1 Allis Chalmers A C Allis Chalmers

Transcription

1 Allis Chalmers
Allis Chalmers farm tractors were in production from 1914 through 1985.
In 1985, Deutz acquired the Allis Chalmers brand and then sold it to AGCO
in 1990. In an effort to preserve America’s agricultural heritage, Steiner
Tractor Parts offers many restoration quality components for collectors
and enthusiasts of these machines.
View more pictures & tractor
stories in our digital book!
www.SteinerTractor.com >
Steiner Community >
Tractor Stories
Photos submitted by folks just like you!
A. "Allis Chalmers WD45 with Roto-baler" Howard Walhof, Bozeman, MT
B. "Allis Chalmers CA - Contest Entry" Duane Isackson, Sammamish, WA
C. "The Rover in the Clover" Amos Miller, Cassopolis, MI
D. "An AC Family" Jerry Wills, Celina, OH
E. "1949 WD Allis Chalmers" Riley Hanson, Holmen, WI
Our complete album can be viewed at
http://www.steinertractor.com/tractor-photo-winners.html
A
C
D
B
E
A
Air cleaner parts........................... 37 - 38
caps......................................................37
clamps........................................ 37 - 38
filter element....................................37
hoses.......................................... 37 - 38
oil cups................................................37
pipes....................................................37
pipe bracket......................................37
pipe grommet..................................37
Alternators, parts......................... 31 - 32
bracket................................................32
bracket kits........................................32
mounting kit.....................................32
pulleys..........................................31, 32
Amp gauges...........................................21
Axle, parts...................................... 53 - 54
bearing...............................................53
gaskets................................................54
seals.....................................................53
B
Battery boxes, parts.................... 24 - 25
bracket set.........................................24
hold down.........................................25
j-bolt....................................................25
lid..........................................................24
side cover...........................................24
Battery cables........................................24
Brake parts..................................... 52 - 53
adjusting screw................................52
anchor shoe pin...............................53
band.....................................................52
drums..................................................52
pedal shaft & bushing...................52
pin.........................................................52
riveting tools.....................................52
shoes...................................................52
shoe lining sets................................52
springs....................................... 52 - 53
Book..........................................................61
C
Caps..............................11, 12, 14, 19, 26,
...................................28, 37, 39, 40, 48
air cleaner..........................................37
distributor..........................................26
engine.................................................11
magneto.............................................28
oil fill / breather...................... 11 - 12
power steering pump....................48
radiator...............................................19
rain.......................................................14
fuel.............................................. 39 - 40
power steering reservoir..............48
Carburetors, parts....................... 15 - 18
adjustment needle assy................15
bushing...............................................15
discs.....................................................15
elbow & strainer assy.....................15
floats....................................................16
gaskets��16
needle float valves..........................15
nozzles................................................15
repair kits.................................. 17 - 18
Choke parts................................... 14 - 15
cable....................................................14
clip........................................................15
rod........................................................14
C
Chrome exhaust stacks......................14
Cigarette lighters..................................25
Clutch, trans. parts...................... 42 - 43
alignment tool.................................43
bushings.............................................43
dipstick...............................................43
disc.......................................................42
flywheel cover..................................43
fork.......................................................43
inspection cover plates..........42, 43
kits........................................................42
main shaft drive gear.....................43
pressure plate...................................42
return springs............................42, 43
throw out bearings..................42, 43
seal.......................................................43
shaft.....................................................43
pinion shaft gears...........................43
3rd / 4th shift fork...........................43
Control lever knob...............................44
Coils.............................................25, 28, 50
Crank hole casting...............................35
Crankshafts, parts........................ 10 - 11
bearings..................................... 10 - 11
seals.....................................................11
Crankshaft pulleys................................10
D
Dash light, parts....................................33
bulb......................................................33
cover....................................................33
Data book................................................61
Decals.......................................................60
Dipstick....................................................43
Distributor parts.......................... 25 - 27
caps......................................................26
clamp...................................................26
clips......................................................26
coils......................................................25
dust covers........................................26
gasket..................................................26
grommet............................................27
loom holder......................................27
resistor................................................26
rotor button......................................27
spark plugs........................................27
spark plug wire sets.............. 26 - 27
tags.......................................................26
terminal insulator assys................25
tune-up kits.......................................27
Drawbars, parts.....................................59
bars......................................................59
bushing...............................................59
guide assy..........................................59
hanger.................................................59
lock.......................................................59
repair kit.............................................59
spring..................................................59
yoke assembly..................................59
DVDs.........................................................62
E
Electric outlet socket, parts..............24
boot.....................................................24
connector plug................................24
Allis Chalmers: Alphabetical Index
www.SteinerTractor.com
E
Electrical panels....................................23
Emblems / nameplates................35, 46
clip........................................................35
rivet......................................................35
Engine gasket sets................................. 8
Engine oil cap........................................11
Engine overhaul kits.............................. 8
Engine side panels...............................36
Exhaust elbows....................................... 7
Exhaust pipes.........................................14
Exhaust stacks.......................................14
H
Headlights, parts cont...
bulbs.............................. 341, 342, 343
gaskets....................................341, 342
lens...........................................341, 342
reflector��341, 342
ring.......................... 33, 341, 342, 343
visor.....................................................33
washer.............................................. 343
Hoods.......................................................36
Hydraulic dipstick.................................43
Hydraulic oil filter.................................53
F
Fan belts...................................................20
Fan blade.................................................20
Fenders.....................................................50
Flywheel ring gears.................... 12 - 13
Fuel filters................................................41
element..............................................41
screen..................................................41
Fuel lines..................................................41
Fuel tank, parts............................. 39 - 41
caps............................................. 39 - 40
filler neck straightening tool.......39
gaskets................................................40
screen..................................................41
webbing.............................................39
Fuse Holder.............................................25
I
Ignition parts................................ 25 - 27
caps......................................................26
clamp...................................................26
clips......................................................26
coils......................................................25
dust covers........................................26
gasket..................................................26
grommet............................................27
key........................................................30
loom holder......................................27
resistor................................................26
rotor button......................................27
spark plugs........................................27
spark plug wire sets.............. 26 - 27
switch..................................................30
tags.......................................................26
terminal insulator assys................25
tune-up kits.......................................27
Inner tube valves..................................57
nut........................................................57
Instrument panel trim........................23
G
Gauges............................................ 21 - 23
amp......................................................21
oil pressure............................... 21 - 22
tachometers............................. 22 - 23
traction booster gauge.................23
water temperature.........................22
Gear shift boots��45
Gear shift knobs........................... 44 - 45
Gear shift lever, parts..........................44
pins.......................................................44
washer & snap ring kit...................44
Gears......................................... 12 - 13, 43
flywheel ring............................ 12 - 13
transmission......................................43
Generator parts............................ 30 - 31
band cover.........................................31
belt.......................................................30
brackets..............................................30
cut-out assembly............................30
tags.......................................................31
Governor springs..................................18
Grille mounting tabs...........................35
Grille screens��36
H
Hand clutch lever.................................51
Hand cranks��35
brackets��35
Headlights, parts.....32 - 33, 341 - 343
bracket................................................32
STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com
K
Knobs................................. 32, 42, 44 - 45
L
Lawn spinner..........................................59
Light bulbs - seal beam................... 343
Light switches, parts...........................32
knobs...................................................32
plate.....................................................32
resistor................................................32
M
Magnetos, parts....................................28
caps......................................................28
coil........................................................28
condensors........................................28
gaskets................................................28
manual................................................28
points..................................................28
rotors...................................................28
Manifolds, parts................................ 6 - 7
bracket.................................................. 6
elbows................................................... 7
gaskets..............................................6, 7
gasket material.................................. 7
Index continues on next page
3
Allis Chalmers: Alphabetical Index
M
Manifolds, parts cont...
nuts........................................................ 6
pipe....................................................6, 7
studs...................................................... 6
washer kit............................................. 6
Manuals........................................... 61 - 62
Mufflers........................................... 13 - 14
bracket................................................13
clamps.................................................13
N
Nameplates / emblems...............35, 46
clip........................................................35
rivet......................................................35
O
Oil / breather caps....................... 11 - 12
Oil filters...................................................12
gasket..................................................12
Oil pan drain plug................................12
gaskets................................................12
washer.................................................12
Oil pressure gauges, parts........ 21 - 22
copper line kit..................................22
fittings.................................................22
Oil pump repair kit...............................12
Outlet socket, parts.............................24
boot.....................................................24
connector plug................................24
P
Piston ring sets.................................. 7 - 8
Power steering parts.................. 47 - 48
belt.......................................................47
bolt.......................................................48
cap........................................................48
couplers..............................................48
port blocks.................................47, 48
priority flow control valve............48
pulleys.................................................47
pump...................................................47
torque generator.............................48
Pre-cleaner parts......................... 38 - 39
base......................................................39
bowls.......................................... 38 - 39
cap assemblies.................................38
clip & spring assy.............................39
covers..................................................38
pre-screener......................................39
screen..................................................39
PTO parts.................................................54
knob.....................................................54
over-running clutches...................54
shield...................................................54
seals.....................................................54
Pushrods.................................................... 9
R
Radiator, parts.............................. 18 - 19
caps......................................................19
4
R
Radiator, parts cont...
clamps.................................................19
drain plug..........................................18
gaskets................................................19
hoses...................................................19
mounting pad..................................18
pipes....................................................18
Raincaps...................................................14
Rear axle, parts............................. 53 - 54
bearing...............................................53
gaskets................................................54
seals.....................................................53
Rear main seal........................................11
Resistors............................................26, 32
Rims, front & rear......................... 54 - 58
bearing kits.......................................55
bolts................................54, 56, 57, 58
clamps.................................................57
inner tube valves.............................57
nuts........................................54, 56, 57
seals.....................................................55
stops....................................................58
tires......................................................56
tubes....................................................56
washer.................................................56
Rocker arm support stands................. 9
Rubber shift boots...............................45
S
Seat, parts...................................... 49 - 50
assemblies..................................49, 50
backs....................................................49
bolt.......................................................50
bumper...............................................49
bushings......................................49, 50
coil........................................................50
cushions......................................49, 50
hardware kit......................................49
pads.....................................................49
pan.......................................................49
pan repair kit....................................49
pivot support rod............................50
shock absorbers..............................50
support / spring...............................49
Sediment bowl assys, parts..... 40 - 41
bail assemblies..........................40, 41
bowls............................................40, 41
gaskets.........................................40, 41
screens.........................................40, 41
Serial numbers........................................ 5
Shroud assemblies...............................51
Side panels..............................................36
Sleeve sealing o-rings........................... 8
Snap coupler knobs......................44, 45
Snap coupler repair kit.......................59
Snap coupler spring............................59
Spark plugs.............................................27
Spark plug wiring sets............... 26 - 27
loom holder......................................27
S
Starters, parts................................ 28 - 30
band covers.......................................29
drives...................................................29
housings.............................................29
keys......................................................30
levers...................................................29
plate.....................................................30
repair studs.......................................28
rod........................................................28
spring..................................................29
starter solenoids..............................28
switches................................28, 29, 30
tags.......................................................29
Steering joint repair kits.....................47
Steering parts........................................47
brackets..............................................47
bushings.............................................47
shaft.....................................................47
shaft tubes.........................................47
Steering wheels, parts............... 45 - 46
bushing...............................................46
center caps / emblems..................46
nuts...............................................45, 46
spinner................................................46
Steering shaft cross & bearing.........47
Steering worm bearing......................46
Steps.........................................................54
Straight pipes.........................................14
T
Tachometers.................................. 22 - 23
cables...........................................22, 23
drive adaptor....................................23
gasket kit............................................23
nipple..................................................23
Tail light, parts..........33 - 34, 341 - 343
bulbs.................................34, 342, 343
gaskets.................... 33 - 34, 341, 343
knob.................................................. 341
lens.......................... 34, 341, 342, 343
reflector........................................... 341
rings.........................................341, 343
switches........................................... 341
terminal........................................... 341
Thermostats, parts...............................20
covers..................................................20
gasket..................................................20
Three point hitch, parts......................59
bushing...............................................59
drawbars............................................59
guide assy..........................................59
hanger.................................................59
lock.......................................................59
pins.......................................................59
snap coupler repair kit..................59
snap coupler spring.......................59
