docInternational Farmall - Steiner Tractor Parts
download 
Report Transcription
International Farmall - Steiner Tractor Parts
International "Tractor fun for all ages - Rooster, our friend on his Cub" Lyn Dors, Dublin, New Hampshire "1952 International Super A pulling 2 furrow drag plow" James Turner, Kilbride, Ontario, Canada "1950 Farmall M used around their small farm in Bear Creek, Wisconsin" Shawn Swinford, Bear Creek, Wisconsin IH/Farmall IH/Farmall "1949 International Farmall Super A - Making hay while the sun shines" Terence Trevisan, West Grove, Pennsylvania "Original 1951 Farmall Super A" Ken Maynard, Surry, New Hampshire "1937 Farmall F-30 that I saved from the scrap pile and completely restored in 2011/12" Pete Kadilak, Midland, Pennsylvania Customer submitted photos Thanks for giving us your "Freshly restored 1954 Farmall Super MTA, Bryce Phillips, best shot! The following Mount Crawford, Virginia photos were submitted by folks just like you in our annual catalog photo contest. Our complete album can be viewed at http://www.steinertractor. com/tractor-photo winners.html. View more pictures and tractor stories in our digital books on our web site under "Steiner Community." "In the furrow at IH Harvesters Collectors Club Chapter 18 New England Plow Days" Dave Eklund, Orange, Massachusetts 208 "Farmall 230 overlooking spring house and pond" Dave Fabrizio, Coatesville, Pennsylvania "Joy Ride Before the Storm" Jeremy Kohout, Milford, Nebraska (Tractor owned by Adolph Kohout, Dorchester, Nebraska) "Ready to work with the Farmall C!" Rhett Wadsworth, Beech Island, South Carolina "1948 Farmall M" Guy Whalen, Veyo, Utah STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 209 International: Alphabetical index A Air cleaner change gauge.............255 Air cleaner parts bail......................................................288 caps...........................................287, 288 clamps...............................................288 filter element...................................288 hoses..................................................288 oil cups..............................................288 pipes...................................................288 vacuator valves...............................288 Alternators, parts alternators........................................269 bracket..............................................269 bracket kits......................................269 mounting kit...................................269 pulleys...............................................269 shield.................................................269 Amp gauges.......................................252 Axle, parts bumper.............................................309 front pivot bolster.........................309 front pivot bolster bracket.........309 gaskets..............................................319 pin.......................................................309 seals...........................................319, 320 washer...............................................319 wide front center tube.................309 B Base engine kit..................................223 Battery boxes, parts battery boxes.........................258, 259 bushings...........................................259 covers........................................258, 260 doors..................................................260 front covers.............................258, 259 grommet...........................................260 hardware...............................258 - 260 j-bolt..........................................259, 260 lids..............................................258, 259 retainer..............................................259 side covers.......................................259 trays....................................................260 Battery cables....................................258 clip......................................................257 Belt pulley parts bearing..............................................325 seal......................................................325 Blade parts bolt spacer locator........................334 front lifting lever............................334 210 B Bolts.......234, 246, 259, 260, 285, 295, 300, 306, 310, 313, 314, 316, 318, 325, 326, 329, 331, 333 Boots......295, 301, 308, 317, 322, 324 Brake parts bolts...................................................318 boots..................................................317 cover..................................................316 disc brake ball.................................319 disc brake balls...............................319 discs...........................................318, 319 drum..................................................316 dust covers.......................................317 lined brake bands..........................318 lock assist attachments......316, 317 pawl pin............................................316 riveting tools...................................317 screw..................................................316 shaft seal...........................................317 shafts..................................................317 springs............................ 316, 318, 319 Bull pinions................................320, 321 C Camshaft, parts bearing / bushing sets.................227 camshaft...........................................227 gears...................................................227 Caps air cleaner................................287, 288 drain...................................................248 front hub...........................................326 fuel......................................................291 oil fill / breather.....................231, 232 oil filter drain...................................232 power steering reservoir............306 pre cleaner.......................................289 radiator...................................246 - 248 rain.............................................236, 237 steering wheel.......................302, 303 Carburetors, parts adjustment needle assy..............239 bushing.............................................239 carburetors...........................238 - 240 choke lever......................................239 discs...........................................239, 240 elbow strainer assy..............239, 240 floats.........................................241, 242 fuel line fitting................................240 fuel line fittings..............................240 gaskets..............................................241 idle tube............................................239 main jets...........................................239 main nozzles...................................239 needle float valves........................240 repair kits...............................242 - 245 throttle shafts.................................240 venturis.............................................240 Choke parts cables.................................................238 C Choke parts cont... clip......................................................238 rod.......................................................238 Cigarette lighters..............................262 Cluster gauges...................................255 Clutch, trans. parts alignment tools...................296 - 298 bearings...................................297, 298 block off plates...............................300 bolts..........................................295, 300 boot....................................................295 brake buttons.................................295 bushings..................................295, 296 cable...................................................300 carrier.................................................298 coupler hub.....................................295 covers.................................................300 discs...........................................296, 297 dust cover.........................................294 gaskets.....................................298, 299 gears..........................................298, 299 inspection cover............................296 inspection cover plates......294, 295 kits...........................................295 - 298 park lock assy..................................300 pedal adaptor.................................298 pins.................................296, 298 - 300 pressure plates....................295 - 297 release yoke.....................................296 seals....................................................299 shafts............................... 295, 298, 299 shift cam detent.............................300 shift pattern plate..........................300 springs............................ 295, 299, 300 throw out bearing carrier...........296 throw out bearings............296 - 298 torque amplifier button plug....300 washer...............................................297 Crankshaft, parts bearings.................................229 - 231 crankshaft........................................227 gaskets.....................................228, 229 gears...................................................227 pulleys...............................................227 seals....................................................228 Cultivator parts clamp & wedge assy.....................334 wedge bolt & nut...........................334 wedge only......................................334 Cylinder heads...................................223 nuts.....................................................224 studs..........................................223, 224 D Dash cowling............................257, 286 Dash light, parts lens.....................................................274 Data book...................................336, 337 Decals..........................................335, 336 D Distributor parts brackets............................................263 bushing & shim kit........................265 caps...........................................265, 266 clamps...............................................265 clip bracket......................................265 clips....................................................265 coils.....................................................263 distributor........................................264 drive gear.........................................265 drive housing..................................256 dust covers..............................265, 266 gasket................................................266 grommet...........................................264 housing.............................................264 loom holder.....................................264 plate..........................................264, 265 resistor...............................................263 rotor buttons..........................265, 266 shaft...................................................265 shaft bushing and shim kit........266 spark plug wire sets.............263, 264 spark plugs......................................264 spring clips.......................................266 tags.....................................................266 terminal insulator assys......265, 266 terminal screw.......................265, 266 tune-up kits............................265, 266 washer......................................265, 266 Drawbars, parts bolts..........................................331, 333 bushing.............................................332 clevis..................................................332 crank arms...............................332, 333 drawbars...........................................332 guide straps.....................................332 hardware..........................................331 kits......................................................333 latch spring......................................332 lock.....................................................332 pin retainer plate...........................333 pins..........................................331 - 334 rods.....................................................333 shaft...................................................333 shaft supports.................................333 support.............................................333 top links............................................331 DVDs.....................................................338 E Electric outlet socket, parts boot....................................................257 connector plug...............................257 socket................................................257 Emblems / nameplates clips...........................................280, 281 emblems................................279 - 281 hardware..........................................279 Engine assy., break in lube............229 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm E Engine gasket sets...........................223 seals....................................................228 Engine oil caps.........................231, 232 Engine overhaul kits........................222 Exhaust stacks, parts clamps......................................237, 238 exhaust stacks.......................237, 238 F Fan assys..............................................250 drive pulley assy............................250 Fan belts...............................................250 Fan shroud..........................................249 Fenders, parts...........................313, 314 bushing.............................................314 extension kit....................................314 extension plates.............................315 grommet...........................................314 mounting brackets.......................314 u-bolts...............................................314 Fertilizer hopper...............................334 Final drive parts gaskets..............................................319 seals...........................................319, 320 washer...............................................319 Floor mat.............................................316 Flywheel ring gears.........................233 Front grilles, parts grilles.................................................284 Fuel filters bail......................................................293 element.............................................293 fuel filters..........................................293 gasket................................................293 glass bowl........................................293 screen................................................293 Fuel gauges........................................254 Fuel lines.....................................291, 292 fitting.................................................292 Fuel pump repair kits......................245 Fuel sending units............................254 gasket................................................254 Fuel tank parts caps....................................................291 gaskets..............................................291 grommet...........................................291 nut.......................................................291 pads....................................................290 straightening tool.........................290 webbings.................................290, 291 Fuse holder.........................................263 G Gauges air cleaner change.........................255 amp....................................................252 cluster gauges................................255 fuel......................................................254 glow plug meter............................252 oil pressure.............................252, 253 G Gauges cont.. tachometers...........................255, 256 touch control temperature........253 water temperature...............253, 254 Gear shift parts boots..................................................301 fork......................................................300 knobs........................................300, 301 lever....................................................300 pattern inserts................................301 pin kit.................................................300 seal......................................................300 spring.................................................301 Gears camshaft...........................................227 crankshaft........................................227 drive gear.........................................265 flywheel ring...................................233 hydraulic pump..............................321 oil pump drive................................231 steering sector.......................304, 305 tachometer drive gear assy.......255 transmission...........................298, 299 Generator parts band cover.......................................268 belts....................................................268 pulleys...............................................268 tags.....................................................268 Glow plug............................................264 Glow plug meter...............................252 Governor controls, parts assys..........................................293, 294 cables.................................................294 discs....................................................294 handle................................................294 knob...................................................294 levers.........................................293, 294 nut.......................................................294 plate...................................................294 repair keyway..................................294 shaft...................................................294 springs...............................................294 Governor, parts arm......................................................245 governor...........................................245 rod.......................................................245 springs...............................................245 throttle shaft rebuild kit..............245 Grab handles......................................315 Grilles, parts center grille section......................284 clips....................................................283 cowlings............................................283 grilles........................................283, 284 housing.............................................284 inserts.......................................283, 284 panel..................................................284 repair patch.....................................283 screens.....................................283, 284 screw..................................................283 G Grilles, parts cont... spring.................................................284 H Hand cranks...............................282, 283 brackets............................................282 Headlights, parts bezels........................................275, 276 bulbs.......................................275 - 278 gaskets.....................................275, 277 headlights........................................275 knobs.................................................278 lens.....................................................277 panels................................................276 reflectors...........................................277 rings................................ 275, 277, 278 switch................................................278 terminal.............................................277 washer...............................................276 Heat shields........................................287 Hood, parts bolts...................................................285 fastener.............................................285 hardware kit....................................285 hood extensions............................286 hoods.................................................285 jhook..................................................285 nuts.....................................................285 ornaments........................................279 screws.......................................285, 286 washers.............................................285 Hose clamps.......................................290 Hydraulic parts boots..................................................322 control rods.....................................322 decal...................................................323 dipstick..............................................321 friction disc......................................322 gasket................................................322 gears...................................................321 knobs.................................................322 pin.......................................................321 plug....................................................322 port blocks.......................................321 pumps...............................................321 retainer clip......................................321 seal......................................................321 seals....................................................321 spring.................................................321 springs......................................322, 323 touch control block gasket kit..322 touch control stop........................321 washers.............................................323 I Ignition parts bracket..............................................263 brackets............................................263 bushing and shim kit...................265 caps...........................................265, 266 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com I Ignition parts cont... clamps...............................................265 clip bracket......................................265 clips....................................................265 coils.....................................................263 distributor........................................264 drive gear.........................................265 dust covers..............................265, 266 gasket................................................266 grommet...........................................264 housing.............................................264 loom holder.....................................264 plates........................................264, 265 resistor...............................................263 rotor buttons..........................265, 266 shaft...................................................265 shaft bushing and shim kit........266 spark plug wire sets.............263, 264 spark plugs......................................264 spring clips.......................................266 tags.....................................................266 terminal insulator assys......265, 266 terminal screw.......................265, 266 tune-up kits............................265, 266 washer......................................265, 266 Ignition/key switches.............272, 273 Instrument panel housings.257, 286 K Knobs.............300 - 302, 313, 322, 324 L Light bar..............................................278 hardware..........................................278 Light brackets....................................278 hardware..........................................278 Light clamps.......................................278 Light switches, parts knobs........................................273, 274 resistors.............................................274 switches...................................273, 274 M Magnetos, parts caps....................................................267 coils.....................................................267 condensers......................................267 covers.................................................267 gaskets..............................................267 insulator............................................267 magneto...........................................267 manual..............................................267 points.................................................267 rotors..................................................267 terminal screw................................267 tune up kits......................................267 washer...............................................267 Index continues on next page 211 IH/Farmall IH/Farmall We carry a wide variety of tractor parts for classic IH/Farmall tractors. Whether you want to repair or restore your classic, we have the tractor parts you need! M Manifolds, parts adapters............................................219 clamp........................................217, 233 elbows....................................217 - 220 exhaust pipes.......................217 - 219 ferrules..............................................219 gasket material...............................220 gaskets...................................217 - 220 hardware kits..................................221 heat control weight......................219 manifolds...............................217 - 220 nuts............................................220, 221 pipe extensions..............................218 rings...................................................220 sleeve (donut).................................220 spring.................................................219 washers.............................................221 Manuals.....................................336 - 338 Mufflers clamps............................ 233, 234, 237 mufflers..................................234 - 236 u-bolt.................................................234 O Oil / breather caps...................231, 232 gasket................................................232 Oil filters......................................232, 233 adapter kit........................................233 Oil pan drain plug drain cap...........................................232 drain plug.........................................232 gaskets..............................................232 petcock..............................................232 washer...............................................232 Oil pressure gauges, parts bulb....................................................252 copper line kit.................................253 fittings...............................................253 gauges......................................252, 253 jewel lens assy................................252 switch................................................253 Oil pump..............................................231 Oil pump drive gear........................231 P Pedal guards.......................................321 Piston ring sets.........................221, 222 Power steering parts bolt.....................................................306 cap......................................................306 couplers............................................307 filter....................................................306 mounting bracket................306, 307 port blocks..............................306, 307 priority flow control valve..........307 pulleys...............................................306 pump.................................................306 seal and o-ring kit.........................306 torque generator...........................306 212 P Pre-cleaner parts assys...................................................290 base....................................................289 bowls..................................................289 caps assys.........................................289 clip/springs kit................................289 covers.................................................289 decal...................................................290 dust jars.............................................290 gaskets..............................................290 pre-screener....................................289 screen................................................289 PTO parts bearing kit........................................323 bearing retainer gasket...............323 bearings............................................323 belt pulley........................................323 boot....................................................324 brake band.......................................324 clutch load spring plates............324 clutch rebuild kit............................324 discs....................................................324 drum..................................................324 gasket................................................323 gasket kit..........................................324 grommet...........................................324 guard..................................................325 knobs.................................................324 over-running clutches.................325 pressure plate flywheels.............324 seals...........................................324, 325 shaft...................................................323 shields................................................325 shift collar.........................................323 shift lever & shaft...........................323 shift lever guide.............................323 Pushrods..............................................226 gaskets..............................................226 R Radiator, parts bolt kit...............................................246 caps.........................................246 - 248 clamps...............................................249 cores...................................................246 drain plugs.......................................248 gaskets.....................................246, 248 hoses..................................................249 housing.............................................246 mounting pads...............................247 nut.......................................................247 pipes...................................................249 radiators...................................246, 247 spring.................................................247 Raincaps......................................236, 237 Rear axle, parts hub.....................................................329 Rebore kits..........................................222 Rims, rear and front bolts..........................................329, 331 R Rims, rear and front cont... inner tube valves...........................328 nuts.....................................................328 rear rim clamp................................329 reinforcing ring..............................330 rims.................................327, 329 - 331 stops...................................................331 washer...............................................329 S Seats, parts adjustment handle.......................312 assys..........................................311, 312 back plates.......................................311 bearing..............................................313 bolt............................................310, 313 bolt kit...............................................310 brackets............................................309 bumpers...........................................312 bushings..................................312, 313 coils............................................309, 310 cushions............................................311 frame..................................................311 hardware kit....................................312 knob...................................................313 pads....................................................310 pans...........................................309, 310 pins............................................309, 310 pivot support rods........................313 retaining clip...................................310 shafts..................................................313 shock absorbers....................312, 313 side plates........................................312 springs............................ 309, 310, 312 support assy....................................310 support covers...............................312 support plate kit............................311 toolbox & seat supports..............309 tube assy...........................................313 upholstered flip back seats........309 Sediment bowl assys., parts bail assys..................................292, 293 gaskets.....................................292, 293 glass bowls.............................292, 293 screens.....................................292, 293 sediment bowl assys....................292 Serial number tags, parts rivets...................................................282 tags.....................................................282 Shift quadrant light, part bulb....................................................274 light....................................................274 Side panels.................................286, 287 Sleeve and piston kits.....................222 Sleeve sealing o-rings.....................222 Spark plug wiring sets...........263, 264 loom holder.....................................264 Spark plugs.........................................264 Starter hand cranks.................282, 283 brackets............................................282 S Starter parts actuator lever and bracket.........271 band covers.....................................270 drives.................................................270 housings...........................................270 keys.....................................................273 knob...................................................272 levers..................................................271 repair studs......................................270 rod.......................................................271 spring.................................................270 starter solenoids............................270 switch box........................................271 switches.................................270 - 273 tags.....................................................270 Steering parts bearing..............................................305 bushing.............................................304 dust cover.........................................306 gaskets..............................................305 housing.............................................305 kit........................................................305 nut.......................................................304 pin stud.............................................305 retainer..............................................305 seals.........................................304 - 306 sector gears............................304, 305 sector shafts....................................304 set screws.........................................304 shaft...................................................305 shaft cross and bearing...............306 shafts..................................................305 support bearing assy...................304 support knuckles...........................304 universal joint.................................306 worm shaft.......................................305 Steering wheels, parts center caps / emblems.......302, 303 cover.........................................302, 303 decal..........................................302, 303 gasket................................................302 grommet...........................................303 knob...................................................302 lever....................................................302 nuts..........................................302 - 304 plates........................................302, 303 spinner..............................................304 spring.................................................302 steering wheels...................301 - 303 Steps.....................................................315 T Tachometers bracket..............................................255 cable connector housing............255 cable connector housing clip...256 cables........................................256, 257 connection housing plate..........256 drive assy..........................................255 drive gear.........................................255 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm T Tachometers cont... gasket kit..........................................255 tachometers...........................255, 256 Tail lights, parts bulbs.......................................276 - 278 gaskets...................................276 - 278 knobs.................................................278 lens..........................................276 - 278 reflectors...........................................277 rings........................................276 - 278 switch................................................278 tail lights..................................276, 277 terminal.............................................277 Thermostats, parts gasket................................................249 thermostats.....................................249 Three point hitch kits, parts bolts..........................................331, 333 bushing.............................................332 clevis..................................................332 crank arms...............................332, 333 drawbar lock...................................332 drawbars...........................................332 guide straps.....................................332 hardware kit....................................331 kits......................................................333 latch spring......................................332 pin retainer plate...........................333 pins..........................................331 - 334 rods.....................................................333 shaft...................................................333 shaft supports.................................333 stabilizer bar...........................332, 335 support.............................................333 top links............................................331 Throttle parts assys..........................................293, 294 cables.................................................294 discs....................................................294 handle................................................294 knob...................................................294 levers.........................................293, 294 nut.......................................................294 plate...................................................294 repair keyway..................................294 shaft...................................................294 springs...............................................294 Tie rod parts assy.....................................................308 bars.....................................................307 boots..................................................308 end assembly..................................307 ends....................................................308 jam nut..............................................307 tubes..................................................307 Tires, tubes nut.......................................................328 tires.....................................................328 tubes..................................................328 valves.................................................328 T Toolboxes............................................315 brackets............................................315 decal...................................................315 latch & spring assy........................316 light bar.............................................315 u-bolt set..........................................316 Touch control temp gauge...........253 Transmission pressure switch......263 Transmission, clutch parts alignment tools...................296 - 298 bearings...................................297, 298 block off plates...............................300 bolts..........................................295, 300 boot....................................................295 brake buttons.................................295 bushings..................................295, 296 cable...................................................300 carrier.................................................298 coupler hub.....................................295 covers.................................................300 discs...........................................296, 297 dust cover.........................................294 gaskets.....................................298, 299 gears..........................................298, 299 inspection cover............................296 inspection cover plates......294, 295 kits...........................................295 - 298 park lock assy..................................300 pedal adaptor.................................298 pins.................................296, 298 - 300 pressure plates....................295 - 297 release yoke.....................................296 seals....................................................299 shafts............................... 295, 298, 299 shift cam detent.............................300 shift pattern plate..........................300 springs............................ 295, 299, 300 throw out bearing carrier...........296 throw out bearings............296 - 298 torque amplifier button plug....300 washer...............................................297 W Water jacket covers, parts cont... gaskets..............................................250 Water pumps.............................250, 251 gasket................................................251 nut.......................................................251 pulley flanges.................................251 seal......................................................251 studs...................................................251 Water temperature gauges bracket..............................................254 gauges......................................253, 254 Weight, front bracket..............................................328 hardware..........................................328 locking cam.....................................328 spacer................................................328 wheel.................................................328 Weights, wheel weight...............................................331 weight bolts....................................331 Wheels, front and rear bearing kits.............................326, 327 bolts................................ 325, 326, 331 W Wheels, front and rear cont... front hub cap..................................326 front wheel clamp.........................326 hub.....................................................327 inner tube valves...........................328 lock nut.............................................326 nuts.....................................................328 reinforcing ring..............................330 rims..........................................329 - 331 seals....................................................326 stops...................................................331 wheels...............................................327 Wiring harness kits................260 - 262 clips....................................................261 grommets.........................................262 junction blocks...............................262 Wittek hose clamps................249, 290 Y Yard spinner.......................................338 IH/Farmall IH/Farmall International: Alphabetical index cont... International: Casting date codes IH used casting date codes, which are usually found cast upside down on the larger castings of a tractor. IH used these date codes from 1931 to at least 1981. These letters can be used to partially date a tractor whose serial tag is missing or stolen. All castings were generally used in production within six months of manufacture. By finding this letter code, one can validate the year a tractor has been claimed to be built. Tractors with mismatched date codes may have had casting parts replaced or have been built from several scrapped machines' casting parts. U Umbrellas............................................334 V Valve cover gaskets..........................226 Valve grind gasket sets..........224, 225 Valve train kits..........................225, 226 Videos...................................................338 Voltage regulators conversion kit.................................268 cut out relay assy...........................268 regulators................................268, 269 W Warning lights, parts.......................277 lens.....................................................277 Water jacket covers, parts covers.................................................250 Letter Year Cast A..................... 1931, 1955, 1976 B..................... 1932, 1956 C..................... 1933, 1957, 1977 D.................... 1934, 1958, 1978 E..................... 1935, 1959, 1979 F..................... 1936, 1960, 1980 G.................... 1937, 1961, 1981 H.................... 1938, 1962 I...................... 1939 J...................... 1940, 1963 K..................... 1941, 1964 L..................... 1942, 1965 M.................... 1943, 1966 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Letter Year Cast N.................... 1944, 1967 O.................... 1945 P..................... 1946, 1968 Q.................... 1947 R..................... 1948, 1969 S..................... 1949, 1970 T..................... 1950, 1971 U.................... 1951, 1972 V..................... Not used W................... 1951, 1973 X..................... 1952, 1974 Y..................... 1953, 1975 Z..................... 1954 213 IH/Farmall: Beginning serial numbers Except where indicated the serial number plate is generally found on left or right side of transmission housing or clutch housing. 1976..........................2951 INTERNATIONAL HARVESTER, FARMALL Model I-1566, F-1566 1974..........................7101 1975..........................7837 1976....................... 12589 Model I-140, F-140 1958............................ 501 1959..........................2011 1960..........................8082 1961....................... 11168 1962....................... 16637 1963....................... 21181 1964....................... 25387 1965....................... 28408 1966....................... 31285 1967....................... 34818 1968....................... 37352 1969....................... 39906 1970....................... 42300 1971....................... 44424 1972....................... 46605 1973....................... 48507 1974....................... 50720 1975....................... 54273 1976....................... 57773 1977....................... 60839 1978....................... 63111 1979....................... 64544 Model I-966, F-966 1971..........................7101 1972....................... 11815 1973....................... 17794 1974....................... 22526 1975....................... 28119 1976....................... 31772 Model I-1066, F-1066 1971..........................7101 1972....................... 12677 1973....................... 24205 1974....................... 34949 1975....................... 46855 1976....................... 56672 Model I-1466, F-1466 1971..........................7101 1972....................... 10408 1973....................... 15533 1974....................... 19746 1975....................... 25404 214 Model I-1568, F-1568 1974..........................7201 1975..........................7821 1975..........................7975 Model 10-20 Gear Drive - KC 1923............................ 501 1924..........................7641 1925....................... 18869 1926....................... 37728 1927....................... 62824 1928....................... 89470 1929.....................119823 1930.....................159111 1931.....................191486 1932.....................201013 1934.....................204239 1935.....................206179 1936.....................207275 1937.....................210235 1938.....................212425 1939.....................214886 Model 10-20 Gear Drive - NC & NT 1926............................ 501 1927............................ 649 1928............................ 832 1929..........................1155 1930..........................1543 1931..........................1750 1932..........................1833 1933..........................1912 1934..........................1952 Cub serial number name plate is located on the right side of the steering gear housing. Cub 1947............................ 501 1948....................... 11348 1949....................... 57831 1950....................... 99536 1951.....................121454 1952.....................144455 1953.....................162284 Cub Cadet 1961............................ 590 1962....................... 23675 1963....................... 49846 1964....................... 73875 1965.....................104307 1966.....................137051 1968.....................225056 1969.....................280840 1970.....................322858 1971.....................373301 1972.....................417643 1973.....................457305 1974.....................495749 1975.....................536073 INTERNATIONAL Model B-275 1959............................ 501 1960..........................1720 1961..........................3415 Cub Lo-Boy serial number name plate is located on the right side of the steering gear housing. Cub Lo-Boy 1955............................ 501 1956..........................2555 1957..........................3929 1958..........................6582 1959....................... 10567 1960....................... 12371 1961....................... 13904 1962....................... 15506 1963....................... 16440 1964....................... 17928 1965....................... 19406 1966....................... 21176 1967....................... 23115 1968....................... 24481 Cub 154, 184, 185 Lo-Boy serial number name plate is located on the top left front side of the main frame. Cub 154 Lo-Boy 1968..........................3505 1969..........................3773 1970....................... 15502 1971....................... 20332 1972....................... 23343 1973....................... 27538 1974....................... 31766 Cub 184 Lo-Boy 1978....................... 46163 1979....................... 48030 Cub 185 Lo-Boy 1974....................... 37001 1975....................... 37316 Hydro 70 1973..........................7501 1974..........................7570 1975..........................8681 1976....................... 10094 Hydro 100 1973..........................7501 1974..........................7727 1975....................... 10915 1976....................... 12434 Model I-100 1954............................ 501 1955..........................1720 1956....................... 12895 Model I-240 1958............................ 501 1959..........................1777 1960..........................3415 1961..........................3989 1962..........................4562 Model I-300U 1955............................ 501 1956....................... 30219 Model I-330 1957............................ 501 1958..........................1488 Model I-340 1958............................ 501 1959..........................2467 1960..........................5741 1961..........................8736 1962....................... 11141 1963....................... 12032 Model I-350 1956............................ 501 1957..........................1963 1958....................... 15049 Model IW-400 1954............................ 501 1955............................ 510 1956..........................2187 Model I-404, 2404 1961............................ 501 1962..........................1045 1963..........................4205 1964..........................6452 1965..........................8292 1966..........................9548 1967....................... 10534 1968....................... 11032 Model I-424 1964............................ 501 1965..........................1402 1966..........................7841 1967....................... 13627 Model I-444 1967............................ 501 1968..........................1190 1969..........................5720 1970..........................9010 1971....................... 12357 Model IW-450 1956............................ 501 1957............................ 568 1958..........................1662 Model I-454 1970............................ 501 1971............................ 508 1972..........................4908 1973..........................8064 Model I-460 1958............................ 501 1959..........................2711 1960..........................6883 1961..........................9420 1962....................... 11619 1963....................... 11898 Model I-464 1973.....................100003 1974.....................102196 1975.....................104775 1976.....................107128 1977.....................108636 1978.....................110479 Model I-504, 2504 1961............................ 501 1962............................ 512 1963..........................3376 1964..........................6797 1965....................... 10996 1966....................... 14695 1967....................... 17992 1968....................... 20392 Model I-544, 2544 1968....................... 10250 1969....................... 12699 1970....................... 14589 1971....................... 16018 1972....................... 16838 1973....................... 17341 Model I-560 1958............................ 501 1959..........................1210 1960..........................3103 1961..........................4032 1962..........................4944 1963..........................5598 Model I-574 1970............................ 329 1971............................ 350 1972............................ 504 1973..........................7074 1974.....................102961 1975.....................107880 1976.....................111783 1977.....................114195 1978.....................117065 Model I-600 1956............................ 501 1957..........................1986 Model I-606, 2606 1961............................ 501 1962............................ 503 1963..........................1702 1964..........................3214 1965..........................5041 1966..........................6960 1967..........................7922 Model I-650 1956............................ 501 1957............................ 688 1958....................... 11659 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Model I-656, 2656 1965..........................8501 1966....................... 15505 1967....................... 24372 1968....................... 32007 1969....................... 38861 1970....................... 42518 1971....................... 45497 1972....................... 47951 Model I-660 1959............................ 501 1960..........................3398 1961..........................4259 1962..........................5883 1963..........................6995 Model I-664 1972..........................2501 1973..........................3212 1974..........................3824 Model I-666 1972..........................7500 1973..........................8200 1974....................... 11585 1975....................... 13131 1976....................... 15739 Model I-674 1973.....................100001 1974.....................101862 1975.....................103172 1976.....................105946 1977.....................107639 1978.....................110254 Model I-706, 2706 1963............................ 501 1964..........................7073 1965....................... 21162 1966....................... 30288 1967....................... 38521 Model I-756, 2756 1967..........................7501 1968..........................7672 1969..........................8164 1970..........................8424 1971..........................8427 Model I-766 1971..........................7101 1972..........................7416 1973..........................9611 1974....................... 12378 1975....................... 14360 1976....................... 16840 Model I-806, 2806 1963............................ 501 1964..........................4709 1965....................... 15946 1966....................... 24038 1967....................... 34943 Model I-826, 2826 1969..........................7501 1970..........................8153 1971....................... 16352 Model I-1026, 21026 1970..........................7501 1971..........................9707 Model I-1456, 21456 1969....................... 10001 1970....................... 10025 1971....................... 10249 Model I-4100 1966..........................8001 1967..........................8723 1968..........................8986 Model I-4156 1969..........................9219 1970..........................9365 Model I-4166 1972....................... 10001 1973....................... 10769 1974....................... 11256 1975....................... 11684 1976....................... 12200 4366, 4568 serial number name plate is located on the left side on top step. Model I-4366 1973..........................7501 1974..........................7780 1975..........................8616 1976....................... 10227 1961....................... 11168 1962....................... 16637 1963....................... 21181 1964....................... 25387 1965....................... 28408 1966....................... 31285 1967....................... 34818 1968....................... 37352 1969....................... 39906 1970....................... 42300 1971....................... 44424 1972....................... 46605 1973....................... 48507 1974....................... 50720 1975....................... 54273 1976....................... 57773 1977....................... 60839 1978....................... 63111 1979....................... 64544 Model 200 1954............................ 501 1955..........................1032 1956....................... 10904 Model 230 1956............................ 501 1957............................ 815 1958..........................6827 Model 240 1958............................ 501 1959..........................1777 1960..........................3415 1961..........................3989 1962..........................4562 Model 300 1954............................ 501 1955..........................1779 1956....................... 23224 FARMALL Model 340 1958............................ 501 1959..........................2723 1960..........................5411 1961..........................6642 1962..........................7276 1963..........................7699 Model 100 1954............................ 501 1955..........................1720 1956....................... 12895 Model 350 1956............................ 501 1957..........................1030 1958....................... 14674 Model 130 1956............................ 501 1957..........................1120 1958..........................8363 Model 400 1954............................ 501 1955..........................2588 1956....................... 29065 Model 140 1958............................ 501 1959..........................2011 1960..........................8082 Model 404 1961............................ 501 1962............................ 826 1963..........................1936 Model I-4568 1975..........................8001 1976..........................8368 1964..........................2259 1965..........................2568 1966..........................2790 1967..........................2980 1968..........................3170 Model 450 1956............................ 501 1957..........................1734 1958....................... 22305 Model 460 1958............................ 501 1959..........................4765 1960....................... 16902 1961....................... 22622 1962....................... 28029 1963....................... 31552 Model 504 1961............................ 501 1962............................ 810 1963..........................7000 1964..........................7732 1965....................... 10696 1966....................... 13596 1967....................... 15113 1968....................... 16115 Model 544 1968....................... 10250 1969....................... 12541 1970....................... 13585 1971....................... 14507 1972....................... 15262 1973....................... 15738 Model 560 1958............................ 501 1959..........................7341 1960....................... 26914 1961....................... 36125 1962....................... 47798 1963....................... 60278 Model 656 1965..........................8501 1966....................... 15505 1967....................... 24372 1968....................... 32007 1969....................... 38861 1970....................... 42518 1971....................... 45497 1972....................... 47951 Model 666 1972..........................7500 1973..........................8200 1974....................... 11585 1975....................... 13131 1976....................... 15739 Model 706 1963............................ 501 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 1964..........................7073 1965....................... 21162 1966....................... 30288 1967....................... 38521 Model 1256 1967..........................7501 1968..........................8849 1969....................... 13140 Model 756 1967..........................7501 1968..........................9940 1969....................... 