Miniature Lumber Yard - Micro-Mark

Transcription

10-11 spring 2016 REV_Layout 1 3/3/16 11:45 AM Page 10
Miniature
Lumber Yard
#83557 Basswood Assortment
8 pieces each in 23 most popular
sizes from 1/32” to 1/4” for
building structures, railcar
loads, and hundreds of other
uses. 184 pieces, 12” long.
A $45.00 Value
Our Price $40.25
All Micro-Mark miniature lumber is clear, kiln-dried No.1 grade. Wood sheets are micro-sanded
both sides. Siding and moldings are precision milled and require no sanding. For cutting sheet
stock into narrow strips, we recommend Table Saw #50304 for thicknesses up to 1/4”. For sizes
thicker than 1/4”, and for plywood, use the MicroLux Tilting Arbor Table Saw, #80463.
BIRCH PLYWOOD
12” Wide x 24” Long
1st Quality Aircraft Grade,
Good 2 Sides
Price is PER PIECE
NEW!
50193
50194
50195
50196
50197
50198
50199
$18.60
$11.45
$11.65
$15.85
$20.95
$11.10
$13.05
MILLED BASSWOOD SIDING
3-1/2” Wide x 24” Long
x 1/16” Thick
Use for dollhouses,
model railroads, ship
models, architectural
models, dioramas
and more.
A
B
C
D
$16.40/pkg. of 3 pieces
Item #
Spacing
A. Clapboard
60796X3
1/32”
60797X3
1/16”
60798X3
3/32”
60799X3
1/8”
60800X3
3/16”
60801X3
1/4”
60802X3
3/8”
60803X3
1/2”
B. Corrugated Siding/Roof
60806X3
.040”
60807X3
1/16”
60808X3
3/32”
60809X3
1/8”
C. Scribed Sheathing
60810X3
.025”
60811X3
1/32”
60813X3
3/64”
60814X3
1/16”
60815X3
3/32”
60816X3
1/8”
60817X3
3/16”
60818X3
1/4”
60819X3
3/8”
60820X3
1/2”
D. Board & Batten
60821X3
1/16”
60822X3
3/32”
60823X3
1/8”
60824X3
3/16”
60825X3
1/4”
60826X3
3/8”
60827X3
1/2”
10
•
Duplicating Jig for
Cutting Strip and Tube Stock
Includes 10 each
of 1/8”, 3/16”, 1/4”
and 3/8” diameter
(9” long), plus 20 pieces
of 1/16” diameter (12” long).
#86409 Wood Dowel Assortment
(60 pieces…a $15.80 value!) Our Price $12.95
Thickness Item # Price ea.
1/64”
1/32”
1/16”
3/32”
1/8”
3/16”
1/4”
Hardwood Dowel
Value Pack
PRECISION MILLED BASSWOOD STRIPS
24” Long
Size
(Thick x Width) Item #
HARDWOOD SHEET
All 24” Long– Price is PER PIECE
Basswood – 4” Wide
Mahogany and Cherry – 3” Wide
Pieces Price/
Pkg. Pkg.
1/32” x 1/32”
1/32” x 1/16”
1/32” x 3/32”
1/32” x 1/8”
1/32” x 5/32”
1/32” x 3/16”
1/32” x 1/4”
1/32” x 5/16”
1/32” x 3/8”
1/32” x 1/2”
1/32” x 3/4”
1/32” x 1”
1/32” x 2”
80001
80002
80003
80004
80005
80006
80007
80008
80009
80010
80011
80012
80013
10
10
10
10
10
10
10
10
10
10
10
5
5
$5.75
$5.75
$6.65
$6.65
$7.50
$7.50
$9.20
$9.65
$13.15
$15.35
$15.45
$9.75
$15.90
1/16” x 1/16”
1/16” x 3/32”
1/16” x 1/8”
1/16” x 5/32”
1/16” x 3/16”
1/16” x 1/4”
1/16” x 5/16”
1/16” x 3/8”
1/16” x 1/2”
1/16” x 3/4”
1/16” x 1”
1/16” x 2”
80014
80015
80016
80017
80018
80019
80020
80021
80022
80023
80024
80025
10
10
10
10
10
10
10
10
10
10
5
5
$6.85
$6.85
$7.85
$8.30
$8.75
$10.95
$11.35
$14.40
$16.35
$19.95
$12.95
$18.10
3/32” x 3/32”
3/32” x 1/8”
3/32” x 5/32”
3/32” x 3/16”
3/32” x 1/4”
3/32” x 5/16”
3/32” x 3/8”
3/32” x 1/2”
3/32” x 3/4”
3/32” x 1”
3/32” x 2”
80026
80027
80028
80029
80030
80031
80032
80033
80034
80035
80036
10
10
10
10
10
10
10
10
10
5
5
$7.95
$7.95
$7.95
$9.20
$10.85
$13.10
$15.90
$17.70
$19.95
$13.50
$19.05
1/8” x 1/8”
1/8” x 5/32”
1/8” x 3/16”
1/8” x 1/4”
1/8” x 5/16”
1/8” x 3/8”
1/8” x 1/2”
1/8” x 3/4”
1/8” x 1”
1/8” x 2”
80037
80038
80039
80040
80041
80042
81287
81288
80045
81289
10
10
10
10
10
10
10
10
5
5
$8.05
$9.95
$10.40
$12.20
$13.20
$16.50
$20.90
$25.80
$14.35
$20.65
3/16” x 3/16”
3/16” x 1/4”
3/16” x 5/16”
3/16” x 3/8”
3/16” x 1/2”
3/16” x 3/4”
81290
81291
81292
81293
80051
80052
5
5
5
5
5
5
$6.75
$7.40
$8.45
$10.45
$11.95
$13.90
1/4” x 1/4”
1/4” x 5/16”
1/4” x 3/8”
1/4” x 1/2”
1/4” x 3/4”
1/4” x 1”
1/4” x 2”
80055
80056
80057
80058
80059
81294
81295
5
5
5
5
5
2
2
$8.75
$9.10
$11.15
$13.95
$14.25
$8.75
$11.35
3/8” x 3/8”
3/8” x 1/2”
80062
80063
5
5
$11.15
$11.85
1/2” x 1/2”
1/2” x 3/4”
81296
81297
2
2
$6.45
$6.95
ORDER TOLL FREE 1-800-225-1066
V-shaped groove in precision-machined
fixture holds stock while cutting with a razor
saw. Integral slot guides saw blade for perfectly
square cut. Sliding gauge locks in place for cutting
multiple pieces in lengths up to 3”. Works on any
shape stock up to 1/4” in any one dimension.
Bolt to bench or hold in vise.
Made of blackened steel.
(Razor saw not included.)
#84388 Duplicating Jig $28.95
Thickness
BASSWOOD
Item #
The Only Way to Get a Wood Dowel Under 1/16” Diameter
Price ea.
1/32”
1/16”
3/32”
1/8”
3/16”
1/4”
5/16”
3/8”
1/2”
3/4”
1”
2”
50101
50102
50103
50104
50105
50106
50107
50108
50109
50110
50111
50112
$4.15
$4.65
$4.95
$5.65
$6.25
$7.30
$8.95
$9.95
$11.50
$14.85
$15.65
$22.35
1/32”
1/16”
3/32”
1/8”
3/16”
1/4”
MAHOGANY
82263
82264
82265
82266
82267
82268
$6.05
$6.45
$6.85
$7.65
$8.85
$10.65
1/32”
1/16”
3/32”
1/8”
3/16”
1/4”
CHERRY
81673
81674
81675
81676
81677
81678
$6.05
$6.45
$6.85
$7.65
$8.85
$10.65
SHIP MODEL DECK SHEETS
3” x 22” x .050” Thick Price is PER PIECE
Individual basswood strips glued-up
with black glue to simulate caulking.