stabilizer bar.....................................59
Throttle parts.........................................42
bracket................................................42
bushing...............................................42
knob.....................................................42
levers...................................................42
lever slide / block............................42
quadrant............................................42
rod........................................................42
T
Throttle parts cont...
springs................................................42
Tie rod, parts................................. 48 - 49
tie rod ends.......................................48
tie rod boots............................ 48 - 49
Tires, tubes..................................... 56 - 57
nut........................................................57
valves...................................................57
Toolboxes................................................51
Top-links, parts............................. 58 - 59
bushing...............................................58
pins.......................................................58
Traction booster gauge......................23
Trans., clutch parts...................... 42 - 43
alignment tool.................................43
bushings.............................................43
dipstick...............................................43
disc.......................................................42
flywheel cover..................................43
fork.......................................................43
inspection cover plates..........42, 43
kits........................................................42
main shaft drive gear.....................43
pressure plate...................................42
return springs............................42, 43
throw out bearings..................42, 43
seal.......................................................43
shaft.....................................................43
pinion shaft gears...........................43
3rd / 4th shift fork...........................43
U
Umbrellas................................................59
V
Valve cover gaskets................................ 9
Valve grind gasket sets......................... 9
Valve train kits.......................................10
Videos.......................................................62
Voltage regulators................................31
conversion kit...................................31
W
Warning lights, parts...........................34
bulbs....................................................34
lens.......................................................34
Water pipes.............................................18
Water pumps..........................................20
Water temperature gauges...............22
Weight, front..........................................58
anchors...............................................58
bracket set.........................................58
rods......................................................58
Weights, wheel......................................57
j-hook..................................................57
Wheels, front & rear.................... 54 - 58
bearing kits.......................................55
bolts................................54, 56, 57, 58
clamps.................................................57
inner tube valves.............................57
nuts........................................54, 56, 57
seals.....................................................55
stops....................................................58
tires......................................................56
tubes....................................................56
washer.................................................56
Wiring harness kits...............................25
STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm
B, C, CA, G
serial number
location
Allis Chalmers: Beginning serial numbers
WD & WD45 serial
number location
D10, D12, D14, D15, D17, D19, D21,
170, 175, 180, 190, 200, 210 & 220
Serial number location
170, 175, 180, 185,
190, 190XT, 210 &
220 serial no. located
at front of torque
housing flange.
Model 170
1968..................... 2721
1969..................... 5374
1970..................... 6369
1971..................... 6988
1972..................... 7797
1973..................... 8821
Model 175
1970..................... 1001
1971..................... 1477
1972..................... 1624
1973..................... 1740
1974..................... 2153
1975..................... 3255
Model 180
1968..................... 2682
1969..................... 6094
1970..................... 9235
1971................... 10561
1972................... 11729
1973................... 12447
Model 185
1970..................... 1001
1971..................... 1952
1972..................... 2935
1973..................... 3763
1974..................... 4961
1975..................... 6542
Model 190 & 190XT
1964..................... 1001
1965..................... 2485
1966..................... 8219
1967................... 13273
1968................... 19262
1969................... 23234
1970................... 25901
1971................... 29136
1972................... 31057
1973................... 31118
Model 200
1972..................... 1001
1973..................... 3344
1974..................... 6294
1975..................... 9250
Model 210
1970..................... 1001
1971..................... 1107
1972..................... 2082
1973..................... 2469
Model 220
1970..................... 1938
1971..................... 2451
1972..................... 2626
1973..................... 2860
7000 serial no.
located on RH side of
differential
housing.
Model 7000
1975..................... 1001
7030, 7040, 7050, 7060
& 7080 serial no.
located above PTO
guard.
Model 7030
1973..................... 1001
1974..................... 2595
Model 7040
1975..................... 1303
Model 7050
1973..................... 1001
1974..................... 1688
Model 7060
1975..................... 1299
Model 7080
1975..................... 1007
B, C, CA, G, U
serial no. located on
top of transmission
case, to the rear of
shift lever.
Model B
1937........................... 1
1938......................... 97
1939................... 11800
1940................... 33502
1941................... 49721
1942................... 56872
1943................... 64501
1944................... 65502
1945................... 70210
1946................... 72265
1947................... 73370
1948................... 80056
1949................... 92295
1950................. 102393
1951................. 114527
1952................. 118674
1953................. 122310
1954................. 124201
1955................. 124711
1956................. 126497
1957................. 127186
Model G
1948........................... 6
1949................... 10961
1950................... 23180
1951................... 24006
1952................... 25269
1953................... 26497
1954................... 28036
1955................... 29036
Model IB
1946..................... 1001
1947..................... 1003
1948..................... 1010
1949..................... 1282
1950..................... 1556
1951..................... 1879
1952..................... 2219
1953............2570-2847
1954..................... 3068
WC serial no. located
on rear of differential
housing just above
operator platform.
Model C
1940........................... 1
1941....................... 112
1942................... 12389
1943................... 18782
1944................... 23908
1945................... 30695
1946................... 36378
1947................... 39168
1948................... 51515
1949................... 68281
Model CA
1950......................... 14
1951....................... 322
1952................... 10539
1953................... 22181
1954................... 31424
1955................... 32907
1956................... 37203
1957................... 38618
1958................... 38977
Model RC
1939........................... 4
1940..................... 4392
1941..................... 5417
Model WC
1933........................... 1
1934......................... 29
1935..................... 3127
1936................... 13870
1937................... 31784
1938................... 60790
1939................... 75216
1940................... 91534
1941................. 103517
1942................. 114534
1943................. 123171
1944................. 127642
1945................. 134624
1946................. 148091
1947................. 152845
1948................. 170174
WD, WD45 serial no.
is located on top of
left differential brake
housing.
Model WD
1948........................... 7
1949..................... 9250
1950................... 35445
1951................... 72328
1952................. 105182
1953................. 131243
Model WD45
1953................. 146607
1954................. 160386
1955................. 190993
1956................. 217992
1957................. 230295
WF serial no. located
on rear of differential
housing above op.
platform.
Model WF
1937........................... 4
1938....................... 389
1939..................... 1336
1940..................... 1892
1941..................... 2300
1942..................... 2704
1944..................... 3004
1945..................... 3195
1946..................... 3510
1947..................... 3748
1948..................... 4111
1949..................... 5500
1950..................... 7318
1951..................... 8316
D-10, D-12, D-14,
D-15, D-17, D-19,
D-21 serial no. located
at front of torque
housing on left side.
Model D-10
1959..................... 1001
1960..................... 1950
1961..................... 2801
1962..................... 4522
1963..................... 6801
1964..................... 7675
1965..................... 9204
1966..................... 9486
1967..................... 9795
1968..................... 9979
Model D-12
1959..................... 1001
1960..................... 1950
1961..................... 2801
1962..................... 3638
1963..................... 5501
1964..................... 6012
1965..................... 9192
1966..................... 9508
1967..................... 9830
1968..................... 9979
Model D-14
1957..................... 1001
1958..................... 9400
1959................... 14900
1960................... 21800
Model D-15
1960..................... 1001
1961..................... 1900
1962..................... 6470
1963................... 13001
1964................... 16928
1965................... 19681
1966................... 21375
1967................... 23734
1968................... 25127
Model D-17
1957..................... 1001
1958..................... 4300
1959................... 16500
1960................... 28200
1961................... 33100
1962................... 38070
1963................... 65001
1964................... 70611
1965................... 77090
1966................... 80533
1967................... 86061
D-19 serial no. located
on rear end housing
behind seat.
Model D-19
1961..................... 1001
1962..................... 7331
1963................... 12001
1964................... 16266
Model D-21
1963..................... 1001
1964..................... 1417
1965..................... 2079
1966..................... 2408
1967..................... 2863
1968..................... 3777
1969..................... 4498
5
Allis Chalmers: Engine parts
Order #
ACS156
Price
$269.95
Manifolds, parts
Order #
ACS001
ACS001GK
ACS002B
ACS002GK
ACS085
ABC2290
ACS004
ACS004GK
ACS217
ACS1762
Price
$93.50
$7.95
$99.00
$9.25
$224.50
$0.95
$157.90
$16.30
$4.95
Description / Application
Manifold
Fits: G
Replaces: 70800333
NOTE: Intake & exhaust ports are in
perfect alignment! Made from ductile
iron.
Gasket Set (For ACS001)
Replaces: 70800299 (manifold), 70800304
(carburetor)
Manifold
Fits: B, IB, C, CA, RC
Replaces: AM2919, 70225323
Gasket Set (For ACS002B)
Replaces: 70226096
Manifold & Exhaust Elbow
Fits: WC, WF up to engine SN: 106509
w/ 45º side exhaust out of left side of
hood, Replaces: 70203178, 70229940
Brass Manifold Nut
Fits: B, C, CA, D10 thru D15, RC, WC,
WD, WD45, WF gas, LP
Replaces: 70239400
(3/8" - 16" NC.)
NOTE: Sold individually.
Manifold & Bracket
Fits: WC, WD, WD45
Replaces: 70224782, 70229416
Gasket Set
(For ACS085, ACS004)
Replaces: 70299958
NOTE: Elbow gaskets were never used.
$169.95
ACS003GK
$9.75
ACS004
$157.90
ACS081
ACS1875
ACS004GK
$189.60
$9.95
$4.95
Manifold
Fits: D10, D12, I40, I400
Replaces: 70233235
(17-3/8" c.c. outer stud holes, 2-1/4" c.c.
carb mount,1.000" dia. center venturi
hole)
Manifold
Fits: D14, (D15 up to SN: 9001 gas); Will
fit D15 gas SN: 9001 & up, but customer
must make an adaptor for muffler; I-60,
I-600, Replaces: 70234143
ABC1878
ACS1872
ACS005
Price
$257.25
COS010GK
$19.95
ACS005GK
$17.80
Gasket (For ACS156, ACS003)
Replaces: 70234140 USA made
Manifold w/out Threaded Exhaust
& Bracket
Fits: D17 up to SN: 32000 gas
w/out threaded exhaust
Replaces: 70224782, 70229416
Manifold w/ Threaded Exhaust
Fits: D17 series III, IV SN: 32001 & up;
170, 175 gas (All w/ threaded exhaust)
Replaces: 70257485
NOTE: Will fit Early D17 when threaded
pipe desired.
Exhaust Pipe
Fits: D17 SN: 32001 & up gas, LP, 170 gas,
175 gas, Replaces: 70234541
(1-1/2" pipe thread x 4" length)
USA made
IHS003EXP
ACS307
$7.95
$1.75
$5.95
Manifold
Fits: D19 gas, Combines: A, C, F
w/ 6-cyl. 230, 262 CI. Allis Chalmers
engine, Replaces: 74513468, 74516769
Gasket materials cont...
Order #
Price
Manifold Gasket (For ACS005)
Fits: D19 gas USA made
NOTE: When customer wants a 1-piece
gasket instead of individual gaskets.
ABC1835
$10.95
Gasket (For ACS005)
Replaces: 74512715
ABC1844
$15.95
Gasket Paper
For making general purpose gaskets
(0.0160" thick x 18" wide x 98" long)
NOTE: Do not use for high temperature
applications.
Exhaust Pipe (For ACS005)
Replaces: 74513471
(2" pipe threads, 2-1/4" OD,
10-3/8" or longer)
ABC1846
$22.95
Gasket Paper
(0.0275" thick x 20" wide x 108" long)
USA made NOTE: Do not use for high
temperature applications.
Manifold Stud fits the following gas,
LP: D17, 170, 175, Combines w/ 226 gas
engine: E, E3, K; Industrials gas, LP: 616,
622, 801, 802, Replaces: 70229339
(7/16"-14 NC x 7/16"-20 NF x 4-3/4"
length) NOTE: 6 used per engine;
Sold individually.
Cork / Rubber Rollpack Gasket Material
(3/32" thick x 12" wide x 24" long)
USA made NOTE: Do not use for high
temperature applications.
$99.95
Exhaust Turbo Elbow
Fits: D19, D21, 210, 220, 7000, 7010, 7020
Replaces: 70253661
Piston ring sets - USA made
Do not order by tractor model only. To ensure you order the
correct rings, you will need the following information:
ACS088
$79.95
1
Turbo Elbow
Fits: 190, 200, Combines: GL, L, L2, M,
M2, Replaces: 70244418
ABC2511
$3.95
Manifold Nut & Washer Kit
Fits: D17 gas, LP, (170, 175 gas)
Replaces: 70237091
(7/16"-20 NF)
Manifold Nut & Lockwasher
Fits: D15 diesel, D17, D19 gas, diesel, 170,
175 gas, Replaces: 70237091
(7/16" - 20 NF)
NOTE: Brass nut, yellow zinc
lockwasher. 6 or more used per tractor,
Sold individually.
$12.50
Bore size
NEW! Turbocharger to Exhaust Manifold
Mounting Gasket
Fits: D19 thru 8550
NOTE: See website for full applications.
2
Thickness of
each ring
ABC448
ABC1830
Price
$17.90
$13.95
Quantity of each ring thickness per
piston.
and availability of other sizes. USA made (unless noted).
Price
Application
Fits: Some early B (w/ Waukesha
Flathead engine) (If 3 ring piston, discard
1 compression ring) & early B (w/ AC
engine) 4-cyl.
ABC2166
$69.95
Gasket materials
Order #
3
Piston rings can not be returned if opened. Call or email for price
Order #
Gasket Set (For ACS081)
FDS1721
Order #
$16.30
Manifold Stud (For ACS085, ACS004)
Replaces: 70203072
(4-1/2" coarse both ends, 3/8" dia.)
USA made NOTE: 6 studs used per
engine; Sold individually.
Bracket (For Muffler)
Fits: Early D17 gas, Styled WC, WD,
WD45; Will also fit the B, C, CA, RC if
customer trims approximately 1" off the
length & redrill one hole if needed
6
ACS003
ABC2166: 3-1/4" standard bore, (3) 0.125"
compression rings, (1) 0.187" oil ring
Fits: Some B, C, CA, IB, RC, (D10, D12 up
to SN: 3500)
ABC2070 Replaces: 70230093, 79017908
Exhaust Manifold Gasket Material
Fits: Allis Chalmers models
(1/16" thick x 12" wide x 28-1/2" long)
USA made
NOTE: Perforated steel core.
ABC2070
$74.95
ABC2070: 3-3/8" overbore, (3) 0.125"
ABC2072
$118.50
Cork / Rubber Rollpack Gasket Material
(1/16" thick x 12" wide x 24" long)
USA made
NOTE: Do not use for high temperature
applications.
ABC2072: 3.4375" overbore, (3) 0.093"
compression rings, (2) 0.187" oil rings
NOTE: On engines w/ 4 piston rings, discard
1 oil ring per cylinder.
ABC2086
$98.50
ABC2086: 3.4375" overbore, (3) 0.125"
Piston ring sets continue on next page
7
Sleeve sealing o-rings - USA made
Valve grind gasket sets
NOTE: Sold as one pair for one cylinder.
NOTE: Includes all gaskets required when replacing the cylinder
Order #
Piston ring sets - USA made cont...
ACS2111
Price
$4.95
Do not order by tractor model only. To ensure you order the
correct rings, you will need the following information:
1
Bore size
2
Thickness of
each ring
3
Quantity of each ring thickness per
piston.
ACS2109
$4.95
Piston rings can not be returned if opened. Call or email for price
and availability of other sizes. USA made (unless noted).
Order #
Price
Application
Fits: 'Some' D15 SN: 9001 & up, H3 SN:
6960 & up, I60, I600 4-cyl. gas, LP w/
G160 engine, Replaces: 70248293
ABC2084
$94.50
ACS2113
$6.95
ABC2084: 3-5/8" overbore, (3) 0.093"
Application
Fits: B, C, CA, IB, RC
(All w/ 116 & 125" engines)
Replaces: 70206666, 70227501
(0.125" thick)
Fits: D10, D12, D14, (D15 up to SN: 9000),
I40, (H3 up to SN: 6959) gas, LP
(All w/ G138 & G149 engines)
Replaces: 70227563
(0.135" thick)
Fits: WC SN: 65528 and up, WD, WD45,
WF, D17, 170, 175 gas, LP
Replaces: 70207436, 70227500
(0.125" thick)
Engine overhaul kits
Fits: Some D17, WC, WD, WD45, 170, 175
gas, LP
ABC2076 Replaces: 70230091
head.
Order #
Price
ACS025VGK
$49.95
ACS297
Fits: B, IB, C, CA, RC (All w/ 125" gas
engines up to 3.625" bore)
Replaces: 70224768
ACS291
ACS1658
$65.95
$124.95
ABC2078: 4-1/8" overbore, (2) 0.093" & (1)
0.125" compression rings, (1) 0.250" oil ring
Engine gasket sets
$114.20
ABC2190: 4" standard bore, (3) 0.125"
overhaul.
Order #
Price
ABC2082
$79.50
ABC2082: 4" overbore, (3) 0.093" compression
rings, (1) 0.250" oil ring
NOTE: Not USA made
ABC1319
$82.90
ACS2065
ACS2063
$82.50
$82.50
ACS2065: 2.375" standard bore, (2) 0.093"
ABC2178
8
$179.80
ACS1322
$69.00
ABC2178: 3-1/2" bore, (3) 0.125" compression
Valve cover gaskets
Order #
ACS313
Price
$14.95
ACS1949
$103.50
ACS1320
$22.50
ACS2410
$22.50
ACS2415
$22.50
Fits: D10, D12, D14, (D15 up to SN: 9000),
I40, I400, (H3 up to SN: 6959), RT40 all w/
gas, LP w/ 138, 149" engines
Replaces: 70255326
Fits: WC & WF both w/ engine SN: 72459
& up (15 stud head); WD, WD45, D17,
170, 175 gas, LP, Replaces: 70277290
Valve Cover Gasket
Replaces: 70206892
$15.95
Valve Cover Gasket
Fits: D10, D12, D14, D15, I-40, I-60, I-400,
I-600 gas, LP, Replaces: 70255296
USA made
ABC1661
$13.95
Valve Cover Gasket
Fits: D15, HD3 diesel
Replaces: 4513480, 74501034
USA made
ACS315
$14.95
Valve Cover Gasket
Fits: WC, WD, WD45, WF, D17, 170, 175
gas, LP (All w/ 201, 226" engines)
Replaces: 70255297
ABC2589
$27.50
NEW! Valve Cover Gasket
Fits: D17 diesel, D19 gas, diesel, WD45
diesel, Replaces: 74513482, 74516343
USA made
ACS2055
$6.50
$111.45
Order #
Price
ACS1196
$28.50
ACS1161
$28.50
ACS1187
Replaces: 70277278
ACS2063: 0.020" overbore, 2.395" bore, (2)
0.093" compression rings, (1) 0.187" oil ring
Fits: WD45 diesel 6-cyl.
Application
Fits: G w/ N-62 Continental engine
Replaces: 70800336
ABC2090: 4-1/8" overbore, (3) 0.093"
ACS2405
Application
Fits: B, C, CA, IB, RC; Power Units: B125,
60H; Loader: TL6; Combines: 60, 66
Replaces: 70207426
(9.828" length, 0.280" dia.)
Fits: D10, D12, D14, D15, H3, I40, I60, I400,
I600 (All w/ 138 CI, 149 CI, 160 CI gas, LP)
Replaces: 70227633
(9.233" o/a length, 0.270" O.D.)
Fits: D17, WC, WD, WD45, WF, 170, 175 gas,
LP (All w/ 201, 226 C.I. engines)
Replaces: 70203018
(11.017" o/a length, 0.314" O.D.)
Cast rocker arm support stands
NOTE: Includes all gaskets & crankshaft seals for major engine
ABC2190
Fits: G 4-cyl.
ACS065 Replaces: 70800325
Fits: WC, WF w/ engine SN: 72459 & up
w/ 15 stud head, WD, WD45, D17, 170,
175 gas, LP (All w/ 201, 226" gas engines)
Replaces: 7027728
our website.
ABC2078
Price
Fits: D10, D12, D14 (D15 up to SN: 9000),
I40, I400, (H3 up to SN: 6959) RT40 gas,
LP (All w/138, 149" engine)
D10 thru 8070. For price and availability call, or
ABC2076: 4" overbore, (3) 0.125" compression
Order #
$42.75
special order for G, B, C, CA, RC, WC, WD, WD45,
$88.50
$54.95
Inframe or out of frame kits are available by
ABC2076
$78.50
Pushrods - USA made
Replaces: 70800258, 70800295, 70800297,
70800299
visit Special Order Parts under Shop Online on
ABC2090
Application
Pushrod Side Cover Gasket
Fits: WC, WD, WF, W Speed Patrol,
201" Power Units, Replaces: 70218604
Application
Fits: D10, D12, D14, D15, H3, I40, I60, I400,
I600 gas, LP (All w/ G138, G149, G160"
engines), Replaces: 70227627, 70239791
NOTE: 4 used per tractor;
Sold individually.
Fits: (WD, WF w/ engine SN: 253200 253489), WD45, D17, 170, 175 gas, LP
(All w/ 201, 226" engines)
Replaces: 70224727, 70225019
(1.945" tall, 0.865" hole dia.)
NOTE: Measure prior to ordering.
4 used per tractor; Sold individually.
FROM OUR CUSTOMERS!
Just wanted to let you know how impressed
I was with the quality of the packaging on my recent
order. I order a lot of things online and don't think I
have ever gotten a package so nice! I have ordered
tractor parts from other suppliers and they were just
thrown into the box with an invoice and maybe a few
pieces of crumpled up newspaper. Keep up the good
work. -Tom R.
9
Crankshafts, parts
Crankshafts, parts cont...
NOTE: Bearings not included. Measure bearings before ordering,
NOTE: Bearings not included. Measure bearings before ordering,
no returns if package has been opened.
no returns if package has been opened.
Order #
Valve train kits
ACS250
Order #
Price
Application
ACS2129
$115.00
Fits: B, IB, C, CA, D10, D12, D14, D15 (up to
SN: 9000), H3, I40, I400, RC gas, LP
Replaces: (4) 70234829 intake valves, (8)
70206879 valve springs, (4) 70228589 exhaust
valves, (8) 70234824 valve guide, (16)
70206880 valve keepers
NOTE: Does not include retainers. Fits
engine SN: CE161057 & up, to use on
earlier engines customer must use exhaust
