- Case Construction
Transcription
- Case Construction
EX SERIES BACKHOE LOADER 770EX I 770EX MAGNUM 851EX EXPLORE THE NEW EX SERIES www.casece.com EXPERTS FOR THE REAL WORLD SINCE 1842 AT THE HEART OF THE NEW EX SERIES THE RIGHT TOOL FOR EVERY JOB APPLICATION • • • • EXTRAORDINARY FUEL EFFICIENCY THE EXPERT PRODUCTIVE PARTNER EXCEPTIONAL ALL ROUND VISIBILITY AND COMFORT EVERY NEED MET WITH THE RIGHT MODEL S8000: a world of applications. Since its launch the S8000 engine family has met with unequalled success. It has built a strong reputation for performance, economy and reliability with more than 3.000.000 units at work throughout the world in a wide variety of applications: CONSTRUCTION AND MATERIAL HANDLING EQUIPMENT AGRICULTURAL EQUIPMENT COMMERCIAL VEHICLES GENERATORS IRRIGATION PUMPS MARINE APPLICATIONS A LEGACY OF HIGH PERFORMANCE Case knows that power and performance are critical to the success of a machine. The new generation S8000 engine, developed by Fiat Powertrain Technologies Industrial (FPT Industrial), is a 3.9-liter 4 cylinders engine, turbo charged after cooled with a mechanical injection system. The S8000 provides outstanding performances such as faster response time. It is TIER III certified thanks to its EGR technology. The very first generation of the S8000 engine family was born in 1967. Launched as Series 800, it already showed exceptional versatility that made it an extraordinary success. Since the first models entered production over 45 years ago, the S8000 engine family has undergone a continuous evolution, introducing a multiplicity of innovations to constantly increase power, performance and efficiency. 2 FPT INDUSTRIAL: TECHNOLOGICAL PARTNER Fiat Powertrain Industrial - known around the world as FPT Industrial - is one of the world’s leading players in the development and production of engines, axles and transmissions for on-road, off-road, marine and power generation applications. The S8000 engine for Case loader backhoes is manufactured on a dedicated state of- the-art fabrication and assembly line, where advanced testing equipment puts every engine though rigorous quality checks at every key stage of production. SERVICEABILITY The 570T has been designed to capitalize on serviceability. Tiltable hood allows operators a fast and easy access to service points during daily maintenance. EXTRAORDINARY FUEL EFFICIENCY The S8000 engine is equipped with a Charge Air Cooler to improve and optimize air induction. This solution provides outstanding fuel consumption during both production and travel, and especially on backhoe digging applications. 3 THE EXPERT PRODUCTIVE PARTNER BACKHOE T he shape of the backhoe enhances the loading ability of the machine and its capacity to overcome obstacles, while ensuring a high breakout force. T he new standard lifting hook will allow to handle suspended objects easily and safely. The boom and dipper are built to guarantee durability and ultrasound inspection ensures the highest welding quality and reliability. Large box-section structures with thick, multi-plate fabrications, castings, and forgings are used in high-stress areas such as the boom nose, boom foot, boom cylinder, and stick foot to improve durability. 4 The robotically welded two-piece structural frame design provides a rugged and reliable foundation for the machine that improves stability, performance, and serviceability. LOADER CASE engineers used an innovative systems integration approach to design and improve loader arm design to meet customer needs in loading applications. The straight loader arm design with optimized line routings provides excellent visibility, enabling operators to work with maximum comfort. AXLES The axles are designed to handle extreme applications resulting in reliable performance and extended life. The new 2-cylinder steering front axle is mounted above the center pivot and can oscillate to ±13 degrees, so that all four wheels stay on the ground ensuring great stability even on the roughest terrains. TRANSMISSION The power shuttle transmission provides four speeds forward and reverse. Hydraulically shifted clutches allow on-the-go direction and travel speed shifts. Control valves deliver smooth speed and directional shifts. 4WD option improves mobility and loader performance where job site conditions are muddy and extra traction is mandatory. AXLES The axles are designed to handle extreme applications resulting in reliable performance and extended life. The 2 cylinders steering front axle is “Above Center Pivot” mounted and can oscillate to ±11 degrees helping to ensure all four wheels stay on the ground providing stability even in the roughest terrain. 