Section 1 (PDF - 3.7MB)

HICKORY SAW
& TOOL, INC.
406 9th Street S.E., Hickory, N.C. 28602
P.O. Box 2407, Hickory, N.C. 28603
Telephone: (828) 324-5585
1-800-762-9899
Fax: (828) 324-5588
1-800-762-6845
www.hickorysawandtool.com
Table of Contents
Cover page……………………………………………………………………….……..1-2
Dedicated Insert raised panel cutters……………………………..……………….…….3-4
Stile & rail cutter sets…………………………………………………………….……..5-6
Multi-profile cutters……………………………………………………………….…….7-8
Finger joint cutters………………………………………………………………….……..9
Pricing on Service work, saw blades, dado sets……………………………………...10-16
ICK Inserts……………………………………………………………………………17-18
Panel saws……………………………………………………………………………….19
Split scoring & conic scoring saws………………………………………………………20
Hogging units…………………………………………………………………….…..21-22
Type “C” four flute countersinks………………………………………………...………23
Woodworking drills, countersinks, multi-spur and boring bits………………………24-51
Diamond tipped cutters and router bits……………………………………………….52-53
Hydraulic and straight bore moulder heads…………………………………………..54-55
HSS, jointer and planer knives……………………………………………………….56-57
Tool holders & collets .…………………………………..…………………………..58-59
ONSRUD ……..………………………………………………………………….…60-126
Solid carbide bits……..……………………………………………………………127-130
Carbide tipped straight bits………………………………………………………...131-132
Stagger tooth & mortise bits…………………………………………………………....133
Round and half-round bits ………………………………………………………….….134
V-Groove, Panel, and cove bits…………………………………………………….…..135
Rabbeting, round-over, ogee, flush, and Laminate bits………………….………..136-140
Solid Surface and T-Slot bits……………………………………………………...141-142
Edge profile bits…………………………………………………………………...143-145
Handrail & Molding bits……………………………………………………………..…146
Glue joint bits……………………………………………………………………...147-148
Groove profiles…………………………………………………………………………149
MDF door profiles…………………………………………………………………...…150
Stile & rail router bits………………………………………………………………......151
Raised panel router bits……………………………………………………………..….152
Cabinet, Door & Drawer, Window Sash bits……………………………………...153-155
Dovetail bits…………………………………………………………………………….156
Spoilboard & Slotting....................……………………………………………………..157
Dowel drills & Boring Bits.................................... …………………………………….158
Bearings & Accessories……………………………………………………………159-160
Pricing for pages (127-160)………………………………………………………..161-166
Conversion Charts…………………………………………………………………167-169
Page 2
RAISED PANEL CUTTERS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the
elimination of set ups, because inserts bolt against precision machined seats. All inserts
have been designed for soft and hardwood, compound board and exotic hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 6” CUTTING CIRCLE
BORE: 1-1/4”
WINGS: 3
Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾”
spindle available upon request. Ball bearing rub collars are available upon request.
CUSTOM PROFILES AVAILABLE
Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and
Tool can produce cutting tools to your exact specifications from wood samples, drawings,
sketches, or existing tools.
MADE IN THE USA
These insert heads are produced in our Hickory, NC facility. Each cutting tool is
specifically designed for your needs according to your specifications to achieve the best
possible results.
Page 3
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
RAISED PANEL CUTTERS
Page 4
STILE AND RAIL CUTTER SETS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the
elimination of set ups, because inserts bolt against precision machined seats. All inserts
have been designed for soft and hardwood, compound board and exotic hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 4” SMALL CUTTING CIRCLE
BORE: 1-1/4”
WINGS: 3
Clockwise or Counterclockwise rotation; material runs face down; “T” Bushings for ¾”
spindle available upon request. Ball bearing rub collars are available upon request.
CUSTOM PROFILES AVAILABLE
Send us your pattern, and we will produce the tool to cut that profile. Hickory Saw and
Tool can produce cutting tools to your exact specifications from wood samples, drawings,
sketches, or existing tools.
