Ford 4 - Steiner Tractor Parts

Transcription

Ford 4 - Steiner Tractor Parts
4 Ford
Michigan is the birthplace of the modern automobile and Henry Ford
was the first to imagine the modern assembly line manufacturing style.
The 9N & 2N Ford tractors designed by Harry Ferguson were highly
innovative, with other tractor manufacturers eventually adopting the
Ford style three point hitch weight transfer system.
View more pictures & tractor
stories in our digital book!
www.SteinerTractor.com >
Steiner Community >
Tractor Stories
Photos submitted by folks just like you!
A. "Ford 5000 - Ready to work" Carol Kuhn, Oxford, NY
B. "1955 Ford 640" Mike Boruff, Martinsville, IN
C. "1972 Ford 3000" Randy Waldron, Rochester, NY
D. "The Ford Model 8N" Tim Daley, Lapeer, MI
E. "1953 Ford Golden Jubilee" Tommy Burchett, Tuscaloosa, AL
Our complete album can be viewed at
http://www.steinertractor.com/tractor-photo-winners.html
A
B
C
D
D
134
E
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Ford: Alphabetical index
B
Base engine kits................................. 140
Battery cables..................................... 156
Battery covers............................156, 157
Battery hold downs, parts
bolts.................................................... 157
hold downs....................................... 157
retainer............................................... 157
rod........................................................ 157
Battery trays........................................ 157
Brake parts
backing plate................................... 185
bonded brake shoe....................... 185
bonded brake shoe sets......184, 185
brake adjusting hole cover......... 185
disc brake ball.................................. 185
dust shield......................................... 185
felt seal............................................... 185
lining set............................................ 184
parking brake lever........................ 185
repair kits........................................... 185
riveting tools.................................... 185
B
Brake parts cont...
screw................................................... 185
springs................................................ 185
C
Caps
air cleaner.......................................... 171
distributor......................................... 159
front hub............................................ 191
fuel....................................................... 173
oil fill / breather............................... 144
power steering................................ 179
pre cleaner........................................ 172
PTO...................................................... 190
radiator............................................... 151
rain....................................................... 146
steering wheel................................. 177
Carburetors, parts
adjustment needle assy............... 148
bushing.............................................. 148
carburetors....................................... 147
discs..................................................... 148
elbow strainer assy........................ 147
floats................................................... 149
gaskets............................................... 148
needle float valves......................... 148
nozzles................................................ 148
repair kits..................................149, 150
throttle shaft.................................... 148
venturi................................................ 148
Choke parts
cables.................................................. 147
knob.................................................... 147
rod........................................................ 147
Cigarette lighters............................... 158
Clutch, trans. parts
alignment tool................................. 175
bearing spring................................. 175
cable.................................................... 176
control selector cover................... 176
control selector lever.................... 176
disc....................................................... 175
drain plugs........................................ 176
gasket................................................. 176
input shaft retainer........................ 175
kits....................................................... 175
seal....................................................... 176
throw out bearing carrier............ 175
throw out bearings........................ 175
torque limiter disc.......................... 175
Countershafts..................................... 176
Crankshaft, parts
bearings....................................142, 143
crankshaft......................................... 141
gears.................................................... 142
pulleys................................................ 142
seals..................................................... 141
D
Dash light, parts
bulbs................................................... 165
dash lights......................................... 165
Dash panel warning lights............. 154
Data plates........................................... 178
Decals.................................................... 195
Differential side cover gasket........ 185
Dipsticks............................................... 145
Distributor parts
breaker plate assy........................... 159
caps..................................................... 159
clips..................................................... 159
coils.............................................158, 159
distributors....................................... 159
dust cover.......................................... 159
gasket kit........................................... 159
grommet............................................ 160
ignition tune up kits.............160, 161
primary conductor......................... 159
resistor................................................ 159
retainer............................................... 160
retaining wire................................... 158
rotor buttons.................................... 161
shaft.................................................... 159
spark plug wire sets....................... 160
spark plugs....................................... 160
spring clip......................................... 159
Drawbars, parts
assys.................................................... 193
bolt kit................................................ 193
clevis................................................... 193
drawbars............................................ 193
hanger................................................ 193
lock...................................................... 193
pins...................................................... 193
E
Electric outlet socket, parts
boot..................................................... 156
connector plug................................ 156
socket................................................. 156
Emblems / nameplates
bracket............................................... 168
clip....................................................... 168
emblems...................................167, 168
Engine gasket sets............................ 140
Exhaust pipes...................................... 147
F
Fan belts.......................................152, 153
Fan blades............................................ 152
Fan shrouds, parts
fan shrouds....................................... 152
screw kit............................................. 152
Fenders, parts
assys.................................................... 183
bolt kits.....................................183, 184
light brackets................................... 184
painting mask kit............................ 184
rivet..................................................... 184
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
F
Fenders, parts cont...
skins.................................................... 183
Flywheel ring gear............................ 145
Fuel filters
element.............................................. 174
fuel filters........................................... 174
Fuel gauges......................................... 154
Fuel lift pump...................................... 150
Fuel lines............................................... 174
rubber bumper................................ 174
Fuel sending units............................. 155
Fuel tanks, parts
caps..................................................... 173
gasket................................................. 173
screen................................................. 173
shut off valves.................................. 173
tanks...........................................172, 173
Fuse holder.......................................... 158
G
Gauges
amp..................................................... 153
cluster gauges................................. 155
fuel....................................................... 154
oil pressure....................................... 154
water temperature......................... 155
Gear shift boot.................................... 177
Gear shift knobs................................. 177
Gear shift lever, parts
decal.................................................... 176
gaskets......................................176, 177
levers................................................... 176
pin........................................................ 176
shift cover assy................................ 177
shifter plate....................................... 176
spring.................................................. 176
Gears
flywheel ring.................................... 145
Generators, parts
cut out assy....................................... 163
generators......................................... 163
pulleys................................................ 163
tag........................................................ 163
Governors, parts
assemblies......................................... 150
gaskets............................................... 150
mount................................................. 150
repair kits........................................... 150
springs................................................ 150
Grilles, parts
bottom grille sections................... 169
bumper kit........................................ 169
grilles.........................................168, 169
mounting studs............................... 169
screen................................................. 169
shell..................................................... 169
spring.................................................. 169
stud and knob................................. 169
Index continues on next page
135
Ford
A
Air cleaner assembly, part
assy...................................................... 171
bolt kit................................................ 171
cap....................................................... 171
clamps................................................ 171
filter element.................................... 171
gasket................................................. 171
hoses................................................... 171
oil cups............................................... 171
spring clip......................................... 171
tubes................................................... 171
vacuator valve................................. 172
Alternators, parts
alternators......................................... 163
bolt kit................................................ 164
bracket kits....................................... 164
conversion kits................................ 164
mounting kits.................................. 164
pulleys.......................................163, 164
Amp gauges........................................ 153
Axle, parts
axle shaft........................................... 186
clamp lock nut................................. 186
front axle support pins................. 181
front pivot bushing........................ 181
gaskets............................................... 187
nuts...................................................... 186
paper gaskets / shims................... 186
rear axle nut and snap ring kit... 186
rear hub assy.................................... 186
seals............................................186, 187
shaft collar........................................ 186
shaft cone.......................................... 186
shaft cup............................................ 186
snap ring............................................ 186
studs.................................................... 186
washer................................................ 186
Ford: Alphabetical index cont...
Ford
G
Grilles, parts cont...
top grille section............................. 169
upper grille assy.............................. 169
H
Hand cranks......................................... 168
Headlights, parts
bezel.................................................... 167
bracket............................................... 165
bulbs..........................................165, 167
headlights......................................... 165
reinforcement plate....................... 165
rings.................................................... 165
washer.......................................165, 167
wings.................................................. 165
Hood, parts
air cleaner funnel assy.................. 170
air cleaner grille doors.................. 170
bolt kits.............................................. 170
bumpers............................................ 170
door..................................................... 170
door handle...................................... 170
door hinge........................................ 170
hood.................................................... 169
ornament........................................... 170
screen................................................. 170
screw kit............................................. 170
side panels........................................ 170
spring.................................................. 170
Hydraulic lift parts
cover repair gasket kits................ 188
cylinder.............................................. 187
draft control plunger.................... 187
gasket................................................. 188
hydraulic valve adaptor............... 187
lever control friction disc............. 187
lever control friction plate........... 187
lift piston........................................... 187
o-ring.................................................. 187
oil level dipsticks............................. 188
ring kit................................................ 187
washer................................................ 187
Hydraulic pump parts
assembly............................................ 188
control valve assy........................... 188
drive hub adaptors........................ 188
drive shafts....................................... 188
rebuild kit.......................................... 188
safety valve assy.............................. 188
valve chamber assys...................... 188
I
Ignition parts
breaker plate assy........................... 159
caps..................................................... 159
clips..................................................... 159
coils.............................................158, 159
distributors....................................... 159
dust cover.......................................... 159
gasket kit........................................... 159
136
I
Ignition parts cont...
grommet............................................ 160
ignition tune up kits.............160, 161
primary conductor......................... 159
resistor................................................ 159
retainer............................................... 160
retaining wire................................... 158
rotor buttons.................................... 161
shaft.................................................... 159
spark plug wire sets....................... 160
spark plugs....................................... 160
spring clip......................................... 159
Inner tube valves, part
nut........................................................ 192
valves.................................................. 192
L
Light switches............................164, 165
M
Manifolds, parts
gasket material................................ 139
gaskets............................................... 139
hardware........................................... 139
manifolds........................................... 139
washer kit.......................................... 139
Manuals........................................196, 197
Mufflers
adaptor............................................... 146
bracket............................................... 146
clamps.......................................145, 146
heat shield........................................ 147
mufflers.............................................. 146
N
Nosecone............................................. 169
O
Oil / breather caps............................. 144
filter element.................................... 144
vent breather element................. 144
vent breather gasket..................... 144
Oil filters................................................ 145
Oil pan drain plug............................. 144
Oil pan parts
drain plug.......................................... 144
drain plug screen............................ 144
gaskets......................................144, 145
Oil pressure gauges, parts
copper line kit.................................. 154
fittings................................................ 154
gauges................................................ 154
Oil pump relief valve plunger....... 144
Oil pump relief valve spring.......... 144
Oil pump repair kit............................ 144
P
Pinion shaft seal................................. 186
Piston pump, parts
bearing............................................... 189
P
Piston pump, parts cont...
changeover plate........................... 189
cup....................................................... 189
gasket kit........................................... 189
gear housing.................................... 189
hydraulic pump............................... 189
main drive gear............................... 189
manifold (lines)............................... 189
needle bearing assy....................... 189
oil seal................................................. 189
proof meter drive bolt.................. 189
repair kit............................................. 189
shaft.................................................... 189
Piston ring sets................................... 140
Power steering parts
cap....................................................... 179
cylinder end..................................... 180
cylinders............................................ 179
pulley.................................................. 179
pump.................................................. 179
Pre-cleaner parts
bowls................................................... 172
caps..................................................... 172
caps assys.......................................... 172
covers.................................................. 172
PTO parts
caps..................................................... 190
conversion assys....................189, 190
gasket................................................. 190
knob.................................................... 190
over-running clutches.................. 190
seals..................................................... 190
shifter support housing............... 190
R
Radiator, parts
bolt kit................................................ 151
caps..................................................... 151
clamps................................................ 152
drain plug.......................................... 151
hood pad........................................... 151
hoses..........................................151, 152
mounting pad.................................. 151
radiators............................................. 151
Radius rod parts
ball cap............................................... 180
ball socket......................................... 180
Raincaps................................................ 146
Rear end overhaul gasket kit......... 186
Rims, rear and front
bearing kits....................................... 191
bolts.................................................... 193
front hub cap................................... 191
front wheel hub.............................. 191
inner tube valves............................ 192
nuts............................................. 190-193
rear rim bolt assys.......................... 192
rims............................................. 191-193
seals..................................................... 191
stops.................................................... 193
R
Rims, rear and front cont...
studs...........................................190, 192
tires, tubes......................................... 192
washer................................................ 192
wheels................................................ 191
Running boards, parts
hardware kit..................................... 184
rear bracket....................................... 184
running boards............................... 184
S
Seats, parts
adjustment handle........................ 182
assy...................................................... 182
bearing............................................... 183
bolt...................................................... 182
bumper.............................................. 182
bushings............................................ 182
coil....................................................... 182
hinge................................................... 182
pads..................................................... 183
pan repair kit.................................... 181
pans............................................181, 182
retaining clip.................................... 182
shock absorbers.............................. 182
springs.......................................181, 182
support rod....................................... 182
Sediment bowl assys., parts
bail assys............................................ 173
bolts.................................................... 173
gaskets............................................... 173
glass bowls....................................... 173
screens............................................... 173
sediment bowl assys..................... 173
Sleeve & piston kit............................. 140
Spindle parts
bearing............................................... 181
bushing.............................................. 181
bushing kit........................................ 181
seal....................................................... 181
Starter hand cranks........................... 168
Starters, parts...................................... 161
covers.................................................. 161
drives.................................................. 161
key........................................................ 162
repair studs....................................... 161
starter solenoids............................. 161
switches............................................. 162
tags...................................................... 161
Steering parts
bushings............................................ 178
column grommets......................... 178
gear sectors...................................... 178
seals..................................................... 179
sector hardware and seal kit...... 179
shaft.................................................... 179
shaft bearing kits............................ 179
top bearing steering shaft kit.... 179
Steering wheels, parts
center caps / emblems........177, 178
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Ford: Alphabetical index cont...
S
Steering wheels, parts cont...
cover................................................... 179
nuts.............................................177, 178
plates.................................................. 178
spinner............................................... 178
steering wheels......................177, 178
washers.............................................. 177
U
Umbrellas............................................. 195
Ford
T
Tachometers, parts
cables.................................................. 156
tachometers..................................... 156
Tail lights, parts
bezels.................................................. 167
brackets............................................. 167
bulbs..........................................166, 167
gaskets............................................... 167
lens.............................................166, 167
tail lights...................................166, 167
washer................................................ 167
Thermostats, parts
gasket................................................. 152
thermostats...................................... 152
Three point hitch, parts
bracket............................................... 194
bushing.............................................. 194
drawbar chain kit............................ 194
eyelet assy kit................................... 194
fork....................................................... 194
gasket................................................. 194
leveling box assys........................... 194
leveling rod....................................... 194
lift arm support pin kit................. 194
lift arms.............................................. 194
pins...................................................... 194
rockshaft arm................................... 194
stabilizer bar..................................... 195
stabilizer kit...................................... 195
top links............................................. 194
Throttle parts
grommet............................................ 174
lever..................................................... 174
linkages.....................................174, 175
plates.................................................. 174
rod........................................................ 175
screw kit............................................. 174
washer................................................ 174
Tie rod, parts
tie rod assys...................................... 180
tie rod boots............................180, 181
tie rod ends....................................... 180
Timing gear cover gaskets............. 142
Tires, tubes
nut........................................................ 192
tires...................................................... 192
tubes................................................... 192
valves.................................................. 192
Toolboxes............................................. 184
Top-links, parts
pins...................................................... 194
T
Transmission, clutch parts
alignment tool................................. 175
bearing spring................................. 175
cable.................................................... 176
control selector cover................... 176
control selector lever.................... 176
discs..................................................... 175
drain plugs........................................ 176
gasket................................................. 176
input shaft retainer........................ 175
kits....................................................... 175
seal....................................................... 176
throw out bearing carrier............ 175
throw out bearings........................ 175
torque limiter disc.......................... 175
V
Valve cover gaskets........................... 141
Valve cover stud grommets........... 141
Valve grind gasket sets.................... 141
Videos.................................................... 197
W
Warning lights, parts........................ 166
bulbs................................................... 166
lens...................................................... 166
Water pumps....................................... 153
Water temperature gauges............ 155
Weight mounting wedge............... 193
Wheels, front and rear
bearing kits....................................... 191
bolts.................................................... 193
front hub cap................................... 191
front wheel hub.............................. 191
inner tube valves............................ 192
nuts............................................. 190-193
rear rim bolt assys.......................... 192
rims............................................. 191-193
seals..................................................... 191
stops.................................................... 193
studs...........................................190, 192
tires, tubes......................................... 192
washer................................................ 192
wheels................................................ 191
Wiring harness kits............................ 157
clips..................................................... 158
Work lights, parts
springs................................................ 167
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
137
Ford: Beginning serial numbers
1962....... 08B-740000-A
1963....... 08C-781370-A
1964.......08D-900000-A
9N, 2N, 8N
serial number location
Ford
9N, 2N, 8N serial and
engine numbers are
incorporated on left
hand side of engine
block.
Model 9N
1939................................. 1
1940....................... 10234
1941....................... 45976
1942....................... 89888
1943.....................105412
Model 2N
1942....................... 99003
1943.....................105375
1944.....................126538
1945.....................169982
1946.....................198731
1947.....................258504
Model 8N
1947................................. 1
1948....................... 37908
1949.....................141370
1950.....................245637
1951.....................343593
1952.....................442035
Late Model NAA, 600,
700, 800 & 900 serial
number is located
on left hand side of
transmission case at
point of joining with
starting motor.
Model NAA
1953................................. 1
1954....................... 77475
Series 600, 700, 800,
900
1954................................. 1
1955....................... 10615
1956....................... 77271
1957.....................116368
Series 601, 701, 801,
901
1957..........................1001
1958....................... 11977
1959....................... 58312
1960.....................105943
138
1953 - 1964
serial number location
1961.....................131427
1962.....................155531
Series 2000 (4-Cyl.),
4000 (4-Cyl.) & 6000
1962..........................1001
1963....................... 11948
1964....................... 38931
2000, 3000, 5000,
6600, 7000 serial
and model numbers
are stamped on
the upper right
front corner of the
transmission. Engine
serial number is
stamped on left
or right pan rail of
block.
6000 serial number is
located on left hand
front side of trans
housing.
8000 & 9000 ID is
located inside the
radiator filler cap
access door.
Series 2000 (3-Cyl.) 9000 US Production
1965.................. C100000
1966.................. C124200
1967.................. C161300
1968.................. C190200
1969.................. C226000
1970.................. C257600
1971.................. C292100
1972.................. C327200
1973.................. C367300
1974.................. C405200
1975.................. C450700
Fordson
1917................................. 1
1918............................ 255
1919....................... 34422
1920....................... 91712
1921.....................162667
1922.....................199448
1923.....................268433
1924.....................370331
1925.....................453341
1926.....................557509
1927.....................645611
1928.....................739581
1929.....................747584
1930.....................757265
Dexta serial number
stamped on left hand
clutch housing. The
engine number is
stamped on left hand
side of block.
Fordson Dexta
1958....................... 16066
1959....................... 22427
1960....................... 45216
1961....................... 72003
Fordson Super Dexta
1961...... 09A-312001-M
1962.......09B-070000-M
1963....... 09C-731454-A
1964.......09D-900000-A
Fordson Major Diesel
& Fordson Power
Major serial and
engine numbers are
stamped on left hand
flywheel housing or
right side of engine
block.
Fordson Major diesel
series
1953...................1247381
1954...................1276857
1955...................1322525
1956...................1371418
1957...................1412409
1958...................1458381
Fordson Power Major
series
1958...................1481091
1959...................1494448
1960...................1538065
1961...................1583906
Fordson Super Major
series
1961........08A-300001M
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Manifolds, parts
Order #
Price
FDS001
$70.50
FDS001GK3
$5.80
$119.95
FDS002GK
$9.75
FDS020
$18.95
1-5/8"
FDS021
$2.00
$18.95
2"
Manifold
Fits: 9N, 2N, 8N
Replaces: 9N9425
Gasket Set (For FDS001)
Replaces: 9N9447, 9N9448
USA made
Gasket (For FDS002B)
Replaces: 310074, 9N9447, C0NN9448C,
EAF9447B, NAA55232A USA made
Exhaust Elbow fits: 'Some' NAA,
Jubilee, 501, 600, 700, 2000 4-cyl. series
(1953-64); Also fits 'some' 800, 900 w/
