Mini Hot Runner For Unit Die Molds

Mini Hot Runner
Mini
Hot Runner
For Unit Die Molds
FROM
2.375
FROM
1.875
n
o
i
t
a
v
o
n
Where In
s
w
Flo
INDEX
Mini Hot Runner for Unit Die Molds
Page
✩ AFS – 20 G & H / Boring
1-2
✩ BLS – 20 G & H / Boring
3-4
✩ FBS – 20 G & H / Boring
5-6
✩ RGS – 20 G & H / Boring
7-8
✩ Mini – MGN – 1000
9
✩ Mini – MGN – 1500
10
✩ Mini – MGN – 1700
11
✩ Mini – MGN – 2000
12
✩ Mini – MGN – Boring
13
Index
✩ Features and Benefits
Mini-MGN (Multiple Gate Nozzle)
2.375”
Balanced
Fill
1-8 Gates
FROM
Maximum 2"
“D” Diameter
Temperature
Control
at Each
Gate
Mini-HSN “G” (Hot Sprue Nozzle)
1.875”
Better
Gate
Cosmetics
FROM
Mini-HSN “H” (Hot Sprue Nozzle)
2.375”
FROM
(800) 499-OSCO • www.oscosystems.com
Temperature Control Each Gate
T/C
Thermocouple Control
Hardened Probe
Field Serviceable
MGN BODY
HEATER
HEATER
RETAINER
SCREWS
MGN CAP
RETAINER SCREWS
MGN CAP
TCH PROBE
HEATER
MGN PROBE
MGN MAIN
BODY
MGN PROBE
SEAL
TIPS & NEEDLES
GNT
GNF
BLT
FBT
AFT
FBTX
AFTX
STANDARD
COMPONENTS
IN STOCK
(800) 499-OSCO • www.oscosystems.com
MIM
MIM
Process
Process
AFS-20-G/H HSN - MINI
The "AFS" Absolute Flow Style HSN MINI - 20 Series Hot Sprue Nozzle utilizes a Ø.156 resin feed. The "G" Style Nozzle is
engineered for general purpose resins and the "H" Style Nozzle is engineered for the toughest High Heat / Heat Sensitive Resins.
"G" STYLE
"H" STYLE
For Processing Temps (<500°F)
.350 HEAD
HEIGHT
RETAINED BY (2)
#8-32 S.H.C.S.
n.156
FLOW
"R" RADIUS
For Processing Temps (>500°F)
RETAINING RING
n.156
HEAD HEATER
FLOW
"R" RADIUS
FLEXIBLE HEATER
AND T/C LEADS
FLEXIBLE HEATER
AND T/C LEADS
.875 HEAD
HEIGHT
.060
CONTACT
Ø1.500 HEAD
NOZZLE BODY
HEATER
"A" DIM.
"A" DIM.
n.750 HEATER
Ø1.500 HEAD
NOZZLE BODY
HEATER
n.750 HEATER
CLEARANCE
.060
CONTACT
CLEARANCE
CONTACT
LAND
"L" DIM.
CONTACT
LAND
"T" DIA.
"T" DIA.
"L" DIM.
n.156
FLOW
n.156
FLOW
n.156
FLOW
n.156
FLOW
"A" DIM.
30°
.500 OPTIONAL
EXTRA STOCK
n.060
n.060
Ø.093
6°
6°
6°
RADIUS FLOW
TIP OPTION
STANDARD
TIP
"O" DIA.
HI FLOW
TIP OPTION
6°
EXTRA STOCK
TIP OPTION
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
"A" DIM.
NOZZLE TYPE
A F
S 0
HOW TO ORDER:
Specify dimensions
by completing the
following
chart.
