Convertamatic™ 24, 26, 28, 32 BA 625, 725, 825

Convertamatic™ 24, 26, 28, 32
BA 625, 725, 825
Parts List
Advance Models: 56315000(24D-C), 56315001(26D), 56315002(28D),
56315003(24C-C), 56315004(28D-C), 56315005(28C-C), 56315006(X24D-C),
56315007(X24C-C), 56315008(26D-C), 56315009(X26D-C), 56315010(26C-C),
56315011(X26C-C), 56315012(X28D-C), 56315013(X28C-C), 56315804(32D-C)
56315805(X32D-C)
Nilfisk Models: 56315800(625), 56315801(725), 56315802(725C), 56315803(825)
11/04 revised 1/07 FORM NO. 56042451
BOOK E SECTION 18.3.1
04-11
TABLE OF CONTENTS
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
07-2
DESCRIPTION
BOOK E
E 18.3.1
1
PLAN
Chassis System ......................................................................................E-18.3.1-3
Chassis System (squeegee linkage assy before SN1915725) ..............E-18.3.1-5
Chassis System (squeegee linkage assy after SN1915724) .................E-18.3.1-7
Decal System..........................................................................................E-18.3.1-9
Recovery System..................................................................................E-18.3.1-11
Scrub System-Disk (24”, 26”, 28”) ........................................................E-18.3.1-13
Scrub System-Disk (32”).......................................................................E-18.3.1-15
Scrub System-Cylindrical......................................................................E-18.3.1-17
Solution System / Electrical-1 ...............................................................E-18.3.1-19
Solution System / Electrical-2 ...............................................................E-18.3.1-21
Chemical Assembly (AXP Models Only) ...............................................E-18.3.1-23
Paddle Assembly ..................................................................................E-18.3.1-25
Squeegee Assembly .............................................................................E-18.3.1-27
Wiring Diagram .....................................................................................E-18.3.1-29
Optional Kits & Accessories ..................................................................E-18.3.1-30
Brush Selector Guide-Disk ...................................................................E-18.3.1-31
Brush Selector Guide-Cylindrical ..........................................................E-18.3.1-32
WHEN ORDERING PARTS
*
Use the 8 digit numbers from the “Ref. No.” columns in this parts list.
*
Specify the model and serial number of the machine.
*
Use the space below to record the model and serial number for future reference.
Model
Serial No.
FORM NO. 56042451
E
BOOK E
18.3.1 2
FORM NO. 56042451
CHASSIS SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
05-12
04-11
07-2
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
*
*
*
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
CHASSIS SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56003312
56003389
56370878
56001879
56001939
56001954
56002022
56002708
56002768
56002832
56002988
56003179
56003405
56003435
56003637
56009241
56900033
56219932
56244991
56262180
56315115
56315062
56315377
56315378
56315379
56315076
56315080
56315108
56315111
56315154
56315165
56315179
56315234
56315239
56315258
56315260
56315296
56365555
56391802
56409152
56756364
56315607
56412182
56009051
56467544
56002220
56900756
Nut, Hex Nyl Loc M12-1.75
Nut, Hex Nyl Loc M8-1.25
Bearing, Sleeve
Wsh, Flt SAE 1/2
Wsh, Flt SAE 5/16
Wsh, Flt SAE #10
Wsh, Flt SAE 5/8
Nut, Hex Nyl Loc 1/4-20
Nut, Hex Nyl Loc 10-24
Nut, Hex Nyl Loc-Thin 10-24
Scr, Hex Hd SS 5/16-18x.62
Scr, Hex Thd To Hd M8-1.25x20mm
Nut, Hex Nyl Loc SS M8x1.25
Scr, Hex Hd SS 8-1.25x20mm
Scr, Hex M12-1.75x40mm
Scr, Hex Hd 3/8-16x4.25
Barb, 90 Elbow 3/8 X 1/2 Npt
Clamp, Hose SAE #6
Hose, PVC .375
Hose, Spiral .500
Wheel, Drive TSBUS2006-941
Transaxle, 24V (M1)
Motor
Carbon Brush
Neoprene Mounting Sleeve
Weldment, Chassis TSBUS2005-895
Bushing
Pump, 24VDC (M7)
Cylindrical Mount
Bushing, Spacer
Assembly, Squeegee Linkage
Linkage Arm
Plate
Linkage Arm NOTE #1 / TSBUS2007-957
Shim
Bracket, Filter Mount
Solution Filter
Caster Swivel 4.0x2.0
Hose, Spiral .375
Barb, 90 Elbow 1/2 X 1/2npt
Clamp, Hose SAE #4
Ball Valve
Nipple, Hex 3/4-14
Scr, Pan Phil Thd Form 8-32 x .38
Chain
Wsh, Flt STD 5/16
Clip, Conduit
2
4
2
2
4
2
4
10
2
1
3
4
4
4
2
1
1
2
1
1
2
1
1
4
2
1
2
1
2
1
1
2
2
1
2
1
1
1
1
1
4
1
1
1
1
2
1
BOOK E
E 18.3.1
3
* = Not Shown
NOTE #1: Linkage Arm 56315239 is no longer used as of TSBUS2007-957.