MADE IN THE USA
These insert heads are produced in our Hickory, NC facility. Each cutting tool is
specifically designed for your needs according to your specifications to achieve the best
possible results.
Page 5
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
STILE AND RAIL CUTTER SETS
Page 6
MULTI-PROFILE CUTTERS
DETAILS
Available with solid carbide or S-Alloy inserts. Has a constant cutting circle for the
elimination of set ups. Utilizes HSS corrugated back backing plates so multiples of
profiles can be achieved using only one cutter by just changing the inserts and backers.
All inserts have been designed for soft and hardwood, compound board and exotic
hardwoods.
TECHNICAL SPECIFICATIONS:
DIAMETER: 4” SMALL CUTTING CIRCLE
BORE: 1-1/4”
WINGS: 3
Available in 40mm or 60mm wide; Clockwise or Counterclockwise rotation achieved
with same cutter; material runs face down; “T” Bushings for ¾” spindle available upon
request. Ball bearing rub collars are available upon request.
MOULDER & TENON HEADS ALSO AVAILABLE
These insert cutters can be supplied in any diameter and bore size per your requirements.
Hickory Saw and Tool can produce cutting tools to your exact specifications from wood
samples, drawings, sketches, or existing tools.
MADE IN THE USA
These insert heads are produced in our Hickory, NC facility. Each cutting tool is
specifically designed for your needs according to your specifications to achieve the best
possible results.
Page 7
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
MULTI-PROFILE CUTTERS
Page 8
Page 9
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
PRICE LIST FOR C.T. CIRCULAR SAW BLADES
=======================================================================
#OF TEETH
DIA. > 0 TO 18"
OVER 18" UP TO 36"
------------------------------------------------------------------------------------------------------------------------------0 - 29 . . . . . . . . . . . . . . . . . . . $10 . 00 . . . . . . . . . . .$16 . 00
30 - 40 . . . . . . . . . . . . . . . . . . . $14 . 00 . . . . . . . . . . .$24 . 00
41 - 60. . . . . . . . . . . . . . . . . . . . $15 . 00 . . . . . . . . . . . $25 . 00
61- 100. . . . . . . . . . . . . . . . . . . .$16 . 00 . . . . . . . . . . . $27 . 00
101 - 120. . . . . . . . . . . . . . . . . . $17 . 00 . . . . . . . . . . . $30 . 00
TIP REPLACEMENT
===================
U P TO .220 KERF . . . . . . . . . . . . . . . . . . . . . . . .$1 . 50 EA. TIP
OVER .220 KERF. . . . . . . . . . . . . . . . . . . . . . . SEE GROOVER TIP PRICE
COMPLETE RETIP
===================
TIP PRICE (X) NUMBER OF TEETH
(NO SHARPENING CHARGE)
==================================================================
DADO SETS
==================
DADO SAWS . . . . . . . . . . . . . . . . . . . . . . . . . . SEE SHARPENING PRICES
DADO FILLERS:
KERF
SHARPENING
TIP REPLACEMENT
-----------------------------------------------------------------------------------------------------------------------------------1 / 16 . . . . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA. TIP)
1 / 8 . . . . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA. TIP)
