- Jeulin SA
Transcription
- Jeulin SA
DIMENSIONS Model Mounted Trailed 3.80 3.80 Overal length mm 3200 4000 Body length mm 2200 2200 Body length behind the rotor mm 1800 1800 Loading length mm 1600 1600 Inside body width mm 1450 1450 Overal width mm 2370 2450 Body height mm 1220 1220 Put down machine height with lateral chute mm 2000 2000 Put down machine height with mono-chute mm 2400 2400 Body volume m 3 Mobile axle Oui Pneumatics 10/75 x 15.3 Empty weight kg 2000 2200 CE norms and DREAL homologation S.A. HEAD OFFICE : Z.I. Nord - Villebarou - 3 rue des Mardeaux 41000 VILLEBAROU (Blois) - France The information provided is not contractual. The manufacturer reserves the right to modify without notice this equipment’s specifications. Févreir 2015 Tel. : +33 (0)2 54 20 06 27 Fax : +33 (0)2 54 20 87 11 E-mail : [email protected] Website : www.jeulinsa.fr Janvier 2015 POST ADDRESS : 3 rue des Mardeaux - CS 34311 - 41043 BLOIS CEDEX - France SILAGE SILAGE--FEEDER STRAW STRAW--BLOWER DISPENSER MOUNTED OR TRAILED Hélios DP is a silage feeder straw-blower dispenser (mounted or trailed) born from the straw blower dispesner Hélios PA. This silage feeser has the same shredder rotor mechanically driven by durable beltque as the straw-blower. Hélios DP carries out a clear and precise silage feeding thanks to its rounded shovel inspired from the Sirius DP range. Bedding on the right up to 18m, on the left and backside if adding the 300° hydraulic rotation kit to the mono-chute. Hélios DP accept rounded bales up to Ø 1,70 m and with square bales of L 1,50 m. Depending on chosen additional equipment, it may dispense grass or corn silage, long wisps feeding (hay, grass or others wrapped products) SILAGE SILAGE--FEEDER STRAW STRAW--BLOWER DISPENSER MOUNTED OR TRAILED 6 15 8 5 4 14 Possible Impossible ADDITIONAL EQUIPMENT 1 Hydraulic kit to adapt the rotation at 300° of the chute Feeding and bedding chute orientation front and back 30° on the right side 14 3 Hydraulic cylinder on the chute cap 17 Kit to dispense wrapped bales (+15sections, +3 reteners) Kit of additional blades on the rotor (15) 10 2 Hydraulic driving of the rotor Multi-disc clutch hydraulic oil bath for mechanical driving of the rotor Silage footbridge with double electric control 4 functions (arms, shovel, conveyor, axle) Hydraulic speed shifting with electric control on the blower box Rear articuled light in accordance with the Highway code 16 Standard Wide angle PTO transmission machine side with protection of trailed 4 Articuled beam Trailed kit after delivery 13 Standard 9 12 11 7 Hydraulic speed shifting Mono-chute, dispensing - bedding hydraulic rotation at 300°. Multi-disc clutch, hydraulic oil bath Hydraulic cylinder on chute cap STANDARD EQUIPMENT 3 4 5 6 7 8 9 10 11 12 13 14 15 Driving on the floor conveyor by moto reductor oil bath, front and rear side with electric adjustable speed Indicator on the rotation’s way of the floor conveyor Monobloc body Dual floor with spring trap door for easy cleaning Bolted housing on hinges Rubber against dust Electric control of all the functions with a mobile control box in the tractor’s cab Linkage bar category 3 Hydraulic driving of the rotor PTO transmission 540 rpm with protection, safety bowl machine side + TRAILED EQUIPMENT 16 17 Drawbar with linkage bar provided category 2 Hydraulic axle pivot activated by 2 cylinders Parking brake and hydraulic brake Light in accordance with the Highway code Manual kickstand with holds Kit to dispense wrapped bales ( +15 sections, +3 reteners) Articuled beam. Mounted model TRACTOR EQUIPMENT 1 PTO for 540 rpm Electric plug 12v/3 pin for the valves Electric plug 12v/7 pin for the light (trailed machine) Hydraulic distributor 1 SE with direct return Minimum of flow 25L/mn Trailed model Février 2015 2 Rounded shovel 2 cylinders on arms 2 cylinders on the silage shovel Indicator of the shovel position Water tightness plate on the shovel retractable with springs 1 shredder rotor mechanically driven by durable belt and automatic tightening equipped with 15 big blades predisposed to wrapped silage Chamber with 2 retainers Blower Ø 1600 mm composed of 8 removable paddles Visit trap door 2 speed gearbox (feeding 270 rpm - bedding 540 rpm) with free wheel Blower housing width 320mm in anti abrasive steel ( Brinel 430 hb, 120kg steel) Mono-chute feedding and bedding activated by 1 cylinder or lateral chute on the right hand side for feeding and beeding activated by 1 cylinder High-strength Marine chain Ø 10 on the floor conveyor, bars in removable rectangular tubes with manufactured ends Février 2015 1