FORM NO. 56042451
E
BOOK E
18.3.1 4
FORM NO. 56042451
CHASSIS SYSTEM (squeegee linkage assy before SN1915725)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
06-4
04-11
06-4
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
CHASSIS SYSTEM (squeegee linkage assy before SN1915725)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56315165
56185264
56250414
56324350
56331076
56471220
56475480
56001833
56001836
56002098
56002840
56002850
56002852
56002901
56003123
56003682
56003692
56009084
56315082
56315151
56315153
56315180
56315196
56315240
56315245
56315295
56315338
Squeegee Linkage Assembly
Bearing, Flange
Bearing, Flange
Wheel
Collar
Bushing
Knob
Scr, Hex Hd 1/4-20x1.50
Scr, Hex Hd 1/4-20x.62
Wsh, Flt SAE 1/4
Nut, Hex Nyl Loc-Thin 1/4-20
Nut, Hex Nyl Loc-Thin SS 1/4-20
Nut, Hex Nyl Loc-Thin SS 3/8-16
Scr, Hex Hd SS 1/4-20x1.50
Scr, Soc Set 10-24x.38
Scr, Soc Shd .50 X .50 X 3/8-16
Scr, Soc Shd .50 X .75 X 3/8-16
Scr, Soc Set Loc 10-24x.19
Pin
Bracket, Squeegee Mount
Bracket, Wheel
Bracket, Squeegee Level
Weldment, Squeegee
Rod, Adjustment
Bushing, Squeegee Cable
Spring, Extension
Linkage Arm
1
8
2
1
2
1
1
1
2
1
3
1
8
1
1
6
2
2
1
1
1
1
1
1
1
2
4
BOOK E
E 18.3.1
5
FORM NO. 56042451
E
BOOK E
18.3.1 6
FORM NO. 56042451
CHASSIS SYSTEM (squeegee linkage assy after SN1915724)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
06-4
04-11
06-4
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
CHASSIS SYSTEM (squeegee linkage assy after SN1915724)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56315165
56324350
56331076
56315580
56475480
56001833
56001836
56002063
56002091
56002098
56002840
56002850
56002852
56002901
56003123
56009084
56250414
56315048
56315067
56315068
56315082
56315151
56315153
56315196
56315240
56315245
56315295
56315713
56002940
Squeegee Linkage Assembly
Wheel
Collar
Bushing
Knob
Scr, Hex 1/4-20 X 1.50
Scr, Hex 1/4-20 X .62
Wsh, Flt SAE 3/8
Scr, Hex 3/8-16 X 2.00
Wsh, Flt SAE 1/4
Nut, Hex Nyl Loc-Thin 1/4-20
Nut, Hex Nyl Loc-Thin Ss 1/4-20
Nut, Hex Nyl Loc-Thin Ss 3/8-16
Scr, Hex SS 1/4-20 X 1.50
Scr, Soc Set 10-2 4x .38
Scr, Soc Set Loc 10-24 X .19
Bearing, Flange
Linkage Arm, Molded
Spacer, Phenolic
Spacer, Phenolic
Pin
Bracket, Squeegee Mount
Bracket, Wheel
Weldment, Squeegee
Rod, Adjustment
Bushing, Squeegee Cable
Spring, Extension
Bracket, Squeegee Level
Wsh, Flt SAE SS 5/8
1
1
2
1
1
1
2
14
8
1
3
1
8
1
1
2
2
4
6
2
1
1
1
1
1
1
2
1
2
BOOK E
E 18.3.1
7
FORM NO. 56042451
E
BOOK E
18.3.1 8
FORM NO. 56042451
DECAL SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
Item
1
2
3
4
5
6
7
DECAL SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56014601
56016688
56016689
56315706
56315830
56315831
56315832
56016690
56016691
56054192
56016349
56317130
Decal, Caution
Decal, Battery Wiring
Decal, Convertamatic Advance only
Decal, Convertamatic AXP Advance AXP models only
Decal, BA625 Nilfisk only
Decal, BA725 Nilfisk only
Decal, BA825 Nilfisk only
Decal, Circuit Breaker
Decal, Ladder Diagram
Decal, Charger
Decal, Advance Advance only
Decal, Nilfisk Nilfisk only
1
1
2
2
2
2
2
1
1
1
1
1
BOOK E
E 18.3.1
9
FORM NO. 56042451
E
BOOK E
18.3.1 10
FORM NO. 56042451
RECOVERY SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
Item
1
2
3
*
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
RECOVERY SYSTEM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56315375
56315847
56412154
56412218
56412300
56397098
56001906
56001993
56002053
56477613
56002098
56002145
56002849
56002896
56002919
56003003
56009005
56315346
56305464
56397142
56315088
56315093
56315096
56315098
56315099
56315102
56315141
56315220
56315257
56315268
56315272
56315293
56315303
56440213
56315840
Foam, Acoustical Advance only
Foam Tube Assembly Nilfisk only
Gasket, Vacuum Duct
Motor, Vac 24vdc (M4) Advance only
Motor, Vac 24vdc W/Filter (M4) Nilfisk only
Carbon Brush set of 2 (for 56412218 & 56412300)
Wsh, Flt STD 1/4
Scr, Pan Phil 10-24x.50
Wsh, Flt STD #10
Tie, Cable
Wsh, Flt SAE 1/4
Scr, Pan Phil 1/4-20x.50
Nut, Hex Nyl Loc-Thin SS 10-24
Scr, Pan Phil SS 10-24x.62
Wsh, Flt STD SS #10
Scr, Pan Phil 5/16-18x.62
Scr, Pan Phil SS Type B 10-16 x .75
Plate
Plug,3/4 Hex Pipe
Drain Hose
Tank, Recovery
Cover, Recovery Tank
Switch, Electromagnetic (S4)
Gasket
Screen, Fan Inlet
Shroud, Vac Motor
Mount, Vibration
Gasket, Recovery Lid
Clamp, P
Vac Hose Assy.
Cable Assy
Hinge
Retaining, Strap
Clamp, Hose SAE #32
Duct, Vac Inlet Nilfisk only
1
1
1
1
1
1
1
5
4
2
3
3
2
2
4
1
2
1
1
1
1
1
1
1
1
1
3
1
1
1
1
1
2
2
1
BOOK E
E 18.3.1 11
* = Not Shown
FORM NO. 56042451
E
BOOK E
18.3.1 12
FORM NO. 56042451
SCRUB SYSTEM - DISK (24”, 26”, 28”)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
17
18
19
20
*
*
21
22
SCRUB SYSTEM - DISK (24”, 26”, 28”)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56002959
56324350
56001879
56002910
56002938
56003120
56003335
56003438
56003472
56003477
56003533
56003674
56003679
56003693
56009107
56257534
56314031
56315588
56315587
56315586
56315056
56315376
56397138
56315060
56315161
Pin, Cotter Hair NOTE #3 / TSBUS2007-957
Wheel
Wsh, Flt SAE 1/2 NOTE #3 / TSBUS2007-957
Wsh, Flt SAE SS 3/8
Wsh, Flt SAE SS 5/16
Pin, Cotter Hair .0915 X .375
Scr Hex Loc SS 5/16-18 X .88
Nut, Hex Nyl Loc SS M10x1.5
Scr, Soc Shd .38 X 1.00 X 5/16-18
Scr, Hex Loc SS M8-1x25mm
Scr, Hex Hd SS M10-1.5x20mm
Scr Hex Loc SS 3/8-24 X .62
Pin, Ring .50 X 1.63
Rivet, Nylon Tree Push-In (.218)
Wsh, Flt SS .378 X 1.000 X .120
Hose, Pvc .375
Hub, Drive
Scrub Deck, Disc, Cast, 28 NOTE #2
Scrub Deck, Disc, Cast, 26 NOTE #2
Scrub Deck, Disc, Cast, 24 NOTE #2
Asm, Motor And Gear Unit, .42hp (M2 / M3)
Carbon Brush
Brush Spring
Hose, Pvc .375
Pin
3
1
2
8
7
2
2
4
1
6
4
8
2
3
2
1
2
1
1
1
2
4
4
1
1
Item
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
*
*
BOOK E
E 18.3.1 13
Ref. No. Qty
Description
56315718
1
56315719
1
56315275
56315274
56315754
56315753
56315752
56315339
56396080
56396081
56397300
56002938
56003405
56003436
56009030
56009096
56407053
56314030
56397081
56315389
56315373
56002769
56315759
56315742
1
1
1
1
1
1
1
1
1
3
3
3
1
1
2
1
1
1
1
4
1
1
Weld’t, Deck Actuator (24” / 26”) NOTE #2
NOTE #3 / TSBUS2007-957
Weld’t, Deck Actuator (28”) NOTE #2
NOTE #3 / TSBUS2007-957
Skirt, Rubber (26”)
Skirt, Rubber (24” & 28”)
Bumper, Extruded (28”) NOTE #4
Bumper, Extruded (26”) NOTE #4
Bumper, Extruded (24”) NOTE #4
Bracket
Lug, Counterclockwise (30-37)
Lug, Clockwise (30-37)
Tee, Barb NOTE #1
Wsh, Flt SAE SS 5/16
Nut, Hex Nyl Loc SS M8-1.25
Scr, Hex Hd SS M8-1.25 x 25mm
Scr, Pan Phil Thd Form 10-24 x .38
Wsh, Flt .193 x .875 x .060
Thermoid Disk
Brush Holder
Spring Retainer
Weld’t, Deck Mount Brkt, LHS NOTE #2
Weld’t, Deck Mount Brkt, RHS NOTE #2
Nut, Hex Nyl Loc 3/8-16 NOTE #2
Band Clamp (28”)
Band Clamp (24” & 26”)
56315838
56413883
2
2
Harness, Filter Nilfisk only
Ferrite Bead Nilfisk only
* = Not Shown
NOTE #1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose (56456830) to the scrub deck
has been replaced in production with a single 1/2” diameter hose (56264318). If ordering Tee 56397300 for a machine with this previous design solution hose you will also need to
order Solution Hose 56264318. See NOTE #1 on SOLUTION SYSTEM / ELECTRICAL-1.
