chest protectors - Troy Lee Designs

CHEST PROTECTORS
CHEST PROTECTORS
CP 5955
CP 5900
Congratulations on your Troy Lee Designs Premium
Protective gear purchase. Please take a few minutes
to read the following information before using
your protective gear.
SOLD AT FINER DEALERS WORLDWIDE
155 EAST RINCON ST CORONA, CA 92879
WWW.TROYLEEDESIGNS.COM
CP 5955
CHEST PROTECTOR
NECK BRACE INTEGRATION patent-pending design
is compatible with leading neck braces without
compromising fit and protection
VENT-TRAK circulates air through flexible channel over
the skin surface to cool the rider
VENTED SOFT-YOKE CONNECTION between front and back
plates offers unprecedented fit and comfort
•
OVER 50 CONFIGURATIONS adapt to rider preference for
custom fit and protection
•
LOW PROFILE DESIGN eliminates bulk to fit under or over
jersey
•
HINGED CHEST PLATES provide extended rib coverage,
better fit and maintains proper positioning in crash
situations
•
Covers the chest, ribs, back, clavicle. Convenient
strap locations and integrated fast-lock buckles for
easy function.
•
PATENT PENDING
SIZES/COLORS
BLACK
WHITE
YOUTH
ADULT M
ADULT L
ADULT M
ADULT L
CP 5900
CHEST PROTECTOR
NECK BRACE INTEGRATION patent-pending design
is compatible with leading neck braces without
compromising fit and protection
VENT-TRAK circulates air through flexible channel over
the skin surface to cool the rider
VENTED SOFT-YOKE CONNECTION between front and back
plates offers unprecedented fit and comfort
•
LOW PROFILE DESIGN eliminates bulk to fit under or over
jersey
•
HINGED CHEST PLATES provide extended rib coverage,
better fit and maintains proper positioning in crash
situations
•
Covers the chest, ribs, back, clavicle. Convenient
strap locations and integrated fast-lock buckles for
easy function.
•
PATENT PENDING
SIZES/COLORS
BLACK
ADULT M
ADULT L
WHITE
ADULT M
ADULT L
PROPER FITTING:
Measure your chest circumference near the under
arm and your height; it should fall into one of the
following size measurements:
CP 5955 & 5900
YOUTH
M
L
CHEST CIRCUMFERENCE
28”-32”
34”-38”
40”-45”
HEIGHT
4.0”-5.2”
5.0”-5.8”
5.6”-6.2”
The shoulders should not slide down your arms.
Straps on rib area and biceps are adjustable, so
make straps snug and make sure there are no
major gaps between the chest protector and your
upper body.
MATERIALS:
BODY: 82% Polyester 18% Spandex
INSIDE: 84% Nylon 16% Spandex
FRONT
5
4
4
6
5
1
6
DETACHABLE PIECES
FOR NECK BRACE,
CUSTOMIZATIONS AND
COMFORT
1- UPPER CHEST
2- CERVICAL (UPPER & LOWER)
3- LOWER BACK
4- CLAVICLE (FRONT & BACK)
5- SHOULDERS
6- BICEPS
7- BACK PLATE
CP 5955 WHITE
2
4
5
7
BACK
3
FRONT
2
2
2
2
DETACHABLE PIECES
FOR NECK BRACE,
CUSTOMIZATIONS
AND COMFORT
1- LOWER BACK
2- CLAVICLE
3- BACK PLATE
3
1
BACK
CP 5900 BLACK
CLEANING INSTRUCTIONS:
Hand wash cold, with similar colors. Do not dry clean
nor bleach. Drip dry. Do not clean your protective
gear with anything but soap and water. Do not use
any abrasive cleaners or pads. Do not use hot water or chemical cleaners (like glass cleaner) or any
solvents which contain petroleum based products like benzene or gasoline on your protective gear. Your protective gear can be weakened
by these substances and may not provide its
intended protection in an accident, which can result
in serious injury or death.
This product meets the CE standard
EN 14021
Tested by CRITT Sport Loisirs - Zone du Sanital
86100 Chatellerault - France - # 0501
!
WARNING!
Troy Lee Designs warranties all its products against defects in materials and workmanship for one year. Normal
wear and tear, negligence, or improper care during the
use of a product is not considered a defect. No warranty
or representation is made as to this product’s ability to
protect user from any injury or death. The user assumes
that risk. The Chest Protector only protects against stones
and other small projectiles. It is built to assist in absorption of light impacts and mild surface wounds. It must be
replaced after serious impact and should not be used if
there are any cracks or broken plastic or torn material.
Protective Gear is intended to minimize injuries, but it
does not guarantee complete protection against injury or
death.
NOTE: The life expectancy for Protective Gear is
two years from date of purchase without incident of
impact. Do not place gear in high heat and extreme cold
conditions. This will damage the product.
INTENDED USE: This Protective Gear has been designed and made for use by motorcyclists and bicyclists.
SOLD AT FINER DEALERS WORLDWIDE
155 EAST RINCON ST CORONA, CA 92879
WWW.TROYLEEDESIGNS.COM