docKERAPLATTE® ORIGINAL EXTRUDED CERAMICS
download 
Report Transcription
KERAPLATTE® ORIGINAL EXTRUDED CERAMICS
Classic for indoors and outdoors KERAPLATTE® DURO truded ce ex 88 4 – e1 r – sinc frost res a ist nt – te e* ely – Complet S trö he mic ra – Original KERAPLATTE® COMBI KERAPLATTE® TERRA KERAPLATTE® ORIGINAL EXTRUDED CERAMICS 2 5n yea r guara ORIGINAL EXTRUDED CERAMICS A classic for indoors and outdoors: Trim pieces: adding profile to surfaces For floor ceramics the difference in convenience lies in the variety of trim pieces. For trim pieces aim to solve ceramic problems and in the search for the perfect flooring solution they open up a new dimension in the true Variety of trim pieces sense of the word. In this way the two-dimensional floor also receives a profile. Wall joints, stairs - corners and edges – none of these are a problem. Florentine steps make corners round. This not only enhances the visual appeal but above all adds the perfect finishing touch. Clay slab: extrusion The variety of trim pieces is made possible by a special Complex shapes such as curves and corners of production process that we specialise in at STRÖHER: Florentine steps and side pieces are difficult to press extrusion. Whilst ceramic products are pressed in- out. However no matter how elaborate the shape may dividually out of dry granulate in other types of ma- be, this can be obtained from a flexible clay slab. nufacture, in extrusion the desired shape is obtained A variety of shaped pieces! Simply convenient! For from a continuous flexible clay slab and then cut in one quickly realises how convenient it is to have the profile! A cross section of different thicknesses adds perfect corners, skirting boards, stair risers and stair additional variety! edges to match the floor design. unglazed and colour intensive – original and enduring KERAPLATTE® COMBI Universal allrounder: An understatement and still homely KERAPLATTE® DURO Glazed colours: Wide selection of laying possibilities – can take a lot of punishment KERAPLATTE® COMBI Unmistakably tunnel kiln fired: KERAPLATTE® DURO KERAPLATTE® TERRA KERAPLATTE® TERRA original extruded ceramics ORIGINAL EXTRUDED CERAMICS A classic for indoors and outdoors: Tunnel kiln fired: Exceptional colour development and extreme resilience: The result of many years experience. Tunnel kiln fired Unglazed, original and robust: These are the classical characteristics of a tunnel kiln fired ceramic. However, in this short text neither the character nor the power of expression of tunnel kiln ceramic is given its due worth. Also because the special firing process assures exactly that, which is not exactly present in today’s normal industrial manufacture: Time – a lot of time to create the right properties. The tunnel kiln process takes about 36 to 48 hours. The transitions between the heating up, firing and cooling stages of the kiln run are structured carefully and given sufficient duration. It is this characteristic firing profile, which is decisive for the product’s properties. Without exception it co-determines the extraordinary colour development and extreme resilience of the ceramic. An especially homogeneous pore structure and a completely sintered and coloured throughout ceramic body bring braking strength and load bearing strength. The optimal balance of the rate of decomposition and formation reactions during the tunnel kiln firing permits this. Tunnel kilns are easy to regulate with regard to their firing temperature and kiln atmosphere. In addition what takes a long time to produce is also totally magnificent without glazing. This is because there is also enough time for the chemical colour reaction to take place during the tunnel kiln firing – time for the colour to develop. Frost resistance: Standard and reality frost res te i nce sta Comp le 25-year STRÖHER frost resistance guarantee * 25-year guarantee Seasonal changes in temperature put an outdoors ceramic floor covering to an extremely hard test. Especially In spring and autumn nights can often be frosty – but the midday sun can be very strong. So the ceramic has to withstand freeze and thaw, and even temperature fluctuations of up to 70°C