Very realistic and a great time saver.
Plank Width
Item #
Price ea.
1/16”
3/32”
1/8”
3/16”
60857
60858
60859
60860
$17.35
$14.50
$14.50
$14.50
BASSWOOD RAILROAD CAR
COMPONENTS IN HO AND O SCALE
Passenger
Clerestory Roof
Overhanging
Freight Roof
Refrigerator
Roof
Streamline
Floor
Freight Floor
See our web site
for our complete selection.
•
Dowels smaller than 1/16”
dia. are not available “off
the shelf,” so you can use
our Draw Plate to easily
make them yourself. The
hardened steel plate has
a series of sharp-edged tapered holes which range from approximately 3/32” diameter
down to .020”diameter. To make a small-diameter dowel, clamp the plate in a vise, then
draw a 1/16” round or square wood strip through the series of holes until the wood is
shaved to the diameter you need. Overall size: 5-1/2” x 1” x 3/32” thick.
#50330 Draw Plate . . . List $51.65 . . . Our Price $29.95
#50200X2 Hardwood Dowels – .085” dia. (1/16” nominal) x 12” long, 10 pieces. $7.40
Miter Master Makes
Clean, Sharp Miters
in Plastic and Wood
Angled anvil assures
square cuts
An excellent tool for ship modelers,
miniaturists, airplane modelers, model
railroaders and picture framers! Cuts
miniature molding, model railroad
timbers, dowels, plastic and wood
Beware
structural shapes, strip stock, ship model
planking, even full size picture frame
of cheap
molding, and it can also cut your
imitations!
assembly time in half. Razor sharp blade
cuts across the grain with a clean, smooth shaving action
and it’s as easy to use as a pair of scissors! Has left and
right hand, 45° miter fence and scored marks for lining
up stock for other angles. Precision made nickel-plated steel
handles and aluminum alloy anvil. Will cut stock up to 1/2”
thick x 1-1/2” wide. An industrial quality tool originally made
to cut automobile interior trim.
#50348 Miter Master $34.95 #50349 Extra Blade $16.25
Taskboard®…a Premium Quality Building Material
The Architect’s Choice
NEW!
Taskboard is an ultra-lightweight, rigid wood-fiberboard
that’s easy to cut with a knife
and especially good to cut
with a laser. Cut edges are
smooth and require minimal
sanding. Taskboard comes in a
#86552
flat sheet, but the 1/32” and
1/16” thicknesses can be easily formed into 3D shapes….just spray with water, form to
shape and hold until dry. White Taskboard has a finish that readily accepts glue and paint.
Each package contains 12 sheets, and is pre-cut 9-7/8” square to fit our LaserKnife 2525.
Available in 3 thicknesses: 1/32”, 1/16” and 1/8” (nominal).
#86549 1/32” nom. thick (.040” actual) $12.95/pkg. 3 or more $10.95/pkg.
#86552 Taskboard Assortment (4 sheets each of above thicknesses) $16.95/pkg.
3 or more $14.40/pkg.
30 DAY MONEY BACK GUARANTEE!
•
OUTSIDE USA CALL 1-908-464-2984
10-11 spring 2016 REV_Layout 1 3/7/16 10:43 AM Page 11
Chop-It Makes
Accurate
Miter Cuts
Easy
NEW !
Chop-It XL
Makes Precision Miter
Cuts in Long Strip Stock
15” extra-long base
with adjustable stop
lets you duplicate long
pieces with ease.
Handle may be
positioned in 2
different locations for
left- or right-hand use. Cuts material up to 3/32” thick.
Uses readily available single edge razor blades. Includes
pre-assembled base, aluminum handle, 2 cutting guides,
2 cutting guide clamps with thumbscrews, 2 razor blades and
4 non-slip rubber feet. #86288 Chop-It XL $35.50
#86414 NEW! Extra Handle for Chop-It XL Install this extra
handle in the unused location on your Chop-It XL to keep it
ready with two different set-ups. $11.95
One of the most useful tools for the hobbyist working in wood or
plastic strip material. Makes clean, neat, feather-free and accurate
cuts, easily and inexpensively. Uses readily available single edge
razor blades. Perfect miter cuts are a breeze with the 30˚, 45˚ and
60˚ guides included. An adjustable stop permits the exact duplication of pieces. Excellent for model ship planking, model railroad
structures, dollhouse furniture and molding plus hundreds of other
uses. Comes completely assembled with three extra blades. Base
is 7-1/2” x 7-1/2”. Cuts material up to 3/32” thick.
#84046 Chop-It $29.95
Sand-It Gives
Precision
Finish on
Small
Parts
Duplicate-It Cuts Parts to
the Exact Same Size
Press-It...A Precision Arbor
Press for Delicate Work
Use Press-It for press-fitting small parts
together and for removing gears and
wheels from axles. Use as a hole punch
with optional tooling sold below. Features
a reversible 3/8” ram that accepts interchangeable tooling. Includes press with
3/32” press tip, die bore plug, ram
thumbscrew, adjustable nylon gib and
instructions. Constructed of steel and
aluminum alloy. Base is 7” x 3”. Throat
depth is 4-1/4”. High quality; made in Asia.
#83539 Press-It Precision Arbor Press
List $103.95 . . . Our Price $78.95
Accessories for Press-It
High quality; made in Asia.
Sand-It is designed to give you a quick, precision finish on wood,
plastic and metal sheet and strip stock. Also works beautifully to
square-up cut ends of brass tubing. Use whenever you need a fine,
precise fit of parts, such as inlay work, marquetry, miniature window
framing, toys, dollhouse furniture and model structural components. Works on material up to 4” wide x 1” thick x any length.
Four-sided sanding block lets you have four different grits
mounted at the same time. Standard sandpaper is held to block
with tape or rubber cement. Includes pre-set angle guides for 30˚,
45˚, 60˚ and 90˚ plus protractor-type guide for any angle in between.
#84048 Sand-It $25.95
The Dobson Miter-Rite…
Designed for modelers working in sheet plastic, Duplicate-It works
just as well on thin wood sheets, card stock and paper up to 5/32”
thick. It squares the part, clamps it tightly while cutting and allows
you to make exact same-size duplicates easily. Use for structure
and rolling stock sides, window panes, etc. Accepts sheets up to
8” wide. Use with razor blades supplied or any hobbycraft knife.
#84047 Duplicate-It $26.95
Double-Edge Razor Blades…
with Ultra-FineSaw Teeth!
Special razor blades made just for model
builders have 70 teeth per edge and are only
#85853
.005” thick. You’ll get the finest, smoothest cuts
in plastic, resin and wood without leaving large gaps in the material. You can
even cut 1/32” off the end of brass tubing with ease. Double-edged for twice
the life. Package of 5 blades. #85853 Ultra Fine Saw Blades (5) $17.25
#86084 Ergonomically contoured Wood Handle for Ultra Fine Saw Blades
(#85853, sold separately) assembles in seconds and is comfortable to use.
Handle is 6-1/4” long overall. $9.95 3 or more $7.95 ea.
Precision in Miniature
Next to our powered Miter/Cut-Off machine, this is the
finest miniature tool you can buy for making perfect
angle cuts in wood, plastic and soft metal. Cuts are
adjustable in 1° increments with a range of 65° on each
side of 90°. Blade holder keeps blade absolutely perpendicular to the base, assuring straight and accurate cuts.
Made of tough “football helmet” Cycolac plastic for a
lifetime of use. Comes with one 54 tpi saw blade. Cuts
stock up to 5/8” thick x 2” wide x any length. Color may vary.
#15215 Dobson Miter-Rite
List $42.95 . . . Our Price $37.95
#22118X2 Replacement Blades (2) $9.95
World’s
Smallest
Miter Box?