14125 1970....................... 17832 1971....................... 18374 Model 1456 1969....................... 10001 1970....................... 10405 1971....................... 14149 Model 766 1971..........................7101 1972..........................7416 1973..........................9611 1974....................... 12378 1975....................... 14360 1976....................... 16840 Model 806 1963............................ 501 1964..........................4709 1965....................... 15946 1966....................... 24038 1967....................... 34943 Model 826 1969..........................7501 1970..........................8153 1971....................... 16352 Model 856 1967..........................7501 1968..........................9854 1969....................... 19554 1970....................... 28693 1971....................... 32420 Model 966 1971..........................7101 1972....................... 11815 1973....................... 17794 1974....................... 22526 1975....................... 28119 1976....................... 31772 Model 1026 1970..........................7501 1971..........................9707 Model 1066 1971..........................7101 1972....................... 12677 1973....................... 24205 1974....................... 34949 1975....................... 46855 1976....................... 56672 Model 1206 1965..........................7501 1966..........................8626 1967....................... 12731 Model 1466 1971..........................7101 1972....................... 10408 1973....................... 15533 1974....................... 19746 1975....................... 25404 1976....................... 29516 Model 1468 1971..........................7201 1972..........................7239 1973..........................9109 1974..........................9670 Model 1566 1974..........................7101 1975..........................7837 Model 1568 1974..........................7201 1975..........................7821 Farmall A, AV, B, BN serial number plate is located on the left side of seat support. Model A, AV, B & BN 1939............................ 501 1940..........................6744 1941....................... 41500 1942....................... 80739 1944....................... 96390 1945.....................113218 1946.....................146700 Note: Farmall A had two serial numbers in 1947, depending on where tractor was made: 1947 (Chicago)........... 182964 1947 (Louisville)........ 200001 Farmall Super A serial number is located on toolbox & seat support. Model Super A 1947.....................250001 1948.....................250082 1949.....................268196 215 IH/Farmall IH/Farmall Model I-130, F-130 1956............................ 501 1957..........................1120 1958..........................8363 Model I-1468, F-1468 1971..........................7201 1972..........................7239 1973..........................9109 1974..........................9670 1954.....................179412 1955.....................186441 1956.....................193658 1957.....................198231 1958.....................204389 1959.....................211441 1960.....................214974 1961.....................217382 1962.....................220038 1963.....................221383 1964.....................223453 1965.....................225110 1966.....................227209 1967.....................229225 1968.....................231005 1969.....................232981 1970.....................234868 1971.....................236827 1972.....................238506 1973.....................240581 1974.....................242746 1975.....................245651 1976.....................248618 1977.....................250832 1978.....................252109 1979.....................253136 IH/Farmall: Beginning serial numbers cont... 1950.....................281269 1951.....................300126 1952.....................324470 1953.....................336880 1954.....................353348 Model C 1948............................ 501 1949....................... 22624 1950....................... 47010 1951....................... 71880 Model F-12 1932............................ 501 1933............................ 526 1934..........................4881 1935....................... 17411 1936....................... 48660 1937....................... 81837 1938.....................117518 Model F-20 1932...............501 - 3000 1933............ 3001 - 6381 1934.................................... .......TA135000 - 135661 1935..........6381 - 32715 1936........32716 - 68748 1937..... 68749 - 105596 1938......105597 - 130864 1939......130865 - 134699 1940......135700 - 148810 Model F-30 1932...............501 - 1183 1933............ 1184 - 4304 1934............ 4305 - 5525 1935............ 5526 - 7031 1936..........7032 - 10406 1937........10407 - 18683 1938........18684 - 26848 1939........27186 - 28719 1940........29007 - 30026 Model H, HV serial number plate is located on the left hand clutch housing. Model H, HV 1939............................ 501 1940....................... 10653 1941....................... 52387 216 Model M, MD, MDV, MV 1939............................ 501 1940..........................7240 1941....................... 25371 1942....................... 50988 1943....................... 60011 1944....................... 67424 1945....................... 88085 1946.....................105564 1947.....................122823 1948.....................151708 1949.....................180514 1950.....................213579 1951.....................247518 1952.....................290923 Model M, MD, MDV, MTA, MV serial number plate is located on the left hand clutch housing. Model Super M, MD, MDV, MTA, MV 1952.......................... F501 1952 (Louisville)............. L500001 1953..................... F12516 1953 (Louisville)............. L501906 1954..................... F51977 1954 (Louisville)............. 512541 Regular, Fairway 1924............................ 501 1925............................ 701 1926..........................1539 1927..........................5969 1928....................... 15471 1929....................... 40370 1930....................... 75691 1931.....................117784 1932.....................131872 Model TD-40 1934..........................2501 1935..........................2785 1936..........................4393 1938..........................7719 1939..........................8599 McCORMICK O-4, OS-4, W4, I4, Super W-4 serial number plate is located on the left side of transmission housing. Model O-4, OS-4, W-4, I4 1940............................ 501 1941............................ 943 1942..........................4056 1943..........................5693 1944..........................7593 1945....................... 11171 1946....................... 13934 1947....................... 16022 1948....................... 18880 1949....................... 21912 1950....................... 24470 1951....................... 28167 1952....................... 31214 1953....................... 33067 Model Super W4 1953............................ 501 1954..........................2668 Model I-6, ID-6, I-9, ID-9 serial number name plate is located on left side of the clutch compartment cover. Model I-6, ID-6 1940............................ 501 1941..........................1225 1942..........................3718 1943..........................5057 1944..........................6371 1945..........................9518 1946....................... 14198 1947....................... 17317 1948....................... 24021 1949....................... 28868 1950....................... 35472 1951....................... 38518 1952....................... 44318 1953....................... 45274 Model O-6, ODS-6, OS-6, W-6, WD-6 serial number plate is located on the left side of clutch compartment cover. Model O-6, OS-6, OD-6, W-6, WD-6 1940............................ 501 1941..........................1225 1942..........................3718 1943..........................5057 1944..........................6313 1945..........................9496 1946....................... 14153 1947....................... 17792 1948....................... 22981 1949....................... 28704 1950....................... 33698 1951....................... 38518 1952....................... 44318 1953....................... 45274 Model W-9, WD-9 serial number plate is located on the left side of clutch compartment cover. Model W-9, WD-9, WDR-9, WR-9 1940............................ 501 1941............................ 578 1942..........................2993 1943..........................3651 1944..........................5394 1945....................... 11459 1946....................... 17289 1947....................... 22714 1948....................... 29207 1949....................... 36159 1950....................... 45551 1951....................... 51739 1952....................... 59407 1953....................... 64014 1954....................... 67969 Model I-9, ID-9 1940............................ 501 1941............................ 578 1942..........................3003 1943..........................3651 1944..........................5501 1945....................... 11459 1946....................... 17294 1947....................... 22715 1948....................... 29207 1949....................... 36350 1950....................... 45689 1951....................... 51739 1952....................... 59407 1953....................... 64014 Super W-6, W-6TA, WD-6 serial number plate is located on the left side of transmission housing. Model Super W6, W-6TA, WD-6 1952............................ 501 1953..........................2908 1954..........................8997 Model Super WD9, WDR-9 1953............................ 501 1954..........................1935 1955..........................5232 1956..........................6864 Model WR-9-S 1953............................ 501 1954............................ 550 1955............................ 722 1956............................ 755 1938..........................3799 Model W-14 1938..........................4134 1939..........................4610 Model W-40, WD-40 1935............................ 501 1936..........................1441 1937..........................5120 1938..........................7665 1939..........................9756 1940....................... 10323 Model 15-30 Gear Drive (Prefix "TG") 1921............................ 112 1922............................ 311 1923..........................1661 1924..........................6547 1925....................... 13868 1926....................... 26846 1927....................... 48647 1928........64401 - 99925 Model Late 15-30, 22-36 1929....................... 99926 1930.....................128237 1931.....................150128 1932...154508 - 156212 1934...156301 - 157477 Model W-30 1932............................ 501 1933............................ 522 1934............................ 548 1935..........................3182 1936..........................9723 1937....................... 15095 1938....................... 23834 1939....................... 29922 1940....................... 32482 Order # Price IHS961 $89.95 IHS145 $79.50 IHS145GK IHS633 IHS1223 $8.55 $48.50 IHS1227 $16.50 IHS153 $199.95 IHS153GK $7.50 IHS808 $34.95 Model W-12 1934............................ 503 1935..........................1356 1936..........................2031 1937..........................2768 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS136 Manifold fits: Farmall Cub up to SN: 248124 w/ engine up to SN: 312389; IH Cub LoBoy (1955-68) (All w/ IHC carburetor), Replaces: 251232R1 Manifold fits: Cub SN: 248124 & up, 154, 184, 185 (All w/ Zenith carburetor) Replaces: 251232R1, 405023R2 NOTE: Will also fit older Cubs when converting to Zenith carburetors. Price IHS139 $42.15 Vertical Exhaust Pipe fits: Same as IHS961, IHS145, Replaces: 350960R1 (1.304" O.D., 17" long) USA made IHS1621 $27.50 IHS001 $122.50 Gasket fits: Same as IHS153 Replaces: 24519DA USA made Exhaust Pipe w/ Flange Fits: Same as IHS153 Replaces: 41486DA, 41486DX (16 1/2" o/a length, 2-3/4" c.c. bolt hole) Gasket Set Fits: Same as IHS139; Also fits 10-20 manifold gasket only Replaces: 10413DA , 19906D (carb gasket) USA made Threaded Exhaust Pipe fits: Same as IHS139 (2-1/2" pipe thread (2-7/8" O.D.) x 18" long) NOTE: Customer must cut pipe to length. Manifold w/ IHS001 Exhaust Pipe Fits: A, B, C & Supers, 100, 200 Replaces: 251175R1, R11, R21 (1" O.D. exhaust port) Exhaust Manifold Clamp w/ Hardware (For Underslung Exhaust) fits: Cub, Cub LoBoy, Replaces: 362361R1 Manifold fits: F12, F14, I12, I14, O12, O14, W12, W14 gas Replaces: 3197D, 3196D Exhaust Pipe only fits: Sames as IHS003B, Replaces: 361384R1 (2" pipe threads, 2-1/4" O.D., 10-3/8" or longer) Manifold w/ Adapter fits: F30, W30 gas Replaces: 5167D, 5168D IHS139GK Exhaust Pipe Elbow (For Underslung Exhaust) fits: Cub, Cub LoBoy Replaces: 362359R1 Description / Application $234.50 Gasket Set fits: Same as IHS961, IHS145 Replaces: 251233R1,R2, 352540R92, 251235R1 (carb gasket) USA made IHS001EXP $10.95 Exhaust Pipe only fits: Same as IHS001 (1-1/2" pipe, approx. 8" length) IHS001GK $7.25 IHS002C $148.50 IHS295 $195.00 $259.95 Manifold fits: F20, T20 Crawler using gas style manifold IHS136 Replaces: HF122L IHS136GK Order # IHS003EXP $12.50 $17.85 McCORMICK DEERING Model O-12, O-14, Fairway 12 & 14 1934............................ 512 1935..........................1092 1936..........................1626 1937..........................2277 1938..........................3261 1939..........................3882 Description / Application $22.75 Gasket Set fits: Same as IHS136 Replaces: 10378D, 21250D, 19906D (carb) Gasket Set fits: Same as IHS001 Replaces: 352014R1 Gas Manifold w/ IHS003EXP Pipe Fits: H, Super H, I4, W4, (300, 350 gas Row-Crop), Replaces: 8033DCY, 8033DCX, 362536R21, 358064R11 NOTE: Carburetor mounting holes are slotted. High Performance Propane Manifold Fits: H, I4, W4 NOTE: Increases horsepower of your gas tractor. Use your stock carburetor. Manifolds, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 217 Engine parts Model F-14 1938.....................124000 1939.....................139607 Model Super H, HV 1953............................ 501 1954....................... 22202 Model T-20 1931............................ 501 1932............................ 551 1933..........................2053 1934..........................2528 1935..........................3276 1936..........................5387 1937..........................8501 1938....................... 12518 1939....................... 14550 Manifolds, parts cont... IH/Farmall IH/Farmall Model Super C 1951.....................100001 1952.....................131157 1953.....................159130 1954.....................187788 1942....................... 93237 1943.....................122590 1944.....................150251 1945.....................186123 1946.....................214820 1947.....................241143 1948.....................268991 1949.....................300876 1950.....................327975 1951.....................351923 1952.....................375861 1953.....................390500 Manifolds, parts Manifolds, parts cont... Manifolds, parts cont... Order # IHS002GK Price $7.95 IHS003EXP $12.50 $7.95 High Performance Propane Manifold Fits the following gas, LP: Super H, Super W4, 300, 350 Row-Crops Replaces: 363788R11 NOTE: Increases horsepower of your gas tractor. IHS003B $178.90 IHS003EXP $12.50 IHS659 218 $267.00 $52.85 $146.75 IHS567 Gas Manifold w/ Exhaust Pipe Fits: M, Super M, MTA, I6, T6, W6, Super W6, 400, W400, 450, W450 gas; Serviceable for OS6 Replaces: 8035DDX, 362437R21 $11.95 Exhaust Manifold Pipe Extension Fits the following diesels w/ 4-cyl.: MD, Super MD, Super MTA-D, ID6, TD6, WD6, ODS6, 400, 450, W400, W450, Replaces: 8328D, 361385R1 (2-3/8" O.D.; 6-7/8" o/a length) USA made Manifold (Threaded) fits: 130, 140, 230, 240, 330, 340, 404, 424, 444, 2404, 2424, 2444, T4, T5, T340, 500 Crawlers, (C-123 engine SN: 36001 & up), C-135, C-146, C-153, Replaces: 369645R22, 388584R21 (2-3/8" c.c. carb mounting holes, 1-3/16" O.D. exhaust ports) IHS935 $5.95 $21.50 IHS214GK $9.75 Order # Description / Application $144.95 Manifold fits: Some 454, 464, 574, 674, 2400A, 2400B, 2405B, 2410B, 2412B, 2500A, 2500B, 2505B, 2510B, 2514B, 3400A, 3500A w/ C-157, C-175, C-200 vertical exhaust, Replaces: 406046R1 (2" pipe thread outlet) NOTE: Exhaust outlet is offset not centered. For exhaust pipe order IHS1619 & cut to length. IHS137GK $26.50 IHS138 $167.05 Manifold fits: 504, 2504, some 3514 w/ C-153 gas engine vertical & horizontal exhaust Replaces: 377179R11 IHS138GK $8.60 Gasket Set fits: Same as IHS138 Replaces: 352014R2, 31336D, 530681R2 (carb gasket) IHS138ELB $29.95 Exhaust Elbow Gasket (For IHS567) Replaces: 362299R1, 1349062C1 USA made Extension Pipe fits the following w/ BD144, BD154 diesels: B250, B275, 276, 354, 364, 384, B414, 424, 434, 2300A, 2424, 3414, 3444, 7000 Forklift, TD5 Dozer; Will also fit 444, 2444 if pipe is lengthened, Replaces: 704614R1, 3072544R1, 704613R1 (1-55/64" O.D., 5.600" o/a length, 3.225" c.c. bolt pattern) Gasket Set fits the following w/ BD144, BD154 C.I. diesels: B250, B275, 276, 354, 364, 384, B414, 424, 434, 444, 2300A, 2424, 3414, 3444, 7000 Forklift, TD5 Dozer, Replaces: 704165R2 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price $18.50 Manifold Heat Control Weight only Fits the following gas: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, Replaces: 85699R1 NOTE: Made of durable cast iron, this IH manifold heat control weight is sure to last. IHS3353 $24.50 NEW! Manifold Heat Control Spring Fits: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856 gas Replaces: 82958R2 IHS1236 $38.95 Offset Exhaust Manifold Adapter Fits the following gas: 460, 560, 606, 660, 2606; IH C-221, C-263, C282 gas motors (2" NPT adaptor to fit IHS004) NOTE: Use w/ IHS963 or IHS004 exhaust manifolds & IHS1619 pipe. IHS2577 $38.95 Offset Exhaust Manifold Adapter Fits: 656, 2656 gas w/ vertical exhaust (2" NPT adapter to fit IHS004) NOTE: Use w/ IHS963 or IHS004 exhaust manifolds & IHS1619 pipe. IHS2585 $5.50 Offset Manifold Adapter Gasket Fits: Same as IHS1236, IHS2577 Replaces: 369282R2 (5" o/a length, 4-1/16" c.c. bolt holes, 1/2" bolt holes, 2-1/4" center hole I.D.) USA made IHS004GK $25.50 Gasket Set fits: Same as IHS004, IHS154, IHS1236, IHS2577 Replaces: 400878R1,R2, 85868R1,R2, 530681R1,R2 (carb gasket) USA made IHS1619 $24.95 Threaded Exhaust Pipe fits the following gas, LP, diesel: F460, F560, 656; Gas, LP: 454, 574, 674, 544, 606; D282 diesel: 660, 706 Replaces: 366780R1, 369613R1, 370643R1 (2" x 17-3/4" long) NOTE: Must use IHS1236 adaptor if purchasing IHS004 manifold. IHS2525 $14.95 Intake Manifold Pilot (Ferrule) Fits: 460, 606, (Early 560, 660 up to engine SN: 7087) gas, LP Replaces: 98573HA (1.620" O.D.) USA made NOTE: Measure diameter before ordering. 2 used per engine; Sold individually. IHS2533 $18.95 Intake Manifold Pilot (Ferrule) Fits the following w/ engine C263 SN: 7088 & up: 560, 656, 660, 706 gas, LP; Fits the following w/ engine C291 & C301: 666, 686, 706, 756, 766, 806, 826, 856 gas, LP, Replaces: 138733R1 (1.630" step to 1.690" O.D.) NOTE: Measure diameter before ordering. 2 used per engine; Sold individually. Exhaust Elbow fits: Same as IHS138 Replaces: 377947R1 Manifold fits: I9, T9, U9, W9, WR9, 600, 650 gas, Replaces: 8321DBX IHS140GK $33.15 IHS1621 $27.50 IHS963 (2-piece) $382.50 IHS154 (Intake) IHS004 (Exhaust) Gasket Set fits: Same as IHS140 Replaces: 52755DA, 31336D (carb gasket) USA made Threaded Exhaust Pipe fits: Same as IHS140, IHS004, IHS963 Replaces: 383974R2 (2-1/2" pipe thread (2-7/8" O.D.) x 18" long) NOTE: Customer must cut pipe to length. Manifold fits the following gas: 666, 686, 706, 756, 766, 806, 826, 856; Hydros: 70, 86; Industrials: 3800, 3850; Will also fit following w/ gas by purchasing IHS1236 Adaptor: 460, 560, 606, 660, 3616 Industrial, Will also fit 656 by $199.50 purchasing IHS2577 Adaptor IHS963 Replaces: 384290R2, 367261R1, (368550R11, 390988R2 by ordering corresponding adaptors) IHS154 Replaces: 367261R11 IHS004 Replaces: 384290R21; Casting $188.50 #'s 384290R1, 390988R1 (2 1/2" NPT pipe threads) NOTE: The heat exchanger is preassembled for both the IHS963 & IHS154 manifolds. Description / Application IHS965 Gasket Set fits: Same as IHS137 USA made $238.95 Gasket Set fits: Same as IHS191 Replaces: 352014R2 (manifold gasket), 25520D (carb gasket) Exhaust Elbow fits: 300 Utility gas, 350 Utility gas, Replaces: 362298R1 IHS796 Price IHS137 IHS140 $75.00 Exhaust Pipe only fits: Sames as IHS003B, Replaces: 361384R1 (2" pipe threads, 2-1/4" O.D., 10-3/8" or longer) Propane Manifold fits: M, Super M, MTA, I6, T6, W6, Super W6, 400, W400, 450, W450 gas; Serviceable for OS6 Replaces: 358308R11 NOTE: 1-piece like the OEM IH manifold. Will increase horsepower on gas tractors. Gasket Set fits: Same as IHS003B, IHS659, Replaces: 46173DC, 21632D (carb gasket); 530681R2 (carb gasket) Exhaust Pipe only fits: Same as IHS191 (1-1/2" pipe, approx. 8" length) IHS191GK Exhaust Pipe (2-Bolt Flanged) Fits the following w/ distillate manifolds: H, HV, W4, I4, Super H, Super HV, Super W4, Replaces: 6713D (5" c.c. bolt holes) Description / Application IHS001EXP $10.95 Gasket Set fits: Same as IHS1244 Replaces: 45197DD (gasket); 24520D (H carb gasket); 21632D (300 carb gasket) (2-11/16" c.c. carb holes, 3/8" stud dia.) Exhaust Pipe only fits: Same as IHS1244, Replaces: 361384R1 (2" pipe threads, 2-1/4" O.D., 10-3/8" or longer) $69.95 IHS845 IHS191 IHS003EXP $12.50 IHS779 $7.75 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Engine parts Engine parts IHS002GK $195.00 Exhaust Pipe only Fits: Same as IHS003EXP, IHS295 Replaces: 361384R1 (2" pipe threads, 2-1/4" O.D., 10-3/8" or longer) Price IHS003GK Manifolds, parts cont... IH/Farmall IH/Farmall IHS1244 Order # Description / Application Gasket Set fits: Same as IHS002C, IHS295, Replaces: 45197DD (gasket); 24520D (H carb gasket); 21632D (300 carb gasket) (2-3/8" c.c. carb holes, 5/16" stud dia.) NOTE: Does not include exhaust elbow gasket for Utility tractors. Manifolds, parts cont... Manifolds, parts continue on next page 219 Manifolds, parts cont... Order # IHS932 IHS2529 $117.85 IHS932GK $34.50 IHS929 ABC2511 IHS146 $235.65 $21.95 $3.95 Order # Exhaust Manifold Center Section Fits the following naturally aspirated diesels: 806, 856, 2806, 2856; Combine: Early 815 (w/ D361 or D407 series engines), Replaces: 326699R1 IHS147 Rear Exhaust Manifold fits: 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3488, 3588, 3688, 3788, 4166, 4186, 4366, 4386, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 100, Hydro 186, 815, 915, 1440, 1460, 1470, 1480 Combines: All w/ D & DT 414, 436, 466 engines Replaces: 675779C1 Front Turbo Exhaust Manifold Fits: 1066, 1086, 1466, 1486, 1566, 1586, 3388, 3588, 3788, 4166, 4186, 4366, 4386, 6388, 6588, 6788; Combines: 915, 1460, 1470, 1480, Turbo charged engine: DT414, DT436, DT466 Replaces: 683564C91, 683562C1 7-Piece Gasket Set (For IHS930, IHS929) Replaces: 362299R1, 670073C1, 688928C1, 1342826C1, 1349062C1 NOTE: 1 set used per engine. Turbocharger to Exhaust Manifold Mounting Gasket fits: 1066 thru 7488 Replaces: 670073C1 USA made NOTE: See website for full applications. Make your own gasket with our gasket material. Made in the USA! Order # Price ABC448 $17.90 ABC1830 $13.95 ABC1835 $10.95 ABC1844 ABC1846 IHS160 220 $37.75 $8.95 Sleeve / donut fits: 1066, 1466, 1566, 4166 thru 4386, Replaces: 675317C2 NOTE: For IHS146 exhaust elbow. Sealing Rings fits: 1066, 1466, 1566, 4166 thru 4386, Replaces: 702299C2 NOTE: For IHS159 sleeve. 2 required per sleeve; Sold individually. Description / Application Exhaust Manifold Gasket Material (1/16" thick x 12" wide x 28-1/2" long) NOTE: Perforated steel core. Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (1/16" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. Order # Price IHS2284 Price $1.00 Manifold High Nut fits: A, B, C, Supers, (Early H up to SN: 106907), Cub, (M up to SN: 41345), 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, Early 340 gas Replaces: 251176R1, 93082H (3/8 - 24 NF, .535" tall, 9/16" hex) NOTE: Zinc plated. Sold Individually. Cubs use 4 all others use 6. Early H - M used 3/8 NF, Late H - M used 7/16. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $1.95 1/2" Manifold Washer fits the following using 7/16" NF Nut: Late H SN: 106907 & up, M SN: 41346 & up, Supers gas, LP, diesel; I, O, T, W4, W6 series, Supers; 300 thru 450, 666 diesel thru 1566 using D312, D360, D414, D436, D466 engines; 3388 thru 7488 USA made NOTE: See website for full application. Sold individually. Early H & M used 3/8" NF & Late H & M used 7/16" NF. IHS1293 $3.50 Carburetor to Manifold Hardware Kit & Vacuum Plug fits: H, W4, O4 ((2) 5/16" x 1-1/2" studs, (2) 5/16" UNF nuts, (2) 5/16" lockwashers, (1) 1/8" NPT plug) IHS1296 $3.95 Carburetor to Manifold Hardware Kit Fits: Super H, Super W4, 300, 350 ((2) 3/8" x 1-1/2" studs, (2) 3/8" UNF nuts, (2) 3/8" lockwashers, (1) 1/8" NPT plug) IHS2288 $1.00 Manifold High Nut fits: Late H SN: 106907 & up, M SN: 41346 & up, Supers gas, LP, diesel; I, O, T, W4, W6 series, Supers; 300 thru 450, 666 diesel thru 1566 using D312, D360, D414, D436, D466 engines; 3388 thru 7488 Replaces: 43715D, 37684H, 63460D, 260872R1, 682987C1 (7/16"-20 NF, .595" tall, 5/8" hex) NOTE: See website for full application. Sold individually. Early H & M used 3/8" NF & Late H, M used 7/16" NF. Gasket Paper for making general purpose gaskets (0.0160" thick x 18" wide x 98" long) NOTE: Do not use for high temperature applications. Description / Application ABC2310 3/8" Manifold Washer fits: A, B, C, Supers, (Early H up to SN: 106907), Cub, (M up to SN: 41345), 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, Early 340 gas Replaces: 24523D USA made NOTE: Sold individually. 4 used on Cub, 6 used on all others. Early H - M used 3/8" NF & Late H - M used 7/16". Measure old rings before ordering. Do not order by tractor model only. To ensure you order the correct rings, you will need the following information: Manifold hardware Order # $1.95 Tips on ordering an engine piston ring set: $22.95 Description / Application ABC2308 Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (3/32" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. Gasket Paper for making general purpose gaskets (0.0275" thick x 20" wide x 108" long) NOTE: Do not use for high temperature applications. Order # IHS159 $15.95 $74.50 Exhaust Elbow fits: 1066, 1466, 1566, 4166, 4366, 4186, 4386 Replaces: 675316C2 Description / Application Exhaust Elbow fits: 1026, 1256, 1456 & Industrial, Replaces: 670034C1 Manifold, Diesel Exhaust End Section Fits: 806, 856, 2806, 2856 Replaces: 326521R1 6-piece Exhaust Manifold Gasket Set Fits following naturally aspirated diesels: 806, 856, 2806, 2856; Early 815 Combine w/ D361 or D407 series engines; H65C Loader, L175B Crawler Replaces: 326523R1, 188275A1 Price $118.50 Manifold hardware cont... 1 Bore size 2 Thickness of each ring 3 Quantity of each ring thickness per piston Piston rings can not be returned if opened. Call or email for price and availability of other sizes. Price Description / Application Piston ring sets - USA made Order # Price Engine parts IHS1634 $135.00 Description / Application Manifold hardware cont... IH/Farmall IH/Farmall IHS930 Engine parts Price $180.75 Manifolds, parts cont... Application Fits: Some Cub, Cub LoBoy, 154, 184, 185, UC60 Power Units 4-cyl. (All w/ C60 engine) IHS2104 Replaces: 357674R93, 539354R1 IHS2106 Replaces: 357675R93, 539355R1 IHS2108 Replaces: 364859R93, 539357R1 IHS2104 $55.10 IHS2104: 2-5/8" bore, (2) 0.093" compression rings, (1) 0.187" oil ring IHS2106 $52.25 IHS2106: 2.645" bore, 0.020" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring IHS2108 $52.65 IHS2108: 2.665" bore, 0.040" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring Fits: Some Late F12, F14 w/ 4 ring pistons; A, Early Super A, B, BN, C 4-cyl. ABC2110 Replaces: 69791D, 357677R93 NOTE: Some F12, F14 engines had 5 groove pistons, the 5th groove NEVER had a ring from the factory). ABC2184 $117.75 ABC2184: 3" bore, (3) 0.125" compression rings, (1) 0.250" oil ring ABC2110 $97.15 ABC2110: 3" bore, (3) 0.125" compression rings, (1) 0.187" oil ring Fits: Some A, B, C, Supers, 100, 130, 140, 200, 230, 240 4-cyl. IHS2114 Replaces: 357679R93 ABC2112 $121.80 ABC2112: 3-1/8" bore/overbore, (3) 0.093" compression rings, (1) 0.250" oil rings IHS2114 $75.70 IHS2114: 3-1/8" overbore, (3) 0.125" compression rings, (1) 0.250" oil ring Fits: Some H, HV, I4, O4, OS4, U4, W4 4-cyl. IHS2116 Replaces: 359668R93 IHS2116 $115.95 IHS2116: 3-3/8" standard bore, (1) 0.125" & (2) 0.156" compression rings, (1) 0.250" oil ring ABC2072 $126.85 ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (1) 0.1875" Piston ring sets continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 221 Base engine kit Fits: 'Some' C, Super A, Super C, 100, 130, 140, 200, 230, 240 w/ C113 engine SN: 310300 & up & C123 engine SN: 35830 & up (3.250" overbore, flat top pistons, 3.43" lower sleeve seal O.D.) Piston ring sets - USA made cont... Order # Price Application Fits: Some M, MV, I6, O6, Super M, Super MTA, W6, 400 gas, LP Replaces: 357683R91 ABC2082 $79.50 Engine overhaul kits: ABC2082: 4" bore, (3) 0.093" compression rings, (1) 0.250" oil ring Fits: Some Super M, MTA, Super W6, 400, 450 4-cyl. gas, LP ABC2090 Replaces: 366493R93 ABC2078 $135.65 ABC2078: 4-1/8" bore, (2) 0.093" & (1) 0.125" compression rings, (1) 0.250" oil ring ABC2090 $78.50 ABC2090: 4-1/8" bore, (2) 0.093" compression rings, (1) 0.250" oil ring Fits: Some B250, B275, B276, B414, 354, 364, 384, 424, 434, 444, (454 gas), 3414 4-cyl. w/ BC144, BD144, BD154, C146 & C157 engines ABC2170: 3-3/8" bore, (3) 0.093" compression rings, (1) 0.1875" oil ring Sleeve sealing o-rings USA made Order # IHS2117 IHS2121 Price Engine gasket sets $5.50 Order # Price IHS1324 $82.75 $5.95 ring sets, piston pins, pin retainers & sleeve sealing rings. Most other sets available by special order. Order # IHS3060 Price Application $328.75 Fits: Some A, B, C, Supers, 100, 130, 140, 200, 230, 240 w/ C113 up to engine SN: 310300 & C123 up to engine SN: 35830; Also fits F12, F14 w/ IH engine Replaces: 378277R91 (3.125" overbore, flat top aluminum pistons, 3.30" lower sleeve seal O.D.) NOTE: Fits block casting #3193D, 4818D, 6342D, 6342DB, 6342DE, 6342DG, 6342DH, 251069R1, 366204R1, 366204R2, 367825R1. (For 1 cylinder) fits: Some A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, Replaces: 354881R1, 367799R1 (0.230" thick) NOTE: Includes (1) o-ring for 1 sleeve. Must be used w/ engines w/ 3.43" lower sleeve dia. IHS3064 $268.50 Rebore kits for Cub, Cub LoBoy (both up to engine SN: 264567) NOTE: Includes aluminum flat top pistons, rings, wrist pins, retaining clips. Order # Price Application IHS3235 $188.50 NEW! (0.020" overbore) Replaces: 352183R94 (2.645" bore size) IHS3238 $188.50 NEW! (0.030" overbore) (2.655" bore size) IHS3242 $188.50 NEW! (0.040" overbore) Replaces: 364856R94 (2.665" bore size) IHS3246 $188.50 NEW! (0.060" overbore) (2.685" bore size) 222 Fits: Some Super A, C, Super C, 100, 130, 140, 200, 230, 240 w/ C113 engine SN: 310300 & up, C123 engine SN: 35830 & up, Replaces: 374493R93 (3.250" overbore, stepped head aluminum piston, 3.43" lower sleeve seal O.D.) NOTE: Fits block casting 354898R1, R2, 366825R1 & others using 3.43" lower sleeve seal O.D. IHS3093 $349.50 Fits: H, I4, O4, W4 gas w/ C-152 engine Replaces: 374312R93, PK156 (3.4375" overbore, stepped head aluminum pistons) IHS3096 $463.20 Fits: M, I6, O6, T6, W6 w/ C-248 gas engine, Replaces: 374264R91, PK155 (4" overbore, stepped head aluminum pistons) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS1332 $171.40 seal) for major overhaul. NOTE: Includes sleeves, pistons, piston (For 1 cylinder) fits: Some A, B, C, Supers, F12, F14, 100, 130, 140, 200, 230, 240, Replaces: 24434D (0.220" thick) NOTE: Includes (1) o-ring for 1 sleeve. Must be used w/ engines w/ 3.30" lower sleeve dia. $149.55 NOTE: Includes all gaskets & crankshaft seals (except governor Sleeve & piston kits Application IHS1330 Price NEW! Base Engine Kit........................................ IHS3374.........$338.50 NOTE: Fits block cast 354898R1, R2, 366825R1 & others using 3.43" lower sleeve seal O.D. Order rod & main bearings separate to make an out-of-frame kit. Verify block casting number before ordering. NOTE: For 1 cylinder. Measure before ordering. Price $68.50 IHS1318 Application Fits the following w/ C-60: Cub, Cub LoBoy, 154, 184, 185 Replaces: 352539R91, 352540R91, 355733R96 USA made NOTE: Governor seal NOT included. Rear seal must be used w/ late 251363R2 retainer, will not fit tight in early 251363R1 retainer. For engines w/ early R1 retainer you must either switch to late R2 retainer or use locktite 660 or similar to retain seal. $136.75 Fits: F12, F14, I12, O12, O14, W12, W14 USA made Application Fits: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) w/ BD144, BD154 diesel engines SN: 26077 & up Replaces: 3041249R93 Fits: H, HV, I4, O4, OS4, W4 Replaces: 55620D, 55620DC, 53888D, 354475R95, 381729R93 NOTE: Governor seal NOT included. Fits: M & Supers, MTA, I, O, W6 series, 400, 450 gas, LP, Replaces: 55621D, 55621DA, 55621DC, 355013R91, 369958R91 NOTE: Governor seal NOT included. Lower end engine gasket set Fits the following diesels w/ D248, D264 D281: MD, MDV, Supers; Super MTA diesel, ODS6, TD6, TD6-61, ID6, WD6, Super; W6TA, 400, 450, W400, W450 Replaces: 332653R92 USA made Description Order # Engine parts Engine parts $64.50 Order # Order # IHS3083 Price Lower End Engine Gasket Set w/ Seal............ IHS1858.........$319.95 NOTE: To make a complete gasket set order IHS1858 & IHS1855 valve grind set. Cylinder heads, parts IHS1316 Order # $144.95 Fits: Regular, F20 NOTE: No front cover/ side cover gaskets. IHS1326 $64.95 Fits: A, B, C, Super A up to SN: 255417 (All w/ engines 3" to 3-3/8" bore & w/ out water pump) USA made NOTE: Governor seal NOT included. IHS1328 $92.50 Fits: Super A SN 255418 & up, Super C, 100, 130, 140, 200, 230, 240, 330, 340 gas, T4 (All w/ 3-1/8" to 3-1/2" bore models equipped w/ a water pump); For use on all models w/ C-113 engines equipped w/ a water pump C-123 & C-135 up to engine SN 100500, Replaces: 356314R92, 356314R96, 362880R91, 367705R92, 381734R92 NOTE: Governor seal NOT included. 80% USA content. IHS005 Price Description / Application $214.99 Cylinder Head fits: Cub, 154; 184, 185 w/ Casting 355691R2 Replaces: 251228R1, 351779R91 IHS2225 $936.60 IHS2721 $12.50 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com IH/Farmall IH/Farmall ABC2170 Inframe or out of frame kits are available by special order for Cub, A, B, C, H, M, MTA & Supers (gas only) 100 thru 7488. For price and availability call or visit Special Order Parts under Shop Online on our website. Description Engine gasket sets cont... IH 450 'LP' High Compression Cylinder Head w/ guides & seats fits: M, Supers, MTA, I, O, T, W6 series, 400, 450 gas, LP Replaces: 364586R1, 364586R11 NOTE: Must use w/ IHS2227 valve train kit. Customer is responsible for ALL final machining. Will bolt directly onto a gas engine for increased horse power. Cylinder Head Stud fits: H, Supers, I, O, W4, Super W4, 300, 350 gas, LP (11 used per engine), Replaces: 45009D (7/16" dia. x 5-15/16" long; 4340 heat treated steel, grade 5) USA made NOTE: Sold individually. Cylinder heads, parts continue on next page 223 Cylinder heads, parts cont... Order # IHS2717 IHS2723 IHS2719 $13.20 $2.25 $1.75 Order # Cylinder Head Stud fits: H, Supers, I, O, W4, Super W4, 300, 350 gas, LP (5 used per engine), Replaces: 48939DA (7/16" dia. x 6-1/8" long; 4340 heat treated steel, grade 5) USA made NOTE: Sold individually. Cylinder Head Stud fits: M, I, O, W6, Supers, MTA, T6, 400, 450 gas, LP (4 used per engine), Also used for D206 engine applications (11 used per engine) Replaces: 49023DA (1/2" dia. x 7-1/16" long; 4340 heat treated steel, grade 8) USA made NOTE: Sold individually. See website for all applications. Cylinder Head Stud fits: M, I, O, W6, Supers, MTA, T6, 400, 450 gas, LP (12 used per engine), Replaces: 46117D (1/2" dia. x 6-7/8" long; grade 8, 4340 heat treated steel) USA made NOTE: Sold individually. Application Order # Price Application IHS658 $36.95 Fits: A, Super A, AV, Super AV, B, BN, C, Replaces: 354474R95 USA made NOTE: For engines w/ 3" - 3-1/8" bore and without water pump. Does not include valve stem seals. IHS2383 $99.50 $148.50 IHS840 $50.30 Fits: Super A, Super C, Super A1, Super AV1 SN: 310300 & up, T4, T5, 100, 130, 140, 200, 230, 240, 330, 340 (All w/ C-113, C-123, (C-135" up to SN: 100500) engines & w/ water pump), Replaces: 357476R95 USA made NOTE: Does not include valve stem seals. Fits: I9, T9, W9, Super W9, WR9S, 600, 650, (UC335 & UC350 Power Units) (All gas, LP), Replaces: 354477R91, 354477R92 USA made NOTE: Copper jacketed head gasket. IHS3315 IHS1669 $98.50 Fits the following gas, LP w/ C-221, C-263, C-282, C-291, C-301: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856; Hydros: 70, 86 Replaces: 173141R93, 372770R95, R96, R97 USA made NOTE: Copper jacketed head gasket. IHS1665 $42.50 Fits: T340 w/ C135 SN: 100500 & up: 404, 424, 444, 500 w/C146, 504, 2404, 2424, 2444, 2504, 3514; C146, C153 gas, LP; Combines: 93, 105, 122, 203 gas USA made NOTE: For engines using 14 head bolts/studs. IHS1692 $119.95 Fits the following diesels w/ D-236, D-282, D-301: 460, 560, 606, 656, 660, (706 w/ D-282), Replaces: 134403A1, 310446R95 NEW! (For engines w/ exhaust rotators) fits: 'Some' C, Super C, 130, 140, 230, 240, 330, 340, 404, 424, 444, 504 gas (All w/ cylinder head casting #'s 251172R1, 366299R1, 393508R1), Replaces: (4) 366302R2 (intake valves), (4) - 366303R4 (exhaust valves), (4) - 406723R1 (intake springs), (4) - 368450R1 (exhaust springs), (8) - 356583R21 (guides), (8) - 386192R1 (seals), (8) - 42026D (keepers (locks) (Intake valve length: 5.28" long, head dia.: 1.500"; Exhaust valve length: 5.28", head dia.: 1.312"; Intake spring length: 2.400"; Exhaust spring length: 2.330") NOTE: Measure valves BEFORE ordering as there were 4 different lengths used. Includes stem seals, Does not include retainers. IHS3318 $117.00 NEW! (For engines w/ exhaust rotators) fits: 'Some' H, HV, (I4 SN: 4113 & up), O4, OS4, Super H, Super W4, W4 (All using gas cylinder head casting #'s 8043D, 8043DB, 8043DC), Replaces: (4) - 50706DA (intake valves), (4) - 50707DA (exhaust valves), (8) - 24544DA (springs), (8) 8049DR (guides), (8) - 386192R1 (seals), (8) - 42026D (keepers, locks) (Intake valve length: 5.360"; Exhaust valve length: 5.360"; Valve spring length: 2.70") NOTE: Measure valve length before ordering as 3 different lengths were used. Includes stem seals, Does not include retainers. IHS3321 $128.50 NEW! (For engines w/ valve rotators) fits: 'Some' M, O6, OS6, Super M, Super MTA, Super W6, W6, W6TA gas (All w/ cylinder head casting #'s 8060, 8574 (D, DB, DC, DD), Replaces: (4) - 50731DA (intake valves), (4) - 50732DA (exhaust valves), (8) - 3566951 (springs), (8) 8044DR (guides), (8) - 279299R1 (seals), (8) - 41339D (keepers, locks) (Intake valve length: 5.85", Exhaust valve length: 5.85", Valve spring length: 2.675") NOTE: Measure valve length before ordering (3 different lengths used). Includes stem seals, Does not include retainers. IHS3324 $192.00 IHS3085 Price $44.95 Cylinder Head Stud Nut fits: A, B, C, Supers, F12, F14, 100 thru 240 (9 used); F20, Regular, T20 (15 used); M, Supers, MTA, I, O, T, W6, Supers, 400, 450 gas, LP (16 used); F30, W30, 10-20 (17 used) Replaces: 4097DA, 25527R1, 329-118 (1/2" - 20 NF, grade 8) USA made NOTE: Sold individually. IHS811 Cylinder Head Stud Nut fits: H, Supers, I, O, W4, Super W4, 300, 350 gas, LP Replaces: 1763Y (7/16" - 20 NF, grade 8) USA made NOTE: 16 used per engine; Sold individually. IHS3356 $67.95 IHS807 $75.95 Valve grind gasket sets NOTE: Unless specified sets include all gaskets required when $112.50 replacing the cylinder head. Order # IHS888 Price Application $117.30 Fits: F20 - T20, Regular IHS005VGK IHS1855 $39.95 Fits: Cub, 154; Also Fits 184, 185 except for the carburetor mounting gasket Replaces: 352540R91 224 $242.75 Application Fits: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) (All w/ BD144, BD154 diesel engines) Replaces: 706105R93 NOTE: Copper head gasket. Fits the following gas, LP w/ C-152, C-164, C-169, C-175: H & Supers, I, O, W4 series, 300, 350 Replaces: 354475R94 NOTE: Includes a premium metal jacketed head gasket. Order # Price Valve train kits cont... Valve train kits NOTE: For valve train kits not listed please call. Order # Price Application IHS2131 $134.95 Fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: (4) - 251260R1 (intake valves), (8) - 251262R2 (valve springs), (4) 251261R2 (exhaust valves), (8) - 352973R3 (valve guides), (16) - 46209D (valve keepers) NOTE: Does not include retainers. IHS3306 $134.95 NEW! (For engines w/out exhaust rotators) fits: 'Some' A, B, BN, (Super A up to SN: 255417) Fits cylinder head # 6716D, 9052D, Replaces: (4) 42024D intake valves, (4) 42025D exhaust valves, (8) 24544DA springs, (8) 356583R21 guides, (8) 386192R1 seals, (8) 42026D keepers (locks) (Intake valve length: 4.83" long, head dia.: 1.34"; Exhaust valve length: 4.83", head dia.: 1.22"; Valve spring length: 2.70".) NOTE: Measure valves BEFORE ordering as there were 4 different lengths used. Includes stem seals. Does not include retainers. NEW! Economy Valve Grind Gasket Set fits: Same as IHS811, but has graphite coated head gasket. Replaces: 354475R94 USA made NOTE: Includes a graphite coated head gasket. Fits the following gas, LP w/ C-248, C-264, C-281: M & Supers, 400, 450, I, O, T, W6 series, Replaces: 354476R95 USA made NOTE: This includes the premium metal jacketed head gasket. Fits the following diesels w/ D264, D281: (MD, MDV when both are updated to D264), Super MD, Super MDV, Super MTA diesel, ODS6, TD6, TD6-61, ID6, WD6, Super WD6, W6TA, 400, 450, W400, W450 Replaces: 53436DE, 261339R92 USA made NOTE: This is for engines w/ sleeves that protrude above the block. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS3311 $128.00 NEW! (For engines w/out exhaust rotators) fits: 'Some' Super A, Super AV both SN: 255418 - 310299, C, Super C, 100, 200 (All w/ cylinder head casting #'s 355046R1, 355046R2), Replaces: (4) 57797D (intake valves), (4) 57798D (exhaust valves), (8) 24544DA (springs), (8) 356583R21 (guides), (8) 386192R1 (seals), (8) 42026D (keepers/locks) (Intake valve length: 4.94" long, head dia.: 1.34"; Exhaust valve length: 4.94", head dia.: 1.16"; Valve spring length: 2.70") NOTE: Measure valves before ordering as there were 4 different lengths used. Includes stem seals, Does not include retainers. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Fits: 400, 450, W400, W450 gas (All w/ cylinder head casting #'s 362174, 362433, 362920 (R1, R2) (Intake & Exhaust valve length: 6.06"; Valve spring length: 2.675") NOTE: Includes stem seals, Does not include retainers. Valve train kits continue on next page 225 Engine parts Engine parts IHS2725 $13.50 Description / Application Valve grind gasket sets cont... IH/Farmall IH/Farmall IHS2727 Price $12.95 Valve grind gasket sets cont... Valve train kits cont... cont... Order # Price Application IHS3347 $222.50 NEW! Fits: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 & Industrial using C221, C263, C282, C291, C301 gas, LP engines (Intake valve length: 5.072", head dia.: 1.781", Exhaust valve length: 5.053", head dia.: 1.516", Spring length: 2.438") NOTE: Includes stem seals, Does not include retainers. See website for all applications. $306.95 'LP' High Compression Valve Train Kit Fits: M, Supers, MTA, I, O, T, W6 series, 400, 450 (All w/ LP cylinder head) Replaces: 364589R1, 364590R1, 356951R1, 41339D, 41349D, 47277D, 61479HA NOTE: Includes intake & exhaust valves, springs, retainers, valve locks, stem retainer clips (does not include roto caps or guides). This kit is needed when switching from a gas cylinder head. Customer must grind valves to match seats & size the guides to the valves. Order # Order # Price $12.10 Valve Cover Gasket only fits: A, B, C & IHS865 $14.55 Valve Cover Gasket only fits: H & IHS871 IHS2609 IHS1687 Order # IHS2401 IHS2414 Price $22.50 Supers, 300, 350 gas, I, O, W4 series Replaces: 43976DC USA made $18.75 following gas, LP: M, Supers, MTA, I, O, T, W6 series, 400, 450, Replaces: 45952DC USA made $9.85 Fits: 460, 560, 606, 656, 660, 706 all gas, LP, diesel (no German diesel); 454, 464, 544, 574, 666, 674, 756, 806, 826, 856 all gas, LP; 340 diesel, 504 diesel only; Also fits Combines/Industrials Replaces: 164436R91 (12.684" o/a length, 0.375" O.D.) Valve cover, push rod side cover gaskets $14.55 Valve Cover Gasket only fits the following gas, LP w/ C-221, C-263, C-282, C-291, C-301: 460, 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856; Hydros: 70, 86, Replaces: 164421R1, 369983R2 USA made Order # IHS2597 IHS2605 226 Price $12.50 $12.50 IHS1680 $16.00 Valve Cover Gasket only w/ Copper IHS2004 $14.95 Valve Cover Gasket only fits: 966 - 4366, Valve Cover Gasket only fits: F12, F14, I12, O12, O14, W12, W14 Replaces: 24552D, 54490D USA made Valve Cover Gasket only fits: F20, T20, Regular, Replaces: 29760D, 60410D USA made 986 - 4386, 3388 - 7488; Combines & Industrials using D414, DT414, D436, DT436, DT466 engines Replaces: 1342828C1 $8.50 IHS1704 $12.95 Pushrod Side Cover Gasket fits the Valve Tappet Side Cover Gasket Fits: Cub, Cub Loboy, 154, 184, 185 Replaces: 251371R1 USA made IHS1684 IHS1555 Camshaft Gear fits the following gas, LP: H, HV, I, O, W4 series & Supers, 300, 350 Replaces: 6664DB, 6664DA, 6664D USA made NOTE: 48 teeth. IHS1560 Camshaft Gear fits the following gas, LP: M, MV & Supers, MTA, I, O, W, T6, 400, 450, Replaces: 6760DB, 6760D USA made NOTE: 58 teeth. IHS2048 IHS2739 following gas w/ C-221, C-263, C-282, C-291, C-301, D-236, D-282, D-301: 460, 560, 606, 656, 660, 666, 686, (706 gas, diesel, D-282); Fits the following gas, LP: 756, 766, 806, 826, 856 Hydros: 70, 86 Replaces: 369982R1, 69735R1 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS211 $295.00 IHS019 $44.50 $137.95 Camshaft Gear fits: 340 diesel, 504 diesel, (454, 464, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP), (460, 560, 606, 656, 660 gas, LP, diesel), 706 gas, LP, D282 diesel Replaces: 367240R1, 312500R1 USA made NOTE: 54 teeth IHS020 Crankshaft Pulley fits: A, B, C, Supers, 100, 130, 200, 230, Replaces: 6502DB NOTE: For seal use IHS1307. IHS901 $59.95 IHS2044 $64.95 $37.50 $36.50 4-piece Camshaft Bearing / Bushing Set Fits: 340 diesel, 504 diesel, (460, 560, 606, 656, 660, 706 gas, LP, diesel, no German diesels), 666, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP Replaces: 70259R2, 70260R2, 70261R2, 70262R1, 130476R93 USA made NOTE: See website for full applications. $89.95 Crankshaft Gear fits: M, MV, Supers, MTA, I, O, W, T6 series, 400, 450 gas, LP Replaces: 45627D USA made NOTE: 29 teeth. 3-piece Camshaft Bearing / Bushing Set Fits: M, MV, Supers, I6, O6, W6, T6, 400, 450 gas, LP, Replaces: 53422DA, 53423DB, 53424DA USA made IHS2745 Crankshaft Gear fits: A, B, C, Supers (F12, F14 Must restamp timing mark), 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, 3444, 3514, T5, T340, 500 Crawlers, Replaces: 24401D, 46870DA NOTE: 33 teeth. Crankshaft Gear fits: H, HV, I, O, W4 series, Supers 300, 350 gas, LP Replaces: 43706D USA made NOTE: 24 teeth. IHS2046 $38.75 Crankshaft fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 353743R93, 527821R92 (Bearings sold separately), Casting: 251264R1, 357247R1 NOTE: Does not include pilot bushing. If bushing is needed order IHS730. $52.50 3-piece Camshaft Bearing / Bushing Set Fits: H, I4, O4, W4, Supers, 300, 350 gas, LP, Replaces: 53419DB, 53420DA, 53421DA USA made IHS2741 Description / Application Crankshaft Pulley fits: Cub & Cub Lo-Boy Replaces: 251269R3 (4-5/8" O.D.) NOTE: For seal use IHS1307. DOES NOT FIT 154, 184 or 185. $134.95 $14.95 Pushrod Side Cover Gasket fits: M & $14.95 Pushrod Side Cover Gasket fits the Camshaft Gear fits the following gas w/ C-113, C-123, C-135, C-146, C-153: A, B, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, 3514, T340, T5, 500 Crawlers Replaces: 6779DB, 375712R1 NOTE: 66 teeth. Price $99.95 following gas, LP: (H, HV, Supers), O4, OS4, W4, Super W4, 300, 350 Replaces: 45018DB (18-1/16" length, 4" width) USA made Supers, I, O, T, W6 series, 400, 450 gas, LP Replaces: 49029DA, DB USA made Description / Application $133.00 Stud Grommets fits the following diesels w/ D-236, D-282, D-301: 460, 560, 606, 656, 660, (706 w/ D-282) Replaces: 278308R3 USA made IHS2391 IHS2685 IHS695 NOTE: Bearings not included. Order # Camshaft (LH Thread) fits: M, MTA & Supers, I, O, T, W6 series gas Replaces: 45955D, 48196DBX $24.50 Valve Cover Gasket only fits: I9, T9, W9, Super W9, WR9, WR9S, 600, 650, UC335, UC350 Power Units gas, LP Replaces: 52793DA USA made Description / Application $258.80 Valve Cover Gasket fits: 350 diesel Replaces: 367469R1 USA made $18.95 Valve Cover Gasket only fits the Description / Application Fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504 (All w/ C113, C123, C135, C146, C153 gas, LP engines), Replaces: 47385D, 47386D, 357548R1, 360213R91 (10.762" length, 0.250" tube dia.) Price Crankshaft, parts IHS2050 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $109.95 Crankshaft Gear fits: 340 diesel, 504 diesel, (454, 464, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP), (460, 560, 606, 656, 660 gas, LP, diesel), 706 gas, LP, D282 diesel Replaces: 367272R1 USA made NOTE: 27 teeth. Crankshaft, parts continue on next page 227 Engine parts full applications. IHS182 Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, T4, T5, T340, 500 Crawlers, Replaces: 43378DE Pushrods - USA made NOTE: Sold individually. See website for Description / Application IHS869 MFS2621 Camshaft, parts IH/Farmall IH/Farmall IHS2227 Engine parts Valve cover, push rod side cover gaskets Crankshaft, parts cont... Order # IHS2387 IHS2416 IHS1316S1 (Front) IHS1316S2 (Rear) ABC131 IHS2636 IHS2445 228 $5.75 $7.95 $15.50 Order # Price Rear Crankshaft Seal fits: Cub, Cub LoBoy, 154, 184, 185 all using late retainer Replaces: 251378R92, 360662R91, 364692R91, 364861R91 USA made NOTE: For all models using later retainer: must be used with late # 251363R2 rear seal retainer, will NOT fit tight in early #251363R1 retainer. For engines with the early R1 retainer, you must either change to the late R2 retainer or use loctite 660 or something similar to retain seal into the R1 retainer. (Early R1 retainer has bore size of 3.881", late R2 retainer has a bore size of 3.876", seal has an OD of 3.881"). IHS2641 $34.95 Crankshaft Rear Oil Seal Retainer Gasket Fits: Cub, Cub LoBoy, 154, 184, 185 Replaces: 251364R1 USA made Front Crankshaft Seal fits: Cub, A, B, C, Supers, 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, 340, 404, 424, 444, 504 gas, LP, Replaces: 389407R92 (1.875" I.D., 2.627" O.D., 0.312" wide) 13-piece Rear Crankshaft Seal Kit w/ Felt Seals fits: A, B, C, Supers, 100 thru 240, 330, (340 gas, up to engine SN: 100500); Rear 2-piece felt only also fits F12, F14 USA made NOTE: See website for replacement numbers. $9.95 $12.75 $9.30 $24.50 $14.50 Crankshaft Felt Seal Fits: F20, Regular IHS1316S1 Replaces: 12734D IHS3116S2 Replaces: 12748D USA made NOTE: Close out. ABC1579 ABC1565 IHS2411 $13.90 $13.25 $17.95 IHS2062 (Front) $24.95 IHS2060 (Rear) $44.95 Description / Application 8-piece Rear Crankshaft Seal Kit Fits: I, O, T - W6 series, M - 450 gas, LP Replaces: 379618R1 USA made Front Crankshaft Seal fits the following gas, LP, diesel: 460, 560, 606, 656, 660, (706 except German diesel), 3616; Fits the following gas, LP: 454, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856; Hydros: 70, 86; 2400, 2500, 3400, 3500A, 4500B; Fits the following diesel: 340, 504, (3514 w/ D-188), Replaces: 129370H1, 357672R91, 606750C91, 391976R91, 317549R91, 117568H1, 119020H1 (2.375" I.D., 3.355" O.D., 0.475" wide) 8-piece Rear Crankshaft Seal Kit Fits: H, Super H, I, O W4 series, 300, 350 gas, LP, Replaces: 45014D, 379617R91 USA made Front Crankshaft Seal fits: M, Supers, I, O, T, W6, 9 series, 400, 450, 600, 650 gas, LP Replaces: 53872D, 357972R91 (2.625" I.D., 3.380" O.D., 0.475" wide) USA made IHS3084 IHS3086 $8.75 $14.95 Price Rear Crankshaft Seal w/ Gasket & Rear Main Cap Plugs fits: 460, 560, 606, 656, 660, (706 except German diesel) gas, LP & diesel; 454, 464, 544, 574, 666, 674, 756, 806, 826, 856 gas, LP; 340 diesel, 504 diesel Replaces: 393180R91, 403066R91, 538983R1 (4.568" O.D., 4.000" I.D., 0.375" wide) NOTE: See website for all applications. Crankshaft Seal fits the following diesels: 666, 686, 766, (886 w/ D360), 966 - 1566, 986 - 1586, 3388 - 7488 (All using D312, D360, D414, D436, D466 engines) IHS2062 Replaces: 690437C91 (3.000" I.D., 4.000" O.D., .500" wide) Front Crankshaft Seal fits: B250, B275, B276, B414, F12, F14, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) (All w/ BC144 gas, BD144 diesel, BD154 diesel, Early C113 gas), Replaces: 20290D, 3108650R91 (1.875" I.D., 2.875" O.D., 0.313" wide) USA made Rear Crankshaft Seal fits the following w/ engine SN: 26077 & up: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) (All w/ BC144 gas, BD144 diesel, BD154 diesel) Replaces: 3072092R1 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application $8.65 Crankcase Front Cover Gasket Fits: Farmall Cub up to SN: 139516 Replaces: 351675R1, 351675R2 USA made IHS2350 Order # Price IHS3260 $29.50 NEW! 7-pc. Crankcase Front Cover Gasket Set w/ Seal Saver Fits: Same as IHS1389 USA made Crankcase Front Cover Gasket Fits: Farmall Cub SN: 139517 & up, Cub LoBoy, 154, 184, 185, UC60 Power Units Replaces: 355945R1 USA made IHS1389 Description / Application $8.65 $17.75 Front Crankshaft Seal fits the following diesels: 806, 856, 1026, 1206, 1256, 1456 Replaces: 333750R91 (2.375" I.D., 3.355" O.D., 0.475" wide) IHS2060 Replaces: 691631C91 (5.125" I.D., 6.135" O.D., .500" wide) Front Crankshaft Seal fits: (H, HV SN: 5416 & up), Supers, I4, O4, OS4, W4; Fits the following gas, LP: 300, 350 Replaces: 53888D, 358787R91, 360692R91 (2.000" I.D., 2.879" O.D., 0.312" wide) Order # IHS2343 Crankshaft, parts cont... Crankcase Front Cover Gasket (Timing Gear Cover Gasket) fits the following gas, LP, Farmalls w/ C-113, C-123, C-135, C-146, C-153: A, AV, B, BN, C & Supers, 100, 130, 140, 200, 230, 240, 330, 404, 424, 444, 504, 2404, 2424, 2444, 3514; Crawlers: T340, T5, 500; Power Units: U2, U2A Replaces: 46179DC, DD USA made Engine assy. & break-in lube Contains a special additive to cover the wear surfaces that help prevent scoring & galling during initial engine start up. Also contains corrosion inhibitors to help prevent rust & pitting of surfaces & zinc for older engine valve train protection. Use on bearings, camshafts, lifters, oil pumps, etc. (4 oz. bottle) USA made Description Order # Price NEW! Melling Engine Assembly......................ABC3346...........$6.50 & Break-In Lube NOTE: Not for use on cylinder wall or piston rings. Crankshaft bearings NOTE: Measure bearings before ordering, no returns if package has been opened. Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications. Order # Price Description Applications Replacement number(s) The following fit Cub (1947-64), Cub LoBoy (1964-68) up to engine SN: 261717 using 251246R1 connecting rod IHS1942 $12.25 Standard Rod Bearing (.761" bearing width. 1.499" standard rod journal) USA made 251248R21, 367873R91 IHS1945 $46.95 Standard Rod Bearing Set (.761" bearing width. 1.499" standard rod journal) USA made NOTE: Will not fit engines above this serial number or engines that have been converted to the later connecting rods unless using early connecting rods. 251248R21, 367873R91 IHS2538 $11.95 Connecting Rod Bearing (For 0.010" (1.489") undersize rod journal) (0.761" wide bearing) 376603R91, 376604R11 IHS2540 $11.95 Connecting Rod Bearing (For 0.020" (1.479") undersize rod journal) (0.761" wide bearing) 376606R11 The following fit Late Cub w/ engine SN: 261718 & up (1968 & up), 154, 184, 185 (All using 527457R11 connecting rod) IHS3217 $15.50 NEW! Standard Rod Bearing (Standard 1.499" rod journal, 0.661" wide bearing) 527458R11 IHS2542 $15.50 Connecting Rod Bearing (For 0.010" (1.489") undersize rod journal) (0.661" wide bearing) USA made 527461R11, 527786R91 IHS3220 $15.90 NEW! Connecting Rod Bearing (For 0.020" (1.479") undersize rod journal) (0.661" wide bearing) 527462R11 The following fit Cub, Cub LoBoy, 154, 184, 185 IHS1941 $54.95 Standard Main Bearing Set (1.624" standard main journal) USA made 357216R91, 357219R91, 367875R91 IHS2828 $54.95 Main Bearing Set (For 0.010" (1.614") undersize main journal size) USA made 376608R91, 376611R91, 376622R91, 376625R91 IHS2830 $82.50 Main Bearing Set (For 0.020" (1.604") undersize main journal) 376615R91, 376618R91, 376629R91, 376632R91 Crankshaft bearings continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 229 Engine parts Engine parts IHS1307 $14.95 Description / Application Crankshaft, parts cont... IH/Farmall IH/Farmall IHS2396 Price Crankshaft, parts cont... Crankshaft bearings cont... Crankshaft bearings cont... NOTE: Measure bearings before ordering, no returns if package has been opened. Order # Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications. Order # Price Description Applications Replacement number(s) The following fit Cub, Cub LoBoy, 154, 184, 185 cont... IHS2832 $82.50 Main Bearing Set (For 0.030" (1.594") undersize main journal) 357468R91, 356628R92, 357264R91, 357267R91 The following fit A, B, C, F12, F14, Super A, Super C, 100, 130, 140, 200, 230, 240 (All w/ C-113, C-123 engines) IHS2532 $14.75 Standard Connecting Rod Bearing (For standard (1.750") rod journal) USA made 356304R11 IHS2534 $14.75 Connecting Rod Bearing (For 0.010" (1.740") undersize rod journal) USA made 376636R11 IHS2536 $14.75 Connecting Rod Bearing (For 0.020" (1.730") undersize rod journal) USA made 376638R11 IHS2834 $62.50 Main Bearing Set (For 2.125" standard main journal) USA made 360216R11, 360221R11 IHS2836 $62.50 Main Bearing Set (For 0.010" (2.115") undersize main journal) USA made 376639R91, 376640R11, 376641R11 IHS2838 $62.50 Main Bearing Set (For 0.020" (2.105") undersize main journal) USA made IHS2840 $62.50 Main Bearing Set (For 0.020" (2.105") undersize main journal) USA made 360217R11, 360222R11 The following fit (H, HV up to SN: 391357), (I4, O4, OS4, W4 up to SN: 33339); Fits crankshafts w/ casting #43734DB, 43734DC Replacement number(s) $19.95 Standard Connecting Rod Bearing (All using 2.248" rod journal) USA made 43788DBX, 43788DX IHS2451 $19.95 Connecting Rod Bearing (For 0.010" (2.238") undersize rod journal) USA made 377962R11, 43786DBX IHS2453 $19.95 Connecting Rod Bearing (For 0.020" 2.228" undersize rod journal) USA made 377964R11, 43787DBX IHS2848 $78.50 Main Bearing Set (For 2.498" standard main journal) (All using standard 2.498" main journal & C152 C.I.) USA made 43707DAX, 43708DAX IHS2850 $78.50 Main Bearing Set (For 0.010" (2.488") undersize main journal) (All using standard 2.498" main journal & C152 C.I.) USA made 377966R91 IHS2852 $78.50 Main Bearing Set (0.020" (2.478") undersize main journal) (All using standard 2.498" main journal & C152 C.I.) USA made 377969R91 The following fit Late H SN: 391358 & up, (I, O, W4 SN: 33340 & up), Supers, 300, 350 gas, LP; Fits crankshafts w/ casting #43734DH, DG IHS2457 $15.50 Standard Connecting Rod Bearing (For 2.297" standard rod journal) USA made 353745R95 IHS2459 $15.50 Connecting Rod Bearing (For 0.010" (2.287") undersize rod journal) USA made 357988R11, 376696R11 IHS2461 $15.50 Connecting Rod Bearing (For 0.020" (2.277") undersize rod journal) USA made 357989R11, 376698R11 IHS2854 $78.50 Main Bearing Set (For 2.558" standard main journal) USA made 367881R91, 357994R11, 357998R11 IHS2856 $78.50 Main Bearing Set (For 0.010" (2.548") undersize main journal) USA made 376699R91 The following fit M, I, O, W6 gas series (up to mid 1951); Also fits crankshaft casting #45571DB, 45571DC NOTE: See website for serial number breaks. IHS2463 $19.95 Standard Connecting Rod Bearing (For 2.498" standard rod journal) USA made 45745DBX IHS2465 $19.95 Connecting Rod Bearing (For .010" 2.488" undersize rod journal) USA made 45743DBX IHS2467 $19.95 Connecting Rod Bearing (For .020" (2.478") undersize rod journal) USA made 45744DBX IHS2469 $17.95 Standard Connecting Rod Bearing (For 2.548" standard rod journal) USA made 356957R11 IHS2471 $17.95 Connecting Rod Bearing (For .010" (2.538") undersize rod journal) USA made 356955R11, 376716R11 IHS2473 $17.95 Connecting Rod Bearing (For .020" (2.528") undersize rod journal) USA made 376718R11 IHS2462 $3.95 Connecting Rod Bolt Lock Tab (0.490" bolt hole diameter) USA made NOTE: 8 used per engine; Sold individually. 47496DB IHS2472 $3.95 Connecting Rod Bolt Lock Tab (0.549" bolt hole diameter) USA made NOTE: 8 used per engine; Sold individually. See website for full applications. 