LAMCAM® VERSION 6 ANGLES 0° – 75°

LAMCAM® VERSION 6
ANGLES 0° – 75°
– Improved Footprint for Heeling Driver
– More Spring Return Options
– Higher Pressure for Stripping
— Aerial Cams
TABLE OF CONTENTS
Introduction.............................................2
General Information................................3
SlimCams – NLA Series Cams...............4
50 Series Cam........................................8
75 Series Cams....................................12
125 – 150 Series Cams........................16
175 – 200 Series Cams........................20
250 – 300 Series Cams........................24
Anchor Lamina has made a commitment to the metal
stamping industry by manufacturing and distributing
a comprehensive collection of high quality products.
Lamina has long been known for expertise in producing precision products and has applied that
knowledge into the design and production of cams.
LamCams maintain consistency throughout standard lines available from bump cams to Aerial and
Diemount cams. Wide cams (500mm – 1000 mm are
produced under the IEM brand.
Input from our customers has been and continues
to be an important part of cam development and
maintenance which assures Lamina’s leadership
position.
No other company surpasses our obligation to you,
our customer, in supporting cam products. We listen
to your needs and respond when you require our
assistance.
■■ Ease of spring replacement from back of cam; the cam base incorporates a safety restraint system to retain the slide during spring removal
■■ High quality materials used throughout, including high-strength steel castings for major components
■■ All wear areas are double-plated with self-lubricated wear plates to reduce maintenance and accommodate high production volumes
■■ Four Return Spring Kit Options are available: mechanical ISO spring, combination mechanical/nitrogen springs, nitrogen spring and higher force nitrogen
■■ Pentahedron design ensures smooth and stable slide movement on 125 through 300 Series Cams
■■ Urethane bumper cushion on slide return; optional hydraulic shock absorber available
■■ Mounting/locating provisions include both square keys and dowel holes
■■ Meets or exceeds all of “NAAMS” cam requirements
■■ Lockout kit installed, ready for cam installation and set up
■■ Safety backup provisions for retaining keeper plates
■■ Improved, super-duty accelerator system standard on 0° through 25° angles
■■ Dual external positive return system
2
SLIDE RETURN SYSTEM OPTIONS
Mechanical Spring
Mechanical & Nitrogen Spring*
Nitrogen Spring &
Higher Force Nitrogen Spring
Recognizing that different cam applications have different
requirements, Lamina offers four Return Spring Kit Options.
1.
2.
Mechanical – Employs a conventional ISO Die Spring,
used in cam applications where additional stripping force
is not required.
Combination Mechanical/Nitrogen – This unique Lamina
design employs an ISO Die Spring in series combination with
a Nitrogen Spring. This return system utilizes the mechanical
spring for preload, keeping the initial contact forces low,
while providing high final loads from the nitrogen spring for
part stripping
3.
Nitrogen – This return system provides high return spring
forces for stripping. By nature of the nitrogen spring, it also has
a higher initial contact force than other return spring options.
This higher contact force may result in greater wear on the
cam and its accelerator system (where applicable).
4.
Higher Force Nitrogen – Fits the standard gas spring
envelope, and delivers more force for stripping.
06
1.
The force developed in the slide return system is low when the
accelerator function is active (because only the mechanical
spring is operative at that point), thus, wearing of the accelerator
components is greatly reduced.
2.
The total developed slide return force at the cam’s shut
height position is greater with the Combination System than it
is with the Nitrogen-only option. The result is more on-board
capability for part stripping.
Optional shock absorbers are available
and should be used in the absence of
an accelerator system on low-angle
cams (i.e., less than 25°) to ensure a
gentle return of the slide to its home
position.
Optional
Shock
Absorber
Cam
Family
Face Generation
Width
(Series)
Work
Angle
(degrees)
The possible benefit of using the Combination System is
twofold:
OPTIONAL SHOCK ABSORBERS
PART NUMBER KEY
NAAMS Aerial
*Lamina also offers the Nitrogen Cylinder/Mechanical
Spring Combination System for the slide return function
of all Aerial and Diemount cam units.
Shock Absorber
3
SlimCam™ NLA Series cam
0° – 75° Aerial Cam
Aerial configuration offered
in 5° increments from 0° to
75° work angles.
4
SlimCam™ NLA Series cam
aerial cam dimensions and weights
CAM PART
NUMBER
CAM
ANGLE
WT.
