ZAO "PromServis"

ZAO ” PromServis” is a private enterprise that was founded by proficient
specialists in nuclear power engineering safety.
We manufacture in-house designed high quality devices that can compete
with the best analogs produced in Russia or in other countries.
ZAO ” PromServis” develops and produces:
up-to-date high-efficiency flow transducers, flowmeters for hot/cold water,
heating meters;
monitoring and testing systems for rotating equipment (pumps,
compressors, ventilators, reducers, rolling mill drives, separate bearing units,
etc.);
automated diagnostic, testing and control systems for compound objects
(water supply points, pumping stations, treatment plants, etc.) management.
ZAO ” PromServis” :
supplies equipment produced by ZAO “PromServis” and by other leading global
manufacturers;
 has partnership agreements and contractual relationships with dozens
of suppliers and customers in Russia, Ukraine, Kazakhstan, Denmark, Germany and
other countries.
our key customers are:
petroleum refineries, metallurgical works, chemical industry enterprises, water
and wastewater treatment plants, nuclear power stations and other nuclear
industry enterprises
ZAO “Promservis” has all corresponding permissions, licences and experience
to work in the following areas:
 industrial safety expert examination of technical devices, used at hazardous
productions; technical diagnostic, expert inspection and making a conclusion
about further running of the devices;
 project works, construction-and-assembling operations;
 design, assembly, engineering setup, warranty and post-warranty service of
energy carrier metering devices;
 energy inspection of facilities that produce and consume energy of all kinds;
 starting-up and adjustment of operation modes and safety devices at boiler
plants, heat power stations, etc.
Energy carrier metering devices
Electromagnetic vortex flowmeters
VEPS
warranty period – 4 years
designed for conversion of volume flow of water and other
ionic-conductive liquids in pipelines into electric
output signal (according to modification) and
providing information about consumption and
volume to external devices.
Nominal diameter (DN) of VEPS :
20; 25; 32; 40; 50; 80; 100; 150; 200; 250; 300 mm.
Flowmeters PRAMER-52хх
designed for measurement of volume flow and
total volume in one or two filled pipelines;
measurement of continuous operation period;
data backup in non-volatile memory;
indication of results and
data transmission to external devices.
Electromagnetic flowmeters
EMIR- PRAMER- 550
warranty period – 4 years
- wide dynamic range (1/1000),
- accuracy (±1% in the flow-rate range),
- a possibility to measure a reversible stream,
- flow meter self-diagnostic functions.
Electromagnetic flowmeters are designed for operation
under the following environmental conditions:
• temperature : from - 10 С to + 55 С;
• relative humidity: up to 95 % (at temperature +35С and lower
without moisture condensation)
• atmospheric pressure: from 84,0 to 106,7 kPa.
Flow transducer nominal diameters (DN): 15; 25; 32; 40; 50; 65; 80; 100, 150 mm.
Ultrasonic flowmeter
PRAMER – 510
This flowmeter refers to time-and-frequency
ultrasonic flowmeters. It operates using the
transit-time differential method, based on
difference of propagation time for ultrasonic
waves travelling down- and against the
stream.
PRAMER-510 allows to measure liquid
consumption in both directions of the flow
in pipelines with diameter up to 2000 mm.
Heat meters
designed on the basis of
flowmeters, produced by
ZAO “Promservis”
Energy saving
ZAO “PromServis” has been carrying out
energy inspections for more than 10
years.
The company has proficient staff,
required regulatory system, all
corresponding devices and equipment.
Every year our specialists examine
hundreds of houses, industrial
enterprises and government-financed
organizations. They take all required
measurements and make a conclusion
about energy usage efficiency.
Our main distinction is that we not
only develop guidelines for power
consumption economy and reduction
of heat losses we are ready to implement
the developed energy-efficient
project in actual practice.
ZAO "Promservis" has technical conditions, experience and all relevant licences
for assembly and startup-setup operations at oil industry and heat-power
engineering objects:
• design and survey works, design estimate works at heat- and flowmeters
assembly, disassembly, starting-up and adjustment;
• maintenance service of heat meters and flowmeters, instrumentation and automated
control systems, computing machinery and processing equipment;
• after-sale service of water and heat flow meters, automation devices, control and
measuring equipment;
• assembly, starting-up and adjustment of control and measuring instruments and
automatic control systems;
• assembly, starting-up, adjustment and maintenance of boiler equipment (heated with
gas or liquid fuel);
• reconstruction and retooling of thermal power plants and boiler equipment.
ZAO "PromServis" has a certified non-destructive testing laboratory and licences of
Federal Service for Environmental, Technological and Nuclear Supervision for:
1. Expert examination of industrial safety, technical diagnosis and examination of equipment
and conducting a conclusion about possibility/ impossibility of further operation of:
 lifting cranes, steam and hot-water boilers, steam and hot water pipeworks, equipment operating under pressure
more than 0,07 Pa;
 bulbs, reservoirs, industrial pipe-lines, pumps and compressors of hazardous chemical, oil refining, petrochemical,
gas industrial facilities and other industries that deal with
agressive and explosive substances;
 drilling and oil field equipment (drilling rigs, well
repair units, sucker rod pumping units, blowout equipment,
industrial pipe-lines, bulbs, reservoirs);
 gas equipment, boilers, processing lines, gas
burner units, hot water storage heaters and tankless
water heaters, pipelines and internal gas supply systems;
 integrated inspection of crane runways.