FDS121 muffler, Replaces: NAA55250B
(1-5/8" O.D.)
Exhaust Elbow to Manifold Gasket
(For FDS020 Elbow), Replaces:
NAA55232A (2" center hole, 3-3/8" c.c.
bolt pattern) USA made
Exhaust Elbow Fits: 'Some' 601, 800,
900, 1801, 2000, 4000 4-cyl. gas series
(thru 1964) w/ FDS398 muffler
Replaces: 310075
(2" O.D.)
$2.00
Exhaust Elbow to Manifold
(For FDS021 Elbow), Replaces: 310074
(2-1/4" center hole, 3-3/8" c.c. bolt
pattern
FDS076GK
$8.50
Gasket fits: 2000, 2110, 3000, 3400, 3500,
4000, 4110, 4400, 4500 3-cyl. gas, diesel
w/ vertical exhaust
Replaces: C5NE9448A
FDS094
$77.85
$5.95
ABC2511
$3.95
Price
$5.95
ABC1878
$1.75
FDS1721
$7.95
Manifold fits: NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. gas
series (1953-64), Replaces: B9NN9425A
FDS021GK
FDS094GK
Order #
FDS233
Exhaust Manifold
Fits: Fordson Dexta, Super diesel
w/ vertical exhaust
Replaces: 957E-9430A
Manifold Gasket Set
Fits: Dexta, Super Dexta
Replaces: 957E9448 NOTE: Fits vertical
or horizontal exhaust.
Description / Application
Manifold Nut & Washer Kit (For FDS001)
Replaces: 33816S, 34808S
((4) Brass nuts (7/16"-20); Yellow zinc
plated lock washers (7/16"))
NOTE: If only a single nut is needed
order ABC1878.
Manifold Nut & Lockwasher
(For FDS001, FDS002B)
(7/16" - 20 NF)
NOTE: Brass nut, yellow zinc
lockwasher. Sold individually.
Manifold Nut & Washer Kit
(For FDS002B)
Replaces: 34673S8, 33816S
(7/16"-20 NF) NOTE: If only a single nut
is needed order ABC1878.
Gasket material
Order #
Price
ABC448
$17.90
ABC1830
$13.95
ABC1835
$10.95
ABC1844
$15.95
ABC1846
$22.95
Turbocharger to Exhaust Manifold
Mounting Gasket fits: 8630 thru TW35
Replaces: D6NN6N640A USA made
NOTE: See website for full
applications.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Engine parts
FDS020GK
Description / Application
Ford
FDS002B
Manifold hardware
Description / Application
Exhaust Manifold Gasket Material
(1/16" thick x 12" wide x 28-1/2" long)
USA made
NOTE: Perforated steel core.
Cork / Rubber Rollpack Gasket Material
For making general purpose gaskets
(1/16" thick x 12" wide x 24" long)
USA made NOTE: Do not use for high
temperature applications.
Cork / Rubber Rollpack Gasket Material
For making general purpose gaskets
(3/32" thick x 12" wide x 24" long)
USA made NOTE: Do not use for high
temperature applications.
Gasket Paper
For making general purpose gaskets
(0.0160" thick x 18" wide x 98" long)
USA made NOTE: Do not use for high
temperature applications.
Gasket Paper
For making general purpose gaskets
(0.0275" thick x 20" wide x 108" long)
USA made NOTE: Do not use for high
temperature applications.
139
Piston ring sets - USA made
Sleeve & piston kits
Do not order by tractor model only. To ensure you order the
correct rings, you will need the following information:
NOTE: Each kits include sleeves, aluminum
2 Thickness of
1 Bore size
each ring.
pistons, piston ring sets, piston pins & pin
retainers. Most other sets are available by
3 Quantity of each ring
special order. Verify engine is sleeved prior
thickness per piston.
to ordering.
Piston rings can not be returned if opened. Call or email for
price and availability of other sizes.
Order #
Price
Application
FDS2088
$74.85
FDS2092
$103.95
Order #
Price
Description / Application
FDS3087
$312.50
NEW! Fits: Jubilee, 501, 600, 601, 700, 701,
(2000 4-cyl.) gas w/ sleeved engine
(1953-64), Replaces: CPN6055A
(3.500" overbore)
FDS3090
$298.50
NEW! Fits: 800, 801, 900, 901, (4000 4-cyl.)
gas w/ sleeved engine (1954-64)
Replaces: FPN6055A
(4" overbore)
Fits: Some 2N, 8N, 9N 4-cyl.
Replaces: 9N6149A
FDS2088: 3-3/16" bore, (3) 0.093" compression
rings, (1) 0.156" oil ring
FDS2092: (3-3/16" bore, (2) 0.093"
compression rings, (2) 0.187" oil rings)
$121.75
Engine parts
Ford
ABC2072
Fits: 'Some' NAA, 501, 600, 700, 2000
4-cyl. (1953-64)
Replaces: EAE6149A, 86539354
Engine gasket sets
ABC2072: 3-7/16" bore, (3) 0.093"
compression rings, (2) 0.187" oil rings
NOTE: On some engines discard 1
compression & oil ring per cylinder.
FDS2098
$75.75
NOTE: Includes all gaskets & crankshaft seals for major
overhaul.
FDS2102
Price
FDS1323
$32.80
Fits: 'Some' Jubilee, NAA, 501, 600, 700,
2000 4-cyl. series (1953-64) gas, LP
FDS2098: 3-1/2" overbore, (2) 0.093"
compression rings, (1) 0.187" oil ring
FDS2100
Order #
Fits: 'Some' 800, 900, 4000 4-cyl. series
$152.00 (1954-64) gas, LP
Replaces: EAF6149A, 86539359
$66.85
FDS2100: 3.900" bore, (2) 0.093" compression
rings, (1) 0.187" oil ring
FDS2102: 4" overbore, (3) 0.093" compression
rings, (1) 0.187" oil ring
Application
Fits: 9N, 2N, 8N (Front & side mount
engines)
FDS1327
$83.50
FDS1325
$87.10
Engine overhaul kits
Fits: NAA, 600, 700 series gas, LP series
(1953-57) w/ 7/16" head bolts
USA made NOTE: Fits 134 C.I. engines
w/ 7/16" head bolts.
Fits: 601, 800 thru 4000 4-cyl. (1958-64)
w/ 1/2" head bolts
USA made NOTE: Fits 134 & 172"
engines w/ 1/2" head bolts.
Inframe or out of frame kits are available by
special order for 9N, 8N, NAA, 501, 600, 700,
800, 900, 2000, 3000, 4000, 5000 thru TW35.
For price & availability call techinal support
or visit http://www.steinertractor.com/
special-order
Cylinder head, parts
Order #
Price
FDS036
$192.50
FDS406
$4.50
FDS466
$158.50
Base engine kits
NOTE: Each kit includes (4) sleeves,
standard 3.187" bore 3-ring pistons,
rings & wrist pins, locks, pin bushings
& complete gasket set w/ crankshaft
seals. Measure sleeve thickness before
ordering.
Order #
Price
Application
FDS2970
$235.00
NEW! Fits: 9N, 2N, 8N
(0.040" thick sleeves)
FDS2976
$235.00
NEW! Fits: 9N, 2N, 8N
(0.090" thick sleeves)
140
Description / Application
Cylinder Head
Fits engines w/ front or side mounted
distributors: 9N, 2N, 8N
Replaces: 8N6050A
Stud (For FDS036)
(7/16" dia. x 3" long NC-NF)
NOTE: Used for 15 of the 18 studs per
engine; Sold individually.
Valve Train Kit (For FDS036)
Fits: 9N, 2N, 8N (All w/ rotating
exhaust valves)
NOTE: Includes: NEW valves, guides,
guide clips, springs, locks, retainers,
rotators.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Cylinder head, parts cont...
Order #
Price
FDS464
$124.95
Valve grind gaskets cont...
Description / Application
Valve Train Kit
Fits: Jubilee thru 4000 4-cyl. (195364) (All w/ 134, 172, 192" 4-cyl. gas
engines) NOTE: Kit includes: NEW
valves, guides, springs & locks. Does
not include retainers.
Order #
Price
FDS1767
$6.50
Pushrod Side Cover Gasket
Fits following gas, LP, diesel: NAA thru
4000 4-cyl. (1953-64)
Replaces: EAF6521D
FDS1770
$4.95
Pushrod Side Cover Grommets
Fits following gas, LP, diesel: NAA thru
4000 4-cyl. (1953-64)
Replaces: CONN6589A NOTE: 3 used
per tractor; Sold in sets of three.
NOTE: Includes all gaskets required when replacing the cylinder
head.
Order #
Price
Description / Application
$25.50
Valve Grind Gasket Set
Fits: 9N, 2N, 8N
Replaces: 7HA6521, 8BA6571 8N6051A,
9N9448, 9N6022
FDS453
$2.65
Valve Cover Gasket only
Fits: 9N, 2N, 8N (1939-52)
Replaces: 7HA6521
NOTE: 2 used per tractor;
Sold individually.
FDS425
$65.55
Valve Grind Gasket Set
Fits: NAA, Jubilee, 501, 600, 700 series
(1953-57) (All w/ 134" gas engine &
7/16" head bolts)
USA made
FDS430
$69.95
ABC2825
$39.95
Valve Grind Gasket Set
Fits: 800, 900 series, 1801, 4000 series
4-cyl. gas (thru 1964) (All w/ 172, 192"
gas engine w/ 7/16" or 1/2" head bolts)
NEW! Valve Grind Gasket Set
Fits: Super Dexta (April 1962 & up
w/ A3-152 diesel), Replaces: 960E6051
FDS455
FDS1997
FDS1766
$13.25
$6.95
$4.95
Valve Cover Gasket only
Fits: NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000, 4000 series 4-cylinder
(1953-64) (All w/ 134, 172, 192" gas
engine), Replaces: EAF6584C
Valve Cover Gasket fits: 2000 3-cyl.,
2600, 2610, 3000, 3600, 3610, 4000 3-cyl.,
4600, 4610; Industrials: 230A, 340,
3400, 3500, 3550, 420, 4400, 4500, 515,
etc. gas, LP, diesel (All 3-cyl. 1965 up
to 5/31/87), Replaces: C7NN6584B,
81817048
Crankshafts, parts / camshaft parts
NOTE: Bearings not included.
Order #
Price
FDS207
$585.00
FDS231
$585.00
ABC2058
$4.95
FDS2412
$24.95
ABC1998
$7.95
Valve Cover Stud Grommets
Fits the following gas, LP, diesel: NAA
thru 4000 4-cyl. (1953-64)
Replaces: EAF6570A 2 NOTE: 2 used
per tractor; Sold in pairs.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
Crankshaft
Fits: 1710
Replaces: SBA115256261
Crankshaft
Fits: 1910
Replaces: SBA115256471
Front Crankshaft Oil Seal
Fits: NAA - 4000 4-cyl., 6000 series
Replaces: C0NN6700A
(2.571" O.D., 1.875" I.D., 0.312" wide)
11-piece Improved Rear Crankshaft Seal
Kit fits: NAA - 4000 4-cyl., 6000 series
Replaces: C0NN6701A, EBU6701A,
84186689, B3NN6336A, C0NN6336A
NOTE: Rubber.
Front Crankshaft Oil Seal
Fits: 2000 3-cyl., thru TW35 gas, LP, diesel
(1965 & up), Replaces: C5NN6700A,
D5NN6700A, 87802755
(3.268" O.D., 2.362" I.D., 0.433" wide)
NOTE: See website for full applications.
Crankshafts, parts & camshaft parts continue on next page
141
Engine parts
Push Rod fits: Jubilee, NAA, 501, 600,
601, 700, 701, 800, 801, 900, 901, 1801,
2000 4-cyl., 4000 4-cyl. (1953-64), 6000
gas, LP, diesel, Replaces: EAA6565C,
EBP6565B, C0AE6565C, 500356
(9.61" o/a length, 5/16" O.D.)
USA made NOTE: Sold individually.
If replacing 1/4" O.D. push rod,
customer must also order #87801302
rocker adjusting screw (not available
from STP, Inc.). See website for full
applications.
Ford
$9.95
Valve grind gaskets
FDS036VGK
Description / Application
FDS2394
Crankshafts, parts / camshaft parts cont...
Crankshafts, parts / camshaft parts cont...
NOTE: Bearings not included.
Order #
Price
FDS2038
$39.95
FDS2036
$69.95
$49.95
Engine parts
Ford
FDS2042
FDS2040
$52.50
Description / Application
Order #
Price
ABC021
$39.95
Description / Application
Crankshaft Pulley
Fits: 9N, 2N, 8N, Replaces: 192160
NOTE: Includes (4) 1/4" - 28 threaded
holes for hub when used w/ front
mounted loader. For drive hub order
ABC1809.
Crankshaft Gear
Fits: 9N, 2N, 8N
Replaces: 48-6306, 486306A, 48-6306A
USA made
NOTE: 22 teeth.
Camshaft Gear (standard)
Fits: 9N, 2N, 8N (All w/ 4 bolt style
aluminum cam gear)
Replaces: 91A6256A, 7RA6256A
USA made
NOTE: Aluminum finish. 44 teeth.
Timing gear cover gaskets - USA made
Order #
Crankshaft Gear
Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl.,
4000 4-cyl. series gas, diesel (1953-64)
Replaces: EAF6306B, 500223
USA made
NOTE: 21 teeth.
Camshaft Gear (standard)
Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl.,
4000 4-cyl. series gas, diesel (1953-64)
Replaces: EAF6256M
USA made
NOTE: 42 teeth.
Price
FDS2431
$1.95
FDS2435
$2.50
FDS2440
$2.45
Application
Fits: 9N, 2N, (8N up to SN: 263843)
(1939 - early 1950) (All w/ front mount
distributor)
Replaces: 9N6020A
Fits: 8N SN: 263844 & up (Late 1950 - 52)
(All w/ side mount distributor)
Replaces: 8N6020C
Fits: Jubilee thru 4000 4-cyl. gas, LP, diesel
(1953 - 64)
Replaces: EAF6020B, F2NN6020AA, 500046
Crankshaft bearings
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order #
Price
Description
Replacement number(s)
The following fit 2N, 8N, 9N w/ 120" flathead
FDS2500
$9.30
Standard Connecting Rod Bearing (For standard 2.095" rod journal)
9N6211, 9N6211A
FDS2502
$9.30
Connecting Rod Bearing (For 0.010" (2.085") undersize rod journal)
9N6211E
FDS2504
$9.30
Connecting Rod Bearing (For 0.020" (2.075") undersize rod journal)
9N6211G
FDS2506
$9.30
Connecting Rod Bearing (For 0.030" (2.065") undersize rod journal)
A0NN6211A
FDS2790
$45.00
NEW! Main Bearing Set (For standard 2.249" main journal size)
9N6331A, 9N6333A
FDS2792
$45.00
NEW! Main Bearing Set (For 0.010" (2.239") undersize main journal)
9N6331E, 9N6333E
FDS2794
$45.00
NEW! Main Bearing Set (For 0.020" (2.229") undersize main journal)
9N6331G, 9N6333G
FDS2796
$45.00
NEW! Main Bearing Set (For 0.030" (2.219") undersize main journal)
A0NN6331A,
A0NN6333A
FDS2798
$45.00
NEW! Main Bearing Set (For 0.040" (2.209") undersize main journal)
The following fit NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967)
FDS2508
$9.30
Standard Connecting Rod Bearing (For standard 2.298" rod journal)
312026
FDS2510
$9.30
Connecting Rod Bearing (For 0.010" (2.288") undersize rod journal)
312103, EAG6211D
FDS2512
$9.30
Connecting Rod Bearing (For 0.020" (2.278") undersize rod journal)
312104, EAG6211E
FDS2514
$10.95
Connecting Rod Bearing (For 0.030" (2.268") undersize rod journal)
C0NN6211B
142
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Crankshaft bearings cont...
NOTE: Measure bearings before ordering, no returns if package has been opened.
Rod bearings are priced and sold per journal (2 halves) unless noted otherwise.
Main bearings sold as engine set. See website for additional applications.
Order #
Price
Description
Replacement number(s)
The following fit Jubilee thru 4000 4-cyl. w/ 134", 144", 172", 192" 4-cyl. gas, LP, diesel engines thru 1964
FDS2800
$49.95
NEW! Main Bearing Set (For 2.498" standard main journal)
EAFF6331A,
EAF6342C
FDS2802
$49.95
NEW! Main Bearing Set (For 0.010" (2.488") undersize main journal)
EAF6331D, EAF6342F,
EAF6342E
FDS2804
$49.95
NEW! Main Bearing Set (For 0.020" (2.478") undersize main journal) USA made
EAF6331E, EAF6342G
FDS2806
$49.95
NEW! Main Bearing Set (For 0.030" (2.468") undersize main journal)
C0NN6331E,
C0NN6342C
FDS2808
$49.95
NEW! Main Bearing Set (For 0.040" (2.458") undersize main journal)
C0NN6331F,
C0NN6342D
$14.95
NEW! Standard Connecting Rod Bearings 3-cyl. set
(For standard 2.249" rod journal)
957E6211A, 87554578
ABC2890
$12.95
NEW! Connecting Rod Bearings 3-cyl. set (For 0.010" (2.239") undersize rod journal)
957E6211G, 87554579
ABC2892
$13.75
NEW! Connecting Rod Bearings 3-cyl. set (For 0.020" (2.229") undersize rod journal)
957E6211H, 87554580
ABC2894
$12.50
NEW! Connecting Rod Bearings 3-cyl. set (For 0.030" (2.219") undersize rod journal)
957E6211J, 87554581
The following fit Dexta, Super Dexta
NOTE: Priced & sold as a set for engine. Thrust washer not included.
ABC2898
$19.95
NEW! Main Bearing Set 3-cyl. (For standard 2.749" main journal)
NOTE: Thrust washer not included.
957E6331L,
957E6333L,
957E6341L, 957E6342L
ABC2900
$19.95
NEW! Main Bearing Set 3-cyl. (For 0.010" (2.739") main journal)
81804157, 251372F
ABC2902
$19.95
NEW! Main Bearing Set 3-cyl. (For 0.020" (2.729") main journal)
957E6331N, 957E6333N,
957E6341N, 657E6342N
ABC2904
$19.95
NEW! Main Bearing Set 3-cyl. (For 0.030" (2.719") main journal)
The following fit Fordson Dexta, Fordson Super Dexta w/ 144", 152", 165", 203" Perkins gas, diesel
ABC2811
$7.95
NEW! 4-piece Thrust Washer Set (Standard (0.122") thick)
81717707, 81717711
ABC2813
$9.95
NEW! 4-piece Thrust Washer Set (Oversize (0.129") thick)
81717708
The following fit 2000 3-cyl. thru 4610, 230A thru 4500 Industrial w/ 158", 175", 192", 201" gas, diesel (1965 & up)
NOTE: See website for all applications.
FDS2810
$18.50
NEW! Connecting Rod Bearing Set (3-cyl.) (For (2.750") standard rod journal)
DFPN6211B, 83906781
FDS2812
$19.95
NEW! Connecting Rod Bearing Set (3-cyl.) (For 0.010" (2.740") undersize rod journal)
DFPN6211D, 83906783
FDS2814
$22.50
NEW! Connecting Rod Bearing Set (3-cyl.) (For 0.020" (2.730") undersize rod journal)
DFPN6211E, 83906784
FDS2822
$59.95
NEW! Main Bearing Set (For (3.372") standard main journal size)
FDS2824
$59.95
NEW! Main Bearing Set (For 0.010" (3.362") undersize main journal)
CFPN6333D, 87554565
FDS2826
$59.95
NEW! Main Bearing Set (For 0.020" (3.352") undersize main journal)
CFPN6333E, 87790359
The following fit 7810 thru TW10 w/ 401" diesel
NOTE: See website for additional applications.
FDS2816
$37.00
NEW! Standard Connecting Rod Bearing Set (6-cyl.) (For (2.750") standard rod
journal)
DFPN6211B, 83906781
FDS2818
$39.90
NEW! Connecting Rod Bearing Set (6-cyl.) (For 0.010" (2.740") undersize rod journal)
DFPN6211D, 83906783
FDS2820
$45.00
NEW! Connecting Rod Bearing Set (6-cyl.) (For 0.020" (2.730") undersize rod journal)
DFPN6211E, 83906784
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
143
Engine parts
ABC2888
Ford
The following fit Dexta, Super Dexta w/ Perkins 3-cyl. 144", 152" gas, diesel
NOTE: See website for additional applications.
Oil pump parts, repair kits
Order #
Price
FDS366
$18.75
Oil Pump Relief Valve Plunger
Fits: 9N, 2N, 8N
Replaces: 01A6663
NOTE: Helps to restore oil pressure.
FDS364
$2.95
Oil Pump Relief Valve Spring
Fits: 9N, 2N, 8N
Replaces: 9N6654
NOTE: Helps to restore oil pressure.
$59.60
Ford
FDS384
Engine parts
FDS381
FDS481
$60.50
Oil fill / breather caps cont...
Description / Application
Oil Pump Repair Kit
(For 9/16" wide oil pump gears)
Fits: 9N, 2N, (8N up to SN: 247570) & Oil
pump housing 9N6603
Replaces: APN6600A, 9N6608A
USA made NOTE: FDS384 contains (2)
9/16" wide gears, main drive gear w/ shaft,
bushing & gasket. Check gear width
before ordering. Bushing must be sized
to fit.
Oil Pump Repair Kit
(For .725" thick oil pump gears)
Fits: 8N SN: 247571 & up & Oil pump
housing 8N6603, Replaces: APN6600B,
8N6608 USA made NOTE: FDS381
contains (2) .725" thick gears, main drive
gear w/ shaft, bushing & gasket. Check
gear width before ordering. Bushing must
be sized to fit.
Order #
Price
ABC043
$13.50
ABC044
$4.95
FDS374
$7.40
FDS2437
$1.25
FDS1392
$7.20
Price
Price
$28.75
Oil Fill Cap w/ Gasket fits: 501 thru 4000
4-cyl. diesel (1958-64); 2000 thru 7500 gas,
LP, diesel (1965 & up), Replaces: 310945,
C5NE6766C, DONN6766A, 81823295
(2.325" O.D., 2.240" I.D., 2.005" tab to tab,
.450" tab width)
NOTE: White zinc finish.
1-Piece Oil Fill / Breather Cap
Fits: 9N, 2N, 8N w/ front mounted
distributor (1939-50)
Replaces: 9N6766
NOTE: Like original
$32.50
1-Piece Oil Fill / Breather Cap w/ Clip
& Copper Filter Element
Fits: Late 8N w/ side mounted distributor
Replaces: 8N6766B
(1-1/2" tall) USA made
NOTE: Exact of original. E-coated black.
"Oil" stamped into top. Fits over 1-1/2"
pipe.
ABC042
$12.95
Oil Fill / Breather Cap w/ Clip & Filter
Element fits: All Ford models thru 1964
Replaces: 8N6766B
(1-1/2" tall)
NOTE: Economy style.
Description / Application
$22.95
ABC292
$1.00
Gasket only fits: 9N, 2N, 8N, NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 4000
4-cyl. series (1939-1964)
Replaces: 8N6734
ABC1955
$1.75
Drain Plug Gasket / Washer
Fits: 2000 3-cyl. - TW35, etc. (1970 & up
using 3/4" I.D. drain plug)
Replaces: C9NN6734A, 81822148
(0.750" I.D., 0.058" thick, 0.973" O.D.)
NOTE: Made of nylon.
ABC539
$7.95
Oil Pan Drain Plug fits: 2000 3-cyl. - 5200
(1965-69) using 7/8" drain plug
Replaces: C5NE6730B
(7/8" x 18 NF)
USA made NOTE: White zinc finish.
Measure before ordering.
Description / Application
JDS500
144
Valve Cover Vent Breather Gasket
Fits: NAA thru 4000 4-cyl. gas, diesel
(1953 - 64), Replaces: EAF6863C, 500499
(2-3/4" O.D.) USA made
FDS246
Oil fill / breather caps
Order #
Valve Cover Vent Breather Element
Fits: NAA, Jubilee, 541, 600, 700, 800, 900,
1801, 2000 4-cyl., 4000 4-cyl. series gas,
diesel (1953-64)
Replaces: EAF6866A
Oil pan parts
Order #
FDS257
Oil Fill / Breather Cap w/ Replaceable
Filter Element fits: Late 8N, NAA, Jubilee,
541, 600, 700, 800, 900, 1801, 2000 4-cyl.,
4000 4-cyl. series gas, diesel (1950-64)
Replaces: 310030 (cap), 8N6782A (filter
element)
Filter Element only
(For ABC043 Cap)
$48.50
Oil Pump Pickup Tube w/ Plate
Fits: 9N, 2N, 8N
Replaces: 86604201, 8N6615, 9N6615
Description / Application
Oil Pan Drain Plug Screen w/ Gasket
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. series
(1939-1964), Replaces: 9N6730WG (plug
screen) & 8N6734 (gasket)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Oil pan parts cont...
Order #
ABC540
Price
$2.95
Oil filters cont...
Description / Application
Washer / Gasket (For ABC539)
Replaces: EBU6734A
USA made
NOTE: Copper.
$18.95
FDS432
$8.95
Oil Pan Gasket fits: NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 series 4-cyl.
(1953-64) (All w/ 134, 172, 192" gas, diesel
engine), Replaces: EAF6710B
ABC2823
$12.95
NEW! Oil Pan Gasket
Fits: Dexta, Super Dexta w/ Perkins 3-cyl.
144", 152" gas, diesel
Replaces: 296225A1
FDS2001
$8.95
Order #
Price
ABC049
$9.10
Fits: 9N, 2N, 8N, Replaces: B2NN6750A
ABC050
$9.25
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000 4-cyl., 4000 4-cyl. series gas
(1953-64), Replaces: C0NN6750B
Application
Oil filters
Price
Application
Cartridge Type
ABC045
ABC047
ABC149
$11.95
$14.85
ABC007
$9.85
Fits: 9N, 2N, 8N
Replaces: APN6731B
(4.064" tall, 3.727" wide)
USA made
Fits: NAA, Jubilee, 501, 600, 800 series
(1953-59), Replaces: CPN6731B
(4-3/4" tall, 3-15/16" wide)
USA made NOTE: For tractors which have
not been converted to spin-on type.
$7.40
Fits: 501, 600, 800, 900, 1801, 2000, 3000,
4000 series, 5000, 6000, 7000 thru 7710
Replaces: C7NN6714A, C9NN6714A
(5-1/4" tall, 3.675" O.D.) USA made
Flywheel ring gear
Fits: All Ford models (1939-64) except
Fordson Major, Dexta gas, diesel
Replaces: 9N6384
Description
Order # Price
Flywheel Ring Gear.............................................ABC070................$33.75
Economy muffler clamps
USA made
Order #
Price
ABC568
$2.95
Dimension
(1-1/2" clamp) NOTE: Use w/ FDS319
exhaust pipe.
ABC570
$2.95
(1-5/8" clamp) NOTE: Use w/ FDS121
muffler - 1 end only, FDS124 exhaust pipe.
ABC572
$2.95
(1-3/4" clamp) NOTE: Use w/ FDS121
muffler - 1 end only, FDS449, FDS450
exhaust pipes.
ABC574
$3.25
(1-7/8" clamp) NOTE: Use w/ FDS398
muffler - 1 end only.
ABC576
$3.25
(2" clamp) NOTE: Use w/ FDS398 - 1 end
only, FDS402, FDS404 mufflers.
ABC578
$3.25
(2-1/4" clamp)
ABC580
$3.25
(2-1/2" clamp)
ABC583
$4.95
(2-3/4" clamp)
ABC585
$4.95
(3" clamp)
ABC2234
$4.95
(3-1/2" clamp)
ABC1771
$7.95
(4" clamp)
Muffler clamps, bracket
Order #
Price
Description / Application
FDS116
$12.50
Muffler Clamp Kit fits: 9N, 2N, 8N gas
(1939-52), Replaces: CAPN5200A
NOTE: Includes: (2) cast iron clamps, nuts,
bolts & lock washers.
ABC360
$9.95
Muffler Clamp fits: NAA, Jubilee, 501, 600,
700, Early 800, 900 series (1953-57)
Replaces: NAA5270A (1-3/4". Fits pipe O.D.
of 1.725" - 1.825" range) USA made
Fits: Dexta & Super Dexta diesel 957E, 960E
Replaces: EPN6731B
(4-7/16" tall, 2-3/4" wide)
Muffler clamps, bracket continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
145
Engine parts
Oil Pan Gasket fits: 2000 3-cyl., 2600, 2610,
2810, 2910, 3000, 3600, 3610, 4000 3-cyl.,
4600, 4610; Industrials 230A - 555B, 3400,
4400, 4500 (All 3-cyl. gas, LP, diesel) (1965 &
up), Replaces: F0NN6710AA, 83990594
Application
Spin-On Type
7-Piece Oil Pan Gasket Set
Fits: 9N, 2N, 8N w/ 120" engine
Replaces: 9N6781
Engine oil level / dipsticks
Order #
Price
Ford
FDS429
Order #
Muffler clamps, bracket cont...
Order #
Price
ABC327
$9.95
FDS463
$21.25
Mufflers - USA made cont...
Description / Application
Chrome Muffler Clamp
Fits: Same as FDS398
(Fits pipe O.D. of 1.850" - 2.000" range)
NOTE: Original style.
Order #
Price
FDS402
$57.50
Rear Muffler Bracket
Fits: 9N, 2N, 8N w/ horizontal muffler
Replaces: 9N5260
(1-3/4") NOTE: Will fit FDS122 muffler.
Engine parts
Ford
NEW! 2" Stainless Steel Muffler Clamp
Fits: Ford models
FDS404
$34.95
NEW! 2" Painted Steel Clamp
Fits: Same as ABC2519 & ABC327
(2")
Price
FDS122
$28.75
Application
FDS399
Fits: 9N, 2N, 8N gas (1939-52)
Replaces: 8N5230
$15.95
FDS122 (Horizontal exhaust system) dimensions:
MUFFLER - Inlet length: 2-1/2", Inlet I.D.: 1-1/2",
Shell length: 23, Shell diameter: 3-1/4", Outlet
length = 8-1/2", Outlet O.D.: 1-1/2", Overall
length: 34"; EXHAUST PIPE - Flared inlet,
Vertical length: 15-1/2", Horizontal length: 22",
Outlet O.D. = 1-1/2". Welded 1-piece assembly muffler & exhaust pipe.If clamp is needed order
FDS116.
FDS121
FDS398
$20.20
Fits: Some NAA, Jubilee, 501, 600, 601, 700,
701, 800, 900, 2000 4-cyl. gas (All w/ 1-5/8"
inlet I.D.), Replaces: NAA5230E
Muffler Adaptor fits: 2000, 3000, 3400, 3500,
4000, 4400, 4500, 5000 gas, diesel 3-cyl. &
4-cyl. (1965 & up), Replaces: C3NN5255B
FDS399 dimensions: Inlet length: 1-1/2", Inlet
I.D.: 1-7/8", Shell length: 11-1/4", Outlet length:
2-3/4", Outlet O.D.: 1-7/8", Overall length: 15-1/2"
Raincaps
Order #
Price
Fits the following pipe O.D.:
RCS002
$9.65
FDS121 dimensions: Inlet length: 2-1/4", Inlet
I.D.: 1-5/8", Shell length: 13", Shell diameter:
3-1/4", Outlet length: 2-1/4", Outlet O.D.: 1-5/8",
Overall length: 17-1/2". Use w/ FDS020 elbow &
ABC360 or ABC572 clamps.
(1-1/4" - 1-7/16" I.D.)
RCS003
$9.80
(1-1/2" - 1-11/16" I.D.)
RCS004
$9.95
(1-3/4" - 1-15/16" I.D.)
RCS005
$10.35
(2" - 2-3/16" I.D.)
RCS006
$10.75
$27.95 Fits: Some 501, 601, 701, 801, 901, 1801, 2000,
(2-1/4" - 2-7/16" I.D.)
RCS007
$10.95
(2-1/2" - 2-11/16" I.D.)
RCS009
$13.35
(3" - 3-3/16" I.D.)
RCS014
$34.80
(2-1/2" I.D.) USA made
NOTE: Chrome plated.
RCS015
$41.95
(3" I.D.) USA made
NOTE: Chrome plated.
RCS016
$45.95
(3-1/2" I.D.) USA made
NOTE: Chrome plated.
4000 4-cyl. gas, diesel (1958-64) (All w/ 2"
inlet I.D.), Replaces: 310079
FDS398 (Horizontal round body) dimensions:
Inlet length: 2", Inlet I.D.: 2", Shell length: 131/2", Shell diameter: 3-1/2", Outlet length: 1-1/2",
Outlet O.D.: 1-7/8", Overall length: 18", Use w/
FDS021 elbow (gas). If clamps are needed order
ABC574, ABC576 or ABC327 clamps.
146
Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000,
4400, 4500, 4600 & 5000 gas, diesel 3-cyl.
& 4-cyl. (1965 & up) (All w/ purchase of
FDS399 Muffler Adaptor if not equipped
w/ an existing adaptor), Replaces:
C7NN5230AB, C7NN5230AC, C7NN5230Z
FDS404 (Vertical round body) dimensions: Inlet
length: 4-1/2", Inlet I.D.: 1-7/8", Shell length:
17", Shell diameter: 5-1/2", Outlet length: 7-1/2",
Outlet O.D.: 2", Overall length: 29", If raincap is
needed order RCS005. If clamp is needed order
ABC576.
Mufflers - USA made
Order #
Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500,
5000 gas, diesel 3-cyl. & 4-cyl. (1965-75) (All
w/ purchase of FDS399 Muffler Adaptor if
not equipped w/ an existing adaptor)
Replaces: C5NN5230AR
FDS402 (Vertical oval body) dimensions: Inlet
length: 5", Inlet I.D.: 1-7/8", Shell length: 10-3/4",
Shell diameter: 4" x 8", Outlet length: 13-1/4",
Outlet O.D.: 2", Overall length: 29", If raincap is
needed order RCS005. If clamp is needed order
ABC576.
ABC2519 $14.95
ABC2625 $8.50
Application
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Muffler heat shield
Fits: NAA thru 4000 4-cyl. gas, diesel
(1953-64), Replaces: NCA5290A
(25-3/4" long)
Description
Order # Choke parts cont...
Order #
Price
Choke Knob fits: 9N, 2N, 8N, NAA,
Jubilee, 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cyl. series (1939-64)
Replaces: 9N9703 (10 - 32 thread)
NOTE: Aluminum.
JDS718
$18.75
Metal Sheathed Choke Cable
Fits: Tractors, Forklift & other
applications using 47" or less cable
NOTE: Metal sheathed w/ "CHOKE" on
knob. Cut to length.
ABC423
$9.95
Universal Choke Cable
Fits: Tractors, Forklift & other
applications using 72" or less cable
NOTE: Metal sheathed. Cut to length.
Can also be used as a 'Stop' cable for
diesel engines.
Price
Exhaust pipes - USA made
FDS319
Price
$23.50
Description / Application
Exhaust Pipe fits: NAA, Jubilee,
501, 600, 601, 700, 701, 800, 900 w/
172" gas, 2000 series w/ 134" gas,
4 & 5 speed transmissions & SelectO-Speed (1953-64) (All 4-cyl.)
Replaces: NCA5255B
NOTE: Use w/ FDS124 tail pipe &
FDS121 muffler.
FDS319 Dimensions: Length: 35",
Inlet I.D.: 1-1/2"
FDS124
$23.10
Carburetors, parts
Can't find your carburetor number? Look on page 321.
Carburetors are limited to replacement only - NO refunds.
No replacement will be given if dirt, rust, etc. is found in the
carburetor or if it has been taken apart.
Order #
Price
FDS018
$156.70
FDS1178
$282.50
FDS1183
$282.50
FDS1195
$282.50
ABC297
$7.50
FDS124 Dimensions: 1-1/2" Inlet I.D.,
54" length, 1-1/2" Outlet I.D.
FDS450
$21.10
Exhaust Pipe
Fits: 801, 1801, 4000 4-cyl. gas (1958-64)
Replaces: 311051 NOTE: Use w/ FDS449
horizontal tail pipe & FDS398 muffler.
FDS450 Dimensions: 1-3/4" Inlet I.D.,
24" Vertical length, 29" Horizontal length
FDS449
$22.65
Horizontal Tail Pipe
Fits: 801, 1801, 4000 4-cyl. gas
(1958-64) (All w/ 4 or 5 speed
transmission), Replaces: 311050
NOTE: Use w/ FDS450 exhaust
pipe & FDS398 muffler.
FDS449 Dimensions: 1-3/4" Inlet I.D.,
60" length, 1-3/4" Outlet I.D.
Choke parts
Order #
FDS266
Price
$22.95
Description / Application
Choke Control Rod Assembly
w/out Knob fits: 9N, 2N
Replaces: 9N9700
(29 1/2" length)
NOTE: Pre-bent.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
Carburetor (NEW, not Rebuilt)
Fits: 9N, 2N, 8N
Replaces: Marvel Schebler TSX 33, 241A,
B, C NOTE: Only fits flathead engines.
Will not fit overhead valve engines.
Carburetor (NEW, not Rebuilt)
Fits: NAA, Jubilee
Replaces: EAE9510A, EAE9510C,
B2NN9510A, Marvel Schebler TSX 428
Carburetor (NEW, not Rebuilt)
Fits: 600, 700 (up to 1957) w/ 134" engine,
Marvel Schebler TSX 580
Replaces: EAE9510D, B4NN9510A
Carburetor (NEW, not Rebuilt)
Fits: 501, 601, 701, 2000 4-cyl. (1958-64)
w/ 134" engine
Replaces: 310746, 312954, B8NN9510A,
Marvel Schebler TSX 692, 765
Carburetor Fuel Inlet Elbow & Strainer
Assy. fits: 9N, 2N, 8N, NAA, NAB,
Jubilee, Golden Jubilee gas (1939-54)
Replaces: 9N9553 (Male end (Screen
end) - 1/8" pipe thread; female end - 1/4"
flare) NOTE: Must have internal threads.
Used w/ flair fitting; NOT compression
fitting.
Carburetors, parts continue on next page
147
Engine parts
Horizontal Tail Pipe fits: NAA,
Jubilee, 501, 600, 601, 700, 701, 2000
series w/ 134" gas, 800 w/ 172"
gas (1953-64) (All w/ 4 or 5 speed
transmission)
Replaces: NCA5263B
NOTE: Use w/ FDS319 exhaust
pipe & FDS121 muffler.
Ford
$4.95
Muffler Heat Shield.............................................FDS2446........... $39.50
Order #
Description / Application
FDS262
Carburetors, parts cont...
Order #
ABC230
Engine parts
Ford
ABC133
Price
$6.45
$6.15
FDS1353
$37.15
ABC513
$2.50
ABC1152
ABC1156
ABC557
$13.95
$23.95
$29.95
ABC564
$26.40
ABC562
$26.40
148
Carburetors, parts cont...
Description / Application
Order #
VITON Needle Float Valve (For Marvel
Schebler carburetors) fits: 9N, 2N, 8N,
NAA, Jubilee, 600, 700 series (1939-57)
(All w/ TSX 33, 38, 83, 241A, B, C, 420,
428, 500, 534, 551, 580, 593) (134" engines)
Replaces: C3NN9564A, 233-536
(.080 orifice) USA made
NOTE: Viton needle & seat helps stop
carb flooding.
ABC1159
$5.00
Throttle Disc (For Marvel Schebler
carburetor) fits: 9N, 2N, 8N, NAA, 600,
700 w/ TSX 33, 241B, 428, 500, 580
Replaces: 9N9585, 14-175
(15°, 1.105" O.D.) USA made
ABC1182
$18.50
Choke Disc (For Marvel Schebler
carburetor) fits: 9N, 2N, 8N, NAA, 600,
700 (All w/TSX 33, 241A, B, C, 420, 428,
500, 580), Replaces: 9N9549, 27-530,
27-539 (1-5/16" O.D.) USA made
ABC1171
$35.70
Choke Disc (For Marvel Schebler
carburetor) fits: 501, 601, 701 (1958-62),
800, 900 (1955-57), 2000 4-cyl. (All w/ TSX
534, 551, 577, 593, 692, 706, 771)
Replaces: EAF9549B, 312952, 27-573
(1-3/8" O.D.) USA made
ABC1167
$13.25
Venturi (For Marvel Schebler carburetor)
Fits: 9N, 2N, 8N (All w/ TSX 33, 38,
83, 241A, B, C, 420), Replaces: 9N9586,
C5NN9586B, 46-467 (11/16" dia. throat)
NOTE: Plastic.
VITON Needle Float Valve (For Marvel
Schebler carburetors) fits: Some 601, 701
both w/ TSX 692, 765; 800, 900, 2000, 4000
4-cyl. series TSX 662, 706, 769, 771, 813,
977 (1954-64), Replaces: C3NN9D532A
(0.100" orifice) USA made
NOTE: VITON needle & seat helps stop
carburetor flooding.
Price
Throttle Shaft (For Holley carburetors)
Fits: 2000 3-cyl. thru 555B (1965 & up)
Replaces: C5NE9581A
Throttle Body Repair Bushing (For small
bowl Marvel Schebler carburetors)
Fits: 9N thru (Early 900 w/ TSX 593, 706)
(.383" O.D., .247" I.D., .501" long)
USA made NOTE: Repairs worn throttle
body using 1/4" throttle shafts. Must
ream to size.
Main Nozzle (For Marvel Schebler
carburetor) fits: 9N, 2N, 8N w/ TSX 33,
38, 83, 241A,B & C, 420
Replaces: 9N9530, 47-180
Main Nozzle (For Marvel Schebler
carburetor) fits: NAA, 600, 700 w/ TSX
428, 500, 577, 580
Replaces: 312949, EAE9530A, 47-270
Main Carburetor Nozzle (For Zenith
carburetors) fits: 9N, 2N, 8N (All w/ carb
10850, 11850)
Replaces: C66-47-50 USA made
Main Jet Adjustment Needle Assy.
(For Zenith carburetor) fits: Some NAA,
Jubilee, 600 series w/ carb 13876
(3/8" x 24" thread) USA made
Main Jet Adjustment Needle Assy.
(For Marvel Schebler carburetor)
Fits: 801, 901, 1801, 4000 (4-cyl.) (1958-64)
w/ TSX 662, 769, 774, 813
Replaces: 311605, C3NN9G504A, 43-722
Description / Application
Carburetor gaskets
Order #
Price
Description / Application
ABC408
$1.39
Manifold to Carburetor Gasket
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700 (1939-57) w/ TSX 33, 38, 83, 241A,B,C,
420, 428, 500, 580, Replaces: 9N9447
(2-3/8" - 2-7/16" slotted bolt holes,
1-3/16" center hole) USA made
ABC410
$1.39
Manifold to Carburetor Gasket
Fits: Ford models
(2-15/16" c.c. bolt holes, 1-3/4" center
hole) USA made
ABC416
$1.50
Manifold to Carburetor Gasket fits: 601,
701, some 800, some 900, 2000 4-cyl. (thru
1964) (All w/ TSX 551, 577, 593, 692, 706,
765, 771); 134" (1958-64), 172" (1954-57),
Replaces: EAF9447B (2-3/4" c.c. bolt
holes, 1-5/16" center hole) USA made
ABC424
$1.39
Manifold to Carburetor Gasket
Fits: 801, 901, 4000 4-cyl. series (1958-64)
w/ TSX 662, 769, 813, 966, 970, 972, 973,
977, 988, 989, Replaces: C5NE9447A
(2-3/4" c.c. bolt holes, 1-1/2" center hole)
NOTE: Import. Perforated steel core.
ABC2275
$3.95
Carburetor Gasket Kit (For Big Bowl
Marvel Scheblers) fits: Some 800 thru
4000 4-cyl. series, Replaces: EAE9502
USA made NOTE: Fits same carb
numbers as FDS212 economy kit.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Carburetor repair kits cont...
Carburetor floats
Order #
Price
Application
ABC036
$11.95
(For small bowl Marvel Schebler
carburetors) fits: 9N, 2N, 8N, NAA, Jubilee,
501, 600, 700 w/ 134" gas engine (1953-57);
Early 800, 900 4-cyl. series w/ 172" gas
engine (All w/ TSX 33, 241A, B, C, 428, 500,
551, 580, 593, 692, 706, 765); Power Units
w/ TSX 38, 83, 420, 534, 577, 771, 971, 976,
987, 996, Replaces: 9N9550A
$19.95
(For Marvel Schebler carburetors)
Fits: 800 w/ TSX; 801, 901, 1801 series, 4000
(1958-64) (All w/ TSX 662, 769, 813, 977);
Power Units w/ TSX 966, 972, 973, 988, 989,
993, 994, 997, 998, Replaces: 311608
ABC190
$15.75
(For Zenith carburetors)