NOTE #2: The Deck Casting (item #19) has been redesigned. The old style castings (56315053 - 28”, 56315054 - 26” & 56315055 – 24”) are no longer available. If you have a
machine built prior to this change (old style deck assembly DOES NOT include items 38 & 39) and need to replace one of these deck castings you need to order one of the kits
listed below. These kits include items (8, 11, 14, 19, 23, 38, 39, 40).
Old Deck
56315053 (28”)
56315054 (26”)
56315055 (24”)
Order Kit
56315727
56315726
56315725
NOTE #3: Actuator Weldment Item #23 has been redesigned to accommodate a new upper deck linkage arm (see Solution System / Electrical-1 / TSBUS2007-957). The
redesigned weldment is backwards compatible to the previous design. The new design does not use item #3 and the quantity of item #1 is reduced to 2.
NOTE #4: Extruded Bumpers PNs 56315318, 56315277 & 56315276 are obsolete. If you need to replace one of these bumpers please order one of the kits listed below.
Old Bumper
56315318 (28”)
56315277 (26”)
56315276 (24”)
Order Kit
56315764
56315763
56315762
FORM NO. 56042451
E
BOOK E
18.3.1 14
FORM NO. 56042451
SCRUB SYSTEM - DISK (32”)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
Item
SCRUB SYSTEM - DISK (32”)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
*
*
22
23
24
25
26
27
28
29
30
31
32
33
34
35
56002769
56002850
56002859
56002910
56002938
56002959
56002990
56003120
56003335
56003338
56003438
56003477
56003533
56003679
56003693
56009022
56009107
56049261
56100764
56314031
56315056
56315376
56397138
56315161
56315339
56315589
56315626
56315755
56315761
56315821
56315823
56315826
56396080
56396081
56396195
56397300
56397301
4
1
2
8
6
2
1
2
2
8
4
6
4
2
3
1
2
1
1
2
2
4
4
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Nut, Hex Nyl Loc 3/8-16
Nut, Hex Nyl Loc-Thin Ss 1/4-20
Wsh, Flt Sae Ss 1/4
Wsh, Flt Sae Ss 3/8
Wsh, Flt Sae Ss 5/16
Pin, Cotter Hair
Scr, Hex Ss 1/4-20 X 1.75
Pin, Cotter Hair .0915 X .375
Scr, Hex Loc Ss 5/16-18 X .88
Scr, Hex Loc Ss 3/8-16 X .75
Nut, Hex Nyl Loc Ss M10-1.5
Scr, Hex Loc Ss M8-1 X 25mm
Scr, Hex Ss M10-1.5 X 20mm
Pin, Ring .50 X 1.63
Rivet, Nylon Tree Push-In (.218)
Wsh, Flt .754 X 1.250 X .120
Wsh, Flt Ss .378 X 1.000 X .120
Wheel
Accessory Plate Data Plate
Hub, Drive
Asm, Motor And Gear Unit, .42hp (M2 / M3)
Carbon Brush
Brush Spring
Pin
Bracket
Scrub Deck , Disc, Cast, 32
Skirt, Rubber 32
Extruded Bumper, 32” Deck
Band Clamp, Adjustable
Deck Mount Brkt Weldt, Lhs
Deck Mount Brkt Weldt, Rhs
Bracket Weld’t
Lug, Counterclockwise (36-43)
Lug, Clockwise (36-43)
Hose, Pve .38id X 6.00
Tee,Barb
Hose, Pvc .375
36
37
38
39
40
41
42
43
56002938
56003405
56003436
56009030
56009096
56407053
56314030
56397081
3
3
3
1
1
2
1
1
Wsh, Flt SAE SS 5/16
Nut, Hex Nyl Loc SS M8-1.25
Scr, Hex Hd SS M8-1.25 x 25mm
Scr, Pan Phil Thd Form 10-24 x .38
Wsh, Flt .193 x .875 x .060
Thermoid Disk
Brush Holder
Spring Retainer
*
*
56315838
56413883
2
2
Harness, Filter Nilfisk only
Ferrite Bead Nilfisk only
BOOK E
E 18.3.1 15
* = Not Shown
FORM NO. 56042451
E
BOOK E
18.3.1 16
FORM NO. 56042451
SCRUB SYSTEM - CYLINDRICAL
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
*
18
19
20
21
22
23
24
25
26
SCRUB SYSTEM - CYLINDRICAL
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56002959
56003403
56407391
56407433
56412176
56001879
56002086
56002948
56003120
56003426
56003431
56003492
56003603
56003679
56315355
56315354
56315353
56112771
56315061
56412287
56315161
56315320
56315321
56262549
56315408
56315445
56315448
56315459
56315453
56315403
56315470
56315469
56315468
Pin, Cotter Hair NOTE #2 / TSBUS2007-957
Nut, Hex Nyl Loc M6-1.00
Blade
Sheave, Poly-V
Bushing
Wsh, Flt SAE 1/2 NOTE #2 / TSBUS2007-957
Scr, Soc Set Loc 5/16-18x.25
Scr, Hex Hd Loc 1/4-20x.75
Pin, Cotter Hair .0915 X .375
Nut, Hex Nyl Loc SS M6x1.0
Scr, Hex Hd SS M6-1.0x16mm
Scr, Hex M6-1.0x95mm
Scr, Pan Phil Thd Form 1/4-20x.38
Pin, Ring .50 X 1.63
Manifold, PVC (28”)
Manifold, PVC (26”)
Manifold, PVC (24”)
Clamp, Hose SAE #10
Motor, 24 Vdc, .5 Hp, 1800 RPM (M2 / M3)
Brush / Spring Kit
Pin
Harness, Brush
Belt, Auto Tension
Tee, Barb NOTE #1
Drive End Assy (#36-43)
Cover, Belt
Idler End Assy (#44-48)
Hopper Assembly (28” / #29-35))
Hopper Assembly (26” / #29-35)
Hopper Assembly (24” / #29-35)
Housing, Weld’t (28”)
Housing, Weld’t (26”)
Housing, Weld’t (24”)
3
2
2
2
2
6
4
6
2
8
2
2
2
2
2
2
2
2
2
1
1
2
2
1
2
2
2
1
1
1
1
1
1
Item
BOOK E
E 18.3.1 17
Ref. No. Qty
Description
36
37
38
39
40
41
42
43
44
45
46
47
48
56410214
56412459
56003426
56002896
56003431
56009060
56315460
56315454
56315401
56315464
56315462
56315319
56315467
56315466
56315465
56106070
56407389
56407442
56002119
56003237
56315405
56407557
56407558
56106070
56407558
56315447
56396254
56407551
2
2
4
2
4
2
1
1
1
1
1
1
1
1
1
2
1
1
2
1
1
1
1
1
1
1
1
1
Strap
Wheel
Nut, Hex Nyl Loc SS M6-1.00
Scr, Pan Phil SS 10-24 x .62
Scr, Hex Hd SS M6-1.00 x 16mm
Wsh, Flt SS .260 x 1.00 x .074
Hopper (28”)
Hopper (26”)
Hopper (24”)
Hopper Screen (28”)
Hopper Screen (26”)
Hopper Screen (24”)
Hopper Bracket (28”)
Hopper Bracket (26”)
Hopper Bracket (24”)
Bearing, Ball
Spacer
Sheave, Poly-V
Scr, Soc Set Loc 1/4-20 x .50
Key, Sq. .19 x .62
Bearing Plate
Spindle
Washer, Bearing
Bearing, Ball
Washer, Bearing
Idler Bearing Plate
Knob
Hub
*
56315838
2
Harness, Filter Nilfisk only
27
28
29
30
31
32
33
34
35
* = Not Shown
NOTE #1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose
(56456830) to the scrub deck has been replaced in production with a single 1/2” diameter hose (56264318). If ordering Tee 56262549 for a machine with
this previous design solution hose you will also need to order Solution Hose 56264318. See NOTE #1 on SOLUTION SYSTEM / ELECTRICAL-1.