#85852 Blades and
#86084 Handle sold separately
Our Micro Miter Box is sized exclusively for model builders working with microsize materials. Make the finest 30˚, 45˚ and 90˚ miter cuts you’ve ever seen in wood,
metal and plastic strips, rods and tubes up to .235” wide x any length! Excellent
for cutting brass tubing…especially very short pieces used for mast bands and
other items. Includes adjustable stop for making duplicate cuts quickly and
easily. Works best with our Ultra Smooth Saw Blades (#85853, sold separately).
Approx. 3-9/16” long x 5/8” wide x 3/16” high. #86085 Micro Miter Box $14.95
•
ORDER BY FAX 1-908-665-9383
•
#83708 9-piece Tooling Set for Press-It
includes 1/16” tip; bored cone for pointed
axles; 3/16” blank; oversize 1/2” O.D. tip;
center punch tip; and 1.5 mm, 2 mm, 3/32”
and 1/8” bored tips. $15.95
#83709 9-pc. Hole Punch Set for Press-It
includes one punch and one die in each of
the following inch sizes: 1/16, 5/64, 3/32,
and 1/8, plus adapter needed to mount
punch to bottom of ram. Note: Maximum
thickness for all hole punching is .020”
half-hard brass or equivalent.
List $66.95 . . . Our Price $44.75
#84424 V-plate for Press-It supports
wheels and gears during axle removal.
$3.75
Convert your Press-It and
Sensi-Press to a Sensitive
Drilling/Tapping Fixture
Special rotating
ram for Press-It
and Sensi-Press
holds taps
and drill bits
perfectly vertical
and eliminates
the misalignment,
cross-threading,
stripping and
breakage caused
by hand-held tap
holders and pin
vises. Includes
knob, ram, chuck,
chuck key and
instructions.
Installs in less than a minute.
#82878 Drill/Tap Holder
for Press-It and Sensi-Press
List $39.95 . . . Our Price $32.25
ORDER ONLINE www.micromark.com
•
11
12-13 spring 2016_Layout 1 3/3/16 11:55 AM Page 12
Band saws designed for cutting wood run too fast to cut metal, and plastic
comes away as a gooey mess. The electronic speed control on our professional quality band saw lets you dial-in the exact speed you need to cut these
materials. Make designs you never dreamed possible…cutting metal is so
smooth and fast you’ll complete your work in just 1/10th the time of other
methods. You can even stack workpieces to make exact duplicates in one
pass. And, with the optional diamond blade and cooling system sold below,
you can easily cut intricate designs in glass, tile and other hard materials.
Overall size (band saw only): 15” wide x 20” high x 11” deep; weighs 13 lbs.
Includes one .180” wide x .031” kerf x 14 tpi blade, adjustable ball bearing
blade guide and instructions. Made in Japan.
Variable Speed
Band Saw Cuts
Intricate Shapes
in Metal, Wood,
Plastic, Stone,
Tile, Glass
B
and More!
Steel Machinist’s
Squares…the
Ultimate in
Accuracy
A
Features:
• Sturdy cast-aluminum frame.
• Twin 6-3/8” dia. drive wheels
mounted in ball-bearings.
• 7-3/4” x 7-3/4” aluminum table tilts
between 0° to 45° for bevel cuts.
• 6” throat depth, 3” throat height.
• 425 to 650 ft/min variable blade speed.
• Cutting capacities: softwood 3”, hardwood 2”,
steel 3/8”, aluminum 3/4”, brass/copper 5/8”,
plastic 1-1/4”.
• High torque DC motor and moisture-sealed
electronics; plugs into standard 120v AC outlet.
• Adjustable miter gauge.
A. #82203 Variable Speed Band Saw
List $399.95 . . . Our Price $299.95
Use our web site shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call our order line for assistance.
Optional Accessories and Blades
B. #82211 Cooling System for Band Saw
Required when cutting stone, tile, ceramics, gems, minerals,
glass and other hard materials. Reservoir and adjustable valve
dispense water directly on the cut to lubricate and cool the
blade, preventing overheating and premature blade failure.
Unlike other water bath machines, ours won’t splash water all
over you and your workbench. Includes reservoir, valve, tubing,
gasket, 12” x 16” collection tray and hardware. $55.15
C.
D.
E.
F.
G.
H.
B
C
D
E
F
G
Variable Speed Mini Bench Grinder Includes Flex Shaft for Shaping, Drilling, Sanding and More
A unique power tool for the model maker and miniaturist.
Like most grinding machines, ours will shape, smooth
and deburr metal. It will also sharpen cutting tools and
renew the edges on screwdrivers, pliers, tweezers,
scribers and hundreds of other items. But, unlike other
grinders, ours includes a unique wheel made of woven
fibers impregnated with abrasive grains. So, it will
remove rust, paint and tarnish from most metals, as well.
The variable speed control, another unique feature, lets
you do intricate shaping of miniature parts. And, it
includes a detachable 42” long flexible shaft with
ergonomic handpiece and 1/8” collet to hold accessories
that grind, buff, sand, drill and saw metal, wood and
plastic. The all-metal motor housing with rubber feet
includes a repositionable face shield, which protects
eyes and skin from hot sparks. Overall size: 5” x 6” x 7”.
Wheels are 3” diameter x 3/4” wide with 10 mm hole.
Variable speed: 0 to 10,000 rpm. Easily portable…weighs
just 6-1/2 pounds. 120v AC motor with 5 foot cord.
#85287 Miniature Bench Grinder
List $92.50 . . . Our Price $74.95
Order Extra Wheels Below
#85919 3” Grinding Wheel, 120 Grit $9.65
#60736 3” Woven Abrasive Wheel $10.25
12
•
•
Toolmaker’s Angle Plate
Holds Your Work at a
Perfect 90° Angle
#82204 Blade .138” wide x .031” kerf x 14 tpi $24.75
#82209 Diamond Blade for cutting stone, tile, glass, etc. Must
be used with cooling set sold above (.125” wide x .025” kerf).
$129.95
Note: All toothed blades will cut steel, brass, copper, plastic and
wood. Blade selection is based on material hardness, cutting speed
and finish. Use coarse-toothed 14 tpi (teeth per inch) blades for fast,
aggressive cutting of thick or soft materials. Use fine-toothed 24 tpi
blades for smooth cuts in thin or hard materials. .138” wide blades
will cut curves down to 3/8” radius; .180” wide blades down to 3/4”
radius; .250” wide blades down to 1” radius. Wide blades are best for
straight cuts. Blade length: 41-7/8”.
H
You’ve never seen anything better for
marking a perfect 90 degree angle. Use
for marking metal, wood, plastic, etc.
Hard-to-find small sizes are a must for
dollhouse miniaturists and modelers. Also
excellent for setting up small table saws,
disk/belt sanders and other tools. Made of
fine quality, fully ground carbon steel.
#10117 3” Blade, 1-7/8” Beam $15.95
#10118 4” Blade, 2-1/2” Beam $19.50
#10119 5” Blade, 3” Beam $21.50
#83226 Set of 3. SAVE! $47.95
Use these hard-to-find tools whenever
you want to join or hold two parts edgeto-edge or edge-to-surface at a 90° angle.
Also used to square up table saw, drill
press or disk sander tables. Precision cast
with machined faces and edges.
#60713 1” x 1” x 1” $13.25
#20123 2” x 2” x 2” $21.25
#60626 3” x 3” x 3” $26.95
#60714 Set of Three (one of each size)
Save $6.00! $55.45
Combo
Combo Bench
Bench Block
Block
Interchangeable steel and nylon blocks fit
into an anti-slip rubber base that absorbs
shock…lets you hammer at your work
bench without creating excessive noise
and vibration. Steel and nylon blocks are
5/8” x 3” dia. Rubber base is 1” thick x 4” dia.