(KG)
X1
X2
X3
X4
X5
X6
X7
Z1
NLA050006_
NLA050506_
NLA051006_
NLA051506_
NLA052006_
NLA052506_
NLA053006_
NLA053506_
NLA054006_
NLA054506_
NLA055006_
NLA055506_
NLA056006_
NLA056506_
NLA057006_
NLA057506_
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
20
20
20
18
18
18
18
18
18
18
18
18
18
18
32.5
33.8
102.6
104.9
105.9
101.8
107.0
109.4
102.9
107.6
92.9
93.7
93.4
93.7
89.4
93.7
89.4
89.4
238.6
235.4
231.4
223.9
224.8
224.7
218.9
217.4
202.7
199.8
198.1
193.5
191.0
186.1
182.4
182.1
136.0
130.5
125.5
122.1
117.8
115.3
116.0
109.8
109.8
106.1
104.7
99.8
101.6
92.4
93.0
92.7
122.0
110.0
102.0
89.0
81.0
75.0
60.0
53.0
37.0
35.0
28.8
20.0
18.0
6.0
-1.0
-8.0
155
155
155
155
155
155
155
155
155
155
155
155
155
58
65
65
150
150
150
150
150
150
150
150
150
150
150
150
150
48
55
55
70
70
60
60
60
70
70
70
70
70
70
70
70
82
35
35
120.0
118.2
127.0
126.7
126.7
127.7
124.1
130.9
131.2
136.7
139.8
145.9
148.5
160.7
162.6
177.1
Specify spring type (D, K, P, U)
SlimCamTM available with Nitrogen ONLY.
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
CAM DIAGRAM
Lamina has a ready-made LamCam™ for
nearly every cam application.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
34.5
34.6
35.0
35.7
36.7
38.0
39.8
42.1
45.0
48.8
53.6
67.9
77.9
33.3
41.2
56.0
28.9
31.9
35.0
38.2
41.5
45.0
48.8
53.1
57.9
63.4
70.0
78.2
90.0
35.3
43.8
58.0
45
45
45
45
45
45
45
45
45
45
45
45
45
15
15
15
5
SlimCam™ NLA Series cam
COMPONENT PARTS
5
11
13
12
10
4
8
6
15
7
10
2
3
1
9
14
Look on our website www.daytonlamina.com for our entire
line of ready-made Cams. Lamina also provides specials
and custom-made Cams.
6
SlimCam™ NLA Series cam
SLIMCAM™ NLA SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
DESCRIPTION
1
RH Positive Return Bracket
2
M8 x 1.25 x 16 SHCS
3
M8 x 1.25 x 25 SHCS
4
M8 x 1.25 x 80 SHCS
5
M10 x 1.5 x 25 SHCS
6
LHCS M8 x 1.25 x 16
7
LHCS M8 x 1.25 x 40
8
LH Positive Return Bracket
9
V-Block NLA/NLD 50 CAM
10
NLA Keeper Plate
11
25 x 25 x 50mm NAAMS Key
12
Lockout Spacer
13
Body
14
Driver
15
Slide
CAM SPECIFICATIONS – SlimCam
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
125mm
4kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
61kN
53kN
RETURN SPRING KIT OPTIONS NITROGEN ONLY FOR SLIMCAM
VENDOR
Dadco 0˚ – 60˚
Dadco 65˚ – 75˚
Dadco Ultra 0˚ – 60˚
Dadco Ultra 65˚ – 75˚
Kaller 0˚ – 60˚
Kaller 65˚ – 75˚
Kaller Powerline 0˚ – 60˚
Kaller Powerline 65˚ – 75˚
CAM #
SUFFIX
D
D
U
U
K
K
P
P
SPRING KIT
PART #
C.090.050
C.090.025
CLNA0050-0048
CLNA0050-0049
R19-050Y
R19-025Y
CLNA0050-0019
CLNA0050-0021
QTY
1
1
1
1
1
1
1
1
INITIAL
FINAL
LOAD (N) LOAD (N)
890
1109
890
1025
1700
2550
1700
2186
900
1161
900
1059
1700
2550
1700
2186
7
50mm (90mm WIDE FACE) Series AERIAL CAM
8
50mm (90mm WIDE FACE) Series AERIAL CAM
aerial cam dimensions and weights
CAM PART
NUMBER
CAM
ANGLE
WT.
(KG)
X1
X2
X3
NCA050006_
NCA050506_
NCA051006_
NCA051506_
NCA052006_
NCA052506_
NCA053006_
NCA053506_
NCA054006_
NCA054506_
NCA055006_
NCA055506_
NCA056006_
NCA056506_
NCA057006_
NCA057506_
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
29
29
29
33
32
33
33
34
33
33
32
32
32
40
39
38
111.37
108.97
116.47
132.16
121.07
125.47
124.17
131.07
119.86
115.56
104.66
114.54
96.64
119.86
115.56
104.66
267
267
278
297
288
297
297
307
297
298
288
297
288
297
298
288
280 106.9 190
280 87.6 190
290 87.3 190
310 92.3 200
300 63.7 200
310 63.3 200
310 55.0 160
320 54.3 160
310 36.8 154
310 39.4 142
300 21.9 131
310 34.1 128
300 14.5 123
310 9.4 122
310 -1.9 122
300 -6.2 102
X4
X5
X6
X7
X8
X9
Z1
247.37
239.43
242.34
254.60
238.77
241.43
235.77
240.34
226.12
221.89
203.98
217.27
198.56
197.10
189.66
168.78
136.00
130.46
125.87
122.40
117.70
115.96
111.60
109.27
106.26
106.33
99.32
102.69
101.92
77.20
74.06
64.07
180
180
180
190
190
190
81
85
65
50
50
50
50
50
50
50
157
84
71
70
72
76
47
52
35
72
77
82
77
77
80
72
117.96
118.40
125.21
125.49
126.87
126.15
131.71
131.69
135.53
136.45
144.32
143.86
148.29
173.73
171.98
176.90
Specify spring type
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
CAM DIAGRAM
Check out these die mount cams.