valve roto caps #70224926 (not supplied
from STP, Inc.).
ACS323
ACS073
Price
$150.00
Fits: D10, D12, D14, D15 gas, H3, I-40, I-60,
I-400, I-600, Replaces: Casting #227550
NOTE: For bearings see ACS1954, ACS1952.
ACS2481
ACS2483
NOTE: Includes NEW valves, guides,
springs, locks & retainers.
$17.75
$17.75
ACS2524
$17.75
ACS1952
$64.95
Crankshaft pulleys
Price
ACS349
$74.95
Application
Crankshaft Pulley
Fits: G
Replaces: 70800220
(5-3/16" O.D.)
ACS089
ACS069
ACS154
10
$36.30
$185.50
$78.95
ACS2485
Crankshaft Pulley
Fits: CA, (Early D10 up to SN: 3500), D12
up to SN: 3000, D14; Serviceable for B, C, IB
but does not have provision for hand crank,
Replaces: 70236741, AM4529
(5" pulley dia., 5/8" belt width)
NOTE: Set screw NOT included.
ACS2488
Crankshaft Pulley Double groove power
steering w/ cone-shaped allen screw
Fits: WD, WD45 w/ & w/out power steering,
Replaces: 70227395
NOTE: Includes set screw.
Crankshaft Pulley
Fits: Late D10 SN: 3501 & up,
D12 SN: 3001 & up, D15, I60, I500, I600
Replaces: 70235043, AM4761
(5-1/16" pulley dia., 3/8" belt width)
NOTE: Includes set screw.
Crankshaft Main Bearings (2.000" standard
size) 4-piece set - 2 bearings)
Fits: G, N-62 Continental engine
ACS1954
ABC2495
Order #
Price
ABC2498
$14.95
$399.00 Crankshaft
$156.65
Order #
$16.25
$16.25
NEW! Standard Connecting Rod Bearing
(For 1.937" standard rod journal)
Fits: B SN: 101 & up, C, CA, IB, RC
NOTE: 4 used per engine; Priced & sold per
journal.
NEW! Connecting Rod Bearing
(For 0.010" (1.927") undersize rod journal)
NOTE: Priced & sold per journal.
(For 0.020" (1.917") under size rod journal)
USA made NOTE: Priced & sold per
journal.
ACS2490
ACS2493
$12.25
$12.25
Fits: Same as ACS1952 EXCEPT 0.020"
undersize USA made
Fits: D17, (WC engine SN: 13665 & up), WD,
WD45, 170, 175 (All gas, LP)
ABC1996
$9.95
Front Crankshaft Oil Seal
Fits: D10, D12, D14, D15, H3, WC, WD,
WD45, WF, I40, I60, I400, I600 gas, LP
Replaces: 70226620, 70275814
(2.000" O.D., 1.500" I.D., 0.250" wide)
NOTE: WC, WD, WD45, WF w/ engines up
to SN: 269166 can not reuse seal retainer
224929 as this seal is wider.
ABC2263
IHS1307
$17.95
$7.95
standard main journal)Fits: D10, D12, D14,
D15, H3, I40, I60, I400, I600 (All 4-cyl. 138,
149, 160 C.I. gas, LP), Replaces: 70237651,
70237652, 70237830, 70237831 USA made
(For Standard 1.998" rod journal)
Fits: D15 diesel, D17 diesel, D19 gas, diesel,
WD45 diesel (All w/ standard 1.998" rod
journal), Replaces: 74517331 USA made
NOTE: Priced & sold per journal. See
website for full applications.
(For 0.010" (2.365" undersize rod journal)
Fits: D17, (WC above engine SN: 13655), WD,
WD45, 170, 175 (All gas, LP) USA made
$12.25
$179.50 Main Bearing Set (Set of 3) (For 2.749"
$14.95
Fits: D17, (WC above engine SN: 13655), WD,
WD45, 170, 175 (All gas, LP)
ACS2562
Standard Connecting Rod Bearing Set
Fits: D10, D12, D14, D15, H3, I40, I60, I400,
I600 (All w/ 4-cyl 138, 149, 160 C.I. gas, LP)
Replaces: 70228486, 70237802 USA made
Fits: Same as ACS1952 EXCEPT 0.010"
undersize USA made
Fits: D15 diesel, D17 diesel , D19 gas, diesel,
WD45 diesel (All w/ 0.010" undersized rod
journal), Replaces: 74514864 USA made
See website for full applications.
ABC2000
$19.95
Front Crankshaft Seal
Fits: G
Replaces: 70800223, 70272367
(0.465" wide, 2.722" O.D.)
USA made
Front Crankshaft Seal
Fits the following diesels: WD45, D15, D17,
D19; Also fits D19 gas
Replaces: 74513621
(1.875" I.D., 2.627" O.D., .312" width)
Crankshafts, parts cont...
Order #
ABC2056
Price
$9.95
Rear Crankshaft Seal
Fits: G w/ N62 Continental engine
Replaces: 70800225
(3.375" I.D., 4.381" O.D., .500" width)
ACS2037
$8.95
2-Piece Rear Crankshaft Main Seal
Fits: W, WC, WD, WF, WD45 gas, LP
ACS2388
$9.95
NEW! 2-Piece Rear Crankshaft Main Seal
Fits: D17, 170, 175 gas, LP
Replaces: 70229180, 70241294
USA made
Oil caps
Order #
IHS338
Price
$8.95
Underside view
ACS178
(Without
Clip)
IHS406
(With Clip)
Rear Crankshaft Seal
Fits: D10, D12, D14, D15, H3, I40, I400, I60
I600 gas, LP
Replaces: 70227572
(3.375" I.D., 3.955" O.D., .375" width)
Engine Oil Fill Cap w/ Gasket
Fits: G, Replaces: 70800287
(1-3/4" I.D. tang to tang 1-3/8)
USA made
$38.50
$38.50
Oil Fill / Breather Cap & Copper Filter
Element fits: B, IB, C, CA, RC, WC (On
rocker arm cover); Late WD, WD45, WF,
D10, D12, D14, D15, D17, 170, 175, 190XT,
I-40, I-400, I-60, I-600, Replaces: 70205298
(3-1/4" tall) USA made
NOTE: Exact of original. E-coated black.
"Oil" stamped into top.
Oil caps continue on next page
11
Oil filter base gasket
Fits: B, C, CA, D10, D12, D14, (D17 up to SN:
24001), IB, RC, WC, WD, WD45, WF (All gas,
LP), Replaces: 70233228
(4-13/16" length, 1-1/2" tall, 3-1/2" c.c.
mounting holes)
Oil caps cont...
Order #
ACS286
JDS500
ABC042
Price
$14.95
$32.50
$12.95
Oil Fill Cap w/ Gasket
Fits: WD45, 170, 175 gas
Replaces: 70226376
(2-3/16" I.D.)
Oil Fill / Breather Cap w/ Clip
& Copper Filter Element
Fits: WC, Early WD, WF, (On governor
housing) D19 diesel up to engine
SN: D-03046 & D15 diesel up to engine
SN: D-03046, Replaces: 70207552
(1-1/2" tall) USA made NOTE: Exact of
original. E-coated black. "Oil" stamped
into top. Fits over 1-1/2" pipe.
Oil Fill / Breather Cap w/ Clip
& Filter Element
Fits: Same as JDS500, Replaces: 70207552
(1-1/2" tall)
NOTE: Economy style.
Description
Order # Order #
Price
ABC006
$19.95
ABC007
$9.85
$6.95
Oil pan drain plug, gaskets
ABC539
ABC540
ACS357
ACS293
ACS295
12
Price
$7.95
$2.95
$10.75
$13.95
$16.90
Oil Pan Drain Plug
Fits: (B SN: 64501 & up), IB, C, CA, WC,
WD, WD45, D10 thru D21, (170 gas only),
(175 gas only), 180 thru 220, 6060, 6070,
6080, 7000, 7010, 7020, 8010 gas, diesel, LP
Replaces: 74026437
(7/8" x 18 NF) USA made
Washer / Gasket (For ABC539)
Replaces: 70226012
USA made
NOTE: Copper.
Oil Pan Gasket
Fits: G & others w/ N-62 Continental
engine, Replaces: 70800286
USA made
Oil Pan Gasket
Fits: B, IB, C, CA, D10, D12, D14, D15 gas,
RC, I-40, I-400, I-60, I-600
Oil Pan Gasket
Fits: WC, WD, WD45, WF, D17, 170, 175
gas, Replaces: 70233602 (side gasket);
70236660 (WD, WD45 end gasket; D17,
170, 175 end gasket); 70229178 (main
bearing cap gasket)
Price
ABC014
$55.30
ACS206
$59.95
Application
Fits: B, IB, C, CA, G, RC, WC, WD, WF,
WD45 & WD45 diesel; D10, D12, D14, (D17
gas, LP up to SN: 24001) w/ spin on-style
filter, Replaces: 70240912
(4-5/8" tall) USA made
NOTE: Threaded neck type
Fits: D15, (D17 SN: 24001 & up) All gas, LP;
170, 175 gas, diesel (All w/ spin on-style)
Replaces: 70251381
(5-1/4" tall, 3.675" O.D.)
USA made
Fits: 160, 6040 (All diesels)
w/ cartridge-style filter
Replaces: 2080205
(4-1/2" tall, 2-3/4" W)
Oil pump kit
Replaces: 70800264, 70800266, 70800267,
70800271, 70800273, 70800658
USA made
Description
Order # Fits: D10 SN: 3501 & up, D12 SN: 3001 & up,
D14 SN: 19001 & up & engine SN: 19070 &
up, D15 gas, I60, I500, I600
Replaces: 70233196
NOTE: Has 116 teeth.
Order #
Price
$2.95
(1-1/2" clamp)
ABC570
$2.95
(1-5/8" clamp)
ABC572
$2.95
(1-3/4" clamp)
ABC574
$3.25
(1-7/8" clamp)
ABC576
$3.25
(2" clamp)
ABC578
$3.25
(2-1/4" clamp)
ABC580
$3.25
(2-1/2" clamp)
ABC583
$4.95
(2-3/4" clamp)
ABC585
$4.95
(3" clamp)
ABC2234
$4.95
(3-1/2" clamp)
ABC1771
$7.95
(4" clamp)
$64.95
ABC013
$49.35
Price
ACS067
$44.95
ACS082
$51.60
$25.70
ACS103
$37.85
Fits: B, IB, C, CA, RC (1938-57) above hood
except low octane engine
Fits: B, IB, C, CA (1938-57) thru hood, D10,
D12, D14, D15 gas up to SN: 9001
NOTE: Includes bracket.
ACS103 (Vertical round body) Dimensions:
Inlet length: 2-1/2", Inlet O.D.: 1-1/2", Shell
length: 16-1/2", Shell diameter: 3-1/4", Outlet
length: 10", Outlet O.D.: 1-1/2", Overall length:
29", If raincap is needed - order RCS003
Fits: Early D17 gas, Styled WC, WD, WD45;
Will also fit the B, C, CA, RC if customer
trims approximately 1" off the length &
redrill one hole if needed
Order # ACS105
$30.25
Fits: WC SN: 106509 & up, WD gas (1948-53),
WD45D thru hood
Inlet length: 2-1/2", Inlet O.D.: 1-5/8", Shell
length: 16-1/2", Shell diameter: 3-1/4", Outlet
length: 10", Outlet O.D.: 1-3/4", Overall length:
29", If raincap is needed - order RCS004
Price
Application
Fits: B, IB, C, CA
Replaces: 70209292
NOTE: Has 90 teeth.
Fits: B, IB, C, CA (1938-57) under hood
Replaces: 70210081
USA made
Inlet length: 7", Inlet O.D.: 1-1/2", Shell length:
12-3/4", Shell diameter: 3-1/4", Outlet length:
9-1/4", Outlet O.D.: 1-1/2", Overall length: 29",
If raincap is needed - order RCS003
Muffler Bracket......................................................... ACS1762............. $4.95
Replaces: 70800311
(9.199" I.D., 10.950" O.D.)
NOTE: Has 86 teeth.
Application
Fits: G
Replaces: 70800458
NOTE: Exact of original
ACS101
Muffler bracket
Price
Flywheel ring gears
ACS032
Order #
Inlet length: 1", Inlet O.D.: 1-1/2", Shell length:
4-1/4", Shell diameter: 4-1/2" x 9", Outlet length:
3-3/4", Outlet O.D.: Bent pipe, Overall length: 9"
Dimensions
ABC568
Description
Price
Mufflers
Economy muffler clamps
USA made
Oil Pump Kit............................................................. ACS322............... $176.70
NOTE: Must size bushing to fit.
Order #
Application
Fits: RC, WC, WD, WD45 gas, WF
Replaces: 70208132
NOTE: Has 100 teeth.
Oil filters
ABC149
Order #
Order #
Price
NEW! Oil Filter Base to Block Gasket.................. ACS2397............. $3.65
NOTE: Cork.
Flywheel ring gears cont...
ACS107
FROM OUR CUSTOMERS!
Thank you for your fast service
My order was delivered at 10 am today! - Ken B.
$34.95
Fits: (D17 up to SN: 32000 gas, LP), G226,
W226, Late WC, WD, WD45 gas (1953-57)
Replaces: 70229531
USA made
ACS107 (Vertical round body) Dimensions: Inlet
length: 2-1/2", Inlet O.D.: 1-5/8", Shell length:
16-1/2", Shell diameter: 3-1/4", Outlet length: 10",
Outlet O.D.: 1-3/4", Overall length: 29", If raincap
is needed - order RCS004
Mufflers continue on next page
13
Exhaust pipe
Fits: 190 gas, diesel (use w/ ACS2231
muffler), 190XT; Serviceable for D21
Replaces: 70244555, 70243284
(Inlet and outlet I.D.: 3", o/a length: 40")
USA made
Mufflers cont...
Order #
Price
ACS327
$52.40
Application
Fits: D15 gas SN: 9001 & up, I60, I600
Replaces: 70237811
USA made
Description
Order # ACS330
$57.50
ACS2235
$59.95
Fits: 180, 185 gas, diesel
Replaces: 70248883
USA made
NOTE: Black finish.
$79.95
Fits: 190 up to SN: 19000 (Non turbo) under
hood gas, diesel, Replaces: 70243283
USA made NOTE: Silver finish. Use w/
ACS2233 straight pipe.
ACS2231 (Horizontal round body) Dimensions:
Inlet length: 2", Inlet I.D.: 2-3/8", Shell length:
18", Outlet length: 2-3/4", Outlet O.D.: 2-3/4",
Overall length: 18"
Raincaps
Order #
Price
Dimensions
RCS002
$9.65
(1-1/4" - 1-7/16" I.D.)
RCS003
$9.80
(1-1/2" - 1-11/16" I.D.)
RCS004
$9.95
(1-3/4" - 1-15/16" I.D.)
RCS005
$10.35
(2" - 2-3/16" I.D.)
RCS006
$10.75
(2-1/4" - 2-7/16" I.D.)
RCS007
$10.95
(2-1/2" - 2-11/16" I.D.)
RCS009
$13.35
(3" - 3-3/16" I.D.)
RCS015
$41.95
(3" I.D.) NOTE: Chrome plated. USA made
RCS016
$45.95
(3-1/2" I.D.) NOTE: Chrome plated. USA made
14
$7.50
Price
NEW! Choke or Fuel Shut Off Cable Clip
(For Marvel Schebler choke cable bracket)
Fits: D15 SN: 9001 & up, D17 SN: 42001 &
up, D19, 170, 175, H3, I500, I600; Also works
for diesel fuel cable shut off for 7000 thru
7580, Replaces: 74047137 USA made
NOTE: See website for a complete listing
of applications & carburetor numbers.
Description
ABC1156
$23.95
ABC133
$6.15
VITON Needle Float Valve
(For Marvel Schebler carburetors)
Fits: D15 SN: 9001 & up, D17, D19, WD45,
170, 175 (All w/ TSX 464, 561, 591, 773, 783,
821, 848, 853), Replaces: 70226458, 133-543
(.080 orifice) USA made NOTE: VITON
needle & seat helps stop carburetor
flooding.
ABC230
$6.45
VITON Needle Float Valve
Fits: B, C, CA, D14, D15, G, IB, RC, WC, WD,
WF All w/ TSX 154, 159, 305, 422, 470, 486,
670, 701, 815, 844, 879, 912, 931, 986, 990 (All
TSV series), Replaces: 70244912
(.070 orifice) USA made
NOTE: Viton needle & seat helps stop carb
flooding.
ABC513
$2.50
ABC1159
$5.00
Carburetor Fuel Inlet Elbow & Strainer Assy.
(Male end (Screen end) - 1/8" pipe thread;
female end - 1/4" flare) NOTE: Must have
internal threads. Used w/ flair fitting; NOT
compression fitting.
ABC1182
$16.25
Main Jet Adjustment Needle Assembly
(For Zenith carburetors)
Fits: D10, D12 w/ carb 12401, 12577, 12749;
WC, WD w/ carb 9707, 10981, 14012
Replaces: 70223897
(3/8" x 24" thread) USA made
ABC1171
Fits: B, IB, C, CA, RC, D10, D12, D14, (D15
up to SN: 9001) (All w/ thru hood mufflers)
(3" O.D.; 24" body + 5" base = 29" o/a)
NOTE: Can't find your carburetor number? Look on page 340.
Price
Carburetors are limited to replacement only - NO refunds.
No replacement will be given if dirt, rust, etc. is found in the
carburetor or if it has been taken apart.
Price
ACS084
$375.50
ABC223
$324.50
Exhaust Stack (Straight)........................................ ACS230................$107.65
Exhaust Stack w/ Bend.......................................... ACS231................$125.95
NOTE: Customer must enlarge hole for B thru CA w/ 2-1/2" hood
exhaust hole.
Fits: D17 gas except series IV, WC, WD,
WD45 gas
(3-1/2" O.D.; 22-1/2" body + 6-1/2" base =
29" o/a)
Description
Order # Price
Exhaust Stack (Straight)........................................ ACS187................$115.35
Exhaust Stack w/ Bend.......................................... ACS186................$135.95
ABC297
$7.10
Choke parts
Order #
Price
ACS344
$24.95
ABC423
JDS718
$9.95
$18.75
Choke Rod
(27 1/8" o.a. length)
USA made
ABC564
$26.40
Universal Choke Cable
Fits: Tractors, Forklifts & other applications
using 72" or less cable NOTE: Metal
sheathed. Cut to length. Can also be used
as a 'Stop' cable for diesel engines.
Universal Choke Cable
Fits: Tractors, Forklifts & other applications
using 47"or less cable
(47" long) NOTE: Metal sheathed
w/ "CHOKE" on knob. Cut to length.
Carburetors, parts cont...
Price
Carburetors, parts
Order # www.SteinerTractor.com
Order #
Chrome; Double wall (Lined)
Order #
ACS2235 (Vertical oval body) Dimensions: Inlet
length: 2-3/4", Inlet I.D.: 2-3/8", Shell length:
16-1/4", Outlet length: 15", Outlet O.D.: 2",
Overall length: 34"
ACS2231
ABC2426
Price
Exhaust stacks - USA made
Fits: D17 gas SN: 42001 & up
Replaces: 70246129
USA made
8", Outlet O.D.: 2", Overall length: 29", If raincap
is needed - order RCS005 & if clamp is needed order ABC572.
Order #
Exhaust Pipe.............................................................. ACS2233............. $37.95
NOTE: Black finish.
12-1/2", Outlet O.D.: 1-3/4", Overall length: 27",
If raincap is needed - order RCS004 & if clamp is
needed - order ABC572.
Choke parts cont...
ABC557
$29.30
Carburetor
Fits: G w/ Marvel Schebler TSV 13
Replaces: 70800303
(1-13/16" c.c. carb mounting holes)
NOTE: Does not say "Marvel Schebler," but
has "TSV13" brass tag. Like original.
Carburetor New, Zenith Replacement
Fits: B, IB, C, CA, D10, D12, Replaces Marvel
Schebler: TSX 154, 159, 305, 422, 470, 486, 670,
701, 815, Replaces: 9705, 9706, 9797, 9804,
11141, 11142, 12401, 12522, 12566, 12749
USA made NOTE: Has 1-1/8" throttle bore.
May have to trim throttle shaft on some
applications. Will fit manifolds w/ 2-5/16" 2-3/8" c.c. stud holes because of the smaller
dia. studs that are included.
Main Carburetor Nozzle
(For Marvel Schebler carburetor)
Fits: B, IB, C, RC (All w/ TSX154, 305)
Replaces: 70222047, 47-270 USA made
Throttle Body Repair Bushing
(For small bowl Marvel Schebler carburetors)
Fits: B thru D15
(.383" O.D., .247" I.D., .501" long) USA made
NOTE: Repairs worn throttle body using
1/4" throttle shafts. Must ream to size.
Throttle Disc
Fits: B, IB, C, CA, RC, WC, WD, WF
(All w/ TSX154, 159, 305, 422, 470, 486)
Replaces: 70219971, 14-175
(15°, 1.105" O.D.) USA made
Choke Disc (For Marvel Schebler carburetor)
Fits: B, C, CA, IB, RC, WD45 (All w/ TSX154,
305, 464, 470), Replaces: 70219984, 27-530,
27-539 (1-5/16" O.D.)
USA made
Main Carburetor Nozzle
Fits: B, IB, C, WC, WF, WD (All w/ carb 9707,
9707A, 9707B, 10981, 10981A, S1203)
Replaces: 70223893, C66-47-50 USA made
$30.35
Choke Disc (For Marvel Schebler carburetor)
Fits: CA, D14, D15 (All w/ TSX670, 701, 815)
Replaces: 70229611, 27-573
(1-3/8" O.D.)
USA made
15
Carburetor floats cont...
Order #
ABC037
Price
$19.95
Carburetor gaskets - USA made
Order #
ABC543
ABC408
ABC410
ABC2275
Price
$1.95
$1.39
$1.49
$3.95
Manifold to Carburetor Gasket
Replaces: 70800304
(1-13/16" c.c. bolt holes, 15/16" center hole)
IHS575
Carburetor Gasket Kit
(For Big Bowl Marvel Scheblers)
Fits: Some WD45, D15, D17, 170 thru 185
Replaces: 70226470
NOTE: Fits same carb numbers as FDS212
economy kit
ABC454
ACS075
ABC036
ABC190
16
Price
$32.95
$11.95
$15.75
(For small bowl Marvel Schebler carburetors)
Fits: B, C, CA, D14, D15, IB, RC, WC, WD,
WF w/ TSX 154, 159, 305, 422, 470, 486, 670,
701, 815, 844; Power Units w/ TSX 305, 879,
912, 93, Replaces: 70219985, Marvel Schebler
30-600
Fits: B w/ carb 9635, A, 9636, A, 9706, 9804;
IB, C w/ carb 9635, A, 9636, A, 9706, 9804,
10697, 10698; CA; RC w/ carb 9492, 9507;
WC w/ carb 10981; WD, WF, D10 w/ carb
12577, A, 12749; D12 w/ carb 12749; D14, D15
w/ carb 8561, 8979, 9635, A, 9636, A, 9705
9706, 9707, 9797, 9804, 9805, 10697, 10698, A,
10699A, 10902, 10903, 10981, 11141, 11142,
12401, 12749, 12522, 12566, 14544; Power
Units w/ carb 10697, 12621, 12658, 14015,
14025, Replaces: Replaces: 70223920, Zenith
C85-28
ABC361
$23.60
Fits: D15, D17, WD45 (All w/ carb 12232);
170, 175 (Both w/ carb 11588, 12217, 12232,
12287A, 12590, 12722A, 12920, 13268, 13294,
13416, 14991), 180; Power Units w/ carb
13151, 13153, 13154, 13161, 13596, 13628,
13956, Replaces: 70227103
Basic carburetor repair kits contain: Throttle shaft, needle
Carburetor repair kits cont...
Order #
& seat, float lever pin, seal, gaskets & instructions.
Complete carburetor repair kits contain: Choke & throttle shafts,
needle & seat valve, float lever pin, miscellaneous plugs & screws,
Price
Price
ACS051
ABC552
$21.95
ABC1349
$24.95
Economy Carburetor Repair Kit
Fits: D17, 170 (both w/ carb 11588, 12217,
12232, 12590, 13294, 13416)
Replaces: Zenith K2048, K2049, K2050,
K2127, K2136
ABC1918
$34.95
Economy Carburetor Kit
(For Holley carburetors)
Fits: Early 190 w/ Holley # LIST2871,
LIST2871-1, LIST3257, LIST3257-1. Also fits
OEM carb #'s 4020206, 4020418, 4020985,
4020986 NOTE: Includes repair components
for acceleration pump, piston assy. spring,
and retainer. Float valve seat & diaphragm
not included.
$24.95
Fits: G, Power Units w/ TSV carbs
ABC220
$22.50
Fits: B, C, IB, RC (All w/ TSX 154, 305); CA
w/ TSX 470, 486, 670, 701, 815; D14 w/ TSX
670, 701, 815; D15 w/ TSX 815, 844; WC, WD,
WF (All w/ TSX 159, 422); H3, Power Units
(both w/ TSX 879, 912, 931, 986, 990)
ABC1346
$25.70
Fits: B, C, CA, D10, D12, IB, RC, WC, WD,
WF (All w/ carb S906, S1203, S1204, S1585,
8561, 8691, 8781, 8979, 9635, 9636, 9705,
9706, 9707, 9707A, 9707C, 9804, 9805, 10697,
10697A, 10698, 10698A, 10699, 10699A, 10902,
10902A, 10903, 10903A, 10981, 10981A, 11141,
11141A, 11142, 11142A, 12262, 12273, 12401,
12577, 12577A, 12749, 14544)
NOTE: Fits 61, 68, 161 series Zenith carbs.
ACS1343
$24.30
ABC222
$24.95
$22.80
$21.95
ACS306
$69.65
Basic Carburetor Repair Kit
Fits: G w/ TSV 13
ABC473
$37.75
Fits: B, IB, C, CA, RC (All w/ TSX 154, 305,
470, 486, 670, 701, 815)
ABC177
Fits: D15 w/ TSX 869; D17 w/ TSX 561, 869,
871; D19 w/ TSX 848; WD45 w/ TSX 464,
561, 773, 836, 871; 170, 175, 180, 185 (All w/
TSX 928); D Grader, Power Units (both w/
TSX 719, 853, 950)
Fits: D15 w/ TSX 591, 839, 863; Power Units
w/ TSX 783, 821, 876, 918
Basic carburetor repair kits
$38.50
Fits: WC, WF (both w/ carb 6793, 7071, 7078,
7078A, B, C, 7178, 7971)
FDS212
(For Zenith 63-11, 63-12, 69 series carburetors)
Fits: 190 w/ carb 12777, 13303, 13327, 13343
Replaces: 74046589
Fits: D19, 180, 190, 190XT (All w/ carb 12511,
12540, 12777, 12893, 13303, 13343)
Replaces: 4021805, 4022025; K2039, K2040
(Zenith kit); 4059661, 74062473 (kit)
Economy carburetor repair kits - USA made cont...
Economy carburetor repair kits - USA made
$55.40
(For Holley carburetors)
Fits: Early 190
Replaces: 74056661, LIST2871,2871-1,
LIST3257,3257-1
ABC1355
pin, seal, gaskets & instructions.
$29.50
Fits: D19 w/ TSX 848; Power Units w/ TSX
160, 268, 591, 621, 783, 786, 821, 848, 876, 918
Replaces: 74055431
ABC1352
Economy carburetor repair kits contain: Needle & seat, float lever
$35.75
Application
Fits: G, Power Units w/ TSV 13, 15, 16, 17,
18, 21, 22, 24, 27, 35, 37, 45, 47, 48, 49, 50, 52,
53, 54, Replaces: 70800472, Marvel Schebler
30-667
Order #
Fits: U w/ carb 10380, Power Units w/ carb
12504
ABC452
throttle shaft seals, adjustment screw & gaskets.
(For Zenith K5 carburetors)
Fits: M, U, UC (All w/ carb 6496, 6699, 6817)
(Fits OEM carb U1750, 2043, 2212)
Replaces: 70223922
Carburetor floats
Order #
Fits: D15, D17, WD45, 170, 175, 180, 185
(All w/ TSX 464, 561, 773, 869, 871, 928);
Power Units w/ TSX 466, 561, 719, 773, 853,
950, 992, 1001
Replaces: 70226456, Marvel Schebler 30-739,
30-631
$78.50
Fits: B, C, CA, D10, D12, D14, D15, D17, IB,
RC, WC, WD, WD45, WF, 170, 175
Replaces: 70233209
(2-3/8" - 2-7/16" slotted bolt holes,
1-1/8" center hole)
Fits: D19 gas
Replaces: 70238174
(2-15/16" c.c. bolt holes, 1-3/4" center hole)
Application
Carburetor repair kits
Fits: WC, WD, WF (All w/ TSX 159, 422)
ABC216
$39.95
Fits: D17, WD45 (both w/ TSX 464, 773, 871)
Carburetor repair kits continue on next page
17
Allis Chalmers: Cooling parts
Order #
MHS045
Carburetor repair kits cont...
Basic carburetor repair kits contain: Throttle shaft, needle
& seat, float lever pin, seal, gaskets & instructions.
Price
ACS2626
$450.00
needle & seat valve, float lever pin, miscellaneous plugs & screws,
throttle shaft seals, adjustment screw & gaskets.
Price
$40.75
ACS1385
ABC1311
ABC178
$48.50
$43.20
$45.95
$53.50
ACS128
$273.00
(For Zenith K5 carburetors)
Fits: IU, M, U, UC (All w/ carb 6496, 6699,
6817) (Fits OEM carb U1750, 2043, 2212)
Complete carburetor repair kits
ABC232
ACS114
$295.95
Complete Carburetor Repair Kit
Fits: B, IB, C, RC (All w/ carb 9705, 9706,
9804, 10697, 10698, 10698A, 10902A, 10903A)
(Fits OEM carb 211954, 224640, 224641)
(For Zenith carburetor)
Fits: CA w/ carb 11141, 11142
(Fits OEM carb 225621, 225622)
(For Zenith carburetor)
Fits: RC w/ carb 9492, 9507
(Fits OEM carb 209662, 209663)
Fits: WC, WD, WF (All w/ carb 8979, 9707,
9707A, 9707C, 10981, 10981A) (Fits OEM carb
209312, 213348, 224749)
ACS109
Price
ACS182
$7.95
ACS304
18
$12.50
ACS172
$19.95
Radiator (Pressurized)
Fits: B, IB, C, CA, (D10 up to SN: 3501),
D12 up to SN: 3001, Replaces: 70232113
(CORE measurements: 14-3/4" height,
15" width, 2-1/4" depth. These are not
overall dimensions) NOTE: Must use
ACS209 or ABC008 radiator caps only.
Radiator (Pressurized)
Fits: Styled WC, WD, WD45 gas, WF
