docA brief history about Ford
download 
Report Transcription
A brief history about Ford
Ford Ford: Alphabetical index A brief history about Ford Ford "My 4 kids sitting on my 8N" John Nussabaum, Fort Wayne, Indiana Customer submitted photos Thanks for giving us your best shot! The following photos were submitted by folks just like you in our annual catalog photo contest. Our complete album can be viewed at http://www.steinertractor. com/tractor-photo winners.html. View more pictures and tractor stories in our digital books on our web site under "Steiner Community." "1949 Ford 8N" Alan Pearce, South Hill, Virginia "Ford in full bloom" Jerusha Kennealy, Eagan, Minnesota 140 "1952 Ford 8N after a 4 year restoration" Eric Del Ponte, West Bend, Wisconsin "The mighty Ford 801" Rhett Wadsworth, Beech Island, South Carolina STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm A Air cleaner assembly, part assy....................................................178 bolt kit...............................................178 cap......................................................178 clamps......................................178, 179 filter element..................................178 gasket................................................178 hoses.................................................179 oil cups.............................................178 spring clip........................................178 tubes..................................................179 vacuator valves..............................179 Alternators, parts alternators.......................................169 bolt kit...............................................169 bracket..............................................169 bracket kits.............................169, 170 conversion kits......................169, 170 mounting kits.................................169 pulleys...............................................169 Amp gauges.......................................160 Axle, parts axle shaft..........................................194 clamp lock nut...............................194 front axle support pins...............189 front pivot bushing......................189 gaskets..............................................195 nuts....................................................194 paper gaskets / shims..................194 rear axle nut and snap ring kit.194 rear hub assy..................................194 seals...................................................195 shaft collar.......................................195 shaft cone........................................195 shaft cup..........................................195 snap ring..........................................194 studs..................................................194 washer..............................................194 B Base engine kits................................146 Battery cables....................................163 Battery covers....................................163 Battery hold downs, parts bolts...................................................164 hold downs............................163, 164 retainer.............................................164 rod......................................................164 Battery trays.......................................163 B Bolts.......158, 164, 169, 176, 177, 178, . 181, 190, 191, 198, 201, 202, 204 Boots............................................185, 189 Brake parts backing plate..................................193 bonded brake shoe......................193 bonded brake shoe sets.............193 brake adjusting hole cover........193 disc brake ball................................193 dust shield.......................................193 felt seal..............................................193 lining set..........................................193 parking brake lever......................193 repair kits.........................................194 riveting tools..................................193 screw.................................................193 springs..............................................193 C Camshaft, parts camshaft..........................................148 gears..................................................148 lifter....................................................148 Caps air cleaner........................................178 distributor........................................166 front hub..........................................200 fuel.....................................................180 oil fill / breather....................150, 151 oil filler tube....................................151 power steering...............................188 pre cleaner......................................179 PTO.....................................................199 radiator.............................................158 rain.....................................................153 steering wheel...............................185 Carburetors, parts adjustment needle assy.............154 bushing............................................154 carburetors......................................154 discs...................................................154 elbow strainer assy.......................154 floats..................................................155 gaskets..............................................155 needle float valves........................154 nozzles..............................................154 repair kits................................155, 156 throttle shaft...................................154 venturi...............................................154 Choke parts cables................................................153 knob..................................................153 rod......................................................153 Cigarette lighters..............................165 Cluster gauges, parts assemblies.......................................162 cable..................................................162 C Cluster gauges, parts cont... gasket................................................162 sending unit....................................162 switch................................................162 Clutch, trans. parts alignment tool...............................183 bearing spring...............................183 bearings...........................................183 cable..................................................184 control selector cover..................183 control selector lever...................183 disc.....................................................182 drain plugs......................................183 gasket................................................183 input shaft retainer......................183 kits.............................................182, 183 seal.....................................................184 seal, bearing, gasket kit..............184 throw out bearing carrier..........183 throw out bearings......................183 torque limiter disc........................183 Countershafts....................................184 Crankshafts, parts bearings..................................149, 150 crankshafts......................................148 gears..................................................148 pulleys...............................................148 seals...................................................148 Cylinder head, parts cylinder head.................................147 stud....................................................147 valve train kits................................147 D Dash light, parts bulbs..................................................173 dash lights.......................................173 Dash panel warning lights............160 Data plates..........................................186 Decals...................................................205 Differential side cover gasket.......194 Dipsticks..............................................151 Distributor parts bracket..............................................165 breaker plate assy.........................166 bushing and shim kit...................166 caps....................................................166 clips....................................................166 coils....................................................165 distributors......................................166 dust cover........................................165 gasket kit..........................................166 grommet..........................................167 ignition tune up kits............167,168 primary conductor.......................166 resistor..............................................165 retainer.............................................167 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com D Distributor parts cont... retaining wire.................................165 rotor buttons..................................168 shaft...................................................166 spark plug wire sets............166, 167 spark plugs......................................167 spring clip........................................166 Drawbars, parts assys...................................................203 bolt kit...............................................204 bracket..............................................202 bushing............................................204 chain kit............................................204 clevis..................................................203 drawbars.................................203, 204 eyelet assy kit.................................204 fork.....................................................203 gasket................................................203 hanger..............................................203 leveling box assys.........................203 leveling rod.....................................203 lift arm support pin kit................203 lift arms.............................................203 lock.....................................................204 pins...........................................202, 203 rockshaft arm.................................202 stabilizer bar...................................204 stabilizer kit.....................................204 top links............................................202 DVDs.....................................................207 E Electric outlet socket, parts boot...................................................163 connector plug..............................163 socket................................................163 Electrical resistor assys., parts assys...................................................168 junction block................................168 resistor..............................................168 Emblems / nameplates bracket..............................................175 clip......................................................175 emblems..........................................175 Engine assy., break in lube............148 Engine gasket sets..................146, 147 Engine oil caps.........................150, 151 Engine overhaul kits........................146 Exhaust pipes.....................................153 F Fan belts...............................................159 Fan blades...........................................159 Fan shrouds, parts fan shrouds.....................................159 screw kit...........................................159 Index continues on next page 141 Ford Michigan is the birthplace of the modern automobile and Henry Ford was the first to perfect the modern assembly line. The 9N & 2N Ford tractors designed by Harry Ferguson were highly innovative, with other tractor manufacturers eventually adopting Ferguson's three point hitch weight transfer system. We carry a wide variety of tractor parts for old Ford tractors. Whether you want to repair or restore your classic, we have the tractor parts you need! Ford: Alphabetical index cont... Fenders, parts assys...................................................192 bolt kits.............................................191 light brackets..................................192 painting mask kit..........................192 rivet....................................................192 skins..........................................191, 192 Flywheel ring gear...........................151 Front bumper, part bolt kit...............................................176 bumper.............................................176 Fuel filters element............................................182 fuel filters.........................................181 Fuel gauges........................................161 Fuel lift pump.....................................157 Fuel lines..............................................182 rubber bumper..............................182 Fuel sending units............................161 gaskets..............................................161 ring.....................................................161 Fuel tanks, parts caps....................................................180 gasket................................................180 screen................................................180 shut off valves................................180 tanks..................................................180 Fuse holder.........................................165 G Gauges amp....................................................160 cluster gauges................................162 fuel.....................................................161 oil pressure.............................160, 161 water temperature.......................162 Gear shift boot...................................185 Gear shift knobs................................185 Gear shift lever, parts boot...................................................185 decal..................................................184 gaskets..............................................184 knobs.................................................185 levers.................................................184 pin......................................................184 shift cover assy...............................184 shifter plate.....................................184 spring................................................184 Gears camshaft..........................................148 crankshaft........................................148 flywheel ring...................................151 main drive........................................198 steering gear sectors...................186 Generators, parts cut out assy.....................................168 generators.......................................168 142 G Generators, parts cont... pulleys...............................................168 