docFord 4 - Steiner Tractor Parts
download 
Report Transcription
Ford 4 - Steiner Tractor Parts
4 Ford Michigan is the birthplace of the modern automobile and Henry Ford was the first to imagine the modern assembly line manufacturing style. The 9N & 2N Ford tractors designed by Harry Ferguson was highly innovative, with other tractor manufacturers eventually adopting the Ford style three point hitch weight transfer system. View more pictures & tractor stories in our digital book! www.SteinerTractor.com > Steiner Community > Tractor Stories Photos submitted by folks just like you! A. "56 Ford Model 640" Eric Oberdorf, West Plains, MO B. "8N 1950 and Ford 2000 1964" Robin Boulianne, Jonquiere, Quebec Canada C. "Hay Time" Janet Berthier, Connaught, Ontario, Canada D. "Bailing Hay" Janet Berthier, Connaught, Ontario, Canada Our complete album can be viewed at http://www.steinertractor.com/tractor-photo-winners.html C A D B Ford: Alphabetical Index www.SteinerTractor.com A Air cleaners, parts................... 176 - 177 bolt kit................................................ 176 cap....................................................... 176 clamps.......................................176, 177 clip....................................................... 176 cups..................................................... 176 filter element.................................... 176 gasket................................................. 176 hoses................................................... 177 tubes................................................... 176 unloader valve................................. 177 Alternators, parts...........156, 168 - 169 belts..................................................... 156 bolt kit................................................ 169 brackets....................................168, 169 conversion kits.......................168, 169 mounting kit.................................... 168 pulleys................................................ 168 Amp gauges........................................ 157 Axle, hub, parts....................... 192 - 193 axle shaft........................................... 192 collar.................................................... 193 cone..................................................... 193 cup....................................................... 193 gasket / shim...........................192, 193 hub...................................................... 192 nut & snap ring kit.......................... 192 nuts...................................................... 192 seals..................................................... 193 snap ring............................................ 192 studs.................................................... 192 washer................................................ 192 B Battery cables..................................... 160 Battery covers / trays........................ 160 Battery hold down, parts..... 160 - 161 bolts.................................................... 161 retainers............................................. 161 rod........................................................ 161 Brake parts........................................... 191 backing plate................................... 191 dust shield......................................... 191 felt seal............................................... 191 hole cover.......................................... 191 lever..................................................... 191 repair kits........................................... 191 return spring.................................... 191 riveting tool...................................... 191 screw................................................... 191 shoes................................................... 191 Bumper, front...................................... 173 bolt kit................................................ 173 C Caps...........................146, 149, 154, 163, ..................................176, 177, 178, 185 138 . C Caps cont... air cleaner.......................................... 176 distributor......................................... 163 fuel....................................................... 178 oil / fill breather............................... 146 precleaner......................................... 177 rain....................................................... 149 radiator............................................... 154 radius rod cap.................................. 185 Carburetor, parts..................... 150 - 153 adj needle assys.............................. 151 bushing.............................................. 150 discs..................................................... 151 floats................................................... 151 float valves........................................ 150 gaskets............................................... 151 elbow / strainer assy...................... 150 nozzles................................................ 150 repair kits................................ 152 - 153 throttle shaft................................... 150 venturi................................................ 151 Choke, throttle parts....150 - 151, 180 cables.................................................. 150 control rods...................................... 150 discs..................................................... 151 grommet............................................ 180 knob.................................................... 150 lever..................................................... 180 linkages.............................................. 180 plates.................................................. 180 screw kit............................................. 180 washer................................................ 180 Cigarette lighters............................... 162 Cluster gauges, parts............ 158 - 159 cable.................................................... 159 gasket................................................. 159 sending unit..................................... 159 switch................................................. 159 Clutch parts.............................. 180 - 181 alignment tool................................. 181 bearing............................................... 180 bearing carrier................................. 181 discs............................................180, 181 input shaft retainer........................ 181 kits..............................................180, 181 spring.................................................. 180 Coils..................................... 162, 163, 188 Countershafts..................................... 182 Crankshafts, parts................... 144 - 145 bearings.................................. 144 - 145 gears.................................................... 145 pulley.................................................. 145 seals..................................................... 145 Cylinder heads, parts............ 143 - 144 stud...................................................... 143 valve train kits.................................. 144 D Dash cluster gauge assys..... 158 - 159 cable.................................................... 159 gasket................................................. 159 sending unit..................................... 159 switch................................................. 159 Dash lights, parts............................... 170 bulbs................................................... 170 Dash panel warning light sets...... 157 Data plates........................................... 184 Decals......................................... 202 - 203 Differential housing gasket........... 192 Dipsticks......................................147, 194 Distributor parts..................... 162 - 165 caps..................................................... 163 clips..................................................... 163 coils.............................................162, 163 cover................................................... 163 conductor.......................................... 164 distributors..............................163, 164 gasket kit........................................... 163 plate assy........................................... 163 resistor................................................ 163 retainer wire..................................... 162 rotor buttons.................................... 165 shaft.................................................... 163 spark plugs....................................... 164 spark plug retainer......................... 164 spark plug wiring grommet........ 164 spark plug wiring sets................... 164 tune-up kits........................... 164 - 165 Drag link parts......................... 185 - 186 assemblies......................................... 186 boots................................................... 186 ends..................................................... 186 radius rod ball socket.................... 185 radius rod cap.................................. 185 Drawbars, parts.................................. 200 bolt kit................................................ 200 brackets............................................. 200 clevis................................................... 200 lock...................................................... 200 pin........................................................ 200 DVDs...................................................... 205 E Electrical outlet socket.................... 160 connector plug................................ 160 electrical outlet boot..................... 160 Electrical resistors.............................. 167 junction block.................................. 167 resistor................................................ 167 Emblems / badges...................172, 183 bracket............................................... 172 push clips.......................................... 172 Engine gasket sets............................ 143 Engine oil dipsticks........................... 147 Engine overhaul kits......................... 143 Exhaust pipes...................................... 149 F Fan blades............................................ 155 Fan belts................................................ 156 F Fan shrouds, parts............................. 155 screw kit............................................. 155 Fenders, parts......................... 189 - 190 bolt kits.....................................189, 190 brackets............................................. 190 painting masks................................ 190 rivet..................................................... 190 Flywheel ring gear............................ 148 Front axle parts.................................. 187 bushing.............................................. 187 support pins..................................... 187 Front bumper...................................... 173 bolt kit................................................ 173 Friction disc......................................... 194 Fuel caps............................................... 178 gasket................................................. 178 Fuel gauges......................................... 158 Fuel lift pump...................................... 153 Front grilles, parts................... 173 - 174 bumper kit........................................ 173 knob.................................................... 174 mounting studs......................173, 174 screen................................................. 174 sections.............................................. 174 shell..................................................... 174 spring.................................................. 174 Fuel filters............................................. 179 element.............................................. 179 Fuel line assemblies.......................... 179 rubber bumper................................ 179 screen................................................. 179 Fuel tanks, parts................................. 178 caps..................................................... 178 gasket................................................. 178 shut off valves.................................. 178 Fuel sending units............................. 158 Fuel screen........................................... 179 Fuel shut off valves........................... 178 Fuse holder.......................................... 162 G Gas caps................................................ 178 gasket................................................. 178 Gas tanks, parts.................................. 178 shut off valves.................................. 178 Gauges...................................... 157 - 159 amp..................................................... 157 dash cluster assys..................158, 159 fuel....................................................... 158 oil pressure....................................... 157 tachometers..................................... 159 water temperature......................... 158 Gears................................... 145, 148, 195 camshaft............................................ 145 crankshaft......................................... 145 drive gear.......................................... 195 flywheel ring gear.......................... 148 Gear shift boot.................................... 182 Gear shift knobs................................. 182 Gear shift levers, parts..................... 182 cover assy.......................................... 182 gaskets............................................... 182 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm G Gear shift levers, parts cont. levers................................................... 182 shift pattern decal.......................... 182 shift pin.............................................. 182 shifter plate....................................... 182 spring.................................................. 182 Generators, parts............................... 167 cut-out assy...................................... 167 pulleys................................................ 167 tag........................................................ 167 Governors, parts................................ 153 assemblies......................................... 153 gaskets............................................... 153 mount / timing gear cover.......... 153 repair kits........................................... 153 springs................................................ 153 spring & end assy........................... 153 Grilles, front, parts.................. 173 - 174 bumper kit........................................ 173 knob.................................................... 174 mounting studs......................173, 174 screen................................................. 174 sections.............................................. 174 shell..................................................... 174 spring.................................................. 174 H Hydraulic parts cont. drive gear.......................................... 195 drive hub adaptors........................ 195 drive shafts....................................... 195 gaskets............................. 194, 195,196 gear housing.................................... 195 lever friction plate.......................... 194 lift draft control plunger.............. 194 lift cover friction disc..................... 194 lift cylinder........................................ 193 lift pistons.......................................... 194 lift piston washer............................ 194 o-ring.................................................. 194 piston ring kit................................... 194 pumps.......................................194, 195 pump control valve assy.............. 194 pump shaft....................................... 195 rebuild / repair kits................194, 195 safety valve assy.............................. 194 seal....................................................... 195 shaft bearing.................................... 195 shaft bearing cup........................... 195 quadrant stop kit............................ 193 valve adaptor kit............................. 193 valve chamber assys...................... 194 H Hand cranks......................................... 173 Headlights, parts............169 -170, 343 bracket............................................... 170 bulbs................................................... 170 knob.................................................... 341 reinforcement plate....................... 170 rings...........................................170, 343 sealed-beam bulbs...............170, 343 switch................................................. 343 washer.......................................170, 343 wings.................................................. 170 Hood, parts......................172, 174 - 175 air cleaner funnel............................ 175 air cleaner grille doors.................. 175 battery door..................................... 175 battery door handle...................... 175 battery door hinge......................... 175 bolts.................................................... 175 bumpers............................................ 175 emblems............................................ 172 nosecone........................................... 174 ornament........................................... 175 screen................................................. 175 screw kit............................................. 175 side panels...............................174, 175 spring.................................................. 175 Hub, front, parts................................. 197 bearing kits....................................... 197 cap....................................................... 197 seal....................................................... 197 Hub, rear............................................... 192 Hydraulic parts........................ 193 - 196 bearing assy..................................... 194 bolt...................................................... 195 dipsticks............................................. 194 I Ignition / key switches..................... 166 Ignition parts........................... 162 - 165 caps..................................................... 163 clips..................................................... 163 coils.............................................162, 163 cover................................................... 163 conductor.......................................... 164 distributors..............................163, 164 distributor shaft.............................. 163 gasket kit........................................... 163 plate assy........................................... 163 resistor................................................ 163 retainer wire..................................... 162 rotor buttons.................................... 165 spark plugs....................................... 164 spark plug retainer......................... 164 spark plug wiring grommet........ 164 spark plug wiring sets................... 164 switch................................................. 166 tune-up kits........................... 164 - 165 K Knobs..................................................... 182 L Light switches..................................... 169 M Manifolds, parts...................... 142 - 143 exhaust elbows............................... 143 gaskets......................................142, 143 gasket material................................ 142 hardware........................................... 142 Manuals...................................... 203 - 204 Ford: Alphabetical Index www.SteinerTractor.com M Mufflers......................................... 148 - 149 clamps................................................... 148 heat shield........................................... 149 rear bracket.......................................... 148 N Nosecone................................................ 174 O Oil dipsticks............................................ 147 Oil filters................................................... 147 Oil fill / breather caps, parts.............. 146 elements............................................... 146 gasket.................................................... 146 Oil level indicators................................ 147 Oil pan parts.......................................... 147 gaskets.................................................. 147 plug........................................................ 147 washers................................................. 147 Oil pressure gauges.................. 157 - 158 copper line kit..................................... 157 fittings................................................... 158 terminal blocks................................... 157 Oil pump parts...................................... 146 plunger.................................................. 146 repair kits.............................................. 146 spring..................................................... 146 Outlet socket.......................................... 160 connector plug................................... 160 electrical outlet boot........................ 160 P Painting masks...................................... 190 Pinion shaft seal.................................... 192 Piston ring sets...................................... 153 Plates......................................................... 184 data........................................................ 184 power steering................................... 184 sherman trans instruction.............. 184 Power steering parts........................... 185 cap.......................................................... 185 cylinders............................................... 185 end.......................................................... 185 pulley..................................................... 185 pumps................................................... 185 Pre-cleaner parts....................... 177 - 178 bowls.............................................177, 178 caps........................................................ 177 covers..................................................... 177 PTO parts................................................. 196 caps........................................................ 196 conversion assys................................ 196 gasket.................................................... 196 housing................................................. 196 knob....................................................... 196 over running clutches...................... 196 seals........................................................ 196 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com P Pushrod, parts......................................144 gasket.................................................. 144 grommets........................................... 144 R Radiators, parts........................ 154 - 155 bolt kit................................................. 154 caps...................................................... 154 clamps................................................. 155 drain plug........................................... 154 gasket.................................................. 155 hood pad............................................ 154 hoses......................................... 154 - 155 mounting pad................................... 154 thermostats....................................... 155 Radius rod ball cap............................. 185 Radius rod ball socket....................... 185 Raincaps................................................. 149 Rear end overhaul gasket................ 192 Resistors................................................. 167 assemblies.......................................... 167 terminal junction block................. 167 Rims, front / rear...................... 197 - 200 bearing kits........................................ 197 bolts............................................197, 199 cap........................................................ 197 front hub............................................. 197 nuts...........................197, 198, 199, 200 seal........................................................ 197 stops..................................................... 199 studs..................................................... 199 tires....................................................... 198 tubes.................................................... 198 valves.................................................. 198 washer................................................. 199 Running boards.................................. 190 bracket................................................ 190 hardware............................................ 190 S Seats, parts................................. 187 - 189 absorbers............................................ 188 adjustment handle......................... 188 bearing................................................ 188 bolt....................................................... 188 bushing............................................... 188 bushing kit......................................... 188 coil........................................................ 188 cushions..............................................189 hinge & bolt....................................... 187 pads...................................................... 189 pan seats............................................. 187 pan seat repair kit............................ 187 retaining clip..................................... 188 Index continues on next page 139 Ford: Alphabetical Index www.SteinerTractor.com S Seats, parts cont. rubber bumper................................... 188 springs..........................................187, 188 support rod.......................................... 188 Sediment bowl assys................ 178 - 179 bail assy................................................. 178 bolts.......................................................179 gaskets.........................................178, 179 bowl....................................................... 178 screens.........................................178, 179 Sending units......................................... 158 Serial numbers...................................... 141 Sherman transmission plates........... 184 Shift lever knobs..........................181, 182 Spark plugs............................................. 164 Spark plug wire sets............................ 164 Spindle parts.......................................... 187 bearing.................................................. 187 bushings............................................... 187 dust seal................................................ 187 Starters, parts.............................. 165 - 167 drive assemblies................................ 165 ignition / key switches..................... 166 ignition key.......................................... 166 push button switches...................... 166 push / pull switches.......................... 166 rubber covers...................................... 166 safety starter switch......................... 167 solenoid relay assys.......................... 165 tag........................................................... 165 terminal repair studs........................ 166 Starter hand cranks.............................. 173 Steering plates...................................... 184 Steering parts............................. 184 - 185 bearing kits.................................184, 185 column cover kit................................ 184 hardware kit........................................ 184 seals...............................................184, 185 sectors................................................... 184 shaft.......................................................184 Steering wheels, parts............ 183 - 184 bushing................................................. 184 cap.......................................................... 183 emblem................................................. 183 grommets............................................. 184 nuts......................................................... 183 plates..................................................... 184 spinner.................................................. 183 washer................................................... 183 T Tachometers, parts.............................. 159 cables..................................................... 