From 300mm to 50mm Standard Cams, SlimCamTM, and
RollerCam to our unique Bump Cams, Diemount modular
cams (500mm – 1200mm width) are not pictured.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
34.5
34.6
35.0
35.7
36.7
38.0
39.8
42.1
45.0
48.8
53.6
67.9
77.9
50.3
62.1
81.7
28.9
31.9
35.0
38.2
41.5
45.0
48.8
53.1
57.9
63.4
70.0
78.2
90.0
51.3
64.0
84.6
45
45
45
45
45
45
45
45
45
45
45
45
45
22
22
22
9
50mm (90mm WIDE FACE) Series AERIAL CAM
COMPONENT PARTS
7
11
11
22
12
4
19
24
10
9
3
4
21
5
18
16
4
17
2
15
1
23
8
7
4
3
4
23
6
14
13
20
10
Look on our website www.daytonlamina.com for our entire
line of ready-made Cams. Lamina also provides specials
and custom-made Cams.
50mm (90mm WIDE FACE) Series AERIAL CAM
50 SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
DESCRIPTION
ITEM
NUMBER
DESCRIPTION
1
RH Positive Return Bracket
13
Key 10 x 12.7 x 40mm
2
LH Positive Return Bracket
14
V-Block
3
Bronze Self Lube Bushing
15
Guide Pin
4
M8 x 1.25 x 16 SHCS
16
Spring Bracket
5
M8 x 1.25 x 100 SHCS
17
Disk Plate
6
M10 x 1.5 x 20 SHCS
18
Lockout Spacer x 59mm LG
7
M10 x 1.5 x 25 SHCS
19
Body
8
M12 x 1.75 x 25 SHCS
20
Driver
9
M8 x 45mm LG Soc Set Screw
21
Slide
10
M8 X 1.25 Jam Nut
22
12 x 80 x 160mm BRZ S/L WP
11
25 x 25 x 50mm NAAMS Key
23
12 x 40 x 122.5mm BRZ S/L WP
12
Bumper
24
12 x 80 x 145mm HD Steel WP
CAM SPECIFICATIONS – 50 Series Cam
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
125mm
7kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
174kN
152kN
RETURN SPRING KIT OPTIONS
VENDOR
Coil Spring 0˚ – 60˚
Dadco 0˚ – 60˚
Dadco 65˚ – 75˚
Dadco Ultra 0˚ – 60˚
Dadco Ultra 65˚ – 75˚
Dadco Coil/Nitrogen 0˚ – 60˚
Kaller 0˚ – 60˚
Kaller 65˚ – 75˚
Kaller Powerline 0˚ – 60˚
Kaller Powerline 65˚ – 75˚
Kaller Coil/Nitrogen 0˚ – 60˚
CAM #
SUFFIX
SPRING KIT
PART #
QTY
C
D
D
U
U
CD
K
K
P
P
CK
SKC050001
SKC050014
CLNA0050-0016
CLNA0050-0050
CLNA0050-0051
SKC050012
SKC050005
CLNA0050-0014
CLNA0050-0036
CLNA0050-0038
SKC050002
2
2
2
2
2
2
2
2
2
2
2
INITIAL
FINAL
LOAD (N) LOAD (N)
167
4000
4000
6400
6400
219
4000
4000
6400
6400
219
635
4933
5215
8773
9598
751
5272
5785
8926
9674
751
11
75mm Series (115 Wide Face) AERIAL CAM
12
75mm Series (115 Wide Face) AERIAL CAM
aerial cam dimensions and weights
CAM PART
NUMBER
NCA070006_
NCA070506_
NCA071006_
NCA071506_
NCA072006_
NCA072506_
NCA073006_
NCA073506_
NCA074006_
NCA074506_
NCA075006_
NCA075506_
NCA076006_
NCA076506_
NCA077006_
NCA077506_
CAM WT.