NOZZLE
TYPE
STYLE
"T" TIP
G = Style
H = Style
3 = Ø.375
5 = Ø.500
7 = Ø.750
"L" LAND
RETAINING RING
"O" GATE "R" RADIUS
"H" STYLE ONLY
2
1.500" = 15
2.000" = 20
2.500" = 25
3.000" = 30
Call:
1-800-499-OSCO
Std. = S
Extra
Stock = X
06 = Ø.060
09 = Ø.093
1/2 = 5
3/4 = 7
Y = Yes
N = No
Specify resin to be processed.
NOTE: For sizes other than shown, please contact Osco Tech Service.
1.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
AFS-20-G/H MINI - BORING
WIRE SLOT
LENGTH TO SUIT
.600
WIRE SLOT
LENGTH TO SUIT
.600
n.126 +- .001
.000 BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.001
n.126 +- .000
BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.500 WIRE
SLOT
n1.500
.500 WIRE
SLOT
n2.000
8-32 UNC - 2B .500 DP.
n.313 - .225 DP.
(2) PLACES - AS SHOWN
ON A Ø1.500 B.C.
45°
8-32 UNC - 2B .500 DP.
(2) PLACES - AS SHOWN
ON A Ø2.000 B.C.
"G" STYLE
"H" STYLE
BORING INFORMATION
BORING INFORMATION
Ø2.500
CLEARANCE
Ø1.52
CLEARANCE
.225 DP.
.375
C'BORE
Ø1.63 HEAD
CLEARANCE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
Ø1.501 +- .001
.000
CONTACT
.805
.320
C'BORE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
.060
CONTACT
"AA" DIM.
.060
"AA" DIM. CONTACT
n.750 NOZZLE HEATER
CLEARANCE
Ø.750 NOZZLE HEATER
CLEARANCE
30°
30°
'T" DIA.
BORE
CONTACT
LAND
CONTACT
LAND
"T" DIA.
BORE
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
*
TIP INFORMATION
BORING INFORMATION
"T" DIA.
"L" DIM.
"T" DIA. +.0005
BORE -.0000
CONTACT
LAND
.375
.182
.3755
.060
.500
.182
.5005
.080
.750
.182
.7505
.080
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
2.0
BLS-20-G/H HSN - MINI
The "BLS" Body Less Style HSN MINI - 20 Series Hot Sprue Nozzle utilizes a Ø.156 resin feed. The "G" Style Nozzle is
engineered for general purpose resins and the "H" Style Nozzle is engineered for the toughest High Heat / Heat Sensitive Resins.
.350 HEAD
HEIGHT
"G" STYLE
"H" STYLE
For Processing Temps (<500°F)
For Processing Temps (>500°F)
n.156
FLOW
"R" RADIUS
RETAINED BY (2)
#8-32 S.H.C.S.
n.156
FLOW
"R" RADIUS
RETAINING RING
HEAD HEATER
FLEXIBLE HEATER
AND T/C LEADS
FLEXIBLE HEATER
AND T/C LEADS
.875 HEAD
HEIGHT
Ø1.500
HEAD
.060
CONTACT
"A" DIM.
NOZZLE BODY
HEATER
"A" DIM.
n.750 HEATER
Ø1.500
HEAD
.060
CONTACT
NOZZLE BODY
HEATER
n.750 HEATER
CLEARANCE
CLEARANCE
"T" DIA.
"T" DIA.
GATE "O" DIA.
GATE "O" DIA.
*
*
n.156
FLOW
n.156
FLOW
"A" DIM.
.125 TIP
SET BACK
.125 TIP
SET BACK
NEEDLE
SET BACK
"T" DIA.
NEEDLE
SET BACK
"T" DIA.
GENERAL
NEEDLE (GNT)
STANDARD
FLOW THRU
NEEDLE (GNF)
OPTIONAL
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
NOZZLE TYPE
B L S
0
HOW TO ORDER:
Specify dimensions
by completing the
following chart.
"A" DIM.