Fits: 9N, 2N, 8N, NAA, 600, 700, 800 & 900
(All w/ carb 10850, 11850, 12492, 12493,
13876, 13878, 13879, 13880)
Replaces: C85-28
ABC452
$55.40
(For Zenith carburetors) fits: 800, 2000
3-cylinder, 3000, 4000 3-cylinder, 5000, 6000
(All w/ carb 12471, 12472, 12902, 13875,
13881, 13912, 13913, 13914, 13958, 13960,
13961); Power Units w/ carb 13915, 13916,
13917, 13920, Replaces: Zenith C85-115S
(For Holley carburetors) fits: 2000 3-cyl.
thru 6600 (1965 & up); Also fits Holley
carbs R2923-1A, R3210, R3589B, R3657,
R3658, R3658A, R4111, R4119, R4119A,
R4120, R4120- 1, R6852, R6853, R7867,
R7896, R8552, R8553, R8554
Replaces: C5NE9550A, 81810964
NOTE: See website for complete
application listing.
Economy Carburetor Repair Kit - USA made cont...
$25.70
FDS212
$21.95
ABC1344
$18.95
FDS1347
$37.50
ABC427
$39.95
Economy Carburetor Repair Kit
(For Holley carburetors) fits: 2000 3-cyl.
thru 5100 w/ Holley #R3158A, R3210,
R3589B, R3656A, R3657, R3658, R4111,
R4111-1A, 4111A, R4119, R4119-1A,
R4119A, R4120, R4120-1, LIST6852, R6852,
R6853, R6863, R7867, R7896, R8552, R8553,
R8554 NOTE: Includes repair components
for acceleration pump, piston assembly,
spring, retainer. Float valve seat not
included.
ABC1918
$34.95
Economy Carburetor Kit
(For Holley carburetors) fits: 2000 3-cyl
thru 5200 w/ Holley # LIST2923-1A,
LIST2923-2, LIST2923-3, LIST3012-2,
LIST3013-2, LIST3658-2, R2923A, R29231A, R3012-2A, R3012-3A, R3013-2, R3013-3,
R3655A, R3656. Also fits OEM carb #'s:
C5NE9510E, C5NE9510G, C5NE9510H,
C5NE9510J, C5NE9510K, C5NE9510L,
C5NE9510S, C5NN9510F, C5NN9510L,
C5NN9510M, C5NN9510N, C5NN9510R
NOTE: Includes repair components for
acceleration pump, piston assy, spring,
retainer. Float valve seat & diaphragm not
included.
Can't find your carburetor number? Look on page 321.
Economy carburetor repair kits contain: Needle & seat
(unless noted), float lever pin, seal, gaskets & instructions.
Basic carburetor repair kits contain: Throttle shaft, needle &
Complete carburetor repair kits contain: Choke & throttle
shafts, needle & seat (unless noted), float lever pin,
miscellaneous plugs & screws, throttle shaft seals, adjustment
screw & gaskets.
Order #
Price
Description / Application
Economy Carburetor Repair Kit - USA made
ABC220
$22.50
Economy Carburetor Repair Kit
(For Zenith carburetors) fits: 9N, 2N, 8N,
NAA, Jubilee, 600, 700, 800, 900, 2000
4-cyl. (All w/ carb 9544, 10850, 11294,
11850, A, 12492, 12493, 12494, 12544, 12566,
13876, 13877, 13878, 13879, 13880)
NOTE: Fits 61, 68, 161 series Zenith carbs.
ABC1346
Carburetor repair kits
seat (unless noted), float lever pin, seal, gaskets & instructions.
Description / Application
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 9N, 2N, 8N (All w/ TSX 33, 241A, B,
C 420); NAA & Jubilee (Both w/ TSX 428);
600 & 700 w/ TSX 500, 577, 580, 692, 765;
800 w/ TSX 551, 593, 706, 771; 900 w/ TSX
551, 593, 706; 2000 4-cyl. w/ TSX 500, 577,
580, 692, 765, 976; Power Units w/ TSX: 38,
83, 420, 534, 577, 771, 971, 976, 987, 996
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 800, 900, 1801, 4000 4-cyl. series &
Power Units w/ TSX 844, 884, 966, 972,
973, 988, 989, 993, 994, 997, 998
Economy Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 800, 900 & Industrial w/TSX662, 769,
813, 966, 970, 972, 973, 977, 988, 989, 997,
998
Economy Carburetor Repair Kit
(For Zenith carburetors) fits: 2000, 2600,
3000, 3400, 3500, 3600, 4000, 4100, 4400,
4500, 4600, 5000 (All w/ 3 cyl., 1965 & up)
(All w/ 13912, 13913, 13914, 13915, 13916,
13917, 13920) (Fits 267 series Zenith carbs)
Carburetors repair kits continue on next page
149
Engine parts
ABC1352
$23.60
Price
Ford
ABC037
Order #
Governors, parts
Carburetor repair kits cont...
Can't find your carburetor number? Look on page 321.
Order #
Economy carburetor repair kits contain: Needle & seat
(unless noted), float lever pin, seal, gaskets & instructions.
Price
$1.00
ABC029
$75.95
Basic Governor Repair Kit
Fits: 9N, 2N, 8N, Replaces: BOK12502,
86979852 USA made
NOTE: Kit contains gasket, lower race
assembly, ball bearing, C-clip, shim &
5/8" governor balls
ABC030
$164.30
Complete Governor Repair Kit
Fits: 9N, 2N, 8N, Replaces: CAPN12502A
USA made NOTE: Kit contains gasket
lower race assembly, shaft assembly,
upper race assembly, ball bearing
assembly, drive shaft ball stop shim,
5/8" governor balls, bushings, dust seal
& C-clip
ABC027
$229.00
Basic carburetor repair kits contain: Throttle shaft, needle &
seat (unless noted), float lever pin, seal, gaskets & instructions.
Complete carburetor repair kits contain: Choke & throttle
shafts, needle & seat (unless noted), float lever pin,
miscellaneous plugs & screws, throttle shaft seals, adjustment
screw & gaskets.
Order #
Price
Description / Application
Engine parts
Ford
Economy Carburetor Repair Kit - USA made cont...
ABC1349
$24.95
ABC215
$58.50
Economy Carburetor Repair Kit
(For Zenith carburetors)
Fits: 800, 4000 (Both w/carb 12471, 13875);
6000 w/ carb 12902
Basic Carburetor Repair Kit
Basic Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 801, 901, 1801, 4000 series (1958-64)
w/ 172" gas engine (All w/ TSX 662, 769,
813) NOTE: NOTE: Does not include
choke shaft.
ABC031
$45.00
ABC034
$58.50
ABC212
$58.50
ABC213
$58.50
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 9N, 2N, 8N (All w/TSX 33 & 241A, B,
C)
$229.00
Governor Assembly (Complete 2 Arm)
Fits: 8N (1947-52) w/ proofmeter drive
Replaces: 8N18204B USA made
FDS248
$72.50
FDS248GK
$1.75
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 501, 601, 701 (1958-62); 2000 w/ 134"
gas engine (1952-64) (All w/ TSX 765)
FDS1278
$18.95
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: 800, 900 series w/ 172" gas engine
(1954-57) (All w/ TSX 593, 706)
Governor Compensating Spring & End
Assembly fits: NAA thru 960 (1953-58)
when using FDS489 governor; 501 thru
4140 4-cylinder gas, LP (1958-64) w/
engine SN: 26402 & up
Replaces: NCA99810A
FDS1921
$5.75
Governor Compensating Spring
Fits: NAA, Jubilee, Golden Jubilee
(1953-54), Replaces: NAA9827B
(8.250" o/a length, 0.435" O.D., 0.059"
wire dia) NOTE: Mounts between
bellcrank & underneath battery tray.
FDS1917
$5.75
Governor Compensating Spring
Fits: 501 thru 4000 4-cyl. gas, LP
Replaces: NCA9827A (6.535" o/a
length, 0.532" O.D., 0.070" wire dia)
NOTE: Mounts between bellcrank &
underneath battery tray.
Complete Carburetor Repair Kit
(For Marvel Schebler carburetors)
Fits: NAA, Jubilee (1953-54) (Both w/ TSX
428), 600, 700 (1954 - 57) w/ TSX 580
(All w/ 134" gas engine)
Fuel lift pump
Fits: 2000 3-cyl., 2600, 2610, 3000, 3600,
3610, 4000 3-cyl., 4600, 4610, 5000, 6600,
230A - 5550 gas (All 1965 & up)
Replaces: C5NE9350A, D5NN9350B,
F2NN9350AA
Description
Order # Price
Fuel Lift Pump........................................................FDS1990...........$44.95
150
Governor Housing Mounting Cover
Gasket fits: 9N, 2N, 8N
Replaces: 9N6022 USA made
Governor Assembly (Complete 3 Arm)
Fits: 9N, 2N (1939-47) w/out proofmeter
drive, Replaces: 9N18200C USA made
ABC028
Complete Carburetor Repair Kit
Description / Application
ABC290
Aluminum Governor Mount w/ Gasket
(Timing Gear Cover) fits: Late 8N SN:
263843 w/ side mounted distributor,
Replaces: 8N6017B (mount), 8N6018
(gasket) NOTE: Close out.
Gasket only (For FDS248 Governor
Mount) fits: Ford models
Replaces: 8N6018 USA made
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Radiators, parts
Order #
Price
FDS1859
$299.95
FDS1865
ABC057
$2.95
Heavy Duty Radiator
(For Pressurized System)
Fits: 9N, 2N, 8N
Replaces: 8N8005, 86551430
(25" H, 16" W)
NOTE: Does not include drain plug
or cap.
Heavy Duty Radiator
Fits: NAA, 501, 600, 700, 800, 900,
2000 4-cyl, 4000 4-cyl series (1953-64)
(All w/out oil cooler in lower tank)
Replaces: C5NN8005AB,
NCA8005B,C,D (Original style
straight fins, 24-5/8" H, 17-3/8" W)
NOTE: Does not include drain plug
or cap.
Complete Radiator
Fits the following tractors w/out
oil cooler in lower tank: 2000, 2310,
2600, 2610, 2810, 2910, 3000, 3400,
3500, 3600, 3610, 3910, 4000, 4000SU,
4100, 4400, 4500, 4600SU, 4610, 231,
335, 340, 445, 531, 540 (1965 & up)
(All 3-cyl. gas, diesel)
Replaces: C7NN8005H,
E0NN8005MD15M
Radiator Drain Plug
Fits: 9N thru TW35, Replaces: 81465471,
9N8115B, C9NN8115A
(1/4"-18 NPT) USA made
NOTE: See website for full applications.
Order #
Description / Application
$12.90
FDS343
(Chrome
Plated)
$16.25
Wing Radiator Cap (For 4 PSI Pressurized
System) fits: 9N, 2N, 8N (Will not fit Early
9N & 2N w/ ORIGINAL non-pressurized
radiator 1939 thru 12/1943)
Replaces: 9N8100, 2N8100A
NOTE: Pressurized radiators will have
filler neck with slots on the outside for the
cap; Non-pressurized radiators will have
the slots for the cap on the inside of the
radiator neck.
ABC008
(4 PSI)
$8.75
Underside view
ABC1396 $8.95
(7 PSI)
$2.95
ABC2282 $3.95
Radiator Mounting Pad
Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600,
700, 800, 900, 1801, 2000, 2310, 2600, 2610,
2810, 2910, 3000, 3600, 3610, 3910, 4000,
4100, 4600, 4610, 5000, 5600, 6600, 7000,
7600; Industrials: 1801, 3400, 3500, 4400,
4500, Replaces: B9NN8125A, C0NN8125A;
Can replace if trimmed C5NN8125A,
594762 (2" x 2", 1/4" thick)
NOTE: 2 used per tractor; Sold
individually. See website for full
application info.
Radiator to Front Support Bolt Kit
Fits: 2N thru 4000 4-cyl. (1939-64)
NOTE: Fits FDS1859, FDS1865 radiators.
Includes (2) carriage bolts, nuts, lock
washers.
Radiator Cap w/ Gasket (For Pressurized
System) (For radiators w/ 1" filler neck)
fits: 9N thru TW35, NAA thru 4000 4-cyl.
up to 1964; Serviceable for E2NN8100BA,
E5NN8100AA - 4 PSI instead of 13 PSI,
Replaces: 2N8100A, ECON8100AA
(2.330" O.D., 2.000" tang to tang,
1.500" radiator neck I.D.)
NOTE: For 1" tall filler neck
Underside view
ABC1398 $5.95
(7 PSI)
Underside view
ABC1394 $5.25
(13 PSI)
$2.35
Radiator Hood Pad
Fits: 9N, 2N, 8N
Replaces: 2N8032 USA made
ABC455
Price
FDS039
(Black)
Radiator Cap w/ Gasket
(For radiators w/ 3/4" filler neck)
Fits: 2000 3-cyl. thru TW35
ABC1398 Replaces: DOHA8100C, 81855444,
83935904
ABC1394 E5TH8100AA, E5TH8100AADS,
E2NN8100BA, 83956266, 83957211,
83935905
(2.333" O.D., 2.000" tang to tang, 1.096" tall)
NOTE: Fits radiators w/ 3/4" tall filler
neck.
Underside view
Radiator hoses, clamps
Order #
Price
ABC055
$6.05
Radiator Hose (Cylinder head to radiator
upper) fits: 9N, 2N, 8N
Replaces: 2N8260
(1-7/16" I.D. x 10" length, 1-13/16" O.D.)
ABC053
$7.95
Radiator Hose (Water pump to radiator
lower) fits: 9N, 2N, 8N up to SN: 263843,
NAA, Jubilee, 501, 600, 700, 800, 900, 1801,
2000 4-cyl. & 4000 4-cyl. series (thru 1964)
(All without power steering)
Replaces: 312588 (1-1/2" I.D.)
ABC054
$9.55
Radiator Hose (Water pump to radiator
lower) fits: 8N SN: 263844 & up w/ side
mounted distributor, Replaces: 8N8286
(1-1/2" I.D.)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
Radiator hoses, clamps continue on next page
151
Cooling parts
ABC209
$255.95
Description / Application
Ford
FDS422
$332.65
Radiator caps
Radiator hoses, clamps cont...
Order #
Price
ABC056
$4.50
FDS1367
$6.35
$8.50
ABC492
$2.70
FDS258
$3.60
Description / Application
Order #
Radiator Hose (Radiator upper)
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000 4-cyl., 4000 4-cyl. series (1953-64)
gas, diesel, Replaces: NAA8260B, 310048
(1-1/4" I.D. x 7-3/8" length)
Radiator Hose (Radiator upper)
Fits: 2000 3-cyl. thru 7700 (All diesels);
2310 - 7610 w/out air conditioning
Replaces: C5NN8260A, C5NN8260B,
D5NN82601, 81805628, 83907414
(6-7/8" end to bend, 1-1/2" I.D.)
Radiator Hose (Radiator Lower)
Fits: 2000 3-cyl. thru 7000 gas, diesel
EXCEPT 4500, 6000, 6600, 6610, 6640, 6700,
6710 & 6810; Industrials: 230A - 545A (1965
& up), Replaces: 81805637, C5NN8286B,
C5NN8286BGV (1.700" I.D.)
Clamp (For Upper Radiator Hose)
Fits: Jubilee, NAA, 501, 600, 700, 800, 900,
1801, 2000 4-cyl., 4000 4-cyl. series (1953-64)
Replaces: 8BA-8287
(For 1-5/8" O.D. hose)
Clamp (For Upper / Lower 1-3/4" to 2"
O.D. Radiator Hose) fits: 9N, 2N & 8N for
upper or lower; Fits lower radiator hose
only: Jubilee, NAA, 501, 600, 700, 800, 900,
1801 series, 2000 4-cyl., 4000 4-cyl. (thru
1964), Replaces: 60-8287
Price
FDS082
$60.05
FDS236
$65.95
FDS443
$2.85
Description / Application
Fan Shroud
Fits: 9N, 2N, 8N
Replaces: 2N8146
Fan Shroud fits: NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
series (1953-64) gas, diesel
Replaces: NCA8146A NOTE: Made to fit
original radiator; must be trimmed to fit
aftermarket radiator lower neck.
Fan Shroud Screw Kit w/ Washers
(For FDS082 & FDS236 Fan Shrouds)
(#8-32 x 3/8" size)
Fan blades
Order #
Price
FDS040
$39.95
Description / Application
Fan Blade (4 Blade)
Fits: 9N, 2N, 8N, NAA, Jubilee
Replaces: 8N8600A
FDS250
$37.50
Fan Blade (3 Blade)
Fits: 501, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl. series (1954-64) gas
Replaces: NCA8600S
Thermostats, parts
Order #
Price
ABC051
$22.80
Toward
Radiator
Cooling parts
Ford
FDS1413
Fan shrouds, parts
ABC052
Description / Application
Thermostat fits: 9N, 2N, 8N
Replaces: B2NN8575A, 9N8575
(160°, 2-1/4" long for 1-1/2" I.D. hose)
NOTE: Fits in upper radiator hose,
pointed end toward radiator.Will also
work in other applications using 1 1/2"
I.D. hose.
$11.50
Thermostat w/ Gasket
Fits: NAA thru 9600 gas, diesel
Replaces: D8NN8575AA, EAF8575BWG
(160º Lo-Temp) USA made
FDS2057
$1.45
Thermostat Housing Gasket
Fits: NAA - 4000 4-cyl. gas, diesel
Replaces: EAF8255A USA made
152
Fan belts
NOTE: Verify belt size before ordering.
Order #
Price
Description / Application
ABC058
$14.50
Fan Belt (For tractors w/ generators not
w/ alternator conversion) fits: 9N, 2N,
(8N up to SN: 263844) w/ front mounted
distributor, Replaces: 9N8620B
(Notched 11/16" x 46-1/2")
ABC059
$11.80
Fan Belt (For tractors w/ generators &
alternator conversion) fits: Late 8N w/ side
mounted distributor, NAA, Jubilee (195254), models w/ Delco 10 SI style alternator
Replaces: 8N8620 (Notched 5/8" x 40")
FDS1091
$14.00
Alternator Fan Belt fits: 9N, 2N, (8N up
to SN: 263843) (1939-51) (All w/ front
mounted distributor) (11/16" x 43")
ABC191
$10.30
Fan Belt (For generator only) fits: 501, 600,
700, 800, 900, 1801, 2000, 4000 series 4-cyl.
gas, diesel (1954-64), Replaces: EAF8577A
(33/64" x 40-3/4")
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Fan belts cont...
NOTE: Verify belt size before ordering.
Order #
Price
Description / Application
Alternator Fan Belt fits: 501, 600, 700, 800,
900, 1801, 2000 4-cyl., 4000 4-cyl. series thru
1964 (17/32" x 38-1/2")
FDS1453
$12.50
Fan Belt (For tractors w/ generators)
Fits: (2000 3-cyl. thru 4500 generators only
(1965-75)); 6610 (81 thru 3/84) (fan/alt);
8630, 8700 (alternator only thru 12/78),
8730, 8830, (9000 w/ alternator), 9700,
TW10 (alternator), TW20, TW30 (A.C. belt);
Industrial: 650, 750, 755; A62, A64 (both to
5/76 w/out air), Replaces: C5NE8620B,
D4NN10C318A, 86514618, C9NN10C318B,
D8NN10C318EA, 81845565 (1/2" x 53-1/4")
FDS1458
$12.25
Fan Belt (For tractors w/ alternators)
Fits: 2600 thru TW10, Industrials: 230A
thru 755, Replaces: D3NN10C318C,
D3NN10C318D, 9604339, 81836785,
83976999, 87800127 (17/32" x 54)
ABC1648
$15.50
Fan Belt fits: Some 540, 550, 555 (fan w/out
72 amp/ Alt); 976, 5530, 5610, 6700, 6710,
A62, Replaces: D8NN8620A, C5TE8620A
(17/32" x 45-1/4")
IHS235
$9.35
Alternator Belt fits the following w/ 72-80
AMP alternators: Some 540 diesel w/ air
conditioning, 550 w/ air conditioning; All
w/ cab & 10/1/1985 & later; 5110 5610,
6410, 6610, 7610, 7710, 7810, Replaces:
D7NN10C318A, E4NN10C318AA,
86514615 (1/2" x 30-1/4")
Price
$62.50
FDS329
$54.95
FDS053
$63.75
For 2" diameter hole.
Order #
Price
ABC016
$12.25
ABC109
$12.25
FDS407
$12.25
(30-0-30)
Fits: 9N, 2N, 8N, Golden Jubilee, Jubilee,
NAA, NAB, 600, 620, 630, 640, 650, 660, 700,
740, 800, 820, 840, 850, 860, 900, 950, 960
(gas, LP, diesel thru 1957)
Replaces: A0NN10670A (Terminal type)
ABC466
$14.95
(60-0-60)
Fits: 9N thru 4000 4-cyl.
w/ Alternator system
(Terminal type)
USA made
NOTE: Stainless steel bezel.
ABC2238
$14.95
Application
Fits: 9N, 2N, 8N
Replaces: 8N8501A
FDS054
$56.95
Fits: Jubilee, NAA (1952 - 54)
Replaces: CDPN8501B
FDS055
$66.15
Fits: 501, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl series (1954-64) gas,
diesel, Replaces: CDPN8501C
(4-3/8" o/a pulley length)
NOTE: Includes extended single-groove
pulley.
Fits: Series 2000, 3000, 4000, 5000 & 7000
(1965-75); 2600, 3600, 4100, 4600, 5600,
5700, 6600, 6700, 7600 & 7700 (197581); 2310, 2610, 2810, 2910, 3610, 3910,
4110 & 4610 (1981-2 /1990); 3230, 3400,
3430, 3500, 3930, 4130, 4500, 4630, 4830
& 5030 (3 / 1990 - present); 5110, 5610,
6610, 6710, 7610 & 7710 (1981 - 10/1988)
Replaces: DHPN8N513C, DJPN8A513C,
EAPN8A513F, EGPN8A513DA
NOTE: Includes single-groove pulley,
does not include rear housing. Pump has
5/16" & 7/16" dia. mounting holes and
replaces earlier style pump w/ 5/16" &
3/8" dia. mounting holes.
NOTE: ABC gauges vary from original appearance.
NOTE: NEW not Rebuilt; no core charge.
Price
Fits: Fordson Major, Fordson Super Major,
Fordson Power Major gas, diesel (All w/
out power steering)
Replaces: E1ADKN8501B, 82847510
Amp gauges
Water pumps
Order #
Application
Cooling parts / Gauges
$9.99
Order #
FDS2259
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Ford
FDS1108
Water pumps cont...
Description / Application
(20-0-20)
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700,
800, 900 (All Ford models thru 1958)
Replaces: FAD10850A
(Terminal type) USA made
(30-0-30)
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700,
800, 900 (All Ford models thru 1958)
Replaces: FAD10850A
(Terminal type) USA made
(60-0-60)
Fits same as ABC466
(Terminal type)
USA made
NOTE: Black bezel.
153
Warning lights
Oil pressure gauges, parts cont...
Order #
Price
Description / Application
Order #
Price
FDS1848
$41.50
Dash Panel Warning Light Set (Oil Pressure
& Generator) w/ Wires & Bulb Holders
Fits the following w/ 12-volt systems:
Dexta, Super Dexta, Replaces: E203NE9,
E204NE9 (0.550" O.D. lense, 0.822" outer
housing dia., 1.715" o/a length, 1.010"
flange mounting dia.)
NOTE: Red & green lenses.
ABC523
$23.95
FDS486
$10.15
FDS488
$10.15
ABC2360
$3.95
Oil Gauge Adapter Fitting
Fits: 2N, 9N, Replaces: 9N18685
(1/8" pipe female to 3/16" tubing female)
NOTE: Brass.
ABC2353
$3.95
Oil Gauge Adapter Fitting
Fits: 8N
Replaces: 8N18685
(1/8" pipe female to 1/4" tubing female)
ABC538
$13.40
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/8" compression)
USA made NOTE: Brass. Use w/ ABC523
line kit.
IHS626
$12.85
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/4" compression)
USA made NOTE: Brass.
$13.95
Generator / Transmission Temperature
Warning Light w/ 'PAL' nut
Fits: 501 thru 5110 (1958 & up)
Replaces: 310124, B9NN10241B, 373348S
(nut) (Flange is 0.875" O.D., 3/4" - 20 NF
thread, 0.885" tall) NOTE: See website for
full applications listing.
Ford
FDS2476
Oil pressure gauges, parts
NOTE: ABC gauges vary from original appearance.
For 2" diameter hole.
Gauges
When ordering a dash mounted oil pressure gauge you will also
need to order (1) of the oil gauge fittings depending on the line
size to adapt your existing line to the gauge: ABC538, IHS626,
ABC2353, ABC2360.
Order #
Price
FDS405
$14.95
ABC082
FDS401
ABC005
154
$18.95
$14.95
$18.95
Description / Application
(0-50 PSI)
Fits: 9N, 2N, 8N
Replaces: 9N9273A
(1/8" NPT male thread)
NOTE: Black bezel. Line adapter sold
separately.
(50 PSI)
Fits: 9N, 2N, 8N
Replaces: 9N9273A
(1/8" NPT male thread)
NOTE: Dash mounted. Stainless steel
bezel. Line adapter sold separately.
Description / Application
Oil Gauge Copper Line Kit
(For tractors using 1/8" x 6' copper oil
line) (6' - 1/8" line, (2) 5/16 - 24 UNF Nut,
(2) compression sleeves, (1) 1/8 - 27 NPTF
female to 5/16 - 24 UNF male adaptor)
NOTE: Use w/ ABC538 fitting.
Oil Gauge Line to Block Elbow
(Oil Terminal Block)
Fits: 9N, 2N, Replaces: 9N6722 (1/4" pipe
into block, 1/4" tube & 3/16" tube)
Oil Gauge Line to Block Elbow
Fits: 8N (1947-52)
Replaces: 8N6722
(1/4" pipe into block, (2) 1/4" tubes)
Fuel gauges
(0-80 PSI)
Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600,
700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
series (1939-64), Replaces: FAD9273A
(1/8" NPT male thread)
NOTE: Black bezel. Line adapter sold
separately.
(80 PSI)
Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600,
700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
series (1939-64), Replaces: FAD9273A
(1/8" NPT male thread)
NOTE: Dash mounted. Stainless steel
bezel. Line adapter sold separately.
FDS275
Fits: 501, 601, 701, 801, 901,1801, 2000, 4000
4-cyl. series (1958-64)
REP275 Replaces: 310948
FDS276 Replaces: 310949
(14-122 Ohm)
FDS276
Description
Order # Price
6-volt Positive Ground Fuel Gauge...................... FDS275......... $29.95
w/ Black Bezel
12-volt Negative Ground Fuel Gauge.................. FDS276......... $29.95
w/ Black Bezel
NOTE: Will work w/ FDS199 & FDS200 Fuel Sending Units.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Fuel sending units, parts
Order #
Price
Description / Application
$29.95
Fuel Sending Unit (For 6-volt positive
ground, For 12-volt negative ground)
Fits: 601 & 701, 2000 4-cyl. series (1958-64)
gas, diesel w/ 6-volt or 12-volt systems
Replaces: 6-volt: 310938, 12-volt: 310939
(5-1/2" Long, Resistance = 14 - 122 OHM
range) NOTE: Will work w/ FDS275 &
FDS276 fuel gauges. Does not work w/
O.E.M. style fuel gauges.
FDS199
$29.95
Fuel Sending Unit (For 6-volt positive
ground, For 12-volt negative ground)
Fits: 801, 901 & 1801 series, 4000 4-cyl.
(1958-64) gas, diesel w/ 6-volt or 12-volt
Replaces: 6-volt: 310940, 12-volt: 310941
(8-3/4" long, Resistance = 14 - 122 OHM
range) NOTE: Will work w/ FDS275 &
FDS276 fuel gauges. Does not work w/
O.E.M. style fuel gauges.
$12.95
FDS2700
$6.95
NEW! Sending Unit Lock Ring
Fits: Same as FDS199, FDS200; 6000
Replaces: FEG99275A
(2.682" O.D., 1.895" I.D.)
NOTE: Retains sending unit to tank.
NEW! Sending Unit Gasket
Fits: Same as FDS2694
Replaces: B9NN9276A
USA made
Water temperature gauges, part
Price
Description / Application
$42.15
Water Temperature Gauge
Fits: Dexta, Super Dexta
Replaces: 957E10883
(86-1/2" long lead)
NOTE: Stainless steel bezel, (Illuminated).
For 2" dia. opening
Cluster gauges, parts
Order #
Price
FDS389
$99.95
Dash Gauge Cluster Assembly
Fits: Some 2000, 3000, 3400, 3500, 4000,
4400, 4500, 5000, 7000 (1965 & up)
Replaces: C5NN10849L, EHPN10849A
NOTE: Clockwise needle rotation. For
generator equipped tractors only.
FDS391
$99.95
Dash Gauge Cluster Assembly
Fits: 2600, 3600, 4600, 4600 SU, 2310, 2610,
2810, 2910, 3610, 3910, 4610, 5600, 6600,
7600, Early 5610 (up to 11/1987), 6610
(up to 9/1985); Industrials: 231, 250C,
335, 340, 445, 531, 540, 545, Replaces:
83953544, D8NN10849TB, E5NN10849BA,
E7NN10849BA NOTE: Counter-clockwise
needle rotation.
FDS1726
$14.95
FDS423
$15.95
NOTE: ABC gauges vary from original appearance.
Order #
Price
FDS2673
$49.95
FDS2424
ABC081
$29.95
$29.95
Description / Application
NEW! Temperature Gauge Adapter Pipe
Fits: 9N, 2N, 8N (3-5/8" long, 1-1/2" O.D;
Uses 5/8-18 UNF temperature gauge lead)
NOTE: Installs in upper hose. Slide new
adapter pipe in place, drill 2" O.D. hole
in dash to mount gauge. Use w/ gauge
ABC081 or FDS2424.
Water Temperature Gauge w/ Bracket
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 4000 4-cyl. series (1953-64) gas,
diesel except Majors, Dexta
Replaces: C3NN18287A (36" lead)
NOTE: Black bezel. For 2" dia. opening.
Description / Application
Cluster Gauge Gasket
Fits: Same as FDS389, FDS391
Replaces: C5NN10A949C
USA made
Tachometer Cable w/ Metal Sheath
(For FDS389, FDS391 Dash Gauge
Cluster Assemblies), Replaces: 82847520,
D9NN17365AA, D9NN17365AB
(48" long)
ABC1486 $6.30
Electric Oil Pressure Switch
Fits: 2000 3-cyl. thru TW35 except 6000,
TM115 thru TM190, TS90 thru TS115 (1965
& up) (All w/ analog gauges)
FDS1491
Water Temperature Gauge
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 4000 4-cyl. series (1953-64) gas,
diesel except Majors, Dexta
Replaces: C3NN18287A
(36" lead) NOTE: Stainless steel bezel. For
2" dia. opening.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$8.15
Electric Water Temperature Sending Unit
w/ Adaptor Bushing fits the following
1965 & up: 2000 3-cyl. series, 2600, 3000
series, 4600, 4000 3-cyl. series, 4600, 5000
series, 5600, 6600, 7000 series, 7600, 8000,
8600, 9000, 9600, 9700, TW10, TW20, TW30;
Industrial: 231 thru 340B, 3400, 3500, 3550,
420 thru 4500, 515 thru 755B
Replaces: C4AH10884A, D5NN10884A,B,
81784077, 83903061, 87554838, 87712906
NOTE: Fits either 1/8" or 3/8" thread size
as adaptor bushing is including.
155
Gauges
FDS2694
Order #
FDS1852
Ford
FDS200
Water temperature gauges, part cont...
Tachometers, parts
Order #
Price
FDS058
$45.00
Electrical outlet socket, parts
Description / Application
Order #
Price
ABC395
$24.95
Tachometer
Fits: 8N SN: 245637 & up (1950-52)
Replaces: 8N17360A1
FDS147
$55.00
Ford
FDS060
$14.95
Gauges / Electrical parts
FDS062
FDS396
ABC565
FDS1849
$55.00
$55.00
$13.95
ABC1868 $19.95
Tachometer Cable Assembly
w/ Metal Sheath
Fits: 8N, Replaces: 8N17365
(32-1/2" long)
ABC2285 $4.95
Tachometer (4 Speed)
w/ OEM style needle
Fits: Jubilee, NAA, 501, 600, 700, 800, 900,
1801, 2000, 4000 4-cyl. series (1953-64) gas,
diesel, Replaces: C3NN17360N
Tachometer (5 Speed)
w/ OEM style needle
Fits: 600, 800, 900, 2000, 4000 4-cyl. series
(thru 1964) gas, diesel
Replaces: C3NN17360K
IHS697
156
$28.50
Connector Plug (For ABC395)
(3.045" long, .760" wide, .340" hole dia. for
wires) NOTE: Plated brass pins, wires
must be soldered or crimped.
Electrical Outlet Socket Boot
Fits: Tractors using single wire outlet
NOTE: 1 wire style. Does not fit ABC395.
Battery cables - USA made
unless otherwised noted
EO = Eyelet Opening
L = Length
Order #
Tachometer (Select-O-Speed)
Fits: 501, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl. series (thru 1964)
gas, diesel (All w/ Select-O-Speed
transmission), Replaces: C3NN17365A,
C3NN17360J
Price
Specifications
Ground Cables (Non-Insulated)
Tachometer Cable Assembly w/ Metal
Sheath fits: NAA, Jubilee, 501, 600, 700,
800, 900, 1801 series, 2000, 4000 series 4-cyl.
(thru 1964) gas, diesel
Replaces: B9NN17365B
(30-1/2" long)
$58.50
$27.95
Electrical Outlet Socket
(For Implements w/ Lights)
Fits: Ford models
NOTE: 2 plated brass pins.
Heavy Duty; Straight terminals
Tachometer (Tractor Meter)
Fits: Dexta, Super Dexta
Replaces: 957E17360A, 957E17360D
NOTE: Diesel only.
FDS1851
Description / Application
Tachometer Cable Assembly w/ Nylon
Sheath fits: Dexta, Super Dexta
Replaces: 81718522, 957E17365C
(34-3/4" long)
NOTE: Diesel only.
ABC401
$13.90
(2 Gauge, EO = 7/16", L = 6")
ABC411
$15.80
(2 Gauge, EO = 7/16", L = 9")
ABC405
$17.95
(2 Gauge, EO = 1/2", L = 13")
ABC1175
$17.30
(2 Gauge, EO = 7/16", L = 14")
ABC421
$22.50
(2 Gauge, EO = 3/8", L = 19")
ABC403
$25.85
(2 Gauge, EO = 7/16", L = 24")
Insulated Battery Cables
ABC407
$16.99
(2 Gauge, EO = 3/8", L = 10-1/2")
ABC415
$15.40
(2 Gauge, EO = 3/8", L = 12")
ABC413
$19.15
(2 Gauge, EO = 3/8", L = 14-1/2",
90º terminal ends)
ABC1582 $12.15
(2 Gauge, EO = 3/8", EYELET BOTH
ENDS, L = 16-1/4")
ABC417
$18.50
(2 Gauge, EO = 3/8", L = 21")
NOTE: May have to drill eyelet hole
bigger on some applications.
ABC419
$19.95
(2 Gauge, EO = 3/8", L = 27")
Battery covers, trays
Tachometer Cable w/ Metal Sheath
Fits the following w/out cabs 12/1987 &
up: 7810, 7910, 8210, 8530, 8630, 8730, 8830,
TW5, TW15, TW25, TW35
Replaces: E8NN17365AA
(61-1/4" long with square ends)
Order #
FDS168
Price
$59.95
Description / Application
Battery Cover w/ Access Door & Battery
Decal for cover (For 6-volt system)
Fits: 8N w/ flat ground cable
Replaces: 8N5162
NOTE: Powder coat Ford red.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Battery covers, trays cont...
Order #
Price
FDS169
$59.95
FDS1235
$64.29
Description / Application
Battery Cover w/ Access Door & Battery
Decal for cover
Fits: 1953-57 6-volt round cables; NAA,
Jubilee, 600, 700, 800, 900 series (All 6-volt)
Replaces: NAA5162A, NCA10718A
NOTE: Powder coat Ford red.
Battery Tray w/ Air Cleaner Mounting
Bolts fits: 2N (1942-47)
Replaces: 2N10732, 2N10734, 2N10735
NOTE: Powder coat gray.
$59.50
FDS030
$64.95
Battery Tray (Support Assembly)
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801 series, 2000, 4000 series (1953-64) gas
Replaces: C0NN10732T, NCA10732T
USA made NOTE: Powder coat Ford red.
FDS1271
$98.10
Battery Tray fits the following diesel
tractors w/ 128 AMP battery: 2000, 2110,
3000, 3100, 3400, 3500, 3550, 4000, 4110,
4400, 4500 (1965-67)
Replaces: C5NN10723H
FDS371
$38.95
FDS369
FDS370
FDS372
$23.75
$9.95
$34.95
Battery Hold Down
Fits: 501, 601, 701, 801, 901, 1801, 2000 &
4000 series (thru 1964) (All 4-cyl. & w/ 12volt system), Replaces: 311099
(For Battery size: 16-1/4" long x 7-5/8"
wide; Mounting holes c.c. = 17-1/4)
IHS721
$8.95
J-Bolt (pair)
Fits: Ford models
(5/16"-18" UNC x 10-3/4")
FDS421
$6.25
LH Battery Hold Down Bolt w/ Wing Nut
Fits: (NAA, Jubilee when using FDS030
battery tray), 501, 600, 700, 800, 900, 2000
4-cyl., 4000 4-cyl. series gas (1953-64)
Replaces: NCA10728-A (3" o/a length)
Economy main wiring harnesses
w/ instructions
Order #
Price
Battery Hold Down fits: 8N, Jubilee, NAA,
501, 600, 700, 800, 900, 2000 4-cyl., 4000
4-cyl. series (thru 1964) (All gas & w/
6-volt battery), Replaces: NCA10718A
(9-3/16" long x 7-1/16"wide; Mounting
holes c.c. = 10-1/8") USA made
NOTE: 16 gauge steel. New & improved
quality!
Battery Hold Down Rod
Fits: 2N (1943-47), 8N, NAA
Replaces: 2N10728, 8N10728
Battery Retainer fits: 9N, 2N (1939-47)
Replaces: 2N10721 (9-1/8" long x 7-1/16"
wide) NOTE: Improved version to fit 9N.
To use on 9N must also purchase FDS371
battery hold down, pair (9N10728C &
9N10748).
Application
ABC075 $27.95
(For 6-volt generator systems only)
Fits: 9N, 2N w/ single pole generator
Replaces: 2N14401, 9N14401C
NOTE: Has flame retardant cloth covering.
Instruction sheet included. Does not
include ignition switch & light wires.
ABC076 $27.95
(For 6-volt generator systems only)
Fits: 8N w/ front-mounted distributor
Replaces: 8N14401B NOTE: Has flame
retardant cloth covering. Instruction
sheet included. Does not include ignition
switch & light wires.
ABC077 $27.95
(For 6-volt generator systems only)
Fits: 8N w/ side-mounted distributor
Replaces: 8N14401C NOTE: Has flame
retardant cloth covering. Instruction sheet
included. Light wires not included, front
engine harness only.
Description / Application
Battery Hold Down, Pair
Fits: 9N (thru 1942)
Replaces: 9N10728C (RH), 9N10748 (LH)
NOTE: Sold as a RH / LH pair.
Description / Application
Ford
Price
Price
$17.95
Battery Tray (Support Assembly)
Fits: 8N (1947-52)
Replaces: 8N10732
USA made
Battery hold downs, parts
Order #
Order #
ABC474
FDS277
$33.75
ABC079 $64.95
FDS376
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$34.95
(For alternator systems only)
Fits: 8N w/ side-mounted distributor &
1-wire alternator, Replaces: 8NL10301
NOTE: Does not include light wires.
(For 6-volt generator systems only)
Fits: NAA, Jubilee, 600, 700, 800 & 900
series gas (1953-57), Replaces: FDN14401B
NOTE: Light wires included.
(For 6-volt generator systems only)
Fits: 501, 601, 701, 801, 901 series, 2000
4-cyl., 4000 4-cyl. gas (1957-64)
NOTE: Does not include ignition switch
wires, light wires or fuel sender wires.
157
Electrical parts
FDS029
Battery hold downs, parts cont...
Fuse holder
Quality wiring harness kits
USA made
Fits: 8000 thru 9600 & Industrial
Replaces: C7NN14411A
USA made
NOTE: Wiring harness kits include light
wires and diagram. Original style braiding
Description
w/ soldered terminals. Restoration quality.
Alternator conversion harnesses also
available by special order. Call or email for a
Order # Price
Fuse Holder........................................................... ABC389........... $10.95
NOTE: Rated at 20 AMP; Fits in 1/2" hole.
quote.
Order #
FDS470
FDS472
Price
Application
$148.20 (For 6-volt generator systems only)
Fits: 9N, 2N w/ single terminal generator
Replaces: 2N14401, 9N14401B
$171.60 (For 6-volt generator systems only)
Ford
Electrical parts
Order #
Price
ABC1862
$29.95
6-volt Cigarette Lighter w/ Socket
Fits: 8N, NAA w/out bracket w/ 6-volt
system, Replaces: 8N9004601
NOTE: Anodized aluminum knob
engraved w/ the word "LIGHTER".
IHS949
$29.95
12-volt Cigarette Lighter w/ Socket
Fits: 8N, NAA w/out bracket when
converted to 12 volt
NOTE: Anodized aluminum knob
engraved w/ the word "LIGHTER".
IHS1784
$22.50
12-volt Cigarette Lighter w/ Socket
Fits: 2610 thru TW35
Replaces: E3NN15760AA
NOTE: Black plastic knob w/ the word
''LIGHTER'' in white print.
Fits: 8N w/ front mounted distributor up
to SN: 263843, Replaces: 8N14401B
FDS1703 $183.50 (For 6-volt generator systems only)
Fits: 8N w/ side mounted distributor SN:
263844 & up (1950-52), Replaces: 8N14401C
FDS474
Cigarette lighters
$183.50 (For 6-volt generator systems only)
Fits: NAA, Jubilee, 600, 700, 800, 900 gas
series (1953-57) w/out fuel gauge
Replaces: FDN14401B, FAF14401B
NOTE: If customer has a fuel gauge will
need to reuse gauge & sending unit wires.
FDS2869 $234.00 NEW! Fits: 501 thru 981 series, 1811, 2000
4-cyl., 4000 4-cyl. series gas (1958-64) (All
using charge indicator light & generator)
Replaces: C3NN14401
Ignition parts
Wiring clips
Order #
Price
FDS271
$1.50
EACH
FDS269
$2.75
EACH
FDS267
$3.90
EACH
FDS268
$3.95
EACH
FDS270
$9.95
EACH
ABC545
$4.65
EACH
158
Description / Application
Order #
Application
Price
Coils / Resistor
Fits: 9N, 2N, 8N (1939-52)
I. Headlight wiring to hood (7 required)
Replaces: 358297S
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
I. Rear light wire (6 required)
Replaces: 9N17668
Fits: 8N; I. Electric wiring to instrument
panel support bracket (1947-52) (1
required); II. Main wiring assembly to
instrument panel brace (1 required);
III. Wiring to hood top reinforcement (195052) (3 required), Replaces: 51C14197