#85779 Combo Bench Block $27.15
See our web site for a video of this item in use
12-13 spring 2016_Layout 1 3/3/16 12:04 PM Page 13
B
A
H
Set includes
4 oz of
SAME STUFF
plus
TouchN-Flow
Applicator
K
J
The Best
Glue for
Windows!
Super Fine
Fine
G
Regular
F
E
D
C
A. Cyanoacrylates (CAs) – Instant Glues
that Cut Assembly Time from Hours to Minutes
Dries clear!
Does not
attack plastic!
L
F. Extra Applicator Caps for Micro-Mark CA Bottles
Quick Cure Zap (pink label) Thin consistency flows into the tightest joints and cures in
1–5 seconds. Can actually be applied after parts are clamped together. Penetrating action
acts as a sealer on wood. Bonds metal, plastic, wood, glass, jewelry. Includes applicator
bottle.
#80875 Zap CA 1 oz $8.69 #80876 Zap CA 2 oz $14.95
#85243 Micro-Mark Insta-Cure CA, 2 oz $9.95
Mid Cure Zap-A-Gap (green label) Best for general purpose construction and assembly.
Thicker consistency fills minor gaps and irregularities. Cures in 20 seconds. Preferred over
Quick Cure for bonding wood. Includes applicator bottle.
#80877 Zap-A-Gap 1 oz $8.69 #80878 Zap-A-Gap 2 oz $14.95
#85244 Micro-Mark Insta-Cure +, 2 oz $9.95
Replace worn or clogged caps to like-new condition. Fits most screw-on CA applicator
bottles. Package of 24. #85823 Applicator Caps $9.95
G. Microbrushes – Disposable Applicators
for Exact Placement of Paint, Glue and More
Use a Microbrush to apply a tiny amount of liquid adhesive, paint or lubricant exactly
where you want it without spilling, dripping or staining. Non-linting, non-absorbent.
Bendable handles. $11.35/pkg. of 100
#83168 Regular #83170 Fine #83172 Super Fine
H. Applicator Places a Fine Bead of Glue
on Your Woodworking Projects
Slow Cure Slo-Zap (yellow label) Extra thick consistency fills larger gaps and irregularities
and forms fillets on models. Slow, 90 second cure allows positioning time. Recommended
for laminating, sheeting and other large surface applications. Spreads easily. Preferred
for use on balsa, basswood and other porous woods.
#80879 Slo-Zap 1 oz applicator bottle $8.95
#80880 Slo-Zap 2 oz applicator bottle $15.95
#85245 Micro-Mark Maxi-Cure, 2 oz $10.95
Bellows type container with 1-3/8” stainless steel applicator places a fine bead of glue
exactly where you want it. Includes tight fitting cap that prevents glue from curing inside
container. Applicator snaps off for refilling. Choose from 1 oz and 2 oz sizes below. Pkg. of 2.
#60363 1 oz. Glue Applicators $7.35 #83514 2 oz. Glue Applicators $8.50
Zip Kicker Instant glue accelerator. After applying instant glue to the joint, give it a light
spray of Zip Kicker and the glue will set up instantly. Also excellent for bridging gaps in
bad fitting joints and for end grain gluing. Safe for plastics.
#83118 Zip Kicker 2 oz Spray $7.25 #80885 Zip Kicker 8 oz liquid $12.95
(Zip Kickers ship by ground to 48 contiguous U.S. only)
Add ballast, turf and grass to your layout or diorama, then apply our ready-to-use Scenery
Cement straight from the bottle to hold it in place. The included dispenser cap makes
application easy and fast. Dries invisible, but remains flexible. Water-based for easy cleanup.
#85043 Scenery and Ballast Cement (16 fluid oz) $8.75 2 or more $7.95 ea.
K. Liquid PSA* Eliminates the Glue Drips,
Runs and Smears That Ruin Model Surfaces
B. – C. Applicators Control Excess Glue
and Eliminate Accelerator Overspray
Capillary action can draw glue out of a dispensing bottle and cause it to run into
unwanted areas. Our applicators control excess glue by holding just a small amount at
the tip. Simply touch the tip to the object to transfer the glue. Also applies accelerator
without messy sprays and harmful vapors.
B. #81669 Mini Glue Applicator. Holds a single drop of glue or accelerator in the loop at
its tip. All Stainless steel. Approx. 6” long. $9.95
C. #82448 Micro Glue Applicator. Holds a miniscule drop of glue or accelerator in the
forked stainless steel tip. Nickel ferrule and wood handle. 7” long. $9.95
D. “Touch-N-Flow” Precision Applicator for Glue & Accelerator
The Touch-N-Flow Applicator lets you apply just the amount of liquid plastic (solvent
type) glue or C/A accelerator you need. How it works: Capillary action draws liquid into
the glass tube. Touching the micro-tip to the joint causes the liquid to flow from the
tube. Application is easily controlled and precisely positioned. Note: not for use with
cyanoacrylates or other thick glues. #81778 Touch-N-Flow Applicator $8.50
E. SAME STUFF…Liquid Plastic Welder
Formulated for the Plastic Modeler
Solvent-type cement uses capillary action to weld styrene, acrylic, butyrate and ABS
plastic. To apply, place the parts together and then put a drop on the seam with the
included Touch-N-Flow applicator (described above). Hold for 15 seconds. In that amount
of time, SAME STUFF bonds and starts to cure. This method is far superior to thicker plastic
cement which is messy, harder to control and can damage expensive model kits.
#84131 SAME STUFF with Touch-N-Flow Applicator . . . Value $20.40 . . . Our Price $17.50
#84113 SAME STUFF Refill (2 oz) $5.95
J. Ready-to-Use Scenery Cement
Holds Securely, Stays Flexible, Deadens Noise
•
Liquid PSA eliminates the drips and smears that occur when you assemble models with
intricate trim, window glazing and signs. Just apply a thin coat to the surface to be
joined. It will quickly dry and turn clear, but remains tacky. Then, simply press together.
Since the glue is dry, nothing oozes out to ruin the finish of an otherwise perfect model.
Parts go together quickly and are repositionable. Washes off with water until dry.
#84775 Liquid PSA (4 oz) $16.95 *Pressure Sensitive Adhesive
L. Watch Crystal Cement for Clear Contoured Plastic
Special cement dries crystal clear and won’t attack plastic, making it ideal for cementing
plastic canopies and windshields on airplane and car models. Special needle-point
applicator tip makes precise placement easy. Wire-in-cap keeps applicator free flowing.
Cures to the touch in 15 minutes; uncured cement cleans up easily with ordinary rubbing
alcohol. Two 1/3 oz tubes. Ships by ground to 48 contiguous U.S. only.
#80343 Crystal Cement $9.95
Probe Set for Micro-Miniature Manipulation
These surgical quality probes have
hundreds of uses for model makers,
miniaturists, electronic hobbyists,
jewelers, etc. Use them for gluing,
positioning, soldering, adjusting...
any type of miniature manipulation.
Excellent for hooking or unhooking tiny springs and ceramic detail work. Polished and
hardened stainless steel with needle-sharp points. 6” long overall.
#20124 5-piece Probe Set $18.35
ORDER BY FAX 1-908-665-9383
•
•
13
14-15 spring 2016_Layout 1 3/7/16 10:51 AM Page 14
MicroLux ® High-Precision Heavy-Duty Lathe
Micro-Mark again leads the way with the latest in high precision mini lathes. The MicroLux 7x16 Mini Lathe is not just a stretched version of older
7 x 10 and 7 x 12 mini lathes; our lathe has new design elements required for bigger jobs: • A more massive bedway to withstand extra forces
generated by turning long pieces • A more-powerful 500 watt motor • Carefully positioned controls for easy access and safety • A specially
configured and strengthened tailstock to accommodate long workpieces. Careful workmanship gives you high dimensional accuracy and long life.