47507DA, 253216R1, 253220R1 The following fit M SN: 278050 & up; I6, O6 both SN: 35600 & up; T6 SN: 7611 & up; W6 SN: 35644 & up; Super M, Super MTA, Super W6, 400, 450 gas, LP (mid 1951 & up); Also fits crankshaft casting # 45571DD, 45571DE IHS2866 $79.95 Main Bearing Set (For 2.808" standard main journal) USA made 356985R11, 356986R11 IHS2868 $79.95 Main Bearing Set (0.020" (2.538") undersize main journal) USA made 376720R11, 376721R11 IHS2870 $79.95 Main Bearing Set (For 0.020" (2.788") undersize main journal) USA made 376723R11, 376724R11 The following fit 330, 340, T340, T5, TC5, Early 500 Crawler (All up to SN: 100500 w/ C135 gas) IHS2747 $23.95 Connecting Rod Bearing (For 1.810" standard rod journal) USA made 36777R11 IHS2749 $23.95 Connecting Rod Bearing (For 0.010" (1.800") undersize rod journal) USA made 376646R11 The following fit 340 diesel, 504 diesel, (464, 544, 574, 666, 674, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP), (460, 560, 606, 656, 660 gas, LP, diesel), 706 gas, LP, D282 diesel IHS2544 $9.95 Standard Connecting Rod Bearing (For standard (2.374") rod journal) USA made 367408R11 IHS2546 $10.65 Connecting Rod Bearing (For 0.010" (2.364") undersize rod journal) USA made 376666R11 IHS2548 $10.65 Connecting Rod Bearing (For 0.020" (2.354") undersize rod journal) USA made 376668R11 The following fit 460, 560, 606, 656, 660, 706 gas, LP, D282 diesel; 666, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP (All w/ 3-3/4" thrust bearing dia.) IHS2842 $74.70 Main Bearing Set (For standard 2.749" main journal) USA made 367276R91, 367279R91, 367282R91, 367285R91 IHS2844 $74.70 Main Bearing Set (For 0.010" (2.739") undersize main journal size) USA made 376670R91, 376673R91, 376676R91, 376679R91 IHS2846 $82.35 Main Bearing Set (For 0.020" (2.729") undersize main journal) 376683R91, 376686R91, 376689R91, 376692R91 Oil pump drive gear Fits the following w/gas BC-144: 2300A, B250, B275, B414, 354, 434, 444, 2444, 3414, 3444, 7000 Forklift, Replaces: 3043830R1 (1.726" o/a length) Description $99.95 Main Bearing Set (For 2.748" standard main journal) USA made 367892R91, 45628DAX, 45630DAX IHS2862 $99.95 Main Bearing Set (For 0.010" (2.738") undersize main journal) USA made 377979R11, 377980R11 IHS2864 $99.95 Main Bearing Set (0.020" (2.728") undersize main journal) USA made 377982R11, 377983R11 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price IHS406 $38.75 JDS500 $32.50 Price Oil Pump Drive Gear..........................................IHS1291.......... $128.50 NOTE: 10 teeth. May have to redrill hole in shaft for drive pin. Oil pump Fits: 340 diesel, 504 diesel, (460, 560, 606, 656, 660 gas, LP, diesel), (706 gas, LP, D282 diesel), (666, 686, 756, 766, 806, 826, 856, Hydro 70, Hydro 86 gas, LP only) Replaces: 230421R91, 379138R91 USA made The following fit M up to SN: 278049; W6, O6 both up to SN: 35643; I6 up to SN: 35599; T6 up to SN: 7610 (All gas series w/ early C248 C.I. gas engine); Also fits crankshaft casting # 45571DB, 45571DC IHS2860 Order # Oil caps Description Order # Price NEW! Oil Pump....................................................IHS3349.......... $128.50 NOTE: Includes stationary sump screen that can replace the floating sump. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Oil Fill / Breather Cap w/ Clip & Copper Filter Element fits: A, B, C & Supers, 200, 230, B275; B414, 354, 2300 & 3414 gas, diesel, Replaces: 49049DX, 364901R91, 364899R91 (3-1/4" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. Oil Fill / Breather Cap w/ Clip & Copper Filter Element fits: Same as IHS406 (1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. Oil caps continue on next page 231 Engine parts IHS2449 230 Description / Application IH/Farmall IH/Farmall The following fit A, B, C & Supers, 100, 130, 140, 200, 230, 240, (F12, F14 w/ 30925D crankshaft, but must relocate the tabs in the block & main caps) Engine parts Price The following fit Late M, MTA, Supers, I, O, W6, 400, 450 gas, LP NOTE: See website for serial number breaks. Oil caps cont... Order # ABC042 Price $12.95 IHS736 $9.99 ABC292 $1.15 Oil pan drain plug, gaskets, parts cont... Description / Application Order # Oil Fill / Breather Cap w/ Clip & Filter Element fits the following gas, diesel: A, B, C & Supers, 200, 230, B275, B414, 354, 2300, 3414 (1-1/2" tall) NOTE: Economy style. Oil Fill Cap fits: F12 SN: 56316 & up w/ IH motor, F14, H, M & Supers, I, O, T, W4, 6, 9 series gas, diesel, Farmall 300, 350 Row-Crops, 400, 450 (No Internationals & Utilities), Replaces: 4819D Gasket only fits: F12, F14, H, M & Supers, I, O, T, W4, 6, 9 series gas, diesel, Farmall 300, 350 Row-Crops, 400, 450 (No Internationals & Utilities) IHS809 Price $12.95 IHS3080 $6.50 IHS813 $19.95 IHS803 $15.75 Price ABC539 $7.95 ABC540 Description / Application Oil Pan Drain Plug fits the following gas, LP, diesel: (Late Super A, Super C), 100 thru 660, B250, B275, B414, 3414, 3444, 706 thru 4386 except German diesel, 3488 thru 3688; Following w/ gas: 454, 464, 544, 574, 674, 826, 2400, 2500, Replaces: 359885R1, 688067C1 (7/8"-18 UNF) USA made $2.99 IHS1999 Washer / Gasket (For ABC539) Replaces: 3405HA USA made NOTE: Copper. IHS925 IHS503 IHS818 IHS1953 232 $10.55 $14.75 $9.95 $8.95 IHS1673 Oil Filter Drain Cap fits: Cub, Cub LoBoy; Serviceable for Cub LoBoy 154, 184, 185 (3/8" pipe thread) USA made NOTE: Has stamped "IH". Cast iron w/ zinc plating. $20.95 Price ABC095 $10.50 ABC096 $17.40 Oil Pan Gasket fits the following gas, LP w/ C-248, C-264, C-281: M, I, O, T, W6 series, Supers, 400, 450, Replaces: 46109DA Oil Pan Gasket fits the following gas, LP, diesel w/ C-221, C-263, C-282, C-291, C-301, D-236, D-282, D-301: 460, 560, 606, 656, 660; Fits the following gas: 666, 686, (706 gas or D-282 diesel); Fits the following gas, LP: 756, 766, 806, 826, 856; Hydros: 70, 86, Replaces: 160476H1, 318058R91, 369984R1 USA made ABC097 $9.80 Oil Pan Gasket fits: 966 - 4366, 986 - 4386, 3388 - 7488; Combines & Industrials using D414, DT414, D436, DT436, DT466 engines Replaces: 671827C1 - C4 USA made Oil filter elements w/ gasket - USA made Order # Price IHS3295 $174.50 Application Cartridge type ABC093 Oil Pan Gasket fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 251369R1 ABC094 Order # Price ABC108 $43.50 Fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, Replaces: 55755DB (10.491" I.D., 11.438" O.D.) NOTE: 90 teeth. ABC107 $56.95 Fits the following gas: H & Supers, I, O, W4 series, 300, 330, 340, 350 Replaces: 45638DB (11.990" I.D., 13.200" O.D.) NOTE: 104 teeth. IHS2865 $78.50 Fits: M, MD, MTA, Supers, I, O, W6 series & Supers, 400, 450 gas, LP, diesel, 560 diesel, 660 diesel, Replaces: 266142R1 (14.485" I.D., 15.720" O.D., 0.800" wide) NOTE: 125 teeth. Cartridge type cont... Oil Pan Gasket fits: B250, B275, B276, B414, 238, 274, 354, 364, 374, 384, 424, 434, 444, 2300A, 3414, 3444, (TD5, 500 Crawler) all w/ BC144 gas, BD144 diesel or BD154 diesel engines, Replaces: 703840R2 Oil Pan Gasket fits the following gas w/ C-152, C-164, C-169, C-175: H & Supers, I, O, W4 series, 300, 350, Replaces: 45267DA Application Fits the following gas w/ C-113, C-123, C-135, C-146, C-152, C-153, C-164, C-169, C-175: A, AV & Supers, (B, BN SN: 97398 & up), C, Super C, (H, HV SN: 121022 & up), Super H, Super, HV, (O4, I4, T4, T5 & W4 SN: 4958 & up), Super W4, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 404, 424, 444, 504, 2404, 2424, 2444, 2504, 3444 Replaces: 63855D, 355009R91, 360430R91, 376374R91 (4" tall, 3-1/4" wide) Fits the following gas w/ C-248, C-335, C-350: 15-30, 22-36, (M, MV up to SN: 59393), (T6, I6, W6 up to SN: 4252), W9, 600, 650; Following w/ diesel D-248, D-264, D-281, D-335, D-350: MD, Super MD, ODS6, WD6, Super WD6, WD9, 400, 450, 600, 650, Replaces: 63884D, 63885D, 257867R92, 360432R91, 376376R91 (6-15/16" tall, 3-15/16" wide) Fits the following gas w/ C-221, C-263, C-291, C-301: 460, 560, 606, 656, 660, 706, 756, 806, 826, 856, 2606, 2656, 2706, 2756, 2806, 2826, 2856; Fits the following diesel w/ D-166, D-188, D-236, D-282, DT-361, DT-407: 340, 460, 504, 560, 656, 660, 706, 806, 856, 1026, 1206,1256, 1456, 2504, 2606, 2656, 2706, 2806, 2856, 21026, 21206, 21256, 21456; Combines: 815, 915 Replaces: 279994R91, 323827R91 (5-1/2" tall, 3-7/8" wide) Spin On type Oil Level Indicator (Petcock) fits the following w/ petcocks mounted oil pan: F12, F14, F20, F30, I12, I14, O12, O14, W12, W14, W30, Regular, 10-20, 15-30, 22-36, A, B, C & Supers, H, M & Early Supers, I, O, W4, 6 series, Replaces: 1998TA (3/8" pipe thread) NOTE: 2 used per tractor; Sold individually. Engine Block Inspection Cover Gasket Fits: F20 - W30, 10-20 - 22-36 Replaces: 7102-1/8T, 7102T (6-1/2" O.D., 5-1/4" I.D., 0.575" wide, 0.064" thick) USA made NOTE: 2 used per engine; Sold individually. $9.95 Order # $9.95 Fits the following gas w/ C-60: Cub, Cub LoBoy 154, 184, 185, Replaces: 376373R91 (3-15/16" tall, 2-1/2" wide) NEW! Spin-On Engine Oil Filter Adapter Kit fits: 806, 856, 1026, 1206, 1256, 1456 diesels (plus Combines & Industrial using D361 thru DT407 engines) USA made NOTE: Includes (2) aluminum adapter bases, (2) mounting studs, (2) internal o-rings, (2) square cut external o-rings, (2) Case-IH spin-on filters, (1) instruction sheet. No drilling is required. Economy muffler clamps USA made Order # Price ABC568 $2.95 (1-1/2" clamp) ABC570 $2.95 (1-5/8" clamp) ABC572 $2.95 (1-3/4" clamp) ABC574 $3.25 (1-7/8" clamp) ABC576 $3.25 (2" clamp) NOTE: Use w/ IHS309, IHS497, IHS2239 mufflers. ABC578 $3.25 (2-1/4" clamp) ABC580 $3.25 (2-1/2" clamp) NOTE: Use w/ IHS311, IHS313 mufflers. ABC583 $4.95 (2-3/4" clamp) ABC585 $4.95 (3" clamp) NOTE: Use w/ IHS041, IHS317, IHS1772 mufflers. Fits the following gas w/ C-113, C-152, C-248, C-264, C-281: F12, F14, F20, F30, T20, 10-20, Regular, W30, A, AV, (B, BN up to SN: 97397), (H, HV up to SN: 121021), (M, MV SN: 59394 & up) Super M, Super MTA, O4, I4 & W4 up to SN: 4957; T6, I6, W6 SN: 4253 & up; 400, W400, 450, W450 Replaces: 63858D, 355010R91, 360431R91, 376375R91 (6-1/8" tall, 3-1/2" wide) (3-1/2" clamp) ABC1771 $7.95 (4" clamp) NOTE: Use w/ IHS1769 muffler. Muffler clamps Order # Price STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Flywheel ring gears IHS1227 Order # Price IHS1929 $64.30 Dimensions ABC2234 $4.95 ABC1867 $6.95 $14.25 Description / Application Description / Application Fits: Cub, 184, 55T Balers Replaces: 251270R2 (8.696" I.D., 10.678" O.D.) NOTE: 84 teeth. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $16.50 Description / Application Muffler Clamp fits: Cub, Cub LoBoy, Replaces: 351437R1 (1 bolt, 1-3/8" I.D.) NOTE: Original style. Chrome plated. Exhaust Manifold Clamp w/ Hardware (For Underslung Exhaust) Fits: Cub, Cub LoBoy Replaces: 362361R1 Muffler clamps continue on next page 233 Engine parts Engine parts Order # cont... Flywheel ring gears cont... IH/Farmall IH/Farmall Oil pan drain plug, gaskets, parts Description / Application Oil Pan Gasket fits the following gas w/ C-113, C-123, C-135, C-146, C-153: A, B, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504, 2404, 2424, 2444, 2504, Replaces: 43458DB Oil filter elements w/ gasket - USA made Underslung muffler u-bolt Muffler clamps cont... Order # Price ABC341 $9.95 Fits: Cub, Cub LoBoy w/ horizontal exhaust, Replaces: 362363R1 USA made Description / Application Description 1-1/2" Chrome Clamp fits: IH/Farmall models NOTE: Original style. ABC360 ABC327 $9.95 1-3/4" Clamp fits: I300, I330, F340, I340, I350, I504 gas, LP (All w/ underslung exhaust), Replaces: 362304R1 (muffler to tailpipe) (Fits pipe O.D. of 1.725" - 1.825" range) $9.95 Price IHS1212 $33.95 IHS1706 $33.95 IHS1936 $98.50 IHS1706: High temperature paint. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2563 or RCS002; If clamp is needed order ABC1867, ABC568 or ABC341. IHS1936 IHS1212 IHS1706 $10.30 ABC2521 $16.95 2-1/2" Stainless Steel Muffler Clamp Fits: H thru 560, Replaces: 31790DA, 350602R1 ABC2627 $8.50 234 IHS1217 $39.95 IHS1709 $39.95 IHS1217 2-1/2" Painted Steel Muffler Clamp Fits: H thru 560, Replaces: 31790DA, 350602R1 Muffler Clamp Kit Serviceable for gas, LP w/ underslung exhaust: F240, I300, I350, 330, 340, 404, 424, 444, 504, 2444, 2504, T4 Crawler, Replaces: 362300R1 NOTE: Includes: (2) cast iron clamps, nuts, bolts & lock washers. IHS497 IHS1940 IHS2535 $46.95 IHS2569 $108.50 IHS1936: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2291. IHS1212, IHS1706, IHS1936 (Vertical body) dimensions: Inlet I.D.: 1.340", Inlet O.D.: 1.450", Outlet O.D.: 1.385"; Exhaust pipe: 1.375" O.D. x 9.5" length, Body: 21-3/4" o/a length, 3" dia. x 10.875" length, Intake pipe: 1.313" I.D. x 1-7/8" length 2-1/2" Chrome Muffler Clamp fits: H thru 560, Replaces: 350602R1 (Fits pipe O.D. of 2.350" - 2.550" range) NOTE: Original style. IHS1709 Fits: Farmall Cub, IH LoBoy both w/ underslung exhaust (horizontal muffler) Replaces: 363116R91 IHS1217: High temperature paint. IH logo & part number is stamped into the TOP HAT OF THE MUFFLER. IHS1709: High temperature paint. IH logo & part number is stamped into the SIDE OF THE MUFFLER. IHS1217, IHS1709 (Horizontal body) dimensions: Inlet I.D.: 1.340", Inlet O.D.: 1.465", Outlet O.D.: 1.385"; Exhaust pipe: 1.375" O.D. x 9.5" length, Body: 21-3/4" o/a length, 3" dia. x 10.875" length, Intake pipe: 1.313" I.D. x 1-7/8" length (If clamp is needed order ABC1867, ABC568 or ABC341; If u-bolt is needed order IHS1231) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS1944 IHS2535 IHS2569 IHS497, IHS1940 (Vertical round body) dimensions: Inlet length: 2.250", Inlet I.D.: 1.975", Inlet O.D.: 2.080" for IHS497, 2.000" for IHS1940, Shell length: 16.500", Shell diameter: 4.250", Outlet length: 10", Outlet O.D.: 1.385", Overall length: 28.750" Fits: 140, 240, 330, 340, 404, 2404, 3414 (gas), (T340, T5, 500 Crawlers), (91 Combine & 201 Windrower) (All w/ vertical exhaust); Will also fit A thru 230 if larger diameter outlet pipe is desired Replaces: 360720R91 IHS2535: High temperature paint. IH logo & part number is stamped into the SIDE OF THE MUFFLER. Restoration quality. If raincap is needed order IHS2565; If clamp is needed order ABC2565. $69.95 IHS1933 $130.95 IHS1930 IHS1933 Description / Application Fits: H, I4, W4 & Supers, F300, F350 $118.50 (1-3/4" dia. outlet) IHS1944 Replaces: 51070D, 350600R95, 355869R1 IHS500: High temperature paint; IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2565; If clamp is needed order ABC2627. IHS1944: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2294; If clamp is needed order ABC2521. IHS500 IHS1944 IHS1923 $69.95 IHS1926 $136.95 IHS500, IHS1944 (Vertical round body) dimensions: Inlet length: 2", Inlet I.D.: 2.400", Inlet O.D.: 2.525" for IHS500, 2.485" for IHS1944, Shell length: 12", Shell diameter: 5.500", Outlet length 13", Outlet O.D.: 1.750" for IHS500, 1.785" for IHS1944, Overall length: 27" Fits: M, Supers, I, T, W6, Supers, 400, 450 gas, LP, diesel, Replaces: 357288R92 IHS1923: High temperature paint; IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS3101; If clamp is needed order ABC2627. IHS1926: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2701; If clamp is needed order ABC2521. IHS2569: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2294; If clamp is needed order ABC2519. IHS2535, IHS2569 (Vertical round body) dimensions: Inlet length: 2-1/4", Inlet I.D.: 1-61/64", Shell length: 16-1/2", Shell diameter: 4-1/4", Outlet length 10", Outlet O.D.: 1-25/32", Overall length: 28-3/4" IHS1930 Price $51.85 IHS1923 IHS1926 IHS1923, IHS1926 (Vertical round body) dimensions: Inlet length: 1.610", Inlet I.D.: 2.400" for IHS1923, 2.395" for IHS1926, Inlet O.D.: 2.535" for IHS1923, 2.500" for IHS1926, Shell length: 15.500", Shell diameter: 6", Outlet length: 13", Outlet O.D.: 2.355" for IHS1923, 2.395" for IHS1926, Overall length: 30" Fits the following gas, LP, diesel (unless noted): 340 diesel, 460, 504 diesel, 544, 560, 606, 656 gear drive, 660, TD340, (500 Crawler SN: H2371 & up), 3514, 3616, Replaces: 370644R91 IHS1930: High temperature paint; IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2567; If clamp is needed order ABC2627. IHS1933: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2296; If clamp is needed order ABC2521. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com IHS1930, IHS1933 (Vertical round body) dimensions: Inlet length: 2.063", Inlet I.D.: 2.400", Inlet O.D.: 2.540", Shell length: 11", Shell diameter: 6", Outlet length: 16.844", Outlet O.D.: 2.505" for IHS1930, 2.525" for IHS1933, Overall length: 31" 235 Engine parts 2" Painted Steel Clamp Fits: A thru 404 Replaces: 48889DA Order # IHS500 IHS1940: Polished stainless steel. Can discolor from extreme heat. IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2291; if clamp is needed order ABC2519. Description / Application Fits: Farmall Cub w/ vertical exhaust Replaces: 351436R92 IHS1212: High temperature paint. IH logo & part number is stamped into the TOP HAT OF THE MUFFLER. If raincap is needed order IHS2563 or RCS002; If clamp is needed order ABC1867, ABC568 or ABC341. Restoration quality mufflers cont... IH/Farmall IH/Farmall Order # ABC2625 $8.60 $12.50 IHS1940 Description / Application Fits: A, B, C & Supers, 100, 130, 200, 230 $108.50 Replaces: 360720R91 IHS497: High temperature paint; IH logo & part number is stamped into the SIDE OF THE MUFFLER. If raincap is needed order IHS2563; if clamp is needed order ABC2625. NOTE: Original look, original sound. 2" Stainless Steel Muffler Clamp Fits: A thru 404 FDS116 Price Price $46.95 Restoration quality mufflers ABC2519 $14.95 ABC351 Order # IHS497 Underslung Muffler U-Bolt.....................................IHS1231........$12.50 NOTE: Installs around the mufflers for support. Chrome Muffler Clamp fits: A thru 404 Replaces: 48889DA (Fits pipe O.D. of 1.850" - 2.000" range) NOTE: Original style. Engine parts Order # Restoration quality mufflers cont... Economy mufflers - USA made Order # Price IHS2660 $69.95 Economy mufflers - USA made cont... Application Fits: 154, 184, 185 Replaces: 404914R1 NOTE: Silver paint. Imported. Order # Price IHS041 $48.65 $37.05 IHS315 Fits: F30, I30, W30 gas, TD18 diesel Replaces: 264126R92 $45.95 IHS317 (Vertical round body) dimensions: Inlet length: 4-3/4", Inlet I.D.: 2-3/4", Shell length: 15", Shell diameter: 4-1/4", Outlet length: 6-1/2", Outlet O.D.: 2-3/4", Overall length: 26" (If clamp is needed order ABC585) $34.30 IHS309 (Vertical round body) dimensions: Inlet length: 2-3/4", Inlet I.D.: 1-15/16", Shell length: 17", Shell diameter: 4-1/4", Outlet length: 9-1/4", Outlet O.D.: 2", Overall length: 29" (If raincap is needed order RCS005, if clamp is needed order ABC327) IHS311 $33.55 Fits: H & Supers, I & W4 series, F300 - 350 gas, Replaces: 350600R95 IHS1772 $118.20 IHS311 (Vertical round body) dimensions: Inlet length: 2-1/2", Inlet I.D.: 2-3/8", Shell length: 14-1/2", Shell diameter: 5-1/2", Outlet length: 11-3/4", Outlet O.D.: 2-1/2", Overall length: 29" (If raincap is needed order IHS2567 or RCS007, if clamp is needed order ABC351) IHS313 $33.15 Fits: H, M & Supers gas, diesel, I, T, W4 & 6 series, 300, 350, 400, 450, F460, I460, F560, I606 gas, LP, diesel, 656 Hydro Replaces: 350601R95, 370773R91, 403551R1 IHS313 (Vertical round body) dimensions: Inlet length: 2-1/2", Inlet I.D.: 2-3/8", Shell length: 13", Shell diameter: 6", Outlet length: 14", Outlet O.D.: 2-1/2", Overall length: 29" (If raincap is needed order IHS2567 or RCS007, if clamp is needed order ABC351) IHS2239 $33.10 236 $11.75 Fits: I9, W9, T9 gas, diesel, TD14 diesel, IH 600, 650 (C-350 gas, D-350 diesel engines) Replaces: 264116R91, 264117R91, 303973R91 IHS2701 $34.80 IHS315 (Vertical round body) dimensions: Inlet length: 3-1/2", Inlet I.D.: 3-1/8", Shell length: 14-1/2", Shell diameter: 6", Outlet length: 3-1/2", Outlet O.D.: 3", Overall length: 22" (If raincap is needed order RCS009, if clamp is needed order ABC2234) Fits: M, Super M, MTA, 400, 450 Replaces: 321574R91 (2.200" - 2.405" range) NOTE: Stainless steel. Fits IHS1926 muffler. IHS2296 $34.80 Fits the following gas, LP, diesel (unless noted): 340 diesel, 460, 504 diesel, 544, 560, 606, 656 gear drive, 660, TD340, (500 Crawler SN: H2371 & up), 3514, 3616 (2.450" - 2.560" range ) NOTE: Stainless steel. Fits IHS1933 muffler & IHS571 straight pipe. Fits the following gas, LP: 666, 686, H70, H86, 706, 766, 806, 826, 856; Diesels: (706 w/ D310 German diesel), 806, 856 Replaces: 530578R4 NOTE: Black finish. IHS2567 $12.50 Fits: 1066, 1466, 1566, 4366, 4386 up to SN: 2500, Replaces: 534546R6 NOTE: Black finish. Order # Price Fits the following pipe O.D.: IHS2291 $31.80 Fits: Cub, A, B, C, Supers, 100, 130, 200, 230 Replaces: 126114C1 (1.370" - 1.475" range) NOTE: Stainless Steel. Fits IHS1936 & IHS1940 mufflers. $12.50 IHS2294 $33.20 Fits: Cub, A, B, C, Supers, 100, 130, 200, 230 (All w/ restoration quality muffler only) Replaces: 126114C1 (1.370" - 1.475" range) NOTE: High temperature paint. Fits IHS497, IHS1212 & IHS1706 mufflers. Fits: H, I4, W4, Supers, 140, 240, 330, 340, 300, 404, 350, 2404 & 3414 mufflers Replaces: 378027R91 (Fits pipe O.D. of 1.700" - 1.810") NOTE: Stainless steel. Fits IHS1944 & IHS2569 mufflers. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fits: M, Super M, MTA, 400, 450 Replaces: 321574R91 (2.200" - 2.405" range) NOTE: High temperature paint. Fits IHS1923 muffler. Fits the following gas, LP, diesel (unless noted): 340 diesel, 460, 504 diesel, 544, 560, 606, 656 gear drive, 660, TD340, (500 Crawler SN: H2371 & up), 3514, 3616; Will also fit M, Super M, MTA, 400, 450 if equipped w/ IHS311 or IHS313 mufflers, but does not fit IHS1926 properly (2.450" - 2.560" range) NOTE: High temperature paint. Fits IHS311, IHS313, IHS1930 mufflers. RCS014 $34.80 (2-1/2" I.D.) USA made NOTE: Chrome plated. RCS015 $41.95 (3" I.D.) USA made NOTE: Chrome plated. RCS016 $45.95 (3-1/2" I.D.) USA made NOTE: Chrome plated. Restoration quality raincaps IHS2563 Fits: H, I4, W4, Supers, 140, 240, 330, 340, 300, 404, 350, 2404 & 3414 mufflers Replaces: 378027R91 (Fits pipe O.D. of 1.700" - 1.810") NOTE: High temperature paint. Fits IHS500 & IHS2535 mufflers. $12.50 IHS1769 (Vertical) dimensions: Inlet length: 12", Inlet I.D.: 3-3/4", Shell length: 23", Outlet length: 8-3/4", Outlet O.D.: 3-1/2", o/a length: 44" (If clamp is needed order ABC1771) Fits: 424, 444 gas, diesel; 504, 3514 gas only Replaces: 381665R92, 403825R1 NOTE: Silver finish. IHS2239 (Vertical round body) dimensions: Inlet length: 2-1/2", Inlet I.D.: 1-15/16", Shell length: 14-1/2", Shell diameter: 5-7/16", Outlet length 10", Outlet O.D.: 2", Overall length: 27" (If raincap is needed order RCS005, if clamp is needed order ABC327) IHS2565 Fits the following pipe O.D.: IHS3101 IHS1772 (Vertical) dimensions: Inlet length: 3-1/4", Inlet I.D.: 2-15/16", Shell length: 23", Outlet length: 8-1/4", Outlet O.D.: 3", o/a length: 34" (If clamp is needed order ABC585) IHS1769 $128.55 Price NOTE: Chrome; Double wall (Lined unless otherwised noted) Order # Price MHS050 $115.35 Exhaust Stack (Straight) fits: F20 (2-3/8" I.D., 3-1/2" O.D., 19" tall (chrome) + 2" tall base) USA made NOTE: If raincap is needed order RCS016. ABC351 $10.30 IHS571 (Straight) $89.95 Exhaust Stack fits: Cub (1.355" I.D., 2-1/2" O.D., 18" tall + 3" base) USA made NOTE: If raincap is needed order IHS2296. IHS571 IHS572 ABC341 $9.95 1-1/2" Chrome Clamp Fits: Same as IHS571, IHS572 NOTE: Original style. IHS582 (Straight) $115.35 IHS569 $125.95 (w/ Bend) NOTE: Painted. Price 2-1/2" Chrome Muffler Clamp Fits: Same as MHS050 (Fits pipe O.D. of 2.350" - 2.550" range) NOTE: Original style. IHS572 $115.35 (w/ Bend) Economy raincaps Order # Description / Application Engine parts Engine parts Fits the following gas: A, B, C & Supers, 100, 130, 140, 200, 230, 240, F330, F340, I340, T340, 404, 3414 gas Replaces: 360720R91 Order # Exhaust stacks, parts IH/Farmall IH/Farmall IHS309 Fits: 706 gas w/ C-263, (806 gas w/ C-301 & diesel w/ D-361), Replaces: 384345R1 IHS041 (Vertical round body) dimensions: Inlet length: 3-1/2", Inlet I.D.: 2-15/16", Shell length: 17", Shell diameter: 5-1/2", Outlet length: 14", Outlet O.D.: 3", Overall length: 34" (If raincap is needed order RCS009, if clamp is needed order ABC585) IHS2660 (Horizontal round body) dimensions: Inlet length: 2-1/8", Inlet Dia.: 1-1/2" pipe thread", Shell length: 6", Shell diameter: 3.170", Outlet length: 5", Outlet O.D.: 1", Overall length: 14-1/8" IHS317 Application Restoration quality raincaps cont... Exhaust Stack fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, F & I 330 & 340, T-340 Crawler (2" I.D., 3" O.D., 24" tall + 3" base) USA made NOTE: If raincap is needed order RCS015. Fits the following pipe O.D.: RCS002 $9.65 (1-1/4" - 1-7/16" I.D.) RCS003 $9.80 (1-1/2" - 1-11/16" I.D.) IHS582 IHS569 RCS004 $9.95 (1-3/4" - 1-15/16"I.D.) ABC2519 $14.95 RCS005 $10.35 (2" - 2-3/16" I.D.) RCS006 $10.75 (2-1/4" - 2-7/16" I.D.) RCS007 $10.95 (2-1/2" - 2-11/16" I.D.) RCS008 $9.00 (2-3/4" - 2-15/16" I.D.) RCS009 $13.35 (3" - 3-3/16" I.D.) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 2" Stainless Steel Clamp Fits: Same as IHS582, IHS569 Exhaust stacks, parts continue on next page 237 Choke parts cont... Exhaust stacks, parts cont... NOTE: Chrome; Double wall (Lined unless otherwised noted) Order # Price IHS581 (Straight) $115.35 Description / Application ABC351 $10.30 IHS241 2-1/2" Chrome Muffler Clamp Fits: Same as IHS581, IHS568 (Fits pipe O.D. of 2.350" - 2.550" range) NOTE: Original style. $244.95 IHS699 ABC423 ABC423 Exhaust Stack w/ Bend fits: 1026, 1066, 1206, 1256, 1456, 1466, 1566, 4166, 4366, 4386 (3-3/4" I.D., 5" O.D., 36" tall + 8" base) USA made NOTE: Chrome, Double-wall. IHS990 $19.95 $9.95 $9.95 End view NOTE: Check cables' length before ordering. Price $15.95 ABC3210 $16.50 Choke parts Order # Description / Application Metal Sheathed Choke Cable fits: F300, F350, 656, 666, 686, 706, 756, 826, Hydro 70, Hydro 86 gas, Replaces: 363709R95 (64" long) NOTE: Restoration quality. ABC2426 $6.50 Description / Application $18.95 Metal Sheathed Choke Cable fits: Cub LoBoy 154 SN: 14536 & up, 184, 185 Replaces: 529926R1 (30" long) NOTE: Restoration quality. IHS1250 JDS718 IHS252 238 $19.95 $19.95 $16.95 Choke Control Rod fits: Super A, Super AV, 100; Serviceable for 130, 140 if bends are modified, Replaces: 350744R1; 366732R1 (44-3/8" length, 3/16" O.D.) USA made Metal Sheathed Choke Cable fits: IH / Farmall models w/ 47" or less cable NOTE: Metal sheathed w/ "CHOKE" on knob. Cut to length. Choke Cable fits: IH 340, 404, 424, 444, 504, 2424, 2444, 2504, 3444 Replaces: 371796R92 (55" long) Metal Sheathed Choke Cable fits: F400, F450, W400, W450, 560, 660; The following LP tractors: 706, 756, 806, 826, 856 Replaces: 374218R92, 363710R93 (71" long) NOTE: Restoration quality. Metal Sheathed Choke Cable fits: Farmall 460, 656 LP Row-Crop, 766, 806, 856, 2806, 2856, Replaces: 374219R93 (69" long) NOTE: Restoration quality. Universal Choke Cable fits: Tractors, Forklifts & other Applications (72" long) NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines. Universal Choke Cable fits: Tractors, Forklifts & other Applications (72" long) NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines. NEW! Universal Engine Stop Cable (Diesel Fuel Shut Off) fits: Tractors, Forklifts & other Applications using 96" or less cable NOTE: Nylon sheathed. Cut to length. Choke or Fuel Shut Off Cable Clip (For Marvel Schebler choke cable bracket) Fits: 330, 340, 404, 424, 444, 454, 504, 544, 574, 656, 666, 674, 686; Also works for diesel fuel cable shut off for 664, 826 Replaces: 373373R1 NOTE: See website for a complete listing of applications & carburetor numbers. Order # IHS240 Price $28.95 $14.95 Idle Tube (Pick up Tube) fits: Cub (194774) w/ IHC carburetor Replaces: 251331R1, 352140R1 (.1085" dia. x 1.795" long) USA made IHS1461 $14.95 Main Jet fits: Cub (1947-56) w/ IHC carburetor, Replaces: 351804R1, 354192R91 (.375" hex x .940" long w/ 0.030" jet) USA made IHS1463 $14.95 Main Jet fits: Cub (1957-74) w/ IHC carburetor, Replaces: 364610R91 (.375" hex x .940" long w/ 0.035" jet) USA made IHS1460 $20.75 Main Nozzle fits: Cub (1947-56) w/ IHC carburetor w/ small bore Replaces: 352138R31 (.3125" hex x 1.777" long x .122" tube w/ .060" hole) USA made NOTE: Brass; Has 4 discharge holes. IHS1462 $20.75 Main Nozzle fits: Cub (1957-78) w/ IHC carburetor w/ large bore Replaces: 251332R11 (.3125" hex x 1.777" long x .122" tube w/ .100" hole) USA made NOTE: Brass; Has 6 discharge holes. IHS417 184, 185 (All w/ engine SN: 312390 & up) Replaces: 70949C92, Zenith 13781, 13794 (1-1/64" throttle bore) USA made NOTE: On older Cubs, customer may have to use (2) ABC543 carb gaskets to clear the butterfly. IHS905 $395.85 Carburetor (New, Zenith) fits: A, AV, IHS738 Price IHS420 $289.95 Description / Application $295.00 Carburetor New, IHC Replacement Fits: Cub, Cub Loboy w/ up to engine SN: 312389, Early 154, Replaces: 63349C91, 251234R94, 251293R91, 364579R91 (1-13/16" c.c carb mounting holes, 15/16" throttle bore) NOTE: Looks like original IHC carburetor. Does not include IHS240 choke lever. Also fits Cub carb's w/ 'IH' on float bowl. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS2709 Price $23.95 $22.50 New Carburetor (New Marvel Schebler Style) fits: A, AV, B, BN, C, Super A, Super C, Replaces: Replaces TSX 156, 157, 319, 333; Zenith 9749, 9752 (2-3/8" c.c. stud holes) Description / Application Main Nozzle (For Marvel Schebler carburetor) fits: A, AV, B, BN, C, U2 Power Unit, Replaces: 69968D, Marvel Schebler 47-270 NOTE: Fits above carburetor ABC297 $7.50 ABC513 $2.50 ABC1159 $5.00 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: A thru Super C using Marvel Schebler carburetor (Male end (Screen end) - 1/8" pipe thread; female end - 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting; not compression fitting. Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetor) Fits: A, B, C series & Supers, 100 thru 444 (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size. Throttle Disc (For Marvel Schebler carburetor) fits: A, AV, B, BN, C, U2 w/ TSX156, 157, 171, 198, 319 Replaces: 69944D (15°, 1.105" O.D.) USA made ABC223 $395.00 Carburetor (New, Zenith (12522) ABC564 $26.40 Replacement) fits: A, B, BN, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404 Crawlers: 500, T-340, T4, T5 Windrower: U-2, 201, Replaces: TSX 156, 157, 171, 198, 319, 333, 347, 348, 730, 744, 748, 827, 926; Zenith 9749, 9752, 10514, 11115, 12911, 12122, 12115, 12285, 12225, 12475, 12522, 16232 USA made NOTE: Has 1-1/8" throttle bore. For some applications you must trim throttle shaft to clear the block. Will fit 2-5/16" - 2-3/8" c.c. stud holes because of the smaller dia. studs that are included. B, BN, C, Super A, Super C, 100, 130, 200, 230, Replaces: 52499D, 375560R91, 377600R91; TSX 156, 157, 319; Zenith 9749, 9752, 12115, 12122, 12123, 12225, 12285, 12475, 12522, 12613, 14007 (2-3/8" c.c. stud holes) USA made NOTE: Direct bolt on. See website for all carburetor numbers. NOTE: Carburetors are limited to replacement only - NO Order # Order # ABC1156 $299.95 Carburetor (New, Zenith) fits: Cub, 154, Can't find your carburetor number? Look on page 344A. in the carburetor or if it has been taken apart. Choke Lever w/ Screw fits: Cub, Cub LoBoy (not 154, 184, 185) Replaces: 351324R1 IHS1465 Carburetors, parts refunds. No replacement will be given if dirt, rust, etc. is found Description / Application Choke Lever w/ Screw fits: A, B, BN, C, Supers (All using Zenith or Marvel Schebler w/ splined choke shaft) Replaces: 8639D NOTE: See website for carburetor numbers. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Main Jet Adjusting Needle Assembly (For Zenith carburetors) fits: Some A, B series w/ 8928, 9167, 9749, 9752, 11776; C w/ 10441, A; Super A w/ 10522, A, 11339, A; Super C w/ 11340, A, 14008; 100 thru 230 w/ 12341, A, B, 12342, A, B, 12632; Power Units U-169 w/ 11927, U-263 w/ 12747, Replaces: 53786D, B51326 (3/8" x 24" thread) USA made Carburetors, parts continue on next page 239 Engine parts Engine parts IHS568 IHS250 Price $14.95 Carburetors, parts cont... IH/Farmall IH/Farmall Exhaust Stack fits: H, M & Supers, I, O, T, W4, 6 series gas, diesel, 300, 340 IHS568 $125.95 diesel, 350, 350 Utility, 400 gas, diesel, (w/ Bend) 450 gas, LP, diesel, I & F 460 gas, diesel, 560 gas, LP, diesel, 606 C-221 gas, diesel, 706 diesel w/ D282 engine, 660 gas, 656 gas, diesel, 544, 454, 574, 674 gas, diesel (2-3/8" I.D., 3-1/2" O.D.,24" tall (chrome) + 3" tall base)) USA made NOTE: If raincap is needed order RCS016. IHS581 Order # IHS705 Carburetors, parts cont... Carburetors, parts cont... Carburetors, parts cont... Can't find your carburetor number? Look on page 344A. Order # IHS966 (1/4" line) IHS1124 (5/16" line) IHS2622 IHS1386 IHS1358 IHS1359 IHS1357 240 $25.25 Carburetor Elbow w/ Strainer Assembly (For Carter Marvel Schebler & Zenith carburetors) fits: A, B, C & Supers, 100, 130, 140, 154, 184, 185, 200, 230, 240, 330, 340, 404, 444, 504, 2444, 3514, T4, T5, T340 Replaces: IHS1124 Replaces: 53796D, 69938D, 354827R91 (IHS966 is not factory) USA made NOTE: Check line size before ordering. Both fittings measure 1/8" male pipe thread size at the end that threads into the carburetor. The IHS966 is for 1/4" O.D. fuel line. The IHS1124 is for 5/16" O.D. fuel line. Both include one fuel line fitting. $25.25 $285.00 $22.50 $2.95 $24.95 $14.50 $18.95 $14.50 NEW! Carburetor (New, IHC Replacement) fits: H, HV, I4, O4, W4 Replaces: 45108DB, 45108DC, 45108DE, 50981DA, 50981DB, 50981DC, 50981DD Carburetor Fuel Line Fitting w/ Strainer (For IHC carburetor) fits: F12, F14, H, M, MD, MTA, & Supers, I, O, T, W4 thru W9 series, 300 thru 856, 3616; Combines: 303 thru 715, Replaces: 29902DX (1/4" pipe to 5/16" flare) Carburetor Fuel Line Fitting fits: 5/16" line; Cub thru 856, Replaces: 29899D, 58362DBX (1/4" NPT) USA made Throttle Shaft (For Carter UT series carburetor) fits: Super A, C, Super C, 100, 130, 200, 230 w/ cast iron upper body carb 733, 733S, 733SA, 733SB, 734, 734S, 771, 771S, 771SA, 771SB, 2701S Replaces: 354805R91, R92, Carter 3-662S (.249" O.D., 2.475" machined length) Throttle Shaft (For IH carburetor) Fits: H, HV & 4 series (All w/ carb 45108DB, 45108DC, 50981D) Replaces: 45112DAX (2.875" shaft length) NOTE: Has steel governor drive keyway. Throttle Shaft (For IH carburetor) Fits: Super H, M, 6, 9 series & Supers, MTA, 600, 650, (F300 thru 450 distillate, kerosene), Replaces: 54488DAX (3.314" shaft length) NOTE: Has steel governor drive keyway. Throttle Shaft (For IH carburetor) Fits: M, MV & 6 series w/ IH carb 50983D & throttle body 6513D Replaces: 47389DAX, 47389DX (3.195" shaft length) NOTE: Has steel governor drive keyway. Order # Price ABC1182 $18.50 IHS2670 $34.95 ABC1167 ABC230 ABC133 IHS995 IHS377 IHS968 $13.25 $6.45 $6.15 $58.95 Description / Application Choke Disc (For Marvel Schebler carburetor) fits: 330, 340 w/TSX748, 827 Replaces: 373370R91, 27-530, 27-539 (1-5/16" O.D.) Venturi fits: H, HV, I4, O4, OS4, U4, W4 w/ carb # 45108D or 50981D Replaces: 45118D, 64986D NOTE: Zinc, like original. Venturi (For Marvel Schebler carburetor) Fits: U2, 330, 340 w/ TSX171, 748, 827 Replaces: 69958D, 46-467 (11/16" dia. throat) NOTE: Plastic. VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340 (All w/ TSX 156, 157, 171, 198, 319, 333, 348, 730, 744, 748, 827, 926, 930, 948, 949), Replaces: 69956D, 382499R91 (.080 orifice) USA made NOTE: Viton needle & seat helps stop carb flooding. VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: Late 424, 444, 454, 504, 544, 574, 656, 666, 674, 686 (All w/ TSX 896, 927, 933, 934, 959, 974, 975), Replaces: 392096R91 (0.100" orifice) USA made NOTE: Viton needle & seat helps stop carburetor flooding. Carburetor Float Valve Assembly Fits: MD series, ID, OD, TD, WD6 thru 9 series, 400D thru 650D series (All diesels w/ F8 starting carburetor) Replaces: 32581DXB USA made Order # Price ABC543 $1.95 ABC408 $1.39 ABC410 Application / Dimensions Manifold to Carburetor Gasket (For IH carburetor) fits: Cub up to SN: 196899, Early 154, Replaces: 251235R1 (1-13/16" c.c. bolt holes, 15/16" center hole) USA made Manifold to Carburetor Gasket Fits: A, B, C, Supers, F12, F14, 100, 130, 140, 200, 230, 240, 330, 340, 404 Replaces: 382116R2 (2-3/8" - 2-7/16" slotted bolt holes, 1-1/8" center hole) USA made Order # Price NEW! Carburetor Gasket Kit (For small bowl Marvel Schebler carburetors) fits: A, B (Both w/ TSX 156, 157); Super A, Power Units (All w/ TSX 156, 157, 171, 198, 333, 348, 926); C w/ TSX319; Super C w/ TSX333; 130, 140 (Both w/ TSX 730, 864); 200, 230, 240 (All w/ TSX744); 340 w/ TSX 748; 404 w/ TSX 748, 827; 424, 444 (Both w/ TSX896SL); 500C w/ TSX 930, 948, 949; 2444 w/ TSX896, Replaces: 373359R91 (4-5/16" o/a length bowl gasket) USA made ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) Fits: Some 454, 464, 504, 544, 574, 656, 666, 674, 686, Replaces: 400429R93 (5" Bowl gasket length) USA made NOTE: Fits same carb numbers as FDS212 economy kit. $1.39 Manifold to Carburetor Gasket Fits: IH/Farmall models (2-15/16" c.c. bolt holes, 1-3/4" center hole) USA made ABC416 ABC424 IHS2283 $1.50 $1.39 Manifold to Carburetor Gasket Fits: B250, B275, B414, H, W4, 354, 434, 454, 464, 574, 674, 2400A, 2400B, 2500A, 2500B, 3400A, 3414, 3500A, Replaces: 24520DA, 3047295R91 (2-3/8" c.c. bolt holes, 1-5/16" center hole) USA made Manifold to Carburetor Gasket Fits: F30, W30, Super H, M, Super M, MTA, 300, 350, 400, 450, 460, I6, W6, Super W6, W9, T6, T9, 504, 560, 656, 666, 686, 706, 756, 766, 806, 826, 856, Replaces: 21632D, 530681R2 (2-11/16" c.c. bolt holes, 1-1/2" center hole) NOTE: Import. Perforated steel core. $3.95 Carburetor Gasket Kit Fits: H Series, I4, O4, W4 all w/ 45108, 50981 carbs, Replaces: 46370D, 24520DA, 18377D, (2) 25948D, 45142D USA made Carburetor floats Order # Price $30.95 IHS2279 Throttle Shaft (For original British Zenith carburetor) fits: 2300A, B250, B275, 276, B414, 354, 434, 444, 2300, 2444, 3414, 3444 & 7000 Fork lift (All w/ BC 144 engine & carb VN, VNN, VNP) Replaces: 3047470R1 USA made NOTE: Will not fit IHS377 carburetor. IHS997 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $3.95 $14.95 Carburetor Gasket Kit fits: Super H, M & Supers, MTA, I, O, T, U, W6 Series, 300, 350, 400, 450, 460, 544, 560, 600, 606, 650, 656, 660, 706 thru 856, Replaces: 18377D, 25948D, 31336D, 32615D, 47388DA, 47401D, 387454R92 NOTE: All using IH carbs. 2-Piece Gasket Kit fits: MD series, ID, OD, TD, WD6 thru 9 series, 400D thru 650D series (All diesels w/ F8 starting carburetor), Replaces: 53459DA, 32606DD USA made Application For Original IHC carburetors IHS360 $52.75 IHS618 $29.95 Fits: Farmall "Regular", 10-20 McCormick Deering, Replaces: 16876 (1.982" O.D., 0.964" I.D., 0.285" wide slot, 0.665" thick) NOTE: Cork Fits: F12, F14, I, O, W12, W14 Replaces: 25945D (1.760" O.D., 1.000" wide) IHS575 $78.50 IHS204 $19.95 Fits: F20, (IH F20 w/ carb 6392), T20, (F30, W30 - both using K5 carburetor) Replaces: 21170D Fits: Cub & Early 154 using IH carb Replaces: 251293R91 (1.405" O.D., .790" wide) $498.50 Carburetor (Down Draft) fits: 2300 series A, B250, B275, B414, 276, 354, 434, 444, 2444, 3414, 3444, 7000 Forklift (All w/ BC-144 British engines), Replaces: 3063945R91, 3044193R92 & Zenith C1759 USA made NOTE: Looks different, works great! If carburetor gasket is needed order ABC416. Application / Dimensions ABC3233 $3.50 IHS203 $19.95 IHS387 $22.50 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fits: H, W4, I4, O4 Replaces: 45114D (1.550" O.D., .773" I.D. wide) Fits: Farmall Super H, M & Supers, I, O, T, W6 series, W9, 300, 350, 400, 450, 460, 544, 560, 574, 606, 600, 650, 656, 660, 666, 674, 706, 756, 766, 806, 826, 856, 2500 gas Replaces: 47398D Carburetor floats continue on next page 241 Engine parts Engine parts IHS972 Description / Application Carburetor gaskets cont... IH/Farmall IH/Farmall IHS3383 Price Carburetor gaskets Carburetor floats cont... Order # Price Carburetor repair kits Can't find your carburetor number? Look on page 344A. Application Economy carburetor repair kits contain: Needle & seat, float For Carter carburetors ABC522 lever pin, seal, gaskets & instructions. $38.50 Fits: C, Super A, Super C, 200, 230, 240 Replaces: 21121S, 354813R91 NOTE: All w/ cast iron throttle bodies. IH/Farmall Engine parts Fits: 454, 464, 544, 574, 674 (All w/ TSX959), 504, Hydro 70, Hydro 86, 686, 2400, 2500A, 2500B, 3514; Power Unit w/ TSX925, 932, 932SL, 933, 939; Combines: 105, 203, 205, 315 (w/ TSX 857, 927, 933, 934, 939, 940, 946, 959, 974, 980, 984SL, 985 SL), Replaces: 381962R1, C85-156 Fits: Cub, Cub LoBoy, A, B, C & Supers, 100, 130, 140, Late 154, 200, 230, 240, 330, 340, 404, Power Unit (All w/ Zenith 8928, 9167, 9318, A, 9722, 9748, 9749, 9750, 9751, 9752, 10386, A, C, 10441, A, 10498, 10514, A, 10522, A, 10652, 11985, 11115, A, 11188, 11338, A, B, C, 11339, A, 11340, A, 11548, 11704, A, B, 11776, 11812, A, 11882, 12020, 12115, 12122A-C, 12123, A, B, 12193, A, 12225, A, B, 12285, A, 12340, 12341, A, B, 12342, A, B, 1247S, 12612, 12613, 12632, 0-12911, 0-13028, 0-13056, 13781, 13794, 14007) Replaces: 53783D, C85-28 $22.15 Economy Carburetor Repair Kit (For IHC carburetors) fits: Cub, Early 154 (Both w/ 63349C91, 364579R91, 251234R94, 251293R91) USA made NOTE: Fits carbs w/ 'IH' emblem on float bowl. ABC1346 $25.70 Economy Carburetor Repair Kit (For Zenith carburetors) fits: Cub, Cub LoBoy, 154, 184, 185, A, B, C, Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 500 Crawler (All w/ carb 8928, 9167, 9318, A, 9748, 9749, 9750, 9752, 10386, A, C, 10441, A, 10498, 10514, 10522, A, 10652, 10998, 11115, A, D, 11188, 11888 A, C, 11338, A, 1338B, C, 11339, A, 11340, A, 11548, 11704, A, B, 11867, 11882, 12020, 12115, 12122, 12123, 12193, 12225, 12285, 12340, 12341, 12342, 12475, 12476, 12612, 12613, 12632, 12750, 12911, 13028, 13056, 13415, 13542, 13781, 13794, 14007, 14008) Replaces: 385608R91 USA made NOTE: Fits 61, 68, 161 series Zenith carbs. ABC220 $22.50 $23.60 ABC1387 $35.75 Fits: 606 w/ 13021, or 389511R92 carburetor, Replaces: 55589D 242 Description / Application ABC228 Fits: 444, 504, 544, 666 (All w/ Zenith 12351, 12685, 12758, 13024, 13384, 13716); 3514 w/ Zenith 13396; Power Units w/ Zenith 13406, 13465, 13588 ABC454 $24.95 drain petcock, gaskets, fuel strainer & more. Economy carburetor repair kits $36.50 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: A, B w/ TSX 156, 157; Super A, Power Units w/ TSX 156, 157, 171, 198, 333, 348, 926; C w/ TSX319; Super C w/ TSX333; 130, 140 w/ TSX730, 864; 200, 230, 240 w/ TSX744; 340 w/ TSX 748; 404 w/ TSX 748, 827; 424, 444 w/ TSX896SL; 500C w/ TSX 930, 948, 949; 504 w/ TSX857; 2444 w/ TSX896 USA made Economy Carburetor Repair Kit (For Carter carburetors) fits: Super A, Super AV, 100, 130, 140, 200 w/ aluminum upper throttle body #0-1146, #0-1178, 0-1397 w/ carb UT, UT2257S, UT26125 & OEM carb 373957R91, 373959R91, 373961R91, 373962R91 (7/16-24 special fine thread seat) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price IHS2991 $58.50 ABC311 ABC1344 ABC1349 FDS212 $22.95 $18.95 $24.95 $22.25 Economy Carburetor Repair Kit (For IHC carburetors) fits: F12, O12, W12; F14, O14, W14 (All w/ OEM carbs 24707 B, C OR D, 29953D, 29954DB) Economy Carburetor Repair Kit (For Zenith carburetors) fits: Power Units U169, U220, U240, U269, U282 (All w/ carb 11175,A, B, 11176,A, B, 11237,A, 11237D, 11670, 11697, 11698, 11927, 11978, 12106), Replaces: 262523R92, 262526R92, 262525R92, 269477R91, 270802R91, 270804R91, 274648R91 USA made Economy Carburetor Repair Kit (For IHC carburetors) fits: Super H w/358065R91, 358554R91; M w/ 47387DC, 50983DC; Super M, MTA w/ 356948R92, 357231R92; I9, T9, W9, Super W9, WR9S w/52814D, 52815D, 60329DA, 61798D; 300, 350 (w/ 361525R92, 363741R93); 400 w/ 362173R92; 450 w/ 362957R91; 460 w/ 367258R92, 380956R96; 544 w/ 406803R91; 560 w/ 352063R91, 367259R92, 381984R9; 600, 650 w/ 366066R91; 606 w/ 380956R91; 656 w/ 386424R96, 388296R92, 388297R94; 660 w/ 372723R92, 379813R95; 706, 756, 806, 826, 856 w/ 352063R91, 378196R94, 381419R91, 381420R91, 387182R92, 388424R96, 388425R96, 396197R93, 396198R1, 534932R1, 533622R91, 534933R91; 766 w/ 539575R91; 2544 w/ 406804R91; Combine w/ 379813R95 USA made NOTE: Fits IH carbs only. Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 504, 3514 w/ TSX857 USA made Economy Carburetor Repair Kit (For Zenith carburetors) fits: 444, 504, 666, 686, 756, 766, 2444, 3514, Hydros: 70, 86; Combines: 93, 105, 203 (All w/ 12351, 12685, 12758, 13384, 13406, 13465, 13588, 13716), Replaces: Zenith K2048, K2049, K2050, K2136 USA made Economy Carburetor Repair Kit (For Marvel Schebler carburetors) fits: 454 w/ TSX 959; 504 w/ TSX 857; 544 w/ TSX 934; 574 w/ TSX 959; 656 w/ TSX 927; 666 w/ TSX 974, 975; 674 w/ TSX 959; 686 w/ TSX 974; 2504 w/ TSX 857; 2544 w/ TSX 934; 3514 w/ TSX 857, 943, 959; Power Units w/ TSX932, 932SL, 933, 939, 940, 984SL USA made Application Economy carburetor repair kits cont... Economy Carburetor Repair Kit (For IHC carburetors) fits: B250, B275, B414, 276, 354, 434, 444, 2300, 2300A, 2444, 3414, 3444, (7000 Forklift) w/ BC144 engines using VN, VNN, VNP, 3044193R92, 3063945R91, 3106595R91 carburetors USA made NOTE: Includes needle & seat, gaskets & instructions. Basic carburetor repair kits IHS574 $54.70 IHS820 $29.95 ABC467 $34.50 ABC145 $34.50 ABC147 $45.25 Basic Carburetor Repair Kit (For K5, K5A Zenith carburetors) fits: F20, T20 (w/35539D), F30, W30 (both w/ K5, K5A carb), Replaces: 6392, 21271D, 20590D, 21950D, 29472D, 37449D Basic Carburetor Repair Kit (For IHC carburetors) fits: Cub w/ 63349C9, 251234R94, 251293R91, 364579R91 USA made NOTE: Includes throttle shaft, choke & throttle shaft seals, needle & seat, gaskets, idle adjustment screw. Fits carburetors w/ 'IH' emblem on float bowl. Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: A, B, BN, Super A, Super C (All w/ TSX 156, 157, 319, 333) Engine parts ABC452 $15.75 ABC1348 metering nozzle, brass plugs, float pin, stainless needle & seat, For Zenith carburetors ABC190 $32.50 shaft, bowl nut spring, throttle shaft bushings & packing, Price Order # Basic Carburetor Repair Kit (For Zenith carburetors) fits: A, B, BN, Super A, AV (All w/ 9748, 9749, 9752, 10514A) USA made Basic Carburetor Repair Kit (For Zenith carburetors) fits: Super A, Super C (both w/ 11115) ABC231 $39.50 ABC162 $23.50 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com IH/Farmall $19.95 IHS729 Complete carburetor repair kits contain: Choke & throttle Order # Application Carburetor repair kits cont... Economy carburetor repair kits cont... Premium carburetor repair kits contain throttle plate, throttle $12.50 Fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, 424, 444, 504 (All w/ TSX 156, 157, 319, 333, 348, 744, 748, 827, 864, 896, 926; U2 Power Units w/ TSX 171, 198; Crawlers: T340, T5, 500 Replaces: 69919D ABC037 Price seat, float lever pin, seal, gaskets & instructions. & screws, throttle shaft seals, adjustment screw & gaskets. For Marvel Schebler carburetors Order # Basic carburetor repair kits contain: Throttle shaft, needle & shafts, needle & seat valve, float lever pin, miscellaneous plugs ABC036 Carburetor repair kits cont... Basic Carburetor Repair Kit (For Carter carburetors w/ cast iron upper body) Fits: Super A SN: 255418 & up, C, Super C, 100, 130, 200, 230 (w/ UT734S, UT652, UT771SA), Replaces: 76769R1 (5/16" - 24 UNF fine thread seat) Basic Carburetor Repair Kit (For IHC carburetors) fits: H, HV, 4 series (All w/ 45108DB, 45108DC, 45108DE, 50981D, 50981DD) USA made Carburetor repair kits continue on next page 243 Carburetor repair kits cont... Carburetor repair kits cont... Can't find your carburetor number? Look on page 344A. Basic carburetor repair kits contain: Throttle shaft, needle & seat, float lever pin, seal, gaskets & instructions. Order # Price Application $46.95 Complete carburetor repair kits contain: Choke & throttle shafts, needle & seat valve, float lever pin, miscellaneous plugs & screws, throttle shaft seals, adjustment screw & gaskets. Premium carburetor repair kits contain throttle plate, throttle metering nozzle, brass plugs, float pin, stainless needle & seat, ABC146 Price IHS1896 $30.75 Description / Application IH/Farmall Basic Carburetor Repair Kit (For IHC carburetors) fits: Super H w/ 358065R91 or 358554R91; (M, MV, W6, I6, O6 All w/ 50983D & Throttle Body 8557D or 8867D); (Super M, MTA, Super W6 All w/ 356948R92); (W9, WR9, I9 All w/ 52814D, 52815D, 60329D); (300, 350, 400, 450, W400, W450 All w/ 361525R92), 600, 650 (3.314" throttle shaft length) IHS3206 ABC463 $44.10 Basic Carburetor Repair Kit (For IHC carburetors) fits: 460, 560, 606, 660 w/ 367258R92, 372723R92, 380956R94, 381984R91 NOTE: Original style throttle shaft w/ cast iron arm pinned to steel shaft. NEW! Basic Carburetor Repair Kit Fits: 560, 656, 660, 706, 756, 766, 806, 826, 856 w/ 378196R91, 379813R91, 381420R91, 388296R91, 388297R91, 388424R91, 388425R91, 396197R91, 396198R91, 533621R91, 533622R91, 539575R91, (R92, R93, R94, R96) $74.50 Complete Carburetor Repair Kit (For Zenith carburetors) Fits: A, B, Super A, AV, C (All w/ 9752) ABC144 ABC182 $61.80 $61.40 $72.50 IHS3328 $74.50 NEW! Premium Carburetor Repair Kit Fits: M, MV, 6 series (All w/ carb 47387D, 47387DB, 47387DC, 50983D, 50983DB, 50983DC, 50983DD & throttle body 8557D, 8557DX, 8867D), Replaces: 354453R93 (3.314" throttle shaft length) NEW! Premium Carburetor Repair Kit Fits: Super M, Super MTA, Super W6, Super W6TA (All w/ carb 356948R91, 356948R92, 357231R91, 357231R92) Replaces: 354453R91 (3.314" throttle shaft length) Description / Application $176.75 Governor Assembly fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, T340, T5, 404, 424, 444, 500 Crawler, 504, 2424, 2444, some 3514 gas, Replaces: 375778R11, 374710R1 NOTE: 33 teeth. IHS2392 $8.95 Governor Spring fits: Cub, Cub LoBoy (except 154, 184, 185), Replaces: 251464R1, 121709C1 (1.572" o/a length, 0.735" body O.D., 0.100" wire dia.) USA made IHS2400 $7.95 Governor Spring fits: 154, 184, 185, 240, 330, 340, 504, 3514, T4, T5, T340 Replaces: 369686R2 (1.748" o/a length, 0.689" body O.D., 0.093" wire dia.) USA made IHS884 $8.95 Governor Spring fits: A, Super A, B, 100, 130, 404, Replaces: 46944DA (.085" wire dia., 2.088" o/a length, .560" dia.) USA made NOTE: Internal. IHS3368 $7.95 NEW! Governor Spring fits: 140 Replaces: 364113R1, 389987R1 (1.957" o/a length, 0.077" wire dia., 0.552" dia.) USA made IHS985 $8.95 Governor Spring fits: C, Super C, 200, 230 (All w/ C-123 engine SN up to 65000) Replaces: 69235D (.085" wire dia., 1.960" o/a length, .560" dia.) USA made NOTE: Internal. IHS878 $8.95 Internal Governor Spring fits: H, M series, Supers, MTA; I, O, T, W4 thru 9 series, 300, 350, 400, 450 (All w/ gas, LP) Replaces: 49407DBX, 357012R1 (2.700" o/a length, .110" wire dia.) USA made NOTE: Internal. IHS3320 $14.50 NEW! Governor Spring fits: 454, 464, 544, 574, 606, 656, 666, 674, 686, 706, 756, 766, 806, 826, 856, 2400A, 2500A, 3400A, 3500A, 3514, 3616, Hydro 70, Hydro 86 gas, Replaces: 384588R1 (3.729" o/a length, 0.100" wire dia., 0.697" body O.D.) USA made IHS672 $29.95 IHS247 $32.30 IHS2559 $38.95 Fuel pump repair kits - USA made Not for use w/ methanol blended gas. IHS165 (Basic) & IHS164 (Complete) kits contain: Diaphram, mounting gasket, fuel bowl screen & gasket. springs, retainers & packings. IHS164 (Complete) kit also contains: Diaphram shaft, pivot shaft, plungers & springs, retainers & packings & caged valve. Order # Price IHS165 $62.75 Complete Carburetor Repair Kit (For IHC carburetors) fits: M, MV, 6 series w/carb 50983D, throttle body 8557D or 8867D (3.314" throttle shaft length) Complete Carburetor Repair Kit (For IHC carburetors) fits: M, MV, 6 series, w/ carb 50983D or 43787D BOTH w/ throttle Body 6513D only (3.195" throttle shaft length) NEW! Premium Carburetor Repair Kit Fits: H, HV, I4, O4, OS4, W4 (All w/ 45108DB, DC, DD, DE, 50981D, DB, DC, DD) NEW! Premium Carburetor Repair Kit Fits: Super H, Super HV, Super W4 (All w/ carb 358065R91 or 358554R91) Replaces: 354453R93 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Basic Fuel Pump Repair Kit fits: F12, F14, I9, I12, O12, O14, T9, W9, W12, W14 NOTE: For Early & Late Pump. IHS854 $64.95 Premium carburetor repair kits IHS3164 NEW! Premium Carburetor Repair Kit Fits: M, MV, 6 series (All w/ carb 47387D, 47387DB, 47387DC, 50983D, 50983DB, 50983DC, 50983DD & throttle body 6513D, 6513DX), Replaces: 354453R93 (3.195" throttle shaft length) Order # IHS854 (Complete) kit also contains: Pivot shaft, plunger, $54.95 Complete Carburetor Repair Kit (For IHC carburetors) fits: H, HV, 4 series (DISTIL.) w/ 45108D, 50981D ABC181 $74.50 Complete Carburetor Repair Kit (For Zenith carburetors) Fits: A, B, Super A, AV (All w/ 10514A); 100, 130 (Both w/ 11340, 11704) $53.95 $27.10 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 454, 464, 574, 674, 2400A, 2400B, 2500A, 2500B (All w/ TSX 939, 984SL, 985SL) 244 ABC179 $49.10 $27.25 $44.10 IHS3323 $74.50 Price IHS748 IHS164 $108.95 Complete Fuel Pump Repair Kit fits: F12, F14, I9, I12, O12, O14, (W9 up to SN: 31732), W12, W14 NOTE: For early & original (O.E.M.) AC replacement pump (24527D) w/ a hair spring check valve. The diaphram is attached onto the shaft w/ nut. Complete Fuel Pump Repair Kit fits: F12, F14, I12, O12, O14, T9 SN: TCBM9441 & up, W9 SN: 31733 & up, W12, W14 NOTE: For late AC replacement pump (1521394 & 1539555) w/ a caged check valve. The diaphram is peened onto the shaft. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Governor Arm (Cast Steel) Fits: A, B, C & Supers, 100, 130, 200, 230 Replaces: 6507DA NOTE: New & improved. Governor Throttle Rod (To Carburetor) Fits: M thru 450 gas, LP Replaces: 49788DXA USA made Governor Throttle Shaft Rebuild Kit Fits: H, M, Supers, MTA, I, O, T, W4, W6 series, Supers, 300, 350, 400, 450 gas, LP NOTE: See website for contents & complete applications. 245 Engine parts Engine parts ABC142 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 200, 230, 240, 330, 340 (All w/ TSX 744, 748) USA made ABC469 IHS3319 IHS3332 Basic Carburetor Repair Kit (For IHC carburetors) fits: I6, M, MV, O6, W6 series w/ carburetor 47387DB, 50983DB & throttle body 6513DX (3.195" long throttle shaft) Application Premium carburetor repair kits cont... Governor, parts IH/Farmall ABC203 $26.75 Price Complete Carburetor Repair Kit (For Zenith carburetors) Fits: A, B, BN (All w/ 8808) USA made Basic carburetor repair kits cont... ABC465 Complete Carburetor Repair Kit (For IHC carburetors) Fits: Cub w/ 63349C9, 251234R94, 251293R91, 364579R91 NOTE: Includes discharge tube, choke shaft, idle adjustment screws, fuel screen. Fits carburetors w/ 'IH' emblem on float bowl. $39.50 drain petcock, gaskets, fuel strainer & more. Order # Order # Complete carburetor repair kits IHS825 shaft, bowl nut spring, throttle shaft bushings & packing, Carburetor repair kits cont... Radiators, parts Order # IHS249 Price Radiators, parts cont... Description / Application Order # $237.45 IHS2656 Price Radiator Core fits: F12, F14, I12, I14, O12, O14, W12, W14, Replaces: 27065D (H = 19-1/2", W = 17-1/2", D = 2") USA made IHS816 $24.40 Radiator fits: 154, 184, 185 Replaces: 404547R1, R2, R3 NOTE: Copper core. IHS890 $367.95 Mounting Gasket Pair fits: Same as IHS249, Replaces: 23802D USA made IHS255 IHS188 IHS188GK IHS301 $8.95 $210.50 $9.85 $9.95 IHS337 Underside view Mounting Gasket Pair fits: Same as IHS255; Also Fits some F30, W30 Replaces: 10646D USA made IHS239 Gasket (For Radiator Cap) fits: F12 F30, I12 - IK40, Regular, T20 - TD40, W12 - WK40, Replaces: 10429D (6-1/2" O.D., 5-1/4" I.D., 0.575" wide, 0.064" thick) USA made Radiator w/ IHS188GK Gasket (For Pressurized & Non-Pressurized Systems w/ bolt on lower tank) Fits: Cub, Cub LoBoy (1947-up except 154, 184, 185), Replaces: 351878R92, R93, 353903R2 Radiator Cap w/ Gasket Fits: Same as IHS188 Replaces: 351030R91, 400586R1 IHS018 246 $14.00 $365.00 IHS441 IHS449 $386.75 $435.95 $475.95 Radiator Core Bolt Kit fits: Same as IHS188, Replaces: 179817, 280345 (bolt) 103320, 80681 (washer) NOTE: Stainless. Kit includes: 18 bolts & 18 washers. Lower Radiator / Steering Gear Housing fits: Same as IHS188 Replaces: 350886R11 NOTE: For gaskets use IHS1526 & IHS188GK. Includes the steering worm shaft bushing and the steering sector bushing. Both are installed. IHS443 IHS384 $399.95 Radiator (For Non-Pressurized System) fits: A, AV SN: 41330 & up, Super A up to SN: 336710, B, BN SN: 40193 & up Replaces: 58124D NOTE: For cap order IHS337. Radiator Cap w/ Gasket Fits: Same as IHS890 (2.886" O.D., 0.398" tang width, 1.845" inside center dia.) Gasket only (For IHS337) (2.563" O.D., 1.875" I.D., .125" thick) NOTE: NBR rubber. IHS445 Underside view IHS583 Radiator (For Pressurized system) fits: Late Super A SN: 336711 & up, Replaces: 358104R93 (Core dimensions: H = 16-1/8", W = 16", D = 2-1/8") NOTE: Radiator neck on outside. Has 2" dia. on upper & lower hose outlets. For cap order IHS384 or IHS1993. Radiator (For Pressurized system) fits: H & Supers, (I4, O4, OS4, W4 & Super, but NO provisions for light mounts) Replaces: 352628R92 (Core dimensions: H = 18", W = 16-1/4", D = 3-1/8") NOTE: For cap order IHS384 or IHS1993. Radiator (For Pressurized system) fits: M, MTA & Supers, I, O, W6 series Replaces: 357158R92 (Core dimensions: H = 27-1/4", W = 20", D = 4") NOTE: For cap order IHS384 or IHS1993. Underside view STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Radiator Cap w/ Gasket (For (7 PSI) pressurized system) Fits: Same as IHS445, IHS441, IHS449 Replaces: 361705R91, 362323R91 Radiator (For Pressurized system) fits: 100, 130, Super C, 200, 230, Replaces: 356356R96, 358421R93 (Core dimensions: H = 16-1/8", W = 16", D = 2-3/4") NOTE: Has 2-3/8" dia. on upper hose outlet & 2" dia. on lower hose outlet. For cap order IHS723 or ABC008. Radiator fits: 140 SN: 13968 & up Replaces: 369400R94 (H = 16-1/8") NOTE: Will fit early serial numbers by purchasing IHS723 cap. IHS723 $17.50 Underside view IHS442 Radiator Cap (7 PSI) w/ Gasket Fits: Same as IHS583 Replaces: 393229R91, 402281R1, 532029R1 $546.95 Radiator fits: 300, 350 Row-Crop gas, diesel, Replaces: 361704R93 NOTE: Will not fit Utilities. For cap order ABC125. IHS384 $15.50 Order # Price $603.00 Radiator fits: F656 gas, 706 gas, LP, F706 up to SN: 37236 diesel, I706 up to SN: 5273 diesel, 756 gas, LP, Replaces: 378713R92 (Overall dimensions: 26-1/2" x 21-1/4", Core dimensions: 201/2" x 19-3/4" x 3-1/4", Inlet: 2", Outlet: 2") IHS3129 $595.00 Radiator fits: 806, 856, 1026, 1206, 1256, 1456 gas, LP, diesel; 826 gas, LP only, Replaces: 383950R91, 386860R91, 391931R91, 530281R1 (Overall dimensions: 30" x 213/8", Core dimensions: 23" x 183/4" x 3-1/4", Inlet: 2", Outlet: 2") IHS3123 $662.30 Radiator fits: 766 diesel, (886 w/ D360 engine), 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, Hydro 100, Hydro 186 Replaces: 121725C1 (Overall dimensions: 30" x 233/8", Core dimensions: 24" x 22-1/2" x 3-7/8", Inlet: 2", Outlet: 2-1/2") Radiator mounting pads Order # Price IHS536 $2.00 EACH $12.50 IHS821 Underside view IHS989 $6.95 EACH MIS1123 $1.80 EACH Radiator Cap w/ Gasket (For (7 PSI) pressurized system) Fits: Same as IHS442 Radiator Hold Down Spring fits: H, M, W4, W6 & Supers, 300, 350, 400, 424, 450 USA made NOTE: 2 used per tractor; Sold individually. Application Fits: A thru 884, Replaces: 18464D, 47240D (1-1/2" O.D.) NOTE: Sold individually. $14.95 EACH Underside view IHS1993 Description / Application IHS3139 Radiator Cap (For (4 PSI) pressurized system) w/ Gasket & Wing Fits: Same as IHS442 $15.50 Radiator Cap w/ Wing (4 PSI) w/ Gasket fits: Same as IHS445, IHS441, IHS449 Description / Application $579.95 $1.99 Mounting Gasket Fits: Same as IHS188 USA made Underside view IHS951 $9.95 Price $12.50 IHS725 $18.50 EACH ABC455 $2.95 EACH Slotted Hex Nut fits: Same as IHS441, IHS442, IHS449 (7/16"-20 NF, Grade 5) NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fits: 460, 560, 660 Standard, Row-Crop gas, diesel, Replaces: 369932R1 NOTE: 4 used per tractor; Sold individually. Fits: 544, 656, 664, 656, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1586, 4100, 4166, 4186, Industrials Hydros: 70, 86, 100, 186 NOTE: 4 used per tractor; Sold individually. Universal Radiator Mounting Pad Fits: IH / Farmall models (2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually. 