2P+E socket outlet - French standard IP 55

128, av. du Maréchal-de-Lattre-de-Tassigny - 87045 LIMOGES Cedex - France
Tel: 0 (+33) 5 55 06 87 87 Fax: 0 (+33) 5 55 06 88 88
www.legrand.com
Catalogue Number(s): 0 778 97/98 - 0 904 78
2P+E socket outlet - French standard
IP 55 - IK 10
CONTEXT
MODES 1 & 2
VEHICLE MANUFACTURER RANGE
PEUGEOT
CITRÖEN
DAIMLER
VOLVO
OPEL
MIA ELECTRIC
MITSUBISHI
BUILDING ELECTRICAL INFRASTRUCTURE RANGE
Charged using a conventional socket
The charge must be of an exceptional nature and for a
short period (1hr max.) in order to avoid the risk of
overheating (recommendations from IGNES , the
Federation of the Digital Engineering, Energy and Safety
Industries).
iOn / PARTNER
C-ZERO / BERLINGO
SMART
C30
AMPERA*
MIA
i-MIEV
Green’up Access socket
Single-phase 14 A - 3.2 kW
Scooters,
quadricycles and
light-duty vehicles
up to 8 A
RENAULT
MODE 3
Dedicated line
with RCBO
30 mA
Single-phase
20 A
* Hybrid rechargeable
NISSAN
7h (2)
7 hours with Green'up Access
plug/socket pairing
12 hours with a different plug
MODE 3 READY
Sleeve pending a
communication cable
FLUENCE
KANGOO
ZOE
Safety contact
LEAF
Mode 3 vehicles are
mode 2 compatible (1)
Dedicated line
with RCBO
30 mA
Single-phase
20 A,
Three-phase 40 A
6h (2)
Single-phase
2h (2)
Control wire for off-peak
hours or clock signal
Green'up Premium terminal
Single-phase 3.7 kW
Three-phase 22 kW
Includes off-peak hours
management
Three-phase
MODE 3 COMMUNICATION
• Find the list of electric vehicles
and their cord type
• Discover the models fitted with
the Green'up Legrand plug
(2) Average time for a complete charge according to manufacturer sources, varies according to model
MODE 3
MODE 2
STANDARD
(1) Mode 2 cord available as an option from the manufacturer
CONVENTIONAL SOCKET
Remote charging
management from a My
Home screen, Smartphone,
digital tablet or PC
BUS/SCS
(My Home)
or IP protocol
GREEN'UP ACCESS SOCKET
Also fitted
with a Green'up
Access socket
GREEN'UP
B
PREMIUM TERMINAL
For occasional charging
For daily charging
For daily charging
Max. charge 1.8 kVA
Charging up to 3.2 kVA
Charging up to 22 kVA
Incomplete charge
Charge complete in approximately 7 hours
Charge complete in approximately 2 hours
No control wire for communication between
the vehicle and the electrical infrastructure
Control wire for communication between
the vehicle and the electrical infrastructure
Technical data sheet: F01399EN/01
Updated: Created on: 16/01/2013
1/5
Catalogue Number(s): 0 778 97/98 - 0 904 78
2P+E socket outlet - French standard
IP 55 - IK 10
25
h/
kW
8h
0 V~
/ 23
25
h/
kW
0 778 97
8h
0 V~
/ 23
0 778 98
1. USE
0 904 78
2. RANGE
I - Socket outlet, flush mounted, 3.2 kVA, modes 1 and 2, 2 P+E, 16 A,
230 V, Franco-Belgian standard with protective shutters.
- For daily charging in complete safety for electric vehicles supplied in
modes 1 and 2 (light-duty vehicles and first-generation vehicles).
- 2 P+E socket certified for all electric vehicles (mode 1 and mode 2), costeffective and safe. Fitted with optimised connection terminals, metal
contacts with silver surface treatment (5 µm). Fitted with Green’up
System, a Legrand technology.
- Patented Green’up System: The EV detects the secure Green’up Access
infrastructure and selects the maximum power that can be supplied via
the socket (reduced charging time).
- Suitable for use in residences and workplaces.
- Connected from the electrical panel via a dedicated line (1 line per socket) with protection via a 30 mA - 20 A RCBO.
BUS cable Cat. No. 0 492 31 can be used as an option for migrating to the
Green’Up Premium communication terminal (full mode 3 ready).
Description
Cat. No.
2P+E socket outlet with flap cover
Flush mounted - Supplied with bracket Cat. No. 0 904 78
0 778 97
2P+E socket outlet with lockable flap cover
Flush mounted - Supplied with bracket Cat. No. 0 904 78
Supplied with a set of 2 unique keys
0 778 98
Bracket with hooks
For suspending the control unit
0 904 78
3. POSITIONING
 3.1 Assembly
II - The SolirocTM IK10 range guarantees unfailing strength in areas at
risk or without surveillance (e.g. warehouses, public places, motorway
service areas, offices, shops, educational institutions, detention centres,
etc.).
Chrome-plated metal alloy faceplates that guarantee strength along
with high resistance to scratches, graffiti, tags and lighter flames. Plate
supplied with a set of 4 plugs.
The 5 commitments of the SOLIROC range
Safety: IK10 rating (20 joule impact energy) guarantees optimum resistance to impacts and to destruction attempts. SOLIROC cannot be dismantled as a result of the 4 zamak blanking plugs force-mounted on the plate
(dismantling possible by drilling only).
Reliability: The IP55 rating guarantees sustainable usage over time, both
indoors and outdoors. All of the external components are also made of
zamak for optimum strength.