Replaces: 70228587
(CORE measurements: 18-1/2" height,
18" width, 1-3/8" depth. These are not
overall dimensions) NOTE: Will fit tractors
w/ 4 blade fan only, not 5 blade fan. Fan
shroud opening is 17-1/8" so customer may
have to trim to clear or order ACS183 Fan.
Radiator
Fits: D17 gas
Replaces: 70229702
(CORE measurements: 19-1/4" H, 18" W,
2" D. These are not overall dimensions)
ABC455
ABC209
$2.95
$2.95
Governor Control Rod Spring
(2-1/2" o/a length; 11/16" O.D.)
USA made
ACS192
Governor Rod Linkage Spring
(For distributor or magneto ignition)
Fits: B, IB, C, CA, D10, D12, D14, D15, RC,
I-40, I-400, I-60, I-600, Replaces: 70212321
ACS249
Underside view
$30.95
$29.95
Radiator Mounting Pad
Fits: Most Allis Chalmers models
(2" x 2", 1/4" thick)
NOTE: 2 used per tractor; Sold individually.
Radiator Drain Plug
Fits: B thru 8550
Replaces: 912415
(1/4"-18 NPT) USA made
NOTE: See website for full applications.
Lower Water Pipe
Replaces: 70227184
(1-1/8" O.D. x 10)
Lower Water Pipe
Fits: D10, D12, D14, D15 gas, LP
Replaces: 70233431
Application
(For Non-Pressurized systems)
Correct for B up to SN: 101; Serviceable
for B up to SN: 61222 & C up to SN: 18580
(ACS172 is correct for these applications)
Replaces: 70206459
(1.761" tang length)
Fits: B up to SN: 61221, IB to SN: 1000,
C up to SN: 18580, RC, Styled WC,
Styled WF, Replaces: 70207244
NOTE: Fits original radiator only, not
aftermarket. Original style.
Radiator hoses, clamps
Order #
Price
ACS208
$2.55
ABC055
$5.25
ABC406
$6.95
ACS259
(Upper)
$14.90
MHS043GK $1.75
Gasket only (For ACS172)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
IHS337
$9.95
Underside view
IHS239
$1.95
ABC008
(4 PSI)
$8.75
$499.75
Governor springs
Order #
Underside view
Basic carburetor repair kits cont...
IHS574
$11.95
NEW! Radiator
Fits: G
Replaces: 70800056
NOTE: Available Spring 2014!
Complete carburetor repair kits contain: Choke & throttle shafts,
Order #
Price
Radiators, parts
Order #
Radiator caps w/ gaskets
Gasket only
(For IHS337 Cap)
(3.563" O.D., 1.875" I.D., .125" thick)
NOTE: NBR rubber.
ACS257
(Lower)
$15.90
ACS2248 $12.50
Underside view
ABC1396
(7 PSI)
(For Unpressurized systems)
Fits: Unstyled WC, Unstyled WF,
Power Unit: W201
Replaces: 70206622
(2.886" O.D., 0.398" tang width,
1.845" inside center dia.)
$8.95
(For Pressurized systems)
Fits: B SN: 61221 & up, C SN: 18581 &
up, CA, G, RC, WC SN: 74430 & up, WD,
WD45, WF, Replaces: 70228545
(1.500" radiator neck I.D., 2.330" O.D.,
2.000" tang to tang)
ACS2252 $12.95
$12.00
Fits: B SN: 61221 & up, C SN: 18580 & up,
CA, D10, D12, D14, D15, D17, D19, D21, G,
H3, HD3, WC SN: 74430 & up, WD, WD45,
170, 175, 180, 185, 190, 190XT, 200, 210, 220,
I-40, I-400, I-60 & I-600, 7000, 7010, 7020,
7030, 7040, 7045, 7050, 7060, 7080, 7580,
8550, Replaces: 70254891
NOTE: Original style.
Radiator Hose (Upper / Lower)
Fits: B, IB, C, CA, D10, D12, D14, RC
Replaces: 70207173
(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long)
Radiator Hose (Upper/Lower)
Fits: (Upper for WC, WD, WD45, WF); (Lower
for Early D17 diesel up to SN: 38963)
Replaces: 70233153
(1-7/16" I.D., 10" long, 1-13/16" O.D.)
Radiator Hose (Lower)
Fits: WC, WD, WD45 gas, WF
Replaces: 70203090
(1.485" I.D., 1.875" O.D., 5.485" long)
Radiator Hose
Fits: D17 gas, ACS259 Replaces: 70229636
ACS257
Replaces: 70229209
(1-1/2" I.D., 1-13/16" O.D.)
Water ByPass Hose
Fits: WD45, W226 gas Power Unit SN: 50789
& up, Replaces: 70227018
USA made
Water ByPass Hose
Fits: D17, 170, 175 gas, LP
Replaces: 70229341
ABC492
$2.70
Clamp (For Upper / Lower)
Fits: B, IB, C, CA, D10, D12, D14, RC
Replaces: 911290
(For 1-5/8" hose O.D.)
NOTE: Will fit ACS208 radiator hose.
FDS258
$3.60
Clamp (For Upper / Lower 1-3/4" to 2" O.D.
Radiator Hose)
Fits: D17 gas, Early D17 diesel up to SN:
38963, WC, WD, WD45 gas, WF
Replaces: 921912, 921913
NOTE: Will fit ACS259, ACS257, ABC055,
ABC406 radiator hoses.
Underside view
ACS209
19
Water pumps cont...
Order #
Price
ACS229
$135.22
IHS913
ABC1086
ABC052
ACS1214
ACS1219
Price
$34.95
$13.50
$11.50
$49.95
Thermostat fits the following equipped
w/ 4-bolt water manifold bypass: B w/
engine SN: 126210 & up, C w/ engine SN:
60157 & up, CA w/ engine SN: 195136 & up;
All D10 thru D-17, WD45, 170, 175 gas, LP
Replaces: 226505, 70229927
(160º Temp)
Thermostat
Fits: D10, D12, WC, WD, WF
Replaces: 70210157
(180º Temp)
USA made
Thermostat
Fits: D21, 210, 220, 6040, 7000 thru 8070
Replaces: 704025103, 72080437
(160º Temp)
USA made NOTE: Gasket included fits Ford
models only.
Thermostat Housing Bypass Cover
Fits: WD45, D17, 170, 175, (W226 Power Unit
SN: PO97614 & up) gas; Combines: E3, K gas
Replaces: 70262804
NOTE: If gasket is needed order ACS1571
gasket.
Description
Thermostat Housing Gasket only
Fits the following w/ 201, 226" gas, LP: D17,
WC, WD, WD45, WF, 170, 175
NOTE: Cork.
Order # $125.65
ABC016
$12.25
ACS258
$29.95
ABC109
$12.25
Price
NOTE: Verify belt size before ordering.
Order #
Price
ABC059
$11.80
ABC009
$12.60
ABC010
$14.95
Application
Fits: G, (WC, WF both w/out generator)
Replaces: 800116, 70203073
(Notched; 5/8" x 40")
ACS1833 $29.95
Fits: B, IB, C, CA, D10 up to SN: 3501, D12 up
to SN: 3001, D14 (All w/ generators)
Replaces: 70209656
(5/8" x 36-1/2")
Fits: WC, WD, WD45 gas, WF (All w/
generators)
Replaces: 70209824
(5/8" wide x 45-1/2" long)
ABC466
Application
Oil pressure gauges w/ stainless stainless bezel
NOTE: ACS Gauges have a metal base, glass lens & stainless steel
bezel. Includes "ALLIS CHALMERS" name. For 2" diameter hole.
(20-0-20)
Fits: B, IB, C, CA, G, WC, WD, WD45,
WD45 diesel, WF, RC
Replaces: 70208302
NOTE: No logo.
ABC Gauges have a stainless steel bezel & vary from original
appearance. Does not include "ALLIS CHALMERS" name.
When ordering a dash mounted oil pressure gauge you will also
need to order (1) of the following fittings depending on the line
size to adapt your existing line to the gauge: ABC538, IHS626.
Order #
Price
(30-0-30)
Fits: B, C, CA, D10, D12, D14, D15, D17,
D19, D21, G, H3, HD3, RC, WC, WD, WD45,
WD45 diesel, WF, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, Replaces: 70254407
NOTE: Includes "Allis Chalmers" name.
ACS159
$29.95
(30-0-30)
Fits: D10, D12, D14, D15, D17, D19, D21, 170,
175, 180, 185, 190, 190XT, I-40, I-400, I-60,
I-600, Replaces: 70254407
NOTE: No logo.
ABC004
$18.95
ACS160
$29.95
(0-30 PSI)
Fits following gas, LP: D10, D12, D14, D15,
D17, I-40, I-400, I-60, I-600
Replaces: 70228718, 70228719
(1/8" NPT male thread)
NOTE: Dash mounted. Includes "Allis
Chalmers" logo, line adapter sold separate
ACS262
$34.95
(0-80 PSI)
Fits the following gas: Some A, D19, (U, UC
up to SN: U15344 w/ dash mounted gauge);
Fits the following diesels: D15, D17, D19,
WD45, Replaces: 70232546
(1/8" NPT male thread) NOTE: Dash
mounted. Includes "Allis Chalmers" name.
ABC082
$18.95
ABC005
$18.95
(60-0-60)
(For tractors converted to 12-v system)
Fits: B thru WD45; D10 thru D21;
160 thru 220
NOTE: Includes "Allis Chalmers" logo.
See website for more applications.
$14.95
(60-0-60)
Fits: B thru 220 w/ Alternator system
NOTE: No logo.
ABC1648 $14.50
Fits: D17, D19 gas, LP, 6040 (fan)
Replaces: 70229211
(17/32" x 45-1/4")
$11.55
Fits Deutz-Allis: 5220, 5230 (both fan/alt)
Replaces: 71131774, 70237386
(1/2" x 41-1/4")
Application
Fits: B, IB, C, CA, D10, D12, D14, (Early D15
w/ sheet metal pulley), RC
Replaces: 70250397
Price
Fan belts
NOTE: NEW; No core charge
ACS227
Order #
Fan Blade (4 Blade).................................................. ACS183............... $22.30
Water pumps
Price
Fits: D17 gas, diesel, WC, WD, (WD45 gas,
diesel), WF, Replaces: 70240973
(16-7/8" O.D. tip to tip, 3-7/8" blade width,
1" pilot, 1-1/4" c.c. bolt holes, 5/16" bolt hole
dia.)
ABC414
Order #
Fan blade
$49.95
$6.50
NOTE: ACS Gauges have a glass lens & stainless steel bezel.
Includes "ALLIS CHALMERS" name. For 2" diameter hole.
Fits: WC, WD, WD45 gas, WF
Replaces: 70250396
Thermostat Housing Cover
Fits: WC, WD, WF
Replaces: 70262805
NOTE: If gasket is needed order ACS1571.
ACS1571
Allis Chalmers: Gauges
Thermostats, parts
Order #
Application
Amp gauges w/ stainless steel bezel - USA made
FDS1453
$12.50
Fits: 6060, 6070, 6080 (fan/alt)
Replaces: 70263408
(1/2" x 53-1/4")
FROM OUR CUSTOMERS!
I just wanted to let you know how helpful
your tech was
In just a few moments on the phone with Jr. he was
able to point me in the right direction, when many
others steered me away. Due to his vast knowledge of
Allis Chalmers tractors, he had my D14 back in the field
before this season ended up bad. Thank you so much!
I am definitely a customer for life. - Rob M.
Application
(0-30 PSI)
Fits: B, C, CA, G, IB, RC, WC, WD45; Some
U, UC (Both w/ SN: 15345 & up &
w/ engine mounted oil pressure gauge)
Replaces: 70203805, U3805
(1/8" NPT male thread) NOTE: Engine
mounted. Includes "Allis Chalmers" name.
Screws into oil filter housing.
(0-30 PSI)
Fits: B, IB, C, CA, G, RC, WC, WD, WD45,
WF, Replaces: 70207834
NOTE: Engine mounted. Screws into oil
filter housing. No logo.
(0-50 PSI)
Fits: D10, D12, D14, D15, D17 series I & II,
I-40, I-400, I-60, I-600, WD45 diesel
Replaces: 70228719
NOTE: Dash mounted. No logo.
(0-80 PSI)
Fits: D15 diesel thru 220
Replaces: 70200197
NOTE: Dash mounted. No logo.
Oil pressure gauges, parts continue on next page
20
21
Tachometers / operation meter, parts
Order #
ACS311
Price
Price
ABC523
$23.95
ABC538
IHS626
$13.40
$12.85
Tachometer / Operation Meter
Fits: D10 & D12 both up to SN: 9000
Replaces: 70232189 (tachometer), 70232177
(1 bracket), 70232176 (mounting clamp)
NOTE: Has AC logo.
Application
Oil Gauge Copper Line Kit
For tractors using 1/8" x 6’ copper oil line
(6’ - 1/8" line, (2) 5/16 - 24 UNF Nut,
(2) compression sleeves, (1) 1/8 - 27 NPTF
female to 5/16 - 24 UNF male adaptor,
(1) 1/8 - 27 NPTF)
NOTE: Use w/ ABC538 fitting.
Oil Gauge Fitting
For gauges w/out removable fitting
Replaces: 919095
(1/8" pipe thread to 1/8" tube) USA made
NOTE: Brass. Use w/ ABC523 line kit.
ACS312
$28.00
JDS1802
$39.95
ACS265
$78.95
Oil Gauge Fitting
For gauges w/out removable fitting
(1/8" pipe thread to 1/4" tube) USA made
NOTE: Brass.
Water temperature gauges w/ stainless steel
bezel
Includes "ALLIS CHALMERS" name. For 2" diameter hole.
Price
ACS064
$29.95
Application
ACS289
$48.50
ABC239
$27.25
ABC1593
$29.95
Fits: D10, D12, D14, D15 gas, diesel, D17 gas,
diesel, WD45 diesel, Replaces: 70235724
(70" LEAD 5/8"-18 U.F. END W/ 1/2" NPT
PIPE BUSHING)
NOTE: Dash mounted. Includes "Allis
Chalmers" logo
Fits: D10, D12, D14, D15, D17, D19, I-40,
I-400, I-60, I-600 gas, diesel; WD45 diesel
(110º - 230º temperature range, 90º pointer
sweep, 72" lead, 5/8-18 UNF w/ 1/2" pipe
bushing) NOTE: Dash mounted; No logo.
Fits: D10 thru D17
(60" lead)
NOTE: Dash mounted, No logo.
22
$34.95
ACS1230
JDS790
$29.95
ACS1505
$174.95
ACS1912
$14.50
ACS1915
$14.50
Description
Tachometer Drive Adaptor
Fits: D10, D12, D14, D15, D17, I40, I60, I400,
I600, 615 gas, LP, Replaces: 70228768
(1.561" o/a length, 0.095" key width,
.302" O.D)
USA made
Electric panels
$9.95
$125.00
Fits: 190 up to SN: 20599
Replaces: 70243569
NOTE: Tachometer is driven off camshaft.
ACS303
$124.95
Price
Allis Chalmers: Electrical parts
2-piece Tachometer Drive Gasket Kit
Fits: D21 thru 220
Replaces: 70246044, 70251845
USA made
ACS294
Order # Traction Booster Gauge........................................... ACS124............... $99.95
w/ "Allis Chalmers" name
NOTE: Functional, like original!
Threaded nipple
Fits: D10, D12, D14, (D15 gas, LP, diesel),
D17 gas, LP w/ manual steering, I40, (I60
gas, LP), I400, (I600 gas, LP), 615 gas, LP
Replaces: 70228769 (Zinc dichromate;
3/4"-20 pipe thread to 7/8"-18, 1.413" long)
USA made
$174.95
Tachometer Cable w/ Metal Sheath
Fits: D17 gas
Replaces: 70229751, (cable), 70261608
(key end)
(56" long w/ key)
Fits: CA, (D10 up to SN: 9199), (D12 up to
SN: 9167), D14, (D15 up to SN: 9000), D17
up to SN: 75000), D19, WD, WD45
Replaces: 70235598
(1/4" male flare end)
Fits: D21
Replaces: 70239731
ABC1822
Fits: D17 diesel
Replaces: 70230062, 70242374
NOTE: Has AC logo.
Traction booster gauge
$34.95
Fits: D17 diesel, D19 diesel
Replaces: 70261604 (cable), 70261608 (key)
(61-1/2" long w/ key)
ACS278
Fits: D14, D15 gas
Replaces: 70228767, (cable), 70261609
(key end)
(47" long w/ key)
Fits: D19 gas, diesel
Replaces: 70236655
Fits: D15 gas SN: 6631 & up, I-60, I-600
Replaces: 70236777
ACS1228
$174.95
Tachometer Cable w/ Nylon Sheath
Serviceable for D10 & D12 both up to
SN: 9000
(43-1/8" long w/ key)
NOTE: Measure before ordering.
$124.00
Fits: B, IB, C, CA, RC, WC, WD, WD45, WF
Replaces: 70213675
NOTE: Threads into radiator neck.
Includes "Allis Chalmers" logo.
ACS260
Tachometer Cable w/ Nylon Sheath
Fits: D10 & D12 both up to SN: 9000
Replaces: 70244104
(41-3/8" long w/key)
NOTE: Measure before ordering.
Price
Fits: D14, (D15 gas up to SN: 6630),
D17 gas, I-40, I-400
Replaces: 70242376, 70276770, 70277450
NOTE: Has AC logo.
ACS Gauges have a metal base, glass lens & stainless steel bezel.
Order #
Order #
ACS296
$189.95
Oil pressure gauges, parts cont...
Order #
Tachometers / operation meter, parts cont...
Fits: 190 SN: 20600 & up, 190XT gas, diesel
Serviceable for 180, 185, 200, 210, 220
Replaces: 70252409, 70255036
NOTE: Tachometer is driven off alternator.
Must use w/ 12 & 45 tooth drive gears.
Order #
Price
ACS338
$44.95
ACS299
$49.90
Instrument Panel
Fits: G
Replaces: 70800124
USA made
Electric Box Panel (Front & Rear)
Fits: B, IB, C, CA
Replaces: 70225309 (front), 70210914 (rear)
ACS353
$74.95
ACS197
$27.45
Instrument Panel Trim w/ 1/2" swirls
Fits: D15 SN: 9001 & up, D17 SN: 32001 75000, D19, Replaces: 70234433
USA made
NOTE: Stainless steel w/ 1/2" machine
turnings.
Electric Box Panel (Rear)
Fits: RC, WC, WF
Replaces: 70208129
23
Battery boxes, parts - USA made
Order #
Price
ACS063
$85.75
Electrical outlet socket, parts
Order #
Price
ABC395
$24.95
ABC1868
ABC2285
$19.95
Electrical Outlet Socket
(For Implements w/ lights)
(2 pin type)
NOTE: 2 plated brass pins.
Auxiliary Male 2-Pin Connector Plug
(For ABC395)
Replaces: 70227303
(3.045" long, .760" wide, .340" hole dia. for
wires) NOTE: Plated brass pins, wires
must be soldered or crimped.
ACS1260
$36.95
ACS029
$85.75
$4.95
NEW! Electrical Outlet Socket Boot
Fits: Tractors using single wire outlet
NOTE: 1 wire style. Does not fit ABC395.
Battery cables - USA made
ACS072
ACS030
$85.75
$85.75
Heavy Duty; Straight terminals
unless otherwised noted
EO = Eyelet Opening
L = Length
ACS193
Order #
Price
ABC401
$13.90
(2 Gauge, EO = 7/16", L = 6")
ABC411
$15.80
(2 Gauge, EO = 7/16", L = 9")
ABC405
$17.95
(2 Gauge, EO = 1/2", L = 13")
ABC1175
$17.30
(2 Gauge, EO = 7/16", L = 14")
ABC421
$22.50
(2 Gauge, EO = 3/8", L = 19")
ABC403
$25.85
(2 Gauge, EO = 7/16", L = 24")
ABC407
$16.99
(2 Gauge, EO = 3/8", L = 10-1/2")
ABC415
$15.40
(2 Gauge, EO = 3/8", L = 12")
ABC413
$19.15
(2 Gauge, EO = 3/8", L = 14-1/2",
90º terminal ends)
$104.95
Specifications
Ground Cables (Non-Insulated)
ACS195
$89.95
Insulated Battery Cables
ABC1582
$12.15
(2 Gauge, EO = 3/8", EYELET BOTH ENDS,
L = 16-1/4")
ABC417
$18.50
(2 Gauge, EO = 3/8", L = 21")
ABC419
$19.95
(2 Gauge, EO = 3/8", L = 27")
24
ACS1509
ACS063L
$29.95
$34.95
Battery Box w/ Lid
(Inside dimensions: 7-3/16" wide x 8-3/4"
tall x 9-3/4" long)
NOTE: Persian orange #1 powder coat.
Order #
Price
FDS369
$22.50
IHS721
$8.95
Battery Box Bracket Set (2-Piece)
Fits: G, Replaces: 70800105 (upper),
70800109 (lower)
Battery Box w/ Lid
Fits: B, C, CA
Replaces: 70226026
tall x 9-3/4" long)
Battery Box w/ lid
Fits: RC, WC, WF
Replaces: 70224539
(Inside dimensions: 7-5/8" wide x 8-3/4" tall
x 9-1/8" long)
NOTE: Mounts on side of frame.
Battery Box w/ Lid
Fits: WD, WD45 gas
Replaces: 70224540
tall x 9-3/4" long)
Dash not included; must re-use old dash.
Battery Box w/ Lid
Fits: WD45 diesel
Replaces: 70226951
(Inside dimensions: 9" wide x 8-3/4" tall
x 14-1/16" long)
Battery Box w/ Lid
Fits: D10, D12
Replaces: 70233332
tall x 9-3/4" long)
NEW! Battery Hold Down
Fits: D17 gas up to SN: 24000 using Group 1
battery, Replaces: 70229487
(9-3/16" wide x 7-1/16" long; Mounting
holes c.c. = 10-1/8") NOTE: 16 gauge steel.
New & improved quality!
Battery Retainer J-Bolt (Pair)
(5/16"-18" UNC x 10-3/4") Imported
Wiring harness kits - USA made
Cigarette lighters
NOTE: Anodized aluminum knob engraved w/ the word
"LIGHTER".
Order #
Price
ABC1862
$29.95
IHS949
$29.95
NOTE: Includes light wires and diagram. Original style braiding w/
soldered terminals. Restoration quality.
Order #
ACS329
Price
Application
ACS335
6-volt Cigarette Lighter w/ Socket
Fits: Early D14 up to SN: 19000
w/ 6-volt system
Replaces: 70230228
Original Style 12-volt Cigarette Lighter
w/ Socket
Fits: D14 SN: 19001 & up, D17
Replaces: 70232810
Ignition parts
Order #
Price
ABC498
$14.95
Terminal Insulator Assembly (Round style)
(For Delco distributor)
Fits: G, Replaces: 1847646, 1847647, 1878405
NOTE: Fits distributor housings
w/ .345" dia. round hole.
ABC500
$14.95
Terminal Insulator Assembly (Square style)
(For Delco distributor)
Fits: B, IB, C, CA, D10, D12, D14, D15, D17,
D19, RC, WC, WF, WD, WD45
Replaces: 70225791, 70225792, 70225793,
70225794, 70225795 NOTE: Fits distributor
housings w/ .300" dia. hole w/ keyway.
ABC011
(6-volt)
$19.95
$168.50
(For 6-volt generator systems only)
Fits: B, IB SN: 55301 & up, C, CA w/ cut-out
Replaces: 70225591
ACS352
$133.75
Fits: G w/ cut-out
Replaces: 70800136
$168.50
Fits: RC, WC, WF w/ cut-out
Replaces: 70208322
Coils / Resistor
ACS331
$168.50
Fits: WD, WD45 gas w/ cut-out
Replaces: 70222532
ACS2260
$218.50
(For 6 & 12-volt generator systems)
Fits: D14, D15 series I (up to SN: 8169) gas
Replaces: 70228375, 70230083
Battery Box Side Cover
Fits: B, C, CA, D10, D12, D14, D14 AUX,
W226, WD, WD45
Replaces: 70222525
Battery Box Lid only
Fits: G, B, C, CA, D10, D12, WD, WD45 gas
Replaces: 70210907
Battery boxes, parts - USA made cont...
Fuse holder
Fits: D10, D12, D14, D15, D17, D19, D21, 180,
185, 190, 190XT, 200, 210, 220
Description
Order # ABC509
(12-volt)
$19.95
ABC348
$57.10
Price
Fuse Holder............................................................... ABC389.............. $10.95
NOTE: Rated at 20 AMP; Fits in 1/2" hole.
Distributor Coil (Metal Housing)
& Mounting Bracket
ABC011 Replaces: Delco 1115379, D502,
70247333
ABC509 Replaces: Delco 1115380, U505,
74514967
NOTE: ABC509 is internally resisted.
See website for full applications.
HOT" Coil (55000-Volts)
Fits: 12-volt systems
USA made NOTE: Maximum voltage for
faster starting, reduced plug fouling &
longer plug life. Must use w/ ABC366
resistor.
Ignition parts continue on next page
25
Order #
ABC488L
(31/32"
Bracket)
Ignition parts cont...
Order #
ABC366
Price
$7.75
Price
Universal 12-volt Voltage Resistor
(2-Terminal Style)
Replaces: 70241266 NOTE: Used to step
down 12-volt battery. Limits voltage to
coil when using 12-volt battery. 1.5 OHMs
on 6-volt battery to 4.0 OHMs for 12-volt
battery. Resistor gets very hot.
ABC488S
(11/16"
Bracket)
$14.95
Dust Covers
ABC186
ABC2428
$9.80
$14.85
Dust Cover w/ Felt, Gasket & Washer
(For Delco-Remy w/ clip held cap)
D19, G, RC, WC, WD, WD45, WF
Replaces: 70225734, Delco 1900119
NEW! Dust Cover
(For Delco screw held cap)
Fits: 170, 175, 180, 185, 190XT
Replaces: 74056699
(3.300" O.D., 1.047" tall, (2) 0.210" screw
holes)
ABC330
ABC141
ABC420
$9.50
$11.35
$10.95
Distributor Cap (For EARLY Delco
Distributor w/ clip held cap thru 1963)
G, H3, RC, WC, WD, WD45, WF
Replaces: 70225733, Delco 811735
Distributor Cap (6-cyl) (For EARLY Delco
Distributor w/ clip held cap)
Fits: D19, & 6-cylinder Combines using
Delco 824735, Replaces: 74042704
USA made
Distributor Cap (For LATE Delco
Distributor w/ screw held cap)
Fits: 170, 175
Replaces: 74058876
ABC2523
$6.95
ABC556
26
$2.50
Distributor Mounting Gasket
Fits: B, IB, C, CA, RC, WC, WD, WF
NEW! Distributor Hold Down Clamp
(For 3/8" hold down bolt)
Fits: B thru 175 (All w/ distributor)
Replaces: 70225344
NOTE: 2 used per engine; Sold
individually. See website for all
applications.
Distributor Tags
ABC511
(6-volt)
$14.45
ABC514
(12-volt)
$14.45
Distributor Tag w/ (2) Rivets
(For Delco Remy Distributor)
Fits: Tractors & Industrial
(2.5" long, .800" wide, .150" dia. rivet hole,
2" c.c. rivet holes)
USA made
NOTE: Stamped w/ raised letters.
Customer must stamp numbers.
Order #
Price
ABC326
$19.85
ACS1548
ACS1552
ACS309
$34.90
$35.95
FDS149
$18.95
$14.25
ACS228
$15.95
Spark Plug Wiring Set w/ Straight Boots
(Preassembled)
RC, WC, WD, WD45, 170, 175, I-40, I-400,
I-60, I-600 (All w/ Distributor)
NOTE: These wires have a copper core w/
aluminum coating to prevent corrosion,
waterproof neoprene.
Spark Plug Wiring Set w/ 90º Boots
Fits: 4-cyl. models USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
Spark Plug Wiring Set w/ Straight Boots
Fits: 4-cyl. models USA made
NOTE: Copper core w/ aluminum
coating to prevent corrosion, waterproof
neoprene. Cut to length.
Spark Plug Wiring Set w/ 90º Boots
Fits: 6-cyl. models
NOTE: Copper core, waterproof neoprene.
Cut to length.
Tailored Spark Plug Wiring Set
Fits: B, IB, C, RC (All w/ Magneto)
Replaces: 70213505 (4 wires measure 7",
9-3/4", 11-1/2", 12-1/2) USA made
NOTE: Original type preassembled,
cotton braid w/ copper wire.
Tailored Spark Plug Wiring Set
Fits: B, C, CA (All w/ Distributor)
Replaces: 70225613
(5 wires measure 7-1/4", 9-3/4", 12-1/4",
16-3/4", 13" coil wire) USA made
NOTE: Original type preassembled,
cotton braid w/ copper wire.
Order #
Price
Spark Plugs (Autolite) cont...
ABC183
$4.25
Fits: UC w/ 14 mm threads
ABC183 specifications: 14 mm thread, 3/8" reach, 13/16" hex,
Autolite 306, Plug Gap .025
ABC171
$5.20
Fits: some Industrial applications
Autolite 388, Hot hear range, Std Tip / Resistor, Plug Gap . 030
ACS110
$25.95
ABC018
$10.75
ABC333
$9.10
$1.45
Spark Plug Wire Grommet
Fits: G
Replaces: 70800261
Spark Plugs (Autolite)
ABC168
$4.25
Fits: B, IB, C, CA, D10, D12, D14, Early D15,
(D17 up to SN: 75000), G, H3, RC, WC, WD,
WF
ABC169
$7.20
Fits: K, L, M, U
ABC169 specifications: 7/8" x 18 mm thread, 5/8" reach, 15/16" hex,
ABC323
Ignition Tune-Up Kits
Wire Loom Holder
Fits: G
Replaces: 70800260 (bracket), 70800261
(grommet) USA made
ABC1897
$29.95
Spark Plug Wiring Sets, part
ACS287
$9.45
Distributor Cap (For Delco Distributor
w/ screw held cap)
Fits: 180, 190
Replaces: 74056696, Delco 1960810
Bracket Distributor Cap Spring Clip
(For Delco distributor and clip held cap)
D19, G, RC, WC, WD, WD45, WF
Replaces: 70225774, 70225775 (bracket)
(2-1/4" o/a length)
Distributor Clamp
Distributor Caps, parts
ABC276
$14.95
$3.80
(For Delco Distributor)
Fits: B, IB, C, CA, D10, D12, D14, (Early
D15, Early D17 w/ 3/8" reach), G, H3, RC,
WC, WD, WF (4-cyl. gas)