X1
X2
X3
X4
X5
X6
X7
X8
ANGLE (kg)
0
42 139.64 319.0 331.0 123.6 225.0 300.10 160.46 199.0
5
42 164.60 333.0 346.0 120.0 235.0 306.91 142.30 210.5
10
43 165.52 322.0 335.0 104.9 235.0 300.85 135.33 209.0
15
47 174.42 343.0 356.0 94.0 235.0 300.98 126.56 209.0
20
45 179.20 334.5 347.5 77.1 245.0 299.33 120.13 219.0
25
47 186.50 333.0 346.0 68.1 200.0 294.46 107.96 102.0
30
47 192.50 347.0 360.0 60.5 200.0 293.90 101.40 97.0
35
48 188.80 332.0 345.0 45.7 200.0 284.87 96.07 92.0
40
47 185.85 344.5 357.5 42.2 190.0 278.06 92.22 67.0
45
47 173.70 352.0 366.2 30.4 180.0 266.37 91.67 62.0
50
45 166.34 352.0 365.0 47.7 150.0 256.71 90.37 57.0
55
45 193.34 342.0 356.0 38.8 145.0 251.63 58.30 47.0
60
45 175.40 337.0 350.0 30.9 135.0 239.75 64.35 47.0
65
54 185.85 344.5 357.5 39.7 137.0 268.07 82.22 47.0
70
54 173.70 353.2 366.2 22.0 135.0 252.60 78.91 47.0
75
53 166.34 352.0 365.0
5.0
135.0 239.29 72.96 47.0
X9
X10
Z1
209.0
220.5
219.0
219.0
229.0
94.0
85.0
80.0
46.5
44.0
41.5
36.5
36.5
36.5
36.5
36.5
80
80
80
80
80
55
50
50
125
125
95
85
85
80
85
85
140.71
144.33
151.81
158.10
160.64
171.91
174.37
175.50
175.30
174.76
175.93
189.98
193.71
218.95
217.37
217.18
Specify spring type
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
CAM DIAGRAM
–– Diemount
Cams
Diemount Cams
www.anchorlamina.com
www.daytonlamina.com
Check our
Check
our website
websitefor
forthe
the
latest technical
technical information.
latest
Also look for Lamina
Die Mount Cams.
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
46.0
46.1
46.7
47.6
48.9
50.7
53.1
56.1
60.0
65.0
71.5
90.6
103.8
50.2
62.2
82.1
38.6
42.6
46.7
50.9
55.3
60.0
65.1
70.8
77.1
84.5
93.3
104.2
120.0
51.2
64.1
85.0
60
60
60
60
60
60
60
60
60
60
60
60
60
22
22
22
13
75mm Series (115 Wide Face) AERIAL CAM
COMPONENT PARTS
6
10
18
11
8
9
4
21
3
14
16
17
4
20
7
5
23
3
2
1
6
13
15
4
22
4
12
19
Look on our website www.daytonlamina.com for our entire
line of ready-made Cams. Lamina also provides specials
and custom-made Cams.
14
75mm Series (115 Wide Face) AERIAL CAM
75 SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
DESCRIPTION
ITEM
NUMBER
DESCRIPTION
1
RH Positive Return Bracket
13
V-Driver
2
LH Positive Return Bracket
14
Guide Pin
3
Bronze Bushing
15
Spring Bracket
4
M8 x 1.25 x 16 SHCS
16
Lockout Spacer
5
M8 x 1.25 x 110 SHCS
17
Disk Plate
6
M10 x 1.5 x 25 SHCS
18
Body
7
M12 x 1.75 x 25 SHCS
19
Driver
8
M8 x 40mm LG Soc. Set Screw
20
Slide
9
M8 x 1.25 Jam Nut
21
12 x 50 x 200mm BRZ S/L WP
10
25 x 25 x 50mm NAAMS Key
22
12 x 50 x 150mm BRZ S/L WP
11
Bumper
23
12 x 170 x 110mm HRD Steel WP
12
Key 10 x 12.7 x 40mm
CAM SPECIFICATIONS – 75 Series Cam
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
140mm
10kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
214kN
187kN
RETURN SPRING KIT OPTIONS
VENDOR
Coil Spring
Dadco 0˚ – 60˚
Dadco 65˚ – 75˚
Dadco Ultra 0˚ – 60˚
Dadco Ultra 65˚ – 75˚
Dadco Coil/Nitrogen 0˚ – 60˚
Kaller 0˚ – 60˚
Kaller 65˚ – 75˚
Kaller Powerline 0˚ – 60˚
Kaller Powerline 65˚ – 75˚
Kaller Coil/Nitrogen 0˚ – 60˚
CAM #
SUFFIX
SPRING KIT
PART #
QTY
C
D
D
U
U
CD
K
K
P
P
CK
SKC070001
SKC070014
CLNA0075-0010
CLNA0075-0023
CLNA0075-0024
SKC070012
SKC070005
CLNA0075-0009
CLNA0075-0014
CLNA0075-0016
SKC070002
2
2
2
2
2
2
2
2
2
2
2
INITIAL
FINAL
LOAD (N) LOAD (N)
372
4000
4000