2. Defectoscopy of drilling and oil field equipment;
3. Duplicates of technical certificates;
4. Industrial safety expert examination
of design documents for construction,
expansion, reconstruction, technical
upgrade, mothballing and liquidation of
hazardous industrial facilities (boiler and
gas inspection)
Our key customers are:
Joint Stock Company “State Scientific Center – Research Institute of Atomic
Reactors” (JSC “SSC RIAR”)
JSC "Volzhskaya TDK (Territorial Generating Company)"
JSC "Dimitrovgradhimmash“(production of chemical engineering)
OJSC Rosneft (OOO "Ulyanovsk-Terminal", limited liability corporation)
OAO "Zavod KPD-2" (Ulyanovsk)
OAO "Zavod ZHBI-3" (Ulyanovsk), OAO "Zavod ZHBI-4" (Ulyanovsk)
LUKOIL (OAO LUKOIL- Nizhegorodnefteorgsintez, Nizhniy Novgorod)
JSC Russneft , OAO Ulyanovskneft (oil production and oil processing)
JSC Russian Railways, and others.
Automated control, monitoring and
vibration-based diagnostics systems
Control and testing systems, developed and produced by ZAO "PromServis", are
intended for control and testing of pump, compressor, ventilator units, turbines,
heat-exchange equipment, systems of radioactive substances cleanup, storage and
maintenance in the process of operation.
The key point of systems designed by "PromServis" is defining a condition of all
nods and components of a unit as a whole, i.e. taking into account their mutual
influence. This approach allows to detect existing malfunctions and predict their
development as well as to find out their source.
Our steady-state systems are based on hardware and software system "Sadko".
They are able to control nearly every combination and quantity of technological,
vibroacoustic and specific characteristics, detect current faults, maintain control
according to the algorithm of a customer
These systems are successfully
applied at Novokuibyshevskiy NPZ,
OAO SeverStal; Saratov, Ulyanovsk,
Vladimir, Omsk water and wastewater
treatment plants.
Portable testing systems “DIES“ series estimate real technical conditions of any
rotating equipment , have the following options:
predicting of the condition, balancing in its own bearings, repair and operation
control of the equipment under diagnosis.
“DIES” is applied, for example, at Joint Stock Company “State Scientific
Center – Research Institute of Atomic Reactors” (JSC “SSC RIAR”),
Kalinin atomic power station, Balakovo atomic power station.
In addition to testing systems we can supply
automated workstations for maintenance and
repair of all kinds of equipment, as we did for
OAO LUKOIL- Nizhegorodnefteorgsintez,
Nizhniy Novgorod.
The combination of available automatic control system with our testing and
control systems, automated workstations and software modules, linking our
systems with available automatic control system, can provide brand new
maintenance and repair management.
This system will automatically take into account real condition of the
equipment under testing and predict its condition, terms of routine
maintenance, availability of spare parts,
change of operation mode, etc.
Energy consumption dispatching system "Sadko-Teplo“ was designed on the basis
of software and hardware complex "Sadko“. It is a hardware and software system
intended for automated collection and processing of data received from
accounting devices (flowmeters, heat meters, electric meters, gas meters).
This system combines possibilities of centralized and distributed control.
Emergency information (flowmeter’s turning on/off , fire and security alarm
actuation) is transferred to the supervisory console, data link channel with a
secondary device becomes available for transmission of stored information that
can be used for the purpose of further cost accounting and operating efficiency
analysis.
Various versions of automated units BARS -02 for
linking and transmitting data were designed and
modified in the process of development and
improvement of the system.
Nowadays we produce BARS - 02 units with
Ethernet and GSM modules.
Traffic monitoring system is designed for data accumulation about
intensity of land transport passenger transportation by means of calculation of
doorway openings crossings by passengers. This calculation is executed with
help of infrared sensors.
The key principle of crossing detection is based on reflecting of sensors’
infrared rays. The sensors are installed at the top of vehicle’s doorway openings.
The following ways of data transmission to control station are possible:
- through GSM-900/1800 (GPRS) cellular channel;
- direct data transfer to the portable computer by means of wire connection
with recording device installed at a vehicle.
Software of the control station provides
- transmission of commands and data from
recording devices at each vehicle;
- data processing and storage;
- data visualization by means of user
interface.
user interface of software "POTOK- EXPRESS"
A block diagram of traffic monitoring system "POTOK"
At each passenger transport vehicle one set of the
following devices is to be installed:
1) recording device - automated unit for
registration and communication BARS -01-T
2) sensors LUCH-M / LUCH- MS one unit per each doorway opening
(not more than 80 cm wide);
Rosatom
Another area of our activity is cooperation
with the State Atomic Energy Corporation
ROSATOM.
The following licences were received:
• a licence for application of data that are
defined as state secret information
• a licence for nuclear-power plant operation
• a licence for design and production of
equipment for nuclear-power stations
Series of projects with implementation of equipment and automated
systems produced by ZAO "PromServis" were carried out at Joint Stock
Company “State Scientific Center – Research Institute of Atomic
Reactors” (JSC “SSC RIAR”),
at Beloyarskaya nuclear
power station,
Kalinin nuclear power station,
Balakovo nuclear power station.
ZAO “PromServis” address:
112, 50 let Oktyabrya st.
Dimitrovgrad, Ulyanovsk region
433502
Russian Federation
Global Business Department (Director Mr. Denis Bychkov)
Tel: +7 (84235) 4-30-02
Fax: +7 (84235) 4-58-32
e-mail: [email protected]
Visit us at www.promservis.ru