247 Cooling parts Cooling parts IHS1953 $29.25 Radiator Core fits: Regular, F20, T20, 10-20, Replaces: 20339D (H = 20-1/2", W = 22", D = 2-7/8") NOTE: Check dimensions before ordering. Order # IHS1993 Radiators, parts cont... IH/Farmall IH/Farmall IHS805 $346.70 Description / Application $325.00 Radiators, parts cont... Radiator caps, gaskets Order # Price IHS1953 $8.95 IHS337 $9.95 Underside view IHS239 Radiator caps, gaskets cont... Description / Application Gasket (For Radiator Cap) fits: F12 - F30, I12 - IK40, Regular, T20 - TD40, W12 WK40, Replaces: 10429D (6-1/2" O.D., 5-1/4" I.D., 0.575" wide, 0.064" thick) USA made Radiator Cap w/ Gasket (For Non-Pressurized System) fits: A, B, C, Super A, Early H, M, I4, I6, I9, O4, O6, (Early T6, T9), W4, W6, W9 Replaces: 43983D (2.886" O.D., 0.398" tang width, 1.845" inside center dia.) NOTE: Fits on inside of neck. IH/Farmall Cooling parts $5.95 Underside view ABC1396 $8.95 Underside view IHS384 $15.50 Underside view 248 Description / Application IHS1993 $12.50 Radiator Cap w/ Gasket (For (7 PSI) pressurized system) fits: B-450; H, Super H (Both w/ low radiator neck); 100, 130, (140 up to SN: 13967), 200, 230, 330, 400, 450, 600, 650; IH Utility: 300, 350; Farmall RowCrop: 300, 350; Wheatland: 400, 450 Replaces: 361705R91, 362323R91 NOTE: Will not fit IHS443. Underside view NOTE: IHS384 & IHS1993 radiator caps will fit IHS441, IHS445, IHS449 radiators. IHS731 $17.50 Underside view IHS723 $9.95 Underside view ABC1398 Price $1.99 Gasket only (For IHS337) (2.563" O.D., 1.875" I.D., .125" thick) NOTE: NBR rubber. IHS301 Order # Radiator Cap w/ Gasket (For Non-Pressurized System) Fits: Cub up to SN: 248124 Replaces: 351030R91, 400586R1 NOTE: Exactly like original. $17.50 Underside view Radiator Cap w/ Gasket (For (7 PSI) Pressurized System) fits: Cub SN: 248125 & up (1975-79); Also fits older Cubs when pressurized system is desired; Will fit 154, 184, 185, but to use original cover must drill 2 holes in wings of cap to mount cap to cover, Replaces: 80889R91, 404548R1, 404684R1 (2.330" O.D., 2.000" tang to tang, 1.096" tall) NOTE: Fits radiators w/ 3/4" tall filler neck. Radiator Cap w/ Gasket (For (7 PSI) Pressurized systems) fits: IH Cub (1975-79) SN: 248125 & up w/ radiator 352903R92; Will also fit older Cubs when a pressurized system is desired; Will not fit 154, 184, 185 Replaces: 365892R91, D61885 (2.330" O.D., 1.500" radiator neck I.D., 2.000" tang to tang) NOTE: Fits 1" tall filler neck. Radiator Cap w/ Wing (For (4 PSI) Pressurized System) fits: Super A, C, Super C, H, Super H, M, MD, Super M, Super MD, I, O, W 4, 6, 9 series, Supers gas, diesel, Replaces: 67448DD, 356710R91, 358105R91 (2.050" radiator neck I.D.) NOTE: Measure radiator neck I.D. before ordering. Fits on outside of neck; Exactly like original; will not fit IHS443 IHS775 $13.50 Underside view IHS925 $10.55 IHS922 $10.65 ABC209 $3.25 Radiator Cap (7 PSI) fits: 100, 130, (140 up to SN: 13967), 200, 230, 240, 330, 340, 460, 560, 600, 650, 660, Replaces: 361705R91, 362323R91, 370871R91 (2.050" radiator neck I.D.) NOTE: Measure radiator neck I.D. before ordering; Exactly like original; does not fit IHS443 Radiator Cap (7 PSI) w/ Gasket fits: 140 SN: 13968 & up, 240, 340, 404, 424, 444, 454, 464, 484, 504, 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 884, 1026, 1206, 1256, 1456; Hydros: 70, 84, 86, Replaces: 393229R91, 402281R1, 532029R1 (1.5" radiator neck I.D.) NOTE: Measure radiator neck I.D. before ordering; Exactly like original. Radiator Cap w/ Cover (For (10 PSI) Pressurized System) fits: 484, 584, 684, 766, 784, 786, 884, H84, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586; Hydros: 100, 186, Replaces: 121951C1, 532672R91, 532673R1, 532674R1, 1500626C92 NOTE: Exactly like original. Winged Radiator Drain Cap fits: A thru 650 gas, diesel, Replaces: 13047DA (3/8" pipe thread) USA made NOTE: Has stamped "IH". Cast iron w/ zinc plating. Winged Water Block Drain Plug fits: A thru 650 gas, diesel; Serviceable for Cub, Cub LoBoy, Replaces: 45314DC (3/8" pipe thread) USA made NOTE: Has stamped "IH" and part number. Cast iron w/ zinc plating. Radiator Drain Plug fits: 404 thru 7488 Replaces: 534184R1 (1/4"-18 NPT) USA made NOTE: See website for full applications. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Radiator pipe / hoses Order # Price IHS684 $29.95 FDS261 IHS3289 $5.10 $23.75 Wittek© tower (hose) clamps - USA made Description / Application Lower Radiator Water Pipe Fits: H & Supers, I, O, W4 series Replaces: 48828D, 353852R1 Radiator Hose (Upper / Lower) Fits: A, AV, (Super A up to SN: 355669), (Late Super A SN: 356601 & up for lower hose), B, BN, Replaces: 20075DB (2-1/4" length, 2" I.D.) NEW! Carburetor to Air Cleaner Hose Fits: IH 300, 350 Utilities (both gas or distillate only), Replaces: 361978R1 NOTE: Does not fit diesel or LP. Radiator Hose Kit fits: H & Supers, I, O, W4 series ((2) - 1-1/2" I.D. x 2-1/2" long, 1-7/8" O.D., (1) - 1-1/4" I.D. x 2-5/16" long, 1-9/16" O.D., (1) - 1-3/4" I.D. x 3-1/2" long, 2-1/8" O.D.) NOTE: For clamps order (2) IHS639, (4) IHS638 & (2) IHS637. IHS130 $16.00 Radiator Hose Kit fits: M, MV, Early Super M w/ 3-1/2" long top hose, W6, MD, Super MD, I6, O6; The following diesel only: MTA, 400, 450, W400, W450 ((1) - 1-1/2" I.D. x 2-1/2" long, 1-7/8" O.D., (2) - 2" I.D. x 2-11/16" long, 2-1/4" O.D., (1) - 2-1/8" I.D. x 4" long, 2-9/16" O.D.) NOTE: For clamps order (2) IHS638, (4) IHS640, & (2) IHS641. FDS261 Price IHS640 $3.80 Replaces: 91406HA (2.175" - 2.500" size range) IHS641 $3.80 (2.400" - 2.625" size range) IHS642 $3.80 Replaces: 45813D (2.350" to 2.765" size range) IHS643 $3.90 (2.685" to 2.995" size range) Thermostats, parts Order # Price Description / Application ABC052 $11.50 Thermostat w/ Gasket fits: Super A, Super C, 100, 130, 140, 200, 230, 240, 330, 340, 404, 504, gas, B250, B275, B414, 424, 444, 354, 374, 384, 3414, 3444 gas, diesel (160º Lo-Temp) USA made NOTE: Gasket is for Ford models only. May also need to order #690798C1 spacer ring (not available from STP). IHS913 $36.50 Thermostat fits: H, M series, MD series & Supers, MTA, I, O, T, W-4, 6, 9 series & Supers, 300, 350 gas, LP only, 400, 450 & W400, W450, 560 diesel, 600, 650 gas, LP, diesel, 656 diesel, 660 diesel, 706 diesel Replaces: 33814DA, 37634DA, 261514R92, 313942R92, 317668R91 (160º Temp) IHS1464 $4.50 $5.10 Thermostat Gasket only fits: H, Super H, O4, OS4, W4, 300, 350, Replaces: 45102D, 45102DA USA made Radiator Hose (Lower) fits: 140, 240, 404, 424 gas, 444 gas, Replaces: 20075DB (2" I.D., 2-1/4" length) IHS251 $13.95 IHS1466 $4.95 Radiator Hose fits: 140, 240, 404, 424 gas, (444 gas using 388458R91 radiator) Replaces: 369397R1 (2.340" I.D. (radiator end), 2.600" I.D. (thermostat housing end)) Thermostat Gasket only fits the following gas, LP, diesel: M, MD, O6 series, W9 series & Supers, 400, 450, 600, 650 Replaces: 45984D, 45984DA USA made ABC1086 $13.50 Wittek tower (hose) clamps USA made © Fits: IH / Farmall models Original Style Order # Price IHS636 $3.50 (.775" - 1.013" size range) IHS637 $3.80 Replaces: 39135H (1.687" - 1.780" size range) IHS638 $3.80 Replaces: 55624D (1.815" - 2.001" size range) IHS639 $3.80 Replaces: 45445D (1.807" - 2.285" size range) Description / Application Thermostat fits the following gas: 460, 560, 656, 660, 686, 706, 756, 806, 826, 856, 3616 Replaces: 108120R91 (180º Temp) USA made Dimension Fan shroud Fits: Cub, Cub LoBoy Replaces: 351037R2 Description Order # Price Fan Shroud............................................................. IHS621..............$84.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 249 Cooling parts $10.45 Order # IH/Farmall IHS184 cont... Fan assemblies Order # IHS143 IHS142 $81.65 $148.50 Fan Assembly fits: Cub up to tractor SN: 165152, Replaces: 131489C1, 251427R91, 251645R91 (3-1/2" pulley O.D.) NOTE: Will also fit Cub LoBoy with purchase of ABC099 generator belt. Has improved sealed bearing. No need to grease! Fan Assembly fits the following w/out water pump: A, AV, B, BN, C & Super A, (F12, F14 but will not look like original) Replaces: 701360R91 (Overall dia. = 15-1/2" tip to tip, Fan pulley dia. = 4", Generator pulley dia. = 3-5/8) NOTE: Has improved sealed bearing. No need to grease! Fan Drive Pulley Assembly fits: Cub, Cub LoBoy tractor SN: 165153 & up using cast iron pulleys w/ sealed bearing & spindle shaft; Fits the following when using a water pump: Some Super A, Super C, 100, 130, 200, 230; Will also fit A, B, C when updated w/ a water pump Replaces: 131486C91 (3.125" c.c fan bolt pattern, 12-24 UNC (fan screws), 4.379" O.D. rear pulley, 4.062" O.D. front pulley) USA made NOTE: Measure fan blade bolt c.c. before ordering. Fan belts Price Application ABC098 $12.30 Fits: Cub, Cub LoBoy w/ C-60 engine Replaces: 251428R1 (11/16" x 30-1/4") ABC101 $12.75 Fits: A, Super A, B & C w/ C-113 engine (All w/out water pumps) Replaces: 46869D (11/16" x 32-1/4) ABC102 $13.50 Fits: A, B, C w/ water pump; Super A1, Super C, 100, 130, 200, 230 w/ C-123 engine, Replaces: 60712D (11/16" x 34-1/4") IHS233 $14.95 Fits: H & Supers, I, O, W4 series, 300, 350 gas, Replaces: 48032DA (11/16" x 37-1/2") IHS134 $17.10 Fits: M & Supers, I, O, T, W6 series gas, diesel, 400, 450, Replaces: 16131DA (13/16" wide x 45-1/4" long) ABC191 $10.30 Fits: 350 diesel & air conditioning belt for some 3488 thru 7488 w/ 42" belt Replaces: 366781R1, 1250587C1 (A.C.) (33/64" x 40-3/4") ABC009 250 $12.95 Price Application $15.50 Fits: F460 gas, LP (fan/gen); F460 diesel (fan); I460 gas, LP (fan); F560 gas, LP, diesel (fan); 606 gas, LP (fan/gen); F656 up to SN: 23107 gas (fan); 706 gas, LP, diesel w/ 46-1/4" belt (gen/water pump); 806 gas, LP (fan), Replaces: 149635R1, 403348R1, 332562R1 (17/32 x 45-1/4") Fits: 424, 444, 2444 (All w/ BD154" diesel engine), Replaces: 237153R1 (5/8" x 36-1/2") Order # IHS898 Price Order # IHS209 (Cover) Price IHS2793 $162.25 Description / Application $37.95 IHS210 (Cover) $5.95 $102.50 Fits: H, Supers, I, O, W4 series, 300, 350 gas IHS209 Replaces: 48461DA IHS209GK Replaces: 45266DA USA made $37.95 $5.95 Fits: M, Supers, I, O, T, W6 series, 400, 450 gas IHS210 Replaces: 46125DA IHS210GK Replaces: 49128DA IHS2789 IHS759 $192.80 $107.08 Water pumps w/ gaskets Order # IHS217 Price Description / Application $122.15 IHS2444 $92.50 Water Pump (NEW not Rebuilt) w/ Pulley fits: A, B, C & Supers, 100, 130, 200, 230, Replaces: 355760R93 IHS189 $293.95 Water Pump (Rebuilt) w/ Fan & Generator Pulley fits: M & Supers, I, O, T, W6 series gas, diesel Replaces: 353729R92 USA made NOTE: Improved sealed bearing. No need to grease. Bolt fan directly to hub. Drive studs not used. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # IHS2573 Price $76.95 Water Pump (NEW not Rebuilt) w/out Pulley fits: 140, 240, 330, 340, 404, 424, 444, 2404, 2424, 2444, T4, T5, 500 gas, LP, Replaces: 367683R91, 375793R92 IHS218 IHS209GK (Gasket) Description / Application $100.95 Water jacket covers, parts IHS210GK (Gasket) NOTE: Verify belt size before ordering. Order # Order # ABC1648 Water pumps w/ gaskets cont... IHS2444GK $4.95 Water Pump (NEW not Rebuilt) Fits: 504, 2504, 3514 w/ C-153 C.I. gas engines, Replaces: 375741R1, 375742R92 NOTE: Does not include backing plate or fan pulley hub. Hub is available by special order if needed. Description / Application Water Pump w/ Hub & Gasket Fits the following diesels: H84, 385, 395, 454, 464, 484, 495, 574, 584, 585, 595, 674, 684, 685, 784, 785, 884, 885XL (All w/ D155, D179, D206, D239, D246, D268 engines), Replaces: 3132677R1, 3136053R93 (4 Bolt fan hub) NOTE: See website for full applications & part numbers. Water pump pulley flanges, parts Order # Price Description / Application IHS033 $29.95 Water Pump Pulley Flange (1/2 Adjustable Nut) fits: (H, HV SN: 57532 & up) & Supers, I, O, W4 series (SN: 1421 & up), 300, 350 gas; Replaces: 6598DX, 362250R11 (5-1/4" dia.) NOTE: 2 different dia. were made, measure before ordering. Will NOT fit early tractors with 5" O.D. pulley (6598D). Water Pump (NEW not Rebuilt) w/ out Pulley fits: 340 diesel; 460 gas, LP, diesel; 504 diesel; 560 gas, LP, diesel; 606 gas, LP, diesel; 656 gas, LP, diesel; 660 gas, LP, diesel; 666 gas; 706 gas, LP, diesel; 756 gas, LP; 766 gas; 806 gas, LP; 826 gas, LP; 856 gas, LP; Hydro 70 gas; Hydro 86 gas; Industrial: 3514 diesel, 3616 gas, diesel; T6-62 series 6 -cyl. gas; TD-6 62 series 6-cyl diesel D282; TD-9 & TD9B 92 series 6-cyl. diesel; H25, 30, 50 diesels; 3800 gas; 3850 gas, Replaces: 601816C92 IHS921 $5.50 Water Pump Pulley Drive Stud fits: H & Supers, I, O, W4 series, 300, 350 gas, Replaces: 48029DA (5/16" thread 1.880" long) USA made NOTE: Silver zinc. 2 used per tractor; Sold individually. IHS034 $29.95 Water Pump (NEW not Rebuilt) w/ O-Ring & Fan Hub fits: 806, 856, 1026, 1206, 1256, 1456 & others using D361 thru DT407 diesel engines Replaces: 701335C92 (1" shaft, replaces original 7/8" shaft) NOTE: See website for full applications. Water Pump Pulley Flange (1/2 Adjustable Nut) fits: F-30, 15-30 SN: TG154508MB & up, W30, W-40, WD-40, T20 SN: FM556 & up, M & Supers, I, O, T, W6 series 400, 450 gas, diesel Replaces: 2370D, 2370DBX (6-1/4" dia; 3.790 I.D.) IHS924 $5.95 Water Pump Pulley Drive Stud Fits: M, MD series & Supers, I, O, T, W6 thru W450, 600, 650 gas, diesel Replaces: 20301D (5/16" thread, 2.571" long) USA made NOTE: Silver zinc. 2 used per tractor; Sold individually. IHS1554 $38.95 Water Pump Packing Gland Nut fits the following gas, LP, diesel: M, Supers, I, O, T, W6, 9, 400, 450, Replaces: 20296D USA made NOTE: Brass. IHS3084 $8.75 NEW! Rear Water Pump Seal fits: M thru 650, Replaces: 20290D, 3108650R91 (1.875" I.D., 2.875" O.D., 0.313" wide) USA made NOTE: See website for full applications. IHS1444 $29.95 Water Pump Pulley Flange (1/2 Adjustable Nut) fits: B250, B275, B276, B414, 238, 274, 354, 364, 384, 424, 434, 444, 2300A, 2424, 3414, 3444, 7000 Forklift, TD5 (All w/ BC-144, BC-144, BD-154 engines), Replaces: 703825R11 (4.975" O.D., 2.900" I.D.) Water Pump (NEW not Rebuilt) w/out Pulley fits: 766, 966, 986, 1066, 1086, 1466, 1486, 1566, 1586, 4166, 4186, 3388, 3488, 3788, 4366, 5088, 5288, 5488, 6388, 6588, 6788, Hydro 186 (All w/ DT414, DT436, DT466 engines) Replaces: 672644C95, 673162C93 Water pump (New, not rebuilt) w/ Adjustable Single Pulley & Gasket Fits: B250, B275, B276, B414, 354, 364, 384, 434, 2300A, 3414 gas diesel; TD5, 238, 274, 424, 444, 2444, 3444 diesel (All w/ BC144, BD144, BD154 engines & w/out alternators) Replaces: 703820R97 Water Pump to Block Mounting Gasket Fits: Same as IHS2444 & more Replaces: 703816R4 USA made NOTE: See website for full applications. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 251 Cooling parts Cooling parts Description / Application Water pumps w/ gaskets cont... IH/Farmall IH/Farmall IHS2081 Price $74.95 Fan belts cont... Glow plug meter Amp gauges w/ stainless steel bezel Fits the following diesels: 340, 460, 504, 560, 606, 656, 660, 706 Replaces: 370380R91, R92, 378352R91, 404740R1 NOTE: Gauges have a glass lens. ABC gauges vary from original appearance. For 2" diameter hole. Works on 6-volt or 12-volt. Order # Price IHS527 $26.95 Description / Application (20-0-20) fits following w/ cut out system: Cub, A, B, H, M, I, O, W-4, 6, 9 series (1939-46), Replaces: 42383DC USA made NOTE: Has IHC logo. IHS418 white letters. Includes the IH logo & part number. ABC gauges vary from original appearance. For 2" diameter hole. When ordering a dash mounted oil pressure gauge you will Price IHS526 $39.95 IHS452 $39.95 $27.95 $24.75 IHS458 $39.95 $12.50 IHS771 $39.95 $12.50 ABC1115 $14.95 $14.95 (60-0-60) fits: A thru 660 w/ Alternator system USA made NOTE: No logo. 252 NOTE: IHS gauges have a metal base, glass lens & black face w/ IHS454 $39.95 Description / Application NOTE: Before 1955 the Oil Gauges were Zone gauges; 1955 & up they were 0-75 gauges. (30-0-30) fits: A, B, C, Cub, H, M, Supers, MTA, Replaces: 360053R91, 378424R91, 393334R1 USA made NOTE: No logo. ABC466 $39.95 Oil pressure gauges w/ stainless steel bezel, parts Order # (20-0-20) fits: A, B, C, Cub, H, M & Supers, MTA USA made NOTE: No logo. ABC109 IHS459 Price IHS626, ABC2353. Charge indicator gauge fits: 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, Hydro 100, Replaces: 533990R1, 1341322C1, 84203117 ABC016 $39.95 the line size to adapt your existing line to the gauge: ABC538, Ammeter (60-0-60) (For tractors converted to a 12-volt system) Fits: IH / Farmall models USA made NOTE: Includes IH logo. IHS787 IHS530 Glow Plug Meter..................................................IHS1538........... $39.95 NOTE: Has IH logo. also need to order (1) of the following fittings depending on (30-0-30) fits following w/ voltage regulator system: Cub, H, M, Supers, Super A, Super C, MTA, 100 thru 660 gas, LP, diesel, Replaces: 360053R91, 378424R91, 393334R1 USA made NOTE: Has IH logo. Correct for mid 1950-up. See website for full applications. Price ABC343 $1.95 (0-75 PSI) fits: A, B, F12, F14, F20, F30 series, Replaces: 43987DB (1/8" NPT male thread) NOTE: Engine mounted. IHC logo is correct thru 1946. (0-75 PSI) fits: H, M, I, O, W series (1939-46), Replaces: 41934DB (1/8" NPT male thread) NOTE: Dash mounted. Has IHC logo. Line adapter sold separately. (0-45 PSI) fits: Early Cub (up to 1954) Replaces: 31041DB (1/8" NPT male thread) NOTE: Engine mounted. Has IH logo. (0-45 PSI) fits: Cub (1955 & up), Cub Loboy, 154, 184, 185, Replaces: 364663R92 (1/8" NPT male thread) NOTE: Engine mounted. Has IH logo. 12-volt Red Jewel Lens Assembly (For 29/32" mounting hole) fits: Some Cub 154 SN: 14536 & up, All 185, (will also fit early 154 by enlarging hole to 29/32") Replaces: 544311R1 (1 Wire lead) NOTE: Used as low oil pressure warning light. 12-volt Light Bulb (For ABC1115) Fits: Some Cub 154 SN: 14536 & up, All 185 (12 amp) NOTE: Used as low oil pressure warning light bulb. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS1666 IHS502 IHS1871 ABC082 $39.95 $39.95 $39.95 Description / Application (0-75 PSI) fits: A, B, C & Supers (1947-54) Replaces: 43987DB (1/8" NPT male thread) NOTE: Engine mounted. Has IH logo. (0-75 PSI) fits: Late Cub, 100, 130, 140, 200 & 230 (1955 & up), Replaces: 364665R91, 393487R91, 528245R91, 536967R1 (1/8" NPT male thread) NOTE: Engine mounted. Has IH logo. (0-75 PSI) fits: H, M & Supers, I, O, W4, 6, 9 series gas; Crawlers: T-6, T-9, T-14 Replaces: 41934DB (1/8" NPT male thread) NOTE: Dash mounted. Has IH logo. Correct for 1947 & up. Price ABC523 $23.95 Oil Gauge Copper Line Kit (For tractors using 1/8" x 6' copper oil line) (6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor) NOTE: Use w/ ABC538 fitting. ABC2353 $3.95 Oil Gauge Adapter Fitting fits: F20, F30, H, M, MD & Supers, MTA, I, O, W4 thru WD9 series, 10-20, 15-30, 22-36 (1/8" pipe female to 1/4" tubing female) ABC538 $13.95 Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/8" compression) USA made NOTE: Brass. Use w/ ABC523 line kit. IHS626 $12.85 Oil Gauge Fitting (For gauges w/out removable fitting), Replaces: 257523R1 (1/8" pipe thread to 1/4" compression) USA made NOTE: Brass. ABC1605 $17.95 Electric Oil Pressure Sensor Switch Fits: 154 thru 6788, Replaces: 3118643R1, 3106558R2, 3129031R91, 376855R92, 392249R92, 529796R1, 530034R2, 65425C1, 91450C1 (0-45 PSI) fits: MD, Super MD, MDV, WD6, Super WD6, WD9, Super WD9, (WDR9 SN: 12426 and up), Super MTA diesel, TD6 & up; Power Units: UD6, UD9, UD14, UD18, UD24, Replaces: 258634R91, 702027C1 (1/8" NPT male thread) NOTE: Dash mounted. Has IH logo. Line adapter sold separately. (0-75 PSI) fits: 240, 300, 330, 340, 350, 400, 450, 600, 650 gas, LP, Replaces: 362039R91; Serviceable for 536962R2 (1/8" NPT male thread) NOTE: Dash mounted. Has IH logo. Line adapter sold separately. (0-45 PSI) fits the following diesels: 350, 400, 450, 600, 650; Gas, LP, diesel: 460, 560, 660; Gas, diesel: 3616, 3800, 3850 Replaces: 362177R94, 393488R91 (1/8" NPT male thread) NOTE: Dash mounted. Has IH logo. Line adapter sold separately. $19.90 (50 PSI) fits: MD thru WD9, 350 diesel thru 660 (1/8" NPT male thread) NOTE: Dash mounted. No logo. Line adapter sold separately. ABC005 Order # Touch control gauge Fits: Super A, Super AV, C, Super C, 100, 130, 140, 200, Replaces: 355840R91, 355841R91, 356465R91, 356466R91 Description Order # Price Touch Control Temperature Gauge..................IHS525.............. $72.00 w/ Right Angle 45" Lead NOTE: If not previously equipped w/ touch control gauge, customer must also purchase #355844R91 strainer assembly from IH or salvage yard as it is tapped for gauge capillary line. Water temperature gauges w/ stainless steel bezel, part NOTE: IHS gauges have a metal base, glass lens & black face w/ white letters. Includes the IH logo & part number. ABC gauges vary from original appearance. Dash mounted gauged are for 2" diameter hole. Order # IHS589 $19.90 Description / Application Gauges Gauges IHS1837 $26.95 (20-0-20) fits following w/ cut out system: A, B, C, Cub, H, M, I, O, T, W-4, 6, 9 series (1947-50), Replaces: 354473R91 USA made NOTE: Has IH logo. Also fits most Cub Cadets. Order # Order # Oil pressure gauges w/ stainless steel bezel, parts cont... (80 PSI) fits: H thru 660 (1/8" NPT male thread) NOTE: Dash mounted. No logo. Line adapter sold separately. Price Description / Application $64.95 Water Temperature Gauge fits: A, B, BN Replaces: 53619DC (19 1/4" long from rear of gauge to end of probe) NOTE: Has IHC logo. Water temperature gauges continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com IH/Farmall IH/Farmall IHS395 $26.95 Description Oil pressure gauges w/ stainless steel bezel, parts cont... 253 Water temperature gauges w/ stainless steel bezel, part cont... Fuel sending units, gasket NOTE: IHS gauges have a metal base, glass lens & black face w/ IHS1717 white letters. Includes the IH logo & part number. ABC gauges Order # Price IHS3173 $64.95 IHS934 Description / Application NEW! Water Temperature Gauge Fits: Super A, Super AV, Super A-1, Super AV-1; Serviceable for 100, 130 Replaces: 53619DB, 53619DC (19-1/4" long from rear of gauge to end of probe) NOTE: Has IH logo. $49.95 IH/Farmall Gauges Water Temperature Gauge fits: H, M & Supers, I, O, W4, 6, 9 series gas, diesel (1947-54), Late TD-6, 100, 130, 140 Replaces: 67135D (16" lead) NOTE: Has IH logo. $3.85 ABC3261 $3.85 Order # IHS532 Water Temperature Gauge fits: C, Super C, 200, 230, 240, 300, 330, 340 gas only, T340, (350, 400, 450, 460, 560 & 660 gas, diesel) Replaces: 353868R91, 369849R91, 393476R91, 393481R91, 536960R2 (72" lead) NOTE: Has IH logo. IHS903 Price $39.95 $39.95 $27.25 IHS791 $29.95 Water Temperature Gauge fits: C thru 650 (60" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash mounted; No logo. 254 Order # ABC1822 $8.95 IHS940 $57.00 Fuel Sending Unit fits: 560, 660 (both w/ Stewart Warner fuel gauge only); F544 gas, F656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros: 70, 86, 100, Row-Crops only Replaces: 378427R91 (32 OHM full to 244 OHM empty, 16-1/4" deep) NEW! Fuel Sending Unit Gasket Fits: 240 thru 1568, Replaces: 369154R1 (2.850" "O.D., 1.715" I.D., 0.091" thick, (5) 1/4" screw holes) USA made IHS1536 $148.95 IHS797 $148.95 NEW! Fuel Sending Unit Gasket Fits: IH 354 thru 884, 786 thru 7488 Replaces: 528359R94 (2.850" O.D., 1.715" I.D., 0.132" thick, (5) 1/4" screw holes) USA made Fuel gauges Water Temperature Gauge fits: C thru 660 (110º - 230º temperature range, 90º pointer sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe bushing) NOTE: Dash mounted; No logo. ABC1593 Description / Application Cluster Gauge Assembly w/ Round Threaded Terminals (Fuel & Temperature) Fits: 544, 656, (666, 686 diesel only), 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456, 4166, 4186, Hydros: 70, 86; Serviceable for 404, 424, 444, 504, 606, 3414 gas - Will have a longer capillary line Replaces: 376854R93, 380397R93, 382733R93, 396380R91, 397939R92, 539293R1, 1546480C1 NOTE: For light bulbs use ABC343. 12-volt Negative Ground Fuel Gauge (Rochester Style) fits the following w/ factory Rochester gauge: 340 diesel, 460 gas, diesel, 560 gas, diesel, 660 gas, diesel Replaces: 369607R91 (0 - 70 OHMs) NOTE: This aftermarket fuel gauge replaces the factory Rochester gauge. Has IH logo. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $124.95 IHS1500 $174.95 Air cleaner change gauge IHS753 $77.95 Order # Price IHS847 $46.80 Tachometer Drive Gear Assembly Fits: Cub, 130, 140, 230, 240, 300, 330, (340 gas only), (350 gas, LP only), 400, 404, (424, 444 both gas only), 450, (504 gas, LP only), 600, 650 for IH distributor systems only w/ tach drive housing # 369692R1, Replaces: 369695R91 NOTE: Nylon gear w/ metal shaft. Will also need to order connector housing IHS2697 & IHS3119 clip for 300 thru 650 if replacing ALL NYLON gear/shaft drive. IHS2697 $47.50 Tachometer Cable Connector Housing Fits: Same as IHS1905 Replaces: 369692R1 NOTE: For use with Nylon gear w/ metal shaft. Will need to order tach drive gear IHS1905 & IHS3119 clip for 300 thru 650 if replacing ALL NYLON gear/shaft drive. Description / Application $99.95 Tachometer fits: I-300 Utility, I-350 Utility gas (both w/ Live PTO & torque amplifier), Replaces: 363829R91 ABC476 Tachometer Mounting Bracket Fits: F300, F350, 400, 450, W400, W450 gas, LP, diesel, Replaces: 364376R1 IHS1905 Tachometers, parts Price Tachometer fits: Correct for 400, 450, W400, W450 (gas, LP only); Serviceable for F300, F350 gas, LP, diesel Replaces: 364393R91 NOTE: Serviceable: the RPM will read right, the PTO & ground speed is in a different location. Tachometer fits: 424, 444, 2424, 2444 gas Replaces: 388893R91 NOTE: Clockwise rotation. Air Cleaner Change Indicator / Gauge................ IHS789..........$34.75 Order # 2-Piece Tachometer Drive Gasket Kit Fits: 350 diesel, Replaces: 368118R1, 817220 USA made Tachometer fits the following diesels: 400, 450, W400, W450 Replaces: 364395R91 $39.95 $39.95 Fuel Gauge fits: 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, Hydro 100; Calibrated correctly for 460, 560, 660 w/ Stewart Warner sender but has a different appearance, Replaces: 533992R1, H142794; Will work for 378426R91 IHS849 IHS853 Description Description / Application Tachometer fits: 340 gas Replaces: 371243R92 Cluster Gauge Assembly (Oil & Temperature) fits: 766, 966, 1066, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, Hydro 100 (All diesel) NOTE: For light bulbs use ABC343. Fits: 656, 664, 666, 686, 706, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4366, 4386, 4568, 4586, Replaces: 389871R91, 397942R91, 533991R1, 536230R1, 1341364C1 Description / Application Fuel Pressure Gauge (80 PSI) (Screw-In Type) fits: MD, MDV, Super MD, MTDA, ID, TD, TD14, TD14A, OD & WD 6 - 9 series; 400, 450, 600, 650 (All diesel) Replaces: 260390R94, 263791R92 NOTE: Gauge has a metal base, glass lens & black face w/ white letters. Includes the IH logo & part number. Cluster Gauge Assembly w/ Spade Terminals (Fuel & Temperature) Fits: 706, 806, 1206, 2706, 2806, 21206 Replaces: 382732R91, R92, R93, R94; 396380R91, R92, R93 NOTE: Must use our adapter bushing for installation of the temperature gauge. For light bulbs use ABC343. Price $48.00 Tachometer Drive Assembly w/ Gaskets Fits: 350 Row Crop diesel Replaces: 367150R91 NOTE: Driven off the generator. 14 & 43 tooth gears. Tachometer, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 255 Gauges ABC239 $49.95 Price IH/Farmall IHS531 ABC3256 $49.95 Water Temperature Gauge fits: H, M, I, O, (W series 4-9 gas, diesel), T6 (1939-46) Replaces: 63783D (16" lead) NOTE: Has IHC logo. IHS453 $49.95 $19.95 Water Temperature Bracket fits: A, AV, Super A, Super AV, Super A1, Super AV1, B, BN, 100, 130, Replaces: 50495D, 53620D USA made IHS528 IHS886 Tachometers, parts cont... $149.95 Fuel Sending Unit fits: 444, 460, 560, 660, 2444 All w/ Rochester fuel gauge Replaces: 370376R92 (0 - 70 OHMS) 2" diameter hole. Price Order # IHS795 $48.50 vary from original appearance. Dash mounted gauged are for Order # Description / Application Cluster gauges Tachometers, parts cont... Order # IHS3119 IHS3121 Order # IHS175W $99.00 Tachometer w/ White Face fits: 756, 766 gas up to SN: 10934, 826, 856, 1256, 1456, 2756, 2856, 21256, 21456 Replaces: 66748C1, 388589R91, 397945R91, 398095R91 NOTE: For light bulbs use ABC343. IHS765 $149.95 Tachometer w/ Knob fits: 766 diesel, Early 786, Early 886, 966 w/ Gear Drive, 986, 1066 w/ Gear Drive, 1086, 1466 w/ Gear Drive, Early 1486 Replaces: 67679C2, 103151A1, 107368C3, 84212503 NOTE: For light bulbs use ABC343. Distributor Drive Housing (USED, not New) w/ Opening for Tachometer Drive Fits: Cub thru 650 equipped w/ tachometer drive; Will also fit Letter series w/out drive by ordering # IHS3125 block off plate Replaces: 363749R91, 363763R11 USA made NOTE: Use w/ IHS1716 distributor when replacing a magneto. Tachometer drive, housing, or block off plate sold separately. $7.95 Tachometer Connection Housing Plate w/ Gasket fits: Cub thru 650 (Same as IHS1905), Replaces: 363817R1 (plate), 363814R2 (gasket) USA made IHS176 $65.00 Tachometer fits: 454, 464, 484, 485, Hydro 574, 584, 674, 684, 784, 785, 884, 885, H84, 2400, (Hydro 2500A SN: 100001 & up) gas, diesel, Replaces: 3121926R91, 3125106R92, 66455C1 NOTE: Clockwise rotation. IHS909 IHS175B 256 Description / Application Tachometer Cable w/ Metal Sheath Fits: Farmalls 300, 350, 460 (All RowCrops) gas, diesel, Replaces: 364375R91 (61-1/4" long with square ends) FDS423 IHS256 $16.50 Tachometer Cable w/ Metal Sheath Fits: 240, I-300, 330, 340, 504 gas, (I-350 gas, diesel); 404, 424, 444, 2424 & 2444 gas, Replaces: 150938R91, 363811R92 (48" long, Square ends) NOTE: Limited supply, replacing w/ nylon sheath. $148.50 $224.95 $99.00 Tachometer fits: 544, 656 Row-Crop w/ Gear Drive & w/ T.A. gas, diesel Replaces: 103153A1, 389973R91, 401841R91 NOTE: Has single light hole in rear. For light bulbs use ABC343. Tachometer fits the following w/ Hydro transmission: 544, 656, 666, 826, 966, 1026, 1066; Hydros: 70, 86, 100 Replaces: 398957R1, 402033R1, 534055R1, 65324C1 NOTE: For light bulbs use ABC343. Tachometer w/ Black Face Fits: 706, 806, 1206; Industrials: 2706, 2806, 21206, Replaces: 66748C1, 388588R91, 388589R91 NOTE: For light bulbs use ABC343. IHS248 IHS1840 Price $24.95 IHS1289 (Nylon sheath) $34.95 $28.95 $29.95 Speedometer Drive Cable w/ Nylon Sheath Fits the following Hydros: 70, 86, 544, 656, 666 gas, LP, diesel, Also fits as a tachometer cable for 354, 364, 434, 3414 gas, Replaces: 398955R93, 3068984R92 (45-1/8" long) NOTE: Has small fittings on both ends. Tachometer Cable w/ Metal Sheath Fits: I544 diesel, 560, 660 gas, diesel, 886 w/ D360 engine, 986, 1086, 1468, 1486, 1568, 3688, 3688 HC Replaces: 371245R91, 401830R92 (63" long) Tachometer/Speedometer Drive Cable w/ Nylon Sheath fits as a tachometer cable for the following: Cub, I340 gas, TD340, (I460 gas, LP, diesel), I504 gas, F504 diesel, (606 gas, LP, diesel). Fits as a speedometer drive cable for the following Hydros: 100, 826, 966, 1026 Replaces: 370197R91, 397016R92 (43" long) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application IHS1255 (Metal sheath) $30.95 IHS1788 $27.50 IHS2341 Price Price IHS792 $76.50 IHS1261 (LH) $78.00 Tachometer Cable w/ Nylon Sheath OR Metal Sheath fits: 600, 650, (666 w/ D-310 engine), 766, 806, 856, 1026, 1206, 1256, 1456, 3088, 3288, 4166, 4186, 4366 (diesels only), Replaces: 384845R92, 385082C91, 387916R91, 393328R93 (80" long) IHS1264 (RH) Tachometer Cable w/ Nylon Sheath Fits the following diesels: 706 w/ D310 engine, 756, 826, 966, 1066, 1466, 1566, Hydro 100 (diesels only) Replaces: 396386R93 (87" long) Instrument panel housings Order # Order # Tachometer/Speedometer Cable w/ Nylon Sheath fits the following IH Utilities w/out cabs up to 1985: 484 thru 885; Fits following Row-Crops (gas unless noted) F544, F656, 666, 686, (706 gas, D282 diesel), 756, 766, 806, 826, 856, 3514 w/ C175 gas; Also as a speedometer for Hydros: 454, 464, 574 Replaces: 393326R92, 529234R1 (58-3/8" inner cable length) $24.95 $42.50 Tachometer Cable w/ Metal Sheath Fits: Farmalls 400, 450 gas, diesel Replaces: 364396R91 (66-3/8" long) IHS1834 Order # IHS1951 $28.50 $99.00 Tachometer fits: 460, 560 gas, diesel Replaces: 383092R91, 383093R91 IHS907 IHS697 Price Instrument panel housings cont... Description / Application Electrical outlet socket, parts Order # Price ABC395 $25.75 LH Lower Dash Side Support Panel Fits: 154 SN: 22332 & up; 185 Replaces: 404829R2 USA made IHS2320 ABC1868 $21.10 Auxiliary Male 2-Pin Connector Plug (For ABC395), Replaces: 364559R91 (3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins, wires must be soldered or crimped. ABC2285 $4.95 Electrical Outlet Socket Boot Fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. $34.50 RH Lower Dash Side Support Panel Fits: 154, 185 (RH side only); 184 (RH & LH), Replaces: 404830R2 USA made IHS2439 Description / Application Electrical Outlet Socket (For Implements w/ Lights) Serviceable for IH / Farmall models NOTE: 2 plated brass pins. $34.50 $34.50 Instrument Panel Housing fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100 Replaces: 531038R1 NOTE: Cast aluminum. Instrument Panel Side Housing Fits following w/out cabs: 385, 395, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885 (All thru 1985); 595, 695, 895 Also fits the following if notched: 4210, 4230, 4240 $78.00 IHS1261 Replaces: 3121637R1, R3 IHS1264 Replaces: 3121638R1, R3 USA made NOTE: Parts are coated w/ a wax release agent. You must wet sand with fine sand paper before painting. LH Lower Dash Side Support Panel Fits: 154 up to SN: 18708 Replaces: 404829R1 USA made IHS2324 Description / Application $82.00 Fiberglass Dash Cowling (Rear Hood) Fits: 154, 184, 185, Replaces: 404585R2 NOTE: Primer only. Wet sand w/ fine paper prior to painting. Battery cable clip Fits: All Cubs Replaces: 351929R1, 363504R1 USA made Description Order # Price Battery Cable Hold Down Clip.........................IHS496..............$10.85 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 257 Gauges/Electrical parts IHS768 Gauges $58.50 Description / Application Tachometer Cable Connector Housing Retainer Clip (Thrust Stop) fits: Cub thru 650, (Same as IHS1905) Replaces: 369693R1 USA made NOTE: For use with Nylon gear w/ metal shaft. Will need to order tach drive gear IHS1905 & IHS2697 connector housing for 300 thru 650 if replacing ALL NYLON gear/shaft drive. Tachometers, parts cont... IH/Farmall IH/Farmall IHS3112 Price $2.50 Tachometers, parts cont... Battery cables - USA made Battery boxes, parts cont... Heavy Duty; Straight terminals Order # unless otherwised noted IHS1608 EO = Eyelet Opening Price $78.00 L = Length Order # Price Applications / Specifications Ground Cables (Non-Insulated) ABC401 $13.90 (2 Gauge, EO = 7/16", L = 6") ABC411 $15.80 (2 Gauge, EO = 7/16", L = 9") ABC405 $17.95 (2 Gauge, EO = 1/2", L = 13") ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14") ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19") ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24") IHS225B $16.99 (2 Gauge, EO = 3/8", L = 10-1/2") ABC415 $18.40 (2 Gauge, EO = 3/8", L = 12") ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2", 90º terminal ends) ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH ENDS, L = 16-1/4") ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21") ABC419 $19.95 (2 Gauge, EO = 3/8", L = 27") IHS2936 $57.65 Fits: Farmall Cub up to SN: 224400, Cub LoBoy up to SN: 18700 Replaces: 351956R91 (2 Gauge, L = Appx. 87") NOTE: Black PVC covering, soldered & heat sealed ends. IHS082 $96.00 IHS080 IHS080L $99.95 Battery Box Lid w/ Retainers & rubber bushings fits: Same as IHS082 Replaces: 350637R92 NOTE: Restoration quality. Description / Application Battery Box w/ Lid & Hardware Fits: Cub, Cub LoBoy Replaces: 538609R2 (box), 351336R12 (lid) (Inside: 7-3/16" wide, 8-1/2" tall, 9-1/4" long) NOTE: Powder coat red. Restoration quality. IHS520 (Top, LH, RH & Front covers) Fits: Super A SN: 348644 & up, Super C SN: 176523 & up, 100, 130, 140, 200, 230 Replaces: 350637R92, 358540R11, 358541R11, 358542R11 NOTE: Powder coat red. Can replace IHS082 for easier battery access. Restoration quality. $29.95 IHS516 $19.20 $7.50 Lid only w/ Retainers & Rubber Bushings fits: Same as IHS520 Replaces: 350637R92 NOTE: Powder coat red. IHS691 Hardware only fits: Same as IHS080 258 IHS517 IHS518 IHS519 $21.00 $3.95 T-Bolt fits: A, B, C & Supers, 100, 130, 140, 200, 230 (All using OEM Battery boxes w/ lids), Replaces: 50939DX NOTE: Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Battery Box Side Cover w/ Clips & T-Bolt fits: Same as IHS520 IHS517 Replaces: 358540R11 IHS518 Replaces: 358541R11 NOTE: Powder coat red. Battery Box Front Cover fits: Same as IHS520, Replaces: 358542R11 NOTE: Powder coat red. IHS081 IHS081L IHS920 IHS079AH $88.50 $38.95 $5.30 $119.95 IHS2427 $4.95 $38.95 Front only fits: Same as IHS080 IHS080H $49.95 $154.30 4-Piece Battery Box Assembly Lid only w/ Retainers & Rubber Bushings fits: Same as IHS080 IHS080F Battery Box w/ Lid fits: C, (Super A up to SN: 348643), Super C up to SN: 176522, Replaces: 358544R91, 350634R91 (Inside: 7-1/8" wide, 8-3/4" tall, 9" long; bolts down w/ 4 bolts) NOTE: Powder coat red. Restoration quality. $38.95 Battery boxes, parts Price IHS518 (RH) $38.95 Lid only w/ Retainers & Rubber Bushings fits: Same as IHS225B IHS516 Order # Battery Box w/ IHS225LR Lid fits: A, B, BN, Replaces: 50943D (box), 50943DX (box w/ lid) (Inside: 7-1/8" wide, 9" tall, 9" long) USA made NOTE: Powder coat red. Restoration quality. Price $49.95 IHS084 $98.75 Battery Box w/ Lid fits: H, Super H up to SN: 19233, O, W4 series Replaces: 51680DB (Inside: 7-1/4" wide, 8-3/4" tall, 9" long) NOTE: Powder coat red. Restoration quality. Lid only w/ Retainers & Rubber Bushings fits: Same as IHS081 NOTE: Mounts under gas tank. Battery Box Support Lock Bolt Fits: Same as IHS081, Replaces: 52898D (7/16" x 20 NF, 1.220" o/a length) USA made NOTE: Bolt NOT included w/ box. 2 used per tractor; Sold individually. Battery Box w/out Imprint fits: Super H SN: 19234 & up, Replaces: 359500R91 (7-5/8" wide, 9-1/2" tall, 14-7/8" long) NOTE: Mounts under seat. Powder coat red. Restoration quality. Battery Lid Eye Bolt & Wing Nut Fits: H, HV, (Super H up to SN: 19233), M, MD, MV, (Super M up to SN: 28174), OS4, W4, Super W4, W6 gas, WD6 Replaces: 51684DX NOTE: 2 used per tractor; Sold individually. Battery Box w/ Lid fits: M, MD, (Super M up to SN: 28174), (All under tank) IHS084L only fits: W9, SW-6, WD-9, WR-9, WDR-9; 600, 650 diesel only Replaces: 51712D (Inside: 7-3/16" wide, 9-1/8" tall, 11-3/4" long) NOTE: Battery box mounts under gas tank. Powder coat red. Restoration quality. Order # Price Description / Application IHS3146 $118.50 IHS084L $38.95 IHS802 $4.95 Battery Box Support Lock Bolt Fits: Same as IHS084 Replaces: 51712D NOTE: Bolt NOT included w/ box. 2 used per tractor; Sold individually. IHS079AM $119.95 Battery Box w/out Imprint fits: Super M SN: 28175 & up gas, diesel, Super MTA series, Replaces: 358693R91 (7-5/8" wide, 9-1/2" tall, 14-7/8" long) USA made NOTE: Mounts under seat. Powder coat red. Restoration quality IHS079B $119.95 Battery Box w/ Imprint on End Fits: F350, 450; Will fit F300, F400, but rear light on opposite side Replaces: 362059R92 (8" wide, 9-1/2" tall, 15" long) NOTE: Mounts under seat. Rear light mounts to LEFT side of box. Powder coat red. Restoration quality IHS862 $89.95 Battery Lid w/ Hold Down fits: 300, 330, 350 Utilities gas (All w/ manual steering), Replaces: 362489R93, 358277R2 NOTE: Must be trimmed for power steering tractors ABC365 $4.25 Rubber Bushing (For Battery Box Lid) Fits: Cub thru 650, Replaces: 51690D (.735" tall) NOTE: See website for applications. ABC363 $5.00 Rubber Bushing (For Battery Box Lid) Fits: Cub thru 650, Replaces: 51689D (1.060" tall) NOTE: See website for applications. ABC364 $3.75 Rubber Bushing Retainer (For Battery Box Lid) fits: Cub thru 650 Replaces: 50942D NOTE: See website for applications. IHS721 $8.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Battery Box w/ Lid fits: I6, O6, OS6, W6, (Super W6 up to SN: 9084), W9, WR9, Super WD9, Super WDR9, (600, 650 diesels), Replaces: 60700D (Inside dimensions: 7-3/16" wide, 9-1/8" tall, 11-3/4" long) Lid only w/ Retainers & Rubber Bushings fits: Same as IHS084 & IHS3146, Replaces: 51707D, 51713DXA, 51713DXB J-Bolt, Pair fits: IH/Farmall models Replaces: 393161R1, 198185A1 (5/16"-18" UNC x 10-3/4") Battery boxes, parts continue on next page 259 Electrical parts Electrical parts IHS225LR ABC407 Fiberglass Battery Cover fits: 154, 184, 185, Replaces: 404575R2 NOTE: Wet sand with fine sand paper prior to painting Order # IHS517 (LH) Battery boxes, parts cont... IH/Farmall IH/Farmall Insulated Battery Cables $128.50 Description / Application Battery boxes, parts cont... Battery boxes, parts cont... Order # IHS911 IHS1276 684, 685, 784, 785, 884, 885 (All thru 1985); 395, 495, 595, 695 Replaces: 1536764C1, 3121393R91 (15-5/8" wide x 18-5/16" long) USA made NOTE: Fiberglass like original. Parts are gel coated w/ a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. Does not include the mounting screws. $104.50 Battery Door fits: 454, 464, 574, 674; Industrial: 2400, 2500 Replaces: 401933R1, 3113425R1 (20-5/16" long, 15-3/8" wide) USA made NOTE: Fiberglass like original. Parts are gel coated w/ a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. Does NOT include IHS1557 mounting screws. IHS859 IHS230 260 Electrical parts $85.65 $11.30 $84.80 $27.75 Price $8.95 IHS868 (LH) $65.30 IHS870 (RH) $65.30 IHS868 IHS870 IHS864 (LH) $65.30 IHS866 (RH) $65.30 IHS864 Battery Cover fits: 544, 656; Serviceable for 666, 686, Hydro 70, Hydro 86 gas, diesel (All w/ battery mounted under the dash), Replaces: 388219R1, 538585R1 USA made NOTE: Primed metal. For serviceable models must trim cover (too tall) to fit. Battery Cover fits: IH 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 Replaces: 71711C91 Battery Tray fits: IH 706, 756, 766, 806, (826 w/ gear drive), 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 IHS868 Replaces: 399046R1, Will work for 399048R1 IHS870 Replaces: 399047R1, Will work for 399055R1 USA made NOTE: Will NOT fit Hydro's; Use IHS870 w/ heavy duty battery (5" wide) group 4EH. Order # IHS891 IHS3273 IHS2664 Battery Tray fits: IH 706, 756, 766, 806, (826 w/ gear drive), 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 IHS864 Replaces: 380409R91, 403529R1 IHS866 Replaces: 384491R91, 403530R1 USA made NOTE: Will NOT fit HYDRO'S; Use IHS866 w/ light duty battery (4-1/4" wide) group 3EH. Restoration quality wiring harness kits for generators USA made light wires and diagram. Cloth covered like Order # IHS893 IHS895 Price Description / Application STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS2629 $35.85 IHS483 $198.00 Wiring Harness Kit (For 6-volt systems IHS908 $189.95 Wiring Harness Kit (For 6-volt systems IHS485 $184.65 Wiring Harness Kit (For 6-volt systems IHS486 $198.50 Wiring Harness Kit (For 6-volt systems only) fits: Super H up to SN: 19233 w/ battery under tank & 4 terminal regulator $99.95 Main Engine & Dash Wiring Harness Fits: 154, 185, Replaces: 404847R2 NOTE: Does not include lights, PTO or rear harness. Use w/ 6 or 8 socket plug. 12-piece Wiring Harness Wire Clip Set Fits: H, HV, (Super H & Super HV up to SN: 19233) NOTE: Zinc plated w/ rubber coated ends. Includes instruction sheet. Does not include battery cable clips. See website for replacement numbers. only) fits: Super H SN: 19234 & up w/ battery under seat & 4 terminal regulator only) fits: M up to SN: 229910 w/ 3 terminal cut-out on the generator only) fits: M when converted to 4 terminal regulator on generator only) fits: Farmall M SN: 229911 & up, Super M up to SN: F28174 & up to SN: L504801 gas w/ battery & 4 terminal regulator under fuel tank $198.50 Wiring Harness Kit (For 6-volt systems IHS482 $159.95 Wiring Harness Kit (For 6-volt systems IHS2635 $35.85 IHS971 $163.35 Wiring Harness Kit (For 6-volt systems IHS2871 $214.00 Wiring Harness Kit (For 6-volt generator IHS3286 $234.00 NEW! Wiring Harness Kit (For 12-volt IHS2896 $214.00 Wiring Harness Kit (For 6-volt generator IHS2274 $249.75 Wiring Harness Kit (For generator IHS2877 $249.75 Wiring Harness Kit (For generator & IHS904 IHS906 only) Fits: A, Super A up to SN: 345198, B, BN (All w/ 3 terminal cut-out relay) only) fits: A, A1 when equipped w/ 4 terminal regulator, Super A SN: 345199 & up, B, BN (All w/ 4 terminal regulator) NOTE: Will fit A, early Super A, B, BN if converted to regulator. only) fits: C, Super C (All w/ 3 terminal cut-out relay) NOTE: Will not fit tractors w/ fast hitch. Rear light wire will be shorter. only) fits: C, Super C (All w/ 4 terminal regulator) NOTE: Will not fit tractors w/ fast hitch, Rear light wire will be shorter. $189.95 Wiring Harness Kit (For 6-volt systems only) fits: H up to SN: 340953 w/ 3 terminal cut-out on top of generator $199.95 Wiring Harness Kit (For 6-volt systems only) fits: H SN: 340954 & up w/ 4 terminal regulator under fuel tank IHS480 $189.95 Wiring Harness Kit (For 6-volt systems IHS3279 $212.50 NEW! Wiring Harness Kit (For 6-volt $166.75 Wiring Harness Kit (For 6-volt systems only) fits: Cub SN: 115403 - 165152 w/ 4 terminal voltage regulator Replaces: 354252R91 NOTE: 7 main harness wires + 6 separate wires = 13 wires. $189.95 Wiring Harness Kit (For 6-volt systems IHS487 $149.95 Wiring Harness Kit (For 6-volt systems only) fits: Cub SN: 501 - 115402 w/ 3 terminal cut-out relay Replaces: 351325R91 NOTE: 5 main harness wires + 6 separate wires = 11 wires. IHS488 $228.50 NEW! Wiring Harness Kit (For 6-volt systems only) fits: Farmall Cub SN: 210001 - 224400; IH Cub LoBoy SN: 10001 - 18700 (Both w/ 4 terminal voltage regulator) Replaces: 371032R91, 371033R91 Description / Application $176.65 Wiring Harness Kit (For 6-volt systems one side & one terminal on the other side or bottom. See page 344B for a further explanation. only) fits: Cub SN: 165153 - 210000 w/ 4 terminal voltage regulator, Replaces: 363507R91; Cub LoBoy up to SN: 10000 NOTE: Has 2 wires leading to headlights. 8 main harness wires + 7 separate wires = 15 wires. Price IHS484 are on page 262. terminal on the other side. Regulator has three terminals on $178.95 Wiring Harness Kit (For 6-volt systems Order # $163.35 Wiring Harness Kit (For 6-volt systems original. Alternator conversion harnesses NOTE: Cut-out relay has two terminals on one side & one Description / Application IHS481 NOTE: For tractors w/ GENERATORS, not alternators. Wiring harness kits include Price NOTE: IHS895 & IHS891 will interchange. The only difference is IHS891 has 2 separate wires for headlights & the IHS895 has a single wire to the headlights. IHS866 Metal Battery Door fits: 454, 464, 574, 674; Industrials: 2400, 2500 Replaces: 401933R, 3113425R1 (20-3/8" long, 15-3/8" wide) USA made NOTE: New & improved steel replaces the fiberglass door. Slotted Thumb Screw w/ Retainer Fits: 354, 364, 384, 385, 454, 464, 484, 574, 584, 664, 674, 684, 784, 884, Hydro 84, 2300A, 2400A, 2500A Replaces: 376787R1 (retainer); 3112170R11, 377521R1,3, 389872R1 (screw) (5/16"-18 NC x 3/4", 1.100" o/a length, .775" dia. head) USA made NOTE: Retains battery door. 2 used per tractor; Sold individually. Description / Application J-Bolt, Pair fits: IH 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 Replaces: 393161R1, 198185A1 (5/16"-18" UNC x 10-3/4") Restoration quality wiring harness kits for generators - USA made cont... IHS3283 only) fits: H when converted to 4 terminal regulator on generator systems only) Fits: I4, O4, W4 (All w/ 3 terminal cut-out relay), Replaces: 57350DA, 32054DX, 31522DX, 31552DX $214.00 NEW! Wiring Harness Kit (For 6-volt systems only) Fits: I4, O4, W4 (All w/ 4 terminal voltage regulator) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com only) fits: Farmall Super M, MTA SN: F28175 & up & SN: L504802 & up w/ battery under the seat & 4 terminal regulator NOTE: Wires will be too short for the Early Super M. 12-piece Wiring Harness Wire Clip Set Fits: M, MV, (Super M & Super MV up to SN: F28174 & up to SN: L504801) gas, LP NOTE: Zinc plated w/ rubber coated ends. Includes instruction sheet. Does not include battery cable clips. See website for replacement numbers. & regulator systems) fits: 100, 130 Replaces: 358109R92, 363476R91, 363483R91 generator systems) fits: 140 SN: 26801 45000, Replaces: 387315R91, 387318R91, 404354R1 & regulator systems) fits: 200, 230 w/out fast hitch, Replaces: 354243R92, 366461R91 NOTE: Fast hitch harness is available by special order, call for quote. systems only) fits: 300 Row-Crop regulator systems) fits: 350 Row-Crop gas, LP, Replaces: 362011R91, 366314R91, 366459R91 Wiring harness kits for generators continue on next page 261 Electrical parts IHS1557 Order # IHS721 Restoration quality wiring harness kits for generators - USA made cont... IH/Farmall IHS778 Description / Application Battery Box Cable Grommet fits: Cub, Cub LoBoy, A, B, H, M, Super H, Super M, MTA, O, W series, (300, 350, 400, 450 as light wire & accessory grommet, 2 used per box) Replaces: 24179D, 52118D, 248-1146 $104.50 Battery Door fits: 385, 484, 485, 584, 585, IH/Farmall IHS1279 Price $2.15 Battery boxes, parts cont... Restoration quality wiring harness kits for generators USA made cont... Restoration quality wiring harness kits for alternators USA made NOTE: For tractors w/ GENERATORS, not NOTE: For tractors w/ ALTERNATORS, not alternators. Wiring harness kits include regulators. Wiring harness kits include light wires and diagram. Cloth covered like light wires and diagram. Original style original. braiding w/ soldered terminals. Additional alternator conversion harnesses available NOTE: Cut-out relay has two terminals on one side & one by special order. Call or email for a quote. terminal on the other side. Regulator has three terminals on one side & one terminal on the other side or bottom. See page Description / Application IHS2276 $249.75 Wiring Harness Kit (For generator IHS2879 $263.25 Wiring Harness Kit (For 12-volt generator & IHS2881 $395.00 Wiring Harness Kit (For generator & IHS2889 $395.00 Wiring Harness Kit (For generator & IHS2244 IHS2933 (For 12-volt mini alternator) fits: Cub SN: 501 - 115402 w/ distributor only NOTE: Used w/ our ABC535 alternator & IHS2340 bracket kit. Harness must be modified if using a magneto. systems only) fits: 400, (450 up to SN: 11083) gas Row-Crop regulator systems) fits: 450 SN: 11084 & up gas, LP w/ 18 or 21 gallon tank Replaces: 362011R91, 366459R91, 368571R91 regulator systems) fits: 460, 560 gas, LP Row-Crop, Replaces: 370385R92, 370437R92 regulator systems) fits: 460, 560 diesel Row-Crop, Replaces: 370394R91, 375066R91, 376102R91 $4.95 $24.95 Junction Block fits as a light wire junction block: Cub thru W450; Fits as a glow plug wire junction block: 340 thru 706 Replaces: 42915D, 304314R91 NOTE: See website for serial number breaks & full applications. 3 Terminal Junction Block fits as a tail light junction block: Cub SN: 210001 - 224400, Cub LoBoy SN: 10001 - 18700; Fits as a dash/cab junction block: 404 thru 4366 Replaces: 371031R91, 378336R91 ((3) 10-32 studs, 3" c.c. mounting holes) NOTE: See website for additional applications. IHS2921 Application $176.65 Wiring Harness Kit (For 1 wire 12-volt alternator) fits: A, Super A, B, BN series IHS3005 $176.65 Wiring Harness Kit (For 1 wire alternator) IHS2927 $199.95 Wiring Harness Kit (For 1 wire 12-volt IHS2929 $199.95 Wiring Harness Kit (For 1 wire 12-volt Fits: C, Super C w/out fast hitch Price IHS1784 $24.95 ABC1862 Order # alternator) fits: M, MV, (Early Super M up to SN: F28174 & L504801) gas, LP Price IHS843 $3.75 IHS2322 $8.20 Cab Electrical Grommet fits: 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, Hydro 186 Replaces: 376254R1 USA made NOTE: 2 used per tractor; Sold individually. Ignition parts Order # Price IHS234 $54.95 IHS237 $54.95 IHS842 $13.95 ABC011 $19.95 ABC509 $19.99 ABC348 $53.75 $30.00 6-volt Cigarette Lighter w/ Socket fits: 300 thru Early 450 w/ 6-volt system, Replaces: 363420R91, 367903R91 NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". IHS949 262 $30.00 12-volt Cigarette Lighter w/ Socket fits: 300, 330, 340, 350, 400, 450, 460, 560, 600, 650, 660, W400, W450 (All w/ 12-volt system), Replaces: 362000R91, 367904R91 NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price Ignition parts cont... Description / Application Order # Price Coils, Brackets, Resistors Description / Application 12-volt Cigarette Lighter w/ Socket fits: 154 thru 574, 606 thru 1586, 3088 thru 7488, Hydros 70 thru 186, Cub Cadets 71 thru 127, Replaces: 1250545C1, 1265632C91, 378338R91, 378339R91, 378781R91, 382671R91, 382672R91, 393699R91 (1.329" knob O.D.) NOTE: Black plastic knob w/ the word ''LIGHTER'' in white print. Order # Transmission Pressure Sensor Switch............. ABC1605...........$17.95 A distributor requires a battery and coil to operate. A magneto is self sustaining, meaning it does not require a battery to operate and will have a built-in coil. Description / Application Amp Box Grommet fits: A, B, C, H, M & Supers, I, O, W4, 6, 9 series gas, diesel Replaces: 52062D Description Distributors vs. Magnetos Wiring harness grommets Order # Price Fuse Holder...........................................................ABC389.............$10.95 NOTE: Rated at 20 AMP) Fits in 1/2" hole. See website for full applications. alternator) fits: H, HV Cigarette lighters Order # Description Fits: 154 thru 6788 Replaces: 3118643R1, 3106558R2, 3129031R91, 376855R92, 392249R92, 529796R1, 530034R2, 65425C1, 91450C1 ABC3161 6-volt Distributor Coil (O.E.M. style) Fits: Cub thru Early 450 Replaces: 353874R91 NOTE: 1.4 ohm rating. 12-volt Distributor Coil (O.E.M style) Fits: Cub thru 650, Replaces: 353875R91 NOTE: 2.8 ohm rating between the two primary winding terminals. Requires an external resistor. Coil Bracket (For O.E.M style) Fits: A thru 650 using O.E.M style coil Replaces: 353889R1 NOTE: Fits IHS234, IHS237 coils. Zinc plated. Coils, Brackets, Resistors cont... ABC366 $7.75 HOT Coil (55000-Volts) Fits: 12-volt systems NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor. Universal 12-volt Voltage Resistor (2-Terminal Style) fits: IH / Farmall models NOTE: Used to step down 12volt battery. 2 terminal style. Reduces voltage to distributor points. 2.0 Ohms of resistance. Resistor gets very hot. Spark plug wiring sets - USA made IHS801 $36.50 Spark Plug Wiring Set fits: F12, I12, W12, O12, F14, O14, W14 NOTE: Cotton braided wires w/ ring terminals. Tailored; copper core. Like original. IHS1432 $42.75 IHS1428 $42.75 IHS799 $19.99 6-volt Distributor Coil (Metal Housing) & Mounting Bracket fits: Cub thru Early 400 Replaces: 1115379, D502 NOTE: See website for full applications. 12-volt Distributor Coil (Metal Housing) & Mounting Bracket (Externally resisted) Fits: Cub & up when using 12 volt system Replaces: 1115380, 1115381, U505 NOTE: ABC509 includes ABC366 resister. See website for full applications. Description / Application $4.95 NEW! Coil Bracket fits: ABC011, ABC509 & ABC348 coils USA made Spark Plug Wiring Set fits the following w/ F4 magneto: Regular, F20, F30, T20, 10-20 NOTE: For models listed that include push in terminals on magneto cap. Cotton braided wires w/ ring terminals. Tailored; copper core. Like original. Spark Plug Wiring Set fits the following w/ E4A magneto: Regular, F20, F30, T20, 10-20 NOTE: For models listed that use threaded style terminals on magneto cap. Cotton braided wires w/ ring terminals. Tailored; copper core. Like original. Spark Plug Wiring Set fits: Cub, A, B, C, H, M, Supers, I, O, T, W-4, 6 series gas, diesel, 100 thru 504 series (All w/ Distributor or Magneto), Replaces: 352951R91, 356689R92, 407487R1 NOTE: Pre-assembled. Tailored; copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Ignition parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 263 Electrical parts Electrical parts Price Price $152.00 NEW! Wiring Harness Kit Conversion Transmission pressure switch Fits: Cub thru 4586 Replaces: 354232R91, 365515R91, 376852R91 USA made IH/Farmall IH/Farmall Order # Order # IHS3276 344B for a further explanation. Fuse holder Ignition parts cont... Order # Price Ignition parts cont... Description / Application Order # Price Spark plug wiring sets - USA made cont... FDS149 ACS228 IHS2537 ABC2863 ACS309 $27.50 $43.60 $19.85 $19.85 Spark Plug Wiring Set w/ 90° Boots Fits: 4-cyl. models except F12, I12, W12, O12, F14, O14, W14 NOTE: Cut to length. Copper core w/ aluminum coating to prevent corrosion. ABC169 Spark Plug Wiring Set w/ Straight Boots Fits: 4-cyl. models except F12, I12, W12, O12, F14, O14, W14 NOTE: Cut to length. Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. ABC170 $7.20 $4.25 Spark Plug Wiring Set w/ 90° Boots Fits: 6-cyl. models NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. Spark Plug Wire Grommet fits: Cub, Cub LoBoy 154, 184, 185; Also fits 154, 185 as a right front side sheet grommet for battery cable & ignition wires, Replaces: 127979, 37635R91 $4.85 Fits: Cub, Cub LoBoy, A, B, C, H, M & Supers, I, O, T, W-4 & 6 series, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 504, 544, 574, 674, 2400, 2424, 2444, 2500, 3500, 3514 ABC324 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 3116, Plug Gap .025 264 $6.95 Fits: 340, 460, 504, 560, 606, 656, 660, (706 w/ D-282 ); Industrials: TD340, 3514, 3616, 3800, 3850, TD-6 (62 series), TD9 (92 series), TD9B (All w/ D166, 188, 236, 282, 301" diesel engines), Replaces: 304131R3, 343894R1, 343977R1 (0.197" tip diameter, 4.943" over all length & 0.311" O.D. where it slides into the head) Description Order # Price Distributor, parts Description / Application Distributor only. See page 344B to identify an IH distributor. Distributor Tachometer Drive Housing Block Off Plate w/ Gasket fits: Cub thru 650 (All w/out tachometer drive) Replaces: 363764R1, 363765R1 USA made Will not fit Delco or Prestolite: IHS766 $29.95 Distributor Hold Down Clamp (For 3/8" hold down bolt) fits following w/ Delco 1111411 vertical conversion distributor: A, B, C, H, M, Supers, I, O, W4, 6, 9 series NOTE: 2 used per engine; Sold individually. Drive Gear, Replaces: 353902R1, 531461R1 NOTE: Drive pin hole thru both sides like original. IHS815 $28.95 Drive Shaft, Replaces: 353934R11 ABC121 $11.50 Cap, Replaces: 351693R92 NOTE: For 560 order IHS947 cap. IHS739 $12.50 Cap Spring Clip, Replaces: 353894R1, 107384C1 IHS737 $7.50 Cap Spring Clip Bracket w/ Screw & Lock Washer, Replaces: 353895R1 (bracket), 121832 (screw), 107386C1 (Screw size: 8-32 x 3/8) IHS988 $6.95 Terminal Screw (For IH 4 Cyl. Distributors) Replaces: 353907R1 USA made IHS1294 $3.55 Distributor Insulating Terminal Washer (For IH 4 Cyl. Distributors) Replaces: 251538R1 USA made IHS974 $4.00 Spring Anchor Terminal Insulator Replaces: 353900R11 IHS763 $12.80 Dust Cover w/ Gasket Replaces: 353900R11 IHS703 $3.95 Rotor Button, Replaces: 353896R91 IHS370 $32.65 Ignition Tune-up Kit (Rotor, points, condenser & spark plugs) (18 MM, 1/2" reach, 7/8" hex spark plug, Battery Ignition - 1939 thru 79, Except 560) NOTE: Plug Gap .025, Point Gap .020. IHS846 $18.95 Ignition Tune-up Kit (Rotor, point set & condenser) (Battery Ignition - 1939 thru 79, (560 w/ 367839R92 or 371579R92 Distributor) (For 504 only order IHS848) NOTE: Point Gap .020. IHS3166 $35.00 NEW! 5-pc. Distributor Shaft Bushing & Shim Kit (2.006" length) USA made NOTE: Does not fit 560. Distributor Hold Down Clamp (For 5/16" hold down bolt) fits the following w/ IH horizontal distributor: A, B, C, H, M, Supers, I, O, W4, 6, 9 series, 100 thru 504, (460 thru 856 w/ vertical distributor), Replaces: 353937R1 NOTE: 2 used per engine; Sold individually. See website for full applications. Description distributors for the stock IH distributor. See page 344B for a For the above tractors using IH 353898R11 - Horizontal Fits: 'Some' B-250, B-275, B-276, Early B-414, Early 3414 w/ Lucas distributor & BC-144 engines up to SN: 6343 Replaces: 3047513R1 Glow Plug..............................................................IHS1604............$16.50 NOTE: Sold individually. Order # Order # Price Price Distributor Cap (For Lucas Distributor)..........ABC2633...........