tag......................................................168 Governors, parts assemblies.......................................157 gaskets..............................................157 mount...............................................157 repair kits.........................................157 springs..............................................157 Grilles, parts bottom grille sections........176, 177 bumper kit.......................................176 grilles........................................176, 177 mounting studs.............................176 screen................................................176 shell....................................................176 spring................................................177 stud and knob................................177 top grille section...........................176 upper grille assy............................176 H Hand cranks........................................175 Headlights, parts bezels................................................172 bracket..............................................172 bulbs..................................................172 headlights........................................172 reinforcement plate.....................172 rings...................................................172 washer..............................................172 wings.................................................172 Hood, parts air cleaner funnel assy.................178 air cleaner grille doors................178 bolt kits.............................................177 bumpers..................................177, 178 door...................................................177 door handle....................................178 door hinge.......................................178 hood..................................................177 ornament.........................................177 screen................................................178 screw kit...........................................177 side panels......................................177 spring................................................178 Hydraulic lift parts cover block off plate....................195 cover repair gasket kits...............196 cylinder.............................................196 cylinder safety valve....................196 draft control plunger...................196 gasket................................................196 hydraulic valve adaptor..............195 lever control friction disc...........196 lever control friction plate.........196 lift piston..........................................196 H Hydraulic lift parts cont... o-ring.................................................196 oil level dipsticks...........................196 quadrant stop kit..........................195 ring kit...............................................196 washer..............................................196 Hydraulic pump parts assembly..........................................197 control valve assy..........................196 drive hub adaptors.......................197 drive shafts......................................197 rebuild kit........................................196 safety valve assy............................197 valve chamber assys....................197 M P Mufflers cont... heat shield.......................................153 mufflers............................................152 Pre-cleaner parts bowls.................................................180 caps....................................................179 caps assys........................................179 covers................................................180 PTO parts caps....................................................199 conversion assys...........................198 gasket................................................198 knob..................................................198 over-running clutches.................199 seals...................................................199 shifter support housing..............199 Pushrod................................................147 gasket................................................147 grommets........................................147 N Nosecone............................................177 I Ignition parts bracket..............................................165 O Oil / breather caps............................150 filter element..................................150 vent breather element................150 vent breather gasket...................151 Oil fill tube cap..................................151 Oil filters...............................................151 Oil pan parts drain plug........................................151 drain plug screen..........................151 gaskets..............................................151 bushing and shim kit...................166 caps....................................................166 clips....................................................166 coils....................................................165 distributors......................................166 dust cover........................................165 gasket kit..........................................166 grommet..........................................167 primary conductor.......................166 Oil pressure gauges, parts copper line kit................................161 fittings...............................................161 gauges.....................................160, 161 Oil pump parts pickup tube.....................................150 plunger.............................................150 spring................................................150 Oil pump repair kits.........................150 resistor..............................................165 retainer.............................................167 retaining wire.................................165 rotor buttons..................................168 shaft...................................................166 spark plug wire sets............166, 167 spark plugs......................................167 spring clip........................................166 tune-up kits...........................167, 168 Ignition/key switches......................171 K Knobs....................................................185 L Light switches....................................171 M Manifolds, parts elbows...............................................145 gasket material..............................145 gaskets..............................................145 hardware..........................................145 manifolds.........................................145 washer kit........................................145 Manuals.......................................206, 207 Mufflers adaptor.............................................153 bracket..............................................152 clamps...............................................152 P Pinion shaft seal................................194 Piston pump, parts bearing.............................................198 changeover plate..........................197 cup.....................................................198 gasket kit..........................................198 gear housing..................................197 hydraulic pump.............................197 main drive gear.............................198 manifold (lines)..............................197 needle bearing assy.....................198 oil seal...............................................198 proof meter drive adapter shaft..... .............................................................198 proof meter drive bolt................198 proof meter drive bushing........198 repair kit...........................................197 shaft...................................................198 valve seat tools..............................198 Piston ring sets..................................146 Power steering parts cap......................................................188 cylinder end....................................188 cylinders...........................................188 filter....................................................187 pulley................................................187 pumps...............................................187 seal and o-ring kit.........................187 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm R Radiator, parts bolt kit...............................................158 caps....................................................158 clamps...............................................158 drain plug........................................157 hood pad.........................................157 hoses.................................................158 mounting pad................................158 radiators...........................................157 Radius rod parts ball cap.............................................188 ball socket.......................................188 Raincaps...............................................153 Rear end overhaul gasket kit........194 Rims, rear and front bolts...................................................202 inner tube valves...........................201 nuts...........................................201, 202 rear rim bolt assys.........................201 rims.........................................200 - 202 stops..................................................202 studs..................................................201 washer..............................................201 Running boards, parts brackets............................................192 hardware kit....................................192 running boards..............................192 supports...........................................192 S Seats, parts adjustment handle.......................191 assy....................................................190 bearing.............................................191 bolt.....................................................190 bumper.............................................190 bushing and pin kit......................191 bushings..........................................190 coil......................................................190 S Seats, parts cont... hinge.................................................190 pads...................................................191 pan repair kit..................................190 pans...................................................190 retaining clip..................................190 shock absorbers............................190 springs..............................................190 support rod.....................................190 Sediment bowl assys., parts bail assys..........................................181 bolts...................................................181 gaskets..............................................181 glass bowls......................................181 screens..............................................181 sediment bowl assys....................181 Sleeve and piston kits.....................146 Spark plug wiring sets...........166, 167 Spark plugs.........................................167 Spindle parts bearing.............................................189 bushing............................................189 bushing kit......................................189 seal.....................................................189 Starter hand cranks..........................175 Starters, parts covers................................................170 drives.................................................170 key......................................................171 repair studs.....................................170 starter solenoids............................170 starters..............................................170 switches............................................171 tags....................................................170 Steering parts bushings..........................................186 column grommets........................186 gear boxes.......................................187 gear sectors............................186, 187 seals...................................................187 sector hardware and seal kit.....187 sectors...............................................186 shaft...................................................186 shaft bearing kits.................186, 187 top bearing steering shaft kit...187 Steering wheels, parts cap......................................................185 center caps / emblems................185 cover..................................................186 nuts....................................................185 plates.................................................186 spinner..............................................185 steering wheels.............................185 washers.............................................185 T Tachometers cables........................................162,163 tachometers............................162,163 Tail lights, parts brackets............................................174 bulbs.........................................173, 174 gaskets..............................................174 lens............................................173, 174 ring.....................................................174 tail lights...........................................173 Thermostats, parts gasket................................................159 thermostats............................158, 159 Three point hitch parts bolt kit...............................................204 bracket..............................................202 bushing............................................204 clevis..................................................203 drawbar chain kit..........................204 drawbars.................................203, 204 eyelet assy kit.................................204 fork.....................................................203 gasket................................................203 hanger..............................................203 leveling box assys.........................203 leveling rod.....................................203 lift arm support pin kit................203 lift arms.............................................203 lock.....................................................204 pins...........................................202, 203 rockshaft arm.................................202 stabilizer bar..........................204, 205 stabilizer kit.....................................204 top links............................................202 Throttle parts grommet..........................................182 lever...................................................182 linkages............................................182 