NOTE #2: Housing Weldment Item #26 has been redesigned to accommodate a new upper deck linkage arm (see Solution System / Electrical-1 /
TSBUS2007-957). The redesigned weldment is backwards compatible to the previous design. On machines with the new design the quantity of item #1 is
reduced to 2 and the quantity of item #6 is reduced to 4.
FORM NO. 56042451
E
BOOK E
18.3.1 18
FORM NO. 56042451
SOLUTION SYSTEM / ELECTRICAL-1
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
07-2
04-11
07-2
SOLUTION SYSTEM / ELECTRICAL-1
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Item
Ref. No. Qty
Description
1
2
4
6
7
8
9
10
11
12
13
16
21
25
26
27
29
32
33
34
36
38
42
43
46
48
49
61
63
64
65
67
68
71
74
76
77
78
79
80
81
82
83
84
100
101
102
103
107
108
109
110
111
56315285
56002959
56370878
56003312
56003403
56311057
56365777
56418669
56001832
56001879
56001939
56002667
56002684
56002841
56002849
56002894
56003174
56003637
56003633
56003679
56009139
56212242
56315089
56315104
56315130
56315186
56315191
56315284
56315517
56387302
56396049
56315380
56397203
56264318
56469380
56009019
56009062
56393303
56412071
56412262
56420018
56420019
56420020
56396268
56002786
56397188
56397187
56219932
56009122
56315839
56315836
56002063
56003120
Hinge
Pin, Cotter Hair
Bearing, Sleeve only used before TSBUS2007-957
Nut, Hex Nyl Loc M12-1.75 only used before TSBUS2007-957
Nut, Hex Nyl Loc M6-1.00
Coupler, Chain
Lug, Brush Driver
Reducer, Barb
Scr, Flt Phil 1/4-20x1.00
Wsh, Flt SAE 1/2
Wsh, Flt SAE 5/16 QTY of 5 after TSBUS2007-957
Scr, Hex Hd 5/16-18x.75 QTY of 7 after TSBUS2007-957
Scr, Hex Hd 3/8-16x1.75
Nut, Hex Nyl Loc-Thin 3/8-16
Nut, Hex Nyl Loc-Thin SS 10-24
Scr, Pan Phil SS 10-24x.75
Scr Hex Thd To Hd M6-1.0x16mm
Scr, Hex M12-1.75x40mm only used before TSBUS2007-957
Scr, Pan Phil SS Type B 10-16x.50
Pin, Ring .50 X 1.63
Scr, Pan Phil Loc 10-24x.38
Chain
Tank, Solution
Nose Cone, 24-26 Commercial
Weldment, Actuator Mount
Bracket, Linkage Pivot only used before TSBUS2007-957
Yoke, Actuator
Cover, Chemical Bottle
Cap, Raw
Spiral, Hose X .500
Lift Actuator Assembly (76-84)
Bushing only used before TSBUS2007-957
Solenoid Valve Assy. (L1)
Hose, Spiral .500 NOTE #1
Clamp, P
Scr, Hex Thd Form 1/4-20 X .38
Scr, Pan Phil Thd Form 1/4-20 X .50
Actuator, Motor (M5)
Compression Spring
Housing, Spring
Compression Spring
Nut Retainer
Nut Retainer
Spring Housing Guide
Scr, Pan Phil 1/4-20 x 1.50 (onboard charger only)
Connector Assy (connected to batteries / onboard charger only)
Connector Assy (connected to machine / onboard charger only)
Clamp, Hose SAE #6
Wsh, Flt .344 x .938 x .125
Bracket Weld’t only used after TSBUS2007-957
Turnbuckle Assy only used after TSBUS2007-957
Wsh, Flt SAE 3/8 only used after TSBUS2007-957
Pin, Cotter Hair .0915 x .375 only used after TSBUS2007-957
1
1
1
1
2
2
4
1
4
2
4
6
1
1
1
1
2
1
1
1
4
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
4
1
1
1
1
1
1
1
2
1
1
3
2
1
1
3
2
BOOK E
E 18.3.1 19
NOTE #1: The previous solution hose design which consisted of a Reducer (56418669), Hose Clamps (56219932) and a smaller 3/8” diameter Hose (56456830)
to the scrub deck has been replaced in production with a single 1/2” diameter hose (56264318). If ordering this new hose (56264318) for a machine with the
previous design you will also need to order a new Tee (56397300 for disc / 56262549 for cylindrical) for the scrub deck. See NOTE #1 on SCRUB SYSTEM
– DISK (24”, 26”, 28”) and SCRUB SYSTEM – CYLINDRICAL.