STYLE
1.500" = 15
2.000" = 20
2.500" = 25
3.000" = 30
G = Style
H = Style
"O" GATE
"R" RADIUS
RETAINING RING
"H" STYLE ONLY
2
Call:
1-800-499-OSCO
"O"
*Specify
MIN. = .030
1/2 = 5
3/4 = 7
Y = Yes
N = No
MAX. = .060
Specify resin to be processed.
NOTE: For sizes other than shown, please contact Osco Tech Service.
3.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
BLS-20-G/H MINI - BORING
WIRE SLOT
LENGTH TO SUIT
.600
WIRE SLOT
LENGTH TO SUIT
.600
n.126 +- .001
.000 BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.001
n.126 +- .000
BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.500 WIRE
SLOT
n1.500
8-32 UNC - 2B - .500 DP.
n.313 - .225 DP.
(2) PLACES - AS SHOWN
ON A Ø1.500 B.C.
45°
.500 WIRE
SLOT
n2.000
8-32 UNC - 2B .500 DP.
(2) PLACES - AS SHOWN
ON A Ø2.000 B.C.
"G" STYLE
"H" STYLE
BORING INFORMATION
BORING INFORMATION
Ø2.500
CLEARANCE
.225 DP.
Ø1.52 HEAD
CLEARANCE
.375
C'BORE
Ø1.501 +- .001
.000
CONTACT
Ø1.63 HEATER
CLEARANCE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
.320
.875
C'BORE
.060
CONTACT
"AA" DIM.
.060
CONTACT
"AA" DIM.
n.750 NOZZLE HEATER
Ø.750 NOZZLE HEATER
CLEARANCE
CLEARANCE
n.3755 +- .0005
.0000 C'BORE
n.156
R.078
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
(DUE TO THE BODY LESS NOZZLE DESIGN, THERMAL EXPANSION
DOES NOT NEED TO BE CONSIDERED FOR STD. NOZZLE LENGTH)
90°
"AA" DIM.
30°
.010 @
TANGENT
.180
.100
GATE "O" DIA.
(.030 MIN - .060 MAX.)
BLS-20
GATE AREA
*
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
.005 LAND
4.0
FBS-20-G/H HSN - MINI
The "FBS" Full Body Style HSN MINI - 20 Series Hot Sprue Nozzle utilizes a Ø.156 resin bore. The "G" Style Nozzle is
engineered for general purpose resins and the "H" Style Nozzle is engineered for the toughest High Heat / Heat Sensitive Resins.
"G" STYLE
"H" STYLE
For Processing Temps (<500°F)
For Processing Temps (>500°F)
RETAINED BY (2)
#8-32 S.H.C.S.
n.156
.350 HEAD
HEIGHT
FLOW
"R" RADIUS
n.156
FLOW
"R" RADIUS
FLEXIBLE HEATER
AND T/C LEADS
RETAINING RING
HEAD HEATER
FLEXIBLE HEATER
AND T/C LEADS
.875 HEAD
HEIGHT
Ø1.500
HEAD
.060
CONTACT
"A" DIM.
NOZZLE BODY
HEATER
"A" DIM.
Ø1.500
HEAD
.060
CONTACT
n.750 HEATER
n.750 HEATER
CLEARANCE
CLEARANCE
CONTACT
LAND
"L" DIM.
"T" DIA.
CONTACT
LAND
GATE "O" DIA.
"L" DIM.
n.156
FLOW
NOZZLE BODY
HEATER
n.156
FLOW
"T" DIA.
GATE "O" DIA.
n.156
FLOW
n.156
FLOW
"A" DIM.
STD.
30°
GATE "O" DIA.
.500 OPTIONAL
EXTRA STOCK
STD.
FIT.
GATE "O" DIA.
GATE "O" DIA.
GATE "O" DIA.
6°
6°
GENERAL
NEEDLE (GNT)
STANDARD
GENERAL NEEDLE (GNT)
EXTRA STOCK
STANDARD
FLOW THRU
NEEDLE (GNF)
OPTIONAL
FLOW THRU NEEDLE (GNF)
EXTRA STOCK TIP
OPTIONAL
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
NOZZLE TYPE
F B
S 0
HOW TO ORDER:
Specify dimensions
by completing the
following chart.