3 / 1 6 . . . . . . . . . . . . . . . . . $ 6 . 00 . . . . . . . . . . . . . . . . . . $4 . 00 (EA TIP)
1 / 4 . . . . . . . . . . . . . . . . . . . $ 8 . 00 . . . . . . . . . . . . . . . . . . $5 . 00 (EA. TIP)
5 / 16 . . . . . . . . . . . . . . . . . . . .$ 8 . 00 . . . . . . . . . . . . . . . . . . $6 . 00 (EA. TIP)
3 / 8 . . . . . . . . . . . . . . . . . . . . $ 8 . 00 . . . . . . . . . . . . . . . . . . $7 . 00 (EA. TIP)
1 / 2 . . . . . . . . . . . . . . . . . . . . $10. 00 . . . . . . . . . . . . . . . . . . $8 . 00 (EA. TIP)
RETIP. . . . . . . . . . . . . . . . .#OF TIPS (X) TIP PRICE
(NO SHARPENING CHARGE)
===================================================================
MISCELLANEOUS SAW CHARGES
OPENING BORE CHARGES
============================
UP TO 1" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 15 . 00
1" TO 1 1/2". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 20 . 00
1 1/2" TO 2 1/2". . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .$ 25 . 00
OVER 2 1/2" . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . $ 30 . 00
KEYWAYS
BUSHINGS
$20.00 EA
UP TO 1". . . . . .$ 15 .00
1" TO 2". . . . . .$ 20 .00
2 TO 3" . . . . .$ 25 .00
HAMMER AND ROLL FOR TENSION AND STRAIGHTNESS
UP TO 18" . . . . . . . . . . . . . . . . .$2 . 00 PER INCH OF DIAMETER
OVER 18" . . . . . . . . . . . . . . . . .$3 . 00 PER INCH OF DIAMETER
Page 10
PRICE LIST FOR SHARPENING CARBIDE TIPPED WING CUTTER
=========================================================================
# OF WINGS
CUTTING EDGE WIDTH
1 / 2"
1"
1-1/2"
2"
2-1/2"
3"
3-1/2"
4"
4- 1/2"
=========================================================================
2
$16.00 $16.00 $17.50 $17.50 $17.50 $20.50 $20.50 20.50 $22.50
3
$19.00
$19.00
$20.50
$23.00
$23.00
$23.00
$25.00 $25.00
$25.00
4
$20.00
$20.00
$22.50
$25.00
$25.00
$25.00
$27.50 $27.50
$27.50
6
$22.00
$22.00
$25.50
$29.00
$29.00
$29.00
$30.50 $30.50
$30.50
8
$25.00
$25.00
$28.00
$33.00
$33.00
$33.50
$35.50 $35.50
$35.50
10
$28.00
$28.00
$31.50
$36.00
$36.00
$36.50
$39.00
$39.00
$39.50
12
$28.00
$28.00
$31.50
$36.00
$36.00
$36.50
$39.00 $39.00
$39.50
(PRICE FOR OVER 4-1/2" WIDE: ADD $3.00 PER EACH 1/2" LARGER WIDTH)
(RETIP PRICES QUOTED UPON REQUEST PER CUTTER)
========================================================================
PRICE LIST FOR GROOVERS
# OF WINGS=====
KERF> 1 / 4"
3 / 8"
1 / 2"
5 / 8"
3 / 4"
=========================================================================
2 ...............................
$9.50
$10.00
$10.00
$11.50
$12.75
3 ...............................
$11.50
$11.75
$12.50
$13.25
$14.25
4 ...............................
$12.00
$12.25
$13.25
$14.00
$15.00
6 ...............................
$13.75
$14.50
$16.00
$16.50
$15.75
8 ...............................
$15.00
$15.75
$17.00
$18.00
$20.25
10 ...............................
$16.50
$17.25
$18.75
$19.75
$21.50
12 ...............................
$19.00
$20.50
$22.50
$23.00
$24.50
18 ...............................
$22.00
$23.50
$25.25
$26.00
$28.00
24 ...............................