Fits: 8N; I. Electric wiring to instrument
panel brace (1 required)
Replaces: 8N14197 USA made
ABC011
(6-volt)
$19.95
ABC509
(12-volt)
$19.95
FDS072
$29.95
FDS1137
$4.65
ABC119
$30.50
Fits: 8N, NAA, Jubilee (1947-54);
I. Rear light wire to brake actuating shaft
(2 required), Replaces: 8N14565 USA made
Fits: 2000 3-cyl thru 4140 (1965 & up);
Serviceable for 8N thru 4000 4-cylinder
(up to 1964); I. Rear light wire to brake
actuating shaft (2 required)
Replaces: 354475S2, 380568S36
Description / Application
Distributor Coil (Metal Housing) &
Mounting Bracket fits: 8N, NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 4000
series; Fits Ford models w/ barrel-type
coil (All w/ side mounted distributor)
ABC011 Replaces: D3PF12029AA,
E8T12029BA
ABC509 Replaces: D5TE12029AB
NOTE: ABC509 is internally resisted. See
website for full applications.
6-volt Distributor Coil
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mounted distributor
Replaces: 9N12024
Distributor Coil Retainer Wire
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mount distributor
Replaces: 9N12137
12-volt Distributor Coil
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mounted distributor
NOTE: Must use w/ABC366 resister.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Ignition parts cont...
Order #
Price
Ignition parts cont...
Description / Application
Order #
Price
Coils / Resistor cont...
ABC348
ABC366
$57.10
$7.75
HOT" Coil (55000-volts)
Fits: Ford models w/ 12-volt system
EXCEPT front mount distributor tractors
NOTE: Maximum voltage for faster
starting, reduced plug fouling & longer
plug life. Must use w/ ABC366 resistor.
Universal 12-volt Voltage Resistor
(2-Terminal Style)
Fits: Ford models NOTE: Used to step
down 12-volt battery. Limits voltage
to coil when using 12-volt battery. 1.5
OHMs on 6-volt battery to 4.0 OHMs for
12-volt battery. Resistor gets very hot.
Dust Cover
$8.95
$284.30
Front Mount Distributor
Fits: 9N, 2N, (8N up to SN: 263843)
(1939-50), Replaces: 9N12100
FDS1141
$38.60
FDS1144
$4.65
ABC064
$4.40
FDS310
$98.50
ABC062
$262.50
FDS316
$248.50
Distributor Caps, parts
ABC061
$14.99
Distributor Cap fits: 9N, 2N, (8N up to
SN: 263843) (1939-50) w/ front mount
distributor, Replaces: 9N12106C
FDS1150
ABC063
FDS224
$3.95
$11.00
$8.00
ABC159
$4.50
ABC128
$7.15
Distributor Cap Spring Clip fits: 9N, 2N,
(8N up to SN: 263843) w/front mount
distributor, Replaces: 9N12144
NOTE: 2 used per tractor;
Sold individually.
Distributor Cap fits: 8N SN: 263844 & up,
NAA, Jubilee, 501, 600, 700, 800, 900, 1801,
2000, 4000 4-cyl. series w/ original style
side mounted distributor (thru 1964)
Replaces: NCA12106A
Distributor Cap Clip / Clamp
Fits: 8N SN: 263844 & up, NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 4000
4-cyl. series (thru 64), 6000 (All w/ side
mounted distributor), Replaces: 7RA12144
Rotor Clip fits: Late 8N SN: 263844 & up,
NAA, 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cyl. gas (thru 1964), 6000 (All w/
side mounted distributor)
Replaces: 8N12213 USA made
Distributor Cap fits: 2000, 2600, 2610,
3000, 3400, 3500, 3600, 3610, 4000, 4100,
4400, 4500, 4600, 4610 3-cyl. gas (1965-80)
Replaces: C5NF12106A, E3NN12106A,
83937262
Distributor Breaker Plate Assembly
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mount distributor
Replaces: 9N12150
Distributor Breaker Plate Retaining Clip
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mount distributor
Replaces: 91A12146
4-Piece Distributor Gasket Kit
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mount distributor
Replaces: 9N12104 USA made
Electrical parts
Dust Cover Assembly fits: 8N SN: 263844
& up, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000, 4000 4-cyl. series gas (thru
64), Replaces: FAA12239A NOTE: For side
mount distributors, includes gasket.
ABC060
Ford
ABC277
Description / Application
Distributor Caps, parts cont...
Distributor Shaft (Cam & Weight Assy)
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mount distributor
Replaces: 9N12187
Side Mount Distributor (NEW not
Rebuilt)
Fits: 8N SN: 263844 & up (1950-52)
Replaces: 8N12127B
NOTE: Has external oiler & terminal for
coil wire. Original Style
Side Mount Distributor (NEW not
Rebuilt) w/ Slotted Drive Shaft
Fits: NAA, Jubilee
Replaces: FAC12127D
FDS317
$248.50
FDS281
$4.50
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Side Mount Distributor (NEW not
Rebuilt) w/ Hex Drive Shaft
Fits: 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cyl. series (thru 1964)
Replaces: FDN12127A, 311185
NOTE: 1/4" hex drive.
Primary Conductor (For side mounted
distributors) fits: 8N SN: 263844 & up,
NAA, Jubilee, 501, 600, 700, 800, 900, 1801,
2000, 4000 4-cyl. series (thru 64)
Replaces: 8N12209 NOTE: Copper.
Ignition parts continue on next page
159
Ignition parts cont...
Order #
Price
Ignition parts cont...
Description / Application
Order #
Electrical parts
Ford
Spark Plug Wiring Sets, parts
FDS149
$12.50
FDS467
$14.95
FDS1756
FDS331
FDS1754
FDS2539
FDS2543
160
$5.95
$14.95
$2.95
$39.95
$49.95
Price
Description / Application
Spark Plug Wiring Sets, parts cont...
Spark Plug Wiring Set w/ 90° boots
Fits: 9N thru 4000 4-cyl. models
USA made NOTE: Copper core w/
aluminum coating to prevent corrosion,
waterproof neoprene. Cut to length.
Spark Plug Wiring Set
Fits: 8N w/ side mounted distributor
(generator on left side) USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Pre-Assembled - No cutting or
fitting required.
Spark Plug Wire Grommet fits: 8N SN:
263844 & up (1950-52) w/ side mounted
distributor, Replaces: 7RA12297
(.970" o/a length, .708" hole I.D.,
.880" center O.D., 1.180" end O.D.)
NOTE: Holds 4 plug wires together.
Spark Plug Wiring Set fits: NAA, Jubilee,
501, 600, 700, 800, 900 series, 1801, 2000,
4000 4-cyl. series (1953-64) USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Pre-Assembled - No cutting or
fitting required.
Spark Plug Wire Rubber Retainer
Fits following gas, LP: 8N SN: 263844 &
up (1950-52) w/ side mounted distributor
(1 used); NAA thru 4000 4-cyl (1953-64)
(2 used), Replaces: 7RA12271
(.857" length, .125" thick, .508" hole I.D.)
USA made NOTE: Sold individually. On
8N holds #3 & #4 plug wires together (1
used). On NAA & up holds #1 & #2 and
#3 & #4 plug wires together (2 used).
NEW! Spark Plug Wire Set
Fits: 2000 3-cylinder thru 4610 (1965-80)
Replaces: DDPN12259A, DHPN12259A
USA made NOTE: Copper core w/
aluminum coating to prevent corrosion.
Waterproof neoprene. Pre-assembled,
no cutting or fitting required. must use
w/ aftermarket coil #ABC509 etc., as coil
wire boot will NOT fit original Ford coil.
NEW! Spark Plug Wire Set
Fits: 5000, 5100, 5190, 5200, 5340,
6600; Industrial: 5500, 5550 4-cylinder
(1965 & up), Replaces: D7NN12287A,
DHPN12259A USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion. Waterproof
neoprene. Pre-assembled, no cutting or
fitting required. Must use w/ aftermarket
coil #ABC509 etc., as coil wire boot will
NOT fit original Ford coil.
ABC326
$19.85
Spark Plug Wiring Set w/ 90° boots
Fits: 6-cyl. models
USA made NOTE: Copper core w/
aluminum coating to prevent corrosion,
waterproof neoprene. Cut to length.
ABC2863
$19.85
NEW! Spark Plug Wiring Set w/ Straight
Boots fits: 6-cyl. models
USA made NOTE: Copper core w/
aluminum coating to prevent corrosion,
waterproof neoprene. Cut to length.
Spark Plugs (Autolite)
NOTE: Check spark plug specifications before ordering as some
models may use more than one type.
ABC172
$3.80
Fits: 9N, 2N, 8N w/ front mount
distributor (1939-50)
ABC172 specifications: 14 mm thread, 7/16" reach, 13/16" hex,
Autolite 437, Plug Gap .025"
ABC322
$3.45
Fits: 8N w/ side mount distributor, NAA,
Jubilee, 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cylinder series (thru 1964)
ABC322 specifications: 14 mm thread, 7/16" reach, 13/16" hex,
Autolite 216 Plug Gap .025"
ABC323
$3.80
Fits: 2000 3-cylinder, 2600, 2610, 3000,
3600, 3610, 4000 3-cylinder, 4600, 4610,
5000 (1965 & up)
ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex,
Autolite 405, Plug Gap .020"
Ignition Tune-Up Kits
FDS473
$19.95
FDS137
$32.60
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mounted distributor
NOTE: Kit includes: Points, condensor,
rotor, spark plugs & ABC064 4-pc
distributor gasket kit; Spark Plug Gap
.025, Point Gap .015.
FDS476
$12.65
Fits: 8N SN: 263844 & up, NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 4000
series (1950-64), 6000 w/ side mounted
distributor NOTE: Kit includes: Points,
condensor & rotor; Point Gap .025
FDS138
$24.90
Fits: 8N SN: 263844 & up, NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 4000
series (1950-64) w/ side mounted
distributor NOTE: Kit contains: Points,
condensor rotor & spark plugs; Spark
Plug & Point Gap .025
Fits: 9N, 2N, (8N up to SN: 263843)
w/ front mounted distributor
NOTE: Kit includes: Points, condensor &
rotor; Point Gap .015
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Ignition parts cont...
Order #
Price
Starters, parts cont...
Description / Application
Ignition Tune-Up Kits cont...
FDS420
Fits: 2000, 2110, 2600, 2610, 3000, 3600,
3610, 3900, 3910, 3930, 4000, 4110, 4600,
4610 (1965 & up) (All 3-cyl.). Industrials:
3400, 3500, 4400, 4500, 230A, 231, 334,
340, 340A, 420, 445, 515, 531, 535, 540,
540A, 545 w/ original Autolite distributor
(All 3-cyl.) NOTE: Kit includes: points,
condensor, rotor & spark plugs; Spark
Plug & Point Gap .025
$28.35
Order #
Price
ABC517
$14.45
ABC068
$12.75
Fits: 9N, 2N, (8N up to SN: 263843)
(All w/ front mount distributor)
Replaces: B2NN12200A, 9N12200
ABC069
$15.75
Starter Solenoid Relay Assembly (3 Post)
Flat Mount fits: NAA, Jubilee, 600, 700, 800,
900 (1953-57) w/ 4-cyl. gas engine
Replaces: NCA11450A
NOTE: 6-volt or 12-volt system.
$5.95
Fits: 8N SN: 263844 & up, NAA thru 4000
4-cyl. series (1950-64), 6000 (All w/ side
mount distributor)
Replaces: C0NN12200A, FAB12200A
FDS282
$20.40
12-volt Starter Solenoid Relay Assembly
(Flat Mount) (4 Post) fits: 501, 601, 701, 801,
901, 1801, 2000, 4000 4-cyl. series (195864) except Lucas equipped & 6000 gas;
Activates manifold heater on 6000 diesel
Replaces: 311006, 311007
ABC139
$15.90
12-volt Starter Solenoid Relay Assembly
(Flat Mount) (4 Post)
Fits: 2000, 3000, 4000 gas (1965 & up)
w/ 4-1/2" dia. starter
Replaces: D2AF11450AA
NOTE: Do not use the "I" terminal if
replacing a 3-terminal switch.
ABC508
$5.35
ABC506
$5.30
Order #
Price
FDS297
$145.95
ABC129
$28.95
ABC227
FDS324
FDS390
$39.30
$164.95
$171.75
Description / Application
6-volt Starter (NEW not Rebuilt)
w/ Drive (Bendix)
Fits: 9N, 2N, 8N
Replaces: 8N11001 (starter), 52-11350
(drive)
Ratchet Style Starter Drive (Bendix)
Assembly
Fits: 9N, 2N, 8N (1939-52)
Replaces: 52-11350C-PD
Ratchet Style Starter Drive (Bendix)
Assembly fits: NAA, Jubilee, 501, 600, 700,
800, 900, 1801, 2000, 4000 series 1953-64
(All 4 cyl. gas, LP, diesel)
Replaces: C1AF11350A
Starter w/ Drive (Bendix)
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 1811, 2000, 4000 series (1953-64)
(All 4 cyl. gas, LP, diesel)
Replaces: C3NF11002D, C3NF11001B,
C3NF11002E
12-volt Starter (New not Rebuilt) w/
Solenoid & Drive (Bendix) fits: 231, 335,
340, 445, 531, 540, 550, 555, 2000 3-cyl.,
2310, 2600, 2610, 2810, 2910, 3000, 3400,
3500, 3600, 3610, 3910, 4000 3-cyl., 4600,
4610, 5000, 5600, 5610, 6600, 6610, 7000,
7600, 7610, 7710, 8000, 8600, 9000 (All
diesel1965 & up), Replaces: D4NN11000BR
& D8NN11000CE NOTE: Diesel only, No
returns if nose cone is broken.
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 18 NC starter
terminals) NOTE: Brass.
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 24 NF starter
terminals) NOTE: Brass.
Covers
FDS340
$7.50
Rubber Cover (For Starter Control Wire
Terminal - Goes on wire to solenoid)
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000 4-cyl., 4000 4-cyl. series
(1947-64), Replaces: 8N11115
FDS341
$5.95
Rubber Cover (For Starter Push Switch)
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000 4-cyl., 4000 4-cyl. series
(1947-64), Replaces: 8N11113
FDS342
$11.99
Rubber Cover (For Battery Cable to Starter
Solenoid) fits: 8N, NAA, Jubilee (1947-54)
Replaces: 86H14321A, C0NN14321A,
C7NN14321A, S115407
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Starters, parts continue on next page
161
Electrical parts
Starters, parts
Starter Solenoid Relay Assembly
(Saddle Mount) (3 Post)
Fits: 8N (1947-52)
Replaces: 8N11450
NOTE: 6-volt or 12-volt system.
Ford
FDS471
$5.95
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
starters (2.955" long, .915" wide, .140" dia.
rivet holes, 2.650" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Customer must stamp numbers.
Starter Solenoid Relay Assemblies, parts
Rotor Buttons
FDS469
Description / Application
Starters, parts cont...
Starters, parts cont...
Order #
Price
Order #
Description / Application
Price
$16.40
Manual Starter Switch (Base Mount)
(For 7/8" hole) fits: 9N up to SN: 12499
(1939-40), Replaces: 9N11450A
(Dash mount for 1-3/4" mounting hole)
NOTE: Will work on 6 or 12 volt.
FDS313
$24.95
Starter Push Switch
Fits: 9N SN: 12500 & up, 2N
Replaces: 9N11450B
(2-3/4" c.c. bolt holes)
NOTE: Restoration quality.
ABC067
$24.95
Starter Push Switch w/ Mounting Gasket
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000, 4000 4-cyl. series (1947-64)
(All w/ standard transmission)
Replaces: 8N11500 NOTE: Does not fit
Select-O-Speeds. Will work on 6 or 12
volt systems.
Ford
ABC066
Electrical parts
ABC233
$12.50
Description / Application
Ignition / Key Switches cont...
Push Button Switches
Starter Push Switch, Extra heavy duty
momentary push button switch
Fits: Ag & Light Industrial equipment
(Mounting stem 5/8" - 32 thread, 21/32"
long) NOTE: Depress button: ON; Spring
return: OFF. Two screw type terminal.
Up to 35 V (DC), rubber cap for dust and
moisture protection.
FDS330
$14.40
Ignition / Key / Switch (For tractors w/
out cold start) fits: 230A, 231, 233, 234, 333,
334, 335, 420, 515, 530A, 531, 532, 535, 550,
650, 750, 2000 thru 7000, 7100, 7200, 7410,
7600, 2600 thru 7700, 7700 & 7710, 8000
thru 9700, TW10, TW20, TW30, 2310 thru
4610, 5110 thru` 7710, 7810 thru 8210, 8530
thru 8830, TW5 thru TW35, 3230 thru 4830
except Compacts (All 1965 & up)
Replaces: C5NN11N572A, D5NN11N572A,
E8NN11N501AA NOTE: Seven spade
terminal.
FDS400
$2.95
LUCAS Ignition Key (Fits FDS330 Switch)
Fits: 230A, 231, 233, 234, 333, 334, 335, 420,
515, 530A, 531, 532, 535, 550, 650, 750, 2000
thru 7000, 2310 thru 4610, 2600 thru 7700,
3230 thru 4830, 5110 thru 7710, 7100, 7200,
7410, 7600, 7700, 7710, 8000 thru 9700, 7810
thru 8210, 8530 thru 8830 TW5 thru TW35
except Compacts (All 1965 & up)
Replaces: E7NN11603AA
FDS1449 $12.95
Neutral Safety Starter Switch fits: 2000
3-cyl. thru TW35; Industrials: 230A thru
755B (1965 & up), Replaces: C5NN7A247C,
C7NN7A247A, 81817901
Push / Pull Switches
ABC398
ABC489
$8.20
$14.50
Universal 2-Position Push / Pull Starter
Switch fits: Ag & Light Industrial
equipment (10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, two
screw type terminals, non-fused. This can
be used on battery ignition systems only.
Magneto Push / Pull Ignition Switch
(O.E.M) fits: Ford models w/ Magneto
Ignition NOTE: One screw type terminal;
Out: ON; In: OFF.
Electrical resistor assys., parts
Order #
Price
FDS263
$19.95
FDS264
$19.95
FDS397
$12.15
Terminal Junction Block fits: 8N SN: 263844
& up w/ side mounted distributor, NAA,
Jubilee, 541, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl. series (thru 64)
Replaces: 8NNN14448A
ABC366
$7.75
Universal 12-volt Voltage Resistor
(2-Terminal Style) fits: Ford models
NOTE: Used to step down 12-volt battery.
Limits voltage to coil when using 12-volt
battery. 1.5 OHMs on 6-volt battery to 4.0
OHMs for 12-volt battery. Resistor gets
very hot.
Ignition / Key Switches
ABC065
IHS760
ABC400
162
$12.95
$19.95
$14.85
Ignition / Key Switch w/ 2 Keys
Fits: Ford models (1939-64)
Replaces: 8N3679C
NOTE: Will not fit Dexta & Fordson
Major.
NEW! Ignition / Key Switch w/ 2 Keys &
Mounting Nut fits: Ford models (1939-64)
Replaces: 8N3679C USA made
NOTE: Will not fit Dexta & Fordson
Major. 2 spade terminal switch
Ignition / Key Switch w/ 2 Keys
Fits: Ag & Light Industrial equipment
(3/4" dia. thread)
NOTE: Four stud type terminals.
Description / Application
Resistor Assembly
Fits: 9N, 2N
Replaces: A8NN12250B
(5/16" machine screw mount OEM style)
Resistor Assembly
Fits: 8N up to SN: 263843
Replaces: A8NN12250A
(3/16" machine screw mount OEM style)
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Generators, parts
Order #
Price
FDS298
$160.35
FDS1157
$149.50
$109.95
FDS436
$26.25
Generator (NEW not Rebuilt) w/ Pulley
Fits: 9N (1940 & up), 2N
Replaces: 2N10000
NOTE: Single-terminal.
NEW! 12-Volt Generator
(NEW not Rebuilt) w/ out Pulley & Nut
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000 4 cyl. & 4000 4 cyl. series (195364), Replaces: C4NN10002B, B9NF10002A,
D4PF10002BA
Generator (NEW not Rebuilt)
w/ Tach Drive w/out Pulley
Fits the following 12-volt: 2000, 3000, 3400,
4000, 4400, 4500, 5000, 7000, 8000, 9000
(1965-75), Replaces: C7NN10000C
Generator Pulley (Threaded)
Fits: 9N, 2N
Replaces: 9N10130B
Generator Cut-Out Assembly
Fits: 9N, 2N (1939-47)
Replaces: B0NN10505A
$18.95
ABC519
$14.45
Price
$28.95
ABC1164 $33.50
FDS435
$29.95
Order #
Price
$34.95
ABC073
$28.95
6-volt Voltage Regulator (3-Terminal)
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 4000 4-cyl. series gas (1953-64)
Replaces: FAG10505A
12-volt Voltage Regulator (3-Terminal)
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 4000 4-cyl. series gas, diesel
(1953-64), Replaces: C0NF10505A
12-volt Voltage Regulator (6 Spade
Terminal) fits: 2000, 3000, 3400, 4000, 4400,
4500, 5000, 7000, 8000, 9000 (1965-75)
Replaces: C7NN10505E, D0NN10505A,
D0NN10505B
Alternator, parts
NOTE: Alternators are NEW not rebuilt • To convert
Generator Pulley w/ Keyway
(For 11/16" belt only)
Fits: NAA, Jubilee
Replaces: FAC10130B
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
generator (2.300" o/a length, .732" wide,
.145" dia. Rivet hole, 2" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Customer must stamp numbers.
Order #
Price
Description / Application
ABC535
$149.95
Mini 41 Amp Maximum Alternator w/
Pulley & Diode fits: Ford models requiring
a smaller dia. alternator for clearance
(4-1/2" housing dia., 2-1/2" pulley dia.,
3/8" belt width) NOTE: For 12-volt
negative ground systems only. This
alternator has a built in 3-wire internal
regulator that requires an excitation
circuit. Includes instructions.
ABC2315 $34.95
ABC418
$99.95
Voltage regulators
ABC071
Description / Application
6-volt to 12-volt system. For negative ground systems.
$29.95
FDS434
Order #
ABC074
Description / Application
6-volt Voltage Regulator (3-Terminal)
w/ Mounting Plate
Fits: 8N up to SN: 263843 w/ front mount
distributor, Replaces: 8N10505B
Alternator Pulley (For ABC535)
(0.587" ID, 1.437" o/a length, 3" pulley
O.D., 5/8" belt width)
USA made
63 Amp Alternator w/ Pulley
Fits: Ford models
(6-1/4" housing dia., 2-1/2" pulley dia.,
5/8" belt width) NOTE: For 12-volt
negative ground systems only. Simple
1-wire alternator hook up: Run a wire
from alternator through amp gauge to
positive side of battery! Must rev engine
to 800 - 850 RPM in order for unit to self
excite.
ABC1426 $19.95
6-volt Voltage Regulator (3-Terminal)
Fits: 8N SN: 263844 & up (1950-52)
w/ side-mount distributor
Replaces: 8N10505C
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Pulley only (For ABC418)
(.670" shaft dia., 3-3/16" pulley O.D.,
1/2" belt width)
Alternators, parts continue on next page
163
Electrical parts
ABC072
Description / Application
Ford
FDS403
Voltage regulators cont...
Alternator, parts cont...
Alternator conversion kits, parts cont...
NOTE: Alternators are NEW not rebuilt • To convert
6-volt to 12-volt system. For negative ground systems.
Order #
Price
ABC495
$19.95
Electrical parts
Ford
ABC404
ABC529
$34.95
$23.50
Description / Application
Order #
Price
FDS1099
$45.00
Description / Application
Alternator Bracket Kit
Fits: Late 8N (SN: 263844 & up)
w/ side mounted distributor
Pulley only (For ABC418)
(.670" shaft dia., 2-1/2" pulley O.D.,
5/8" belt width)
FDS1102
$174.95
Universal Mounting Kit
Fits: Ford models except 9N, 2N, 8N
NOTE: Used when switching from a
generator to an alternator. Does NOT
include top adjusting bracket. May
have to be drilled or modified for your
application.
FDS1103
$45.00
FDS1106
$174.95
Universal Top Adjusting Bracket
Fits: Ford models (7/8" wide, 1-1/2" offset,
8-1/4" from farthest end of slot to center
of mounting hole, 3-3/4" slot length, 3/8"
mounting hole) NOTE: Customer may
need to trim to fit some models.
Alternator Conversion Kit
(For negative ground systems)
Fits: NAA, Jubilee, Golden Jubilee
NOTE: Kit contents: Alternator,
internally resisted 12-volt coil, USA
made wiring harness & instructions.
Must use existing alternator belt.
Alternator Bracket Kit
Fits: NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000 4-cyl., 4000 4-cyl. series thru
1964
Alternator Conversion Kit (For negative
ground systems) fits: 501, 600, 700,
800, 900, 1801, 2000 4-cyl., 4000 4-cyl.
series gas (thru 64) NOTE: Kit contains
alternator, bracket kit, belt, internally
resisted 12-volt coil, USA made wiring
harness & instructions. Must also
purchase 12-volt fuel gauge FDS276 &
12-volt light bulbs.
See the following for custom bracket kits
Alternator conversion kits, parts
NOTE: The following alternator conversion kits will update older
6-volt tractors to 12-volt charging system. Does not include
12-v fuel gauge, 12-v sending unit, 60 amp ammeter & 12-v
light bulbs, but can be purchased separately. Brackets can also
be purchased separately.
Order #
FDS1084
Light switches
Price
Description / Application
$177.95
Alternator Conversion Kit
(For negative ground systems)
Fits: 9N, 2N, (8N up to SN: 263843) (193951) (All w/ front mount distributors)
NOTE: Kit contents: Alternator, USA
made bracket kit, belt, resistor, 12volt coil, USA made wiring harness &
instructions.
FDS1089
$45.00
FDS1084B
$4.95
164
$174.95
Price
$16.10
FDS349
$14.95
Fused Light Switch (For Headlight or Tail
Light) fits: Late 8N (1950-52), NAA, Jubilee
(1953-54); Early 600, 700, 800, 900 (All up
to SN: 10614), Replaces: 8N11654B
NOTE: Two screw type terminals.
Like original.
MFS119
$14.95
Work Light Toggle Switch (For Tail Light)
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. series
(thru 64), Replaces: 21C13740, 8N1374
NOTE: Two spade terminals.
FDS351
$14.95
Light Switch (For Headlight or Tail Light)
Fits: 501, 600, 700, 800, 900, 1801, 2000,
4000 4-cyl. series (1955-64)
Replaces: FDN11654A
NOTE: Two screw type terminals.
Like original.
Alternator Bracket Kit
Fits: 9N, 2N, (8N up to SN: 263843)
(1939-51) (All w/ front mounted
distributor) USA made
Bolt Kit only (For FDS1084)
FDS1097
Order #
FDS445
Alternator Conversion Kit
(For negative ground systems)
Fits: 8N SN: 263844 & up w/ side
mount distributor NOTE: Kit contents:
Alternator, bracket kit, internally
resisted 12-volt coil, USA made wiring
harness & instructions. Must use
existing fan belt.
Description / Application
Fused Light Switch w/ Metal Knob
Fits: 9N, 2N, 8N (thru 1949)
Replaces: 9N11652 Like original
NOTE: Uses pig tail connectors.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Headlights, parts cont...
Light switches cont...
Order #
Price
Description / Application
ABC398
$8.20
Universal 2-Position Push / Pull Light
Switch fits: Ag & Light Industrial
equipment (10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, two
screw type terminals, non-fused.
JDS631
$12.95
Universal 3-Position Fused Push / Pull
Starter & Light Switch fits: Ag & Light
Industrial equipment w/ voltage regulator
NOTE: 15 AMP, five terminals, fused,
7/16-20 stem. 10-24 N.C. black plastic
knob.
Price
$26.80
Headlight Ring fits: Some NAA, Jubilee,
501, 600, 700, 800, 900, 1801, 2000, 2310,
2600, 2610, 2810, 2910, 3000, 3600, 3610,
4000, 4100, 4110, 4600, 4610, 5600, 5700,
6600, 6700, 7600, 7700
Replaces: C0NN13045B
(5-3/4" O.D. x 1" wide) NOTE: Check
width measurement before ordering.
FDS272
$10.95
EACH
Headlight Bracket (Round)
Fits: Late 8N, NAA, Jubilee, 501, 600, 700,
800, 900, 1801, 2000, 3000, 4000, 5000, 7000
Series; Will also fit 9N, 2N, Early 8N, but
not correct, Replaces: 8N13472
NOTE: LH & RH are the same;
Sold individually.
FDS098
(RH)
$17.50
Headlights, parts
Need light components? See pg. 167.
Price
FDS177
(6-volt)
$63.95
FDS213
(12-volt)
$63.95
FDS192
(6-volt)
$49.95
FDS193
(12-volt)
$49.95
ABC450
(6 volt)
$14.95
ABC443
(12 volt)
$14.95
IHS647
$34.95
FDS256
$18.80
Description / Application
Complete Headlight Assembly
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
FDS177 Replaces: 2N13006C
FDS213 Replaces: 2N13005C
(5-3/4" sealed beam style)
NOTE: Stamped "TRACT-O-LITE" on
housing.
Complete Headlight Assembly
Fits: 501, 600, 700, 800, 900, 1801, 2000,
4000 series
FDS192 Replaces: 310066
FDS193 Replaces: 310068
(5-3/4")
Sealed Beam Bulb
(For FDS177, FDS213, FDS192, FDS193)
ABC450 Replaces: 4019
ABC443 Replaces: 4419
(5.625")
NOTE: Original style.
FDS099
(LH)
$17.50
ABC480
$8.95
FDS494
$5.95
ABC359
$10.95
Inner Reinforcement Plate
(For Headlight Wing) fits: 9N, 2N, Early
8N (1939-49), Replaces: 9N13102
USA made
NOTE: Clear zinc-plated.
Headlight Reinforcement Washer
Fits: Late 8N - 7700 (1950 & up)
Replaces: FAA13102A
(2-1/4" O.D., 1/2" center hole)
12-volt Bulb (Double contact) w/ Ring
Fits: 1300, 1500, 1700, 1900
Replaces: SBA385120010
Dash lights, parts
12-volt Headlight Assembly
Fits: 2600 & up
(4-1/2")
NOTE: Post is out of back w/ wires thru
post.
Headlight Ring fits: Some 501, 600, 700,
800, 900, 1801, 2000, 4000 4-cyl. series (thru
64), Replaces: C0NN13045A
(5-3/4" O.D., 3/4" wide)
NOTE: Check width measurement before
ordering. Fits FDS177 & FDS213 lights.
Headlight Wing
Fits: 9N, 2N, Early 8N (1939-49)
FDS098 Replaces: 9N13472
FDS099 Replaces: 9N13473
Electrical parts
Order #
Description / Application
Ford
Order #
FDS460
Fits: NAA, Jubilee, 600, 700, 800, 900
(1953-57)
Replaces: NCA13771A, C3NN14662A
FDS293
FDS296
Description
ABC355
ABC356
Order # Price
6-volt Dash Light Assy (For 1-1/8" dia. hole)...... FDS293........... $38.50
12-volt Dash Light Assy (For 1-1/8" dia. hole).... FDS296........... $38.50
6-volt Bulb only (For 1-1/8" dia. hole).................. ABC355.......... $1.45
12-volt Bulb only (For 1-1/8" dia. hole)................ ABC356.......... $0.75
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
165
Tail, work lights, parts cont...
Tail, work lights, parts
Need light components? See pg. 167.
Price
FDS172
$42.85
12-volt Tail Light Assembly (Solid Bucket)
w/ Bulb
Serviceable for 9N, 2N, 8N, NAA, Jubilee,
600, 800 (1939-57), Replaces: 13402, 13466,
13448, 13450, 13560, 30178-S, 9N13404
NOTE: Economy style.
FDS173
$41.15
12-volt Tail Light Assembly (License Lamp
Window) w/ Bulb
Serviceable for 9N, 2N, 8N, NAA, Jubilee,
600, 800 (1939-57), Replaces: 13403, 13448,
13450, 13560, 31788-S
NOTE: Economy style.
FDS444
$65.05
6-volt Duolamp Tail Light Assembly
(License Lamp Window), Glass Lens &
Bulb fits: 9N, 2N, 8N (1939-52)
Replaces: 8N13404 USA made
NOTE: Powder coat 8N grey. Restoration
quality. For 12-v bulb order ABC345.
Electrical parts
Ford
Order #
FDS446
FDS448
FDS442
FDS452
166
$42.95
$65.05
$65.05
$14.95
Description / Application
6-volt Duolamp Tail Light Assembly
(License Lamp Window), Plastic Lens &
Bulb fits: NAA, Jubilee (1953-54)
Replaces: FAA13402A USA made
NOTE: Powder coat. Restoration quality.
For 12-v bulb order ABC345.
6-volt Duolamp Tail Light Assembly,
Plastic Lens & Bulb
Fits: 600, 700, 800, 900 series (1954-57)
Replaces: NCA13402A
NOTE: Powder coat. Restoration quality.
For 12-v bulb order ABC345.
6-volt Duolamp Tail Light Assembly,
Plastic Lens & Bulb fits the following
tractors: 340A, 420, 445, 445A, 501, 535,
540A, 540B, 545, 601, 701, 801, 901, 1801,
2000 3 & 4-cyl 2310, 2600, 2610, 2810, 3000,
3400, 3500, 3600, 3610, 3900, 3910, 4000 3
& 4-cyl, 4000SU, 4100, 4110, 4400, 4500,
4600SU, 4610, 6000 (1957 & up)
Replaces: 310064, C5NN13403A,
D2NN13403A NOTE: Powder coat.
Restoration quality. For 12-v bulb order
ABC345.
Tail Light Lens fits: Some NAA, 501, 600,
700, 800, 900, 2000, 2600, 2310, 3000, 3600,
3610, 3910, 4000, 4000 SU, 4100, 4200, 4600,
4600 SU, 4610, 5000, 5100, 5200, 5600, 5610,
6000, 6610, 7000, 7100, 7200, 7600, 7610;
Industrials: 231, 335, 340, 445, 531, 540,
3400, 3500, 4400, 4500
Replaces: FDV13450A
(4" O.D., 3-1/8" c.c. bolt holes) USA made
NOTE: Red plastic.
Order #
Price
ABC544
$17.15
12-volt Fender & Cab Warning Light
w/ 2 amber lenses, double contact bulb &
black die cast base
Serviceable for 2000 3-cyl. thru TW30
(All using round warning light)
Replaces: C5NN12N359E, D4NN13N359A,
D6NN13N359B, D9NN13N359AA
(4" dia.)
ABC548
$9.95
12-volt Round Tail Light Assembly
w/ License Lamp Window, red lens
& black ABS base
Serviceable for Ford models
(4" dia.; 2 stud mount, 1-7/8" c.c. studs)
ABC1439 $3.45
ABC546
$26.50
Description / Application
6-volt Bulb only
(For ABC544, ABC548)
12-volt Fender & Cab Warning Light
w/ 1 amber lens, 1 red lens, amber side
marker, single contact bulb & black ABS
base
Serviceable for Ford models (All using
rectangular warning lights)
ABC1243 $4.95
Amber Lens only
(For ABC546)
FDS320
$125.95
FDS323
$125.95
FDS325
(6-volt)
$89.95
FDS327
(12-volt)
$89.95
6-volt Work Light Assembly w/ Frosted
Glass Lens & On / Off Switch
Fits: 9N, 2N, 8N (1947-51)
Replaces: 8N15500E
(4-1/2" O.D.)
NOTE: Restoration quality.
6-volt Work Light Assembly w/ Dimpled
Glass Lens & On / Off Switch
Fits: 8N, NAA, Jubilee, 600, 700, 800, 900
(1951-57), Replaces: 8N15500L
(4-1/2" O.D.)
NOTE: Restoration quality.
Work Light Assembly w/ Sealed Beam
Lens & On / Off Switch
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000 4-cyl., 4000 4-cyl. series
(thru 64), Replaces: 8N15500
(5-1/4" O.D. housing)
NOTE: Uses 4-1/2" O.D. sealed beam
bulb. For replacement bulb use ABC352
6-volt, ABC353 12-volt). Restoration
quality
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Tail, work lights, parts cont...
Order #
Price
ABC3154 $34.95
MFS118
$11.95
$9.95
EACH
FDS170
$47.25
NEW! 'Hobbs' Rear Combo Light
Fits: Tractors & equipment using rear
12-Volt combo light w/ stud post out back
& dash mounted light switch USA made
NOTE: New old stock, paint is
blemished.
Light Bulb Retainer (Holder) Springs
(For Work Lights)
Fits: Ford models
NOTE: Sold in a package of 4.
Tail Light Bracket fits: 9N, 2N, 8N, NAA,
Jubilee, 501, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl. series. Replaces: 8N13423
NOTE: Ford grey; Mounts to FDS170. 1
per bracket; Sold individually. RH & LH
are the same.
Price
Description / Application
FDS010
Order #
$20.50
2-Piece Hood Emblem (Economy)
Fits: 9N, 2N
Replaces: 9N16600
(Oval piece: 3-1/4" W x 1-7/8" H Rectangle
piece: 2-1/2" W x 1" H)
NOTE: Painted, pot metal.
FDS009
$17.50
Hood Emblem (Economy)
Fits: 8N
Replaces: 8N16600B
(4-5/8" W x 2" H)
NOTE: Painted, pot metal.
FDS009B $32.50
FDS011
$46.50
FDS012
$46.50
FDS013
$46.50
FDS014
$46.50
FDS312
$46.50
FDS235
$74.95
Light components
Order #
Price
Description
The light components below fits IHS647, ABC3154:
ABC3028
$12.50
NEW! Hobbs Rubber Light Bezel
NOTE: See insert A.
ABC527
$5.95
Concaved Mounting Washer
ABC352
$7.65
6-volt Sealed Lo-Beam Bulb 4511
ABC353
$7.50
12-volt Sealed Lo-Beam Bulb 4411
ABC462
$16.50
6-volt Sealed Hi-Beam Bulb 4510
ABC460
$16.50
12-volt Sealed Hi-Beam Bulb 4410
The light components below fit FDS172, FDS173, FDS444:
FDS454
$14.95
Glass Tail Light Lens USA made
FDS454GK
$9.95
Tail Light Lens Gasket Set USA made
FDS456
$14.95
Stainless Steel Bezel
FDS458
$13.25
Tail Light License Light Window Glass Lens
FDS458GK
$4.95
Gasket only (For FDS458)
ABC1439
$3.45
6-volt Bulb (For FDS172, FDS173)
ABC344
$1.80
6-volt Bulb (For FDS444 and factory lights)
ABC345
$1.80
12-volt Bulb (For FDS444 & factory lights)
The light components below fit FDS446, FDS448, FDS442:
FDS452
$14.95
Plastic Tail Light Lens
ABC344
$1.80
6-volt Bulb
ABC345
$1.80
12-volt Bulb
Hood Emblem
Fits: 8N
Replaces: 8N16600B
(4-5/8" W x 2" H)
NOTE: Die cast, chrome w/ red
background. Beautiful!
Hood Emblem
Fits: Jubilee, Golden Jubilee
(Measures 5-3/4" across)
NOTE: Die cast, chrome plated w/ a
baked-on painted finish in original colors!
Hood Emblem
Fits: NAA
(Measures 5-3/4" across)
NOTE: Die cast, chrome plated w/ a
baked-on painted finish in original colors!
Hood Emblem
Fits: 600, 620, 630, 640, 650, 660
(Measures 5-3/4" across)
NOTE: Die cast, chrome plated w/ a
baked-on painted finish in original colors!
Hood Emblem
Fits: 800, 820, 840, 850, 860
(Measures 5-3/4" across)
NOTE: Die cast, chrome plated w/ a
baked-on painted finish in original colors.
Hood Emblem
Fits: 900, 950, 960
(Measures 5-3/4" across)
NOTE: Die cast, chrome plated w/ a
baked-on painted finish in original colors!
Hood Emblem
Fits: 501, 541, 601, 611, 621, 631, 641, 651,
661, 671, 681, 701, 741, 771 (1958-62)
Replaces: 311231
(5-1/2" across) USA made
NOTE: Metal backed.
Emblems continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
167
Electrical / Chassis parts
Fender Light Brackets, Pair
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: 9N13470, 9N13471
NOTE: Ford grey. Sold as pair.
NOTE: Emblems include clips / screws.
Ford
FDS171
Description / Application
Emblems - Licensed by Ford
Emblems - Licensed by Ford cont...
Front bumper, part
FDS031
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800,
2000, 3000, (4000 SU w/ I-Beam Axle)
Replaces: 33806S34, 351505S8, 354369S8
NOTE: Emblems include clips / screws.
Order #
Price
FDS307
$76.00
Chassis parts
Ford
FDS2475
FDS2477
FDS409
$88.75
$6.50
Description / Application
Hood Emblem
Fits: 801, 811, 821, 841, 851, 861, 871, 881,
901, 941, 951, 961, 971, 981 (1958-62)
Replaces: 311232
(Measures 5-7/8" across) USA made
NOTE: Metal backed.
FDS478
Description