FORM NO. 56042451
E
BOOK E
18.3.1 20
FORM NO. 56042451
SOLUTION SYSTEM / ELECTRICAL-2
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
06-7
04-11
07-2
Item
SOLUTION SYSTEM / ELECTRICAL-2
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
3
5
14
15
17
56364527
56407361
56001954
56001993
56002066
1
2
8
4
7
18
19
20
22
56002098
56002124
56002145
56002708
4
12
5
4
23
24
28
30
31
35
56002832
56002840
56002962
56003266
56002094
56009030
2
1
1
1
4
3
37
39
40
41
*
44
45
56009206 4
56244969 1
56264442 1
56303553 1
56303526 A/R
56315121 1
56315124 1
*
47
56315747
56315162
1
1
50
51
52
53
54
56315193
56315206
56315222
56315236
56315243
2
1
1
1
1
Knob
Clamp, Plastic
Wsh, Flt SAE #10
Scr, Pan Phil 10-24x.50
Scr, Pan Phil 1/4-20x.62
(Onboard Charger Only)
Wsh, Flt SAE 1/4
Scr, Pan Phil 10-24x.62
Scr, Pan Phil 1/4-20x.50
Nut, Hex Nyl Loc 1/4-20
(Onboard Charger Only)
Nut, Hex Nyl Loc-Thin 10-24
Nut, Hex Nyl Loc-Thin 1/4-20
Scr, Soc Shd .38 X .62 X 5/16-18
Ring, Ret Ext Type E 0.75 Dia
Scr, Hex Hd 5/16-18x1.50
Scr, Pan Phil Thd Form 10-24x.38
(Qty of 1 on Non-Onboard Charger models)
Scr, Truss Phil-Blk 10-24x.50
Clamp, Hose SAE #12
Barb, 90 Ebow 3/4 X 3/8npt
Key Switch Assembly
Set of 2 Replacement Keys
Guide, Cable
Charger, On-Board 24V NOTE #3
TSBUS2006-931
Thermistor Repair Kit for 56315124
Assy, Electrical Box (85-96) TSBUS2005-897
TSBUS2006-926
Bushing, Flange
Bracket, Charger (Onboard Charger Only)
Panel, Electrical
Weldment, Squeegee Lift
Cable Assy
Item
BOOK E
E 18.3.1 21
Ref. No. Qty
Description
66
69
70
72
75
85
86
87
88
89
90
91
92
93
94
95
96
97
56315245
56315255
56315256
56315259
56315266
56315270
56315297
56315577
56396143
56409152
56410166
56412285
56486112
56009203
56412089
56412179
56469858
56002462
56002561
56009031
56315182
56315294
56397088
56009030
56409538
56315345
1
1
1
1
1
1
1
1
1
1
2
1
2
3
1
1
3
7
4
2
1
1
1
1
4
1
98
56397187
1
99
56002825
2
104
105
106
56315382
56315532
56001993
1
1
2
Bushing, Squeegee Cable
Circuit Breaker, 5 Amp
Circuit Breaker, 30 Amp
Plate, Circuit Breaker
Assembly, Paddle TSBUS2005-898
Charger Cord, Us (Onboard Charger Only)
Control Panel Assy (A1) NOTE #1
Control Panel Assy (A1) NOTE #2
Hose, Pvc
Barb, 90 Elbow 1/2 X 1/2npt
Clamp, P
Gasket, Elect. Cover
Clamp, P (Onboard Charger Only)
Stud, 1/4-20
Fuse, 150 Amp (F1)
Contactor, 24 Vdc (K2 / Vac Motor)
Standoff, Insulated
Scr, Pan Phil 1/4-20x.38
Nut, Hex W/ Shprf 1/4-20
Scr, Pan Phil Thd Form 8-32x.50
Panel, Electrical
Speed Control (A2)
Contactor, 24v Spdt (K1 / Brush Motor)
Scr, Pan Phil Thd Form 10-24x.38
Insulator, Terminal
Connector Assy (connected to batteries)
(non onboard charger only)
Connector Assy (connected to machine)
(non onboard charger only)
Scr, Pan Phil 1/4-20 x 1.25
(non onboard charger only)
Clip, Conduit
Gasket
Scr, Pan Phil 10-24 x .50
55
56
57
58
59
60
62
* = Not Shown
NOTE #1: Order this control panel assy if you have the “Old Pump” voltage reading across the solution pump (M7) leads.
NOTE #2: Order this control panel assy if you have the “New Pump” voltage reading across the solution pump (M7) leads.
Voltage
Regular Scrub
Old Pump
New Pump
7
9.56
Heavy Scrub
Old Pump
New Pump
11.3
13.7
Extreme Scrub
Old Pump
New Pump
17
19.24
NOTE #3: Starting with Charger serial # CP240548022382 the charger software can be programmed with a computer and the QuiQ Programmer kit 56315732.
The On-Board Charger is only available as a field kit (56315846) on Nilfisk models.
FORM NO. 56042451
E
BOOK E
18.3.1 22
FORM NO. 56042451
CHEMICAL ASSEMBLY (AXP MODELS ONLY)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
05-12
04-11
07-2
CHEMICAL ASSEMBLY (AXP MODELS ONLY)
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Item
Ref. No. Qty
Description
1
2
3
4
5
6
7
8
9
10
11
12
13
14
**
**
15
19
20
21
22
23
56315501 1
56003699 1
56315241 1
56315340 1
56315476 1
56315515 1
56315522 1
56315524 3
56002877 2
56002701 2
56002035 2
56315265 1
56219932 2
56412187 1
56315502 1
56315535 A/R
56315537 A/R
56315511 1
56315517 1
56315527 1
56315523 1
56315382 2
56003018 2
Chemical Tank Assy (1-8 & 22-23) NOTE #1
Bushing, 1/4 ID Snub
Pump, Chemical
Circuit Board Assy
Bracket, Chemical Pump
Bracket, Tank Mounting
Check Valve, 1/8 Barb, 125PSI
Hose, Chemical Resistant, 7”
Nut, Hex Nyl Loc SS 8-32
Nut, Hex Nyl Loc 5/16-18
Scr, Hex Hd 5/16-18 x .62
Tee, Barb
Clamp, Hose SAE #6
Hose, .38 Spiral
Chemical Bottle As
AXP Neutral Cleaner, 4 pack
AXP Heavy Duty Cleaner & Degreaser, 4 pack
Indicator Assy
Cap
Insert, Dry Break
Cap, Dry Break, 1/8 Barb, 90°
Clip, Conduit
Scr, Pan Phil SS 8-32 x .38
BOOK E
E 18.3.1 23
** = Optional, Not Included
NOTE #1: The Chemical Assembly is only available as a field kit on Nilfisk models.