plates.................................................182 rod......................................................182 screw kit...........................................182 washer..............................................182 Tie rods, parts assys...................................................188 boots.................................................189 ends..........................................188, 189 Timing gear cover gaskets............148 Tires, tubes nut......................................................201 tires....................................................201 tubes..................................................201 valves................................................201 Toolboxes...................................192, 193 Top-links, parts pins....................................................202 Transmission, clutch parts alignment tool...............................183 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com T Transmission, clutch parts cont... bearing spring...............................183 bearings...........................................183 cable..................................................184 control selector cover..................183 control selector lever...................183 discs...................................................182 drain plugs......................................183 gasket................................................183 input shaft retainer......................183 kits.............................................182, 183 seal.....................................................184 seal, bearing, gasket kit..............184 throw out bearing carrier..........183 throw out bearings......................183 torque limiter disc........................183 U Umbrellas............................................204 V Valve cover gaskets..........................147 Valve cover stud grommets..........147 Valve grind gasket sets...................147 Valve train kits...................................147 Vane pump parts rotor kits...........................................197 Voltage regulators...................168, 169 W Warning lights, parts.......................173 bulbs..................................................173 lens.....................................................173 Water pumps......................................160 Water temperature gauges...........162 adapter pipe...................................162 Weight mounting wedge..............202 Wheels, front and rear bearing kits............................199, 200 front hub cap..................................200 front wheel hub.............................199 inner tube valves...........................201 nuts...........................................199, 201 seals...................................................200 studs.........................................199, 201 wheels....................................200 - 202 Wiring harness kits...........................164 clips....................................................165 Work lights, parts bulbs..................................................174 springs..............................................174 work lights.......................................174 143 Ford Ford F Ford: Beginning serial numbers Fordson Super Major series 1961........08A-300001M 1962....... 08B-740000-A 1963....... 08C-781370-A 1964.......08D-900000-A 9N, 2N, 8N serial number location Model 9N 1939................................. 1 1940....................... 10234 1941....................... 45976 1942....................... 89888 1943.....................105412 Model 8N 1947................................. 1 1948....................... 37908 1949.....................141370 1950.....................245637 1951.....................343593 1952.....................442035 Late Model NAA, 600, 700, 800 & 900 serial number is located on left hand side of transmission case at point of joining with starting motor. Model NAA 1953................................. 1 1954....................... 77475 Series 600, 700, 800, 900 1954................................. 1 1955....................... 10615 1956....................... 77271 1957.....................116368 Series 601, 701, 801, 901 1957..........................1001 1958....................... 11977 1959....................... 58312 144 Price $69.95 FDS001GK3 $5.95 1953 - 1964 serial number location 1960.....................105943 1961.....................131427 1962.....................155531 Series 2000 (4-Cyl.), 4000 (4-Cyl.) & 6000 1962..........................1001 1963....................... 11948 1964....................... 38931 2000, 3000, 5000, 6600, 7000 serial and model numbers are stamped on the upper right front corner of the transmission. Engine serial number is stamped on left or right pan rail of block. 6000 serial number is located on left hand front side of trans housing. 8000 & 9000 ID is located inside the radiator filler cap access door. Series 2000 (3-Cyl.) 9000 US Production 1965.................. C100000 1966.................. C124200 1967.................. C161300 1968.................. C190200 1969.................. C226000 1970.................. C257600 1971.................. C292100 1972.................. C327200 1973.................. C367300 1974.................. C405200 1975.................. C450700 Fordson 1917................................. 1 1918............................ 255 1919....................... 34422 1920....................... 91712 1921.....................162667 1922.....................199448 1923.....................268433 1924.....................370331 1925.....................453341 1926.....................557509 1927.....................645611 1928.....................739581 1929.....................747584 1930.....................757265 Dexta serial number stamped on left hand clutch housing. The engine number is stamped on left hand side of block. Manifold fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. gas series (1953-64) Replaces: B9NN9425A FDS002GK $9.75 Gasket (For FDS002B) Replaces: 310074, 9N9447, C0NN9448C, EAF9447B, NAA55232A USA made FDS020 $19.95 Exhaust Elbow fits: 'Some' NAA, Jubilee, 501, 600, 700, 2000 4-cyl. series (1953-64); Also fits 'some' 800, 900 w/ FDS121 muffler, Replaces: NAA55250B (1-5/8" O.D.) 1-5/8" Fordson Super Dexta 1961...... 09A-312001-M 1962.......09B-070000-M 1963....... 09C-731454-A 1964.......09D-900000-A FDS021 Fordson Power Major series 1958...................1481091 1959...................1494448 1960...................1538065 1961...................1583906 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Gasket Set (For FDS001) Replaces: 9N9447, 9N9448 USA made $119.95 FDS020GK Fordson Major diesel series 1953...................1247381 1954...................1276857 1955...................1322525 1956...................1371418 1957...................1412409 1958...................1458381 Manifold fits: 9N, 2N, 8N Replaces: 9N9425 FDS002B Fordson Dexta 1958....................... 16066 1959....................... 22427 1960....................... 45216 1961....................... 72003 Fordson Major Diesel & Fordson Power Major serial and engine numbers are stamped on left hand flywheel housing or right side of engine block. Description / Application $2.25 $19.95 2" FDS021GK FDS094 FDS094GK $2.25 $78.85 $5.95 Order # Exhaust Elbow to Manifold (For FDS021 Elbow), Replaces: 310074 (2-1/4" center hole, 3-3/8" c.c. bolt pattern) Exhaust Manifold fits: Fordson Dexta, Super diesel w/ vertical exhaust Replaces: 957E-9430A Manifold Gasket Set fits: Dexta, Super Dexta, Replaces: 957E9448 NOTE: Fits vertical or horizontal exhaust. FDS076 $49.95 BACK IN STOCK! Exhaust Manifold Fits: 2000, 2110, 3000, 3400, 3500, 4000, 4110, 4400, 4500 (All 3-cyl. w/ gas, diesel & vertical exhaust) Replaces: C5NE9430E FDS076GK $8.50 Gasket fits: 2000, 2110, 2600, 3000, 3400, 3500, 3600, 4000, 4110, 4400, 4500, 4600 3-cyl. gas, diesel (8000 thru TW25 but must order 2) Replaces: C5NE9448A, E8NN9448AA Description / Application $3.95 Turbocharger to Exhaust Manifold Mounting Gasket fits: 8630 thru TW35 Replaces: D6NN6N640A USA made NOTE: See website for full applications. FDS233 $5.95 Manifold Nut & Washer Kit (For FDS001), Replaces: 33816S, 34808S (4) Brass nuts (7/16"-20); Yellow zinc plated lock washers (7/16") NOTE: If only a single nut is needed order ABC1878. ABC1878 $1.75 Manifold Nut & Lockwasher (For FDS001, FDS002B) (7/16" - 20 NF) NOTE: Brass nut, yellow zinc lock washer. Sold individually. FDS1721 $7.95 Manifold Nut & Washer Kit (For FDS002B), Replaces: 34673S8, 33816S (7/16" - 20 NF) NOTE: If only a single nut is needed order ABC1878. Exhaust Elbow to Manifold Gasket (For FDS020 Elbow) Replaces: NAA55232A (2" center hole, 3-3/8" c.c. bolt pattern) USA made Exhaust Elbow fits: 'Some' 601, 800, 900, 1801, 2000, 4000 4-cyl. gas series (thru 1964) w/ FDS398 muffler Replaces: 310075 (2" O.D.) Price ABC2511 Make your own gasket with our gasket material. Made in the USA! Order # Price ABC448 $17.90 Description / Application Exhaust Manifold Gasket Material (1/16" thick x 12" wide x 28-1/2" long) NOTE: Perforated steel core. ABC1830 $13.95 Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (1/16" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. ABC1835 $10.95 Cork / Rubber Rollpack Gasket Material For making general purpose gaskets (3/32" thick x 12" wide x 24" long) NOTE: Do not use for high temperature applications. ABC1844 $15.95 Gasket Paper for making general purpose gaskets (0.0160" thick x 18" wide x 98" long) NOTE: Do not use for high temperature applications. ABC1846 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $22.95 Gasket Paper for making general purpose gaskets (0.0275" thick x 20" wide x 108" long) NOTE: Do not use for high temperature applications. 145 Engine parts Model 2N 1942....................... 99003 1943.....................105375 1944.....................126538 1945.....................169982 1946.....................198731 1947.....................258504 Order # FDS001 Manifolds, parts cont... Ford Ford 9N, 2N, 8N serial and engine numbers are incorporated on left hand side of engine block. Manifolds, parts Engine gasket sets cont... Tips on ordering an engine piston ring set: Price Price $87.10 Application Fits: Some 2N, 8N, 9N 4-cyl., Replaces: 9N6149A FDS2088 $74.85 FDS2088: 3-3/16" bore, (3) 0.093" compression rings, (1) 0.156" oil ring FDS2092 $98.50 FDS2092: 3-3/16" bore, (2) 0.093" compression rings, (2) 0.187" oil rings NOTE: For 3 ring applications, discard 1 oil ring. Fits: 'Some' NAA, 501, 600, 700, 2000 4-cyl. (1953-64), Replaces: EAE6149A, 86539354 ABC2072 $126.85 ABC2072: 3-7/16" bore, (3) 0.093" compression rings, (2) 0.187" oil rings NOTE: On some engines discard 1 compression & oil ring per cylinder. Fits: 'Some' Jubilee, NAA, 501, 600, 700, 2000 4-cyl. series (1953-64) gas, LP FDS2098 $75.75 FDS2098: 3-1/2" overbore, (2) 0.093" compression rings, (1) 0.187" oil ring $69.85 FDS2100: 3.900" bore, (2) 0.093" compression rings, (1) 0.187" oil ring FDS2102 $145.00 FDS2102: 4" overbore, (3) 0.093" compression rings, (1) 0.187" oil ring Piston rings can not be returned if opened. Call or email for price and availability of other sizes. Order # Price FDS036 $179.75 FDS406 $4.50 $158.50 NOTE: Each kit includes (4) sleeves, standard 3.187" bore 3-ring pistons, rings & wrist pins, locks, pin bushings & complete gasket set w/ crankshaft seals. Measure sleeve thickness before ordering. Order rod & main bearings separately. Order # Price FDS2970 $235.00 Fits: 9N, 2N, 8N NOTE: Includes (4) 0.040" thick sleeves. FDS2976 $235.00 Fits: 9N, 2N, 8N NOTE: Includes (4) 0.090" thick sleeves. Sleeve & piston kits Engine overhaul kits: Inframe or out of frame kits are available by special order for 9N, 8N, NAA, 501, 600, 700, 800, 900, 2000, 3000, 4000, 5000 thru TW35. For price and availability call, or visit Special Order Parts under Shop Online on our website. Application NOTE: Each kits include sleeves, aluminum pistons, piston ring sets, FDS464 FDS3344 $124.95 $87.50 piston pins & pin retainers. Most other sets are available by special order. Verify engine is sleeved prior to ordering. Order # Price Application FDS3087 $312.50 Fits: Jubilee, 501, 600, 601, 700, 701, (2000 4-cyl.) gas w/ sleeved engine (1953-64), Replaces: CPN6055A (3.500" overbore) FDS3090 $298.50 Fits: 800, 801, 900, 901, (4000 4-cyl.) gas w/ sleeved engine (1954-64) Replaces: FPN6055A (4" overbore) NOTE: Includes all gaskets & crankshaft seals for major overhaul. Price FDS1323 $32.80 146 $83.50 $69.95 Description / Application Cylinder Head fits engines w/ front or side mounted distributors: 9N, 2N, 8N Replaces: 8N6050A ABC2825 $39.95 Application Order # Price $25.50 FDS453 $2.65 Fits: NAA, 600, 700 series gas, LP series (1953-57) w/ 7/16" head bolts USA made NOTE: Fits 134 C.I. engines w/ 7/16" head bolts. Govenor seal not included. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Valve Grind Gasket Set fits: NAA, Jubilee, 501, 600, 700 series (1953-57) (All w/ 134 C.I. gas engine & 7/16" head bolts) Valve Grind Gasket Set fits: 800, 900 series, 1801, 4000 series 4-cyl. gas (thru 1964) (All w/ 172 C.I., 192 C.I. gas engine w/ 1/2" head bolts) Stud (For FDS036) (7/16" dia. x 3" long NC-NF) NOTE: Used for 15 of the 18 studs per engine; Sold individually. FDS455 $13.25 Valve Train Kit (For FDS036) Fits: 9N, 2N, 8N (All w/ rotating exhaust valves) NOTE: Includes: NEW valves, guides, guide clips, springs, locks, retainers, rotators. Valve Cover Gasket only fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cylinder (1953-64) (All w/ 134 C.I., 172 C.I., 192 C.I. gas engine), Replaces: EAF6584C FDS1997 $6.95 Valve Cover Gasket fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610; Industrials: 230A, 340, 3400, 3500, 3550, 420, 4400, 4500, 515, etc. gas, LP, diesel (All 3-cyl. 1965 up to 5/31/87), Replaces: C7NN6584B, 81817048 FDS1766 $4.95 Valve Cover Stud Grommets fits the following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF6570A NOTE: 2 used per tractor; Sold in pairs. FDS2394 $10.95 Push Rod fits: Jubilee, NAA, 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. (1953-64), 6000 gas, LP, diesel, Replaces: EAA6565C, EBP6565B, C0AE6565C, 500356 (9.61" o/a length, 5/16" O.D.) USA made NOTE: Sold individually. If replacing 1/4" O.D. push rod, customer must also order #87801302 rocker adjusting screw (not available from STP, Inc.). See website for full applications. FDS1767 $6.50 FDS1770 $4.95 Valve Train Kit fits: Jubilee thru 4000 4-cyl. (1953-64) (All w/ 134, 172, 192 C.I. 4-cyl. gas engines) NOTE: Kit includes: NEW valves, guides, springs & locks. Does not include retainers. NEW! Valve Train Kit fits: 2000, 2600, 3000, 3600, 4000, 4600, 2610 thru 4630 series, Industrials (All w/ 158, 175, 192, 201 C.I. 3-cyl. gas, diesel (1965 10/1991) (Intake valve length: 5.74", head dia.: 1.805"; Exhaust valve length: 5.74", head dia.: 1.500"; Valve spring length: 2.208") NOTE: See website for all applications. cylinder head. FDS036VGK Description / Application Valve Grind Gasket Set fits: Super Dexta (April 1962 & up w/ A3-152 diesel), Replaces: 960E6051 NOTE: Includes all gaskets required when replacing the Fits: 9N, 2N, 8N (Front & side mount engines) FDS1327 FDS430 Valve grind gaskets, parts Engine gasket sets Order # Price $69.95 NOTE: For valve train kits not listed please call. FDS466 Base engine kits Fits: 601, 800 thru 4000 4-cyl. (1955-64) w/ 1/2" head bolts USA made NOTE: Fits 134 C.I. & 172 C.I. engines w/ 1/2" head bolts. Governor seal not included. Order # FDS425 Cylinder head, parts Fits: 'Some' 800, 900, 4000 4-cyl. series (1954-64) gas, LP, Replaces: EAF6149A, 86539359 FDS2100 Application Description / Application Valve Grind Gasket Set fits: 9N, 2N, 8N, Replaces: 7HA6521, 8BA6571 8N6051A, 9N9448, 9N6022 Valve Cover Gasket only fits: 9N, 2N, 8N (1939-52), Replaces: 7HA6521 NOTE: 2 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Pushrod Side Cover Gasket Fits following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF6521D Pushrod Side Cover Grommets Fits following gas, LP, diesel: NAA thru 4000 4-cyl. (1953-64) Replaces: CONN6589A NOTE: 3 used per tractor; Sold in sets of three. 