Hood Emblem
Fits the following w/ cast iron front nose:
1801, 1811, 1821, 1841, 1871, 1881, 2030,
4030, 4040, 4130, 4140 4-cyl. industrial
(1958 - 62), Replaces: C0NN16600E,
C0NN16600F, 312718
(5-7/8" O.D.) USA made
NOTE: Metal backed. Does not include
FDS2477 bracket.
Hood Emblem Bracket
Fits the following w/ cast iron front nose:
1801, 1811, 1821, 1841, 1871, 1881, 4040, 4140
4-cyl. (1958 - 64), Replaces: 312741
(6" o/a length, 1-1/4" wide)
Order # Bumper Bolt Kit.....................................................FDS478............ $13.75
NOTE: 5/8" x 18" x 4", Grade 8. Zinc plated.
Front grilles, parts
Order #
Price
FDS006
$67.50
FDS1894
ABC374
$66.95
$0.25
Front Grille Emblem
Fits: 6000; Serviceable for 6000 Commander
Replaces: CONN16600A; Serviceable for
C5NN3A515A (10 x 32 thread, 2.475" tall,
3.675" length of widest point) USA made
Emblem Push Clip (For Ford emblems)
(Center hole dia. = 0.180" & will expand to
0.300") NOTE: Push Clips are included w/
the listed emblems.
FDS205
$350.00
FDS204
$350.00
FDS198
$100.75
Serviceable for 9N, 2N, 8N
(All w/out bumpers)
Replaces: 9N17040, 2N17040A
(13-1/4" to first bend, 5/8" dia.)
FDS091
IHS401
Description
Order # Price
Starter Hand Crank w/ Pin...................................IHS543............. $42.15
& w/ Spinner USA made
Starter Hand Crank w/ Pin...................................IHS401............. $28.50
& w/out Spinner USA made
168
Front Grille
Fits: Late 9N, 2N (Late 1941-47)
Replaces: 9N8206D
(Tear drop shaped bars)
USA made NOTE: Restoration quality,
Made from original tooling
Front Grille
Fits: 8N (1947-52), Replaces: 8N8204
(Tear drop shaped bars)
USA made NOTE: Powder coat.
Restoration quality. Made from original
tooling.
Front Grille
Fits: 8N (1947-52)
NOTE: Original style. Bare steel. Round
bars.
Starter hand cranks
IHS543
Description / Application
Economy Front Grille
Fits: 9N, 2N, 8N
Replaces: 8N8204 Not like original
NOTE: For best results fit to tractor
before painting.
$35.75
Hood Emblem
Fits: Fordson Major; Dexta up to SN: 916550
when using oval emblem
Replaces: E1ADKN8212C
NOTE: Metal.
Price
Front Bumper (4 Bar).............................................FDS031............ $114.95
NOTE: IMPROVED W/ CORRECT FIT! Heavy duty, red oxide
primer. USA made
$235.50
Front Grille w/ Rubber Bumpers &
Hardware fits: Jubilee, NAA, 600, 800,
Early 2000 series (1953-62)
Replaces: NCA8200A USA made
NOTE: Steel. E-coated black. Hand crank
hole is round. Restoration quality.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Front grilles, parts cont...
Order #
Price
FDS1090
$189.95
FDS345
$4.00
FDS091H $7.75
Description / Application
Economy Front Grille
Fits: Jubilee, NAA, 600, 800, Early 2000
series (1953-62), Replaces: NCA8200A
NOTE: Steel; primed gray. Hand crank
hole is elongated.
4-Piece Grille Bumper Kit
Fits: Jubilee, NAA, 501, 600, 700, 800, 900,
Early 2000 series (1953-62)
Replaces: NAA88227B USA made
Grille Mounting Stud fits: NAA, Jubilee
(1953-54), Replaces: NAA88219A
(1/4" - 20) NOTE: 2 used per tractor;
Sold individually.
Grille Mounting Stud fits: 600, 700, 800,
900 (1954-62), Replaces: NAA88219B
(5/16" - 18) NOTE: 2 used per tractor;
Sold individually.
FDS356
$334.45
Upper Grille Assembly
Fits: 801, 811, 821, 841, 851, 861, 871, 881,
901, 941, 951, 961, 971, 981, 4030, 4031
(1958-62), Replaces: 310984 (outer shell),
310982 (inner screen), 311591 (grille
mounting stud)
FDS352
$177.85
Price
$27.50
FDS359
$32.50
FDS360
$6.10
Push-In Stud & Knob (For FDS359 Bottom
Grille) Fits: 2000, 3000, 4000, 5000, 7000
(All April 1968 & up)
Replaces: C9NN8B151B, 9828014
NOTE: 2 used per bottom grille;
Sold individually.
FDS059
$59.95
1-Piece Front Grille Screen Assembly
w/ Plastic Outer Frame & Steel Screen
Fits: 2600, 3600, 4100, 4600, 4600SU, 5600,
6600, 7600; Will also fit 2000, 3000, 4000 if
using 1-piece style grille housing
Replaces: D5NN8200A (18-3/8" top width,
17-1/2" bottom width, 23-3/4" tall)
FDS311
$3.75
EACH
Outer Shell only
Fits: Same as FDS356
Replaces: 310984
FDS354
$193.95
$7.50
Grille Mounting Stud
Fits: 801, 901, 2000 4-cyl., 4000 4-cyl. series
(1958-62), Replaces: 311591, D4NN8N213A
(5/16" - 18 UNC) NOTE: 4 used per grille;
Sold individually.
FDS190
$164.50
Bottom Grille Section
Fits: 801, 811, 821, 841, 851, 861, 871, 881,
4000, 4030, 4031 4-cyl. (1958-62)
Replaces: 310032 USA made
NOTE: Metal; E-coated black.
FDS357
Top Grille Section w/ Red "Ford" Letters
Fits: 2000, 3000, 4000, 5000, 7000 (All April
1968 & up), Replaces: C9NN8A163AG
NOTE: Grey plastic. Replaces the metal
grille used April 1968 thru January 1971
& the plastic grille used February 1971
& up.
Bottom Grille Section w/out Headlight
Holes fits: Same as FDS358
Replaces: D1NN8151A
NOTE: Grey / blue plastic.
Front Grille Screen Fastening Spring
To secure bug screen to Ford grilles
NOTE: 4 required; Sold individually.
Nosecone
Inner Screen only
Fits: Same as FDS356
Replaces: 310982
FDS348
Description / Application
Fits: NAA, Jubilee, 501, 600, 700, 800, 900
(1953-62), Replaces: NCA16613A
Description
Order # Price
Nosecone (Hood Front Top)................................. FDS127..........$103.15
NOTE: Not restoration quality. For best results fit to tractor before
painting.
Hood, parts
Order #
FDS069
$131.95
2-Piece Front Grille (Upper & Lower)
Fits: 2000, 3000, 4000, 5000 (All 1965 to
March 1968), Replaces: C5NN8A163A,
C5NN8202AA
NOTE: Metal.
Price
$326.00
Description / Application
Hood w/ Battery Door & Hinge,
Latch Kit, Knob (w/out Dog Legs)
Fits: 8N, Replaces: 8N16612,
9N16938C NOTE: Not restoration
quality. Does not have Ford script.
Will fit Ford 9N & 2N but models
did not originally have side air
cleaner openings. For best results
fit to tractor before painting
Hood, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
169
Chassis parts
$6.95
Order #
FDS358
Ford
FDS347
Front grilles, parts cont...
Chassis parts
Ford
Hood, parts cont...
Order #
Price
FDS083
(RH)
$79.95
FDS084
(LH)
$79.95
FDS083
FDS084
ABC2277
$2.95
ABC2257
$5.99
FDS382
FDS385
FDS344
$7.20
$7.20
$59.95
FDS125
(RH)
$106.95
FDS130
(LH)
$106.95
FDS125
FDS1759
170
Hood, parts cont...
Description / Application
Side Panel (Dog Leg)
Fits: 2N, 8N
REP083 Replaces: 8N16618A
FDS084 Replaces: 8N16619A
Upper Side Panel (Hood Dog Leg) Bolt Kit
Fits: 2N, 8N, 9N
Replaces: 20311S7 (bolt), 34806S (lock),
33798S (nut) NOTE: Includes 4 fine
thread bolts, nuts, lock washers.
Hood Side Panel (Hood Dog Leg) to Axle
Support Bolt Kit fits: 2N, 8N, 9N
(All using single bolt dog legs)
Replaces: 350782S8 (7/16" - 20 NF bolts)
NOTE: Includes 2 bolts, flat & lock
washers, square nuts.
4-Piece Hood Bolt Kit
Fits: 8N, Replaces: 355494S
(3/8" x 24) USA made NOTE: Secures
hood to dash using (4) bolts. Can also
be used to bolt air cleaner to battery tray
using (2) bolts.
6-Piece Hood Dash Screw Kit fits: NAA,
Jubilee, Golden Jubilee, 501, 600, 700,
800, 900, 2000 4-cyl., 4000 4-cyl. (1953-64),
Replaces: 354425S (5/16" x 24 Phillips
head) USA made NOTE: Secures rear of
hood to dash panel using (6) screws.
Hood Ornament fits: 2000, 2030, 2031,
2110, 2111, 2130, 2131, 4000, 4030, 4031,
4040, 4110, 4120, 4121, 4130, 4131, 4140 (All
4-cyl.) (1962-64), Replaces: C3NN16B748A
NOTE: Metal; chrome plated.
Front Side Panel Dog
Fits: NAA, Jubilee, 600, 800, Early 2000
4-cyl. series (1953-62)
FDS125 Replaces: NCA16652A
FDS130 Replaces: NCA16653A
Order #
Price
FDS144
$38.95
FDS380
$8.80
FDS279
$24.30
Battery Door Hinge
Fits: 9N w/ steel hood, 2N, 8N
Replaces: 9N16689
USA made
FDS008
$15.00
Chrome Battery Door Handle w/ Stud,
Nut & Latch
Fits: 9N, 2N, 8N
Replaces: 9N16625
FDS007
$12.50
Air Cleaner Grille Door w/ Thumb Screw
Fits: 8N, Replaces: 8N9661
NOTE: Fits outside right rear hood.
Will also fit Ford 9N & 2N if they are
converted to an 8N hood.
FDS085
$14.50
FDS075
$22.95
FDS075S
$4.95
Radiator to Hood Side Panel Bumper
Fits: NAA thru 4000 4-cyl. (1953-64)
Replaces: NAA88131B
(2.026" o/a length, 1.035" thick, 1.285"
wide) USA made NOTE: 2 used per
tractor; Sold individually. Must be glued
to panels.
Battery Door w/ Latch & Hinge Assembly
Fits: 9N w/ steel hood, 2N, 8N
Replaces: 9N16938C
Set of (4) Rubber Bumpers
Fits: 9N w/ steel hood, 2N, 8N
Replaces: 11A-16758A
Air Cleaner Funnel Assembly
Fits: 8N
Replaces: 8N9684
Air Cleaner Grille Door w/ Screen &
Thumb Screw fits: NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. series
(1953-64), Replaces: NAA9661B (door),
NAA9669A (screen)
Screen only
(For FDS075)
FDS377
$2.75
Center Door Rubber Bumper
Fits: NAA, Jubilee, 600, 700, 800, 900, 2000
4 cyl, 4000 4 cyl; Fits: LPG: 501, 601, 701,
901 (1953-1964), Replaces: 354177S
NOTE: 4 to 6 required per tractor;
Sold individually.
FDS491
$1.00
Hood / Grille Rubber Bumper fits: 2000 &
up, 1965 & up, Replaces: C5NN16N655A
(.990" o/a length, .500" head dia.)
NOTE: 20 required per tractor;
Sold individually.
FDS440
$14.85
Hood Latch Spring fits: NAA, Jubilee, 501,
600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl.
series (1953-64) except LP
Replaces: NAA16925B NOTE: 2 required
per tractor; Sold individually.
FDS130
$5.95
Description / Application
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Air cleaner assembly, parts
Order #
FDS210
FDS382
Price
$129.95
$7.20
$25.50
ABC422
$12.95
Air Cleaner Assembly w/ Clip Assy.,
Gasket & Clip-Held Cap
Fits: NAA, Jubilee, 600 (1953-57)
Replaces: EAE9600D & 312917
(7-1/4" c.c. bolt pattern)
4-Piece Bolt Kit fits: 8N
Replaces: 355494S (3/8" x 24) USA made
NOTE: Bolts air cleaner to battery tray
(only 2 bolts are required).
Air Cleaner Oil Bath Filter Element
Fits: Ford models (3" wide x 78" long)
NOTE: Replaces: the mesh in existing
air cleaners. Sold by the bag (Normal
utility air cleaners will use 2 bags).
FDS186
$4.95
FDS191
$6.50
Air Cleaner Oil Cup (Clip-Held)
Fits: Some 8N, NAA, Jubilee, 600, 700,
800, 900 (thru 57), Replaces: 8N9658
(5" O.D. at lip, 3-1/8" high) NOTE: Check
measurement before ordering.
JDS541
$12.15
FDS019
$18.95
FDS309
$29.95
FDS1481
$29.95
FDS1540
$29.95
Air Cleaner Tube
Fits following w/ 172" gas, LP: 801, 811,
821, 841, 851, 861, 871, 881, 901, 941, 951,
961, 971, 981, 1801, 1811, 1821, 1841, 1871,
1881, (4000 4-cyl.), 4030, 4040, 4121, 4130,
4131, 4140 (1958 & up), Replaces: 311092,
86531351 (2" O.D.)
FDS260
$4.00
EACH
Air Cleaner Hose
Fits: 9N, 2N, 8N, F40, NAA, Jubilee, 501,
541, 600, 601, 611, 621, 631, 641, 651, 661,
671, 681, 700, 741, 771 & some 800, 900
series gas (1939-57), Replaces: 9N9652
(1-1/2" I.D., 2-7/16" long) NOTE: 2
required per tractor; Sold individually.
FDS261
$5.10
EACH
FDS258
$3.60
EACH
Air Cleaner Spring Clip
Fits: 8N, NAA, Jubilee, 600, 700, 800, 900
(thru 57), Replaces: 9N9678
Air Cleaner Gasket
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900 (thru 62), Replaces: 9N9623B
USA made
Clamp-Held
FDS034
FDS033
FDS081
$14.95
$9.95
Air Cleaner Oil Cup (Clamp-Held)
Fits: Some 9N, 2N, 501, 600, 700, 800, 900
Replaces: 311507 (4-3/4" O.D. at lip,
4-15/32" I.D., 3" high) NOTE: Check
measurement before ordering.
Air Cleaner Inner Oil Cup
Fits: Some 9N, 2N, 501, 600, 700, 800, 900
Replaces: 311506
$10.30
Air Cleaner Cup Clamp
Fits: 9N, 2N, 501, 600, 700, 800, 900
Replaces: 311508
Description / Application
Air Cleaner Oil Cup
Fits: 801, 811, 821, 841, 851, 861, 871, 881,
901, 941, 951, 961, 971, 981 (1958-62 w/
172" gas), Replaces: 311510
(5-3/8" I.D.)
Air Cleaner Oil Cup Clamp
Fits: 801, 811, 821, 841, 851, 861, 871, 881,
901, 941, 951, 961, 971, 981 (1958-62 w/
172" gas), Replaces: 311511
Air Cleaner Tube
Fits: 9N, 2N, 8N, Replaces: 9N18215C
(1-11/16" O.D.)
NOTE: Chrome plated.
Air Cleaner Tube
Fits: NAA, NAB, Jubilee, 501, 541, 600,
601, 611, 620, 621, 630, 631, 640, 641, 650,
651, 661, 671, 681 gas, LP (1953 & up)
Replaces: EAE9620B
(1-5/8" O.D.)
Air Cleaner Tube
Fits: 700, 701, 740, 741, 771, 800, 820, 840,
850, 860, 900, 950, 960 gas (1955 & up)
Replaces: EAF9621B, 311112
(1-5/8" O.D. pipe)
Air Cleaner Hose
Fits: 801, 901 (1957-64); 1801, 2000, 4000
4-cyl. series gas, Replaces: 311107
(2" I.D., 2-1/4" long) NOTE: 2 required
per tractor; Sold individually.
Clamp (Air cleaner to carb pipe)
(For 1-3/4" to 2" O.D. Air Cleaner Hose)
Fits: 9N, 2N, 8N, NAA, Jubilee, 501,
600, 700, some 800, 900 series (1939-57),
Replaces: 9N9653 NOTE: 4 required per
tractor; Sold individually.
Air cleaner assembly, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
171
Chassis parts
$22.90
Price
$27.50
Air Cleaner Cap
Fits: 9N, 2N w/ vertical air intake thru
hood (4-1/4" body dia.; 1-3/4" I.D.)
NOTE: Fits outside of pipe
Clip-Held
FDS185
Order #
JDS540
Ford
IHS390
Description / Application
Air cleaner assembly, parts cont...
Air cleaner assembly, parts cont...
Order #
ABC2443
Chassis parts
Ford
ABC1765
Price
$22.50
$14.95
Pre-cleaner caps, parts cont...
Description / Application
NEW! Dust Unloader Valve
(Vacuator Valve) (For Dry Air Cleaners)
Fits: 2000, 3000, 4000 gas, diesel;
2600 thru 4610 gas only (1965 & up)
Replaces: C5NE9C673A, 270228
(1" I.D.)
Dust Unloader Valve (Vacuator Valve)
(For Dry Air Cleaners) fits: 2310 thru
TW20 and Industrials using 3" unloader
valve, Replaces: D2NN9C673B,
F0NN9C673AA, 81870839
Order #
Price
ABC470
$39.95
Pre-Cleaner Cap Assembly
Fits: Ford models w/ 3" I.D. base & 7" bowl
(3" I.D. base)
ABC510
$64.60
ABC554
$42.95
Pre-Cleaner Cover w/ Brass Knurled Nut
Fits: Some 501, 601, 701, 801, 901, 1801,
2000, 3000, 4000 series gas, diesel, 4400,
5000 gas (All w/ 5-1/2" bowl)
Replaces: B9NN9A660A, B9NN9A664A,
73223 (5-7/16" I.D.) USA made
NOTE: Aluminum
ABC484
$24.95
Pre-Cleaner Bowl (5-1/2" dia.)
Fits: 501, 601, 701, 801, 901, 1801, 2000,
3000, 3400, 4000, 4400 gas, diesel, 5000 gas
Replaces: B9NN9A663A
NOTE: Check measurements before
ordering. Clear plastic.
Pre-cleaner caps, parts
Order #
Price
FDS361
$19.95
FDS362
ABC1824
$19.95
Description / Application
Pre-Cleaner Cap fits: 801 thru 981 gas
(1958-62) & the following gas w/ dry type
air cleaner (1965 & up): Some 2000, 3000,
4000 series, 2600, 3600, 4600, 231, 335, 515,
531, 532; Fits the following diesels w/ oil
bath application: Some 2000, 3000, 4000
series, 231, 233 w/ 2" Intake, Replaces:
C5NN9A660B (6-1/2" o/a height)
NOTE: Metal; powder coat black. Check
intake pipe size before ordering.
Pre-Cleaner Cap fits: Some 445, 4000, 4400,
4500, 4600, 5000, 5100, 5200, 5600, 6600,
7000, 7100, 7200, 7600 w/ 2-1/4" Intake
Replaces: C5NN9A660A
(6-3/4" o/a height)
NOTE: Metal; powder coat black.
ABC383
JDS559
$24.95
Pre-Cleaner Cover w/ Brass Nut
(For 7" bowl)
Fits: Some 2610 - 6810, Replaces: 73534
(7" dia.)
NOTE: Metal.
ABC338
$13.95
Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet
Fits: Some 2610 thru 6810
Replaces: C0NN9A663A, 80073533, 73533,
Donaldson PO20227
NOTE: Clear plastic.
ABC338 dimensions: Bowl O.D. at top - 7"; Cone I.D. at top - 3-1/2";
Bowl side height - 3"; Overall height - 4-1/8"
ABC339
$16.95
$74.95
Pre-Cleaner Cap Assembly
Fits: Ford models w/ 2-1/4" I.D. base
& 7" bowl, Replaces: 86620243
USA made
Pre-Cleaner Cap Assembly
Fits: Ford models w/ 4" I.D. base
& 10-1/2" bowl
ABC484 dimensions: Bowl O.D. at top = 5-1/2";
Bowl O.D. at bottom = 5"; Cone I.D. at top=2-7/16"; bowl side
height=2-7/16"; overall height=3-9/16"
$49.95
Pre-Cleaner Cap Assembly
Fits: Some 801 thru 1881 series, 2000 thru
6000 series w/ 2" I.D. base & 5-1/2" bowl
dia., Replaces: B9NN9A660A, 86555327
USA made
Description / Application
Pre-Cleaner Bowl (10-1/2" dia.)
For 3" to 4" inlet
Fits: Ford models, Replaces: C9NN9A663A
NOTE: Clear plastic.
ABC339 dimensions: Bowl O.D. at top - 10-1/2"; Cone I.D. at top 5-9/16"; Bowl side height - 3"; Overall height - 4"
Fuel tanks, parts
ABC512
$74.95
Order #
Pre-Cleaner Cap Assembly
Fits: Ford models w/ 2-1/2" I.D. base
& 7" bowl
USA made
172
FDS176
Price
Description / Application
$175.00
Fuel Tank (Steel)
Fits: 9N, 2N, 8N
Replaces: 9N9002
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Fuel tanks, parts cont...
Order #
FDS178
ABC127
Description / Application
Order #
$199.99 Fuel Tank (Steel) fits: NAA, Jubilee;
Will also fit 600, 800 series gas only
(1953-57), Replaces: NAA9002E
NOTE: Will not work for tractors
w/ fuel sending units; Depending
on application, tank may be smaller
capacity than original.
Fuel Shut Off Valve w/ O-Ring at Fuel
Tank fits: 501, 600, 601, 700, 701, 2000 4-cyl.
gas, diesel (1954-64); 800, 801, 900, 901 up
to SN: 126524 w/ 1/4" fuel line gas, diesel
(1954-60); 1801, 4000 Both 4-cyl. diesel
(1958-64), Replaces: 311292 NOTE: Use
caution when threading fuel line in, as
it is not returnable if threads have been
cross threaded.
$35.75
Fuel caps, parts
Order #
Price
Description / Application
FDS167
$8.95
Fuel Cap (Non-Vented) w/ Gasket
Fits: 9N, 2N, 8N
Replaces: 9N9030
NOTE: Original appearance.
MHS043
$9.95
Fuel Cap (Vented) w/ MHS043GK
Gasket fits: 9N thru TW35 (1939-90
Except 2600, 2610)
Replaces: C5NN9030B, E7NN9030AA
(2-7/8" O.D.)
Underside view
MHS043GK $1.50
ABC123
ABC039
Order # Price
Fuel Tank Screen...................................................... ABC1315........ $8.50
NOTE: Slides on top of sediment bowl inlet to prevent dirt from
the fuel tank bottom from entering the sediment bowl assembly.
ABC319
ABC563
ABC038 components
The following parts (Sold separately) will fit ABC038 Sediment
Bowl Assy:
Order #
Price
Description
ABC123 $2.90
Glass Bowl, Replaces: 9N9162
(2" O.D., 1.280" L) NOTE: Also fits 600, 700,
800, 900 thru 1957.
ABC039 $1.45
Gasket, Replaces: NAA9160A
(2" O.D.) USA made NOTE: Also fits 600,
700, 800, 900 thru 1957.
ABC319 $6.20
Screen (Square Hole) (Pack of 5)
ABC563 $4.95
Bail Assembly w/ Nut, Replaces: 2N9166
USA made NOTE: Also fits 600, 700, 800,
900 thru 1957.
Order #
Price
Description / Application
ABC040
$29.95
Sediment Bowl Assembly w/ 3/8" Bolt Hole
Fits: 501, 600, 601, 700, 701, 2000 4-cyl. gas
(1954-64); 800, 801, 900, 901, 1801 up to SN:
126524 w/ 1/4" fuel line (1954-60)
Replaces: 311272 NOTE: Use caution
when threading fuel line in, as it is not
returnable if threads have been cross
threaded.
$32.55
Sediment Bowl Assembly w/ 7/16" Bolt
Hole fits: 800, 801, 900, 901, 1801, 4000 series,
6000 gas (1960-64) (All w/ gas engine SN:
126525 & up), Replaces: C0NN9155A, 9285A
NOTE: Use caution when threading fuel
line in, as it is not returnable if threads
have been cross threaded.
ABC106
7/16"
Gasket only (For MHS043)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
Fits: Most Ford models w/ stem style
sediment bowl (.375" screen O.D., .216" pipe
O.D., 2.530" o/a length) USA made
Description
Sediment Bowl Assembly
Fits: 9N, 2N, 8N, NAA, Jubilee
Replaces: 2N9155B, NAA9155B
(3/8" pipe inlet, 1/4" tube outlet)
3/8"
Fuel tank screen
Description / Application
Chassis parts
Fuel Shut Off Valve fits the following
1965 - 96 gas, diesel: 2000 3-cyl. thru 7810;
Industrials: 3400 thru 755B
Replaces: E2NN9N200A, E2NN9N024AA,
E0NN9N024AA, 83935915 (1/2" pipe inlet,
5/16" tube outlet) NOTE: Metal w/ brass
valve & plastic filter screen. Use caution
when threading fuel line in, as it is not
returnable if threads have been cross
threaded.
$14.85
Price
ABC038 $20.75
ABC294
ABC346
FDS1780
FDS1785
FDS2616
FDS2620
ABC040 / ABC106 components
The following parts (Sold separately) will fit ABC040, ABC106
Sediment Bowl Assys:
Order #
Price
ABC294
$1.20
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Ford
FDS483
Price
Sediment bowl assemblies, parts
Description
Gasket, Replaces: 311275 (1-9/16" O.D.)
USA made NOTE: 1958 & up.
Sediment bowl assemblies, parts continue on next page
173
Sediment bowl assemblies, parts cont...
Order #
Price
Fuel lines cont...
Description / Application
ABC040 / ABC106 components cont...
Order #
Price
FDS1603
$4.95
Description / Application
FDS487
$29.95
FDS1544
$24.95
Fuel Line fits following gas only w/ 134"
engine 1954-64: 600 series, 601 series, 700,
740, 2000 (4 cyl.), 2111, 2030, 2031, 2120,
2130, 2131, Replaces: NCA9282B
FDS1549
$48.95
Fuel Line fits: Some 801, 811, 821, 841, 851,
861, 871, 881, 901, 941, 951, 961, 971, 981,
1801, 1811, 1821, 1841, 1871, 1881 w/ 172"
gas engine (SN: 11977 - 126524), Replaces:
310918 (1/4" line and 15-1/2" long)
Rubber Bumper Anti-Rattler fits: 9N, 2N,
8N (1939-52), Replaces: 9N9121A, 9N9121
(0.985" O.D., 0.500" tall) NOTE: Rubber
finish. Fits between fuel line & tank.
The following parts (Sold separately) will fit ABC040, ABC106
Chassis parts
Ford
Sediment Bowl Assys:
ABC346
$4.65
Filter Screen & Gasket Set
FDS1780
$1.49
Fuel Filter Valve Stem to Carb Body Gasket
(For ABC040), Replaces: NCA99180B
(0.339" I.D. x 0.579" O.D. x 0.062" thick)
NOTE: 2 used per tractor;
Sold individually.
FDS1785
$1.89
Fuel Filter Valve Stem to Carb Body Gasket
(For ABC106), Replaces: NCA99180A
(0.443" I.D. x 0.600" O.D. x 0.047" thick)
NOTE: 2 used per tractor;
Sold individually.
FDS2616
$16.50
Sediment Bowl Retaining Bolt (3/8")
(For ABC040), Replaces: 86531362
USA made
FDS2620
$24.50
Sediment Bowl Retaining Bolt (7/16")
(For ABC106), Replaces: C0NN9A349B
USA made
Fuel Line Assembly
Fits: NAA, Jubilee (1953-54)
Replaces: NCA9282C
Throttle parts
Fuel filters
Order #
Price
ABC490
$6.45
ABC1423
ABC1421
$29.95
$5.25
EACH
Description / Application
In Line Fuel Filter w/ Hose & Clamps
Fits: Ford models using 3/8" fuel line
NOTE: Must splice fuel line to use. Will
help to keep rust & dirt out of carburetor.
Diesel Single Fuel Filter Assembly
w/ Glass Bowl fits: 2000 3-cyl. thru 7700
Industrials: 230A thru 755A
Replaces: C5NE9165C, C7NN9162B,
D9NN9165BA, 83937061
((4) 1/2" x 20 UNF ports) NOTE: Use
caution when threading fuel line in, as
it is not returnable if threads have been
cross threaded.
Fuel Filter Element w/ Seals
(For Cav/Simms fuel filters)
Fits: 2000 3-cyl. thru 9600 (All w/
2.85" tall element), Replaces: 83937061,
D8NN9N074AA, Cav # 7111/296
(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)
NOTE: Sold individually.
Order #
Price
FDS378
$32.95
FDS151
$11.95
FDS411
$2.95
FDS413
$46.45
FDS1610
$14.95
FDS332
$2.95
Throttle Rod Grommet
Fits: NAA, Jubilee, 501, 600, 700, 800, 900;
2000, 3000, 4000, 5000 thru 7910
Replaces: 353873S
FDS155
$14.95
Throttle Control Linkage
Fits: 9N, 2N (1939-47)
Replaces: 9N9810
(2-1/2")
Fuel lines
Order #
FDS485
174
Price
$18.95
Description / Application
Fuel Line Assembly
Fits: 9N, 2N, 8N (1939-52)
Replaces: 9N9282A
Description / Application
Quadrant Throttle Plate
Fits: 9N, 2N (1939-47)
Replaces: 9N9820
Quadrant Throttle Plate
Fits: 8N
Replaces: 8N9889A
3-Piece Screw Kit (For Quadrant Throttle
Plate) fits: 8N
Replaces: 28319S7
(10 - 24 x 3/8") USA made
Lever (For Throttle)
Fits: 8N
Replaces: 8N9805
Throttle Bellcrank Friction Disc Spring
Washer fits: NAA, 501, 600, 700, 800, 900,
2000, 4000 4-cyl. gas, LP (1953 - 64)
Replaces: NAA99778B
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Throttle parts cont...
Clutch kits, parts cont...
Order #
Price
FDS265
$20.60
Throttle Control Linkage
(Throttle shaft to governor)
Fits: 9N, 2N (1939-47)
Replaces: 9N9815
(10-1/4")
FDS156
$18.90
Throttle Control Linkage
(Governor to carburetor control)
Fits: 9N, 2N, 8N (1939-52)
Replaces: 9N9818A
(7")
FDS158
$27.45
Description / Application
Throttle Control Linkage
(Throttle to governor control)
Fits: 8N (1947-52)
Replaces: 8N9815
(23-3/8")
Throttle Control Rod
Fits: NAA thru 4000 4-cyl. gas (1953-1964)
Replaces: NAA9815F
(4-1/8" o/a length)
FDS2007
$14.95
Throttle Control Rod (Governor to
Carburetor) fits: Jubilee - 4000 4-cyl. series
gas, LP (1953-64), Replaces: EAF9818C,
86552618 NOTE: Clevis is not included.
Clutch kits, parts
Order #
FDS259
Price
Description / Application
Clutch Throw Out Bearing fits the
following w/ dual clutch: 660 thru 961,
Dexta & the following w/ single or dual
clutch: 2000, 3000, 4000, 5000 thru TW35
Replaces: 86534551 (2.490" I.D., 4.060" O.D.,
0.870" wide) NOTE: Sealed bearing, no
need to grease.
ABC1895
$5.95
Clutch Release Bearing Spring fits the
following w/ 3 or 4 speed transmission:
9N, 2N, 8N, NAA, Golden Jubilee, 501, 600,
700, 800, 900, (2000 4-cyl series), (4000 4-cyl
series) (1939-64), Replaces: 9N7562
NOTE: 2 used per tractor;
Sold individually.
FDS1265
$58.50
Throw Out Bearing Carrier fits the
following w/ double clutch & 5 speed
transmission SN: 14256 & up: 660, 661, 860,
861, 960, 961, 2000, 4000 4-cyl. series (195564) (All w/ live PTO), Replaces: 311260,
86539876 (2.110" I.D.)
FDS1268
$125.00 Input Shaft Retainer fits the following w/
FDS415
$179.95 Clutch Kit fits the following w/ 10" 15
FDS1133
$479.85 Dual Clutch Kit fits: Dexta, Super Dexta,
FDS493
$99.95
ABC412
$5.65
double clutch & 5 speed transmission SN:
14256 & up: 660, 661, 860, 861, 960, 961,
2000, 4000 4-cyl series thru 1964 (All w/
live PTO), Replaces: 311261
(2.105" tube O.D., 5.120" o/a length)
spline single clutch: 501, 601, 701, 901, 2000
4-cyl., 4000 4-cyl. series (All SN: 14257
& up) (1958-64), Replaces: NDA7550B,
NDA7563 (10", 15 spline, 1" dia. spline)
NOTE: Kit includes new pressure plate,
clutch disc, throwout bearing, pilot
bearing & alignment tool. Verify spline
count.
Description / Application
$146.95 Clutch Kit fits: 9N, 2N, 8N, NAA, Jubilee,
600, 700, 800, 900 up to SN: 14257 (1939-57)
(All w/ 4 speed) (9", 10 splines)
NOTE: Kit includes new pressure plate,
clutch disc, throwout bearing, pilot
bearing & alignment tool. Does not
include pilot bushing for NAA, Jubilee.
FDS087
$36.95
Clutch Disc
Fits: 9N, 2N, 8N, 600, 700, 800, 900 up
to SN: 14257 (1939-57)
Replaces: 91A7550, NAA7550A
(9", 10 splines, spring loaded)
ABC496
$19.95
Clutch Throw-Out Bearing fits the
following w/ 4 speed single clutch: 9N,
2N, 8N, DEXTA, MAJOR, NAA, Jubilee,
541, 600, 700, 800, 900, 1801, 2000 4-cyl.,
4000 4-cyl. series (thru 64); Fits the
following 1965 & up w/11" single clutch:
2000 3-cyl 2110, 2310, 2600, 2610, 2810,
2910, 3000, 3400, 3500, 3550, 3600, 3610
3900, 3910, & 231; Fits the following made
10/1969 - 9/1971 w/11" 3 lever pressure
plate & w/out PTO: 4000 3-cyl., 4110, 4400,
4500, Replaces: 78-7580A, C0NN7580A
(2.078" I.D., 0.801" thick, 3.269" face
diameter) NOTE: Measure before
ordering.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
660, 661, 860, 861, 960, 961, 2000 4-cyl., 4000
4-cyl series (All w/ 5 speed transmission
live PTO) (1955-64), Replaces: 311435
(9" dia. dual clutch, 1-7/8" x 29 PTO spline
& 1" x 15 transmission spline)
NOTE: Kit includes new dual clutch
assembly (no core needed), pilot bearing
& throw out bearing.
Clutch Torque Limiter Disc fits: 611, 671,
681, 771, 811, 871, 881, 971, 981, 1811, 1871,
1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121,
6000 (1961 & up) (All w/ Select-o-Speed
transmission - 1959-64), Replaces: 313875,
313966, C0NN7A539B, C3NN7A539A,
E8NN7A539A (7-1/4" O.D., 20 spline,
1.080" spline I.D.)
Clutch Alignment Tool fits: 9N, 2N, 8N,
NAA, Jubilee, 541, Some 600, 700, 800, 900
(1939-57) (1-3/8" dia. spline, 10 splines,
.675" pilot dia.) NOTE: Check clutch
spline dia. before ordering.
175
Chassis parts
$19.95
Price
$19.85
Ford
FDS451
Order #
ABC2501
Transmission parts
Order #
Price
FDS1229
$48.95
Select-o-Speed Control Selector Lever
Fits the following w/ Select-o-Speed
transmission: 611, 671, 681, 771, 811, 871,
881, 971, 981, 1811, 1871, 1881, 2000 4-cyl.,
2111, 4000 4-cyl., 4121 (1959 & up)
Replaces: C0NN7202B
FDS1232
$48.95
Select-o-Speed Control Selector Cover
Fits the following w/ Select-o-Speed
transmission: 611, 671, 681, 771, 811, 871,
881, 971, 981, 1811, 1871, 1881, 2000 4-cyl.,
2111, 4000 4-cyl., 4121 (1959 & up)
Replaces: C5NN7N013A, 313936
NOTE: Fits left or right side.
Description / Application
Order #
FDS017
Price
Application
$207.20 Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000
series (All w/ 4 speed transmission thru
1964), Replaces: NDA7111C
(13" total length)
Gear shift lever, parts
Order #
FDS328
$8.95
ABC291
$1.00
Pump Base Drain Plug / Transmission
Filler Plug Gasket (For FDS328)
Replaces: 8N7011
USA made
FDS418
$12.50
Transmission & Rear End Oil Filler Plug
Fits: Some Dexta, Super Dexta, Fordson
Power Major, Fordson Super Major; All
2000 3-cyl., 2600, 3000, 3400, 3500, 3600,
4000 3-cyl., 4000SU, 4400, 4500 4600, 4600SU
(1965-81), Replaces: 957E7010 (1-5/8"
x 12 thread) NOTE: Check thread dia.
before ordering. Use ABC039 gasket sold
separately.
Ford
Chassis parts
Countershafts cont...
Transmission Drain Plug w/ Gasket
Fits: 9N, 2N, 8N, NAA, Jubilee (Also Fits as
an Oil Fill Plug on NAA - 4000 4-cyl.,
4 speed, 1939-64), Replaces: 9N7010
(2-1/2" O.D., 2"-12 UN thread)
Price
FDS410
$75.95
FDS1892
$9.95
Gear Shift Lever Spring fits the
following w/ 3 or 4 speed transmission:
9N, 2N, 8N, NAA, 501, 600, 700, 800,
900, 2000, 3000, 4000; Industrials: 340
thru 4500 w/ 4 speed torque converter
transmission, Replaces: 9N7227B
(2.210" tall, 1.768" tapers to 1.003" O.D.,
0.140" wire dia.)
ABC288
$3.25
Transmission Gear Shift Cover Plate
Gasket fits: 8N, NAA, Jubilee, 541, 600,
700, 800, 900, 1801, 2000, 3000, 3400,
3500, 4000, 4400, 4500 series w/ 4 speed
transmission (1947-70)
Replaces: D5NN7223A USA made
ABC387
$7.55
Transmission Input Shaft Seal fits: 9N, 2N,
8N, NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 3000, 3400, 3500, 4000, 4400,
4500 series (1939-70) (All w/ 3 or 4 speed
transmission), Replaces: 8N7052A
(1.375" I.D., 2.000" O.D., .337" width)
FDS253
$3.85
ABC2639
$64.95
Sherman Transmission Shift Cable w/
Knob fits: 9N, 2N, 8N using Sherman cable
shifted transmission, step up / step down
Replaces: 10B195 (3/8" - 24 NF inner ends &
1/2" - 20 NF outer end thread; 31-1/2" o/a
length)
DEC451
$9.20
FDS1451
$69.60
FDS1447
$63.95
Countershafts
Order #
Price
FDS032
$98.50
FDS016
Application
Fits: 9N, 2N w/ 3 speed transmission
Replaces: 9N7111
$148.50 Fits: NAA, Jubilee
Replaces: NAA7111C
(12-1/2" total length)
NOTE: Close out.
176
Description / Application
Gear Shift Lever w/ Knob
Fits: 8N, NAA, Jubilee, 501, 600, 700,
701, 800, 900, 1801, 2000, 3000, 3400,
3500, 4000, 4400, 4500 (All w/ 4 speed
transmission), Replaces: C5NN7202B
(5/16" UNF)
Gear Shift Pin fits: 9N, 2N, 8N, NAA,
Jubilee, 501, 600, 700, 800, 900, 1801,
2000, 3000, 3400, 3500, 4000, 4400, 4500
series w/ 3 & 4 speed transmission
Replaces: 9N7221B
Transmission Shift Pattern Decal
Fits: 2000, 3000, 4000 series (1965 & up);
Industrials: 230A - 540A w/ 8 speed
transmission & Live PTO
Replaces: C5NN7B292
(3-15/16" x 5-1/4")
Transmission Main Shift Lever
(For 1, 2 & 3rd Speed Gears)
Fits: Dexta, Super Dexta
Replaces: 81717916, 957E7210C
(11.89" Long. 5/16" - 24 N.F. thread
pitch)
Transmission Shifter Plate
Fits: Dexta, Super Dexta
Replaces: 957E7222
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Gear shift lever, parts cont...
Order #
FDS2479
FDS2479GK
Price
Description / Application
$112.50
Transmission Shift Cover Assembly
Fits the following w/ internal safety
switch & 6, 7, 8 speed transmission:
2000, 3000, 4000, 5000 series (10/1966 74), Replaces: 81814737 (Main lever is
13-1/4" tall from cover up)
NOTE: Stamped steel. Includes brass
fill plug, (2) shift levers, knobs, boots.
Has provision for dipstick, dipstick
not included. See website for complete
applications listing.
$4.95
Transmission Shift Cover Gasket
(For FDS2479)
Replaces: 82004680 NOTE: See website
for full applications listing.
Steering wheels, parts cont...
Order #
Price
ABC502
$2.50
FDS308
$59.95
FDS112
$44.95
Steering Wheel
Fits: 9N, 2N (1939-47)
Replaces: 2N3600
(17-5/8" dia., keyed tapered hub,
11/16" - 13/16" shaft, bare spokes)
FDS197
$6.45
Chrome Nut (For FDS112)
Replaces: 351103-S
(5/8"-18 NF x 1.132" tall)
ABC1591
$5.95
Dome Nut Washer (For FDS112)
Replaces: 2N3673
(1.497" O.D., 0.645"I.D., 0.180" thick)
NOTE: Clear zinc plating.
FDS111
$44.95
Steering Wheel
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, (Serviceable for 1801), 2000, 4000 4-cyl.
series (thru 64), Replaces: 8N3600
(17-5/8" dia., 3/4" shaft, 36 splined hub)
Order #
ABC221
FDS088
$4.50
$4.50
Description / Application
Gear Shift Lever Knob fits: All Ford models
w/ 4 & 5 speed transmission models (w/
original shift lever), Replaces: BB7213A
(3/8"-24 NF)
Gear Shift Lever Knob (Ball-Type)
Fits: Dexta, 2000, 3000, 4000, 5000 & 7000
(1965 - 74); 231, 233, 335, 420, 515, 532, 535,
2600, 3600, 4100, 4600, 5600 & 7600 (1975 81); 2610, 2810, 2910, 3610, 3910, 4110, 4610,
5610, 5900, 6610 & 7610 (1981 - 91) 3230,
3430, 3930, 4130, 4630 (March 1990 & up)
Replaces: C5NN7213A
(3/8"-24 NF) USA made
$3.50
Gear Shift Boot fits: All Ford models
(1939 to date) w/ 3 & 4 speed transmission
Replaces: C5NN7277C, 8N7277, C0NN7277
FDS189
$5.70
(Chrome)
FDS1616
(Stainless)
FDS189
$9.95
FDS1594
$4.25
Dome Nut Washer w/ Beveled Edge
(For FDS111), Replaces: 356515S36, 356515S
(0.691" I.D. x 1.500" O.D., x 0.970" thick)
NOTE: Clear zinc plating.
FDS363
$59.95
Steering Wheel w/ Cap fits: 2000, 2310,
2600, 2610, 2810, 2910, 3000, 3400, 3500,
3600, 3610, 3910, 4000, 4000SU, 4400, 4500,
4600, 4610, 4600SU, 5000, 5100, 5600, 5610,
6600, 6610, 7000, 7100, 7200, 7600, 7610,
(1965 & up); Industrials: 231, 335, 340, 445,
531, 540, 3400,3500, 4400, 4500
Replaces: D6NN3600B, 82016841
(17-5/8" dia., 3/4" shaft, 36 splined hub)
FDS2851
$4.85
NEW! Steering Wheel Cap
Fits: Same as FDS363; Plus 5610S, 8000,
9000, Replaces: C7NN3655B, 82002600
(2.128" O.D. where cap slips in steering
wheel; 1.025" tall; 2.380" O.D. above
steering wheel)
Steering Wheels just like original • All new material • Steel
spokes
FDS143
FDS143C
Price
$79.95
$24.50
Description / Application
Steering Wheel
Fits: 9N (1939-40); Ford 1-1/2 ton trucks
(1941, 1942, 1946), Replaces: 9N3600B
(18" dia., keyed hub, 3/4" shaft,
4 COVERED TO CENTER spokes)
Nut (For FDS111)
Replaces: 351114-S
(11/16" UNF x 20)
FDS1616
Steering wheels, parts
Order #
Steering Wheel
Fits: 9N, 2N (1939-47)
(17-5/8" dia., keyed tapered hub,
11/16" - 13/16" shaft) NOTE: 3 covered to
center spokes w/ grooves on outer ring.
Chrome Steering Wheel Cap
(For FDS143)
Replaces: 9N3627
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Steering wheels, parts continue on next page
177
Chassis parts
ABC085
Price
Steering Wheel Nut