FORM NO. 56042451
E
BOOK E
18.3.1 24
FORM NO. 56042451
PADDLE ASSEMBLY
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
05-5
04-11
06-8
Item
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
PADDLE ASSEMBLY
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56315266
56396197
56397029
56315231
56325654
56002006
56003197
56003354
56003527
56003545
56009030
56009096
56009287
56315229
56315230
56315251
56315280
56397015
56397109
56397170
56397171
56397172
56478246
56481890
Assembly, Paddle TSBUS2005-898 / TSBUS2006-925
Potentiometer, 100k (R2)
Potentiometer, 5k (R1)
Harness, Handle
Spring, Compression
Wsh, Flt SAE #6
Scr, Pan Phil Plastite 6-18x.62
Scr, Pan Phil M4 X 12
Scr, Pan Phil Plastite 1/4-10x2.00
Scr, Pan Phil Plastite 8-10x.75
Scr, Pan Phil Thd Form 10-24x.38
Wsh, Flt .193 X .875 X .060
Scr, Pan Phil Type B 8x2.00
Paddle, Back Cover
Paddle, Front Cover
Weldment, Handle Bar
Knob
Cam Controller
Sleeve
Washer, Plastic
Clamp
Potentiometer Fork
Tie, Cable
Clamp, P
1
1
1
1
2
2
6
1
1
4
2
1
1
1
1
1
1
1
1
3
2
1
1
2
BOOK E
E 18.3.1 25
FORM NO. 56042451
E
BOOK E
18.3.1 26
FORM NO. 56042451
SQUEEGEE ASSEMBLY
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
04-11
04-11
07-2
Item
SQUEEGEE ASSEMBLY
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
15
56315291
56315290
56315632
56324350
56370711
56002851
56002907
56002909
56002938
56003472
56003736
56009111
56315347
56315348
56314028
56314322
56314696
56314026
56314323
56314691
56314027
56314324
56314692
56314271
56314325
56314694
56471194
1
1
1
2
2
2
2
2
2
2
2
6
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
Squeegee Assembly (24”)
Squeegee Assembly (26” & 28”)
Squeegee Assembly “D” (32”)
Wheel
Nut, Thumb
Nut, Hex Nyl Loc-Thin SS 5/16-18
Nut, Hex Nyl Loc SS 6-32
Scr, Pan Phil SS 6-32x.38
Wsh, Flt SAE SS 5/16
Scr, Soc Shd .38 X 1.00 X 5/16-18
Scr, Hex Thd to Hd SS 5/16-18 x 3.00
Nut, Wing SS 1/4-20
Squeegee Blade kit (24”) NOTE #1
Squeegee Blade kit (26” & 28”) NOTE #1
Strap, Front (24”)
Strap, Front (26” & 28”)
Strap, Front “D” (32”)
Strap, Left Rear (24”)
Strap, Left Rear (26” & 28”)
Strap, Left Rear “D” (32”)
Strap, Right Rear (24”)
Strap, Right Rear (26” & 28”)
Strap, Right Rear “D” (32”)
Squeegee Tool, Cast (24”)
Squeegee Tool, Cast (26” & 28”)
Squeegee Tool, Cast “D” (32”)
Latch Assembly
**
**
**
**
56315347
56315351
56314305
56315854
1
1
1
1
24” Squeegee Blade Kits
Kit, Gum Rubber Squeegee Blade NOTE #1
Kit, Linatex Squeegee Blade NOTE #1
Kit, Neoprene Squeegee Blade NOTE #1
Kit, Squeegee Blade PU B NOTE #1
**
**
**
**
56315348
56315352
56314062
56315855
1
1
1
1
26” & 28” Squeegee Blade Kits
Kit, Gum Rubber Squeegee Blade NOTE #1
Kit, Linatex Squeegee Blade NOTE #1
Kit, Neoprene Squeegee Blade NOTE #1
Kit, Squeegee Blade PU C NOTE #1
**
**
**
**
56315674
56314865
56314843
56315856
1
1
1
1
32” Squeegee Blade Kits
Kit, Gum Rubber Squeegee Blade NOTE #1
Kit, Linatex Squeegee Blade NOTE #1
Kit, Neoprene Squeegee Blade NOTE #1
Kit, Squeegee Blade PU D NOTE #1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
BOOK E
E 18.3.1 27
** = Optional, Not Included
NOTE #1: All squeegee blade kits include both front and rear squeegee blades.
FORM NO. 56042451
04-11
WIRING DIAGRAM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
05-4
(OPTIONAL)
ONBOARD BATTERY
NOTE: CONNECT GRN WIRE TO F2 AND DISCONNECT
CHARGER
RED WIRE FROM F2 FOR CHARGER OPTION
GRN
INTERLOCK
F2
RED
B+
1
2
BLK/WHT
CIRCUIT BREAKER, 5 AMP
B-
(OPTIONAL)
CHEMICAL RATIO SENSOR
SUPPLY
OUTPUT
+
RED
-
RED/BLK
BLK
B+
J2-2
J2-3
B-
INPUT
J2-6
BLK
J2-1
VIO/YEL
J2-8
WHT/GRN
BRUSH REMOVE
BRUSH REMOVE
RECYCLE PUMP
SOL. PUMP
B-1
RELAY N.O.
RELAY COMMON
J2-12
J1-8
J1-7
BLK
YEL/VIO
S4
1
BLK
BLK
BRN
1
2
1
BLK
SWITCH, FLOAT
(OPTIONAL)
R2
R1
POT. 5K OHM THROTTLE
POLARITY FOR DISC BRUSHES
M2
WHT
RED
WHT
M2
+
M
BLK
M
-
WHT/GRA
BLK
BLK
(OPTIONAL)
M3
WHT/GRA
BLK
WHT
-
M
+
BLK
M9
+ M
M
+
YEL/VIO
CHEMICAL PUMP
M3
-
-
MOTOR, RIGHT BRUSH
MOTOR, LEFT BRUSH
WHT
BLK
MOTOR, LEFT BRUSH
POLARITY FOR CYLINDRICAL BRUSHES
-
+
ORN
BLU/WHT
BLU/WHT
K1
NOTE: SWITCH IS PART OF
PUMP ASSEMBLY
BLK
MOTOR, RIGHT BRUSH
WHT/RED
S1
(OPTIONAL)
WHT/RED
-
(OPTIONAL)
S2
MOTOR, LEFT SIDE BROOM
1
M11
WHT/RED
-
M
+
BLK
MOTOR, RIGHT SIDE BROOM
RED
K2
2
+ M
36V ONLY
M10
+ M
M7
1
RED
M4
MOTOR, VAC
2
-
GRN/BLK
SOLUTION PUMP
M8
+ M
ORN/RED
RECYCLE PUMP
NOTE: SWITCH IS PART OF
PUMP ASSEMBLY
BLU
BLK
BLK
M
FORM NO. 56042451
BLK
S6
BLU/WHT
BLK
GRN/BLK
1
2
WHT
2
3
BLU
S5
SWITCH, FLOAT
WHT
WHT
BLU
BLK
BRN
POT. 100K OHM SPEED LIMIT
WHT
BLK
ORN/RED
2
BLK
M2
ORN/BLU
RED/BLK
BLU/BLK
1
YEL/RED
PIN 14 - BRAKE (+)
PIN 9 - STATUS
PIN 6 - BRAKE (-)
PIN 16 - REV
PIN 5 - KSI
PIN 13 - POT.LO
PIN 4 - POT.WIPER
PIN 3 - POT.HI
PIN 18 - SPEED LIMIT POT
MOTOR, WHEEL DRIVE
WHT
M
MOTOR, BRUSH ACTUATOR
2
3
M1
M1
+
B-
BLK
SWITCH, FLOAT
BRN/BLK
M
BRUSH ACTUATOR 1
BRN
CIRCUIT BREAKER, 30 AMP
A2
1210 SPEED CONTROLLER
(1228 FOR 36V)
J2-4 RECOVERY TANK FULL SENSE
YEL/GRN
BRUSH ACTUATOR 2
J2-11 CHEMICAL PUMP
2
COIL, RECYCLE SOLUTION SOLENOID
(OPTIONAL)
2
GRA/WHT
L2
1
BRN
RECYCLE STOP SWITCH
RED/GRN
COIL, SOLUTION SOLENOID
YEL/BLU
WHT/YEL
J1-1 RECYCLE START SWITCH
2
REVERSE
VACUUM MOTOR SENSE
J1-4
ORN/BLU
STATUS
J1-5
RED/BLK
FOR/REV.