Smooth operation lets you put fine finishes on turnings up to 7” diameter and 16” long. Yet, it’s compact enough (less than 100 pounds) to be
portable. Our mini lathe has true imperial (inch) feed screws and dials (.050 inch per turn), so metric conversions are not required. The MicroLux
Mini Lathe is so versatile, it will cut all metals, including carbon steel, stainless steel, cast iron, aluminum, brass, copper, bronze, and nickel-silver,
plus non-metals such as wood and plastic. And, with the optional accessories sold separately, it will perform virtually any task you’ll ever need.
The MicroLux 7x16 Mini Lathe
• 16” capacity
• Powerful 500w brushless motor
•Quiet belt drive
A MicroLux
Mini Lathe Exclusive!
Zero-resettable
hand wheels with
True-Inch divisions
(.050” per turn)
Cam-Locking Tailstock
makes repositioning
the tailstock quick
and easy, eliminating
tedious use of a
wrench on the
tailstock lock bolt.
#84631 MicroLux 7 x16 Lathe includes 500 watt
variable-speed brushless motor with ultra-quiet belt-driven spindle, 3-jaw
self-centering chuck (see our #82512 on page 15 for specs.) with inside/outside jaws
and wrench, compound slide with 5/8” capacity four-position tool post and chip deflector,
MT2 dead center for tailstock, carriage power feed with change-gear set for threading, thread
position indicator, splash guard, chip tray, tool set and instruction manual/parts diagram. $894.95
#84692 Digital Speed Readout for
7 x16 Lathe includes magnetic base.
Plugs into control panel to display
spindle speed in RPM. $139.95
The Micro-Mark Difference...
• True-Inch dials
• Heavy duty bedway
• Cam-lock tailstock
• Full technical support
• Easy-to-read manual
• Packed in sub-assemblies for safe,
easy transport
• No messy red goop to clean off!
MicroLux Lathe Specifications
Max. swing over bed: 7” diameter
Max. swing over carriage: 4.5” dia.
Distance between centers: 16”
Main spindle speeds:
Continuously variable
between 0 and 2,500 rpm
Spindle bore: .787” diameter
Main spindle taper: MT3
Carriage cross-feed travel: 2.560”
Just Look at These Features!
Compound slide travel: 2.165”
Tail spindle travel: 2.125”
Tail spindle taper: MT2
Motor: 500 watt (0.67 hp) brushless DC
(operates from standard 120v AC wall outlet)
Thread cutting: 12 to 52 tpi in 18 steps
Overall size: 12.75” high x 12” deep x 38” long
Weight: 86 lbs.
(basic machine, no accessories)
• Super rigid, heat-treated cast-iron bed with
precision-ground V-ways
• Hardened and accurately finished main spindle supported
by centripetal ball bearings
• Carriage power feed
• Powerful adjustable-speed DC motor and reversing switch for
bi-directional automatic feed and thread cutting
• Zero-resettable hand wheels with inch divisions
(.050 inch per turn) eliminate tedious metric conversions
• Four-position tool post makes tool changes fast and easy
Get the Most Out of Your New Mini Lathe with these Essential Accessories and Attachments
#82509
Live Center
#82503 Steady Rest
#82504 Follower Rest
#82284 Center
Drill Set
#82505 4-Jaw
Independent
Chuck
#82507
Tailstock
Chuck
#82506 Quick
Change Tool Post
#83039
Digital
Readout Set
See pages 15 – 16
for full descriptions
14
•
#82501
Cutter Set
•
#82502
Face Plate
#82766
Cut-Off Tool
•
Accessories for MicroLux 7x16 Lathe
Accessories also fit many 7x10, 7x12 and 7x14 mini lathes, and other machines. Check tool holder capacity and shank size before ordering. User provides mounting hardware.
A. #83039 DIGITAL READOUT FOR 7 x 10, 7 x 12, 7 x 14 AND 7 x 16 MINI LATHES
INDICATES BOTH INCHES AND MILLIMETERS All the parts you need to equip a mini
lathe with an accurate digital readout that displays inches and millimeters. Includes
on/off, rezero, and inch/mm buttons. Resolution: .0001”. $199.95
B. #82734 MILLING ATTACHMENT FOR MINI LATHE bolts to top of cross slide of 7x10,
7 x 12, 7 x 14 and 7 x 16 mini lathes to hold stock while milling with a cutter mounted
in the headstock. Moves 3-1/2” vertically. Rotates on the cross slide pivot. Tilts up to
50° left or right of vertical. Heavy duty 2-5/8” wide vise holds workpieces up to 2” high. 16 tpi lead screw. Includes adjustable gibs and lock
lever. Made of cast iron and steel with molded handwheel. $217.95*
B
A
Includes 2
display units
C. #82503 STEADY REST clamps onto bed to support long stock. $48.45
C
D. #82504 FOLLOWER REST bolts to carriage. Follows behind cutting tool to prevent
deflection of thin stock. Color may vary. $42.10
E
D
E. #82505 4-JAW INDEPENDENT CHUCK allows turning off-center or holding irregular
parts. Body dia. = 3.150”. Internal jaws clamping range = .196 to 1.378”. External jaws
clamping range = 1.378 to 3.150”. Approx. 7/8” dia. thru-hole. $86.95
F. #83371 SELF-CENTERING 4-JAW CHUCK with 5/8” dia. bore. Body dia. = 3.150”.
Internal jaws clamping range = .079 to .866”. Internal jaws jamming range = .984 to
2.756”. External jaws clamping range = .866 to 2.480”. Includes internal and external jaws,
plus key. $122.75
F
G. #82512 3-JAW SELF-CENTERING CHUCK Body dia. = 3.150”. Internal jaws clamping
range = .079 to .866”. Internal jaws jamming range = .984 to 2.756”. External jaws
clamping range = .866 to 2.480”. Approx. 5/8” dia. thru-hole. $110.60
G
H. #83266 LARGER CAPACITY SELF-CENTERING 3-JAW CHUCK with 7/8” dia. bore
allows full use of hole through MicroLux Lathe spindle. Body dia. = 3.937”. Internal
jaws clamping range = .078 to 1.181”. Internal jaws jamming range = 1.181 to 3.543”.
External jaws clamping range = 1.181 to 3.150”. $152.75
J. #82506 QUICK CHANGE TOOL POST Mounting base with dovetail lock and three
adjustable holders (3/8” capacity) let you preset tool bits to the perfect cutting height
without shimming. Makes tool bit changes quick and easy. $94.75
#82574 Extra Tool Holders (Set of 3) $55.80
H
J
K. #82284 CENTER DRILL SET Drills properly contoured holes so workpiece can be
mounted between centers. Four-piece set includes nos. 1, 2, 3 and 4. $18.95
L. #82507 TAILSTOCK CHUCK MT2 shank. Holds drills 1/32” to 1/2” diameter. Includes
key. $44.20
M. #82689 ROCKER TOOL POST lets you adjust position of tool bit to exact center of
workpiece without shimming. Compensates for worn or resharpened cutting tools.
Double-sided to hold two bits. Indexes on compound rest. 5/8” capacity. $38.45
N. #82502 FACE PLATE bolts to headstock spindle using bolts from 3-jaw chuck. 6-1/4”
diameter. $31.55
K
L
M
N
P. #82766 JUMBO CUT-OFF TOOL AND HOLDER Super sharp 1/2” high blade for heavy
duty cutting-off of large diameter stock. 3/8” tool holder with black oxide finish fits
lathe tool post. Blade is 4-1/2” long x 3/32” wide. Note: Must be used with #82506 Quick Change Tool Post.