5 EXCEPTIONAL ALL ROUND VISIBILITY AND COMFORT A COMFORTABLE OPERATOR IS A CONFIDENT AND PRODUCTIVE ONE The EX Series features, the largest cab in the industry, offering a comfortable working space for both the operator and a possible helper. All EX Series backhoe loaders share the same spacious and ergonomic cab design. Enter the cab to see and feel how the EX Series cab sets a new benchmark in operator comfort. Visibility is excellent to the rear and to the bucket edge. The large size glazed windows and narrow cab columns put you in command with clear, all-round visibility. The very good view to the attachment and corners improves comfort and jobsite safety, for greater productivity. This spacious cab has redesigned ergonomics to offer better operator comfort. All the controls have been specially positioned to offer easy access and faster control. The large window improves air ventilation in the cab and facilitates communication to the back of the machine. The cabin has a large buddy seat along with storage compartments, mobile charger, document holder, bottle holder and radio. THE SEAT The mechanical suspended seat increases operator comfort with a cushioned upper high back. It is fully adjustable to provide the optimal driving position. BUDDY SEAT The full size, fully cushioned helper seat provides a secure and comfortable ride. 6 VISIBILITY The 6 post cab with plenty of floor to ceiling windows provides excellent visibility to improve both operator performance and jobsite safety. CONTROLS The ergonomic layout of operator controls enhances operator comfort and productivity. Easy access to the cab with ergonomically placed grab rails, walk-up steps and large platform. 7 EX SERIES BACKHOE LOADER 770EX 770EX MAGNUM 851EX 76 hp 332 Nm 8040.45 TCA 104 x 115 mm 3.9 l 18.3:1 86 hp 402 Nm 96 hp 420 Nm ENGINE Engine model code Type Bore x stroke Displacement Compression ratio Horsepower - rated at 2200 RPM Maximum torque at 1300 RPM ENGINE SPEEDS Rated speed, full load Low idle speed (at no load) POWER TRAIN TRANSMISSION - STANDARD Model Type GEAR 1st 2nd 3rd 4th TRANSMISSION - OPTIONAL Model Type GEAR 1st 2nd 3rd 4th FRONT AXLE 2 WHEEL DRIVE - STANDARD Model Type 4 WHEEL DRIVE - OPTIONAL Model Type REAR AXLE Make & Model Type BRAKES SERVICE BRAKES Type No. of discs PARKING BRAKES Type 8 2200 950 CARRARO 2WD TLB1 Power Shuttle with 4 forward and 4 reverse travel gears Forward (speed kmph) Reverse (speed kmph) 6.2 7.4 10 12 20.7 Not Recom. 39.2 Not Recom. CARRARO 4WD TLB1 Power Shuttle with 4 forward and 4 reverse travel speeds Forward (speed kmph) Reverse (speed kmph) 6.2 7.4 10 12 20.7 Not Recom. 39.2 Not Recom. CNH PS1300 Steering Carraro 26.17 Steering CARRARO 28.32M Rigid Wet multi-discs 6 Manual, with lever SPECIFICATIONS 770EX TYRE SIZE RECOMMENDED Standard - Front Standard - Rear Heavyduty - Front Heavyduty - rear HYDRAULIC SYSTEM Type Flow rate Pressure STEERING Type System pressure Displacement TURNING RADIUS (Outside of the Bucket) With Brake Without Brake TREAD WIDTH Front Rear 770EX MAGNUM 851EX 9.0x16 - 16 PR 16.9x28 - 12 PR 12.5x18 - 12 PR 14x25 - 20 PR 123 lpm @2200 RPM 190 Bar Gear pump 123 lpm @2200 RPM 210 Bar 151 lpm @2200 RPM 210 Bar Power Steering 140 Bar 125 cc 4600 mm 5550 mm 1884 mm 1697 mm BUCKETS SERVICE CAPACITIES Loader buckets Type_______________________________________________Standard Heaped capacity (SAE capacity)___________________________1.0 Cum. Width_____________________________________________ 2277 mm Weight______________________________________________ 400 kg Backhoe buckets Heaped capacity (SAE capacity)__________________________0.26 Cum. Width______________________________________________ 762 mm Weight______________________________________________ 240 kg Engine Oil_____________________________________________ 11 Ltr Transmission Oil________________________________________ 16 Ltr Rear Axle Oil___________________________________________ 18 Ltr Hydraulic Oil__________________________________________ 129 Ltr Fuel Tank_____________________________________________ 142 Ltr Coolant_______________________________________________ 20 Ltr OPTIONAL BUCKETS Capacity (SAE l) Loader HD______________________________________________ 630 Loader HD______________________________________________ 760 Loader GP______________________________________________ 900 Loader GP_____________________________________________ 1000 Loader coal handling_____________________________________ 1200 Loader Garbage handling (without teeth)_______________________ 1500 