WHT/GRA J2-5
BRUSH MOTOR SENSE
J2-10
ORN
L1
1
BRN
BLK
J2-9
M5
RECYCLE SOLUTION
COIL, VAC MOTOR CONTACTOR
-
B-4
J1-9
SOLUTION
BLK/YEL
BRN
B-3
VACUUM CONTACTOR
K2
(OPTIONAL)
EM BRAKE
36V ONLY
B-2
BRUSH CONTACTOR
YEL/BLU
COIL, BRUSH MOTOR CONTACTOR
J1-2
SW, SPST KEY
J1-14
J1-12
J1-11
J1-10
VIO/BLK
WHT/BLK
BRN
J1-6
BRN
K1
S3
SUPPLY
J2-7 B+2
J1-13 B+1
BRN
BLU/BLK
1
2
BRN
RED
CIRCUIT BREAKER, 5 AMP
-
J1-3
A1
RED 1
BLK
BLK
CONTROL BOARD
F3
B-
BATTERY
24 VDC OR 36 VDC
F2
+
BRN/BLK
BT1
F1
1
2
FUSE, 150 A.
RED
RED/WHT
RED
YEL/VIO
E
BOOK E
18.3.1 28
04-11
07-2
WIRING DIAGRAM
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
BOOK E
E 18.3.1 29
Item
Ref. No. Qty
Description
A1
56315297 1
56315577 1
56315294 1
NA
4
56412089 1
56315255 1
56315256 1
56397088 1
56412179 1
56397203 1
56397203 1
56315062 1
56315377 1
56315378 4
56315379 2
56315056 1
56315376 4
56397138 4
56315061 1
56412287 1
56315056 1
56315376 4
56397138 4
56315061 1
56412287 1
56412218 1
56397098 1
56393303 1
56315241 1
56315108 1
56315132 1
56397029 1
56396197 1
NA
1
NA
1
56303553 1
56303526 A/R
56315096 1
56315096 1
56315096 1
Control Panel Assy (A1) NOTE #1
Control Panel Assy (A1) NOTE #2
Speed Control
Voltage
Battery
Regular Scrub
Fuse, 150 Amp
Old Pump
7
Circuit Breaker, 5 Amp
New Pump
9.56
Circuit Breaker, 30 Amp
Heavy Scrub
Contactor, Brush Motor
Old Pump
11.3
Contactor, Vac Motor
New Pump
13.7
Solenoid, Solution
Solenoid, Recycle Solution (Optional)
Extreme Scrub
Transaxle, 24v
Old Pump
17
Motor
New Pump
19.24
Carbon Brush
NOTE #3: Starting with Charger serial # CP240548022382 the charger software can be
Neoprene Mounting Sleeve
programmed with a computer and the QuiQ Programmer kit 56315732. The On-Board
Motor, Left Brush (Disk)
Charger is only available as a field kit (56315846) on Nilfisk models
Carbon Brush
Brush Spring
Motor, Left Brush (Cylindrical)
Brush / Spring Kit
Motor, Right Brush (Disk)
Carbon Brush
Brush Spring
Motor, Left Brush (Cylindrical)
Brush / Spring Kit
Motor, Vac
Carbon Brush Set of 2
Motor, Brush Actuator
Pump, Chemical (Optional)
Pump, Solution
Pump, Recycle (Optional)
Potentiometer, 5K Ohm, Throttle
Potentiometer, 100K Ohm, Speed Limit
Part of M7
Part of M8
Switch, Key
Set of 2 Replacement Keys
Switch, Float
Switch, Float (Optional / Recycle Start)
Switch, Float (Optional / Recycle Stop)
*
56315124
1
*
*
*
*
*
*
*
*
*
*
*
56315747
56315340
56315249
56315751
56416445
56372673
56478523
56478246
56314119
56315838
56413883
1
1
1
1
3
8
2
9
1
2
2
Charger, Onboard 24V (Onboard Charger Models Only) NOTE #3
TSBUS2006-931
Thermistor Repair Kit for 56315124
Chemical Ratio Sensor (Chemical Models Only)
Harness, Main TSBUS2006-926 / TSBUS2007-955
Vacuum Harness TSBUS2007-955
Cable Assy 4 AWG (Battery Cables)
Boot, Battery Post
Tie, Cable
Tie, Cable
Spacer. Battery
Harness, Filter Nilfisk only
Ferrite Bead Nilfisk Disk models only
A2
BT1
F1
F2
F3
K1
K2
L1
L2
M1
*
*
*
M2
*
*
*
M3
*
*
*
M4
*
M5
M6
M7
M8
R1
R2
S1
S2
S3
*
S4
S5
S6
NOTE #1: Order this control panel assy if you have the “Old Pump” voltage reading
across the solution pump (M7) leads.
NOTE #2: Order this control panel assy if you have the “New Pump” voltage reading
across the solution pump (M7) leads.
* = Not Shown
FORM NO. 56042451
E
**
*
**
*
**
*
**
*
**
BOOK E
18.3.1 30
OPTIONAL KITS AND ACCESSORIES
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
Ref. No. Qty
Description
56315168
56040824
56315312
56040825
56315845
56040928
56315846
56040929
56315732
Optional Kits
Extended Scrub Kit
Instruction Sheet
Squeegee Wand Kit
Instruction Sheet
EDS On-Board Chemical Kit (Nilfisk)
Instruction Sheet
On-Board Charger kit-EU (Nilfisk)
Instruction Sheet
QuiQ Programmer Kit NOTE #2
1
1
1
1
1
1
1
1
1
04-11
07-2
Replacement parts for the kits listed above can be found on each kit’s associated instruction sheet.
**
**
**
**
**
**
**
56315322
56315323
56315324
56315864
56315325
56315326
56315327
A/R
A/R
A/R
A/R
A/R
A/R
A/R
Advance Deck Kits
Kit, 24” Disk Deck Assy (Advance) NOTE #3
Kit, 26” Disk Deck Assy (Advance) NOTE #3
Kit, 28” Disk Deck Assy (Advance) NOTE #3
Kit, 32” Disk Deck Assy (Advance) NOTE #3
Kit, 24” Cyl Deck Assy (Advance) NOTE #3
Kit, 26” Cyl Deck Assy (Advance) NOTE #3
Kit, 28” Cyl Deck Assy (Advance) NOTE #3
**
**
**
**
56315860
56315861
56315863
56315862
A/R
A/R
A/R
A/R
Nilfisk Deck Kits
Kit, BA625 Disk Deck W/Squeegee (Nilfisk) NOTE #4
Kit, BA725 Disk Deck W/Squeegee (Nilfisk) NOTE #4
Kit, BA825 Disk Deck W/Squeegee (Nilfisk) NOTE #4
Kit, BA725 Cyl Deck W/Squeegee (Nilfisk) NOTE #4
**
**
**
56315347
56315351
56314305
1
1
1
24” Squeegee Blade Kits
Kit, Gum Rubber Squeegee Blade NOTE #1
Kit, Linatex Squeegee Blade NOTE #1
Kit, Neoprene Squeegee Blade NOTE #1
**
**
**
56315348
56315352
56314062
1
1
1
26” & 28” Squeegee Blade Kits
Kit, Gum Rubber Squeegee Blade NOTE #1
Kit, Linatex Squeegee Blade NOTE #1
Kit, Neoprene Squeegee Blade NOTE #1
**
**
**
**
56315316 A/R
56397453 6
56409441 A/R
56409823 A/R
Accessories
Tote Bag
Indicator, Battery Level (1 per battery)
Programmer, 1307 User
Programmer Cable
**
**
**
56206987
56206117
56206079
Optional Batteries
Battery, 6V 180AH Gel
Battery, 6V 195AH Wet
Battery, 6V 235AH Wet
**
56388109 A/R
4
4
4
Optional Battery Chargers
Charger, 24V 25A 110V
* = Not Shown
** = Optional, Not Included
NOTE #1: All squeegee blade kits include both front and rear squeegee blades.