$25.25
$26.50
$29.00
$30.00
$31.75
FOR KERFS OVER 3 / 4" GO TO CUTTER PRICE
TIP REPLACEMENT FOR GROOVERS
1 / 4"
$8.00
3 / 8"
$8.00
1 / 2"
5 / 8"
3 / 4"
$10.00
$12.00
$15.00
COMPLETE RETIP=+ #OF TIPS --NO SHARPENING CHARGE
Page 11
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
PRICE LIST FOR SHARPENING PROFILE HEADS
=========================================================================
# OF WINGS
-------------------------2
UP TO 6" LONG
--------------------------$22.50
OVER 6" LONG
-------------------------$24.00
4
$24.50
$26.00
6
$24.50
$32.00
8
$27.50
$32.00
FOR MORE WINGS GO TO MOULDER HEAD PRICE
====================================================================
TIP REPLACEMENT IN PROFILE HEADS
=====================================
1 / 4"
$8.00
3 / 8"
$9.00
1 / 2"
$10.00
5 / 8"
$11.00
3 / 4"
$13.00
COMPLETE RETIP = # OF TIPS
NO SHARPENING CHARGE
========================================================================
PRICE LIST FOR SHARPENING SPIRAL PROFILE HEADS
UP TO 6" LONG......$34.50
OVER 6" LONG.......$49.00
TIP REPLACEMENT ON SPIRALS QUOTED PER HEAD
=========================================================================
PRICE LIST FOR SHARPENING STAGGERED TOOTH MOULDER HEADS
WIDTH
ROWS OF TEETH
PRICE
4
4
$31.50
4
6
$33.50
4
8
$36.50
4
12
$43.50
6
6
$41.50
6
8
$49.00
6
12
$53.00
8
6
$55.00
8
8
$60.00
8
12
$70.00
10
6
$61.50
10
8
$65.00
10
12
$75.50
12
8
$83.00
12
12
$93.00
Page 12
PRICE LIST FOR MISC. ITEMS
=========================================================================
HSS AND C.T. CARVING CUTTERS
WIDTH:
0 TO 2" CEL. SHARPEN AND TURN DOWN COLLARS ------------------- $45.00
=========================================================================
HSS AND CT ROUTER BITS
STRAIGHT CUT ...................................................................................... $8.00
GROUND TO PATTERN 2 WING.......................................................... $19.00
GROUND TO PATTERN 4 WINGBUC....................................................$22.00
REGRIND ENDS .................................................................................... $ 2.50
CUT OFF ................................................................................................ $ 3.50
REPROFILE 2 X SHARPENING PRICE
================================================================
HAUNCHING CUTTERS ------SHARPENING
2 PC. X 3" MAX CEL.. ...................................................$ 35.00
3 PC. OR 3" PLUS CEL. ...............................................$ 47.50
RETIP - - 3/4" TO 1-1/2" ..................................................$ 105.00 EA. PC.
1- 9/16" TO 3" ..................................................$ 150.00 EA. PC.
========================================================================
STRAIGHT CUTTING EDGE CORR.BACK MOULDER KNIVES
HSS $1.00 PER INCH OF CEL.
C. T. $2.70 PER INCH OF CEL.
=========================================================================
GROUND TO PATTERN SHAPER & MOULDER KNIVES PER KNIFE
SHARPEN & REPROFILE - COST PLUS $10.00 TEMPLATE CHARGE
HSS WIDTH OF KNIFE:
1" - - - - - - - - - -2" - - - - - - - - - -3" - - - - - - - - - -4"
$13.00 - - - - - -$17.00 - - - - - $21.00- - - - - - -$22.00
-------------------------------------------------------------------------------------------REPROFILE ONLY - - - - - - - - - - - - - - $13.00 TEMPLATE CHARGE
-------------------------------------------------------------------------------------------C. T. WIDTH OF KNIFE:
1" - - - - - - - - - -2" - - - - - - - - - -3" - - - - - - - - - -4"
$19.00 - - - - - - $21.00 - - - - - - $23.00 - - - - - - -$25.00
Page 13
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
PRICE LIST FOR MISC. ITEMS
=========================================================================
DRILL SHARPENING HSS. AND C.T.