147 Engine parts Engine parts 1 Bore size 2 Thickness of each ring 3 Quantity of each ring thickness per piston Order # Order # FDS1325 Ford Ford Measure old rings before ordering. Do not order by tractor model only. To ensure you order the correct rings, you will need the following information: Piston ring sets - USA made (unless noted) Valve grind gaskets, parts cont... Crankshafts, parts / camshaft parts Crankshafts, parts / camshaft parts cont... Order # NOTE: Bearings not included. Order # FDS207 FDS231 ABC2058 $585.00 $585.00 $4.95 $26.50 FDS2038 $7.95 $2.45 Crankshaft fits: 1710 Replaces: SBA115256261 FDS3305 Crankshaft fits: 1910 Replaces: SBA115256471 $169.65 Front Crankshaft Seal fits: NAA - 4000 4-cyl., 6000 series, Replaces: C0NN6700A (1.875" I.D., 2.571" O.D., 0.312" wide) 11-piece Improved Rear Crankshaft Seal Kit fits: NAA - 4000 4-cyl., 6000 series Replaces: C0NN6701A, EBU6701A, 84186689, B3NN6336A, C0NN6336A USA made NOTE: Rubber. Front Crankshaft Seal fits: 2000 3-cyl., thru TW35 gas, LP, diesel (1965 & up) Replaces: C5NN6700A, D5NN6700A, 87802755 (2.362" I.D., 3.268" O.D., 0.433" wide) NOTE: See website for full applications. FDS3301 FDS3310 $9.95 $49.95 $42.50 Crankshaft Gear fits: 9N, 2N, 8N Replaces: 48-6306, 486306A, 48-6306A USA made NOTE: 22 teeth. FDS2036 FDS2042 FDS2040 FDS2431 FDS2435 148 $72.50 $49.95 $52.50 $1.95 $2.50 Camshaft Gear (standard) fits: 9N, 2N, 8N (All w/ 4 bolt style aluminum cam gear), Replaces: 91A6256A, 7RA6256A USA made NOTE: Aluminum finish. 44 teeth. ABC021 Crankshaft Gear fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64) Replaces: EAF6306B, 500223 USA made NOTE: 21 teeth. Camshaft Gear (standard) fits: Jubilee, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64) Replaces: EAF6256M (Cast iron, Press fit) USA made NOTE: 42 teeth. NEW! Camshaft w/ Hardware Fits: Jubilee thru 960 (1953-55) when converted to later cam & gear w/ 5/16" dia. rear gear mounting bolts or using FDS3310 gear; 501 thru 981, 2000 4-cyl., 4000 4-cyl. (1955-64) gas, LP, diesel Replaces: EAF6250F, 310377, C0NN6251A, C0NN6251AGV NOTE: Includes snap ring for front cam gear, (4) 5/16"-18 bolts for rear gear and Woodruff key. NEW! Valve Lifter, Tappet fits: Jubilee thru 981, 2000 4-cyl., 4000 4-cyl. (thru 1964); 6000, Replaces: F3JL6500AA, EAA6500C, EAA6500D, 500295 (0.498" O.D. stem, 1.023" O.D. lifter face, 2.409" o/a length) NOTE: Priced & sold individually. NEW! Camshaft Hydraulic Pump Drive Gear fits: Jubilee thru 960 (1953-55) when converted to later cam & gear w/ 5/16" dia. mounting bolts (or using FDS3305 Camshaft); 501 thru 981, 2000 4-cyl., 4000 4-cyl. (1955-64) gas, LP, diesel Replaces: EAF907B, 500010 (33 teeth, (4) 5/16" bolt holes) NOTE: Early tractors used 1/4" bolt holes. Bolts on rear of camshaft w/ (4) 5/16" dia. bolts. Measure before ordering. Crankshaft Pulley fits: 9N, 2N, 8N Replaces: 192160 NOTE: Includes (4) 1/4" - 28 threaded holes for hub when used w/ front mounted loader. For drive hub order ABC1809. Engine assy. & break-in lube Contains a special additive to cover the wear surfaces that help prevent scoring & galling during initial engine start up. Also contains corrosion inhibitors to help prevent rust & pitting of surfaces & zinc for older engine valve train protection. Use on bearings, camshafts, lifters, oil pumps, etc. (4 oz. bottle) USA made Timing Gear Cover Gasket fits: 9N, 2N, (8N up to SN: 263843) (1939 - early 1950) (All w/ front mount distributor) Replaces: 9N6020A USA made Timing Gear Cover Gasket fits: 8N SN: 263844 & up (Late 1950-52) (All w/ side mount distributor), Replaces: 8N6020C USA made $39.95 Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Timing Gear Cover Gasket fits: Jubilee thru 4000 4-cyl. gas, LP, diesel (1953-64) Replaces: EAF6020B, F2NN6020AA, 500046 USA made Description Order # Price NEW! Melling Engine Assembly......................ABC3346...........$6.50 & Break-In Lube NOTE: Not for use on cylinder wall or piston rings. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Main bearings sold as engine set. See website for additional applications. Order # Price Description Replacement number(s) The following fit 2N, 8N, 9N w/ 120 C.I. flathead FDS2500 $9.30 Standard Connecting Rod Bearing (For standard 2.095" rod journal) 9N6211, 9N6211A FDS2502 $9.30 Connecting Rod Bearing (For 0.010" (2.085") undersize rod journal) 9N6211E FDS2504 $9.30 Connecting Rod Bearing (For 0.020" (2.075") undersize rod journal) 9N6211G FDS2506 $9.30 Connecting Rod Bearing (For 0.030" (2.065") undersize rod journal) A0NN6211A FDS2790 $45.00 Main Bearing Set (For standard 2.249" main journal size) 9N6331A, 9N6333A FDS2792 $45.00 Main Bearing Set (For 0.010" (2.239") undersize main journal) 9N6331E, 9N6333E FDS2794 $45.00 Main Bearing Set (For 0.020" (2.229") undersize main journal) 9N6331G, 9N6333G FDS2796 $45.00 Main Bearing Set (For 0.030" (2.219") undersize main journal) A0NN6331A, A0NN6333A FDS2798 $45.00 Main Bearing Set (For 0.040" (2.209") undersize main journal) The following fit NAA - 900, 501 - 981, 1801 - 2000 4-cyl., 4000 4-cyl., gas, LP, diesel (thru 1964); 6000 gas, LP, diesel (thru 1967) FDS2508 $9.30 Standard Connecting Rod Bearing (For standard 2.298" rod journal) 312026 FDS2510 $9.30 Connecting Rod Bearing (For 0.010" (2.288") undersize rod journal) 312103, EAG6211D FDS2512 $9.30 Connecting Rod Bearing (For 0.020" (2.278") undersize rod journal) 312104, EAG6211E FDS2514 $10.95 Connecting Rod Bearing (For 0.030" (2.268") undersize rod journal) C0NN6211B The following fit Jubilee thru 4000 4-cyl. w/ 134, 144, 172, 192 C.I. 4-cyl. gas, LP, diesel engines thru 1964 FDS2800 $49.95 Main Bearing Set (For 2.498" standard main journal) EAFF6331A, EAF6342C FDS2802 $49.95 Main Bearing Set (For 0.010" (2.488") undersize main journal) EAF6331D, EAF6342F, EAF6342E FDS2804 $49.95 Main Bearing Set (For 0.020" (2.478") undersize main journal)USA made EAF6331E, EAF6342G FDS2806 $49.95 Main Bearing Set (For 0.030" (2.468") undersize main journal) C0NN6331E, C0NN6342C FDS2808 $49.95 Main Bearing Set (For 0.040" (2.458") undersize main journal) C0NN6331F, C0NN6342D The following fit Dexta, Super Dexta w/ Perkins 3-cyl. 144, 152 C.I. gas, diesel NOTE: See website for additional applications. ABC2888 $14.95 Standard Connecting Rod Bearings 3-cyl. set (For standard 2.249" rod journal) 957E6211A, 87554578 ABC2890 $14.95 Connecting Rod Bearings 3-cyl. set (For 0.010" (2.239") undersize rod journal) 957E6211G, 87554579 ABC2892 $14.95 Connecting Rod Bearings 3-cyl. set (For 0.020" (2.229") undersize rod journal) 957E6211H, 87554580 ABC2894 $14.95 Connecting Rod Bearings 3-cyl. set (For 0.030" (2.219") undersize rod journal) 957E6211J, 87554581 The following fit Dexta, Super Dexta NOTE: Priced & sold as a set for engine. Thrust washer not included. ABC2898 $22.50 Main Bearing Set 3-cyl. (For standard 2.749" main journal) NOTE: Thrust washer not included. 957E6331L, 957E6333L, 957E6341L, 957E6342L ABC2900 $22.50 Main Bearing Set 3-cyl. (For 0.010" (2.739") main journal) 81804157, 251372F ABC2902 $22.50 Main Bearing Set 3-cyl. (For 0.020" (2.729") main journal) 957E6331N, 957E6333N, 957E6341N, 657E6342N ABC2904 $22.50 Main Bearing Set 3-cyl. (For 0.030" (2.719") main journal) The following fit Fordson Dexta, Fordson Super Dexta w/ 144, 152, 165, 203 C.I. Perkins gas, diesel ABC2811 $7.95 4-piece Thrust Washer Set (Standard (0.122") thick) 81717707, 81717711 ABC2813 $9.95 4-piece Thrust Washer Set (Oversize (0.129") thick) Replaces: 81717708 The following fit 2000 3-cyl. thru 4610, 230A thru 4500 Industrial w/ 158, 175, 192, 201 C.I. gas, diesel (1965 & up) NOTE: See website for all applications. FDS2810 $19.95 Connecting Rod Bearing Set (3-cyl.) (For (2.750") standard rod journal) DFPN6211B, 83906781 FDS2812 $22.50 Connecting Rod Bearing Set (3-cyl.) (For 0.010" (2.740") undersize rod journal) DFPN6211D, 83906783 FDS2814 $24.50 Connecting Rod Bearing Set (3-cyl.) (For 0.020" (2.730") undersize rod journal) DFPN6211E, 83906784 Crankshaft bearings continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 149 Engine parts Engine parts ABC1998 FDS2440 Description / Application NOTE: Measure bearings before ordering, no returns if package has been opened. Description / Application Ford Ford FDS2412 Price Price Crankshaft bearings Crankshaft bearings cont... Oil fill / breather caps cont... NOTE: Measure bearings before ordering, no returns if package has been opened. Order # Rod bearings are priced and sold per journal (2 halves) unless noted otherwise. Main bearings sold as engine set. See website for additional applications. Order # Price Description Price FDS2437 $1.25 FDS1392 $7.20 FDS3367 $9.95 Replacement number(s) The following fit 2000 3-cyl. thru 4610, 230A thru 4500 Industrial w/ 158, 175, 192, 201 C.I. gas, diesel (1965 & up) NOTE: See website for all applications. cont... FDS2822 $59.95 Main Bearing Set (For (3.372") standard main journal size) FDS2824 $59.95 Main Bearing Set (For 0.010" (3.362") undersize main journal) CFPN6333D, 87554565 FDS2826 $59.95 Main Bearing Set (For 0.020" (3.352") undersize main journal) CFPN6333E, 87790359 $39.90 Standard Connecting Rod Bearing Set (6-cyl.) (For (2.750") standard rod journal) DFPN6211B, 83906781 FDS2818 $45.00 Connecting Rod Bearing Set (6-cyl.) (For 0.010" (2.740") undersize rod journal) DFPN6211D, 83906783 FDS2820 $49.00 Connecting Rod Bearing Set (6-cyl.) (For 0.020" (2.730") undersize rod journal) DFPN6211E, 83906784 Oil pump parts, repair kits Order # Price FDS366 $18.75 Oil fill / breather caps Description / Application Order # Price FDS257 $28.75 FDS364 JDS500 $2.95 $32.50 Oil Pump Relief Valve Spring fits: 9N, 2N, 8N, Replaces: 9N6654 NOTE: Helps to restore oil pressure. FDS384 FDS381 FDS481 $59.60 $60.50 Oil Pump Repair Kit (For 9/16" wide oil pump gears) fits: 9N, 2N, (8N up to SN: 247570) & Oil pump housing 9N6603 Replaces: APN6600A, 9N6608A USA made NOTE: FDS384 contains (2) 9/16" wide gears, main drive gear w/ shaft, bushing & gasket. Check gear width before ordering. Bushing must be sized to fit. Oil Pump Repair Kit (For .725" thick oil pump gears) fits: 8N SN: 247571 & up & Oil pump housing 8N6603 Replaces: APN6600B, 8N6608 USA made NOTE: FDS381 contains (2) .725" thick gears, main drive gear w/ shaft, bushing & gasket. Check gear width before ordering. Bushing must be sized to fit. ABC043 ABC044 $12.95 $13.50 1-Piece Oil Fill / Breather Cap w/ Clip & Copper Filter Element fits: Late 8N w/ side mounted distributor Replaces: 8N6766B (1-1/2" tall) USA made NOTE: Exact of original. E-coated black. "Oil" stamped into top. Fits over 1-1/2" pipe. Oil Fill / Breather Cap w/ Clip & Filter Element fits: All Ford models thru 1964 Replaces: 8N6766B (1-1/2" tall) NOTE: Economy style. Oil Fill / Breather Cap w/ Replaceable Filter Element fits: Late 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1950-64) Replaces: 310030 (cap), 8N6782A (filter element) Order # FDS246 ABC292 ABC1955 ABC539 Price $22.95 $1.15 $1.75 $7.95 ABC540 $2.99 FDS429 $16.95 $4.95 Filter Element only (For ABC043 Cap) FDS2001 $8.95 Description / Application Oil Pan Drain Plug Screen w/ Gasket Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1939-1964), Replaces: 9N6730WG (plug screen) & 8N6734 (gasket) Gasket only fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1939-1964) Replaces: 8N6734 Drain Plug Gasket / Washer fits: 2000 3-cyl. - TW35, etc. (1970 & up using 3/4" I.D. drain plug), Replaces: C9NN6734A, 81822148 (0.750" I.D., 0.058" thick, 0.973" O.D.) NOTE: Made of nylon. Oil Pan Drain Plug fits: 2000 3-cyl. - 5200 (1965-69) using 7/8" drain plug Replaces: C5NE6730B (7/8" x 18 NF) USA made NOTE: White zinc finish. Measure before ordering. Washer / Gasket (For ABC539) Replaces: EBU6734A USA made NOTE: Copper. $7.40 Valve Cover Vent Breather Element Fits: NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas, diesel (1953-64), Replaces: EAF6866A STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS432 $8.95 Oil Pan Gasket fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cyl. (1953-64) (All w/ 134, 172, 192 C.I. gas, diesel engine), Replaces: EAF6710B Oil Pan Gasket fits: Dexta, Super Dexta w/ Perkins 3-cyl. 144 C.I., 152 C.I. gas, diesel Replaces: 296225A1 Oil Pan Gasket fits: 2000 3-cyl., 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610; Industrials 230A - 555B, 3400, 4400, 4500 (All 3-cyl. gas, LP, diesel) (1965 & up), Replaces: F0NN6710AA, 83990594 Order # Price ABC049 $9.10 Fits: 9N, 2N, 8N, Replaces: B2NN6750A ABC050 $9.25 Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas (1953-64), Replaces: C0NN6750B Application Oil filters Order # Price ABC045 $11.95 Application Cartridge Type Fits: 9N, 2N, 8N, Replaces: APN6731B (4.064" tall, 3.727" wide) USA made ABC047 $14.85 ABC149 $7.40 Fits: NAA, Jubilee, 501, 600, 800 series (1953-59), Replaces: CPN6731B (4-3/4" tall, 3-15/16" wide) USA made NOTE: For tractors which have not been converted to spin-on type. Fits: Dexta & Super Dexta diesel 957E, 960E, Replaces: EPN6731B (4-7/16" tall, 2-3/4" wide) Spin-On Type ABC007 7-Piece Oil Pan Gasket Set fits: 9N, 2N, 8N w/ 120 C.I. engine, Replaces: 9N6781 FDS374 Description / Application Engine oil level / dipsticks Oil pan parts $48.50 Oil Pump Pickup Tube w/ Plate Fits: 9N, 2N, 8N, Replaces: 86604201, 8N6615, 9N6615 150 ABC042 NEW! Oil Filler Tube Cap, Twist Plug Style fits: 2000 3-cyl. thru TW35 (1965-96) Replaces: D5NN6N609A, 83907851 (Expands from 1.165" O.D. - 1.275" O.D.) NOTE: See website for all applications. Description / Application 1-Piece Oil Fill / Breather Cap Fits: 9N, 2N, 8N w/ front mounted distributor (1939-50), Replaces: 9N6766 NOTE: Like original Oil Pump Relief Valve Plunger fits: 9N, 2N, 8N, Replaces: 01A6663 NOTE: Helps to restore oil pressure. Oil Fill Cap w/ Gasket fits: 501 thru 4000 4-cyl. diesel (1958-64); 2000 thru 7500 gas, LP, diesel (1965 & up), Replaces: 310945, C5NE6766C, DONN6766A, 81823295 (2.325" O.D., 2.240" I.D., 2.005" tab to tab, .450" tab width) NOTE: White zinc finish. Price $12.95 Engine parts Engine parts FDS2816 Valve Cover Vent Breather Gasket Fits: NAA thru 4000 4-cyl. gas, diesel (1953 - 64), Replaces: EAF6863C, 500499 (2-3/4" O.D.) USA made Order # ABC2823 $9.85 Fits: 501, 600, 800, 900, 1801, 2000, 3000, 4000 series, 5000, 6000, 7000 thru 7710 Replaces: C7NN6714A, C9NN6714A (5-1/4" tall, 3.675" O.D.) USA made Flywheel ring gear Fits: All Ford models (1939-64) except Fordson Major, Dexta gas, diesel Replaces: 9N6384 (134 teeth) Description Order # Price Flywheel Ring Gear........................................ ABC070.................$33.75 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Ford Ford The following fit 7810 thru TW10 w/ 401 C.I. diesel NOTE: See website for additional applications. Description / Application Oil pan parts cont... 151 Muffler clamps, bracket Order # FDS116 ABC360 $9.95 $21.25 ABC2519 $14.95 ABC2625 $8.60 Muffler Clamp Kit fits: 9N, 2N, 8N gas (1939-52), Replaces: CAPN5200A NOTE: Includes: (2) cast iron clamps, nuts, bolts & lock washers. Price ABC568 $2.95 Chrome Muffler Clamp fits: Same as FDS398 (Fits pipe O.D. of 1.850" - 2.000" range) NOTE: Original style. Stainless Steel Muffler Clamp Fits: Ford models (2") Application Fits: 9N, 2N, 8N gas (1939-52) Replaces: 8N5230 FDS121 $22.25 Fits: Some NAA, Jubilee, 501, 600, 601, 700, 701, 800, 900, 2000 4-cyl. gas (All w/ 1-5/8" inlet I.D.), Replaces: NAA5230E FDS121 dimensions: Inlet length: 2-1/4", Inlet I.D.: 1-5/8", Shell length: 13", Shell diameter: 3-1/4", Outlet length: 2-1/4", Outlet O.D.: 1-5/8", Overall length: 17-1/2". Use w/ FDS020 elbow & ABC360 or ABC572 clamps. FDS398 $28.95 Fits: Some 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. gas, diesel (1958-64) (All w/ 2" inlet I.D.), Replaces: 310079 FDS398 (Horizontal round body) dimensions: Inlet length: 2", Inlet I.D.: 2", Shell length: 13-1/2", Shell diameter: 3-1/2", Outlet length: 1-1/2", Outlet O.D.: 1-7/8", Overall length: 18", Use w/ FDS021 elbow (gas). If clamps are needed order ABC574, ABC576 or ABC327 clamps. Painted Steel Clamp Fits: Same as ABC2519 & ABC327 (2") FDS402 $61.70 Dimension (1-1/2" clamp) NOTE: Use w/ FDS319 exhaust pipe. $2.95 (1-5/8" clamp) NOTE: Use w/ FDS121 muffler - 1 end only, FDS124 exhaust pipe. ABC572 $2.95 (1-3/4" clamp) NOTE: Use w/ FDS121 muffler - 1 end only, FDS449, FDS450 exhaust pipes. $3.25 (1-7/8" clamp) NOTE: Use w/ FDS398 muffler - 1 end only. ABC576 $3.25 (2" clamp) NOTE: Use w/ FDS398 - 1 end only, FDS402, FDS404 mufflers. ABC578 $3.25 (2-1/4" clamp) ABC580 $3.25 (2-1/2" clamp) ABC583 $4.95 (2-3/4" clamp) ABC585 $4.95 (3" clamp) ABC2234 $4.95 (3-1/2" clamp) ABC1771 $7.95 (4" clamp) Price $16.50 $35.65 Fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, 4400, 4500, 4600 & 5000 gas, diesel 3-cyl. & 4-cyl. (1965 & up) (All w/ purchase of FDS399 Muffler Adaptor if not equipped w/ an existing adaptor) Replaces: C7NN5230AB, C7NN5230AC, C7NN5230Z FDS404 (Vertical round body) dimensions: Inlet length: 4-1/2", Inlet I.D.: 1-7/8", Shell length: 17", Shell diameter: 5-1/2", Outlet length: 7-1/2", Outlet O.D.: 2", Overall length: 29", If raincap is needed order RCS005. If clamp is needed order ABC576. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Application Order # Muffler Adaptor fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000 gas, diesel 3-cyl. & 4-cyl. (1965 & up), Replaces: C3NN5255B FDS124 Price $25.15 FDS399 dimensions: Inlet length: 1-1/2", Inlet I.D.: 1-7/8", Shell length: 11-1/4", Outlet length: 2-3/4", Outlet O.D.: 1-7/8", Overall length: 151/2" Description / Application Horizontal Tail Pipe fits: NAA, Jubilee, 501, 600, 601, 700, 701, 2000 series w/ 134 C.I. gas, 800 w/ 172 C.I. gas (1953-64) (All w/ 4 or 5 speed transmission) Replaces: NCA5263B NOTE: Use w/ FDS319 exhaust pipe & FDS121 muffler. FDS124 Dimensions: 1-1/2" Inlet I.D., 54" length, 1-1/2" Outlet I.D. FDS450 Raincaps Order # Price RCS002 $9.65 (1-1/4" - 1-7/16" I.D.) NOTE: Painted. RCS003 $9.80 (1-1/2" - 1-11/16" I.D.) NOTE: Painted. RCS004 $9.95 (1-3/4" - 1-15/16" I.D.) NOTE: Painted. RCS005 $10.35 (2" - 2-3/16" I.D.) NOTE: Painted. RCS006 $10.75 (2-1/4" - 2-7/16" I.D.) NOTE. Painted. RCS007 $10.95 (2-1/2" - 2-11/16" I.D.) NOTE: Painted. RCS008 $9.00 (2-3/4" - 2-15/16" I.D.) NOTE: Painted. RCS009 $13.35 (3" - 3-3/16" I.D.) NOTE: Painted. RCS014 $34.80 (2-1/2" I.D.) USA made NOTE: Chrome plated. RCS015 $41.95 (3" I.D.) USA made NOTE: Chrome plated. RCS016 $45.95 (3-1/2" I.D.) USA made NOTE: Chrome plated. Fits: 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000 gas, diesel 3-cyl. & 4-cyl. (1965-75) (All w/ purchase of FDS399 Muffler Adaptor if not equipped w/ an existing adaptor), Replaces: C5NN5230AR FDS402 (Vertical oval body) dimensions: Inlet length: 5", Inlet I.D.: 1-7/8", Shell length: 10-3/4", Shell diameter: 4" x 8", Outlet length: 13-1/4", Outlet O.D.: 2", Overall length: 29", If raincap is needed order RCS005. If clamp is needed order ABC576. FDS404 ABC574 Order # FDS399 FDS122 (Horizontal exhaust system) dimensions: MUFFLER - Inlet length: 2-1/2", Inlet I.D.: 1-1/2", Shell length: 23, Shell diameter: 3-1/4", Outlet length = 8-1/2", Outlet O.D.: 1-1/2", Overall length: 34"; EXHAUST PIPE - Flared inlet, Vertical length: 15-1/2", Horizontal length: 22", Outlet O.D. = 1-1/2". Welded 1-piece assembly - muffler & exhaust pipe.If clamp is needed order FDS116. Rear Muffler Bracket fits: 9N, 2N, 8N w/ horizontal muffler, Replaces: 9N5260 (1-3/4") NOTE: Will fit FDS122 muffler. ABC570 152 Price $32.40 Muffler Clamp fits: NAA, Jubilee, 501, 600, 700, Early 800, 900 series (1953-57) Replaces: NAA5270A (1-3/4". Fits pipe O.D. of 1.725" - 1.825" range) Economy muffler clamps USA made Order # Order # FDS122 Exhaust pipes - USA made cont... $22.95 Fits the following pipe O.D.: FDS450 Dimensions: 1-3/4" Inlet I.D., 24" Vertical length, 29" Horizontal length FDS449 $24.95 Choke parts Order # Fits: NAA thru 4000 4-cyl. gas, diesel (1953-64), Replaces: NCA5290A (25-3/4" long) Order # Price $22.95 FDS262 $4.95 Choke Knob fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1939-64) Replaces: 9N9703 (10 - 32 thread) NOTE: Aluminum. JDS718 $19.95 Metal Sheathed Choke Cable Fits: Tractors, Forklift & other applications using 47" or less cable NOTE: Metal sheathed w/ "CHOKE" on knob. Cut to length. ABC423 $9.95 Universal Choke Cable fits: Tractors, Forklift & other applications using 72" or less cable (72" long) NOTE: Metal sheathed. Cut to length. Can also be used as a 'Stop' cable for diesel engines. ABC3210 $16.50 NEW! Universal Engine Stop Cable (Diesel Fuel Shut Off) fits: Tractors, Forklifts & other Applications using 96" or less cable NOTE: Nylon sheathed. Cut to length. Price Exhaust pipes - USA made Order # Price $24.50 Description / Application Exhaust Pipe fits: NAA, Jubilee, 501, 600, 601, 700, 701, 800, 900 w/ 172 C.I. gas, 2000 series w/ 134 C.I. gas, 4 & 5 speed transmissions & Select-O-Speed (1953-64) (All 4-cyl.) Replaces: NCA5255B NOTE: Use w/ FDS124 tail pipe & FDS121 muffler. Description / Application FDS266 Muffler Heat Shield.........................................FDS2446............... $39.50 FDS319 Horizontal Tail Pipe fits: 801, 1801, 4000 4-cyl. gas (1958-64) (All w/ 4 or 5 speed transmission) Replaces: 311050 NOTE: Use w/ FDS450 exhaust pipe & FDS398 muffler. FDS449 Dimensions: 1-3/4" Inlet I.D., 60" length, 1-3/4" Outlet I.D. Muffler heat shield Description Exhaust Pipe fits: 801, 1801, 4000 4-cyl. gas (1958-64), Replaces: 311051 NOTE: Use w/ FDS449 horizontal tail pipe & FDS398 muffler. Engine parts Engine parts FDS463 $9.95 Description / Application Mufflers - USA made cont... Ford Ford ABC327 Price $12.50 Mufflers - USA made FDS319 Dimensions: Length: 35", Inlet I.D.: 1-1/2" STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Choke Control Rod Assembly w/out Knob fits: 9N, 2N, Replaces: 9N9700 (29 1/2" length) NOTE: Pre-bent. 153 Carburetors, parts Carburetors, parts cont... Order # Can't find your carburetor number? Look on page 344A. Carburetors are limited to replacement only - NO refunds. No replacement will be given if dirt, rust, etc. is found in the ABC513 Price $2.50 carburetor or if it has been taken apart. Order # FDS018 FDS1195 ABC297 ABC230 ABC133 FDS1353 154 $282.50 $282.50 $282.50 $7.50 $6.45 $6.15 $37.15 Carburetor (NEW, not Rebuilt) Fits: 9N, 2N, 8N, Replaces: Marvel Schebler TSX 33, 241A, B, C NOTE: Only fits flathead engines. Will not fit overhead valve engines. ABC1152 Carburetor (NEW, not Rebuilt) Fits: NAA, Jubilee Replaces: EAE9510A, EAE9510C, B2NN9510A, Marvel Schebler TSX 428 Carburetor (NEW, not Rebuilt) Fits: 600, 700 (up to 1957) w/ 134 C.I. engine, Replaces: EAE9510D, B4NN9510A, Marvel Schebler TSX 580 Carburetor (NEW, not Rebuilt) Fits: 501, 601, 701, 2000 4-cyl. (1958-64) w/ 134 C.I. engine, Replaces: 310746, 312954, B8NN9510A, Marvel Schebler TSX 692, 765 Carburetor Fuel Inlet Elbow & Strainer Assy. fits: 9N, 2N, 8N, NAA, NAB, Jubilee, Golden Jubilee gas (1939-54) Replaces: 9N9553 (Male end (Screen end) - 1/8" pipe thread; female end 1/4" flare) NOTE: Must have internal threads. Used w/ flair fitting; NOT compression fitting. VITON Needle Float Valve (For Marvel Schebler carburetors) fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700 series (1939-57) (All w/ TSX 33, 38, 83, 241A, B, C, 420, 428, 500, 534, 551, 580, 593) (120 C.I. & 134 C.I. engines), Replaces: C3NN9564A, 233-536 (.080 orifice) USA made NOTE: Viton needle & seat helps stop carb flooding. VITON Needle Float Valve (For Marvel Schebler carburetors) fits: Some 601, 701 both w/ TSX 692, 765; 800, 900, 2000, 4000 4-cyl. series TSX 662, 706, 769, 771, 813, 977 (1954-64) Replaces: C3NN9D532A (0.100" orifice) USA made NOTE: Viton needle & seat helps stop carburetor flooding. Throttle Shaft (For Holley carburetors) Fits: 2000 3-cyl. thru 555B (1965 & up) Replaces: C5NE9581A $13.95 ABC1156 $23.95 ABC557 $29.95 ABC564 ABC562 ABC1159 ABC1182 ABC1171 ABC1167 $26.40 $27.35 $5.00 $18.50 $35.70 $13.25 Main Nozzle (For Marvel Schebler carburetor) fits: 9N, 2N, 8N w/ TSX 33, 38, 83, 241A,B & C, 420 Replaces: 9N9530, 47-180 Main Nozzle (For Marvel Schebler carburetor) fits: NAA, 600, 700 w/ TSX 428, 500, 577, 580, Replaces: 312949, EAE9530A, 47-270 Main Carburetor Nozzle (For Zenith carburetors) fits: 9N, 2N, 8N (All w/ carb 10850, 11850), Replaces: C66-47-50 USA made Main Jet Adjustment Needle Assy. (For Zenith carburetor) fits: Some NAA, Jubilee, 600 series w/ carb 13876 (3/8" x 24" thread) USA made Order # ABC408 Price $1.39 Choke Disc (For Marvel Schebler carburetor) fits: 9N, 2N, 8N, NAA, 600, 700 (All w/TSX 33, 241A, B, C, 420, 428, 500, 580), Replaces: 9N9549, 27-530, 27-539 (1-5/16" O.D.) Choke Disc (For Marvel Schebler carburetor) fits: 501, 601, 701 (1958-62), 800, 900 (1955-57), 2000 4-cyl. (All w/ TSX 534, 551, 577, 593, 692, 706, 771) Replaces: EAF9549B, 312952, 27-573 (1-3/8" O.D.) USA made Venturi (For Marvel Schebler carburetor) Fits: 9N, 2N, 8N (All w/ TSX 33, 38, 83, 241A, B, C, 420), Replaces: 9N9586, C5NN9586B, 46-467 (11/16" dia. throat) NOTE: Plastic. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Manifold to Carburetor Gasket Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700 (1939-57) w/ TSX 33, 38, 83, 241A,B,C, 420, 428, 500, 580 Replaces: 9N9447 (2-3/8" - 2-7/16" slotted bolt holes, 1-3/16" center hole) USA made ABC410 $1.39 Manifold to Carburetor Gasket Fits: Ford models (2-15/16" c.c. bolt holes, 1-3/4" center hole) USA made ABC416 $1.50 Manifold to Carburetor Gasket fits: 601, 701, some 800, some 900, 2000 4-cyl. (thru 1964) (All w/ TSX 551, 577, 593, 692, 706, 765, 771); 134 C.I. (1958-64), 172 C.I. (1954-57), Replaces: EAF9447B (2-3/8" c.c. bolt holes, 1-5/16" center hole) USA made ABC424 $1.39 Manifold to Carburetor Gasket fits: 801, 901, 4000 4-cyl. series (1958-64) w/ TSX 662, 769, 813, 966, 970, 972, 973, 977, 988, 989, Replaces: C5NE9447A (2-3/4" c.c. bolt holes, 1-1/2" center hole) NOTE: Import. Perforated steel core. ABC3233 $3.50 NEW! Carburetor Gasket Kit (For small bowl Marvel Schebler carburetors) Fits: 9N, 2N, 8N (All w/ TSX 33, 241A, B, C, 420); NAA, Jubilee (Both w/ TSX 428); 600, 700 (Both w/ TSX 500, 577, 580, 692, 765); 800 w/ TSX 551, 593, 706, 771; 900 w/ TSX 551, 593, 706; 2000 4-cyl. w/ TSX 500, 577, 580, 692, 765, 976; Power Units w/ TSX 38, 83, 420, 534, 577, 771, 971, 976, 987, 996, Replaces: 9N9502 (4-5/16" o/a length bowl gasket) USA made Main Jet Adjustment Needle Assy. (For Marvel Schebler carburetor) Fits: 801, 901, 1801, 4000 (4-cyl.) (1958-64) w/ TSX 662, 769, 774, 813 Replaces: 311605, C3NN9G504A, 43-722 (3/8" - 24 UNF) Throttle Disc (For Marvel Schebler carburetor) fits: 9N, 2N, 8N, NAA, 600, 700 w/ TSX 33, 241B, 428, 500, 580 Replaces: 9N9585, 14-175 (15°, 1.105" O.D.) USA made Description / Application ABC2275 $3.95 Carburetor Gasket Kit (For Big Bowl Marvel Scheblers) fits: Some 800 thru 4000 4-cyl. series, Replaces: EAE9502 (5" Bowl gasket length) USA made NOTE: Fits same carb numbers as FDS212 economy kit on page 156. Order # Price Application ABC037 $19.95 (For Marvel Schebler carburetors) Fits: 800 w/ TSX; 801, 901, 1801 series, 4000 (1958-64) (All w/ TSX 662, 769, 813, 977); Power Units w/ TSX 966, 972, 973, 988, 989, 993, 994, 997, 998, Replaces: 311608 ABC190 $15.75 (For Zenith carburetors) fits: 9N, 2N, 8N, NAA, 600, 700, 800 & 900 (All w/ carb 10850, 11850, 12492, 12493, 13876, 13878, 13879, 13880), Replaces: C85-28 ABC452 $23.60 (For Zenith carburetors) fits: 800, 2000 3-cylinder, 3000, 4000 3-cylinder, 5000, 6000 (All w/ carb 12471, 12472, 12902, 13875, 13881, 13912, 13913, 13914, 13958, 13960, 13961); Power Units w/ carb 13915, 13916, 13917, 13920, Replaces: Zenith C85-115S ABC1352 $55.40 (For Holley carburetors) fits: 2000 3-cyl. thru 6600 (1965 & up); Also fits Holley carbs