6400
6400
412
4000
4000
6400
6400
412
2620
4933
5785
9106
9674
2824
5381
5785
9106
9674
2824
15
125 – 150mm Series (165/190 Wide Face) AERIAL CAM
16
125 – 150mm Series (165/190 Wide Face) AERIAL CAM
aerial cam dimensions
CAM
ANGLE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
X1
X2
X3
X4
X5
X6
X7
X8
X9
X10
X11
Z1
175.56
183.89
182.97
193.16
184.91
176.98
214.60
197.53
200.49
194.82
180.26
152.06
104.19
200.49
194.82
180.26
65
65
65
65
65
65
103
100
108
108
108
108
108
108
108
108
355
355
355
355
355
355
393
390
398
398
398
398
398
375
375
365
130
109.8
90.7
78.7
63.6
35.3
32.3
28.3
17.7
-5.5
-22
-31.8
-54.2
-48.6
-58.7
-72.5
229.5
237
231
231
222
227
254
229
223
228
224
214
214
162
157
156
339.41
342.06
328.77
331.03
316.10
299.40
333.04
312.18
311.71
302.35
288.16
276.39
260.95
256.14
244.53
228.34
163.83
158.09
145.77
137.79
131.13
122.35
118.38
114.58
111.14
107.45
107.81
124.25
120.68
55.57
49.63
48.00
5
3
-10
-13
-25
-34
5
-8
5
5
5
5
5
5
5
5
55
55
55
55
55
55
55
55
55
55
55
55
55
50
50
50
135
135
135
135
135
135
135
135
135
135
135
135
135
105
105
105
90
90
95
93
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
146.12
153.08
172.55
177.57
179.59
183.70
186.96
191.78
197.56
206.23
211.66
221.66
230.81
224.71
230.61
233.09
aerial cam
PART NUMBERS and weights
CAM PART
NUMBER
NCA120006_
NCA120506_
NCA121006_
NCA121506_
NCA122006_
NCA122506_
NCA123006_
NCA123506_
NCA124006_
NCA124506_
NCA125006_
NCA125506_
NCA126006_
NCA126506_
NCA127006_
NCA127506_
WT.
(kg)
80
78
80
82
81
80
82
81
82
84
87
85
92
83
83
86
CAM PART
NUMBER
NCA150006_
NCA150506_
NCA151006_
NCA151506_
NCA152006_
NCA152506_
NCA153006_
NCA153506_
NCA154006_
NCA154506_
NCA155006_
NCA155506_
NCA156006_
NCA156506_
NCA157006_
NCA157506_
WT. CAM
(kg) ANGLE
81
0
80
5
82
10
84
15
86
20
82
25
84
30
83
35
84
40
86
45
89
50
87
55
93
60
85
65
86
70
88
75
Specify spring type
CAM DIAGRAM
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
46.0
46.1
46.7
47.6
48.9
50.7
53.1
56.1
60.0
65.0
71.5
90.6
103.8
50.2
62.2
82.2
38.6
42.6
46.7
50.9
55.3
60.0
65.1
70.8
77.1
84.5
93.3
104.2
120.0
51.2
64.1
85.0
60
60
60
60
60
60
60
60
60
60
60
60
60
22
22
22
17
125 – 150mm Series (165/190 Wide Face) AERIAL CAM
COMPONENT PARTS
21
28
39
26
35
38
9
5
16
7
20
6
17
29
10
31
12
17
37
24
17
11
3
40
13
27
23
14
1
15
8
34
2
33
13
32
25
22
18
17
41
30
19
36
4
Look on our website www.daytonlamina.com for our entire
line of ready-made Cams. Lamina also provides specials
and custom-made Cams.
18
125 – 150mm Series (165/190 Wide Face) AERIAL CAM
125 – 150 SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
DESCRIPTION
Accelerator Ramp (0° – 25° only)
RH Positive Return Guideway
LH Positive Return Guideway
RH Positive Return Bracket
Lockout Spacer
Steel Wear Plate
Bronze S/L Wear Plate
RH Keeper Plate
LH Keeper Plate
Bronze S/L Wear Plate
Key 10 x 12.7 x 40mm (0° and 5° only)
Steel Wear Plate
M6 x 1.0 x 12 SHCS
M6 x 1.0 x 16 SHCS
M6 x 1.0 x 20 SHCS
M8 x 1.25 x 10 SHCS
M8 x 1.25 x 16 SHCS
M8 x 1.25 x 20 SHCS
M8 x 1.25 x 40 SHCS
M8 x 1.25 x 90 SHCS
M10 x 1.5 x 25 SHCS
ITEM
NUMBER
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
DESCRIPTION
M10 x 1.5 x 30 SHCS
M12 x 1.75 x 25 SHCS
M12 x 1.75 x 30 SHCS
M12 x 1.75 x 45 SHCS
M12 x 1.75 x 90 SHCS
M12 x 1.75 Hex Locknut
25 x 25 x 50mm NAAMS Key
