack .45, 13 rd Magazine - In Stock!..... $24.99 RPM289 OUT BLOW ST O M AL OST! AT C 9MM ROCKS 1911 COMPACT TACTICALS 9MM 3.5 inch barrel, Extended beavertail, Full guide rod, Snag-free combat style sight, Fully parkerized 9mm $459.99 BLOW OUT! $449.00 GUN568 9MM PARA (9X19) 9mm Standard G.I. 5" $409.99 $399.00 GUN341 9mm Tactical $450.00 BLOW OUT! $399.00 GUN342 These are not for sale in California ROCK ISLAND ARMORY 1911A2 2011 VZ SPECS: - 2dot adjustable rear sight with tru-glo high vis. Front sight - Front and back wide-angled slide serrations - Full dust cover rail to even the weight and reduce recoil BLOW OUT! - 13 round mag - ambidextrous safety - combat hammer - extended beavertail for maximum comfort and safety. - competition style over-sized magwell $575.00 GUN577 ROCK ISLAND ARMORY 1911 MIDSIZE SPECS: Chambered in .45acp and outfitted with a shorter barrel, smooth wood grips and a parkerized finish 1911 Midsize GI. Faithful to the original 1911 design, the Standard GI is equipped with a 4.25 inch barrel, fixed sights, and an 8 round magazine. $439.95 GUN038 DON’T FORGET!! ALL OUR ROCK ISLANDS COME WITH A LIFETIME FACTORY WARRANTY! ROCK ISLAND & ARMSCOR FRAMES Quality ‘Armscor’ 1911 frames in standard full size, compact, midsize, and tactical styles. These are precision CNC machined from castings made from ordnance grade steel. Great chance to obtain a high precision, carefully machined, quality frame for your ‘1911’ build! And all have correct ejectors installed! These are closeout prices and may never be available again! GUN636 - Mid size, standard 1911 frame,.45 cal. parkerized. For 7 rd. magazines and 4.25" slides................................................................................................... $139.00 GUN641 - Full size, standard GI frame,.45 cal., parkerized..................................................$129.00 GUN637 - Mid size, Tactical frame with full length rail, .45 cal., parkerized. For 7 rd. magazine & 4.25” slide......................................................................... $169.00 GUN642 - Full size Tactical frame with rail, .45cal., parkerized.................................................................. $169.00 GUN638 - Full size, standard Tactical frame with serrated front strap, .45 cal., parkerized. ............................................................................................................ $149.00 GUN643 - Full size wide body tactical frame with full length rail, 9mm cal., parkerized.................................................................. $200.00 GUN639 - Compact size, standard Tactical frame, .45 cal., parkerized. For 6 rd. magazine & 3.5" slide.............................................................................................. $169.00 GUN644 - Full size Tactical frame with full length rail, .40 S&W/10mm cal., parkerized. ............................................................................................................ $149.00 GUN640 - Wide body, standard GI frame,.45 cal.,parkerized ............................................................................................................ $199.00 GUN645 - Mid size Tactical frame with full length rail ,.40S&W/10mm cal., parkerized. ............................................................................................................ $159.00 15 www.e-sarcoinc.com 50 Hilton Street, Easton PA 18042 610.250.3960 Fax: 610.250.3961 Phones Open: Mon - Fri, 8:30am – 5:00pm Showroom Open: Monday Saturday, 10:00am–5:00pm, Friday til 8:00pm BULGARIAN MAKAROVS GUN466 $324.95 each, or buy 2 at $299.95 ea. • Excellent- New Condition • 9x18 Makarov • Will be shipped with 2 grips, 1 (black) and 1original (brown with star)• Comes with 1 magazine, holster and cleaning rod • Add extra mag for $19.95 each • Add a lanyard for $4.95 • Hand select available for additional $19.95 I.O., INC. AKM247 RIFLE Back In Stock! AKM247 (AK type) rifles 7.62x39 These rifles feature all new parts with fully heat treated receivers and black composite furniture with heat shield. Bolt hold open , recoil buffer, cleaning kit and one mag. $499.99 GUN578 (we also have some CA. Compliant rifles available) For an additional $30.00 CHINESE TOKAREV 213 FRAME Great deal on original Chinese Model 213 frames! Perfect for a pistol build at an unbeatable price. Used in good condition. While they last! ...................................................