CARBIDE TIPPED
HSS BRADPOINT
1 / 8 " TO 1 / 2 " - - - $4.50 = = = = = = = = = == = = = UP TO 5 / 16 " - - - - - - - $2.00
33 / 64 " TO 1" - - - - - $5.50 = = = = = = = = = = = = = = 11 / 32 " TO 1 / 2"
$3.00
9 / 16 "TO 3 / 4"
$4.50
13 / 16 " TO 1-1 / 8 " - - - $6.50
=========================================================================
MULTI SPUR BIT SHARPENING
HSS SHARPENING
C.T. SHARPENING
UP TO 1-1 / 2 " DIA. - - - - - - $8.00 EA. . . . . . . . . . . . . . . . . . . . . . . . . . . $9.50 EA.
1 - 9 / 16 " TO 2 - 1 / 2 " - - $9.50 EA. . . . . . . . . . . . . . . . . . . . . . . . . . . $11.00 EA.
2 - 9 / 16 " TO 3 - 1 / 2 " - - $10.00 EA . . . . . . . . . . . . . . . . . . . . . . . . . . $12.50 EA.
OVER 3 - 1 / 2" - - - - - - - -$14.00 EA .. . . . . . . . . . . . . . . . . . . . . . . . . . $16.00 EA.
MULTI SPUR TIP REPLACEMENT - - - - - - - - -1 - 4 TIPS . . . . . . .$ 10.00 EA. TIP
5 + TIPS . . . . . . . . . . .$ 9.00 EA. TIP
CHIP LIFTERS. . . . . . . . .$ 25.00 EA. TIP
=========================================================================
STEEL MOULDER FEED WHEEL SHARPENING
UP TO 2 " - - - - -$65.00 EA - - - - - - - - - -2 " TO 3 " - - - - - - - - - -$80.00 EA.
OVER 3 " WIDE ADD $10.00 PER INCH OF WIDTH
(STANDARD FEED WHEELS ONLY - OTHERS QUOTED UPON REQUEST)
REMILLING GROOVES IN FEED WHEELS - - - - - - - - - - - -$60.00 EA.
REHARDENING FEEDWHEELS - - - - - - - - - - - - - - - - - - - -$35.00 EA.
=========================================================================
BANDSAW GUIDE WHEELS
# 0 WHEELS - - - -$ 110.00 EA . . . . . . . . . . . . . . .# 1 WHEELS - - - -$ 120.00 EA.
=========================================================================
BANDSAW GUIDE JAWS
PLAIN JAWS
C. T. JAWS
# 0 - - $80.00 EACH SET OF 4 PCS....................0 - - $ 110.00 EACH SET OF 4 PCS.
# 1 - - $90.00 EACH SET OF 4 PCS....................1 - - $ 120.00 EACH SET OF 4 PCS.
RETIP BANDSAW GUIDE PRICE - - - - - -$ 10.00 PER END
TANNEWITZ R - 84 AND R- 84A JAWS PLAIN AND CT ARE AVAILABLE
BANDSAW THROAT PLATES - - - - -SQUARE $ 38.00 EA. ROUND $48.00 EA.