(For FDS143)
(5/8"-18 NF x .381" tall)
Ford
Gear shift knobs, boot
Description / Application
Steering wheels, parts cont...
Order #
Price
FDS426
$4.95
FDS1894
$66.95
Chassis parts
Ford
FDS195
FDS215
MIS103
$46.95
$54.95
$10.75
Steering column grommets, bushing cont...
Description / Application
Steering Wheel Nut (For FDS363)
Also fits: 1801, 4040, 4140, 6000 series
Replaces: C5NN3N602A, D5NN3N602A
(11/16" x 20 NF)
Steering Wheel Emblem
Fits: 6000; Serviceable for 6000 Commander
Replaces: CONN16600A; Serviceable for
C5NN3A515A (10 x 32 thread, 2.475" tall,
3.675" length of widest point) USA made
Order #
Price
FDS1380
$9.25
Price
FDS229
$4.95
FDS375
$9.95
FDS373
$9.50
FDS424
178
$6.50
Upper Steering Column Bushing
(For Manual & Power Steering)
Fits: 2000 thru 7610 (1965 & up)
Replaces: C5NN3517A, D5NN3517A,
81811803 (1-916" x 1-1/16", .790" I.D.)
Steering wheel plates - USA made
Order #
Price
Steering Wheel (Plastic) w/ Cap
Fits: Fordson Major, Super Major, Power
Major, Replaces: E1ADKN3600A
(17-3/4" dia., splined hub, 1" shaft w/ 6
splines, 3 COVERED TO CENTER spokes)
NOTE: Original look.
FDS163
$14.95
Steering Wheel (Plastic)
Fits: Dexta, Super Dexta
Replaces: 957E3600
(17-3/4" dia., splined hub, 1-1/4" shaft
w/ 48 splines, 3 COVERED TO CENTER
spokes)
FDS395
$14.95
FDS162
$11.95
Description / Application
Sherman Transmission Instruction Plate
Fits: Ford models w/ Sherman Step Up /
Step Down transmission
Sherman Transmission Instruction Plate
Fits: NAA thru 4000 4-cyl. series
(All w/ 4 speed transmission) (thru 64)
NOTE: Installs on dash.
Power Steering Plate
Fits: 600, 700, 800, 900, 2000 4-cyl., 4000
4-cyl. series (thru 64)
Steering Wheel Spinner
Fits: Ford models
NOTE: Aluminum.
Steering column grommets, bushing
Order #
Description / Application
Patent data plates
USA made
Description / Application
Steering Column Grommet
Fits: 8N (1947-52)
Replaces: 8N3578
USA made
FDS339 Replaces: 9N14001
FDS338 Replaces: 8N14001
FDS339
Description
Order # FDS338
Price
9N, 2N (1939-47) ........................................................FDS339......... $13.10
Steering Column Grommet
Fits: NAA, Jubilee
Replaces: NAA3578B
(2-5/8" O.D.)
8N (1947-52) ...............................................................FDS338......... $13.10
Steering parts
Steering Column Grommet
Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000
4-cyl. series (1954-64), Replaces: NCA3578A
(2-3/16" O.D.)
Steering Column Grommet
Fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000,
3600, 3610, 3910, 3930, 4000, 4000SU, 4600,
4600SU, 4610, 5000, 5100, 5200, 5600, 5610,
6600, 6610, 7000, 7100, 7200, 7600, 7610, 7710,
7810 Industrials: 231, 233, 234, 335, 420, 515,
530A, 531, 532, 535, 550, 3400, 3500, 4400,
4500 (1965 & up), Replaces: C5NN3A566B,
D2NN3A566B (3" O.D., 1-1/4" hole I.D.)
Order #
FDS044
(RH)
FDS045
(LH)
Price
Description / Application
$139.95
Steering Gear Sector w/ Arm
Fits: 9N, 2N (1939-47)
$139.95 FDS044 Replaces: 9N3526
FDS045 Replaces: 9N3527
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Steering parts cont...
Order #
Price
FDS046
$77.95
FDS408
$17.95
Power steering parts
Description / Application
Steering Shaft w/ Pinion
Fits: 9N, 2N (1939-47)
Replaces: 9N3525
Steering Wheel Cover w/ Grease Fitting
Hole, Spring & Felt Seal
Fits: 9N, 2N (1939-47)
Replaces: 9N3669
NOTE: Chrome.
FDS388
Steering Sector Hardware & Seal Kit
(For manual & power steering tractors)
Fits: 8N w/ Adjustable side sector gears,
Jubilee, NAA, 600, 800, 2000 4-cyl., 4000
4-cyl. series (thru 64) NOTE: Kit includes
oil seal, adjuster bolt, nut,washer,
o-rings, shim washers & felt seal. 2 used
per tractor; Sold individually.
Steering Shaft Bearing Kit (For manual
steering tractors) fits: 8N, NAA, Jubilee,
600, 800, 2000, 3000, 4000 (All to
8/31/1968), Replaces: 8N3571 (bearing),
8N3552 (cup), New # C5NN3552A (cup)
NOTE: Kit includes: (2) bearings & (2)
bearing cups. Bearing & cup (race) must
be used together. Do not mix bearing or
cup w/ old, original parts.
FDS1350
$307.50
Power Steering Pump w/ Reservoir
Fits October/1968 & up: 2000 thru
2600, 3000 - 3900, 4000 - 4600, 5000 5700, 6600, 6700, 7000 - 7700, Replaces:
D8NN3K514GA, GB, GC, E6NN3K514EA
(2.74 GPM, 1100 PSI) NOTE: Pressure is
preset at 1100 PSI. Has 1 return port, if
your original has 2 ports you will need to
add a ’tee’. When mounted return fitting
is at 1:00.
FDS1274
$54.95
FDS1163
$5.65
FDS459
$249.95
FDS461
$249.95
$2.00
Felt Seal fits: 8N thru 4000 4 cyl as a
steering sector felt seal; 2000 3-cyl thru
8340 as a disc brake cross shaft seal
Replaces: 8N3586 NOTE: 2 used per
tractor; Sold individually.
ABC1996
$9.95
ABC2008
$12.50
Steering Gearbox Side Sector Seal
Fits: 700 thru 900 series; (2110 & 4110
4-cyl.) (1955-64), Replaces: NCB3591B
(2.110" O.D., 1.375" I.D., .315" wide)
USA made
ABC528
$39.60
Top Bearing Steering Shaft Kit
(For manual steering only)
Fits: 8N, Jubilee, NAA, 600, 601, 700, 701,
800, 801, 900, 901, 2000, 4000 4-cyl.
Replaces: 8N3518 (seat), 8N3520 (spring),
C5NN3N716A (steel bearing assy)
Steering Gearbox Pitman Shaft Oil Seal
Fits: 5000, 5110, 5600, 5900, 6410, 6600,
6610, 7000, 7600 (All w/ manual steering)
Replaces: C5NN3C615B, 81803190
(2.000" O.D., 1.500" I.D., 0.250" wide)
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
Power Steering Pump Pulley
(For tractors with canister on top of pump)
Fits: 601, 700, 701, 740, 801, 900, 901, 950,
960, 2000, 4000 4-cyl series (thru 1964)
Replaces: 231102, EBJ33556A (3.750" O.D.,
.671" bore, .125" keyway, .500" wide belt
groove) NOTE: Cast iron.
Power Steering Pump Cap
Fits the following October/1968 & up:
2000 thru TW35 w/ horizontal power
steering pump reservoir, Replaces:
C9NN3D588A, D2NN3A006B (1.500" I.D.)
Power Steering Cylinder fits: 601, 801,
2000, 2310, 2600, 2610, 2810, 2910, 3000,
3600, 3610, 4000 & SU, 4600 SU, 4610 (1957
& up) (All w/ dual cylinder steering)
Replaces: D4NN3A540B, D4NN3D547B,
E2NN3A540BA, E4NN3A540AA
(1/2" dia. rod, 7/16" threaded end)
USA made NOTE: LH & RH are the same
Power Steering Cylinder fits: 601,
801, 2000, 2310, 2600, 2610, 2810, 2910,
3000, 3400, 3600, 3610, 3910, 4000 &
SU, 4600 SU, 4610, 231, 335, 531 (1961
& up) (All w/ dual cylinder steering)
Replaces: C5NN3A739G, C5NN3C578B,
D4NN3A540A, E9NN3A540AA
(5/8" dia. rod, 7/16" threaded end)
USA made NOTE: Can also replace 1/2"
rod cylinders. Power Steering. LH & RH
are the same.
Power steering parts continue on next page
179
Chassis parts
FDS1205
$21.25
Steering Shaft Bearing Kit
Fits: 9N, 2N (1939-47), 700, 900
Replaces: 68-3571A (bearing), 9N3573
(cone), B3552 (bearing cup
NOTE: Will fit FDS046 steering shaft
w/ pinion. Kit includes: (2) bearings, (2)
cones & (2) bearing cups. Bearing & cup
(race) must be used together. Do not mix
bearing or cup w/ old, original parts.
Price
$29.30
Ford
ABC441
$84.95
Order #
FDS387
Power steering parts cont...
Order #
Price
ABC267
$32.30
Tie rod assembly, ends cont...
Description / Application
Power Steering Cylinder End
Fits: Same as FDS459, FDS461
Replaces: C5NN3A302B
(7/16"-20 Internal thread)
NOTE: LH & RH are the same.
Chassis parts
Ford
FDS1384
Fits: 2N thru 4600SU
FDS1382 Replaces: 8N3440B, 313319,
957E3440A,B, 83924040, C7NN3N406A,
EONN3N406BA
FDS1384 Replaces: 9N3442,
C5NN3N442A,C, EONN3N442BA
Description
Order # Price
$16.65
Description / Application
Front Tie Rod End
Fits: 8N (1947-52)
Replaces: 8N3270
(.687" - 18 LH thread, 4.00" to center of post)
Tie Rod Assembly (Drag link Assembly)
Fits: Jubilee, 600, 800, 2000 thru 4000 4-cyl.
FDS2492 $94.95 Utilities only (1953 - 64) (All w/out power
steering)
(LH)
FDS2497 Replaces: NAA3314B, NAA3270A,
NAA33271A
FDS2492 Replaces: NAA33315A,
NAA3270A, NAA33271A
NOTE: Adjustable from approximately 423/8" to 46-1/2" c.c. tie rod studs
Radius rod parts
FDS1382
Order #
FDS315
Price
FDS2497
(RH)
$94.95
ABC235
$17.95
Front Tie Rod End
Fits: NAA, Jubilee, 600, 601, 800, 801, 2000
4-cyl., 4000 4-cyl. (1953-64) w/ manual
steering not industrial axle
Replaces: NAA3270A
(.687" - 18 LH thread, 3.875" to center of
post)
ABC265
$16.50
Rear Tie Rod End
Fits: Some 9N, 2N, 8N, NAA, 600, 601, 800,
801, 2000 4-cyl., 4000 4-cyl. (1939-64)
w/ manual steering not industrial axle
Replaces: NAA33271A
(.687" - 18 RH thread, 4.250" to center of
post)
Radius Rod Ball Cap..............................................FDS1382....... $9.15
NOTE: 2 used per tractor; Sold individually.
Radius Rod Ball Socket..........................................FDS1384....... $17.80
NOTE: 2 used per tractor; Sold individually.
Tie rod assembly, ends
NOTE: Length is from end of shaft / tube to center of post / ball
stud.
Order #
Price
FDS2478
(RH)
$94.95
FDS2474
(LH)
$94.95
FDS314
FDS2487
(RH)
$16.65
Description / Application
Tie Rod Assembly (Drag link Assembly)
Fits: 9N, 2N (1939 - 47)
FDS2478 Replaces: 9N3304
FDS2474 Replaces: 9N3305
NOTE: Adjustable from approximately
38-1/2" to 39-3/16" c.c. tie rod studs.
Tie rod boots
Front Tie Rod End
Fits: Some 9N, 2N (1939-47)
Replaces: 9N3270
(.687" - 18 RH thread, 3.187" to center of
post)
180
Price
Description / Application
FDS336
$3.50
Front Tie Rod Boot
Fits: 9N, 2N (1939-47)
Replaces: 78-3332
(1.200" base, .475" tall, .500" hole)
FDS337
$3.95
Front Tie Rod Boot
Fits: 8N, NAA, Jubilee, 600, 800 (1947-57)
Replaces: 8N3332
(1.450" base, .600" tall, .550" hole I.D.)
NOTE: Also works as a power steering
cylinder end boot 601 thru 4610.
FDS335
$8.95
Rear Tie Rod Boot w/ Rubber Insert
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800,
2000 4-cyl., 4000 4-cyl. (1939-64)
Replaces: 9N3324, AONN3324A
(1.425" base, .850" tall, .700" hole)
FDS484
$15.75
Rear Tie Rod Boot w/ Leather Insert
Fits: 9N, 2N, 8N; Serviceable for NAA,
Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl.
(1939 - 64), Replaces: 9N3324
NOTE: Exact of original.
$94.95
Tie Rod Assembly (Drag link Assembly)
Fits: 8N up to SN: 216989 w/ early 4 bolt
FDS2482 $94.95
side sector steering gear box
(LH)
FDS2487 Replaces: 8N3304A
FDS2482 Replaces: 8N3305A
NOTE: Adjustable from approximately 36"
to 39-1/2" c-c tie rod studs.
FDS393
Order #
$72.95
Tie Rod Assembly (Tie Rod Ends, Clamps
& Drag Link Tube) fits: 8N (1947-52) w/ late
adjustable-style steering box
Replaces: 8N3304B, 8N3305B
(32-1/2" long tube; 35 1/4 to 38 1/4"
adjustment) NOTE: Check measurement
before ordering.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Tie rod boots cont...
Order #
Price
Spindle parts cont...
Description / Application
Order #
Universal tie rod boots fits: Ford models
Specify size when ordering (Base x Height x Hole I.D.)
ABC368
JDS736
ABC371
ABC369
ABC370
$3.35
Also fits as a rear tie rod boot for 601, 801,
2000, 4000 4-cyl., Replaces: A0NN3324A
(1.675" base, .900" tall, .625" hole)
JDS736
$3.95
(1.500" base, .735" tall, .550" hole)
ABC371
$3.25
(1.300" base, .965" tall, .500" hole)
ABC369
$2.95
(1.575" base, .600" tall, .650" hole)
ABC370
$3.50
(1.800" base, .765" tall, .740" hole)
$3.95
EACH
Bushing for Front Spindle fits upper
& lower on the following models: 9N,
2N, 8N, NAA, Jubilee (1939-54); Fits
upper only on the following models:
501, 600 & 800; 700, 900 series (Both w/
wide front) 2000 3 & 4-cyl., 2600, (3000
except vineyard) 3600, 3610, 3900, 3910,
4000 4-cyl., 4100 3-cyl., 4600SU, 4610,
6000, Dexta, (1955-81) (All w/ standard
adjustable wide front, not for heavy duty
axle), Replaces: 2N3109
(1.250" I.D., 1.375" O.D., 1.500" long)
NOTE: Will not fit heavy duty or
industrial axles.
Price
$32.50
Description / Application
ABC381
$12.95
Spindle Bushing Kit fits: 600, 700, 800,
900 w/ Wide Front, 2000, 2600, 3600,
3900, 4000 except Vineyard, Dexta, Super
Dexta, 3000, 4100, 4600, 4600SU, 4610 (All
w/ standard axle), Replaces: contains (2)
2N3109 (upper) & (2) NCA3110A (lower)
(2N3109 = 1.250" I.D., 1.375" O.D., 1.500"
long NCA3110A = 1.352" I.D., 1.474 O.D.,
1.490" long) NOTE: Will not fit heavy
duty or industrial axles.
Front Axle Support Pin
Fits: 9N, 2N, 8N; 6000 w/ All Purpose wide
front axle (1/1963 - 12/1966)
Replaces: 2N3126D
(1.743" O.D., 1.310" I.D.)
ABC088
ABC379
$36.50
$10.45
Front Axle Support Pin
Fits: NAA, Jubilee (1953-54); Fits the
following w/ front hydraulic pump drive:
(2N SN: 167489 & up), 8N; Fits following
w/ all purpose wide front axle: 6000
1/1963 - 12/1966, Replaces: NAA3126B
(1.743" O.D., 1.310" I.D.)
NOTE: Not threaded.
Front Pivot Bushing
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800,
2000 4-cyl., 4000 4-cyl. series (1939-64) (All
w/ standard front axle), Replaces: 2N3039
(1.770" I.D.) USA made NOTE: Will not fit
heavy duty or industrial axles.
Seat pan, parts
The following seat parts fit 9N, 2N, Early 8N:
Order #
Price
FDS067
$48.50
Seat Pan, Replaces: 8N400
(19" dia.; 5/8" center bolt hole)
NOTE: Steel, 9 hole, bolt down, non-flip
back.
ABC372
$18.30
Seat Repair Kit w/ Rivets
(For FDS067 Seat Pan)
(5-1/2" O.D.; 5/8" center bolt hole)
USA made
Spindle parts
Order #
ABC151
Price
$9.95
Description / Application
Thrust Bearing (For Front Spindle)
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 2000, 4000 series, Dexta,
Super Dexta, 2000, 3000, 4000SU (1939
& up) all w/ adjustable I Beam Regular
Front Axle (Not H.D. axle)
Replaces: C0NN3123B
(1.350" I.D., 2.195" O.D.)
Description / Application
FDS068
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
$49.95
Seat Spring
Replaces: 9N404
181
Chassis parts
Order #
Spindle Dust Seal fits: 9N, 2N, 8N, NAA,
Jubilee, 501, 600, 601, 700, 701, 800, 801,
900, 901, 2000 4-cyl., 4000 4-cyl. (thru
1964); 2000 thru 4600SU, 4610, 6000 (1965
& up), Replaces: 8N3528, C5NN3125A
ABC468
Front axle parts
ABC087
Description / Application
Ford
ABC368
Price
ABC1442 $3.20
Flip-back seat pan, parts
Monroe® easy ride seat parts cont...
The following seat parts fit Late 8N, NAA, Jubilee, 501, 600, 700,
800, 900, 1801 series, 2000, 4000 4-cyl. series (thru 64), 'Some' Dexta,
Super Dexta:
Order #
Price
IHS585
$22.80
IHS325
$2.05
Order #
Price
FDS105
$49.10
FDS106
Description / Application
Seat Pan w/ Hinge Half
(For Flip-Back Seat)
Replaces: C5NN400AE
NOTE: Also serviceable for resto-ride
seat.
$16.15
Seat Hinge & Bolt (For Flip-Back Seat)
Replaces: NCA436A, 352644S36
$44.50
Chassis parts
Ford
FDS107
FDS294
$10.75
FDS232
$3.50
Seat Spring (For Flip-Back Seat)
Replaces: NCA404B
(2-1/4" wide)
Order #
Price
$27.95
IHS329
MHS044
ABC526
182
$32.50
$39.95
$9.65
Seat Pivot Support Rod
Fits: 8N, NAA, Jubilee w/ optional
Monroe® Easy Ride seat, Replaces: 230287
(6") NOTE: Includes rod, (2) flat washer,
(2) rubber bushings & (2) 5 bolts.
Rubber Seat Bushing
Fits: 9N, 2N, 8N, NAA, Jubilee
w/ optional Monroe® Easy Ride seat
Replaces: 230288 NOTE: 2 used per
horizontal bolt; Sold individually.
Seat assembly, parts
Order #
Price
ABC445
$139.30
FDS299
(LH)
$54.95
FDS300
(RH)
$54.95
Seat to Spring Retaining Clip w/ Rivets
(For original 3" wide Seat Spring)
Replaces: 8N433
Seat to Spring Rubber Bumper
(For Flip-Back Seat), Replaces: 8N434B
(7/8" O.D.) NOTE: (1) FDS232 rubber
bumper required per tractor.
Monroe® easy ride seat parts
IHS030
Description / Application
Description / Application
Seat Spring Coil
Fits: 9N, 2N, 8N, NAA, Jubilee w/
optional Monroe® Easy Ride seat
Replaces: 230279
Rear-Mounted Seat Shock Absorber
Fits: 9N, 2N w/ optional Monroe® Easy
Ride seat (Center-to-center compressed =
11-1/2", Fully extended = 18-1/8")
USA made
Seat Shock Absorber w/ Bushings
Fits: 8N, NAA, Jubilee w/ optional
Monroe® Easy Ride seat
Replaces: 231239 (Center-to-center
compressed = 6-1/4", fully extended =
8-1/4) NOTE: One horizontal bolt hole
at each end.
Seat Shock Bolt (For IHS329 & IHS347)
Replaces: 230290
(7/16" NC thread, .625" shoulder, 2.380"
o/a length) USA made
FDS299
FDS477
FDS300
Description / Application
Universal Full Suspension Seat w/ Back
Rest & 5-Angle Base (w/ slide track &
mounting brackets) fits: 9N, 2N, 8N,
NAA, Jubilee, 501, 600, 700, 800, 900,
1801, 2000, 2310, 2600, 2610, 2810, 2910,
3000, 3400, 3500, 3550, 3600, 3610, 3910,
3930, 4000, 4000SU, 4100, 4110 4400,
4500, 4600, 4600SU, 4610, 5000, 5600,
5610, 5610SU, 5900, 6600, 6610, 7000,
7600, 7610 (All w/out cabs), Replaces:
D9NN400DB12B NOTE: Can be adapted
to fit many tractors & lawn mowers.
Customer may have to trim base on
tractors using remote hydraulics.
Rubber Seat Spring fits: 501, 600, 700, 800,
900, 1801, 2000, 4000 series (thru 64) w/
"Rest-O-Ride" seats; Major, Super Major,
Power Major w/ Deluxe seat; 6000 (196164) w/ Regular seat not Deluxe seat
FDS299 Replaces: NDA448A
FDS300 Replaces: NDA447A
NOTE: FDS299 & FDS300 springs do not
come w/ bushings. You must reuse old
ones or purchase our #FDS477 kit.
$39.95
Seat Bushing & Pin Kit
(For FDS299, FDS300)
Replaces: 230612, 230626, 305191
NOTE: Bushings must be reamed/honed
when installed.
JDS533
$24.50
Seat Adjustment Handle fits: 501, 600,
700, 800, 900, 1801, 2000, 4000 series
(thru 64) w/ "Rest-O-Ride" seats; Also
fits Major, Super Major, Power Major w/
Deluxe seat; Also fits 6000 (1961-64) w/
Regular seat not Deluxe seat
Replaces: NDA462A
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Knoedler seat part
Fits: 9N thru 4000 4-cyl. series, 4030, 4040,
4121, 4130, 4140 (1939-64)
(All w/ Knoedler 1800 seat) USA made
Description
Order # Price
Seat Bearing (For Knoedler Seats).........................ABC537......... $14.30
NOTE: 2 to 8 used per tractor; Sold individually.
Fenders, parts - Licensed by Ford
"The only licensed stamped fenders on the market!"
• Stamped w/ raised Ford "script" like original!
• Not plastic molded where embossed "Script" will sand off!
• Fenders are sold individually.
• Fit to tractor before painting.
Order #
Price
ABC2255
$28.95
Fender Bolt Kit fits: 9N thru NAA;
Serviceable for 600 thru 4000 4 cyl thru
1964 when not equipped with sway bar
brackets or loader brackets
Replaces: 375651S8 NOTE: Includes 4
carriage bolts, nuts, lock washers.
FDS102
$159.95
Fender Skin only
w/ raised Ford "script" imprint
Fits: 8N (June 1950-52);
Jubilee (1953), NAA (1954)
Replaces: 8N16312C
NOTE: Steel, primer paint.
FDS414
$224.95
FDS238
$142.15
FDS301
(w/ script)
$179.95
FDS078
(w/out
script)
$149.85
Fits: Ford models w/ 19" pan (side to side) (Foam pad, drawstring)
Order #
Price
Description
$36.50
Tractor Seat Pad
(Dark red w/ white piping
w/ white "Ford" script)
FDS284
$36.50
Tractor Seat Pad
(Dark blue w/ white piping
w/ white "Ford" script)
FDS230
FDS321
$33.75
Tractor Seat Pad
(Red & white w/ red "Ford" script)
USA made
$36.50
Tractor Seat Pad
(Blue & white w/ blue "Ford" script)
USA made
FDS322
$36.50
FDS1226
$36.50
Tractor Seat Pad
(Gray & white w/ gray "Ford" script)
USA made
Tractor Seat Pad
(Black w/ red/white "Ford" script,
black/white "Tractor")
MIS006DB
$29.95
Tractor Seat Pad
(Blue & white) USA made
MIS006DR
$29.95
Tractor Seat Pad
(Red & white) USA made
Chassis parts
Fender Skin only
w/out raised Ford "script"
imprint
Fits: 9N, 2N; 8N (thru June 1950)
Replaces: 9N16312
NOTE: Steel, primer paint.
Fender Skin only
w/ raised Ford "script" imprint
Fits: 600, 800 series (1954-57)
Replaces: NCB16312C
(25" H x 48" W x 7" wide 'top lip')
NOTE: Steel, primer paint.
Fender Skin only
w/ raised Ford "script" imprint
Fits: 501, 601, 701, 801, 901 (195762), 1801, 2000, 4000
4 cyl.; Serviceable for 2000 3-cyl.
thru 4610 (1965 & up)
Replaces: C5NN16312AK,
C5NN16312AU, E1NN16315DA
(17-3/4" H x 42" W)
NOTE: Steel, primer paint.
Fender Assembly w/ Bracket
Fits: 601, 801, 1801 series, 2000,
2310, 2600, 2610, 2810, 3000, 3400,
3500, 3600, 3610, 3900, 3910, 4000
& SU, 4100, 4110, 4400, 4500,
4600SU & 4610 (1965 & up), 340A,
420, 445, 445A, 535, 540A, 540B,
545, Replaces: C5NN16312AK,
C5NN16312AU (Heavy gauge,
Skin measures 17-3/4" H x 42" W)
NOTE: Steel, primer paint.
Fenders, parts continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Ford
$97.50
Tractor seat pads
FDS283
Description / Application
FDS070
183
Fenders, parts - Licensed by Ford cont...
Order #
ABC437
ABC2255
$28.95
$14.25
Ford
FDS174
Price
$1.00
Chassis parts
FDS228
FDS170
$14.25
Toolboxes
Description / Application
Order #
Price
Rivet (For Fender Skin) fits: 9N, 2N, 8N,
NAA, Jubilee, 501, 600, 700, 800, 900
series (thru 57) (.371" dia., 1.010" o/a
length, .746" head dia., .800" useable
length) NOTE: 4 used per fender (9N,
2N, 8N, NAA) & 8 used per fender
(600, 800); Sold individually.
ABC308
$37.95
FDS247
$34.50
FDS136
$74.95
FDS214
$47.95
ABC472
$32.50
Fender Bolt Kit fits: 9N thru NAA;
Serviceable for 600 thru 4000 4 cyl thru
1964 when not equipped with sway bar
brackets or loader brackets
Replaces: 375651S8 NOTE: Includes 4
carriage bolts, nuts, lock washers.
Ford "Script" Painting Mask Kit
For 8N (1947-52) fenders & hoods (2) hood & (2) - fender self-adhesive masks
per kit Licensed by Ford USA made
Ford "Script" Painting Mask Kit
For NAA, Jubilee fenders & hoods, (600,
800 series (thru 1957) hood only) (2) hood & (2) - fender self-adhesive masks
per kit Licensed by Ford USA made
$47.25
Fender Light Brackets, Pair
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: 9N13470, 9N13471
NOTE: Sold as pair. Ford gray.
Running boards, parts
Order #
ABC439
(LH)
Price
Description / Application
$69.95
ABC440
(RH)
Running Board (Foot Platform)
w/out Rear Bracket
$69.50 Serviceable for 9N, 2N
NOTE: Sold individually.
ABC446
$15.35
FDS2280
$16.95
184
Rear Bracket
Serviceable for 9N, 2N
NOTE: Sold individually.
Running Board to Bracket Hardware Kit
Fits: 8N, NAA, Jubilee, Golden Jubilee
(1947-54), Replaces: 355471S8
NOTE: Includes 8 special carriage style
bolts, lock washers, nuts.
Application
Fits: 9N, 2N
(11" long, 4" wide, 4-1/2" tall, Bolt holes
center to center = 5-1/2")
NOTE: Must redrill hole.
Fits: 8N
Replaces: 8N17005
NOTE: Mounts under the hood. Like
original.
Fits: Jubilee, NAA (1953-54)
Replaces: NAA16451
USA made NOTE: Must be spot welded
to existing running board.
Fits: 501, 600, 700, 800, 900, 2000, 4000
4-cyl. series (1954-64)
Replaces: C5NN17005F, NCA17005A
NOTE: Fits between step plate & rear axle
housing.
Fits: 501 thru 8830 (1955 & up) Industrial:
340A, 420, 445, 445A, 535, 540A, 540B, 545
Replaces: C5NN17005C, C5NN17005F11M
(4" wide x 16" long x 4-1/4" tall)
NOTE: Fits on FDS078, FDS238, FDS301
fenders.
Brake parts
Order #
Price
ABC192
$54.25
NEW!
ABC2951
(2-pc. set)
$38.50
ABC020
(4-pc. set)
$74.95
MIS1131
$33.95
Description / Application
Brake Lining Set w/ Rivets
Fits: 9N, 2N (1939-47), Replaces: 9N2021B
(2" W x 15-1/2" L)
NOTE: Set includes: 4 brake linings
w/ rivets. No returns on broken shoes.
Bonded Brake Shoe Set
Fits: 9N, 2N (1939-47)
Replaces: 9N2019
Brake Riveting Tool Kit
(1-1/4" throat, 1/8" dia. rivet punch)
NOTE: Use to rivet brake linings to
existing shoe or band. Includes a tool
to drive out old rivets, a tool to drill &
countersink linings, a tool to peen the
new rivet & instructions. Mounts into
vice. Mounts into vice. Not for use w/
deep recess shoes.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Brake parts cont...
Order #
MIS2547
Price
$89.95
Brake parts cont...
Description / Application
Riveting Tool (For brake shoe & disc
relining for most tractors)
(3-3/8" deep throat x 2-1/8" high throat)
USA made
NOTE: Includes 2 punches.
Price
Description / Application
FDS417
Order #
$4.95
EACH
Brake Pedal Return Spring
Fits: 2000, 2310, 2600, 2610, 2810, 2910,
3000, 3600, 3610, 3900, 4000, 4000 SU,
4100, 4110, 4500, 4600; Industrials: 230A
& up (1965 & up), Replaces: C5NN2472B,
E1NN2472BA (3.221" o/a length)
NOTE: Mounts under running board. 2
used per tractor; Sold individually. Go to
website for full applications.
ABC1225
$2.15
Disc Brake Ball
Fits: 2810 thru 7710
Replaces: D5NN2N141A
(7/8" dia. steel ball)
NOTE: Sold individually.
NEW!
$26.50
ABC2953
(2-pc. set)
ABC083
$49.25
(4-pc. set)
FDS1445
FDS194
$0.75
$99.95
$75.95
FDS251
$4.75
FDS241
$19.95
FDS412
$7.10
Bonded Brake Shoe
Fits: 501, 600, 700, 800, 900, 1801, 2000,
4000 series (1954-64), Replaces: NCA2218B
NOTE: 4 required per tractor;
Sold individually.
Brake Drum Retaining Screw
Fits: 8N thru 981 (thru 1959)
Replaces: 24667S, 24667S8
(Zinc; 3/8"-16NC x 3/4") NOTE: 2 to 4
used per tractor; Sold individually.
Brake Backing Plate
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N2212B USA made
NOTE: 2 used per tractor;
Sold individually.
Brake Dust Shield w/ Felt Seal
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N2255 (plate) & 8N2217 (seal)
NOTE: 2 used per tractor;
Sold individually.
Brake repair kits
NOTE: Each complete kit contains all the small parts for
comprehensive rebuilding of brake actuating mechanism when
installing new shoes. Does not include shoes.
Order #
FDS1224
Application
$34.95
Fits: 9N, 2N (1939-47)
Replaces: 9N2065
NOTE: Repairs 1 side.
FDS252
$35.50
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8NAA2250
NOTE: Repairs 1 side.
ABC165
Felt Seal only (For Brake Dust Shield)
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N2217
NOTE: 2 used per tractor;
Sold individually.
Parking Brake Lever
Fits: NAA, Jubilee, 600, 700, 800, 900
(1953-57), Replaces: NAA2782A
NOTE: 2 used per tractor;
Sold individually.
Brake Adjusting Hole Cover
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000, 3000 series, (4000 4-cyl.
series) (1947 & up), Replaces: H2092,
ERK27670
Price
Chassis parts
FDS1870
$19.75
EACH
Ford
ABC084
Bonded Brake Shoe Set
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N2200B
$84.50
Fits: 501, 600, 700, 800, 900, 1801 series,
2000, 4000 4-cyl. series (1954-64)
Replaces: NCA2250
USA made
NOTE: Repairs 1 side.
Differential side cover gasket
Fits: 9N, 2N, 8N, (501 thru 4000 4-cyl.)
(1939-64) EXCEPT Jubilee; Also a PTO
Shifter Plate Cover to Differential Housing
Gasket for Ford models (1939 & up)
(including NAA), Replaces: 9N4131
USA made
Description
Order # Price
Differential Side Cover Gasket............................... ABC289........ $1.00
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
185
Pinion shaft seal
Rear axle, hub, parts cont...
Fits: NAA, Jubilee
Replaces: NAA4676A
(1.375" I.D., 2.378" O.D., .312" width)
USA made
Description
Order # Order #
Price
$2.20
Rear Lug Stud fits: 8N, NAA, Jubilee, 501,
600, 700, 800, 900, 1801, 2000, 4000 4-cyl.
Replaces: 312696 (5/8" x 18 thread, 1-5/8"
o/a length) USA made NOTE: 16 used per
tractor; Sold individually.
ABC386
$1.70
Rear Lug Nut fits: 8N, NAA, Jubilee, 501,
600, 700, 800, 900, 1801, 2000, 2600, 2610,
2810, 2910, 3000, 3610, 3910, 4000 4-cyl.,
4110, Replaces: 8N1134 (5/8" x 18)
USA made NOTE: 16 required per tractor;
Sold individually. For 2600-up check
thread size.
ABC357
$9.65
Rear Axle Shaft Paper Gaskets / Shims
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: 9N4130, 8N4229E
(0.015" thick) USA made
NOTE: Use for seal between bearing
retainer, axle housing or backing plate.
Use in multiples to replace shims 8N4229.
Sold as a package of 10.
ABC264
$15.15
Axle Shaft Collar
Fits: 9N, 2N (1939-47)
Replaces: 9N4132
USA made
ABC199
$58.70
ABC197
$11.40
Price
Pinion Shaft Seal........................................................ ABC1543...... $13.95
Rear end overhaul gasket kit
Fits: 9N, 2N, 8N (1939-52)
Description
Order # Price
Chassis parts
Ford
7-Piece Rear End Overhaul Gasket Kit.................. ABC433........ $11.65
Rear axle, hub, parts
Order #
Price
ABC261
$165.95
FDS043
Description / Application
Axle Shaft
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N4235C
$84.25
Rear Hub Assembly w/ Bolts
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N1171
FDS255
$5.30
FDS318
$11.10
FDS479
$2.00
ABC234
$37.20
FDS1201
$7.50
FDS1211
186
$1.30
Rear Axle Hub Washer
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N4293
USA made
Description / Application
FDS394
Rear Axle Nut & Snap Ring Kit
Fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N4179, 8N4187, CBPN4179A
USA made NOTE: Original style.
Axle Shaft Cone
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: 2N4221
USA made
Axle Shaft Cup
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800,
2000 4-cyl., 4000 4-cyl. (1939-64)
Replaces: 9N4222
Snap Ring only (For FDS318)
Replaces: 8N4187
USA made
Rear axle shaft seals
Order #
Price
Description / Application
Wheel Clamp Lock Nut
Fits: 8N, NAA, Jubilee (1947-54)
(1-1/4" - 18)
NOTE: No re-threading necessary on
worn shafts.
ABC382
$15.70
Rear Axle Shaft Inner Oil Seal Pair
Fits: 9N, 2N (1939-47)
NOTE: This is an improved differential
seal which stops leakage from differential
into the brakes. Installs without pulling
axle bearing. Slides on the axle & taps into
place at lip of bearing retainer. Must pack
the wheel bearing w/ grease when using
these seals. Sold as a pair.
ABC196
$11.95
Inner Seals
Rear Lug Stud fits: 9N, 2N (1939-47),
Replaces: 9N1117 (5/8" x 15 NF thread,
1.875" o/a length) NOTE: 12 required per
tractor; Sold individually.
Rear Lug Nut fits: 9N, 2N (1939-47)
Replaces: 33806S7, 81871950
(5/8"-18 thread) USA made
NOTE: 12 required per tractor;
Sold individually.
Rear Axle Shaft Inner Oil Seal Pair
Fits: 8N, NAA, Jubilee
Replaces: 8N4233A
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Rear axle shaft seals cont...
Order #
Price
Description / Application
Inner Seals cont...
ABC282
$6.75
Hydraulic lift parts cont...
ABC299
$78.50
ABC300
$34.55
ABC266
$13.25
ABC314
$29.95
ABC315
$1.25
Rear Axle Shaft Inner Oil Seal
Fits: Dexta, Super Dexta, 2000, 3000
(1965 & up), Replaces: C9NN4N109A
(1.869" I.D.; 2.75" O.D.; .5045" wide)
Outer Seals
ABC194
$19.40
Rear Axle Shaft Outer Oil Seal Pair
Fits: 9N, 2N (1939-47)
Replaces: 9N4251, D6NN4251A
FDS427
ABC193
ABC491
$34.75
$19.40
$5.75
Rear Axle Shaft Outer Oil Seal Pair
w/ Sheet Metal Retainers fits: 8N up to SN:
486752, Replaces: A8NN4248A
(3.75" O.D.) NOTE: Used on tractors
w/ sheet metal seal retainers. 2 used per
tractor; Sold in pairs.
Rear Axle Shaft Outer Oil Seal Pair
Fits: 8N SN: 486753 & up, NAA, Jubilee
Replaces: D5NN4115A
(3.77" O.D.) NOTE: Used on tractors w/out
sheet metal seal retainers.
Rear Axle Shaft Outer Oil Seal
Fits: Dexta, Super Dexta, 2000, 3000
(1965 & up), Replaces: C5NN4115B
NOTE: 2 used per tractor;
Sold individually.
FDS431
$4.95
EACH
$3.95
Rear Axle Shaft Outer Oil Seal Gasket
(Rubber) fits: 8N, NAA, Jubilee (1947-54)
Replaces: 8N4284
(2-3/16" O.D. x 1-15/16" I.D.)
USA made NOTE: 2 used per tractor;
Sold individually.
Rear Axle Shaft Outer Oil Seal Retainer to
Housing Gasket fits: 8N up to SN: 486752
Replaces: 8N4225 (4-3/8" O.D. x 3-3/4" I.D.)
NOTE: 2 used per tractor;
Sold individually.
ABC316
ABC317
Price
$7.95
Description / Application
Hydraulic Lift Cylinder
(For 2-1/2" dia. piston)
Fits: 9N, 2N, 8N
Replaces: 9N510D
Hydraulic Lift Piston
Fits: 9N, 2N, 8N (1939-52)
Replaces: 9N530B
USA made
3-Piece Steel Ring Kit
(For ABC300)
USA made
Hydraulic Lift Piston
Fits: NAA, Jubilee (1953-54)
Replaces: NAA530B; Optional for 9N, 2N,
8N when used w/ O-ring (NAA533A),
back-up washer (NAA473A)
USA made
$2.90
Washer (For ABC314)
USA made
FDS273
$42.95
FDS242
$27.25
FDS073
$3.50
Hydraulic lift parts
Order #
Hydraulic Valve Adaptor w/ O-Rings,
Bolts & Instructions fits: 501, 600, 700, 800,
900 series, 1801, 2000, 3000, 4000 series,
5000, 2600, 3600, 4600, 5600, 6600 series
Industrials: 230 thru 545 (1954-81)
((2) 3/8" NPT ports) USA made
NOTE: Installs between your existing
hydraulic block off plate on your lift
cover to run external hydraulics off the
tractor.
O-Ring (For ABC314)
Gaskets
FDS428
Description / Application
Quadrant Stop Kit w/ Wing Nut & Flat
Washer fits: Ford models (1939-64) except
Majors, Replaces: 9N521
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Hydraulic Lift Draft Control Plunger
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. (193964), Replaces: 8N541B
NOTE: Fine thread-style.
Hydraulic Lift Lever Control Friction Plate
Fits: 9N, 2N, 8N, Jubilee, NAA, 501, 600,
700, 800, 900, 1801, 2000, 4000 4-cyl. (193964), Replaces: 2N516A, 2N516A2
Hydraulic Lift Lever Cover Friction Disc
Fits: 9N thru 7700 series (1939 & up)
Replaces: C5NN518B, 83977032
(3" O.D., 7/16" center hole)
Hydraulic lift parts continue on next page
187
Chassis parts
Price
$83.55
Ford
Order #
FDS457
Hydraulic lift parts cont...
Order #
ABC219
FDS416
Price
$6.05
$14.85
Hydraulic pump parts cont...
Description / Application
Hydraulic Lift Oil Level / Dipstick
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: NAA927C
Order #
Price
FDS365
$21.15
Hydraulic Pump Control Valve Assembly
Fits: 9N, 2N (1939-47)
Replaces: 9N640
Hydraulic Lift Oil Level / Dipstick
Fits: 600, 700, 800, 900, 1811, 2000 4-cyl.,
4000 4-cyl. series (1954-64) except Grove &
Offsets, Replaces: NCA927BC
ABC549
(LH)
$100.75
ABC551
(RH)
$100.75
ABC549
ABC551
FDS353
$24.95
FDS2236
$624.95
ABC1809
$42.50
ABC1812
$46.50
ABC1820
$30.75
Front Hydraulic Pump Drive Shaft
Fits: Some 9N, 2N, 8N
Replaces: 194354 (13" long, 3/4" O.D., 1
end is 6 spline and the other end is 0.187
keyway) USA made NOTE: Measure
before ordering. Use w/ ABC1809,
ABC021.
ABC1814
$45.65
Front Hydraulic Pump Drive Shaft
Fits: NAA, 600, 800, 2000 4-cyl., 4000 4-cyl.
series (1953-64), Replaces: 195454
(9-3/8" length, pulley end = 1" O.D. x 10
splines, pump end = 3/4" O.D. w/ 3/16"
x 3/4" keyway) NOTE: Measure before
ordering. Use w/ ABC1812.
Hydraulic lift cover repair gasket kits
Order #
Price
Application
Chassis parts
Ford
Kits
ABC089
ABC090
ABC431
$13.50
$9.60
$9.95
Fits: 9N, 2N, 8N USA made NOTE: Kit
includes: (2) valve chamber gaskets, (1)
lift cover gasket, (1) pump base gasket,
(2) inspection cover gasket, (1) cylinder to
center housing cover gasket, (2) hydraulic
lift cylinder housing gasket, (1) PTO
gasket, (1) lift handle quadrant gasket, lift
piston o-ring & back up washer.
Fits: NAA, Jubilee (1953-54)
NOTE: Kit includes: (1) lift housing to
rear end gasket, (1) lift cylinder gasket, (1)
lift piston o-ring & back up washer, (1) lift
handle quadrant gasket, miscellaneous
o-rings for lift cylinder.
Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000,
4-cyl. series (1954-64)
Gasket only
ABC091
$3.20
Hydraulic Lift Housing Gasket only
Fits: 9N, 2N, 8N (1939-52)