$9.95 GUN256 PPK & MINI COMPACT SHOULDER HOLSTER East German Stasi low profile shoulder holster used by numerous police agencies behind the Iron Curtain. Perfect for carrying backup pistols or maintaining a low profile with a sweater, vest, or dress jacket. Original, natural leather.................$14.95 HOL092 IMAGINATION IS NOW THE MOTHER OF INVENTION! ***What could you build with a 93’ Mauser Action ?*** That unusual or unorthodox firearm design you’ve longed to build, could just be a little closer to reality if you use our Mauser1893 Receiver. The opportunity is here and at a price designed to fit anyone’s wallet! Cholly has dreamed of a ‘Camp Gun’ project for years and has been putting away small ring short Mauser actions. We now have come to market with the concept, but no time to do the project. We will build a ‘camp gun’ when the time opens up! This project lends itself well to creating a short barrel, lightweight gun built on a small ‘action’ similar to the classic German G33/40 mountain carbine. We can offer you the receiver by itself or a complete Receiver & Action. RECEIVER alone: $20.00 Ea, 5 for $90.00, 10 for $160.00, 50 for $750.00 GUN001 RECEIVER & ACTION: $75.00 Ea , Or 10 for $650.00 GUN653 If you like the Flash Hider shown in the picture to the right, we can offer it to you at $9.95 each, or 3 for $24.95 with a purchase of a 93’ Mauser Receiver TOK087 Note: When building any gun, seek advice of a competent gunsmith or expert, especially in experimental projects. 1903A4 U.S. SPRINGFIELD SNIPER RIFLES 12 GA. PASI1 TACTICAL SHOTGUN THE LATEST SARCO SLEEPER DISCOVERY This may be the BEST Shotgun Deal on the market! Proven reliability and affordability in one 12 Ga. Pump action shotgun holding 4 rds in the tube and one in the chamber. Barrel is machined from 4140 steel, honed & chrome lined in similar fashion to premium rifles. Dual action bars are CNC machined and heat treated, bolt chromed and treated for low luster finish and the overall finish is black. Additional notable features include an easy point bead front sight, oversize 2 position cross bolt safety, 18.5" barrel, fixed recoil reducing stock and smooth operating trigger. All of this jammed into an ‘easy day’ carry weight of just 8 lbs. Manufactured by ASI, they are known for using only the highest quality materials! This price is just too good to pass! $179.00 each, 3 for $495.00 GUN571 FFL Dealers call for prices! AR LOWER RECEIVER & KIT Great Deal on Bushmaster lower receiver. Just................................................... $79.95 GUN574 As a kit, we offer the Bushmaster lower receiver with the lower receiver internal parts, grip, and collapsible buttstock, recoil spring and buffer .......................................................$139.95 GUN579 GUN ORDERING INFORMATION •C all our Ordering department, (610) 2503960, Monday – Friday 8:30 to 5:00. All guns can only be shipped to FFL Dealers. All firearms laws apply. Please review your local & federal laws. Please Note: All firearms, frames & receivers should be checked or assemble by a competent gunsmith before firing.Include daytime phone number with your order. • Guns can be ordered via credit card (Visa or MasterCard only), check, or money order. • Sorry we do not do COD’s. A Note On Shipping Costs: (approximate) Rifles: One rifle averages $15.00 to $20.00 + insurance 3 rifles average $22.00 to $35.00 + insurance Pistols: via USPS - 1 pistol averages $20.00 to $25.00 + insurance via USPS - 3 pistols averages $35.00 + insurance via UPS - 1 pistol averages $25.00 to $50.00 + insurance via UPS - 3 pistols average $70.00 to $80.00 + insurance Pistols to California (UPS only) about $55.00 to $60.00 + insurance Hawaii & Alaska - via USPS - Pistols $25.00 via UPS Red - $90.00 UPS Rifles - 1 rifle $45.00 to $50.00, 3 rifles $90.00 - $95.00 Pennsylvania residence please add 6% sales tax All charges are charged at actual cost of shipping & handling. Above information is for your reference and reasonably accurate. For orders with check or money orders, include sufficient