Ergonomics: The plate's thickness is reduced, thereby limiting pull-out
risks. Minimum play between the components, guaranteed by the IP5X
rating (penetration by solid matter greater than 1 mm impossible and
dust resistance).
Installation: Dependent on the building type. We recommend using
multi-material or concrete BATIBOX boxes with 50 mm depth (40 mm
depth accepted).
To guarantee optimum tensile resistance:
- SOLIROC plates fixed with 4 standard screws (4 mm in diameter and
40 mm in length).
- Choice of plug in accordance with the building type. For concrete we
recommend a nylon extension plug (6 mm in diameter, useful length
35 mm).
Quality assurance: factory inspections in accordance with ISO 9001 procedures.
40
40
40
Technical data sheet: F01399EN/01
Updated:
mm
mm
mm
Created on: 16/01/2013
2/5
Catalogue Number(s): 0 778 97/98 - 0 904 78
2P+E socket outlet - French standard
IP 55 - IK 10
3. POSITIONING (continued)
3. POSITIONING (continued)
 3.1 Assembly
 3.1 Assembly (continued)
4
1
not supplied
2
Ø 4.5 mm
3
 3.2 Dismantling
Ø 4.5 mm
4 x 40 mm
Technical data sheet: F01399EN/01
Updated:
Created on: 16/01/2013
3/5
Catalogue Number(s): 0 778 97/98 - 0 904 78
2P+E socket outlet - French standard
IP 55 - IK 10
4. OVERALL DIMENSIONS (continued)
3. POSITIONING (continued)
 3.3 Installation recommendations
0 778 90
C
B
100 - 120 cm
A
MODE 1
0 904 78
C
E
100 - 120 cm
B
B
D
MODE 2
F
A
4. OVERALL DIMENSIONS
0 778 97
C
D
A
B
C
D
E
F
0 778 97
110
110
26
21
-
-
0 778 98
110
110
26
48
-
-
0 778 90
113
113
42
-
-
-
0 904 78
180
147.5
115
92.5
6
28
A
B
Cat. No.
B
C
D
A
0 778 98
Technical data sheet: F01399EN/01
Updated:
Created on: 16/01/2013
4/5
Catalogue Number(s): 0 778 97/98 - 0 904 78
2P+E socket outlet - French standard
IP 55 - IK 10
6. TECHNICAL CHARACTERISTICS (continued)
5. CONNECTION
 6.4 Electrical characteristics
Pillar terminals supplied open, with locked screws backed off
Min. capacity: 1 x 1.5 mm2
Max. capacity: 1 x 6 mm2 rigid or equivalent
Min. tightening torque: 0.8 Nm
Screwdriver: Flat, 3.5 to 5 mm
Phillips No. 1
Caution: Please ensure that your electricity supply contract allows
you to charge your electric vehicle.
Always unplug the socket before starting the vehicle.
Only the cords supplied with the vehicle are authorised for use with
the EV sockets.
Any use of extension cables or adapters is prohibited.
The EVSE unit must be mandatorily suspended.
Using a voltage surge protector is recommended.
 5.1 Wiring diagram (socket outlet only)
L
N
- Voltage: 250 V~
1) Socket performance when EV charging not in use
- 16 A - 2 P+E
- Frequency: 50/60 Hz
2) Socket performance when EV charging in use
- 25 kwh (230 V/8 hr)
C20 30 mA 20 A RCBO - type A or HPi
Cat. No. 4 107 54
-25
Hpi
Charging time:
Complete charge in approximately 7 hours (according to PSA source:
time provided for complete single-phase charging for a Peugeot iOn
or Citroën C-ZERO).
Wire cross-section 3 x 2.5 mm2
rigid or equivalent
50 m max.
7. MAINTENANCE
5 µm silver metal
contacts
Resistant to cleaning products without damage.
Products such as: hexane, methylated spirit, window-cleaning products,
bleach diluted to 10%, graffiti remover, acetone, white spirit, white gas.
8. ACCESSORIES
Min. tightening = 0.8 Nm
 8.1 Foam gaskets Cat. No. 0 778 85
1 gang
Material: EPDM (ethylene, propylene, diene, monomer).
Compensates for any significant flaws on the wall.
One single socket per dedicated line
 8.2 Blanking plug Cat. No. 0 778 96
Spare plugs supplied in packs of 4 and assembled in boxes with packs
and cartons of 10 boxes.
6. TECHNICAL CHARACTERISTICS
 6.1 Mechanical characteristics
Penetration by solid/liquid matter: IP 55
Protection index: IK 10 vandal-resistant
Maximum impact resistance. All the products are resistant to 20 joule
impact.
Maximum tensile resistance: Plate with curved shape to limit gripping.
 6.2 Materials
Plate: Zamak
Surface treatment: copper plating + acid treatment + matt nickel plating
+ chrome plating = thickness approximately 0.1 mm.
Colour: matt, chrome-plated grey look
Non-halogen material;
Self-extinguishing: + 850°C / 30 s for the insulating components holding
in place non-live parts.
+ 650°C for the other insulation material components.
 8.3 Bracket Cat. No. 0 904 78
Bracket with hooks
For suspending the control unit of the charging cord.
 8.4 Sealing accessory Cat. No. 0 778 83
 8.5 set of 2 unique "2A28" keys
Supplier DOM
9. STANDARD
NF EN 61-314 and the LCIE test programme
(8 hours of charging time at 14 A - 125 cycles).
 6.3 Climatic characteristics
Storage and use temperatures: -20°C to +40°C
Technical data sheet: F01399EN/01
Updated:
Created on: 16/01/2013
5/5