"A" DIM.
STYLE
"T" TIP
"L" LAND
"O" GATE "R" RADIUS
RETAINING RING
"H" STYLE ONLY
2
1.500" = 15
2.000" = 20
2.500" = 25
3.000" = 30
G = Style
H = Style
3 = Ø.375
5 = Ø.500
7 = Ø.750
Std. = S
Extra
Stock = X
04 = Ø.040
06 = Ø.060
1/2 = 5
3/4 = 7
Y = Yes
N = No
Call:
1-800-499-OSCO
NOTE: For sizes other than shown, please contact Osco Tech Service.
5.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
FBS-20-G/H MINI - BORING
WIRE SLOT
LENGTH TO SUIT
.600
WIRE SLOT
LENGTH TO SUIT
.600
.001
n.126 +- .000
BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
n.126 +- .001
.000 BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.500 WIRE
SLOT
n1.500
.500 WIRE
SLOT
n2.000
8-32 UNC - 2B .500 DP.
n.313 - .225 DP.
(2) PLACES - AS SHOWN
ON A Ø1.500 B.C.
45°
8-32 UNC - 2B .500 DP.
(2) PLACES - AS SHOWN
ON A Ø2.000 B.C.
"G" STYLE
"H" STYLE
BORING INFORMATION
BORING INFORMATION
Ø2.500
CLEARANCE
Ø1.52
CLEARANCE
.225 DP.
.375
C'BORE
Ø1.63 HEAD
CLEARANCE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
.805
C'BORE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
.320
.060
CONTACT
"AA" DIM.
.060
"AA" DIM. CONTACT
n.750 NOZZLE HEATER
CLEARANCE
Ø.750 NOZZLE HEATER
CLEARANCE
30°
30°
'T" DIA.
BORE
CONTACT
LAND
CONTACT
LAND
"T" DIA.
BORE
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
TIP INFORMATION
BORING INFORMATION
"T" DIA.
"L" DIM.
"T" DIA. +.0005
BORE -.0000
CONTACT
LAND
.375
.182
.3755
.060
.500
.182
.5005
.080
.750
.182
.7505
.080
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
* formulation
is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
6.0
RGS-20-G/H HSN - MINI
The "RGS" Recessed Gate Full Body Style HSN MINI - 20 SerIes Hot Sprue Nozzle utilizes a Ø.156 resin bore. The "G" Style Nozzle
is engineered for general purpose resins and the "H" Style Nozzle is engineered for the toughest High Heat / Heat Sensitive Resins.
"G" STYLE
"H" STYLE
For Processing Temps (<500°F)
For Processing Temps (>500°F)
"R" RADIUS
RETAINED BY (2)
#8-32 S.H.C.S.
Ø.156
FLOW
RETAINING RING
Ø.156
FLOW
"R" RADIUS
HEAD HEATER
FLEXIBLE HEATER
AND T/C LEADS
.375 C'BORE
FLEXIBLE HEATER
AND T/C LEADS
.805 C'BORE
Ø1.500
HEAD
.350 HEAD
HEIGHT
Ø1.500
HEAD
NOZZLE BODY
HEATER
"A" DIM.
CONTACT
LAND
n.750 HEATER
n.750 HEATER
CLEARANCE
CLEARANCE
"T" DIA.
CONTACT
LAND
"T" DIA.
GATE "O" DIA.
"L" DIM.
NOZZLE BODY
HEATER
"A" DIM.
GATE "O" DIA.
"L" DIM.
FULL TIP RADIUS
PARTIAL TIP RADIUS
“A” DIM.
(COLD)
“AA” DIM.
(HOT)
THERMAL
EXPANSION
.030 RECESS
"AA" DIM.