Replaces: 70243507, 70225736, 9001652
NOTE: Kit contains: Spark plugs, heavy
duty points, condenser & rotor. Spark
Plug Gap .030, Point Gap .020
(For Delco Distributors w/ clip held cap
thru 1963) fits: All 4-cyl. models; D19 6-cyl.
wheel tractor; Combines: A, B, C, E
Replaces: 70243507, 70225736
NOTE: Kit contains: Points, condenser &
rotor. Point Gap .020.
(For Delco-Remy Systems w/ screw held
cap) fits: 170, 175, 180, 185, 190, 190XT
Replaces: 79001128, 79001168
NOTE: Kit contains: Heavy duty point
set, vibration resistant condensor & rotor;
Point Gap .025
Rotor Button
ABC520
Fits: D17 SN: 75001 & up, H4, 170, 180, 190,
190XT
$3.95
(For Delco-Remy Distributor w/ clip held
cap) fits: B, IB, C, CA, D10, D12, D14, D15,
D17, D19, G, RC, WC, WD, WD45, WF
Replaces: 70225736, 1921285
27
Starters, parts cont...
Order #
Price
Starter Rod, Foot / Lever Switch & Levers cont...
FXG1008
Fairbanks Morse (FM series) magneto parts
ABC556
XHGK
ACS275
$7.95
The following parts (Sold separately) will fit XH894, XH3001,
XB2065 WICO Magneto:
Order #
FM04
FM01
ABC556
FM05
Order #
FM04
FM01
Price
$25.60
$9.25
FM02
FM03
ABC1185
Point Set fits: FM-J, FM-J4-B3, FM-JE, JM-JG,
FM-T w/ clockwise rotation & 2 piece cap
NOTE: Point Gap .020; See our website for
a full application listing.
$79.95
End Cap fits: FM-J4, FM-OX4, FM-B1
USA made
FM03
$16.75
Rotor fits: FM-J4, FM-JV4, FM4B, FM-ZV4
(All w/ 2-piece cap) USA made
NOTE: Clockwise rotation
FM05
$85.10
Coil fits: Most multi cylinder FM series,
FMJ2B6D (All w/ 2-piece cap) USA made
ABC556
$2.50
Mounting Gasket fits: Multi cylinder FM
series magnetos, Replaces: 70233212
USA made
ABC1185
$10.65
XH894
$15.25
Condensor
FXH2403
$57.50
Coil
FXG2002A-2
$60.15
Cap
FXG1008
$33.95
Rotor
ABC556
$2.50
Mounting Gasket USA made
XHGK
$4.05
Gasket (For cap)
Price
ABC1366
ABC1179
$29.95
$34.95
$19.95
Magneto Gasket Set fits: Multi cylinder FM
series magnetos (All w/ 2-piece cap)
USA made
Price
ABC508
$5.35
$414.50
ABC506
$5.30
ACS342
ABC012
28
$7.95
ABC066
$16.40
ACS324
$69.45
12-volt Solenoid Switch
(3 Post Saddle Mount)
Fits: D10, D12, D14, D15 gas, D21, I-40, I-400,
I-60, I-600, 170, Replaces: 70237136
NOTE: 12-volt systems only.
12-volt Starter Solenoid (4 Terminal)
(For 30, 35 MT series Delco starters)
Fits: D17 w/ starter 1113082, 180 thru 7020
(All diesel), Replaces: 70243828, 79017977
12-volt Starter Solenoid (3 Terminal)
(For Delco Starters) fits: 160 w/starter
1107860, 170, 175 (All diesel); 180, 185, 190 w/
starter 1107356 (All gas); Combines: E3 thru
M2 gas, Replaces: 70243857
ABC1203
ABC1939
$17.95
$17.95
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 18 NC starter
terminals)
NOTE: Brass.
Starter or Solenoid Terminal Repair Stud
(For tractors using 5/16" x 24 NF starter
terminals)
NOTE: Brass.
$24.95
FXH2024
FXH2403
FXG2002A-2
$11.95
Starter Rod
(21-3/4" o/a length)
USA made
Starter Switch (Saddle Mount)
Fits: B, IB, C, CA, G, RC, WC, WD, WD45 gas,
WF, Manual foot switch
Replaces: 70226128
NOTE: Will not fit Autolite starters.
Order #
Price
Starter Drive Housings, parts cont...
ABC505
$66.60
ABC458
$39.50
ABC507
$23.95
IHS132
$44.95
Improved Positive Ratchet Style Drive
(Bendix) fits: Early D10, D12, D14, WC, WD,
WD45, w/ 6-volt system & starter 1107951,
1107017, 1107466, 1107474, 1107962
Replaces: 9004862
NOTE: 10 teeth.
ABC517
$14.45
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
starters (2.955" o/a length, .915" wide,
.140" dia. rivet holes, 2.650" c.c. rivet holes)
USA made NOTE: Anodized aluminum.
Customer must stamp numbers.
ABC511
(Black
6-volt)
$14.45
Lever (For Pull Rod-Type Starter Switch)
Fits: B SN: 113779 & up, IB SN: 1879 & up,
CA, G, WD, WD45, Replaces: 70225587
Manual Starter Switch (Base Mount)
(For 7/8" hole)
Fits: A, IU, K, M, U, UC
Replaces: U879, 23459
(Dash mount for 1-3/4" mounting hole)
NOTE: Will work on 6 or 12 volt.
Starter Drive Housings, parts
ACS1269
$53.85
Starter Rod, Foot / Lever Switch & Levers
$14.50
Instructions & Parts List (1959) WICO XH,
XHD Magneto Service
FXH2100B
ACS277
Starter Solenoid Relay Assemblies, parts
ABC138
Complete Magneto
Fits: B, IB, C, RC, WC, WD, WF, others
Replaces: Fairbanks FM series
MAG6
Points
FXH2024
Order #
WICO magneto, parts - USA made
Order #
Description
$22.45
Starters, parts
Condensor fits: FM-J2B6D, FM-JIA, FM-JIB,
FM-2A, FM-2B, FM-4A, FM-K, FM-X series
all w/ 2 piece cap
FM02
Price
FXH2100B
Lever (For Push Rod-Type Starter Switch)
Fits: B up to SN: 113778, IB up to SN: 1878, C,
RC, (WC SN: 74330 & up), (WF SN: 1904 &
up), Replaces: 70210172
ACS1275
$52.35
Starter Drive Housing
Fits: B, IB, C, CA, Early D10, D12 w/ starter
1107471, D14 gas w/ starter 1107466, RC,
WC, WD, WD45, WF (All w/ starter 1107006,
1107017, 1107024, 1107043, 1107044, 1107045,
1107046, 1107096, 1107951)
Replaces: 1879156
NOTE: No returns if broken.
Starter Commutator (Brush) Band Cover
(For 4-1/2" O.D. Delco Starter Housing)
Fits: B, IB, C, CA, (D10 up to SN: 3501), D12
up to SN: 3001, (D14 6-volt only), D15 diesel,
RC, WC, WD, WD45 gas, WF
Replaces: 7412626
(1-3/16" wide) USA made
NOTE: Stainless steel.
Starter Commutator (Brush) Band Cover
(For 3-3/4" O.D. Delco starter housing)
Fits: G w/ Delco Starter # 1109605, 1109614
Fits: D14 SN: 19001 & up, D15, H3 gas, LP,
(All w/ factory 12-volt starter 1107558 or
1109388), Replaces: 70233294, Delco 1948113
(2.575" to center of mounting bolt locating
hole, 3.775" to 1st edge of starter drive gear
opening) NOTE: Dimensions are from end
of nose cone where it bolts to starter. No
returns if broken.
Fits: D17, 170, 175 (All w/ starter 1107695,
1109384); Combines: E, E3, K; Industrials:
616, 622, 801, 802 (All w/ starter 1107695,
1109384), Replaces: 70231356, Delco 1940960,
1974808 NOTE: 2 bolt. No returns if broken.
ABC514
(Red
12-volt)
Original Spring Style Starter Drive (Bendix)
Fits: B, IB, C, CA, Delco starters 1107043,
1107046, 1107096; Autolite starter MAW4031
Replaces: 1880651, 9004839
NOTE: 14 teeth.
Original Spring Style Starter Drive (Bendix)
Fits: G w/ starter 1109605, 1109614; Early
D10, D12, D14, WC, WD, WD45 w/ 6-volt
system & starter 1107951, 1107017, 1107466,
1107474, 1107962, Replaces: 9004862
NOTE: 10 teeth.
Starter Drive Spring only
(For ABC458)
Starter Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco Remy
starters
$14.45
2" c.c. rivet holes)
USA made NOTE: Stamped w/ raised
letters. Customer must stamp numbers.
Push / Pull Switches
ABC398
$8.20
Universal 2-Position Push / Pull Starter
Switch Fits: Ag & Light Industrial equipment
(10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, two screw
type terminals, non-fused. This can be used
on battery ignition systems only.
Starters, parts continue on next page
29
Order #
Price
Ignition / Key Switches, parts cont...
ACS292
Order #
Price
$19.25
Starter Drive Housings, parts cont...
ABC233
JDS631
ABC489
$12.50
$12.95
$13.95
Starter Push Switch, Extra heavy duty
momentary push button switch
Fits: D15, D17, D19, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, (7000 SN: 4095 & up),
7010, 7020, 7030, (7040 except w/ power
director / shift), 7045, 7050, (7060 except PD
& PS tractors), 7080, 7580, 8010 - 8070, 8550,
(Also used as Ether switch on AC 7000, 7030,
7040, 7050), Replaces: 70253322
(Mounting stem 5/8" - 32 thread, 21/32"
long) NOTE: Depress button: ON; Spring
return: OFF. Two screw type terminal. Up to
35 V (DC), rubber cap for dust and moisture
protection.
Universal 3-Position Fused Push / Pull
Starter & Light Switch fits: Ag & Light
Industrial equipment w/ voltage regulator
NOTE: 15 AMP, five terminals, fused, 7/1620 stem. 10-24 N.C. black plastic knob.
Magneto Push / Pull Ignition Switch
(O.E.M.)
Fits: Allis Chalmers models w/ Magneto
Ignition, Replaces: 70213140
NOTE: One screw type terminal;
Out: ON; In: OFF.
ACS354
$16.95
KEY1094
$2.05
ABC400
$14.85
ACS288
KEY01
30
$12.95
$34.95
$4.50
Ignition / Key Switch w/ 2 Keys
Fits: B, C, CA, D14, WD, WD45
Replaces: 70225310
NOTE: 2 wire switch; May have to drill hole
to .800" on some applications.
Fits: D10 up to SN: 3500, D12 up to SN: 3000,
D14 SN: 9500 & up, D15 up to SN: 9000, D17
up to SN: 75000, D19, D21 (All using Delco
switch), Replaces: 70235785
(.995" dia. threaded end)
NOTE: Five spade terminals. Will fit D10
& D12 w/ newer serial numbers but must
use 70227195 washer so switch will fit dash,
NOT available from STP, Inc.
Ignition Key (For ACS288 Ignition Switch)
Fits: (D10, D12 both to SN:9000), D14
SN: 9500 & up, D15 up to SN: 9000, D17 up to
SN: 75000, D19, D21 (All using Delco switch)
Replaces: 70231713, 72162639
Ignition / Key Switch (O.E.M.)
Fits: Late (D10, D12 Both SN: 9001 & UP) D15
gas, diesel using Indak switch SN: 9001 & up,
D17 SN: 75001 & up, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, Replaces: 70241965
USA made
NOTE: Five spade terminals.
Switch Plate
Fits: 170, 175, 180, 185, 200, 190, 190XT, 210,
220 (All diesel)
Replaces: 70242398
USA made
Ignition Key (For ACS292)
Fits: (D10, D12 SN: 9001 & up), D17 SN:
75001 & up, 160, 170, 175, 180, 185, 190,
190XT, 200, 210, 220, 6040, 6070, 6080, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080,
7580, 8550, Replaces: 70241977 USA made
Order #
Price
ABC1207
$17.95
ABC519
$14.45
ABC511
(6-volt)
$14.45
ABC514
(12-volt)
$14.45
Fits: Ag & Light Industrial equipment
NOTE: Four stud type terminals, 3/4" dia.
thread.
Generator Commutator (Brush) Band Cover,
(For 4-1/2" O.D. Delco Generator Housing)
Fits: B, IB, C, CA, RC, WC, WD, WD45, WF
Replaces: 1872638
(1-5/8" wide) USA made
Voltage regulators cont...
Order #
Price
ABC1148
$28.95
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Delco Remy
generator
2" c.c. rivet holes) USA made
NOTE: Stamped w/ raised letters. Customer
must stamp numbers.
Generator parts
Order #
Price
ABC015
$24.95
ACS1976
ABC103
Price
ABC153
$32.95
6-volt (4 Terminal) Voltage Regulator
(Saddle Mount) Fits: B, IB, C, CA, WC, WD,
WD45 gas, WF using Delco 1101357, 1101413
or 1101414 generators when used w/ ABC188
Voltage Resistor Kit, Replaces: 74514722
NOTE: Provides 2-unit positive ground
generator mounted regulator.
6-volt Generator Cut-Out Assembly
Fits: B, IB, C, CA, RC, WC, WD, WD45,
WF using original 6-volt 1101357, 1101413
generator, Replaces: 1867781, Autolite C4012
on models using 6-volt GGR4801 generator
NOTE: 15 Amp. Mounting tabs are parallel
w/ cut-out.
ABC188
$39.95
ABC152
$32.95
$24.95
Upper Generator Adjusting Bracket
Fits: B, C, CA, IB (SN: 55301 & up)
Replaces: 70210989
ACS1913
Order #
Alternators, parts
NEW not Rebuilt • To convert 6-volt to 12-volt system.
For negative ground systems.
Order #
Price
ABC535
$145.50
MINI 41 AMP Maximum Alternator
w/ Pulley & Diode
Fits: Allis Chalmers models requiring a
smaller dia. alternator for clearance
(4-1/2" housing dia., 2-1/2" pulley dia.,
3/8" belt width) NOTE: For 12-volt negative
ground systems only. This alternator has a
built in 3 wire regulator, that requires an
excitation circuit. Includes instructions.
ABC2315
$34.95
$22.50
$10.50
Lower Generator Bracket
Fits: B, C, CA, (D10 up to SN: 3500), (D12
up to SN: 3000), D14, (W226 Power Unit SN:
96714 & up, Replaces: 70210990
(6.080" o/a length, 1" wide,0.250" thick,
2 holes = 0.375" O.D.,2 holes = 0.340" O.D)
USA made
Generator Belt
Fits: M, Late U, UC
Replaces: U424
(1/2" wide x 24-1/4" long)
ABC185
$32.95
Alternator Pulley (For ABC535)
(0.587" ID, 1.437" o/a length, 3" pulley O.D.,
5/8" belt width) USA made
ABC418
$97.85
ABC1426
$19.95
Voltage Regulator Conversion Kit
Fits: B, IB, C, CA, WC, WD, WD45, WF
NOTE: Used w/ ABC153 Voltage Regulator
when replacing Delco-Remy cut-outs
1116766, 1116807, 1116809 or 1116816 &
updating your generator system.
6-volt (4-Terminal) Voltage Regulator
(Base Mount)
D14 up to SN: 19001 using Delco 1100025
generator, Replaces: 70228365, Delco 1119575
(Base Mount) fits: D10, D12 SN: 3501 & up,
D14 SN: 19001 & up, D15 gas, D17 SN: 42001
& up gas & SN: 38964 & up diesel, D19 SN:
up to 14698, Replaces: 70236680
NOTE: For 12-volt generator system.
(Base Mount)
Fits: D21, 170, 175, 180, 190, 190XT gas, diesel;
210, 220 diesels; 160, 185, 200 (All w/ factory
alternators), Replaces: 72072955
Generator Tag w/ 2 Rivets
Fits: Tractors & Industrial using Autolite
generator
(2.300" o/a length, .732" wide, .145" dia. rivet
hole, 2" c.c. rivet holes) USA made
NOTE: Anodized aluminum. Customer
must stamp numbers.
Voltage regulators
Ignition / Key Switches, parts
ABC065
Generator parts cont...
63 AMP Alternator w/ Pulley
(6-1/4" housing dia., 2-1/2" pulley dia.,
5/8" belt width) NOTE: For 12-volt negative
ground systems only. Must rev engine
to 800 - 850 RPM in order to self excite.
Simple 1-wire alternator Hook Up: Run a
wire from alternator through amp gauge to
positive side of battery!
Pulley only (For ABC418)
(.670" shaft dia., 3-3/16" pulley O.D.,
1/2" belt width)
ABC495
$19.95
Pulley only (For ABC418)
(.670" shaft dia., 2-1/2" pulley O.D.,
5/8" belt width)
Alternators, parts continue on next page
31
Light switches, parts cont...
Order #
ACS290
Price
$28.50
2-Position Light Switch (O.E.M.)
Fits: D10, D12, D14, D15, D17, D19, D21, 190,
190XT, Replaces: 70234409
NOTE: Two spade terminals.
Alternators, parts cont...
Order #
Price
ACS2347
$49.95
Alternator Bracket Kit
Fits: B, (Serviceable for C, & CA Must trim 1"
off lower end of adjustment bracket & redrill
hole to clear draglink), IB, (lower bracket
only fits D10, D12, D14) USA made
NOTE: Use w/ ABC418 alternator &
w/ existing belt.
ACS2352
ABC404
ABC529
$59.10
$34.95
$23.50
ACS1096
Light Switch w/ Knob (O.E.M.)
Fits: 160, 170, 175, 180, 185, 190, (190XT
SN: 19001 & up), 200, 210, 220, 6040
Replaces: 70249142
USA made
ACS1098
$15.95
Universal Mounting Kit
NOTE: Does not include the top adjusting
bracket. Used when switching from a
generator to an alternator. May have to be
drilled or modified for your application.
ABC398
$8.20
JDS631
$12.95
Light switches, parts
Order #
IHS950
ACS139
ABC425
ABC367
32
Price
$14.50
$39.95
$4.95
$4.95
Field Resistor on Light Switch
Fits the following using the original switch
(208197) and cut-out system: B, IB, C, CA,
G, RC, WC, WF, WD, WD45 gas up to SN:
201241
3-Position Light Switch, (Hi-Lo-Charge)
(Hi charge w/ lights)
Fits: B, C, CA, G, RC, WC, WD, WD45, WF
(All w/ cut-out on generator)
Replaces: 70208197
(10-32 thread) NOTE: Three screw type
terminals, .800" dia. threaded stem.
Price
ACS152
(6-volt)
$49.50
ACS205
(12-volt)
$49.50
ACS150
Universal 3-Position Fused Push / Pull
Starter & Light Switch
Fits: Allis Chalmers models w/ voltage
regulator
NOTE: 15 AMP, five terminals, fused,
7/16-20 stem. 10-24 N.C. black plastic knob.
Order #
Price
FDS193
$49.95
JDS581
$44.95
JDS582
$44.95
(Lo Beam)
(Hi Beam)
Order #
JDS676
Price
$18.15
Clam Ring w/ Screw
Fits: Late 190XT, Late D15, D21, 160, 170, 175,
180, 185, 190, 200, 210, 220, 6040, 7030, 7050
Replaces: 70230233
(4-1/2" )
Dash light, parts
Fits: D10, D12, D14, D15, D17, D19, D21,170,
175, 180, 185, 190, 190XT, 200, 210, 220, I-40,
I-400, I-60, I-600
ACS273 Replaces: 229203, 230247, 234404
(.658" dia., 1" c.c. mounting holes)
JDS589CH Replaces: 234357
(1-1/4" dia)
Description
12-volt Complete Sealed Beam Headlight
Assembly
Serviceable for D15 up to SN: 9001, D17 up to
SN: 42001, H3, HD3, Replaces: 70229915
(5-3/4")
NOTE: Mounts to side of grille & not to
fender. Serviceable = not exact of original.
Price
12-volt Bulb............................................................... ABC345.............. $1.80
Chrome Dash Light Cover only............................ JDS589CH......... $15.45
Tail lights, parts
Need light components? See pgs. 341 - 343
Order #
Sealed-Beam Headlight Assembly
(For Flat Top Fenders)
Fits: 170, 175, 180, 185, 190, 190XT, 200, 210,
220
JDS581 Replaces: 70249146
JDS582 Replaces: 70249147
(4-1/2")
Order # 12-volt Chrome Dash Light Assy.......................... ACS273............... $29.95
Price
ACS264V6
(6-volt)
$45.60
ACS264V12
(12-volt)
$45.60
ABC1979
$1.45
Bullet Style Tail Light Assembly
Fits: G, B, C, CA, (D10, D12 both up to SN:
9001), (D14 up to SN: 19000), WD, WD45
Replaces: 225038, 228377
$84.95
IHS647
$34.95
6-volt Complete Headlight Assembly
Fits: G
Replaces: 70800128
ACS333
Fits: RC, WC, WF, WD, WD45
Replaces: 70236969
ACS165
$49.90
Light Switch Plate
Fits: 160, 170, 175, 180, 185, 190, 190XT, 200,
210, 220, 6040
Replaces: 70249141
USA made
Universal 2-Position Push / Pull Light Switch
Fits: Ag & Light Industrial equipment
(10-24 knob thread)
NOTE: 30 AMP, 3/8" dia. thread, Two screw
type terminals, non-fused.
Fits: B, IB, C, CA, (Late U, UC, UI using
4-3/4" dia. lights)
Replaces: 70210921, 70210922
(1/2" dia. stud)
Headlights, parts
Knob only (Says "LIGHTS")
(For ACS139 Switch)
(10-32 thread)
Knob only (Plain Face)
(For ACS139 Switch)
(10-32 thread)
Order #
$29.50
NEW! Alternator Bracket Kit
Fits: WC, WD, WD45, WF gas, LP
USA made
NOTE: Use w/ ABC418 alternator.
Universal Top Adjusting Bracket
(7/8" wide, 1-1/2" offset, 8-1/4" from
farthest end of slot to center of mounting
hole, 3-3/4" slot length, 3/8" mounting hole)
NOTE: Customer may need to trim to fit
some models.
$27.50
MFS108
Headlight Bracket
Fits: G
Replaces: 70800117
$18.95
12-volt Sealed Beam Headlight Assembly
(For Flat Top Fenders)
Fits: 190XT, 170, 175, 180, 185, 190, 200, but
not like original; 6040, 6060, 6080, 7000, 7010,
7020, 7030, 7040, 7045, 7050, 7060, 7080
Replaces: 70267185
(4-1/2")
NOTE: Post is out of back w/ wires thru
post.
NEW! Base Gasket (For Bullet Tail Light)
Fits: Same as ACS264V6, ACS264V12
ACS099
Light Visor
Fits: D10, D12, D15 (All SN: 9001 & up);
D17 SN: 42001 & up, D19
Replaces: 70236352
$32.50
12-volt chrome Tail Light (Bullet-Style)
Fits: Same as ACS264V6, ACS264V12
Replaces: 225038, 228377
NOTE: Good functional light but does
not have restoration appearance.
Close out.
Tail lights, parts continue on next page
33
Tail lights, parts cont...
Order #
ABC548
Price
$10.15
Tail lights, parts cont...
Order #
Price
JDS603
(6-volt)
$49.95
JDS606
(12-volt)
$49.95
ACS355
ABC544
$96.95
ABC1439
Tail Light Assembly
w/ Copper Ground Strap
Fits: RC, WC SN: 74330 & up, WF SN: 1904
(4-3/4" Curved lens; 1-1/2" stud length)
NOTE: Powder coat black. Curved lens.
12-volt Sealed Beam Combo Tail Light
Fits: D10, D12, D15 SN: 9001 & up, D17 SN:
42001 & up, D19, D21, 190 up to SN: 19000
& 190XT up to SN: 19000
Replaces: 70240895
(4-3/4")
ABC1439
12-volt Round Tail Light Assembly
w/ License Lamp Window
(4" dia.; 2 stud mount, 1-7/8" c.c. studs)
NOTE: Red lens, black ABS base.
$20.35
Rear view
ACS220
ACS245
Order #
Price
ACS135
$29.95
Orange Front Grille Emblem
D14 up to SN: 19000, D17 up to SN: 24000;
Combines: A2, C, E, E3, F, K
Lawn & Garden: 116, 122, 616, 622
Replaces: 70228474
NOTE: Die cast, chromed, painted. Orange
used through mid 1959.
$3.45
$18.95
$17.15
12-volt Fender & Cab Warning Light
Serviceable for D21 thru 7080
(All using round warning light)
Replaces: 70248110
(4" dia.)
NOTE: 2 amber lenses, double contact
bulb & black die cast base
6-volt Bulb only
(For ABC548)
IHS899
12-volt Sealed Beam Combination Rear
Light Bulb w/ transparent red background
using separate bulb
w/ combination Tail light & w/ 12-volt
bulb (4409), Replaces: 70250301
(4-1/2")
Tail Light Lens w/ Guide Name
Fits: D14 SN: 19001 & up, D15, D17
Lawn & Garden: 116, 122, 616, 622, 801, 802
Replaces: 70229795
(2-9/16" O.D.)
USA made
NOTE: Red plastic.
ACS138
ACS218
ACS247
$29.95
$42.85
$73.50
$2.95
Gasket only (For ACS220)
Replaces: 70229796
USA made
ACS248
$73.50
$3.45
6-volt Bulb only
(For ABC544)
ABC546
$24.35
12-volt Fender & Cab Warning Light
Serviceable for Allis Chalmers models
(All using rectangular warning light)
NOTE: 1 amber lens, 1 red lens, amber
side marker, single contact bulb & black
ABS base.
ABC1243
$4.95
Amber Lens only
(For ABC546)
34
Allis Chalmers: Chassis parts
Emblems
ACS1567
$0.95
FROM OUR CUSTOMERS!
Thank you for your help with my order.
I am not used to the efficiency you showed in helping
with my request over the phone. Your assistance is
greatly appreciated and the quality of your customer
service is way above standard. Have a great afternoon.
- Nick
JDS630
$0.40
Creme Front Grille Emblem
Fits: D10 SN: 1951 & up, D12 SN: 1951 & up,
D14 SN: 19001 & up, D15, (D17 SN: 24001 &
up), D19, D21, ED40; Combines: A2, C, E, E3,
F, K, Lawn & Garden: 616, 622
Replaces: 70233852
NOTE: Die cast, chromed, painted. Creme
used from mid 1959 to approx. 1965 then
used ACS218.
Front Grille Emblem w/ Decal
Fits: Late D10, D12, D15, D17, D21, ED40,
EIII Gleaner Combine (Appx. 1965 & up)
Replaces: 70246724
USA made
NOTE: Die cast, chromed.
Side Nameplate (Emblem)
Fits Ag: D10, D12, D15, D17 (1961-63)
Replaces: 70233854
(3" wide x 29" length)
NOTE: Creme background w/ black
lettering. 2 required per tractor; Sold
individually. Rivets & clips not included.
Side Nameplate (Emblem)
Fits Industrial: D10, D12, D15, D17, I-40,
I-400, I-60, I-600, 616, 622, 801, 802 (1961-63)
Replaces: 70242700
(3" wide x 29" length)
NOTE: Black background w/ polished
aluminum lettering. 2 required per tractor;
Sold individually. Rivets & clips not
included.
Rivet only (For ACS247, ACS248 Side
Nameplates) fits: D10, D12, D15, D17, I40,
I60, I400, I600, 616, 622, 801, 802
Replaces: 70234173
NOTE: 7 required per nameplate;
Sold individually.
Push Clip only
(For ACS247, ACS248 Side Nameplates)
NOTE: 7 required per nameplate;
Sold individually.
Hand cranks, parts
Order #
Price
ACS133
$42.95
ACS133B
$21.75
ACS350
$42.90
ACS1698
$58.50
ACS096
$12.50
Hand Crank w/ Spinner
Fits: G
Replaces: 70800646
USA made
Hand Crank Bracket
Fits: G
Replaces: 70800068
USA made
Fits: B, C, CA
Replaces: 70207893
USA made
Fits: WC, WD, WD45, WF, RC
Replaces: 70216933
USA made
Hand Crank Holder / Brackets
Fits: RC, WC, WD, WD45, WF
Replaces: 70208443 (front clip), 70220855
(rear clip)
Crank hole casting
Fits: G
Replaces: 70800086
Description
Order # Price
Crank Hole Casting................................................. ACS058............... $22.95
Grille mounting tabs
Fits: WC, WD, WD45
USA made
Description
Order # Price
LH Grille Mounting Tab......................................... ACS1117.............$26.45
RH Grille Mounting Tab........................................ ACS1121.............$26.45
NOTE: Bare metal. Must weld to existing grille. Sold individually.
35
Side panels - USA made
Order #
ACS147
Price
$79.95
Replacement grille screens - USA made
Order #
Price
Application
ACS203 $19.95
Fits: B, IB, C, CA
(16" x 17")
NOTE: 1 used per tractor.
ACS145
(LH)
$45.95
ACS146
(RH)
$45.95
2-piece Side Panel Set
LH Fits: D10, D12 (both up to SN: 9001),
RH Fits: D10 SN: 3501- 9000, D12 SN: 3001
- 9000
Replaces: 70231587 (LH), 70236019 (RH)
Order #
Price
Side Panel
ACS145 (LH) Fits: D10, D12 (both up to SN:
9001), Replaces: 70231587
ACS146 (RH) Fits: D10 SN: 3501- 9000, D12
SN: 3001 - 9000, Replaces: 70236019
Hoods - USA made
18 gauge, primed, heavier than originals!
ACS1511
(RH)
$39.40
ACS062
$19.95
ACS065
$19.95
ACS061
$19.95
ACS226
$29.95
ACS1511 (RH) Fits: D10 up to SN: 3500,
D12 up to SN: 3000, Replaces: 70231586
Fit to tractor before painting.
Order #
ACS142
ACS153S
ACS153L
ACS177
Price
$175.95
$324.00
$324.00
Hood
Fits: G
Replaces: 70800089
NOTE: Heavier than original 20 gauge
factory hood.
Hood (4 Hole)
w/ Small (2-1/2") Exhaust Hole
Fits: B, C
Replaces: 70225260
NOTE: Works w/ ACS101 muffler.
Hood (4 Hole)
w/ Large (4") Exhaust Hole
Fits: B, C, CA gas
Replaces: 70225260
NOTE: Works w/ ACS103 muffler.
ACS1515
(LH w/out
choke slot
ACS1517
(RH)
$485.95
Hood
Fits: WD45 diesel
Replaces: 70226960
IHS283
$39.95
ABC422
$12.95
$43.95
Side Panel
ACS1513 (LH) Fits: D14 up to SN: 19000,
D15 series I up to SN: 9000, I60, I600 gas,
diesel, Replaces: 70233497
$43.95
$43.95
Side Panel
ACS1515 (LH) Fits: D14 SN: 19001 & up,
D15 series II SN: 9001 & up
Replaces: 70232326
ACS047
IHS181
ACS1519
(LH)
ACS1521
(RH, 2-pc)
$18.50
$54.65
ACS1521 (RH) Fits: D17 gas, LP up to SN:
42000 (Will fit diesel if trimmed)
Replaces: 70237188
Air cleaner parts cont...
Order #
Price
FDS034
$14.95
FDS081
$10.30
Air Cleaner Cap
Fits: Late CA, D10, D12, D14
Replaces: 70242072
(1-5/8" base I.D.)
Air Cleaner Cap
Fits: D15, WC, WD, WD45, WF
Replaces: 70208222
(1-3/4" base I.D.)
Air Cleaner Cap
Fits: D17 gas up to SN: 42000, D17 diesel
up to SN: 38963, WD45 diesel
Replaces: 70226926
(2.275" base I.D.)
Air Cleaner Oil Cup (Clamp-Style)
Replaces: 70225818
(4" I.D.; 4-7/16" O.D.)
NOTE: Used on engine SN: CE13732 & up.
Pipes, parts
ACS117
$54.25
NEW! Air Cleaner Pipe
Fits: G
Replaces: 800147
NOTE: If hoses are needed order (2) ACS208
hose. Available Summer 2014.
ACS340
$18.50
ACS194
$51.35
ACS284
$14.00
Air Cleaner Oil Cup Clamp
(For ACS047)
Replaces: 70225817
ACS115
Air Cleaner Pipe Bracket
Fits: G
Replaces: 70800142
USA made
Air Cleaner Pipe
Fits: Unstyled WC up to SN: 74329,
Unstyled WF, Replaces: 70202560
(2" O.D.)
USA made
NOTE: Exact of original.
Air Cleaner Pipe Grommet
Fits: 210, 220, 7000, 7010, 7020, 7030, 7040,
7045, 7050, 7060
Replaces: 70267859
(4" I.D., 5-1/16" O.D.)
Hose, Clamps
ACS208
$25.00
Air Cleaner Oil Cup (Clamp-Held)
Serviceable for Early D10 up to SN: 3501,
Early D12 up to SN: 3001, D14
Replaces: 70228478
(4-3/4" O.D. at lip, 4-15/32" I.D., 3" high)
NOTE: Looks slightly different, but works
great.
Clamp
(For FDS034 Cup)
Replaces: 70225858
Air Cleaner Cap
Fits: D17 gas SN: 42001 & up, D19 gas
Replaces: 70235918
(2-1/4" I.D., 2-3/8" O.D.)
USA made
Air Cleaner Oil Bath Filter Element
(3" wide x 78" long)
NOTE: Replaces the mesh in existing air
cleaners. Sold by the bag (usually 2 required
for B - D14; 3 required for WC - WD).
Oil Cups, parts cont...
$9.95
$46.65
Side Panel
ACS1519 (LH) Fits: D17; Industrials: 616,
622, 801, 802 gas, LP, Replaces: 70232149
Air Cleaner Cap
Fits: B, IB, C, Early CA, (G - thru hood), RC
Replaces: 70208299
(1-1/4" base I.D.)
Oil Cups, parts
ACS1517 (RH) Fits: D14, D15, I60, I600 gas,
diesel, Replaces: 70232327
$409.95
Hood
Fits: WD, WD45 gas, Styled WC SN: 74330
& up, Styled WF SN: 1904 & up
Replaces: 70220616
ACS179
ACS1513
(LH w/
choke slot)
Caps, parts
ACS204 $17.50
Fits: RC, WC SN: 74330 & up, WD, WD45, (WF
SN: 1904 & up)
(9-1/4" x 19-1/4")
Air cleaner parts
Air Cleaner Oil Cup
Fits: G
Replaces: 70800760
$2.55
Air Cleaner Hose
Fits: G
Replaces: 70800141
(1-1/8" I.D., 1-5/8" O.D., 2-1/4" long)
Air cleaner parts continue on next page
36
37
Pre-cleaner assys., parts cont...
Order #
JDS741
Price
$99.95
Air cleaner parts cont...
Order #
Price
ACS1722
$10.95
Hose, Clamps cont...
ACS1719
ABC492
FDS258
$18.95
$2.70
$3.60
Air Cleaner to Carb Hose
Fits: WC SN: 74330 & up, WD, (WF SN: 1904
& up), Replaces: 70208114
(1-1/2" I.D both ends)
USA made
Air Cleaner to Carb Hose
Fits: WD45 gas, W226 Power Unit (both SN:
96714 & up), Replaces: 70226266
(1-7/8" I.D. both ends, 8-7/16" outside curved
length)
Clamp
(For 1-5/8" O.D. ACS208 Air Cleaner Hose)
Fits: G
Replaces: 911290
Air Cleaner Hose Clamp
(For 1-3/4" to 2" O.D. Hose)
Fits: B, C, CA, D10, D12, RC, WC, WD, WF
Replaces: 921912, 921913
ABC470
ABC510
$39.95
Price
ABC1824
$49.95
ABC383
ABC512
$74.95
Pre-Cleaner Cap Assembly
Fits: D17 Gas and other models
w/ 2-1/4" I.D. base & 7" bowl
Replaces: 70257382, 70234832
USA made
$74.95
w/ 2-1/2" I.D. base & 7" bowl
USA made
38
Fits: Combines; K2 diesel, F2, (G, L, M gas)
w/ 3" I.D. base & 7" bowl
Replaces: 1306480
(3" I.D. base)
Fits: D21, (190, 190XT diesel),
200, 210, 220, 7000 thru 7050 w/ 4" I.D. base
& 10-1/2" bowl, Replaces: 70249775
ABC554
ABC484
$39.95
JDS557
Price
Pre-Cleaner Cover w/ Brass Knurled Nut
Fits: D15 diesel up to SN: 9001, HD3, I-60,
I600 diesel (All w/ 5-1/2" bowl)
Replaces: 70233662, 1127421
(5-7/16" I.D.) USA made
NOTE: Aluminum.
Pre-Cleaner Bowl
Fits: D15 diesel up to SN: 9001, HD3, I-60,
I-600 diesel (All w/ 5-1/2" dia.)
Replaces: 70233663
NOTE: Clear plastic.
Pre-Cleaner Base (For ABC338 Bowl
& JDS559 Top)
Fits: Combines; K2 diesel, F2, (G, L & M gas),
NOTE: Metal. Check size before ordering.
JDS561
ABC338
$24.95
Pre-Cleaner Cover w/ Brass Nut
(For 7" bowl)
Fits: D17 Gas to SN: 42001, Dsl. to SN: 38964
& A thru F2 combines, Replaces: 71125803
(Bowl O.D. at top = 7)
NOTE: Green metal.
Fuel tank, parts cont...
Order #
Price
ABC2672
$124.95
NEW! Fuel Tank Filler Neck Straightening
Tool w/ Instructions fits: A, (D17 Early using
buy clean fuel cap), M, U, UC, (Unstyled
WC, WF up to SN: 2045) USA made
Used to straighten bent filler necks & filler
neck tabs to make the cap seal properly
(not for use with tanks using baffled filler
necks). This part is a duplicate of the
factory service tool that works in many
applications using the ABC1880, IHS226,
IHS416 & JDS416 caps.
ABC494
$3.95
Fuel Tank Webbing
Fits: Tractors using webbed insulation
between fuel tank mounts & other sheet
metal parts (3' L x 1" wide x .042" thick)
USA made NOTE: Economy black woven
nylon. Can be glued or riveted.
ABC1823
$4.95
Fuel Tank Webbing
Fits: Tractors using 1" wide webbing for fuel
tanks & other sheet metal parts
(3' L x 1" wide x .050" thick)
NOTE: Black canvas, mildew resistant.
Sold in 3-foot length.
ABC1656
$5.25
Fuel Tank Webbing
Fits: Tractors using 1-1/2" wide webbing for
fuel tanks & other sheet metal parts
(3' L x 1-1/2" wide x .050" thick)
ABC1827
$5.50
Fuel Tank Webbing
Fits: Tractors using 2" wide webbing for fuel
tanks & other sheet metal parts
(3' L x 2" wide x .050" thick)
$75.00
Pre-Screener (Metal) w/out Screen
Fits: All Donaldson Pre-Cleaners
w/ 3" O.D. pipe
NOTE: Powder coat green.
JDS535
JDS938
$39.95
Screen w/ Clip & 2 Springs
(For Pre-Screener)
Fits: JDS561 Pre-Screener and Gleaner
combines F, G, L gas w/ 7" dia. pre-cleaner
bowl, Replaces: 71141353
(5-1/4" tall x 19-3/8)
$4.95
Pre-Screener Clip & Springs Kit
(For JDS535 Screen)
ABC339
$16.95
ABC484 specifications: Bowl O.D. at top = 5-1/2", Bowl O.D. at bottom
= 5", Cone I.D. at top= 2-7/16", Bowl side height= 2-7/16", Overall
height =3-9/16"
JDS559
$68.95
$24.95
Fits: D15 diesel up to SN: 9000; Serviceable
for ED40 & others using 2" I.D. base & 5-1/2"
bowl, Replaces: 74016565
(2" I.D. plastic base, 5-1/2" pre-cleaner O.D.)
USA made
Pre-Cleaner Cap Assembly w/ Brass Nut
Fits: Combines; K2 diesel, F2, (G, L, M gas)
Replaces: 1306480
(3" I.D. base)
NOTE: Powder-coated green.
Order #
$64.60
Pre-cleaner assys., parts
Order #
Pre-cleaner assys., parts cont...
Pre-Cleaner Bowl (10-1/2" dia.)
(For 3" to 4" inlet)
Fits: D21, 170, 175, 180, 185, 190, 190XT, 200,
210, 220, 6060, 6070, 6080, 7000, 7010, 7020,
7030, 7040, 7045, 7050, 7060; Combines: G,
L (D2900), L2 (D2900), 649I; 649T, M, M2
(D2900) (All diesels), Replaces: 70651270, Can
replace Donaldson P01-6330
NOTE: Clear plastic.
ABC339 specifications: Bowl O.D. at top = 10-1/2", Bowl side height =
3", Cone I.D. at top = 5-9/16", Overall height = 4"
Fuel caps w/ gasket, parts
Order #
ACS172
Price
$19.95
Fuel tank, parts
$13.95
Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet
Fits: D17 gas up to SN: 42001, diesel up to
SN: 38964 & A thru F2 Combines
Replaces: 71125804
ABC338 specifications: Bowl O.D. at top = 7", Bowl side height = 3",
Cone I.D. at top = 3-1/2", Overall height = 4-1/8"
Order #
ACS158
Price
$389.95
Underside view
Fuel Tank (Steel)
Fits: G
Replaces: 70800070
USA made
NOTE: Sealed w/ Red Kote® fuel tank liner.
IHS338
$8.95
Underside view
Fuel Cap w/ Gasket
Fits: G, B, IB, C, CA, RC, Styled WC, WD,
WD45, WD45 diesel, Styled WF
Replaces: 70207244
NOTE: For gasket only use MHS043GK.
Auxiliary Tank Fuel Cap w/ Gasket
Fits: B, C, CA, D14, D17, U, WC, WD, WD45,
USA made
Fuel caps w/ gasket, parts continue on next page
39
Sediment bowl assys., parts
Order #
Price
ACS326 $29.95
Order #
IHS226
Price
ABC1880
(Top vented)
$9.95
Underside view
$9.95
Vented Fuel Cap w/ IHS239 Gasket
& Splash Guard
(Says "Buy Clean Fuel - Keep It Clean")
Fits: 'A', 'M', U, UC, Unstyled WC, Unstyled
WF
IHS226 Replaces: 70206622
ABC1880 Replaces: 70206622
(2-11/16" ID, 1.118" height - cap only)
ABC092
Underside view
IHS239
IHS2642
MHS043
$1.95
$1.95
$9.95
Underside view
MHS043GK
ACS336
$1.75
ABC1221
40
$4.95
$27.30
ABC002
Sediment Bowl Assembly
Fits: B, C, CA, D14, (D15 gas up to SN: 9001),
D17 gas up to SN: 42000, D19 gas to SN:
12000, IB, I-40, I-400, I-60, I-600, RC
Replaces: 70237944
(3/8" pipe inlet, 1/8" pipe outlet, 1.280" long
bowl. Includes 5/16" compression adaptor
fitting)
Fits: D10, D12, D14, WC, WD, WD45, WF,
(170 gas SN: up to 7500)
Replaces: 70239167
(Includes shallow bowl w/ 3/8" pipe inlet,
(2) 1/8" pipe outlets)
NOTE: For tractors w/ 1 outlet use ABC092
sediment bowl assy.
$29.95
Gasket only (For IHS226, ABC1880 Caps)
Replaces: 70208065
(2.563" O.D., 1.875" I.D., .125" thick)
NOTE: NBR rubber.
Gasket only
(For IHS226, ABC1880 Caps)
Replaces: 70208065
(2.563" O.D., 1.875" I.D., 0.125" thick)
USA made
NOTE: Rubberized cork.
ABC123
Fuel Cap (Vented) w/ MHS043GK Gasket
Fits: D10, D12, D14, D15, D17, D19, I-40,
I-400, I-60, I-600, 170, 175, 180, 185,
Replaces: 70253690; Serviceable for B, C, CA,
G, IB, RC, Styled WC, WD, WD45, WD45
diesel, WF
(2-7/8" O.D.)
ABC039
ABC563
ABC229
ABC534
The following parts (sold separately) will fit ACS326, ABC092,
ABC002 Sediment Bowl Assys:
Order #
Gasket only
(For MHS043)
(2.622" O.D., 1.500" I.D., 0.100" thick)
NOTE: Rubberized cork gasket.
Fuel Cap w/ Gasket
Fits: D21, 190, 190XT, 200, 210, 220, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080,
7580, 8550, Replaces: 70262788
(3.475" O.D.)
Gasket only (For ACS336 cap)
Replaces: 70271531
(2.242" I.D., 2.948" O.D.)
USA made
NOTE: Rubberized cork.
Price
ABC281
$34.45
ABC124
Sediment Bowl Assembly w/ 2.315" long
Bowl & 1/4" x 5/16" Adapter
Fits: D15 gas SN: 9001 & up, D15 diesel, D17
gas SN: 42001 & up, D17 diesel, D19 gas SN:
12001 & up, D19 diesel, D21, U, UC, WD45
diesel, 170 diesel, 175 diesel 180 diesel, 185
diesel, 190, 190XT, Replaces: 70237946
(3/8" pipe inlet, (1) 1/8" pipe outlet)
JDS642
ABC236
ABC229
ABC534
Fuel filters, parts cont...
Order #
Price
ABC1423
$29.95
ABC1421
$5.25
EA
Price
Description
ABC123
$2.90
Glass Bowl, Replaces: 70237945
(2" O.D., 1.280" L)
ABC039
$0.98
Gasket, Replaces: 70208362
(2" O.D.) USA made
ABC563
$4.95
Bail Assembly w/ Nut
Replaces: 70223247
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
Screen (3/8" dia. center hole)
FROM OUR CUSTOMERS!
I received my steering wheel Saturday and
I'm very pleased with it.
Thanks for your quick shipping and delivery. Hope to
do business with you again. - Ken M.
Diesel Single Fuel Filter Assembly
w/ Glass Bowl
Fits: 160, 170, 175, 5040, 5045, 5050
Replaces: 72089560
(4 1/2" x 20 UNF ports)
NOTE: Use caution when threading fuel
line in, as it is not returnable if threads
have been cross threaded.
Fuel Filter Element w/ Seals
(For Cav/Simms fuel filters)
Fits: 160, 170, 175, 5040, 5045, 5050, 6040 &
6140, Replaces: 70251397, Cav # 7111/296
(3-1/2" O.D. x 3/4" I.D. x 2.85" tall)
ABC281 components
The following parts (Sold separately) will fit ABC281 Sediment
Bowl Assy:
Order #
Price
ABC124
$4.95
Glass Bowl, Replaces: 70237947
(2.315" L, 2-1/8" O.D.)
JDS642
$0.95
Gasket, Replaces: 70208137 USA made
ABC236
$7.20
Bail Assembly w/ Brass Nut
Replaces: 70223248
(2-1/8" O.D., 2.370" L)
ABC229
(Brass)
$3.50
ABC534
(Plastic)
$3.75
Description
Steel fuel lines
Order #
Price
ACS2066
$24.95
Screen (3/8" dia. center hole)
Application
Fits: G
Replaces: 70800066
(1/4" O.D., 11" o/a length, 1/8" NPT inverted
flare fittings)
ACS326, ABC092, ABC002 components
$18.95
Underside view
Order #
Fits: G, (170 SN: 7500 & up), 175, 180
(All gas), Replaces: 70253122, 70800069
(Side inlet & outlet, 1/8" x 1/8" female pipe
thread)
Fuel caps w/ gasket, parts cont...
Sediment bowl assys., parts cont...
Fuel filters, parts
Order #
ABC490
Price
In Line Fuel Filter w/ Hose & Clamps
Fits: Allis Chalmers models using
3/8" fuel line
NOTE: Must splice fuel line to use. Will
help to keep rust & dirt out of carburetor.
ABC1315
ACS1974
$29.95
ACS1863
$32.95
$6.45
$8.50
Fuel Tank Screen
Fits: Most Allis Chalmers models
w/ stem style sediment bowl Will fit
ABC092, ABC281, IHS713, IHS1577
sediment bowl assemblies
(.375" screen O.D., .216" pipe O.D., 2.530"
o/a length) USA made NOTE: Slides on
top of sediment bowl inlet to prevent dirt
from the fuel tank bottom from entering
the sediment bowl assembly. To fit
ABC281, IHS713, IHS1577 customer must
drill sediment bowl stem out.
Fits: B, C, CA, IB, D10, D12
Replaces: 70207278, 70215478, 70243108
(13-1/8" o/a length, 1/4" tube O.D.,
1/4" compression fittings)
NOTE: May have to trim to fit.
Fits: WD
Replaces: 70220636
(23" o/a length, 1/4" tube O.D.,
1/4" 45° inverted flare nuts)
ACS1866
$32.95
Fits: WD45 gas
Replaces: 70226281
(24" o/a length, 1/4" tube O.D.,
1/4" 45° inverted flare nuts)
41
Clutch, transmission parts
Order #
ACS346
Price
$349.95
Clutch Kit
Fits the following w/ 8-1/2" diameter clutch:
B, IB, C, CA, Replaces: 70226262 (pressure
plate), 70226729 (clutch), 70227704 (throwout
bearing), 70206968 (pilot bearing)
(8-1/2", 1-1/8" dia. spline, 10 splines)
NOTE: Includes new 8 1/2" woven clutch
disc, pressure plate, throwout bearing,
and pilot bearing.Measure clutch prior to
ordering. Please note this does not include
a pilot bushing. Some tractors require a
bushing instead of a bearing. The bushing
is not available through STP, Inc.
Throttle parts
Order #
Price
ACS1251
$19.50
ACS181
ACS334
ACS182
ACS1248
$18.75
$12.50
$7.95
$19.50
ACS191
$91.00
ACS225
$19.95
ACS184
ACS185
ACS267
42
$6.95
$13.50
$13.95
Throttle Lever
Fits: G
Replaces: 70800149
(6-3/4" long, 3/4" wide, .104" thick)
USA made
Throttle Rod
(45-1/4" o/a length) USA made
NOTE: Powder coat AC orange.
ACS2470
$158.50
Throttle Rod Bracket
Fits: G
Replaces: 70800302
USA made
Throttle Rod Bracket Spring
(2-1/2" o/a length; 11/16" O.D.)
USA made
Throttle Lever
Fits: B SN: 101 & up, IB SN: 1001 & up,
C, CA, Replaces: 70211268
(6-7/8" long, 3/4" wide, .104" thick)
USA made
Throttle Quadrant w/ Bushing
Fits: WD, WD45
Replaces: 70227004 (quadrant), 70222447
(bushing)
Bushing only
Fits: WD, WD45, Replaces: 70222447
(.900" I.D., 1.009" O.D., .057" thick,
.987" length)
Throttle Quadrant & Hydraulic Lever Knob
Fits: CA & G on Hydraulic Lever; WD,
WD45, (D10, D12, D14, D15, D17, 180, 185,
190, 190XT, 200, 210 & 220 for numerous
applications), Replaces: 70220901
(.466" hole I.D., 1.213" o/a length)
Throttle Quadrant & Hydraulic Lever Slide /
Block
Fits: WD, WD45
Replaces: 70222454
Throttle Return Spring
Fits: WD, WD45 gas, Replaces: 70220923
(6-7/8" o/a length)
USA made
ABC496
ACS189
ACS270
MHS076
ABC550
$19.95
$14.95
$12.50
$36.95
$85.65
NEW! Clutch Kit
Fits the following w/ 9" diameter standard
(not heavy duty) clutch: 'Some' early B, C,
CA, (D10 up to SN: 3501), (D12 up to SN:
3001), D14, D15, Replaces: 70206968
(9" dia., 1-1/8" - 10 splined hub)
NOTE: Includes new 9" woven clutch disc,
pressure plate, throw out bearing, pilot
bearing & clutch lineup tool. Measure
clutch prior to ordering. Please note this
does not include a pilot bushing. Some
tractors require a bushing instead of a
bearing. The bushing is not available
through STP, Inc.
Clutch Throw-Out Bearing
Fits: B, C, CA (All w/ 9" clutch), D10 up to
SN: 3500, D12 up to SN: 3000, D14 up to
SN: 3000, D15 up to SN: 3000, D17 up to SN:
75000, D19, ED40, H3, HD3, 180, 185, 190,
190XT, 200; Combines: A, A2, C, C2, F, F2, F3,
L up to SN: 4316, M, M2, M3
Replaces: 70235079
Clutch Inspection Cover Plate
w/ Spring Steel Clips
Fits: B, IB, C, CA, D10, D12, D17, D19
Replaces: 70208465
Clutch Pedal Return Spring
Fits: B up to SN: 124037, (IB up to SN: 2836),
C, (CA up to SN: 30611), Replaces: 70225646
(4.300" o/a length, .100" wire dia., .750" body
dia.) USA made
Clutch Disc
Fits: G
Replaces: 70800662
(6-1/2" dia., 15/16"-10 spline)
Pressure Plate (New, not rebuilt)
(6-1/2" dia.)
NOTE: Must recheck clutch adjustment &
clearance after installation.
Clutch, transmission parts cont...
Order #
Price
ACS076
$28.00
ABC1437
Clutch Throw-Out Bearing
Fits: G
Replaces: 70800041
(1.500" center hole)
$7.75
Clutch, transmission parts cont...
Order #
Price
ACS041
$95.00
ACS285
$199.95
ACS048
$24.95
ACS049
$24.95
ACS045
$145.00
Clutch Alignment Tool
Fits: G
(15/16" spline O.D., 10 splines .625" pilot)
ACS1256
$22.95
Flywheel Cover
(8" c.c. bolt holes)
USA made
ABC1928
$38.75
Clutch Throw Out Bearing
Fits: B w/ 8 1/2" clutch , (D10, D12 SN: 3502
& up), RC, WC, WD, WD45
Replaces: 70204829
(2.060" I.D., 3.215" O.D., 0.810" thick)
USA made
ACS1507
ABC2501
$14.95
$19.85
ACS321
$12.50
ABC1937
$34.95
ACS021
ACS282
$95.00
$199.00
Clutch Inspection Cover Plate
w/ Spring Steel Clips
Fits: D14, D15
Replaces: 70227610
NOTE: Primer paint.
NEW! Clutch Throw Out Bearing
Fits: D17 SN: 75001 & up, 170, 175, 210, 220,
7000, Replaces: 70260803
(2.490" I.D., 4.060" O.D., 0.870" wide)
NOTE: Sealed bearing, no need to grease.
Clutch Pedal Return Spring
Fits: D21, Replaces: 70239262
(4.590" o/a length)
USA made
Throw Out Bearing
Fits: 9130, 9140, 9150, 9170, 9190, 9435, 9455
Replaces: 72160065
USA made
Main Shaft Drive Gear
Fits: G
Replaces: 70800377
NOTE: 41 teeth.
Reverse Pinion Shaft Gear
Fits: Late CA SN: 13291 & up; D10 SN: 7760
& up (To fit older must also use ACS285);
D12 SN: 6091 & up (To fit older must also
use ACS285); D14 up to SN: 19001; D15
SN: 17565 & up (To fit older must also use
ACS285), Replaces: 70241367
(1.092" total width) NOTE: 30 teeth.
1st Pinion Shaft Gear
Fits: D10, D12, D14, D15
Replaces: 70228296
NOTE: 50 teeth. Close out
3rd Pinion Shaft Gear
Fits: Late CA SN: 13291 & up; D10 SN: 7760
& up (To fit up to SN: 7759 must also use
ACS282); D12 SN: 6091 & up (To fit up to SN:
6090 must also use ACS282); D14; D15 SN:
17565 & up (To fit up to SN: 17564 must also
use ACS282), Replaces: 70234575
NOTE: 37 teeth.
Transmission Bushing
Fits: CA, D10, D12, D14, D15
Replaces: 70227316
(1-1/8")
Close out
Transmission Bushing
Fits: CA, D10, D12, D14, D15
Replaces: 70227317
(1-3/16")
Close out
Transmission Input Shaft
Fits: 180, 185, 190 SN: 9001 & up, 190XT, 200
Replaces: 70256571
ABC387
$7.20
Transmission Input Shaft / Main Shaft Seal
Fits: 7010, 7020, 7040, 7045, 7060, 8010, 8030,
8050, 8070, Replaces: 70275802
(1.375" I.D., 2.000" O.D., .337" width)
ACS046
$75.00
3rd & 4th Shift Fork
Fits: 180, 185, 190 SN: 9001 & up,
190XT SN: 9001 & up, 200
Replaces: 70261385
ACS302
$24.20
Hydraulic / Transmission Dipstick
Fits: CA, D10, D12, WD, WD45
Replaces: 70224611
43
Knobs cont...
Order #
ACS215
Price
$4.65
Order #
Price
ACS171
$89.95
Order #
Price
ACS202
$5.85
Knob (Rubber)
Replaces: 70228215
Gear shift lever, parts
Control Lever Knob
Fits: D10, D12, D14, D15, D17, D19; Lawn & Garden: 116, 122
Knob (Rubber)
Replaces: 70226023
Curved Gear Shift Lever w/out Pins
Fits: WD45, (Late WD SN: 127007 & up)
Replaces: 70257580
Knobs cont...
Gear shift boots
Order #
Price
ACS263
$14.95
ACS174
$9.95
ACS256
$9.95
Gear Shift Lever Knob Fits: B SN: 120982 & up, IB SN: 26006 &
up, C, CA SN: 8971 & up, D10, D12, D14, D15, D17, D19, D21,
late WD SN: 127007 & up, WD45, WD45D, 170, 175, 180, 185,
190, 190XT, 200 up to SN: 4001, 210, 220
PTO Lever Knob fits: 180 & 185 w/out clutch pack
ACS254
ACS255
ACS253
$13.45
$12.65
$12.65
ACS184
Gear Shift Lever Washer & Snap Ring
Fits: B, C, CA, D10, D12, D14, D15, ED40,
G, WC, WD, WD45, WF
Replaces: 70202875 (snap ring),
70207772 (retainer)
NOTE: Retains gear shift lever into
housing.
Gear Shift Lever Pin (Standard), Pair
Fits: B, C, CA, G, WD, WD45, 190XT, 210,
220, 7000, 7010, 7020, 7030, 7040, 7045, 7050,
7060, 7080, 7580, 8010, 8030, 8050, 8070
Replaces: 70203465
(Standard: .325" wide square end,
.250" round pin dia.)
Gear Shift Lever Pin (Oversize), Pair
Fits: B, C, CA, G, WD, WD45, 190XT, 210,
220, 7000, 7010, 7020, 7030, 7040, 7045, 7050,
7060, 7080, 7580, 8010, 8030, 8050, 8070
Replaces: 70218859
(Oversize: .375" wide square end,
.285" round pin dia.)
NOTE: ACS253 is used to "tighten up"
worn shift lever. Must be ground to fit
existing worn lever.
Knobs
Order #
ABC085
Knob (Rubber)
Replaces: 70220901
(.466" hole I.D., 1.213" o/a length)
Hydraulic Lever Knob Fits: CA, D17, G
Snap Coupler Lever Knob Fits: D10 thru D15, WD, WD45
Seat Base Knob Fits: 180, 185, 190, 190XT, 200, 210, 220
Gear Shift Lever Knob
Fits: A, RC, (U SN: 12001 & up), WC, WD up to SN: 127006, WF
Replaces: 70202862
ABC362
$5.50
Knob (Bakelite)
Replaces: 70242338
(3/8"-24 NF, 1.250" O.D.)
Fits: G
Replaces: 70800354
(2-1/16" bottom I.D., 11/16" hole dia.)
Fits: B, IB, C, CA, D10, D12, D14, D15, ED40,
I-40, I-400, I-60, I-600, RC, WC, WD, WD45,
(1-3/4" bottom I.D.; 9/16" hole dia.)
Fits: D17, D19, D21, 170, 175, 210, 220, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080,
8010, 8030, 8050, 8070, Replaces: 70233767
(2-1/8" bottom I.D., 1/2" hole dia.)
Steering wheels, parts
Steering wheels are just like original
ABC221
$4.50
Knob (Bakelite)
Replaces: 70206456
(3/8"-24 NF)
PTO & Belt Pulley Lever Knob fits: WC, WF, WD, WD45,
WD45D
All new material • Steel spokes
Order #
Price
ACS129
$49.50
JDS282
(15" dia.)
$49.50
Hydraulic Lever Knob fits: D10, D12
Snap Coupler Release Lever Knob fits: D17
PTO & Throttle Knob fits: D21
Brake Lever Knob Fits: B up to SN: 1101
Final Drive Clutch Knob fits: CA
PTO Lever Knob fits: RC, WC, WD, WD45
Transmission Lock Out Lever Knob fits: RC, WC
PTO w/out Clutch, Throttle Lever, Traction Booster Lever,
Hydraulic & PTO levers Knob fits: 190, 190XT, 190XT III (up to
SN: 14186)
Throttle Lever, Traction Booster Lever, Hydraulic & PTO Levers
Knob fits: 200, 210, 220, 200 FWA