Bumper
LH Positive Return Bracket
Disk Plate
Roller Shaft
Roller (0° – 25° only)
Spring Return Bracket
Body (Adapter)
Driver
Slide
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Steel Wear Plate
CAM SPECIFICATIONS - 125/150 Series
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
150mm
20kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
352kN
308kN
RETURN SPRING KIT OPTIONS
CAM #
SUFFIX
Coil Spring
C
Dadco 0˚ – 60˚
D
Dadco 65˚ – 75˚
D
Dadco Ultra 0˚ – 60˚
U
Dadco Ultra 65˚ – 75˚
U
Dadco Coil/Nitrogen 0˚ – 60˚
CD
Kaller 0˚ – 60˚
K
Kaller 65˚ – 75˚
K
Kaller Powerline 0˚ – 60˚
P
Kaller Powerline 65˚ – 75˚
P
Kaller Coil/Nitrogen 0˚ – 60˚
CK
VENDOR
SPRING KIT
PART #
SPG243811CAM
90.3.0300.080
90.3.0300.025
CLNA0125-0025
CLNA0125-0031
SKC120012
TU250-080Y
TU250-025Y
CLNA0125-0016
CLNA0125-0026
SKC120002
QTY
1
1
1
1
1
1
1
1
1
1
1
INITIAL
FINAL
LOAD (N) LOAD (N)
265
1559
3020
4010
3020
4010
4619
5932
4700
6355
432
3540
2650
3240
2650
3084
4700
6355
4700
5883
432
3403
19
175 – 200mm Series (235/260 Wide Face) AERIAL CAM
20
175 – 200mm Series (235/260 Wide Face) AERIAL CAM
aerial cam dimensions
CAM
ANGLE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
X1
X2
X3
X4
X5
X6
X7
X8
Z1
175.50
183.90
177.20
193.20
184.90
177.00
214.65
202.50
202.50
191.90
180.27
148.89
140.20
202.50
191.90
180.27
65
65
65
65
65
65
103
100
110
115
108
115
108
110
115
108
355
355
355
355
355
355
393
390
400
405
398
405
398
375
380
368
119.5
109.6
86.7
84.6
63.6
34.1
35.3
32.4
22.1
-6.4
-20.1
-33.3
-51.9
-79.6
-100.8
-108.2
230
237
231
231
222
226
254
229
223
228
224
214
213
194
194
183
336.45
339.10
323.79
331.05
316.15
299.44
333.07
317.21
313.72
299.36
288.15
273.19
260.96
253.14
237.54
224.70
160.95
155.20
146.59
137.85
131.25
122.44
118.42
114.71
111.22
107.46
107.88
124.30
120.76
50.64
45.64
44.43
5.0
3.0
-17.2
-11.0
-25.0
-36.0
5.0
-4.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
5.0
146.15
152.86
173.96
177.61
179.67
183.80
187.05
191.86
197.64
206.31
211.75
221.75
230.86
217.33
226.81
234.96
aerial cam
PART NUMBERS and weights
CAM PART
NUMBER
NCA170006_
NCA170506_
NCA171006_
NCA171506_
NCA172006_
NCA172506_
NCA173006_
NCA173506_
NCA174006_
NCA174506_
NCA175006_
NCA175506_
NCA176006_
NCA176506_
NCA177006_
NCA177506_
WT.
(kg)
113
112
112
114
113
111
114
112
115
117
120
118
124
114
115
120
CAM PART
NUMBER
NCA200006_
NCA200506_
NCA201006_
NCA201506_
NCA202006_
NCA202506_
NCA203006_
NCA203506_
NCA204006_
NCA204506_
NCA205006_
NCA205506_
NCA206006_
NCA206506_
NCA207006_
NCA207506_
WT. CAM
(kg) ANGLE
115
0
114
5
112
10
115
15
114
20
112
25
115
30
114
35
117
40
118
45
122
50
119
55
126
60
115
65
117
70
121
75
Specify spring type
CAM DIAGRAM
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
46.0
46.1
46.7
47.6
48.9
50.7
53.1
56.1
60.0
65.0
71.5
90.6
103.8
50.2
62.2
82.2
38.6
42.6
46.7
50.9
55.3
60.0
65.1
70.8
77.1
84.5
93.3
104.2
120.0
51.2
64.1
85.0
60
60
60
60
60
60
60
60
60
60
60
60
60
22
22
22
21
175 – 200mm Series (235/260 Wide Face) AERIAL CAM
COMPONENT PARTS
26
20
33
8
12
5
36
16
24
41
16
37
16
19
7
27
6
29
10
13
35
11
3
15
32
25
16
21
38
2
23
14
30
31
28
39
21
16
17
1
40
4
18
34
22
22
9
Look on our website
www.daytonlamina.com
for our entire line of
ready-made Cams.
Lamina also provides
specials and custommade Cams.