(HOT)
“A” DIM.
(COLD)
THERMAL
EXPANSION
.030 RECESS
"T" DIA.
3/4 OF "T" DIA.
PART
PART
SHOWN HOT
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
NOZZLE TYPE
R G S
0
HOW TO ORDER:
Specify dimensions
by completing the
following chart.
"A" DIM.
STYLE
"T" TIP
DIMPLE
"O" GATE
"R" RADIUS RETAINING RING
"H" STYLE ONLY
2
1.500" = 15
2.000" = 20
2.500" = 25
3.000" = 30
G = Style 3 = Ø.375
H = Style 5 = Ø.500
7 = Ø.750
Call:
1-800-499-OSCO
F = "T" DIA.
P = 3/4 OF "T" DIA.
04 = Ø.040
06 = Ø.060
1/2 = 5
3/4 = 7
Y = Yes
N = No
Specify resin to be processed.
NOTE: For sizes other than shown, please contact Osco Tech Service.
7.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
RGS-20-G/H MINI - BORING
WIRE SLOT
LENGTH TO SUIT
.600
WIRE SLOT
LENGTH TO SUIT
.600
n.126 +- .001
.000 BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.001
n.126 +- .000
BORE - .270 DP.
(180° FROM NOZZLE LEAD EXIT
FOR A Ø1/8" x 1/2" LG. DOWEL)
.500 WIRE
SLOT
n1.500
8-32 UNC - 2B .500 DP.
n.313 - .225 DP.
(2) PLACES - AS SHOWN
ON A Ø1.500 B.C.
45°
.500 WIRE
SLOT
n2.000
8-32 UNC - 2B .500 DP.
(2) PLACES - AS SHOWN
ON A Ø2.000 B.C.
"G" STYLE
"H" STYLE
BORING INFORMATION
BORING INFORMATION
Ø2.500
CLEARANCE
Ø1.52
CLEARANCE
.225 DP.
.375
C'BORE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
Ø1.63 HEAD
CLEARANCE
WIRE SLOT DEPTH TO BE
1/8" BELOW C'BORE
Ø1.501 +- .001
.000
CONTACT
.805
.320
C'BORE
.060
CONTACT
"AA" DIM.
.060
"AA" DIM. CONTACT
n.750 NOZZLE HEATER
CLEARANCE
Ø.750 NOZZLE HEATER
CLEARANCE
30°
30°
'T" DIA.
BORE
CONTACT
LAND
CONTACT
LAND
"T" DIA.
BORE
THERMAL EXPANSION NOTE
"AA" DIM. = "A" DIM. + THERMAL EXPANSION
EXPANSION = "A" DIM. X .00000633 X (PROCESSING TEMP. - 68°F)
TIP INFORMATION
BORING INFORMATION
"T" DIA.
"T" DIA. +.0005
BORE -.0000
"L" DIM.
CONTACT
LAND
.375
.182
.3755
.040 MIN.
.500
.182
.5005
.040 MIN.
.750
.182
.7505
.040 MIN.
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
* formulation
is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
8.0
MINI-MGN-1000
Multiple Gate Nozzle System, “MINI - MGN” SERIES 1000
NOZZLE DESCRIPTION: The "MINI-MGN" 1000 Series Multiple Gate Nozzle features up to four individually controlled probes
positioned on a 1.000" "D" Diameter. The "MINI-MGN" Nozzle offers design flexibility with three standard "A" length dimensions, a
1/2" or 3/4" spherical radius for direct feed applications, or a pocket for an SR-716 seal ring for use with a manifold.
NOTE: Maximum number of probes for a Series 1000 MINI - MGN is four (4).
1 TO 4 PROBES AVAILABLE FOR Ø1/2" BORE
1 TO 3 PROBES AVAILABLE FOR Ø5/8" BORE
OPTIONAL MGN
LOCATING RING
FOR DIRECT FEED
APPLICATION
n.250
FLOW
"R" RADIUS
n2.749 MAJOR
DIAMETER
PROBE SEAL
1.562 `.001
MGN BODY
"A" DIM.