Hydraulic Lever Knob fits: 5020, 5020 FWD, 5030
Hydraulic Sensitivity Controls, Quick Hitch Knob fits: 6060,
6070, 6080
$14.85
Hydraulic Lever Knob fits: 6140
Price
$4.50
Cab Door Knob fits: (7000 SN: 8001 & up), 7010, 7020, 7045,
(7060 SN: 6001 & up), (7080 SN: 3001 & up), (7580 SN: 1605 &
up)
ACS2509
Knob (Bakelite)
(3/8" NF)
44
Throttle Lever Knob fits: Some Allis Chalmers models
$6.95
Application
Knob (OEM) (Rubber)
Replaces: 70233770
USA made
Shift Range Lever Knob fits: D10, D12, D19, 170, 190
Hydraulic Lever Knob fits: D10, D12 SN: 3501 & up
PTO & Shift Range Lever Knob fits: I40, I400
Pump Control Knob fits: 170, 175, 185 SN: 12800 & up, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080, 7580, 8010, 8030,
8050, 8070, 4W220, 4W305
FROM OUR CUSTOMERS!
Thanks so much for the quick reply and for
sending my part out so fast.
ACS106
(16" dia.)
$49.50
ACS136
(Black)
$5.25
FDS197
(Chrome)
$6.45
This is my first time using your company, but I WILL be
back, and I will tell ALL my farmer friends to keep you
in mind. - Ed H.
Steering Wheel
Fits: G
Replaces: 70800101
(15" widest dia., 11/16" - 3/4" tapered hub)
Steering Wheel
Fits: B, C, CA
Replaces: 70261861
JDS282: (15" dia., Tapered, keyed & stepped
hub, 11/16" - 3/4" shaft, 3 spokes)
ACS106: (16" dia., Tapered, keyed & stepped
hub, 11/16" - 3/4" shaft, 3 spokes)
Steering Wheel Nut
Fits: B, IB, C, CA, G
Replaces: 913133, 70207562
ACS136: (5/8"-18 NF x .859" tall) USA made
FDS197: (5/8"-18 NF x 1.132" tall)
Steering wheels, parts continue on next page
45
Order #
Price
ACS218
$42.85
Steering wheels, parts cont...
Steering wheels are just like original
All new material • Steel spokes
Order #
Price
ACS108
$49.50
Steering Wheel
Fits: D14 up to SN: 19000, D17 up to SN:
24000, (RC - but has bigger dia.), Styled WC,
WD, WD45, Replaces: 70229677
(18" dia., round hub w/ 3/8" drive hole,
7/8" shaft, 3 spokes)
NOTE: Pin NOT included.
ACS225
$19.95
ACS134
(Black)
$49.50
ACS137
(Creme)
ACS135
(Orange)
ACS138
(Creme)
$52.50
OLS139
$29.95
$29.95
ACS308
ACS243
ABC504
Steering Wheel Cap
Fits: Same as ACS134, ACS137
Replaces: 70233852
NOTE: Die cast chromed, painted. Orange
used through mid 1959. Creme used mid
1959 to approx. 1965 (then use ACS218).
MIS103
Fits: D14, D15, D17, D19, (RC, WC & WF
when using later style joint), WD, WD45
Replaces: 70224890
Steering Wheel Emblem w/ Decal
Fits: D10, D12, D15, D17, D21, ED40, EIII
Gleaner Combine (Appx. 1965 & up)
Replaces: 70246724
USA made
NOTE: Die cast, chromed.
Description
46
$42.85
Fits: 170, 175, 180, 185, 190 SN: 2485 &
up, 190XT, 200, 210, 220, 7030, 7040, 7050;
Industrial: I40, I60, I400, 500, 510, 512, 585,
I600, 610, 612, 614, 615, 621, 715; Combines:
A, E3, F, F2, F3, G, K, K2, L, L2, L3, M, M2,
M3, N5, N6, N7, R40, R60, R70
Replaces: 70256852
(15-3/4" dia., 6-3/4" dish, .853" spline O.D.,
36 spline, 3 COVERED TO CENTER spokes)
NOTE: Deep dish.
$59.95
$24.95
$4.95
$10.75
Steering Wheel
Fits: 6060, 6070, 6080, 7000 SN: 8001 & up,
7010, 7020, 7045, 7060 SN: 6001, 7080 SN:
3001 & up, 7580 SN: 1605 & up, 8010, 8030,
8050, 8070, 8550, 4W220, 4W305
Replaces: 71142487
(15" dia., 4-1/2" dish, 36 splined hub,
13/16"shaft, 0.853" spline O.D., 3 COVERED
TO CENTER spokes)
NOTE: Shallow dish round wheel.
Steering joints repair kits - USA made
Universal steering joints repair kit w/ yokes, pins & grease fitting.
Order #
Price
Steering parts cont...
Order #
Price
ACS345
$28.50
ABC468
$3.95
ABC167 $96.10
Steering Wheel Nut fits: D10 thru D21, WF,
170 thru 220, 6060 thru 8550; Industrial: I40,
I60, I400, 500, 510, 512, 585, I600, 610, 612,
614, 615, 621, 715, Replaces: 70252471
(13/16"-20 NEF)
Steering Wheel Spinner
USA made
NOTE: Aluminum.
Order # Application
Fits: RC, WC, WD, WD45, WD45D
Replaces: 70202152
NOTE: Must redrill pin holes to fit shaft.
ABC167 measurements: 7/8" & 1" dia. shaft, .750" dia. u-joint caps
ABC280 $135.15
Fits: Late WC, WD, WD45, WD45D
Replaces: 70224825
NOTE: Heavy duty; loader use. Must grind
yokes for clearance.
Order #
Price
ACS068
$98.95
Price
Steering Worm Shaft Bearing................................ ABC558.............. $14.95
Steering Shaft
Fits: B, IB, G, Replaces: 70211001, 70255675
NOTE: For Ross steering box only. Single
prong, rides in worm.
ACS341
$74.95
Steering Shaft Tube w/out Bushing
Fits: B w/ Ross steering box
Replaces: 70210472
(40-15/16" length, 1-1/2" O.D.) USA made
ACS343
$74.95
Fits: C w/ Ross steering box
Replaces: 70219390
(40" o/a length, 1-1/2" O.D.) USA made
$64.95
ACS339
$21.40
(50-1/2" length, 1-1/2" O.D.)
USA made
Steering Tube Mounting Brackets (Pair)
Fits: B, IB, C, CA, G
Replaces: 70207218
USA made
Front Spindle Bushing
Fits: B, IB, C, CA, D10, D12
Replaces: 70205601
Power steering parts
Order #
Price
ABC1233
$337.95
Belt Driven Power Steering Pump
(For tractors using Eaton style pump)
Replaces: Eaton P761, 20928, 503-1003, 5031005-005 NOTE: For 5/8-18" male inverted
flare pressure line. Can be adapted to
tractors using Char-Lynn power steering
w/ Eaton pump. Does not include brackets,
reservoir or pulley.
FDS1274
$54.95
ABC1417
$37.45
ABC280 measurements: 7/8" & 1" dia. shaft, .936" dia. u-joint caps
Steering parts
Steering Wheel Cap
Fits: Same as ACS308, OLS139
Replaces: 71142505
(2.528" dia.)
Fits: D14, D15, D17, D19 (All w/ manual
steering), Replaces: 70228150
(1.700" O.D., 1.197" I.D., .506" wide)
Description
Check measurement before ordering.
Steering worm bearing
Steering Wheel Emblem
Fits: (D14 SN: 19001 & up), D15, (D17 SN:
24001 & up) (All w/ power steering)
Replaces: 70232712
USA made
Price
NEW! Steering Shaft Cross & Bearing................. ABC2507............ $14.95
(U-Joint)
NOTE: 1 to 4 used per tractor; Sold individually.
ACS337
ACS216
Order # Allis Chalmers: Chassis parts
$124.95 Steering Wheel
Lower Steering Shaft Support Bushing
Fits: D14, D15, D17, D19, WD, WD45
Replaces: 70222447
Steering Wheel
Fits: D10, D12, (D14 SN: 19001 & up), D15,
(D17 SN: 24001 & up), D19, D21;
Combines: A2, C, E, E3, F, K
(17-1/2" dia., splined hub, 36 splines, 7/8"
shaft, 3 COVERED TO CENTER spokes)
NOTE: Black wheel used through mid
1959. Creme wheel used mid 1959 & up.
Steering shaft cross & bearing
Steering wheels, parts cont...
Power Steering Pump Pulley
Fits: Tractors using ABC1233 or Eaton style
pump (3.750" O.D., .671" bore, .125" keyway,
.500" wide belt groove)
NOTE: Cast iron.
Power Steering Pump Pulley
(For ABC1233)
(5" O.D., 0.675" bore, 1/8" keyway,
0.9715" total width for 1/2" belt)
ABC414
$11.55
ABC1414
$48.75
Steering Shaft Tube Bushing
Fits: B, IB, C, CA, G All w/ Ross steering box
Replaces: 70210475
(1-3/8" O.D., 3/4" I.D.)
Power Steering Pump Belt
Fits: D17 gas SN: 42001 & up
Replaces: 70237386
(1/2" x 41-1/4")
NOTE: Verify belt size before ordering.
Power Steering Pump Port Block
(For tractors using Eaton style pump
w/ separate reservoir) fits: Allis Chalmers
models, Replaces: Eaton 20925, AG33547A
USA made
Power steering parts continue on next page
47
Tie rods
Order #
Price
ACS213
(LH)
$59.95
Power steering parts cont...
Order #
ABC1419
Price
Bolt (For ABC1414)
Replaces: Eaton 14126
NOTE: Yellow zinc; Grade 8.
IHS338
$8.95
Underside view
IHS555
$699.95
Power Steering Reservoir Cap w/ Gasket
Fits: WD45 gas, diesel
Replaces: 70204827
USA made
JDS736
Tie Rod End
Fits: B, C
ACS211 $58.95
(RH)
(13/16" x 18 thread)
ACS066
$67.50
Char-Lynn Power Steering Torque Generator
w/out port block
(7/8" shaft)
ABC380
(Original)
ABC497
(Economy)
$140.30
$18.25
48
$223.35
$3.95
(1.500" base, .735" tall, .550" hole)
ABC369
$2.95
(1.575" base, .600" tall, .650" hole)
ABC371
$3.25
(1.300" base, .965" tall, .500" hole)
FDS337
$3.95
(1.450" base, .600" tall, .550" hole)
Order #
ACS116
Price
Power Steering Priority Flow Control Valve
w/ LIVE hydraulics (1/2" NPT inlet,
3/8" NPT return, 1/2" NPT to remote cyls.)
USA made NOTE: Eliminates belt driven
pump, pulleys & brackets. Enables you to
use your hydraulic pump to operate the
power steering. Is preset at 1500 PSI & 8
gpm. Adjust to your application.
FDS337
Seats, parts cont...
Order #
Price
Metal Seat Back
Fits: B, C
Replaces: 70208664
ACS175
$42.80
$6.75
Tie rod boots
NOTE: Specify size when ordering
(Base I.D. x Height x Hole I.D.)
Order #
Price
FDS336
$3.50
Application / Dimensions
ACS111
$63.60
ABC368
$3.35
ACS071
$32.15
Fits: B, IB, C, CA, D10, D12
Replaces: 71115779
(1.675" base, .900" tall, .625" hole)
ACS320
$3.50
FDS067
$48.50
Fits: D10, D12, D14, D15, D17, D19, WD, WD45,
170, 175, 180, 185, 190, 190XT, 200
Replaces: 70223558
(1.800" base, .765" tall, .740" hole)
$12.50
Fits: D21, 210, 220
Replaces: 70239467
(2.525" base, .950" tall, 1.100" hole)
ABC372
$18.30
Spring Support
Fits: B, C
Replaces: 70208874
USA made NOTE: Spring steel, Powder
coat orange. 2 spring supports used per
tractor; Sold individually.
Hardware Kit
(For ACS116 Metal Seat Back)
NOTE: Includes (4) square nuts, (4) flat
head screws & (4) lock washers. Like
original.
Bottom Seat Cushion
Fits: B, C
Replaces: 70205693
(28" long x 15" wide x 4" tall) USA made
NOTE: Black vinyl; Wood backed.
Seat Back (Back Rest)
Fits: IB, RC, WC, WF, Rumley 6
Replaces: U2743
(10-5/8" x 5-5/8" curved)
USA made
Seat Pan
Fits: RC, WC, Some WD, WD45, WF (All
w/ 1-bolt mount seat), Replaces: 70225050
(19" dia. pan, original seat pan was a 21"
dia.) NOTE: Steel, 9 hole, bolt down, nonflip back.
ACS176
$14.95
Seat Pivot Bolt Bushing
Fits: WD up to SN: 127006
Replaces: 70225041
Sold individually.
ACS328
$24.95
Seat Pivot Bolt Bushing
Fits: CA w/ pan seat, WD SN: 127007 & up,
WD45, WD45D, Replaces: 70225183
(3.368" o/a length, .635" I.D.)
NOTE: 1 used per tractor.
ACS1891
$14.95
Seat Bumper fits the following w/ a
standard pan style seat: D10 SN: 2267 &
up, D12 SN:2242 & up, D14, D15, D17, D19,
D21, (170 thru 190XT w/out deluxe padded
seat), Replaces: 70229703, 910880 (nut),
904204 (washer) (1.043" long, 1.015" dia.)
MIS2679
$28.50
$33.50
Serviceable for G
Replaces: 70800442
(1.200" base, .475" tall, .500" hole)
Char-Lynn Power Steering Slip Fit Coupler
(For IHS555 Generator)
ABC380: (3-3/8" to 3-1/2" adjustable length)
USA made
ABC497: (2-5/8" o/a length)
USA made
ABC371
JDS736
ACS157
ABC370
IHS740
2-Piece Tie Rod fits: (CA w/ adjustable wide
front axle; Must use a 7 degree tapered reamer
to fit steering arms.), D14, D15, D17, D19,
WD, WD45 (if cut to length), 170 up to SN:
170 - 7500, 175 up to SN: 175 - 2035, 180, 185,
190, 190XT, 200, Replaces: 70249418, 70254661,
70254662, Can Replace 70250141, 70250142
(Inside tie rod 16-3/8" long grease fitting to
end, .782" dia. rod, Outer tube 17-3/8" long
grease fitting to end, 1.560" O.D. tube, tie rod
end tapers to .660" to .735")
$69.95
Port Block only
(For IHS555 Generator)
USA made
ABC369
Seats, parts
IHS555: Torque Output at 1000 PSI - 1100 in lbs.; Rated Operating
Pressure - 1000 PSI; Max. Operating Speed at 3 GPM - 65 RPM;
Recommended Fluid Input - 3 to 4 GPM
IHS673
Application / Dimensions
$4.95
Tie rod boots cont...
NEW! Orange Seat Pad
Fits: 19" - 21" Pan (side to side)
(Drawstring, 1-3/4" thick)
USA made
MIS006AC $21.50
Orange & White Tractor Seat Pad
w/ (2) Drain Holes
Fits: 19" - 21" wide pans
MIS006BK
$21.50
Black Tractor Seat Pad w/ (2) Drain Holes
Fits: 19" - 21" wide pans
ACS221
$344.65
Seat Cushion Assembly w/ Steel Frame
Fits: D10, D12, D14, D15, D17, D19, D21;
Will also fit some 170, 175, 180, 185, 190,
190XT, 210, 220 (All using 2-Piece seat w/
out arm rests), Replaces: 70236318
USA made NOTE: Restoration quality.
Cushions are embossed like original!
ACS222
$89.95
Back Rest Cushion only
Fits: D10, D12, D14, D15, D17, D19, D21;
190XT, 210, 220 (All using 2-Piece seat w/
out arm rests), Replaces: 70236460
USA made NOTE: Metal backed.
Seat Repair Kit w/ Rivets
(For FDS067 Seat Pan)
(5-1/2" O.D.; 5/8" center bolt hole)
USA made
Seats, parts continue on next page
49
Monroe® easy ride seat parts cont...
Fits: B, C, CA, RC, U, WC, WF
Order #
IHS347
Seats, parts cont...
Order #
ACS223
ABC445
Price
$120.85
$139.30
Bottom Cushion only
Fits: D10, D12, D14, D15, D17, D19, D21;
190XT, 210, 220 (All using 2-Piece seat
w/out arm rests), Replaces: 70236461
USA made NOTE: Metal backed
Universal Full Suspension Seat
w/ Back Rest & 5-Angle Base
(w/ Slide Track & Mounting Brackets)
NOTE: Can be adapted to fit many tractors
& lawn mowers.
Price
ACS161
$94.95
ACS196
$99.80
ACS219
IHS325
$99.80
$2.05
EACH
ABC526
$9.65
IHS030
$27.95
$19.95
Seat Shock Absorber w/ Spring & Bushing
Fits: (CA - shock only; Must reuse outer
spring); WD up to SN: 127006
Replaces: 70222450 (shock), 70223213 (spring)
Seat Shock Absorber w/ Spring & Bushing
Fits: WD SN: 127007 & up, WD45, WD45
diesel, Replaces: 70226042 (shock), 70226044
(spring)
Seat Shock Absorber w/ Spring & Bushings
Fits: D10, D12, D14, D15, D17, D19, D21, 170,
175, 180, 185, 190, 190XT, 200, 210, 220, 7000,
7010, 7020, 7030, 7040, 7045, 7050, 7060, 7080,
7580, Replaces: 70227916 (shock), 70227917
(spring)
Rubber Seat Bushing only
(For Horizontal bolt hole)
Fits: Allis Chalmers Seat Shock Absorbers
Replaces: 70222488 NOTE: 2 used per
horizontal bolt; Sold individually.
50
Price
$32.50
Rear-Mounted Seat Shock Absorber
w/ Bushings
(Center-to-center compressed = 11-1/2",
Fully extended = 18-1/8)
USA made
Seat Shock Bolt
Serviceable for WD, WD45
(7/16" NC thread, .625" shoulder,
2.380" o/a length) USA made
Price
ACS097L
(LH)
$150.25
ACS097R
(RH)
Application
Toolboxes
$150.25
Fits: WD, WD45
ACS097L Replaces: 70224935
ACS097R Replaces: 70224934
NOTE: Not restoration quality.
Order #
Price
ACS148
$49.95
ACS090
ACS126L
(LH)
Seat Pivot Support Rod
(3-1/2" w/ (2) flat washer, (2) rubber
bushings & (2) #5 bolts)
NOTE: Exact of original.
ACS126R
$49.95
Fits: D10, D12 (both up to SN: 9001), D14,
D15, D17, WD, WD45, Replaces: 70228924
(15" long, 6-3/16" high, 4" wide)
$225.00
$225.00
(RH)
Fits: D17, D19
NOTE: Not restoration quality.
ACS144
$54.95
Fits: D17, D19, 170, 175, 180, 185, 190, 190XT,
200, 210, 220, Replaces: 70249750
(21-3/8" long, 6-1/4" high, 4" wide)
$37.95
(11" long, 4" wide, 4-1/2" tall, Bolt holes
center to center = 5-1/2")
Same gauge, weight & material as original equipment.
Fit to tractor before painting.
Order #
ACS093L
(LH)
ACS093R
(RH)
Price
Application
$97.50
$97.50
Shroud assemblies (toolbox) - USA made
Fits: Early B; Serviceable for Late B, C, CA
NOTE: Not restoration quality, more
rounded then original fenders. To fit Late
B, C & CA customer will need to grind off
brackets.
Order #
ACS201
ACS095R
(RH)
Price
$121.95
ABC472
(4" wide x 16" long x 4-1/4" tall)
Hand clutch lever
Fits: B, C, CA w/ Gemmer Steering
Replaces: 70225244
Fits: RC; Styled WC (1940 & up)
NOTE: Includes mounting brackets.
Not restoration quality.
ACS190
$28.95
$121.95
$175.00
$175.00
Application
Fits: B, C w/ Hand Start
Replaces: 70213325
ACS200
ACS095L
(LH)
Application
Fits: RC, (WC SN: 74330 & up), WF SN: 1904
(11" long, 3-5/8" high, 5-3/8" wide)
ABC308
Order #
Mid Mounted Seat Shock Absorber
w/ Bushings
(Center-to-center compressed = 7-1/4",
Fully extended = 9-1/8)
NOTE: Horizontal bolt holes at each end.
Order #
Fenders
Monroe® easy ride seat parts
IHS329
Seat Spring Coil
IHS584
Seat shock absorbers
Order #
Price
$39.95
Fenders cont...
Fits: CA
Replaces: 70206456 (knob), 70225582 (lever),
912195 (bolt) (Primed)
USA made
$121.95
Fits: B, C w/ Ross Steering
Replaces: 219919
Description
Order # Price
Final Drive Hand Clutch Lever............................. ACS325 .............. $84.95
w/ Knob & Bolt
51
Brake parts cont...
Order #
Price
ACS251
$23.45
Brake parts
Order #
Price
ACS091
$68.95
ACS1995
ACS007
ACS2545
ABC105
ACS070
ABC017
$74.50
$63.50
$59.95
$51.85
$124.40
$14.50
Brake Drum
Fits: B, C, left side of CA
Replaces: 70205527
NOTE: New & improved ductile iron.
Brake Drum
Fits: D17 up to SN: 42000, WD, WD45,
WD45D, Replaces: 70232585
(1-1/2" bore w/ keyway, 2.860" wide,
7.875" O.D.)
NOTE: New & improved ductile iron.
Brake Drum
Fits: G, D10, D12, D14, D15
Replaces: 70239542, 70800668
NOTE: Now made from ductile iron!
ACS1652
52
$10.65
$19.95
ABC164
MIS1131
$14.95
$18.50
$33.95
NEW! Brake Pedal Shaft & Bushings
Fits: G
Replaces: 70800000 (shaft)
USA made
Lined Brake Band (Hinged)
Fits: B, IB, C, CA
Replaces: 70216775
(1 band for 1 wheel only)
Bonded Brake Shoes, Pair
Fits: D10, D12, D14, (D15 up to SN: 9001), G
Replaces: 70230872, 70800487
(1 pair for 1 wheel only)
MIS2547
ACS300
$89.95
$24.90
Brake Shoe Lining Set
Fits: B, IB, C, CA
Replaces: 70209864
(2" wide x 7-3/8" long)
NOTE: For 1 side.
Brake shoe lining sets, parts
Each set includes (2) linings w/ rivets (1 set for 1 wheel only)
ACS1650
ACS252
Brake Pivot Pin
Fits: B, C, CA, Replaces: 70207221
(0.750" dia. x 1.625" long) USA made
NOTE: Zinc plated.
Brake Adjusting Screw
(7/16"-20 NF x 3" long) USA made
NOTE: Zinc plated
ACS298
ACS271
$14.95
$12.50
Brake parts cont...
Fits: D10, D12, D14, (D15 up to SN: 9001), G
Replaces: 70230874, 70800412
(1-3/4" wide x 8-1/8" long x .190" thick)
NOTE: For 1 side.
Order #
ACS2103
ACS268
Fits: D17 up to SN: 42000, WD, WD45,
WD45D, Replaces: 70231633
(2" wide x 6-1/2" long)
NOTE: For 1 side.
Fits: D17 SN: 42001 & up, D19, D21, 170, 175,
180, 185, 190
(1-1/4" wide x 7-1/4" long)
NOTE: For 1 side.
Brake Riveting Tool
(1-1/4" throat, 1/8" dia. rivet punch)
USA made NOTE: Use to rivet brake
linings to existing shoe or band. Includes
a tool to drive out old rivets, a tool to drill
& countersink linings, a tool to peen the
new rivet & instructions. Mounts into vice.
Not for use w/ deep recess shoes. Use for
ABC017, ACS251 shoes.
NEW! Riveting Tool
(For brake shoe & disc relining for most
tractors) (3-3/8" deep throat x 2-1/8" high
throat) USA made
NOTE: Includes 2 punches. Use for
ABC164, ACS252, ACS332 shoes.
Brake Rod Return Spring
Sold individually.
ACS283
ACS266
ACS316
ACS321
ACS1191
Brake Shoe Return Spring
Sold individually.
(3-1/2" o/a length)
Sold individually.
Price
$13.85
$13.95
$5.95
$9.95
$14.50
$12.50
$19.95
Brake Band Return Spring
Fits: RC, WC, WF, W Speed patrol
Replaces: U2649, 70202649
(0.747" body O.D., 0.110" wire dia.,
3.155" o/a length) USA made
NOTE: 2 used per tractor; Sold individually
Brake Rod Return Spring
Fits: WD, WD45, Replaces: 70222670
Sold individually.
Rear axle, parts
Order #
Price
ACS006
$194.95
Front Brake Spring
Fits: D17 up to SN: 42000, D19, WD, WD45
Replaces: 70232564
(3.1354" o/a length, .595" O.D., .081" wire
dia.) NOTE: Also used as a hydraulic oil
control spring on D19 up to SN: 12850. 2
used per tractor; Sold individually.
Brake Shoe Return Spring (Rear)
Fits: D17 up to SN: 42000, WD, WD45
Replaces: 70222501
Sold individually.
Rear Axle Outer Oil Seal
Fits: G
Replaces: 70800166
(1.750" I.D., 2.690" O.D., .500" width)
ACS1314
$51.95
Rear Axle Bearing
Fits: G
Replaces: 70800164, 70928929
(1.5748" I.D., 2.6772" O.D., .591" width)
ACS1531
Fits: D10, D12, D14, D15
Replaces: 70228253
Sold individually.
$13.95
ABC1628 $14.95
Brake Pedal Return Spring
Fits: D10, D12, D14, D15
Replaces: 70239262
(4.590" o/a length) USA made
Sold individually.
Brake Anchor Shoe Pin
Fits: D17 up to SN: 42000, WD, WD45
Replaces: 70232801
(0.752" O.D., 6-5/8" o/a length) USA made
Sold individually.
Fits: D10, D12, D17, D19 (All up to SN:
12020); 170, 175, 615
Replaces: 70251381
(5-1/4" tall, 3.675" O.D.)
USA made
Order # Rear Axle
Fits: G
Replaces: 70800902
(24-3/8" o/a length)
MFS1351 $12.95
Rear Outer Axle Oil Seal
Fits: B, IB, C, CA
Replaces: 70206450
(2.500" I.D., 3.548" O.D., .440" width)
Inner Axle Seal
Fits: G
Replaces: 70800351
(1.187" I.D., 2.004" O.D., .250" width)
ABC1628 $14.95
Inner Upper Final Drive Shaft Seal
Fits: B, IB, C, CA, (D14 up to SN: 19001); Also
fits D10, D12, (D14 up to SN: 19001), D15,
ED40, I60, I500, I600 as a differential carrier
seal, Replaces: 70230851, 70232186, 70261958
(1.187" I.D., 2.004" O.D., .250" width)
ACS2105
$51.50
Rear Axle Hub Rubber Oil Seal
Fits: RC, WC, WF, W Speed patrol
Replaces: U2533, 70202533, 79016729
(0.795" wide, 9.975" O.D., 8.550" I.D.)
USA made
NOTE: 2 used per tractor; Sold individually
ACS1529
$18.95
Hydraulic oil filter
Description
Price
Hydraulic Oil Filter................................................. ABC007.............. $9.85
NOTE: Spin on top.
Outer Upper Final Drive Shaft Seal
Fits: B, IB, C, CA, ED40
Replaces: 70206449
(1.375" I.D., 2.720" O.D., .468" width)
Rear axle, parts continue on next page
53
PTO parts cont...
Order #
Price
MIS118
$48.50
Rear axle, parts cont...
Order #
Price
ACS1525
$14.50
ACS2612
$14.50
ABC1543 $13.95
Final Drive Pan Gasket
Fits: B, C, CA, D10, D12, D14, D15, ED40, I60,
I500, I600, Replaces: 70233186 USA made
NEW! Final Drive Pan Gasket (OEM)
Fits: WC, WD, WD45, D17
Outer Differential Shaft Oil Seal
Fits: D10, D12, D14, D15; Industrials: 500,
510, 512, 600, 610, 612, 614, 615, 621, I60, I600
Replaces: 70244961
(1.375" I.D., 2.378" O.D., .312" width)
USA made NOTE: 2 used per tractor;
Sold individually.
Price
ACS272
$59.95
Step (Aftermarket part)
Fits: B, C
(16-1/2" o/a length, 5" pad width)
NOTE: Mounts to square bar by pedals.
ACS1977
ABC2039
ABC1543
$64.95
ABC221
54
$4.50
EACH
Order #
Price
ACS1177
$17.95
ACS2085
$12.95
Oil Seal fits: Some B, C, CA, D10 - D19, H3 I600, 170 - 7000 (All w/ 1-3/8" single speed
PTO assy), Replaces: 70241779
(1.375" I.D., 2.130" O.D., .437" wide)
ABC270
$4.85
Seal fits: RC, WC, WF
Replaces: 70244961
(1.375" I.D., 2.378" O.D., .312" width)
USA made
Fits: B, C, CA, D10, D12, D14, D15, D17, D19,
D21, RC, WC, WD, WD45, 160, 170, 175, 180,
185, 190, 190XT, 200, 6060, 6070, 6080, 7000,
I-40, I-400, I-60, I-600
Replaces: 70207503, 70256906
(1/2" - 20 NF, 7/8" thread length, 13/16" hex
head) USA made
PTO Knob
Fits: RC, WC, WD, WD45
Replaces: 70206456
(3/8" - 24 NF)
Price
Front Wheel Lug Bolt.............................................. ABC399.............. $1.60
NOTE: 5 to 6 used per rim; Sold individually.
PTO Shield
Fits: D14, D15, (D17 up to series IV)
Replaces: 70228549
USA made
NOTE: Powder coat Persian orange #1.
Front Wheel Seal
Fits: B, C, CA, D10, D12
Replaces: 70207365
(2.563" O.D., 1.4735" I.D., 0.5868" tall)
NOTE: Steel & felt. Improved design. This
Steiner exclusive is the best fitting wheel
seal in the aftermarket and is half the the
price of the OEM seal.
Front Wheel Oil Seal
(0.388" wide, 2.047 O.D.)
NOTE: 2 used per tractor; Sold individually;
(this seal is .060 smaller in O.D. than the
original, customers using this seal use RTV
or FORM-A-GASKET on the outside of the
seal to compensate for the difference).
Front Hub Seal
Fits: D10 SN: 3501 - 9000, D12 SN: 3001 9000, D14, D15 up to SN: 9000, D17 up to SN:
42000, RC, WC, WD, WD45, WF (All w/ felt
front hub seals), Replaces: 70202104
(3.156" O.D., 2" I.D., .375" thick)
USA made NOTE: Felt.
Order #
Price
ACS1789
$52.65
Front Wheel Bearing Kit
Fits: B SN: B-101 & up, IB, C, CA, (D10 up to