=========================================================================
Page 14
PRICE LIST FOR BANDSAW BLADES AND ROLL STOCK
===================================================================
LENGTH
WIDTH
(IN FEET)--1/8
3 / 16
1/4
3/8
1/2
3/4
-----------------------------------------------------------------------------------------------------------------------------------9
10.50
10.50
10.50
10.50
10.50
13.00
-------------------------------------------------------------------------------------------------------------------------------------10
11.00
11.00
11.00
11.00
11.00
13.00
-------------------------------------------------------------------------------------------------------------------------------------11
11.50
11.50
11.50
11.50
11.50
15.00
-------------------------------------------------------------------------------------------------------------------------------------12
12.00
12.00
11.50
11.50
11.50
15.00
-------------------------------------------------------------------------------------------------------------------------------------13
12.50
12.50
11.50
11.50
11.50
16.00
-------------------------------------------------------------------------------------------------------------------------------------14
13.00
13.00
12.50
12.50
12.00
16.00
-------------------------------------------------------------------------------------------------------------------------------------15
13.50
13.50
12.25
12.25
12.25
17.00
-------------------------------------------------------------------------------------------------------------------------------------16
14.00
14.00
13.00
13.50
14.00
18.00
-------------------------------------------------------------------------------------------------------------------------------------17
14.00
14.00
13.00
13.50
14.00
19.00
-------------------------------------------------------------------------------------------------------------------------------------18
15.00
15.00
13.50
14.50
14.50
20.00
-------------------------------------------------------------------------------------------------------------------------------------19
16.50
16.50
15.00
15.50
16.00
22.00
-------------------------------------------------------------------------------------------------------------------------------------20
17.00
17.00
15.00
15.50
16.00
22.00
-------------------------------------------------------------------------------------------------------------------------------------21
17.50
17.50
16.00
16.50
17.00
22.00
-------------------------------------------------------------------------------------------------------------------------------------22
18.00
18.50
16.00
17.50
17.00
22.00
-------------------------------------------------------------------------------------------------------------------------------------FOR IN BETWEEN SIZES GO TO THE NEXT LONGER SIZE
ALL WOOD CUTTING BLADES UP TO 8' LONG - - -$9.00 EA
STANDARD METAL CUTTING 64-1/2" X 1 / 2 - - -$10.00 EA
BANDSAW STOCK ROLL PRICES
1 / 4 - - - -$125.00
1 / 2 - - - -$167.00
UP TO 1 / 2 WIDE - - - -$4.00
.025 OR .032 THICK
3 / 8 - - - -$139.00
3 / 4 - - - -$175.00
WELD PRICES
OVER 1 / 2 WIDE - - - -$5.00
BI-METAL BLADES - - - $10.00
SHARPENING CHARGE FOR BLADES
UP TO 3 / 4 WIDE - - - -$4.50
OVER 3 / 4 WIDE - - - -$9.00
SHARPENING CHARGE FOR SPIRAL ROUTER BITS
UP TO 1/2"DIA. 2 WING UPCUT OR DOWNCUT ...........$10.00
5/8"DIA. AND UP................................................$15.00
3 WING AND UP (ANYSIZE)..................................$15.00
SPIRAL COMPRESSION......2 FLUTE......$15.00
......4FLUTE........$25.00
Page 15
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
NEW CARBIDE TIPPED SAWS (FLAT A.T.B. & T. CHIP)
=========================================================================
DIAMETER
NO. TEETH
8"
10"
12"
14"
16"
18"
=========================================================================
20
$70.25
72.75
$78.75
82.75
$87.00
$90.50
24
$77.00
78.75
$89.00
92.75
$95.25
$100.50
30
$92.50
95.00
$96.50
98.00
$102.50 $106.50
36
$100.00 102.00 $103.75 106.00
$110.00 $112.50
40
$104.75 106.25 $108.50 112.50 $118.25 $121.75
48
$114.25 116.00 $118.25 122.25 $128.25 $132.00
60
$128.25 129.75 $133.75 137.75 $139.25 $145.00
72
$143.00 144.50 $148.75 152.50 $156.50 $159.75
80
$163.50 165.50 $167.75 173.50 $177.00 $180.50
90
-------- ---------- $187.25 191.25 $195.00 $198.50
96
------- --------$194.25 198.25 $202.00
$206.00
100
-------- --------- $204.75 210.75 $214.50
$217.50
120
----------------------- 235.25 $243.00
$243.00
DADO HEADS
DADO SAWS------PER ABOVE SAW SCHEDULE
NEW DADO FILLERS:
1 / 16"
1 / 8"
1 / 4"
===================================================================
10” X 5/8 OR 1” BORE….
12” X 1” BORE…………...
14” X 1” BORE………….
$34.50
$36.50
$41.25
$35.25
$37.00
$56.50
$47.25
$60.50
$68.25
(Providing filler blanks are available)
BORING CHARGES FOR NEW SAWS ONLY
UP TO 1” ..................................... $15.00
1” TO 1- 1 / 2 “................................