shipping - low range is East Coast and high range is West Coast. All guns can only be shipped to FFL Dealers or C&R Collectors for C&R guns. All firearm laws apply. Please review your local & federal laws. Massachusetts no pistol or pistol frame sales. California Pistol must be on approved list. In accordance with California state law, pistols can no longer be shipped to California by means of the US Postal Service. All pistols will need to go UPS Overnight or Overnight Saver. Due to US Postal Service regulations, pistols, revolvers, and other firearms capable of being concealed on the person are NOT PERMITTED to be mailed unless they are mailed to a manufacturer or dealer. C&R license holders are not dealers and therefore cannot receive these firearms through the US Postal Service. C&R license holders that wish to purchase pistols, revolvers, and other firearms capable of being concealed on the person will have to have them shipped via UPS Overnight. PLEASE NOTE THAT SHIPPING CHARGES ARE NOT REFUNDABLE IF YOU ARE NOT SATISFIED WITH YOUR PURCHASE. Please Note: Prices in our ads are those for shipments to FFL dealers – You may have your choice shipped to your dealer. Some may vary from prices in our showroom due to additional over head and processing costs. GALIL .223 RECEIVERS We found you small lot of Galil .223 receivers. Only a few available .....................$399.95 GUN289 STAR BM Steel frame, 4" barrel plastic grips Good $269.00 GUN440 STAR MODEL 30PK Good condition $225.00 GUN409 STAR BS The BS in a normal second model B but has the addition mag safety. Made from 1957-1983 Good-VG $275.00 GUN434 STAR MODEL B – “SECOND MODEL” Production started in 1931 and ended in 1983 9mm para blue finish. Good bores. Good – VG $265.00 GUN438 RE: RETURNED FIREARMS, SARCO IS NOT RESPONSIBLE FOR ANY RETURN TRANSFER FEES. BEFORE RETURNING ANY FIREARMS TO SARCO, CALL AND GET AN RMA NUMBER FROM THE GUNROOM. Stunning Price Busting Deal of 2015! PARA ORDNANCE LDA PISTOL PACKAGE Brand new LDA complete Frame assembly in original Para Ordnance box! You can purchase this alone or reap tremendous savings on purchasing this with a SLIDE of your choice. The Para steel Frame accepts 3.5 inch and 4.25" slides and can be used with 3" slides if the hood is trimmed back - Will not work with a 5” slide. The frame is the Officer’s Model LDA, single stack, and is not caliber specific so you can customize it to 38 Super, 9mm, 40 S&W, .45 ACP. The frame is cut for the Clark® type ramped barrels. The barrels and recoil spring assemblies are available from numerous commercial sources and the frame accepts the shorter 1911 Officers magazine. Enormous savings will be realized when you examine these prices against the price of a new LDA pistol of at $700-800! 1.Frame assembly in box $235.00 GUN588 2.Slide of your choice – 40% off retail price online! Go to our website and choose from a host of 3", 3.5" & 4.25" Para LDA slides. Valid on up to 10 Para LDA slides when purchased with Frame assy in box. Go to www.e-sarcoinc.com to make your selection. Note: Para Ordnance Light Double Action Pistols are premium compact firearms popular for ‘concealed carry’ and well respected for quality and performance. Para Ordnance has been absorbed into Remington, and Sarco will also have a position in selling many of the original quality parts. In fact, our substantial inventory of Para Ordnance parts, will allow us to supply parts for many, many years to come! with proper M73B1 Scope! Small lot available. These rifles have original 1903A3 G.I. receivers and most parts are original G.I. They have a new criterion 4 groove barrel identical to the original. The scope is an exact repro of the M73 B1 scope by HiLux with some current technology internal improvements. External is exact repro. These guns are produced by the acclaimed Rock Ridge machine & are fully approved for CMP vintage sniper rifle matches. Scope mount is an exact repro—stock is beautiful “C” type full pistol grip stock. Rifle is fully parkerized ......................................