XT DIM.
.020
RELIEF
Ø1/4" MGN
TIMING DOWEL
Ø1/4" x .375 DP.
FOR TIMING DOWEL PIN
(Shown out of position)
Ø1.000 "D" DIA.
n.625
PROBE
BORE
PROBE SEAL
PROBE SEAL
n.500
PROBE
BORE
2.000
"A" DIM.
VIEW FROM PARTING LINE
.000
.937 +- .001
TO CAVITY
.927 XT
2.500
"A" DIM.
.437 +- .000
.001
TO CAVITY
.427 XT
"A" DIM = 2.500
"A" DIM = 2.000
HOW TO ORDER
CATALOG
NUMBER
NOZZLE
"A" DIM.
MGN MINI -1020
MGN MINI -1025
ASSEMBLY INCLUDES
Specify:
● Nozzle Catalog Number
PROBE
PART NUMBER
PROBE HEATER
PART NUMBER
BODY HEATER
PART NUMBER
MAX. NUMBER
OF PROBES
2.000
PROBE-MGN-200
TCH-2150-90
MBHT-2510
4
● Number of Probes
2.500
PROBE-MGN-250
TCH-2200-90
MBHT-2510
3
● Application Pocket
- 1/2" or 3/4" Radius for Direct feed Application
● Resin to be Processed
● "D" Diameter
NOTE: For sizes other than shown, please contact Osco Tech Service.
9.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
MINI-MGN-1500
Multiple Gate Nozzle System, “MINI-MGN” SERIES 1500
NOZZLE DESCRIPTION: The "MINI-MGN" 1500 Series Multiple Gate Nozzle features up to six individually controlled probes
positioned on a 1.500" "D" Diameter. The "MINI-MGN" Nozzle offers design flexibility with three standard "A" length dimensions, a
1/2" or 3/4" spherical radius for direct feed applications, or a pocket for an SR-716 seal ring for use with a manifold.
NOTE: Maximum number of probes for a Series 1500 MGN is six (6).
n.312
FLOW
R.505
1 TO 6 PROBES
AVAILABLE
OPTIONAL MGN
LOCATING RING
FOR DIRECT FEED
APPLICATION
n2.749 MAJOR
DIAMETER
SEAL RING
1.562 `.001
MGN BODY
"A" DIM.
XT DIM
.020
RELIEF
Ø1.500 "D" DIA.
PROBE SEAL
PROBE SEAL
Ø1/4" MGN
TIMING DOWEL
Ø1/4" x .375 DP.
FOR TIMING DOWEL PIN
(Shown out of position)
(Not Supplied)
n.500
PROBE
BORE
2.000
"A" DIM.
VIEW FROM PARTING LINE
n.625
PROBE
BORE
.937 +- .000
.001
TO CAVITY
.927 XT
2.500
"A" DIM.
.437 +- .000
.001
TO CAVITY
.427 XT
"A" DIM = 2.500
"A" DIM = 2.000
HOW TO ORDER
Specify:
● Nozzle Catalog Number
● "D" Diameter
● Number of Probes
● Application Pocket
- 1/2" or 3/4" Radius for Direct feed Application
● Resin to be Processed
CATALOG
NUMBER
NOZZLE
"A" DIM.
ASSEMBLY INCLUDES
PROBE
PART NUMBER
PROBE HEATER
PART NUMBER
BODY HEATER
PART NUMBER
MAX. NUMBER
OF PROBES
MGN-MINI-1520
2.000
PROBE-MGN-200
TCH-2150-90
MBHT-2510
6
MGN-MINI-1525
2.500
PROBE-MGN-250
TCH-2200-90
MBHT-2510
6
NOTE: For sizes other than shown, please contact Osco Tech Service.