$20.00
1- 1 / 2” TO 2- 1 / 2 “.......................
$25.00
Page 16
35°
Standard reversible knives
Standard Wendeschneidplatten
Plaquettes reversibiles standard
Coltelli reversibili standard
Cuchillas reversibles standard
L
W
T
a
T04F
T03SMG
T10MG
TL15
T08SMG
mm
mm
mm
mm
7.5
8.6
9.0
12.0
12.0
12.0
1.5
1.5
1.5
12001
13182
12043
13811
13963
13734
14225
9.6
10.0
10.5
12.0
12.0
12.0
1.5
1.5
1.5
12015
13165
13167
13850
14010
30833
11.0
11.6
13.0
12.0
12.0
12.0
1.5
1.5
1.5
13168
13183
13170
13.6
14.6
15.0
12.0
12.0
12.0
1.5
1.5
1.5
13185
13186
12003
13819
13972
13741
14232
15.7
16.0
17.0
12.0
12.0
12.0
1.5
1.5
1.5
13172
13203
13173
18.0
12.0
1.5
13174
19.0
20.0
25.0
12.0
12.0
12.0
1.5
1.5
1.5
13175
12004
12025
13823
13853
13977
14013
13745
13766
14235
25.0
30.0
35.0
12.0
12.0
12.0
1.5
1.5
1.5
14.0
14.0
26.0
12011
12005
13208
13843
13828
14001
13982
13759
13749
14239
40.0
50.0
60.0
12.0
12.0
12.0
1.5
1.5
1.5
26.0
26.0
26.0
12014
12006
12007
13847
13834
13839
14006
13987
13994
13763
13753
13754
14255
14244
14248
T08MF
T03SMG
T10MG
TL15
T08SMG
L
W
T
a
mm
mm
mm
mm
2.2
2.2
2.2
60.0
60.0
60.0
12008
12009
12010
13841
30831
30832
13997
13998
13999
13755
13756
13757
T04F
T03SMG
T10MG
TL15
80.0 13.0
100.0 13.0
120.0 13.0
L
W
T
a
mm
mm
mm
mm
20.0
9.0
1.5
24.0
30.0
40.0
50.0
9.0
9.0
9.0
9.0
1.5
1.5
1.5
1.5
T08SMG
13195
14.0
14.0
26.0
26.0
13197
13199
13200
13201
Page 17
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
Standard reversible knives
Standard Wendeschneidplatten
Plaquettes reversibiles standard
Coltelli reversibili standard
Cuchillas reversibles standard
For Holz-Her system*
L
W
T
d
mm
mm
mm
mm
T08MF
10.5 10.5
12.0 12.0
13.0 13.0
1.5
1.5
2.5
35°
35°
35°
4.0
4.0
4.0
17.0 17.0
17.0 17.0
19.0 19.0
2.0
2.0
2.0
35°
35°
35°
3.0
4.0
4.0
10.5
13.0
13.6
13.6
10.5
13.0
13.6
13.6
1.5
2.5
2.0
2.0
35°
30°
30°
45°
13324
13299
37522
14.0
14.0
14.0
14.0
14.0
14.0
14.0
14.0
1.2
1.7
1.7
2.0
30°
22°
30°
30°
13295
13297
13307
13273
14.0 14.0
1.2
30°
13303
14.3 14.3
14.6 14.6
15.0 15.0
2.5
2.5
2.5
35°
30°
30°
14.0 14.0
15.0 15.0
15.0 15.0
2.0
2.5
2.5
30°
30°
30°
15.0 15.0
2.5
30°
14.0 14.0
2.0
30°
21.0 21.0
5.5
40°
T04F
T03SMG
T10MG
TL15
13259
12002
13863
13815
14027
13968
13769
13737
16564
13265
13264
13864
30838
30830
30827
13770
30826
13328
16565
13266
40343
13260
13865
14028
13329
13314
13315
13276
43895
13320
R=50
R=150
44289
44486
22695
Page 18
13771
Page 19
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
Page 20
Page 21
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845
Page 22
Fuller
Countersinks · Counterbores · Tapered Drills · Plug Cutters · Step Drills · Stop Collars
Type ‘C’ Four Flute Countersinks
Stock
Number
C8
Used to countersink and counterbore for heads of screws in woods,
plastics and non-ferrous materials. Heat treated for long tool life.