NOTE #2: Starting with Charger serial # CP240548022382 the charger software can be programmed with a computer and the QuiQ Programmer kit 56315732.
NOTE #3: Refer to Instruction Sheet 56040847 for these kits.
NOTE #4: Refer to Instruction Sheet 56040932 for these kits.
FORM NO. 56042451
04-11
07-2
BRUSH SELECTOR GUIDE-DISK
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
BOOK E
E 18.3.1 31
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are
descriptions of the materials and their applications.
Union Mix:
ProLite:
Prolene:
Magna Grit:
Dyna Grit:
MidLite Grit:
MidGrit:
AgLite Grit:
Short Trim
Pad Holder:
Medium grade natural fibers for polishing finished floors with standard-speed equipment. Recommended for use in place of
white pads.
Bristles are made from light-duty polypropylene for general scrubbing when you do not want to scratch or remove finish from
the floor. Recommended for use in place of red pads.
Polypropylene material for medium-duty scrubbing on concrete, terrazzo and vinyl floor tile. Recommended for use in place of
green or blue pads.
For extreme heavy-duty scrubbing or stripping of floors. This brush has extra large diameter silicon carbide grit impregnated
synthetic bristles. Recommended for use in place of black pads.
For aggresive, heavy-duty scrubbing or stripping of floors. Recommended for use in place of brown pads.
For general purpose scrubbing of sealed or unsealed concrete, stone, terrazzo, quarry tile and other resilient hard floor surfaces.
Recommended for use in place of green or blue pads.
For general purpose scrubbing when you need a lighter action for sealed or unsealed concrete, stone, terrazzo, quarry tile and
other resilient hard floor surfaces. Recommended for use in place of green or blue pads.
For light scrubbing when used wet; buffing or polishing when used dry on urethane coated, sealed concrete or other resilient
hard surface floors. Recommended for use in place of red or white pads.
Made with a structural foam block and center ring for correct pad centering. It has a “shower feed” design for getting solution
to the floor.
24” BRUSHES
56505750 - Short Trim Pad Holder
56505195 - Pad Retainer for 56505750
56505751 - MagnaGrit
56505752 - DynaGrit
56505753 - AgLite
56505754 - Prolene
56505755 - ProLite
56505756 - Union Mix
56505757 - MidGrit
56505758 - MidLite Grit
26” BRUSHES
56505760 - Short Trim Pad Holder
56505195 - Pad Retainer for 56505760
56505761 - MagnaGrit
56505762 - DynaGrit
56505763 - AgLite
56505764 - Prolene
56505765 - ProLite
56505766 - Union Mix
56505767 - MidGrit
56505768 - MidLite Grit
28” BRUSHES
56505800 - Short Trim Pad Holder
56505195 - Pad Retainer for 56505800
56505801 - MagnaGrit
56505802 - DynaGrit
56505803 - AgLite
56505804 - Prolene
56505805 - ProLite
56505806 - Union Mix
56505807 - MidGrit
56505808 - MidLite Grit
32” BRUSHES
56505830 - Short Trim Pad Holder
56505195 - Pad Retainer for 56505800
56505831 - MagnaGrit
56505832 - DynaGrit
56505833 - AgLite
56505834 - Prolene
56505835 - ProLite
56505836 - Union Mix
56505837 - MidGrit
56505838 - MidLite Grit
DISC BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
Application
Stripping:
Concrete
Terrazzo
Ceramic/Quarry tile
Vinyl tile
General Scrubbing:
Concrete
Terrazzo
Ceramic/Quarry tile
Marble
Vinyl tile
Raised-rubber tile
Polishing:
Raised Disc Tile
Marble
Vinyl tile
46
Grit
80
Grit
X
X
X
X
X
X
X
X
180
Grit
240
Grit
X
X
X
X
X
X
X
500
Grit
X
X
X
X
X
Prolene
Prolite
Union
Mix
X
X
X
X
X
X
X
X
X
FORM NO. 56042451
E
BOOK E
18.3.1 32
04-11
BRUSH SELECTOR GUIDE-CYLINDRICAL
Convertamatic™ 24, 26, 28, 32 / BA 625, 725, 825
We provide brushes and pad holders that will give you the best possible performance between machine and floor. Following are
descriptions of the materials and their applications.
46 Grit Brush:
Most aggressive grit brush. Used primarily to clean heavy buildup on concrete floors in factories, or for
heavy stripping of finish.
80 Grit Brush:
Medium aggressive grit brush. Good all-around brush for medium to heavy buildup removal. Can also be
used for general stripping operations.
180 Grit Brush:
Least aggressive grit brush. Used for daily cleaning of hard-finished floors.
Polypropylene Brush:
Standard equipment brush. Low cost, yet effective in cleaning many common floor surfaces.
Stiff Nylon Brush:
Cleaning action similar to polypropylene. More durable and wear-resistant than polypropylene.
Soft Nylon Brush:
Least aggressive brush available. Used on soft-finish floors where a more aggressive brush would leave
scratch marks, or in applications requiring very light cleaning.
24” BRUSHES
56314389 - Soft Nylon
56314390 - Hard Nylon
56314391 - Prolene
56314392 - 180 Grit
56314393 - 80 Grit
56314394 - 46 Grit
26” BRUSHES
56314383 - Soft Nylon
56314384 - Hard Nylon
56314385 - Prolene
56314386 - 180 Grit
56314387 - 80 Grit
56314388 - 46 Grit
28” BRUSHES
56412191 - Soft Nylon
56412192 - Hard Nylon
56412046 - Prolene
56412193 - 180 Grit
56412194 - 80 Grit
56412194 - 46 Grit
CYLINDRICAL BRUSH APPLICATION GUIDE (SUGGESTION ONLY)
Application
Stripping:
Concrete
Terrazzo
Ceramic/Quarry tile
Vinyl tile
General Scrubbing:
Concrete
Terrazzo
Ceramic/Quarry tile
Marble
Vinyl tile
Raised-rubber tile
FORM NO. 56042451
46
Grit
80
Grit
X
X
X
X
X
X
X
X
180
Grit
Polypropylene
Stiff
Nylon
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Soft
Nylon
X
X
X
X
X
www.nilfisk-advance.com
© 2007