175 – 200mm Series (235/260 Wide Face) AERIAL CAM
175 – 200 SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
DESCRIPTION
Accelerator Ramp (0° – 25° only)
Positive Return Guideway RH
Positive Return Guideway LH
Positive Return Bracket RH
Steel Wear Plate
Bronze S/L Wear Plate
Lockout Spacer
Bronze S/L Wear Plate
Keeper Plate RH
Keeper Plate LH
Key
Steel Wear Plate
M6 x 1.0 x 12 SHCS
M6 x 1.0 x 16 SHCS
M6 x 1.0 x 20 SHCS
M8 x 1.25 x 16 SHCS
M8 x 1.25 x 20 SHCS
M8 x 1.25 x 40 SHCS
M8 x 1.25 x 90 SHCS
M10 x 1.5 x 25 SHCS
M12 x 1.75 x 25 SHCS
ITEM
NUMBER
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
DESCRIPTION
M12 x 1.75 x 30 SHCS
M12 x 1.75 x 45 SHCS
M12 x 1.75 x 90 SHCS
M12 x 1.75 Hex Locknut
25 x 25 x 50mm NAAMS Key
Bumper
Positive Return Bracket LH
Disk Plate
Roller Shaft (0° – 25° only)
Roller (0° – 25° only)
Spring Return Bracket
Body (Adapter)
Driver
Slide
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Steel Wear Plate
Steel Wear Plate
Bronze S/L Wear Plate
CAM SPECIFICATIONS - 175/200 Series
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
175mm
32kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
484kN
424kN
RETURN SPRING KIT OPTIONS
CAM #
SUFFIX
Coil Spring
C
Dadco 0˚ – 60˚
D
Dadco 65˚ – 75˚
D
Dadco Ultra 0˚ – 60˚
U
Dadco Ultra 65˚ – 75˚
U
Dadco Coil/Nitrogen 0˚ – 60˚
CD
Kaller 0˚ – 60˚
K
Kaller 65˚ – 75˚
K
Kaller Powerline 0˚ – 60˚
P
Kaller Powerline 65˚ – 75˚
P
Kaller Coil/Nitrogen 0˚ – 60˚
CK
VENDOR
SPRING KIT
PART #
SPG323911CAM
SKC170013
90.10.00500.025
CLNA0175-0030
CLNA0175-0031
SKC170012
SKC170003
TU500-25Y
CLNA0175-0020
CLNA0175-0028
SKC170002
QTY
1
1
1
1
1
1
1
1
1
1
1
INITIAL
FINAL
LOAD (N) LOAD (N)
402
2442
4710
5810
4710
5516
7360
10140
7360
9336
503
6903
4700
6056
4700
5597
7400
10386
7400
9511
503
4540
23
250 – 300mm (330/400 WIDE FACE) Series AERIAL CAM
X9
Ø 20 H7 (2) HOLES
(4) HOLES FOR 250 ONLY
40
FOR M20 SCREWS
(4) PLACES
90
CL
BASE
285
330
290
X2
X1 ± 0.025
X3
24
150MM – 25° ONLY
OPTIONAL DOWEL LOCATION
FOR ACCESS TO PULL DOWEL
250 – 300mm (330/400 WIDE FACE) Series AERIAL CAM
aerial cam dimensions
CAM
ANGLE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
X
X1
X2
X3
X4
X5
X6
X7
X8
X9
Z1
215
215
215
145
145
145
145
145
145
145
145
145
145
145
145
145
214.17
213.96
207.60
200.87
198.07
251.18
241.90
231.00
231.00
211.37
212.80
246.77
248.65
231.00
231.00
231.00
60
60
60
60
60
120
120
125
125
126
135
126
132
125
125
125
435
435
433
414
414
474
474
479
455
460
455
460
452
425
425
425
194.0
170.7
134.3
102.9
68.7
97.3
73.2
61.9
38.7
3.9
-3.7
-15.6
-36.2
-81.2
-108.0
-139.5
250
253
245
245
248
250
243
225
225
225
220
220
220
215
215
215
387.67
376.95
359.65
342.44
327.76
370.49
353.73
340.97
326.84
315.41
305.23
335.36
317.33
267.93
243.43
218.45
173.50
162.85
151.91
141.47
129.54
119.17
111.80
109.93
95.70
103.90
92.28
70.43
68.53
36.77
12.28
12.71
20
20
5
-20
-25
5
5
5
10
5
5
5
2
10
5
4
390
390
390
370
370
370
370
370
345
349
335
349
335
315
315
315
176.18
183.68
189.77
192.37
199.33
201.53
204.11
202.87
219.79
211.17
235.00
265.86
276.22
291.15
290.82
301.74
aerial cam
PART NUMBERS and weights
CAM PART
NUMBER
NCA250006_
NCA250506_
NCA251006_
NCA251506_
NCA252006_
NCA252506_
NCA253006_
NCA253506_
NCA254006_
NCA254506_
NCA255006_
NCA255506_
NCA256006_
NCA256506_
NCA257006_
NCA257506_
WT.