between freeze and thaw. Thus careful, professional laying of the tiles is just as much a basic requirement as the frost resistance of the ceramic itself. Ceramic obtains the quality seal “frost resistant” if it conforms to the test standard DIN EN ISO10545-12. However, the test conditions necessary for this of simulated fluctuations between frostthaw cycles of +5 °C to –5 °C under laboratory conditions do not reflect reality. From our experience, for tiling and for specific product features, there are three reasons why only extruded ceramic can offer complete frost resistance long-term and not pressed fine stoneware ceramic. * STRÖHER is the only German manufacturer offering a 25-year frost resistance guarantee on all extruded products that have been correctly installed by a qualified professional tiler. Three reasons: Back surface structure Back surface: Dry pressed fine stoneware Fine stoneware tiles are formed through pressing dry granulate. As a result of the pressing, the back surface structure is nearly glass-like, which offers hardly any grip to bonding materials when laying tiles and causes them to detach more easily when subject to thermal tension. KERAPLATTE® DURO KERAPLATTE® COMBI KERAPLATTE® TERRA original extruded ceramics Back surface: Extruded stoneware tiles The naturally structured back surfaces of extruded ceramic cut from continuous damp clay slabs provide an optimal grip for bonding when laying. Water absorption The slight water absorption rate of fine stoneware tiles also means only a slight release of water. Even the smallest amount of water, which is sweated due to the tiling properties and which cannot find a natural way to disperse, will force its way out through the tiles cracking them. Pore structure When dry clay granules are pressed this gives rise to an irregular particle layout in the fine stoneware body causing cavities that store permeated water long-term. Whereas extruded ceramic has a homogenous particle structure that creates capillary channels. These capillary channels allow the permeated water to disperse in the fastest way possible, frost damage can not occur. ORIGINAL EXTRUDED CERAMICS frost res te i * 25-year guarantee Tunnel kiln fired Easy maintenance and hygienic Abrasion resistant Anti-splip Glow and fireproof Anti-static Variety of trim pieces In compliance with DIN EN Resistant to chemicals Fade-free and colourfast Environmentally friendly 9240 stairtread tile R 11/B nce sta Comp le Unmistakably tunnel kiln fired: 9331 stairtread corner tile 9000 riser corner 9005/9006 stair skirting left/right 2116 skirting 4000 coved base te e* – Complet 5n yea r guara spectacularly natural. For ceramic made by the tunnel kiln process is in its most historical perhaps even in its original form. No glazing is needed to achieve these intensive colours or the unmistakable changing play of colours. The special tunnel kiln firing process used for this series produces its own out unique, naturally beautiful KERAPLATTE COMBI ® colours and robustness goes without saying. KERAPLATTE TERRA Genuine original and at the same time the warm earth colours and the unglazed surfaces allow the floor to look ® 4 nt – 88 frost res a ist e1 r – sinc ely 2 S trö he d ed c e – TERRA KERAPLATTE® TERRA tru ex mic ra – Original unglazed and colour intensive – original and enduring 313 autumn 316 patrician red flashed 215 patrician red KERAPLATTE DURO ® 307 wheat 4812 angle tile 4822 angle tile 4824 angle tile with grooves 4004 coved base inner corner 4005 coved base outer corner ORIGINAL EXTRUDED CERAMICS Universal allrounder: 865 helicon * 25-year guarantee Variety of trim pieces Easy maintenance and hygienic Abrasion resistant Anti-splip Glow and fireproof Anti-static In compliance with DIN EN Resistant to chemicals Fade-free and colourfast Environmentally friendly nce sta te e* KERAPLATTE COMBI Hard-glaze PEI 5 KERAPLATTE DURO frost res te i ® STRÖHER Comp le ® ® remains – completely unaffected by every new trend. 