$22.95
#82767 EXTRA 1/2” CUT-OFF BLADE $12.60
P
Q. #82511 CUTTER SET includes 3 double ended tool bits for turning, facing, threading
and parting, adapter for 6 mm (.236”) square tool bits, and angled holder for 4.8 mm
x 8 mm (3/16” x 5/16”) rectangular bits. $83.25
R
R. #82883 GRINDER ATTACHMENT FOR MINI LATHE bolts to top of cross slide of 7x10,
7x12, 7x14 and 7x16 lathes to grind stock smooth while turning in the headstock. 1/3 hp
motor turns grinding wheels 6,000 rpm; plugs into 120v AC wall outlet. Includes two
3-1/8” dia. x 3/8” wide grinding wheels: one for tool bits, one for workpieces. $158.20*
Replacement Grinding Wheels
#82961 For workpieces (pink, 60/80 grit) $16.85
#82962 For tool bits (green, 60/80 grit) $18.15
Q
S. #82501 CARBIDE CUTTERS 11-piece set with 5/16” square shanks $52.65
S
*Use our web site shopping cart to calculate freight charge for shipments outside 48 contiguous U.S., or call
our order line for assistance.
•
ORDER BY FAX 1-908-665-9383
•
•
15
Accessories for Lathes, Milling Machines and Other Machine Tools
Check tool holder capacity and shank size before ordering
A Micro-Mark Exclusive!
#84833 RADIUS TURNING TOOL cuts a
ball-shaped end or turns a radius on the end
of a workpiece. It’s simple to use: mount the
3/8” square shank of the outer frame in your
lathe’s tool post. Then, swing the handle to
rotate the cutting tool bit in a smooth arc.
Use for making universal couplings, decorative ball-ends on handles, and much, much
more. Cuts ball-shapes up to 3/4” diameter.
Includes high speed steel tool bit. Made of
sturdy, corrosion-resistant blackened steel.
List $87.50
Our Price $72.10 Now Only $49.95!
#84834X2 Extra Tool Bits (pkg. of 2) $6.50
#82746
TAILSTOCK CHUCK MT1 shank.
Holds drills 1/32” to 3/8” dia. $38.45
/
/
Now Only $19.95!
Use the Radius Tool
to make these shapes:
#82743 MINI CUT-OFF AND
BORING BAR SET includes
extra-sharp 1/16” wide
x 3/8” high HSS cutoff blade with 3/8”
holder, plus 3/8”
diameter carbidetipped boring tool bit (makes
cuts inside a cylinder) and 1/2” square
holder. Note: Mini Cut-Off holder fits #82689
Rocker Tool Post (sold separately) and standard tool post provided with our #84631 7x16
Lathe. Not for use with #82506 Quick Change
Tool Post. $42.20
#82783 EXTRA CUT-OFF BLADE $9.15
#82784 EXTRA BORING TOOL BIT $12.25
#82753
MICRO
CUT-OFF TOOL
HOLDER WITH BLADE
includes 1/16” wide x 3/16” high x 2-1/2”
long pre-sharpened HSS cut-off blade and
hex wrench. 5/16” square shank. Black
oxide finish. 3” long. $11.85
#82754 EXTRA CUT-OFF BLADE $7.15
#82757 EIGHT-PIECE HSS MINI TOOL BIT
SET includes 8 different pre-shaped highspeed steel 1/4” square shank lathe tool bits
that turn, thread, groove, bore and cut-off.
2-1/2” long. $41.15
#82745 LIVE (BALL BEARING/
ROLLING) CENTER
MT1 shank.
$27.95
#82509 LIVE
(BALL BEARING)
CENTER
MT2 shank.
$20.30
Live
Center with
Interchangeable Tips
Ball bearing-equipped mandrel with MT2
shank installs in lathe tailstock. Rotates
with the workpiece while supporting it
during turning operations. Includes 7
interchangeable tips – 5 point centers in
4 sizes for center-drilled shafts, a cup
center for pointed shafts or small diameter
rods, and a cone for pipe – plus knock out
pin and beautifully finished compartmented wood storage box.
#83185 MT2 Live Center Set with 7 tips
$131.35 Now Only $99.95!
/
#82570 TOOL REST & SPUR DRIVER FOR
LATHE Tool rest mounts to tool post for
use with wood turning tools. Includes
MT3 spur driver for headstock. $58.95
/
Now Only $39.95!
#83164 ROTATING TAILSTOCK CHUCK
Live 3-jaw Tailstock Chuck rotates on smooth,
sealed bearing to support small diameter
stock while turning in the lathe. Use when
there is insufficient room for follower rest.
Works great for truing armatures and flywheels mounted on small diameter motor
shafts. MT2 shank. Includes chuck key. 1/2”
capacity. $79.10 Now Only $49.95!
/
BUY ONE…GET ONE FREE!
#31111X2 HIGH SPEED TOOL BLANK,
1/4” SQUARE for making your
own turning tools. 2.5”
long. Set of 2. $8.50
#85198 Mini Lathe Tool Set
includes a straight, left
and right tool holder,
each with a 1/8”
HSS bit; boring
bar with
1/8” tool bit;
5/16” and 3/8”
cut-off holders with
HSS blades; double-ended knurling tool; and pivot-head knurling tool, plus 6 hex keys.
Fits Mini and Micro Lathes. $61.75
Machine Tool Stand
Supports machines
weighing up to 400
lbs. at a comfortable
working height of 35”.
Adjustable feet
provide stability on
uneven floors. 14” x
31” composite wood
top with honey-color
veneer includes pull
out shelf for holding
tools while you work.
Frame and legs
have baked-on
rust-resistant black
powder coat. No
lightweight…this
stand weighs a hefty
29 lbs. Shipped unassembled.
#83291 Machine Stand (machines not included) $115.85
Use our web site shopping cart to calculate freight charge for
shipments outside 48 contiguous U.S., or call our order line for assistance.
High-Precision Miniature
Digital Level Measures Exact Angles
of Machine Tool Set Ups
#82761 EIGHT-PIECE HSS MICRO TOOL
BIT SET Includes 8 different pre-shaped
high-speed steel 1/8” square shank lathe
tool bits that turn, thread, groove, bore and
cut-off. 2-3/8” long. $38.95
16
•
Carpenter levels are just too large and inaccurate for machine
set-up. So, we encased our high precision digital level in a
compact housing that’s only 2” square by 1” deep. At the press
of a button, the large LCD reads the relative angle between
machine surfaces or the percent grade from sea level.
Embedded magnets attach it securely to cast-iron/steel
surfaces for hands-free measurement. Range: 0 to 45˚/100%.
Readability: 0.05˚/0.01%. Hold button remembers last reading.
Housing made from durable CNC-machined, satin-finish alloy.
Includes 9v battery and auto shut-off battery saver.
#84519 Digital Level $43.95
#82771 DIAMOND PATTERN KNURLING
TOOL Raises a series of crossed, angled
ridges in a diamond pattern on shaft
or workpiece to make decorative finish
or slip-proof grip. Pivoting head assures
equal pressure of both wheels on workpiece. Dual 3/4” dia. x 5/16” wide wheels;
1/2” square x 4” long black oxide steel
shank. $19.50
•
•
5!
• R8 spindle
• Powerful 500w
brushless motor
• Quiet belt drive
MicroLux® High-Precision Heavy-Duty Miniature Milling Machine
The feature-packed design and robust construction of the MicroLux Milling Machine makes it
well-suited for your most demanding projects. Its smooth operation lets you put fine finishes
not only on machinable metals, but on non-metals like wood and plastic as well. For operating
convenience, we’ve equipped it with .050 inch-per-turn table feed screws and dials, and the
headstock is lever-actuated to make drilling operations a breeze. The column can also be tilted
for angled milling and drilling, and easily separates from the base for one-man relocation or
storage. A MicroLux Milling Machine is the perfect companion for your MicroLux Lathe...
it’s also backed by Micro-Mark’s guarantee of hassle-free product service.