Replaces: 9N502
Hydraulic pump parts
Order #
FDS153
188
Description / Application
Price
Description / Application
$249.95
Basic Hydraulic Pump Rebuild Kit
Fits: 9N, 2N, 8N (1939-52)
Contains (1) Base Gasket, Replaces: 9N611;
(2) Chamber Repair Kit, Repairs 9N621,
9N622; (2) Cam Block, Replaces: 9N617A;
(2) Piston, Replaces: 9N615; (1) PTO Shaft
Bushing, Replaces: 9N649A; (1) Safety
Valve, Replaces: 8N638; (1) Sump Plug
Gasket, Replaces: 8N7011; (2) Side Gasket,
Replaces: 9N613; (1) PTO Shaft Gasket,
Replaces: C5NN747A; (2) Side Plate
Gasket, Replaces: 9N4131
Hydraulic Pump Complete Valve Chamber
Assembly
Fits: 9N, 2N, 8N
ABC549 Replaces: 9N622
ABC551 Replaces: 9N621
Hydraulic Pump Safety Valve Assembly
Fits: 9N, 2N, 8N (1939-52); NAA, Jubilee
Replaces: 8N638, NAA984F
Hydraulic Pump Assembly
w/ Relief Valve
Fits: 8N
Replaces: 8N605A
Front Hydraulic Pump Drive Hub Adaptor
Fits: Some 9N, 2N, 8N when equipped
w/ ABC021 crankshaft pulley
Replaces: 192161 (3-3/8" O.D., 2-3/8" c.c.
across bolt holes, 3/4" spline I.D., 6 splines.
(4) 1/4" mounting holes, 1.005" thick)
NOTE: Measure old pulley bolt spacing
before ordering. Use with ABC1820 shaft.
Front Hydraulic Pump Drive Hub Adaptor
Fits: NAA, 600, 800; (2000, 4000 4-cyl.
series), Replaces: 290421, 500934
(10 splines, 1" I.D., 2-3/4" c.c. across bolt
holes, 4" o/a dia., 7/16" bolt holes)
USA made NOTE: For shaft use ABC1814.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Piston pump manifold (lines), part
Order #
FDS074
FDS3017
Price
Description / Application
$295.00 NEW! Hydraulic Piston Type Pump
$62.85
Piston pump, parts cont...
The following piston pump parts fit: Some NAA & Jubilee, 501,
600, 700, 800, 900 series, 1801, 2000, 4000 4-cylinder series (thru 1964)
Price
Description / Application
FDS333
$75.65
NEW! Hydraulic Vane to Piston Pump
Changeover Plate fits: NAA, Jubilee,
Golden Jubilee, Serviceable for NAA876A
NOTE: Includes (4) o-rings. See website
for instructions.
Hydraulic Piston Type Pump Shaft
Replaces: NCA966E USA made
NOTE: Will fit pumps w/ tapered bearing
style pump shaft not roller bearing style
pump shafts (NAA600C & NCA600E).
FDS1587
$11.25
Proof Meter Drive Bolt
(For Vane & piston type hydraulic pumps)
Fits: NAA thru 4000 4-cyl. (1953-64)
Replaces: EAF951A
FDS437
$8.55
Hydraulic Piston Type Pump Shaft Bearing
(For NCA600C or NCA600F pump)
Replaces: 8A-1201C, D5NN1201A
NOTE: Will fit pumps w/ tapered bearing
style pump shaft not roller bearing style
pump shafts (NAA600C & NCA600E).
FDS439
$5.80
Hydraulic Piston Type Pump Shaft Cup
(For NCA600C or NCA600F pump)
Replaces: 8A1202B, D5NN1202A
NOTE: Will fit pumps w/ tapered bearing
style pump shaft not roller bearing style
pump shafts (NAA600C & NCA600E).
FDS334
$37.50
ABC200
$11.65
ABC201
$8.50
Piston pump, parts
The following piston pump parts fit: Some NAA & Jubilee, 501,
600, 700, 800, 900 series, 1801, 2000, 4000 4-cylinder series (thru 1964)
Order #
Price
Description / Application
FDS1919
$849.95 Piston Type Hydraulic Pump
FDS1262
$187.25 Hydraulic Piston Type Pump Gear
ABC156
FDS2855
FDS2857
FDS438
Replaces: NAA600D, NCA600C, NCA600F
USA made NOTE: FDS1919 can replace
your vane style pump when using piston
style hydraulic manifold lines.
Housing (For NCA600C or NCA600F
pump), Replaces: NCA905C
USA made NOTE: Will fit pumps
w/ tapered bearing style pump shaft
not roller bearing style pump shafts
(NAA600C & NCA600E).
$52.95
$64.95
$32.50
$10.26
Hydraulic Piston Type Pump Repair
Kit w/ Plate Assy & Seal, Replaces:
CCPN600A, CCPN600B (Services 1953 thru
1964 4-cyl. gas, diesel models using piston
type pump NCA600C & NCA600F)
NOTE: Piston type pump has replaced
vane type pump in many early models.
Will fit pumps w/ tapered bearing style
pump shaft not roller bearing style pump
shafts (NAA600C & NCA600E).
NEW! Hydraulic Piston Pump Valve Seat
Removal Tool fits: NAA - 4610, 6000 series
using piston type hydraulic pump
Replaces: FNH01306 USA made
NOTE: See website for additional
applications.
NEW! Hydraulic Piston Pump Valve Seat
Installation Tool fits: NAA - 4610, 6000
series using piston type hydraulic pump
Replaces: FNH01305 USA made
O-Ring & Gasket Kit USA made
NOTE: Kit includes: (2) - Main pump
body gaskets; (1) - Pump mount gaskets;
(1) - Pump body o-ring; (4) - Pump
manifold o-ring; (1) - tach drive gasket.
Hydraulic Piston Type Pump Main Drive
Gear, Replaces: C3NN908A
USA made
Needle Bearing Assembly (For Piston
pump drive gear housing)
Replaces: NCA881A, 36433
Hydraulic Piston Pump Shaft Oil Seal
Replaces: C5NN851A, Will replace
NCA851A, D8NN851AA
(1.000" I.D., 2.004" O.D., 0.531" W)
Conversion PTO assys. (1-3/8")
NOTE: The PTO Assemblies replace & convert
1-1/8" shaft to 1-3/8" spline. PTO shaft is
assembled with oil seal, bearing, housing,
cap, bearing retainer ring & gasket.
Order #
Price
FDS216
$158.30
Fits: 9N, 2N, 8N (1939-52)
Replaces: 9N70038
(1-3/8", 30-7/8" long)
FDS217
$158.30
Fits: NAA, Jubilee (1953-54)
Replaces: NAA70038
(30-3/16" long) USA made
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Application
Conversion PTO assys. continue on next page
189
Chassis parts
Order #
Ford
Manifold (Lines) (Piston type pump a.k.a.
round pump) fits: NAA, Jubilee, Golden
Jubilee (1953-54), Replaces: NAA876A
USA made
PTO parts cont...
Conversion PTO assys. (1-3/8")
cont...
Order #
NOTE: The PTO Assemblies replace & convert
1-1/8" shaft to 1-3/8" spline. PTO shaft is
FDS015
Price
PTO Shifter Support Housing
Fits: 600, 800, 900, 2000, 4000 4-cyl. series
(thru 1964) w/ 5 speed transmission
Replaces: NDA770B
assembled with oil seal, bearing, housing,
Chassis parts
Ford
cap, bearing retainer ring & gasket.
Order #
Price
FDS218
$139.95
Application
Fits: 600, 700, 800, 900 series (1954-64)
except Select-O-Speed models
Replaces: NCA70038, 310084
(32-11/16" long) USA made
NOTE: On some apps. may have to press
thrust collar forward 1/4" to clear trans.
seal.
MIS118
$48.50
MIS138
$48.50
PTO parts
Order #
Price
ABC085
$4.50
ABC313
$1.00
ABC086
$10.75
ABC566
$14.50
ABC140
ABC1501
190
$7.85
$9.95
Description / Application
PTO Knob
Fits: Major Diesel, Power Major, Super
Major, Replaces: EBB7213
(3/8"-24 NF)
Description / Application
$99.95
PTO Over-Running Clutch (1-1/8 Female)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C670F
(1-1/8" - 6 x 1-3/8", 6 spline)
PTO Over-Running Clutch
(1-3/8" Female & Male)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C660F
(1-3/8" - 6 x 1-3/8", 6 spline)
Front wheel bolts, parts
Order #
PTO Gasket (For 1-1/8" & 1-3/8" PTO)
Fits: All Ford models (1939-64) except
Majors; 2000, 3000 (both w/ 4 speed
transmission) (1965 - 12/1970)
Replaces: C5NN747A USA made
PTO Shaft Cover Cap
Fits: 9N thru 4610 (1939-83);
Will not fit 2910, 3910
Replaces: 310088
PTO Cap (For 1-1/8" PTO)
Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700,
800, 900 (up to 1957)
Replaces: NCA726A
(3-1/2" o/a length, 2-5/8" thread)
NOTE: Cast iron. Original style.
PTO Oil Seal fits: Ford models (1939 & up),
9N, 2N, 8N, NAA, Jubilee, 501, 600, 700,
800, 900, 1801, 2000, 3000 series w/ 4, 6, 7, 8
speed transmission & Selecto speed, 3550,
4000, 2600, 3600, 4100, 4600, 2610, 3610,
4110, 4610, Replaces: 9N703B, 83944079
(2.45" O.D., 1-1/2" I.D., .650" wide)
NOTE: For 1-1/8" & 1-3/8" PTO shafts. Seal
may be narrower than original, but works
fine.
PTO Input Shaft Oil Seal
Fits: 5000, 5600, 5610, 6600, 6610, 6700, 6710,
7000, 7600, 7610, 7700, 7710, 8000, 8600,
8700, 9000, 9600, 9700 (All w/ 7 or 8 speed
transmission), Replaces: C5NN799A
(1.565" O.D., 1.125" I.D., .250" width)
Price
Description / Application
MFS1584
$1.95
Front Wheel Lug Nut
Fits: Some 8N w/ 1-1/16" hex lug nut &
19" rim, Replaces: S9512A
(1/2"-20 UNF, 1-1/16" hex head)
NOTE: 12 used per tractor;
Sold individually.
FDS287
$0.95
Front Wheel Lug Nut
Serviceable for 9N - TW30 (1939 & up)
Replaces: C5NN1012B
(1/2" - 20 UNF, 13/16" hex head)
USA made
FDS368
$6.75
EACH
Front Wheel Lug Nut
Fits: 9N, 2N (1939-47), Replaces: 9N1012
(1/2" - 20 UNF, 11/16" hex head)
USA made NOTE: 10 used per tractor;
Sold individually.
FDS288
$4.80
EACH
FDS286
$4.29
Front Wheel Stud only fits: 9N, 2N, 8N,
NAA, Jubilee, 501, 600, 700, 800, 900 series
(1939-56), Replaces: C5NN1107E
NOTE: Stud (1/2" x 20 UNF) is exact of
original.
ABC268
$1.50
Front Wheel Stud only
Fits: 501 thru 981, 2000 thru TW30, Dexta
(All w/ 2 wheel drive & regular front hub)
(1957 & up), Replaces: C5NN1107F
(1/2" - 20 UNF x 1-3/4" w/ serrated
shoulder, 1.747" useable length)
NOTE: 6 used per rim; Sold individually.
Front Wheel Stud Assembly w/ Nut
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900 series (1947-56) (.559" shoulder dia.)
NOTE: Stud (1/2" x 20 UNF) is exact of
original.
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
What is back spacing?
Front wheel hub, parts
Order #
Price
FDS285
$59.95
To determine back spacing lay your
wheel flat on the ground with the back
of the wheel facing up. Lay a straight
edge across the wheel & measure the
distance from the back side of the
mounting surface to the straight edge.
(I.E. The wheel pictured has a back
spacing of 3-5/8").
Description / Application
Front Wheel Hub
Fits: 8N, NAA, Jubilee
Replaces: 8N1104, NCA1104C
FDS295
FDS1787
ABC553
$20.95
$4.95
$10.95
Front Wheel Bearing Kit
Fits the following w/ NCA1104A hub,
(1954 -mid 1957) (up to SN 137818): 600,
700, 800, 900 series, Replaces: CBPN1200B
(1.938" O.D. outer race)
NOTE: 2 used per tractor;
Sold individually.
Front Wheel Bearing Kit
Fits the following w/ NCA1104B hub,
1957- 64 w/ regular axle, NOT H.D. axle:
501 thru 4000, Replaces: CBPN1200C
(1.781" O.D. outer race) USA made
NOTE: 2 used per tractor;
Sold individually.
Front Wheel Bearing Seal
Fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800,
900, 2000 4-cyl., 4000 4-cyl. series (1939-64)
Replaces: NCA1190A, 9N1190B
(2.684" O.D., 1.985" I.D., .322" wide)
Front Hub Cap only
Fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800,
900, 2000 4-cyl., 4000 4-cyl. series, Dexta,
Super Dexta (1939-64) (All w/ regular
front axle not heavy duty axle)
Replaces: 2N1139B, 957E1139
(2"-24 thread size, 1.670" tall)
NOTE: Stamped steel. Exact of original.
Front wheels / rims
NOTE: To determine the width of Wheels / Rims:
Measure the inside (bead to bead) not outside to outside.
Order #
Price
FDS071
$49.30
FDS220
$131.50
FDS221
$112.50
WHS022
$71.50
WHS042
$65.60
WHS070
$86.45
WHS043
$82.75
Wheel clamp lock nut
Fits: 9N thru 6000
(3/4"-16 UNF thread)
Description
Order # Price
Front Wheel Clamp Lock Nut................................ ABC254.........$19.50
(For Axle Shaft & Front Wheel)
NOTE: No re-threading necessary on worn shafts. Check size
before ordering.
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Description / Application
Front Rim (Blank)
Fits: 9N, 2N, 8N (1939-52)
(3" x 19"; 17-3/8" I.D.)
USA made NOTE: Remove center from
old rim & weld into new blank rim.
Front Wheel (5 Bolt)
w/ Large 9-5/8" Pilot Hole
Fits: 9N, 2N (1939-47)
Replaces: 9N1015A
(3" x 19")
Chassis parts
ABC1310
$19.95
Front Wheel Bearing Kit
Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54)
Replaces: CBPN1200A
NOTE: Kit includes: (2) bearing cones,
(2) bearing cups & (1) oil seal. 2 used per
tractor; Sold individually.
Ford
FDS1791
$30.50
Front Wheel (6 Bolt) w/ Small Center
Fits: 8N (1947-52)
Replaces: 8N1015A, C5NN1015A
(3" x 19")
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some 8N thru 7910 series
Replaces: 8N1015D, 82006575, 87389515
(4.5" x 16", Pilot hole = 4.625", 6" bolt circle,
4" back spacing) USA made
NOTE: For 5:50 x 6:00 x 16" tires.
Front Wheel (6 Lug)
Fits: Some 3230 - 7710 & others
Replaces: 82006576, C5NN1007D
(6" x 15", 6" bolt circle, 4.625" pilot hole,
4-3/4" back spacing) USA made
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Ford models
Replaces: 820050054, 86402377,
D6NN1007B (8" x 15", 6" bolt circle, 4.625"
pilot, 4-3/4" back spacing) USA made
Front Wheel (6 Lug) w/ (4) Wheel Weight
Holes fits: Some 2310 - 9700 & others
Replaces: 82005056, C5NN1007A
(6" x 16", Pilot hole = 4.625", 6" bolt circle,
4-3/4" back spacing) USA made
191
Tires, tubes
NOTE: Tubes are for BIAS ply
tires only, not for radial tires.
Also not for recreational
use. Need a tire or tube not
Rear rim bolts, parts
Order #
Price
FDS1201
(Stud)
$7.50
EACH
FDS1211
(Nut)
$1.30
EACH
FDS1211 Replaces: 33806S7, 81871950
(5/8"-18 thread) USA made
NOTE: 12 required per tractor;
Sold individually.
FDS394
(Stud)
$2.20
EACH
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 1801, 2000, 2600, 2610, 2810, 2910, 3000,
3610, 3910, 4000 4-cyl.
FDS394 Replaces: 312696
(5/8"-18 thread x 1-5/8) USA made
ABC386
(Nut)
$1.70
EACH
ABC386 Replaces: 8N1134
(5/8"-18 thread) USA made
NOTE: 16 required per tractor; Sold
individually. For 2600-up check thread
size.
MIS061
$3.65
MIS063
$3.75
Rear Rim Bolt Assy. w/ Nut & Washer
Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600,
700, 800, 900, 2000, 3000, 4000 w/ 28" rear
rims
MIS061: (3-1/2" NC hex head bolt w/
washer)
Chassis parts
Ford
listed? Call technical service.
Order #
Price
WHS047
$91.95
Description / Dimension
Triple rib, 6 ply, Tire only
(5.50 x 16")
WHS048
$105.75
Triple rib, 4 ply, Tire only
(6.00 x 16")
WHS049
$110.95
Triple rib, 6 ply, Tire only
(6.50 x 16")
WHS050
$15.25
Tube only
(For 5.50, 6.00, 6.50 x 16" Tires)
FDS089
$68.95
Multi rib, 4 ply, Tire
Fits: Ford models (4 x 19")
FDS056TU
$15.75
Tube only (For FDS089 Tire)
WHS060
$37.95
EACH
Rear Tube only
(For 7.50, 8.3, 9.5 x 24" Tires)
WHS059
$53.75
EACH
Rear Tube only
(For 11.2, 12.4 x 24" Tires)
WHS058
$56.55
EACH
Rear Tube only
(For 11.2, 12.4 x 28" Tires)
WHS061
$80.25
EACH
Rear Tube only
(For 13.6, 14.9 x 28" Tires)
WHS062
$56.95
EACH
Rear Tube only
(For 9.5 x 32" Tires)
WHS063
$64.95
EACH
Rear Tube only
(For 11.2, 12.4 x 34" & 36" Tires)
WHS064
$65.25
EACH
Rear Tube only
(For 11.2, 12.4 x 38" Tires)
WHS2513
$89.95
EACH
Rear Tube only (For 12.00 x 38", 13.00 x
38", 13.6 x 38", 14.00 x 38", 14.9 x 38",
15.5 x 38" tires)
Rear tire inner tube valves, nut
Order #
Price
ABC531
$5.15
EACH
ABC384
ABC385
192
$5.15
EACH
$1.50
EACH
Description / Application
Rear Tire Inner Tube Valve
(Air / Water Valve) (New Style)
Fits: Tractor tubes w/ Internal threads
NOTE: Sold individually.
Rear Tire Inner Tube Valve
(Air / Water Valve) (Old style)
Fits: Tractor tubes w/ External threads
NOTE: Sold individually.
Brass Nut
(For Rear Tire Inner Tube Valve)
NOTE: Sold individually.
Description / Application
Fits: 9N, 2N (1939-47)
FDS1201 Replaces: 9N1117
(5/8"-15 NF thread, 1.875" o/a length)
MIS063: (5/8 x 18 x 2-1/2" NF Carriage
bolt) USA made
NOTE: 6 used per rim; Sold individually.
MIS121
$0.50
Flat Washer only (For MIS063)
(5/8" I.D.) NOTE: Can also be used
behind the lug nut on 9N & 2N. 6 needed
per wheel; Sold individually.
Rear rims / wheels
NOTE: To determine the width of Rims / Wheels: Measure
the inside (bead to bead) not outside to outside.
Order #
Price
WHS016
(9" x 28")
$148.05
WHS004
(10" x 28")
$155.00
WHS012
(11" x 28")
WHS013
(12" x 28")
Description / Application
Rear Rim (6 Loops)
Fits: Some 9N thru 2000 series &
others
$164.95
WHS016 Replaces: NCA1020C,
D9NN1050BA
$178.95 WHS004 Replaces: NCA1020B,
CONN1050F
WHS012 Replaces: C5NN1050E
WHS013 Replaces: D9NN1050EA
USA made NOTE: Back spacing
on loops = 3-1/2" & 7-3/4".
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Mounting wedge
Rear rims / wheels cont...
Order #
Price
Description / Application
WHS1613
$235.95
Flat Base Rear Rim (Blank Center)
(For Stamped Steel 9 Bolt Pattern Rims)
Fits: Ford models
(10" x 38") USA made
NOTE: Bare finish. Customer must reuse
old center. Must weld or rivet.
NOTE: Stop holes are angled.
Price
WHS007
(12" x 26")
$420.75
ACS028
(11" x 28")
MIS108
MIS109
$450.50
$16.50
$14.95
Rear Spinout Rim (4 Rails)
Fits: Some 2000 3-cyl. - 4110 series
USA made NOTE: Stop holes are
angled, Rails are drilled for both
style stops (1 rail for MIS109 & 1
rail for MIS108).
Rear Spinout Rim Stop (For 90° Drilled
Rim Rail) fits: Ford models (1965 & up)
Replaces: E5NN1057BA USA made
NOTE: Will not fit the rims that we sell.
Rear Spinout Rim Stop (Parallel Drilled)
Fits: Ford models (1965 & up)
Replaces: C0NN1057A
NOTE: Use MIS109 for the listed
spinout rims.
MIS110
$8.95
Stop Bolt (For Rear Spinout Rim Stops)
Replaces: C0NN1058A, 81811263
USA made NOTE: Sold individually.
Rear wheel flange nut
Fits: 8N, NAA, Jubilee, 501, 600, 700, 800,
900, 2000, 4000 4-cyl. series (1947-64); 3000
(1965 & up), Replaces: 8N1132A2
(1-1/16" hex, 5/8"-18 UNF x 2.650)
Description
Drawbars, parts
Price
Order # Description / Application
FDS208
$129.90 Swinging Drawbar Assembly w/ Hanger/
FDS302
$163.00
FDS306
$55.00
FDS303
$52.55
FDS304
$59.50
ABC435
$50.25
FDS305
$4.90
Bracket & Clevis Assembly fits: 9N, 2N,
8N, NAA, Jubilee, 600, 601, 2000 4-cyl.
series (thru 64) except Row Crop
NOTE: Verify that 9N’s rear end housing
has (4) tapped holes under the rear end
housing before ordering. Mounting bolts
sold separately, order ABC2271.
Swinging Drawbar Assembly w/ Hanger/
Bracket & Clevis Assembly fits: 800, 1801,
4000 series 4-cyl. (thru 64) except Row
Crop & Grove NOTE: Mounting bolts
sold separately, order ABC2271.
Swinging Drawbar
Fits: Same as FDS208, FDS302
Replaces: C0NN805F, 86531346
Hanger / Bracket
Fits: Same as FDS208
Replaces: NCA809A
Hanger / Bracket
Fits: Same as FDS302
Replaces: NDA809A
Clevis w/ Pin
Fits: Same as FDS208, FDS302
Replaces: NCA803B USA made
Clevis Pin w/ Lynch Pin
Fits: Same as FDS208, FDS302
Replaces: 8N804
NOTE: Only fits aftermarket bracket.
ABC2271 $8.95
Swinging Drawbar Bolt Kit
Fits: 9N thru 4000 series (4-cyl.) (1939-64)
NOTE: Includes 8 bolts & lock washers.
Fits FDS208 & FDS302 Assys.
FDS022
$46.95
Standard Drawbar Category 1
Fits: Ford models, Replaces: 9N5182A
(1" x 2-1/2" x 26", 7/8" pin size)
FDS211
$29.99
Price
Rear Wheel Flange Nut........................................... FDS118..........$11.00
NOTE: Used to add pie weight plate or to "Direct Dual."
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
Drawbar Lock Category 1
(For FDS022)
Replaces: 9N5182L
193
Chassis parts
WHS008
(13" x 28")
Rear Spinout Rim (4 Rails)
Fits: Some 2000 3-cyl. - 4110 series
(1965 & up), others
Replaces: C5NN1050J
USA made
Price
Ford
Rear Spinout Rim (4 Rails)
Fits: Ford models (1965 & up)
$420.00 WHS007 Replaces: C5NN1050H
USA made
NOTE: Stop holes are angled.
$435.00
Order # Mounting Wedge (For Rear 3-Piece Weight)....... FDS150..........$8.50
NOTE: 6 needed per wheel; Sold individually.
Description / Application
ACS028 Replaces: C5NN1050H
USA made NOTE: These are not
PAD style rims.
ACS026
(12" x 28")
Description
Order #
Rear spinout rims, parts
Order #
Fits: 8N, NAA, Jubilee, 501; 600, 700, 800,
900, 2000, 3000 w/ conventional 6-loop
rims not spin out rims
3-point hitch parts
Order #
Price
FDS023
$23.50
FDS346
$39.45
Chassis parts
Ford
FDS159
$69.95
3-point hitch parts cont...
Order #
Price
FDS392
$94.95
3-Point Leveling Box Assembly
Fits: 600, 800, 1801, 2000, 2600, 2610, 3000,
3400, 3500, 3600, 3610, 4000 4-cyl., 4110
series, Replaces: NCA577A, NCA585B,
E0NN569AA
(21-3/4" to 25" total adjustment)
FDS350
$3.75
3-Point Leveling Box Pin (For FDS028,
FDS219, FDS392) fits: 9N, 2N, 8N, NAA,
Jubilee, 541, 600, 700, 800, 900, 1801, 2000
4-cyl., 4000 4-cyl. series, Dexta, Super
Dexta (thru 64), Replaces: 9N595
(2-3/4" useable length x 5/8" dia.)
USA made
ABC302
$7.75
Eyelet Assembly Kit w/ Nut & Lock
Washer (For Sway Chain) fits: 9N, 2N,
8N, NAA, Jubilee, 501, 600, 700, 800, 900,
Dexta, Super Dexta, 1801, 2000, 3000, 3600,
3610, 4000 4-cyl. series, Replaces: NCB660A
USA made NOTE: Kit includes: Eyelet
assembly, nut & lock washer.
FDS274
$47.75
Drawbar Check Chain Kit fits: 9N, 2N,
8N, NAA, Jubilee, 501, 600, 700, 800, 900,
Dexta, Super Dexta, 1801, 2000, 2600, 2610,
3000, 3600, 3610, 4000 4-cyl. series NOTE:
Kit includes: RH / LH anchors, (2) eyelets,
(2) chains, (4) clevis w/ pins & hardware
FDS206
$57.95
3-Point Lower Lift Arm fits: 9N, 2N, 8N,
NAA, Jubilee (1939-54), Replaces: 9N555,
9N556 (Lower lift arm w/ forged balljoint ends, Category 1 accommodates
7/8" drawbar or lower link pins, 32" hole
centers) NOTE: Red primer.
FDS383
(LH)
$94.95
FDS386
(RH)
$94.95
3-Point Lower Lift Arm
Fits: 501, 600, 700, 800, 900, 1801, 2000 (3 &
4-cyl.), 2310, 2600, 2610, 2910, 3000, 3600,
3610, (4000 4-cyl. series) (1954 & up)
FDS383 Replaces: D0NN555C, C5NN556AF
FDS386 Replaces: D0NN555D, C5NN555AN
(Category 1 - accommodates 7/8" drawbar
or lower link pins, 31-5/8" c.c. ball)
FDS2059
$1.45
Fork (For FDS028) fits: 9N, 2N, 8N, NAA,
Jubilee, Dexta, Super Dexta, Replaces:
9N585A (9-3/4" o/a length, 3/4" UNC
thread, 1/2" between ears)
Lower 3-Point Pin Support Plate Gasket
Fits: 9N SN: 6019 & up, 2N (mid 1939 - 47)
Replaces: 9N523B USA made
NOTE: Mounts under axle housing.
2 used per tractor; Sold individually.
FDS465
$28.95
Outer Hydraulic Lift Rockshaft Arm
Fits: 9N thru Jubilee; Serviceable for 501
thru 4000 4-cyl. (1939-64)
Replaces: 9N543B (1.80" I.D., 37 splines)
3-Point Lower Lift Arm Support Pin
w/ Nut, Washer & Cotter Key
Fits: 9N, 2N (1939-47)
Replaces: 9N563
FDS462
$25.15
3-Point Lower Lift Arm Support Pin
Fits: 8N, NAA, 501, 600, 700, 800, 900, 1801,
2000 3 & 4-cyl., 3000, 3600, 4000 3 & 4-cyl.,
4600 (1947-81) (All w/out differential lock)
Replaces: NCA563C USA made
Description / Application
Top-Link Category 1
Adjustable w/ forged ends & 3/4" hole
Fits: Ford models
(16" tube length)
Top-Link Category 2
Adjustable w/ forged ends & 1" hole
Fits: Ford models
(16-3/4" tube length)
Top-Link Bracket (Hydraulic Lift Rocker)
Fits: 8N, NAA, Jubilee, 600, 800, 2000, 4000
4-cyl. (1947-64), Replaces: NCA535A
NOTE: Drilled for a 1" pivot pin. Measure
pivot pin before ordering.
ABC1431
$1.90
3-Point Top-Link Pin
Fits: Ford models w/ a Category 1
3-point hitch (3/4" O.D., 2-3/4" usable
length, 4-5/8" o/a length)
ABC1427
$3.25
Category 1 3-Point Top Link Pin
Fits: Ford models w/ a Category 1
3-point hitch (3/4" O.D., 4-3/4" usable
length, 6-1/2" o/a length)
Category 2 3-Point Top Link Pin
Fits: Ford models w/ a Category 2
3-point hitch (1" O.D., 4-1/4" usable length,
6" o/a length)
ABC1429
$4.25
MIS119
$0.35
3-Point Lynch Pin fits: Ford models
equipped w/ a 3-point hitch using a .420"
dia. pin, Replaces: 87299410
(1-5/8" usable length)
ABC1433
$2.15
3-Point Lift Arm Category 2 to a Category
1 3-Point Hitch Reducer Bushing
Fits: Ford models w/ a Category 2, 3-point
hitch switching to a Category 1, 3-point
hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a
length)
FDS028
FDS367
FDS475
FDS219
194
$79.95
$24.75
$83.85
$52.75
3-Point Leveling Box Assembly
Fits: 9N, 2N, 8N, NAA, Jubilee, Dexta,
Super Dexta, Replaces: 8N577A
(Closed length = 17-1/2" - top pin to
bottom pin)
LH Leveling Rod
Fits: 9N, 2N, 8N, NAA, Jubilee, Dexta,
Super Dexta, Replaces: 9N564B
(19" c.c. pin holes)
Description / Application
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
3-point hitch parts cont...
Order #
Price
ABC2010
$24.00
FDS024
$64.50
Description / Application
Adjustable Stabilizer Bar (For tractors
w/ Category I 3-point) Adjustable from
27-1/2" to 37" length, 23" center tube
length, 7/8" threaded ends, 7/8" pin holes
NOTE: Adjustable ends for desired
length. Normally 2 used per tractor;
Sold individually.
Stabilizer Kit fits: 9N, 2N, 8N, NAA,
Jubilee, 600, 800, 2000 3-cyl. & 4-cyl., 3000,
4000 4-cyl. series Category 1
NOTE: Primed red. Flat bars not
turnbuckles. Kit includes (2) arms,
(2) brackets, pins.
ABC2366
ABC2357
Description
Order # Price
Blue Deluxe Umbrella w/ Brackets ....................ABC2366........$192.80
White Deluxe Umbrella w/ Brackets .................ABC2362........$192.80
Red Deluxe Umbrella w/ Brackets .....................ABC2357........$192.80
Mylar decals - USA made
INSTRUCTIONS: Have the pitted area filled, sanded smooth
& painted. Paint must be completely dry prior to installation
(usually 3 - 4 weeks). Wash area with soap & water (new paint
included) on which decal is to be placed.
FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to
border of design where possible prior to removing white
backing paper. Lightly spray the area with window cleaner (do
not use window cleaner in aerosol can). Peel white backing
paper from decal and place in position. Squeegee window
cleaner from under decal beginning in center and working
outward. If air bubbles occur, puncture with pin & smooth
down. Please note: These decals have been printed on a tough
mylar film using mylar ink. A pressure sensitive adhesive
has been employed on the back of the mylar to insure good
adhesion to any clean, hard surface.
DEC393
DEC194
Order #
Price
Application
DEC292
$2.00
DEC232
$26.50
DEC442
$40.75
9-Piece Complete Set w/ decal placement
instructions for NAA, Jubilee (1953-54)
DEC388
$21.00
501 Offset Workmaster
DEC362
$21.00
541 Offset Workmaster
DEC332
$12.75
600
DEC443
$52.15
600 (1954-57) NOTE: Does not include
Powermaster or Workmaster decal.
DEC445
$63.50
601 series (1958-62)
NOTE: Includes Workmaster decals.
DEC338
$21.00
601 Workmaster
DEC333
$12.75
640
DEC299
$21.00
641 Workmaster
DEC334
$12.75
650
DEC344
$12.75
660 (1954-57)
DEC405
$25.00
661 Workmaster
DEC389
$20.00
661 Select-O-Speed
DEC408
$30.00
671 Select-O-Speed
DEC347
$12.75
740 (1954-57)
DEC437
$25.00
741 Workmaster
DEC410
$25.00
771 Select-O-Speed
DEC444
$52.15
800 (1954-57) NOTE: Does not include
Powermaster or Workmaster decal.
DEC335
$12.75
800
DEC446
$63.50
801 - 861 series (1958-62)
NOTE: Includes Powermaster decals.
DEC295
$21.00
801 Powermaster
DEC363
$30.00
801 Select-O-Speed
DEC391
$25.00
841 Diesel
DEC300
$21.00
841 Powermaster
DEC337
$12.75
850
DEC297
$21.00
851 Powermaster
DEC346
$12.75
860 (1954-57)
DEC393
$25.00
861 Diesel
DEC360
$21.00
861 Powermaster
Ford Script decal (1-Piece)
(1-3/4" tall x 7" long)
10-Piece Complete warning & misc. decals,
including hood and fender decals for 9N,
2N, 8N (1939-52)
Chassis parts / Miscellaneous
ABC2362
Four oil-tempered spring steel bows are
locked into place with individual spring
clips, providing ease of operation and
a rigid framework for the cover. Frame
constructed of tubular steel. All metal
parts, including frame and mounting
brackets, zinc plated for rust resistance
and lasting appearance. 54" square cover
is made of durable polyester material.
Each corner is double reinforced and
has heavy steel grommets. Complete
with universal mounting bracket. Can
be mounted on side of fender, rear end /
axle housing, foot platform.
DEC292
Ford
Deluxe tractor umbrellas
C aution: Inspect all decal pieces before applying to tractor.
NO REFUNDS on mylar decals if applied to surface and/or if
damaged. NO REFUNDS on vinyl cut decals. Store in a cool,
dry place. Do not soak in water.
Decals continue on next page
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
195
Miscellaneous
Ford
Mylar decals - USA made cont...
I & T Shop Service™ manual - Printed in USA
cont...
Order #
Price
DEC365
$30.00
Application
871 Select-O-Speed
DEC404
$30.00
881 Select-O-Speed
DEC348
$21.00
901 Powermaster
DEC342
$12.75
960
DEC361
$21.00
961 Powermaster
DEC364
$30.00
971 Select-O-Speed
DEC396
$30.00
981 Select-O-Speed
DEC399
$25.00
961 Diesel
DEC429
$25.00
2000 (before 1965)
DEC193
$29.95
2000 (1965-68) 3-cyl.
DEC197
$32.50
2000 (1968 & up) 3-cyl.
DEC201
$28.95
2600 (1968 & up)
DEC194
$29.95
3000 (up to 1968)
DEC198
$28.75
3000 (1968 & up)
DEC430
$25.00
4000 (before 1965)
DEC195
$30.60
4000 (1965-68) 3-cyl.
DEC199
$28.75
4000 (1968 & up)
apart, how to fix it and how to put it back together again.
DEC451
$9.20
Transmission Shift Pattern decal (1-piece)
Replaces: C5NN7B292
(3-15/16" x 5-1/4")
dealer’s shop service department, and was not sent or given to
DEC196
$28.20
5000 (up to 1968)
DEC200
$28.75
5000 (1968 & up)
DEC211
$54.35
7000
Order #
Price
Application
FO42
$31.95
Series 5000, 5600, 5610, 6600, 6610, 6700,
6710, 7000, 7600, 7610, 7700, 7710
NOTE: Includes electrical wiring diagram.
FO201
$34.95
Ford Collection: Models Fordson Dexta,
Fordson Super Dexta, 2000 Super Dexta,
New Performance Super Dexta, models
Fordson Major diesel (FMD), Fordson Power
Major (FPM), Fordson Super Major (FSM)
New Performance Fordson Super Major
(New FSM), 5000 Super Major, series 6000,
Commander 6000, series 1000 & 1600, series
8000, 8600, 8700, 9000, 9600, 9700, TW10,
TW20, TW30
Service / Operator's manual reprints
Printed in USA
A Service Manual Reprint tells you how to take the tractor
It is a reprint of the manual that the factory furnished the
individual retail customers. It deals with repairs in the language
of a mechanic. Often times it includes valuable information
as to specifications, torques, etc. A service manual reprint will
offer many short cuts and save you time!
An Operator’s Manual (reprints only) sometimes referred to as
the Owner’s Manual is the manual that came with the tractor. It
is the manual that was given to the ultimate consumer by the
I & T Shop Service™ manual - Printed in USA
manufacturer. It can be compared to the manual you receive
An I & T Shop Service™ Manual tells you how to take a tractor
apart, how to fix it and how to put it back together again. These
are authentic manuals that deal with repairs in the language of
a mechanic with an easy to use format. They include valuable
in the glove box of a new car. This manual gives the owneroperator instructions, shift patterns, capacities (anti-freeze,
crankcase, etc.) and adjustment procedures (brakes, clutch, etc).
This is a very useful and valuable tool in operating your tractor.
information as to specifications, torques, etc. illustrated by
exploded views and photos. If you are in serious repairs or
restoration, you need an I & T Shop Service™ Manual. It will offer
many short cuts and save you time!
FO4
Order #
FO19
Price
FO20
FO31
9N, 2N, 8N
NOTE: Includes electrical wiring diagram.
FO19
$31.95
NAA
FO20
$31.95
Series 501, 600, 601, 700, 701, 800, 801, 900,
901, 1801, 2000 4-cyl., 4000 4-cyl.
NOTE: Includes electrical wiring diagram.
196
REP1142
REP1146
REP087
BOK061
BOK040
REP1681
REP1685
REP1369
FO42
$31.95
$31.95
BOK064
Application
FO4
FO31
BOK063
Series 2000 3-cyl., 3000 3-cyl., 4000 3-cyl.
(Covers models prior to 1975)
NOTE: Includes electrical wiring diagram.
Order #
Price
Application
BOK063
$18.00
9N, 2N (1939-47) NOTE: Includes
electrical wiring diagram.
BOK064
$15.00
8N (1947-52) NOTE: Has very limited
information on engine service.
Service manual reprints
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
Service / Operator's manual reprints cont...
Order #
Price
Application
Service manual reprints cont...
REP1142
$14.75
NAA, Jubilee
REP1146
$24.30
600, 601, 700, 701, 800, 801, 900, 901, 1801
series gas, LP, diesel NOTE: Includes
electrical wiring diagram.
REP087
$34.95
Sherman Transmission Over-Under,
Reversing, Live PTO
REP1139
$14.75
Fordson Major
BOK065
Order #
Price
BOK065
$20.00
BOK1313 $29.95
Operator's manual reprints
$15.00
9N, 2N (1939-47) NOTE: Includes
electrical wiring diagram.
REP1446
$18.95
9N, 2N NOTE: This manual explains
basic tractor operation, Ferguson system,
21 different Ferguson implements &
accessories.
$15.00
8N (1947-52) NOTE: Includes electrical
wiring diagram.
BOK062
$15.00
NAA (1953-54)
REP1681
$14.95
600 series, 800 series gas, LP w/ 4 or 5
speed transmission (1954-57)
REP1679
$14.95
601 series, 801 series gas, LP w/ 4 or 5
speed transmission (1958-62)
REP1685
$14.95
700, 740, 900, 950, 960 gas, LP w/ 4 or 5
speed transmission (1954-57)
REP1683
$14.95
701 series, 901 series gas, LP w/ 4 speed or
Select-o speed transmission
REP1369
$14.95
2000 3-cyl., 3000, 4000 3-cyl., 5000 (1965 &
up) All Purpose & LCG gas, diesel
REP1342
$42.90
Ford/Dearborn Farm Equipment
(Beginning in 1939)
NOTE: This manual contains almost
900 pages of assembly, operations, part
numbers, and maintenance!
REP2643
$14.95
Char-Lynn Power Steering (Owner's
manual) NOTE: Includes installation,
operation, maintenance & trouble
shooting information on the pump &
torque generator.
9N - Jubilee (1939-54)
NAA, 501, 600, 700, 800, 900, 1801 (1953-59)
gas, diesel, LP
Engine rebuild video - USA made
Shows how to completely rebuild the
tractors' engine. You will see the engine
disassembled down to the bare block
and then rebuilt step by step is an easy
format.
Tune-up video - USA made
Miscellaneous
BOK040
Application
Ford
BOK061
BOK1313
Includes rebuilding the carburetor and
distributor, oil and filter change, brake
adjustment and more!
Hydraulic repair video
USA made
Will help determine what is causing
hydraulic problems and shows how to
make the necessary repairs or completely
rebuild the round, piston type, hydraulic
pump.
VHS Videos are on CLOSE OUT and may be unavailable.
D = DVD (Replacing the VHS videos)
Order #
Price
VID01D
$20.00
9N, 2N, 8N (Engine Rebuild)
VID04D
$20.00
NAA, Jubilee, 600, 700, 800, 900 series, 2000
4-cyl., 4000 4-cyl. (Engine Rebuild)
VID02D
$20.00
9N, 2N, 8N (Tune-Up)
VID05
$18.00
Parts manual reprints - Printed in USA
VID05D
$20.00
NAA, Jubilee, 600, 700, 800, 900 series, 2000
4-cyl., 4000 4-cyl. (Tune-Up)
A Parts Manual (reprint only) has exploded views of all parts
VID03D
$20.00
Fits: 9N, 2N, 8N; Ferguson 20, 30 series
(Hydraulic Repair)
VID18D
$20.00
NAA, Jubilee, 600, 700, 800, 900 series, 2000
4-cyl., 4000 4-cyl. (Hydraulic Repair)
on the tractor. With numbered pictures giving you great detail
on assembly and disassembly. It also gives you a guide, with
numbers, for ordering parts, and makes you seem much more
informed when talking with a dealer. Many service manuals,
Application
after telling you how to disassemble & repair in detail, will
simply say "reassemble". If you have your PTO in the wash tank,
in pieces, without notes, you have a problem. The parts manual
can help you out with an exploded view of the PTO unit, and
you can see immediately how it all goes back together. You
need a parts manual!
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
197