5n yea r guara KERAPLATTE TERRA Inside and outside. Also – with shape and size freedom and frost proof too. The furniture changes, the floor – Complet 4 88 healthy well-being. In touch with nature, holistic living. Nothing distracts. The individual becomes the whole. nt – Universal allrounder: An understatement and still stylish, giving lasting impression. A feeling of homely and frost res a ist e1 r – sinc ely 2 S trö he d ed c e – COMBI KERAPLATTE® COMBI tru ex mic ra – Original An understatement and still homely ORIGINAL EXTRUDED CERAMICS Glazed colours: 9240 stairtread tile 10 9331 stairtread corner tile 4822 angle tile 4824 angel tile with grooves 2116 skirting d ed c e te e* – Complet 4 88 nt – 5n yea r guara e1 r – sinc 2 S trö he frost res a ist ely – DURO KERAPLATTE® DURO tru ex mic ra – Original wide selection of laying possibilities – can take a lot of punishment ® This tunnel kiln fired series is resilient. It also allows for diverse and creative laying, giving a comfortable mix. KERAPLATTE TERRA The especially hard glazing is uncommon at this place. This is because the earth colours of tunnel kiln products are also beautiful without glaze. However, as usual there is a good reason for this, and the simplicity is a question KERAPLATTE COMBI ® of taste. So or so: With extruded ceramic the patio does not only look great in summer. 803 elba 825 sherry 850 garda KERAPLATTE DURO ® 804 bossa frost res te i Hard-glaze * 25-year guarantee Variety of trim pieces Easy maintenance and hygienic Abrasion resistant Anti-splip Glow and fireproof Anti-static Tunnel kiln fired In compliance with DIN EN Resistant to chemicals Fade-free and colourfast Environmentally friendly 9000 riser corner 9005/9006 stair skirting pair left/right PEI 5 nce sta Comp le STRÖHER R 9/A 11 KeraPLATTE® Terra DIN EN 14411, Gr. AIIa - Part 1 1100 split tile 1610 split tile 9520 split tile1) 9310 stairtread tile1) 9320 stairtread tile1) 9330 stairtread tile1) 9240 stairtread tile 240 x 115 x 10 240 x 240 x 12 294 x 294 x 12 300 x 115 x 14 300 x 240 x 14 300 x 294 x 14 345 x 240 x 14 9331 stairtread corner tile 9000 riser corner 9005 stair skirting left 9006 stair skirting right 2116 skirting 4000 coved base1) 4004 coved base inner corner1) 345 x 345 x 14 157 x 60 x 60 x 11 angle length 290 angle length 290 240 x 73 x 10 240 x 96 x 12 120 x 96 x 12 Format no. Description 4005 cover base outer corner1) 4812 angle tile1) 4822 angle tile 4824 angle tile with grooves angle tile with raised edge and shank1) 4826 4892 angle tile with Florentine edge1) 3491 window sill tile1) Production size in mm 120 x 96 x 12 240 x 175 x 52 x 10 240 x 115 x 52 x 10 240 x 115 x 52 x 10 240 x 115 x 52 x 10 240 x 115 x 52 x 10 240 x 240 x 12 Production size in mm Format no. Description Production size in mm KeraPLATTE® Combi DIN EN 14411, Gr. AI (previously DIN EN 121) Format no. Description Production size in mm 1100 split tile 8081 stoneware tile 8031 stoneware tile 4822 angle tile 4838 angle tile with raised edge and shank 8101 skirting 240 x 115 x 10 240 x 240 x 10 294 x 294 x 10 240 x 115 x 52 x 10 294 x 115 x 52 x 10 240 x 73 x 8 8106 skirting 8181 stairtread tile 8131 stairtread tile 294 x 73 x 8 300 x 240 x 10 300 x 294 x 10 Format no. Description Production size in mm KeraPLATTE® DURO DIN EN 14411, Gr. AIIa - Part 1 Format no. Description Production size in mm Format no. Description Production size in mm 1) glazed glazed (previously DIN EN 186, Part 1) 1100 split tile1) 1610 split tile1) 4822 angle tile angle tile with raised edge and shank1) 4826 4824 angle tile with grooves1) 2116 skirting 9240 stairtread tile1) 240 x 115 x 10 240 x 240 x 12 240 x 115 x 52 x 10 240 x 115 x 52 x 10 240 x 115 x 52 x 10 240 x 73 x 10 345 x 240 x 14 9331 stairtread corner tile1) 9000 riser corner1) 9005 stair skirting pair left1) 9006 stair skirting pair right1) 345 x 345 x 14 157 x 60 x 60 x 11 angle length 290 angle length 290 = Not availbale in all colours. The formats shown are illustrative drawings and are not binding. All information without guarantee. Colour, dimensions and accessories selection according to table in the current STRÖHER-delivery program. Ströher GmbH Kasseler Straße 41 D-35683 Dillenburg Tel.: +49 (0) 27 71 / 391-0 Fax: +49 (0) 27 71 / 391-340 E-Mail: [email protected] www.stroeher.de 0708/02/025 Format no. Description unglazed (previosly DIN EN 186, Part 1)