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
* formulation
is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
10.0
MINI-MGN-1700
Multiple Gate Nozzle System, “MINI-MGN” SERIES 1700
NOZZLE DESCRIPTION: The "MINI-MGN" 1700 Series Multiple Gate Nozzle features up to six individually controlled probes
positioned on a 1.750" "D" Diameter. The "MINI-MGN" Nozzle offers design flexibility with three standard "A" length dimensions, a
1/2" or 3/4" spherical radius for direct feed applications, or a pocket for an SR-916 seal ring for use with a manifold.
NOTE: Maximum number of probes for a Series 1700 MGN is six (6).
1 TO 6 PROBES
AVAILABLE
OPTIONAL MGN
LOCATING RING
FOR DIRECT FEED
APPLICATION
n.312
FLOW
"R" RADIUS
n2.749 MAJOR
DIAMETER
PROBE SEAL
1.562 +- .001
.000
"A" DIM.
XT DIM.
Ø1/4" MGN
TIMING DOWEL
.020
RELIEF
Ø1/4" x .375 DP.
FOR TIMING DOWEL PIN
(Shown out of position)
Ø1.750 "D" DIA.
n.625
PROBE
BORE
PROBE SEAL
PROBE SEAL
n.500
PROBE
BORE
2.000
"A" DIM.
VIEW FROM PARTING LINE
.937 +- .000
.001
TO CAVITY
.927 XT
2.500
"A" DIM.
.437 +- .000
.001
TO CAVITY
.427 XT
"A" DIM = 2.500
"A" DIM = 2.000
HOW TO ORDER
ASSEMBLY INCLUDES
CATALOG
NUMBER
NOZZLE
"A" DIM.
PROBE
PART NUMBER
PROBE HEATER
PART NUMBER
BODY HEATER
PART NUMBER
MAX. NUMBER
OF PROBES
Specify:
● Nozzle Catalog Number
● "D" Diameter
MGN-MINI-1720
2.000
PROBE-MGN-200
TCH-2150-90
MBHT-2710
6
● Number of Probes
MGN-MINI-1725
2.500
PROBE-MGN-250
TCH-2200-90
MBHT-2710
6
● Application Pocket
- 1/2" or 3/4" Radius for Direct feed Application
● Resin to be Processed
NOTE: For sizes other than shown, please contact Osco Tech Service.
11.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
*
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
MINI-MGN-2000
Multiple Gate Nozzle System, “MINI-MGN” SERIES 2000
NOZZLE DESCRIPTION: The "MINI-MGN" 2000 Series Multiple Gate Nozzle features up to eight individually controlled probes
positioned on a 2.000" "D" Diameter. The "MINI-MGN" Nozzle offers design flexibility with three standard "A" length dimensions, a
1/2" or 3/4" spherical radius for direct feed applications, or a pocket for an SR-916 seal ring for use with a manifold.
NOTE: Maximum number of probes for a Series 2000 MGN is eight (8).
1 TO 8 PROBES AVAILABLE
n3.249 MAJOR
OPTIONAL MGN
LOCATING RING
FOR DIRECT FEED
APPLICATION
n.312 FLOW
"R" RADIUS
DIAMETER
PROBE SEAL
1.562 `.001
MGN BODY
"A" DIM.
XT DIM
Ø1/4" MGN
TIMING DOWEL
.020
RELIEF
Ø1/4" x .375 DP.
FOR TIMING DOWEL PIN
(Shown out of position)
Ø2.000 "D" DIA.
n.625
PROBE
BORE
PROBE SEAL
PROBE SEAL
n.500
PROBE
BORE
2.000
"A" DIM.
VIEW FROM PARTING LINE
.937 +- .000
.001
TO CAVITY
.927 XT
2.500
"A" DIM.
.437 +- .000
.001
TO CAVITY
.427 XT
"A" DIM = 2.500
"A" DIM = 2.000
HOW TO ORDER
Specify:
● Nozzle Catalog Number
CATALOG
NUMBER
NOZZLE
"A" DIM.