(see explanation on page 3 and size recommendations on page 4)
C4
The countersink is held in place with two hex-socket screws and is easily
adjustable up and down the drill so only one countersink and length of drill is
required for one screw size.
C92
Shown above Mounted on a Taper Point Drill with Stop Collar:
This combination of Tapered Drill and Countersink, drills,
Countersinks and Counterbores in one quick operation. Makes
driving screws easier and assures the best possible holding power.
Designed for clean cutting and hardened for long wear. Complete
list of Taper Point Drills shown on page 6 & 7. Stop Collar (shown
above mounted on Type “C” Countersink) can be furnished to
control depth of cut. Stop Collar sizes are shown on page 6.
C16
Shown above Mounted on a Brad or Regular Point Drill:
This combination can be used to drill and countersink clearance
through the material for screws and bolts or to drill pilot holes for
other types of screws. The Countersinks can also be mounted on
ordinary straight twist drills allowing the screw thread to cut its
own hole or by using correct pilot drill size for root diameter of
thread allowing shank of screw to force its way into the wood. See
Screw Chart on page 4 for screw sizes.
C244
Drills are not included unless specified. Types and sizes are shown
on pages 36 through 42. To cut wood plug to fit in hole over head
of screw, use matching Plug Cutter shown on page 9.
Special sizes - Quotation on request.
For left hand cutting add 50% to prices shown in price list and add
L to stock number.
Price includes two hex-socket set screws. Does not include drill or
stop collar. See page 118 &119 for replacement set screws and hex
keys.
Also see page 117 for all sizes of Countersinks mounted on
Taper Point Drills (and Stop Collars if required).
C324
Page 23
C2
C3
C4
C44
C65
C410
C411
C43
C56
C57
* C5
* C6
* C7
* C8
* C9
C913
C97
C105
C1011
C103
* C10
C1014
C104
C122
C129
C125
C1211
* C92
* C102
* C12
C1415
* C14
C145
* C143
C167
* C16
C1617
* C169
C1619
* C18
C243
C247
C244
C245
C20
C24
C284
C285
C286
C287
C324
C326
C328
Stock Sizes
Drill
Cutting
Hole
Diameter
Size
1/4
1/4
5/16
5/16
5/16
5/16
5/16
5/16
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
3/8
7/16
7/16
7/16
7/16
7/16
7/16
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
1/2
5/8
5/8
5/8
5/8
5/8
5/8
5/8
5/8
3/4
3/4
3/4
3/4
3/4
3/4
7/8
7/8
7/8
7/8
1
1
1
5/64
3/32
7/64
1/8
9/64
5/32
11/64
3/16
3/32
7/64
1/8
9/64
5/32
11/64
3/16
13/64
7/32
5/32
11/64
3/16
13/64
7/32
1/4
1/8
9/64
5/32
11/64
3/16
13/64
7/32
15/64
1/4
5/32
3/16
7/32
1/4
17/64
9/32
19/64
5/16
3/16
7/32
1/4
5/16
21/64
3/8
1/4
5/16
3/8
7/16
1/4
3/8
1/2
Overall
Length
3/4
3/4
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
7/8
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/16
1-1/8
1-1/8
1-1/8
1-1/8
1-1/8
1-1/4
1-1/4
1-1/4
1-1/4
1-3/8
1-3/8
1-3/8
1-1/2
Hickory Saw & Tool 1-800-762-8999
Fax 1-800-762-6845