SN: 3501 & SN: 9001 & up), D12 up to SN:
3001 & SN: 9001 & up, Replaces: 70228459
NOTE: Seals sold separately order ACS1177,
2 used per tractor; Sold individually.
ACS1793
$58.05
Front Wheel Bearing Kit w/ Seal
Fits the following w/ 5 bolt front hub: D10
SN: 3501 & up, D12 SN: 3001 & up, D10, D12
high clearance up to SN: 3501, D14 wide
front only, D15 up to SN: 9001, D17 up to SN:
42001, RC, WC, WD, WD45
Replaces: 70228458
What is back spacing?
Wheel clamp lock nut
(For Axle Shaft & Front Wheel)
Fits: B thru 7000 (All w/ regular axle except
D21, 210, 220)
(3/4"-16 UNF thread)
Description
Order # www.SteinerTractor.com
Front wheels / rims
To determine the width of Wheels / Rims:
Measure the inside (bead to bead) not outside to outside.
Order #
Price
Price
Front Wheel Clamp Lock Nut ............................... ABC254...............$19.50
NOTE: No re-threading necessary on worn shafts. Check size before
ordering.
To determine back spacing lay your
wheel flat on the ground with the back
of the wheel facing up. Lay a straight
edge across the wheel & measure the
distance from the back side of the
mounting surface to the straight edge.
(I.E. The wheel pictured has a back
spacing of 3-5/8").
WHS023 $64.95
3" x 12" Front Wheel w/ Blank Center
Fits: G
Replaces: 70800047
ACS010
$66.95
3" x 15" Front Wheel (5 Lug)
Fits: B, C, CA, D10, D12
Replaces: 70231520
(2-3/4" pilot, 2-5/8" bolt center to center)
USA made
ACS009
$72.50
IHS193
$57.85
Front wheel bolt
Order # Description / Application
Wheel bearing kits
Belt Pulley Drive Seal fits: WC up to SN: 74330, WF up to SN:
1336
Description
PTO parts
ACS280
$13.95
PTO Over-Running Clutch
(1-3/8" Female & Male)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C660F
(1-3/8" - 6 x 1-3/8", 6 spline)
PTO Gearbox Stub Shaft Seal fits: WC, WF up to 1935
Step Assembly
Fits: CA
(16-1/2" o/a length, 5" pad width)
NOTE: Mounts to left side of torque tube.
Price
$7.95
PTO Over-Running Clutch
(1-1/8 Female)
Fits: Tractors up to 75 horsepower
Replaces: Hub City C670F
(1-1/8" - 6 x 1-3/8", 6 spline)
PTO Output Shaft Retainer Seal fits: WC, WF, RC
NOTE: 2 used per tractor, Sold individually.
$59.95
Order #
$48.50
ABC1543 Applications:
Steps - USA made
Order #
MIS138
Front wheel seals
Front Wheel (5 Lug)
Fits: (D10, D12 when equipped w/ 16" rim),
D14, D15, Early D17, WC, WD, WD45, WF
Replaces: 70232832
(4.25" x 16", 3-3/8" pilot, 3" bolt center to
center) USA made NOTE: Not recommended
for tractors w/ loaders. We recommend new
lug bolts & retorque lug bolts periodically.
4.25" x 16" Front Wheel (Blank Center)
Fits: WF
Replaces: 70206134
(13.465" I.D.)
USA made
WHS042 $65.60
6" x 15" Front Wheel (6 Lug)
(6" bolt circle, 4.625" pilot hole, 4-3/4" back
spacing)
USA made
WHS022 $68.50
Front Wheel (6 Lug)
w/ (4) Wheel Weight Holes
Fits: Some Late D15, D17, D19, 160 thru
190XT, 6060, 6070, Replaces: 70235086,
70248460
(4.5" x 16", Pilot hole = 4.625", 6" bolt circle,
4" back spacing) USA made
NOTE: For 5:50 x 6:00 x 16" tires.
Front wheels / rims continue on next page
55
Front wheels / rims cont...
To determine the width of Wheels / Rims:
Measure the inside (bead to bead) not outside to outside.
Order #
Price
WHS043 $78.25
WHS070 $86.45
Front Wheel (6 Lug)
Fits: Some D17 SN: 75001 & up, D19, 160, 170,
175, 180, 185, 190, 190XT, 200, 6060, 6070, 6080,
7000, I60, I600 & others using 6" x 16" 6 lug
rim, Replaces: 70235727, 70237405
(6" x 16", Pilot hole = 4.625", 6" bolt circle,
4-3/4" back spacing) USA made
Front Wheel (6 Lug)
Fits: Some 160 thru 7000 series
(All w/ 8" x 15" 6 lug rim), Replaces: 70255499
(8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back
spacing)
USA made
Order #
Price
WHS059
$53.75
EACH
Rear Tube only
(For 11.2, 12.4 x 24" Tires)
WHS058
$56.55
EACH
Rear Tube only
(For 11.2, 12.4 x 28" Tires)
WHS061
$80.25
EACH
Rear Tube only
(For 13.6, 14.9 x 28" Tires)
WHS062
$56.95
EACH
Rear Tube only
(For 9.5 x 32" Tires)
WHS063
$64.95
EACH
Rear Tube only
(For 11.2, 12.4 x 34" & 36" Tires)
WHS064
$65.25
EACH
Rear Tube only
((For 11.2, 12.4 x 38" Tires)
WHS2513
$89.95
EACH
NEW! Rear Tube only
(For 12.00 x 38", 13.00 x 38", 13.6 x 38",
14.00 x 38", 14.9 x 38", 15.5 x 38" tires)
Price
ABC399
$1.60
NOTE: Tubes are for BIAS ply
Also not for recreational use.
MIS061
$3.65
Need a tire or tube not listed?
Call technical service.
Order #
Price
WHS057
$52.15
WHS051
WHS052
$16.45
$83.75
Description / Size
Triple rib, Tire only
Fits: G
(4.00 x 12")
$3.25
EACH
Tube only (For 4.00 x 12" & 4.80 x 12" Tire)
Fits: G
Triple rib, 6 ply Tire only
For 3" x 15" Wheel
(5.00 x 15")
WHS053
$14.80
EACH
Tube only
(For 4.00, 5.00, 5.50 x 15" Tires)
WHS047
$90.95
(5.50 x 16")
WHS048
$105.75
(6.00 x 16")
WHS049
$110.95
Triple rib, 6 ply, Tire only
(6.50 x 16")
WHS050
$15.25
EACH
Tube only
(For 5.50, 6.00, 6.50 x 16" Tires)
WHS060
$37.95
EACH
Rear Tube only
(For 7.50, 8.3, 9.5 x 24" Tires)
56
MIS063
MIS121
ABC397
$0.50
EACH
$2.75
EACH
Rear Rim Bolt Assembly w/ Nut & Washer
Fits: RC, WC, Early WD w/ 28" Rear Rim
(3-1/2" NC hex head bolt w/ washer)
NOTE: 6 used per rim; Sold individually.
Rear Rim Bolt Assembly w/ Nut
Fits: RC, WC, Early WD w/ 28" Rear Rim
(5/8 x 18 x 2-1/2" NF Carriage bolt)
USA made
Description
Order #
Price
WHS026
$245.75
Order # WHS016
$141.00
Price
Clamp (Plain Style).................................................. ACS276 .............. $24.85
Clamp (Eccentric Style)........................................... ACS274 .............. $24.85
Eccentric Bolt............................................................. ACS281............... $14.45
Price
ABC384 $5.15
Rear Tire Inner Tube Valve
(Air / Water Valve) (New Style)
Fits: Tractor tubes w/ Internal threads
Rear Tire Inner Tube Valve
(Air / Water Valve) (Old Style)
Fits: Tractor tubes w/ External threads
WHS004
$152.00
Rear Rim (6 Loops)
Fits: Some ED40, RC, WC, Early
WD w/ 10" x 28" 6 loop rim
Replaces: 721299
(10" x 28")
WHS1613 $235.95
Flat Base Rear Rim (Blank Center)
(For Stamped Steel 9 Bolt Pattern
Rims)
(10" x 38")
NOTE: Bare finish. Customer must reuse
old center. Must weld or rivet.
WHS024
Rear Rim (Double Bevel)
Fits: Some D21, 190, 190XT, 200, 7000, others
w/ 14" x 38" double bevel rim
Replaces: 70235523
(14" x 38")
NOTE: Has 18 drive lugs.
Brass Nut (For Rear Tire Inner Tube Valve)
$305.20
Rear rims / wheels - USA made
To determine the width of Rims / Wheels: Measure the inside
(bead to bead) not outside to outside.
Price
WHS030
$245.75
Rear Rim (4 Dimple, 2 Blocks)
Fits: B, IB, C
Replaces: 70211201
(8" x 24)
NOTE: Like original
WHS031
Fits: RC, WC SN: 81757 & up,
Early WD, WF SN: 1904 & up
Replaces: 70209464
(10" x 28)
NOTE: Like original
ABC385 $1.40
Order #
NEW! Rear Rim (6 Loops)
Fits: Some ED40, RC, WC, Early
WD w/ 9" x 28" 6 loop rim
(9" x 28")
Rear tire inner tube valves, nut
Flat Washer
(For MIS063)
(5/8" I.D.)
Rear Rim Lug Bolt
Fits: D10, D12, D14, D15, D17, WD, WD45,
170, 175, 180, 185, I-40, I-400, I-60, I-600
(All w/ stamped steel dish)
Replaces: 70225191, 70251815
(9/16" x 18 NF, 1-1/8" thread length,
7/8" hex head) USA made
NOTE: Sold individually. Can also work for
front on some applications.
Rear rims / wheels cont...
ACS281
Rear Wheel Lug Bolt
Fits: G, Replaces: 70207503 & 70256906
(1/2" - 20 NF, 7/8" thread length, 13/16" hex
head) USA made
ACS274
ABC531 $5.15
Rear rim bolts, part
Tires, tubes
tires only, not for radial tires.
Fits: B SN: 58401 & up, IB, C
ACS276 ACS274 Replaces: 70210216
Description / Size
Order #
Order #
Rear rim / wheel clamps, part
Tires, tubes cont...
Front wheel weights, parts
Order #
Price
MHS037
$90.00
MHS038
$3.50
$245.75
Fits: B, IB, C
Replaces: 70212169
(10" x 24)
NOTE: Like original.
Front Wheel Weight
Serviceable for B, C, CA & All 3" x 15"
(5 Hole) rims
NOTE: Sold indvidually.
J-Hook
(For MHS037 Weight)
NOTE: 4 J-Hooks required per weight;
Sold individually.
57
Front weights, parts
Order #
Price
ACS180
$149.95
Rear spinout rims, parts
NOTE: Stop holes are angled.
ACS234
Order #
Price
ACS027
$399.95
WHS007
$399.95
Fits: Some CA, D10, D12
w/ 10" x 24" 4 rail spinout
Replaces: 70225184
(10" x 24") USA made
Fits: D14, D15
Replaces: 70228211, 70232580
ACS028
$399.95
Fits: Some D14, D15, WD, WD45, etc.
Replaces: 70220011
ACS026
$420.00
Fits: Some WD, WD45, 160, others
w/ 12" x 28" 4 rail spinout rim
Replaces: 70226270
WHS008
MIS109
$437.50
$14.95
$36.95
Fits: D17, Some WD45, 170, 5040,
5045, 5050, 6140, others
Replaces: 70237573
NOTE: Rails are drilled for both
style stops (1 rail for MIS109 & 1
rail for MIS108).
Rear Spinout Rim Stop
(For Parallel Drilled Rim Rail)
Fits: Allis Chalmers model
Replaces: 70232274, 70230832
ACS238
$175.00
MIS110
58
$16.50
$8.95
Rear Spinout Rim Stop
(For 90° Drilled Rim Rail)
Fits: Allis Chalmers model
Replaces: 70232274, 70230832
USA made
Stop Bolt (For Rear Spinout Rim Stops)
Replaces: 70218662, 70225190, 72073627
USA made
Front Weight
Fits: D15, D17, D19, RC, WC, WD, WD45
gas, LP, WF
Replaces: 70227272, Casting #AM4162-3
NOTE: Will not fit WD45 diesel.
2-Piece Anchor Kit (For ACS180 Weight)
Fits: RC, WC, WD, WD45 gas, LP only, WF
Replaces: 70227273 (LH), 70227274 (RH)
NOTE: Kit contains LH / RH.
3-Piece Weight Bracket Kit
(For ACS180 Weight)
Fits: D15, D17, D19
Replaces: 70239528 (LH), 70239529 (RH),
70236049 (front) USA made
ACS241
$14.95
Anchor Rod
Fits: RC, WC, WD, (Correct for WD45 gas,
LP only, WF, Replaces: 70227275
(7-3/4" o/a length)
NOTE: Holds up to (3) ACS180 weights.
ACS239
$17.95
Anchor Rod
Fits: D15; Correct for D17, D19
Replaces: 70236047
(9-1/4" o/a length)
NOTE: Holds up to (4) ACS180 weights.
3-point top link pins, parts
Order #
ABC1431
ABC1427
Price
$1.90
$3.25
NOTE: Use MIS109 for the listed spinout
rims.
MIS108
3-point top link pins, parts cont...
ABC1429
$4.25
MIS119
$0.35
Order #
FDS023
FDS346
Price
$23.50
$37.95
Order #
Price
ACS347
$24.95
ACS269
$7.95
ABC2010
$22.95
FDS022
FDS211
$44.95
Top-Link Category 2 Adjustable
w/ forged ends & 1" hole
(16-3/4" tube length)
Drawbars, parts cont...
Order #
Price
ACS301
$59.95
ACS356
$127.60
ACS261
$284.50
Snap Coupler Repair Kit (13 pcs)
Fits: D10, D12, D14, D15, D17, D19, WD,
WD45, 190, 190XT
NOTE: 2 kits used per tractor; Sold
individually. See website for contents.
Snap Coupler Spring
Fits: D10, D12, D14, D15, D17, D19, WD,
WD45, 190, 190XT
Replaces: 70235881, 327360
Sold individually.
Adjustable Stabilizer Bar
(For tractors w/ Category I 3-point)
Adjustable from 27-1/2" to 37" length,
23" center tube length, 7/8" threaded ends,
7/8" pin holes NOTE: Adjustable ends
for desired length. Normally 2 used per
tractor; Sold individually.
3-Point Lift Arm Category 2 to a Category 1
3-Point Hitch Reducer Bushing
(1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length)
ACS310
$64.95
Drawbar
Fits: G (Exact for up to SN: 26750)
(Will work on SN: 26751 & up)
Replaces: 70800455
(21-3/16" drawbar length) USA made
Drawbar Guide Assembly
Fits: WD, WD45
Drawbar Yoke Assembly
Fits: D14, D15, D17 (series I, series II and
also series III w/ snap coupler hitch)
Replaces: 70232074, 70232073, 70231146,
70224650 USA made NOTE: Can be used
for heavy duty applications for D14 & D15.
Description
Order # Price
Allis Chalmers Spinner.......................................... MIS130............... $77.75
(WD, WD45 style; 48" x 28", 18-1/2" dia.)
Deluxe tractor umbrellas
Four oil-tempered spring steel bows are
locked into place with individual spring
clips, providing ease of operation and
a rigid framework for the cover. Frame
constructed of tubular steel. All metal
parts, including frame and mounting
brackets, zinc plated for rust resistance
and lasting appearance. 54" square cover is
made of durable polyester material. Each
corner is double reinforced and has heavy
steel grommets. Complete with universal
mounting bracket. Can be mounted on
side of fender, rear end / axle housing,
foot platform.
Drawbar Lock Category 1
(For FDS022)
$2.15
Drawbar Hanger
Fits: G (Exact for up to SN: 26750)
(Will work on SN: 26751 & up)
Tractor spinner
Standard Drawbar Category 1
Fits: D10 thru D15, 5015 thru 6040
Replaces: 70234854
(1" x 2-1/2" x 26", 7/8" pin size)
ABC1433
Awesome in size & realism, these yard /
garden spinners share the exact detailing
as the real thing! Made with fade resistant
TM
®
SolarMax & SunTex fabric each spinner
withstands daily UV rays, rain & snow.
Includes a heavy duty fiberglass pole &
ground stake. Licensed.
$29.99
Category 2 3-Point Top Link Pin
w/ a Category 2 (3-point hitch)
(1" O.D., 4-1/4" usable length, 6" o/a length)
3-Point Lynch Pin
Fits: Allis Chalmers models equipped
w/ a 3-point hitch using a .420" dia. pin
Replaces: 70244066
(1-5/8" usable length)
Top-Link Category 1 Adjustable
w/ forged ends & 3/4" hole
(16" tube length)
Drawbars, parts
(3/4" O.D., 2-3/4" usable length,
4-5/8" o/a length)
w/ a Category 1, 3-point hitch
(3/4" O.D., 4-3/4" usable length,
6-1/2" o/a length)
Description
Order # Price
Orange Deluxe Umbrella w/ Brackets ................ ABC2372............ $174.95
White Deluxe Umbrella w/ Brackets ................... ABC2362............ $174.95
59
Allis Chalmers: Miscellaneous
Mylar decals - USA made
(Unless otherwise noted):
(usually 3 - 4 weeks). Wash area with soap & water (new paint
Price
DEC302
$38.00
D12 series I up to SN: 1950 (1959-60
w/ black bar grille), Replaces: 234495
DEC354
$50.00
D14 up to SN: 18230 gas (1957-59)
Replaces: 232596
(Silver w/ black border; Oval model letter)
DEC214
$38.00
D14 series I SN: 19001 & up (1959 & up)
Replaces: 233542
(Black letter w/ black border)
DEC303
$38.00
D15 series I up to SN: 13000 (1960-62)
Replaces: 233542
DEC385
$76.00
D15 series II SN: 13001 to 25419 (1963-68)
Replaces: 240148
DEC356
$50.00
D17 gas up to SN: 24000 (1957-59)
Replaces: 230280
(Oval model letter)
DEC357
$54.00
D17 diesel up to SN: 24000, Replaces: 230279
(Oval model letter)
I & T Shop Service™ manuals - Printed in USA
DEC215
$38.00
D17 SN: 24001 to 31625 gas only (1959-60)
(All w/ black bar grille), Replaces: 232600
apart, how to fix it and how to put it back together again. These
DEC304
$96.00
D17 series III SN: 42001 to 72768 gas only
(1962-64), Replaces: 237554
DEC213
$76.00
D17 series IV SN: 75001 & up gas only
(1964 & up), Replaces: 241970
DEC384
$76.00
D17 series IV diesel SN: 75001 & up
(1964 & up), Replaces: 241969
DEC212
$92.00
DEC056
DEC433
included) on which decal is to be placed.
FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to border
of design where possible prior to removing white backing paper.
Lightly spray the area with window cleaner (do not use window
cleaner in aerosol can). Peel white backing paper from decal and
place in position. Squeegee window cleaner from under decal
beginning in center and working outward. If air bubbles occur,
puncture with pin & smooth down. Please note: These decals
have been printed on a tough mylar film using mylar ink. A
pressure sensitive adhesive has been employed on the back of the
mylar to insure good adhesion to any clean, hard surface.
FOR VINYL CUT DECAL (NO FILM BETWEEN LETTERING) SPECIAL
ORDER ONLY: Peel backing paper from decal. The decal will be
stuck to the application paper. Align the decal using the design,
not the application paper, and firmly press decal into place. Slowly
remove the application paper starting at one corner. Please note:
The colors are fused into the vinyl eliminating stacking.
CAUTION: Inspect all decal pieces before applying to tractor. NO
REFUNDS on mylar decals if applied to surface and/or if damaged.
NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do
not soak in water.
DEC049
DEC465
DEC288
DEC215
DEC047
Application
DEC465
$7.50
Allis Chalmers square
(4-1/2" x 4-1/2)
DEC051
$32.00
B (up to & including 1939)
(Blue w/ Long A & S)
DEC288
$25.00
B (1939-44)
(Black w/ Long A & S)
DEC255
$25.00
B (1944 - up)
(Black w/ Even letters)
DEC052
$25.00
C (1944 & up), Replaces: 213322
(Black w/ Even letters)
DEC053
$25.00
DEC301
$38.00
60
Order # Price
Allis Chalmers Data Book...................................... BOK074.............. $19.95
An I & T Shop Service™ Manual tells you how to take a tractor
Operator manual reprints
An Operator’s Manual (reprints only) sometimes referred to as
the Owner’s Manual is the manual that came with the tractor. It
is the manual that was given to the ultimate consumer by the
manufacturer. It can be compared to the manual you receive in
the glove box of a new car. This manual gives the owner-operator
instructions, shift patterns, capacities (anti-freeze, crankcase, etc.)
and adjustment procedures (brakes, clutch, etc). This is a very
useful and valuable tool in operating your tractor.
Service manual reprints
A Service Manual Reprint with wiring diagrams tells you how
to take the tractor apart, how to fix it and how to put it back
together again. It is a reprint of the manual that the factory
furnished the dealer’s shop service department, and was not
sent or given to individual retail customers. It deals with repairs
in the language of a mechanic. Often times it includes valuable
information as to specifications, torques, etc. A service manual
reprint will offer many short cuts and save you time!
are authentic manuals that deal with repairs in the language of
a mechanic with an easy to use format. They include valuable
information as to specifications, torques, etc. illustrated by
exploded views and photos. If you are in serious repairs or
restoration, you need an I & T Shop Service™ Manual. It will offer
many short cuts and save you time!
REP031
REP033
REP034
REP035
D21 series II SN: 2201 & up (1965-69)
Replaces: 245998
REP031
$15.50
B (Operator’s Manual)
REP032
$15.50
C (Operator’s Manual)
$25.00
G
REP036
$19.50
$46.00
G
Vinyl cut
B & C (Service Manual)
NOTE: Includes electrical wiring diagram.
REP033
$15.50
CA (Operator’s Manual)
REP037
$19.00
CA (Service Manual)
REP094
$23.95
D14 (Service Manual)
REP034
$15.50
G (Operator’s Manual)
REP039
$19.50
G (Service Manual)
REP093
$24.95
G (Implement setup, maintenance & repair
manual)
REP035
$15.50
WC 1935 (Operator’s Manual)
REP002
$15.50
WC 1939 (Operator’s Manual)
REP038
$19.50
WC (Service Manual)
REP003
$15.50
WD (Operator’s Manual)
$32.00
$32.00
CA, WD. The decals had a clear background w/ black letters.
Price
Description
Price
symbol decal drawings were made in June 1951 & included the B,
Order #
Application
Order #
DEC055
Allis did not use model symbol decals before 1951. The model
Allis Chalmers Farm Tractors & Crawlers
Data Book by Terry Dean
Put everything you need to know about
Allis Chalmers tractors in your hip pocket!
Beginning with the model 10-18, this book
covers all major Allis Chalmers tractor
and Crawler models produced up through
1963. Packed with specs, serial numbers,
engine codes, dates of manufacture, decal
placement, options and original prices.
Ideal for auctions! (Sftbd., 4-1/2" x 7-1/2",
192 pgs., 60 b&w ill.)
Order #
INSTRUCTIONS: Have the pitted area filled, sanded smooth
& painted. Paint must be completely dry prior to installation
Data book
Mylar decals cont...
RC (Blue)
NOTE: RC letters are NOT included.
Available by special order only.
WC (1934-38) (Blue w/ Bord)
NOTE: Serviceable for 1933 but blue letters
instead of black, has long 'A' & 'S' letters.
DEC048
$32.00
WC (1939-40) (Blue w/ Long A & S)
DEC289
$32.00
WC (1941-48) (Black)
DEC054
$25.00
WD (Black)
DEC438
$80.00
WD (Black)
Replaces: 226503
Vinyl cut
AC11
Order #
Price
AC202
AC201
Application
AC11
$31.95
B, C, CA, G, RC, WC, WD, WD45 diesel, WF
AC201
$34.95
Allis Chalmers Collection: D10, D10 series
III, D12, D12 series III, D14, D15, D15 series
II, D17, D17 series III & IV, 160, 170, 175
NOTE: Includes electrical wiring diagrams.
AC202
$34.95
Allis Chalmers Collection: D19, D19 diesel,
D21, D21 series II, Two-Ten, Two-Twenty, 180,
185, 190, 190 XT, 200, 7000, 7010, 7020, 7030,
7040, 7045, 7050, 7060, 7080 NOTE: Includes
electrical wiring diagrams for D19, D21, 180,
185, 190, 190XT, 200, 210, 220, 7000. Does not
include electrical diagrams for 7010 thru
7080.
Application
DEC055
$34.00
WD45 (Black)
DEC439
$80.00
WD45 (Black)
Vinyl cut
DEC383
$44.00
WD45 diesel (Black)
CA, Replaces: 225338
(Black)
DEC050
$32.00
WF (1937-40)
(Blue w/ long A & S & w/ Border)
REP001
$15.50
D10 series I up to SN: 1950 (1959-60)
Replaces: 234495
DEC254
$32.00
WF (after 1940)
(Black w/ long A & S)
WD45 (Operator’s Manual)
REP092
$18.95
WD & WD45 (Service Manual)
61
Parts manual reprint - Printed in USA
A Parts Manual (reprint only) has exploded views of all parts
on the tractor. With numbered pictures giving you great detail
on assembly and disassembly. It also gives you a guide, with
numbers, for ordering parts, and makes you seem much more
informed when talking with a dealer. Many service manuals, after
telling you how to disassemble & repair in detail, will simply say
"reassemble". If you have your PTO in the wash tank, in pieces,
without notes, you have a problem. The parts manual can help
you out with an exploded view of the PTO unit, and you can see
immediately how it all goes back together. You need a parts
manual!
REP031
REP033
REP034
Order #
Price
REP1734
$49.95
B, C
REP1815
$44.95
CA
REP1813
$44.95
D14 up to SN: 19000
REP1817
$34.95
G
REP1737
$47.95
WC, WF
REP1739
$50.95
WD, WD45 gas, LP, diesel
REP035
Application
Engine rebuild videos - USA made
Shows how to completely rebuild the
FROM OUR CUSTOMERS!
tractors' engine. You will see the engine
disassembled down to the bare block
and then rebuilt step by step is an easy
I have received the order, including the hat.
It is very nice! Thanks for sending it. I've had a lot of
compliments on it! - Dan I.
format
Tune-up videos
Includes rebuilding the carburetor and
distributor, oil and filter change, brake
adjustment and more!
VHS Videos are on CLOSE OUT and may be
unavailable.
D = DVD (Replacing the VHS videos)
Order #
Price
VID13
$18.00
VID13D
$20.00
VID14D
$20.00
62
Application
WC, WD, WD45, WF, WI, WS
(Engine Rebuild)
WC, WD, WD45, WF, WI, WS
(Tune-Up)
Best service I've ever had.
Quick and packed like it was going to the moon.
I've been restoring tractors for thirty years, stayed with
the same company, no more. You have my every need!!
Thanks Steiner Tractors my new tractor source!!!
- Steve

1 Allis Chalmers A C Allis Chalmers

Transcription

Similar documents

Allis Chalmers - Steiner Tractor Parts

Allis Chalmers - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

International 5 - Steiner Tractor Parts

Massey Harris/Ferguson - Steiner Tractor Parts

Minneapolis Moline - Steiner Tractor Parts

Ford 4 - Steiner Tractor Parts

Four Generations - Steiner Tractor Parts

Case - Steiner Tractor Parts

Ford 4 - Steiner Tractor Parts

A brief history about Ford

FOR ALLIS-CHALMERS