Similar documents

A brief history about Ford

A brief history about Ford bolts...................................................164 hold downs............................163, 164 retainer.............................................164 rod............................

More information

Ford 4 - Steiner Tractor Parts

Ford 4 - Steiner Tractor Parts belts..................................................... 156 bolt kit................................................ 169 brackets....................................168, 169 conversion kit...

More information

Case - Steiner Tractor Parts

Case - Steiner Tractor Parts Caps air cleaner................................. 93, 94 distributor....................................... 85 fuel.............................................. 95, 96 magneto...................

More information

Minneapolis Moline - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts riveting tools.....................................535 spring...................................................535 C Caps air cleaner...........................................528 distributo...

More information

Allis Chalmers - Steiner Tractor Parts

Allis Chalmers - Steiner Tractor Parts carburetors............................................16 discs.........................................................17

More information

Four Generations - Steiner Tractor Parts

Four Generations - Steiner Tractor Parts choke disc...................................197 choke lever................................ 195 B elbows.........................................196 Battery Boxes....................... 212 ...

More information

Minneapolis Moline - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts spring.................................................563 Bull pinion shaft seal.......................563 C Caps air cleaner................................555, 556 distributor..................

More information

Allis Chalmers - Steiner Tractor Parts

Allis Chalmers - Steiner Tractor Parts STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm

More information

1 Allis Chalmers A C Allis Chalmers

1 Allis Chalmers A C Allis Chalmers bracket kits........................................32 mounting kit.....................................32 pulleys..........................................31, 32 Amp gauges......................

More information