The Micro-Mark Difference...
• True-Inch dials
• Full technical support
• Easy-to-read manual
• Packed in sub-assemblies
for safe, easy transport
• No messy red goop to clean off
JUST LOOK AT THESE FEATURES:
• Super rigid, heat-treated cast-iron base,
• .050” per turn table feed screws with
column and headstock with precisionzero-resettable dials
ground V-ways
• Powerful adjustable-speed motor
• Hardened and accurately finished main
spindle supported by high precision
centripetal roller bearings
• Tilting column for angle milling/drilling
with feedback-sensing power boost
circuitry
• Lever-actuated spring-assisted headstock
performs drilling operations with ease
Column tilts
up to 45° for
angled
milling
and drilling
.050” per turn feed screws
have zero-resettable dials
Adjustable-speed motor
with power boost circuitry
Lever-actuated headstock
makes drilling easy...
Micrometer-downfeed spindle
makes milling precise
#84630 R8 Milling Machine includes variable-speed 500 watt (2/3 hp) brushless motor with ultra-quiet
belt-driven spindle, 1/2” drill chuck and drawbar, table locks, column lock and drill stop, power supply
with feedback-sensing power boost circuitry, spring-assisted headstock return, V-way chip guards, chuck/
collet chip guard, indicator scales for the X and Z directions, fine-adjust knob for the Z direction, safety
cut-off switch, wrench set and instruction manual/parts diagram. $824.95
$
74
#84692 Digital Speed
Readout for R8 Milling
Machine includes magnetic base for convenient
mounting. Plugs into rear
of control panel to display
spindle RPM. $139.95
ADDITIONAL
FREIGHT
ANYWHERE IN
LOWER 48 STATES
MicroLux Milling Machine Specifications
Table size: 16” wide x 3-3/4” deep
Table travel (X direction): 8”
Cross slide travel (Y direction): 4”
Headstock travel (Z direction): 7”
Clearance (spindle to table-top): 10”
Center of spindle to face of column: 6”
Spindle taper: R8
Column angle: tilts from –45° to +45°
Overall size: 30” high x 20” deep x 20” wide
Spindle speed:
Continuously variable between 0 and
2,500 rpm with belt-driven spindle
Motor:
500 watt (0.67 hp) brushless DC, operates
from standard 120v AC outlet
Weight: 110 pounds
(basic machine without accessories)
Get the Most Out of Your New Milling Machine
with these Essential Accessories and Attachments
#83413
Parallel Set
#84700
ER Collet
Set
See pages 18 – 19
for full descriptions
#82578
Clamping Set
#82768
Fly Cutter
Set
#82577
4” Milling Vise
#82576 End Mill Set
ORDER BY FAX 1-908-665-9383
•
#84644
1-2-3
Blocks
#84692
Digital Speed
Readout
•
17
Accessories for Milling Machines, Lathes and Other Machine Tools
Check tool holder capacity and shank size before ordering. User provides mounting hardware.
H
A
J
4” WIDE
2” WIDE
B
C
M
L
K
D
E
N
#84634
Shown
G
F
Includes clamps and
mounting hardware
Q
P
A. #82792 rOTAry TABLE 4” diameter. One revolution of the handwheel
rotates the table 5°. Allows you to create an incredible variety of precision
parts. Table has MT2 hole. Includes adapter plate to mount the #82512 3-Jaw
Chuck and #82505 4-Jaw Chuck. T-slot size = 5/16”. See web site for full
specifications. $357.95 Now Only $259.95!*
/
B. #82793 DIVIDING PLATE Replaces the handwheel on the rotary table. Accurately
rotates stock a set number of degrees. Examples: for milling teeth on a gear, flats on a
nut, or drilling equally spaced holes. $84.25 Now Only $57.95!
/
C. #82794 TAILSTOCK Supports the end of a shaft when rotary table is placed vertically
on the machine table. $99.95 Now Only $79.95!
/
#82795 Buy the Rotary Table, Dividing Plate and the Tailstock
together for only $482.35 Now Only $339.95!*
/
D. #83952 POwEr fEED Saves laborious hand cranking and feeds table at uniform rate
to produce fine milled finishes. Electronic circuitry controls table speed from 0 to 12” per
minute in both directions; automatically stops table at end limits or in case of cutter
overload. Retains hand crank for normal operation. For use with machines with slotted
end of lead screw under the table (check your machine before ordering). $195.65
H. #82577 4” QUICK-LOCK MILLING VISE bolts directly to top of milling table. Jaws
are 4” wide x 7/8” deep and open 3-1/8”. Overall height 2-5/8”. Made of machined steel.
$80.65
J. #82747 2” QUICK-LOCK MILLING VISE bolts directly to top of milling table to hold
stock while machining. 2” wide x 5/8” deep jaws have grooves for holding round
objects; opens 1-1/2”. Overall height 1-5/8”. Made of machined steel. $45.25
K. #86260 PrECISION TOOLMAKErS VISE SET Angled clamping screw on moveable
jaw exerts downward force that keeps workpiece from lifting out of proper alignment.
Precision ground on all surfaces. Jaws are 2” wide x 1” deep. Opens to 3-1/4”. Overall
height 2-3/16”. Base plate is 6” long. Includes V-grooves for round workpieces and
threaded hole for mounting stops and other fixturing. Clamps to milling table with two
included mounting blocks and 20-piece M4 hardware kit. $92.05
L. #82576 8-PIECE END MILL SET (SINGLE END) Includes eight center cut, 2-flute
end mills in the following sizes: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 9/16 and 5/8 inch. $57.45
M. #82751 6-PIECE END MILL SET (SINGLE END) Includes center cut 2-flute end mills
in the following sizes: 1/8, 5/32, 3/16, 1/4, 5/16 and 3/8 inch. $31.65
E. #83383 TwO-wAy VISE fOr MILLING MACHINE AND DrILL PrESS Mounts to
milling machine or drill press table. Rotates 360 degrees and inclines from 0 to 90 degrees
to mill or drill at any angle in-between. 2” wide x 1” deep jaws open 1-7/8”. Height at 0
incline is 3-5/8”. Includes engraved markings for degrees of incline and rotation. $164.75
N. 6-PIECE END MILL SETS Double end, center cut, 3/8” shank. Sets include 1/8, 5/32,
3/16, 1/4, 5/16 and 3/8 inch end mills. 3/8” length of cut.
#84633 6-piece End Mill Set, 2-flute for aluminum and brass. $45.25
#84634 6-piece End Mill Set, 4-flute for steel. $45.25
f. #84644 1-2-3 BLOCKS Precision 1-2-3 blocks are extremely useful for layout and
set-up work. Our 1-2-3 Blocks (1” x 2” x 3”) are case hardened on all sides to 55-60 Rc and
ground parallel, flat and square within 0.0003”. They have 5 tapped holes (3/8-16) and 18
untapped holes so they can be bolted together in pairs to form custom sizes, angle plates,
V-blocks, etc. Set includes 2 matched blocks. $20.55 per set
P. #84687 6-PIECE HSS MINIATUrE CHUCKING rEAMEr SET with straight, round
shanks for use in chucks and collets. Set includes the following sizes: 3/32, 1/8, 5/32, 3/16,
7/32 and 1/4 inch. . . List $33.50 . . . Our Price $29.75
G. #84753 OVEr/UNDEr CHUCKING rEAMEr SET Includes .001” undersize reamers
for press-fit and .001” oversize reamers for sliding-fit of pins and shafts. Nominal sizes 1/8,
3/16, 1/4, 5/16, 3/8, 7/16 and 1/2 inch...14 high speed steel reamers in all, plus vinyl
storage case. $99.95 Now Only $79.95!