(kg)
218
210
206
199
199
200
198
197
199
201
218
221
223
231
234
238
CAM PART
NUMBER
NCA300006_
NCA300506_
NCA301006_
NCA301506_
NCA302006_
NCA302506_
NCA303006_
NCA303506_
NCA304006_
NCA304506_
NCA305006_
NCA305506_
NCA306006_
NCA306506_
NCA307006_
NCA307506_
WT.
(kg)
218
210
206
199
199
200
198
197
199
201
218
221
223
231
234
238
CAM
ANGLE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
Specify spring type
CAM DIAGRAM
CAM
PRESS
WORK
SLIDE
ANGLE STROKE STROKE STROKE
0
5
10
15
20
25
30
35
40
45
50
55
60
65
70
75
46.0
46.1
46.7
47.6
48.9
50.7
53.1
56.1
60.0
65.0
71.5
90.6
103.8
50.2
62.2
82.2
38.6
42.6
46.7
50.9
55.3
60.0
65.1
70.8
77.1
84.5
93.3
104.2
120.0
51.2
64.1
85.0
60
60
60
60
60
60
60
60
60
60
60
60
60
22
22
22
25
250 – 300mm (330/400 WIDE FACE) Series AERIAL CAM
COMPONENT PARTS
11
19
8
32
26
36
33
30
37
20
24
31
24
28
10
21
16
7
17
34
25
4
14
14
15
18
22
29
8
5
12
1
9
38
23
39
6
2
35
13
3
13
27
Look on our website www.daytonlamina.com for our entire
line of ready-made Cams. Lamina also provides specials
and custom-made Cams.
26
ITEM NO
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
250 – 300mm (330/400 WIDE FACE) Series AERIAL CAM
250 – 300 SERIES AERIAL CAMS
REPLACEMENT PARTS
ITEM
NUMBER
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
DESCRIPTION
Accelerator Ramp (0° – 25° only)
Driver Return Bracket RH
Driver Return Bracket LH
Positive Return Key – Slide LH
Positive Return Key – Slide RH
M6 x 1.0 x 16 SHCS
M6 x 1.0 x 30 SHCS
M8 x 1.25 x 16 SHCS
M8 x 1.25 x 20 SHCS
M8 x 1.25 x 100 SHCS
M10 x 1.5 x x25 SHCS
M10 x 1.5 x 35 SHCS
M10 x 1.5 x 50 SHCS
M12 x 1.75 x 30 SHCS
M12 x 1.75 x 45 SHCS
M12 x 1.75 x 110 SHCS
M16 x 2.0 x 50 SHCS
M12 x 1.75 Hex Locknut
25 x 25 x 50mm NAAMS Key
Lockout Spacer
ITEM
NUMBER
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
DESCRIPTION
Disk Plate
Roller Shaft (0° – 25° only)
Roller (0° – 25° only)
Keeper Plate
Spring Return Bracket
Body (Adapter)
Driver
Slide
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Bronze S/L Wear Plate
Steel Wear Plate
Steel Wear Plate
Steel Wear Plate
Steel Wear Plate
CAM SPECIFICATIONS - 250/300 Series
Tooling Allowance
Protrusion
Weight
Size & Weight
Parameters
200mm
65kg
Rated Capacity - kN
Cycles
300,000
1,000,000
Load Rating
651kN
558kN
RETURN SPRING KIT OPTIONS
CAM #
SUFFIX
Coil Spring
C
Dadco 0˚ – 60˚
D
Dadco 65˚ – 75˚
D
Dadco Ultra 0˚ – 60˚
U
Dadco Ultra 65˚ – 75˚
U
Dadco Coil/Nitrogen 0˚ – 60˚
CD
Kaller 0˚ – 60˚
K
Kaller 65˚ – 75˚
K
Kaller Powerline 0˚ – 60˚
P
Kaller Powerline 65˚ – 75˚
P
Kaller Coil/Nitrogen 0˚ – 60˚
CK
VENDOR
SPRING KIT
PART #
SPG404621CAM
SKC250013
CLNA0300-0016
CLNA0300-0017
CLNA0300-0018
SKC250012
SKC250003
CLNA0300-0013
CLNA0250-0009
CLNA0250-0015
SKC250002
QTY
1
1
1
1
1
1
1
1
1
1
1
INITIAL
FINAL
LOAD (N) LOAD (N)
471
4462
7400
10386
7400
9511
9240
13526
9240
11505
1108
7139
7400
10386
7400
9511
9200
12384
9200
11478
1108
7139
27
Commitment to Quality & Customer Satisfaction
Dayton Lamina is a leading manufacturer of tool, die and mold
components for the metal-working and plastics industries. As
a customer-focused, world-class supplier of choice, we provide
the brands, product breadth, distribution network and technical
support for all your metal forming needs.
Our goal is to give our customers the most innovative and valueadded products and services.
*
*Dayton Lamina’s line of Danly products is available only to North America.
www.daytonlamina.com
© 2015 Dayton Lamina Corporation. All rights reserved.
088
3/15