MGN-2020
MGN-2025
PROBE HEATER
PART NUMBER
BODY HEATER
PART NUMBER
MAX. NUMBER
OF PROBES
2.000
PROBE-MGN-200
TCH-2150-90
MBHT-3010
8
2.500
PROBE-MGN-250
TCH-2200-90
MBHT-3010
8
● "D" Diameter
● Number of Probes
● Application Pocket
- 1/2" or 3/4" Radius for Direct feed Application
● Resin to be Processed
*
ASSEMBLY INCLUDES
PROBE
PART NUMBER
Note: The information given here should be used as a guide. A variation in growth of any nozzle from the
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.
NOTE: For sizes other than shown, please contact Osco Tech Service.
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
12.0
MINI - MGN - BORING
"X" DIM.
5/16-18 UNC - .750 DP.
(4) PLACES EQUALLY SPACED
ON A 4.625 BOLT CIRCLE
(OPTIONAL LOCATING RING)
"W" DIM.
.000
Multiple Gate Nozzle System, “MINI-MGN” / MACHINING DETAILS
Ø1/4" MGN DOWEL LOCATION
DOWEL LOCATION MUST ALWAYS STAY
IN THE SAME ORIENTATION RELATIVE
TO THE REFERENCE PROBE
1.000 HEATER LEAD
CLEARANCE POCKET
R.250
TYP.
.750 WIRE
SLOT
"Y" DIM.
2.000 HEATER CLAMP
CLEARANCE POCKET
.000
"D" DIA.
.500 TYP.
REFERENCE PROBE
PLAN VIEW FROM MACHINE NOZZLE PERSPECTIVE
Ø5.500
OPTIONAL LOCATING RING
.750 DP. - C'BORE
(OPTIONAL LOCATING RING)
"C" DIA.
"P" DIA.
1.000 WIRE
SLOT
MGN BORE
45°
GATE WELL DEPTH
SEE CHART
CAVITY LINE
"D" DIA.
GATE WELL DETAILS
PROBE BORE
DIA.
.080
CONTACT
FLAT AND FREE OF
TOOL MARKS
90°
60°
90°
.010 @
TANGENT
.197 RAD.
CENTER
R.187
PARTING LINE
.003 LAND
R.187
"O" DIA.
.003 LAND
"O" DIA.
*
STANDARD GATE DETAIL
*
ENLARGED VIEW
*NOTE: MINIMUM GATE DIAMETERS ARE NOT ACCEPTABLE WITH ALL MATERIALS OR APPLICATIONS.
HOW TO ORDER
NOZZLE
"A" DIM.
NOZZLE
XT DIM.
GATE WELL
DEPTH +.000
-.001
PROBE
BORE DIA.
2.000
.427
.437
Ø.500
2.500
.927
.937
Ø.625
GATE "O" DIA.
*
MIN.
Ø.025
MAX.
Ø.125
OSCO INC. MGN NOZZLE ASSEMBLY BORING INFORMATION
"D" DIA. "P" DIA. "C" DIA.
1.000
2.751
3.125
1.500
2.751
3.125
1.750
3.000
3.375
2.000
3.250
3.625
"W" DIM.
.500
.750
.875
1.000
"X" DIM.
.900
.900
1.050
1.195
MAXIMUM NUMBER
OF GATE PROBES
"Y" DIM. "A" = 3 "A" > 3
.575
4
3
.575
6
6
.550
6
6
.550
8
8
NOTE: For sizes other than shown, please contact Osco Tech Service.
13.0
OSCO° inc.
RUNNERLESS MOLDING SYSTEMS
The information given here should be used as a guide. A variation in growth of any nozzle from the
* Note:
formulation is possible due to cooling conditions or mold configuration. It is advisable to allow a margin of
safety. For some very critical applications, an empirical factor may have to be obtained.