Bull Clam_____________________________________________ 1000 Backhoe Trenching_________________________________________ 80 Backhoe Trenching________________________________________ 120 Backhoe Trenching________________________________________ 180 Backhoe Trenching________________________________________ 260 Backhoe Trapezoidal______________________________________ 300 Ditch Cleaning (without teeth)________________________________ 300 9 EX-SERIES BACKHOE LOADERS GENERAL DIMENSIONS STANDARD DIPPER S P G Y C Z B N E O A F 2866 X D M W 2271 L LOADER A Dump height B Load over height C Hinge pin height D Reach at ground E Reach at full height-bucket dumped F Below ground level-dig depth G Dump angle Loader bucket breakout force Bucket capacity Pay load Maximum lifting capacity @ max height BACKHOE L Max.dig depth M Reach ground level to swing center N Max working height O Max load over height P Bucket rotation Bucket breakout force Dipper digging force Loading reach Safe working load @ 3.2 mtr radius BOTTOM DUMP BUCKET This multipurpose bucket is ideal for digging, loading, dozing, backfilling, grading and grab operation. Bucket width Outside mm 2265 Width of dozer blade mm 2300 Maximum Clamp Opening mm 977 Bucket capacity (SAE HEAPED) Cu.m 1.0 Dump height mm 2710 10 770EX mm mm mm mm mm mm ° kgf Cum. kg kg mm mm mm mm ° kgf kgf mm kg 1760 3425 770EX MAGNUM 2732 3275 3580 1486 760 106 45 6570 1.0/1.1/1.2 1925 3700 5000 3725 2375 1000 4547 5753 5593 3774 204 5630 4300 2375 1100 5720 OVERALL DIMENSIONS AND WEIGHTS Overall operating weight W Wheel base X Minimum ground clearence Y Overall height (Transport) Z Width over bucket (Transport) 851EX 6570 2041 3700 5630 4300 2375 1100 kgs mm mm mm mm 8230 2230 399 3840 2300 SPECIFICATIONS GENERAL DIMENSIONS EXTENDHOE DIPPER (OPTIONAL) P N G Y C Z B E O 2866 A F X D M W 2271 L LOADER A Dump height B Load over height C Hinge pin height D Reach at ground E Reach at full height-bucket dumped F Below ground level-dig depth G Dump angle Loader bucket breakout force Bucket capacity Pay load Maximum lifting capacity @ max height BACKHOE L Max.dig depth M Reach ground level to swing center N Max working height O Max load over height P Bucket rotation Bucket breakout force Dipper digging force Loading reach Safe working load @ 3.2 mtr radius 770EX mm mm mm mm mm mm ° kgf Cum. kg kg mm mm mm mm ° kgf kgf mm kg 1760 3425 770EX MAGNUM 2732 3275 3580 1486 760 106 45 6570 1.0/1.1/1.2 1925 3700 5000 3725 2375 1000 5583 6695 6195 4376 204 5630 4300 2375 1100 5720 851EX 6570 2041 3700 5630 4300 2375 1100 STANDARD EQUIPMENT INSTRUMENTATION: Speedometer RPM meter digital hour counter fuel level indicator Engine coolant temperature gauge Switches for operating the working lamps, cabin fan, declutch,& hazard lamps ELECTRICAL & LIGHTS 2 Head lights in front with Parking lights & direction indications Cabin lamps Fan 2 rear working lamps for backhoe operation Spacious battery box on RH side for easy access and maintenance New carling electrical switches 4 Working light made standard in all TB80 machines OPTIONAL EQUIPMENT 4-Wheel Drive (4x4 Traction) Rockbreaker Lifting arrangement Extending type dipper HVAC cabin (only 770EX Magnum) 1.1 Cum and 1.2 Cum loader bucket with teeth Bottom dump bucket Ripper Tooth Backfill blade Heavy duty tyres -14X25 - 20 PR Dozer blade Lime Stone scraper Wood log grapple 11 www.casece.com Form No. IN5201CC - MediaCross Firenze - 11/15 EXPERTS FOR THE REAL WORLD SINCE 1842 PARTS AND SERVICE Wide network of customer support across the world. No matter where you work, we’re here to support and protect your investment and exceed your expectations. You can count on Case and your Case dealer for full-service solutions-productive equipment, expert advice, flexible financing, genuine Case parts and fast service. We’re here to provide you with the ultimate ownership experience. To locate a Case dealer or learn more about Case equipment or customer service, go to www.casece.com CASE NEW HOLLAND CONSTRUCTION EQUIPMENT (INDIA) PRIVATE LIMITED B1-207, 2nd Floor, Boomerang, Chandivali Farm Road Near Chandivali Studio, Andheri (East) Mumbai – 400072, Maharashtra, India Email:[email protected] NOTE: CASE provides specific outfits for various countries and many optional fittings (OPT). The illustrations on this or other leaflets may relate to standard or optional fittings. Please consult your CASE dealer for any information in this regard and any possible updating on components. CNH Industrial reserves the right to modify machine specifications without incurring any obligation relating to such changes.