159 Tail pipes.................................................. 149 Tail lights, parts....... 170 - 171, 342, 343 brackets................................................ 171 bulbs................................... 171, 342, 343 140 T Tail lights, parts cont. gaskets.................................................. 343 lenses.................................. 171, 342, 343 license light lens................................ 343 retainer springs.................................. 171 ring......................................................... 343 Terminal junction block..................... 167 Thermostats........................................... 155 gaskets.................................................. 155 Three-point hitch parts... 200, 201, 202 bolt kit................................................... 200 brackets................................................ 201 bushing................................................. 201 clevis...................................................... 200 drawbar check chain........................ 201 drawbar lock....................................... 200 drawbars, standard........................... 200 drawbar assys., swing...................... 200 eyelet assembly kit........................... 201 gasket.................................................... 202 leveling box assys.............................. 201 leveling box fork................................ 201 leveling rod.......................................... 201 lower lift arms..................................... 201 pins...................................... 200, 201, 202 rockshaft arm...................................... 201 stabilizer bar........................................ 202 stabilizer kit......................................... 202 top-links................................................ 201 Throttle body repair bushing........... 150 Throttle parts................................151, 180 control linkages................................. 180 control rods......................................... 180 disc.......................................................... 151 grommet............................................... 180 lever........................................................ 180 plates..................................................... 180 screw kit................................................ 180 washer................................................... 180 Timing gear cover gaskets..... 145 - 146 Tires & tubes........................................... 198 nut........................................................... 198 valves..................................................... 198 Toolboxes................................................ 190 Tie rod parts................................ 185 - 186 assemblies............................................ 186 boots...................................................... 186 ends........................................................ 186 radius rod ball socket....................... 185 radius rod cap..................................... 185 Transmission parts.................... 181 - 182 cable....................................................... 181 gaskets.................................................. 182 lever cover............................................ 181 plugs...................................................... 181 seal.......................................................... 181 levers.............................................181, 182 Ford: Beginning serial numbers T Transmission parts cont. shift cover assy................................... 182 shift pattern decal............................. 182 shifter plate.......................................... 182 U Umbrellas................................................ 202 V Valve cover gaskets.............................. 144 Valve cover stud grommets.............. 144 Valve grind gasket sets....................... 144 Valve train kits....................................... 144 Video......................................................... 205 Voltage regulators..................... 167 - 168 W Warning lights, parts..................157, 171 bulbs...................................................... 171 lens......................................................... 171 Water pumps.......................................... 156 Water temperature gauges............... 158 Wiring clips............................................. 162 Wiring harnesses.................................. 161 Work light assys.................................... 171 Weight, mounting wedge................. 200 Wheels, front / rear................... 197 - 200 bearing kits.......................................... 197 bolts..............................................197, 199 cap.......................................................... 197 front hub............................................... 197 mounting wedge............................... 200 nuts.............................197, 198, 199, 200 seal.......................................................... 197 stops....................................................... 199 studs....................................................... 199 tires......................................................... 198 tubes...................................................... 198 valves.................................................... 198 washer................................................... 199 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm www.SteinerTractor.com 9N, 2N, 8N serial number location 9N, 2N & 8N serial and engine numbers are incorporated on left hand side of engine block. Model 9N 1939........................... 1 1940................... 10234 1941................... 45976 1942................... 89888 1943................. 105412 Model 2N 1942................... 99003 1943................. 105375 1944................. 126538 1945................. 169982 1946................. 198731 1947................. 258504 Model 8N 1947........................... 1 1948................... 37908 1949................. 141370 1950................. 245637 1951................. 343593 1952................. 442035 Late Model NAA, 600, 700, 800 & 900 serial number is located on left hand side of transmission case at point of joining with starting motor. Model NAA 1953........................... 1 1954................... 77475 Series 600, 700, 800 & 900 1954........................... 1 1955................... 10615 1956................... 77271 1957................. 116368 Series 601, 701, 801 & 901 1957..................... 1001 1958................... 11977 1959................... 58312 1960................. 105943 1953 - 1964 serial number location 1961................. 131427 1962................. 155531 Series 2000 (4-Cyl.), 4000 (4-Cyl.) & 6000 1962..................... 1001 1963................... 11948 1964................... 38931 2000, 3000, 5000, 6600 & 7000 serial and model numbers are stamped on the upper right front corner of the transmission. Engine serial number is stamped on left or right pan rail of block. 6000 serial number is located on left hand front side of trans housing. 8000 & 9000 ID is located inside the radiator filler cap access door. Series 2000 (3-Cyl.) 9000 US Production 1965.............. C100000 1966.............. C124200 1967.............. C161300 1968.............. C190200 1969.............. C226000 1970.............. C257600 1971.............. C292100 1972.............. C327200 1973.............. C367300 1974.............. C405200 1975.............. C450700 Fordson 1917........................... 1 1918....................... 255 1919................... 34422 1920................... 91712 1921................. 162667 1922................. 199448 1923................. 268433 1924................. 370331 1925................. 453341 1926................. 557509 1927................. 645611 1928................. 739581 1929................. 747584 1930................. 757265 Fordson Super Major Series 1961.....08A-300001M 1962..... 08B-740000-A 1963.....08C-781370-A 1964.... 08D-900000-A Dexta serial number stamped on left hand clutch housing. The engine number is stamped on left hand side of block. Fordson Dexta 1958................... 16066 1959................... 22427 1960................... 45216 1961................... 72003 Fordson Super Dexta 1961... 09A-312001-M 1962.... 09B-070000-M 1963.....09C-731454-A 1964.... 09D-900000-A Fordson Major Diesel & Fordson Power Major serial and engine numbers are stamped on left hand flywheel housing or right side of engine block. Fordson Major Diesel Series 1953............... 1247381 1954............... 1276857 1955............... 1322525 1956............... 1371418 1957............... 1412409 1958............... 1458381 Fordson Power Major Series 1958............... 1481091 1959............... 1494448 1960............... 1538065 1961............... 1583906 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 141 Ford: Engine parts www.SteinerTractor.com Order # FDS233 Price $5.95 Manifolds, parts Order # FDS001 FDS001GK3 FDS002B FDS002GK FDS076GK FDS094 FDS094GK Price $70.50 $5.80 $119.95 $9.75 $8.50 $68.50 Description / Application Manifold Fits: 9N, 2N, 8N Replaces: 9N9425 ABC1878 Gasket Set (For FDS001) Replaces: 9N9447, 9N9448 USA made $7.95 Manifold Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. gas series (1953-64) Replaces: B9NN9425A Gasket (For FDS002B) Replaces: 310074, 9N9447, C0NN9448C, EAF9447B, NAA55232A USA made Gasket fits: 2000, 2110, 3000, 3400, 3500, 4000, 4110, 4400, 4500 3-cyl. gas, diesel w/ vertical exhaust Replaces: C5NE9448A Exhaust Manifold Fits: Fordson Dexta, Super diesel w/ vertical exhaust Replaces: 957E-9430A NOTE: Close out $3.95 NEW! Turbocharger to Exhaust Manifold Mounting Gasket fits: 8630 thru TW35 Replaces: D6NN6N640A USA made NOTE: See website for full applications. Description / Application Manifold Nut & Washer Kit (For FDS001) Replaces: 33816S, 34808S (4) Brass nuts (7/16"-20); Yellow zinc plated lock washers (7/16") NOTE: If only a single nut is needed order ABC1878. Manifold Nut & Lockwasher (For FDS001, FDS002B) (7/16" - 20 NF) NOTE: Brass nut, yellow zinc lockwasher. Sold individually. Manifold Nut & Washer Kit (For FDS002B) Replaces: 34673S8, 33816S (7/16"-20 NF) NOTE: If only a single nut is needed order ABC1878. Do not order by tractor model only. To ensure you order the correct rings, you will need the following information: 2 Thickness of 1 Bore size each ring. Order # Price ABC448 $17.90 Order # Price FDS2088 $74.85 FDS2092 $98.50 ABC1830 ABC1835 $13.95 $10.95 ABC1844 ABC1846 $15.95 $22.95 Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (1/16" thick x 12" wide x 24" long) USA made NOTE: Do not use for high temperature applications. ABC2072 $118.50 Gasket Paper For making general purpose gaskets (0.0275" thick x 20" wide x 108" long) USA made NOTE: Do not use for high temperature applications. FDS2098 $72.95 for having the best quality parts and the quick service I received. Take a look at the picture to see how the tractor turned out. - Henry G. 142 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Exhaust elbows, parts cont... Order # Price FDS021GK $2.00 Fits: Some 2N, 8N, 9N 4-cyl. Replaces: 9N6149A FDS2100 FDS2102 Fits: 'Some' NAA, 501, 600, 700, 2000 4-cyl. (1953-64), Replaces: EAE6149A, 86539354 For price & availability call, or visit Special Fits: 'Some' Jubilee, NAA, 501, 600, 700, 2000 4-cyl. series (1953-64) gas, LP Fits: 'Some' 800, 900, 4000 4-cyl. series $152.00 (1954-64) gas, LP Replaces: EAF6149A, 86539359 $66.85 FDS2102: 4" overbore, (3) 0.093" compression rings, (1) 0.187" oil ring Inframe or out of frame kits are available by special order for 9N, 8N, NAA, 501, 600, 700, 800, 900, 2000, 3000, 4000, 5000 thru TW35. Order Parts under Shop Online on our website. Engine gasket sets NOTE: Includes all gaskets & crankshaft seals for major overhaul. Order # Price FDS1323 $32.80 FDS020 $18.95 FDS1327 $83.50 FDS1325 $87.10 1-5/8" FDS020GK $2.00 FDS021 $18.95 2" Description / Application Exhaust Elbow fits: 'Some' NAA, Jubilee, 501, 600, 700, 2000 4-cyl. series (1953-64); Also fits 'some' 800, 900 w/ FDS121 muffler Replaces: NAA55250B (1-5/8" O.D.) Exhaust Elbow to Manifold Gasket (For FDS020 Elbow) Replaces: NAA55232A (2" center hole, 3-3/8" c.c. bolt pattern) USA made Exhaust Elbow fits: 'Some' 601, 800, 900, 1801, 2000, 4000 4-cyl. gas series (thru 1964) w/ FDS398 muffler, Replaces: 310075 (2" O.D.) Application Fits: 9N, 2N, 8N (Front & side mount engines) Exhaust elbows, parts Price Exhaust Elbow to Manifold (For FDS021 Elbow) Replaces: 310074 (2-1/4" center hole, 3-3/8" c.c. bolt pattern) Engine overhaul kits FDS2100: 3.900" bore, (2) 0.093" compression rings, (1) 0.187" oil ring Order # Description / Application FDS2092: 3-3/16" bore, (2) 0.093" compression rings, (2) 0.187" oil rings NOTE: For 3 ring applications, discard 1 oil ring. FDS2098: 3-1/2" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring FROM OUR CUSTOMERS! Just wanted to say thank you Application ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings NOTE: On some engines discard 1 compression & oil ring per cylinder. Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (3/32" thick x 12" wide x 24" long) USA made NOTE: Do not use for high temperature applications. Gasket Paper For making general purpose gaskets (0.0160" thick x 18" wide x 98" long) NOTE: Do not use for high temperature applications. thickness per piston. www.SteinerTractor.com FDS2088: 3-3/16" bore, (3) 0.093" compression rings, (1) 0.156" oil ring Description / Application Exhaust Manifold Gasket Material (1/16" thick x 12" wide x 28-1/2" long) USA made NOTE: Perforated steel core. 3 Quantity of each ring Piston rings can not be returned if opened. Call or email for price and availability of other sizes. Gasket material $5.95 NEW! Manifold Gasket Set Fits: Dexta, Super Dexta Replaces: 957E9448 NOTE: These are the correct gaskets when used w/ a vertical exhaust. ABC2511 FDS1721 $1.75 Ford: Engine parts Piston ring sets - USA made Manifold hardware Fits: NAA, 600, 700 series gas, LP series (1953-57) w/ 7/16" head bolts NOTE: Fits 13 c.i. engines w/ 7/16" head bolts. Fits: 601, 800 thru 4000 4-cyl. (1958-64) w/ 1/2" head bolts NOTE: Fits 134 c.i. & 172 c.i. engines w/ 1/2" head bolts. Cylinder head, parts Order # Price FDS036 $192.50 FDS406 $4.50 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Cylinder Head Fits engines w/ front or side mounted distributors: 9N, 2N, 8N Replaces: 8N6050A Stud (For FDS036) (7/16" dia. x 3" long NC-NF) NOTE: Sold each, this stud is used for 15 of the 18 studs per engine. Cylinder head, parts continue on next page 143 Ford: Engine parts Valve grind gaskets cont... www.SteinerTractor.com Order # FDS1766 Price $4.95 Cylinder head, parts cont... Order # Price FDS466 $158.50 FDS464 $119.95 Description / Application Valve Train Kit (For FDS036) Fits: 9N, 2N, 8N (All w/ rotating exhaust valves) NOTE: Includes: NEW valves, guides, guide clips, springs, locks, retainers, rotators. Crankshafts, parts cont... Description / Application Order # FDS2504 FDS2506 $8.95 NEW! Connecting Rod Bearing (For 0.030" (2.065") undersize rod journal) Fits: 2N, 8N, 9N Replaces: A0NN6211A NOTE: Priced and sold per journal. FDS2508 $8.95 NEW! Standard Connecting Rod Bearing (For standard 2.298" rod journal) Fits: NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967), Replaces: 312026 NOTE: Priced and sold per journal. FDS2510 $8.95 NEW! Connecting Rod Bearing (For 0.010" (2.288") undersize rod journal) Fits: NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl. gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967) Replaces: 312103, EAG6211D NOTE: Priced and sold per journal. $6.50 Pushrod Side Cover Gasket Fits following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF6521D FDS1770 $4.95 Pushrod Side Cover Grommets Fits following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: CONN6589A NOTE: 3 used per tractor; Sold in sets of three. $8.95 Push rod Fits: Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. (1953-64), 6000 gas, LP, diesel Replaces: EAA6565C, EBP6565B, C0AE6565C, 500356 (9.61" o/a length, 5/16" O.D.) USA made Valve grind gaskets NOTE: Includes all gaskets required when replacing the cylinder head. Order # Price FDS036VGK $25.50 FDS453 FDS425 FDS430 $2.65 $65.55 $69.95 FDS455 $13.25 FDS1997 $6.95 144 Description / Application Valve Grind Gasket Set Fits: 9N, 2N, 8N Replaces: 7HA6521, 8BA6571 8N6051A, 9N9448, 9N6022 Description $8.95 NEW! Connecting Rod Bearing (For 0.020" (2.278") undersize rod journal) Fits: NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967) Replaces: 312104, EAG6211E NOTE: Priced and sold per journal. FDS2514 $9.95 NEW! Connecting Rod Bearing (For 0.030" (2.268") undersize rod journal) Fits: NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967) Replaces: C0NN6211B NOTE: Priced and sold per journal. ABC2058 $4.95 NOTE: Bearings not included. Measure bearings before ordering, no returns if package has been opened. Order # FDS207 Valve Grind Gasket Set Fits: 800, 900 series, 1801, 4000 series 4-cyl. gas (thru 1964) (All w/ 172, 192" gas engine w/ 7/16" or 1/2" head bolts) Valve Cover Gasket only Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cylinder (1953-64) (All w/ 134, 172, 192" gas engine) Replaces: EAF6584C FDS231 FDS2500 FDS2502 Price $585.00 $585.00 $8.95 $8.95 Description / Application Crankshaft Fits: 1710 Replaces: SBA115256261 Crankshaft Fits: 1910 Replaces: SBA115256471 FDS2412 $24.95 NEW! Standard Connecting Rod Bearing (For standard 2.095" rod journal) Fits: 2N, 8N, 9N Replaces: 9N6211, 9N6211A NOTE: Priced and sold per journal. ABC1998 $7.95 NEW! Connecting Rod Bearing (For 0.010" (2.085") undersize rod journal) Fits: 2N, 8N, 9N Replaces: 9N6211E NOTE: Priced and sold per journal. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm NEW! Connecting Rod Bearing (For 0.020" (2.075") undersize rod journal) Fits: 2N, 8N, 9N Replaces: 9N6211G NOTE: Priced and sold per journal. FDS2512 Price Crankshafts, parts Valve Grind Gasket Set Fits: NAA, Jubilee, 501, 600, 700 series (1953-57) (All w/ 134 c.i. gas engine & 7/16" head bolts) USA made Valve Cover Gasket fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610; Industrials: 230A, 340, 3400, 3500, 3550, 420, 4400, 4500, 515, etc. gas, LP, diesel (All 3-cyl. 1965 up to 5/31/87) Replaces: C7NN6584B, 81817048 Order # NEW! Push rod .........................................................FDS2394............ $7.50 NOTE: Sold individually. If replacing 1/4" O.D. pushrod, customer must also order #87801302 rocker adjusting screw (not available from STP, Inc.). See website for full applications. Valve Cover Gasket only Fits: 9N, 2N, 8N (1939-52) Replaces: 7HA6521 NOTE: 2 used per tractor; Sold individually. Description / Application Valve Cover Stud Grommets Fits the following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF6570A NOTE: 2 used per tractor; Sold in pairs. FDS1767 Valve Train Kit Fits: Jubilee thru 4000 4-cyl. (1953-64) (All w/ 134, 172, 192" 4-cyl. gas engines) NOTE: Kit includes: NEW valves, guides, springs & locks. Does not include retainers. Price Front Crankshaft Oil Seal Fits: NAA - 4000 4-cyl., 6000 series Replaces: C0NN6700A (2.571" O.D., 1.875" I.D., 0.312" wide) NEW! 11-piece Improved Rear Crankshaft Seal Kit Fits: NAA - 4000 4-cyl., 6000 series Replaces: C0NN6701A, EBU6701A, 84186689, B3NN6336A, C0NN6336A NOTE: Rubber. Front Crankshaft Oil Seal Fits: 2000 3-cyl., thru TW35 gas, LP, diesel (1965 & up), Replaces: C5NN6700A, D5NN6700A, 87802755 (3.268" O.D., 2.362" I.D., 0.433" wide) NOTE: See website for full applications. Ford: Engine parts www.SteinerTractor.com Crankshafts, parts cont... Order # Price Description / Application FDS2038 $39.95 FDS2036 $69.95 Camshaft Gear (standard) Fits: 9N, 2N, 8N (All w/ 4 bolt style aluminum cam gear) Replaces: 91A6256A, 7RA6256A USA made NOTE: Aluminum finish. 44 teeth. FDS2042 $49.95 Crankshaft Gear Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64) Replaces: EAF6306B, 500223 USA made NOTE: 21 teeth. FDS2040 $52.50 Camshaft Gear (standard) Fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64) Replaces: EAF6256M USA made NOTE: 42 teeth ABC021 $39.95 Crankshaft Pulley Fits: 9N, 2N, 8N Replaces: 192160 NOTE: Includes (4) 1/4" - 28 threaded holes for hub when used w/ front mounted loader. For drive hub order ABC1809. Crankshaft Gear Fits: 9N, 2N, 8N Replaces: 48-6306, 486306A, 48-6306A USA made NOTE: 22 teeth. Timing gear cover gaskets Order # FDS2431 Price Application $1.95 NEW! Fits: 9N, 2N, (8N up to SN: 263843) (1939 - early 1950) (All w/ front mount distributor) Replaces: 9N6020A FDS2435 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $2.50 NEW! Fits: 8N SN: 263844 & up (Late 1950 - 52) (All w/ side mount distributor), Replaces: 8N6020C Timing gear cover gaskets continue on next page 145 Ford: Engine parts Oil fill / breather caps www.SteinerTractor.com Order # Price FDS257 $28.75 Timing gear cover gaskets cont... Order # Price FDS2440 Application $2.45 NEW! Fits: Jubilee thru 4000 4-cyl. gas, LP, diesel (1953 - 64), Replaces: EAF6020B, F2NN6020AA, 500046 JDS500 Oil pump parts, repair kits Order # Price FDS366 $18.75 FDS364 FDS384 FDS381 $2.95 $59.60 $60.50 $32.50 ABC042 $12.95 ABC043 $13.50 Description / Application Oil Pump Relief Valve Plunger Fits: 9N, 2N, 8N Replaces: 01A6663 NOTE: Helps to restore low oil pressure. Oil Pump Relief Valve Spring Fits: 9N, 2N, 8N Replaces: 9N6654 NOTE: Helps to restore low oil pressure. Oil Pump Repair Kit (For 9/16" wide oil pump gears) Fits: 9N, 2N, (8N up to SN: 247570) & Oil pump housing 9N6603 Replaces: APN6600A, 9N6608A USA made NOTE: FDS384 contains (2) 9/16" wide gears, main drive gear w/ shaft, bushing & gasket. Check gear width before ordering. Bushing must be sized to fit. ABC044 FDS2437 FDS1392 146 1-Piece Oil Fill / Breather Cap w/ Clip & Copper Filter Element Fits: Late 8N w/ side mounted distributor Replaces: 8N6766B (1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. Oil Fill / Breather Cap w/ Clip & Filter Element Fits: All Ford models thru 1964 Replaces: 8N6766B (1-1/2" tall) NOTE: Economy style. Oil Fill / Breather Cap w/ Replaceable Filter Element Fits: Late 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1950-64) Replaces: 310030 (cap), 8N6782A (filter element) FDS246 Price $7.40 $1.25 $7.20 Valve Cover Vent Breather Element Fits: NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64) Replaces: EAF6866A NEW! Valve Cover Vent Breather Gasket Fits: NAA thru 4000 4-cyl. gas, diesel (1953 - 64), Replaces: EAF6863C, 500499 (2-3/4" O.D.) USA made Oil Fill Cap w/ Gasket Fits: 501 thru 4000 4-cyl. diesel (1958-64); 2000 thru 7500 gas, LP, diesel (1965 & up) Replaces: 310945, C5NE6766C, DONN6766A, 81823295 (2.325" O.D., 2.240" I.D., 2.005" tab to tab, .450" tab width) NOTE: White zinc finish. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Oil Pan Drain Plug Screen w/ Gasket Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (19391964), Replaces: 9N6730WG (plug screen) & 8N6734 (gasket) ABC292 ABC539 $1.75 $7.95 Drain Plug Gasket / Washer Fits: 2000 3-cyl. - TW35, etc. (1970 & up using 3/4" I.D. drain plug) Replaces: C9NN6734A, 81822148 (0.750" I.D., 0.058" thick, 0.973" O.D.) NOTE: Made of nylon. Price ABC049 $8.70 ABC050 Oil Pan Drain Plug Fits: 2000 3-cyl. Thru 5200 (1965-69) using 7/8" drain plug, Replaces: C5NE6730B (7/8" x 18 NF) USA made NOTE: White zinc finish. Measure before ordering. $9.25 Oil filters Price ABC045 $11.95 Fits: 9N, 2N, 8N Replaces: APN6731B (4.064" tall, 3.727" wide) USA made $2.95 ABC047 $14.85 Fits: NAA, Jubilee, 501, 600, 800 series (1953-59), Replaces: CPN6731B (4-3/4" tall, 3-15/16" wide) USA made NOTE: For tractors which have not been converted to spin-on type. $20.95 ABC149 $6.95 Fits: Dexta & Super Dexta diesel 957E, 960E Replaces: EPN6731B (4-7/16" tall, 2-3/4" wide) $9.95 $8.95 Application Cartridge Type Oil Pan Gasket fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cyl. (1953-64) (All w/ 134, 172, 192 c.i. gas, diesel engine)Replaces: EAF6710B FDS2001 Application Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas (1953-64), Replaces: C0NN6750B Order # 7-Piece Oil Pan Gasket Set Fits: 9N, 2N, 8N w/ 120 c.i. engine Replaces: 9N6781 FDS432 Order # Fits: 9N, 2N, 8N Replaces: B2NN6750A Washer / Gasket (For ABC539) Replaces: EBU6734A USA made NOTE: Copper. FDS429 Engine oil level / dipsticks $1.00 Gasket only Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1939-1964), Replaces: 8N6734 ABC1955 www.SteinerTractor.com $20.75 $4.95 FROM OUR CUSTOMERS! I have ordered from you on several occassions, and the service was excellent. Thanks! - Howard W. 1-Piece Oil Fill / Breather Cap Fits: 9N, 2N, 8N w/ front mounted distributor (1939-50) Replaces: 9N6766 NOTE: Like original Order # Filter Element only (For ABC043 Cap) Oil Pump Repair Kit (For .725" thick oil pump gears) Fits: 8N SN: 247571 & up & Oil pump housing 8N6603, Replaces: APN6600B, 8N6608 USA made NOTE: FDS381 contains (2) .725" thick gears, main drive gear w/ shaft, bushing & gasket. Check gear width before ordering. Bushing must be sized to fit. Good evening Description / Application ABC540 FDS374 Ford: Engine parts Oil pan parts Spin-On Type ABC007 Oil Pan Gasket fits: 2000 3-cyl., 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610; Industrials 230A - 555B (All 3-cyl. gas, LP, diesel) (1965 & up), Replaces: F0NN6710AA, 83990594 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $9.85 Fits: 501, 600, 800, 900, 1801, 2000, 3000, 4000 series, 5000, 6000, 7000 thru 7710 Replaces: C7NN6714A, C9NN6714A (5-1/4" tall, 3.675" O.D.) USA made 147 Ford: Engine parts Muffler clamps, bracket cont... www.SteinerTractor.com Order # Price ABC327 $9.95 Flywheel ring gear Fits: All Ford models (1939-64) except Fordson Major, Dexta gas, diesel Replaces: 9N6384 Description Order # FDS463 $21.25 Price Flywheel Ring Gear................................................. ABC070.............. $31.95 Economy muffler clamps USA made Order # Price Dimension ABC568 $2.95 (1-1/2" clamp) NOTE: Use w/ FDS319 exhaust pipe. ABC570 $2.95 (1-5/8" clamp) NOTE: Use w/ FDS121 muffler - 1 end only, FDS124 exhaust pipe. ABC572 $2.95 (1-3/4" clamp) NOTE: Use w/ FDS121 muffler - 1 end only, FDS449, FDS450 exhaust pipes. ABC574 $3.25 (1-7/8" clamp) NOTE: Use w/ FDS398 muffler - 1 end only. ABC576 $3.25 (2" clamp) NOTE: Use w/ FDS398 - 1 end only, FDS402 mufflers. ABC578 $3.25 (2-1/4" clamp) ABC580 $3.25 (2-1/2" clamp) ABC583 $4.95 (2-3/4" clamp) ABC585 $4.95 (3" clamp) ABC2234 $4.95 (3-1/2" clamp) ABC1771 $7.95 (4" clamp) Price FDS116 $7.85 ABC360 148 $9.95 Muffler Clamp Fits: NAA, Jubilee, 501, 600, 700, Early 800, 900 series (1953-57), Replaces: NAA5270A (1-3/4") USA made Price Application FDS404 $34.95 Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, 4400, 4500, 4600 & 5000 gas, diesel 3-cyl. & 4-cyl. (1965 & up) (All w/ purchase of FDS399 Muffler Adaptor if not equipped w/ an existing adaptor), Replaces: C7NN5230AB, C7NN5230AC, C7NN5230Z Rear Muffler Bracket Fits: 9N, 2N, 8N w/ horizontal muffler Replaces: 9N5260 (1-3/4") NOTE: Will fit FDS122 muffler. Order # Price FDS122 $28.75 $15.95 Application FDS121 $20.20 Fits: Some NAA, Jubilee, 501, 600, 601, 700, 701, 800, 900, 2000 4-cyl. gas (All w/ 1-5/8" inlet I.D.), Replaces: NAA5230E $27.95 FDS402 $57.50 Fits: Some 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. gas, diesel (1958-64) (All w/ 2" inlet I.D.), Replaces: 310079 Fits: NAA thru 4000 4-cyl. gas, diesel (1953-64), Replaces: NCA5290A (25-3/4" long) Description Order # FDS124 $9.65 (1-1/4" - 1-7/16" I.D.) FDS398 (Horizontal round body) dimensions: Inlet length: 2", Inlet I.D.: 2", Shell length: 13-1/2", Shell diameter: 3-1/2", Outlet length: 1-1/2", Outlet O.D.: 1-7/8", Overall length: 18", Use w/ FDS021 elbow (gas). If clamps are needed order ABC574, ABC576 or ABC327 clamps. RCS003 $9.80 (1-1/2" - 1-11/16" I.D.) RCS004 $9.95 (1-3/4" - 1-15/16" I.D.) RCS005 $10.35 (2" - 2-3/16" I.D.) RCS006 $10.75 (2-1/4" - 2-7/16" I.D.) RCS007 $10.95 Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000 gas, diesel 3-cyl. & 4-cyl. (1965-75) (All w/ purchase of FDS399 Muffler Adaptor if not equipped w/ an existing adaptor) Replaces: C5NN5230AR (2-1/2" - 2-11/16" I.D.) RCS009 $13.35 (3" - 3-3/16" I.D.) Exhaust Pipe Fits: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 900 w/ 172" gas, 2000 series w/ 134" gas, 4 & 5 speed transmissions & Select-O-Speed (1953-64) (All 4-cyl.) Replaces: NCA5255B NOTE: Use w/ FDS124 tail pipe & FDS121 muffler. $23.10 Horizontal Tail Pipe Fits: NAA, Jubilee, 501, 600, 601, 700, 701, 2000 series w/ 134" gas, 800 w/ 172" gas (1953-64) (All w/ 4 or 5 speed transmission) Replaces: NCA5263B NOTE: Use w/ FDS319 exhaust pipe & FDS121 muffler. FDS124 Dimensions: 1-1/2" Inlet I.D., 54" length, 1-1/2" Outlet I.D. Price FDS450 $21.10 Exhaust Pipe Fits: 801, 1801, 4000 4-cyl. gas (1958-64), Replaces: 311051 NOTE: Use w/ FDS449 horizontal tail pipe & FDS398 muffler. FDS450 Dimensions: 1-3/4" Inlet I.D., 24" Vertical length, 29" Horizontal length FDS449 RCS002 Description / Application FDS319 Dimensions: Length: 35", Inlet I.D.: 1-1/2" Raincaps Price STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm $23.50 NEW! Muffler Heat Shield..................................... FDS2446............. $39.50 Order # FDS402 (Vertical oval body) dimensions: Inlet length: 5", Inlet I.D.: 1-7/8", Shell length: 10-3/4", Shell diameter: 4" x 8", Outlet length: 13-1/4", Outlet O.D.: 2", Overall length: 29", If raincap is needed order RCS005. If clamp is needed order ABC576. FDS319 Price Muffler heat shield FDS121 dimensions: Inlet length: 2-1/4", Inlet I.D.: 1-5/8", Shell length: 13", Shell diameter: 3-1/4", Outlet length: 2-1/4", Outlet O.D.: 1-5/8", Overall length: 17-1/2". Use w/ FDS020 elbow & ABC360 or ABC572 clamps. FDS398 Order # Muffler Adaptor Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000 gas, diesel 3-cyl. & 4-cyl. (1965 & up) Replaces: C3NN5255B FDS399 dimensions: Inlet length: 1-1/2", Inlet I.D.: 1-7/8", Shell length: 11-1/4", Outlet length: 2-3/4", Outlet O.D.: 1-7/8", Overall length: 15-1/2" Fits: 9N, 2N, 8N gas (1939-52) Replaces: 8N5230 FDS122 (Horizontal exhaust system) dimensions: MUFFLER - Inlet length: 2-1/2", Inlet I.D.: 1-1/2", Shell length: 23, Shell diameter: 3-1/4", Outlet length = 8-1/2", Outlet O.D.: 1-1/2", Overall length: 34"; EXHAUST PIPE - Flared inlet, Vertical length: 15-1/2", Horizontal length: 22", Outlet O.D. = 1-1/2". Welded 1-piece assembly - muffler & exhaust pipe. If clamp is needed order FDS116. Exhaust pipes - USA made FDS404 (Vertical round body) dimensions: Inlet length: 4-1/2", Inlet I.D.: 1-7/8", Shell length: 17", Shell diameter: 5-1/2", Outlet length: 7-1/2", Outlet O.D.: 2", Overall length: 29", If raincap is needed order RCS005. If clamp is needed order ABC576. Mufflers - USA made Description / Application Muffler Clamp Kit Fits: 9N, 2N, 8N gas (1939-52) Replaces: CAPN5200A NOTE: Includes: (2) cast iron clamps, nuts, bolts & lock washers. Chrome Muffler Clamp Fits: Same as FDS398 (2") NOTE: Original style. www.SteinerTractor.com Order # FDS399 Muffler clamps, bracket Order # Description / Application Ford: Engine parts Mufflers - USA made cont... Fits the following pipe O.D.: $22.65 Horizontal Tail Pipe Fits: 801, 1801, 4000 4-cyl. gas (1958-64) (All w/ 4 or 5 speed transmission), Replaces: 311050 NOTE: Use w/ FDS450 exhaust pipe & FDS398 muffler. FDS449 Dimensions: 1-3/4" Inlet I.D., 60" length, 1-3/4" Outlet I.D. FROM OUR CUSTOMERS! Thank you for the invoice copy Also, I visited your store yesterday and wanted to say how helpful Randy was at the front desk. He provided me specific information that allowed me to get my Ford NAA back in operating condition. I will continue to use your store to purchase parts needed for my tractor. - Chuck H. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 149 Ford: Engine parts Carburetors, parts cont... www.SteinerTractor.com Order # Price FDS1195 $312.60 Choke parts Order # FDS266 FDS262 JDS718 ABC423 Price $22.95 $4.95 $18.75 $9.95 Description / Application Choke Control Rod Assembly w/out Knob Fits: 9N, 2N, 8N (1939-52) Replaces: 9N9700 NOTE: Pre-bent. Choke Knob (Aluminum) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1939-64), Replaces: 9N9703 (10 - 32 thread) ABC297 ABC230 $7.10 $6.45 Metal Sheathed Choke Cable Fits: Tractors, Forklift & other applications using 47" or less cable NOTE: Metal sheathed w/ "CHOKE" on knob. Cut to length. Universal Choke Cable Fits: Tractors, Forklift & other applications using 72" or less cable NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines. Carburetors, parts ABC133 $6.15 FDS018 FDS1178 Price $156.70 Description / Application Carburetor (NEW, not Rebuilt) Fits: 9N, 2N, 8N Replaces: Marvel Schebler TSX 33, 241A, B, C NOTE: Only fits flathead engines, will not fit overhead valve engines FDS1183 150 VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: Some 601, 701 both w/ TSX 692, 765; 800, 900, 2000, 4000 4-cyl. series TSX 662, 706, 769, 771, 813, 977 (1954-64) Replaces: C3NN9D532A (.080 orifice) USA made NOTE: VITON needle & seat helps stop carburetor flooding. $2.50 Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetors) fits: 9N thru (Early 900 w/ TSX 593, 706) (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size. ABC1152 $13.95 ABC1156 $23.95 $306.75 Carburetor (NEW, not Rebuilt) Fits: 600, 700 (up to 1957) w/ 134 c.i. engine, Marvel Schebler TSX 580 Replaces: EAE9510D, B4NN9510A VITON Needle Float Valve (For Marvel Schebler carburetors) Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700 series (1939+57) (All w/ TSX 33, 38, 83, 241A, B, C, 420, 428, 500, 534, 551, 580, 593) (134 C.I. engines), Replaces: C3NN9564A, 233-536 (.070 orifice) USA made NOTE: Viton needle & seat helps stop carb flooding. ABC513 $312.60 Carburetor (NEW, not Rebuilt) Fits: NAA, Jubilee Replaces: EAE9510A, EAE9510C, B2NN9510A, Marvel Schebler TSX 428 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: 9N, 2N, 8N, NAA, NAB, Jubilee, Golden Jubilee gas (1939-54) Replaces: 9N9553 (Male end (Screen end) - 1/8" pipe thread; female end - 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting; NOT compression fitting. Throttle Shaft (For Holley carburetors) Fits: 2000 3-cyl. thru 555B (1965 & up) Replaces: C5NE9581A No replacement will be given if dirt, rust, etc. is found in the Order # Carburetor (NEW, not Rebuilt) Fits: 501, 601, 701, 2000 4-cyl. (1958-64) w/ 134 c.i. engine Replaces: 310746, 312954, B8NN9510A, Marvel Schebler TSX 692, 765 $37.15 Carburetors are limited to replacement only - NO refunds. carburetor or if it has been taken apart. Description / Application FDS1353 Can't find your carburetor number? Look on page 340. ABC557 $29.30 Ford: Engine parts Carburetors, parts cont... Main Nozzle (For Marvel Schebler carburetor) fits: 9N, 2N, 8N w/ TSX 33, 38, 83, 241A,B & C, 420, Replaces: 9N9530, 47180 USA made Main Nozzle (For Marvel Schebler carburetor) fits: NAA, 600, 700 w/ TSX 428, 500, 577, 580, Replaces: 312949, EAE9530A, 47-270 USA made Main Carburetor Nozzle (For Zenith carburetors) Fits: 9N, 2N, 8N (All w/ carb 10850, 11850) Replaces: C66-47-50 USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price ABC564 $26.40 ABC562 $26.40 Description / Application Main Jet Adjustment Needle Assy. (For Zenith carburetor) Fits: Some NAA, Jubilee, 600 series w/ carb 13876 (3/8" x 24" thread) USA made Main Jet Adjustment Needle Assy. (For Marvel Schebler carburetor) Fits: 801, 901, 1801, 4000 (4-cyl.) (1958-64) w/ TSX 662, 769, 774, 813 Replaces: 311605, C3NN9G504A, 43-722 USA made ABC1159 $5.00 Throttle Disc (For Marvel Schebler carburetor) fits: 9N, 2N, 8N, NAA, 600, 700 w/ TSX 33, 241B, 428, 500, 580 Replaces: 9N9585, 14-175 (15°, 1.105" O.D.) USA made ABC1182 $16.25 Choke Disc (For Marvel Schebler carburetor) fits: 9N, 2N, 8N, NAA, 600, 700 (All w/TSX 33, 241A, B, C, 420, 428, 500, 580), Replaces: 9N9549, 27-530, 27-539 (1-5/16" O.D.) USA made ABC1171 $30.35 Choke Disc (For Marvel Schebler carburetor) fits: 501, 601, 701 (1958-62), 800, 900 (1955-57), 2000 4-cyl. (All w/ TSX 534, 551, 577, 593, 692, 706, 771) Replaces: EAF9549B, 312952, 27-573 (1-3/8" O.D.) USA made ABC1167 $13.25 Venturi (For Marvel Schebler carburetor) Fits: 9N, 2N, 8N (All w/ TSX 33, 38, 83, 241A, B, C, 420), Replaces: 9N9586, C5NN9586B, 46-467 (11/16" dia. throat) NOTE: Plastic www.SteinerTractor.com Carburetor gaskets - USA made cont... Order # Price ABC424 $1.39 Manifold to Carburetor Gasket Fits: 801, 901, 4000 4-cyl. series (1958-64) w/ TSX 662, 769, 813, 966, 970, 972, 973, 977, 988, 989, Replaces: C5NE9447A (2-3/4" c.c. bolt holes, 1-1/2" center hole) ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) Fits: Some 800 thru 4000 4-cyl. series Replaces: EAE9502 NOTE: Fits same carb numbers as FDS212 economy kit. Carburetor floats Order # Price Application ABC036 $11.95 (For small bowl Marvel Schebler carburetors) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700 w/ 134" gas engine (1953-57); Early 800, 900 4-cyl. series w/ 172" gas engine (All w/ TSX 33, 241A, B, C, 428, 500, 551, 580, 593, 692, 706, 765); Power Units w/ TSX 38, 83, 420, 534, 577, 771, 971, 976, 987, 996 Replaces: 9N9550A ABC037 $19.95 ABC190 $15.75 ABC452 $23.60 (For Zenith carburetors) Fits: 800, 2000 3-cylinder, 3000, 4000 3-cylinder, 5000, 6000 (All w/ carb 12471, 12472, 12902, 13875, 13881, 13912, 13913, 13914, 13958, 13960, 13961); Power Units w/ carb 13915, 13916, 13917, 13920 Replaces: Zenith C85-115S ABC1352 $55.40 (For Holley carburetors) Fits: 2000 3-cyl. thru 6600 (1965 & up); Also fits Holley carbs R2923-1A, R3210, R3657, R3658, R3658A, R4111, R4119, R4119A, R4120, R4120- 1, R6852, R6853, R7867, R7896, R8552, R8553, R8554, Replaces: C5NE9550A, 81810964 NOTE: See website for complete application listing. Carburetor gaskets - USA made Order # ABC408 ABC410 ABC416 Price $1.39 $1.49 $1.39 Description / Application Manifold to Carburetor Gasket Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700 (1939-57) w/ TSX 33, 38, 83, 241A,B,C, 420, 428, 500, 580, Replaces: 9N9447 (2-3/8" - 2-7/16" slotted bolt holes, 1-3/16" center hole) Manifold to Carburetor Gasket Fits: Ford models (2-15/16" c.c. bolt holes, 1-3/4" center hole) Description / Application Manifold to Carburetor Gasket Fits: 601, 701, some 800, some 900, 2000 4-cyl. (thru 1964) (All w/ TSX 551, 577, 593, 692, 706, 765, 771); 134 C.I. (1958-64), 172 C.I. (1954-57), Replaces: EAF9447B (2-3/4" c.c. bolt holes, 1-5/16" center hole) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com (For Marvel Schebler carburetors) Fits: 800 w/ TSX; 801, 901, 1801 series, 4000 (1958-64) (All w/ TSX 662, 769, 813, 977); Power Units w/ TSX 966, 972, 973, 988, 989, 993, 994, 997, 998, Replaces: 311608 (For Zenith carburetors) Fits: 9N, 2N, 8N, NAA, 600, 700, 800 & 900 (All w/ carb 10850, 11850, 12492, 12493, 13876, 13878, 13879, 13880) Replaces: C85-28 151 Ford: Engine parts Carburetor repair kits cont... www.SteinerTractor.com Order # Price Description / Application ABC427 $39.95 Economy Carburetor Repair Kit (For Holley carburetors) Fits: 2000 3-cyl. thru 5100 w/ Holley #R3158A, R3210, R3589B, R3656A, R3657, R3658, R4111, R4111-1A, 4111A, R4119, R4119-1A, R4119A, R4120, R4120-1, LIST6852, R6852, R6853, R6863, R7867, R7896, R8552, R8553, R8554 NOTE: Includes repair components for acceleration pump, piston assembly, spring, retainer. Float valve seat not included. Carburetor repair kits Can't find your carburetor number? Look on page 340. Economy carburetor repair kits contain: Needle & seat (unless noted), float lever pin, seal, gaskets & instructions. Basic carburetor repair kits contain: Throttle shaft, needle & seat (unless noted), float lever pin, seal, gaskets & instructions. Complete carburetor repair kits contain: Choke & throttle shafts, ABC1918 needle & seat (unless noted), float lever pin, miscellaneous plugs & screws, throttle shaft seals, adjustment screw & gaskets. Order # Price $34.95 Description / Application Economy Carburetor Repair Kit - USA made ABC220 ABC1346 FDS212 ABC1344 $22.50 $25.70 $21.95 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 9N, 2N, 8N (All w/ TSX 33, 241A, B, C 420); NAA & Jubilee (Both w/ TSX 428); 600 & 700 w/ TSX 500, 577, 580, 692, 765; 800 w/ TSX 551, 593, 706, 771; 900 w/ TSX 551, 593, 706; 2000 4-cyl. w/ TSX 500, 577, 580, 692, 765, 976; Power Units w/ TSX: 38, 83, 420, 534, 577, 771, 971, 976, 987, 996 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 2000 4-cyl. (All w/ carb 9544, 10850, 11294, 11850, A, 12492, 12493, 12494, 12544, 12566, 13876, 13877, 13878, 13879, 13880) NOTE: Fits 61, 68, 161 series Zenith carbs. ABC1349 Economy Carburetor Kit (For Holley carburetors) Fits: 2000 3-cyl thru 5200 w/ Holley # LIST2923-1A, LIST2923-2, LIST2923-3, LIST3012-2, LIST3013-2, LIST3658-2, R2923A, R2923-1A, R3012-3A, R3013-2, R3013-3, R3655A, R3656. Also fits OEM carb #'s: C5NE9510E, C5NE9510G, C5NE9510H, C5NE9510J, C5NE9510K, C5NE9510L, C5NE9510S, C5NN9510F, C5NN9510L, C5NN9510M, C5NN9510N, C5NN9510R NOTE: Includes repair components for acceleration pump, piston assy, spring, retainer. Float valve seat & diaphragm not included. $24.95 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: 800, 4000 (Both w/carb 12471, 13875); 6000 w/ carb 12902 Basic Carburetor Repair Kit Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 800, 900, 1801, 4000 4-cyl. series & Power Units w/ TSX 844, 884, 966, 972, 973, 988, 989, 993, 994, 997, 998 ABC215 $58.50 $18.95 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 801, 901, 1801, 4000 series (1958-64) w/ 172" gas engine (All w/ TSX 662, 769, 813) NOTE: NOTE: Does not include choke shaft. Complete Carburetor Repair Kit Economy Carburetor Repair Kit Fits: 800, 900 & Industrial w/TSX662, 769, 813, 966, 970, 972, 973, 977, 988, 989, 997, 998 FDS1347 152 $37.50 Economy Carburetor Repair Kit (For Zenith carburetors) Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, 4100, 4400, 4500, 4600 & 5000 (All w/ 3 cyl., 1965 & up) (All w/ 13912, 13913, 13914, 13915, 13916, 13917, 13920) (Fits 267 series Zenith carbs) ABC031 Order # Price ABC212 $58.50 ABC213 Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 501, 601, 701 (1958-62); 2000 w/ 134 c.i. gas engine (1952-64) (All w/ TSX 765) $58.50 Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: NAA, Jubilee (1953-54) (Both w/ TSX 428), 600, 700 (1954 - 57) w/ TSX 580 (All w/ 134 c.i. gas engine) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Governors, parts cont... Order # ABC028 Price Governor Assembly (Complete 2 Arm) Fits: 8N (1947-52) w/ proofmeter drive Replaces: 8N18204B FDS248 $68.50 FDS248GK $1.75 Fuel lift pump Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610, 5000, 6600, 230A - 5550 gas (All 1965 & up) Replaces: C5NE9350A, D5NN9350B, F2NN9350AA Description Order # Price Description / Application $224.00 Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 800, 900 series w/172" gas engine (195457) (All w/ TSX 593 & 706) Aluminum Governor Mount w/ Gasket (Timing Gear Cover) Fits: Late 8N SN: 263843 w/ side mounted distributor Replaces: 8N6017B (mount), 8N6018 (gasket) Gasket only (For FDS248 Governor Mount) Replaces: 8N6018 USA made Fuel Lift Pump.......................................................... FDS1990............. $44.95 Governors, parts Order # Price Description / Application ABC290 $1.00 ABC029 $73.95 Basic Governor Repair Kit Fits: 9N, 2N, 8N Replaces: BOK12502, 86979852 USA made NOTE: Kit contains: Gasket, lower race assembly, ball bearing, C-clip, shim & 5/8" governor balls ABC030 $164.30 Complete Governor Repair Kit Fits: 9N, 2N, 8N Replaces: CAPN12502A USA made NOTE: Kit contains: Gasket lower race assembly, shaft assembly, upper race assembly, ball bearing assembly, drive shaft ball stop shim, 5/8" governor balls, bushings, dust seal & C-clip $45.00 $58.50 www.SteinerTractor.com Description / Application Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 9N, 2N, 8N (All w/TSX 33 & 241A, B, C) ABC034 Ford: Engine parts Carburetor repair kits cont... ABC027 FDS489 $99.95 FDS1278 $18.95 FDS1921 $5.75 FDS1917 $5.75 Governor Housing Mounting Cover Gasket Fits: 9N, 2N, 8N Replaces: 9N6022 USA made $224.00 Governor Assembly (Complete 3 Arm) Fits: 9N, 2N (1939-47) w/out proofmeter drive Replaces: 9N18200C STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Governor (Flyweight Style) Fits: NAA thru 960 (1953-58) when using FDS1278; 501 thru 4140 4-cylinder gas, LP (1958-64) w/ engine SN: 26402 & up Replaces: EAF12470A (flyweight), EAF18220C (ball) Governor Compensating Spring & End Assembly Fits: NAA thru 960 (1953-58) when using FDS489 governor; 501 thru 4140 4-cylinder gas, LP (1958-64) w/ engine SN: 26402 & up Replaces: NCA99810A Governor Compensating Spring Fits: NAA, Jubilee, Golden Jubilee (1953-54), Replaces: NAA9827B (8.250" o/a length, 0.435" O.D., 0.059" wire dia) NOTE: Mounts between bellcrank & underneath battery tray. Governor Compensating Spring Fits: 501 thru 4000 4-cyl. gas, LP Replaces: NCA9827A (6.535" o/a length, 0.532" O.D., 0.070" wire dia) NOTE: Mounts between bellcrank & underneath battery tray. 153 Radiator caps www.SteinerTractor.com Order # FDS039 (Black) Radiators, parts Order # Price FDS1859 $294.95 FDS1865 FDS422 ABC209 ABC057 ABC455 $329.95 $255.95 $2.95 $2.35 $2.95 ABC2282 $3.95 154 Price $12.90 Description / Application Complete Radiator (For Pressurized System) Fits: 9N, 2N, 8N Replaces: 8N8005, 86551430 (25" H, 16" W) NOTE: Heavy duty; Does not include drain plug or cap. FDS343 (Chrome Plated) ABC008 (4 PSI) Complete Radiator Fits: NAA, 501, 600, 700, 800, 900, 2000 4-cyl, 4000 4-cyl series (1953-64) (All w/out oil cooler in lower tank) Replaces: C5NN8005AB, NCA8005B,C,D (24-5/8" H, 17-3/8" W) NOTE: Heavy duty. Original style straight fins. Does not include drain plug or cap. Radiator Drain Plug Fits: 9N thru TW35 Replaces: 81465471, 9N8115B, C9NN8115A (1/4"-18 NPT) USA made NOTE: See website for full applications. ABC1396 $8.95 (7 PSI) Order # Price ABC053 $7.95 ABC054 $9.55 Radiator Cap w/ Gasket (For Pressurized System) (For radiators w/ 1" filler neck) Fits: 9N thru TW35, NAA thru 4000 4-cyl. up to 1964; Serviceable for E2NN8100BA, E5NN8100AA -4 PSI instead of 13 PSI Replaces: 2N8100A, ECON8100AA (2.330" O.D., 2.000" tang to tang, 1.500" radiator neck I.D.) NOTE: For 1" tall filler neck. ABC056 FDS1367 $4.50 $6.35 FDS1413 $8.50 ABC492 $2.70 FDS258 $3.60 ABC1398 $5.95 (7 PSI) ABC1394 $5.25 (13 PSI) Radiator Mounting Pad Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000, 4100, 4600, 4610, 5000, 5600, 6600, 7000, 7600; Industrials: 1801, 3400, 3500, 4400, 4500 Replaces: B9NN8125A, C0NN8125A; Can replace if trimmed C5NN8125A, 594762 (2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually. See website for full application info. Wing Radiator Cap (For 4 PSI Pressurized System) Fits: 9N, 2N, 8N (Will not fit Early 9N & 2N w/ ORIGINAL non-pressurized radiator 1939 thru 12/1943), Replaces: 9N8100, 2N8100A NOTE: Pressurized radiators will have filler neck with slots on the outside for the cap; Non-pressurized radiators will have the slots for the cap on the inside of the radiator neck. Underside view Underside view Radiator Hood Pad Fits: 9N, 2N, 8N Replaces: 2N8032 USA made Description / Application $8.75 Underside view Complete Radiator Fits the following tractors w/out oil cooler in lower tank: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4100, 4400, 4500, 4600SU, 4610, 231, 335, 340, 445, 531, 540 (1965 & up) (All 3-cyl. gas, diesel) Replaces: C7NN8005H, E0NN8005MD15M Radiator to Front Support Bolt Kit Fits: 2N thru 4000 4-cyl. (1939-64) NOTE: Fits FDS1859, FDS1865 radiators. Includes (2) carriage bolts, nuts, lock washers. $16.25 Radiator hoses, clamps cont... Radiator Cap w/ Gasket (For Pressurized System) (For radiators w/ 3/4" filler neck) Fits: 2000 3-cyl. thru TW35 ABC1398 Replaces: DOHA8100C, 81855444, 83935904 ABC1394 Replaces: E5TH8100AA, E5TH8100AADS, E2NN8100BA, 83956266, 83957211, 83935905 (2.333" O.D., 2.000" tang to tang, 1.096" tall) NOTE: Fits radiators w/ 3/4" tall filler neck. Underside view Description / Application Radiator Hose (Water pump to radiator lower) Fits: 9N, 2N, 8N up to SN: 263843, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl. & 4000 4-cyl. series (thru 1964) (All without power steering) Replaces: 312588 (1-1/2" I.D.) Radiator Hose (Water pump to radiator lower) Fits: 8N SN: 263844 & up w/ side mounted distributor, Replaces: 8N8286 (1-1/2" I.D.) Radiator Hose (Radiator upper) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) gas, diesel, Replaces: NAA8260B, 310048 (1-1/4" I.D. x 7-3/8" length) Radiator Hose (Radiator upper) Fits: 2000 3-cyl. thru 7700 (All diesels); 2310 - 7610 w/out air conditioning Replaces: C5NN8260A, C5NN8260B, D5NN82601, 81805628, 83907414 (6-7/8" end to bend, 1-1/2" I.D.) Radiator Hose (Radiator Lower) Fits: 2000 3-cyl. thru 7000 gas, diesel EXCEPT 4500, 6000, 6600, 6610, 6640, 6700, 6710 & 6810; Industrials: 230A - 545A (1965 & up) Replaces: 81805637, C5NN8286B, C5NN8286BGV (1.700" I.D.) Clamp (For Upper Radiator Hose) Fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) Replaces: 8BA-8287 (For 1-5/8" O.D. hose) Clamp (For Upper / Lower 1-3/4" to 2" O.D. Radiator Hose) Fits: (9N, 2N & 8N For Upper or Lower); Fits lower radiator hose only: Jubilee, NAA, 501, 600, 700, 800, 900, 1801 Series, 2000 4-cyl., 4000 4-cyl. (thru 1964), Replaces: 60-8287 Ford: Cooling parts www.SteinerTractor.com Thermostats, parts cont... Order # Price ABC052 $11.50 FDS2057 $1.45 Order # Price ABC055 $5.25 Description / Application Order # FDS082 Price Radiator Hose (Cylinder head to radiator upper) Fits: 9N, 2N, 8N Replaces: 2N8260 (1-7/16" I.D. x 10" length, 1-13/16" O.D.) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price ABC051 $22.80 Thermostat w/ Gasket Fits: NAA thru 9600 gas, diesel Replaces: D8NN8575AA, EAF8575BWG (160º Lo-Temp) USA made Thermostat Housing Gasket Fits: NAA - 4000 4-cyl. gas, diesel Replaces: EAF8255A USA made Description / Application $60.05 Fan Shroud Fits: 9N, 2N, 8N Replaces: 2N8146 FDS236 $65.95 FDS443 $2.85 Fan Shroud Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) gas, diesel, Replaces: NCA8146A NOTE: Made to fit original radiator; must be trimmed to fit aftermarket radiator lower neck. Fan Shroud Screw Kit w/ Washers (For FDS082 & FDS236 Fan Shrouds) (#8-32 x 3/8" size) Fan blades Order # Price FDS040 $39.95 Description / Application Fan Blade (4 Blade) Fits: 9N, 2N, 8N, NAA, Jubilee Replaces: 8N8600A Thermostats, parts Order # Description / Application Fan shrouds, parts Radiator hoses, clamps Toward Radiator Ford: Cooling parts Description / Application Thermostat Fits: 9N, 2N, 8N Replaces: B2NN8575A, 9N8575 (160°, 2-1/4" long for 1-1/2" I.D. hose) NOTE: Fits in upper radiator hose, pointed end toward radiator. FDS250 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $37.50 NEW! Fan Blade (3 Blade) Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1954-64) gas Replaces: NCA8600S 155 Ford: Cooling parts Fan belts cont... www.SteinerTractor.com Order # IHS235 Price $9.35 Fan belts NOTE: Verify belt size before ordering. Order # Price ABC058 $14.50 ABC059 FDS1091 ABC191 FDS1108 FDS1453 FDS1458 ABC1648 156 $11.80 $14.00 $10.30 $9.99 $12.50 $12.25 $14.50 Description / Application Fan Belt (For tractors w/ generators not w/ alternator conversion) Fits: 9N, 2N, (8N up to SN: 263844) w/ front mounted distributor, Replaces: 9N8620B (Notched 11/16" x 46-1/2") Fan Belt (For tractors w/ generators & alternator conversion) Fits: Late 8N w/ side mounted distributor, NAA, Jubilee (1952-54), models w/ Delco 10 SI style alternator, Replaces: 8N8620 (Notched 5/8" x 40") Alternator Fan Belt Fits: 9N, 2N, (8N up to SN: 263843) (1939-51) (All w/ front mounted distributor) (11/16" x 43") Fan Belt (For generator only) Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cyl. gas, diesel (1954-64) Replaces: EAF8577A (33/64" x 40-3/4") Fan Belt (For tractors w/ alternators) Fits: 2600 thru TW10, Industrials: 230A thru 755, Replaces: D3NN10C318C, D3NN10C318D, 9604339, 81836785, 83976999, 87800127 (17/32" x 54) Fan Belt Fits: Some 540, 550, 555 (fan w/out 72 amp/ Alt); 976, 5530, 5610, 6700, 6710, A62 Replaces: D8NN8620A, C5TE8620A (17/32" x 45-1/4") Alternator Belt fits the following w/ 72-80 AMP alternators: Some 540 diesel w/ air conditioning, 550 w/ air conditioning; All w/ cab & 10/1/1985 & later; 5110 5610, 6410, 6610, 7610, 7710, 7810, Replaces: D7NN10C318A, E4NN10C318AA, 86514615 (1/2" x 30-1/4") Ford: Gauges NOTE: ABC gauges vary from original appearance. www.SteinerTractor.com For 2" diameter hole. Order # Price ABC016 $12.25 ABC109 Water pumps $12.25 NOTE: NEW not Rebuilt; no core charge. Order # Price FDS053 $61.55 Application Fits: 9N, 2N, 8N Replaces: 8N8501A FDS054 Fits: Jubilee, NAA (1952 - 54) Replaces: CDPN8501B FDS055 FDS2259 $66.15 Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl series (1954-64) gas, diesel Replaces: CDPN8501C (4-3/8" o/a pulley length) NOTE: Includes extended single-groove pulley. $12.25 ABC466 $14.95 ABC2238 $14.95 $62.50 Fits: Fordson Major, Fordson Super Major, Fordson Power Major gas, diesel (All w/out power steering) Replaces: E1ADKN8501B, 82847510 FDS329 FDS407 $56.95 Alternator Fan Belt Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series thru 1964 (17/32" x 38-1/2") Fan Belt (For tractors w/ generators) Fits: (2000 3-cyl. thru 4500 generators only (1965-75)); 6610 (81 thru 3/84) (fan/alt); 8630, 8700 (alternator only thru 12/78), 8730, 8830, (9000 w/ alternator), 9700, TW10 (alternator), TW20, TW30 (A.C. belt); Industrial: 650, 750, 755; A62, A64 (both to 5/76 w/out air) Replaces: C5NE8620B, D4NN10C318A, 86514618, C9NN10C318B, D8NN10C318EA, 81845565 (1/2" x 53-1/4") Description / Application Amp gauges $54.95 Fits: Series 2000, 3000, 4000, 5000 & 7000 (1965-75); 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600 & 7700 (1975-81); 2310, 2610, 2810, 2910, 3610, 3910, 4110 & 4610 (1981-2 /1990); 3230, 3400, 3430, 3500, 3930, 4130, 4500, 4630, 4830 & 5030 (3 / 1990 - present); 5110, 5610, 6610, 6710, 7610 & 7710 (1981 - 10/1988), Replaces: DHPN8N513C, DJPN8A513C, EAPN8A513F, EGPN8A513DA NOTE: Includes singlegroove pulley, does not include rear housing. Pump has 5/16" & 7/16" dia. mounting holes and replaces earlier style pump w/ 5/16" & 3/8" dia. mounting holes. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application (20-0-20) Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (All Ford models thru 1958) Replaces: FAD10850A (Terminal type) USA made NOTE: No logo. (30-0-30) Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (All Ford models thru 1958) Replaces: FAD10850A (Terminal type) USA made NOTE: No logo. Oil pressure gauges, parts NOTE: ABC gauges vary from original appearance. For 2" diameter hole. When ordering a dash mounted oil pressure gauge you will also need to order (1) of the oil gauge fittings depending on the line size to adapt your existing line to the gauge: ABC538, IHS626, ABC2353, ABC2360. Order # Price FDS405 $14.95 ABC082 $18.95 (60-0-60) Fits: 9N thru 4000 4-cyl. w/ Alternator system (Terminal type) USA made NOTE: Stainless steel bezel. FDS401 $14.95 (0-80 PSI) Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1939-64), Replaces: FAD9273A (1/8" NPT male thread) NOTE: Black bezel; Requires 1 of 2 fittings (ABC558 or IHS636). (60-0-60) Fits same as ABC466 (Terminal type) USA made NOTE: Black bezel. ABC005 $18.95 (0-80 PSI) Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1939-64), Replaces: FAD9273A (1/8" NPT male thread) NOTE: Dash mounted. No logo. Stainless steel bezel. ABC523 $23.95 Oil Gauge Copper Line Kit For tractors using 1/8" x 6' copper oil line (6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor) NOTE: Use w/ ABC538 fitting. FDS486 $10.15 Oil Gauge Line to Block Elbow (Oil Terminal Block) Fits: 9N, 2N, Replaces: 9N6722 (1/4" pipe into block, 1/4" tube & 3/16" tube) FDS488 $10.15 (30-0-30) Fits: 9N, 2N, 8N, Golden Jubilee, Jubilee, NAA, NAB, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960 (gas, LP, diesel thru 1957) Replaces: A0NN10670A (Terminal type) Warning lights Order # Price Description / Application FDS1848 $41.50 Dash Panel Warning Light Set (Oil Pressure & Generator) w/ Wires & Bulb Holders Fits the following w/ 12-volt systems: Dexta, Super Dexta, Replaces: E203NE9, E204NE9 (0.550" O.D. lense, 0.822" outer housing dia., 1.715" o/a length, 1.010" flange mounting dia.) NOTE: Red & green lenses. FDS2476 $13.95 NEW! Generator / Transmission Temperature Warning Light w/ 'PAL' nut Fits: 501 thru 5110 (1958 & up) Replaces: 310124, B9NN10241B, 373348S (nut) (Flange is 0.875" O.D., 3/4" - 20 NF thread, 0.885" tall) NOTE: See website for full applications listing. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application (0-50 PSI) Fits: 9N, 2N, 8N Replaces: 9N9273A (1/8" NPT male thread) NOTE: Black bezel. (0-50 PSI) Fits: 9N, 2N, 8N Replaces: 9N9273A (1/8" NPT male thread) NOTE: Dash mounted. No logo. Stainless steel bezel. Oil Gauge Line to Block Elbow Fits: 8N (1947-52) Replaces: 8N6722 (1/4" pipe into block, (2) 1/4" tubes) Oil pressure gauges, parts continue on next page 157 Ford: Gauges Fuel sending units cont... www.SteinerTractor.com Order # FDS199 Price $29.95 Oil pressure gauges, parts cont... Order # ABC2360 ABC2353 ABC538 IHS626 Price $3.95 $3.95 $13.40 $12.85 Description / Application Oil Gauge Adapter Fitting Fits: 2N, 9N Replaces: 9N18685 (1/8" pipe female to 3/16" tubing female) NOTE: Brass. Oil Gauge Adapter Fitting Fits: 8N Replaces: 8N18685 (1/8" pipe female to 1/4" tubing female) Oil Gauge Fitting For gauges w/out removable fitting (1/8" pipe thread to 1/8" tube) USA made NOTE: Brass. Use w/ ABC523 line kit. Order # Order # Price FDS1726 $14.95 FDS423 $15.95 ABC1486 $6.30 NOTE: ABC gauges vary from original appearance. Order # Price FDS2424 $29.95 Description / Application NEW! Water Temperature Gauge w/ Bracket Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel except Majors, Dexta Replaces: C3NN18287A (36" lead) NOTE: Black bezel. For 2" dia. opening. ABC081 $29.95 Water Temperature Gauge Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel except Majors, Dexta Replaces: C3NN18287A (36" lead) NOTE: Stainless steel bezel. For 2" dia. opening. FDS1852 $42.15 Water Temperature Gauge Fits: Dexta, Super Dexta Replaces: 957E10883 (86-1/2" long lead) NOTE: Stainless steel bezel, (Illuminated). For 2" dia. opening Fuel gauges Description Fuel Sending Unit (For 6-volt positive ground, For 12-volt negative ground) Fits: 801, 901 & 1801 series, 4000 4-cyl. (195864) gas, diesel w/ 6-volt or 12-volt Replaces: 6-volt: 310940, 12-volt: 310941 ( 8-3/4" long, Resistance = 14 - 122 OHM range) NOTE: Will work w/ FDS275 & FDS276 fuel gauges. Does not work w/ O.E.M. style fuel gauges. Water temperature gauges Oil Gauge Fitting For gauges w/out removable fitting (1/8" pipe thread to 1/4" tube) USA made NOTE: Brass. (For 2" dia. opening) Fits: 501, 601, 701, 801, 901,1801, 2000, 4000 4-cyl. series (1958-64) FDS275 Replaces: 310948 FDS276 Replaces: 310949 (14-122 Ohm) Description / Application Cluster gauges, parts cont... Price FDS1491 $8.15 w/ Black Bezel NOTE: Will work w/ FDS199 & FDS200 Fuel Sending Units. FDS389 Fuel sending units Order # FDS200 158 Price $29.95 Description / Application Fuel Sending Unit (For 6-volt positive ground, For 12-volt negative ground) Fits: 601 & 701, 2000 4-cyl. series (1958-64) gas, diesel w/ 6-volt or 12-volt systems Replaces: 6-volt: 310938, 12-volt: 310939 (5-1/2" Long, Resistance = 14 - 122 OHM range) NOTE: Will work w/ FDS275 & FDS276 fuel gauges. Does not work w/ O.E.M. style fuel gauges. FDS391 Price Order # Price FDS058 $45.00 Fits: Some 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000, 7000 (1965 & up) Replaces: C5NN10849L, EHPN10849A NOTE: Clockwise needle rotation. For generator equipped tractors only. FDS147 $14.95 FDS060 $55.00 $139.95 Dash Gauge Cluster Assembly Fits: 2600, 3600, 4600, 4600 SU, 2310, 2610, 2810, 2910, 3610, 3910, 4610, 5600, 6600, 7600, Early 5610 (up to 11/1987), 6610 (up to 9/1985); Industrials: 231, 250C, 335, 340, 445, 531, 540, 545, Replaces: 83953544, D8NN10849TB, E5NN10849BA, E7NN10849BA NOTE: Counter-clockwise needle rotation. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Electric Oil Pressure Switch Fits: 2000 3-cyl. thru TW35 except 6000, TM115 thru TM190, TS90 thru TS115 (1965 & up) (All w/ analog gauges) Electric Water Temperature Sending Unit w/ Adaptor Bushing Fits the following 1965 & up: 2000 3-cyl. series, 2600, 3000 series, 4600, 4000 3-cyl. series, 4600, 5000 series, 5600, 6600, 7000 series, 7600, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30; Industrial: 231 thru 340B, 3400, 3500, 3550, 420 thru 4500, 515 thru 755B, Replaces: C4AH10884A, D5NN10884A,B, 81784077, 83903061, 87554838, 87712906 NOTE: Fits either 1/8" or 3/8" thread size as adaptor bushing is including. Order # Price FDS062 $55.00 Tachometer Cable Assembly w/ Metal Sheath Fits: 8N Replaces: 8N17365 (32-1/2" long) Description / Application Tachometer (5 Speed) w/ OEM style needle Fits: 600, 800, 900, 2000, 4000 4-cyl. series (thru 1964) gas, diesel Replaces: C3NN17360K FDS396 $54.95 Tachometer (Select-O-Speed) Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 1964) gas, diesel (All w/ Select-O-Speed transmission) Replaces: C3NN17365A, C3NN17360J ABC565 $13.95 Tachometer Cable Assembly w/ Metal Sheath Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 series 4-cyl. (thru 1964) gas, diesel, Replaces: B9NN17365B (30-1/2" long) $55.95 Tachometer (Tractor Meter) Fits: Dexta, Super Dexta Replaces: 957E17360A, 957E17360D NOTE: Diesel only. Description / Application Tachometer Fits: 8N SN: 245637 & up (1950-52) Replaces: 8N17360A1 Description / Application $139.95 Dash Gauge Cluster Assembly Tachometer Cable w/ Metal Sheath (For FDS389, FDS391 Dash Gauge Cluster Assemblies) Replaces: 82847520, D9NN17365AA, D9NN17365AB (48" long) Tachometers, parts cont... Tachometers, parts Cluster gauges, parts Order # Cluster Gauge Gasket Fits: Same as FDS389, FDS391 Replaces: C5NN10A949C USA made www.SteinerTractor.com FDS1849 6-volt Positive Ground Fuel Gauge........................... FDS275..........$29.95 w/ Black Bezel 12-volt Negative Ground Fuel Gauge....................... FDS276..........$29.95 Description / Application Ford: Gauges FDS1851 $27.95 Tachometer Cable Assembly w/ Nylon Sheath Fits: Dexta, Super Dexta Replaces: 81718522, 957E17365C (34-3/4" long) NOTE: Diesel only. IHS697 Tachometer (4 Speed) w/ OEM style needle Fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel Replaces: C3NN17360N STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $28.50 Tachometer Cable Assembly w/ Metal Sheath Fits the following w/out cabs 12/1987 & up: 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35 Replaces: E8NN17365AA (61-1/4" long w/ key) 159 Ford: Electrical parts Battery covers, trays www.SteinerTractor.com Order # FDS168 Price $59.95 Electrical outlet socket, parts Order # Price ABC395 $24.95 ABC1868 $19.95 Description / Application Electrical Outlet Socket (For Implements w/ Lights) Fits: Ford models NOTE: 2 plated brass pins. FDS169 $59.95 Connector Plug (For ABC395) (3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins, wires must be soldered or crimped. FDS1235 $64.29 NEW! Electrical Outlet Socket Boot Fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. FDS029 ABC2285 $4.95 $64.95 (Heavy Duty; Straight terminals (unless otherwised noted) Fits: Ford models Price Battery Cover w/ Access Door & Battery Decal for cover (For 6-volt system) Fits: 8N w/ flat ground cable Replaces: 8N5162 NOTE: Powder coat Ford red. Battery Cover w/ Access Door & Battery Decal for cover Fits: 1953-57 6-volt round cables; NAA, Jubilee, 600, 700, 800, 900 series (All 6-volt) Replaces: NAA5162A, NCA10718A NOTE: Powder coat Ford red. Battery Tray w/ Air Cleaner Mounting Bolts Fits: 2N (1942-47) Replaces: 2N10732, 2N10734, 2N10735 NOTE: Powder coat gray. FDS1271 $98.10 Specifications Battery Tray (Support Assembly) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 series (1953-64) gas Replaces: C0NN10732T, NCA10732T USA made NOTE: Powder coat Ford red. Battery Tray Fits the following diesel tractors w/ 128 AMP battery: 2000, 2110, 3000, 3100, 3400, 3500, 3550, 4000, 4110, 4400, 4500 (1965-67) Replaces: C5NN10723H Ground Cables (Non-Insulated) ABC401 $13.90 (2 Gauge, EO = 7/16", L = 6") ABC411 $15.80 (2 Gauge, EO = 7/16", L = 9") ABC405 $17.95 (2 Gauge, EO = 1/2", L = 13") ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14") ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19") ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24") Battery hold downs, parts Order # Price FDS371 $38.95 $16.99 (2 Gauge, EO = 3/8", L = 10-1/2") ABC415 $15.40 (2 Gauge, EO = 3/8", L = 12") ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2", 90º terminal ends) ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH ENDS, L = 16-1/4") ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21") NOTE: May have to drill eyelet hole bigger on some applications. ABC419 $19.95 (2 Gauge, EO = 3/8", L = 27") 160 Description / Application Battery Hold Down, Pair Fits: 9N (thru 1942) Replaces: 9N10728C (RH), 9N10748 (LH) NOTE: Sold as a RH / LH Pair. Insulated Battery Cables ABC407 FDS369 Order # FDS370 Price $22.50 Battery Hold Down Fits: 8N, Jubilee, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (thru 1964) (All gas & w/ 6-volt battery) Replaces: NCA10718A (9-3/16" wide x 7-1/16" long; Mounting holes c.c. = 10-1/8") USA made NOTE: 16 gauge steel. New & improved quality! STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Ford: Electrical parts www.SteinerTractor.com $9.95 Battery Hold Down Rod Fits: 2N (1943-47), 8N, NAA Replaces: 2N10728, 8N10728 FDS372 ABC474 $34.95 $17.95 $60.95 Battery cables - USA made Order # Description / Application Battery Tray (Support Assembly) Fits: 8N (1947-52) Replaces: 8N10732 FDS030 EO = Eyelet Opening L = Length Battery hold downs, parts cont... IHS721 $8.95 FDS421 $5.95 Battery Retainer Fits: 9N, 2N (1939-47) Replaces: 2N10721 (9-1/8" long x 7-1/16" wide) NOTE: Improved version to fit 9N. To use on 9N must also purchase FDS371 battery hold down, pair (9N10728C & 9N10748). Battery Hold Down Fits: 501, 601, 701, 801, 901, 1801, 2000 & 4000 series (thru 1964) (All 4-cyl. & w/ 12-volt system), Replaces: 311099 (For Battery size: 16-1/4" long x 7-5/8" wide; Mounting holes c.c. = 17-1/4) Economy main wiring harnesses w/ instructions cont... Order # Price FDS277 $33.75 ABC079 $64.95 FDS376 $34.95 J-Bolt (pair) Fits: Ford models (5/16"-18" UNC x 10-3/4") LH Battery Hold Down Bolt w/ Wing Nut Fits: (NAA, Jubilee when using FDS030 battery tray), 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas (1953-64) Replaces: NCA10728-A (3" o/a length ) Price Application ABC075 $27.95 (For 6-volt Generator Systems only) Fits: 9N, 2N w/ single pole generator Replaces: 2N14401, 9N14401C NOTE: Has flame retardant cloth covering. Instruction sheet included. Does not include ignition switch & light wires. ABC076 $27.95 (For 6-volt Generator Systems only) Fits: 8N w/ front-mounted distributor Replaces: 8N14401B NOTE: Has flame retardant cloth covering. Instruction sheet included. Does not include ignition switch & light wires. ABC077 $27.95 (For 6-volt Generator Systems only) Fits: 8N w/ side-mounted distributor Replaces: 8N14401C NOTE: Has flame retardant cloth covering. Instruction sheet included. Light wires not included, front engine harness only. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fits: 8N w/ side-mounted distributor & 1-wire alternator Replaces: 8NL10301 NOTE: Does not include light wires. (For 6-volt generator systems only) Fits: NAA, Jubilee, 600, 700, 800 & 900 series gas (1953-57) Replaces: FDN14401B NOTE: Light wires included. (For 6-volt generator systems only) Fits: 501, 601, 701, 801, 901 series, 2000 4-cyl., 4000 4-cyl. gas (1957-64) NOTE: Does not include ignition switch wires, light wires or fuel sender wires. Quality wiring harness kits - USA made NOTE: For tractors w/ generators not alternators. Includes light wires & diagram. Original style braiding w/ soldered terminals. Order # Price FDS470 $148.20 Application (For 6-volt generator systems only) Fits: 9N, 2N w/ single terminal generator Replaces: 2N14401, 9N14401B Economy main wiring harnesses w/ instructions Order # Application FDS472 $171.60 (For 6-volt generator systems only) Fits: 8N w/ front mounted distributor up to SN: 263843, Replaces: 8N14401B FDS1703 $183.50 Fits: 8N w/ side mounted distributor SN: 263844 & up (1950-52) Replaces: 8N14401C FDS474 $183.50 (For 6-volt generator systems only) Fits: NAA, Jubilee, 600, 700, 800, 900 gas series (1953-57) w/out fuel gauge Replaces: FDN14401B, FAF14401B NOTE: If customer has a fuel gauge will need to reuse gauge & sending unit wires. 161 Ford: Electrical parts www.SteinerTractor.com Order # Price Description / Application ABC1862 $29.95 6-volt Cigarette Lighter w/ Socket Fits: 8N, NAA w/out bracket w/ 6-volt system, Replaces: 8N9004601 NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". Wiring clips Order # Price FDS271 $1.30 EACH FDS269 FDS267 FDS268 FDS270 ABC545 $2.50 EACH $3.60 EACH $3.60 EACH $9.95 EACH $4.65 EACH Application Fits: 9N, 2N, 8N (1939-52) I. Headlight wiring to hood (7 required) Replaces: 358297S IHS1784 Fits: 8N I. Electric wiring to instrument panel support bracket (1947-52) (1 required) II. Main wiring assembly to instrument panel brace (1 required) III. Wiring to hood top reinforcement (1950-52) (3 required) Replaces: 51C14197 Fits: 8N I. Electric wiring to instrument panel brace (1 required) Replaces: 8N14197 Fits: 8N, NAA, Jubilee (1947-54) I. Rear light wire to brake actuating shaft (2 required) Replaces: 8N14565 Fits: 2000 3-cyl thru 4140 (1965 & up); Serviceable for 8N thru 4000 4-cylinder (up to 1964) I. Rear light wire to brake actuating shaft (2 required), Replaces: 354475S2 & 380568S36 Fits: 8000 thru 9600 & Ind. Replaces: C7NN14411A USA made $22.50 Order # Price 12-volt Cigarette Lighter w/ Socket Fits: 8N, NAA w/out bracket when converted to 12 volt NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". Order # Price ABC348 ABC366 $57.10 $7.75 12-volt Cigarette Lighter w/ Socket Fits: 2610 thru TW35 Replaces: E3NN15760AA NOTE: Black plastic knob w/ the word ''LIGHTER'' in white print. Price $8.95 Description / Application Coils / Resistor ABC011 ABC509 FDS072 FDS1137 $19.95 $19.95 $29.95 $4.65 6-volt Distributor Coil (Metal Housing) & Mounting Bracket fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series; Fits Ford models w/ barrel-type coil (All w/ side mounted distributor), Replaces: D3PF12029AA, E8T12029BA NOTE: See website for full applications. 12-volt Distributor Coil (Metal Housing) & Mounting Bracket fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 4000 series; Fits Ford models w/ barrel-type coil (All w/ side mounted distributor) Replaces: D5TE12029AB NOTE: ABC509 is internally resisted. See website for full applications. ABC061 FDS1150 ABC063 FDS224 $14.99 $3.95 $11.00 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Universal 12-volt Voltage Resistor (2-Terminal Style) Fits: Ford models NOTE: Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery. 1.5 OHMs on 6-volt battery to 4.0 OHMs for 12-volt battery. Resistor gets very hot. Ignition parts cont... Order # Price Dust Cover Assembly Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas (thru 64) Replaces: FAA12239A Distributor Cap Fits: 9N, 2N, (8N up to SN: 263843) (1939-50) Replaces: 9N12106C NOTE: w / front mount distributor Distributor Cap Spring Clip Fits: 9N, 2N, (8N up to SN: 263843) w/front mount distributor Replaces: 9N12144 NOTE: 2 used per tractor; Sold individually. Distributor Cap Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series w/ original style side mounted distributor (thru 1964) Replaces: NCA12106A USA made Distributor Cap Clip / Clamp Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64), 6000 (All w/ side mounted distributor), Replaces: 7RA12144 ABC159 $4.50 Description / Application Distributor Caps, parts cont... ABC128 $13.75 ABC060 $284.30 Distributor Cap (OEM) Fits: 2000, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4100, 4400, 4500, 4600, 4610 3-cyl. gas (1965-80), Replaces: C5NF12106A, E3NN12106A, 83937262 USA made Front Mount Distributor Fits: 9N, 2N, (8N up to SN: 263843) (1939-50) Replaces: 9N12100 FDS1141 $38.60 Distributor Breaker Plate Assembly Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12150 FDS1144 $4.65 ABC064 $4.40 FDS310 $111.10 Distributor Breaker Plate Retaining Clip Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 91A12146 4-Piece Distributor Gasket Kit Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12104 USA made Distributor Shaft (Cam & Weight Assy) Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12187 $8.00 Distributor Coil Retainer Wire Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12137 12-volt Distributor Coil Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor HOT" Coil (55000-volts) Fits: Ford models w/ 12-volt system EXCEPT front mount distributor tractors USA made NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor. Distributor Caps, parts 6-volt Distributor Coil Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor Replaces: 9N12024 $29.95 www.SteinerTractor.com Dust Cover Ignition parts Order # Description / Application Coils / Resistor cont... ABC277 ABC119 Fuse Holder............................................................... ABC389.............. $10.95 NOTE: Rated at 20 AMP; Fits in 1/2" hole. 162 $29.95 Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) I. Rear light wire (6 required) Replaces: 9N17668 Fuse holder Description IHS949 Ford: Electrical parts Ignition parts cont... Cigarette lighters ABC062 Rotor Clip Fits: Late 8N SN: 263844 & up, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. gas (thru 1964), 6000 (All w/ side mounted distributor), Replaces: 8N12213 USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $262.50 Side Mount Distributor (NEW not Rebuilt) Fits: 8N SN: 263844 & up (1950-52) Replaces: 8N12127B NOTE: Has external oiler & terminal for coil wire. Original Style Distributor Caps, parts continue on next page 163 Ford: Electrical parts www.SteinerTractor.com Order # Price Description / Application Order # Price FDS476 $12.65 Description / Application Spark Plug Wiring Sets, parts cont... FDS1754 $2.95 Ignition parts cont... Order # Price Description / Application Distributor Caps, parts cont... FDS316 $248.50 Side Mount Distributor (NEW not Rebuilt) w/ Slotted Drive Shaft Fits: NAA, Jubilee Replaces: FAC12127D FDS317 FDS281 $248.50 $4.50 Side Mount Distributor (NEW not Rebuilt) w/ Hex Drive Shaft Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 1964) Replaces: FDN12127A & 311185 NOTE: 1/4" Hex drive Primary Conductor (For side mounted distributors) fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64) Replaces: 8N12209 NOTE: Copper. Spark Plug Wiring Sets, parts FDS149 FDS467 $14.25 $14.95 FDS1756 $5.95 FDS331 164 $14.95 Spark Plug Wiring Set w/ 90° boots Fits: 9N thru 4000 4-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. Spark Plug Wiring Set Fits: 8N w/ side mounted distributor (generator on left side) USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Pre-Assembled - No cutting or fitting required. Spark Plug Wire Grommet Fits: 8N SN: 263844 & up (1950-52) w/ side mounted distributor, Replaces: 7RA12297 (.970" o/a length, .708" hole I.D., .880" center O.D., 1.180" end O.D.) NOTE: Holds 4 plug wires together. Spark Plug Wiring Set Fits: NAA, Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000 4-cyl. series (1953-64) USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Pre-Assembled - No cutting or fitting required. ABC326 $19.85 Spark Plug Wire Rubber Retainer Fits following gas, LP: 8N SN: 263844 & up (1950-52) w/ side mounted distributor (1 used); NAA thru 4000 4-cyl (1953-64) (2 used), Replaces: 7RA12271 (.857" length, .125" thick, .508" hole I.D.) NOTE: Sold individually. On 8N holds #3 & #4 plug wires together (1 used). On NAA & up holds #1 & #2 and #3 & #4 plug wires together (2 used). Spark Plug Wiring Set w/ 90° boots Fits: 6-cyl. models USA made NOTE: Copper core, waterproof neoprene. Cut to length. FDS138 FDS420 $24.90 $28.35 $3.80 Fits: 9N, 2N, 8N w/ front mount distributor (1939-50) $3.45 Fits: 8N w/ side mount distributor, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cylinder series (thru 1964) FDS469 $5.95 FDS471 $5.95 ABC322 specifications: 14 mm thread, 7/16" reach, 13/16" hex, Autolite 216 Plug Gap .025" ABC323 $3.80 Fits: 2000 3-cylinder, 2600, 2610, 3000, 3600, 3610, 4000 3-cylinder, 4600, 4610, 5000 (1965 & up) Order # Price FDS297 $145.95 Ignition Tune-Up Kits $19.95 Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor NOTE: Kit includes: Points, condensor & rotor; Point Gap .015. FDS137 $32.60 Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor NOTE: Kit includes: Points, condensor, rotor, spark plugs & ABC064 4-pc distributor gasket kit; Spark Plug Gap .025, Point Gap .015. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1950-64) w/ side mounted distributor NOTE: Kit contains: Points, condensor rotor & spark plugs; Spark Plug & Point Gap .025. Fits: 2000, 2110, 2600, 2610, 3000, 3600, 3610, 3900, 3910, 3930, 4000, 4110, 4600, 4610 (1965 & up) (All 3-cyl.). Industrials: 3400, 3500, 4400, 4500, 230A, 231, 334, 340, 340A, 420, 445, 515, 531, 535, 540, 540A, 545 w/ original Autolite distributor (All 3-cyl.) NOTE: Kit includes: points, condensor, rotor & spark plugs; Spark Plug & Point Gap .025. Starters, parts cont... Order # Price FDS324 $164.95 Starter w/ Drive (Bendix) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 1811, 2000, 4000 series (1953-64) (All 4 cyl. gas, LP, diesel) Replaces: C3NF11002D, C3NF11001B, C3NF11002E FDS390 $171.75 12-volt Starter (New not Rebuilt) w/ Solenoid & Drive (Bendix) Fits: 231, 335, 340, 445, 531, 540, 550, 555, 2000 3-cyl., 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000 3-cyl., 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, 7710, 8000, 8600, 9000 (All diesel1965 & up) Replaces: D4NN11000BR & D8NN11000CE NOTE: Diesel only, No returns if nose cone is broken. ABC517 $14.45 Starter Tag w/ 2 Rivets Fits: Tractors & Industrial using Autolite starters (2.955" long, .915" wide, .140" dia. rivet holes, 2.650" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. Fits: 9N, 2N, (8N up to SN: 263843) (All w/ front mount distributor) Replaces: B2NN12200A, 9N12200 Fits: 8N SN: 263844 & up, NAA thru 4000 4-cyl. series (1950-64), 6000 (All w/ side mount distributor) Replaces: C0NN12200A, FAB12200A Starters, parts ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, Autolite 405, Plug Gap .020" FDS473 Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1950-64), 6000 w/ side mounted distributor NOTE: Kit includes: Points, condensor & rotor; Point Gap .025. Rotor Buttons ABC172 specifications: 14 mm thread, 7/16" reach, 13/16" hex, Autolite 437, Plug Gap .025" ABC322 www.SteinerTractor.com Ignition Tune-Up Kits cont... Spark Plugs (Autolite) NOTE: Check spark plug specifications before ordering as some models may use more than one type. ABC172 Ford: Electrical parts Ignition parts cont... Ignition parts cont... ABC129 ABC068 $12.75 ABC069 $15.75 FDS282 $20.40 ABC139 $15.90 $28.95 Ratchet Style Starter Drive (Bendix) Assembly Fits: 9N, 2N, 8N (1939-52) Replaces: 52-11350C-PD ABC227 Starter Solenoid Relay Assemblies, parts Description / Application 6-volt Starter (NEW not Rebuilt) w/ Drive (Bendix) Fits: 9N, 2N, 8N Replaces: 8N11001 (starter), 52-11350 (drive) $39.30 Description / Application Ratchet Style Starter Drive (Bendix) Assembly Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 1953-64 (All 4 cyl. gas, LP, diesel) Replaces: C1AF11350A STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Starter Solenoid Relay Assembly (Saddle Mount) (3 Post) Fits: 8N (1947-52) Replaces: 8N11450 NOTE: 6-volt or 12-volt system. Starter Solenoid Relay Assembly (3 Post) Flat Mount Fits: NAA, Jubilee, 600, 700, 800, 900 (195357) w/ 4-cyl. gas engine Replaces: NCA11450A NOTE: 6-volt or 12-volt system. 12-volt Starter Solenoid Relay Assembly (Flat Mount) (4 Post) Fits: 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. series (1958-64) except Lucas equipped & 6000 gas; Activates manifold heater on 6000 diesel, Replaces: 311006, 311007 12-volt Starter Solenoid Relay Assembly (Flat Mount) (4 Post) Fits: 2000, 3000, 4000 gas (1965 & up) w/ 4-1/2" dia. starter, Replaces: D2AF11450AA NOTE: Do not use the "I" terminal if replacing a 3-terminal switch. Starters, parts continue on next page 165 Ford: Electrical parts Starters, parts cont... www.SteinerTractor.com Order # Price Description / Application Order # Price Push Button Switches cont... ABC233 Starters, parts cont... Order # Price $12.50 Description / Application Starter Solenoid Relay Assemblies, parts cont... ABC508 $5.35 ABC506 $5.30 Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals) NOTE: Brass. Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) NOTE: Brass. $8.20 Covers FDS340 FDS341 FDS342 $7.50 $5.95 $11.99 Rubber Cover (For Starter Control Wire Terminal - Goes on wire to solenoid) Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1947-64) Replaces: 8N11115 Rubber Cover (For Starter Push Switch) Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1947-64) Replaces: 8N11113 Rubber Cover (For Battery Cable to Starter Solenoid) Fits: 8N, NAA, Jubilee (1947-54) Replaces: 86H14321A, C0NN14321A, C7NN14321A, S115407 ABC489 $13.95 FDS313 ABC067 166 $16.40 $24.95 $24.95 Manual Starter Switch (Base Mount) (For 7/8" hole) Fits: 9N up to SN: 12499 (1939-40) Replaces: 9N11450A (Dash mount for 1-3/4" mounting hole) NOTE: Will work on 6 or 12 volt. Starter Push Switch Fits: 9N SN: 12500 & up, 2N Replaces: 9N11450B (2-3/4" c.c. bolt holes) NOTE: Restoration quality Starter Push Switch w/ Mounting Gasket Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1947-64) (All w/ standard transmission) Replaces: 8N11500 NOTE: Does not fit Select-O-Speeds. Will work on 6 or 12 volt systems. Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, nonfused. This can be used on battery ignition systems only. Magneto Push / Pull Ignition Switch (O.E.M) Fits: Ford models w/ Magneto Ignition NOTE: One screw type terminal; Out: ON; In: OFF. ABC065 $12.95 Ignition / Key Switch w/ 2 Keys Fits: Ford models (1939-64) Replaces: 8N3679C NOTE: Will not fit Dexta & Fordson Major. ABC400 $14.85 FDS330 FDS400 $14.40 $12.95 $2.95 LUCAS Ignition Key (Fits FDS330 Switch) Fits: 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 650, 750, 2000 thru 7000, 2310 thru 4610, 2600 thru 7700, 3230 thru 4830, 5110 thru 7710, 7100, 7200, 7410, 7600, 7700, 7710, 8000 thru 9700, 7810 thru 8210, 8530 thru 8830 TW5 thru TW35 except Compacts (All 1965 & up) Replaces: E7NN11603AA STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Neutral Safety Starter Switch Fits: 2000 3-cyl. thru TW35; Industrials: 230A thru 755B (1965 & up) Replaces: C5NN7A247C, C7NN7A247A, 81817901 Electrical resistor assys., parts Order # Price FDS263 $19.95 Description / Application Resistor Assembly Fits: 9N, 2N Replaces: A8NN12250B (5/16" machine screw mount OEM style) FDS264 $19.95 FDS397 $12.15 Terminal Junction Block Fits: 8N SN: 263844 & up w/ side mounted distributor, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64), Replaces: 8NNN14448A ABC366 $7.75 Universal 12-volt Voltage Resistor (2-Terminal Style) Fits: Ford models NOTE: Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery. 1.5 OHMs on 6-volt battery to 4.0 OHMs for 12-volt battery. Resistor gets very hot. Ignition / Key Switch w/ 2 Keys Fits: Ag & Light Industrial equipment (3/4" dia. thread) NOTE: Four stud type terminals. Ignition / Key / Switch (For tractors w/out cold start) Fits: 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 650, 750, 2000 thru 7000, 7100, 7200, 7410, 7600, 2600 thru 7700, 7700 & 7710, 8000 thru 9700, TW10, TW20, TW30, 2310 thru 4610, 5110 thru` 7710, 7810 thru 8210, 8530 thru 8830, TW5 thru TW35, 3230 thru 4830 except Compacts (All 1965 & up), Replaces: C5NN11N572A, D5NN11N572A, E8NN11N501AA NOTE: Seven spade terminal. Description / Application www.SteinerTractor.com Ignition / Key Switches cont... FDS1449 Ignition / Key Switches Push Button Switches ABC066 Starter Push Switch, Extra heavy duty momentary push button switch Fits: Ag & Light Industrial equipment (Mounting stem 5/8" - 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. Two screw type terminal. Up to 35 V (DC), rubber cap for dust and moisture protection. Push / Pull Switches ABC398 Ford: Electrical parts Starters, parts cont... Generators, parts cont... Order # Price FDS436 $26.25 ABC072 $29.95 FDS298 Price FDS434 $18.95 Generator Pulley w/ Keyway (For 11/16" belt only) Fits: 8N SN: 263845 & up, NAA, Jubilee Replaces: 8N10130A Resistor Assembly Fits: 8N up to SN: 263843 Replaces: A8NN12250A (3/16" machine screw mount OEM style) Description / Application ABC519 $14.45 Order # Price ABC071 $34.95 ABC073 $28.95 $160.35 $109.95 Generator Tag w/ 2 Rivets Fits: Tractors & Industrial using Autolite generator (2.300" o/a length, .732" wide, .145" dia. Rivet hole, 2" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. Voltage regulators Description / Application 6-volt Voltage Regulator (3-Terminal) w/ Mounting Plate Fits: 8N up to SN: 263843 w/ front mount distributor Replaces: 8N10505B 6-volt Voltage Regulator (3-Terminal) Fits: 8N SN: 263844 & up (1950-52) w/ side-mount distributor Replaces: 8N10505C Generator (NEW not Rebuilt) w/ Pulley Fits: 9N (1940 & up), 2N Replaces: 2N10000 NOTE: Single-terminal. FDS403 Generator Pulley (Threaded) Fits: 9N, 2N Replaces: 9N10130B Generator Cut-Out Assembly Fits: 9N, 2N (1939-47) Replaces: B0NN10505A Generators, parts Order # Description / Application ABC074 Generator (NEW not Rebuilt) w/ Tach Drive w/out Pulley Fits the following 12-volt: 2000, 3000, 3400, 4000, 4400, 4500, 5000, 7000, 8000, 9000 (1965-75) Replaces: C7NN10000C STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $28.95 6-volt Voltage Regulator (3-Terminal) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas (1953-64) Replaces: FAG10505A Voltage regulators continue on next page 167 Ford: Electrical parts Alternator, parts cont... www.SteinerTractor.com Order # Price ABC1426 $19.95 Price Description / Application ABC1164 $32.90 12-volt Voltage Regulator (3-Terminal) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas, diesel (1953-64), Replaces: C0NF10505A FDS435 ABC495 ABC404 Universal Mounting Kit Fits: Ford models except 9N, 2N, 8N NOTE: Used when switching from a generator to an alternator. Does NOT include top adjusting bracket. May have to be drilled or modified for your application. NOTE: Alternators are NEW not rebuilt • To convert ABC529 6-volt to 12-volt system. For negative ground systems. Description / Application ABC535 $145.50 Mini 41 Amp Maximum Alternator w/ Pulley & Diode Fits: Ford models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3-wire internal regulator that requires an excitation circuit. Includes instructions. ABC2315 168 Bolt Kit only (For FDS1084) FDS1097 FDS1099 Alternator Conversion Kit (For negative ground systems) Fits: 8N SN: 263844 & up w/ side mount distributor NOTE: Kit contents: Alternator, bracket kit, internally resisted 12-volt coil, USA made wiring harness & instructions. Must use existing fan belt. $174.95 $23.50 Universal Top Adjusting Bracket Fits: Ford models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models. FDS1103 www.SteinerTractor.com Light switches cont... Order # Price MFS119 $14.95 Work Light Toggle Switch (For Tail Light) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64), Replaces: 21C13740, 8N1374 NOTE: Two spade terminals. FDS351 $14.95 Light Switch (For Headlight or Tail Light) Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1955-64) Replaces: FDN11654A NOTE: Like original. Two screw type terminals. ABC398 $8.20 Universal 2-Position Push / Pull Light Switch Fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, nonfused. JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch Fits: Ag & Light Industrial equipment w/ voltage regulator NOTE: 15 AMP, five terminals, fused, 7/16-20 stem. 10-24 N.C. black plastic knob. $45.00 Alternator Bracket Kit Fits: Late 8N (SN: 263844 & up) w/ side mounted distributor FDS1102 Ford: Electrical parts $4.95 Alternator Conversion Kit (For negative ground systems) Fits: NAA, Jubilee USA made NOTE: Kit contents: Alternator, internally resisted 12-volt coil, USA made wiring harness & instructions. Must use existing alternator belt. $174.95 $45.00 Alternator Bracket Kit Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series thru 1964 FDS1106 Alternator Conversion Kit (For negative ground systems) Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas (thru 64) NOTE: Kit contents: Alternator, bracket kit, belt, internally resisted 12-volt coil, USA made wiring harness & instructions. Must also purchase 12 Volt fuel gauge # FDS276 & 12 Volt light bulbs. $174.95 NOTE: The following alternator conversion kits will update older 6-volt tractors to 12-volt charging system. Does not include 12-v $34.95 $97.85 Description / Application Alternator conversion kits, parts fuel gauge, 12-v sending unit, 60 amp ammeter & 12-v light bulbs, but can be purchased separately. Brackets can also be purchased Order # FDS1084 63 Amp Alternator w/ Pulley Fits: Ford models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery! Must rev engine to 800 - 850 RPM in order for unit to self excite. FDS1089 Price Description / Application $177.95 Alternator Conversion Kit (For negative ground systems) Fits: 9N, 2N, (8N up to SN: 263843) (193951) (All w/ front mount distributors) NOTE: Kit contents: Alternator, USA made bracket kit, belt, resistor, 12-volt coil, USA made wiring harness & instructions. Light switches Alternator Bracket Kit Fits: 9N, 2N, (8N up to SN: 263843) (1939-51) (All w/ front mounted distributor) USA made FDS349 $45.00 Alternator conversion kits, parts continue on next page STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # Price FDS445 $16.10 $14.95 Description / Application Headlights, parts Need light components? See pgs. 342 - 343. Order # Price FDS2691 (6-volt) $48.50 FDS2693 (12-volt) $48.50 FDS192 (6-volt) $49.95 FDS193 (12-volt) $49.95 separately. Alternator Pulley (For ABC535) (0.587" ID, 1.437" o/a length, 3" pulley O.D., 5/8" belt width) USA made ABC418 Price $34.95 Alternator, parts Price FDS1084B Pulley only (For ABC418) (.670" shaft dia., 2-1/2" pulley O.D. 5/8" belt width) 12-volt Voltage Regulator (6 Spade Terminal) Fits: 2000, 3000, 3400, 4000, 4400, 4500, 5000, 7000, 8000, 9000 (1965-75) Replaces: C7NN10505E, D0NN10505A, D0NN10505B Order # $19.95 $29.95 Order # Description / Application Pulley only (For ABC418) (.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width) Voltage regulators cont... Order # Alternator conversion kits, parts cont... Description / Application NEW! Complete Headlight Assembly Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) FDS2691 Replaces: 2N13006C FDS2693 Replaces: 2N13005C (5-3/4" sealed-beam style) Description / Application Fused Light Switch w/ Metal Knob Fits: 9N, 2N, 8N (thru 1949) Replaces: 9N11652 NOTE: Like original. Uses pig tail connectors. Fused Light Switch (For Headlight or Tail Light) fits: Late 8N (1950-52), NAA, Jubilee (1953-54); Early 600, 700, 800, 900 (All up to SN: 10614), Replaces: 8N11654B NOTE: Like original. Two screw type terminals. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Complete Headlight Assembly Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series FDS192 Replaces: 310066 FDS193 Replaces: 310068 (5-3/4") Headlights, parts continue on next page 169 Ford: Electrical parts Headlights, parts cont... www.SteinerTractor.com Order # FDS494 Price $5.95 Headlights, parts cont... Order # Price ABC450 (6 volt) $14.95 ABC443 (12 volt) $14.95 IHS647 FDS256 FDS460 FDS272 FDS098 FDS099 ABC480 170 $34.95 $18.80 $26.80 $10.95 EACH $17.50 $17.50 $8.95 Description / Application Sealed Beam Bulb (For FDS177, FDS192, FDS213, FDS193) ABC450 Replaces: 4019 ABC443 Replaces: 4419 (5.625") NOTE: Original style. ABC359 $10.95 Headlight Ring fits: Some NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700, Replaces: C0NN13045B (5-3/4" O.D. x 1" wide) NOTE: Check width measurement before ordering. Headlight Bracket (Round) Fits: Late 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 4000, 5000, 7000 Series; Will also fit 9N, 2N, Early 8N, but not correct, Replaces: 8N13472 NOTE: LH & RH are the same; Sold individually. RH Headlight Wing Fits: 9N, 2N, Early 8N (1939-49) Replaces: 9N13472 Headlight Wing Fits: 9N, 2N, Early 8N (1939-49) Replaces: 9N13473 Inner Reinforcement Plate (For Headlight Wing) Fits: 9N, 2N, Early 8N (1939-49) Replaces: 9N13102 NOTE: Clear zinc-plated. Description / Application Headlight Reinforcement Washer Fits: Late 8N - 7700 (1950 & up) Replaces: FAA13102A (2-1/4" O.D., 1/2" center hole) 12-volt Bulb (Double contact) w/ Ring Fits: 1300, 1500, 1700, 1900 Replaces: SBA385120010 Order # Price FDS448 $65.05 FDS442 $65.05 Dash lights, parts 12-volt Headlight Assembly Fits: 2600 & up (4-1/2") NOTE: Post is out of back w/ wires thru post. Headlight Ring (For FDS177, FDS213) Fits: Some 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64) Replaces: C0NN13045A (5-3/4" O.D., 3/4" wide) NOTE: Check width measurement before ordering. Tail, work lights, parts cont... Fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57) Replaces: NCA13771A, C3NN14662A Description Order # Price FDS452 $14.95 6-volt Dash Light Assy (For 1-1/8" dia. hole)...... FDS293............... $40.75 12-volt Dash Light Assy (For 1-1/8" dia. hole).... FDS296............... $40.75 6-volt Bulb only (For 1-1/8" dia. hole).................. ABC355.............. $1.45 12-volt Bulb only (For 1-1/8" dia. hole)................ ABC356.............. $0.75 Tail, work lights, parts ABC544 $17.15 Need light components? See pgs. 342 - 343. Order # Price Description / Application FDS172 $42.85 12-volt Tail Light Assembly (Solid Bucket) w/ Bulb Serviceable for 9N, 2N, 8N, NAA, Jubilee, 600, 800 (1939-57), Replaces: 13402, 13466, 13448, 13450, 13560, 30178-S, 9N13404 NOTE: Economy style. FDS173 $41.15 12-volt Tail Light Assembly (License Lamp Window) w/ Bulb Serviceable for 9N, 2N, 8N, NAA, Jubilee, 600, 800 (1939-57), Replaces: 13403, 13448, 13450, 13560, 31788-S NOTE: Economy style. FDS444 $65.05 6-volt Duolamp Tail Light Assembly (License Lamp Window), Glass Lens & Bulb Fits: 9N, 2N, 8N (1939-52) Replaces: 8N13404 NOTE: Powder coat 8N grey. Restoration quality. FDS446 $42.95 6-volt Duolamp Tail Light Assembly (License Lamp Window), Plastic Lens & Bulb Fits: NAA, Jubilee (1953-54) Replaces: FAA13402A NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application 6-volt Duolamp Tail Light Assembly, Plastic Lens & Bulb Fits: 600, 700, 800, 900 series (1954-57) Replaces: NCA13402A NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. 6-volt Duolamp Tail Light Assembly, Plastic Lens & Bulb fits the following tractors: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801, 2000 3 & 4-cyl 2310, 2600, 2610, 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 3 & 4-cyl, 4000SU, 4100, 4110, 4400, 4500, 4600SU, 4610, 6000 (1957 & up), Replaces: 310064, C5NN13403A, D2NN13403A NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. Tail Light Lens fits: Some NAA, 501, 600, 700, 800, 900, 2000, 2600, 2310, 3000, 3600, 3610, 3910, 4000, 4000 SU, 4100, 4200, 4600, 4600 SU, 4610, 5000, 5100, 5200, 5600, 5610, 6000, 6610, 7000, 7100, 7200, 7600, 7610; Industrials: 231, 335, 340, 445, 531, 540, 3400, 3500, 4400, 4500, Replaces: FDV13450A (4" O.D., 3-1/8" c.c. bolt holes) USA made NOTE: Red plastic. 12-volt Fender & Cab Warning Light w/ 2 amber lenses, double contact bulb & black die cast base Serviceable for 2000 3-cyl. thru TW30 (All using round warning light) Replaces: C5NN12N359E, D4NN13N359A, D6NN13N359B, D9NN13N359AA (4" dia.) Ford: Electrical parts www.SteinerTractor.com Tail, work lights, parts cont... Order # Price ABC548 $10.15 ABC546 6-volt Bulb only (For ABC544) FDS320 $125.95 FDS323 $125.95 FDS325 (6-volt) $89.95 FDS327 (12-volt) $89.95 MFS118 $11.95 Light Bulb Retainer (Holder) Springs (For Work Lights) Fits: Ford models NOTE: Sold in a package of 4. FDS171 $9.95 EACH Tail Light Bracket fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series, Replaces: 8N13423 NOTE: Ford grey; Mounts to FDS170. 1 per bracket; Sold individually. RH & LH are the same. FDS170 $47.25 $24.35 12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base Serviceable for Ford models (All using rectangular warning lights) ABC1243 $4.95 12-volt Round Tail Light Assembly w/ License Lamp Window, red lens & black ABS base Serviceable for Ford models (4" dia.; 2 stud mount, 1-7/8" c.c. studs) ABC1439 $3.45 ABC1439 $3.45 6-volt Bulb only (For ABC544) Description / Application Amber Lens only (For ABC546) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 6-volt Work Light Assembly w/ Frosted Glass Lens & On / Off Switch Fits: 9N, 2N, 8N (1947-51) Replaces: 8N15500E (4-1/2" O.D.) NOTE: Restoration quality. 6-volt Work Light Assembly w/ Dimpled Glass Lens & On / Off Switch Fits: 8N, NAA, Jubilee, 600, 700, 800, 900 (1951-57) Replaces: 8N15500L (4-1/2" O.D.) NOTE: Restoration quality Work Light Assembly w/ Sealed Beam Lens & On / Off Switch Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64), Replaces: 8N15500 (5-1/4" O.D. housing) NOTE: Uses 4-1/2" O.D. sealed beam bulb. For replacement bulb use ABC352 6-volt, ABC353 12-volt). Restoration quality Fender Light Brackets, Pair Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N13470, 9N13471 NOTE: Ford grey. Sold as pair. 171 Ford: Chassis parts www.SteinerTractor.com Order # FDS235 Price $74.95 Emblems - Licensed by Ford NOTE: Emblems include clips / screws. Order # FDS010 FDS009 FDS009B FDS011 FDS012 FDS013 FDS014 FDS312 172 Price $20.50 $17.50 $32.50 $46.50 $46.50 $46.50 $46.50 $46.50 Description / Application 2-Piece Hood Emblem (Economy) Fits: 9N, 2N Replaces: 9N16600 (Oval piece: 3-1/4" W x 1-7/8" H Rectangle piece: 2-1/2" W x 1" H) NOTE: Painted, pot metal. Hood Emblem (Economy) Fits: 8N Replaces: 8N16600B (4-5/8" W x 2" H) NOTE: Painted, pot metal. FDS307 FDS2475 $76.00 $88.75 Hood Emblem Fits: 8N, Replaces: 8N16600B (4-5/8" W x 2" H) NOTE: Die cast, chrome w/ red background. Beautiful! Hood Emblem Fits: Jubilee, Golden Jubilee (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a bakedon painted finish in original colors! Hood Emblem Fits: NAA (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a bakedon painted finish in original colors! Hood Emblem Fits: 600, 620, 630, 640, 650, 660 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a bakedon painted finish in original colors! FDS2477 Hood Emblem Fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62) Replaces: 311232 (Measures 5-7/8" across) USA made NOTE: Metal backed. NEW! Hood Emblem Fits the following w/ cast iron front nose: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4030, 4040, 4130, 4140 4-cyl. industrial (1958 - 62) Replaces: C0NN16600E, C0NN16600F, 312718 (5-7/8" O.D.) USA made NOTE: Metal backed. $6.50 NEW! Hood Emblem Bracket Fits the following w/ cast iron front nose: 1801, 1811, 1821, 1841, 1871, 1881, 4040, 4140 4-cyl. (1958 - 64) Replaces: 312741 (6" o/a length, 1-1/4" wide) FDS409 IHS543 ABC374 Order # Emblem Push Clip (For Ford emblems) (Center hole dia. = 0.180" & will expand to 0.300") NOTE: Push Clips are included w/ the listed emblems. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price Price FDS204 $395.00 FDS198 $98.50 Starter Hand Crank w/ Pin..................................... IHS401................$28.50 & w/out Spinner USA made Front bumper, part FDS031 Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000, 3000, (4000 SU w/ I-Beam Axle) Replaces: 33806S34, 351505S8, 354369S8 Description Order # Price Front Bumper (4 Bar)............................................... FDS031............... $114.95 NOTE: IMPROVED W/ CORRECT FIT! Heavy duty, red oxide primer. USA made FDS091 $235.50 FDS1090 $189.95 Bumper Bolt Kit....................................................... FDS478............... $13.75 NOTE: 5/8" x 18" x 4", Grade 8. Zinc plated. Front grilles, parts Order # Price FDS006 $67.50 Description / Application Economy Front Grille Fits: 9N, 2N, 8N Replaces: 8N8204 Not like original NOTE: For best results fit to tractor before painting. FDS205 $395.00 Front Grille Fits: Late 9N, 2N (Late 1941-47) Replaces: 9N8206D (Tear drop shaped bars) USA made NOTE: Restoration quality. Made from original tooling. Front Grille Fits: 8N (1947-52) Replaces: 8N8204 (Tear drop shaped bars) USA made NOTE: Powder coat. Restoration quality. Made from original tooling. Front Grille w/ Rubber Bumpers & Hardware Fits: Jubilee, NAA, 600, 800, Early 2000 series (1953-62), Replaces: NCA8200A USA made NOTE: Steel. E-coated black. Hand crank hole is round. Restoration quality. Economy Front Grille Fits: Jubilee, NAA, 600, 800, Early 2000 series (1953-62), Replaces: NCA8200A NOTE: Steel; primed gray. Hand crank hole is elongated. FDS345 $4.00 $278.50 Front Grille (For Steel Hood) Fits: Early 9N up to SN: 50000 Replaces: 9N8206B (Cast aluminum grille w/ horizontal bars) USA made Description / Application Front Grille Fits: 8N (1947-52) NOTE: Original style. Bare steel. Round bars. FDS478 $66.95 $0.25 Front grilles, parts cont... Starter Hand Crank w/ Pin..................................... IHS543................$42.15 & w/ Spinner USA made FDS202 Front Grille Emblem Fits: 6000; Serviceable for 6000 Commander Replaces: CONN16600A; Serviceable for C5NN3A515A (10 x 32 thread, 2.475" tall, 3.675" length of widest point) USA made www.SteinerTractor.com Order # Description Hood Emblem Fits: Fordson Major; Dexta up to SN: 916550 when using oval emblem Replaces: E1ADKN8212C NOTE: Metal. FDS1894 Serviceable for 9N, 2N, 8N (All w/out bumpers) Replaces: 9N17040, 2N17040A (13-1/4" to first bend, 5/8" dia.) IHS401 $35.75 Hood Emblem Fits: 800, 820, 840, 850, 860 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a bakedon painted finish in original colors! Hood Emblem Fits: 900, 950, 960 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a bakedon painted finish in original colors! Description / Application Hood Emblem Fits: 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771 (1958-62) Replaces: 311231 (5-1/2" across) USA made NOTE: Metal backed. Ford: Chassis parts Starter hand cranks Emblems - Licensed by Ford cont... FDS091H $7.75 FDS347 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $6.95 4-Piece Grill Bumper Kit Fits: Jubilee, NAA, 501, 600, 700, 800, 900, Early 2000 series (1953-62) Replaces: NAA88227B Grille Mounting Stud Fits: NAA, Jubilee (1953-54) Replaces: NAA88219A (1/4" - 20) NOTE: 2 used per tractor; Sold individually. Grille Mounting Stud Fits: 600, 700, 800, 900 (1954-62) Replaces: NAA88219B (5/16" - 18) NOTE: 2 used per tractor; Sold individually. Front grilles, parts continue on next page 173 Ford: Chassis parts Front grilles, parts cont... www.SteinerTractor.com Order # FDS360 Price $6.10 Front grilles, parts cont... Order # FDS356 FDS352 Price $334.45 Description / Application Upper Grille Assembly Fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4030, 4031 (1958-62) Replaces: 310984 (outer shell), 310982 (inner screen), 311591 (grille mounting stud) $59.95 $177.85 Outer Shell only Fits: Same as FDS356 Replaces: 310984 FDS354 FDS059 FDS311 $3.75 EACH $193.95 FDS348 FDS190 FDS357 $7.50 $158.50 Grille Mounting Stud Fits: 801, 901, 2000 4-cyl., 4000 4-cyl. series (1958-62), Replaces: 311591, D4NN8N213A (5/16" - 18 UNC) NOTE: 4 used per grille; Sold individually. Bottom Grille Section Fits: 801, 811, 821, 841, 851, 861, 871, 881, 4000, 4030, 4031 4-cyl. (1958-62) Replaces: 310032 USA made NOTE: Metal; E-coated black. $131.95 2-Piece Front Grille (Upper & Lower) Fits: 2000, 3000, 4000, 5000 (All 1965 to March 1968) Replaces: C5NN8A163A, C5NN8202AA NOTE: Metal FDS358 FDS359 $27.50 Top Grille Section w/ Red "Ford" Letters Fits: 2000, 3000, 4000, 5000, 7000 (All April 1968 & up), Replaces: C9NN8A163AG NOTE: Grey plastic. Replaces the metal grille used April 1968 thru January 1971 & the plastic grille used February 1971 & up. $32.50 Bottom Grille Section w/out Headlight Holes Fits: Same as FDS358 Replaces: D1NN8151A NOTE: Grey / blue plastic. 174 Description / Application Order # Push-In Stud & Knob (For FDS359 Bottom Grille) Fits: 2000, 3000, 4000, 5000, 7000 (All April 1968 & up), Replaces: C9NN8B151B, 9828014 NOTE: 2 used per bottom grille; Sold individually. ABC2277 1-Piece Front Grille Screen Assembly w/ Plastic Outer Frame & Steel Screen Fits: 2600, 3600, 4100, 4600, 4600SU, 5600, 6600, 7600; Will also fit 2000, 3000, 4000 if using 1-piece style grille housing Replaces: D5NN8200A (18-3/8" top width, 17-1/2" bottom width, 23-3/4" tall) ABC2257 FDS382 Price $2.95 $5.99 $7.20 Front Grille Screen Fastening Spring To secure bug screen to Ford grilles NOTE: 4 required. Sold individually. FDS385 Inner Screen only Fits: Same as FDS356 Replaces: 310982 $7.20 Nosecone Fits: NAA, Jubilee, 501, 600, 700, 800, 900 (1953-62) Replaces: NCA16613A Description Order # FDS344 $59.95 FDS125 (RH) $103.95 Price Nosecone (Hood Front Top)...................................FDS127...............$103.15 NOTE: Not restoration quality. For best results fit to tractor before painting. Hood, parts Order # FDS069 FDS083 (RH) FDS084 (LH) Price $326.00 Description / Application Hood w/ Battery Door & Hinge, Latch Kit, Knob (w/out Dog Legs) Fits: 8N, Replaces: 8N16612, 9N16938C NOTE: Not restoration quality. Does not have Ford script. Will fit Ford 9N & 2N but models did not originally have side air cleaner openings. For best results fit to tractor before painting FDS130 (LH) FDS1759 Side Panel (Dog Leg) Fits: 2N, 8N FDS083 Replaces: 8N16618A FDS084 Replaces: 8N16619A STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Upper Side Panel (Hood Dog Leg) Bolt Kit Fits: 2N, 8N, 9N Replaces: 20311S7 (bolt), 34806S (lock), 33798S (nut) NOTE: Includes 4 fine thread bolts, nuts, lock washers. Hood Side Panel (Hood Dog Leg) to Axle Support Bolt Kit Fits: 2N, 8N, 9N (All using single bolt dog legs), Replaces: 350782S8 (7/16" - 20 NF bolts) NOTE: Includes 2 bolts, flat & lock washers, square nuts. 4-Piece Hood Bolt Kit Fits: 8N, Replaces: 355494S (3/8" x 24) NOTE: Secures hood to dash using (4) bolts. Can also be used to bolt air cleaner to battery tray using (2) bolts. 6-Piece Hood Dash Screw Kit Fits: NAA, Jubilee, Golden Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. (195364), Replaces: 354425S (5/16" x 24 Phillips head) USA made NOTE: Secures rear of hood to dash panel using (6) screws. Hood Ornament Fits: 2000, 2030, 2031, 2110, 2111, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 (All 4-cyl.) (1962-64) Replaces: C3NN16B748A NOTE: Metal; chrome plated. Front Side Panel Dog $103.95 Fits: NAA, Jubilee, 600, 800, Early 2000 4-cyl. series (1953-62) FDS125 Replaces: NCA16652A FDS126 Replaces: NCA16653A NOTE: RH & LH sold separately. $5.95 $79.95 $79.95 Ford: Chassis parts Hood, parts cont... FDS144 $38.95 FDS380 $8.80 Radiator to Hood Side Panel Bumper Fits: NAA thru 4000 4-cyl. (1953-64) Replaces: NAA88131B (2.026" o/a length, 1.035" thick, 1.285" wide) NOTE: 2 used per tractor; Sold individually. Must be glued to panels. www.SteinerTractor.com Hood, parts cont... Order # Price FDS279 $23.15 FDS008 $15.00 FDS007 $15.00 FDS085 $14.50 Description / Application Battery Door Hinge Fits: 9N w/ steel hood, 2N, 8N Replaces: 9N16689 USA made Chrome Battery Door Handle w/ Stud, Nut & Latch Fits: 9N, 2N, 8N Replaces: 9N16625 Air Cleaner Grille Door w/ Thumb Screw Fits: 8N, Replaces: 8N9661 NOTE: Fits outside right rear hood. Will also fit Ford 9N & 2N if they are converted to an 8N hood.. Air Cleaner Funnel Assembly Fits: 8N Replaces: 8N9684 FDS075 $22.95 FDS075S $5.00 Air Cleaner Grille Door w/ Screen & Thumb Screw Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) Replaces: NAA9661B (door), NAA9669A (screen) Screen Only (For FDS075) FDS377 $2.75 Center Door Rubber Bumper Fits: NAA, Jubilee, 600, 700, 800, 900, 2000 4-cyl, 4000 4-cyl; Fits: LPG: 501, 601, 701, 901 (1953-1964), Replaces: 354177S NOTE: 4 to 6 required per tractor; Sold individually. FDS491 $1.00 Hood / Grille Rubber Bumper Fits: 2000 & up, 1965 & up Replaces: C5NN16N655A (.990" o/a length, .500" head dia.) NOTE: 20 required per tractor; Sold individually. FDS440 $14.85 Hood Latch Spring Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (1953-64) except LP, Replaces: NAA16925B NOTE: 2 required per tractor; Sold individually. Battery Door w/ Latch & Hinge Assembly Fits: 9N w/ steel hood, 2N, 8N Replaces: 9N16938C Set of (4) Rubber Bumpers Fits: 9N w/ steel hood, 2N, 8N Replaces: 11A-16758A STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 175 Ford: Chassis parts Air cleaner assembly, parts cont... www.SteinerTractor.com Order # FDS033 Price $9.95 FDS210 FDS382 IHS390 ABC422 Price $129.95 $7.20 $25.50 $12.95 Description / Application Air Cleaner Assembly w/ Clip Assy., Gasket & Clip-Held Cap Fits: NAA, Jubilee, 600 (1953-57) Replaces: EAE9600D & 312917 (7-1/4" c.c. bolt pattern) 4-Piece Bolt Kit Fits: 8N, Replaces: 355494S (3/8" x 24) NOTE: Bolts air cleaner to battery tray (only 2 bolts are required). Air Cleaner Cap Fits: 9N, 2N w/ vertical air intake thru hood (A = 4-1/4" body dia.) (1-3/4" I.D.) NOTE: Fits outside of pipe Air Cleaner Oil Bath Filter Element Fits: Ford models (3" wide x 78" long) NOTE: Replaces: the mesh in existing air cleaners. Sold by the bag (Normal utility air cleaners will use 2 bags). FDS081 FDS186 $22.90 Air Cleaner Oil Cup (Clip-Held) Fits: Some 8N, NAA, Jubilee, 600, 700, 800, 900 (thru 57), Replaces: 8N9658 (5" O.D. at lip, 3-1/8" high) NOTE: Check measurement before ordering. Air Cleaner Cup Clamp Fits: 9N, 2N, 501, 600, 700, 800, 900 Replaces: 311508 JDS540 JDS541 FDS019 $27.50 $12.15 $18.95 FDS191 $6.50 Air Cleaner Gasket Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900 (thru 62), Replaces: 9N9623B USA made Clamp-Held FDS034 176 FDS309 $29.95 $4.95 Air Cleaner Spring Clip Fits: 8N, NAA, Jubilee, 600, 700, 800, 900 (thru 57), Replaces: 9N9678 $14.95 Air Cleaner Oil Cup (Clamp-Held) Fits: Some 9N, 2N, 501, 600, 700, 800, 900 Replaces: 311507 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) NOTE: Check measurement before ordering. Price FDS260 $4.00 EACH $10.30 Clip-Held FDS185 Order # Air Cleaner Inner Oil Cup Fits: Some 9N, 2N, 501, 600, 700, 800, 900 Replaces: 311506 Air cleaner assembly, parts Order # Description / Application Air cleaner assembly, parts cont... FDS1481 Air Cleaner Oil Cup Fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62 w/ 172 c.i. gas), Replaces: 311510 (5-3/8" I.D.) Air Cleaner Oil Cup Clamp Fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62 w/ 172 c.i. gas), Replaces: 311511 Air Cleaner Tube Fits: 9N, 2N, 8N Replaces: 9N18215C (1-11/16" O.D.) NOTE: Chrome plated. FDS258 ABC1765 $4.65 EACH $3.60 EACH $15.95 Order # Price FDS361 $19.95 $29.95 $29.95 Air Cleaner Tube Fits following w/ 172 gas, LP: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, (4000 4-cyl.), 4030, 4040, 4121, 4130, 4131, 4140 (1958 & up) Replaces: 311092, 86531351 (2" O.D.) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Air Cleaner Hose Fits: 9N, 2N, 8N, F40, NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 741, 771 & some 800, 900 series gas (1939-57), Replaces: 9N9652 (1-1/2" I.D., 2-7/16" long) NOTE: 2 required per tractor; Sold individually. Air Cleaner Hose Fits: 801, 901 (1957-64); 1801, 2000, 4000 4-cyl. series gas, Replaces: 311107 (2" I.D., 2-1/4" long) NOTE: 2 required per tractor; Sold individually. Clamp (Air cleaner to carb pipe) (For 1-3/4" to 2" O.D. Air Cleaner Hose) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, some 800, 900 series (1939-57) Replaces: 9N9653 NOTE: 4 required per tractor; Sold individually. Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) Fits: 2310 thru TW20 and Industrials using 3" unloader valve, Replaces: D2NN9C673B, F0NN9C673AA, 81870839 www.SteinerTractor.com Pre-cleaner caps, parts cont... Order # Price ABC383 $74.95 ABC512 $74.95 FDS362 ABC1824 $19.95 $49.95 Description / Application Pre-Cleaner Cap Fits 801 thru 981 gas (1958-62) & the following gas w/ dry type air cleaner (1965 & up): Some 2000, 3000, 4000 series, 2600, 3600, 4600, 231, 335, 515, 531, 532; Fits the following diesels w/ oil bath application: Some 2000, 3000, 4000 series, 231, 233 w/ 2" Intake, Replaces: C5NN9A660B (6-1/2" o/a height) NOTE: Metal; powder coat black. Check intake pipe size before ordering. Pre-Cleaner Cap Fits: Some 445, 4000, 4400, 4500, 4600, 5000, 5100, 5200, 5600, 6600, 7000, 7100, 7200, 7600 w/ 2-1/4" Intake, Replaces: C5NN9A660A (6-3/4" o/a height) NOTE: Metal; powder coat black. Description / Application Pre-Cleaner Cap Assembly Fits: Ford models w/ 2-1/4" I.D. base & 7" bowl Replaces: 86620243 USA made Pre-Cleaner Cap Assembly Fits: Ford models w/ 2-1/2" I.D. base & 7" bowl USA made ABC470 $39.95 Pre-Cleaner Cap Assembly Fits: Ford models w/ 3" I.D. base & 7" bowl (3" I.D. base) ABC510 $64.60 Pre-Cleaner Cap Assembly Fits: Ford models w/ 4" I.D. base & 10-1/2" bowl Pre-cleaner caps, parts Air Cleaner Tube Fits: NAA, NAB, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 gas, LP (1953 & up) Replaces: EAE9620B (1-5/8" O.D.) NEW! Air Cleaner Tube Fits: 700, 701, 740, 741, 771, 800, 820, 840, 850, 860, 900, 950, 960 gas (1955 & up) Replaces: EAF9621B, 311112 (1-5/8" O.D. pipe) FDS1540 FDS261 Description / Application Ford: Chassis parts ABC554 $39.95 ABC484 $24.95 Pre-Cleaner Cover w/ Brass Knurled Nut Fits: Some 501, 601, 701, 801, 901, 1801, 2000, 3000, 4000 series gas, diesel, 4400, 5000 gas (All w/ 5-1/2" bowl) Replaces: B9NN9A660A, B9NN9A664A, 73223 (5-7/16" I.D.) USA made NOTE: Aluminum. Pre-Cleaner (5-1/2" dia.) Fits: 501, 601, 701, 801, 901, 1801, 2000, 3000, 3400, 4000, 4400 gas, diesel, 5000 gas Replaces: B9NN9A663A NOTE: Check measurements before ordering. Clear plastic. ABC484 dimensions: Bowl O.D. at top = 5-1/2"; Bowl O.D. at bottom = 5"; Cone I.D. at top=2-7/16"; bowl side height=2-7/16"; overall height=3-9/16" JDS559 Pre-Cleaner Cap Assembly Fits: Some 801 thru 1881 series, 2000 thru 6000 series w/ 2" I.D. base & 5-1/2" bowl dia. Replaces: B9NN9A660A, 86555327 USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $24.95 Pre-Cleaner Cover w/ Brass Nut (For 7" bowl) Fits: Some 2610 - 6810 Replaces: 73534 (7" dia.) NOTE: Metal. Pre-cleaner caps, parts continue on next page 177 Ford: Chassis parts Fuel caps, parts www.SteinerTractor.com Order # Price FDS167 $8.95 Pre-cleaner caps, parts cont... Order # Price ABC338 $13.95 Description / Application Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet Fits: Some 2610 thru 6810 Replaces: C0NN9A663A, 80073533, 73533, Donaldson PO20227 NOTE: Clear plastic. MHS043 Underside view ABC338 dimensions: Bowl O.D. at top - 7"; Cone I.D. at top - 3-1/2"; Bowl side height - 3"; Overall height - 4-1/8" ABC339 $16.95 $9.95 Description / Application Fuel Cap (Non-Vented) w/ Gasket Fits: 9N, 2N, 8N, Replaces: 9N9030 NOTE: Original appearance Fuel Cap (Vented) w/ MHS043GK Gasket Fits: 9N thru TW35 (1939-90) Replaces: C5NN9030B, E7NN9030AA (2-7/8" O.D.) Price Description / Application ABC040 $29.95 Sediment Bowl Assembly w/ 3/8" Bolt Hole Fits: 501, 601, 701, 2000 4-cyl. (1958-64) (All w/ 134 c.i. engines); 801, 901, 1801 (1958-60) (All w/ 172 c.i. gas engine up to SN: 126524), Replaces: 311272 NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. 