$38.75 NOTE: Cap is threaded for spark plug wire ends. further explanation. Order # Price Description / Application IHS1716 $294.95 4-cylinder Horizontal IH Distributor only Fits: A thru 504 series, 2404 thru 3514 gas, LP, I, O, T, W4 thru 6 series Replaces: Casting #353898R11 NOTE: Not correct for Cub or 9 series. Does not include base or tachometer drive. Cast steel housing like original. IHS3112 $58.50 Spark plugs (Autolite) NOTE: Check spark plug specifications before ordering as some models may use more than one type. ABC324 $6.95 Glow plug Know your distributor! IHC offered replacement Delco Spark Plug Wiring Set w/ Straight Boots Fits: 6-cyl. models NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. ABC2523 IHS2531 $29.50 $1.05 Fits: 560, 606, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 3616, Hydro 70, Hydro 86, T4, T5 & T340; 500, 600 Crawlers ABC170 specifications: 18 mm thread, 1/2" reach, 7/8" hex, Autolite 386, Plug Gap .025 Tailored Spark Plug Wire Set w/ Straight Boots fits: 460 thru 856; Hydros: 70, 86 Replaces: 278294R91 NOTE: See website for full applications. Spark Plug Wire Set fits: Some B-250, B-275, B-276, Early 3414 w/ Lucas distributor & BC144 engine up to SN: 6343 Replaces: 3044219R93 NOTE: Set has threaded distributor & coil ends. Copper core, waterproof neoprene tailored wires. Price $7.95 Fits: F12, F14, F20, F30, O12, O14, W12, W14, W30, W40, WK-40, Fairway 12, 14, W9, WR9, WR9S, 10-20, 15-30, 22-36 ABC169 specifications: 7/8" x 18 thread, 5/8" reach, 15/16" hex, Autolite 3076, Plug Gap .025 Spark Plug Cable Loom Bracket Serviceable for Cub, Cub LoBoy 154, 184, 185, Replaces: 251426R1 ABC1807 Order # IHS3125 IHS3121 $7.95 Distributor Drive Housing (USED, not New) w/ Opening for Tachometer Drive fits: Cub thru 650 equipped w/ tachometer drive; Will also fit Letter series w/out drive by ordering # IHS3125 block off plate, Replaces: 363749R91, 363763R11 USA made NOTE: Use w/ IHS1716 distributor when replacing a magneto. Tachometer drive, housing, or block off plate sold separately. Tachometer Connection Housing Plate w/ Gasket fits: Cub thru 650 (Same as IHS1905), Replaces: 363817R1 (plate), 363814R2 (gasket) USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm (For IH horizontal distributors only) Fits: Cub, Cub Lo-Boys 154, 184, 185, A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 series gas, diesel, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, (560 6-cyl.) 600 & 650 (4-cyl.); Industrials: 500 Crawler, T5, T340, TD14 & TD14A IHS766 IHS815 IHS737 IHS763 IHS988 IHS703 ABC121 IHS739 IHS1294 IHS974 IHS370 Description (For LATE Delco Distributor w/ screw held cap) Fits: Some 454, 464, 544, 574, 674, 2400, 2500 series using Delco screw held cap, Replaces: Delco 1960833 NOTE: Fits Delco distributor #'s 1112477, 1112489, 1112697. ABC141 IHS846 Order # Price ABC141 $10.95 IHS3166 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com ABC2428 ABC333 Description Distributor Cap (For LATE Delco Distributor w/ screw held cap) Distributors, parts continue on next page 265 Electrical parts Electrical parts ABC326 $15.95 Description / Application Spark plugs (Autolite) cont... IH distributor parts IH/Farmall IH/Farmall MFS2186 $12.50 Distributor, parts cont... Distributor, parts cont... Distributor, parts cont... (For LATE Delco Distributor w/ screw held cap) Fits: Some 454, 464, 544, 574, 674, 2400, 2500 series using Delco screw held cap, Replaces: Delco 1960833 NOTE: Fits Delco distributor #'s 1112477, 1112489, 1112697. (For Delco Vertical distributor only) fits: Some A, B, C, H, M & Supers, I, O, T, W4 & W6 series gas, LP only Order # Price Description ABC2428 $14.85 Dust Cover (For Delco w/ screw held cap) ABC333 $9.10 Ignition Tune-Up Kit (For Delco-Remy Systems w/ screw held cap) fits: Some 454, 464, 544, 574, 674, Replaces: 19545587, 1954566, 1956007, 1962640 USA made NOTE: Kit contains: Heavy duty point set, vibration resistant condenser & rotor; Point Gap .025 ABC498 ABC500 WICO magneto, parts (OEM) - USA made ABC276 Order # Price XH1344 ABC3007 ABC520 ABC186 ABC511 ABC018 WICO Magneto (Model XH1344) Fits: A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 series, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650 gas Power Units: U2 to U6 gas (Clockwise rotation) $424.95 ABC488L MAG6 ABC488S Description / Application $14.50 Instructions & Parts List (1959) WICO XH & XHD Magneto Service ABC514 IHC F4 & F6 magneto parts - USA made Fits: Some 22-36 & W-40; some I, O, T, W4 thru 9 series; Industrials: TD6 thru TD18 F4 POINTS F4COIL F4CONDENSOR The following parts will fit the IHC F4 & F6 Magneto: Order # Price Description F4 POINTS $20.75 Points, Replaces: 21367D F4COIL $65.15 Coil, Replaces: 21401D, 21401DAX, NOTE: Point Gap .013 57926DX F4 $14.65 Condenser, Replaces: 21409D, CONDENSOR 21409DA ABC556 Delco conversion distributor parts Fits: 460, 504, (560 except tune-up kit), 606, 656, 660, 706, 756, 806, 826, 856 & 3616 & most 6 cyl. gas Combines w/ clip held cap For the above tractors using Delco 1111411 - Vertical Distributor w/ round insulating terminal. See page 344B to identify an IH distributor: ABC498 IHS763 IHS703 IHS947 IHS988 IHS1294 IHS848 ABC500 Price $14.95 $14.95 For the above tractors using IH Distributor. See page 344B to ABC276 $9.85 ABC488L (31/32" Bracket) $13.95 identify an IH distributor. Will not fit Delco or Prestolite: Order # IHS763 Price $12.80 Description Dust Cover w/ Gasket Replaces: 353900R11 NOTE: Will not fit Delco or Prestolite. IHS703 $3.95 Rotor Button, Replaces: 353896R91 NOTE: Will not fit Delco or Prestolite. IHS947 $12.50 Distributor Cap, Replaces: 368062R91 USA made NOTE: Will not fit Delco or Prestolite. IHS988 IHS1294 IHS848 $6.95 $3.55 $25.90 Terminal Screw (For IH 6 Cyl. Distributors) Replaces: 353907R1 USA made Distributor Insulating Terminal Washer (For IH 6 Cyl. Distributors) Replaces: 251538R1 USA made Ignition Tune-up Kit (Rotor, point set & condenser) fits: 460 thru 856, (For 560 only order IHS846) NOTE: Point Gap .020; Will not fit Delco or Prestolite. Terminal Insulator Assembly NOTE: Fits Delco distributor housings only w/ .300" dia. round hole Distributor Cap (For EARLY Delco Distributor w/ clip held cap thru 1963) ABC488S (11/16" Bracket) Distributor Cap Spring Clip w/ Bracket ABC488L: Replaces: 1889967, 1889999 (bracket) (2-1/4" o/a length) $13.95 ABC488S: Replaces: 1889967, 1847289 (bracket) NOTE: Fits Delco only. ABC3007 $22.95 ABC511 (6-volt) ABC514 (12-volt) Delco Distributor Shaft Bushing & Shim Kit, Replaces: 810074, 810078, 811912, 1909003 (0.486" I.D., 0.656" O.D., 2.867" length) USA made NOTE: Bushing must be sized to shaft after installation. Distributor Tag w/ (2) Rivets (For Delco Remy Distributor) (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. $14.45 rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. $14.45 ABC520 $3.95 Rotor Button ABC186 $9.80 Dust Cover w/ Felt, Gasket & Washer (For Delco-Remy w/ clip held cap) ABC018 $10.75 Ignition Tune-Up Kit w/ Rotor (For Delco Distributors w/ clip held cap thru 1963) NOTE: Kit contains: Points, condenser & rotor. Point Gap .020. ABC556 266 Terminal Insulator Assembly NOTE: Fits Delco distributor housings only w/ .345" dia. round hole $2.50 Distributor Mounting Gasket Replaces: 55780DD, 55780DE USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FXH2403 FXG2002A-2 FXG1008 ABC556 The following parts will fit the XH1344 Magneto: Order # Price IHC J4 magneto parts Fits: Cub, Cub Lo-Boy Description FXH2100B $22.45 Points FXH2024 $15.25 Condenser FXH2403 $57.50 Coil FXG2002A-2 $60.15 Cap FXG1008 $33.95 Rotor ABC556 $2.50 Mounting Gasket J4 POINTS ABC121 IHC H4 magneto parts IHS988 Fits: A, B, C, H, M, Supers, I, O, T, W-4, 6, 9 thru TD14 series, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650; Power units: U2 to UD14 F4CONDENSOR F4COIL ABC122 ABC482 ABC486 ABC556 ABC120 The following parts will fit the IHC H4 Magneto: F4CONDENSOR IHS1492 IHS974 J4 CONDENSOR J4 ROTOR J4 COIL IHS1166 Electrical parts Electrical parts 6-cylinder distributor parts Description FXH2024 IH/Farmall IH/Farmall Order # FXH2100B IHS1294 The following parts will fit the IHC J4 Magneto: Order # Price J4 POINTS $9.95 Point Set, Replaces: 353172R91 NOTE: Point gap .020. F4 CONDENSOR $14.65 F4 Condenser fits: J4 magneto up to SN: 81410, Replaces: 354136R92, 373892R91 USA made J4 CONDENSOR $7.95 J4 Condenser fits: J4 magneto SN: 81411 & up, Replaces: 353903R92 J4 COIL $76.10 Coil, Replaces: 352355R91, 396531R1 USA made Description Description Order # Price F4 CONDENSOR $14.65 Condenser ABC121 $11.50 Cap, Replaces: 351693R92 USA made NOTE: For 560 order IHS947 cap. F4COIL $65.15 Coil IHS1492 $49.50 ABC122 $21.75 Cap, Replaces: 47413DYC NOTE: Power units: U2 to UD14. Top Cover / Coil Cover w/ Gasket Replaces: 251502R11 J4 ROTOR $39.95 Rotor, Replaces: 351692R91 ABC482 $25.95 Coil Cover w/ IHC logo Replaces: 47449DAY NOTE: Power units: U2 to UD14. IHS1166 $12.95 J4 Magneto Gasket Set IHS988 $6.95 Terminal Screw fits: J4 magneto SN: 139748 & up, Replaces: 353907R1 USA made IHS974 $4.00 Insulator fits: J4 magneto SN: 139748 & up, Replaces: 353906R11 IHS1294 $3.55 Magneto Insulating Terminal Washer Replaces: 251538R1 USA made ABC486 $8.95 Gasket Set ABC120 $24.25 Ignition Tune-Up Kit (Rotor, points, condenser) NOTE: Point Gap .015; Power units: U2 to UD14. ABC556 $2.50 Mounting Gasket STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 267 Need fan belts? See pg. 250 Generator parts cont... Order # Generator parts Order # Price ABC1207 $17.95 ABC511 (6-volt) $14.45 ABC514 (12-volt) $14.45 Price Description / Application Generator Belts cont... Description / Application IHS1246BELT Generator Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Starter Housing) fits: Cub thru WD9, 100 thru 450, Replaces: 1872638 (1-5/8" wide) USA made NOTE: Stainless steel. Generator Tag w/ 2 Rivets Fits: Tractors & Industrial using Delco Remy generator (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. Voltage regulators, parts cont... Order # Price Description / Application ABC185 $32.95 12-volt (4 Terminal) Voltage Regulator (Base Mount) fits: Cub SN: 221293 248124, Cub Cadet 70, 100, Cub LoBoy SN: 16398 & up (not 154), MD, 140 SN: 26801 & up, 460, 560, 600, 650 (All w/ generator 1100356, 1100401, 1100394 & 1100395) Replaces: 376122R91, 121577C1 NOTE: For 12-volt generator system. $12.00 Fits: H, Super H, W4 alternator only IHS141 $11.95 Fits: M & Supers, I, O, T, W6 series, 400, 450 gas; Also fits the following diesels: 444, 2444, Replaces: 49341D (1/2" x 33-1/4) ABC1148 $28.95 Voltage regulators, parts NOTE: Cut-out relay has two terminals on one side & one terminal on the other side. Regulator has three terminals on one side & one terminal on the other side or bottom. See page Generator Pulleys $44.95 Electrical parts $44.95 ABC100 $8.85 $11.00 Fits: Cub Engine SN: 165153 & up, Cub LoBoy, Replaces: 358213R1 (1/2" x 22) NOTE: Will not fit 154, 184, 185. Fits: A, Super A, A1 up to SN: 317191, B, C, Super C up to SN: 114645 Replaces: 49291D (1/2" wide x 24-1/4" long) ABC104 $12.15 Fits: Super A, A1 SN: 317192 & up, Super C SN: 114646 & up, 100, 130, 200, 230; Also fits the following diesels: ID6, MD, Super MD, SWD6, WD6, 400, 450, W450, Replaces: 52318DA (1/2" x 26-3/4) 268 Description / Application IHS1258 $90.30 Cut-out Relay Assembly (Saddle mount, 2 terminal replaces original 3 terminal cut out) fits: Farmall Cub up to SN: 115402, IH Cub LoBoy up to SN: 16397, A, AV, Super A up to SN: 345198, B, BN, C up to SN: 47125, H up to SN: 340953, I4, I6 up to SN: 36785, I9, M up to SN: 229910, Early O4, OS4, O6 up to SN: 29473, OS6 up to SN: 29473, Early W4, W6 up to SN: 29473, W9 up to SN: 48740, Replaces: 46412D, Delco 1116766 USA made NOTE: This is a 2 terminal cutout that only fits tractors equipped w/ lights. $32.95 Fits: Cub up to Engine SN: 165152 Replaces: 351321R1 (1/2" x 20) $10.50 $9.50 Price ABC153 ABC103 IHS235 Order # 2-pc. Adjustable Generator Pulley Fits the following: H, M, MTA, Super series; I4, I6, I9, O4, O6, O9, W4, W6, W9 gas, LP, Early 300, (400, 600, 650 gas, LP) w/ generators 1101355, 1101423, 1100501 Replaces: 6745D, DA, 6746D, DA Generator Belts ABC099 344B for a further explanation. Fits: H, Super H, W4, Super W4, I4, 3414 424, 600, 650, 2424, 3414 Replaces: 48878D (1/2" x 30-1/4") ABC152 ABC188 $32.95 6-volt (4 Terminal) Voltage Regulator (Saddle Mount) fits: Cub, Cub LoBoy, A, Super A, B, C, H, M, I, O, T, W-4, 6, 9 series gas using Generator 1101423 & 1101355, Replaces: 46412D, Delco 1116766, 1116809 NOTE: Provides 2-unit positive ground generator mounted regulator. 6-volt (4-Terminal) Voltage Regulator (Base Mount) fits: Cub, Cub LoBoy, Super A, C, Super C, H, Super H, M, Super M, Super MTA, I4, I6, I9, O4, W4, W6, W9, WR9, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 450, (All w/ generator 1100055, 1100501, 1101377, 1101851, 1101852, 1101853, 1101854, 1101855, 1101856, 1101857, 1101858) Replaces: D657, 1116807, 1116816, 1118291, 1118308, 1118780, 1118982, 1119575, 121578C1, 354234R91, 360898R1 $45.55 Voltage Regulator Conversion Kit Fits: IH models w/ original cut-out to update to a voltage regulator STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application $39.95 Alternator Bracket Kit fits: Cub, Cub LoBoy USA made NOTE: Use with ABC535 alternator only. Can use existing belt, (the belt will ride over the pulley but still work), OR order #ABC2315 pulley for wider belt width. Direct bolt on, no cutting on hood! IHS2349 $49.99 Alternator Bracket Kit fits: A, B, C, Supers, 100, 130, 200, 230 USA made NOTE: Use w/ ABC418 alternator & existing belt. IHS1246 $52.15 Alternator Bracket Kit fits: I4, O4, OS4, Super H, Super W4 gas, LP; H SN: 125250 & up gas, LP; W4 SN: 5864 & up gas, LP USA made NOTE: Allows use of ABC418 alternator to mount under hood w/ out cutting hood. The belt that is included will not work for 300 & 350. To fit earlier serial number tractors customer must modify top radiator brace for alternator clearance. IHS1246BK $45.00 Alternator Brackets only (For IHS1246) Fits: 300, 350, I4, O4, OS4, Super H, Super W4 gas, LP; H SN: 125250 & up gas, LP; W4 SN: 5864 & up gas, LP USA made NOTE: Use w/ ABC418 alternator IHS829 $34.95 Alternator Bracket Kit fits: M, MV (both w/ SN: 63325 & up), Super M, MTA, O6 SN: 7027 & up, W6 SN: 7068 & up, 400, W400, 450, W450 NOTE: Used when switching from a generator to ABC418 Alternator. To fit earlier serial number tractors customer must modify or delete top radiator brace. ABC404 $34.95 63 Amp Alternator w/ Pulley Fits: IH models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery! Must rev engine to 800 - 850 RPM in order for unit to self excite. Universal Mounting Kit fits: IH models NOTE: Used when switching from a generator to an alternator. Does NOT include top adjusting bracket. May have to be drilled or modified for your application. ABC529 $23.50 Pulley only (For ABC418) (.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width) Universal Top Adjusting Bracket Fits: IH models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models. IHS960 $34.25 Alternator Shield fits: 544 gas, Farmall 656 gas up to SN: 47397, IH 656 gas up to SN: 14794, Farmall 706 SN: 37237 & up, IH 706 SN: 5274 & up, 756 gas, Farmall 806 SN: 33163 & up, IH 806 SN: 7101 & up, 826 gas, 856, 1026, Farmall 1206 SN: 11793 & up, IH 1206 SN: 8384 & up, Replaces: 396360R1, 396360R2 USA made 12-volt (4-Terminal) Voltage Regulator (Base Mount) fits the following: Hydro 100, 444, 504, 544, 606, 656, 664, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 2444, 2504, 2544, 2656, 2706, 2756, 2806, 2826, 2856, 3800, 3850, 4156, 21026, 21206, 21256, 21456 (All w/ Factory Alternator) Replaces: 65304C1, 65302C1, 384988R91 Order # Alternators, parts NOTE: Alternators are NEW not rebuilt • To convert 6-volt to 12-volt system. For negative ground systems. Order # ABC535 ABC2315 ABC418 ABC1426 ABC495 Price Description / Application $149.95 Mini 41 Amp Maximum Alternator w/ Pulley & Diode fits: Cub, Cub LoBoy using IHS2340 bracket kit (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3-wire internal regulator that requires an excitation circuit. Includes instructions. $34.95 $99.95 $19.95 Alternator Pulley (For ABC535) (0.587" ID, 1.437" o/a length, 3" pulley O.D., 5/8" belt width) USA made $19.95 Pulley only (For ABC418) (.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 269 Electrical parts IHS1701 Generator Pulley fits the following using a 1-1/4" exposed generator shaft: Super A SN: 317192 & up, C SN: 47126 & up, 100, 130, 200, 230 Fits the following gas: Early 300 thru 450 Fits generators 1100531, 1100996, Replaces: 363366R1 (3" O.D., 2.104" long) NOTE: Improved ductile iron. Price IHS2340 IH/Farmall IH/Farmall IHS1699 Alternators, parts cont... Starter parts Order # Price Starter parts cont... Description / Application Order # Price Starter Solenoid Relay Assemblies ABC138 $29.95 $20.75 Electrical parts 12-volt Starter Solenoid (4 Terminal) (For 30, 35 MT series Delco starters) Fits: Late 350, 450 LP, 400, 450 diesels, W400, W450 gas, diesel, 600, 650 gas, diesel; Fits the following diesels: 454, 544, 560, 574, 656, 660, 684, 706, 756, 806, 826, 856, 1206, 1256, 1456, Early 766 thru 1568, Early 4166, Replaces: 65479C2, 585618C91 12-volt Starter Solenoid (3 Terminal) (For Delco starters) fits: 424, 444, 460, 464, 504, 606, 674 & 3414 gas, diesel, LP (All w/ Delco starter); 3514, 3616; 340 diesel w/ starter 1108657; 350; 666, 686 synco w/ starter 1109252; The following gas only: 404, 454, 544, 560, 574, 656, 666, 686, 706, 756, 766, 806, 826, 856, Hydro 70, Hydro 86, Replaces: 65478C1, 594185C1 IHS132 $44.95 IHS1292 $52.95 ABC1939 $17.95 ABC1203 $17.95 ABC1435 $17.95 $5.35 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals) NOTE: Brass. ABC506 $5.30 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) NOTE: Brass. Starter Drives, parts ABC458 ABC507 $39.50 Original Spring Style Starter Drive (Bendix) fits: A, B, C, H, M & Supers, I, O, T, W4, 6 series gas (except T6), 100, 130, 140 up to SN: 26800, 200, 230, 240, 300, 330, 340, 350, 400, 450 (All gas), Services Delco Starters: 1107021, 1107060, 1107067, 1107093, 1107169, 1107174, 1 107408, 1107412, 1107427, 1107444, 1107448, 1107491, 1107886, 1108012, 1108016, 1108038, 1108041, 1108080, 1108093, 1108096, 1108097, 1108098, 1108173, 1108174, 1108185 NOTE: Original spring style. 10 teeth. $23.95 Starter Drive Spring only (For ABC458 Starter Drive), Replaces: 1860639 270 Price ABC547 ABC511 (6-volt) ABC514 (12-volt) $41.95 Starter Drive (Bendix) fits: Same as ABC458 Starter Drive, Replaces: 1868804 NOTE: Improved positive ratchet style drive. 10 teeth. Starter Drive Housing fits: A thru M, (Super H to SN: 19233), Super M SN: F501 to F28174 & L500001 to L504801, I, O, W4, 6 series, 100, 130, (140 up to SN: 26800), 200, 230, 240 (w/ 2 bolt nose), Replaces: Delco: 1878661, 1887109, 1910093, 1943759, For starters: 1107021, 1107060, 1107067, 1107093, 1107174, 1107427, 1107448, 1108096 NOTE: No returns if broken. Starter Commutator (Brush) Band Cover (For 3-3/4" O.D. Delco starter housing) Fits: Cub up to SN: 224400, Cub LoBoy up to SN: 18700 both using Delco Starter # 1109603, 1109613, Replaces: 1887889 USA made NOTE: Stainless steel. Starter Commutator (Brush) Band Cover (For 4-1/2" O.D. Delco Starter Housing) Fits: A thru W6, 100 thru (560 LP) Replaces: 1886923 (1-3/16" wide) USA made NOTE: Stainless steel. Starter Commutator (Brush) Band Cover (For 5" O.D. Delco starter housing) Fits: MD & Supers, ID6, ID9, OD6, TD6, TD9 4-cyl., WD6, WD9 & Supers, 400 diesel, 450 diesel, 460 diesel, 560 diesel, (600, 650 gas, diesel), 660 diesel Replaces: 1880355, 1889664 (1-3/4" wide, 5" O.D.) USA made NOTE: Stainless steel. Starter Drive (Bendix) fits: Farmall Cub up to SN: 224400, Cub LoBoy up to SN: 18700 w/ starter 1109603, 1109611, 1109613, T6 w/ starter 1107435 Replaces: 1858522, 1850844 NOTE: Original spring style. 10 teeth. $14.45 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price $11.95 IHS1635 $14.95 Manual Starter Switch (Saddle Mount) Fits: Cub, Cub LoBoy, A, B, C & Supers, Super H, Super M, MTA, Super W6, W9, Super WD6, WD-9, WR-9, WDR-9, 100, 130, 140, 200, 230; W9, WR-9S, WD-9 Supers using starter 1108925, 1108943 Replaces: Delco 1918405, 1919600 (2 Mounting holes, .190" I.D., 1-3/8" centers) IHS3263 $39.50 MFS140 $14.95 NEW! Foot Starter Switch Actuator Lever & Bracket fits: H, M, MD, Early Super H & Super M & MD (All using foot activated starter switch) Replaces: 351922R11 (lever), 351924R1 (bracket) USA made NOTE: All using a foot activated starter switch that mounts to the steering post. Push Button Switches Starter Lever fits: Cub SN: 501 - 128798 Replaces: 351347R2 (7.369" long) USA made IHS440 Description / Application Starter Switches, parts cont... Starter Switches, parts ABC012 Manual Starter Switch (Base Mount) Fits: Cub SN: 224401 - 239826, Cub Loboy SN: 18701 & up, 140 SN: 26801 - 45000 Replaces: 376295R91 (Top of mounting plate to end of button = 1", 1-3/4" c.c. bolt holes) $7.50 Lever fits: ABC012 applications except Cub up to SN: 128799 Replaces: 1918322, 1919434 IHS1247 $19.95 Starter Switch Pull Rod fits: A, AV, B, BN SN: 42757 & up; Super A, Super AV, 100, 130, (140 up to SN: 26800) Replaces: 350739R2, 55757DA (23-3/8" length, 1/4" dia.) USA made NOTE: Shorter than original for A, B. IHS3074 $24.50 Starter Switch Pull Rod fits: C, Super C, 200, 230, Replaces: 351446R2 (28-1/2" length, 1/4" O.D.) USA made NOTE: Zinc plated. IHS3082 $24.50 Starter Switch Pull Rod fits: Super M, Super MV SN: F28175 - F52627 & L504802 - L512541 gas, LP Replaces: 358266R1 (24-5/8" length, 1/4" O.D.) USA made NOTE: Zinc plated. IHS3107 $26.50 Starter Switch Pull Rod fits: MTA, Super MTA, Super MVTA gas, LP Replaces: 358923R1 (28 1/2" length) USA made ABC066 $16.40 IHS1563 $24.95 $14.45 Starter Tag w/ 2 Rivets fits: Tractors & Industrial using Delco Remy starter (2.5" long, .800" wide, .150" dia. rivet hole, 2" c.c. rivet holes) USA made NOTE: Stamped w/ raised letters. Customer must stamp numbers. Description / Application Manual Starter Switch (Base Mount) (For 7/8" hole) fits: H, M, Early Supers, I, O & W-4, 6 series gas, diesel Replaces: 64931H, 356913R91, Delco 405C NOTE: Will work on 6 or 12 volt. IHS798 $12.95 Push Button Starter Switch Fits: 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 560, 606, 656, 660, 706, 806, 1206, 4100, 4156, 4166, 4186 Combines: T4 thru Early TD5 Replaces: 366316R91, 366317R93 NOTE: Wires attach to switch w/ eyelets & screws. IHS800 $13.25 Push Button Starter Switch (O.E.M.) Fits: 385, 395, 444, 454, 464, 484, 485, 495, 544, 574, 584, 585, 595, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400A, 2500A, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 4366, 4386, 4568, 4586, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488 Hydros: 70, 86, 100, 186, Replaces: 397940R93 USA made NOTE: Wires attach to switch w/ spade terminals. ABC233 $12.50 Universal 2-Terminal Starter Switch, Extra heavy duty momentary push button switch fits: Ag & Light Industrial equipment; Also fits Cub - 4586 as a Horn or glow plug switch Replaces: 373611R91 (Mounting stem 5/8"- 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. Two screw type terminal. Up to 35 V (DC), rubber cap for dust and moisture protection Starter Switch Box fits: H, HV when factory equipped w/ battery ignition or H w/ magneto ignition SN: 137831 & up Replaces: 9357D NOTE: Cast iron. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Starter parts continue on next page 271 Electrical parts ABC508 Order # Starter parts cont... IH/Farmall IH/Farmall ABC1179 $36.95 Description / Application Starter Drives, parts cont... 12-volt Solenoid Switch (3 Post Saddle Mount) fits: 140, 300 LP, 350, 400 LP Replaces: DR1467, 1114545 NOTE: 12-volt systems only. ABC1366 Starter parts cont... Starter parts cont... Order # Price Starter parts cont... Description / Application Order # Price Push Button Switches cont... ABC3208 $22.50 Description / Application NEW! Neutral Starting Switch (O.E.M.) Fits: Cub SN: 239827 & up, 140 SN: 45001 & up, 154, 185, 385, (484 SN: 6501 & up), 485 SN: 7100 & up, 544, (584 SN: 6953 & up), 585 SN: 9312 & up, (656 gas, diesel, Hydro), 664, 666, (684 SN: 7253 & up), 685 SN: 10178 & up, 686, 706 thru 1456, 766 thru 1586, 3088 thru 6788; Hydros 70, (84 SN: 7253 & up), 86, 100, 186 Replaces: 121629C3 (5/8" - 32 thread, 2 spades, 2.575" o/a length) USA made NOTE: See website for all applications. IHS760 $19.95 $39.95 Electrical parts IHS1107 $32.50 Push / Pull 2 Screw Type Terminal Ignition Switch fits: Cub, A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 series, 100, 130, (140 up to SN: 26800), 200, 230 gas, diesel w/ Battery ignition Replaces: 62801DC ACS288 $6.95 $35.95 Push / Pull Ignition Switch Knob only Fits: IHS381, IHS382 Ignition Switches Replaces: 8732D (10 - 32 thread) ABC398 ABC489 $8.20 $15.95 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment w/ Battery ignition (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. This can be used on battery ignition systems only Magneto Push / Pull Ignition Switch Fits: Cub, A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 series gas, diesel w/ Magneto ignition NOTE: One screw type terminal; Out: ON; In: OFF. Does not have original look, but works great! Ignition / Key Switches ABC065 $12.95 Ignition / Key Switch w/ 2 Keys & Mounting Nut Fits: IH models NOTE: 2 wire switch; May have to drill hole to 0.800" on some applications. 272 IHS831 IHS3268 $32.10 $16.95 Ignition / Key Switch w/ 2 Keys & Mounting Nut (O.E.M) fits: Cub SN: 224401 - 239826, Cub LoBoy: SN 18701 & up, Cub Cadet 70 & 100, (140 SN: 26801-45000), 240, 330, 340, 350, 404, 424, 444, 450, W450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 2404, 2424, 2444, 3444, 3514, 3616, 4100, 4156, 4166, 4186, 4366, 4386 Hydros: 70, 86, 100; Combine: Early 615 - 915; Crawlers: T4, T5, TD-5 (All SN: 3088 & up), Replaces: 366313R91, 370375R91, 379594R92, 403562R2, 636365R91 (.800" hole dia.) USA made NOTE: 2 spade terminal switch; May have to drill hole to 0.800" on some applications. Ignition / Key Switch w/ 1 Key (O.E.M) (For .800" hole dia.) fits: 140 SN: 45001 & up, Cub SN: 239827 & up, Cub LoBoy: 154, 184, 185; Cub Cadet: 70, 71, 72, 73, 100, 102, 104, 105, 106, 107, 108, 122, 123, 124, 125, 126, 127, 147, Replaces: 60736C2 USA made NOTE: Three spade terminals. Ignition / Key Switch w/ 2 Keys Fits: 300, 400, W400 Replaces: 300557R91, 361998R93 (.995" dia. threaded end) NOTE: Five spade terminals. Can replace 4 terminal switch since switch has 2 battery terminals. Ignition / Key Switch w/ 2 Keys & Mounting Nut (O.E.M) fits: 464 SN: 109151 & up, 574 SN: 114909 & up gas, diesel, 674 SN: 108105 & up gas, diesel, 786, 886, 986, 1086, 1486, 1586, 2500A SN: 114909 & up, 3388, 3588, 3788, 4386, 4586, 4786; Combines: Late 715 - 1480; Hydro: 186, Replaces: 107682C1, 71427C1 (3/4"-20 UNEF threaded stem) USA made NOTE: Five spade terminals. NEW! 3-Position Key Switch w/ 2 Keys Fits: Some 354, 385, 454, (464 up to SN: 109150), 484, (574 up to SN: 114908), 584, (674 up to SN: 108104), 684, 784, 884, Hydro 84; Industrial: 260A, 2300, 2400, (2500 up to SN: 114908) (All w/ (6) 0.250" wide spade terminals) Replaces: 529800R91 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Ignition / Key Switches cont... ABC3272 ABC400 $14.95 $14.85 NEW! Ignition / Key Switch w/ 2 Keys Fits: IH 485, 585, 685, 785; Case IH 238, 248, 258, 268, 685, Replaces: 3107556R93 (6 spade terminals: (2) 0.375" wide, (4) 0.250" wide, 0.625" threaded end, 4-position on heat start) Ignition / Key Switch w/ 2 Keys & Mounting Nut fits: Ag & Light Industrial equipment (3/4" dia. thread) NOTE: Four stud type terminals. Ignition Keys KEY05 $4.65 KEY01 $4.50 FDS400 $2.95 Ignition Key (For IHS760, IHS831, IHS1107 Switches) fits: Late Cub - 7488; Hydros: 70, 84, 86, 100, 186; Lawn & Garden: 70, 100, Replaces: 382458R1, 131313C1 USA made Ignition Key (For ACS288 Ignition Switch) fits: 300, 400, W400 (All w/ Delco switch) Ignition Key fits: 354, 364, 384, 385, 454, 464, 484, 485, 584, 585, 674, 684, 685, 784, 884, 885, Replaces: 3110259R1 Light switches, parts NOTE: Some switches have a different appearance than the Order # IHS595 (6-volt) Price $46.50 IHS596 $46.50 (12-volt) IHS593 (6-volt) IHS594 $46.50 (12-volt) IHS602 $5.95 IHS600 $46.50 IHS601 $46.50 IHS598 $46.50 which is identical to originals. IHS579 Price $8.00 Description / Application Old-Style Knob (For Rotary Light Switches) fits: Cub, (A, AV & Supers), B, BN, (C, H, HV, M, MD, MV, MDV, & Supers), MTA series, (W4, W6 & Supers), W9, W6TA series, WD6, WD9, WR9, WDR9, O4, OS4, I4, I6, ID6, I9, ID9; Crawlers: T6, TD6, T9, TD9, TD14, TD14A, TD15 (150 series), TD18, TD18A, Replaces: 57313D NOTE: Interchanges w/ original equipment (O.E.M). IHS1636 $68.50 Rotary Light Switch (4-position) w/ Knob fits the following models w/ cutout relay on generator: A, B, C, H, M, O, W series; Also fits Cub w/ cut-out relay on governor housing Replaces: 57310DX, 57310DY Rotary Light Switch (3-position) w/ Old-Style Knob fits following models w/ voltage regulators: Cub, (A, AV & Supers), B, BN, (C, H, HV, M, MD, MV, MDV, & Supers), MTA series, (W4, W6 & Supers), W9, W6TA series, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, I6, ID6, I9, ID9 IHS595 Replaces: 1994038 IHS569 Replaces: 1994048, 1994050, 263691R92 USA made NOTE: For tractors w/ regulators, not cutouts and rear light with switch. $46.50 original switches, but once installed only the handle is visible Order # Description / Application Rotary Light Switch (4-position) w/ Old-Style Knob fits following models w/ voltage regulators: Cub, (A, AV & Supers), B, BN, (C, H, HV, M, MD, MV, MDV, & Supers), MTA series, (W4, W6 & Supers), W9, W6TA series, WD6, WD9, WR9, WDR9, O4, OS4, O6, OS6, I4, I6, ID6, I9, ID9 USA made NOTE: For tractors w/ regulators, not cutouts and with rear light without switch on light. New-Style Knob (For Rotary Light Switches) fits: Cub SN: 210001 & up, Cub LoBoy SN: 10001 & up thru 4386 Replaces: 1930685 NOTE: O.E.M manufacture, arrow design. OEM 6-volt Rotary Light Switch (3-position) fits following w/ 6-volt voltage regulator: 100, 130, 200, 230, 300 gas, 330, (350 gas up to SN: 13242), 400 gas, W400 gas, (450 gas up to SN: 11083) Replaces: 362111R91, 363130R91 USA made OEM 12-volt Rotary Light Switch (3-position) fits following w/ 12-volt & voltage regulator: 300 LP, 350 LP, diesel, (350 gas SN: 13243 & up), 400 LP, 450 LP, diesel, (450 gas SN: 11084 & up), 600, 650 Replaces: 363131R91 USA made OEM 6-volt Rotary Light Switch (4-position) fits the following w/ 6 volt systems: Cub SN: 210001 - 224000, Cub LoBoy SN: 10001 - 18700, 140 up to SN: 26800, 240, 340 gas, (T340 up to SN: 5395 gas), (T4, T5 6-volt), Replaces: 371464R91 USA made Light switches, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 273 Electrical parts IHS383 $39.95 Price Light switches, parts cont... IH/Farmall IH/Farmall Push / Pull 1 Screw Type Terminal Ignition Switch fits: Cub, A, B, C, H, M & Supers, I, O, T, W-4, 6, 9 series gas, diesel w/ Magneto ignition, Replaces: 54207DB IHS382 Order # Ignition / Key Switches cont... Push / Pull Switches IHS381 Starter parts cont... Light switches, parts cont... Light switches, parts cont... NOTE: Some switches have a different appearance than the original switches, but once installed only the handle is visible which is identical to originals. Order # IHS599 Price Order # IHS950 Price Description / Application Description / Application $46.50 IHS3234 $42.50 JDS631 274 IH/Farmall Lighting Switch Dimmer Resistor Fits: Cub, A, B, C, H, HV, M, MV & Supers, O4, OS4, O6, OS6, W4, Super W4, W6, Super W6, (WD6 w/ lighting only), W9, WR9, WR9S, 100, 130, 200, 230, 300, 330, 350, 400, W400, 450, W450 (All gas w/ 6-volt system) Replaces: 47889D, Delco 814545 NOTE: Fits switches for all 6-volt systems both w/ cut-outs & regulators. $12.50 Light Switch Dimmer Resister fits the following when using a 12-volt system: Cub, A, AV, Super A, Super AV, B, BN, C, Super C, H, HV, Super H, Super HV, M, MD, MV, MDV, Super M, Super MD, Super MV, Super MDV, MTA series, W4, W6, W9, Super W4, Super W6, W6TA series, WD6, WD9, WR9, WR9S, WDR9, O4, OS4, O6, OS6, I4, I6, ID6, I9, ID9, T6, TD6, T9, TD9, TD14A, TD15, TD18 IHS2432 $12.50 $44.95 OEM 12-volt Rotary Light Switch 4-Position fits: 544, 656, 664, 666, 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, 4166, 4366 Hydros: 70, 100, Replaces: 403571R1 USA made ABC398 IHS952 $8.20 $12.95 NEW! OEM 12-Volt Rotary Light Switch, 4 Position fits: 140 SN: 62472 & up w/ alternator, 384, 385, (464 SN: 109151 & up), 484, (574 SN: 104909 & up), 584, (674 SN: 108105 & up), 684, 686, 784, 786, 884, 886, 986, 1086, 1486, 1586, (2500 SN: 104909 & up), (3088 thru 3788), 4186, 4386, 4568, 4586, 4786, (5088 thru 7288), Hydro 84, Hydro 86, Hydro 186 Replaces: 107200C2 (6 spade terminals, 0.685" O.D. thread) USA made Universal 2-Position Push / Pull Light Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. Universal 3-Position Fused Push / Pull Starter & Light Switch fits: IH / Farmall models w/ voltage regulator NOTE: 15 AMP, five terminals, fused, 7/16-20 stem. 10-24 N.C. black plastic knob. JDS1030 $11.95 IHS351R (6-volt) Price $44.95 IHS351R12V $45.95 (12-volt) $52.50 6-volt Flatback Headlight Assembly Fits: Cub up to SN: 210000, Cub LoBoy up to SN: 10000, 100, 130, 200, 230, 300, 330, (350 up to SN: 13242), 400, (450 up to SN:11083), (W400, W450 both up to SN: 1350) (All gas); WR9S; Supers: A & C (both late 1951 & up), MTA, (W6 SN: 3951 & up), W6TA Replaces: 357884R91,92,93,94 (4-5/8") IHS463 $52.50 12-volt Flatback Headlight Assembly Fits: 300 LP, (350 SN: 13243 & up, gas, LP, diesel), 400 LP, diesel, (450 SN: 11084 & up, gas, LP, diesel), W400 diesel, (W450 SN: 1351 & up, gas, LP, diesel); Supers: MD, MDTA, (WD6 late 1951 & up), WD6TA, (WD9, WDR9 late 1951 & up) & tractors converted to 12-volt system, Replaces: 357885R91,92,93 (4-5/8") Light Switch Knob fits: Cub Cadets up to SN: 400000 (10 - 32 UNF) NOTE: Black metal. $34.50 Shift quadrant light, part Serviceable for 756, 766, 826, 856, 966, 1066, 1026, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 397946R1, 406127R1 (2-3/8" o/a length) Rear view ABC345 Description Order # Price 12-volt Shift Quadrant Light..............................IHS841..............$19.65 (For 1-1/4" Opening) IHS403 $34.50 Bulb only...............................................................ABC345.............$1.95 Dash light lens Fits: 460, 560, 660 Replaces: 371204R1 Rear view Description Order # Price Dash Lamp Lens.................................................. IHS900...............$19.95 NOTE: For light bulbs use (2) ABC356. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Complete Headlight Assembly Fits: Cub, A, B, C, H, M, Supers, I, O, T, W-4, 6, 9 series, TD-14, 14A Crawler, TD-18, 18A Crawler IHS351R Replaces: 45640DB IHS351R12V Replaces: 45640DB, 61225DB (4-3/4", Red) NOTE: See light chart A for subcomponents. IHS460 IHS402 IHS841 Description / Application 6-volt Sealed Beam Lamp w/ Guide Name fits: Cub up to SN: 210000, Cub LoBoy up to SN: 10000, Super A, Super C, Super H, Super M, MTA, 100, 130, 200, 230, 300, 330, (350 up to SN: 13242), 400, (450 up to SN: 11083), Super W4,(Super W6 SN: 3951 & up), Super W6TA, Super W6TA, Super W9, WR9S, W400 gas, W450 gas up to SN: 1350, Replaces: 358890R92 (4-5/8") 12-volt Sealed Beam Lamp w/ Guide Name fits: 300 LP, (350 SN: 13243 & up, gas, LP, diesel), 400 LP, diesel, (450 SN: 11084 & up, gas, LP, diesel), W400 diesel, (W450 SN: 1351 & up, gas, LP, diesel); Supers: MD, MDTA, (WD6 late 1951 & up), WD6TA, (WD9, WDR9 late 1951 & up) & tractors converted to 12-volt system, Replaces: 358893R92 (4-5/8") NOTE: Will only fit factory IH lights & IHS463 light. Will not fit IHS460 headlight assemblies. Order # Price Description / Application IHS461 (Ring) $12.95 IHS462 (Gasket) $4.95 JDS468 $45.95 6-volt Sealed Beam Headlight Assembly Serviceable for Cub SN: 210001 & up, Cub LoBoy SN: 10001 & up, 140 up to SN: 26800 (All w/ 6-volt system); Will also fit the following when ordering ABC460 Bulb to convert to 12-volt system: 140 SN: 26801 & up, F404, I404, I504 Replaces: 376849R91, 381181R91 (4-1/2", Black) NOTE: See light chart H for subcomponents. JDS676 $18.15 Clamp Ring w/ Screw (For Sealed Beam Lights) fits: Cub SN: 210001 & up, Cub LoBoy SN: 10001 & up, 140, 240, 340; Also fits as a tail light ring only for 460, 560, 660 Replaces: 371445R91, 371449R91, 371451R91 (4-1/2") FDS213 $63.95 12-volt Sealed Beam Healight Assembly Serviceable for F340, 404, 424, 444, 460, 504, 560, 606, IH 660, IH 2500, T340, TD340 (All w/ hood mounted head lights not grille mounted); 706, 806 (both w/ side mounted lights), Replaces: 377866R91 (5-3/4" sealed beam style) NOTE: Stamped "TRACT-O-LITE" on housing. IHS647 $34.95 Headlight Ring or Gasket Fits: Cub up to SN: 210000, Cub LoBoy up to SN: 10000, 100, 130, 200, 230, 300, 330, (350 up to SN: 13242), 400, (450 up to SN:11083), (W400, W450 both up to SN: 1350) (All gas); WR9S; Supers: A & C (both late 1951 & up), MTA, (W6 SN: 3951 & up), W6TA IHS461 Replaces: 358891R91 IHS462 Replaces: 358892R91 (4-5/8") NOTE: Fits IHS460 & IHS463 flatback lights. 12-volt Sealed Beam Headlight Assembly fits: 06, 56, 66 series (4-1/2") NOTE: Post is out of back w/ wires thru post. ABC3028 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $12.50 Rubber Light Bezel (For 'Hobbs' style light w/out glare guard) fits: Same as IHS647, Replaces: 676078R1 (5.250" O.D., 3.675" I.D., 1.125" wide 3 outer tabs to attach rubber ring to light housing & 4 inner tabs to secure to sealed beam) NOTE: See website for additional applications. Headlights, parts continue on next page 275 Electrical parts Electrical parts OEM 12-volt Rotary Light Switch (4-position) fits: Cub SN: 224401 & up, Cub LoBoy SN; 18701 & up, 140 SN: 26801 - 62471, 154, 184, 185, 354, 404, (T340 SN: 5396 & up), (TD340 SN: 5396 & up), 424, 2424, 444, 2444, 454, 464, 504, (574 up to SN: 104908), 606, (674 up to SN: 108105), 706, 806 1206, 2300A, 2400A, (2500A up to SN: 104908), 3414, 3444, 3514, 3600, 3616, 3800, 3850, 4100, 4156, Replaces: 376851R91, R92 USA made Order # IH/Farmall IHS786 $39.95 Headlights, parts cont... Need light components? See pgs. 277 & 278 Light Switch Field Resistor fits: Cub, A, AV, (Super A equipped w/ generator relay), C up to SN: 47125, (H, HV up to SN: 340953), M, MV w/ magneto ignition, O4, OS4, O6, OS6, W4, W6, (WD6 w/ Delco lighting), W9 w/ magneto ignition, (WD9 w/ Delco lighting) & WR9 (All w/ cut-out on generator), Replaces: 47891D, Delco 1878070 $14.50 OEM 12-volt Rotary Light Switch (4-position) fits the following w/ 12 volt system: 340 diesel, 500 Crawler, I460, F460, 560, 660, (T4, T5 12-volt), TD5 Replaces: 371465R91 USA made IHS788 Headlights, parts Headlights, parts cont... Headlights, parts cont... Order # Need light components? See pgs. 277 & 278 Order # ABC3035 ABC527 Price Description / Application $24.50 NEW! Rubber Light Bezel (For 'Hobbs' Late style w/ glare guard) Fits: Tractors w/ 'Hobbs' round lights & 5.250" O.D. bezel when extended glare guard bezel is desired Replaces: 676078R1 (5.250" O.D., 3.675" I.D., 2.430" wide, 3 outer tabs & 4 inner tabs) NOTE: Will fit IHS647 light. Available Spring 2016! Price Description / Application IHS2447 (LH) $83.75 IHS2450 (RH) $83.75 Rear Light Panel fits: 786, 886, 986, 1086, 1486, 1586, 3088, 3288, 3388, 3488, 3588, 3688, 3788, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488, Hydro 186 (All w/ rops, non-rops or cab) IHS2447 Replaces: 111562C1, 111562C2 IHS2450 Replaces: 111563C1, 111563C2 NOTE: Fiberglass. Parts are gel coated with a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. Customer must drill holes to retain to tractor. $4.95 Concaved Mounting Washer Fits: Same as IHS647 (2-1/4" O.D., 9/16" center hole) ABC353 $8.50 ABC460 $16.50 Electrical parts IH/Farmall (Lo Beam) (Hi Beam) 12-volt Sealed Beam Lamp Fits: Same as IHS647 ABC353 Replaces: 4111, 373662R91 ABC460 Replaces: 4110 ABC344 ACS123 Rear view IHS1932 (LH) OLS071 $53.50 OLS072 IHS1934 (RH) IHS2455 (LH) IHS2460 (RH) 276 $53.50 Front Lower Light Panel Fits: 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788, Hydro 186 (All w/ cab & w/out front cab lights) IHS1932 Replaces: 117746C1, C2 IHS1934 Replaces: 117747C1, C2 Piggy back tail light components Fits: Cub, Cub LoBoy, A, AV, Super A, Super A1, Super AV, Super AV1, C,Super C, H, HV, Super H, Super HV, M, Super M, MD, Super MD, MV, MDV, Super MV, Super MDV, I4, I6, I9, ID6, ID9,O4, OS-4, O6, OS-6, ODS-6, W4, W6, WD6, W9, WD-9, WR-9, WDR-9, WR-9S ABC344 Replaces: 142303, Bulb #63 ACS123 Replaces: 354308R1 OLS071 Replaces: 354307R92 OLS072 Replaces: 92111H Description Order # Price 6-volt Bulb, Single contact..................................ABC344............. $1.80 Red Glass Tail Light Lens (2-1/8" O.D.)...........ACS123............. $14.95 Tail Light Trim Ring............................................OLS071............. $9.95 Tail Light Gasket USA made.............................OLS072............. $2.00 Tail lights, parts $194.95 Need light components? See pgs. 277 & 278 Front Lower Light Panel Fits: 3088, 3288, 3488, 3688, 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488 (All w/ cab) IHS2455 Replaces: 143172C3 IHS2460 Replaces: 143173C3 $194.95 NOTE: Fiberglass. Parts are gel coated with a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. Order # Price IHS473 (6-volt) $69.95 IHS455 (12-volt) $69.95 Description / Application Combo Tail Light Assembly w/ Red Jewel Lens & Rotary Switch Fits: Cub, Cub LoBoy, A, B, C, H, M & Supers, I, W-4, 6, 9 series, 100 thru 650,T4, T5, TD5, Miscellaneous Combines, Windrowers IHS473 Replaces: 373305R91 IHS455 Replaces: 373306R91 (4-3/4") NOTE: See light chart A for subcomponents. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Tail lights, parts cont... Order # IHS899 Price $19.95 Rear view ABC544 $27.00 Description / Application Order # 12-volt Sealed Beam Combination Rear Light Lamp w/ transparent red background using separate bulb (For Light 377102R92) fits: Cub, Cub LoBoy 154, 184, 185, 140 SN: 26801 & up, 340, 354, 364, 384, 404, 424, 444, 454, 460, 504, 544, 560, 574, 606, 656, 660, 666,674, 686, 706 thru 1586, 4366 thru 4786, Hydro 86 thru Hydro 186 (All w/ 12-volt systems) Replaces: 371461R92 (4-1/2") 12-volt Fender & Cab Warning Light w/ 2 amber lenses, double contact bulb & black die cast base Serviceable for 140 thru 4186 (All using round warning light) Replaces: 394129R91, 531627R91, 3123675R92, 199954A1, 67538C92 (4" lens dia) ABC1243 Price Description / Application $4.95 Amber Lens only (For ABC546) ABC548 $9.95 ABC1439 $3.45 FDS172 $44.50 6-volt Bulb only (Double contact) (For ABC544 & ABC548) 12-volt Tail Light Assembly w/ Bulb Serviceable for Cub LoBoy SN: 10001 & up,140, 154, 240, 340, 404, F856 Lawn & Garden: Cub Cadet 70, 71, 72, 102,122, 123 (All up to SN: 400000) Replaces: 370306R91, 370716R91, 371368R91, 376850R91 NOTE: May have to 'slot' mounting holes for some applications. Economy style. See light chart F for subcomponents. Light subcomponents Need just a lens, bulb or gasket? This is the place for you. For application information see the light assemblies on the previous pages or go to www.SteinerTractor.com IHS475 IHS352 ABC388 IHS353R ABC560 IHS355 IHS354 IHS436 ABC320 ABC378 IHS474 ABC1115 ABC342 ABC343 Light chart A The light subcomponents below fit IHS351R, IHS351R12V, IHS455, IHS473: IHS475 $6.00 Light Terminal IHS352 $14.80 Lens (Dimpled outer surface) w/ Guide name ABC388 $14.80 Lens (Smooth outer surface) w/ Guide name IHS353R $14.50 Red Ring (Bezel) ABC560 $4.25 Seamless Gasket IHS355 $3.95 Gasket IHS354 $3.00 6-volt Bulb IHS436 $2.95 12-volt Bulb ABC320 $11.50 Reflector (For Head & Work lights) ABC378 $19.95 Reflector (For Tail lights w/ Red Jewel Lens & 12-v Bulb in Jewel Lens) IHS474 $14.95 Jewel Lens w/ Base & 6-volt Bulb ABC1115 $14.95 Jewel Lens w/ Base & 12-volt Bulb ABC342 $1.80 6-volt Light Bulb (For 6-volt Jewel Lens) ABC343 $1.95 12-volt Light Bulb (For 12-volt Jewel Lens) Light subcomponents continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 277 Electrical parts 12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulbs & black ABS base Serviceable for 766 & up (All using rectangular warning light) Replaces: 537328R91 12-volt Round Red Tail Light Assembly w/ License Lamp Window, red lens & black ABS base fits: 100 thru 1256, Cub Cadet 70 thru 123, Replaces: 45645HA, 121846C91, 370306R91,370716R91, 376850R91, 379789R91, 404418R1, 967696R92 (4" dia.; 2 stud mount, 1-7/8"c.c. studs) NOTE: May have to 'slot' mounting holes for some applications. IH/Farmall ABC546 $17.15 Tail lights, parts cont... Light chart A cont... Hood ornaments The light subcomponents below fit IHS351R, IHS351R12V, IHS455, IHS473: IHS918 IHS590 IHS942 IHS918 $18.50 Combo Light Switch w/ Round Knob IHS590 $6.99 Round Plastic Knob IHS942 $8.25 Round Knurled Steel Knob USA made Order # Price Application IHS2300 $19.95 Fits: Cub SN: 210001 - 248124, Cub LoBoy SN: 10001 & up, Cub LoBoys 154, 184 & 185 (mounts on radiator cap); Following Cub Cadets all up to SN: 399999: 70, 71, 72, 73, 100, 102, 104, 105, 122, 123, 124, 125 Replaces: 392718R1 NOTE: Chromed metal. Light chart H The light components below fits JDS468: JDS676 Rear view ABC352 ABC462 ABC353 ABC460 Rear view JDS676 $18.15 Clamp Ring w/ Screw (For Sealed Beam Lights) ABC352 $8.50 6-volt Sealed Lo-Beam Lamp 4511 ABC353 $8.50 12-volt Sealed Lo-Beam Lamp 4411 ABC462 $16.50 6-volt Sealed Hi-Beam Lamp 4510 ABC460 $16.50 12-volt Sealed Hi-Beam Lamp 4410 IHS733 $59.95 Light chart F FDS454 ABC456 ABC1439 $14.95 Glass Tail Light Lens USA made FDS454GK $9.95 Tail Light Lens Gasket Set USA made FDS456 $14.95 Stainless Steel Ring (Bezel) ABC1439 $3.45 6-volt Bulb, Double contact ABC344 $1.80 6-volt Bulb, Single contact ABC345 $1.95 12-volt Bulb, Single contact Light parts Order # IHS464 Price $7.90 Description / Application Order # Light Clamps (For Front & Rear Lights) Fits: Cub, Cub LoBoy, C, H, M & Supers, I, O, W-4, 6, 9 series gas, diesel, 100 thru 650 Replaces: 350920R1 NOTE: Powder coat red. $8.50 Light Clamps (For Front & Rear Lights) Fits: Cub, Cub LoBoy, C, H, M & Supers, I, O, W-4, 6, 9 series gas, diesel, 100 thru 650 Replaces: 6780D NOTE: Cast iron. IHS557 $13.50 EACH Front Light Bracket Assembly (Post, Nut & Washer) fits: Cub, Cub LoBoy Replaces: 351341R1 (post), 114507 (nut), 703325 (washer) NOTE: 2 required per tractor; Sold individually. IHS415 278 IHS734 IHS735 IHS565 Price $3.15 $49.95 $11.00 $9.50 IHS185 $27.85 Front Emblem (McCORMICK) Fits: W4, W6, W9 (1948 & up), O4, OS4, O6, OS6, ODS6, Replaces: 355156R1 (12-1/8" L x 2-1/8" H) NOTE: Not painted. IHS2032 $0.95 Stainless Steel Emblem Mounting Screw Kit w/ (2) countersunk slotted flathead screws fits: A, B, H, I4 thru ID9, M, MD, O4 thru ODS6, W4 thru WDR9 series Replaces: 350516R1, 141888 NOTE: Stainless finish. IHS205 $16.00 $9.95 $19.95 Fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566, 1568, 786, 886, 986, 1086, 1486, 1586, 4366, 4386, 4568, 4586, 4786; Hydros: 70, 86, 100, 186, Replaces: 538005R1 NOTE: Includes retaining clips. LH Front Light Bracket (Forged) Fits: A, Super A, B, BN, 100, 130, 140 series Replaces: 49394D NOTE: Use IHS414 for LH & RH sides when ordering for B & BN. RH Front Light Bracket (Forged) Fits: A, Super A, 100, 130, 140 series Replaces: 49393D NOTE: Also works for rear, fitting the B & BN along with the A - 140 series. Set Screw & Nut fits: A, Super A, B, BN, 100, 130, 140 series, Replaces: 102896, 218438 IHS069 $15.50 IHS2012 $0.95 Rear Light Bracket Assembly (Post, Bracket, Set Screw & Nut) fits: A, B, BN Replaces: 49393D (post), 6813D (bracket), 102896 (set screw), 218438 (hex jam nut) IHS206 $30.00 Front Emblem (FARMALL) fits: A, AV, B, BN, Replaces: 43658D (10-1/8" L x 1-11/16" H) USA made NOTE: Polished aluminum w/ black background. Rear Light Bracket fits: H, M, MTA, Supers Replaces: 353642R11 USA made NOTE: Bare steel finish. IHS3313 IHS271 $20.55 Front Emblem (INTERNATIONAL) Fits: Farmall A Industrial & Exported Replaces: 54208D (10-1/8" L x 1-11/16" H) USA made NOTE: Not painted. IHS232 IHS261 $22.50 Front emblems Order # Price IHS294 $29.95 $24.95 NEW! Rear Tail Light Bracket Fits: 230, F300, F350, F400, F450 Replaces: 361995R12 (4-1/2" o/a length) USA made IHS161 IHS207 $34.95 $48.75 $74.50 Light Bar only fits: H, M, Supers Replaces: 51675DC USA made IHS535 $13.95 IHS194 U-Bolt Set only fits: H, M, MD, MTA, Supers, Replaces: 59468D NOTE: IHS535 mounts headlight bar to steering column. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $34.95 Description / Application Front Emblem (IH Block) fits: Cub SN: 185001 - 222500, Cub LoBoy SN: 10000 17200, Replaces: 362387R1 (2-9/16" W x 3" H) NOTE: Chrome plated w/ black background, die-cast. Includes retaining clips Description / Application Front Emblem (IH Logo) fits: C, Super A, Super C, Replaces: 352580R1 (2" W x 2-3/16" H) Description / Application $26.50 $19.95 Rear Tail Light Bracket fits: Cub, Cub LoBoy, Replaces: 352121R11 USA made IHS414 IHS1794 (Die cast) Front Emblem (McCORMICK DEERING) Fits: W4, W6, W9 (up to 1947) Replaces: 56598D (12-1/8" L x 2-1/8" H) NOTE: Not painted. Light parts cont... IHS992 IHS495 IHS742 (Plastic) Price $27.85 Front Emblem (FARMALL) fits: H, HV, M, MD, MV, MDV, Replaces: 49404D (12-1/8" L x 2-1/8" H) NOTE: Polished aluminum w/ black background. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Front Emblem (IH Logo) fits: Super H, Super HV, Super M, Super MV, Super MTA, Super W4, Super W6, Super W6TA, Super WD6, Super W6TA diesel, Super WD9, Super WDR9, WR9S Replaces: 357650R1 (2-5/6" W x 2-7/8" H) Stainless Steel Emblem Mounting Screw Kit w/ (2) countersunk slotted flathead screws fits: Super A, C, Super C, Super H, Super M, MTA, Super W4, Super W6, Super W9 diesel series Replaces: 352581R1 NOTE: Stainless finish. Use with IHS069, IHS205. Front Emblem (IH Block) fits: 100, 130, 200, 230, Replaces: 362513R1 (3" W x 3-1/2" H) NOTE: Chrome plated w/ red background, die-cast. Includes retaining clips. Front Emblem (IH Block) fits: 300, 330, 350 Row-Crop & Utility, Replaces: 362397R2, 365371R1 (3" W x 3-1/2" H) NOTE: Stainless w/ red background. Includes retaining clips. Front Emblem (IH Block) fits: 400, 450, W400, W450, Replaces: 362320R2 (3-3/4" W x 4-1/4" H) NOTE: Stainless w/ red background. Includes retaining clips. Front emblems continue on next page 279 Chassis parts Electrical parts ABC344 ABC345 FDS454 Fits: Some Cub Cadet tractors; All Farmall 240, 340, 404, 444, 460, 504, 544, 560, 606, 656, 660, 664, 706, 756, 826, 2404, 2444, 2504, 2544 Crawlers: T4, T5, TD5 Replaces: 369180R1 NOTE: Chrome plated, die-cast. Includes mounting screws. Order # IHS186 IH/Farmall IH/Farmall FDS454GK The light components below fits FDS172: Front emblems cont... Front emblems cont... Order # IHS745 (Chrome Price $39.95 Plated; Die Cast) IHS835 (Plastic) IHS747 (Chrome $15.85 Front emblems cont... Description / Application Order # Front / Cab Emblem fits: Cub SN: 222501 & up, Cub LoBoy SN: 17201 & up, Cub Cadets up to SN: 400000, 140, 154, 184, 185, 240, 340, 404, 424, 434, 444, 460, 504, 544, 560, 606, 660, 666, 686, 766; Early: 786, 886, 966, 986, 1066, 1086, 1466, 1486, 1566, 1568, 1586, 2400A, 2500A, 2544; Crawlers: T4, T5, TD5; Hydros: 70, 86, 100, 186; For Cab only: 656, 756, 856, 1256 IHS745 Replaces: 368523R4 IHS835 Replaces: 2751846R1 (2-13/16" W x 3-3/8" H) NOTE: Includes mounting screws. $39.95 IHS677 IH/Farmall $14.95 (Chrome Order # Price IHS409 $99.95 EACH Side Emblem (FARMALL CUB) fits: Cub SN: 185001 - 210000, Replaces: 362386R2 (16" long) USA made NOTE: Stainless steel. Sold individually. IHS305 $48.95 EACH Side Emblem (INTERNATIONAL CUB) Fits: Cub LoBoy SN: 501 - 10000 Replaces: 364044R1 (16" long) NOTE: Stainless steel. Retaining clips are included. Sold individually. IHS411 $49.95 EACH IHS513 $49.30 EACH Side Emblem (FARMALL) fits: 100, 130, 200, 230, Replaces: 389507R9, 362512R2 (1-1/4" H x 16" L) NOTE: Stainless steel. Sold individually. IHS290 $49.95 EACH IHS291 $49.95 EACH Die Cast) (Plastic) IHS833 ABC374 280 $15.95 $24.50 $0.25 EACH Front Emblem fits: 284, 384, 385, 433, 484, 485, 584, 585, 674, 684, 685, 784, 785, Late 786, 884, 885, Late 886, Late 986, Late 1086, Late 1486, Late 1586, 3388, 3588, 3788; Hydros 84, 186; Industrial: 2400A Replaces: 120397C1 (3-1/4" W x 3-1/2" H) NOTE: Plastic w/ silver sides. Mounting holes not exposed. Includes mounting screws. Emblem Push Clip (For IHS206, IHS271, IHS261 Front Emblems) (Center hole dia. = 0.180" & will expand to 0.300) NOTE: Push Clips are included w/ the listed emblems. Sold individually. Vertical Side Emblem (LoBoy) Fits: IH Cub LoBoy up to SN: 10000; Farmall Cub LoBoy SN: 185001 - 210000 Replaces: 364045R1 (1" W x 5-7/8" L) NOTE: Stainless steel. Sold individually. Side Emblem (McCORMICK) Fits: Cub SN: 185001 - 210000, Cub LoBoy up to SN: 10000; 100, 130, 200, 230 Replaces: 362389R1 (1/2" H x 5-7/8" L) NOTE: Stainless steel. Sold individually. Plated; IHS749 $49.30 EACH Description / Application $37.50 EACH $39.95 Front Emblem fits: 756, 806, 826, 856, 1026, 1206, 1256, 1456 (Cab & Grille) IHS784 Replaces: 2751809R1 IHS749 Replaces: 2751847R1 (3-5/8" W x 4" H) NOTE: Exposed mounting holes. Includes mounting screws. IHS511 NOTE: Includes mounting hardware. Sold individually IHS408 IHS784 Price $34.95 EACH IHS292 $49.95 EACH IHS293 $49.95 EACH Side Emblem (100), Replaces: 362509R1 (3-1/2" W x 1-7/8" H, 2-11/16" c.c) USA made NOTE: Stainless steel. Sold individually. Side Emblem (130), Replaces: 366721R1 (3-1/2" W x 1-7/8" H, 2-11/16" c.c.) USA made NOTE: Stainless steel. Sold individually. Side Emblem (200), Replaces: 362515R1 (3-1/2" W x 1-7/8" H, 2-11/16" c.c.) USA made NOTE: Stainless steel. Sold individually. Side Emblem (230), Replaces: 366723R1 (3-1/2" W x 1-7/8" H, 2-11/16" c.c.) USA made NOTE: Stainless steel. Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS512 IHS375 IHS373 IHS361 $59.95 EACH $35.75 EACH $35.75 EACH Description / Application Order # Price IHS718 $44.50 EACH IHS741 $79.95 EACH Side Emblem w/ Mounting Hardware Fits: 460, 560, Replaces: 369117R1 NOTE: Sold individually. IHS743 $79.95 EACH Side Emblem w/ Mounting Hardware Fits: 504, 656, 706, 806, 1206 Replaces: 377796R1 (2-5/8" wide, 30-1/2" long) NOTE: Sold individually. IHS767 Side Emblem (300) (For Row Crop models only), Replaces: 362396R1 (6" W x 3-1/8" H, 4 1/2" c.c) NOTE: Stainless steel. Sold individually. $85.00 EACH Side Emblem w/ Mounting Hardware Fits: 756, 826, 856, 1026, 1256, 1456 Replaces: 2753920R1 NOTE: Sold individually. IHS720 $42.95 EACH Side Emblem (350) (For Row Crop models only), Replaces: 366679R1 (6" W x 3-1/8" H, 4 1/2" c.c) NOTE: Stainless steel. Sold individually. IHS722 $42.95 EACH Side Emblem fits: 706 diesel Replaces: 381555R1 NOTE: Aluminum w/ black background & creme numbers. Sold individually IHS724 $42.95 EACH Side Emblem fits: 806 gas Replaces: 381557R1 NOTE: Aluminum w/ black background & creme numbers. Sold individually. IHS726 $42.95 EACH Side Emblem fits: 806 diesel Replaces: 381558R1 NOTE: Aluminum w/ black background & creme numbers. Sold individually. Side Emblem fits: 1206 Replaces: 2752935R1 USA made NOTE: Anodized aluminum. Made from original tooling. Sold individually. Side (Oval) Emblem fits: 140 Replaces: 369084R1 NOTE: Aluminum. Sold individually. Side Emblem (McCORMICK) Fits: 300, 350, 400, 450 (All Row-Crops) Replaces: 362317R1 (3/4" H x 9-1/2" L) NOTE: Stainless steel. Sold individually. Side Emblem (FARMALL) Fits: 300, 350, 400, 450 (All Row-Crops) Replaces: 362315R2 (2-1/8" H x 26" L) NOTE: Stainless steel. Sold individually. $24.95 EACH Side Emblem (400) (For Row Crop, Wheatland models), Replaces: 362314R1 (6" W x 3-1/8" H, 4 7/8" c.c) NOTE: Stainless steel. Sold individually. IHS362 $24.95 EACH Side Emblem (450) (For Row Crop, Wheatland models), Replaces: 366680R1 (6" W x 3-1/8" H, 4 7/8" c.c) NOTE: Stainless steel. Sold individually. IHS698 $28.50 EACH Side Emblem (TORQUE AMPLIFIER) Fits: Super MTA, 300, 330, 350, 400, W400, 450, W450, Replaces: 362394R1 NOTE: Sold individually. IHS783 $98.50 EACH IHS712 $42.95 EACH Side (Oval) Emblem fits: 460 Row Crop gas, Replaces: 369119R1 NOTE: Sold individually. JDS630 $0.50 EACH Side (Oval) Emblem fits: 460 Row Crop diesel, Replaces: 369121R1 NOTE: Sold individually. ABC373 $0.25 EACH IHS677 $1.00 EACH IHS714 $42.95 EACH IHS716 $44.50 EACH Side (Oval) Emblem fits: 560 gas Replaces: 369127R1 NOTE: Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Side (Oval) Emblem fits: 560 diesel Replaces: 369129R1 NOTE: Sold individually Side Emblem fits: 706 gas Replaces: 381554R1 NOTE: Aluminum w/ black background & creme numbers. Sold individually. Emblem Push Clip (For most side emblems up to 1958 w/ .125" dia. pegs) Replaces: 363784R1 USA made Emblem Push Clip (For pegs up to .125" dia.) fits: IH / Farmall models (Center hole dia. = 0.100" & will expand to 0.150") NOTE: Push clips are included w/ the emblems. Emblem Tubular Clip (For pegs w/ .195" dia.) fits: Some IH models (1958 & up) Replaces: 370786R1 281 Chassis parts Chassis parts (Plastic) Emblem Tubular Clip (For pegs w/ .195" dia.) fits: Some IH models (1958 & up) Replaces: 370786R1 Order # IHS591 Side emblems cont... IH/Farmall IHS837 Front Emblem fits: 544, 656, 664, 706; For Cab only: 4100, 4156, 4166, 4186, 4366, 4386 IHS747 Replaces: 2751845R1 IHS837 Replaces: 2751848R1 (3-5/8" W x 4" H) NOTE: (2) Mounting holes not exposed. Includes mounting screws. Description / Application Side emblems Plated; Die Cast) Price $1.00 EACH Side emblems cont... Serial number tags - USA made cont... Serial number tags - USA made • Blank w/ rivets. Order # • You stamp your serial number. IHS762 $24.95 IHS764 $24.95 IHS757 $24.95 IHS289A $18.95 IHS289B $18.95 IHS289AFC $18.95 IHS289BFC IHS2087 ABC464 ABC1585 IHS1595 282 $18.95 $18.95 $0.29 $0.50 $19.95 Description / Application Description / Application Order # Price Description / Application $19.95 Serial Number Tag w/ Rivets Fits: 154, 544, 656, 666, 686, 756, 826, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 70; Will also fit 86, 88 series but font is larger; Also fits as a cab serial number tag for 86 series (1-5/8" x 3-1/2") IHS3195 $52.50 NEW! Starter Hand Crank w/ Pin & Spinner fits: C, Super C, 200, 230, 240, 340, 404, 504 (Farmall Rowcrops only w/ wide front axle), Replaces: 352496R93; 15204D (pin) (20" to first bend) NOTE: Will not fit utilities. ABC2675 $0.25 Rivet only (For Serial Number Tags) Fits: 154, Hydro 70, 504, 544, 656, 666, 686, 706, 756, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1568 (#2 x 3/8", .100 shank dia.) NOTE: Steel. Sold individually. IHS546 $64.50 Starter Hand Crank w/ Spinner Fits the following w/ Tricycle front only: H, M, Supers, F300, F350, F400, F450 gas, LP, Replaces: 51544DBX (17" to first bend, 7/8" dia.) NOTE: Will not fit diesels. Serial Number Tag w/ Rivets Fits: F12, F14, F20, F30, W30, W40 (2-15/16" x 6-1/8) Serial Number Tag w/ Rivets Fits: 10-20 (2-15/16" x 6-1/8) Serial Number Tag w/ Rivets Fits: 15-30 (2-15/16" x 6-1/8) Hand crank brackets Serial Number Tag w/ Rivets Fits: Cub, A, B, C, H, M (Early style 1939-49) (2-1/4" x 4) Order # Price IHS2018 $6.25 Serial Number Tag w/ Rivets Fits: Cub, C, H, M, Supers; Serviceable for W6 (Later style 1950 approximately 1955) (2-1/4" x 4) Serial Number Tag w/ Rivets Fits: C (goes on seat base) (Early style 1948-49) (2-1/4" x 4) NOTE: The "FC" is already printed. Serial Number Tag w/ Rivets Fits: C (goes on seat base) (Later style 1950 & up) (2-1/4" x 4) NOTE: The "FC" is already printed. Serial Number Tag w/ Rivets fits: Cub, Cub LoBoy (except 154, 184, 185), 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424 (thru 1964), 450, 460, 504 (thru 1964), 560, 600, 606 (thru 1964), 650, (656 thru 1967), 660, T340, TD340, Super W9, Super WD9, Super WDR9, WR9S, W400, W450 (1956 & up) (2-1/4" tall x 4" long) Rivet only (For Serial Number Tags) (6 x 3/8", .135" shank O.D.) NOTE: Steel. Sold individually. IHS404 Serial Number Tag w/ Rivets Fits: Some 504, 706, 756, 806, 826, 856, 1206, 1256 (1-5/8" x 3-1/2") Hand Crank Bracket w/ Screw fits: Cub, Cub LoBoy, Replaces: 351013R1, 171573 (screw) (0.218" O.D. mounting holes) USA made NOTE: Bolts to foot platform by gear shift lever. 2 used per tractor; Sold individually. Bare finish. Front grilles, parts Order # Price IHS543 IHS401 IHS545 Price $45.00 $29.50 $49.50 $49.50 IHS197 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $96.45 Description / Application Dash Support & Grille Truss Head Screw Fits Grille: Farmall Cub up to SN: 222500, Cub LoBoy up to SN: 17200; Fits Dash Support: Farmall Cub (1947-64), International Cub (1964-79), Cub LoBoy (1955-68), Replaces: 144531, 85700996 NOTE: Stainless. 4 used for grille, 4 used for dash support; Sold individually. Front Grille Screen (Mesh) Fits: All round, red Cubs up to SN: 185000 (1947-53), Replaces: 350979R11 USA made NOTE: New & improved fit! IHS680 $224.95 Front Bar Grille w/ Screen fits: Cub SN: 185001 - 210000; International Cub LoBoy up to SN: 10000, Replaces: 362372R11 $53.10 Lower Grille Insert w/ Screen Fits: H, HV, Super H, Super HV Replaces: 48963DXA IHS1611 $218.00 Fiberglass Grille Cowling fits: 154, 185 Replaces: 404686R1 NOTE: Primer only. Wet sand w/ fine paper prior to painting. $53.10 Lower Grille Insert w/ Screen Fits: M, MD, MTA & Supers Replaces: 50204DXA IHS2662 $79.95 NOTE: For best results fit lower grille inserts w/ screen to Mesh Grill Insert fits: 154, 185 Replaces: 106742C1, 533556R1 tractor before painting. IHS345 $48.50 Starter Hand Crank w/ Pin & w/out Spinner fits: Cub, Cub LoBoy (13-1/4" to first bend) Starter Hand Crank w/ Pin & Spinner Fits: Super A w/ 123 engine, 100, 130; The following w/ Tricycle front only: Super C, 200, 230, 240, 340, 404, 504 Replaces: 357750R11; 15204D (pin) (16-3/4" to first bend, 3/4" dia.) IHS073 3) USA MADE! Description / Application Starter Hand Crank w/ Pin & Spinner Fits: A, Super A w/ 113 engine, B; The following w/ Tricycle front only: C, 200, 230, 340, 404, 504, Replaces: 47961DBX, 53385DBX; 15204D (pin) (12-3/4" to first bend, 3/4" dia.) $0.50 2) Have correct wire screen! Hand Crank Mounting Bracket Fits: A, Super A, AV, Super AV, B, BN, 100, 130, 140, Replaces: 350639R91 Starter Hand Crank w/ Pin & Spinner Fits: Cub, Cub LoBoy Replaces: 351010R31, 351011R1 (pin) (13-1/4" to first bend, 5/8" dia.) IHS953 1) Have correct angle for a perfect fit! Starter hand cranks - USA made Order # Description / Application Price What makes our IHS197 & IHS198 the best on the market? IHS198 IHS544 Rivet only (For Serial Number Tags) (.347" o/a length, .225" head dia., .255" useable shank length, .126" shank dia.) NOTE: Brass. Sold individually. Customer may need to drill the tag for the rivet. $18.50 Description / Application Order # IHS208 Grille Repair Patch fits: M, MD, MTA, Supers USA made NOTE: Exact reproduction of lower bar. Not factory as separate piece which is usually damaged. The damaged grille bar must be cut out & IHS345 must be welded on, which goes BELOW grille insert (IHS198). $218.00 Fiberglass Grille Cowling fits: 184 Replaces: 132247C1 NOTE: Primer only. Wet sand w/ fine paper prior to painting. $27.95 Wire Grille Screen (2' x 3') fits: Cub, A, B, C, H, M & Supers, W4, 6, 9, others NOTE: 5 squares per inch. MIS100 IHS2436 $6.00 IHS2668 $79.95 Mesh Grille Insert fits: 184 Replaces: 132263C1 Wire Screen Clips (Package of 6) (For IHS208) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Front grilles, parts continue on next page 283 Chassis parts Chassis parts Price Price IHS1589 Front grilles, parts cont... IH/Farmall IH/Farmall Order # Starter hand cranks - USA made cont... Front grilles, parts cont... Order # IHS310 Price Front grilles, parts cont... Description / Application Order # $399.95 IHS702 Price Front Grille w/ Black Metal Screen Insert (For tractors w/ grille mounted lights) Fits: 354, 364, 454, 464, 574, 674 Industrials: 2300A, 2400A, 2500A Replaces: 537496R1 (20" tall x 16-1/4" wide) NOTE: Plastic. $234.75 Front Radiator Grille Insert w/ Screen (Steel) fits: 100, 130, 200, 230 Replaces: 362592R11 USA made IHS1572 IHS1110 IHS872 IHS1273 IHS3254 284 $3.75 $34.95 Grille Screen Spring fits: 404, 504, 606, 706, 756, 2404, 2504, 2606,2706, 2756; Cub Cadets: 72, 73, 104, 105,106, 107, 124, 125, 126, 127, 147 (All up to SN: 400000) Replaces: 391347R1 Lower Grille Shell Panel fits: 574, 674, 2500A series, Replaces: 402427R1 (6-9/16" tall x 16-7/16" long) USA made NOTE: Primed gray. IHS604 (Plastic) $155.65 Lower Grille Support Housing fits following w/ cast iron or fabricated steel bolster w/ 4 side mounting holes: IH 484, IH 485 both w/ 2 wheel drive; Some 584, 684,784, 884; 585, 685, 785, 885 (All w/ 4 wheel drive and up to 1985) Replaces: 3121231R1 (20-1/2" wide x 19 3/4" tall) USA made NOTE: Parts are gel coated with a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. Measure before ordering. $98.50 NEW! Front Lower Bar Grille fits: Some IH 384, 385, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885, Hydro 84 Replaces: 3121672R1 (7-1/4" tall, 18" wide) NOTE: Measure before ordering as there was more than one grille used for most applications. It fits our IHS1273 grille housing. For tractors w/ headlights that are separate from the grille. Fit to tractor BEFORE painting. Does not fit Case IH tractors. IHS610 (Steel) $154.50 Front Grille fits: 666, 686, Hydro 70, Hydro 86, Replaces: 65491C1 (19-3/4" wide, 19-1/16" tall) USA made NOTE: Silver painted steel. Must drill (2) 3/8" holes in existing casting to retain top of grille. Front Grille fits: 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 100, Hydro 186 IHS604 Replaces: 531231R1 (22-5/8" wide x 22-7/16" tall) USA made $193.25 NOTE: Gray plastic. $58.50 Screen only fits: Same as IHS604 Replaces: 531233R2 (7 holes per inch) USA made IHS970 IHS376 $238.50 Order # Price IHS319 $59.85 $99.95 Headlight Support Panel (Upper Grille) Fits: Same as IHS604 Replaces: 71780C1, 531217R1 (27" wide x 9-5/8" tall) NOTE: Silver & black plastic. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Hood Hardware Kit fits: A, B, C & Supers, 100, 130, 140, 200, 230, Replaces: 58146D (LH), 58147D (RH) USA made NOTE: Kit includes: (2) LH j-hooks, (2) RH j-hooks, (4) springs, (4) cotter pins & (4) washers. Description / Application Hood & Sheet Metal Retaining Shoulder Bolt fits: 544, 656, 666, 686, 706 thru 1586 Hydros: 70 thru 100, Replaces: 373483R1 (5/16"-18 NC x 11/16" length, shoulder bolt w/ 9/16" hex head) USA made NOTE: Sold individually. IHS2041 $0.75 Hood and Side Panel Washer fits: 766 1568, 786 - 1586, 1026; Hydros: 100, 186 (All using IHS973 bolt), Replaces: 536653R1 (1/4"-20 NC thread, 1.315" o/a length) NOTE: Made of rubber. IHS1245 $4.45 Hood & Sheet Metal Bolt w/ Washer Fits: 544, 656, 666, 686, 706 thru 1206, 756 thru 1456, 826, 1026; Hydros: 70, 86 Replaces: 389427R91 (5/16"-18 NC x 3/4") USA made NOTE: Sold individually. IHS1365 $3.70 Hood & Sheet Metal Bolt fits: 544 thru 686, 706 thru 1456, 766 thru 1586; Hydros: 70, 86, 100, 186, Replaces: 385157R1 (5/16"-18 NC x 5/8" flanged hex head) USA made NOTE: Has recess in center of hex head w/ correct finish. Sold individually. IHS2014 $3.50 Hood and Sheet Metal Bolt fits: 240, 340, 404, 424, 444, 460, 504, 544, 560, 606, F656, (666 - 1568 as a dash panel bolt) Replaces: 369222R1 (5/16" - 18 NC x 5/8") USA made NOTE: Sold individually. See website for full applications. Hood hardware IHS1588 $14.50 J-hook fits: H, M & Supers, I, W4, W6 series gas, diesel, Replaces: 48707DA, 50997D USA made NOTE: Includes: (1) J-hook, (1) spring & (1) cotter pin. 4 used; Sold individually. IHS773 Hood Wing Nut fits: M & Supers gas, diesel, Replaces: Q3506, 103129, 126032 NOTE: Fastens rear of hood to gauge panel. IHS1288 $15.95 Hood Wing Nut Washer fits: M, & Supers gas, diesel, Replaces: 60707D USA made NOTE: Zinc plated. 1/4 Quick Release Fastener Nut Fits: 140 up to SN: 23300 (2 used on grille); 240, 340, 460, 560, 660 (2 used on grille & 4 used on side panels), Replaces: 369866R1 USA made NOTE: Sold individually. IHS1285 $5.85 Flanged Hex Head Bolt fits: 340, 385, 460, 484, 560, 660, 766, 786, 886, 966, 986, 1066, 1086, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 186, 3388, 3588, 3788 Replaces: 369918R1, 463-42510 (1/4"-20 NC x 5/8") USA made NOTE: Sold individually. See website for full applications. IHS919 Knurled Hood/Battery Cover Fastener Fits: 460, 560, 660, Replaces: 374240R1 (fastener), 372689R1 (retainer) (1/4"-20 NC, 1.315" o/a length) USA made NOTE: Sold individually. $125.00 IHS610 Replaces: 531231R1 USA made NOTE: Chrome plated; Steel. IHS609 Fits: A SN: 41330 & up, B & BN both SN: 40193 & up, Super A, Replaces: 58144DX (25-1/2" long) NOTE: Will NOT fit tractors w/ dzus fasteners. Price $4.25 $1.05 IHS2676 $4.50 IHS439 $2.10 IHS448 $1.95 IHS946 $1.75 Hood Bolt (Truss Head w/ Washer) Fits: 300, 330, 340, 350, 400, 450 IHS439: Replaces: 362664R91 (5/16" - 18NC coarse thread) IHS448: Replaces: 362662R91 (5/16" - 24NF fine thread) NOTE: Sold individually. Cage Nut fits: Farmall Cub SN: 210001 & up, IH Cub SN: 10001 & up, 140, 154, 184, 185, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 674, 684, 706 thru 1206, 756 thru 1456, 826, 1026, 766 thru 1568, 786 thru 1586, Hydro 100, & all Industrial versions, Replaces: 88592, 131883, 363885R1, 459063R1, 1502286C1 (5/16"-18 NC) NOTE: Sold individually. $9.75 IHS1557 $11.30 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Slotted Thumb Screw w/ Retainer Fits: 404, 424, 444, I504, 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456 Replaces: 376787R1 (retainer), 3112170R11, 377521R1,R3, 389872R1 (screw) (5/16"-18 NC x 3/4", 1.100" o/a length, .775" dia. head) USA made NOTE: Retains lower hood side panels. 4 used per tractor; Sold individually. 285 Chassis parts Chassis parts FDS311 $238.50 Hood w/ Hook & Spring Hardware Order # IHS973 Hood w/ Hook & Spring Hardware Fits: C, Super C, Replaces: 351090R11 (26-3/4" long) Grille Screen fits: 666, 686, Hydro 70, Hydro 86, Replaces: 65492C1 (19-7/16" tall, 20-5/16" wide, 1" thick) USA made IHS3103 Description / Application IH/Farmall IH/Farmall Grille Screen fits: 140 SN: 23301 & up Replaces: 368873R91, 372060R91, 384916R11 (19-1/16" tall x 15-3/4" wide) USA made NOTE: Grey primer. IHS471 Price $112.50 $149.95 Hood hardware cont... NOTE: Hoods do not have emblem holes. Order # $140.95 Center Grille Section w/ Screen only Fits: Late Super A-1 SN: 356001 & up; Super C (18-1/2" tall) USA made NOTE: Close out. IHS298 Description / Application Hoods - USA made Hood extensions, hardware Order # Price IHS190 $58.95 IHS955 $0.50 Side panels, parts cont... Description / Application Order # Hood Extensions (Dog Legs), Pair Fits: (Red) Cub up to SN: 210000 & Cub LoBoy up to SN: 10000, Replaces: 350985R11, 350984R11, 373884R11, 373883R11 USA made NOTE: Sold as a LH / RH pair. After painted customer must run a tap or thread chaser through the spot welded nuts to clean the paint out,otherwise customer will run the risk of breaking the spot welds on the nuts. Round Head Screw & Washer (For Hood Dog Legs) fits: Farmall Cub (1947-63), IH Cub LoBoy (1955-63), Replaces: 120221 (screw); 106497, 80684 (washer) NOTE: Stainless. 4 used per dog leg (8 per tractor); Sold individually. Price IHS192A $348.50 (w Exhaust Hole) IHS192B (w/out Exhaust Hole) $348.50 IHS1264 (RH) IHS1267 (LH) Description / Application Side Panels, Pair fits: 10-20 McCormick Deering, Replaces: 10679DX, 10680DX (33-9/16" x 21-15/16) USA made NOTE: Sold as a LH / RH pair. IHS1270 (RH) IHS1126 (LH) IHS2341 IHS2324 IHS2320 IHS2439 286 $34.50 $34.50 $34.50 $82.00 LH Lower Dash Side Support Panel Fits: 154 up to SN: 18708 Replaces: 404829R1 USA made IHS1128 (RH) LH Lower Dash Side Support Panel Fits: 154 SN: 22332 & up; 185 Replaces: 404829R2 USA made IHS954 (LH) IHS956 (RH) Instrument Panel Housing fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100 Replaces: 531038R1 NOTE: Cast aluminum. $78.00 $78.00 $93.50 $93.50 Instrument Panel Side Housing Fits following w/out cabs: 385, 395, 484, 485, 584, 585, 684, 685, 784, 785, 884, 885 (All thru 1985); 595, 695, 895 Also fits the following if notched: 4210, 4230, 4240 IHS1261 Replaces: 3121637R1, R3 IHS1264 Replaces: 3121638R1, R3 USA made NOTE: Parts are coated w/ a wax release agent. You must wet sand with fine sand paper before painting. Close out. Front Side Panel fits: 484, 485, 584, 585, 684, 685, 784, 785, 884; 885 w/ 4 wheel drive (All thru 1985); (IH only NOT Case IH) IHS1267 Replaces: 3121395R1 IHS1270 Replaces: 3121396R1 (11-1/2" tall x 14-3/8" at longest point) USA made NOTE: Parts are gel coated with a wax release agent on surface. We recommend a wet sand w/ fine paper prior to painting. The release will not allow paint to adhere. $38.95 $38.95 Front Lower Ribbed Side Panel Fits: 560, 660 IHS1126 Replaces: 369672R1 IHS1128 Replaces: 369673R1 (34-7/8" o/a length) NOTE: Will fit F460 if trimmed to 31-1/2" & 1 hole drilled. Order # Price IHS889L (LH) $34.50 IHS889R (RH) $34.50 Description / Application Order # Rear Heat Baffle Shield fits: 766, 966, 1468, 1568 IHS889L Replaces: 531499R1 IHS889R Replaces: 531500R1 (19-3/4" long x 6-1/4" wide) USA made NOTE: Bare metal. IHS984 $21.35 IHS391 (1-3/8" I.D.) $29.95 4-1/8" IHS887L (LH) $34.50 IHS887R (RH) $34.50 IHS874 (LH) $48.95 IHS876 (RH) $48.95 IHS855 (LH) $50.45 IHS857 (RH) $50.45 IHS855 IHS857 Price Rear Heat Baffle Shield fits: 1066, 1466, 1566, Hydro 100 IHS887L Replaces: 531507R1 IHS887R Replaces: 531508R1 (19" long x 6-1/4" wide) USA made NOTE: Bare metal. Front Radiator Side Panel w/out Louvers Serviceable for 574, 674, 2500A series IHS874 Replaces: 402458R2, 3116779R1 IHS876 Replaces: 402459R1, 3116780R1 (13-1/4" tall x 13-1/4" tapers to 9-1/2" wide) USA made NOTE: Primed gray. Front Radiator Side Panel w/out Louvers fits: 786, 886, 986, 1086, 1486, 1586, Hydro 186; Serviceable for 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100 IHS855 Replaces: 531063R3 IHS857 Replaces: 531064R3 USA made NOTE: Primed. IHS392 (1-1/4" O.D.) IHS392: Replaces: 350750R91 (1-1/4" O.D.) NOTE: IHS392 fits inside of pipe for Supers & Late Cub. 3.06" body dia. 3.06" IHS390 (1-3/4" I.D.) $29.95 Air Cleaner Cap fits: Late Super A SN: 356001 & up, Super A1, C, Super C, 4-1/4" 100, 130, 140, 200, 230, 240, 340 (All w/ Donaldson or United Specialties Air Cleaner) IHS390: Replaces: 351189R91 (1-3/4" I.D.) IHS597 $29.95 NOTE: IHS390 fits outside of pipe. 4-1/4" body dia. (1-5/8" O.D.) 4.595" IHS394 (2" I.D.) IHS597: Replaces: 351190R91, 361723R91 (1-5/8" O.D.) NOTE: IHS597 fits inside of pipe for Supers & later. 4.595" body dia. $32.50 5-1/4" IHS388 (1-7/8" O.D.) $29.95 $42.50 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price Description / Application Caps IHS982 $24.95 Air Cleaner Cap w/ Reinforcing Washer fits: 10-20, 15-30, 22-36, Regular, F20, F30, T20, TD35, W30, WD40, WK40 Replaces: 11196D (cap), 17190D (reinforcing washer) (6-3/16" O.D. x 3-7/32" tall, 3" O.D. x 1/4" tall) USA made NOTE: Bare steel. IHS620 (2-1/8" O.D.) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 5-1/4" Air Cleaner Cap Fits: H & Supers, I4, W4, 300, 350 gas, diesel IHS394: Replaces: 49461DA (2" I.D.) NOTE: IHS394 fits outside of pipe. 5-1/4" body dia. IHS388: Replaces: 353019R92, 355935R91 (1-7/8" O.D.) NOTE: IHS388 fits inside of pipe for Supers & later. 4-1/8" body dia. Air cleaner parts Order # Air Cleaner Cap fits: F12, F14, I12, I14, W12, W14, Replaces: 23647D (3-5/8" O.D. x 2-1/2" tall) USA made NOTE: Weld to existing pipe. Bare steel. Air Cleaner Cap fits: Cub, Cub LoBoy, A, AV, B, BN, Early Super A up to SN: 355669 IHS391: Replaces: 51493D (1-3/8" I.D.) NOTE: IHS391 fits outside of pipe. $29.95 4-1/8" body dia. 4-1/8" Rear Lower Ribbed Side Panel Fits: F460, 560, 660 IHS954 Replaces: 369187R1 IHS956 Replaces: 369188R1 (38-1/4" long, 6-5/8" wide) Description / Application Caps cont... $42.50 RH Lower Dash Side Support Panel Fits: 154, 185 (RH side only); 184 (RH & LH), Replaces: 404830R2 USA made Fiberglass Dash Cowling (Rear Hood) Fits: 154, 184, 185, Replaces: 404585R2 NOTE: Primer only. Wet sand w/ fine paper prior to painting. Description / Application $29.95 Air Cleaner Cap fits: M, MTA & Supers, I, T, W6, 400, 450 gas, diesel Replaces: 353018R92 (2-1/8" O.D.) NOTE: IHS620 fits inside of pipe for Supers & later. 5-1/4" body dia. Air cleaner parts continue on next page 287 Chassis parts Chassis parts Order # IHS1261 (LH) Price $76.50 Air cleaner parts cont... IH/Farmall IH/Farmall Side panels, parts IHS792 Side panels, parts cont... Air cleaner parts cont... Order # Price Air cleaner parts cont... Description / Application Order # Price Caps cont... IHS282 ABC1826 $45.15 $52.60 Description / Application Pipes, filter element cont... Air Cleaner Cap fits: 340, 404, 424, 444, 504 gas, 2424, 2444 Replaces: 353019R92 (2-1/8" O.D., 2" I.D) USA made NOTE: Black finish. Air Cleaner Cap fits: 460, 560, I656, 660 Replaces: 361722R91, 365316R91 (2-1/2" I.D., 5-1/4" O.D., 4" tall) USA made NOTE: Black finish. IHS967 FDS034 FDS081 $9.95 IHS1504 $34.95 ABC422 $13.10 $14.95 Air Cleaner Oil Cup fits: A, AV, B, BN & Early Super A up to SN: 355669 Replaces: 52871D (4-7/16" O.D. at lip; 4-1/16" I.D) Air Cleaner Oil Cup Serviceable for Late Super A SN: 356001 & up, C, Super C, 100, 130, 140, 200, 230; Crawlers: T4, T5 (All w/ Donaldson air cleaner) Replaces: 352597R91 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) IHS3316 JDS541 Air Cleaner Oil Cup fits: H, I, O, W4 & Supers, series 300, 350, F, I, 340 w/ Donaldson Air Cleaner, 404, 424, F504 Replaces: 52864DA, 362974R91, 375550R91, 378333R1 (5-3/8" I.D.) $17.50 $22.50 $12.15 Clamp fits: Same as JDS540 Replaces: 52865D Pipes, filter element IHS215 $17.95 Air Cleaner Pipe fits: Cub up to SN: 248124 w/ IH carburetor Replaces: 350752R1 288 NEW! Air Cleaner Hose fits the following gas tractors as a carburetor to air cleaner pipe hose: 656, (Late 706 & 806 w/ 2-1/2" hose), 756, 766, 826, 856; Also fits the following gas tractors as an upper air cleaner hose: Late 454, 464, 544 Hydro, Late 574, 674 (All using 2-1/2" ID hose), Replaces: 382400R1, 529313R1, 529313R11, 922025C1 (2-1/2" I.D., appx. 7-1/2" outer curve length) Miscellaneous ABC2443 ABC1765 ABC512 $74.95 Air Cleaner Oil Bath Filter Element (3" wide x 78" long) NOTE: Replaces the mesh in existing air cleaners. Sold by the bag (Normal utility air cleaners will use 2 bags). Air Cleaner Hose fits: Farmall Regular, F12, F14, F20, F30, 10-20, 15-30, 22-36, T20, W30, Replaces: 11337D (2" I.D. x 2-1/4" long) NOTE: Carburetor to air cleaner. $10.75 $27.50 $77.75 JDS741 $99.95 ABC470 $39.95 $5.10 Clamp Serviceable for same as FDS034 (All w/ Donaldson air cleaner) Replaces: 66357DA JDS540 Air Cleaner Pipe fits the following gas, LP: M, MV, Super M, Super MV, MTA, Super MV-TA, (Super W6 SN: 3951 & up), Super W6-TA, 400, 450, W400, W450, Replaces: 51441D, 357028R1 (2-1/4" O.D.) Hoses FDS261 Air Cleaner Oil Cup Clamp Fits: Same as IHS179 Replaces: 52872D ABC383 Air Cleaner Pipe fits: H, HV, I4, W4 Replaces: 51437D (1-3/4" O.D., 12-3/4" o/a length) $14.50 Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) fits: Some 154, 424 gas, 444 gas, 504 diesel, 544 gas Replaces: 324194R1, 563739, 576239 (1" I.D.) Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) fits: Some 656 thru 4586 using 3" unloader valve Replaces: 383734R2, 625043C1 NOTE: Measure before ordering. See website to confirm applications. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm ABC510 $64.60 ABC554 $42.95 ABC484 $24.95 Description / Application Pre-Cleaner Cap Assembly fits: B275, 340, 350, 404, 424, 444, 504 gas, 3414 using 2" I.D. base & 5-1/2" bowl Replaces: 407076R91 (2" I.D. plastic bowl, 5-1/2" precleaner O.D.) USA made Pre-Cleaner Cap Assembly fits: M, MD, Super M, Super MD, MTA, 400, 450, 504 diesel, W400, W450 w/ 2-1/4" I.D. base & 7" bowl, Replaces: 365261R91, 379670R91 USA made Pre-Cleaner Cap Assembly fits: WR9S, Super WD9, WDR9, 460, 560, 600, 606, 650, 660 & others w/ 2-1/2" I.D. base & 7" bowl, Replaces: 365262R91 USA made Pre-Cleaner Cap Assembly w/ Brass Nut fits: I-544 & 2544 diesels SN: 11573 & up, TD9 92 series and other IH / Farmall models w/ 3" I.D. base & 7" bowl, Replaces: 321190R91 (3" I.D. base) NOTE: Powder-coated green. Pre-Cleaner Cap Assembly fits: I-544 & 2544 diesels SN: 11573 & up, TD9 92 series and other IH / Farmall models w/ 3" I.D. base & 7" bowl Replaces: 321190R91 (3" I.D. base) Pre-Cleaner Cap Assembly Fits: IH/Farmall models 1026, 1206, 1256,1456 w/ 4" I.D. base & 10-1/2" bowl, Replaces: 321262R91 Pre-Cleaner Cover w/ Brass Knurled Nut fits: Some Super A, C, Super C, 100 thru 240, B275, F300, 340, F350, 404, 424, 444, I544, Replaces: 362999R91 (5-7/16" I.D.) USA made NOTE: Aluminum. Pre-Cleaner Bowl fits: Some Super A, C, Super C, 100 thru 240, B275, F300, 340, F350, 404, 424, 444, I544 Replaces: 363000R1 NOTE: Clear plastic. ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom = 5", Cone I.D. at top = 2-7/16", Bowl side height = 2-7/16", Overall height = 3-9/16" Order # Price Description / Application JDS559 $24.95 Pre-Cleaner Cover w/ Brass Nut (For 7" bowl) fits: 'Some' H, M, & Supers, W6 to W9, 400, 450, 460, 504, 544 Diesel, 560, 600, 606, 650, 660, 2504, 2544 diesel, 2606; Gas Powered Combines: 403, 453 Hillside, 503, 615, 715 (All using 7" dia. bowl) Replaces: 365413R1 NOTE: Green metal. ABC338 $13.95 Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet fits: Some H, M & Supers, W6 to 9 series,400, 450, 460, 504, 544 diesel, 560, 600, 606,650, 660, 2504, 2544 diesel, 2606;Gas powered Combines: 403, 453 Hillside, 503, 615, 715, Replaces: 365413R1, Can replace Donaldson bowl PO20227 NOTE: Clear plastic. ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3", Cone I.D. at top = 3-1/2", Overall height = 4-1/8" JDS557 $68.95 JDS561 $75.00 Pre-Cleaner Base (For ABC338 Bowl & JDS559 Top) fits: I544 diesel, 2544 diesel; Combines: 403, 503, 615, 715 diesels w/ Donaldson Pre-Cleaners w/ 3" base, Replaces: 365415R91 NOTE: Metal. Check size before ordering. Pre-Screener w/out Screen Fits: Same as JDS557 NOTE: Powder coat green. Check size before ordering. ABC3163 $39.95 JDS938 $4.95 ABC339 $17.25 NEW! Screen w/ Clip & 2 Springs (For Pre-Screener) fits: Same as JDS561 & other IH models w/ 7" dia. precleaner bowl, Replaces: 378724R1 (5-1/4" tall x 19-3/8) NOTE: Powder coat creme. Pre-Screener Clip & Springs Kit (For ABC3163 Screen) Replaces: 353639R1, 353758R1 NOTE: Powder coat green. Pre-Cleaner Bowl (10-1/2" dia.) For 3" to 4" inlet For air intake on diesel models: 1026, 1206, 1256, 1456, 21026, 21256, 21456, Replaces: 277377R1, Can replace Donaldson bowl PO16330 NOTE: Clear plastic. ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height = 3", Cone I.D. at top = 5-9/16", Overall height = 4" STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 289 Chassis parts Chassis parts IHS181 $19.95 Air Cleaner Cup Bail fits: Cub, Cub LoBoy, Replaces: 352163R2 USA made Price $59.95 Pre-cleaner parts cont... IH/Farmall IH/Farmall IHS179 $14.95 Order # ABC1824 $29.95 Oil cups, clamps, part IHS928 Pre-cleaner parts Donaldson pre-cleaner assemblies Order # IHS678 IHS681 DEC447 $12.95 $3.00 Donaldson Pre-Cleaner Assembly w/ Glass Dust Jar, Gasket & Decal Fits: Super A SN: 356001 & up, Super A-I, C, Super C, 100, 130, 140, 200, 230, 240, 340 (All w/ 1-3/4" I.D. base) Replaces: 352612R91 Dust Jar only (Ball brand) (For IHS678, IHS681), Replaces: 64178D, Donaldson P-2647 (2-5/8" O.D. thread, 3-1/8" tall) Gasket only (For IHS678, IHS681) Replaces: 64177D (2.550" O.D.) Fits: IH / Farmall models Original Style Order # Price $3.50 (.775" - 1.013" size range) IHS637 $3.80 Replaces: 39135H (1.687" - 1.780" size range) IHS638 $3.80 Replaces: 55624D (1.815" - 2.001" size range) IHS639 $3.80 Replaces: 45445D (1.807" - 2.285" size range) IHS640 $3.80 Replaces: 91406HA (2.175" - 2.500" size range) IHS641 $3.80 (2.400" - 2.625" size range) IHS642 $3.80 Replaces: 45813D (2.350" - 2.765" size range) IHS643 $3.90 (2.685" - 2.995" size range) Order # IHS536 Price $2.00 IHS719 IHS727 IHS717GK DEC447 $99.95 $14.95 $3.00 Donaldson Pre-Cleaner Assembly w/ Glass Dust Jar, Gasket & Decal Fits: H & Supers, I, O, W4 series, 300, 350 gas, diesel (All w/ 2" I.D. base) Replaces: 59095D Donaldson Pre-Cleaner Assembly w/ Glass Dust Jar, Gasket & Decal Fits: M, MTA & Supers, I, O, W6, 9 series gas, diesel, 400, 450 (All w/ 2-1/4" I.D. base), Replaces: 59096D $4.50 Decal only USA made 290 ABC455 $2.95 $5.25 Fuel Tank Webbing (3' long) fits: Tractors using 1-1/2" wide webbing for fuel tanks & other sheet metal parts (3' L x 1-1/2" W x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. ABC1827 MIS1123 $5.50 $1.80 Fuel Tank Mounting Pad fits: IH / Farmall models (2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually. $124.95 ABC494 $3.95 Fuel Tank Filler Neck Straightening Tool w/ Instructions fits: A thru 4786 (Same applications as IHS226, IHS416 caps) Replaces: 05-572 USA made NOTE: Used to straighten bent filler necks & filler neck tabs to make the cap seal properly (not for use with tanks using baffled filler necks). This part is a duplicate of the factory IH service tool that works in many applications using the ABC1880, IHS226, IHS416 & JDS416 caps. Fuel Tank Webbing (3' long) fits: Tractors using webbed insulation between fuel tank mounts & other sheet metal parts (3' L x 1" W x .042" thick) USA made NOTE: Economy black woven nylon. Can be glued or riveted. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fuel Tank Webbing (3' long) fits: Tractors using 2" wide webbing for fuel tanks & other sheet metal parts (3' L x 2" W x .050" thick) NOTE: Black canvas, mildew resistant. Sold in 3-foot length. Fuel Tank Mount Slotted Hex Nut Fits: H, HV, Super H, Super HV, M, MTA, MD; W, I, O 4, 6 series; WD9, Super W9 Replaces: 125357, 272071, 272312 (7/16"-20 NF, Grade 5) NOTE: Zinc plated. 3 used per tractor; Sold individually. Order # Price Order # JDS193 Price Description / Application $1.99 Gasket only (For IHS226, IHS416, ABC1880 Caps), Replaces: 23977DD (2.563" O.D., 1.875" I.D., .125" thick) NOTE: NBR rubber. IHS2642 $2.25 Gasket only (For IHS226, IHS416, ABC1880 Caps), Replaces: 23977DD (2.580" O.D., 1.900" I.D., .095" thick) USA made NOTE: Rubberized cork. IHS1886 $13.95 IHS577 $9.00 Underside view IHS338 $10.25 Underside view IHS226 $9.99 ABC1880 $10.10 (Top vented) Underside view IHS416 Underside view $18.95 Fuel Cap w/ Gasket fits: T20, W30 Replaces: 22785DA NOTE: Must drill vent hole into cap. $28.50 Description / Application IHS239 Fuel caps, gaskets Underside view ABC2672 Dust Jar only (Ball brand) (For IHS717, IHS719), Replaces: 54082D (3-1/4" O.D. thread, 3-7/8" tall) Gasket only (For IHS717, IHS719) Replaces: 66776D (3.200" O.D.) ABC1656 Description / Application Fuel Tank Insulating Pad fits: H, M, MTA, Supers, I, O, W4, 6, 9 series gas, diesel, I9, Hydro 70, Hydro 86, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424,444, 450, 460, 504, 544, 560, 600, 606, 650, 656, 660, 664, 666, 686, 706, 756, 766, 826, 856, 966, Replaces: 51121D, 60671D (1-1/2" O.D.) NOTE: Sold individually. Description / Application Fuel Tank Webbing (3' long) fits: Tractors using 1" wide webbing for fuel tanks & other sheet metal parts (3' L x 1" W x .050" thick) NOTE: Black canvas, mildew resistant. Fuel tank parts $4.50 $99.95 Price $4.95 Dimension IHS636 Decal only USA made IHS717 Order # ABC1823 Fuel caps, gaskets cont... Fuel Neck Grommet fits: Cub LoBoy 154, Cub LoBoy 185, 274, 284 Replaces: 106953C1 USA made Starting Tank Fuel Cap w/ Gasket (Says "Buy Clean Fuel - Keep It Clean) fits: H, M & Supers, I, O, W-4, 6, 9 series, 240, 300, 350, 400, 450, 600, 650 (All w/ distillate or diesels gasoline starter tanks) Replaces: 40756D (1-3/4" I.D., .350" height) NOTE: One gallon starting tank fuel cap. Starting Tank Fuel Cap w/ Gasket Fits as alternate cap to IHS577, but does not have correct appearance (1-3/4" I.D., 1-3/8" tang to tang) NOTE: Has (2) tangs on top mounted from center out. Chassis parts Chassis parts IHS681GK $99.95 Description / Application Donaldson Pre-Cleaner Assembly w/ Glass Dust Jar, Gasket & Decal Fits: Cub, A, B, (Super A up to SN: 355669) (All w/ 1-3/8" I.D. base) Replaces: 356254R91, 59206D, Donaldson X-1596-A NOTE: May need to lengthen air cleaner pipe for some applications. Fuel tank parts cont... Steel fuel lines NOTE: Fit fuel strainer to carburetor. Vented Fuel Cap w/ IHS239 Gasket & Splash Guard (Says "Buy Clean Fuel Keep It Clean") fits: F12, F14, F20, F30, 1020, 15-30, W-30, Cub, A, B, C, H, M, MTA & Supers, 100, 130, 200, 230, 300, 350, 400, 450, 600, 650, All I, O, W series IHS226: Replaces: 23995DA, 65024D (2-11/16" I.D., 5/8" height) ABC1880: Replaces: 23995DA, 12770D (2-11/16" ID, 1.118" height (cap only)) Triple Baffle Fuel Cap (Says "Buy Clean Fuel - Keep It Clean) fits: Cub, A, B, C, H, M, MTA & Supers, 100, 130, 140, 154, 184, 185, 200, 230, 240, 300, 330, 340, 350, 400, 404, 424, 444, 450, 460, 504, 544, 560, 600, 606, 650, 656, 660, 664, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1026, 1066 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, Hydro 86, Hydro 100, All I, O, W series gas, diesel, Replaces: 23995DC, 65024D, 361910R1 (2-7/8" O.D., 2-3/4" I.D., 2-1/2" height) Order # Price IHS3165 $19.50 IHS3170 $32.50 IHS3190 $32.50 NEW! Fits: Cub, Cub LoBoy (Both w/ STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com IH/Farmall IH/Farmall IHS679 Price $99.95 Wittek© tower (hose) clamps USA made Application NEW! Fits: Cub, Cub LoBoy (Both w/ vertical exhaust using IH carburetor) Replaces: 350968R11 NOTE: Will not fit 154, 184, 185 or tractors w/ Zenith carburetors. NEW! Fits: Cub, Cub LoBoy (Both w/ underslung (horizontal) exhaust using IH carburetor), Replaces: 362358R11, 369992R11 (5/16" O.D.) NOTE: Will not fit 154, 184, 185 or tractors w/ Zenith carburetors. vertical or underslung (horizontal) exhaust using Zenith carburetors) Replaces: 63499C91 (5/16" O.D.) NOTE: Will not fit 154, 184, 185 or tractors w/ IH carburetors. Steel fuel lines continue on next page 291 Steel fuel lines cont... Sediment bowl assys., parts cont... NOTE: Fit fuel strainer to carburetor. Order # IHS939 IHS937 Price $29.95 Order # Description / Application ABC281 Price Description / Application Order # Price $34.95 Sediment Bowl Assembly w/ 2.315" long Bowl & 1/4" x 5/16" Adapter Fits: H, M, MTA, Supers, I, O, W-4, 6, 9 series gas, diesel, F300, 340, 350, F350; Fits the following gas only: 400, 450, 460, 504, 544, 560, 606, 656, 606, 660, 706, 756, 766, 806, 826, 856, 2504, 2606, 2656, 2706, 2756, 2826, 2856, Replaces: 370832R91 (3/8" pipe inlet, (1) 1/8" pipe outlet) IHS1578 $34.95 IHS1574 $26.50 Glass Bowl (For Fuel Strainer/Water Trap) fits the following diesels: MD thru Super WD9, TD6 - TD14, 400, 450, 460, 560, 600, 606, 650, 660, Replaces: 54764D, 60877D, 62164D, 370783R1 (2-7/8" O.D., 4" long) USA made ABC1221 $4.95 Gasket (For Fuel Strainer/Water Trap) Fits the following diesels: MD thru Super WD9, TD6 - TD14, 400, 450, 460, 560, 600, 606, 650, 660, Replaces: 54763D, 60876D, 370520R1 (2.242" I.D., 2.948" O.D.) USA made NOTE: Rubberized cork. Fits: A, AV, B, BN gas only Replaces: 51498DX, 58137DX NOTE: Will not fit tractors w/ two fuel tanks. $31.80 Fits: Super A, Super AV, C, Super C, 100, 200 gas, Replaces: 350623R11, 356355R11 IHS1487 IHS2622 $38.50 Fits: H SN: 50866 & up, Super H up to SN: 19233, Replaces: 58367DAX USA made NOTE: Fits between gallon tank and strainer on distillate tractors (tractors w/ two tanks). $35.30 $2.95 Fits: M, MV, Super M, MTA gas only; Also fits the following w/ All fuel: M, MV (both w/ SN: 24215 & up); Super W6 SN: 3951 & up, Replaces: 60684DX, 56512DX, 58363DX Carburetor Fuel Line Fitting fits: 5/16" line; Cub thru 856, Replaces: 29899D, 58362DBX (1/4" NPT) USA made ABC124 JDS642 Order # Price $78.95 IHS713 292 $69.30 ABC534 The following parts (Sold separately) will fit IHS1577, IHS713, ABC281 Sediment Bowl Assemblies: Order # Price ABC124 $4.95 JDS642 $1.10 Gasket, Replaces: 360679R1 (2.150" O.D.) USA made ABC229 $3.50 Brass Screen, Replaces: 13194D (2" O.D., 3/8" dia. center hole) ABC534 $3.80 Plastic Screen, Replaces: 49923D (1-7/8" O.D., 3/8" dia. center hole) ABC236 $7.20 Bail Assembly w/ Brass Nut Replaces: 17564D (2-1/8" O.D., 2.370" long) All-Fuel Sediment Bowl Assembly (For tractors w/ two tanks) fits: A, B, C, Supers; Will also fit H, HV (both SN: 50866 & up); I4; O4, W4 (both SN: 1130 & up); I6; O6, W6 (both SN: 1317 & up); M, MV (both SN: 24215 & up) All w/ purchase of 90º elbow (elbow not supplied by STP, Inc.); 100, 130, 140, 200, 230 (All w/ All-Fuel), Replaces: 17215DA, 58361DAX, 51495DD, 370831R91 (3/8" pipe inlet, (2) 5/16" compression outlets) USA made Order # Price Description / Application ABC092 $27.30 Sediment Bowl Assembly fits: Cub, Cub LoBoy, A, B, C, Supers, 100, 130, 140, 154, 184, 185, 200, 230, 240, I300, 330, (340, I350 gas), 404, 454, (460 INT gas), 464, (504, 544 gas), 574, (606, 656 INT gas), 674, 2400A, 2404, 2500A, Replaces: 38465D, 355142R91, 369988R91, 61782C91, 354222R91 (3/8" pipe inlet, 1/8" pipe outlet, 1.280" long bowl. Includes 5/16" compression adaptor fitting) ACS326 $30.95 Sediment Bowl Assembly fits: 424, 444, 2424, 2444, Replaces: 614421R91 (Side inlet & outlet, 1/8" x 1/8" female pipe thread) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm ABC563 ACS326 Sediment Bowl Assys: Order # Price Description ABC123 $2.90 Glass Bowl, Replaces: 357958R1 (2" O.D., 1.280" L) ABC039 $1.50 Gasket, Replaces: 13193D (2" O.D) USA made NOTE: Cork ABC229 $3.50 Brass Screen, Replaces: 13194D (2" O.D., 3/8" dia. center hole) ABC534 $3.80 Plastic Screen, Replaces: 49923D (1-7/8" O.D., 3/8" dia. center hole) ABC563 $4.95 Bail Assembly w/ Nut Replaces: 49947DX USA made Fuel filters, parts Order # ABC490 ABC1423 Price $6.45 $32.15 Description / Application All-Fuel Sediment Bowl Assembly (For tractors w/ two tanks) fits: Regular, 10-20, 15-30, 22-36, F12, F20, F30, W30, W40, Early H, M, O, W4, 6 series Replaces: 17237D, 17237DA (1/4" pipe inlet, (2) 5/16" compression outlets) USA made NOTE: View website for full serial number breaks. ABC534 NOTE: The following parts (Sold separately) will fit ABC092, Description Glass Bowl (For ABC281, IHS713, IHS1577), Replaces: 357957R1 (2.315" L, 2-1/8" O.D.) ABC229 ABC092, ACS326 components ABC236 IHS1577, IHS713, ABC281 components Sediment bowl assys., parts IHS1577 ABC229 ABC039 ABC1421 ABC1315 $5.50 EACH $8.50 Description / Application In Line Fuel Filter w/ Hose & Clamps Fits: IH / Farmall models using 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor. Diesel Single Fuel Filter Assembly w/ Glass Bowl Serviceable for B414, 354, 364; Industrials: 2300A, 3414, 3444, 7000 Replaces: 3043645R91 ((4) 1/2" x 20 UNF ports) NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. Diesel Fuel Filter Element w/ Seals (For Cav/Simms diesel fuel filters) Fits: B414, 354, 364, 384, 385, 444, 454, 484, 485, 574, 584, 585, 674, 684, H84, 685, 784, 785, 885, Replaces: 3044506R93, Cav # 7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall) NOTE: Sold individually. Fuel Tank Screen fits: Most IH/Farmall models w/ stem style sediment bowl; Will fit ABC092, ABC281, IHS713, IHS1577 sediment bowl assemblies (.375" screen O.D., .216" pipe O.D., 2.530" o/a length) USA made NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl stem out. Bail (For Fuel Strainer/Water Trap) Fits the following diesels: MD thru Super WD9, TD6 - TD14, 400, 450, 460, 560, 600, 606, 650, 660, Replaces: 54760D, 60878DX, 165373H1, 370785R91 (5" tall, 3-1/8" wide) Throttle / governor controls, parts Order # IHS587 Price Description / Application $49.95 Throttle / Governor Control Assembly Fits: Cub, Cub LoBoy Replaces: 351005R1; 351006R1 (lever) USA made IHS537 Chassis parts Chassis parts IHS943 Fits: H gas only, Replaces: 56451DX (25" long) NOTE: Will not fit tractors w/ two fuel tanks. ABC123 Description / Application IH/Farmall IH/Farmall IHS941 $38.50 Fuel filters, parts cont... $45.95 Throttle / Governor Control Assembly Fits: A, B, BN, Replaces: 48259DX; 48260DA (lever) IHS538 $14.95 Lever only (For IHS537) Replaces: 48260DA IHS539 $59.95 Throttle / Governor Control Assembly Fits: Super A, 100, 130 Replaces: 350610R11; 350612R2 (lever) IHS540 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $18.00 Lever only (For IHS539) Replaces: 350612R2 Throttle / governor controls continue on next page 293 Throttle / governor controls, parts cont... Order # IHS588 Price Description / Application $59.95 Throttle / governor controls, parts cont... Order # Price IHS2654 $59.95 IHS892 $4.25 Throttle / Governor Control Assembly Fits: C, Super C, 200, 230 Replaces: 354742R11; 351327R2 (lever) IHS617 $17.45 IHS490 $58.50 Lever only (For IHS588) Replaces: 351327R2 Saw Tooth Throttle / Governor Control Assembly fits: H, M, MTA & Supers gas, LP, Replaces: 51351DBX, 51348DAX IHS875 IHS634 IHS634N $19.95 $5.25 $6.95 Square Tooth Throttle / Governor Control Assembly fits: H, M, MTA, Supers gas, LP, Replaces: 366727R91 NOTE: Powder coat red. IHS1116 Lever only (For IHS490) Replaces: 51348DAX Throttle / Governor Control Spring (For IHS490 throttle assy) Replaces: 51349D (1.322" o/a length, .085" wire dia., .925" O.D.) USA made IHS243 Throttle Dog (Stop) w/out Nut fits: H, M, MTA & Supers gas (All w/Square tooth throttle assy. / governor control handle) Replaces: 361245R1 IHS1763 $59.50 $7.20 $17.95 $0.50 Nut only fits: Same as IHS634 IHS035 FDS073 $29.95 Throttle Lever (M & W style) w/ FDS073 Friction Disc & Spring fits: H, Super H, HV, M, Super M, MV, MTA $3.50 IHS2666 Order # Price $12.50 $4.95 294 $52.50 Throttle Cable w/ Knob fits: 154, 185 Replaces: 404557R91 (cable w/ knob), 530118R1 (knob) (37" cable length) Upper Throttle Shaft w/ Nut fits: 706, 756, 806, 826, 856, 1026, 1206, 1256,1456D Replaces: 382683R11, 404238R11 (11" long x 1/2" dia., 5/16" dia. on lock nut end, 3/8" dia. on pin end) USA made NOTE: Bare steel. Order # Price Oval Clutch Inspection Plate w/ Bracket & Screw fits: Some A, AV, B, BN, Super A, Super AI, C, Super C, Replaces: 57576DX (3" x 4" O.D.) NOTE: Mounts under housing. Check shape prior to ordering. IHS1234 $79.95 IHS969 $9.95 Clutch Booster Cylinder Boot fits: 756, 766, 826, 856, 966, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Replaces: 57119C1 (5/8" top center hole, 1-1/4" bottom opening) NOTE: 2 used per tractor; Sold individually. IHS1197 $7.95 Pilot Bushing fits: 154, 185 Replaces: 404666R1 (.625" I.D., .875" O.D., .750" long) NOTE: Bronze. Use w/ IHS1234 pressure plate. IHS880 $5.95 IHS2408 $7.95 Pressure Plate Bolt & Nut fits: 154 SN: 15072 & up, 185 (All); Will also fit 154 up to SN: 15071 if using IHS1234 Replaces: 531619R1 (Grade 8) IHS1194 $9.50 IHS701 $14.95 IHS2339 $195.00 Clutch Drive Shaft fits: 154 up to SN: 18708 w/ creeper drive Replaces: 530422R2 (24-1/2" long) IHS2351 $195.00 Clutch Drive Shaft fits: 154 up to SN: 18708 w/out creeper drive Replaces: 404670R4 (31" long) IHS2342 $195.00 Clutch Drive Shaft fits: 154 SN: 18709 & up, 185 (All w/ creeper drive) Replaces: 543679R1 (22-5/8" long) IHS1653 $189.95 Clutch Drive Shaft fits: 154 SN: 18709 & up, 185 (All w/out creeper drive) Replaces: 543603R1 (29" long) IHS2348 $195.00 IHS2345 $195.00 Clutch Drive Shaft fits: 184 w/out creeper drive, Replaces: 117242C1 (29-5/8" long) IHS1970 $88.75 Transmission Drive Shaft Coupler Hub Fits: 154 SN: 15072 & up, 185; Will also fit earlier serial number by purchasing 531618R1 bolt, 9413994 nut & 120214 washer not supplied by STP, Inc. Replaces: 531709R1, 404683R1, 404669R91 IHS645 $175.80 Clutch Kit fits: Cub, Cub LoBoy (Not 154, 184, 185) IHS804 IHS882 $12.85 $14.95 Rubber Throttle Knob fits: Some 454 Replaces: 397931R2 (7/16" dia. hole, 2" long, 13/16" to 1-5/16" O.D.) Throttle Speed Indicator Plate fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 539232R1 (plate), 145372 (rivet) (7/8" wide x 3-3/4" long) USA made NOTE: Stainless. Not used on tractors w/ tilt steering. IHS873 $9.95 IHS493 $17.95 Round Clutch Inspection Plate w/ Bracket & Screw fits: Cub, some A, B, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, 2404, Replaces: 351486R1 (4-3/16" O.D.) NOTE: Mounts under housing.Check shape prior to ordering. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Clutch Spring Fits: A, AV, B, BN, Super A, Super AV, 100, 130, 140, Replaces: 47845DA (7" o/a length) USA made Clutch Spring fits: C, Super C, 200, 230 Replaces: 351210R1 (5-3/4" o/a length) Clutch Spring fits: H, M, Super H, Super M up to SN: 60000, 04 thru ODS6, W4 thru WD6, Replaces: 49444DA (6" o/a length) Clutch Spring fits: Super M series SN: 60001 & up, Super O6, Super W6 series, F300, F350, 400, 450, F460, 560, 660 Replaces: 357164R1 (3.850" o/a length) USA made NOTE: 4 used per tractor; (2) brake pedal, (1) clutch pedal, (1) TA handle; Sold individually. Clutch Pedal Return Spring Fits: 544, 2544, Replaces: 48599DA (8-1/8" o/a length) USA made Description / Application Clutch Dust Cover fits: Cub SN: 35351 & up, A, B, C & Supers, 100, 130, 140, 200, 230, 240, 404, 2404, Replaces: 57579DX (2.025" O.D.) NOTE: Mounts to side of housing. Clutch Spring fits: Cub, Cub LoBoy Replaces: 350951R1 (4-1/2" o/a length) USA made $7.95 Clutch parts IHS627 Throttle Spring only (For IHS035) Throttle Handle w/ Plug fits: 656, 706, 806, 1206, 4100, 4156, 4166, 4186, Replaces: 382682R1, 391666R1, 192105 (plug) (11-1/4" long x 1-3/8" wide x 1-7/8" thick, 1/2" shaft dia., 1/8" pin slot, 1" plug dia.) USA made NOTE: Red w/ black handle & nickel plated button plug. Description / Application $17.95 IHS687 Friction Disc only (For IHS035) IHS987 Throttle Friction Disc fits: 240, 274, 284, 340, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 606, 656, 660, 664, 674, 684, 784, 884, 2400A, 2424, 2444, 2500A, 2504, 2544, 2656, H84, 3444 Replaces: 369463R1, 388632R1, 394716R1, 399168R1 (.165" thick, 1.960" dia., .530" hole dia.) USA made Price IHS494 IHS1581 IHS006 $12.75 $119.95 Clutch Pedal Return Spring fits the following gear drive tractors: 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, Replaces: 626206R1 (4.463" o/a length, .083" wire dia, .744" spring O.D.) USA made Clutch Shaft & Transmission Spline Shaft w/ Bushing fits: Cub, Cub LoBoy (Not 154, 184 or 185), Replaces: 351534R21 (42-1/2" long) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Clutch Pressure Plate fits: 154 LoBoy, 185 Replaces: 531708R11 NOTE: Ductile steel. IHS1197 Clutch pilot bushing & IHS2408 clamping bolt sold separately. Clutch Brake Buttons (Puck) fits: 154, 185 Replaces: 404642R1 NOTE: 2 used per tractor; Sold individually. Clutch Drive Shaft fits: 184 w/ creeper drive, Replaces: 126206C1 (23-1/2" long) NOTE: Kit includes (1) NEW woven clutch disc (Rockford style, 6-1/2", 10 spline, 15/16" hub), (1) NEW clutch pilot bushing, (1) NEW pressure plate, (1) NEW graphite style throwout bearing, (1) clutch lineup tool. Adjust throwout bearing clearance BEFORE starting engine. No returns if broken. Clutch parts continue on next page 295 Chassis parts Chassis parts IHS603 $58.50 $118.95 Throttle Cable w/ Knob fits: 184 Replaces: 126262C1 (cable), 530118R1 (knob) (37-1/4" cable length) NOTE: Has threaded outer sheath. Order # Clutch parts cont... IH/Farmall IH/Farmall IHS2994 IHS1118 Description / Application Clutch parts cont... Clutch parts cont... Order # Price ABC550 $85.65 Clutch parts cont... Description / Application Order # Pressure Plate only fits: Same as IHS645 Replaces: 351760R91 (6 1/2" dia.) NOTE: Must recheck clutch adjustment & clearance after installation. No returns if broken. Will not fit 154 & up. MHS076 $36.95 Clutch Disc only fits: Same as IHS645 (6-1/2" dia., 15/16"-10 spline) NOTE: Must recheck clutch adjustment & clearance after installation. Will not fit 154 & up. IHS015 $49.95 Price IHS785 $68.95 IHS1197 $7.95 IHS958 $285.65 Throwout Bearing fits: Cub, Cub LoBoy (NOT 154 & up), Replaces: 350921R11 NOTE: Original graphite style. Must recheck clutch adjustment & clearance after installation. IHS730 ABC1437 IHS1541 IHS1861 $13.50 $7.50 $7.75 $15.60 Clutch Release Yoke, Pair Fits: Cub SN: 32229 & up, Cub LoBoy Replaces: 353239R2 (LH), 353240R2 (RH) USA made NOTE: Sold as a LH / RH pair. IHS2681 Clutch Release Yoke Pivot Pin fits: Cub, Cub LoBoy, Replaces: 350948R1 (0.373" dia, 5.695" length) USA made NOTE: Improved design using 4140 steel. Clutch Pilot Bushing fits: Cub, Cub LoBoy, 154, 185, Replaces: 251266R1 (0.815" O.D., .625" I.D., 1.000" length) USA made NOTE: Fits in crankshaft flange. IHS3264 $7.95 $44.85 Clutch Alignment Tool fits: Cub, Cub LoBoy, 154, 184, 185 (15/16" spline O.D., 10 splines, .625" pilot) IHS1155 $64.95 $49.95 IHS2984 $137.50 NEW Pressure Plate only fits: 154, 185 Replaces: 404639R94 (5-1/2" O.D., 3 spring) USA made 296 9" Clutch Kit fits: A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404 Replaces: 56631DB, 375695R92 (clutch); 18567D, 55212D, 361292R91 (throw out bearing); 375493R1, 353242R92, 384383R91, 375547R91 (pressure plate); 43291D, 364527R91 (Pilot bushing, 9" dia., 3 lever, 6 spring pressure plate, 500" wide at tip of fingers) NOTE: Older models may require the purchase of a new style throw out bearing sleeve (IHS1155) if the tractor is equipped w/ a graphite style (non-turning) throw out bearing. Price $22.50 IHS1438 $67.50 ABC2974 $168.50 IHS3004 $274.95 $65.95 NEW Clutch Disc only fits: 154, 184, 185 Replaces: 404640R93 (5-1/2" O.D., 10 splines, 0.937 spline dia) IHS1864 Pilot Bushing fits: 154, 185 Replaces: 404666R1 (.625" I.D., .875" O.D., .750" long) NOTE: Bronze. Use w/ IHS1234 pressure plate. Woven Clutch Disc fits: Same as IHS958 Replaces: 56631DB, 375695R92 (9" O.D., 6 splines, 1-1/4" spline dia.) ABC1928 Clutch Housing Inspection Cover Fits: Cub, Cub LoBoy, Replaces: 351485R2 USA made Throwout Bearing w/ Release Carrier Fits: 154, 185 (NOT 184) Replaces: 404671R1 (2.160" o/a length) Order # ABC3113 $295.00 NEW! Clutch Pilot Bushing fits: A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240, 404, Replaces: 43291D (0.875" I.D., 1.125" O.D., 0.995" long) Clutch Throw Out Bearing fits the following when equipped w/ replaceable rotating throwout bearing: Some A, B, C, H, W4 & Supers, 100, 130, 140, 200, 230, 240, 404, 2404, Replaces: 361292R91 (2.060" I.D., 3.215" O.D., 0.810" thick) USA made NOTE: Fits IHS1155 carrier for A thru 404 apps. Visit our website for additional application information. Clutch Release Bearing Carrier (For Replaceable Throw Out Bearing) Fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, 404, Replaces: 6116D NOTE: Bearing not included. This is the part referenced in IHS958 description for clutch bearing. Use ABC1928 bearing. Clutch Kit fits: (H, HV up to SN: 391357), I4, W4, Replaces: 52900D (pressure plate), 64772DA (clutch disc), 361292R91 (throwout bearing), ST544 (pilot bearing) NOTE: Kit includes rebuilt pressure plate, new woven clutch disc, throw-out bearing & pilot bearing. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application NEW! Clutch Alignment Tool fits: H, HV, I4, Super H, Super HV, O4, W4 (10 spline, 1-1/4" spline O.D., 0.970" O.D. pilot, 5-1/2" o/a length) $79.80 IHS3002 $122.00 IHS1884 $238.95 ABC1425 IHS2316 $55.00 $2.95 Price Description / Application $324.50 Clutch Kit fits: 300, 330, 340, 350, 460, 504, 544, 606, Replaces: 360746R91 (pressure plate), 360488R92 (woven clutch disc), 405625R91 (throw-out bearing) (10-1/2" O.D., 1.687" pressure plate spline I.D., 1.125" clutch spline I.D., 16 pressure plate splines) Woven Clutch Disc only fits the following w/ Rockford clutch: (H, HV up to SN: 391357), W4, I4, Replaces: 64772D, DA (10" O.D., 10 splines, 1-1/4" spline I.D.) USA made Rebuilt Pressure Plate only only Fits: H, HV (both up to SN: 391357), I4, W4, Replaces: 52900D (10" O.D., 6 springs) USA made Clutch Kit fits: (H, HV SN: 391358 & up), Super H, Super HV, Super W4 Replaces: 358041R91 (10-1/2" O.D., 10 splines, 1-1/4" spline I.D., 9 spring pressure plate) NOTE: Kit includes rebuilt pressure plate, new woven clutch disc, throw-out bearing & pilot bearing. IHS2999 Order # IHS2996 Woven Clutch Disc only fits: H SN: 391358 & up, Super H, Super W4 Replaces: 358556R92 (10-1/2" O.D., 10 spline, 1-1/4" spline I.D.) USA made NOTE: Includes rebuilt pressure plate, new woven clutch disc, throw-out bearing. Pilot bearing not included, see ABC2992 or ABC3000. See website for industrial applications. IHS2990 $124.95 Woven Clutch Disc only fits: 300, 330, 340, 350, 460, 504, 544, 606 Replaces: 360488R92 (10-1/2" O.D., 10 spline, 1-1/8" spline I.D.) USA made NOTE: See website for full applications. IHS2993 $158.00 Rebuilt Pressure Plate only fits: 300, 330, 340, 350, 460, 504, 544, 606 Replaces: 360746R91 (10-1/2" O.D., 16 splines, 1.687" spline I.D., 1.188" flywheel step) USA made NOTE: See website for full applications. ABC2937 $13.50 Clutch Pilot Bearing fits: F12, F14, H, I, O, W4, W6, WD6 series & Supers, M, MD, & Supers, MTA, 400, 450, 560, 660 Replaces: ST208B, ST544, 10701DA (0.984" I.D., 2.047" O.D., 0.590" wide) NOTE: Sealed bearing. ABC2992 $9.95 Clutch Pilot Bearing fits: 300, 350, 460, 544, 606, 656, 666, 686, 706, 756, 766, 806, 826, 856, 886, 966, 986, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3588, 3688, 3788, 4100, 4156, 4166, 4186, 6388, 6588, 6788 Replaces: ST575, 524598R91 (0.787" I.D., 2.047" O.D., 0.590" wide) NOTE: Sealed bearing. ABC3000 $8.95 Clutch Pilot Bearing fits: B275, B414, 330, 340, 354, 364, 384, 385, 424, 434, 444, 454, 464, 484, 485, 504, 574, 584, 585, 674, 684, 685, 784, 785, 884, 885, 2300A, 2400A/B, 2500A/B, 3400A, 3414, 3444, 3500A, 3514, 3616, 4000, 7000, Replaces: ST553, 537290R91, 538961R91 (0.787" I.D., 1.850" O.D., 0.551" wide) NOTE: Sealed bearing. ABC1937 $36.10 Clutch Throw Out Bearing fits: I6, ID6, M, MD, MDV, Super M, Super MD, Super MV, Super MDV, W6, WD6, Super W6, Super WD6, Replaces: 48974D USA made NOTE: For standard clutch NOT over center clutch. Visit our website for additional application information. Rebuilt Pressure Plate only fits: H SN: 391358 & up, Super H, Super W4 Replaces: 358555R92 (10-1/2" O.D., 9 springs) USA made Clutch Kit (For standard clutch NOT over center clutch) fits the following w/ 11" Rockford clutch assy: I6, ID6, W6, WD6, (M, MD, MV, MDV up to SN: 291049) Replaces: 48974D, 52840D, 52848DA, ST208B Woven Clutch Disc only fits the following w/ 11" Rockford clutch: F20, I6, ID6, M, MD, 06, OS6, ODS6, Regular SN: 39405 & up, T20, W6, WD6, Replaces: 14736D, 23573D, 52848D, 52848DA (11" O.D., 10 splines, 1-1/2" spline I.D.) Clutch Joint Rubber Washer fits: Regular, F12, F14, F20, H, M, Supers, I, O, W, 4, 6 series, Supers, Replaces: 6161H (1.125" O.D., 0.269" thick, 0.569" I.D.) NOTE: 8 used per tractor; Sold separately. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Clutch parts continue on next page 297 Chassis parts Chassis parts IHS1497 $29.95 Description / Application Clutch parts cont... IH/Farmall IH/Farmall IHS498 Clutch parts cont... Clutch parts cont... Order # Price Description / Application Order # Price ABC2988 $28.50 Clutch Throw Out Bearing fits: 300, 330, 340, 350, 385, (424, 444 single clutch), 454, 460, 464, 484, 485, 504, 544, 574, 584, 585, 606, 656, 664, 666, 674, 684, 685, 686, 784, 785, 884, 885; Also fits Industrials Replaces: 59879D, 365865R91, 405625R91 (2.375" I.D., 3.500" O.D., 0.730" wide) NOTE: See website for full applications. IHS1364 $13.55 ABC3109 ABC3151 IHS323 IHS2499 IHS2496 $20.40 $14.95 $19.95 $34.95 $22.50 $368.85 NEW! Clutch Alignment Tool fits: 300, 330, 340, 350, 460, 504, 544, 606, 656, 664, 666, 686 (Small spline: 1-1/8" spline O.D., 10 splines, 0.787" pilot, 9-3/8" o/a length; Large Spline: 1-11/16" spline O.D., 16 spline) Clutch Throw Out Bearing fits: Super MTA, W9, WD9, 400, 450, 560, 600, 650, 660, 706 thru 1586, 3088 thru 3788, 4100 thru 4186, 6388 thru 6788 Replaces: 69789C91 (2.490" I.D., 4.060" O.D., 0.870" wide) NOTE: Sealed bearing, no need to grease. NEW! Clutch Alignment Tool fits the following w/ 11" Rockford clutch: F20, I6, ID6, M, Super M, MD, 06, OS6, ODS6, Regular SN: 39405 & up, T20, W6, (Super W6 up to SN: 9084), WD6 (10 splines, 1-1/2" spline dia., 10-3/4" long, 0.965" pilot O.D.) Torque Amplifier Release Bearing Fits: SMTA, W6TA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 660, 664, 656, 666, 686 (Also fits as a clutch throwout bearing for F12, F14) Replaces: 18567D, 55214D, 362028R91 (2.078" I.D., 0.801" thick, 3.269" face diameter) NOTE: Measure before ordering. 298 Clutch Pedal Pivot Pin fits the following Gear Drive, Hydros: 706 thru 1206, 756 thru 1456, Early 766 thru Early 1468, Hydro 100, Replaces: 384047R1 (.625" & .248" O.D., 1.820" o/a length) USA made Order # Price IHS2354 $18.95 3-piece Transmission Gasket Kit Fits: A, Super A, B, BN, 100, 130, 140 Replaces: 46503D, 47279DA, 47283DB USA made ABC1503 $7.85 Top Transmission Shaft Seal fits: A, B, C, Supers, 100, 130 140, 200, 230, 240, 404 Replaces: 21969D, 381907R91, 42177D (1.625" I.D., 2.441" O.D., .312" wide) USA made Transmission gears, parts Order # IHS013 IHS011 IHS012 IHS2321 IHS2323 Clutch Easy Pedal Adaptor fits: H, M, Supers, MTA, 300, 350, 400, 450, W9, WD9, Supers NOTE: Installs between clutch rod & release shaft. IHS2317 Clutch Alignment Tool fits: Super MTA, 400, 450, 560, 660, 706 - 1486, 3088, 3288, 3688, 4100 - 4186 (Pilot: 0.787" diameter, small spline: 1-3/16" 11 spline, large spline: 1-3/4" 17 spline) IHS2325 Clutch Kit fits: 706, 756, 766, 786, 806, 826, 856, 886, 966, 3088 (Pressure plate: 12" dia., 17 splines, 1-3/4" hub; Clutch 12" dia., 11 spline, 4 pad, 1-13/16" hub) IHS2346 NOTE: Includes new pressure plate, clutch disc, throw out bearing, pilot bearing and alignment tool. See website for replacement numbers. Description / Application Price $30.00 $55.00 $73.50 $64.50 $78.50 Description / Application BACK IN STOCK! 1st & Reverse Sliding Gear fits: Cub, Cub LoBoy 154, 184, 185, Cub Cadets, Replaces: 350867R1 NOTE: 13 teeth. See website for Cub Cadet applications. 2nd & 3rd Sliding Gear fits: Cub up to SN: 192112, Some Cub Cadets Replaces: 350868R1 NOTE: 17 & 26 teeth. See website for Cub Cadet applications. BACK IN STOCK! Newer 2nd & 3rd Sliding Gear fits: Cub SN: 192113 & up, Cub LoBoy 154, 184, 185, Some Cub Cadets, Replaces: 364520R1 (16 & 26 teeth) NOTE: See website for Cub Cadet applications. Creeper Direct Drive Spline Gear fits: 154, 184, 185 all w/ creeper (reduction drive) & updated to 1/8" keyway Replaces: 55370C3 ABC2008 $12.50 ABC3362 $6.95 IHS2319 $98.50 IHS3178 $106.10 IHS3183 $158.00 Creeper Planet Gears (3) fits: 154, 184, 185 all w/ creeper (reduction drive) Replaces: 530435R2 IHS3185 $119.95 Creeper Drive Plate (Carrier) fits: 154, 184, 185 all w/ creeper (reduction drive) Replaces: 532462R2, 6632665 IHS3084 $8.75 $125.00 $145.00 $12.95 Creeper Sun Gear Drive Shaft fits: 154, 184, 185 all w/ creeper (reduction drive) & updated to 1/8" keyway Replaces: 55369C2 3-piece Transmission Gasket Kit fits: Cub, Cub LoBoy; Also 154, 184, 185 (All w/ out creeper gear), Replaces: 350846R1, 350866R1, 351546R1 USA made NOTE: Includes: (1) transmission shift cover gasket, (1) upper spline shaft oil seal gasket, (1) counter shaft bearing retainer gasket. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS187 IHS3181 $214.25 $138.50 Description / Application Transmission gears, parts cont... Order # Price IHS3337 $195.00 IHS3187 $144.95 NEW! Transmission Driving Shaft ABC3198 $19.45 NEW! Belt Pulley Shaft Seal fits: M, MD, Supers, MTA, (I, O, W6, WD6, Supers), 400, 450, W400, W450, 560, 660 Replaces: 378673C91 (2.125" I.D., 2.879" O.D., 0.438" wide) NEW! Transmission Drive Shaft Oil Seal Fits: (I, O, W6 series), M, MD, (Super M, MD up to SN: F52627 & L512541), (Super W6, WD6 up to SN: 9084) Replaces: 43359D, 71871C1 (2.063" I.D x 3.194" O.D. x 0.375" width) IHS048 $195.00 Creeper Gear Shaft Spline Drive Gear w/ Bushing fits: 154, 184, 185 (All w/ creeper (reduction drive)), Replaces: 532461R1 1st & Reverse Slider Gear fits: 544, 664, 2544, 656, 2656, 666, 686 Replaces: 388165R1 NOTE: 14 splines, 57 teeth. IHS070 $178.50 Reverse Driven Gear fits: 706, 756, 766, Transmission Counter Shaft Seal fits: H, Super H, Replaces: 356502R91, 356503R91 (1.375" I.D., 2.110" O.D., 0.315" wide) USA made 786, 806, 826, 856, 886, 966,986, 1066, 1086, 1206, 1256, 1456, 1466, 1468,1486 Replaces: 380288R1, 138764C1 NOTE: 35 teeth. Improved design heavier & wider like old-style gear. NEW! Transmission Driving Shaft Fits: H, HV (Both up to SN: 391357); O4, OS4, W4, Replaces: 52945DE (18 & 35 teeth) NEW! Transmission Drive Shaft Seal Fits: H, Super H, I4, O4, W4, Super W4 Replaces: 70258D, 79634H, 357967R91 (1.875" I.D., 2.875" O.D., 0.313" wide) USA made NEW! 4th & 5th Slider Gear Fits: Super H, Super W4 Replaces: 358023R1, 358218R1 NOTE: 31 teeth. NEW! 4th & 5th Speed Sliding Gear Fits: Super M, (Super W6 up to SN: 9084) Replaces: 356491R1 (20 & 30 teeth) NOTE: Does NOT fit Super MTA. Fits: M, MV both up to SN: 279322, (MD, MDV both up to SN: 283320), O6, OS6, ODS6, W6, WD6, Replaces: 52089DD (20 & 39 teeth) NEW! 4th & 5th Speed Sliding Gear Fits: H, HV, Replaces: 56420DA (18 & 35 teeth) NEW! Constant Mesh Gear Fits: H, HV, O4, OS4, Super H, Super HV, W4, Super W4, Replaces: 48418D, 48418DA, 357459R2 (55 teeth) Description / Application Transmission drive & secondary sun gear shaft Fits: Super MTA, 400, 450, 560 Replaces: 361288R4 Description Order # Price Transmission Drive..............................................IHS042........... $285.00 & Secondary Sun Gear Shaft w/ Belt Pulley Drive Gear NOTE: 20, 28, 39 teeth. Close out. Miscellaneous transmission parts Order # Price IHS1888 $6.80 IHS3071 $6.50 NEW! 4th & 5th Speed Sliding Gear Fits: M, MD, MV, MDV Replaces: 56535DA (20 & 34 teeth) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Torque Amplifier Handle Spring fits: F300, 330, 340, F350, 400, W400, 450, W450, 460, 504, 560, 606, 660, 2504, 2606, Supers MTA, W6TA, Replaces: 359920R1, R2 USA made Torque Amplifier Operating Handle Stop Pin fits: MTA, F300, F350, 400, 450, F460, 560, 660, Replaces: 141283 (1/2" O.D. x 1" long) USA made NOTE: 1 pin used per model. Miscellaneous transmission parts continue on next page 299 Chassis parts ABC496 $22.50 Transmission gears, parts cont... IH/Farmall IH/Farmall ABC2501 Chassis parts Clutch parts cont... Miscellaneous transmission parts cont... Order # $17.75 Torque Amplifier Operating Handle Pivot Bolt fits: MTA, F300, F350, 400, 450, F460, 560, 660, Replaces: 359919R2 (Stock 3/4" shoulder size) USA made IHS3078 $17.75 Torque Amplifier Operating Handle Pivot Bolt fits: MTA, F300, F350, 400, 450, F460, 560, 660, Replaces: 359919R20 USA made NOTE: Bolt has 7/8" oversize shoulder diameter. Must drill handle for oversize bolt and is for a worn handle hole. IHS1282 IHS039 IHS1854 IHS838 IHS761 IHS769 IHS856 300 $4.35 $20.00 $46.75 $9.95 $19.95 $35.65 $73.30 $30.95 Torque Amplifier Clutch Control Rod Pin Fits: Super MTA, F300, F350, 400, 450, F460, 560, 660, Replaces: 359918R1 (2.125" o/a length, 0.497" O.D. end, 0.558" O.D. shoulder) USA made Belt Pulley Block Off Plate fits: M, Supers, MTA, I, O, W6 series, 400, 450, 560, 660 Replaces: 49053DB, Will work for 365128R1 USA made IHS2077 $29.95 Torque Ampifier Control Cable fits: 786, 886, 986, 1086, 1486, 1586, 3388, 3588, 3788 Replaces: 120003C1, C2 (29-1/4" o/a length, 1/4" - 28 NF threaded end) Order # IHS824 Price Park Lock Assembly fits: 706 thru 1568 Replaces: 382847R1, 384261R1, 384263R1, 390856R1, 390857R1 390858R1, 64578C91 USA made IHS266 Shift Lever Quadrant Top Cover Fits: 756, 766, 826, 856, 966, 1066, 1256, 1456,1466, 1468 (Gear Drive tractors only) Replaces: 398005R2 USA made Shift Lever Quadrant Outer Cover Fits: 756, 766, 826, 856, 966, 1066, 1256, 1456, 1466, 1468 (Gear Drive tractors only) Replaces: 398006R1 USA made Belt Pulley Block Off Plate fits: H, Super H, I, O, W4 series, F300, F350, F460 Replaces: 49618DA, Will work for 365129R1 USA made IHS981 IHS3314 ABC3326 Description / Application Gear Shift Knob Hi-Low & Forward / Reverse for Hydros: 70, 86, 100, 544, 656, 664, 666, 686, 826, 966, 1026, 1066, 3488; T.A. & Gear shift for Gear Drive: 544, 656, 664, 666, 686; Trans gear shift lever for: IH 154, 184, 185; Gear shift for Lawn & Garden: Cub Cadet 72, 73, 86, 104, 106, 108, 124, 126, 128, 582, 800, 1000, 1200 Replaces: 388180R2, 401467R1, 537110R1 NOTE: The hole may need to be drilled to fit some applications. $3.95 $64.95 $79.95 $6.50 Park Lock Lever Actuating Spring fits: 706 thru 1568, Replaces: 208354R1 (.092" wire dia., 5.245" o/a length) USA made Transmission Shift Pattern Plate fits: 340, 460, 504, 560, 606, 660, 2504, 2606 (All w/ Torque Amplifier), Replaces: 371371R1 (1-5/8" L x 1-1/16" H) USA made Price $12.00 Description / Application Gear Shift Lever fits: Cub (NOT w/ Deluxe Seat), Replaces: 356530R91 USA made IHS2658 Order # IHS242 IHS2505 Gear shift parts Torque Amplifier Handle Button Plug Fits: 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 (All using a 1-3/16" plug), Replaces: 432344 (1.225 tang dia.) USA made Range Cover Shift Cam Detent w/ Rivets Fits: 706, 806, 1206, 4100, 4156, 4166 Replaces: 380306R51 NOTE: Rivet to existing cam shifter. Description / Application $30.95 $26.50 $39.95 $8.75 First & Reverse Shift Fork fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 355600R93 USA made Gear Shift Knob fits: Cub, Cub LoBoy, A, B, C, H, M, MTA & Supers,I, O, T, W-4, 6, 9 series, 100, 130, 140, 200, 230, 240, 300, 330, 340, 350, 354, 400, 404, 424, 434, 444, 450, 454, 460, 484, 504, 560, 574, 584, 600, 606, 650, 660, 684, 685, 784, 884, B-250, B-275 B-250, B-275, B-414, 3414, 3616, 3514; Crawlers: T4 thru some TD18A (also used as a reverser knob); Cub Cadet mowers: 70 - early 582, Replaces: 53717DA, 3121549R1 IHS1200 IHS1204 IHS1208 Shift Lever Repair Pin Kit fits: H thru Super WD9; 300 thru 660 (Row-Crop & Utility), Replaces: 40465DA, 40466DA, 357003R1; 256918R1 (large pin); 256919R1 (small pin); (2 ea) 172529 (expansion plugs) USA made IHS1799 NEW! Premium Shift Lever Repair Pin Kit fits: H thru Super WD9; 300 thru 660 (Row-Crop & Utility), Replaces: 40465DA, 40466DA, 357003R1, 256918R1 USA made NOTE: Use this kit in place of IHS981 when shift tower pin hole is worn or elongated. IHS1908 NEW! Hi-Lo Range Shifter Shaft Seal Fits: B275, B276, B414, 354, 364, 384, 424, 434, 444, 2300A, Replaces: 353183R91, 385038R91 (0.625" I.D., 1.128" O.D., 0.250" wide) NOTE: See website for all applications. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS243 $8.95 $8.50 $8.95 $14.95 $8.50 Transmission Shift Detent Spring (For Hi-Lo & Reverse shifter) fits: 756, 766, 826, 856, 966, 1066, 1256, 1456, 1466, 1468, 1566, 1568 (All gear drive tractors) Replaces: 397991R1 (0.085" wire dia., 1.125" o/a length) USA made NOTE: 2 used per tractor; Sold individually. Gear Shift Pattern Insert (For IHS242) (5 Speed Plus Reverse) fits the following gear drive tractors: 544, 656, 664, 666, 686, Replaces: 2752898R1 (1.600" dia) USA made High/Low Insert (For IHS242) Fits the following Hydros: 70, 86, 100, 544, 656, 666, 686, 826, 966, 1026, 1066 Replaces: 2753957R1 (1.600" dia) USA made Gear shift parts cont... Price Description / Application IHS794 Order # $15.00 Rubber Gear Shift T.A. Knob fits: IH 756, 766, 826, 856, (886 up to SN:16999), 966, (986 up to SN: 23999), 1066, (1086 up to SN: 47999), 1256, 1456, 1466, 1468, (1486 up to SN: 25999), 1566, 1568, (1586 up to SN: 20999) 3388 up to SN: 10384, (3588 up to SN:12729), 4386 SN: 2501 & up, 4568, 4586 Replaces: 397978R2 NOTE: Also used as torque amplifier knob. IHS834 $34.95 Rubber Gear Shift Boot fits: I9, ID9, W9, WD9, WR9, WDR9, WR9S, Supers, 600, 650 Replaces: 61064D IHS832 $8.50 Rubber Gear Shift Boot fits: 544, 656, 664, 666, 686, 2544, 2656 (All w/ gear drive transmission), Replaces: 388182R1 IHS2480 $18.50 Rubber Gear Shift Boot fits: B250 thru B450, H, M, Supers, I, O, T, W4, W6, Supers, 300 thru 660, Replaces: 64603DA (4-3/4" tall) NOTE: See website for full applications. Steering wheels, parts Just like original • All new material • Steel spokes Forward/Reverse Insert (For IHS242) Fits the following Hydros: 70, 86, 100, 544, 656, 666, 686, 826, 966, 1026, 1066 Replaces: 2753956R1 (1.600" dia) USA made Torque Amplifier Knob Insert (For IHS242) Fits the following w/ T.A.: 544, 656, 664, 666, 686, Replaces: 2752916R1 (1.600" dia.) USA made Shift Pattern Insert (For IHS242 Knob) Fits: 154, 184, 185; Cub Cadet: 72, 73, 86, 104, 106, 108, 124, 126, 128, 582, 800, 1000, 1200 (1-5/8" O.D.) USA made Order # Price IHS683 $52.50 IHS299 $49.50 IHS328 $49.50 $7.20 Rubber Gear Shift Knob Forward / Reverse fits: IH Hydro models Replaces: 397931R2 (7/16" dia. hole, 2" long, 13/16" to 1-5/16" O.D.) Description / Application Steering Wheel fits: Late F12, F14 (1938-39); Early A, B (up to mid 1940); Serviceable for Late F20, F30, Early H, M (up to mid 1940) if 16" dia. wheel is desired, Replaces: 29118DC, 39636DB, (Made by French & Hecht 848-IH) (16" dia., 3/4" shaft, keyed 3 COVERED TO CENTER spokes) Steering Wheel fits: Cub, A, (Early Super A up to SN: 355669), AV, Super AV, B, BN, C, Replaces: 60069D (15" dia., keyed hub, 3/4" shaft, 3 spokes) Steering Wheel fits: Late Super A SN: 356001 & up, C, Super C, H, M, Supers, I, O, W4, 6, 9 series (w/ 17-5/8" 3 bare spoke wheel); 100, 130, 200, 230, F300, 400, Replaces: 60070D (17-5/8" dia., keyed hub, 3/4" shaft, 3 spokes) Steering wheels, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 301 Chassis parts IHS896 $13.50 Price IHS858 Gear shift parts cont... IH/Farmall IH/Farmall Order # Description / Application IHS3075 IHS3081 Chassis parts Price Miscellaneous transmission parts cont... Steering wheels, parts cont... Steering wheels, parts cont... Just like original • All new material • Steel spokes Order # IHS173 Price Order # Description / Application IHS850 $59.95 Steering Wheel fits: 300 Utility Replaces: 363227R91 (17-5/8" dia., splined hub, 36 splines, 7/8" shaft, 3 spokes) IHS422 ABC504 IHS450 (Power) IHS451 (Manual) $52.50 $5.30 ABC504 Steering Wheel Nut (For IHS683, IHS299, IHS328, IHS422) (3/4"-16 NF x .444" tall) IHS852 Steering Wheel fits: Late 140, 240, 330, 340, 350, 404, (424, 444 w/ manual steering), 450, 460, (504 w/ manual steering), 560, 660, 3414, 4100, 4156, 4166, 4186 (All w/ splined hub) Replaces: 366557R1 (18" dia., splined hub, 36 splines, 7/8" shaft, 3 covered to center shiny spokes) New & improved) Steering Wheel Nut (For IHS173, IHS419), Replaces: 367232R1, 368576R1 (13/16"-20 UNEF) $84.95 Steering Wheel Cap fits: Same as IHS850 Replaces: 400220R1 IHS852GK Gasket only (For IHS852) Replaces: 402434R1 IHS1381 Steering Wheel Cap (For IHS419) IHS450 Replaces: 366566R1 IHS451 Replaces: 366558R1 NOTE: Caps will also fit IHS542 Steering Wheel, but only original to steering wheel until '56' series. IHS2095 $19.85 $3.95 Decal (For IHS781) (1-3/4" O.D.) USA made 302 $5.30 IHS522 $58.50 IHS781 $9.95 Steering Wheel Horn Button Spring Fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 400396R1 USA made NOTE: This spring is required to maintain pressure on the cap (IHS852). The cap will not fit correctly w/out the spring. DEC522 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering Wheel Nut fits: Same as IHS542, Replaces: 367232R1, 368576R1 (13/16"-20 UNEF) $49.50 IHS685 $2.95 Steering Wheel fits: Cub Cadets: Original, 70, 71, 72, 73, 100 (All w/ 7 HP & up to SN: 400000) Replaces: 376176R1 (13" dia., 40 spline, 11/16" hub dia., bare spokes) Description / Application Steering Wheel fits: Cub Cadets: 100, 102, 122, 123, Replaces: 385734R1 (13" dia., 40 splines, 11/16" hub dia., 3 COVERED TO CENTER spokes) IHS863 $34.95 Serviceable Steering Wheel Cap (For GTS001) IHS2322 $8.20 IHS685 $2.95 Steering Column Grommet fits: Early Cub Cadet up to SN: 400000, 154, 184, 185, Replaces: 376254R1 USA made NOTE: 1 used per tractor. Steering Wheel Nut (For GTS001) (3/4"-16 NF x .444" tall) IHS860 $59.95 IHS863 $34.95 Serviceable Steering Wheel Fits: Cub LoBoy 154, Cub LoBoy 184, Cub LoBoy 185, (Cub Cadet 982 SN: 665001 & up), Cub Cadet 1872, 1912, 1914, 2072; Serviceable for wheels w/ 2-1/2" center cap opening, Replaces: 404601R1 (15" dia., COVERED TO CENTER spokes) Steering Wheel Cap fits: Same as IHS860, Replaces: 393157R2, 533742R1 (2.511" O.D) ABC502 $2.50 JDS519 $14.95 JDS564 $13.45 $15.50 Rubber Dust Cover fits: Same as IHS542, Replaces: 382587R1 GTS002 Price $49.50 Steering Wheel Cap (Power Steering) Fits: Same as IHS542 Replaces: 378395R1 Decal (For IHS781) (1-3/4" O.D.) USA made IHS682 Order # GTS001 $6.95 $15.75 Tilt Steering Adjustment Lever Fits: Same as IHS850 Replaces: 400214R2 USA made Description / Application Steering Wheel fits the following w/ regular or telescopic steering: (424, 444 w/ power steering), 454, 464, 484, 485, (504 w/ power steering), 544, 574, 584, 606, 656, 664, 666, 674, 684, 686, 706, 756, 766, 784, 786, 806, 826, 856, 884, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 2400, 2424, 2444, 2500, 3088, 3288, 3388, 3588, 3688, 3788 4166, 4186; Case /IH 4210, 4230, 4240 4366, 4386, 4568, 4586, 4786 , 5088, 5288, 5488, 6388, 6588, 6788, 7288, 7488; Case C50, C60, C70, C80, C90, C100; Hydros 70, 84, 86, 100, 186, 3488; Combines: 205, 315, 403, 403 Hillside, 453, 503, 615, 715, 815, 915, 1400, 1420, 1440, 1460, 1470, 1480; Windrowers: 275, 375; Cotton Pickers: 414, 416, 420, 422, 616, 622, 782; Cotton Harvester: 95, 1400, Replaces: 385156R1 (16" dia., splined hub, 36 splines, 7/8" shaft, 3 covered to center shiny spokes) Steering Wheel Cap Fits: Same as IHS542 $14.95 $9.95 $6.95 Tilt Steering Wheel Cap Mounting Plate fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 w/ tilt steering Replaces: 400395R1 (2.940" O.D., .485" tall) NOTE: Steel. Knob (For Tilt Steering Adjustment Lever) fits: Same as IHS850 Replaces: 400214R1 NOTE: Black rubber. IHS980 ABC504 $8.95 Serviceable Steering Wheel Cap (For IHS419) DEC522 Cover (For Tilt wheel steering) Fits: Same as IHS850 Replaces: 400213R1 USA made NOTE: Black plastic. Not exact of original. $5.30 $48.50 $48.50 Price $59.95 Steering Wheel Nut Fits: Same as IHS850 IHS926 IHS781 $49.95 Order # IHS542 Steering Wheel Nut (For GTS002) (3/4"-16 NF x .444" tall) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Steering Wheel Nut fits: Same as IHS860, Replaces: 124944 (5/8"-18 NF) Steering Wheel Acorn Nut Serviceable for Cub thru 650 (All w/ exposed nut); Correct for W400 (w/ manual steering), Replaces: 364360R1 (3/4"-16 NF x .859" tall) NOTE: Stainless steel. Power Steering Plate Serviceable for H thru 650 (All w/ exposed nut) Steering wheels, parts continue on next page 303 Chassis parts Chassis parts IHS419 $2.95 Steering Wheel fits: M, Supers, I, W9 series, 400, 450, 600, 650 (All w/ 4-spoke), Replaces: 557282R91 (20" dia., keyed hub, 3/4" shaft, 4 spokes) Description / Application Steering Wheel fits the following w/ tilt steering: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 Replaces: 400217R1 (16" dia., 36 splines, 7/8" shaft) Steering wheels, parts cont... IH/Farmall IH/Farmall IHS685 $49.50 IHS927 Price $124.95 Steering wheels, parts cont... Steering wheels, parts cont... Order # IHS685 ABC504 Order # Steering Wheel Nut fits: 140, 240, (F300, I300 w/ power steering), 330, 340, (F350, I350 w/power steering), 400, 404, 504, B414, 424, 444, 450, 460, 504, 560, 660, 3414, 4100, 4156, 4166, 4186 (All w/ splined hub); Also fits Montgomery Ward tractors Replaces: 367232R1, 368576R1 (13/16"-20 UNEF) $5.30 Steering Wheel Nut fits: 300, 400, W400, 600, 650 (All w/ original power steering plate), Replaces: 366285R1 (13/16"-20 UNEF) USA made NOTE: Zinc plated. $9.25 $12.50 Price ABC1514 $8.95 IHS133 $12.50 IHS1764 $119.95 IHS606 IHS1774 $92.50 $92.50 Steering Wheel Spinner Fits: IH/Farmall models NOTE: Aluminum. IHS607 $10.95 Steering parts Order # IHS844 IHS964 IHS148 ABC1501 304 Price $28.95 $28.50 $12.50 $9.95 Description / Application IHS1776 $19.50 Steering Shaft Support Knuckle Fits: Cub, Cub LoBoy Replaces: 350902R1 Steering Shaft Support Knuckle Fits: A, Super A, B, 100, 130, 140 Replaces: 9442DAX IHS1566 Steering Arm Knuckle Set Screw Fits: Cub up to SN: 118687 Replaces: 43528D (1/2"-13 NC) USA made IHS605 $54.95 Description / Application Steering Wheel Worm Shaft Seal Fits: Cub, Cub LoBoy Replaces: 350892R91, 385703R92 (0.875" I.D., 1.379" O.D., 0.250" wide) NOTE: For long steering wheel shaft. Will not fit 154, 184, 185. Steering Arm Knuckle Set Screw w/ Nut fits: A, C, Supers w/ wide front Replaces: 43466DB USA made Steering Sector Shaft fits: A, AI, AV, Supers, Replaces: 47683DB USA made NOTE: 4140 steel. Square end for steering arm. Steering Sector Shaft fits: Some A, Super A, 100, 130, Replaces: 356549R1 (3/16" keyway at gear end, 1/4" keyway at tapered end) USA made NOTE: 4140 steel. Threaded end drilled for cotter key. Thread size 7/8" -14. Steering Sector Shaft fits: 140 Replaces: 70890C1 (1/4" wide keyways) USA made NOTE: 4140 steel. Threaded end drilled for cotter key. Thread size 7/8"-14. Nut fits: Some A, Super A, 100, 130, 140 Replaces: 359040R1 (7/8"-14 thread) Vertical Steering Shaft Bushing Fits: A, Super A, 100, 130, 140 Replaces: 47676DR (1.689" o/a length, 1.325" O.D., 1.190" I.D.) NOTE: Must ream to size after installed. Fits IHS606, IHS1764, IHS1774 sector shafts. Steering Shaft Support Bearing Assembly fits: C, Super C, 200, 230, 240, 404, 2404, Replaces: 351125R1, R2, 351126R1, R11, R12 NOTE: 2 piece support. Made from ductile iron. $142.00 Order # Price ABC1628 $14.95 Lower Steering Shaft Seal fits: A, Super A, 100, 130, 140, Replaces: 47703D, 358775R91, 358815R91, 382230R91 (1.187" I.D., 2.004" O.D., .250" width) NOTE: Seal for shaft that center tie rod arm mounts to. IHS1532 $12.50 IHS1800 IHS018 IHS1526 $78.95 $365.00 $12.95 IHS188GK $9.85 IHS746 IHS750 IHS3245 $84.75 $134.30 $4.50 Steering Sector Gear fits: Some A, Super A, 100, 130, Replaces: 47677DA, 351815R1 (9 full teeth - 3/16" keyway) Lower Steering Worm Wheel Shaft Seal Fits: Cub, Cub LoBoy Replaces: 350891R91, 358836R91, 370510R91 (1.125" I.D., 1.565" O.D., 0.250" wide) NOTE: Seal for splined shaft that center tie rod arm mounts on. IHS1778 IHS2931 $142.00 Steering Sector Gear fits: 140 Replaces: 70888C1 (9 full teeth, 1/4" wide keyway) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering parts cont... $149.95 Description / Application Price Description / Application IHS2943 $168.50 Steering Wheel Worm Shaft Seal Fits: A, Super A, 100, 130, 140 Replaces: 48956D, 358229R91 (1.624" O.D., 1.000" I.D., .250" wide) NOTE: For long steering wheel shaft. Steering Worm Shaft fits: M, MV; Super M & MTA both up to SN: F52627 or L512541 gas, LP; 400 SN: 21804 & up LP only w/ 22" tank & w/out factory power steering; 450 up to SN: 13135 LP only w/ 22" tank & w/out factory power steering, Replaces: 50052DB (46-1/2" o/a length, 3/4" NF thread) NOTE: Does NOT fit diesel tractors (or gas 400 & 450). IHS3250 $4.95 7-piece Steering Sector Bushing, Bearing & Seal Kit fits: A, Super A, 100, 130, 140 series NOTE: Bushing must be sized. See website for replacement numbers. ABC2837 $9.95 NEW! Upper Bolster Pivot Shaft Horizontal Seal fits: M, MD, Supers, MTA, 400, 450 Replaces: 364470R91, 289198 (1.500" I.D., 2.380" O.D., 0.315" wide) ABC1630 $7.95 Steering Wheel Worm Shaft Seal Fits: B, BN, C, H, M, MD & Supers, MTA, 200, 230, 240, F300, F340, F350, 400, 450, Replaces: 43800D,DA, 359042R91, 359257R91, 364468R91, 488561R91 (1.000" I.D., 1.503" O.D., 0.250" wide) IHS2945 $8.50 Steering Worm Shaft Bearing fits: B, BN, C, H, M, MD, MTA, Supers, 200, 230, 240, F300, F340, F350, 400, 404, (424, 444 w/out power steering), 450, F504 Replaces: ST225B (0.984" I.D., 2.047" O.D., 0.590" width) NOTE: Open sides, not sealed. For sealed bearing order ABC2937. See website for full applications. IHS2930 $22.50 Steering Worm Bearing Retainer Fits: A, B SN: 7014 & up; C, H, I, O, M, MD, W4, W6 series & Supers, MTA, 100 - 240, F300, F340, F350, F400, 404, F450, (424, 444 w/out power steering), F504 Replaces: 6660DA (2-3/16" - 12 RH thread) USA made IHS036 $145.00 IHS1922 $34.95 Lower Radiator / Steering Gear Housing fits: Cub, Cub LoBoy Replaces: 350886R11 NOTE: For gaskets use IHS1526 & IHS188GK. Includes the steering worm shaft bushing and the steering sector bushing. Both are installed. Steering Gear Housing Gasket Set Fits: Cub, Cub LoBoy Replaces: 350893R1, 350899R1 USA made NOTE: Includes (1) steering worm shaft gasket, (1) steering gear housing base gasket. Use w/ IHS018 housing & IHS188GK gasket. Order # Mounting Gasket (For Cub Radiator) USA made Steering Sector Gear fits: H, Super H, F300, F350, Replaces: 50038DB NOTE: 32 teeth. Full circle style. Can replace 19 tooth sector (1/2 moon style). Steering Worm Shaft fits: H, Super H, F300, F350, Replaces: 50047DB NEW! Steering Worm Gear Housing Cover Gasket fits: H, Super H, F300, F350, Replaces: 43799DA USA made Steering Sector Gear fits: M, MD, Supers, MTA, 400, 450 Replaces: 50037DB NOTE: 32 teeth. Full circle style. Can replace 19 tooth sector (1/2 moon style). STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Steering Worm Gear Housing Cover Gasket fits: M, MD, Supers, MTA, F400, F450, Replaces: 48952DA USA made BACK IN STOCK! Upper Front Pivot Bolster Shaft fits: H, HV, F300, F350, Super H, Super HV, Replaces: 67837DB, 69060D Steering Sector Pin Stud fits the following w/ manual or power steering: I300, I330, I340, I350, I460 Utilities NOTE: Fits into sector 365841R91 or 372592R91. Must weld in place of original. 1 used per tractor. Steering parts continue on next page 305 Chassis parts Chassis parts MIS103 Description / Application Steering Wheel Nut fits: Cub, Cub LoBoy, A, B, C, H, M, MD, Supers, I, O, W4 thru W9 series, Supers, 100, 130, 200, 230, F300, F350, F400, F450; Lawn & Garden: 70, 71, 72, 73, 100, 102, 104, 106, 122, 124, 126 (All up to SN: 400000); 800, 1000, 1200, 582 (All SN: 400001 & up), Replaces: 114499, 219753, 122403 (3/4"-16 NF x .444" tall) $2.95 Steering parts cont... IH/Farmall IH/Farmall IHS983 Price Steering parts cont... Steering parts cont... Order # ABC166 ABC2507 ABC1565 Price $105.65 $15.95 Description / Application Order # Steering Universal Joint w/ Yoke, Pins & Grease Fitting fits: H, M, MTA, Supers, F300, F350, 400, 450 (7/8" dia. shaft on both ends) USA made NOTE: To fit the above models the yoke must be cut from existing shaft & shaft drilled. Steering Shaft Cross & Bearing (U-Joint) Fits the following as a steering U-joint: B, C, H, M, MD & Supers, MTA, 200, 230, F240, F300, F340, F350, F400, 404, (424 & 444 both manual steering), F450, F460, F504, F560; Also fits the following as a tilt wheel U-joint: 706 thru 1568 Replaces: 52977DAX, 357439R91 NOTE: 1 to 4 used per tractor; Sold individually. ABC1417 FDS1274 Price $12.50 $37.45 $54.95 $13.25 IH/Farmall Lower Steering Shaft Oil Seal Fits: 200, 230, 240, F340, (F404, F504 when used w/ 350009R12 cover) Replaces: 360457R91 (2.750" I.D., 3.756" O.D., .438" wide) $15.50 Rubber Dust Cover / Umbrella fits: 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 4156, 4166, 4186; Hydros: 70, 86, 100, Replaces: 382587R1 NOTE: Fits under steering wheel & covers the orbit motor. ABC1414 $48.75 ABC1419 $4.95 IHS1418 $74.95 Power steering parts Order # Price ABC1233 $385.00 ABC3275 306 $18.50 Description / Application BACK IN STOCK! Belt Driven Power Steering Pump (For tractors using Eaton style pump) fits: IH models Replaces: 363185R91, Eaton P761, 20928, 503-1003, 503-1005-005 NOTE: For 5/818" male inverted flare pressure line. Can be adapted to tractors using CharLynn power steering w/ Eaton pump. Does not include brackets, reservoir or pulley. NEW! 10-pc. Eaton Power Steering Pump Seal & O-Ring Kit fits: H - 450 (All w/ Eaton belt driven power steering pump) NOTE: See website for all applications. Includes filter o-ring. Fits ABC1233 Pump. IHS1420 $79.95 IHS338 $10.25 Underside view IHS555 $885.00 Description / Application NEW! Power Steering Pump Filter Fits: H thru 450 (All using Eaton belt driven power steering pump) Replaces: 7304 (1.020" I.D., 2.990" O.D., 1.610" thick) USA made NOTE: Check website for additional application information. Reservoir gasket / o-ring not included. Power Steering Pump Pulley Fits: IH / Farmall models (5" O.D., 0.675" bore, 1/8" keyway, 0.9715" total width for 1/2" belt) USA made Power Steering Pump Pulley (For Tractors using Eaton style pump) (3.750" O.D., .671" bore, .125" keyway, .500" wide belt groove) NOTE: Cast iron. Power Steering Pump Port Block (For tractors using Eaton style pump w/ separate reservoir) fits: IH models Replaces: Eaton 20925, AG33547A USA made Order # IHS673 Price ABC380 (Original) Char-Lynn Power Steering Torque Generator w/out port block Fits: H, M, MTA & Supers, F300 thru 450 (7/8" shaft) IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM; Recommended Fluid Input - 3 to 4 GPM STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price $48.50 NEW! Tie Rod Tube w/ Ball End Fits: Cub (1947-64) w/ adjustable front axle (Does not fit LoBoys or High Clearance), Replaces: 350782R11 (14-11/16" o/a length) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. IHS3177 $48.50 NEW! Tie Rod Tube w/ Ball End Fits: Cub (1947-64) w/ non-adjustable front axle (Does not fit LoBoys) Replaces: 351387R11 (16 5/8" long, 1/2" - 20 NF thread) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. ABC497 (Economy) IHS3186 $68.50 NEW! Tie Rod Tube w/ Ball End Fits: Cub LoBoy SN: 4302 & up w/ adjustable front axle Replaces: 368094R91, 368095R91 (14-3/4" o/a length) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. IHS675 IHS3182 $68.50 NEW! Tie Rod Tube w/ Ball End Fits: Cub LoBoy only up to SN: 4801 w/ adjustable front axle, Replaces: 364081R11 (13-5/8" o/a length) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. IHS3184 $71.35 NEW! Tie Rod w/ Ball End Fits: Cub LoBoy up to SN: 4801 w/ non-adjustable front axle, & w/out automotive style tie rods Replaces: 364012R11 (1/2" - 20 NF thread, 17-9/32" o/a length) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. IHS3188 $71.35 NEW! Tie Rod w/ Ball End Fits: Cub LoBoy SN: 4802 & up w/ nonadjustable front axle, w/out automotive style tie rods, Replaces: 368087R11 (1/2" - 20 NF thread, 18-7/16" o/a length) NOTE: 2 used per tractor; Sold individually. Measure length before ordering. IHS3176 $12.95 IHS3180 $1.00 $112.50 $18.25 Char-Lynn Power Steering Slip Fit Coupler (For IHS555 Generator) ABC380: (3-3/8" to 3-1/2" adjustable length) ABC497: (2-5/8" o/a length) USA made $65.80 Char-Lynn Power Steering Mounting Bracket fits: M & Supers USA made IHS740 $223.35 Power Steering Priority Flow Control Valve fits: IH / Farmall models w/ LIVE hydraulics (1/2" NPT inlet, 3/8" NPT return, 1/2" NPT to remote cylinders) USA made NOTE: Eliminates belt driven pump, pulleys & brackets. Enables you to use your hydraulic pump to operate the power steering. Is preset at 1500 PSI & 8 gpm. Adjust to your application. Tie rods, parts Order # Price Description / Application IHS3169 $62.50 NEW! Tie Rod End Assembly Fits: Cub, Cub LoBoy, Replaces: 350779R1 (tie rod end), 350780R1 (seat), 350781R1 (seat set screw) (1/2" - 20 NF thread, 2.752" o/a length) USA made NOTE: Includes seat & set screw. 2 used per tractor; Sold individually. IHS3172 $29.50 NEW! Tie Rod Bar w/ Notches Fits: Farmall Cub (1947-64), IH Cub (1964-79) (Both w/ adjustable front axle) Replaces: 350778R1 (1/2" - 20 NF thread, 13-5/8" o/a length, 0.498" O.D., 5 notches) USA made NOTE: 2 used per tractor; Sold individually. Crankshaft Drive Pulley (For Power Steering) fits: M, Super M, MTA, 400, 450, W6 thru W450 gas, LP Replaces: Char-Lynn 5515 USA made Power Steering Reservoir Cap w/ Gasket Fits: M, MTA, Supers gas, diesel Replaces: 204827 (1-3/4" I.D., 1-3/8" tang to tang) NOTE: Has (2) tangs on top mounted from center out. Order # IHS3174 Port Block only (For IHS555 Generator) USA made Bolt (For ABC1414) Replaces: Eaton 14126 USA made NOTE: Yellow zinc; Grade 8. Belt Driven Power Steering Pump Bracket (For tractors using Eaton style pump) fits: M & Supers, MTA, 400, 450, W6 thru W450 gas, LP, Replaces: Eaton 20969 USA made NOTE: Bolts to LH side of engine above the governor. Description / Application $69.95 Tie rods, parts cont... IHS3179 $29.50 NEW! Tie Rod Bar w/ Notches Fits: Cub LoBoy (1955-68) w/ adjustable front axle, Replaces: 364080R1 (1/2" - 20 NF thread, 12-9/16" long, 5 notches) USA made NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application NEW! Tie Rod Clamp fits: Cub, Cub LoBoy, Replaces: 350784R1 NOTE: 2 used per tractor; Sold individually. NEW! Tie Rod Jam Nut fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 114496, 124934 (1/2" - 20 NF thread) USA made NOTE: 2 used per tractor; Sold individually. Tie rods, parts continue on next page 307 Chassis parts IHS682 ABC3277 Power steering parts cont... IH/Farmall Chassis parts Power steering parts cont... Tie rods, parts cont... Order # Price IHS2404 $17.50 IHS814 $52.50 Chassis parts $49.30 Order # JDS052 FDS315 308 $4.25 $24.95 $16.65 IHS894 Price Description / Application $16.50 $111.95 Tie Rod End Assembly fits: A, AV; (Super A, Super AV - both up to SN: 318309); C, Super C, Replaces: 43468D, 48280DB, 57875D USA made Tie Rod End fits the following w/ automotive type tie rod ends: Late Super A, AV SN: 318310 & up, C, Super C, 100, 130, 140, 200, 230, 385, 424, Some 454, 464, 484 w/ swept back axle w/ 44 - 72" axle or 48 - 80" axle, some 485, 495, some F504 Row-Crop, 574, 585, 595, 674, 695 w/ swept back axle, 784, 884, 885, 2424 IHS817: Replaces: 356540R91 (1/2" dia. thread; Stud taper - .560" to .630" (11/16" threaded R/H, 18 thread, 3.062" rom threaded end to grease zerk) IHS819: Replaces: 65077C91, 360412R11 (1/2" dia. thread; Stud taper - .560" to .630" (.750" dia. rod, 16" from end to grease zerk, 1/2" dia. threaded stud taper = .560" to .630")) NOTE: Check dimensions before ordering. JDS736 ABC265 Tie Rod Boot fits: C, Cub, Cub Loboy, Super A, Super AV, Super C, 100, 130, 140, 200, 230, 240, F340, F404, F424, F444; Also fits the following w/ swept back axles: 454, 464, 484, Replaces: 358209R1 (1.500" base, .735" tall, .550" base) NOTE: Check measurement prior to ordering. NEW! Inner Tie Rod End fits: H, M, MD, Supers, F300, F350, F400, F450 (All w/ factory IH wide front & tie rods behind the axle), Replaces: 359981R91 (.875" dia., RH thread, 3.875" threaded end to grease zerk) NEW! Front Tie Rod End fits: 300, 330, 340, 350, 460 Utilities Replaces: 363160R91, 365852R91 (.687" - 18 LH thread, 4.00" to center of post) IHS110 $21.75 (Inner threaded) IHS111 (Outer) $35.95 Order # NEW! Rear Tie Rod End fits: 300, 330, 340, 350, 460 Utilities Replaces: 363161R92, 365853R91 (.687" - 18 RH thread, 4.250" to center of post) Tie Rod Assembly fits the following Farmall w/ IH factory wide fronts Row crop models w/ tie rods behind center axle: 460, 544, 560, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586 (Can be modified to fit late H thru 450 if shorten length by approx. 1"), Replaces: 358979R91, 359569R91, 359986R1, 383917R1 (.762" at taper) NOTE: Will NOT fit Swartz/Speeco etc. aftermarket front axles. Check measurement prior to ordering. Tie Rod End fits: Same as IHS894 except individual parts will not fit H thru 450 IHS110: Replaces: 384006R92 (1" threaded R/H, 16 thread, 3.750" from threaded end to grease zerk, .762" at taper) IHS111: Replaces: 359984R93 (15-3/4" long, .920" dia., 6 notches, .762" at taper) NOTE: Will NOT fit Swartz/Speeco etc. aftermarket front axles. Check measurement prior to ordering. Price Description / Application Price $201.35 IHS196 $234.00 Front Pivot Bolster Bracket Fits: 240, 404, 424, 444, 2404, 2424, 2444 Replaces: Casting 369008R1 IHS031A (RH) $30.00 Bolster Pivot Pin fits: Same as IHS457 Replaces: 368604R11 (4-9/16" long, 1-3/16" dia) NOTE: Also fits 330 & 340. IHS031B (LH) $30.00 IHS938 (RH) $69.50 $18.50 Wide Front Axle Molded Rubber Bumper fits: Farmall C, Super C, 200, 230, Replaces: 352482R1 USA made NOTE: Sold individually. IHS056 $263.75 Wide Front Center Tube w/ Factory Bushings fits: Late H, M, MTA & Supers, F300, F350, 400, 450, 460, 544, 560, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256 (All Row-Crops & Hydro 70 w/ IH factory wide front & tie rods behind center tube) Replaces: 358976R31, 383926R21 (tube); 48841D (bushing) (4-1/2" O.D. tube, 3.90" I.D. tube, 42-1/2" o/a length)) IHS457 Order # IHS196A IHS296 $269.00 IHS457PIN $45.00 IHS055 $270.50 Lower Front Pivot Bolster fits the following w/ tie rods in the rear: M, MD, Super M, MTA, 400, 450, 544, 560, 656, 666, 686, 706, 756, 806, 826, 856, 1206, 1256, Hydro 70 w/ Factory IH wide front, Replaces: 383909R4 IHS936 (LH) $69.50 IHS202 $232.95 IHS728 $39.95 IHS1700 $14.95 Description / Application Upholstered Flip-Back Seat w/ Seat Lock Rod fits: A, B, Super A, 100, 130, Early 140; Will also fit IH 300, 350, 460 Utilities w/ low-style seat Replaces: 50570DC, 354157R92 USA made NOTE: Red/White. Upholstered in a vinyl cover. Upholstered Flip-Back Seat w/ Seat Lock Rod fits: A, B, Super A, 100, 130, Early 140; Will also fit IH 300, 350,460 Utilities w/ low-style seat Replaces: 50570DC, 354157R92 USA made NOTE: Silver. Upholstered in a nylon basket weave cover for original look. Improved color. Flat Leaf Seat Spring fits: A, B & Supers, 100, 130, 140; Also fits IH 300, 350, 460 Utilities w/ Low-Style seat IHS031A Replaces: 50587DB IHS031B Replaces: 50586DB Chassis parts IHS819 (Outer Notched) Description / Application Tie Rod End / Drag Link End Fits: 154, 184, 185 (inner / outer tie rod end & drag link ends), Replaces: 529430R1, 529431R1 (6 used, sold individually); Also fits some Cub Cadet '82' series, Replaces: 923-3015 Replaces: 923-3015 (1/2" - 20 NF thread, socket o/a length: 2-1/2", (male stud thread length: 1-1/8")) NOTE: See website for full applications. Seats, parts cont... IH/Farmall IH/Farmall IHS817 $24.95 (Inner threaded) Front axle parts Tie rods, parts cont... Seat Support Bracket fits: A, B & Supers, 100, 130, 140 USA made NOTE: Powder coat. Seats, parts Order # Tie rod boots IHS933 Universal Tie Rod Boot Fits: IH / Farmall models (Base x Height x Hole I.D.) Specify size when ordering FDS336 ABC371 FDS337 Price Description / Application $139.95 Toolbox & Seat Support fits: C, Super C w/out remote or fast hitch Replaces: 352086R91 USA made NOTE: Red powder coat. ABC369 ABC368 ABC370 Order # Price FDS336 $3.50 (1.200" base, .475" tall, .500" hole) ABC371 $3.35 (1.300" base, .965" tall, .500" hole) FDS337 $3.99 (1.450" base, .600" tall, .550" hole I.D.) ABC369 $2.95 (1.575" base, .600" tall, .650" hole) ABC368 $3.35 Fits: Same as IHS894 (1.675" base, .900" tall, .625" hole) ABC370 $3.50 Fits: Same as IHS110 & IHS111 Tie Rod Ends (1.800" base, .765" tall, .740" hole) IHS1502 $142.95 Dimension STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm ABC3211 $44.50 Toolbox & Seat Support fits the following w/ remote or fast hitch: C, Super C, 200, 230, Replaces: 356826R92, 359572R92, 360710R93 USA made NOTE: Red powder coat. NEW! Shallow Metal Seat Pan Fits: 10-20, 15-30, (F12 up to SN: 22236), F20 up to SN: 9759, F30 up to SN: 7632, W12 up to SN: 3252 Replaces: Serviceable for MB488, MB488B (17-1/2" wide, 14" front to back, 3" tall, 1/2" single bolt hole) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Upholstered Flip-Back Seat fits: H, HV, M, MV, MD, MDV, I4, W4, O4, OS4, Super W4, I6, ID6, I9, ID9, W6, WD6, O6, OS6, W9, WD9, WDR9, WR9S, Super WD9, Replaces: 49498D USA made NOTE: Silver. Seat Spring Coil fits: Same as IHS202 Replaces: 48930D (2-1/4" O.D., 4-3/4" tall) Seat Pivot Bracket Pin fits: Same as IHS202, Replaces: 51292DA USA made Seats, parts continue on next page 309 Seats, parts cont... Order # IHS1490 IHS029C IHS613 IHS614 Description / Application Seat Support Assembly fits: H, HV (both up to SN: 15697); M, MV, MD, MDV (All up to SN: 9286) Replaces: 51287DX, 51288DX, 51290DX, 51364D, 52436D USA made NOTE: Seat pedestal w/ pivot bearing, tool box, seat leg w/ handle,seat support w/ reinforcement, seat support bracket & 2 stops. Does not include hardware or springs. $145.95 $163.95 $145.95 $163.40 Order # Deluxe Upholstered Seat Pan (Attaches w/ 4 bolts) fits: Cub, Cub LoBoy, C, H, M, Supers, MTA, 200, 230, F240, F300, F340, F350, F400, F450, F460, 600, 650; Late F20, F30 w/ Monroe® Easy Ride seat, Replaces: 351880R92, 351925R93, 357518R91 USA made NOTE: Red/White. Upholstered in a vinyl cover. Deluxe Upholstered Seat Pan (Attaches w/ 4 bolts) Fits: Same as IHS029A Replaces: 351880R92, 351925R93, 357518R91 USA made NOTE: Silver. IHS977 IHS944 IHS030 IHS1309 Upholstered Seat Pan (Attaches w/ 4 bolts) Fits: Same as IHS029A Replaces: 351880R92, 351925R93, 357518R91 USA made NOTE: Black. Upholstered in a nylon basket weave cover for original look. Deluxe Upholstered Seat Pan w/ Brass Ring Drain Hole (Attaches w/ 4 bolts) Fits: Same as IHS029A Replaces: 351880R92, 351925R93, 357518R91 USA made NOTE: Red/White. $182.00 Deluxe Upholstered Seat Pan w/ Brass Ring Drain Hole (Attaches w/ 4 bolts) Fits: Same as IHS029A Replaces: 351880R92, 351925R93, 357518R91 USA made NOTE: Silver. IHS1249 IHS1252 MIS006B MIS006S Price $11.40 $7.50 $28.50 $5.95 $14.25 $4.95 $32.90 310 $4.95 Seat Pan Bolt Kit fits: Cub, Cub LoBoy, C, H, M, Supers, MTA, 200, 230, F240, F300, F340, F350, F400, F450, F460, 600, 650; Also fits late F20, F30 when equipped w/ Monroe® Easy Ride Seat Replaces: 103322, 181393, 114-308 (bolt), 81547 (lock washer) (7/16" NF x 3/4" long) Seat Mounting Plate Shoulder Bolt Fits: C thru W450; Also fits the following w/ standard seat: F460, F560, 660, Replaces: 352101R1, 358268R2 (1/2" x 20 N.F., 1-3/4" o/a length) USA made NOTE: Used to bolt seat base to battery box or toolbox. 4 used per tractor; Sold individually. Seat Spring Coil fits: C, H, M, Supers, MTA, 200, 230, 300, 350, 400, 450, 460, 560, 600, 650, 660; Also fits Late F20, F30, B, BN w/ Monroe® Easy Ride seat Replaces: 354670R2 Seat Locator Spring fits: C, Super C, Super H, Super M, Super MD, MTA, 200, 230, F300, F350, F400, F450, W400, W450, F460, 560, 600, 650, 660 Replaces: 352105R1 (1.325" x .660" dia) USA made Seat Locator Pin fits: Same as IHS1309 Replaces: 352600R91 (2.260" o/a length,1.500" O.D. big end, .499" O.D. pin) USA made NOTE: Zinc. 'C' Clip Retainer fits: Same as IHS1309 Replaces: 351128R1, 352122R1 USA made NOTE: 1 used per tractor. Order # IHS879 JDS272L JDS270 JDS274 IHS580 IHS578 Price Description / Application $247.50 Deluxe Seat Frame only fits: Cub, Cub LoBoy (Both w/ Deluxe Seat Assembly) Replaces: 364399R91 (Bracket = 16-1/2" c.c., 19-1/2" long x 14-1/2" wide) NOTE: Powder coat red. Will fit IHS580, IHS578, IHS861, JDS272L, JDS270 & JDS274 cushions. Mounting brackets NOT available from STP, Inc. $46.95 $68.95 $35.95 $48.50 $68.95 IHS861 $35.95 IHS664 $345.75 Red & White Tractor Seat Pad Fits: 21" Pan (side to side) (Foam pad, drawstring) USA made NOTE: New and Improved! $33.75 MIS006BK $33.75 Black Tractor Seat Pad Fits: 21" Pan (side to side) (Drawstring, 1-1/2" thick) USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Back Rest Seat Cushion fits: Cub, Cub LoBoy, 100, 130, 140, 300 Utility, 330, 350 Utility (All w/ deluxe seat assembly), Replaces: 363219R91 NOTE: Upholstered in black vinyl w/ brass rivets, steel backed. Bottom Seat Cushion (Wood bottom w/ original style springs & steel corner protectors) fits: Sames as JDS272L Replaces: 363220R91 NOTE: Black vinyl. Arm Rest Seat Cushion fits: Same as JDS272L, Replaces: 363740R91 NOTE: Upholstered in black vinyl, steel backed. Back Rest Seat Cushion fits: Cub, Cub LoBoy, 100, 130,140, 300 Utility, 330, 350 Utility (All w/ deluxe seat assembly) Replaces: 363219R91 NOTE: Upholstered in silver nylon basket weave w/ brass rivets, steel backed. Bottom Seat Cushion fits: Same as IHS580, Replaces: 363220R91 NOTE: Upholstered in silver nylon basket weave w/ wood bottom w/ original style springs. Arm Rest Seat Cushion fits: Same as IHS580, Replaces: 363740R91 NOTE: Upholstered in silver nylon basket weave, steel backed in a silver basket weave nylon with a steel back. Two used per seat; Sold individually. Order # IHS666 Price IHS665 $89.95 Description / Application $164.95 Bottom Cushion fits: Same as IHS664 Replaces: 371625R91 USA made IHS670 $332.00 IHS667 $313.95 IHS668 $86.95 IHS669 $164.35 Seat Cushion Assembly fits: 460, 560, 660 w/ Standard seat Replaces: 372759R92 USA made NOTE: Upholstered in red & white vinyl. Back rest & bottom cushions have steel cores. Like original Deluxe Seat Cushion Assembly w/ Metal Frame fits: Farmall 460, 560, 660 (All w/ Deluxe seats not Standard) Replaces: 372752R94 USA made NOTE: Like original. Back Rest Cushion fits: Same as IHS667 Replaces: 372755R93 USA made Bottom Cushion fits: Same as IHS669 Replaces: 379384R92 USA made IHS881 $320.95 IHS534 $162.90 IHS671 $75.00 IHS660 $33.75 (Restoration Quality) USA made (Economy) Deluxe Seat Cushion Assembly w/ Metal Frame fits: 200, 230, 240, 330, 340, IH 460, Replaces: 371625R1, 371626R1, 371627R91 USA made NOTE: Like original. Silver Tractor Seat Pad Fits: 21" Pan (side to side) (foam pad, drawstring) USA made Bottom view IHS1190 Description / Application Hydraulic Flip Seat Rear Hinge Pin Clips & Spacers fits the following w/ hydraulic flip back seat: C, H, M, MD & Supers, MTA, Late Super W6 series, 200, 230, F300, F350, 400, W400, 450, W450, 460, 560, 600, 650, 660 w/ standard seat, Replaces: 356892R2 (pin), 356893R2 (clip), 228280 (washer) (3/8" O.D. x 7" length) USA made Back Rest Cushion fits: Same as IHS664 Replaces: 371627R91 USA made Seat Cushion Set fits: Some Hydro 70, 86, 100, 504 Deluxe, 544 Row Crop, 574, 606, 656, 666, 686, (706 SN: 15678 & up), 756, 766, 786, (806 SN: 11549 & up), 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, (4186 SN: 19259 & up) Replaces: 387174R92, 387177R92, 400711R2 NOTE: Upholstered in a black & white vinyl. Back rest cushion is steel backed. Set includes: Bottom seat cushion, lower wrap around backrest & upper back rest. Brackets & bolts not included. Seat Cushion Support Plate Kit Fits: Some Hydro 70, 86, 100, 504 Deluxe, 544 Row Crop, 574, 606, 656, 666, 686, (706 SN: 15678 & up), 756, 766, 786, (806 SN: 11549 & up), 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, (4186 SN: 19259 & up) USA made Back Plate fits: Same as IHS671 Replaces: 387178R1 USA made Seats, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 311 Chassis parts Chassis parts IHS029B Price $228.95 Seats, parts cont... Seats, parts cont... IH/Farmall IH/Farmall IHS029A Seats, parts cont... Seats, parts cont... Order # IHS661 (LH) IHS662 (RH) IHS663 Price Seats, parts cont... Description / Application Order # $23.50 $33.75 IHS1620 Side Plate fits: Same as IHS671 IHS661 Replaces: 387172R1 IHS662 Replaces: 387173R1 USA made IHS931 (Front) Chassis parts IH/Farmall IHS1843 $24.50 Rubber Seat Spring fits: 504, 544, (F560 SN: 59010 & up), I560 SN: 5521 & up, 656, (I660 SN: 6873 & up), 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186; Hydro 100 (All w/ Mechanical Suspension) Replaces: 380712R1 NOTE: Does not come w/ bushings. You must reuse or purchase IHS648 bushing repair kit. Seat Bushing Repair Kit fits: Same as IHS343 USA made NOTE: For mechanical suspension seat, bushings must be reamed/honed when installed. IHS1655 (Rear) $39.50 ABC445 IHS885 (White) 312 $510.75 $52.50 Universal Full Suspension Seat w/ back rest & 5-angle base w/ slide track & mounting brackets fits: IH / Farmall models NOTE: Can be adapted to fit many utility tractors & lawn mowers. IHS329 MHS044 Seat Assembly w/ Arm Rests Fits: 756 thru 1568 series, Hydro 100; Serviceable for 706 thru 1206 Replaces: 400688R2, 400689R3, 400690R2, 400692R2, 400693R1, 400694R1, 400698R1 (Upholstered in black or white vinyl. 4" foam seat cushion. 2" foam back seat cushion. Has 'IH' indentation in metal back rest cover) USA made NOTE: Restoration quality. Drilled for 06, 26, 56 & 66 series mechanical or hydraulic seat. Must reuse (2) original front & rear horizontal mounting brackets from your original seat to mount. Seat Support Cover fits: 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 IHS931 Replaces: 398013R3 IHS1655 Replaces: 398015R2 IHS347 $34.50 $39.95 $41.20 Seat Shock Absorber fits: Late F20, Late F30 w/ Monroe® Easy Ride seat; H, HV, M, MD & MV w/ Rear mounted shock absorber, Replaces: 352587R92 (Center-to-center compressed = 111/2", fully extended = 18-1/8) USA made Seat Shock Absorber w/ Bushings Fits: B, BN when equipped w/ optional Monroe® Easy Ride seat, C, H, M, MTA & Supers, 200, 230, F300, F350, 400, 450, F460, F560 w/ standard seat; Super W6, SW6TA -both SN: 10001 & up; 600, 650, 660/ (All w/ standard seat) MHS044: (Center-to-center compressed = 6-1/4", fully extended = 8-1/4") IHS347: (Center-to-center compressed = 7-1/4", fully extended = 9-1/8") NOTE: Horizontal bolt hole at each end. IHS465 $2.05 EACH $139.30 Seat Adjustment Handle fits: Same as IHS343, Replaces: 372738R91, 372739R91 $8.50 $452.40 IHS646 IHS325 Rubber Seat Bumper fits: Same as IHS343, Replaces: 381238R1 IHS883 (Black) Price $9.65 $39.95 Seat Shock Absorber fits: H, M, MTA & Supers w/ Mid-mounted shock absorber, Replaces: 353204R93 (Overall compressed = 9-1/8", fully extended = 11) NOTE: Horizontal bolt at one end & stud at other end. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS533 IHS2368 IHS1120 IHS1122 $1.50 EACH $7.95 $24.50 $14.50 Description / Application Seat Shock Bolt fits: IHS329, IHS347, MHS044, IHS465 Shock Absorbers, W400, W450, 600, 650 Replaces: 351751R1 (7/16" NC thread, .625" shoulder, 2.380" o/a length) USA made Seat Shock Absorber w/ Hardware Fits: Some 460, 504, 544, 560, 656, 660, 666, 686, 706, 756, 766, 806, 826, 856, 966, Hydro 70, 86 & 100, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186 (All w/ Deluxe seats), Replaces: 372751R91 (7.815" o/a closed length, 3/8" NF thread, 10.420" o/a extended length) Rubber Seat or Shock Bushing (For Horizontal Bolt Hole) fits: Late F20, Late F30 w/ Monroe® Easy Ride seat; C, H, M, MTA & Supers, 200, 230, F-300, F-350, 400, 450, 460, 560, 600, 650, 660, Replaces: 72696R1, 250416R1 NOTE: 2 used per horizontal bolt; Sold individually. Rubber Seat Shock Bushing (For Stud) Fits: H, M, MTA & Supers Replaces: 353205R1 NOTE: 2 used per shock stud; Sold individually. Seat Adjusting Knob fits following w/ vertical acting deluxe seat: F504, F544, 656, 666, 686, 706 thru 1568 Replaces: 206286R1 (0.850" O.D., 0.494" I.D.) NOTE: Slides over lever (not threaded). Lower Shaft w/ Roll Pin at End Fits: 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186; Hydros: 70, 86, 100 (All w/ Suspension seat) Replaces: 380723R1 (6" long, 3/4" dia.) USA made NOTE: Steel. Upper Shaft w/ Pin in Center Fits: 504, 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4100, 4156, 4166, 4186; Hydros: 70, 86 & 100 (All w/ Suspension seat) Replaces: 380722R1 (5-3/4" long, 3/4" dia.) USA made NOTE: Steel. Order # Price Description / Application IHS979 $31.40 Upper Shock Bolt Spacers & Tube Assembly fits the following w/ MHS044, IHS347 style shock: C SN: 36426 & up, H, M, MD & Supers, MTA, Late Super W6 series, 200, 230, F300, F350, 400, 450, W400, W450; Fits the following w/ standard seat: 460, 560, 600, 650, 660, Replaces: 361033R91; 181413 (bolt); (2) 354731R1 (spacers); 354730R1 (tube); 354732R1 (nut) (7/16" NF x 3-7/16" length bolt, (2) 5/8" thick spacers, 2-3/16" length tube) USA made ABC537 $14.30 Seat Bearing (For Knoedler Seats) Fits: IH / Farmall models, B, BN, F20, F30, H, M w/ Knoedler aftermarket seats USA made NOTE: 2 to 8 used per tractor; Sold individually. MHS046 $24.95 IHS584 $19.95 3-1/2" Seat Pivot Support Rod Fits: C, H, M, MTA & Supers, (Super W6 SN:10001 & up), W6TA series, 200, 230, F-300, F-350, 400, 450, 600, 650, some 460, 560, 660, Replaces: 355753R1 USA made NOTE: Includes (2) flat washers, (2) rubber bushings, (2) #5 bolts. Exact of original. IHS585 $22.90 6" Seat Pivot Support Rod fits: H, M & Supers, Replaces: 352648R1 NOTE: Includes (2) flat washers, (2) rubber bushings & (2) #5 bolts. Exact of original. IHS325 $2.05 EACH Rubber Bushing only (For MHS046, IHS584, IHS585 Support Rods) Replaces: 72696R1, 250416R1 NOTE: 2 used per horizontal bolt; Sold individually. Seat Pivot Support Rod fits: Late F20, Late F30 w/ Monroe® Easy Ride seat (4" wide) USA made Fenders, parts NOTE: Same gauge, weight & material as original. For best results fit fenders to tractor before painting. Order # Price Description / Application IHS573 $114.95 Fender fits: Cub, Cub LoBoy Replaces: 350961R12 NOTE: LH & RH are the same; Sold individually. IHS363 $115.00 Fender fits: A, AV, B, BN Replaces: 51179DX NOTE: LH & RH are the same; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fenders, parts continue on next page 313 Chassis parts JDS533 $24.95 Order # ABC526 Seats, parts cont... IH/Farmall IHS648 $39.50 $6.45 $49.95 Description / Application $28.95 Seat Support Rear Cover fits: 706, 806, 1206, 2706, 21206, Replaces: 383175R1 USA made Seat Hardware Kit fits: Same as IHS671 IHS343 Price Seats, parts cont... Fenders, parts cont... results fit fenders to tractor before painting. Order # Price IHS576L (LH) $149.50 IHS576R (RH) $149.50 Fenders, parts cont... Fenders, parts cont... NOTE: Same gauge, weight & material as original. For best Description / Application Fender fits: Super A, Super AV, 100, 130, 140 IHS576L Replaces: 350608R1 IHS576R Replaces: 350609R1 Order # Price IHS710L (LH) $286.50 IHS710R $286.50 (RH) Description / Application Flat Top Fender Skin w/ Grommet (2-Light Style) fits: 544, 656, 706, 756, 806, 826, 856, 1026, 1206, 1256, 1456; Will also fit 766 & up if 4-light fenders are ordered IHS710L Replaces: 399328R2 IHS710R Replaces: 399329R2 Order # Price IHS755 (LH) $44.95 IHS756 (RH) $44.95 Toolboxes, light bar, parts Description / Application Platform Extension Plate fits: 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568 USA made Order # Price ABC308 $40.75 ABC472 $32.50 IHS385 $35.00 IHS245 IHS3155 (LH) Fender fits: Farmall C Replaces: 351248R91 NOTE: LH & RH are the same; Sold individually. IHS358 Description $156.00 IHS356 $13.75 IHS3157 (RH) IHS364B Bolt (U-Shaped) w/ Hex Nuts & Washer Fits: C, Super C, 200, 230, 240, 404; Will fit IHS357, IHS358 Fenders Replaces: 351250R1 NOTE: 1 needed per fender; Sold individually. IHS707 (LH) $170.00 IHS709 (RH) $170.00 $141.00 $59.95 IHS707 IHS709 IHS708 $24.95 Fender Extension Kit (For IHS356) USA made NOTE: Includes: (2) mounting plates, (8) bushings, (8) long bolts, (8) short bolts, (16) washers, (8) nuts. JDS299 $2.50 Bushing only (For IHS356) Replaces: 51502D (0.533" I.D., 0.840" O.D., 1.12" long) USA made 314 $285.00 Flat Top Fender (1-Light Style) Fits: 666, 686, 766, 966, 1066, 1466, 1468, 1566, 1568; Hydros: 70, 86, 100 IHS3155 Replaces: 533187R1 IHS3157 Replaces: 533188R1 $6.15 Mounting Bracket Fits: IHS710L, IHS710R, IHS1355, IHS1357 Fenders IHS707 Replaces: 391992R91, 399335R1 IHS709 Replaces: 391993R91, 399336R1 U-Bolt w/ Hardware (For IHS707, IHS709) (Will not fit 544, 656) Replaces: 388944R2, 584253R1 (flat washer), 103326 (lock washer), 220081 (nuts) USA made NOTE: U-Bolt has 3/4" dia. & (2) required per tractor; Sold individually. Includes (2) heavy flat washers, (2) lock washers, (2) nuts. Fender Grommet fits: 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Replaces: 388940R1 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price LH Grab Handle...................................................IHS245..............$39.95 Toolbox fits: Cub w/ Deluxe seat, Cub LoBoy, Replaces: 364072R91 USA made NOTE: Bare steel. IHS369 $66.95 IHS933 $139.95 IHS1502 $142.95 IHS374 $99.95 IHS686 $9.00 DEC448 $5.99 IHS232 $74.50 RH Grab Handle..................................................IHS246..............$39.95 Step assemblies - USA made Order # IHS711 Fender fits: H, M, MTA & Supers, 300, 350, 400, 450, Replaces: 51500DB NOTE: LH & RH are the same; Sold individually. IHS364 $29.50 IHS246 Fender fits: Super C, 200, 230 Replaces: 351248R92 NOTE: LH & RH are the same; Sold individually. IHS359 $285.00 IHS1633 Price $54.95 IHS711EX $59.75 IHS228 (LH) $78.95 IHS229 (RH) $78.95 IHS228 IHS1909 Description / Application Mounting Step fits: Cub, Cub LoBoy Replaces: 368578R11 NOTE: Primer. Mounts approximately 4" below in front of platform. Mounting Step (Extended Drop) Fits: Cub, Cub LoBoy NOTE: Primer. Mounts approximately 8" below in front of platform. Aftermarket part. Double Step Assembly fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 IHS228 Replaces: 395230R1 IHS229 Replaces: 395123R1, 23977DB, DC, DD USA made IHS229 $268.50 LH Auxiliary Step Assembly Fits: 706 thru 1568 (All w/out cabs) USA made NOTE: Powder coated red. Toolbox fits: A, B, BN, Super A, 100, 130, 140, Replaces: 43527DAX NOTE: Fits under flip-back seat. Toolbox & Seat Support fits: C, Super C w/out remote or fast hitch Replaces: 352086R91 USA made NOTE: Red powder coat. Toolbox & Seat Support fits the following w/ remote or fast hitch: C, Super C, 200, 230, Replaces: 356826R92, 359572R92, 360710R93 USA made NOTE: Red powder coat. Toolbox fits: H, M, MTA, MD & Supers Replaces: 999760R91 NOTE: Includes IHS686 brackets & (1) DEC448 lid decal. Light bar mounted. Brackets only (For IHS374 Toolbox) NOTE: Clamps toolbox to light bar. Sold in pairs. Decal only (For IHS374 Toolbox lid) USA made Light Bar only fits: H, M, MD, MTA, Supers, Replaces: 51675DC USA made Toolboxes, light bar, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 315 Chassis parts Chassis parts $156.00 Universal Toolbox fits: IH models (4" wide x 16" long x 4-1/4" tall) IH/Farmall IH/Farmall IHS357 Universal Toolbox fits: IH models (11" long, 4" wide, 4-1/2" tall, Bolt holes center to center = 5-1/2") Toolbox w/ Standard Seat fits: Cub, Cub LoBoy w/ standard seat Replaces: 351014R91 Grab handles - USA made Fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568 (All w/ Gear Drive) IHS245 Replaces: 397890R2 IHS246 Replaces: 399306R2 Description / Application Toolboxes, light bar, parts cont... Order # Price $13.95 U-Bolt Set only fits: H, M, MD, MTA, Supers, Replaces: 59468D NOTE: Includes: (2) U-bolts, (4) nuts, (4) washers. Mounts headlight bar to steering column. IHS2517 $12.50 Toolbox Latch & Spring Assembly Fits: F544, F656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros 70, 86, 100, Replaces: 27452D (spring), 383114R1 (latch) Description / Application Order # Price Description / Application Order # Price Description / Application $7.95 Brake Pedal Return Spring fits: H, M (both w/ band brakes), Replaces: 48599DA (8-1/8" o/a length) USA made NOTE: 2 used per tractor; Sold individually. IHS3066 $69.95 JDS1222 $13.50 IHS873 $9.95 Brake Pedal Return Spring fits: Super H, Super M, Super O6, Super W6 series; F300, F350, 400, 450, F460, 560, 660 Replaces: 357164R1 (3.850" o/a length) USA made NOTE: 4 used per tractor; (2) brake pedal, (1) clutch pedal, (1) TA handle; Sold individually. Brake Lock Assist Attachment Fits: Super M SN: F28175 & up or L504802 & up w/ hydraulic reservoir under fuel tank, Super MTA series USA made NOTE: Bolts to hydraulic pump control rod bracket under light bar. Instructions & complete hardware included. Brake Pedal Shaft Seal fits: C, H, M, MTA, W4, W6 & Supers, 200, 230, 240, 300, 330, 340, 350, 400, 404, 450, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686; Hydros: 70, 86 Replaces: 380959R91 (1.125" I.D., 1.832" O.D., 0.250" wide) NOTE: 2 used per tractor; Sold individually. IHS3259 $69.95 IHS2692 Floor mat Price $18.95 Floor Mat................................................................IHS2221....... $175.95 NOTE: Consists of a heavy duty 3/8" rubberized closed cell foam base w/ a 1/8" durable textured rubber top. Between these two layers is a PVC sound-deadening barrier. This industrial grade matting will provide years of use in high wear conditions while maintaining its sound and vibration dampening qualities. $12.95 IHS1581 $12.75 IHS148 $12.50 Brake parts Order # IHS222 Price Description / Application $59.95 Brake Cover fits: F12, F14, W12 Replaces: 23664DX USA made IHS014 IHS3067 $34.80 $8.50 Brake Drum fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 350805R2 IHS880 IHS701 IHS804 316 $5.95 $14.95 $12.85 Brake Pedal Return Spring (Clutch Pedal Spring) fits: Cub, Cub LoBoy Replaces: 350951R1 (4-1/2" o/a length) USA made NOTE: 3 used per tractor; Sold individually. Brake Pedal Return Spring (Clutch Pedal Spring) fits: A, B, Super A, 100, 130, 140 Replaces: 47845DA (7" o/a length) USA made NOTE: 3 used per tractor; Sold individually. Brake Pedal Return Spring (Clutch Pedal Spring) fits: C, Super C, 200, 230 Replaces: 351210R1 (5-3/4" o/a length) NOTE: 3 used per tractor; Sold individually. IHS3058 IHS3062 $69.95 $69.95 Brake Pedal Return Spring fits: 756, 766, 826, 856, 966, 1026, 1066, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100 Replaces: 59315D (.8735" spring O.D., .095" wire dia.) USA made NOTE: 2 used per tractor; Sold individually. Brake Pedal Return Spring fits: 4100, 4156, 4166, Replaces: 626206R1 (4.463" o/a length, .083" wire dia, .744" spring O.D.) USA made Brake Pedal Set Screw fits: A, B, Super A, 100, 130, 140, Replaces: 43528D (1/2"-13 NC) USA made Brake Pedal Pawl Pin fits: C, H, M, Supers, MTA, I4, I6, W4, W6, 200, 230, F300, F350, 400, 450, F460, 560, 660 Replaces: 49209D USA made NOTE: Zinc plated. Brake Lock Assist Attachment Fits: H, HV, (Super H up to SN: 19233 w/ out hydraulic reservoir under the fuel tank) USA made NOTE: Bolts to the hydraulic pump control rod bracket under the light bar. Includes instructions & complete hardware. Brake Lock Assist Attachment Fits: M, MD, MV, MDV, (Supers up to SN: F28174 & L504801 w/out hydraulic reservoir under fuel tank) USA made NOTE: Bolts to hydraulic pump control rod bracket under light bar. Will not fit tractors with shutters or without the hydraulic control rod bracket. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm NEW! Brake Lock Assist Attachment Fits: F300 Row Crop SN: 7209 & up; Serviceable for F300 SN: 501 - 7208, F350 Row Crop USA made IHS3070 $69.95 Brake Lock Assist Attachment Fits: F400, F450 USA made NOTE: Bolts to lower dash panel. Includes instructions & complete hardware. IHS1373 $63.15 IHS1374 $63.15 Clutch & Brake Pedal Shaft fits: Super C, 200, 230 (All w/ disc brakes) Replaces: 355971R1 (19.57" long, 1.130" dia) USA made IHS1375 $63.15 Clutch & Brake Pedal Shaft fits: H, HV (both up to SN: 391357 & w/ band brakes) Replaces: 50170DA (22.56" long, 1.130" dia) USA made IHS1376 $63.15 IHS1372 $63.15 IHS1371 IHS1370 $63.15 $63.15 IHS688 $5.95 IHS690 $5.95 IHS2817 $9.95 Rubber Brake Boot / Dust Cover (For Disc Brakes) fits: 354, 364, 384, 424, 434, 444, (B414 SN: 31375 & up), 2300A, 2424, 2444, (3414 SN: 3516 & up) Replaces: 3064173R1 NOTE: 2 slotted openings. IHS692 $9.95 Rubber Brake Boot / Dust Cover (For Disc Brakes) fits: 460, 504, 544, 560, 606, 656, 660, 664, 666, 686; Hydros: 70, 86 Industrials: 2504, 2544, 2606, 2656 Replaces: 368299R1 Clutch & Brake Pedal Shaft fits: C Replaces: 351212R1 (19.95" long, 1.130" dia.) USA made Clutch & Brake Pedal Shaft fits: H, HV (both SN: 391358 & up), Super H, Super HV, Super W4, 300, 330 & 350 Row-Crop & Utility (All w/ disc brakes) Replaces: 358051R1 (22.20" long, 1.130" dia) USA made Clutch & Brake Pedal Shaft fits: M, MV (both up to SN: 294225); MD, MDV (both up to SN: 285504) (All w/ band brakes) Replaces: 50079D (25.12" long, 1.130" dia.) USA made Clutch & Brake Pedal Shaft fits: M, MV (both SN: 294226 & up); MD, MDV (both SN: 285505 & up); Super M, MTA, Super W6, W6TA, 400, 450, W400, W450 (All w/ disc brakes), Replaces: 357046R1 (24.94" long, 1.130" dia) USA made NEW! Brake Pedal Shaft Seal fits: W9, WD9, WR9, WDR9, Supers, 600, 650 Replaces: 43509D, 938294R91 (1.375" I.D, 2.130" O.D., 0.437" wide) Rubber Brake Boot / Dust Cover (For Disc Brakes) fits: Late H SN: 391358 & up, Super C, Super H, 200, 230, 240, 300, 330, 340, 350, Super W4, OS4 Replaces: 355976R1 Rubber Brake Boot / Dust Cover (For Disc Brakes) fits: Late M SN: 294226 & up, Super M, MTA, Super W6, OS6, 400, 450, Replaces: 357044R1 Brake riveting tool kits - USA made Order # Price MIS1131 $33.95 MIS2547 $89.95 Clutch & Brake Pedal Shaft fits: 560, 660 Replaces: 374850R1 (24-3/4" long, 1.130" dia.) USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Application (1-1/4" throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Mounts into vice. Not for use w/ deep recess shoes. (For brake shoe & disc relining for most tractors) (3-3/8" deep throat x 2-1/8" high throat) NOTE: Includes 2 punches. 317 Chassis parts Chassis parts IHS1576 Price Brake Spring fits: W4, W6, WD6 Replaces: 53182D (8.488" o/a length, 0.685" O.D., 0.078" wire dia.) USA made NOTE: 2 used per tractor; Sold individually. ABC2039 $7.95 IH/Farmall IH/Farmall (For tractors w/ Deluxe Red IH Cab) Fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 536768R2 USA made Order # Brake parts cont... IHS687 Order # Description / Application IHS535 Description Brake parts cont... Brake parts cont... Bonded brake discs, parts cont... Lined brake bands NOTE: (1) lined brake band per wheel; (2) required per tractor; Sold individually. Order # Price ABC337 $45.75 EACH ABC269 $38.95 EACH ABC110 $52.15 EACH $46.15 EACH IHS612 $56.45 EACH ABC262 $68.75 EACH Price Description / Application Order # Price Description / Application Order # $15.00 EACH Riveted Brake Disc fits: Late H SN: 391358 & up, Super H, Super HV, SW4, 300, 350 Row-Crop & Utility (All w/ factory IH disc brakes), Replaces: 368183R91, 385195R91, 1975457C2 (5-5/8" dia., 10 spline, 1-7/8" spline I.D) NOTE: 4 used per tractor; Sold individually. IHS1136 $5.75 EACH Disc Brake Actuating Spring fits: 354, 364, 384, B-414, 424, 434, 444, 2424, 2444 Replaces: 3066876R1 (1.188" o/a length, .825" O.D., .110" dia. wire) NOTE: Sold individually. ABC1510 $16.95 ABC1225 $2.15 EACH Disc Brake Ball fits: B250, B275, B414, H, HV, M, MD, Super C, Super H, Super HV, Super M, Super MTA, 200, 230, 240, 300, 330, 340, 350, 354, 364, 384, 400, W400, 404, 424, 444, 450, W450, 460, 504, 544, 560, 606, 660, 656, 2404, 2504, 2606, 2656, 3414; IH Combines: 101, 151, 181 Replaces: 09384AB, 16028R1, 16779X, 17028R1 (7/8" dia. steel ball) NOTE: Sold individually. IHS1518 $7.80 Rear Axle Housing Oil Pan Gasket Fits: Cub, Cub LoBoy, 154, 184, 185 Replaces: 350827R1 USA made NOTE: 2 used per tractor; Sold individually. IHS1516 $18.25 Final Drive Gasket Set fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 350804R1, 350820R1, 350823R1, 350827R1 USA made NOTE: Kit contains (1) rear axle housing oil pan gasket, (1) outer seal cap gasket, (1) inner axle bearing cap gasket, (1) upper differential shaft gasket. 2 used per tractor; Sold individually. IHS3024 $7.50 Rear Axle Housing Oil Pan Gasket Fits: A, Super A, B, BN, 100, 130, 140 Replaces: 43245D USA made NOTE: 2 used per tractor; Sold individually. IHS2365 $18.95 Bonded Brake Disc fits: IH 354, 364, 384, 424, 434, 444, B414 SN: 31375 & up, 2300, 2424, 2444, 3414, 3444 Replaces: 395161R1, 1975464C2, 3064170R91 (6-1/2" dia., 10 spline, 1-5/8" spline I.D) NOTE: 4 used per tractor; Sold individually. 4-piece Final Drive Gasket Kit Fits: A, Super A, B, BN Replaces: 43245D, 47954D, (2) 48009DB USA made NOTE: Includes (1) rear axle housing oil pan gasket, (2) rear axle outer bearing retainer gaskets, (1) rear axle housing inner bearing cap gasket. 2 used per tractor; Sold individually. ABC1503 $7.85 Bonded Brake Disc fits: 560, 660 Replaces: 369079R92, 1975446C3 (7" dia., 12 spline, 2-1/4" spline I.D) NOTE: 4 used per tractor; Sold individually. ABC2819 $12.95 Bonded Brake Disc fits: 656, 664, 666, 686; Hydros: 70, 86, Replaces: 391445R1, 1975463C2, 1975463C3 (6-1/2" dia., 10 spline, 3-1/2" hub) NOTE: 4 used per tractor; Sold individually. Inner Differential Bearing Retainer Seal Fits: Cub, Cub LoBoy, 154, 184, 185 Replaces: 385872R91 (1.832" O.D., 1.062" I.D., 0.250" wide) NOTE: 2 used per tractor; Sold individually. Mounts in 3-bolt retainer. IHS2356 $8.95 Felt Washer fits as a rear stub axle felt washer: A, Super A, B, BN (2 used per tractor, sold individually); Also fits as a differential counter shaft bearing felt washer: F20 & Regular (4 used per tractor, sold individually) Replaces: 15017D, 43242D (2.920" O.D., 2.000" I.D., 0.375" wide) USA made IHS826 Fits: Cub SN: 173601 & up, Cub LoBoy, 154, 184, 185, Replaces: 358753R21 NOTE: Brake rod unpins from lining. ABC453 $9.90 EACH $16.50 EACH Fits: Super A SN: 339642 & up, 100, 130, 140, Replaces: 358660R1 NOTE: Brake rod unpins from lining. Fits: C, Replaces: 351624R92 NOTE: Brake rod unpins from lining. IHS828 $11.95 EACH Fits: H, HV (both up to SN: 391357), I4, O4, W4, Replaces: 58344DCX (2" wide) NOTE: Brake rod unpins from lining. Fits: M, MV up to SN: 294226, MD up to SN: 285505, I, O, W6 series Replaces: 58345DCX (2" wide) NOTE: Brake rod unpins from lining. ABC561 $7.50 EACH Bonded brake discs, parts NOTE: Check dimensions on discs before ordering. Order # Price ABC426 $15.00 EACH IHS986 318 $9.80 EACH Description / Application Riveted Brake Disc fits: Super C, 200, 230, 240, 330, 340 gas, 404, 2404 Replaces: 356071R91, 368181R92, 368983R91, 1975456C2 (5" dia., 10 spline, 1-5/8" spline I.D.) NOTE: 4 used per tractor; Sold individually. Adjusting Bolt (For Disc Brakes) Fits: Super C, 200, 230, Replaces: 355977R1 (3/8" - 24 UNF x 4.450) USA made NOTE: 2 used per tractor; Sold individually. IHS823 $6.95 EACH Adjusting Bolt (For Disc Brakes) fits: Late H SN: 391358 & up, Super H, Super HV, SW4, 300 & 350 Row-Crop & Utility (All w/ factory IH disc brakes) Replaces: 358050R1 (3/8" - 24 UNF x 4.25) USA made NOTE: 2 used per tractor; Sold individually. Riveted Brake Disc fits: Late M SN: 294226 & up, Super M, (Late MD SN: 285505 & up), Super MD, Super MV, Super MDV, MTA, SW6, Super WD6, Super W6TA, Super WD6TA, 400, W400, 450, W450 (All w/ factory IH disc brakes) Replaces: 368179R91, 121961C91, 1963810C2 (6-1/2" dia., 12 spline, 2-1/4" spline I.D) NOTE: 4 used per tractor; Sold individually. Adjusting Bolt (For Disc Brakes) Fits: Late M SN: 294226 & up, Super M, (Late MD SN: 285505 & up), Super MD, Super MV, Super MDV, MTA, SW6, Super WD6, Super W6TA, Super WD6TA, 400, W400, 450, W450 (All w/ factory IH disc brakes), Replaces: 357040R1 (7/16" - 20 UNF x 4.50) USA made NOTE: 2 used per tractor; Sold individually. Actuating Spring (For Disc Brakes) Fits: H, HV (both Behlen & IHC); Super C, Super H, series, 200, 230, 240, 300, 330, 340, 350, 404, 460, 504, 544, 606 Replaces: 354627R1 (1.275" o/a length, .105" wire dia. ) NOTE: 4 used per tractor; Sold individually. Actuating Spring (For Disc Brakes) Fits: Late M SN: 294226 & up, Super M, (Late MD SN: 285505 & up), Super MD, Super MV, Super MDV, Super MTA, SW6, Super WD6, Super W6TA, 400, W400, 450, W450, 560, 656, 660, 664, 666, 686; Hydros: 70, 86 (All w/ factory IH disc brakes) Replaces: 357116R1, 619731C1 (1.209" o/a length, 0.105" wire dia., 0.761" O.D.) USA made NOTE: 6 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm ABC2713 $2.50 EACH ABC434 ABC430 ABC432 IHS1484 ABC442 $18.25 EACH $17.50 EACH $19.95 EACH $18.95 EACH $21.95 EACH Price Disc Brake Ball fits: WDR9, WR9S, Super WD9, 600, 650, Replaces: 16100R1 (1" dia. steel ball) NOTE: Sold individually. Bonded Brake Disc fits: 340 diesel, 460, 504, 606; Serviceable for 544, not sintered) Replaces: 368292R92, 1975460C2; Serviceable for 1975462C3, 404918R91 (6" dia., 10 spline, 1-7/8" spline I.D) NOTE: 4 used per tractor; Sold individually. Bonded Brake Disc fits: Super W9, Super WD9, WR9S, 600, 650, 706, 756, 766, 806, 826, 856, 966, 1026, 1066 Hydro, 1206, Hydro 100, Replaces: 359853R91, 384166R91, 1975468C2 (8" dia., 12 spline, 2-1/4" spline I.D) NOTE: 4 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Outer Rear Axle Seal fits: Cub, Cub LoBoy, 154, 184, 185 Replaces: 350822R91,2, 358799R1, 547431R91 (3.066" O.D., 2.125" I.D., 0.510" wide) NOTE: Must reuse seal retainer. Final Drive Upper Pinion Shaft Seal Fits: Cub, Cub LoBoy, 154, 184, 185 Replaces: 381907R91 (1.625" I.D., 2.441" O.D., .312" wide) USA made Final drive parts continue on next page 319 Chassis parts Chassis parts IHS689 $65.95 EACH Order # ABC428 Fits: Cub up to SN: 173600 Replaces: 350967R21 NOTE: Brake rod attached to lining. Fits: A, B, BN, (Super A up to SN: 339641) Replaces: 51582DDX NOTE: Brake rod attached to lining. Final drive parts IH/Farmall IH/Farmall IHS231 Application Bonded brake discs, parts cont... Final drive parts cont... Order # Description / Application Order # ABC1632 $12.95 Rear Outer Flanged Axle Seal fits: A, Super A, B, BN, Replaces: 43283D, 358767R91 (2.125" I.D., 3.001" O.D., 0.434" wide) NOTE: 2 used per tractor; Sold individually. ABC1503 $7.85 ABC1512 $19.60 RH Seed Drive Plate Seal on final drive Fits as a Cub & Seed Drive Plate Seal on final drive for A, Super A, 100, 130, 140 Replaces: 382220R91, 53599D (2.632" O.D., 1.750" I.D., .500" wide) USA made Bull Pinion Shaft Bearing Retainer Seal Fits: B250, B275, B276, B414, 354, 364, 384, 424, 434, 444, 2424, 2444, 3414 Replaces: 703907R91, 703908R92, 3043788R92 (1.625" I.D., 2.441" O.D., .312" wide) USA made ABC3201 $18.50 NEW! Bull Pinion Shaft Bearing Retainer Seal fits: I, O, W, 6 & 9, (M up to SN: 294225), (MD up to SN: 285504) (All w/ band brakes), Replaces: 45073D, 610870C92 (2.875" I.D., 3.756" O.D., 0.438" wide) NOTE: 2 used per tractor; Sold individually. ABC2689 ABC2648 ABC3194 ABC3196 IHS3084 320 $9.30 $17.50 $15.75 $24.50 $18.50 $8.75 Final Drive Differential Bearing Retainer Oil Seal fits: A, B, Super A, 100, 130, (140, but wider), Replaces: 46282D, 385865R91, 71597C91 (2.378" O.D., 1.531" I.D., 0.500" wide) NOTE: 2 used per tractor; Sold individually. Mounts in 6578D retainer. Upper Differential Shaft Seal fits: A, AV, Super A, Super A1, Super AV, Super AV1, B, BN, 100, 130, Replaces: 358786R91, 358825R91 (2.000" I.D., 2.879" O.D., 0.312" wide) NOTE: Mounts in final drive axle housing. Seal is approx. .060" narrower than original. NEW! Final Drive Flanged Axle Outer Seal fits: 100, 130, 140 Replaces: 362767R91 (seal), 362777R1 (felt washer), 363771R91 (seal), 536144R91 (seal) (2.375" I.D., 3.255" O.D., 0.500" wide) USA made NOTE: 2 used per tractor; Sold individually. Bull Pinion Shaft Bearing Retainer Oil Seal fits: Super C, 200, 230, 240, 330, (340 gas, LP), 404, 2404, Replaces: 380922R91 (2.754" O.D., 1.750" I.D., 0.500" wide) NOTE: 2 used per tractor; Sold individually. NEW! Bull Pinion Shaft Bearing Retainer Seal fits: C, Replaces: 70201C1, 351108R91 (2.125" I.D. x 3.355" O.D. x 0.438" width) NOTE: 2 used per tractor; Sold individually. NEW! Bull Pinion Shaft Bearing Retainer Seal fits: (H, HV up to SN: 391357), I4, O4, OS4, W4, Replaces: 48498D, 76510C91 (2.313" I.D. x 3.505" O.D. x 0.313" width) NOTE: 2 used per tractor; Sold individually. NEW! Bull Pinion Shaft Bearing Retainer Seal fits: H SN: 391358 & up, Super H, 300, (340 diesel), 350, 460, 504, 544, 606, 656, 664, 666, 686, Hydro 70, Hydro 86 Replaces: 20290D, 383159R91, 3108650R91 (1.875" I.D., 2.875" O.D., 0.313" wide) USA made NOTE: 2 used per tractor; Sold individually. ABC3203 $14.95 Description / Application NEW! Bull Pinion Shaft Bearing Retainer Seal fits: (M SN: 294226 & up w/ disc brakes), MD SN: 28505 & up w/ disc brakes, Super M, Super MD, MTA, Super W6, Super WD6, W6TA, WD6TA, 400, 450, W400, W450, 560, 660 Replaces: 1699480C91 (2.250 I.D. x 3.256" O.D. x 0.375" width) NOTE: 2 used per tractor; Sold individually. ABC1562 $10.60 Rear Axle Seal fits the following w/ 2-1/2" O.D. axle: H & Supers, Some F300, F350, F330, F340, F460 up to SN: 26549 Replaces: 43722D, 358770R91, 360251R91, 377786R1,2 (3.548" O.D., 2.500" I.D., .438" wide) ABC3207 $18.50 NEW! Rear Axle Seal fits: C, Super C, 200, 230, 240, Replaces: 60254D, 610867C92 (2.313" I.D. x 3.256" O.D. x 0.438") NOTE: 2 used per tractor; Sold individually. ABC1565 ABC3335 $13.25 $26.50 Rear Axle Seal fits the following w/ 2-3/4" O.D. rear axle:M, MD & Supers, MTA, Late F300, F350, 400, 450, (F460 SN: 26550 & up), F504, I504, F544, 560, 656, 666, 686; Hydros: 70, 86 Replaces: 48776D, 358780R91, 358819R91, 57085D (2.750" I.D., 3.756" O.D., .438" wide) NEW! Rear Axle Outer Seal fits: 1566, 1568, 1586, (4786 front & rear axles) Replaces: 67256C1 (4.250" I.D., 5.250" O.D., 0.438" wide) USA made Bull pinions Order # IHS200 Price $248.50 Description / Application RH Bull Pinion fits: 1086, 1486 Replaces: 104680C1 NOTE: Hollow, w/ diff. lock. Close out. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # IHS201 Price $248.50 Description / Application LH Bull Pinion fits: 1086, 1486 Replaces: 104676C1 NOTE: 1 end hollow, w/ diff. lock. Close out. Pedal guards - USA made Order # Price IHS334 $36.95 IHS334B $42.85 Order # Price Description / Application IHS1240 $59.95 Hydraulic Port Block fits: M, Super M, 400, 450 gas, diesel, W9, WD9, Super W9, Super WD9, W6, Super W6, WD6, Super WD6, 600, 650 (1" block x 2.195" x 4.00", 3/4 NPT) USA made NOTE: Threaded for hydraulic hose. Fits IHS284. IHS1924 $94.70 Hydraulic Pump Gear fits: Super A, C, Super C, 100, 130, 140, 200, 230, 240, 330, 340 gas, 404, 424 gas, 444 gas, 2424 gas, 2444 gas ( fits Cessna, Pesco & Thompson hydraulic pumps w/ 9 GPM side engine mounted pump), Replaces: 350709R1 NOTE: 16 teeth. ABC3326 $8.75 NEW! Live Hydraulic Pump Seal Fits: A, C & Supers, 100, 130, 140, 200, 230, 240, 330, 340, 404, (424, 444 gas) Replaces: 353183R91, 385038R91 (0.625" I.D., 1.128" O.D., 0.250" wide) NOTE: For cam driven Pesco or Thompson pumps. See website for all applications. IHS158 $48.95 Hydraulic Pump Drive Gear fits: Farmall 756 SN: 17636 & up, IH 756 SN: 8425 & up, Farmall 856 SN: 27287 & up, IH 856 SN: 9493 & up, 766, 786, 826, 886, 966, 986, 1066, 1086, 1456, 1466, 1486, 1566, 1568, 1586, 3088, 3288, 3688, Hydro 100 Replaces: 405181R1 NOTE: 19 teeth at 25º tooth angle. IHS521 $13.00 Touch Control Stop w/ Original Style Handle fits: Cub, Super A, C, Super C, 100, 130, 140, 200, Replaces: 350717R91 NOTE: 4 used per tractor; Sold individually. IHS1252 $4.95 Retainer Clip (For Touch Control Friction Spring) fits: Cub, Cub LoBoy, Super A, C, Super C, 100, 130, 140, 200 Replaces: 351128R1, 352122R1 USA made NOTE: 2 used per tractor; Sold individually. IHS836 $8.65 Touch Control Clevis Pin fits: Super A, C, Super C, 100, 130, 140, 200, 230, 240 Replaces: 350142R1 (1/2" dia., 1-3/8" useable length, 1-9/16" total length) ABC2039 $7.95 NEW! Lift All Hydraulic Pump Seal Fits: H, M, Early Supers Replaces: 43509D, 938294R91 (1.375" I.D, 2.130" O.D., 0.437" wide) NOTE: Fits countershaft driven hydraulic pumps. IHS366 $12.50 Lift All Control Rod Spring / Flat HoldDown Spring (For Hydraulic lift lever) Fits: H, M, Super H, Super M, MTA Replaces: 15137E Description / Application Fits: A, BN, Super A; 100, 130, 140 (All w/out foot accelerator) Replaces: 48697DB (17-1/2" long) Fits: B, Replaces: 49371DA (21-3/8" long) Hydraulic parts Order # IHS278 IHS1237 IHS1440 IHS284 Price Description / Application $999.95 Live Hydraulic Pump 10 GPM @ 1600 RPM, 1200 PSI fits: H w/ F-300 front inner / outer timing cover; Super H, Super W4, 300, 350 gas Replaces: 363779R94 USA made NOTE: Customer must cut lines approx. 3/8" to work w/ original #361603R92 all steel lines. Will work for lines w/ hoses #369448R91 & w/ IHS1237 port block. $59.95 $22.50 Hydraulic Port Block fits: Super H, Super W4, 300, 350 gas (2-3/4" x 4" x 1", 3/4 NPT) USA made NOTE: Threaded for hydraulic hose. Fits IHS278. Hydraulic Dipstick fits the following when equipped w/ Lift All countershaft driven hydraulic pump: H, HV, M, MV, MD, MDV, Supers, Replaces: 15158EX (11.800" long) USA made NOTE: Mounts inside the hydraulic pump breather fill pipe. $999.95 Live Hydraulic Pump 12.6 GPM @ 1450 RPM, 1200 PSI fits: M w/ 400 gas inner & outer timing covers; Super M, Super MTA, Super W6, Super W9, T6, 400, 450 gas, 600, 650; W9 gas (must use Super W9 inner & outer timing covers) Replaces: 128190C91, 357214R92, 362175R94 (Mounting bolt pattern Top 3-3/8" c.c., bottom 2-5/8" c.c.) NOTE: Equipped w/ longer drive shaft to run optional hour meter off the front timing cover. If your tractor is not equipped w/ this you may have to trim 1/2" off end of shaft for clearance. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Hydraulic parts continue on next page 321 Chassis parts Chassis parts ABC3298 $15.75 Price Hydraulic parts cont... Bull pinions cont... IH/Farmall IH/Farmall ABC131 Price Final drive parts cont... Hydraulic parts cont... Order # FDS073 ABC539 ABC540 $7.95 $2.99 $34.95 Order # Lift Cover Friction Disc fits: 354, 2300, 364, 424, 2424, 384, B-414, 434, 444, 2444 Replaces: 3044397R1 (3" dia, 3/8" center hole) Hydraulic Touch Control Fill Plug Fits: Cub, Cub LoBoy, Replaces: 445096 (7/8" x 18 NF) USA made Hydraulic Touch Control Fill Plug Gasket Fits: Cub, Cub LoBoy, Replaces: 3405H USA made NOTE: Copper. Hydraulic Pump Control Rod fits: H, HV, (Super H, Super HV to SN: 19233) using belly mounted hydraulic pump Replaces: 15091EX (38" length, 3/8" O.D.) USA made IHS3072 $32.50 Hydraulic Pump Control Rod fits: M, MD, Early Supers w/ belly mounted pump, Replaces: 15092EX (39-3/4" length, 3/8" O.D.) USA made IHS3076 $29.95 Hydraulic Auxiliary Control Valve Control Rod fits: M, MD, Supers, MTA when using optional live hydraulic pump & auxiliary control valve Replaces: 359479R91 (43-1/2" length, 3/8" O.D.) USA made IHS3079 IHS780 IHS772 IHS774 322 $36.50 $6.45 $9.25 $6.95 Hydraulic Pump Control Rod fits: Super M, Super MD, MTA w/ live hydraulic pump & reservoir mounted under the fuel tank, Replaces: 358458R11 (22-1/4" long, has one (1) 3/8"-16 NC threaded end) USA made Position Control Handle Knob fits: 240, 340, 354, 384, 404, B414, 460 Utility, 504, 606; Lawn & Garden tractors: 70, 71, 72, 73, 100, 102, 104, 106, 122, 124 & 126 (All up to SN: 400000); 86, 108, 128, 800, 1000 & 1200 (All w/ SN: 400001 & up); 582, 582 SPL SN: 66500 & up Replaces: 371602R1 (3/8"-24 NF hole, 1.062" wide, 0.940" height) Position Control Handle Knob fits: 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros: 70, 86, 100 Replaces: 382801R1 Hydraulic Sensitivity Control Knob Fits: 544, 656, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros: 70, 86, 100 Replaces: 382805R1 IHS744 IHS243 IHS2020 IHS2024 IHS3027 IHS3020 Price $7.45 $7.20 $9.95 $9.95 $39.95 Description / Application Hydraulic Remote Handle Knob Fits: 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 389168R1 (.620" hole I.D.) Hydraulic Remote Knob fits: Some 454 Replaces: 397931R2 (7/16" dia. hole, 2" long, 13/16" to 1-5/16" O.D.) Touch Control Valve Boot fits: Cub, C, Super A, Super C, 100, 130, 140, 200 Replaces: 351753R3, 364832R1 (2.450" o/a length, 1.755" hole dia. one end, 0.725" hole dia. one end, 1.500" boot O.D.) NOTE: Rubber. 1 used for Cub, 2 used for all other; Sold individually. Touch Control Piston Sleeve Boot Fits: Cub, Super A, C, Super C, 100, 130, 140, 200, Replaces: 3517543, 364833R2 (2.425" o/a length, 0.875" hole dia. one end, 0.530" hole dia. one end, 1.235" boot O.D.) NOTE: Rubber. 1 used for Cub, 2 used for all others; Sold individually. Hydraulic Touch Control Block Gasket & O-Ring Kit fits: Cub, Cub LoBoy Replaces: 354008R95, 360713R92 (24 pieces) USA made NOTE: This Steiner exclusive kit fits both early & late touch control blocks. Some applications may have extra o-rings / washers. Order # IHS3095 IHS3091 IHS3098 IHS3104 IHS3100 DEC450 Price $5.50 $4.95 $5.75 $4.50 $4.50 $9.65 Description / Application Hydraulic Belly Pump Oil Outlet Elbow Dust Seal Spring fits: H, M & Supers using hydraulic belly pump Replaces: 15164EA USA made NOTE: 3 used per tractor; Sold individually. Hydraulic Belly Pump Filler Pipe & Control Rod Felt Washer fits: H, M & Supers using hydraulic belly pump Replaces: 15163E USA made NOTE: 2 used per tractor; Sold individually. Hydraulic Belly Pump Oil Outlet Elbow Felt Washer fits: H, M & Supers using hydraulic belly pump, Replaces: 15162E USA made NOTE: 3 used per tractor; Sold individually. Hydraulic Belly Pump Oil Outlet Elbow Metal Washer fits: H, M, Supers using hydraulic belly pump, Replaces: Q3691 USA made NOTE: 3 used per tractor; Sold individually. Hydraulic Belly Pump Filler Pipe & Control Rod Metal Washer fits: H, M, Supers using hydraulic belly pump Replaces: Q357 USA made NOTE: 3 used per tractor; Sold individually. Hydraulic Touch Handle Decal fits: 240, 340, 460, 560, 660, Replaces: 369778R1, 127741 (2" O.D.) USA made NOTE: Vinyl cut w/ white letters. $98.50 Hydraulic Touch Control Block Gasket and O-Ring Kit fits: Super A, C, Super C, 100, 130, 140, 200, Replaces: 354007R96 (38 pieces) USA made $29.95 Auxiliary Control Valve Boot fits: C, Super A Series, Super C, 100, 130, 140, 200, 230, 240, Replaces: 356790R1 NOTE: Rubber. IHS3089 $5.75 Hydraulic Belly Pump Filler Pipe & Control Rod Dust Seal Spring Fits: H, M & Supers using hydraulic belly pump; Will also fit 404, 2404 as a hydraulic filter canister spring Replaces: 15240E USA made NOTE: 2 used per tractor (except 404 & 2404); Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fits: Cub, Cub LoBoy (NOT 154, 184, 185); Also fits some Cub Cadets. Visit our website for additional application information. Order # IHS010 Price Description / Application $34.95 PTO Shift Lever & Shaft Replaces: 351970R31 (lever), 351287R1 (shaft) IHS335 $6.50 PTO Shift Lever Guide Replaces: 351967R1 IHS178 $4.95 PTO Bearing Retainer Gasket Replaces: 351258R3 USA made IHS180 $7.25 Transmission Case Rear Cover Plate Gasket (PTO Adapter Gasket) Replaces: 350837R3 USA made 154, 184, 185 PTO parts Order # Price IHS2327 (Front) $32.50 IHS2332 (Rear) $28.00 IHS2330 $23.95 Description / Application PTO Shaft Ball Bearing w/ Collar IHS2327: Fits: 154, 185 Replaces: 491590R91 IHS2332: Fits: 154, 184, 185 Replaces: 455960R91 Cub, Cub LoBoy PTO parts Fits: Cub, Cub LoBoy (NOT 154, 184, 185); Also fits some Cub Cadets. Visit our website for additional application information. IHS706 Cub, Cub LoBoy PTO parts cont... Chassis parts Chassis parts $3.50 Description / Application Hydraulic parts cont... IH/Farmall IH/Farmall IHS3068 Price Hydraulic parts cont... Order # Price IHS007BK $54.50 IHS008 $64.95 IHS009 $34.95 PTO Cam Bearing fits: 154, 185 Replaces: 59769C91 Description / Application PTO Bearing Kit, Replaces: 126107C1, 369875R1, 69696D, A31260 NOTE: Kit includes: Seal, bearing, 2 snap rings. IHS2329 $158.50 PTO Shaft, Replaces: 351269R4, 368433R91 (11-1/2" o/a length) PTO Clutch Output Shaft fits: 154, 185 Replaces: 404917R11, 546651R11, (276574R91 bearings) NOTE: Includes 2 needle bearings. IHS2337 $85.00 Rear PTO 'V' Belt Pulley fits: 154, 184, 185 when using following rotary mowers: 48", 60", 3142, 3160, 3160A, 3260, Replaces: 491881R2 (7 1/2" O.D., 5/8" belt width) PTO Shift Collar w/ Set Screw Replaces: 351286R2 (collar), 223016 (set screw) (.817" spline I.D., 6 splines) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 154, 184, 185 PTO parts continue on next page 323 154, 184, 185 PTO parts cont... Order # Price IHS2318 $9.00 IHS2333 $88.00 IHS2334 IHS2328 PTO parts cont... Description / Application Order # Price IHS923 $6.50 4-piece PTO Friction Discs fits: 154, 185 IHS978 $4.95 3-piece PTO Separator Discs Fits: 154, 185 IHS770 PTO Handle Grommet fits: 154, 185 Replaces: 404929R1 $38.00 $8.35 $98.50 $32.50 2-piece PTO Clutch Load Spring Plates Fits: 154, 185, Replaces: 527236R1 IHS2336 IHS2358 $23.95 $32.50 2-piece PTO Pressure Plate Flywheels Fits: 154, 185, Replaces: 527244R1 IHS2331 $145.00 PTO Clutch Rebuild Kit w/out Hardware fits: 154, 185 Replaces: 527245R92 NOTE: Includes (4) friction discs, (3) separator plates, (8) wavy spring washers, (4) shims. IHS1545 IHS2932 $182.50 EACH IHS776 324 $8.95 Description / Application PTO Brake Band w/ Lining fits: Super MTA, Super W6TA, 300, 330, 340, 350, 400, 450, (Some 460, 560, 660) (All w/ planetary PTO), Replaces: 359059R91, 365763R91 (1.495" wide, 0.120" thick lining) NOTE: 2 used per tractor; Sold individually. PTO Handle Knob fits: 544, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568, 4366, 4386, 4568, 4586, 4786; Hydros: 70, 86, 100, Replaces: 387885R1 (.475" hole I.D.) NOTE: For 06 series may also have to use small amount of RTV sealer to secure to lever. PTO Control Dust Boot fits: 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3388, 3588, 3788, 4366, 4386, 4568, 4586, 4786; Hydros: 70, 86, 100, 186 Replaces: 393071R2 NOTE: Also fits 766, 966, 1066, Hydro 100 as a differential lock pedal boot. 4-piece PTO & Belt Pulley Gasket Kit Fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, Replaces: 60581D, 63799D, 60589DA, 47283DB USA made NOTE: Includes (1) PTO to rear end housing gasket, (1) belt pulley cover gasket, (1) belt pulley shaft bearing cage gasket, (1) PTO drive bearing cage gasket. PTO Shaft Seal fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240, Replaces: 48114D, 71719C1 (1.375" I.D., 2.506" O.D., 0.372" wide) USA made PTO parts Price Live PTO Pawl Operating Knob fits: 330, 340, 460, 560, 660 (All w/ planetary type PTO); Serviceable for 300, 350, 400, 450, W400, W450, Replaces: 359108R1 (.310" hole dia.) NOTE: Rubber. ABC387 MFS1351 Price $13.95 $7.55 $12.95 MIS118 $48.50 MIS138 $48.50 $17.85 ABC1550 $14.95 Order # Live PTO Pawl Operating Knob fits: 300, 350, 400, 450, W400, W450 (All w/ live PTO), Replaces: 359108R2 USA made NOTE: Metal. Order # ABC1543 PTO Shaft Seal fits: H SN: 118000 & up, (M, MD & Supers SN: 59957 & up), Late W4, W6, W9 & Supers; B250, B275, B414; Also fits the following w/transmission driven PTO (Not Live): MTA, 300, 330, 350, 354, 364, 384, 400, 424, 434, 444, 450, 454, 544, 600, 650, 2300, 3414 Replaces: 45702D, 3065217R91, 358772R91, 358812R91 (1.375" I.D., 2.254" O.D., 0.312" wide) USA made NOTE: Seal may be narrower then original, 2 seals can be installed in the older applications if needed. ABC2837 $9.95 Front PTO Bearing Retainer Seal Fits: MTA - 660 w/ Live planetary PTO Replaces: 359056R91 (1.500" I.D., 2.380" O.D., 0.315" wide) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Live PTO Shaft Seal fits: Super MTA, 300, 330, 340, 350, 400, 450,460, 504, 560, 606, 660, W400, W450; Fits 404 as Transmission Driven PTO seal Replaces: 359051R91, 360436R91, 364472R91, 364477R91 (1.375" I.D., 2.378" O.D., 0.312" wide) USA made PTO Output Shaft Seal fits the following w/ single or dual speed PTO: 544, 656, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, Hydros: 70, 86, 186; Fits the following w/ dual speed PTO only: 3088, 3288, 3388, 3488, 3588, 388, 3788, 5088, 5288, 5488, 6388, 6588, 6788, Replaces: 381480R91, 534917R91 (1.375" I.D., 2.000" O.D., 0.337" wide) Independent PTO Drive Shaft Seal (For Independent PTO Drive Gear & Shaft) fits: 300, 330, 340, 350, 460, 504, 544, 606, 656, 666, 686 Replaces: 362119R93, 363514R93 (1.750" I.D., 2.690" O.D., .500" wide) Order # Price $29.95 IHS2945 $8.50 Belt Pulley Pinion & Drive Shaft Bearing Fits: Cub, Cub LoBoy, Replaces: ST225B (0.984" I.D., 2.047" O.D., 0.590" width) NOTE: Open sides, not sealed. For sealed bearing order ABC2937. See website for full applications. ABC2008 $12.50 Flat Belt Pulley Shaft Seal fits: A, B, C, Supers, 100, 130, 140, 200, 230, 240 Replaces: 43308D, 48954D, 71700C1 (1.375" I.D., 2.110" O.D., 0.315" wide) USA made IHS426 $72.15 IHS423 $69.30 Belt Pulley Guard w/ Bracket fits: A, B, BN, Super A, AV, 100, 130, 140 Replaces: 61265D USA made PTO Shield fits: H SN: 118000 & up, Super H, Replaces: 66387DAXA USA made NOTE: 13-5/8" o/a length including mounting bracket. PTO Shield fits: M SN: 59957 & up, MD, Super M, Replaces: 66424DAXA (11" o/a length) USA made PTO Over-Running Clutch (1-1/8 Female) fits: Tractors up to 75 horsepower (1-1/8" - 6 x 1-3/8", 6 spline) PTO Over-Running Clutch (1-3/8" Female & Male) Fits: Tractors up to 75 horsepower (1-3/8" - 6 x 1-3/8", 6 spline) Description / Application IHS619 IHS424 $69.30 PTO Shield (For Independent PTO) Fits: MTA, 300, 330, 340, 350, 400, 450, 460, 504, 560, 606, 660, Replaces: 360181R91, 364712R21 (6" o/a length) USA made PTO & belt pulley parts Order # Price IHS2326 $114.50 IHS425 IHS427 $99.95 $99.95 Description / Application 2 piece PTO Pulley Shield (Guard) Assembly (For tractors equipped w/ 3160A mowers) fits: 154, 184, 185 (All w/ or w/out 3 pt. hitch) Replaces: 132395C91, 492970R2 PTO Shield w/out Belt Pulley Gearbox Fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, Replaces: 55403DA USA made NOTE: 9-3/4" o/a length including mounting bracket. IH 2150 red powder coat. Front wheel hardware NOTE: Sold individually. Order # Price IHS839 $3.60 EACH IHS1617 $4.45 EACH PTO Shield w/ Belt Pulley Gearbox Fits: A, B, C & Supers, 100, 130, 140, 200, 230, 240, Replaces: 55398DA USA made NOTE: 9-3/4" o/a length including mounting bracket. Powder coat IH 2150 red. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Front Wheel Lug Bolt fits: Cub, Cub LoBoy, Replaces: 351846R1 (7/16" - 20 NF x 3/4", 5/8" thread length) USA made NOTE: Dot on head like original. 5 used per rim. Front Wheel Bolt w/ Nut & Lock Washer Fits: A, Super A, B, BN, C, Super C, 100, 130, 200, 230, Replaces: 351555R1, R2 (1/2" -13 UNC, 2-1/2" long, square head) USA made NOTE: Fits tractors w/ CLAMP style rim only. Does not fit loop style rims. 3 used per side; Sold individually, Use w/ IHS212 clamp. Front wheel hardware continue on next page 325 Chassis parts Chassis parts IHS2335 Description / Application IH/Farmall IH/Farmall PTO Drive Clutch Cup (Drum) Fits: 154, 185, Replaces: 527240R1, 547292R1 PTO & belt pulley parts cont... PTO parts cont... Front wheel hardware cont... Front wheel seals cont... NOTE: Sold individually. NOTE: Sold individually. Order # Price IHS777 $4.25 EACH IHS212 ABC253 $1.50 EACH $8.95 EACH $17.95 EACH Price Description / Application Front Wheel Bolt w/ Nut (For Loop Style Rim only) fits: Late H, Super H, Late M, Late MD, Super M, Super MD, MTA, 300, 350, 400, 450 (All w/ adjustable thread front wheels), Replaces: 181783 (bolt), 352777R1 (nut) (5/8"-18 NF, 2-11/16" length, 15/16" hex head) NOTE: Bolts front wheel to hub. Will not fit early clamp style rim. 3 used per side. IHS1181 $6.90 EACH Front Wheel Felt Seal fits: A, C, Super C (w/ adjustable wide front); Super A, A-1, AV, Super AV, AV-1; 100, 130, 140 (if using felt seal); 200, 230 (All w/ special wide front), Replaces: 49118DA (1.806" I.D., 2.574" O.D., 0.166" wide) USA made IHS1170 $5.30 EACH Front Wheel Lug Bolt fits: Late 140, 240, 300 Utility, 330, 340, 350 Utility, B-250, B-275, B-414, 354, 364, 384, 404, 2404, 424, 2424, 444, 2444, 460, 504, 544, 560, 606, 656, 660, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1466, 1468, 1566, 1568, 1586, 3088, 3288, 3688; Hydros: 70, 86, 100, 186 Replaces: 51485D (9/16"-18 NF, 1-1/8" thread length, 7/8" hex head) USA made NOTE: 6 to 8 used per rim; Sold individually. Front Wheel Stud fits the following w/ out FWA or w/out cast swept back axle: 385, 395, 454, 474, 484, 485, 495, 574, 584, 585, 595, 595XL, 674, 684, 685, 685XL, 695, 695XL, 784, 884, 885, 885XL, 895, 895XL, 995; Case/IH C50, C60, C80, C90, C100, 3220, 3230, 4210, 4230, 4240 Replaces: 453762R1, 453769R1, 528803R1 (1/2"-20 UNF x 1-3/4" w/ serrated shoulder) NOTE: 6 used per rim; Sold individually. ABC270 IHS1361 IHS1362 Front Wheel / Rim Clamp fits: A, B, C, H, M, MD & some Supers, I, O, W4, 6, 9 series, W400, W450, some 100, 130, some 200, 230, 600, 650, 660, Replaces: 48976DA (.540" dia. hole) NOTE: Sold individually. Wheel Clamp Lock Nut (For Axle Shaft & Front Wheel) fits: A, B, BN, C, 100, 130, 200, 230, 240, 330, 340, 404, (424, 444 both w/ standard axle), F504 Row-Crop (5/8"-18 thread) NOTE: No re-threading necessary on worn shafts. Check size before ordering. $5.25 EACH $12.95 EACH $33.35 EACH Front Wheel Felt Seal fits: B, BN (w/ double front wheel), C, Super C, 200, 230 (tricycle only), Replaces: 55453D (1.688" I.D., 2.539" O.D., 0.345" wide) Price $5.25 EACH Front Wheel Bearing Seal fits: B250 up to SN: 20101, B275, B414, H, Super H, F300, F350, (I300, I350 - both w/ adjustable axle only), (M thru MTA - All w/ IH adjustable wide front), 354, 364, (I404, 424, 444 - All w/ heavy duty axle), 434, F460, (I460, I504 - both w/ standard axle), F544, (I544, 606 both w/ standard axle), 656, 2300A, (2424, 2444 - both w/ heavy duty axle), 2500 Replaces: 48539D, DA, 358778R1, 368587R1, 704083R91 (1.750" I.D., 2.786" O.D., 0.294" wide) Front Wheel Bearing Seal fits: M thru MTA (All w/ narrow front end); I6, O6 thru WD6, 400, 450, W400, W450; I300, 330, 340, 460, 504 (All w/ heavy duty axle) Replaces: 48704D, DA, 358779R91, 358818R91, 367161R91, 372475R91, 704108R91, 708108R1 (2.063" I.D., 3.250" O.D., .294" wide) Order # IHS2338 Price 326 Front Wheel Felt Seal fits: Cub, Cub LoBoy, Replaces: 350768R1 (1.627" I.D., 2.216" O.D., 0.164" wide) USA made Order # Price FDS071 $52.15 IHS193 $62.95 Front Wheel (Blank Center) fits: Some F12, WHS033 $74.95 Front Wheel (3 Welded Lugs) (For tractors WHS019 $69.95 WHS042 $65.60 WHS022 $72.50 Front Wheel (6 Lug) w/ (4) Wheel Weight WHS043 $82.75 WHS070 $86.45 IHS3140 IHS1797 $44.50 $34.95 Front Wheel Bearing Kit fits: A, B, C, Supers; 100, 130, (140 w/ 3 loop rim), 200, 230, Replaces: 360119R92 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Wheel Bearing Kit w/ Seal fits: Same as IHS3137, Replaces: 371418R92 (1.780" inner race I. D., 1.375" outer race I.D.) NOTE: See website for additional applications. To determine back spacing lay your wheel flat on the ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8"). Front wheels / rims inside (bead to bead) not outside to outside. See pg. 344A. Order # Price $74.95 Description / Application Front Wheel (5 lug) w/ Wheel Weight Holes fits: Cub, Cub LoBoy, Some Cub LoBoy 154, 184, 185 Replaces: 351074R91, 385651A1 (3" x 12") IHS195 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Front Wheel (6 Lug) fits: Late 140, F240, F340, F404, F504, Replaces: 370604R91 (3" x 15", 4-5/8" pilot, 3" bolt on c.c., 3-1/4" back spacing) USA made Front Wheel (6 Lugs) fits: Some 544 - 3688 & others, Replaces: 371735R3 (6" x 15", 6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made Holes fits: Some 140 thru 1456 Replaces: 380065R91, 704675R91 (4.5" x 16", Pilot hole = 4.625", 6" bolt circle, 4" back spacing) USA made NOTE: For 5:50 x 6:00 x 16" tires. $48.95 Front Wheel (Blank Center) fits: (A & B used w/ Hub # 6787D), BN, C (All using IHS212 clamps); F12, F14 (Both using cast hub # 6787D only w/ original clamps) Replaces: 31453D, 351556R92 (3" x 15") USA made NOTE: Electro-coated black. Use w/ 13.214" diameter center dish. NO LOOPS, Not for tractors using 3 loop style rims. Check your rim type before ordering as rim may have been switched from the original. Front Wheel (Blank Center) Fits: Farmall AV (3" x 19"; 17-3/8" I.D.) USA made NOTE: Remove tabs from old rim & weld into new blank rim. with front hub #'s 8734D or 9350D only using 3 loop style rims held on by 3 bolts, not clamps) fits: Some A, B, C & Supers, 100, 130, Early 140, 200, 230 (Used w/ hub #'s 8734D or 9350D), Serviceable for #57095D (3" x 15) NOTE: Not original look. Check your rim type before ordering as rim may have been switched from the original using 3 loop style rim. Will not fit tractors with IHS212 clamps. NOTE: To determine the width of Wheels / Rims: Measure the WHS020 Description / Application F14 when equipped w/ 16" blank rim; F20 but 1/2" narrower, H, M, MD, W4, I4, O4, W6, I6, ID6, O6, WD6, Replaces: 354223R1, 354244R91 (4.25" x 16". Use with 13.430" diameter center dish.) USA made NOTE: No loops, Electro-coated black. Not for tractors using 3 loop style rims. Check your rim type before ordering as rim may have been switched from the original. What is back spacing? Description / Application $6.50 Front Hub Cap fits: 154, 184, 185 Replaces: 404835R1 USA made Description / Application Description / Application Front 6-Lug Hub fits: 560, 664, 666, 686, 706, 756, 766, 786, 806, 826, 856, 886, 966, 986, 1026, 1066, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586; Some 3088 - 5488 (All using 6 lug hub) Replaces: 370256R11, 370256R21, 391823R11 NOTE: Verify casting number before ordering. 6 threaded holes for lug bolts. See website for additional applications. Front Dust Seal fits the following as a front felt hub seal: H, M, MD, MTA & Supers, I, O, W4, 6 & Supers, 300, 350, 400, W400, 450, W450, Replaces: 48702D (2.000" I.D., 3.156" O.D., .375" wide) USA made NOTE: Sold individually. Order # Price $78.50 Front hub, parts Front wheel seals IHS1162 Order # IHS3137 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 385 - 3688 Replaces: 364343R92 (6" x 16", Pilot hole = 4.625", 6" bolt circle, 4-3/4" back spacing) USA made Front Wheel (6 Lug) w/ (4) Wheel Weight Holes Fits: Some 385 thru 3688 & others Replaces: 486101R1, 528687R1 (8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back spacing) USA made 327 Chassis parts Chassis parts ABC268 $2.80 EACH Order # Front wheels / rims cont... IH/Farmall IH/Farmall ABC397 Description / Application Front hub, parts cont... Tires, tubes, valves Chassis parts Price $52.15 Description / Size Triple rib, Tire only (4.00 x 12") WHS051 $16.45 Tube only (For 4.00 x 12" & 4.80 x 12" Tire) WHS052 $83.75 Triple rib, 6 ply Tire only For 3" x 15" Wheel (5.00 x 15") WHS053 $14.80 Tube only (For 4.00, 5.00, 5.50 x 15" Tires) WHS047 $93.50 Triple rib, 6 ply Tire only (5.50 x 16") WHS048 $105.75 Triple rib, 4 ply Tire only (6.00 x 16") WHS049 $110.95 Triple rib, 6 ply, Tire only (6.50 x 16") WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires) FDS089 $68.95 Multi rib, 4 ply, Tire (4 x 19") FDS056TU $15.75 Tube only (For FDS089 Tire) (4.00 x 19") WHS060 $37.95 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) WHS059 $53.75 Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS058 $56.55 Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS061 $80.25 Rear Tube only (For 13.6, 14.9 x 28" Tires) WHS062 $56.95 Rear Tube only (For 9.5 x 32" Tires) WHS063 $64.95 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $65.25 Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $89.95 Rear Tube only (For 12.00 x 38", 13.00 x 38", 13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38" tires) Order # Front wheel weights Order # IHS331 IHS957 IHS327 Price Description / Application ABC385 $1.50 Rear Tire Inner Tube Valve (Air / Water Valve) (New Style) fits: Tractor tubes w/ Internal threads NOTE: Sold Individually. Cub LoBoy; 'Some' 154, 184, 185 when using 3 x 12 5 lug front rim w/ wheel weight holes (rim # 351074R91) Replaces: 351371R1 (Primer paint) NOTE: Set Includes (2) weights, approximately 28 lbs. each piece. Front Weight Carriage Bolt, Washer & Nut Kit fits: Cub, Cub LoBoy, Some 154, 184, 185 (All using 351074R91 Front Rim) Replaces: 15056R1, 18708R1, 433828, 88630 (bolt); 102637, 280431 (nut); 103323, 80679 (washer) (1/2" dia., Grade 5 bolt) NOTE: Zinc finish. 4 used per rim; Sold individually. $157.00 Front Wheel Weight Set fits: A, B, C, H, M Price Order # Price Rear Tire Inner Tube Valve (Air / Water Valve) (Old Style) fits: Tractor tubes w/ External threads NOTE: Sold Individually. ABC399 $2.00 EACH Brass Nut (For Rear Tire Inner Tube Valve) IHS822 $4.95 EACH $5.70 EACH IHS839 $3.60 EACH ABC397 $2.80 EACH Description / Application IHS3317 $190.00 NEW! Front Hang-On Weight Bracket IHS3322 $60.00 IHS3330 $30.00 NEW! Front Weight Bracket Spacer Fits: 766, 966, 1066, 1466, 1468, 1566, 1568, Hydro 100, Replaces: 536041R1 (8-1/16" o/a length) NOTE: 2 used per tractor; Sold individually. NEW! Front Weight Locking Cam Fits: 274, 284, 385, 484 thru 884, 544, 664, 656, 666, 686, 766 thru 1568, 786 thru 1586, 3088 thru 3688, 5088, 5288, 5488; Hydro: 70, 84, 100, 186, Replaces: 536044R1, 74202C1 (3-1/2" o/a length) NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear Rim to Center Bolt fits: I-240, (F300 SN: 3727 & up), I-330, F340, F350, (F400 SN: 5181 & up), F450, F460, (F504 using wheel 363014R1), F560 w/ 15.5 x 38" tires; Fits the following w/ wheel 388336R1: (656 Hi clear), 666, 686, Hydro 70, Hydro 86, Replaces: 363017R1 (5/8" dia. NF x 2-1/4" long) USA made NOTE: Measure length prior to ordering. 4 to 6 used per rim; Sold individually. If you need the nut order FDS1211. MIS062 $3.60 EACH MIS063 $3.75 EACH MIS121 $0.50 EACH IHS032 $69.99 Price NOTE: Sold individually. Order # Fits: 385, 404, 424, 444, 454, 460, 464, 484, 504, 544, 560, 574, 584, 656, 660, 664, 666, 674, 684, 686, 706, 756, 784, 806, 826, 856, 884, 1026, 1206, 1256, 1456, 2400, 2500, Hydro 70, Hydro 84, Hydro 86; will also fit 766 thru 1568 by using (2) IHS3322 spacers Replaces: 383389R11, R21 (10 hole bracket, 16" c.c. bolt holes, 23-3/8" o/a length) USA made Description / Application $9.90 EACH Rear rim hardware IHS2423 Order # & Supers, I, O, W-4, 6 series, 100, 130, 140, 200, 230, F300, F350 Row-Crop, 400, 450 Replaces: 6788D (Primer paint) NOTE: Set Includes (2) weights, approximately 42.5 lbs. ea piece. 328 ABC384 $5.15 Description / Application Order # Rear Axle Hub........................................................IHS151......... $299.95 Front weight brackets, parts $125.00 Front Wheel Weight Set fits: Farmall Cub, $1.60 Price ABC531 $5.15 Description Price IHS975 IHS877 $10.40 EACH Description / Application Rear Rim Lug Bolt fits: Cub, Cub LoBoy, 154, 184, 185, Replaces: 351079R1 (1/2" - 20 NF, 1" thread length, 13/16" hex head) USA made NOTE: 5 used per rim; Sold individually. Rear Rim to Center Nut & Bolt Fits: Cub, Cub LoBoy w/ original rim, (Will not fit aftermarket rim WHS003) Replaces: 351085R1 (1/2" - 20 NF x 1-3/4" long (3/4" wide head)) NOTE: 4 required per rim. Rear Rim to Center Nut & Bolt Fits: Cub, Cub LoBoy w/ WHS003 aftermarket rims only (3.116" o/a length, 1/2"-20NF; Square head) NOTE: 4 required per rim. Rear Wheel Lug Bolt fits: Lawn & garden; Cub Cadet 70 thru 1650 Replaces: 351846R1 (7/16" - 20 NF x 3/4", 5/8" thread length) USA made NOTE: Dot on head like original. 5 used per rim. Rear Rim Lug Bolt fits LH side: A, Super A, B, BN, 100, 130, 140 (All w/ stamped steel dish); Fits LH & RH side on the following utility tractors: B-250, 240, B-275, 300, 330, 340, 350, 354, 364, 384, 404, B414, 424, 444, 454, 460, 464, 484, 574, 584, 606, 674, 684, 784, 8, Replaces: 51485D (9/16" x 18 NF, 1-1/8" thread length, 7/8" hex head) USA made NOTE: 5 to 8 used per rim; Sold individually. Rear Wheel to Rim Bolt fits: H, M & Supers, O, W, 4, 6 series, (F300 up to SN: 3726), (F400 up to SN: 5180) Replaces: 48985DA (Square head; 5/8-11" NC x 4-1/4" long) NOTE: 6 required per rim. Rear Rim Bolt Assembly w/ Nut Fits: 24" Farmall A thru 240 stamped dish except Cub (5/8 x 11 x 3-1/2" NC Hex Head w/ washer) NOTE: 4 required per rim; Sold individually. Rear Rim Bolt Assembly w/ Nut Fits: 24 & 28" Rear Rims - WHS001, WHS002, WHS004, WHS012, WHS013, WHS016 applications (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: For tractors w/ stamped steel center dishes. 4 to 6 used per rim; Sold individually. Flat Washer only (For MIS063) (5/8" I.D.) NOTE: 4 to 6 needed per wheel; Sold individually. Rear Wheel Clamp fits: H & Supers (All w/ pneumatic tires, not steel wheels); Early 300 w/ 6194D rear wheel Replaces: 6192DBX (Fits 2 1/2" dia. axle) Rear rims / wheels - USA made NOTE: To determine the width of Rims / Wheels: Measure the inside (bead to bead) not outside to outside. See pg. 344A. Order # WHS003 Price Description / Application $139.50 Rear Rim (4 Loops) Fits: Cub, Replaces: 351428R91 (7" x 24", 14-1/2" c.c. loops) WHS001 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $134.50 Rear Rim (4 Loops) fits: Some A, B, BN, Super A, 100, 130, 140, 240, etc., Replaces: 51281DB, 354873R92 (8" x 24", 14" c.c. loops) NOTE: Uses 5/8" bolts. Rear rims / wheels continue on next page 329 Chassis parts Order # WHS057 Rear rim hardware cont... Fits: 240, 404 Utilities Replaces: 369388R1 USA made IH/Farmall IH/Farmall Tubes are for BIAS ply tires only, not for radial tires. Also not for recreational use. Need a tire or tube that is not listed? Call our technical service department. Tires, tubes, valves, nut are sold individually. Rear axle hub Rear rims / wheels - USA made cont... Rear rims / wheels - USA made cont... NOTE: To determine the width of Rims / Wheels: Measure the inside (bead to bead) not outside to outside. See pg. 344A. Order # WHS002 $205.95 Rear Rim (4 Loops) fits: Some A, B, BN, Super A, 100, 130, 140, 240, I404, etc., Replaces: 56206DA, 354876R91, 374807R91 (10" x 24", 14" c.c. loops) NOTE: Use 5/8" bolts. WHS002 Valve stem hole is on side closest to loops. Rear Rim (6 Clamps) fits: Farmall C, Super C, 200, 230, 240, 404; Serviceable for AV, Super AV Replaces: 352806R91 (9" x 36) NOTE: For AV & Super AV, Rim will bolt on but the clamps on our rim are more centered then the original (original rim clamps at outer edge). WHS029 330 $329.95 WHS1613 $235.95 WHS036 $297.60 WHS035 $282.95 $175.20 Rear Rim (6 Loops) Fits: Some I300 thru 606 Replaces: 707703R91 (11" x 28") WHS013 WHS021 $157.00 Rear Rim (6 Loops) Fits: I300 etc. Replaces: 361700R91 (10" x 28") WHS012 $305.95 $148.05 Rear Rim (6 Loops) Fits: Some I240 thru I404 Replaces: 703928R91 (9" x 28") WHS004 WHS018 $178.95 $208.75 Rear Rim (6 Loops) Fits: Some B250 thru 884 Replaces: 363988R91 (12" x 28") NOTE: Back spacing on loops = 3-1/2" & 7-3/4". Rear Rim (Deep Drop Center) Fits: Some H, M, Supers, MTA, Early 300 to SN: 3726, Early 400 to SN: 5180, Replaces: 55563D (10" x 38") NOTE: 34" dia. center hole for cast center dish. WHS029 does not include stop block, must reuse old stop block or fabricate new one. WHS037 WHS024 WHS046 $294.95 $305.20 Description / Application Rear Rim (Deep Drop Center) Fits: Some H, M, Supers, MTA, Early 300 up to SN: 3726, Early 400 up to SN: 5180 Replaces: 55564D (11" x 38") NOTE: Rims have 34" dia. center hole for cast centers & includes stop block. Rear Rim (Deep Drop Center) Fits: Some H, M, Supers, MTA, Early 300 up to SN: 3726, Early 400 up to SN: 5180 (14" x 38") NOTE: Includes stop block. Flat Base Rear Rim (Blank Center) (For Stamped Steel 9 Bolt Pattern Rims) fits: IH models (10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. Rear Rim (Double-Bevel) Fits: Some F340, 574 Row-Crop & others, Replaces: 372319R2 (12" x 36") NOTE: WHS036 has 8 drive lugs. Rear Rim (Double-Bevel) Fits: Some F300 SN: 3727 & up, F340, F350, (F400 SN: 5181 & up), F450, F460, F504, F544, F656 & others, Replaces: 363145R1 (10" x 38") NOTE: Has 18 drive lugs. Rear Rim (Double-Bevel) Fits: Some F300 SN: 3727 & up thru 856 & others Replaces: 363023R1, 383691R1 (12" x 38") NOTE: Has 18 drive lugs. Rear Rim (Double-Bevel) Fits: Some F300 SN: 3727 & up thru 3688 & others Replaces: 365946R2, 380869R1 (14" x 38") NOTE: Has 18 drive lugs. $61.75 Reinforcing Ring (For 9 bolt pattern rim) USA made NOTE: Repairs existing 9 bolt rim. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # ACS027 Price $435.00 ACS028 $435.00 ACS026 $450.00 WHS008 MIS108 MIS109 MIS110 $468.25 $18.75 $14.99 $8.95 Order # Description / Application Rear Spinout Rim (4 Rails) Fits: Some IH 240, 404 Replaces: 371561R91 (10" x 24") USA made IHS331 Price $125.00 Price Rear Spinout Rim (4 Rails) Fits: Some I240 - 884 Replaces: 365324R92 (12" x 28") USA made Rear Spinout Rim (4 Rails) Fits: Some IH300 - 884 (13" x 28") USA made NOTE: Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108). Rear Spinout Rim Stop (For 90° Drilled Rim Rail) fits: IH / Farmall models USA made NOTE: Will not fit the rims that we sell. Rear Spinout Rim Stop (Parallel Drilled) Fits: IH / Farmall models Replaces: 365327R2 NOTE: Use MIS109 for the listed spinout rims. Stop Bolt (For Rear Spinout Rim Stops) Replaces: 365326R1 USA made NOTE: Sold individually. $1.60 Rear Wheel Weight Carriage Bolt Washer & Nut Kit fits: Yellow / White Cub Cadet Lawn Mower not red tractors Replaces: 351371R1 (1/2" dia., Grade 5 bolt) NOTE: Zinc finish. 4 used per rim; Sold individually. IHS959 $2.50 Rear Wheel Weight Carriage Bolt Washer & Nut Kit fits: Cub, some Cub LoBoy 154, 184, 185, Replaces: 15144R1, 18710R1, 433848 (bolt); 102637, 280431 (nut); 80679, 103323 (washer) (1/2" x 3" Grade 5 bolt) NOTE: 4 used per rim; Sold individually. Cub drawbar parts Order # Price Description / Application IHS566 $29.95 Swinging Drawbar Hardware Kit NOTE: Kit includes: (6) - 351679R1 Drawbar bolts (2) - 103419 Cotter pins (2) - 220068 Hex nuts (2) - 179887 Hex HD cap screws (2) - 103323 Lock ashers (2) - 106265 Flat washers (1) - 103408 cotter pin (1) - Q3558 pin. IHS213 $4.75 EACH Drawbar Bolt only, Replaces: 351679R1 (5/8" dia.) NOTE: Used to bolt brackets to the final drive housing. Can also be used for other applications. Sold individually. 3-point top-links, parts Order # Price FDS023 $23.50 FDS346 $39.45 Description / Application Top-Link Category 1 Adjustable w/ forged ends & 3/4" hole (16" tube length) Top-Link Category 2 Adjustable w/ forged ends & 1" hole (16-3/4" tube length) ABC1431 $1.90 ABC1427 $3.25 Description / Application Rear Wheel Weight Set fits: Yellow / White Cub Cadet Lawn Mower not red tractors, Replaces: 351371R1 (Primer paint) NOTE: Set Includes (2) weights, approximately 28 lbs. each piece. Description / Application IHS957 Rear Spinout Rim (4 Rails) Fits: Some I300 & up Replaces: 373300R91 (11" x 28") USA made Rear wheel weight set, parts Order # Rear wheel weight set, parts cont... STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Category 1 3-Point Top Link Pin (3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length) Category 1 3-Point Top Link Pin (3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length) 3-point top-links, parts continue on next page 331 Chassis parts Chassis parts WHS016 $138.50 Description / Application Price NOTE: Stop holes are angled. IH/Farmall IH/Farmall WHS025 Price Order # Rear spinout rims, parts 3-point top-links, parts cont... Order # Price ABC1429 $4.25 MIS119 $0.50 Drawbars, parts cont... Order # Description / Application ABC1433 Category 2 3-Point Top Link Pin (1" O.D., 4-1/4" usable length, 6" o/a length) 3-Point Lynch Pin fits: IH / Farmall models equipped w/ a 3-Point Hitch using a .420" dia. pin, Replaces: 517758R91 (1-5/8" usable length) IHS700 Price $2.15 Description / Application 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing fits: IH / Farmall models w/ a Category 2 3-point hitch switching to a Category 1 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) Drawbars, parts cont... Order # IHS1377 Price $12.15 $159.30 Drawbar fits: Farmall A (only) Replaces: 43525DAXA USA made IHS1378 $14.95 IHS1379 $5.30 3-point crank arm Order # Price IHS912 $144.50 $144.50 Crank Arm............................................................. IHS830 .............$18.60 Lower 3-point link latch spring Fits the following w/ a Category II 3-point hitch: 504, 544, 606, 656, 664, 666, 686; Hydros: 70, 86, Replaces: 380992R1, 392882R1 (.075" thick, 5.896" long, .325" hole dia., .200 to .755 wide) USA made Description Order # Price Lower 3-Point Link Latch Spring......................IHS1624............$14.95 IHS914 IHS916 $144.50 $158.50 Drawbars, parts Order # Price ABC2010 $24.00 FDS022 FDS211 $46.95 Description / Application Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually. Standard 3-Point Drawbar Category 1 Fits: IH/Farmall models Replaces: 751764R1 (1" x 2-1/2" x 26", 7/8" pin size) $29.99 Drawbar Lock Category 1 Fits: 404, 504, 606 NOTE: Will fit FDS022 drawbar. 332 IHS2016 IHS2022 IHS236 Swinging Drawbar (Straight) Fits: H, Replaces: 49206DA (53-1/4" long, 2-1/4" wide, 3/4" thick) USA made NOTE: Like original Bare steel. Pin goes through oval hole in end. Swinging Drawbar (Straight) Fits: Super H, 300, 350, F460 Replaces: 357530R1, 360632R1 (53-1/4" long, 2-1/4" wide, 1" thick) USA made NOTE: Like original Bare steel. Pin goes through oval hole in end. Swinging Drawbar (Straight) Fits: M, Replaces: 49200DB (53-1/4" long, 2-1/2" wide, 3/4" thick) USA made NOTE: Bare steel. Pin goes through oval hole in end. IHS428HM $34.25 $55.50 Swinging Drawbar (Straight) Fits: Super M, MTA, 400, 450, 560, F656, Replaces: 357529R1, 359177R1 (53-1/4" long, 2-1/2" wide, 1" thick) USA made NOTE: Like original Bare steel. Pin goes through oval hole in end. IHS676 $34.95 Forged Swinging Drawbar Guide Strap Fits: H; Serviceable for 300, 350, Super H, Replaces: 45184D, 45184DA IHS674 $42.95 IHS118 $168.50 Swinging Drawbar Roller Pin Clevis Fits: H, M, MD & Supers, 300, 350, 400, 450, W series (3-7/8" c.c. pin spacing) USA made NOTE: Aftermarket part. Will not fit models w/ fasthitch. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Slotted 3-Point Torsion Shaft LH Crank Arm fits: 1206, 1256, 1456, 1066, 1466, 1468, 1566, 1568, Replaces: 392090R3 IHS054 $299.00 IHS752 $15.95 IHS072 (LH) $229.95 Front Drawbar Pin fits: M, MD & Supers using 8874DA pivot support bracket, 400, 450, W6 SN: 1682 & up thru WD9 & Supers, 560, 600, 650, 660 Replaces: 58657D, 58657DA (1-1/4" dia. x 3-3/4" long) USA made Drawbar Pin Retainer Plate Fits: Same as IHS1377 & IHS1378 Pins; Will also fits 284, 385, 454, 464, 484, 574, 584, 674, 684, 784, 884, H84 Replaces: 49139D, 57655D, 132794H1 (1.480" long, 1" wide, .377" hole dia., .193" thick) USA made NOTE: Zinc plated. Swinging Drawbar Roller Shaft Support fits: H, M, MD, MTA & Supers Replaces: 356563R91 IHS428 Forged Swinging Drawbar Guide Strap Fits: M, MD; Serviceable for 400, 450, MTA, MTA diesel, Super M, Super MD Replaces: 45290D, 45290DB Description / Application 3-Point Torsion Shaft w/ Hole Fits: 1086 up to SN: 37888, 1486 up to SN: 20243, 1586 up to SN: 17123, 3388 up to SN: 9038, 3588 up to SN: 9501 Replaces: 71386C1 NOTE: IHS054 can update 1206 - 1568 tractors by replacing slotted style shaft with improved hole design, but must use IHS071 & IHS072 (Also must use #71385C1 inner shaft not avail. from STP.) Torsion Shaft Bolt fits: Same as IHS054 Replaces: 71390C1 USA made NOTE: 2 used per tractor; Sold individually. $49.95 IHS071 (RH) Swinging Drawbar Roller Shaft Support fits: F300, 340, 340 Utility, F350, 400, 450, 460, 460 Utility, 504, 544, 560, 656, 664, 666; Serviceable for H thru MTA, Replaces: 356563R92 Drawbar Brace Rod fits: Early H up to SN: 36679, Early M up to SN: 21090 Replaces: 41119D (18-1/2" c.c. hole) USA made $52.50 $58.50 Price $104.50 Drawbar Brace Rod fits: Late H SN: 36680 & up, Late M SN: 21091 & up, Super H, Super M, MTA, 300, 340, 350, 400, 450, 460, 544, 560, 656, 664, 666 Replaces: 57233DA (17-1/4" c.c. hole) USA made Crank Arm w/ Hole fits: 1086, 1486, 1586, 3388, 3588, 3788, 5088, 5288, 5488, 6388, 6588, 6788 $229.95 IHS072 Replaces: 71388C1 IHS071 Replaces: 71389C1 NOTE: Bolt style. 3-point hitch kits - USA made Order # Price IHS3014 $750.00 Description / Application Fits: C, Super C, 200, 230 w/out fast hitch (Category 1) NOTE: Includes the brackets to clamp to axle housing & rods and chains for cultivator lift. Drawbar & top link sold separately. IHS3009 Drawbar Support (For Fasthitch) Fits: 706, 806, 826, 1026, 756, 856, Early 766, 966, Hydro 100 Replaces: 389064R1 USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $985.00 Fits: H, M, MD, Supers, MTA, 300, 330, 340, 350, 400, 450, 460, 504, 544, 560, 606, 656, 666, 686, Hydro 70 (Category 2) NOTE: Allows use of original drawbar. Includes Category 2 top link & 2 hydraulic cylinders. Fits Row-Crops & Utilities w/out fast hitch, hoses not included. Can ship UPS in 4 boxes. 333 Chassis parts Chassis parts Description IHS910 Order # IHS105 IH/Farmall IH/Farmall (For Fasthitch or 3-Point Conversion Lift Arm Screw) fits: 230, 300, 330, 340, 350, 400, 404, 450, 460, 504, 544, 560, 606, 656, 664, 666, 686, 706, 756, 766, 806, 826, 856, 966, 1026, 1066, 1206, 1256, 1456, 1466, 1468, 1566, 1568; Hydros: 70, 86, 100 Replaces: 523861R2 USA made Description / Application Front Drawbar Pin fits: H SN: 39937 & up, Super H, W4 SN:1133 & up, O4, OS4, 300 thru 460, 404, 504, 544, 606, 656, 664, 666, 686, 706 & 806; Also fits the following using 1-1/8" dia. pin: 756, (766 up to SN: 13892), 826, 856, (966 up to SN: 27089), 1026, (1066 w/ 2-piece Replaces: 57654D (1-1/8" dia. x 3-1/2" long) USA made Torsion shafts, parts Fast hitch pins - USA made Order # IHS3077 IHS3069 $28.50 $24.50 Fast Hitch Pin w/ Ball & Handle Fits: Super C, 200, 230, 340 as a fast hitch to 3-point adapter pin (2 used); T340, TD340 used as an upper 3-point link attaching pin (1 used) Replaces: 517853R21 (3/4" O.D., 4-1/2" long - pin only) Fast Hitch Pin w/ Ball & Handle Fits: 230, 240 as a float locking pin (2 used); 300, 330, 340, 350, F400, F450, 460, 504, 560 as a lateral swing lockout pin (1 used); 544, 656, 666, 706, 756, 766, 806, 826, 856, 966, 1026 as a quick attach pin (4 used), Replaces: 522841R11, 522842R11 (3/4" O.D., 2-7/8" long) Fast Hitch Link / Rockshaft Cylinder Pin w/ Ball & Handle fits: F300, F350, F400, F450 (2 used as a lateral link pins, 1 used as a rockshaft cylinder adjusting depth pin), Replaces: 520008R11 (7/8" O.D., 3-3/16" long (pin only), 4-1/2" long (pin w/ handle)) NOTE: Zinc plated. Close out Price IHS024 $9.95 The following blade parts fit Super A & Model 60 Blade (Please see diagram): Order # Price IHS504 $11.25 IHS025 IHS026 $42.50 $9.85 IHS506 $135.00 Side dresser fertilizer hopper Description ABC2357 Order # ABC2362 Description Fits: Cub, A, B, C, Super A, Super C, 100, 130, 140, 200, 230, 240; Fertilizer Attachments: 56D thru 623 Replaces: 620720R91, 626461R91 Front Lifting Lever Replaces: 650345R91 Deluxe tractor umbrellas Lay Off Clamp & Wedge Assy. fits: Cub, A, B, C, Supers, Replaces: 29601BA NOTE: See website for full application information. Wedge only fits: Cub, A, B, C, Supers Replaces: 1875B NOTE: See website for full application information. Description / Application Long Bolt Spacer Locator Replaces: 650340R1 Description / Application Wedge Bolt & Nut only fits Open & closed cultivator shank clips for: Cub, Super A, Super C, 100, 200 Replaces: 512384R1 (5/8" dia. thread, 4-1/4" long) All decals are USA made. Tips on applying our decals Cultivator parts Order # Mylar decals Four oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform. Order # Price Red Deluxe Umbrella w/ Brackets ..........ABC2357.... $192.80 White Deluxe Umbrella w/ Brackets .......ABC2362.... $192.80 Price Fertilizer Hopper..................................................IHS1478 ...... $325.00 NOTE: Does not include adjustable quadrant. To bolt this hopper customer must have existing side dresser attachment. Made w/ extremely durable tough plastic, the body of this hopper will not rust. Base is cast iron w/ new gears. 334 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm All decals are mylar unless otherwise noted. Have the pitted area filled, sanded smooth and painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed. For mylar decals (film between lettering): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface. For vinyl cut deals (no film between lettering) Special order only: Peel backing paper from decal. The decal will be stuck to the application paper. Align the decal using the design, not the application paper, and firmly press decal into place. Slowly remove the application paper starting at one corner. Please note: The colors are fused into the vinyl eliminating stacking. Caution: Inspect all decal pieces before applying to tractor. Order # Price Application Farmall Order # Price Application International 1945 - 1954 cont... DEC266 $45.00 Farmall Regular DEC235 $41.00 AV Culti-Vision DEC069 $25.00 F12 DEC092 $41.00 B DEC070 $25.00 F14 DEC110 $25.00 B Culti-Vision DEC071 $25.00 F20 DEC111 $25.00 BN DEC072 $51.00 F30 DEC112 $25.00 BN Culti-Vision McCormick Deering DEC093 $25.00 C DEC075 $25.00 W30 DEC094 $25.00 DEC077 $49.00 1020 H DEC378 $47.00 DEC078 $49.00 I4 1530 DEC237 $41.00 McCormick Deering 1939 - 1944 I6 DEC095 $25.00 Early Circle Cub (up to July 1947) M DEC096 $51.00 MD DEC103 $45.00 W4 DEC104 $45.00 W6 DEC105 $45.00 W9 DEC106 $53.00 WD6 DEC107 $53.00 WD9 DEC097 $25.00 Super A (1947-54) DEC236 $41.00 Super A Culti-Vision (1947-54) DEC242 $41.00 Super AV Culti-Vision (1947-54) DEC098 $25.00 Super C (1951-54) DEC099 $25.00 Super H (1953-54) DEC100 $25.00 Super M (1952-54) DEC101 $30.00 Super MTA gas (1954) DEC102 $30.00 Super MD (1952-54) DEC244 $45.00 Super W4 (1953-54) DEC246 $45.00 Super W6 (1952-54) DEC247 $47.00 Super W6TA (1954) $53.00 Super WD9 (1953-56) DEC387 $40.00 DEC088 $30.00 A DEC089 $30.00 B DEC249 $41.00 C DEC087 $30.00 H DEC441 $100.00 H Vinyl cut DEC086 $30.00 M DEC373 $49.00 W4 DEC374 $49.00 W6 DEC375 $49.00 W9 $55.00 WD9 DEC376 International 1945 - 1954 DEC397 $41.00 McCormick Deering Farmall Cub (July 1947 - July 1949) DEC090 $25.00 McCormick Farmall Cub (post July 1949) DEC432 $90.00 McCormick Farmall Cub (post July 1949) Vinyl cut DEC091 DEC109 $25.00 A $25.00 A Culti-Vision DEC088 Super series DEC248 DEC091 Miscellaneous Chassis parts $24.50 Description / Application IH/Farmall IH/Farmall IHS3073 Price Super A & Model 60 blade parts USA made Decals continue on next page DEC101 DEC417 NO REFUNDS on mylar decals if applied to surface and / or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 335 Mylar decals - USA made cont... Order # Price Application Miscellaneous $28.00 100, 130, 140 gas (12 pieces) DEC415 $28.00 200, 230 gas (10 pieces) DEC416 $28.00 240 gas (11 pieces) DEC417 $30.00 300 gas (13 pieces) DEC418 $32.00 330 gas (12 pieces) DEC419 $34.00 340 gas (9 pieces) DEC421 $30.00 350 gas (11 pieces) DEC423 $24.00 400, 450 gas (11 pieces) DEC424 $36.00 400, 450 diesel (15 pieces) DEC425 $40.00 460 gas (14 pieces) DEC426 $44.00 460 diesel (17 pieces) DEC427 $34.00 560, 660 gas (13 pieces) DEC428 $42.00 560, 660 diesel (15 pieces) DEC436 $4.50 IH Logo (2" x 2-1/4) $7.95 IH Logo (4-1/2" x 4-3/4) DEC3292 $12.50 NEW! IH Logo (6-5/8" x 7-1/8") IH/Farmall $13.50 Miscellaneous International Vinyl cut (23-1/2") DEC453 $24.00 Turbo Decal Pair 1066, 1256, 1456, 1466, 1566 (White & Black) Vinyl cut DEC522 DEC450 $6.95 $9.65 Turbo Decal Pair 1206 (White & Gold) Vinyl cut Steering Wheel Cap Insert (For 86 series; Serviceable for other applications using IHS781 cap) (1-3/4" O.D.) Hydra Touch Handle Mylar Decal (For 240, 340, 460, 560, 660), Replaces: 369778R1, 127741 (2" O.D.) NOTE: Vinyl cut w/ white letters. capacities (anti-freeze, crankcase, etc.) and adjustment procedures Service manual reprints - Printed in USA A Service Manual Reprint with wiring diagrams tells you how to take the tractor apart, how to fix it and how to put it back together again. It is a reprint of the manual that the factory furnished the dealer’s shop service department, and was not sent or given to individual retail customers. It deals with repairs in the language of a mechanic. Often times it includes valuable information as to specifications, torques, etc. A service manual reprint will offer many short cuts and save you time! Order # Price REP081 $40.50 Farmall Cub before 1960 (Operator's manual) NOTE: Includes electrical wiring diagram. REP006 $67.95 Cub, Cub LoBoy (Service Manual) NOTE: Includes electrical wiring diagram. An I & T Shop Service™ Manual tells you how to take a IH54 $12.00 tractor apart, how to fix it and how to put it back together Cub 54 A Leveling & Grading Blade (Operator's & Set Up Manual) REP082 $40.50 Farmall A, AV (Owner's manual) REP050 $14.50 Farmall A (Serviceman's manual) REP008 $40.50 A, AV, B, BN (IH Blue Ribbon Service manual) NOTE: Includes electrical wiring diagram. REP095 $34.95 Super A, Super AV (Operator's manual) NOTE: Includes electrical wiring diagram. IH20 $12.00 McCormick Leveling & Grading Blade for Farmall A, Super A (Owner's & Set Up manual) REP088 $28.95 McCormick-Deering A-192 Farmall Tractor Plow (Setting Up Instructions / Parts List) (Owner's manual) REP096 $34.95 B (1939-1948) (Operator's manual) NOTE: Includes electrical wiring diagram. REP097 $34.95 C (Operator's manual) NOTE: Includes electrical wiring diagram. in the language of a mechanic with an easy to use format. They include valuable information as to specifications, torques, etc illustrated by exploded views and photos. If you are in serious repairs or restoration, you need an I & T Shop Service™ Manual. It will offer many short cuts and save you time! Order # Price Description IH2 $34.95 F12, F14, F20, F30, W12, W30, W40 IH8 $31.95 Super & Non-Super series A, B, C, H, M, MD, MTA, MTAD, Cub (prior 1957), W4, W6, WD6, W6TA, W6TAD, W9 & WD9 IH10 $31.95 300, 300 Utility, 350, 350 Utility, 350D, 350D Utility, 400, 400D, W400, W400D, 450, 450D, W450, W450D (All gas, diesel) REP1742 • $49.95 A, AV, B, BN; Cultivisions REP1745 • $59.95 Supers: A, A1, AV, AV1; Cultivisions $40.50 H, 4 series (IH Blue Ribbon Service training course) $53.75 Farmall H (Operator's manual) NOTE: Includes electrical wiring diagram. REP051 $14.50 Farmall H (Serviceman's manual) REP1743 • $49.95 Super C International Harvester Collection: 100, 130, 140, 200, 230, 240, 330, 340, 354, 364, 384, 404, 424, 444, 504, 2404 models, 2424, 2444, 2504 models, B-275, B-414 NOTE: Includes electrical diagrams. REP007 $62.15 M, MD, 6 series, Tractors, Crawler Tractors, Power Units (IH Blue Ribbon Service Manual Reprint) REP098 $34.95 M, MV gas or LP 1939-1952 (Operator's manual) NOTE: Includes electrical wiring diagram. REP1746 • $59.95 H, HV International Collection: 544, 656, 666, 684, 686, 784, 884, Hydro 70, Hydro 84, Hydro 86, Hydro 100 models, Hydro 186, 1466, 1468, 1566, 1568, 1586 REP101 $36.95 Super MTA gas (Operator's manual) NOTE: Includes electrical wiring diagram. REP100 $36.95 Farmall 300 Row-Crop (Operator's manual) NOTE: Includes electrical wiring diagram. 706, 756, 806, 856, 1206, 1256, 1456, 2706, 2756, 2806, 2856, 21206, 21256 $34.95 REP1808 • $39.95 154, 184, 185 REP026 $31.95 DEC450 REP1740 • $49.95 Cub, LoBoy (1947-79) NOTE: Does NOT include 154, 184, 185. REP010 IH32 $34.95 parts manual! Super C (Operator's manual) NOTE: Includes electrical wiring diagram. 460, 560, 606, 660, 2606 $34.95 A Parts Manual (reprint only) has exploded views of all parts on the tractor. With numbered pictures giving you great detail on assembly and disassembly. It also gives you a guide, with numbers, for ordering parts, and makes you seem much more informed when talking with a dealer. Many service manuals, after telling you how to disassemble & repair in detail, will simply say "reassemble". If you have your PTO in the wash tank, in pieces, without notes, you have a problem. The parts manual can help you out with an exploded view of the PTO unit, and you can see immediately how it all goes back together. You need a $34.95 $31.95 $31.95 Description Printed in USA REP099 IH25 IH203 336 car. This manual gives the owner-operator instructions, shift patterns, International Harvester Tractor Data Book by Guy Fay again. These are authentic manuals that deal with repairs IH201 DEC461 DEC522 It can be compared to the manual you receive in the glove box of a new your tractor. I & T Shop Service™ manuals Printed in USA IH202 DEC453 manual that was given to the ultimate consumer by the manufacturer. Data book BOK054 • $19.95 Everything you need to know about International tractors in a handy pocket-sized book. This well-researched book offers everything from serial numbers, annual production, and technical data to optional accessories and much more. (Sftbd., 4-1/2" x 7-1/2", 192 pgs., 50 b&w) IH50 DEC463 Owner’s Manual is the manual that came with the tractor. It is the Build your "how-to" library with us. Reprint manuals are a must for your classic IH/Farmall. View tutorials and most requested repair videos at SteinerTractor.TV Parts manual reprints IH Cub 154 LoBoy, IH Cub 184 LoBoy, IH Cub 185 LoBoy, Farmall Cub, IH Cub, IH Cub LoBoy NOTE: Includes electrical wiring diagram. International Collection: 454, 464, 484, 574, 584, 674, 766, 786, 826, 886, 966, 986, 1026, 1066, 1086 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Operator's/service manual reprints continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Miscellaneous DEC461 $24.00 An Operator’s Manual (reprints only) sometimes referred to as the (brakes, clutch, etc). This is a very useful and valuable tool in operating DEC463 DEC455 Operator manual reprints - Printed in USA IH/Farmall DEC414 Manuals, videos REP1741 • $49.95 C REP1749 • $59.95 M, MD, MV, MDV REP1806 • $49.95 100, 130, Early 140 up to SN: 23300 REP1811 • $64.95 200, 230, 240 337 Miscellaneous IH/Farmall Operator, service manual reprints - Printed in USA cont... Order # Price Description REP116 $36.95 International 300 Utility (Operator's manual) NOTE: Includes electrical wiring diagram. REP115 $36.95 International 350 Utility gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP117 $36.95 Farmall 350 Row-Crop (Operator's manual) NOTE: Includes electrical wiring diagram. REP102 $36.95 Farmall 400 gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP103 $36.95 Farmall 450 gas, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP104 $31.95 Farmall 560 gas (Operator's manual) NOTE: Includes electrical wiring diagram. REP105 $31.95 Farmall 460 diesel, I-560 diesel (Operator's manual) NOTE: Includes electrical wiring diagram. REP118 $45.95 Farmall & Int. 656 gas, diesel (Operator's manual) NOTE: Includes electrical wiring diagram. REP2083 $9.95 Fits: M, MD, W6, WD6, (M & W hand clutch, 12 pages total) NOTE: Parts list also covers H, W4, Super M, Super MD, Super H. REP119 $39.95 Farmall & International 806 gas, diesel, LP (Operator's manual) NOTE: Includes electrical wiring diagram. REP106 $36.95 1206 Farmall & International (Operator's manual) NOTE: Includes electrical wiring diagram. REP120 $36.95 International 766, 966, 1066, 1466 (Operator's manual) REP086 $34.95 GPA-1 Genuine IH "Parts - Accessories" Tractors & Engines (Service Items & Accessories manual. Also covers A thru 660 tractors) REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator. REP2652 $12.50 Behlen Power Steering (Service & parts manual) NOTE: Includes installation, parts list & service information for the live hydraulic Behlen pump & torque generator. Show your IH/ Farmall pride with our tractor yard spinner! MIS132 • $77.75 H style Awesome is size and realism, this yard / garden spinner shares the exact detailing as the real thing! Made with fade resistant SolarMax & SunTex fabric this spinner withstands daily UV rays, rain & snow. Includes a heavy duty fiberglass pole & a ground stake (Licensed; 43" x 27-1/2", 18-1/2" dia.) 338 Engine rebuild DVD USA made Shows how to completely rebuild the tractors' engine. You will see the engine disassembled down to the bare block & then rebuilt step by step is an easy format. VID19D • $24.95 Farmall Cub, Cub LoBoy VID15D • $24.95 Farmall Super A, A, BN, C, Super C, 100, 200 series VID08D • $24.95 Farmall Super MTA, M, H, Supers 300, 400 series, IH 1 series Tune-up DVD USA made Includes rebuilding the carburetor & distributor, oil & filter change, brake adjustment & more! VID20D • $24.95 Farmall Cub, Cub LoBoy VID16D • $24.95 Farmall Super A, A, BN, C, Super C, 100, 200 series VID09D • $24.95 Farmall M, H, Supers, 300, 400, McCormick W, O series, IH 1 series Torque amplifier DVD USA made Looks at one of the most common problems with the Farmalls. Shows you step by step instructions on how to repair your torque-amplifier. VID10D • $24.95 Farmall Super MTA, (300, 400 series TA), Super W6TA, 460, 560, 656TA STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Similar documents
Engine parts - Steiner Tractor Parts
bolts.....................................................301
boots....................................................300
cover....................................................299
disc bra...
International 5 - Steiner Tractor Parts
adjusting bolts.........................312, 313
ball......................................................... 313
boots..................................................... 311
bands............
Four Generations - Steiner Tractor Parts
bolt spacer..................................278
clamps.................................194, 195
connecting rod...........................278
raincaps..........................................
A brief history about Ford
brake adjusting hole cover........193
disc brake ball................................193
dust shield.......................................193
felt seal........................................
Ford 4 - Steiner Tractor Parts
riveting tools.................................... 185
Minneapolis Moline - Steiner Tractor Parts
riveting tools.....................................535
spring...................................................535
C
Caps
air cleaner...........................................528
distributo...
Minneapolis Moline - Steiner Tractor Parts
bushing and shim kit...................547
caps....................................................546
clamp.................................................547
clips.............................
Allis Chalmers - Steiner Tractor Parts
clips...................................................27
coils...................................................27
dust cover.......................................27
gasket...................
Allis Chalmers - Steiner Tractor Parts
mounting kit.........................................31
pulleys..............................................30, 31
Amp gauges................................................22
B
Battery boxes, ...
Case - Steiner Tractor Parts
"1936 C Case" Ken Scanian, Brownsville, Ontario Canada