$1395.00 GUN564 1903A3 SPRINGFIELD RIFLES FROM ‘THE PACIFIC’ A small number of good condition, firing rifles from the HBO series, The Pacific, are still available. These were wartime rifles that served again in the filming of the mini series. Most are Smith Corona or Remington. Stored since the filming, and each rifle is sold with certificates of Authenticity, certificates of formal handling from Customs documents, Armament prop handlers, and the production firm. Chain of custody is fully authenticated and Sarco was the supplier and final recipient after production. A rare chance to obtain a piece of movie memorabilia and an actual firing 1903A3 Springfield. (FFL required). $895.00 GUN369 SWEDISH MAUSER /CARL GUSTAV CG-63 MATCH RIFLE, (CROWN JEWEL) 6.5MM Specially made in Swedish military arsenals for 300m ‘Match’ shooting. They feature a heavy, non-stepped barrel, tuned trigger assembly , a stock with Monte-Carlo check pieces on both sides, a pistol grip, short forend and handguard. Barrels are free floated and sights are match quality micrometer aperture sights of various makes. The Swedish equivalent of a U.S. National Match Springfield rifle. They were built in both Germany and Sweden, and were manufactured with high grade tool steel and alloyed with vanadium, nickel and copper for superior strength and corrosion resistance. Renown for accuracy in the Swedish Army where it was designated the Gevar 6. Fewer than 40 pcs. available! Had these 12 years ago and they went fast!!............................................................................................................................................................$795.00 GUN114 ATTENTION M1 CARBINE FANS: Own A Piece of History. We just discovered a cache of German Erma-Werke EM1 .22LR carbines! These complete rifles resemble M1 Carbines… except that they are in .22LR caliber and are dovetailed for a .22 scope mount. The Israeli Military used them as trainers in the late 60’s and early 70’s. The condition of these rifles is good with some stock dents and dings from training, shipping and storage. Bores are excellent and have many years of life left in them. All Guns come with (1) 15 Round Magazine. We are also offering some rifles missing both front and rear sights at a lower price for those who wish to mount a scope on their EM1. Don’t procrastinate!! These rifles won’t last long. This is a rare find! GUN593 – Erma-Werke EM1 without Sights...................................................................................................................... $225.00 GUN596 – Erma-Werke without rear sight......................................................................................................................... $249.00 RM66 – Spare magazines also available.................................................................................................................................$59.95 THE RENOWNED FULTON ARMS M14 RECEIVER There’s a reason that we are still using the M14 platform 50 years after its adoption..... IT DELIVERS! Whether you’re a military contractor heading to Iraq, Afghanistan, Kurdistan, Somalia or American marksman looking for the basic or Sniper based Platform, this is a Solid Great Deal. We offer 4 flavors of Semi Auto M14 Receivers precision made utilizing 8620 Alloy steel, precision geometric CNC processing from Lost Wax Investment Castings & made in the USA! Properly heat treated & core hardened to Mil Specification. We have 4 flavors of receiver: A. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M14................................................................................ $549.95 GUN581 B. M14 Semi Auto Receiver, marked U.S. Rifle 7.62mm M21 (NJ compliant)......................................................... $549.95 GUN582 C. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M14 ........................................................................................................................................................................... $699.95 GUN583 D. M14 Semi Auto Receiver, with rear lug/ threaded 1/4-28 for stabilizing receiver bolt, marked U.S. Rifle 7.62mm M21(NJ compliant)..................................................................................................................................................................... $699.95 GUN584 *Always assemble receiver with parts, by a qualified gunsmith who can check head spacing & fit for safety.