3/8" ABC106 $32.55 7/16" Gasket only (For MHS043) (2.622" O.D., 1.500" I.D., 0.100" thick) NOTE: Rubberized cork gasket. ABC339 dimensions: Bowl O.D. at top - 10-1/2"; Cone I.D. at top 5-9/16"; Bowl side height - 3"; Overall height - 4" Price Sediment Bowl Assembly w/ 7/16" Bolt Hole Fits: 801, 901, 1801, 4000 series, 6000 gas (1960-64) (All w/ gas engine SN: 126525 & up) Replaces: C0NN9155A, 9285A NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. ABC294 Description / Application ABC346 FDS1780 Order # FDS176 Price Sediment Bowl Assembly Fits: 9N, 2N, 8N, NAA, Jubilee Replaces: 2N9155B, NAA9155B (3/8" pipe inlet, 1/4" tube outlet) Description / Application $175.00 Fuel Tank (Steel) Fits: 9N, 2N, 8N Replaces: 9N9002 FDS178 ABC127 FDS483 178 FDS2616 $35.75 $14.85 ABC123 ABC039 ABC319 ABC563 Bowl Assy: Price ABC123 $2.90 ABC039 $0.98 Fuel Shut Off Valve fits: Fordson Major diesel series, Following 1965 - 96 gas, diesel 2000 3-cyl. thru 7810; Industrials: 3400 thru 755B Replaces: E1AD0N9189B, E2NN 9N200A, E2NN9N024AA, E0NN9N024AA, 83935915 (1/2" pipe inlet, 5/16" tube outlet) NOTE: Metal w/ brass valve & plastic filter screen. Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. $8.50 FDS485 $18.95 Description / Application Fuel Tank Screen Fits: Most Ford models w/ stem style sediment bowl.Will fit ABC092, ABC281, IHS713, IHS1577 sediment bowl assemblies (.375" screen O.D., .216" pipe O.D., 2.530" o/a length) USA made NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl stem out. FDS1603 $4.95 FDS487 $29.95 FDS1544 $24.95 Fuel Line Fits following gas only w/ 134 C.I. engine 1954-64: 600 series, 601 series, 700, 740, 2000 (4 cyl.), 2111, 2030, 2031, 2120, 2130, 2131 Replaces: NCA9282B FDS1549 $48.95 Fuel Line Fits: Some 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881. 172 C.I. Gas engine (SN: 11977 - 126524), Replaces: 310918 (1/4" line and 15-1/2" long) ABC1423 $29.95 Diesel Single Fuel Filter Assembly w/ Glass Bowl fits: 2000 3-cyl. thru 7700 Industrials: 230A thru 755A, Replaces: C5NE9165C, C7NN9162B, D9NN9165BA, 83937061 (4) 1/2" x 20 UNF ports) NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. ABC1421 $5.25 Fuel Filter Element w/ Seals (For Cav/ EACH Sediment Bowl Assys: The following parts (Sold separately) will fit ABC038 Sediment Order # ABC1315 The following parts (Sold separately) will fit ABC040, ABC106 Order # Price ABC294 $1.05 Gasket, Replaces: 311275 (1-9/16" O.D.) USA made ABC346 $4.40 Filter Screen & Gasket Set FDS1780 $1.49 Fuel Filter Valve Stem to Carb Body Gasket (For ABC040), Replaces: NCA99180B NOTE: 2 used per tractor; Sold individually. FDS1785 $1.89 Fuel Filter Valve Stem to Carb Body Gasket (For ABC106), Replaces: NCA99180A (0.443" I.D. x 0.600" O.D. x 0.047" thick) NOTE: 2 used per tractor; Sold individually. FDS2616 $16.50 NEW! Sediment Bowl Retaining Bolt (3/8") (For ABC040), Replaces: 86531362 USA made FDS2620 $24.50 NEW! Sediment Bowl Retaining Bolt (7/16") (For ABC106), Replaces: C0NN9A349B USA made ABC038 components Fuel Shut Off Valve w/ O-Ring at Fuel Tank Fits: 501, 600, 601, 700, 701, 2000 4-cyl. gas, diesel (1954-64); 800, 801, 900, 901 up to SN: 126524 w/ 1/4" fuel line gas, diesel (1954-60); 1801, 4000 Both 4-cyl. diesel (1958-64) Replaces: 311292 NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. Price FDS2620 ABC040 / ABC106 components $199.99 Fuel Tank (Steel) Fits: NAA, Jubilee; Will also fit 600, 800 series gas only (1953-57) Replaces: NAA9002E NOTE: Will not work for tractors w/ fuel sending units; Depending on application, tank may be smaller capacity than original. Order # FDS1785 ABC038 $20.75 Fuel tanks, parts Fuel lines, filters cont... Fuel Line Assembly Fits: 9N, 2N, 8N (1939-52) Replaces: 9N9282A Sediment bowl assemblies, parts Order # www.SteinerTractor.com Order # MHS043GK $1.75 Pre-Cleaner Bowl (10-1/2" dia.) For 3" to 4" inlet Fits: Ford models Replaces: C9NN9A663A NOTE: Clear plastic. Ford: Chassis parts Sediment bowl assemblies, parts cont... Description Glass Bowl, Replaces: 9N9162 (2" O.D., 1.280" L) Gasket, Replaces: NAA9160A (2" O.D.) USA made ABC319 $6.20 Screen (Square Hole) (Pack of 5) ABC563 $4.95 Bail Assembly w/ Nut, Replaces: 2N9166 FROM OUR CUSTOMERS! I received the carburetor on Thursday I set it up according to the manual and put it on the tractor Saturday morning. I turned the key and the gas on, hit the starter and the old 1949 8N started right up and runs like new.- Ron D. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description Fuel lines, filters Order # Price ABC490 $6.45 Description / Application In Line Fuel Filter w/ Hose & Clamps Fits: Ford models using 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Rubber Bumper Anti-Rattler fits: 9N, 2N, 8N (1939-52), Replaces: 9N9121A, 9N9121 (0.985" O.D., 0.500" tall) NOTE: Rubber finish. Fits between fuel line & tank. Fuel Line Assembly Fits: NAA, Jubilee (1953-54) Replaces: NCA9282C Simms fuel filters) fits: 2000 3-cyl. thru 9600 (All w/ 2.85" tall element), Replaces: 83937061, D8NN9N074AA, Cav # 7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall) NOTE: Sold individually. 179 Ford: Chassis parts Throttle parts cont... www.SteinerTractor.com Order # Price FDS451 $19.95 Throttle parts Order # Price FDS378 $32.95 Description / Application Quadrant Throttle Plate Fits: 9N, 2N (1939-47) Replaces: 9N9820 FDS151 FDS411 FDS413 FDS1610 FDS332 FDS155 FDS265 FDS156 FDS158 180 $12.00 $2.95 $46.45 $14.95 $2.95 $14.95 $20.60 $18.90 $27.45 Quadrant Throttle Plate Fits: 8N Replaces: 8N9889A 3-Piece Screw Kit (For Quadrant Throttle Plate) Fits: 8N Replaces: 28319S7 (10 - 24 x 3/8") Lever (For Throttle) Fits: 8N Replaces: 8N9805 FDS2007 $14.95 FDS259 FDS087 Price $146.95 $36.95 Throttle Bellcrank Friction Disc Spring Washer fits: NAA, 501, 600, 700, 800, 900, 2000, 4000 4-cyl. gas, LP (1953 - 64) Replaces: NAA99778B Throttle Rod Grommet Fits: NAA, Jubilee, 501, 600, 700, 800, 900; 2000, 3000, 4000, 5000 thru 7910 Replaces: 353873S ABC496 $19.95 Throttle Control Linkage Fits: 9N, 2N (1939-47) Replaces: 9N9810 (2-1/2") Throttle Control Linkage (Throttle shaft to governor) Fits: 9N, 2N (1939-47) Replaces: 9N9815 (10-1/4") Throttle Control Linkage (Governor to carburetor control) Fits: 9N, 2N, 8N (1939-52) Replaces: 9N9818A (7") Throttle Control Linkage (Throttle to governor control) Fits: 8N (1947-52) Replaces: 8N9815 (23-3/8") Description / Application Throttle Control Rod Fits: NAA thru 4000 4-cyl. gas (1953-1964) Replaces: NAA9815F (4-1/8" o/a length) Throttle Control Rod (Governor to Carburetor) Fits: Jubilee - 4000 4-cyl. series gas, LP (1953-64), Replaces: EAF9818C, 86552618 NOTE: Clevis is not included. Order # Price FDS1265 $58.50 FDS1268 ABC2501 ABC1895 $19.85 $5.95 Clutch Disc Fits: 9N, 2N, 8N, 600, 700, 800, 900 up to SN: 14257 (1939-57) Replaces: 91A7550, NAA7550A (9", 10 splines, spring loaded) Clutch Throw-Out Bearing Fits the following w/ 4 speed single clutch: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64); Fits the following made 10/1969 - 75 w/11" single clutch: 2000 3-cyl 2110, 2310, 2600, 2610, 3000, 3400, 3500, 3550, 3600, 3610 & 231; Fits the following made 10/1969 9/1971 w/11" 3 lever pressure plate & w/out PTO: 4000 3-cyl., 4110, 4440, 4500 Replaces: C0NN7580A NEW! Clutch Throw Out Bearing Fits the following w/ dual clutch: 660 thru 961, Dexta & the following w/ single or dual clutch: 2000, 3000, 4000, 5000 thru TW35 Replaces: 86534551 (2.490" I.D., 4.060" O.D., 0.870" wide) NOTE: Sealed bearing, no need to grease. Clutch Release Bearing Spring Fits the following w/ 3 or 4 speed transmission: 9N, 2N, 8N, NAA, Golden Jubilee, 501, 600, 700, 800, 900, (2000 4-cyl series), (4000 4-cyl series) (1939-64) Replaces: 9N7562 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Throw Out Bearing Carrier Fits the following w/ double clutch & 5 speed transmission SN: 14256 & up: 660, 661, 860, 861, 960, 961, 2000, 4000 4-cyl. series (1955-64) (All w/ live PTO) Replaces: 311260, 86539876 (2.110" I.D.) Input Shaft Retainer Fits the following w/ double clutch & 5 speed transmission SN: 14256 & up: 660, 661, 860, 861, 960, 961, 2000, 4000 4-cyl series thru 1964 (All w/ live PTO), Replaces: 311261 (2.105" tube O.D., 5.120" o/a length) Description / Application Clutch Kit Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 up to SN: 14257 (1939-57) (All w/ 4 speed) (9", 10 splines) NOTE: Kit includes new pressure plate, clutch disc, throwout bearing, pilot bearing & alignment tool. Does not include pilot bushing for NAA, Jubilee. Description / Application FDS415 FDS1133 FDS493 ABC412 www.SteinerTractor.com Transmission parts Order # Price FDS1229 $48.95 FDS1232 $48.95 FDS328 $8.95 ABC291 $1.00 $125.00 Clutch kits, parts Order # Ford: Chassis parts Clutch kits, parts cont... $179.95 $479.85 $99.95 Clutch Kit fits the following w/ 10" 15 spline single clutch: 501, 601, 701, 901, 2000 4-cyl., 4000 4-cyl. series (1958-64) Replaces: NDA7550B, NDA7563 (10", 15 spline, 1" dia. spline) NOTE: Kit includes new pressure plate, clutch disc, throwout bearing, pilot bearing & alignment tool. Dual Clutch Kit fits: Dexta, Super Dexta, 660, 661, 860, 861, 960, 961, 2000 4-cyl., 4000 4-cyl series (All w/ 5 speed transmission live PTO) (1955-64), Replaces: 311435 (9" dia. dual clutch, 1-7/8" x 29 PTO spline & 1" x 15 transmission spline) NOTE: Kit includes new dual clutch assembly (no core needed), pilot bearing & throw out bearing. Clutch Torque Limiter Disc Fits: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121, 6000 (1961 & up) (All w/ Select-oSpeed transmission - 1959-64) Replaces: 313875, 313966, C0NN7A539B, C3NN7A539A, E8NN7A539A (7-1/4" O.D., 20 spline, 1.080" spline I.D.) Select-o-Speed Control Selector Lever Fits the following w/ Select-o-Speed transmission: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121 (1959 & up) Replaces: C0NN7202B Select-o-Speed Control Selector Cover Fits the following w/ Select-o-Speed transmission: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121 (1959 & up) Replaces: C5NN7N013A, 313936 NOTE: Fits left or right side. Transmission Drain Plug w/ Gasket Fits: 9N, 2N, 8N, NAA, Jubilee (Also Fits as an Oil Fill Plug on NAA - 4000 4-cyl., 4 speed, 1939-64), Replaces: 9N7010 (2-1/2" O.D., 2"-12 UN thread) Pump Base Drain Plug / Transmission Filler Plug Gasket (For FDS328) Replaces: 8N7011 USA made FDS418 $12.50 ABC387 $7.20 ABC2639 $64.95 $5.65 Clutch Alignment Tool Fits: 9N, 2N, 8N, NAA, Jubilee, 541, Some 600, 700, 800, 900 (1939-57) (1-3/8" dia. spline, 10 splines, .675" pilot dia.) NOTE: Check clutch spline dia. before ordering. Description / Application STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Transmission & Rear End Oil Filler Plug Fits: Some Dexta, Super Dexta, Fordson Power Major, Fordson Super Major; All 2000 3-cyl., 2600, 3000, 3400, 3500, 3600, 4000 3-cyl., 4000SU, 4400, 4500 4600, 4600SU (1965-81) Replaces: 957E7010 (1-5/8" x 12 thread) NOTE: Check thread dia. before ordering. Use ABC039 gasket sold separately. Transmission Input Shaft Seal Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series (1939-70) (All w/ 3 or 4 speed transmission), Replaces: 8N7052A (1.375" I.D., 2.000" O.D., .337" width) NEW! Sherman Transmission Shift Cable w/ Knob fits: 9N, 2N, 8N using Sherman cable shifted transmission, step up / step down, Replaces: 10B195 (3/8" - 24 NF inner ends & 1/2" - 20 NF outer end thread; 31-1/2" o/a length) 181 Ford: Chassis parts Gear shift lever, parts cont... www.SteinerTractor.com Order # Price FDS1451 Description / Application Order # Price Transmission Main Shift Lever (For 1, 2 & 3rd Speed Gears) Fits: Dexta, Super Dexta Replaces: 81717916, 957E7210C (11.89" long) FDS032 $98.50 Application Fits: 9N, 2N w/ 3 speed transmission Replaces: 9N7111 FDS016 FDS1447 $178.50 Fits: NAA, Jubilee $63.95 Replaces: NAA7111C (12-1/2" total length) NOTE: Close out. FDS017 $207.20 FDS2479 Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (All w/ 4 speed transmission thru 1964) Replaces: NDA7111C, C5NN7N109A (13" total length) $112.50 Gear shift lever, parts Order # FDS410 FDS1892 ABC288 FDS253 DEC451 182 Price $75.95 $9.95 $3.25 $3.85 $8.95 Description / Application Gear Shift Lever w/ Knob Fits: 8N, NAA, Jubilee, 501, 600, 700, 701, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 (All w/ 4 speed transmission), Replaces: C5NN7202B (5/16" UNF) Gear Shift Lever Spring Fits the following w/ 3 or 4 speed transmission: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000, 3000, 4000; Industrials: 340 thru 4500 w/ 4 speed torque converter transmission, Replaces: 9N7227B (2.210" tall, 1.768" tapers to 1.003" O.D., 0.140" wire dia.) Transmission Gear Shift Cover Plate Gasket Fits: 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series w/ 4 speed transmission (1947-70) Replaces: D5NN7223A USA made Gear Shift Pin fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series w/ 3 & 4 speed transmission Replaces: 9N7221B Transmission Shift Pattern Decal Fits: 2000, 3000, 4000 series (1965 & up); Industrials: 230A - 540A w/ 8 speed transmission & Live PTO Replaces: C5NN7B292 (3-15/16" x 5-1/4") USA made FDS2479GK $4.95 ABC085 ABC221 FDS088 Price $4.50 $4.50 Steering Wheels just like original • All new material • Steel spokes www.SteinerTractor.com FDS143 FDS143C Price $79.95 $15.95 Transmission Shifter Plate Fits: Dexta, Super Dexta Replaces: 957E7222 NEW! Transmission Shift Cover Assembly Fits the following w/ internal safety switch & 6, 7, 8 speed transmission: 2000, 3000, 4000, 5000 series (10/1966 - 74) Replaces: 81814737 (Main lever is 13-1/4" tall from cover up) NOTE: Stamped steel. Includes brass fill plug, (2) shift levers, knobs, boots. Has provision for dipstick, dipstick not included. See website for complete applications listing. Transmission Shift Cover Gasket (For FDS2479), Replaces: 82004680 NOTE: See website for full applications listing. ABC502 $2.50 FDS308 $59.95 FDS112 FDS197 Gear shift knobs, boot Order # Ford: Chassis parts Order # $69.60 Countershafts Steering wheels, parts $44.95 $6.45 Description / Application Gear Shift Lever Knob Fits: All Ford models w/ 4 & 5 speed transmission models (w/ original shift lever) Replaces: BB7213A (3/8"-24 NF) Gear Shift Lever Knob (Ball-Type) Fits: Dexta, 2000, 3000, 4000, 5000 & 7000 (1965 - 74); 231, 233, 335, 420, 515, 532, 535, 2600, 3600, 4100, 4600, 5600 & 7600 (1975 81); 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 6610 & 7610 (1981 - 91) 3230, 3430, 3930, 4130, 4630 (March 1990 & up) Replaces: C5NN7213A (3/8"-24 NF) ABC1591 $5.95 FDS111 $44.95 FDS189 $5.70 $3.50 Gear Shift Boot Fits: All Ford models (1939 to date) w/ 3 & 4 speed transmission Replaces: C5NN7277C, 8N7277, C0NN7277 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS1616 $9.95 Description / Application Steering Wheel Fits: 9N (1939-40); Ford 1-1/2 ton trucks (1941, 1942, 1946), Replaces: 9N3600B (18" dia., keyed hub, 3/4" shaft, 4 COVERED TO CENTER spokes) Chrome Steering Wheel Cap (For FDS143) Replaces: 9N3627 Steering wheels, parts cont... Order # Price FDS1594 $4.25 FDS363 $59.95 FDS426 $4.95 FDS1894 $66.95 Steering Wheel Nut (For FDS143) (5/8"-18 NF x .381" tall) Steering Wheel Fits: 9N, 2N (1939-47) (17-5/8" dia., keyed tapered hub, 11/16" - 13/16" shaft) NOTE: 3 covered to center spokes w/ grooves on outer ring. Steering Wheel Fits: 9N, 2N (1939-47) Replaces: 2N3600 (17-5/8" dia., keyed tapered hub, 11/16" - 13/16" shaft, bare spokes) Chrome Nut (For FDS112) Replaces: 351103-S (5/8"-18 NF x 1.132" tall) Chrome Nut (For FDS111) Replaces: 351114-S (11/16" UNF x 20) Dome Nut Washer w/ Beveled Edge (For FDS111) Replaces: 356515S36, 356515S (0.691" I.D. x 1.500" O.D., x 0.970" thick) NOTE: Clear zinc plating. Steering Wheel w/ Cap Fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 4600, 4610, 4600SU, 5000, 5100, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 7710, 7810 (1965 & up); Industrials: 231, 335, 340, 445, 531, 540, 3400,3500, 4400, 4500 Replaces: C5NN3600C (17-5/8" dia., 3/4" shaft, 36 splined hub) Steering Wheel Nut (For FDS363) Also fits: 1801, 4040, 4140, 6000 series Replaces: C5NN3N602A, D5NN3N602A (11/16" x 20 NF) Steering Wheel Emblem Fits: 6000; Serviceable for 6000 Commander Replaces: CONN16600A; Serviceable for C5NN3A515A (10 x 32 thread, 2.475" tall, 3.675" length of widest point) USA made FDS195 $46.95 FDS215 $54.95 MIS103 $10.75 Dome Nut Washer (For FDS112) Replaces: 2N3673 (1.497" O.D., 0.645"I.D., 0.180" thick) NOTE: Clear zinc plating. Steering Wheel Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, (Serviceable for 1801), 2000, 4000 4-cyl. series (thru 64), Replaces: 8N3600 (17-5/8" dia., 3/4" shaft, 36 splined hub) Description / Application Stainless Steel Nut (For FDS111) Replaces: 351114-S (11/16" UNF x 20) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Steering Wheel (Plastic) w/ Cap Fits: Fordson Major, Super Major, Power Major, Replaces: E1ADKN3600A (17-3/4" dia., splined hub, 1" shaft w/ 6 splines, 3 COVERED TO CENTER spokes) NOTE: Original look. Steering Wheel (Plastic) Fits: Dexta, Super Dexta Replaces: 957E3600 (17-3/4" dia., splined hub, 1-1/4" shaft w/ 48 splines, 3 COVERED TO CENTER spokes) Steering Wheel Spinner Fits: Ford models USA made NOTE: Aluminum. 183 Ford: Chassis parts Patent data plates USA made www.SteinerTractor.com Steering shafts, parts cont... Order # FDS339 Replaces: 9N14001 FDS338 Replaces: 8N14001 Steering column grommets, bushing Order # Price FDS229 $4.95 FDS375 FDS373 FDS424 FDS1380 $9.95 $9.50 $6.50 $9.25 Description / Application Steering Column Grommet Fits: 8N (1947-52) Replaces: 8N3578 Steering Column Grommet Fits: NAA, Jubilee Replaces: NAA3578B (2-5/8" O.D.) Steering Column Grommet Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1954-64) Replaces: NCA3578A (2-3/16" O.D.) Steering Column Grommet Fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 3930, 4000, 4000SU, 4600, 4600SU, 4610, 5000, 5100, 5200, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 7710, 7810 Industrials: 231, 233, 234, 335, 420, 515, 530A, 531, 532, 535, 550, 3400, 3500, 4400, 4500 (1965 & up), Replaces: C5NN3A566B, D2NN3A566B (3" O.D., 1-1/4" hole I.D.) Upper Steering Column Bushing (For Manual & Power Steering) Fits: 2000 thru 7610 (1965 & up) Replaces: C5NN3517A, D5NN3517A, 81811803 (1-916" x 1-1/16", .790" I.D.) FDS339 Description Price FDS163 $14.95 FDS395 $14.95 FDS162 $11.95 8N (1947-52) ...............................................................FDS338.............. $13.10 Order # FDS044 (RH) Price FDS045 (LH) $139.95 FDS046 $77.95 FDS408 184 Description / Application $139.95 $17.95 Steering Gear Sector w/ Arm Fits: 9N, 2N (1939-47) FDS044 Replaces: 9N3526 FDS045 Replaces: 9N3527 FDS388 $84.95 Steering Shaft Bearing Kit Fits: 9N, 2N (1939-47), 700, 900 Replaces: 68-3571A (bearing), 9N3573 (cone), B3552 (bearing cup) NOTE: Will fit FDS046 steering shaft w/ pinion. Kit includes: (2) bearings, (2) cones & (2) bearing cups. Bearing & cup (race) must be used together. Do not mix bearing or cup w/ old, original parts. ABC441 $21.25 Steering Sector Hardware & Seal Kit (For manual & power steering tractors) Fits: 8N w/ Adjustable side sector gears, Jubilee, NAA, 600, 800, 2000 4-cyl., 4000 4-cyl. series (thru 64) NOTE: Kit includes oil seal, adjuster bolt, nut,washer, o-rings, shim washers & felt seal. 2 used per tractor; Sold individually. FDS1205 $2.00 Felt Seal fits: 8N thru 4000 4 cyl as a steering sector felt seal; 2000 3-cyl thru 8340 as a disc brake cross shaft seal, Replaces: 8N3586 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Steering Gearbox Pitman Shaft Oil Seal Fits: 5000, 5110, 5600, 5900, 6410, 6600, 6610, 7000, 7600 (All w/ manual steering) Replaces: C5NN3C615B, 81803190 (2.000" O.D., 1.500" I.D., 0.250" wide) $12.50 ABC528 $39.60 Top Bearing Steering Shaft Kit (For manual steering only) Fits: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 4-cyl. Replaces: 8N3518 (seat), 8N3520 (spring), C5NN3N716A (steel bearing assy) FDS387 $33.95 Steering Shaft Bearing Kit (For manual steering tractors) Fits: 8N, NAA, Jubilee, 600, 800, 2000, 3000, 4000 (All to 8/31/1968), Replaces: 8N3571 (bearing), 8N3552 (cup), New # C5NN3552A (cup) NOTE: Kit includes: (2) bearings & (2) bearing cups. Bearing & cup (race) must be used together. Do not mix bearing or cup w/ old, original parts. Steering Shaft w/ Pinion Fits: 9N, 2N (1939-47) Replaces: 9N3525 Steering Wheel Cover w/ Grease Fitting Hole, Spring & Felt Seal Fits: 9N, 2N (1939-47) Replaces: 9N3669 NOTE: Chrome. Description / Application ABC2008 Steering parts Sherman Transmission Instruction Plate Fits: NAA thru 4000 4-cyl. series (All w/ 4 speed transmission) (thru 64) NOTE: Installs on dash. Power Steering Plate Fits: 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (thru 64) Price 9N, 2N (1939-47) ........................................................FDS339.............. $13.10 Description / Application Sherman Transmission Instruction Plate Fits: Ford models w/ Sherman Step Up / Step Down transmission $9.95 FDS338 Order # Steering wheel plates - USA made Order # ABC1996 Price Ford: Chassis parts www.SteinerTractor.com Power steering parts cont... Order # Price FDS1274 $54.95 Power Steering Pump Pulley (For tractors with canister on top of pump) Fits: 601, 700, 701, 740, 801, 900, 901, 950, 960, 2000, 4000 4-cyl series (thru 1964) Replaces: 231102, EBJ33556A (3.750" O.D., .671" bore, .125" keyway, .500" wide belt groove) NOTE: Cast iron. FDS1163 $5.65 Power Steering Pump Cap Fits the following October/1968 & up: 2000 thru TW35 w/ horizontal power steering pump reservoir, Replaces: C9NN3D588A, D2NN3A006B (1.500" I.D.) FDS459 $249.95 Power Steering Cylinder fits: 601, 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000 & SU, 4600 SU, 4610 (1957 & up) (All w/ dual cylinder steering), Replaces: D4NN3A540B, D4NN3D547B, E2NN3A540BA, E4NN3A540AA (1/2" dia. rod, 7/16" threaded end) USA made NOTE: LH & RH are the same. ABC267 $28.95 FDS461 $249.95 Steering Gearbox Side Sector Seal Fits: 700 thru 900 series; (2110 & 4110 4-cyl.) (1955-64), Replaces: NCB3591B (2.110" O.D., 1.375" I.D., .315" wide) USA made Power steering parts Order # Price Description / Application ABC1233 $337.95 Belt Driven Power Steering Pump (For tractors using Eaton style pump) Fits: 601, 700, 701, 801, 900, 901, 1801, 2000, 4000 4-cyl. (thur 1964) (All w/ canister on top of pump), Replaces: Eaton P761, 20928, 503-1003, 503-1005-005, Ford C0NN3A674H, C3NN3A674C NOTE: For 5/8-18" male inverted flare pressure line. Can be adapted to tractors using Char-Lynn power steering w/ Eaton pump. Does not include brackets, reservoir or pulley. Some Ford applications will require a new pressure hose to be made. FDS1350 $307.50 Power Steering Pump w/ Reservoir Fits October/1968 & up: 2000 thru 2610, 3000 thru 3900, 4000 thru 4600, 5000 thru 5700, 6600, 6700, 7000 thru 7700 Industrials: 231 thru 532, Replaces: D8NN3K514CC, E6NN3K514, CA, DA, EA, EA99M, FA, GA, HA, 83949432, 8395950, 87759440 (2.74 GPM, 1100 PSI) NOTE: Pressure is preset at 1100 psi. May have to change relief valve for some applications requiring a higher pressure. Has 1 return port, if your original has 2 ports you will need to add a ’tee’. When mounted return fitting is at 1:00. Description / Application FDS1382 FDS1384 Description Power Steering Cylinder End Fits: Same as FDS459, FDS461 Replaces: C5NN3A302B (7/16"-20 Internal thread) NOTE: LH & RH are the same. Power Steering Cylinder fits: 601, 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3600, 3610, 3910, 4000 & SU, 4600 SU, 4610, 231, 335, 531 (1961 & up) (All w/ dual cylinder steering), Replaces: C5NN3A739G, C5NN3C578B, D4NN3A540A, E9NN3A540AA (5/8" dia. rod, 7/16" threaded end) USA made NOTE: Can also replace 1/2" rod cylinders. Power Steering. LH & RH are the same. Radius rod parts Fits: 2N thru 4600SU FDS1382 Replaces: 8N3440B, 313319, 957E3440A,B, 83924040, C7NN3N406A, EONN3N406BA FDS1384 Replaces: 9N3442, C5NN3N442A,C, EONN3N442BA Order # Price Radius Rod Ball Cap................................................FDS1382............ $9.15 NOTE: 2 used per tractor; Sold individually. Radius Rod Ball Socket............................................FDS1384............ $17.80 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 185 Ford: Chassis parts Tie rod assembly, ends cont... www.SteinerTractor.com Order # Price ABC235 $17.95 NOTE: Length is from end of shaft / tube to center of post / ball stud. Order # Price FDS2478 (RH) $94.95 Description / Application ABC265 $16.50 NEW! Tie Rod Assembly (Drag link FDS2474 $94.95 Assembly) fits: 9N, 2N (1939 - 47) (LH) FDS2478 Replaces: 9N3304 FDS2474 Replaces: 9N3305 NOTE: Adjustable from approximately 38-1/2" to 39-3/16" c.c. tie rod studs. FDS314 FDS315 $72.95 Tie Rod Assembly (Tie Rod Ends, Clamps & Drag Link Tube) fits: 8N (1947-52) w/ Late adjustable-style steering box Replaces: 8N3304B, 8N3305B (32-1/2" long tube; 36 to 40" adjustment) NOTE: Check measurement before ordering. NEW! Tie Rod Assembly (Drag link Assembly) fits: Jubilee, 600, 800, 2000 thru FDS2492 $94.95 4000 4-cyl. Utilities only (1953 - 64) (All w/out power steering) (LH) FDS2497 Replaces: NAA3314B, NAA3270A, NAA33271A FDS2492 Replaces: NAA33315A, NAA3270A, NAA33271A NOTE: Adjustable from approximately 423/8" to 46-1/2" c.c. tie rod studs 186 Price FDS336 $3.50 FDS335 FDS484 $3.95 $8.95 $15.75 $16.65 Front Tie Rod End Fits: 8N (1947-52) Replaces: 8N3270 (.687" - 18 LH thread, 4.00" to center of post) FDS2497 (RH) Order # FDS337 $94.95 NEW! Tie Rod Assembly (Drag link FDS2482 $94.95 Assembly) fits: 8N up to SN: 216989 w/ early 4 bolt side sector steering gear box (LH) FDS2487 Replaces: 8N3304A FDS2482 Replaces: 8N3305A NOTE: Adjustable from approximately 36" to 39-1/2" c-c tie rod studs. FDS393 $94.95 Price Front Tie Rod End Fits: NAA, Jubilee, 600, 601, 800, 801, 2000 4-cyl., 4000 4-cyl. (1953-64) w/ manual steering not industrial axle Replaces: NAA3270A (.687" - 18 LH thread, 3.875" to center of post) FDS1506 $48.50 Rear Tie Rod End Fits: Some 9N, 2N, 8N, NAA, 600, 601, 800, 801, 2000 4-cyl., 4000 4-cyl. (1939-64) w/ manual steering not industrial axle, Replaces: NAA33271A ((.687" - 18 RH thread, 4.250" to center of post) ABC087 $32.50 ABC088 $36.50 Tie rod boots $16.65 Front Tie Rod End Fits: Some 9N, 2N (1939-47) Replaces: 9N3270 (.687" - 18 RH thread, 3.187" to center of post) FDS2487 (RH) Order # Description / Application Tie rod assembly, ends Description / Application Front Tie Rod Boot Fits: 9N, 2N (1939-47) Replaces: 78-3332 (1.200" base, .475" tall, .500" hole) ABC379 ABC368 Rear Tie Rod Boot w/ Rubber Insert Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl, 4000 4-cyl (1939-64) Replaces: 9N3324, AONN3324A (1.425" base, .850" tall, .700" hole) Rear Tie Rod Boot w/ Leather Insert Fits: 9N, 2N, 8N; Serviceable for NAA, Jubilee, 600, 800, 2000 4 cyl, 4000 4 cyl (1939 - 64) Replaces: 9N3324 NOTE: Exact of original. JDS736 $3.35 $10.45 Front Tie Rod Boot Fits: 8N, NAA, Jubilee, 600, 800 (1947-57) Replaces: 8N3332 (1.450" base, .600" tall, .550" hole I.D.) NOTE: Also works as a power steering cylinder end boot 601 thru 4610. Universal tie rod boots fits: Ford models Specify size when ordering (Base x Height x Hole I.D.) ABC368 ABC371 Ford: Chassis parts Front axle parts ABC369 JDS736 $3.95 (1.500" base, .735" tall, .550" hole) ABC371 $3.25 (1.300" base, .965" tall, .500" hole) ABC369 $2.95 (1.575" base, .600" tall, .650" hole) ABC370 $3.50 (1.800" base, .765" tall, .740" hole) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Front Axle Support Pin Fits: 9N, 2N (up to SN: 167488) Replaces: 2N3126E, 9N3126A, 2N3126B (4.660" o/a length) NOTE: CLOSE OUT www.SteinerTractor.com Spindle parts cont... Order # Price ABC381 $12.95 Front Axle Support Pin Fits: 2N SN: 167489 & up, 8N; 6000 w/ All Purpose wide front axle (1/1963 - 12/1966) Replaces: 2N3126D (1.743" O.D., 1.310" I.D.) Front Axle Support Pin Fits: NAA, Jubilee (1953-54); Fits the following w/ front hydraulic pump drive: (2N SN: 167489 & up), 8N; Fits following w/ all purpose wide front axle: 6000 1/1963 12/1966, Replaces: NAA3126B (1.743" O.D., 1.310" I.D.) NOTE: Not threaded. Front Pivot Bushing Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. series (1939-64) (All w/ standard front axle), Replaces: 2N3039 (1.770" I.D.) USA made NOTE: Will not fit heavy duty or industrial axles. Order # ABC151 ABC468 Price $9.95 $3.95 EACH ABC1442 $3.20 Description / Application Thrust Bearing (For Front Spindle) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 series, Dexta, Super Dexta, 2000, 3000, 4000SU (1939 & up) (All w/ adjustable I Beam Regular Front Axle) (Not H.D. axle), Replaces: C0NN3123B (1.350" I.D., 2.195" O.D.) Bushing for Front Spindle Fits upper & lower on the following models: 9N, 2N, 8N, NAA, Jubilee (1939-54); Fits upper only on the following models: 501, 600 & 800; 700, 900 series (Both w/ wide front) 2000 3 & 4-cyl., 2600, (3000 except vineyard) 3600, 3610, 3900, 3910, 4000 4-cyl., 4100 3-cyl., 4600SU, 4610, 6000, Dexta, (1955-81) (All w/ standard adjustable wide front, not for heavy duty axle), Replaces: 2N3109 (1.250" I.D., 1.370" O.D.", 1.500" long) Spindle Dust Seal Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. (thru 1964); 2000 thru 4600SU, 4610, 6000 (1965 & up), Replaces: 8N3528, C5NN3125A Description / Application Spindle Bushing Kit fits: 600, 700, 800, 900 w/ Wide Front, 2000, 2600, 3600, 3900, 4000 except Vineyard, Dexta, Super Dexta, 3000, 4100, 4600, 4600SU, 4610 (All w/ standard axle), Replaces: 2N3109 (upper) & NCA3110A (lower) (1.25" I.D., 1.35" I.D.) NOTE: Will not fit heavy duty or industrial axles. Seat pan, parts The following seat parts fit 9N, 2N, Early 8N: Order # Price FDS067 $48.50 Description / Application Seat Pan, Replaces: 8N400 (19" dia.; 5/8" center bolt hole) NOTE: Steel, 9 hole, bolt down, non-flip back. ABC372 $18.30 FDS068 $49.95 Spindle parts ABC370 Also fits as a rear tie rod boot for 601, 801, 2000, 4000 4-cyl., Replaces: A0NN3324A (1.675" base, .900" tall, .625" hole) Description / Application Seat Repair Kit w/ Rivets (For FDS067 Seat Pan) (5-1/2" O.D.; 5/8" center bolt hole) USA made Seat Spring Replaces: 9N404 Flip-back seat pan, parts The following seat parts fit Late 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 4-cyl. series (thru 64), 'Some' Dexta, Super Dexta: Order # Price FDS105 $49.10 Description / Application Seat Pan w/ Hinge Half (For Flip-Back Seat) Replaces: C5NN400AE FDS106 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $16.15 Seat Hinge & Bolt (For Flip-Back Seat) Replaces: NCA436A, 352644S36 Flip-back seat pan, parts continue on next page 187 Ford: Chassis parts Monroe® easy ride seat parts cont... www.SteinerTractor.com Order # Price IHS325 $2.05 Flip-back seat pan, parts cont... The following seat parts fit Late 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 4-cyl. series (thru 64), 'Some' Dexta, Super Dexta: Order # Price FDS107 $44.50 FDS294 FDS232 $10.75 $3.50 IHS030 IHS329 MHS044 ABC526 IHS585 188 Price $27.95 $32.50 $39.95 $9.65 $22.80 Rubber Seat Bushing Fits: 9N, 2N, 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 230288 NOTE: 2 used per horizontal bolt; old individually. Ford: Chassis parts Fits: Ford models w/ 19" pan seat (side to side) www.SteinerTractor.com Order # FDS283 Price Description $33.75 Fenders, parts - Licensed by Ford Tractor Seat Cushion (Dark red w/ white piping) Seat Spring (For Flip-Back Seat) Replaces: NCA404B (2-1/4" wide) Seat assembly, parts Order # Price ABC445 $139.30 Seat to Spring Retaining Clip w/ Rivets (For original 3" wide Seat Spring) Replaces: 8N433 Seat to Spring Rubber Bumper (For Flip-Back Seat), Replaces: 8N434B (7/8" O.D.) NOTE: (1) FDS232 Rubber Bumper required per tractor. FDS299 (LH) $54.95 Description / Application Seat Spring Coil Fits: 9N, 2N, 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat Replaces: 230279 Rear-Mounted Seat Shock Absorber Fits: 9N, 2N w/ optional Monroe® Easy Ride seat (Center-to-center compressed = 11-1/2", Fully extended = 18-1/8") USA made NEW! Seat Shock Absorber w/ Bushings Fits: 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seatm Replaces: 231239 (Center-to-center compressed = 6-1/4", fully extended = 8-1/4) NOTE: One horizontal bolt hole at each end. FDS300 (RH) FDS477 JDS533 $54.95 $39.95 $37.85 Seat Shock Bolt (For IHS329 & IHS347) Replaces: 230290 (7/16" NC thread, .625" shoulder, 2.380" o/a length) USA made Seat Pivot Support Rod Fits: 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 230287 (6") NOTE: Includes rod, (2) flat washer, (2) rubber bushings & (2) 5 bolts. "The only licensed stamped fenders on the market!" • Stamped w/ raised Ford "script" like original! • Not plastic molded where embossed "Script" will sand off! • Fenders are sold individually. Description / Application Monroe® easy ride seat parts Order # Description / Application Tractor seat cushions FDS284 Description / Application Universal Full Suspension Seat w/ Back Rest & 5-Angle Base (w/ slide track & mounting brackets) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4000SU, 4100, 4110 4400, 4500, 4600, 4600SU, 4610, 5000, 5600, 5610, 5610SU, 5900, 6600, 6610, 7000, 7600, 7610 (All w/out cabs) Replaces: D9NN400DB12B NOTE: Can be adapted to fit many tractors & lawn mowers. Customer may have to trim base on tractors using remote hydraulics. Rubber Seat Spring Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (thru 64) w/ "Rest-O-Ride" seats; Major, Super Major, Power Major w/ Deluxe seat; 6000 (1961-64) w/ Regular seat not Deluxe seat FDS299 Replaces: NDA448A FDS300 Replaces: NDA447A NOTE: FDS299 & FDS300 Springs do not come w/ bushings. You must reuse old ones or purchase FDS477 kit. Tractor Seat Cushion (Dark blue w/ white piping) FDS230 $33.75 FDS321 $33.75 Fits: 9N thru 4000 4-cyl. series, 4030, 4040, 4121, 4130, 4140 (1939-64) (All w/ Knoedler 1800 seat) USA made Order # Price Price FDS070 $97.50 ABC2255 $28.95 Fender Bolt Kit fits: 9N thru NAA; Serviceable for 600 thru 4000 4 cyl thru 1964 when not equipped with sway bar brackets or loader brackets, Replaces: 375651S8 NOTE: Includes 4 carriage bolts, nuts, lock washers. FDS102 $159.95 Fender Skin only w/ raised Ford "script" imprint Fits: 8N (June 1950-52); Jubilee (1953), NAA (1954) Replaces: 8N16312C NOTE: Steel, primer paint. FDS414 $224.95 Fender Skin only w/ raised Ford "script" imprint Fits: 600, 800 series (1954-57) Replaces: NCB16312C (25" H x 48" W x 7" wide 'top lip') NOTE: Steel, primer paint. FDS238 $142.15 Fender Skin only w/ raised Ford "script" imprint Fits: 501, 601, 701, 801, 901 (1957-62), 1801, 2000, 4000 4 cyl.; Serviceable for 2000 3-cyl. thru 4610 (1965 & up) Replaces: C5NN16312AK, C5NN16312AU, E1NN16315DA (17-3/4" H x 42" W) NOTE: Steel, primer paint. FDS301 $179.95 Fender Assembly w/ Bracket w/ raised Ford "script" imprint Fits: 601, 801, 1801 series, 2000, 2310, 2600, 2610, 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 & SU, 4100, 4110, 4400, 4500, 4600SU & 4610 (1965 & up), 340A, 420, 445, 445A, 535, 540A, 540B, 545 Replaces: C5NN16312AK, C5NN16312AU (Heavy gauge, Skin measures 17-3/4" H x 42" W) NOTE: Steel, primer paint. Tractor Seat Cushion (Blue & white w/ blue "Ford" script) FDS322 $33.75 Tractor Seat Cushion (Gray & white w/ gray "Ford" script) $35.65 Seat Bushing & Pin Kit (For FDS299, FDS300), Replaces: 230612, 230626, 305191 NOTE: Bushings must be reamed/honed when installed. Seat Adjustment Handle fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (thru 64) w/ "Rest-O-Ride" seats; Also fits Major, Super Major, Power Major w/ Deluxe seat; Also fits 6000 (1961-64) w/ Regular seat not Deluxe seat, Replaces: NDA462A Order # Tractor Seat Cushion (Red & white w/ red "Ford" script) FDS1226 Knoedler seat part Description • Fit to tractor before painting. $33.75 Tractor Seat Cushion (Black w/ red/white "Ford" script, black/white "Tractor") MIS006DB $29.95 Universal Tractor Seat Cushion (Blue & white) (Deluxe, thicker pad, drawstring type) MIS006DR $29.95 Universal Tractor Seat Cushion (Red & white) (Deluxe, thicker pad, drawstring type) Seat Bearing (For Knoedler Seats)........................ ABC537.............. $14.30 NOTE: 2 to 8 used per tractor; Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Fender Skin only w/out raised Ford "script" imprint Fits: 9N, 2N; 8N (thru June 1950) Replaces: 9N16312 NOTE: Steel, primer paint. Fenders, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 189 Ford: Chassis parts Running boards, parts www.SteinerTractor.com Order # ABC439 (LH) Fenders, parts - Licensed by Ford cont... • Fenders are sold individually. FDS078 ABC437 ABC2255 FDS174 Price $149.85 $1.00 $28.95 Description / Application Fender Assembly w/ Bracket w/out raised Ford "script" imprint Fits: 601, 801, 1801 series, 2000, 2310, 2600, 2610, 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 & SU, 4100, 4110, 4400, 4500, 4600SU & 4610 (1965 & up), 340A, 420, 445, 445A, 535, 540A, 540B, 545 Replaces: C5NN16312AK, C5NN16312AU (Heavy gauge, Skin measures 17-3/4" H x 42" W) NOTE: Steel, primer paint. Rivet (For Fender Skin) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (thru 57) (.371" dia., 1.010" o/a length, .746" head dia., .800" useable length) NOTE: 4 used per fender (9N, 2N, 8N, NAA) & 8 used per fender (600, 800); Sold individually. FDS170 Fender Bolt Kit Fits: 9N thru NAA; Serviceable for 600 thru 4000 4 cyl thru 1964 when not equipped with sway bar brackets or loader brackets, Replaces: 375651S8 NOTE: Includes 4 carriage bolts, nuts, lock washers. ABC440 (RH) ABC446 $15.35 FDS2280 $16.95 Order # Price ABC308 $37.95 FDS247 $34.50 $14.25 $14.25 Ford "Script" Painting Mask Kit For NAA, Jubilee fenders & hoods, (600, 800 series (thru 1957) hood only) (2) - hood & (2) - fender self-adhesive masks per kit Licensed by Ford USA made FDS136 FDS214 $74.95 Rear Bracket Serviceable for 9N, 2N NOTE: Sold individually. Running Board to Bracket Hardware Kit Fits: 8N, NAA, Jubilee, Golden Jubilee (1947-54), Replaces: 355471S8 NOTE: Includes 8 special carriage style bolts, lock washers, nuts. Price ABC192 $53.95 ABC020 MIS1131 $74.95 $33.95 MIS2547 $89.95 ABC083 $59.00 ABC084 $19.75 EACH Fits: 9N, 2N (11" long, 4" wide, 4-1/2" tall, Bolt holes center to center = 5-1/2") NOTE: Must redrill hole. Fits: 8N Replaces: 8N17005 NOTE: Mounts under the hood. Like original. Fits: Jubilee, NAA (1953-54) Replaces: NAA16451 USA made NOTE: Must be spot welded to existing running board. Fits: 501, 600, 700, 800, 900, 2000, 4000 4-cyl. series (1954-64), Replaces: C5NN17005F, NCA17005A NOTE: Fits between step plate & rear axle housing. ABC472 $28.95 Description / Application NEW! Brake Lining Set w/ Rivets Fits: 9N, 2N (1939-47), Replaces: 9N2021B (2" W x 15-1/2" L) NOTE: Set includes: 4 brake linings w/ rivets. Bonded Brake Shoe Set Fits: 9N, 2N (1939-47) Replaces: 9N2019 NOTE: Set includes: 4 bonded brake shoes. Brake Riveting Tool Kit (1-1/4" throat, 1/8" dia. rivet punch) USA made NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Mounts into vice. Not for use w/ deep recess shoes. FDS1870 FDS1445 $0.75 $99.95 Fits: 501 thru 8830 (1955 & up) Industrial: 340A, 420, 445, 445A, 535, 540A, 540B, 545 Replaces: C5NN17005C, C5NN17005F11M (4" wide x 16" long x 4-1/4" tall) NOTE: Fits on FDS078, FDS238, FDS301 fenders. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS194 FDS251 $75.95 $4.75 www.SteinerTractor.com Brake parts cont... Order # Price FDS241 $19.95 FDS412 $7.10 Brake Adjusting Hole Cover Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000 series, (4000 4-cyl. Series) (1947 & up), Replaces: H2092, ERK27670 FDS417 $4.95 EACH Brake Pedal Return Spring Fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 4000, 4000 SU, 4100, 4110, 4500, 4600; Industrials: 230A & up (1965 & up), Replaces: C5NN2472B, E1NN2472BA (3.221" o/a length) NOTE: Mounts under running board. 2 used per tractor; Sold individually. Go to website for full applications. ABC1225 $2.15 NEW! Riveting Tool (For brake shoe & disc relining for most tractors) (3-3/8" deep throat x 2-1/8" high throat) USA made NOTE: Includes 2 punches. Application $47.95 $47.25 Fender Light Brackets, Pair Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N13470, 9N13471 NOTE: Sold as pair. Ford gray. 190 $69.95 Order # Toolboxes Ford "Script" Painting Mask Kit For 8N (1947-52) fenders & hoods (2) - hood & (2) - fender self-adhesive masks per kit Licensed by Ford USA made FDS228 Description / Application Running Board (Foot Platform) w/out Rear Bracket $69.50 Serviceable for 9N, 2N NOTE: Sold individually. • Fit to tractor before painting. Order # Price Ford: Chassis parts Brake parts Bonded Brake Shoe Set Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2200B NOTE: Set includes: 4 bonded brake shoes. Bonded Brake Shoe fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1954-64), Replaces: NCA2218B NOTE: 4 required per tractor; Sold individually. Brake Drum Retaining Screw fits: 8N thru 981 (thru 1959), Replaces: 24667S, 24667S8 (Zinc; 3/8"-16 NC x 3/4") NOTE: 2 to 4 used per tractor; Sold individually. Brake Backing Plate Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2212B NOTE: 2 used per tractor; Sold individually. Brake Dust Shield w/ Felt Seal Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2255 (plate) & 8N2217 (seal) NOTE: 2 used per tractor; Sold individually. Description / Application Parking Brake Lever Fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57), Replaces: NAA2782A NOTE: 2 used per tractor; Sold individually. NEW! Disc Brake Ball Fits: 2810 thru 7710, Replaces: D5NN2N141A (7/8" dia. steel ball) NOTE: Sold individually. Brake repair kits NOTE: Each Complete Kit contains all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Does not include shoes. (1) KIT FOR (1) WHEEL ONLY. Order # FDS1224 Price Application $34.95 Fits: 9N, 2N (1939-47) Replaces: 9N2065 NOTE: Repairs 1 side. FDS252 $34.95 Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8NAA2250 NOTE: Repairs 1 side. ABC165 Felt Seal only (For Brake Dust Shield) Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2217 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $83.50 Fits: 501, 600, 700, 800, 900, 1801 series, 2000, 4000 4-cyl. series (1954-64) Replaces: NCA2250 USA made 191 Ford: Chassis parts Rear axle, hub, parts cont... www.SteinerTractor.com Order # Price FDS318 $11.10 Rear Axle Nut & Snap Ring Kit Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N4179, 8N4187, CBPN4179A USA made NOTE: Original style. Differential side cover gasket Fits: 9N, 2N, 8N, (501 thru 4000 4-cyl.) (193964) EXCEPT Jubilee; Also a PTO Shifter Plate Cover to Differential Housing Gasket for Ford models (1939 & up) (including NAA) Replaces: 9N4131 USA made Description Order # Price Description / Application FDS479 Rear axle, hub, parts cont... Order # Price ABC264 $14.95 ABC199 $58.70 ABC197 $11.40 $2.00 Snap Ring only (For FDS318) Replaces: 8N4187 USA made Differential Side Cover Gasket............................. ABC289.............. $1.00 Pinion shaft seal Fits: NAA, Jubilee Replaces: NAA4676A (1.375" I.D., 2.378" O.D., .312" width) USA made Description Order # ABC234 $36.10 Wheel Clamp Lock Nut Fits: 8N, NAA, Jubilee (1947-54) (1-1/4" - 18) NOTE: No re-threading necessary on worn shafts. Price Pinion Shaft Seal...................................................... ABC1543............ $13.95 FDS1201 Rear end overhaul gasket kit $7.50 Fits: 9N, 2N, 8N (1939-52) Description Order # Price 7-Piece Rear End Overhaul Gasket Kit................ ABC433.............. $11.65 FDS1211 $1.15 Rear axle, hub, parts Order # Price ABC261 $165.95 Description / Application FDS394 $1.65 Axle Shaft Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N4235C FDS043 ABC386 $84.25 $1.30 Rear Hub Assembly w/ Bolts Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N1171 ABC357 FDS255 192 $4.25 Rear Axle Hub Washer Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N4293 USA made $9.65 Rear Lug Stud Fits: 9N, 2N (1939-47) Replaces: 9N1117 (5/8" x 15 NF thread, 1.875" o/a length) NOTE: 12 required per tractor; Sold individually. Rear Lug Nut Fits: 9N, 2N (1939-47) Replaces: 33806S7, 81871950 (5/8" x 18) USA made NOTE: 12 required per tractor; Sold individually. Rear Lug Stud Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. Replaces: 312696 (5/8" x 18 thread, 1-5/8" o/a length) USA made NOTE: 16 used per tractor; Sold individually. Rear Lug Nut Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2600, 2610, 2810, 2910, 3000, 3610, 3910, 4000 4-cyl., 4110, Replaces: 8N1134 (5/8" x 18) NOTE: 16 required per tractor; Sold individually. For 2600-up check thread size. Rear Axle Shaft Paper Gaskets / Shims Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N4130, 8N4229E (0.015" thick) USA made NOTE: Use for seal between bearing retainer, axle housing or backing plate. Use in multiples to replace shims 8N4229. Sold as a package of 10. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Axle Shaft Collar Fits: 9N, 2N (1939-47) Replaces: 9N4132 USA made Axle Shaft Cone Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 2N4221 USA made Axle Shaft Cup Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. (1939-64) Replaces: 9N4222 Ford: Chassis parts www.SteinerTractor.com Rear axle shaft seals cont... Order # Price Description / Application Outer Seals cont... ABC193 $19.40 ABC491 $5.75 Rear Axle Shaft Outer Oil Seal Pair Fits: 8N SN: 486753 & up, NAA, Jubilee Replaces: D5NN4115A (3.77" O.D.) NOTE: Used on tractors w/out sheet metal seal retainers. Rear Axle Shaft Outer Oil Seal Fits: Dexta, Super Dexta, 2000, 3000 (1965 & up), Replaces: C5NN4115B NOTE: 2 used per tractor; Sold individually. Gaskets FDS428 Rear axle shaft seals Order # Price ABC382 $15.70 $4.95 Rear Axle Shaft Outer Oil Seal Gasket (Rubber) EACH Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N4284 (2-3/16" O.D. x 1-15/16" I.D.) USA made NOTE: 2 used per tractor; Sold individually. Description / Application Inner Seals ABC196 Rear Axle Shaft Inner Oil Seal Pair Fits: 9N, 2N (1939-47) NOTE: This is an improved differential seal which stops leakage from differential into the brakes. Installs without pulling axle bearing. Slides on the axle & taps into place at lip of bearing retainer. Must pack the wheel bearing w/ grease when using these seals. Sold as a pair. $11.30 Rear Axle Shaft Inner Oil Seal Pair Fits: 8N, NAA, Jubilee Replaces: 8N4233A ABC282 $6.75 Rear Axle Shaft Inner Oil Seal Fits: Dexta, Super Dexta, 2000, 3000 (1965 & up), Replaces: C9NN4N109A (1.869" I.D.; 2.75" O.D.; .5045" wide) FDS431 $3.95 Hydraulic lift parts Order # Price ABC317 $8.50 FDS457 $83.55 ABC299 $101.95 Outer Seals ABC194 $19.40 Rear Axle Shaft Outer Oil Seal Pair Fits: 9N, 2N (1939-47) Replaces: 9N4251, D6NN4251A FDS427 $33.55 Rear Axle Shaft Outer Oil Seal Pair w/ Sheet Metal Retainers Fits: 8N up to SN: 486752 Replaces: A8NN4248A (3.75" O.D.) NOTE: Used on tractors w/ sheet metal seal retainers. 2 used per tractor; Sold in pairs. Rear Axle Shaft Outer Oil Seal Retainer to Housing Gasket fits: 8N up to SN: 486752 Replaces: 8N4225 (4-3/8" O.D. x 3-3/4" I.D.) NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Quadrant Stop Kit w/ Wing Nut & Flat Washer Fits: Ford models (1939-64) except Majors Replaces: 9N521 Hydraulic Valve Adaptor w/ O-Rings, Bolts & Instructions Fits: 501, 600, 700, 800, 900 series, 1801, 2000, 3000, 4000 series, 5000, 2600, 3600, 4600, 5600, 6600 series Industrials: 230 thru 545 (1954-81) ((2) 3/8" NPT ports) USA made NOTE: Installs between your existing hydraulic block off plate on your lift cover to run external hydraulics off the tractor. Hydraulic Lift Cylinder (For 2-1/2" dia. piston) Fits: 9N, 2N, 8N Replaces: 9N510D Hydraulic lift parts continue on next page 193 Ford: Chassis parts Hydraulic lift parts cont... www.SteinerTractor.com Order # Price FDS416 $14.85 Hydraulic lift parts cont... Order # Price ABC300 $34.55 ABC266 ABC314 ABC315 $13.25 $29.95 Description / Application Hydraulic Lift Piston Fits: 9N, 2N, 8N (1939-52) Replaces: 9N530B USA made Order # Price Hydraulic Lift Oil Level / Dipstick Fits: 600, 700, 800, 900, 1811, 2000 4-cyl., 4000 4-cyl. series (1954-64) except Grove & Offsets Replaces: NCA927BC ABC1809 $42.50 FDS153 Description / Application $249.95 Basic Hydraulic Pump Rebuild Kit Fits: 9N, 2N, 8N (1939-52) FDS153 Contains: (1) Base Gasket, Replaces: 9N611; (2) Chamber Repair Kit, Repairs 9N621, 9N622; (2) Cam Block, Replaces: 9N617A; (2) Piston, Replaces: 9N615; (1) PTO Shaft Bushing, Replaces: 9N649A; (1) Safety Valve, Replaces: 8N638; (1) Sump Plug Gasket, Replaces: 8N7011; (2) Side Gasket, Replaces: 9N613; (1) PTO Shaft Gasket, Replaces: C5NN747A; (2) Side Plate Gasket, Replaces: 9N4131 FDS365 $21.15 FDS242 FDS073 ABC219 194 $42.95 ABC549 (LH) $27.25 $3.50 $5.99 Hydraulic Lift Draft Control Plunger Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. (1939-64) Replaces: 8N541B NOTE: Fine thread-style. Hydraulic Lift Lever Control Friction Plate Fits: 9N, 2N, 8N, Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. (1939-64) Replaces: 2N516A, 2N516A2 Hydraulic Lift Lever Cover Friction Disc Fits: 9N thru 7700 series (1939 & up) Replaces: C5NN518B, 83977032 (3" O.D., 7/16" center hole) Hydraulic Lift Oil Level / Dipstick Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: NAA927C ABC1820 ABC1814 $46.50 $29.95 $45.65 $100.75 Washer (For ABC314) USA made FDS273 ABC1812 Hydraulic Pump Control Valve Assembly Fits: 9N, 2N (1939-47) Replaces: 9N640 $1.25 $2.90 Order # Price O-Ring (For ABC314) ABC316 Description / Application Hydraulic pump parts 3-Piece Steel Ring Kit (For ABC300) USA made Hydraulic Lift Piston Fits: NAA, Jubilee (1953-54) Replaces: NAA530B; Optional for 9N, 2N, 8N when used w/ O-ring (NAA533A), backup washer (NAA473A) USA made Hydraulic pump parts cont... Description / Application Front Hydraulic Pump Drive Hub Adaptor Fits: Some 9N, 2N, 8N when equipped w/ ABC021 crankshaft pulley Replaces: 192161 (3-3/8" O.D., 2-3/8" c.c. across bolt holes, 3/4" spline I.D., 6 splines. (4) 1/4" mounting holes, 1.005" thick) NOTE: Measure old pulley bolt spacing before ordering. Use with ABC1820 shaft. Front Hydraulic Pump Drive Hub Adaptor Fits: NAA, 600, 800; (2000, 4000 4-cyl. series) Replaces: 290421, 500934 (10 splines, 1" I.D., 2-3/4" c.c. across bolt holes, 4" o/a dia., 7/16" bolt holes) NOTE: For shaft use ABC1814. Front Hydraulic Pump Drive Shaft Fits: Some 9N, 2N, 8N, Replaces: 194354 (13" long, 3/4" O.D., 1 end is 6 spline and the other end is 0.187 keyway) USA made NOTE: Measure before ordering. Use w/ ABC1809, ABC021. Front Hydraulic Pump Drive Shaft Fits: NAA, 600, 800, 2000 4-cyl., 4000 4-cyl. series (1953-64), Replaces: 195454 (9-3/8" length, pulley end = 1" O.D. x 10 splines, pump end = 3/4" O.D. w/ 3/16" x 3/4" keyway) NOTE: Measure before ordering. Use w/ ABC1812. Piston pump, parts ABC551 (RH) Hydraulic Pump Complete Valve Chamber Assembly Fits: 9N, 2N, 8N $100.75 ABC549 Replaces: 9N622 ABC551 Replaces: 9N621 Order # Price Description / Application FDS1919 $849.95 Piston Type Hydraulic Pump Replaces: NAA600D, NCA600C, NCA600F USA made NOTE: FDS1919 can replace your vane style pump when using piston style hydraulic manifold lines, not available at STP, Inc. FDS2236 $187.25 $24.95 Hydraulic Pump Safety Valve Assembly Fits: 9N, 2N, 8N (1939-52); NAA, Jubilee Replaces: 8N638, NAA984F $624.95 Hydraulic Pump Assembly w/ Relief Valve Fits: 8N Replaces: 8N605A STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm www.SteinerTractor.com Piston pump, parts cont... The following piston pump parts fit: Some NAA & Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000 4-cylinder series (thru 1964) Order # Price FDS438 $10.26 FDS333 $75.65 FDS1587 $11.25 Proof Meter Drive Bolt (For Vane & piston type hydraulic pumps) Fits: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF951A FDS437 $8.55 Hydraulic Piston Type Pump Shaft Bearing (For NCA600C or NCA600F pump) Replaces: 8A-1201C, D5NN1201A NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). FDS439 $5.80 Hydraulic Piston Type Pump Shaft Cup (For NCA600C or NCA600F pump) Replaces: 8A1202B, D5NN1202A NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). FDS334 $33.95 The following piston pump parts fit: Some NAA & Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000 4-cylinder series (thru 1964) FDS1262 FDS353 Ford: Chassis parts ABC156 $52.95 Hydraulic Piston Type Pump Gear Housing (For NCA600C or NCA600F pump) Replaces: NCA905C USA made NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Hydraulic Piston Type Pump Repair Kit w/ Plate Assy & Seal, Replaces: CCPN600A, CCPN600B (Services 1953 thru 1964 4-cyl. gas, diesel models using piston type pump NCA600C & NCA600F) NOTE: Piston type pump has replaced vane type pump in many early models. Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Description / Application O-Ring & Gasket Kit USA made NOTE: Kit includes: (2) - Main pump body gaskets; (1) - Pump mount gaskets; (1) - Pump body o-ring; (4) - Pump manifold o-ring; (1) - tach drive gasket. Hydraulic Piston Type Pump Shaft Replaces: NCA966E USA made NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Hydraulic Piston Type Pump Main Drive Gear, Replaces: C3NN908A USA made ABC200 $11.65 Needle Bearing Assembly (For Piston pump drive gear housing) Replaces: NCA881A, 36433 ABC201 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $8.50 Hydraulic Piston Pump Shaft Oil Seal Replaces: C5NN851A, Will replace NCA851A, D8NN851AA (1.000" I.D., 2.004" O.D., 0.531" W) 195 Ford: Chassis parts PTO parts www.SteinerTractor.com Order # Price ABC085 $4.50 Hydraulic lift cover repair gasket kits Order # Price Application Kits ABC089 ABC090 ABC431 $13.50 $9.60 Fits: 9N, 2N, 8N USA made NOTE: Kit includes: (2) valve chamber gaskets, (1) lift cover gasket, (1) pump base gasket, (2) inspection cover gasket, (1) cylinder to center housing cover gasket, (2) hydraulic lift cylinder housing gasket, (1) PTO gasket, (1) lift handle quadrant gasket, lift piston o-ring & back up washer. Fits: NAA, Jubilee (1953-54) NOTE: Kit includes: (1) lift housing to rear end gasket, (1) lift cylinder gasket, (1) lift piston o-ring & back up washer, (1) lift handle quadrant gasket, miscellaneous o-rings for lift cylinder. ABC313 ABC086 $1.00 $3.20 ABC566 $14.50 ABC140 $7.85 Hydraulic Lift Housing Gasket only Fits: 9N, 2N, 8N (1939-52) Replaces: 9N502 Conversion PTO assys. (1-3/8") ABC1501 $9.95 NOTE: The PTO Assemblies replace & convert 1-1/8" shaft to 1-3/8" spline. PTO shaft is assembled with oil seal, bearing, housing, cap, bearing retainer ring & gasket. Order # Price FDS216 $158.30 Application Fits: 9N, 2N, 8N (1939-52) Replaces: 9N70038 (1-3/8", 30-7/8" long) FDS217 FDS218 196 FDS015 $139.95 Fits: 600, 700, 800, 900 series (1954-64) except Select-O-Speed models Replaces: NCA70038, 310084 (32-11/16" long) NOTE: On some apps. may have to press thrust collar forward 1/4" to clear trans. seal. PTO Gasket (For 1-1/8" & 1-3/8" PTO) Fits: All Ford models (1939-64) except Majors; 2000, 3000 (both w/ 4 speed transmission) (1965 - 12/1970), Replaces: C5NN747A USA made PTO Cap (For 1-1/8" PTO) Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1957), Replaces: NCA726A (3-1/2" o/a length, 2-5/8" thread) NOTE: Cast iron. Original style. PTO Oil Seal fits: Ford models (1939 & up), 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000 series w/ 4, 6, 7, 8 speed transmission & Selecto speed, 3550, 4000, 2600, 3600, 4100, 4600, 2610, 3610, 4110, 4610 Replaces: 9N703B, 83944079 (2.45" O.D., 1-1/2" I.D., .650" wide) NOTE: For 1-1/8" & 1-3/8" PTO shafts. Seal may be narrower than original, but works fine. PTO Input Shaft Oil Seal Fits: 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700 (All w/ 7 or 8 speed transmission), Replaces: C5NN799A (1.565" O.D., 1.125" I.D., .250" wide) $99.95 PTO Shifter Support Housing Fits: 600, 800, 900, 2000, 4000 4-cyl. series (thru 1964) w/ 5 speed transmission Replaces: NDA770B $158.30 Fits: NAA, Jubilee (1953-54) Replaces: NAA70038 (30-3/16" long) PTO Knob Fits: Major Diesel, Power Major, Super Major, Replaces: EBB7213 (3/8"-24 NF) PTO Shaft Cover Cap Fits: 9N thru 4610 (1939-83); Will not fit 2910, 3910, Replaces: 310088 Gasket only ABC091 Description / Application MIS118 MIS138 Order # MFS1584 Price $1.95 $48.50 $48.50 PTO Over-Running Clutch (1-1/8 Female) Fits: Tractors up to 75 horsepower Replaces: Hub City C670F (1-1/8" - 6 x 1-3/8", 6 spline) PTO Over-Running Clutch (1-3/8" Female & Male) Fits: Tractors up to 75 horsepower Replaces: Hub City C660F (1-3/8" - 6 x 1-3/8", 6 spline) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Front Wheel Lug Nut Fits: Some 8N w/ 1-1/16" hex lug nut & 19" rim, Replaces: S9512A (1/2"-20 UNF, 1-1/16" hex head) NOTE: 12 used per tractor; Sold individually. FDS287 $0.95 FDS368 $6.50 EACH Front Wheel Lug Nut Fits: 9N, 2N (1939-47), Replaces: 9N1012 (1/2" - 20 UNF, 11/16" hex head) USA made NOTE: 10 used per tractor; Sold individually. FDS288 $4.80 EACH Front Wheel Stud Assembly w/ Nut Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (1947-56) (.559" shoulder dia.) NOTE: Stud (1/2" x 20 UNF) is exact of original. FDS286 $4.29 Front Wheel Stud only Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (1939-56) Replaces: C5NN1107E NOTE: Stud (1/2" x 20 UNF) is exact of original. ABC268 $1.50 Front Wheel Stud only Fits: 501 thru 981, 2000 thru TW30, Dexta (All w/ 2 wheel drive & regular front hub) (1957 & up), Replaces: C5NN1107F (1/2" - 20 UNF x 1-3/4" w/ serrated shoulder, 1.747" useable length) NOTE: 6 used per rim; Sold individually. $10.75 $9.95 Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000, 4-cyl. series (1954-64) Front wheel bolts, parts Price FDS285 $59.95 www.SteinerTractor.com Front wheel hub, parts cont... Order # Price Description / Application Front Wheel Hub Fits: 8N, NAA, Jubilee Replaces: 8N1104, NCA1104C Description / Application FDS1787 $19.95 Front Wheel Bearing Kit Fits the following w/ NCA1104A hub, (1954 -mid 1957) (up to SN 137818): 600, 700, 800, 900 series, Replaces: CBPN1200B (1.938" O.D. outer race) NOTE: 2 used per tractor; Sold individually. FDS1791 $19.50 Front Wheel Bearing Kit Fits the following w/ NCA1104B hub, 195764 w/ regular axle, NOT H.D. axle: 501 thru 4000, Replaces: CBPN1200C (1.781" O.D. outer race) NOTE: 2 used per tractor; Sold individually. ABC1310 $4.95 Front Wheel Bearing Seal Fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (1939-64) Replaces: NCA1190A, 9N1190B (2.684" O.D., 1.985" I.D., .322" wide) ABC553 $10.95 Front Hub Cap only Fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series, Dexta, Super Dexta (1939-64) (All w/ regular front axle not heavy duty axle) Replaces: 2N1139B, 957E1139 (2"-24 thread size, 1.670" tall) NOTE: Stamped steel. Exact of original. Front Wheel Lug Nut Serviceable for 9N - TW30 (1939 & up) Replaces: C5NN1012B (1/2" - 20 UNF, 13/16" hex head) USA made Front wheel hub, parts Order # Ford: Chassis parts Wheel clamp lock nut Fits: 9N thru 6000 (3/4"-16 UNF thread) Description Order # Price Front Wheel Clamp Lock Nut................................ ABC254...............$19.50 (For Axle Shaft & Front Wheel) NOTE: No re-threading necessary on worn shafts. Check size before ordering. What is back spacing? FDS295 $30.50 Front Wheel Bearing Kit Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) NOTE: Kit includes: (2) bearing cones, (2) bearing cups & (1) oil seal. 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com To determine back spacing lay your wheel flat on the ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8"). 197 Ford: Chassis parts Tires, tubes www.SteinerTractor.com NOTE: Tubes are for BIAS ply tires only, not for radial tires. Also not for recreational use. Need a tire or tube not Front wheels / rims NOTE: To determine the width of Wheels / Rims: Order # Price FDS071 $40.75 FDS220 FDS221 WHS022 WHS042 WHS070 WHS043 198 $131.50 Price Description / Application WHS047 $90.95 Triple rib, 6 ply, Tire only (5.50 x 16") Front Rim (Blank) Fits: 9N, 2N, 8N (1939-52) (3" x 19") USA made NOTE: Remove center from old rim & weld into new blank rim. WHS048 $105.75 Triple rib, 4 ply, Tire only (6.00 x 16") WHS049 $110.95 Triple rib, 6 ply, Tire only (6.50 x 16") WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires) FDS089 $68.95 Multi rib, 4 ply, Tire (4 x 19") FDS056TU $15.75 Tube only (For FDS089 Tire) WHS060 $37.95 EACH Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) $109.95 WHS059 $53.75 EACH Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS058 $56.55 EACH Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS061 $80.25 EACH Rear Tube only (For 13.6, 14.9 x 28" Tires) WHS062 $56.95 EACH Rear Tube only (For 9.5 x 32" Tires) $68.50 WHS063 $64.95 EACH Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $65.25 EACH Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $89.95 EACH NEW! Rear Tube only (For 12.00 x 38", 13.00 x 38", 13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38" tires) $65.60 $86.45 $78.25 Front Wheel (5 Bolt) w/ Large 9-5/8" Pilot Hole Fits: 9N, 2N (1939-47) Replaces: 9N1015A (3" x 19") Front Wheel (6 Bolt) w/ Small Center Fits: 8N (1947-52) Replaces: 8N1015A, C5NN1015A (3" x 19") Front Wheel (6 Lug) w/ (4) Wheel Weight Holes Fits: Some 8N thru 7910 series w/ 4.5" x 16" 6 lug rim Replaces: 8N1015D, 82006575, 87389515 (4.5" x 16", Pilot hole = 4.625", 6" bolt circle, 4" back spacing) USA made NOTE: For 5:50 x 6:00 x 16" tires. Front Wheel (6 Lug) Fits: Some 3230 - 7710 & others using 6" x 15" 6 lug rim, Replaces: 82006576, C5NN1007D (6" x 15", 6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made Front Wheel (6 Lug) w/ (4) Wheel Weight Holes Fits: Ford models, Replaces: 820050054, 86402377, D6NN1007B (8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back spacing) USA made Front Wheel (6 Lug) w/ (4) Wheel Weight Holes Fits: Some 2310 - 9700 & others using 6" x 16" 6 lug rim, Replaces: 82005056, C5NN1007A (6" x 16", Pilot hole = 4.625", 6" bolt circle, 4-3/4" back spacing) USA made Order # Price FDS1201 (Stud) $7.50 EACH listed? Call technical service. Order # Measure the inside (bead to bead) not outside to outside. Ford: Chassis parts Rear rim bolts, parts Description / Dimension FDS1211 (Nut) $1.15 EACH FDS394 (Stud) $1.65 EACH ABC386 (Nut) $1.30 EACH MIS061 $3.65 MIS063 $3.25 Description / Application Fits: 9N, 2N (1939-47) FDS1201 Replaces: 9N1117 (5/8"-15 NF thread, 1.875" o/a length) FDS1211 Replaces: 33806S7, 81871950 (5/8"-18 thread) USA made NOTE: 12 required per tractor; Sold individually. Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2600, 2610, 2810, 2910, 3000, 3610, 3910, 4000 4-cyl. FDS394 Replaces: 312696 (5/8"-18 thread x 1-5/8) USA made ABC386 Replaces: 8N1134 (5/8"-18 thread) NOTE: 16 required per tractor; Sold individually. For 2600-up check thread size. Rear Rim Bolt Assy. w/ Nut & Washer Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 3000, 4000 w/ 28" rear rims MIS061: (3-1/2" NC hex head bolt w/ washer) www.SteinerTractor.com Rear rims / wheels cont... Order # Price WHS1613 $235.95 $0.50 Flat Washer only (For MIS063) (5/8" I.D.) NOTE: Can also be used behind the lug nut on 9N & 2N. 6 needed per wheel; Sold individually. NOTE: Stop holes are angled. Order # Price WHS007 (12" x 26") $399.95 ACS028 (11" x 28") Order # Price ABC531 $5.15 EACH ABC384 ABC385 $5.15 EACH $1.40 EACH Description / Application ACS028 Replaces: C5NN1050H USA made NOTE: These are not PAD style rims. ACS026 (12" x 28") $420.00 WHS008 (13" x 28") $437.50 MIS108 $16.50 Rear Spinout Rim Stop (For 90° Drilled Rim Rail) Fits: Ford models (1965 & up) Replaces: E5NN1057BA USA made NOTE: Stop holes are angled. MIS109 $14.95 Rear Spinout Rim Stop (Parallel Drilled) Fits: Ford models (1965 & up) Replaces: C0NN1057A Rear Spinout Rim (4 Rails) Fits: Some 2000 3-cyl. - 4110 series (1965 & up), others Replaces: C5NN1050J USA made Rear Tire Inner Tube Valve (Air / Water Valve) (New Style) Fits: Tractor tubes w/ Internal threads NOTE: Sold individually. Rear Tire Inner Tube Valve (Air / Water Valve) (Old style) Fits: Tractor tubes w/ External threads NOTE: Sold individually. Brass Nut (For Rear Tire Inner Tube Valve) NOTE: Sold individually. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm NOTE: To determine the width of Rims / Wheels: Measure the inside (bead to bead) not outside to outside. Order # Price WHS016 (9" x 28") $141.00 WHS004 (10" x 28") $152.00 WHS012 (11" x 28") WHS013 (12" x 28") Description / Application Rear Rim (6 Loops) Fits: Some 9N thru 2000 series & others $162.35 WHS016 Replaces: NCA1020C, D9NN1050BA $172.60 WHS004 Replaces: NCA1020B, CONN1050F WHS012 Replaces: C5NN1050E WHS013 Replaces: D9NN1050EA NOTE: Back spacing on loops = 3-1/2" & 7-3/4". USA made Description / Application Rear Spinout Rim (4 Rails) Fits: Ford models (1965 & up) $399.95 WHS007 Replaces: C5NN1050H USA made NOTE: Stop holes are angled. Rear rims / wheels Rear tire inner tube valves, nut Flat Base Rear Rim (Blank Center) (For Stamped Steel 9 Bolt Pattern Rims) Fits: Ford models (10" x 38") USA made NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. Rear spinout rims, parts MIS063: (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: 6 used per rim; Sold individually. MIS121 Description / Application Rear Spinout Rim (4 Rails) Fits: Some 2000 3-cyl. - 4110 series USA made NOTE: Stop holes are angled. Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108). NOTE: Use MIS109 for the listed spinout rims. MIS110 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $8.95 Stop Bolt (For Rear Spinout Rim Stops) Replaces: C0NN1058A, 81811263 USA made NOTE: Sold individually. 199 Ford: Chassis parts www.SteinerTractor.com Order # FDS305 Price Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 4-cyl. series (1947-64); 3000 (1965 & up), Replaces: 8N1132A2 (1-1/16" hex, 5/8"-18 UNF x 2.650) Description Order # Clevis Pin w/ Lynch Pin Fits: Same as FDS208 Replaces: 8N804 ABC2271 $8.95 Price Rear Wheel Flange Nut........................................... FDS118............... $11.00 NOTE: Used to add pie weight plate or to "Direct Dual." FDS302 $163.00 Mounting wedge Fits: 8N, NAA, Jubilee, 501; 600, 700, 800, 900, 2000, 3000 w/ conventional 6-loop rims not spin out rims Description Order # Price Mounting Wedge (For Rear 3-Piece Weight)....... FDS150............... $8.50 NOTE: 6 needed per wheel; Sold individually. Description / Application $4.90 Rear wheel flange nut FDS306 Swinging Drawbar Bolt Kit Fits: 9N thru 4000 series (4-cyl.) (1939-64) NOTE: Includes 8 bolts & lock washers. Fits FDS208 & FDS302 Assys. Swinging Drawbar Assembly w/ Hanger/Bracket & Clevis Assembly Fits: 800, 1801, 4000 series 4-cyl. (thru 64) except Row Crop & Grove NOTE: Mounting bolts sold separate, order # ABC2271. Order # Price FDS023 $23.50 FDS346 $37.95 FDS159 $69.95 FDS208 FDS306 Price Description / Application $129.90 Swinging Drawbar Assembly w/ Hanger/Bracket & Clevis Assembly Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 601, 2000 4-cyl. series (thru 64) except Row Crop NOTE: Verify that 9N’s rear end housing has (4) tapped holes under the rear end housing before ordering. Mounting bolts sold separately, order #ABC2271. FDS304 $59.50 Hanger / Bracket Fits: Same as FDS302 Replaces: NDA809A ABC435 Clevis w/ Pin Fits: Same as FDS302 Replaces: NCA803B USA made Swinging Drawbar Fits: Same as FDS208 Replaces: C0NN805F, 86531346 FDS303 FDS305 $52.55 Hanger / Bracket Fits: Same as FDS208 Replaces: NCA809A ABC435 FDS022 $44.95 FDS211 Standard Drawbar Category 1 Fits: Ford models Replaces: 9N5182A (1" x 2-1/2" x 26", 7/8" pin size) $3.25 Category 1 3-Point Top Link Pin Fits: Ford models w/ a Category 1 3-point hitch (3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length) Drawbar Lock Category 1 (For FDS022) Replaces: 9N5182L STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Category 2 3-Point Top Link Pin Fits: Ford models w/ a Category 2 3-point hitch (1" O.D., 4-1/4" usable length, 6" o/a length) ABC1429 $4.25 MIS119 $0.35 ABC1433 $2.15 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing Fits: Ford models w/ a Category 2, 3-point hitch switching to a Category 1, 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) FDS028 $79.95 3-Point Leveling Box Assembly Fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta, Replaces: 8N577A (Closed length = 17-1/2" - top pin to bottom pin) FDS367 FDS475 $29.99 Top-Link Bracket (Hydraulic Lift Rocker) Fits: 8N, NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. (1947-64), Replaces: NCA535A (drilled for 1" pivot pin) USA made NOTE: Measure pivot pin before ordering. ABC1427 Clevis Pin w/ Lynch Pin Fits: Same as FDS302 Replaces: 8N804 $48.80 Clevis w/ Pin Fits: Same as FDS208 Replaces: NCA803B USA made 200 $4.90 Top-Link Category 2 Adjustable w/ forged ends & 1" hole Fits: Ford models (16-3/4" tube length) 3-Point Top-Link Pin Fits: Ford models w/ a Category 1, 3-point hitch (3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length) $48.80 $55.00 Top-Link Category 1 Adjustable w/ forged ends & 3/4" hole Fits: Ford models (16" tube length) $1.90 $55.00 Swinging Drawbar Fits: Same as FDS302 Replaces: C0NN805F, 86531346 Description / Application ABC1431 Drawbars, parts Order # Ford: Chassis parts 3-point hitch parts Drawbars, parts cont... $24.75 $83.85 3-Point Lynch Pin Fits: Ford models equipped w/ a 3-point hitch using a .420" dia. pin Replaces: 87299410 (1-5/8" usable length) Fork (For FDS028) Fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta, Replaces: 9N585A (9-3/4" o/a length, 3/4" UNC thread, 1/2" between ears) www.SteinerTractor.com 3-point hitch parts cont... Order # Price FDS219 $49.95 LH Leveling Rod Fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta, Replaces: 9N564B (19" c.c. pin holes) FDS392 $94.95 3-Point Leveling Box Assembly Fits: 600, 800, 1801, 2000, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000 4-cyl., 4110 series Replaces: NCA577A, NCA585B, E0NN569AA (21-3/4" to 25" total adjustment) FDS350 $3.75 3-Point Leveling Box Pin (For FDS028, FDS219, FDS392) Fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series, Dexta, Super Dexta (thru 64) Replaces: 9N595 (2-3/4" useable length x 5/8" dia.) USA made ABC302 $7.75 Eyelet Assembly Kit w/ Nut & Lock Washer (For Sway Chain) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, Dexta, Super Dexta, 1801, 2000, 3000, 3600, 3610, 4000 4-cyl. series, Replaces: NCB660A USA made NOTE: Kit includes: Eyelet assembly, nut & lock washer. FDS274 $44.55 Drawbar Check Chain Kit fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, Dexta, Super Dexta, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000 4-cyl. series NOTE: Kit includes: RH / LH anchors, (2) eyelets, (2) chains, (4) clevis w/ pins & hardware. FDS206 $57.95 3-Point Lower Lift Arm Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N555, 9N556 ( Lower lift arm w/ forged ball-joint ends, Category 1 accommodates 7/8" drawbar or lower link pins, 32" hole centers) NOTE: Red primer. FDS383 (LH) $93.30 FDS386 (RH) Outer Hydraulic Lift Rockshaft Arm Fits: 9N thru Jubilee; Serviceable for 501 thru 4000 4-cyl. (1939-64) Replaces: 9N543B (1.80" I.D., 37 splines) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $93.30 Description / Application 3-Point Lower Lift Arm Fits: 501, 600, 700, 800, 900, 1801, 2000 (3 & 4-cyl.), 2310, 2600, 2610, 2910, 3000, 3600, 3610, (4000 4-cyl. series) (1954 & up) FDS383 Replaces: D0NN555C, C5NN556AF FDS386 Replaces: D0NN555D, C5NN555AN (Category 1 - accommodates 7/8" drawbar or lower link pins, 31-5/8" c.c. ball) 3-point hitch parts continue on next page 201 Ford: Chassis parts Ford: Miscellaneous www.SteinerTractor.com www.SteinerTractor.com 3-point hitch parts cont... Order # FDS2059 FDS465 FDS462 ABC2010 FDS024 Price $1.45 $28.95 $25.15 $22.95 $67.20 Mylar decals - USA made cont... Order # Price DEC405 $25.00 661 Workmaster DEC389 $20.00 661 Select-O-Speed DEC408 $30.00 671 Select-O-Speed DEC347 $12.75 740 (1954-57) & painted. Paint must be completely dry prior to installation DEC437 $25.00 741 Workmaster (usually 3 - 4 weeks). Wash area with soap & water (new paint DEC410 $25.00 included) on which decal is to be placed. 771 Select-O-Speed DEC444 $57.15 800 (1954-57) NOTE: Does not include Powermaster or Workmaster decal. Mylar decals - USA made (Unless otherwise noted): Description / Application Lower 3-Point Pin Support Plate Gasket Fits: 9N SN: 6019 & up, 2N (mid 1939 - 47) Replaces: 9N523B USA made NOTE: Mounts under axle housing. 2 used per tractor; Sold individually. INSTRUCTIONS: Have the pitted area filled, sanded smooth 3-Point Lower Lift Arm Support Pin w/ Nut, Washer & Cotter Key Fits: 9N, 2N (1939-47) Replaces: 9N563 of design where possible prior to removing white backing paper. 3-Point Lower Lift Arm Support Pin Fits: 8N, NAA, 501, 600, 700, 800, 900, 1801, 2000 3 & 4-cyl., 3000, 3600, 4000 3 & 4-cyl., 4600 (1947-81) (All w/out differential lock) Replaces: NCA563C USA made FOR MYLAR DECAL (FILM BETWEEN LETTERING): Trim to border Lightly spray the area with window cleaner (do not use window DEC335 $12.75 800 DEC446 $68.50 801 - 861 series (1958-62) NOTE: Includes Powermaster decals. puncture with pin & smooth down. Please note: These decals DEC295 $21.00 have b een printed on a tough mylar film using mylar ink. A 801 Powermaster DEC363 $30.00 801 Select-O-Speed DEC391 $25.00 841 Diesel DEC300 $21.00 841 Powermaster DEC337 $12.75 850 DEC297 $21.00 851 Powermaster DEC346 $12.75 DEC393 cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 27-1/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually. Stabilizer Kit fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 3-cyl. & 4-cyl., 3000, 4000 4-cyl. series Category 1 (Red Primer) (Flat bars not turnbuckles) NOTE: Kit includes: (2) arms, (2) brackets & pins. pressure sensitive adhesive has been employed on the back of the mylar to i nsure good adhesion to any clean, hard surface. C AUTION: Inspect all decal pieces before applying to tractor. NO REFUNDS on mylar decals if applied to surface and/or if damaged. NO REFUNDS on vinyl cut decals. Store in a cool, dry place. Do not soak in water. DEC292 Order # Price DEC292 $2.00 DEC232 DEC393 DEC194 Application Ford Script decal (1-Piece) (1-3/4" tall x 7" long) $26.50 10-Piece Complete warning & misc. decals, including hood & fender decals 9N, 2N, 8N (1939-52) Deluxe tractor umbrellas Four oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform. Application 9-Piece Complete Set w/ decal placement instructions NAA, Jubilee (1953-54) DEC442 $45.75 DEC388 $21.00 501 Offset Workmaster DEC362 $21.00 541 Offset Workmaster DEC332 $12.75 600 DEC443 $57.15 600 (1954-57) NOTE: Does not include Powermaster or Workmaster decal. are authentic manuals that deal with repairs in the language of a mechanic with an easy to use format. They include valuable information as to specifications, torques, etc. illustrated by exploded views and photos. If you are in serious repairs or restoration, you need an I & T Shop Service™ Manual. It will offer many short cuts and save you time! FO4 Order # FO19 FO20 Price FO31 FO42 Application FO19 $31.95 $25.00 861 Diesel NAA FO20 $31.95 DEC360 $21.00 861 Powermaster DEC365 $30.00 871 Select-O-Speed Series 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. NOTE: Includes electrical wiring diagram. DEC404 $30.00 881 Select-O-Speed FO31 $31.95 DEC348 $21.00 901 Powermaster Series 2000 3-cyl., 3000 3-cyl., 4000 3-cyl. (Covers models prior to 1975) NOTE: Includes electrical wiring diagram. DEC342 $21.75 960 FO42 $31.95 DEC361 $21.00 961 Powermaster DEC364 $30.00 971 Select-O-Speed Series 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 NOTE: Includes electrical wiring diagram. DEC396 $30.00 981 Select-O-Speed FO201 $34.95 DEC399 $25.00 961 Diesel DEC429 $25.00 2000 (before 1965) DEC193 $29.95 2000 (1965-68) 3-cyl. DEC197 $28.75 2000 (1968 & up) 3-cyl. DEC201 $28.75 2600 (1968 & up) DEC194 $29.95 3000 (up to 1968) Ford Collection: Models Fordson Dexta, Fordson Super Dexta, 2000 Super Dexta, New Performance Super Dexta, models Fordson Major diesel (FMD), Fordson Power Major (FPM), Fordson Super Major (FSM) New Performance Fordson Super Major (New FSM), 5000 Super Major, series 6000, Commander 6000, series 1000 & 1600, series 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30 DEC198 $28.75 3000 (1968 & up) DEC430 $25.00 4000 (before 1965) DEC195 $30.60 4000 (1965-68) 3-cyl. DEC199 $28.75 4000 (1968 & up) DEC451 $8.95 $21.00 601 Workmaster DEC333 $12.75 640 Blue Deluxe Umbrella w/ Brackets ...................... ABC2366............ $174.95 DEC299 $25.00 641 Workmaster DEC196 $28.20 5000 (up to 1968) White Deluxe Umbrella w/ Brackets ................... ABC2362............ $174.95 DEC334 $12.75 DEC200 $28.75 Red Deluxe Umbrella w/ Brackets ....................... ABC2357............ $174.95 650 5000 (1968 & up) DEC344 $12.75 660 (1954-57) DEC211 $53.00 7000 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm apart, how to fix it and how to put it back together again. These 860 (1954-57) DEC338 202 An I & T Shop Service™ Manual tells you how to take a tractor 9N, 2N, 8N NOTE: Includes electrical wiring diagram. 601 series (1958-62) NOTE: Includes Workmaster decals. Price I & T Shop Service™ manual - Printed in USA $31.95 $68.50 Order # www.SteinerTractor.com FO4 DEC445 Description Ford: Miscellaneous Transmission Shift Pattern decal (1-piece) For Ford models Replaces: C5NN7B292 (3-15/16" x 5-1/4") STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com FROM OUR CUSTOMERS! Thank you for your most recent e-mail promotion of free shipping Nice to know there is a person on the other end of the transaction :-) - Ken S. 203 Ford: Miscellaneous Service / Operator's manual reprints cont... www.SteinerTractor.com Order # Price Application Service / Operator's manual reprints A Service Manual Reprint tells you how to take the tractor apart, how to fix it and how to put it back together again. It is a reprint $15.00 9N, 2N (1939-47) NOTE: Includes electrical wiring diagram. REP1446 $18.95 9N, 2N NOTE: This manual explains basic tractor operation, Ferguson system, 21 different Ferguson implements & accessories. of the manual that the factory furnished the dealer’s shop service department, and was not sent or given to individual retail customers. It deals with repairs in the language of a mechanic. Often times it includes valuable information as to specifications, torques, etc. A service manual reprint will offer many short cuts and save you time! An Operator’s Manual (reprints only) sometimes referred to as the Owner’s Manual is the manual that came with the tractor. It is the manual that was given to the ultimate consumer by the manufacturer. It can be compared to the manual you receive in the glove box of a new car. This manual gives the owner-operator BOK064 REP1142 REP1146 distributor, oil and filter change, brake NAA (1953-54) $14.95 600 series, 800 series gas, LP w/ 4 or 5 speed transmission (1954-57) Hydraulic repair video - USA made REP1679 $14.95 601 series, 801 series gas, LP w/ 4 or 5 speed transmission (1958-62) hydraulic problems and shows how to REP1685 $14.95 700, 740, 900, 950, 960 gas, LP w/ 4 or 5 speed transmission (1954-57) REP1683 $14.95 701 series, 901 series gas, LP w/ 4 speed or Select-o speed transmission REP1369 $14.95 2000 3-cyl., 3000, 4000 3-cyl., 5000 (1965 & up) All Purpose & LCG NOTE: Gas, diesel REP1342 $42.90 Ford/Dearborn Farm Equipment (Beginning in 1939) NOTE: This manual contains almost 900 pages of assembly, operations, part numbers, and maintenance! REP087 numbers, for ordering parts, and makes you seem much more REP1369 Includes rebuilding the carburetor and $15.00 on assembly and disassembly. It also gives you a guide, with REP1685 Tune-up video - USA made REP1681 on the tractor. With numbered pictures giving you great detail REP1681 and then rebuilt step by step is an easy format. BOK062 A Parts Manual (reprint only) has exploded views of all parts BOK040 disassembled down to the bare block 8N (1947-52) NOTE: Includes electrical wiring diagram. Parts manual reprints - Printed in USA BOK061 www.SteinerTractor.com $15.00 useful and valuable tool in operating your tractor. BOK063 Shows how to completely rebuild the BOK040 instructions, shift patterns, capacities (anti-freeze, crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very Ford: Miscellaneous tractors' engine. You will see the engine Operator's manual reprints BOK061 Engine rebuild video - USA made informed when talking with a dealer. Many service manuals, after adjustment and more! Will help determine what is causing FROM OUR CUSTOMERS! make the necessary repairs or completely rebuild the round, piston type, hydraulic pump. VHS Videos are on CLOSE OUT and may be unavailable. D = DVD (Replacing the VHS videos) Order # Price VID01D $20.00 9N, 2N, 8N (Engine Rebuild) VID04D $20.00 NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. (Engine Rebuild) VID02D $20.00 9N, 2N, 8N (Tune-Up) VID05 $18.00 VID05D $20.00 VID03D $20.00 Fits: 9N, 2N, 8N; Ferguson 20, 30 series (Hydraulic Repair) VID18D $20.00 NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. (Hydraulic Repair) Parts arrived today on rural delivery I am very pleased with the speed of delivery and your usual efficiency. Thank you - Noel H. Application NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. (Tune-Up) telling you how to disassemble & repair in detail, will simply say "reassemble". If you have your PTO in the wash tank, in pieces, Order # Price Application Service manual reprints BOK063 $18.00 9N, 2N (1939-47) NOTE: Includes electrical wiring diagram. BOK064 $15.00 8N (1947-52) NOTE: Has very limited information on engine service. REP1142 $14.75 NAA, Jubilee REP1146 $24.30 600, 601, 700, 701, 800, 801, 900, 901, 1801 series gas, LP, diesel NOTE: Includes electrical wiring diagram. REP087 $34.95 Sherman Transmission Over-Under, Reversing, Live PTO REP1139 $14.75 Fordson Major 204 without notes, you have a problem. The parts manual can help you out with an exploded view of the PTO unit, and you can see immediately how it all goes back together. You need a parts manual! BOK065 Order # Price BOK065 $20.00 BOK1313 $29.95 BOK1313 Application 9N - Jubilee (1939-54) NAA, 501, 600, 700, 800, 900, 1801 (1953-59) gas, diesel, LP STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm "But I don't wanna choose..." Maybe instead of favorite manufacturer, we should simply pick our favorite color. If you like RED, you're a Ford and Farmall fan. If you like GREEN, you’re a John Deere and Oliver fan. Color plays such an important part in any restoration project. It's so hard to choose when all these tractors have their own personalities and histories. That's what truly makes restoring these beauties so much FUN! And yes, that's a Steiner's parts catalog on the roller mechanics seat in the picture. - Shawn Alfonsi, Ogden, UT STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 205
Similar documents
A brief history about Ford
seal, bearing, gasket kit..............184
throw out bearing carrier..........183
throw out bearings......................183
torque limiter disc........................183
Countershafts......
Ford 4 - Steiner Tractor Parts
screen................................................. 173
shut off valves.................................. 173
tanks...........................................172, 173
Fuse holder..............
Four Generations - Steiner Tractor Parts
shafts...........................................245
Bull Pinions....................................266
springs........................................245
Bumper, Front Axle Rubber.........254...
Case - Steiner Tractor Parts
bearing & bushing sets............... 72
camshaft.......................................... 72
lifter................................................... 72
Caps
air cleaner......................
Allis Chalmers - Steiner Tractor Parts
Carburetors, parts cont...
elbow strainer assy.............................17
floats.................................................17, 18
gaskets.................................................
Minneapolis Moline - Steiner Tractor Parts
riveting tools.....................................535
spring...................................................535
C
Caps
air cleaner...........................................528
distributo...
Minneapolis Moline - Steiner Tractor Parts
straightening tool.........................557
webbings..........................................557
Fuse holder.........................................545
G
Gauge panel...........................
Minneapolis Moline - Steiner Tractor Parts
adjusting needle assys.................. 533
bushing............................................... 534
discs............................................533, 534
elbow / strainer assy...........
Case 2 - Steiner Tractor Parts
Caps.. 73 - 74, 76, 79, 84, 86, 91, 92, 94
air cleaner...................................... 91, 92
distributor............................................84
fuel..................................