/
18
•
•
Q. #82773 7-PIECE HSS rEAMEr SET with round shanks for use in milling machine, drill
press and lathe tailstock chucks to machine holes to exact size. Includes 1/8, 3/16, 1/4, 5/16,
3/8, 7/16 and 1/2” sizes from 3-1/2” to 8” long in compartmented storage case. $56.15
*Use our web site shopping cart to calculate freight charge for shipment outside 48 contiguous U.S., or call our order line for assistance.
e
Accessories for MicroLux and Many Other Brands of Milling Machines, Lathes and Other Machine Tools
Check tool holder capacity and shank size before ordering. User provides mounting hardware.
R
S
U
T
V
Beware of
Cheap Imitations!
Z
Y
W
X
R. ER COLLET SETS FOR MILLING MACHINES AND LATHES
ER collets have a wide gripping range (about .040”) and provide a fast, easy and accurate
way of holding end mills, fly cutters, saw mandrels and drill bits in milling machine
spindles. When used in a lathe, they hold stock more accurately and have a better grip
than chucks, and thin-wall tubes can be gripped without distortion. They’re quick to set
up and can be used at high speed. Our ER collet sets include a precision ground shank
and “snap-in” collets with compression nut and spanner for easy tightening. The wood
case makes selection easy and offers good protection during storage.
Set #
Price
Type
Shank
Drawbar Hole
#84698
$87.50
ER16
MT1
M6 x 1.0
#85337
$87.50
ER16
MT2
M10 x 1.5
Both include collet sizes: 1/32, 1/16, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8
#84699
$118.40
ER25
MT3
M12 x 1.75
Includes collet sizes: 3/64, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2, 17/32, 9/16, 5/8
#84700
$118.40
ER25
R8
7/16-20
Includes collet sizes: 3/64, 3/32, 1/8, 3/16, 7/32, 1/4, 5/16, 11/32, 3/8, 13/32, 7/16, 1/2, 17/32, 9/16, 5/8
S. BORING HEAD Use to machine a pre-drilled hole or inside wall of a cylinder to final
size (up to 3” dia.) and finish. Head offsets up to .625” and holds 1/2” shank boring tools
sold below (T). Includes adjuster dial with .001” graduations and 2 wrenches. $102.95 ea.
#83379 Boring Head with R8 shank (fits MicroLux #84630 Milling Machine)
#82764 Boring Head with MT3 shank #84685 Boring Head with straight 1/2” shank
T. #82765 CARBIDE TIPPED BORING TOOL SET for use with boring heads sold above
(S). Includes 9 different sizes in tip lengths from 3/4” to 3” with 1/2” shanks and nicely
finished wood storage rack. $41.15
U. #84752 FLY CUTTER WITH R8 SHANK A heavy-duty accessory for the R8 mill that
machines flat surfaces up to 4” wide. Includes 3/8” square x 3” tool bit (unsharpened).
7/16-20 threaded hole for drawbar. $46.30
V. #82578 42-PIECE CLAMPING SET Includes 12 studs, 6 pairs of step
blocks, 4 tee nuts (for 12 mm wide slots), 4 flange nuts, 4 coupling nuts
and 6 hold-down bars, plus easy access storage rack. $55.20
W. #82283 3-PIECE COUNTERSINK SET High-speed steel, six-flute design makes smooth
82° countersinks for flush mounting flat head screws in wood, plastic, aluminum, brass and
soft steel. 3-piece set includes 3/16”, 1/4”
and 3/8” dia. with 3/16” and 1/4” shanks. $30.85 Now Only $19.95!
/
X. PRECISION GROUND V BLOCKS HOLD ROUND STOCK SECURELY V blocks are the
best way to hold round tubing or bar stock for milling, cutting, grinding, drilling or filing.
Fine quality hardened tool steel, precision milled and polished on all 6 sides. And all sides
are perfectly square with each other. Holds stock up to 1” dia. Blocks are approx. 1-1/4”
square x 1-5/8” long. #14255 Perfectly Matched Set of two V Blocks and two Clamps $51.45
Y. METALWORKING COOLANT SYSTEM FOR SMOOTHER FINISHES AND INCREASED
TOOL LIFE The MicroFlow TM System uses special nozzles that direct a fine stream of
lubricating coolant only where the cutter meets the workpiece…providing fine
machined finishes with less waste and less cost. Unlike spray systems, MicroFlow protects
you from airborne particles and needs no compressor. Its magnetic base lets you move
it easily from lathe to mill to drill press to grinder. At 1/4 the price of other flow-type
systems, you can even afford one for each machine. Includes 4 liter heavy-duty tank with
self-contained low-voltage pump and convenient on/off switch; 3 interchangeable
nozzles to adjust flow rate; magnetic base with adjustable nozzle holder; 32” of tubing.
For use with oil-less synthetic coolants only...for best results, use with MicroFlow coolant
sold below. #83338 MicroFlow Coolant System $57.15
#83344 Red (finest)
pkg. of 6 $8.10
Z. #82768 3-PIECE FLY CUTTER SET Used in the milling machine to cut a large flat surface
on a piece of stock. Includes 3 black oxide steel holders: 3/4”, 1-1/8” and 1-3/8” diameter, 3
ready-to-sharpen tool blanks, and wood storage rack. 1/2” shanks. $28.50 $19.95
#82769 SET OF 3 EXTRA TOOL BLANKS (One for each holder) $12.30 $8.95
#86484 REPLACEMENT INSERT SET for above includes 5 carbide inserts and 5 mounting screws. $39.95
•
#83343 Blue (finer)
pkg. of 6 $8.10
#83340 MICROFLOW CONCENTRATED COOLANT AND LUBRICANT Oil-less synthetic
fluid formulated especially for use with the MicroFlow system. Inhibits bacterial growth
and won’t rust materials or machines. 16 ounce concentrate makes up to 4 gallons when
mixed with water. $9.50
#86483 INDEXIBLE TOOL HOLDER
SET Five 6 mm (.235”) square x
NEW!
2-1/2” long blackened steel
shanks fit MicroLux and other
mini lathe tool holders. Triangular
carbide inserts with 1/64” radius cutting tips
index to 3 positions to restore the cutting edge
when needed. Grade PC300 TiN-TiC-TiN coated for
cutting at higher speeds and with greater lubricity.
Includes 5 cutting angles: 2 left, 2 right, and 1 center, plus T8 wrench for retaining screws. $59.95
#83342 Pink (fine)
pkg. of 6 $8.10
Extra Nozzles
/
/
#83413 20-PIECE
PARALLEL SET
Includes 10 pairs of
1/8” x 6” bars, from
1/2” to 1-5/8” high
(for larger vises) in
1/8 inch increments,
plus compartmented
molded case.
Color may vary.
List $55.00
Our Price $41.15
/
Now Only $37.95!
ORDER BY FAX 1-908-665-9383
•
•
19

Miniature Lumber Yard - Micro-Mark

Transcription

Similar documents

Moving a Monarch 10EE - Home Metal Shop Club

Paul Strisik NA - American Fine Art Magazine

CHOPMASTER - Forrest Saw Blades

koevo autoportante

HARDINGE® HLV-H - Babin Machine Tool

• Changing A Jet 1642 On/Off Switch Tutorial

DL-66 Heavy-duty Land Clearing

Router High-Flex Green Efficiency

Fishing Report #7 - Capt. Tony Buffa`s Fishing Charters