R2923-1A, R3210, R3589B, R3657, R3658, R3658A, R4111, R4119, R4119A, R4120, R4120- 1, R6852, R6853, R7867, R7896, R8552, R8553, R8554 Replaces: C5NE9550A, 81810964 NOTE: See website for complete application listing. Engine parts Engine parts FDS1183 $158.00 Description / Application Application Throttle Body Repair Bushing (For small bowl Marvel Schebler carburetors) Fits: 9N thru (Early 900 w/ TSX 593, 706) (.383" O.D., .247" I.D., .501" long) USA made NOTE: Repairs worn throttle body using 1/4" throttle shafts. Must ream to size. Carburetor floats cont... Carburetor repair kits Can't find your carburetor number? Look on page 344A. Economy carburetor repair kits contain: Needle & seat (unless noted), float lever pin, seal, gaskets & instructions. Basic carburetor repair kits contain: Throttle shaft, needle & seat (unless noted), float lever pin, seal, gaskets & instructions. Complete carburetor repair kits contain: Choke & throttle shafts, needle & seat (unless noted), float lever pin, miscellaneous plugs & screws, throttle shaft seals, adjustment screw & gaskets. Order # Price Description / Application Economy Carburetor Repair Kit - USA made Carburetor floats Order # ABC036 ABC220 Price Application $12.50 (For small bowl Marvel Schebler carburetors) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700 w/ 134 C.I. gas engine (1953-57); Early 800, 900 4-cyl. series w/ 172 C.I. gas engine (All w/ TSX 33, 241A, B, C, 428, 500, 551, 580, 593, 692, 706, 765); Power Units w/ TSX 38, 83, 420, 534, 577, 771, 971, 976, 987, 996 Replaces: 9N9550A STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $22.50 Ford Ford FDS1178 Price Carburetor gaskets Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 9N, 2N, 8N (All w/ TSX 33, 241A, B, C 420); NAA & Jubilee (Both w/ TSX 428); 600 & 700 w/ TSX 500, 577, 580, 692, 765; 800 w/ TSX 551, 593, 706, 771; 900 w/ TSX 551, 593, 706; 2000 4-cyl. w/ TSX 500, 577, 580, 692, 765, 976; Power Units w/ TSX: 38, 83, 420, 534, 577, 771, 971, 976, 987, 996 Carburetor repair kits continue on next page 155 Carburetor repair kits cont... Order # Price ABC1918 (unless noted), float lever pin, seal, gaskets & instructions. Description / Application $34.95 Basic carburetor repair kits contain: Throttle shaft, needle & seat (unless noted), float lever pin, seal, gaskets & instructions. Complete carburetor repair kits contain: Choke & throttle shafts, needle & seat (unless noted), float lever pin, miscellaneous plugs & screws, throttle shaft seals, adjustment screw & gaskets. Price Description / Application Economy Carburetor Repair Kit - USA made cont... $25.70 ABC1344 Engine parts ABC1349 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 800, 900, 1801, 4000 4-cyl. series & Power Units w/ TSX 844, 884, 966, 972, 973, 988, 989, 993, 994, 997, 998 ABC215 FDS1347 ABC427 156 Economy Carburetor Repair Kit (For Zenith carburetors) fits: 800, 4000 (Both w/carb 12471, 13875); 6000 w/ carb 12902 Economy Carburetor Repair Kit (For Holley carburetors) fits: 2000 3-cyl. thru 5100 w/ Holley #R3158A, R3210, R3589B, R3656A, R3657, R3658, R4111, R4111-1A, 4111A, R4119, R4119-1A, R4119A, R4120, R4120-1, LIST6852, R6852, R6853, R6863, R7867, R7896, R8552, R8553, R8554 NOTE: Includes repair components for acceleration pump, piston assembly, spring, retainer. Float valve seat not included. Price ABC290 $1.00 ABC029 $87.20 ABC030 $164.30 Basic Carburetor Repair Kit (For Marvel Schebler carburetors) fits: 801, 901, 1801, 4000 series (1958-64) w/ 172 C.I. gas engine (All w/ TSX 662, 769, 813) NOTE: NOTE: Does not include choke shaft. ABC027 $229.00 ABC028 $229.00 Complete Carburetor Repair Kit ABC031 $45.00 Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 9N, 2N, 8N (All w/TSX 33 & 241A, B, C) $37.50 $39.95 Order # ABC034 ABC212 ABC213 $58.50 $58.50 $58.50 Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: NAA, Jubilee (1953-54) (Both w/ TSX 428), 600, 700 (1954 - 57) w/ TSX 580 (All w/ 134 C.I. gas engine) Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 501, 601, 701 (1958-62); 2000 w/ 134 C.I. gas engine (1952-64) (All w/ TSX 765) Complete Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 800, 900 series w/ 172 C.I. gas engine (1954-57) (All w/ TSX 593, 706) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS1917 $5.75 Governor Compensating Spring Fits: 501 thru 4000 4-cyl. gas, LP Replaces: NCA9827A (6.535" o/a length, 0.532" O.D., 0.070" wire dia) USA made NOTE: Mounts between bellcrank & underneath battery tray. Description / Application Governor Housing Mounting Cover Gasket fits: 9N, 2N, 8N Replaces: 9N6022 USA made Basic Governor Repair Kit Fits: 9N, 2N, 8N, Replaces: BOK12502, 86979852 USA made NOTE: Kit contains: Gasket, lower race assembly, ball bearing, C-clip, shim & 5/8" governor balls Complete Governor Repair Kit Fits: 9N, 2N, 8N Replaces: CAPN12502A USA made NOTE: Kit contains: Gasket lower race assembly, shaft assembly, upper race assembly, ball bearing assembly, drive shaft ball stop shim, 5/8" governor balls, bushings, dust seal & C-clip Radiators, parts Order # Price FDS1859 $306.50 FDS1865 $338.35 Heavy Duty Radiator fits: NAA, 501, 600, 700, 800, 900, 2000 4-cyl, 4000 4-cyl series (1953-64) (All w/out oil cooler in lower tank), Replaces: C5NN8005AB, NCA8005B,C,D (original style straight fins, 24-5/8" H, 17-3/8" W) NOTE: Does not include drain plug or cap. FDS422 $255.95 Complete Radiator fits the following tractors w/out oil cooler in lower tank: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4100, 4400, 4500, 4600SU, 4610, 231, 335, 340, 445, 531, 540 (1965 & up) (All 3-cyl. gas, diesel) Replaces: C7NN8005H, E0NN8005MD15M NOTE: Use w/ ABC2282 mounting bolt kit. ABC209 $3.25 Radiator Drain Plug fits: 9N thru TW35 Replaces: 81465471, 9N8115B, C9NN8115A (1/4"-18 NPT) USA made NOTE: See website for full applications. ABC057 $2.35 Governor Assembly (Complete 3 Arm) Fits: 9N, 2N (1939-47) w/out proofmeter drive, Replaces: 9N18200C USA made Governor Assembly (Complete 2 Arm) Fits: 8N (1947-52) w/ proofmeter drive Replaces: 8N18204B USA made FDS248 $74.50 FDS248GK $1.75 Governor Mount Gasket fits: Late 8N SN: 263843 w/ side mounted distributor, Replaces: 8N6018 USA made FDS1278 $18.95 Governor Compensating Spring & End Assembly fits: NAA thru 960 (1953-58) when using FDS489 governor; 501 thru 4140 4-cyl. gas, LP (1958-64) w/ engine SN: 26402 & up, Replaces: NCA99810A (1/4" - 28 thread) Description / Application Governor Compensating Spring Fits: NAA, Jubilee, Golden Jubilee (1953-54), Replaces: NAA9827B (8.250" o/a length, 0.435" O.D., 0.059" wire dia) USA made NOTE: Mounts between bellcrank & underneath battery tray. Price Governors, parts Basic Carburetor Repair Kit $58.50 $18.95 Economy Carburetor Repair Kit (For Zenith carburetors) fits: 2000, 2600, 3000, 3400, 3500, 3600, 4000, 4100, 4400, 4500, 4600, 5000 (All w/ 3 cyl., 1965 & up) (All w/ 13912, 13913, 13914, 13915, 13916, 13917, 13920) (Fits 267 series Zenith carbs) Order # Price $5.75 Fuel Lift Pump................................................. FDS1990................$35.00 $24.95 $22.25 Economy Carburetor Repair Kit (For Marvel Schebler carburetors) Fits: 800, 900 & Industrial w/ TSX662, 769, 813, 966, 970, 972, 973, 977, 988, 989, 997, 998 Description Order # FDS1921 Aluminum Governor Mount w/ Gasket (Timing Gear Cover) fits: Late 8N SN: 263843 w/ side mounted distributor Replaces: 8N6017B (mount), 8N6018 (gasket) NOTE: Close Out. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application Heavy Duty Radiator (For Pressurized System) Fits: 9N, 2N, 8N, Replaces: 8N8005, 86551430 (25" H, 16" W) NOTE: Does not include drain plug or cap. Engine/Cooling parts FDS212 Economy Carburetor Repair Kit (For Zenith carburetors) fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900, 2000 4-cyl. (All w/ carb 9544, 10850, 11294, 11850, A, 12492, 12493, 12494, 12544, 12566, 13876, 13877, 13878, 13879, 13880) NOTE: Fits 61, 68, 161 series Zenith carbs. Economy Carburetor Kit (For Holley carburetors) fits: 2000 3-cyl thru 5200 w/ Holley # LIST2923-1A, LIST29232, LIST2923-3, LIST3012-2, LIST30132, LIST3658-2, R2923A, R2923-1A, R3012-2A, R3012-3A, R3013-2, R3013-3, R3655A, R3656. Also fits OEM carb #'s: C5NE9510E, C5NE9510G, C5NE9510H, C5NE9510J, C5NE9510K, C5NE9510L, C5NE9510S, C5NN9510F, C5NN9510L, C5NN9510M, C5NN9510N, C5NN9510R NOTE: Includes repair components for acceleration pump, piston assy, spring, retainer. Float valve seat & diaphragm not included. Governors, parts cont... Ford Ford ABC1346 Fits: 2000 3-cyl., 2600, 2610, 3000, 3600, 3610, 4000 3-cyl., 4600, 4610, 5000, 6600, 230A - 5550 gas (All 1965 & up) Replaces: C5NE9350A, D5NN9350B, F2NN9350AA Economy Carburetor Repair Kit - USA made cont... Economy carburetor repair kits contain: Needle & seat Order # Fuel lift pump Carburetor repair kits cont... Can't find your carburetor number? Look on page 334A. Radiator Hood Pad fits: 9N, 2N, 8N Replaces: 2N8032 USA made Radiators, parts continue on next page 157 Radiators, parts cont... Order # ABC455 Price $2.95 Order # Price ABC055 $6.05 Radiator to Front Support Bolt Kit Fits: 2N thru 4000 4-cyl. (1939-64) NOTE: Fits FDS1859, FDS1865 radiators. Includes (2) carriage bolts, nuts, lock washers. Radiator caps Order # FDS039 (Black) FDS343 (Chrome Plated) ABC008 (4 PSI) Price $12.90 $16.25 ABC053 $8.45 ABC054 $9.55 ABC056 $4.50 Description / Application Wing Radiator Cap (For 4 PSI Pressurized system) fits: 9N, 2N, 8N (Will not fit Early 9N & 2N w/ ORIGINAL non-pressurized radiator 1939 thru 12/1943) Replaces: 9N8100, 2N8100A NOTE: Pressurized radiators will have filler neck with slots on the outside for the cap; Non-pressurized radiators will have the slots for the cap on the inside of the radiator neck. FDS1367 FDS1413 $6.35 $8.50 $8.75 Underside view ABC1396 $8.95 (7 PSI) Radiator Cap w/ Gasket (For Pressurized systems) (For radiators w/ 1" filler neck) Fits: 9N thru TW35, NAA thru 4000 4-cyl. up to 1964; Serviceable for E2NN8100BA, E5NN8100AA - 4 PSI instead of 13 PSI Replaces: 2N8100A, ECON8100AA (2.330" O.D., 2.000" tang to tang, 1.500" radiator neck I.D.) NOTE: For 1" tall filler neck ABC1394 $5.25 (13 PSI) Underside view 158 Radiator Hose (Water pump to radiator lower) fits: 9N, 2N, 8N up to SN: 263843, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl. & 4000 4-cyl. series (thru 1964) (All without power steering) Replaces: 312588 (1-1/2" I.D.) Radiator Hose (Water pump to radiator lower) fits: 8N SN: 263844 & up w/ side mounted distributor, Replaces: 8N8286 (1-1/2" I.D.) Radiator Hose (Radiator upper) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) gas, diesel, Replaces: NAA8260B, 310048 (1-1/4" I.D. x 7-3/8" length) Radiator Hose (Radiator upper) Fits: 2000 3-cyl. thru 7700 (All diesels); 2310 - 7610 w/out air conditioning Replaces: C5NN8260A, C5NN8260B, D5NN82601, 81805628, 83907414 (6-7/8" end to bend, 1-1/2" I.D.) Radiator Hose (Radiator Lower) Fits: 2000 3-cyl. thru 7000 gas, diesel EXCEPT 4500, 6000, 6600, 6610, 6640, 6700, 6710 & 6810; Industrials: 230A - 545A (1965 & up), Replaces: 81805637, C5NN8286B, C5NN8286BGV (1.700" I.D.) $2.75 Clamp (For Upper Radiator Hose) Fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64), Replaces: 8BA-8287 (For 1-5/8" O.D. hose) FDS258 $3.60 Clamp (For Upper / Lower 1-3/4" to 2" O.D. Radiator Hose) fits: 9N, 2N & 8N for upper or lower; Fits lower radiator hose only: Jubilee, NAA, 501, 600, 700, 800, 900, 1801 series, 2000 4-cyl., 4000 4-cyl. (thru 1964), Replaces: 60-8287 Order # Price ABC052 $11.50 Description / Application NOTE: Verify belt size before ordering. Thermostat w/ Gasket fits: NAA thru 9600 gas, diesel, Replaces: D8NN8575AA, EAF8575BWG (160º Lo-Temp) USA made FDS2057 Fan shrouds, hardware FDS082 Order # Price ABC058 $14.50 Fan Belt (For tractors w/ generators not w/ alternator conversion) fits: 9N, 2N, (8N up to SN: 263844) w/ front mounted distributor, Replaces: 9N8620B (Notched 11/16" x 46-1/2") ABC059 $11.80 Fan Belt (For tractors w/ generators & alternator conversion) fits: Late 8N w/ side mounted distributor, NAA, Jubilee (1952-54), models w/ Delco 10 SI style alternator, Replaces: 8N8620 (Notched 5/8" x 40") FDS1091 $14.00 Alternator Fan Belt fits: 9N, 2N, (8N up to SN: 263843) (1939-51) (All w/ front mounted distributor) (11/16" x 43") ABC191 $10.30 Fan Belt (For generator only) fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series 4-cyl. gas, diesel (1954-64), Replaces: EAF8577A (33/64" x 40-3/4") FDS1108 $9.99 Alternator Fan Belt fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series thru 1964 (17/32" x 38-1/2") FDS1453 $12.50 Fan Belt (For tractors w/ generators) Fits: (2000 3-cyl. thru 4500 generators only (1965-75)); 6610 (81 thru 3/84) (fan/alt); 8630, 8700 (alternator only thru 12/78), 8730, 8830, (9000 w/ alternator), 9700, TW10 (alternator), TW20, TW30 (A.C. belt); Industrial: 650, 750, 755; A62, A64 (both to 5/76 w/out air) Replaces: C5NE8620B, D4NN10C318A, 86514618, C9NN10C318B, D8NN10C318EA, 81845565 (1/2" x 53-1/4") FDS1458 $12.25 Fan Belt (For tractors w/ alternators) Fits: 2600 thru TW10, Industrials: 230A thru 755, Replaces: D3NN10C318C, D3NN10C318D, 9604339, 81836785, 83976999, 87800127 (17/32" x 54) ABC1648 $15.50 Fan Belt fits: Some 540, 550, 555 (fan w/out 72 amp/ Alt); 976, 5530, 5610, 6700, 6710, A62, Replaces: D8NN8620A, C5TE8620A (17/32" x 45-1/4") IHS235 $9.50 Alternator Belt fits the following w/ 72-80 AMP alternators: Some 540 diesel w/ air conditioning, 550 w/ air conditioning; All w/ cab & 10/1/1985 & later; 5110 5610, 6410, 6610, 7610, 7710, 7810 Replaces: D7NN10C318A, E4NN10C318AA, 86514615 (1/2" x 30-1/4") $1.45 Thermostat Housing Gasket Fits: NAA - 4000 4-cyl. gas, diesel, Replaces: EAF8255A USA made Order # Fan belts Price Description / Application $60.05 Fan Shroud fits: 9N, 2N, 8N Replaces: 2N8146 FDS236 FDS443 $65.95 Fan Shroud fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1953-64) gas, diesel Replaces: NCA8146A NOTE: Made to fit original radiator; must be trimmed to fit aftermarket radiator lower neck. $2.85 Fan Shroud Screw Kit w/ Washers (For FDS082 & FDS236 Fan Shrouds) (#8-32 x 3/8" size) Fan blades Order # Price FDS040 $39.95 Description / Application Fan Blade (4 Blade) fits: 9N, 2N, 8N, NAA, Jubilee, Replaces: 8N8600A Thermostats, parts Order # Price ABC051 $23.75 Toward Radiator Underside view Radiator Cap w/ Gasket (For radiators w/ 3/4" filler neck) Fits: 2000 3-cyl. thru TW35 ABC1398 ABC1398 Replaces: DOHA8100C, 81855444, 83935904 ABC1394 Replaces: E5TH8100AA, E5TH8100AADS, E2NN8100BA, 83956266, 83957211, 83935905 (2.333" O.D., 2.000" tang to tang, 1.096" tall) NOTE: Fits radiators w/ 3/4" tall filler neck. Radiator Hose (Cylinder head to radiator upper) fits: 9N, 2N, 8N, Replaces: 2N8260 (1-7/16" I.D. x 10" length, 1-13/16" O.D.) ABC492 Underside view ABC1398 $5.95 (7 PSI) Description / Application Description / Application Thermostat fits: 9N, 2N, 8N Replaces: B2NN8575A, 9N8575 (160°, 2-1/4" long for 1-1/2" I.D. hose) NOTE: Fits in upper radiator hose, pointed end toward radiator.Will also work in other applications using 1 1/2" I.D. hose. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS250 $39.95 Fan Blade (3 Blade) fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1954-64) gas, Replaces: NCA8600S STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application 159 Cooling parts Cooling parts Description / Application Radiator Mounting Pad fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 4000, 4100, 4600, 4610, 5000, 5600, 6600, 7000, 7600; Industrials: 1801, 3400, 3500, 4400, 4500 Replaces: B9NN8125A, C0NN8125A; Can replace if trimmed C5NN8125A, 594762 (2" x 2", 1/4" thick) NOTE: 2 used per tractor; Sold individually. See website for full application info. Thermostats, parts cont... Ford Ford ABC2282 $3.95 Radiator hoses, clamps Water pumps Amp gauges cont... NOTE: NEW not Rebuilt; no core charge. NOTE: ABC gauges vary from original appearance. Order # Price FDS053 $65.75 For 2" diameter hole. Application Order # FDS407 Fits: 9N, 2N, 8N Replaces: 8N8501A FDS054 ABC466 Fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl series (1954-64) gas, diesel, Replaces: CDPN8501C (4-3/8" o/a pulley length) NOTE: Includes extended single-groove pulley. Ford $66.15 Cooling parts / Gauges $67.50 Fits: Fordson Major, Fordson Super Major, Fordson Power Major gas, diesel (All w/out power steering) Replaces: E1ADKN8501B, 82847510 Fits: Series 2000, 3000, 4000, 5000 & 7000 (1965-75); 2600, 3600, 4100, 4600, 5600, 5700, 6600, 6700, 7600 & 7700 (197581); 2310, 2610, 2810, 2910, 3610, 3910, 4110 & 4610 (1981-2 /1990); 3230, 3400, 3430, 3500, 3930, 4130, 4500, 4630, 4830 & 5030 (3 / 1990 - present); 5110, 5610, 6610, 6710, 7610 & 7710 (1981 - 10/1988) Replaces: DHPN8N513C, DJPN8A513C, EAPN8A513F, EGPN8A513DA NOTE: Includes single-groove pulley, does not include rear housing. Pump has 5/16" & 7/16" dia. mounting holes and replaces earlier style pump w/ 5/16" & 3/8" dia. mounting holes. $54.95 (30-0-30) fits: 9N, 2N, 8N, Golden Jubilee, Jubilee, NAA, NAB, 600, 620, 630, 640, 650, 660, 700, 740, 800, 820, 840, 850, 860, 900, 950, 960 (gas, LP, diesel thru 1957) Replaces: A0NN10670A (Terminal type) Price ABC2238 $14.95 ABC016 $12.50 ABC109 160 $12.50 (0-80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1939-64) Replaces: FAD9273A (1/8" NPT male thread) NOTE: Black bezel. Line adapter sold separately. ABC005 $19.90 (80 PSI) fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1939-64) Replaces: FAD9273A (1/8" NPT male thread) NOTE: Dash mounted. Stainless steel bezel. Line adapter sold separately. (60-0-60) fits same as ABC466 (Terminal type) USA made NOTE: Black bezel. ABC523 $23.95 FDS486 $10.15 Warning lights Order # Price FDS1848 $41.50 FDS2476 $13.95 Description / Application Dash Panel Warning Light Set (Oil Pressure & Generator) w/ Wires & Bulb Holders fits the following w/ 12-volt systems: Dexta, Super Dexta Replaces: E203NE9, E204NE9 (0.550" O.D. lense, 0.822" outer housing dia., 1.715" o/a length, 1.010" flange mounting dia.) NOTE: Red & green lenses. Generator / Transmission Temperature Warning Light w/ 'PAL' nut fits: 501 thru 5110 (1958 & up), Replaces: 310124, B9NN10241B, 373348S (nut) (Flange is 0.875" O.D., 3/4" - 20 NF thread, 0.885" tall) NOTE: See website for full applications listing. Oil pressure gauges, parts Description / Application $14.95 (60-0-60) fits: 9N thru 4000 4-cyl. w/ Alternator system (Terminal type) USA made NOTE: Stainless steel bezel. NOTE: ABC gauges vary from original appearance. Order # FDS401 $14.95 Amp gauges For 2" diameter hole. Price $19.90 FDS488 $10.15 ABC2360 $3.95 ABC2353 $3.95 NOTE: ABC gauges vary from original appearance. For 2" diameter hole. (20-0-20) fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (All Ford models thru 1958), Replaces: FAD10850A (Terminal type) USA made (30-0-30) fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (All Ford models thru 1958), Replaces: FAD10850A (Terminal type) USA made When ordering a dash mounted oil pressure gauge you will also need to order (1) of the oil gauge fittings depending on ABC538 $13.95 the line size to adapt your existing line to the gauge: ABC538, IHS626, ABC2353, ABC2360. Order # Price FDS405 $14.95 Description / Application (0-50 PSI) fits: 9N, 2N, 8N Replaces: 9N9273A (1/8" NPT male thread) NOTE: Black bezel. Line adapter sold separately. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS626 $12.85 Description / Application (50 PSI) fits: 9N, 2N, 8N Replaces: 9N9273A (1/8" NPT male thread) NOTE: Dash mounted. Stainless steel bezel. Line adapter sold separately. Price Description / Application FDS275 Order # $29.95 6-volt Positive Ground Fuel Gauge w/ Black Bezel fits: 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. series (1958-64) Replaces: 310948 (14-122 Ohm) NOTE: Will work w/ FDS199 & FDS200 fuel sending units. For 2" dia. opening FDS276 $29.95 12-volt Negative Ground Fuel Gauge w/ Black Bezel fits: 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. series (1958-64) gas, diesel, Replaces: 310949 (14-122 Ohm) NOTE: Will work w/ FDS199 & FDS200 fuel sending units. Fuel sending units, parts Order # Price FDS200 $27.50 FDS199 $27.50 FDS2694 $12.95 FDS2700 $6.95 Oil Gauge Copper Line Kit (For tractors using 1/8" x 6' copper oil line) (6' - 1/8" line, (2) 5/16 - 24 UNF Nut, (2) compression sleeves, (1) 1/8 - 27 NPTF female to 5/16 - 24 UNF male adaptor) NOTE: Use w/ ABC538 fitting. Oil Gauge Line to Block Elbow (Oil Terminal Block) fits: 9N, 2N Replaces: 9N6722 (1/4" pipe into block, 1/4" tube & 3/16" tube) Oil Gauge Line to Block Elbow fits: 8N (1947-52), Replaces: 8N6722 (1/4" male pipe fitting, (2) 1/4" flare fittings) Oil Gauge Adapter Fitting fits: 2N, 9N, Replaces: 9N18685 (1/8" pipe female to 3/16" tubing female) NOTE: Brass. Oil Gauge Adapter Fitting fits: 8N Replaces: 8N18685 (1/8" pipe female to 1/4" tubing female) Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/8" compression) USA made NOTE: Brass. Use w/ ABC523 line kit. Description / Application Fuel Sending Unit (For 6-volt positive ground, For 12-volt negative ground) Fits: 601 & 701, 2000 4-cyl. series (1958-64) gas, diesel w/ 6-volt or 12-volt systems Replaces: 6-volt: 310938, 12-volt: 310939 (5-1/2" Long, Resistance = 14 - 122 OHM range) NOTE: Will work w/ FDS275 & FDS276 fuel gauges. Does not work w/ O.E.M. style fuel gauges. Fuel Sending Unit (For 6-volt positive ground, For 12-volt negative ground) Fits: 801, 901 & 1801 series, 4000 4-cyl. (1958-64) gas, diesel w/ 6-volt or 12-volt Replaces: 6-volt: 310940, 12-volt: 310941 (8-3/4" long, Resistance = 14 - 122 OHM range) NOTE: Will work w/ FDS275 & FDS276 fuel gauges. Does not work w/ O.E.M. style fuel gauges. Sending Unit Lock Ring Fits: Same as FDS199, FDS200; 6000 Replaces: FEG99275A (2.682" O.D., 1.895" I.D.) NOTE: Retains sending unit to tank. NEW! Sending Unit Gasket Fits: Same as FDS2694 Replaces: B9NN9276A USA made ABC3261 $3.85 Oil Gauge Fitting (For gauges w/out removable fitting) (1/8" pipe thread to 1/4" compression) USA made NOTE: Brass. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Fuel Sending Unit Gasket fits: Ford models (April 1976 & up), 2310 thru 8210, 2600 thru 9700, 3230 thru 8830, TW5 thru TW35; New Holland: TJ275 thru TJ530 Replaces: 104812C3, 83904043, 87713557 (2.850" O.D., 1.715" I.D., 0.132" thick, (5) 1/4" screw holes) USA made NOTE: See website for all applications. 161 Gauges FDS329 $12.25 Description / Application Order # ABC082 Fuel gauges Ford FDS2259 Price $56.95 Fits: Jubilee, NAA (1952 - 54) Replaces: CDPN8501B FDS055 Oil pressure gauges, parts cont... Water temperature gauges, part Cluster gauges, parts cont... NOTE: ABC gauges vary from original appearance. Order # Order # Price Description / Application FDS2673 $49.95 Temperature Gauge Adapter Pipe Fits: 9N, 2N, 8N (3-5/8" long, 1-1/2" O.D; Uses 5/8"-18 UNF temperature gauge lead) NOTE: Installs in upper hose. Slide new adapter pipe in place, drill 2" O.D. hole in dash to mount gauge. Use w/ gauge ABC081 or FDS2424. FDS2424 $29.95 Gauges $42.15 Water Temperature Gauge w/ Bracket Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel except Majors, Dexta Replaces: C3NN18287A (36" lead) NOTE: Black bezel. For 2" dia. opening. Water Temperature Gauge fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel except Majors, Dexta, Replaces: C3NN18287A (36" lead) NOTE: Stainless steel bezel. For 2" dia. opening. Water Temperature Gauge fits: Dexta, Super Dextam, Replaces: 957E10883 (86-1/2" long lead) NOTE: Stainless steel bezel, (Illuminated). For 2" dia. opening Cluster gauges, parts Order # Price FDS389 $99.95 FDS391 FDS1726 FDS423 162 $99.95 $16.50 $16.50 $8.15 Dash Gauge Cluster Assembly fits: 2310, 2600, 2610, 2810, 2910, 3600, 3610, 3910, 4600, 4600 SU, 4610, 5600, 5610 (up to 11/1987), 6600, 6610 (up to 9/1985), 7600; Industrials: 231, 250C, 335, 340, 445, 531, 540, 545, Replaces: 83953544, D8NN10849TB, E5NN10849BA, E7NN10849BA NOTE: Counter-clockwise needle rotation. Cluster Gauge Gasket fits: Same as FDS389, FDS391 Replaces: C5NN10A949C USA made Tachometer Cable w/ Metal Sheath (For FDS389, FDS391 Dash Gauge Cluster Assemblies), Replaces: 82847520, D9NN17365AA, D9NN17365AB (48" long, Square ends) NOTE: Limited supply, replacing w/ nylon sheath. Electric Water Temperature Sending Unit w/ Adaptor Bushing fits the following 1965 & up: 2000 3-cyl. series, 2600, 3000 series, 4600, 4000 3-cyl. series, 4600, 5000 series, 5600, 6600, 7000 series, 7600, 8000, 8600, 9000, 9600, 9700, TW10, TW20, TW30; Industrial: 231 thru 340B, 3400, 3500, 3550, 420 thru 4500, 515 thru 755B Replaces: C4AH10884A, D5NN10884A,B, 81784077, 83903061, 87554838, 87712906 NOTE: Fits either 1/8" or 3/8" thread size as adaptor bushing is including. Tachometers, parts Order # Price FDS058 $39.00 Description / Application Tachometer fits: 8N SN: 245637 & up (1950-52), Replaces: 8N17360A1 FDS147 $15.50 FDS060 $55.00 Description / Application Dash Gauge Cluster Assembly fits: Some 2000, 3000, 3400, 3500, 4000, 4400, 4500, 5000, 7000 (1965 & up) Replaces: C5NN10849L, EHPN10849A NOTE: Clockwise needle rotation. For generator equipped tractors only. Electric Oil Pressure Sensor Switch Fits: 2000 3-cyl. thru TW35 except 6000, TM115 thru TM190, TS90 thru TS115 (1965 & up) (All w/ analog gauges) FDS062 $55.00 Tachometer Cable Assembly w/ Metal Sheath fits: 8N, Replaces: 8N17365 (32-1/2" long, Square ends) Tachometer (4 Speed) w/ OEM style needle fits: Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64) gas, diesel Replaces: C3NN17360N Order # Price FDS1849 $58.50 Description / Application IHS697 $27.95 $28.50 Price Tachometer Cable Assembly w/ Nylon Sheath fits: Dexta, Super Dexta Replaces: 81718522, 957E17365C (34-3/4" long) NOTE: Diesel only. Tachometer Cable w/ Metal Sheath Fits the following w/out cabs 12/1987 & up: 7810, 7910, 8210, 8530, 8630, 8730, 8830, TW5, TW15, TW25, TW35 Replaces: E8NN17365AA (61-1/4" long with square ends) ABC407 $16.99 (2 Gauge, EO = 3/8", L = 10-1/2") ABC415 $18.40 (2 Gauge, EO = 3/8", L = 12") ABC413 $19.15 (2 Gauge, EO = 3/8", L = 14-1/2", 90º terminal ends) ABC1582 $12.15 (2 Gauge, EO = 3/8", EYELET BOTH ENDS, L = 16-1/4") ABC417 $18.50 (2 Gauge, EO = 3/8", L = 21") NOTE: May have to drill eyelet hole bigger on some applications. ABC419 $19.95 (2 Gauge, EO = 3/8", L = 27") Battery covers, trays Order # Price FDS168 $59.95 FDS169 $59.95 FDS1235 $64.29 FDS029 $59.50 Electrical outlet socket, parts Order # Price ABC395 $25.75 ABC1868 $21.10 ABC2285 $4.95 Tachometer (5 Speed) w/ OEM style needle fits: 600, 800, 900, 2000, 4000 4-cyl. series (thru 1964) gas, diesel Replaces: C3NN17360K Description / Application Electrical Outlet Socket (For Implements w/ Lights) Fits: Ford models NOTE: 2 plated brass pins. Connector Plug (For ABC395) (3.045" long, .760" wide, .340" hole dia. for wires) NOTE: Plated brass pins, wires must be soldered or crimped. Electrical Outlet Socket Boot Fits: Tractors using single wire outlet NOTE: 1 wire style. Does not fit ABC395. ABC565 $55.00 $14.95 Tachometer (Select-O-Speed) fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 1964) gas, diesel (All w/ Select-O-Speed transmission) Replaces: C3NN17365A, C3NN17360J Tachometer Cable Assembly w/ Metal Sheath fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 series 4-cyl. (thru 1964) gas, diesel Replaces: B9NN17365B (30-1/2" long) NOTE: Limited supply, replacing w/ nylon sheath. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Battery Cover w/ Access Door & Battery Decal for cover (For 6-volt system) Fits: 8N w/ flat ground cable Replaces: 8N5162 NOTE: Powder coat Ford red. Battery Cover w/ Access Door & Battery Decal for cover fits: 1953-57 6-volt round cables; NAA, Jubilee, 600, 700, 800, 900 series (All 6-volt), Replaces: NAA5162A, NCA10718A NOTE: Powder coat Ford red. Battery Tray w/ Air Cleaner Mounting Bolts fits: 2N (1942-47) Replaces: 2N10732, 2N10734, 2N10735 NOTE: Powder coat gray. Battery Tray (Support Assembly) Fits: 8N (1947-52), Replaces: 8N10732 USA made Battery cables - USA made Heavy Duty; Straight terminals unless otherwised noted FDS396 Description / Application Insulated Battery Cables Tachometer (Tractor Meter) fits: Dexta, Super Dexta, Replaces: 957E17360A, 957E17360D NOTE: Diesel only. FDS1851 Order # Gauges/Electrical parts FDS1852 FDS1491 Description / Application Battery cables - USA made cont... Ford Ford ABC081 $29.95 Price ABC1486 $6.30 Tachometers, parts cont... EO = Eyelet Opening L = Length Order # Price ABC401 $13.90 (2 Gauge, EO = 7/16", L = 6") ABC411 $15.80 (2 Gauge, EO = 7/16", L = 9") ABC405 $17.95 (2 Gauge, EO = 1/2", L = 13") ABC1175 $17.30 (2 Gauge, EO = 7/16", L = 14") ABC421 $22.50 (2 Gauge, EO = 3/8", L = 19") ABC403 $25.85 (2 Gauge, EO = 7/16", L = 24") FDS030 $67.50 FDS1271 $98.10 Specifications Ground Cables (Non-Insulated) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Battery Tray (Support Assembly) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 series (1953-64) gas Replaces: C0NN10732T, NCA10732T USA made NOTE: Powder coat Ford red. Battery Tray fits the following diesel tractors w/ 128 AMP battery: 2000, 2110, 3000, 3100, 3400, 3500, 3550, 4000, 4110, 4400, 4500 (1965-67) Replaces: C5NN10723H 163 Battery hold downs, parts Economy main wiring harnesses w/ instructions cont... Order # Price Description / Application FDS372 $34.95 Battery Retainer fits: 9N, 2N (1939-47) Replaces: 2N10721 (9-1/8" long x 7-1/16" wide) NOTE: Improved version to fit 9N. To use on 9N must also purchase FDS371 battery hold down, pair (9N10728C & 9N10748). FDS371 $38.95 Battery Hold Down, Pair fits: 9N (thru 1942), Replaces: 9N10728C (RH), 9N10748 (LH) NOTE: Sold as a RH / LH pair. FDS370 IHS721 Ford Electrical parts FDS277 $24.50 ABC079 $58.50 $23.75 $6.50 $18.95 $8.95 FDS376 $34.95 Battery Hold Down fits: 8N, Jubilee, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (thru 1964) (All gas & w/ 6-volt battery), Replaces: NCA10718A (9-3/16" long x 7-1/16"wide; Mounting holes c.c. = 10-1/8") USA made NOTE: 16 gauge steel. New & improved quality! J-Bolt (pair) fits: Ford models (5/16"-18" UNC x 10-3/4") (For alternator systems only) Fits: 8N w/ side-mounted distributor & 1-wire alternator, Replaces: 8NL10301 NOTE: Does not include light wires. (For 6-volt generator systems only) Fits: NAA, Jubilee, 600, 700, 800 & 900 series gas (1953-57), Replaces: FDN14401B NOTE: Has flame retardant cloth covering. Light wires included. (For 6-volt generator systems only) Fits: 501, 601, 701, 801, 901 series, 2000 4-cyl., 4000 4-cyl. gas (1957-64) NOTE: Flame retardant cloth covering. Does not include ignition switch wires, light wires or fuel sender wires. Restoration quality wiring harness kits - USA made LH Battery Hold Down Bolt w/ Wing Nut Fits: (NAA, Jubilee when using FDS030 battery tray), 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series gas (1953-64) Replaces: NCA10728-A (3" o/a length) Battery Hold Down fits: 501, 601, 701, 801, 901, 1801, 2000 & 4000 series (thru 1964) (All 4-cyl. & w/ 12-volt system) Replaces: 311099 (For Battery size: 16-1/4" long x 7-5/8" wide; Mounting holes c.c. = 17-1/4) (For 6-volt generator systems only) Fits: 8N w/ side-mounted distributor Replaces: 8N14401C NOTE: Has flame retardant cloth covering. Does not include ignition switch & light wires. Order # Price ABC075 $27.95 ABC076 $27.95 164 (For 6-volt generator systems only) Fits: 8N w/ front-mounted distributor Replaces: 8N14401B NOTE: Has flame retardant cloth covering. Does not include ignition switch & light wires. FDS269 $2.85 EACH Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Rear light wire (6 required) Replaces: 9N17668 FDS267 $3.90 EACH Fits: 8N; Electric wiring to instrument panel support bracket (1947-52) (1 required); Main wiring assembly to instrument panel brace (1 required); Wiring to hood top reinforcement (195052) (3 required), Replaces: 51C14197 FDS268 $4.30 EACH FDS270 $10.80 EACH Fits: 8N, NAA, Jubilee (1947-54); Rear light wire to brake actuating shaft (2 required), Replaces: 8N14565 USA made $4.65 EACH Fits: 2000 3-cyl thru 4140 (1965 & up); Serviceable for 8N thru 4000 4-cylinder (up to 1964); Rear light wire to brake actuating shaft (2 required) Replaces: 354475S2, 380568S36 ABC545 w/ soldered terminals. Restoration quality. Application Order # Price available by special order. Call or email for ABC011 (6-volt) $19.95 ABC509 (12-volt) $19.99 FDS072 $29.95 Order # FDS470 FDS472 Price FDS1137 $4.65 ABC119 $30.50 ABC348 $53.75 ABC3161 $4.95 Fits: 8000 thru 9600 & Industrial Replaces: C7NN14411A USA made Application $148.20 (For 6-volt generator systems only) Fits: 9N, 2N w/ single terminal generator Replaces: 2N14401, 9N14401B $171.60 (For 6-volt generator systems only) Fits: 8N w/ front mounted distributor up to SN: 263843, Replaces: 8N14401B Description Order # Order # Price ABC1862 $30.00 6-volt Cigarette Lighter w/ Socket Fits: 8N, NAA w/out bracket w/ 6-volt system, Replaces: 8N9004601 NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". IHS949 $30.00 12-volt Cigarette Lighter w/ Socket Fits: 8N, NAA w/out bracket when converted to 12 volt NOTE: Anodized aluminum knob engraved w/ the word "LIGHTER". FDS2869 $234.00 Fits: 501 thru 981 series, 1811, 2000 4-cyl., 4000 4-cyl. series gas (1958-64) (All using charge indicator light & generator) Replaces: C3NN14401 FDS3371 $395.00 NEW! Fits: 2000, 3000, 3400, 3500, 4000, 4400, (4500 except light harness) (All 3-cyl. gas, 1965 & up w/ generator system) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm IHS1784 $24.95 Description / Application Distributor Coil Retainer Wire fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor, Replaces: 9N12137 12-volt Distributor Coil fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor NOTE: Must use w/ABC366 resister. HOT" Coil (55000-volts) fits: Ford models w/ 12-volt system EXCEPT front mount distributor tractors NOTE: Maximum voltage for faster starting, reduced plug fouling & longer plug life. Must use w/ ABC366 resistor. NEW! Coil Bracket fits: ABC011, ABC509 & ABC348 coils USA made Cigarette lighters $183.50 (For 6-volt generator systems only) Fits: NAA, Jubilee, 600, 700, 800, 900 gas series (1953-57) w/out fuel gauge Replaces: FDN14401B, FAF14401B NOTE: If customer has a fuel gauge will need to reuse gauge & sending unit wires. Price Fuse Holder...........................................................ABC389.............$10.95 NOTE: Rated at 20 AMP; Fits in 1/2" hole. Distributor Coil (Metal Housing) & Mounting Bracket fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series; Fits Ford models w/ barrel-type coil (All w/ side mounted distributor) ABC011 Replaces: D3PF12029AA, E8T12029BA ABC509 Replaces: D5TE12029AB NOTE: ABC509 includes ABC366 resister. See website for full applications. 6-volt Distributor Coil fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor, Replaces: 9N12024 Fits: 8N; Electric wiring to instrument panel brace (1 required) Replaces: 8N14197 USA made Fuse holder a quote. Description / Application Coils, Resistor, parts Alternator conversion harnesses also FDS474 (For 6-volt generator systems only) Fits: 9N, 2N w/ single terminal generator Replaces: 2N14401, 9N14401C NOTE: Has flame retardant cloth covering. Does not include ignition switch & light wires. Fits: 9N, 2N, 8N (1939-52) Headlight wiring to hood (7 required) Replaces: 358297S wires and diagram. Original style braiding Fits: 8N w/ side mounted distributor SN: 263844 & up (1950-52) Replaces: 8N14401C Application Price $1.60 EACH NOTE: Wiring harness kits include light FDS1703 $189.99 (For 6-volt generator systems only) Economy main wiring harnesses w/ instructions Order # FDS271 ABC366 $7.75 ABC277 $8.95 Universal 12-volt Voltage Resistor (2-Terminal Style) fits: Ford models NOTE: Used to step down 12-volt battery. Limits voltage to coil when using 12-volt battery. 1.5 OHMs on 6-volt battery to 4.0 OHMs for 12-volt battery. Resistor gets very hot. Dust Cover 12-volt Cigarette Lighter w/ Socket Fits: 2610 thru TW35 Replaces: E3NN15760AA NOTE: Black plastic knob w/ the word ''LIGHTER'' in white print. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Dust Cover Assembly fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas (thru 64), Replaces: FAA12239A NOTE: For side mount distributors, includes gasket. Ignition parts continue on next page 165 Electrical parts ABC474 ABC077 $27.95 Description / Application Ignition parts Ford FDS421 Price $9.95 Battery Hold Down Rod fits: 2N (1943-47), 8N, NAA, Replaces: 2N10728, 8N10728 FDS369 Order # Wiring clips Ignition parts cont... Order # Price Ignition parts cont... Description / Application Order # Price Distributors, caps, parts ABC061 Description / Application $14.99 $11.00 FDS310 $78.50 ABC062 $262.50 Distributor Shaft (Cam & Weight Assy) Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12187 ABC159 ABC128 ABC060 $8.00 $4.50 $7.15 Distributor Cap fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series w/ original style side mounted distributor (thru 1964), Replaces: NCA12106A Distributor Cap Clip / Clamp fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64), 6000 (All w/ side mounted distributor), Replaces: 7RA12144 Rotor Clip fits: Late 8N SN: 263844 & up, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. gas (thru 1964), 6000 (All w/ side mounted distributor) Replaces: 8N12213 USA made Distributor Cap fits: 2000, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4100, 4400, 4500, 4600, 4610 3-cyl. gas (1965-80) Replaces: C5NF12106A, E3NN12106A, 83937262 ABC064 166 FDS316 $4.65 $4.40 4-Piece Distributor Gasket Kit Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 9N12104 USA made $14.95 Spark Plug Wiring Set fits: 8N w/ side mounted distributor (generator on left side) USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Pre-Assembled No cutting or fitting required. FDS1756 $5.95 Spark Plug Wire Grommet fits: 8N SN: 263844 & up (1950-52) w/ side mounted distributor, Replaces: 7RA12297 (.970" o/a length, .708" hole I.D., .880" center O.D., 1.180" end O.D.) NOTE: Holds 4 plug wires together. $14.95 Side Mount Distributor (NEW not Rebuilt) w/ Slotted Drive Shaft Fits: NAA, Jubilee, Replaces: FAC12127D FDS317 FDS3253 FDS281 FDS3329 Distributor Breaker Plate Retaining Clip Fits: 9N, 2N, (8N up to SN: 263843) w/ front mount distributor Replaces: 91A12146 FDS467 FDS331 $248.50 $248.50 $29.95 FDS1754 $4.85 $2.95 Side Mount Distributor (NEW not Rebuilt) Using Hex Drive Shaft Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 1964) Replaces: FDN12127A, 311185 NOTE: 1/4" hex drive end. NEW! 5-pc. Distributor Bushing & Shim Kit fits: Jubilee thru 4000 4-cyl. (1953-64) USA made NOTE: Bushing must be sized to shaft after installation. FDS2539 $39.95 Primary Conductor (For side mounted distributors) fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64) Replaces: 8N12209 NOTE: Copper. $284.30 Front Mount Distributor fits: 9N, 2N, (8N up to SN: 263843) (1939-50) Replaces: 9N12100 FDS1144 Side Mount Distributor (NEW not Rebuilt) fits: 8N SN: 263844 & up (195052), Replaces: 8N12127B NOTE: Has external oiler & terminal for coil wire. Original Style $199.95 NEW! Distributor (New, not Rebuilt) Fits: 2000, 2600, 2610, 3000, 3400, 3500, 3600, 3610, 4000, 4100, 4400, 4500, 4600, 4610 (All 3-cyl. gas) (1965-80) Replaces: F1NN12100AA NOTE: This is an improved design using a mechanical advance. Tune-up parts interchange with the original. See website for all applications. FDS2543 $49.95 Spark Plug Wiring Sets, parts FDS149 $12.50 Spark Plug Wiring Set w/ 90° boots Fits: 9N thru 4000 4-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application Order # Spark Plug Wiring Sets, parts cont... ABC326 $19.85 Spark Plug Wiring Set fits: NAA, Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000 4-cyl. series (1953-64) USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Pre-Assembled - No cutting or fitting required. Spark Plug Wire Rubber Retainer Fits following gas, LP: 8N SN: 263844 & up (1950-52) w/ side mounted distributor (1 used); NAA thru 4000 4-cyl (1953-64) (2 used), Replaces: 7RA12271 (.857" length, .125" thick, .508" hole I.D.) USA made NOTE: Sold individually. On 8N holds #3 & #4 plug wires together (1 used). On NAA & up holds #1 & #2 and #3 & #4 plug wires together (2 used). Spark Plug Wire Set fits: 2000 3-cylinder thru 4610 (1965-80) Replaces: DDPN12259A, DHPN12259A USA made NOTE: Silicone Core. Waterproof neoprene. Pre-assembled, no cutting or fitting required. Must use w/ aftermarket coil ABC509 etc., as coil wire boot will NOT fit original Ford coil. Spark Plug Wire Set fits: 5000, 5100, 5190, 5200, 5340, 6600; Industrial: 5500, 5550 4-cylinder (1965 & up) Replaces: D7NN12287A, DHPN12259A USA made NOTE: Silicone core. Waterproof neoprene. Pre-assembled, no cutting or fitting required. Must use w/ aftermarket coil #ABC509 etc., as coil wire boot will NOT fit original Ford coil. Price Description / Application Spark Plug Wiring Sets, parts cont... ABC2863 $19.85 Spark Plug Wiring Set w/ Straight Boots Fits: 6-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. Spark Plugs (Autolite) NOTE: Check spark plug specifications before ordering as some models may use more than one type. ABC172 $3.95 Fits: 9N, 2N, 8N w/ front mount distributor (1939-50) ABC172 specifications: 14 mm thread, 7/16" reach, 13/16" hex, Autolite 437, Plug Gap .025" ABC322 $3.75 Fits: 8N w/ side mount distributor, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cylinder series (thru 1964) Electrical parts Electrical parts FDS224 Distributor Cap Spring Clip fits: 9N, 2N, (8N up to SN: 263843) w/front mount distributor, Replaces: 9N12144 NOTE: 2 used per tractor; Sold individually. Price Ignition parts cont... Ford Ford ABC063 $3.95 Order # Distributors, caps, parts cont... Distributor Cap fits: 9N, 2N, (8N up to SN: 263843) (1939-50) w / front mount distributor, Replaces: 9N12106C FDS1150 Ignition parts cont... ABC322 specifications: 14 mm thread, 7/16" reach, 13/16" hex, Autolite 216 Plug Gap .025" ABC323 $3.80 Fits: 2000 3-cylinder, 2600, 2610, 3000, 3600, 3610, 4000 3-cylinder, 4600, 4610, 5000 (1965 & up) ABC323 specifications: 14 mm thread, 3/4" reach, 13/16" hex, Autolite 405, Plug Gap .020" Ignition Tune-Up Kits FDS473 $19.95 Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor NOTE: Kit includes: Points, condenser & rotor; Point Gap .015 FDS137 $32.60 FDS476 $12.65 FDS138 $25.90 Spark Plug Wiring Set w/ 90° boots Fits: 6-cyl. models USA made NOTE: Copper core w/ aluminum coating to prevent corrosion, waterproof neoprene. Cut to length. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Fits: 9N, 2N, (8N up to SN: 263843) w/ front mounted distributor NOTE: Kit includes: Points, condenser, rotor, spark plugs & ABC064 4-pc distributor gasket kit; Spark Plug Gap .025, Point Gap .015 Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1950-64), 6000 w/ side mounted distributor NOTE: Kit includes: Points, condenser & rotor; Point Gap .025 Fits: 8N SN: 263844 & up, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1950-64) w/ side mounted distributor NOTE: Kit contains: Points, condenser rotor & spark plugs; Spark Plug & Point Gap .025 Ignition parts continue on next page 167 Ignition parts cont... Order # Price Generators, parts cont... Description / Application Ignition Tune-Up Kits cont... FDS420 $28.35 Fits: 2000, 2110, 2600, 2610, 3000, 3600, 3610, 3900, 3910, 3930, 4000, 4110, 4600, 4610 (1965 & up) (All 3-cyl.). Industrials: 3400, 3500, 4400, 4500, 230A, 231, 334, 340, 340A, 420, 445, 515, 531, 535, 540, 540A, 545 w/ original Autolite distributor (All 3-cyl.) NOTE: Kit includes: points, condenser, rotor & spark plugs; Spark Plug & Point Gap .025. $5.95 FDS471 $5.95 Price FDS263 $19.95 Fits: 8N SN: 263844 & up, NAA thru 4000 4-cyl. series (1950-64), 6000 (All w/ side mount distributor) Replaces: C0NN12200A, FAB12200A ABC366 Price $28.95 FDS403 $112.95 Generator (NEW not Rebuilt) w/ Tach Drive w/out Pulley fits the following 12-volt: 2000, 3000, 3400, 4000, 4400, 4500, 5000, 7000, 8000, 9000 (1965-75) Replaces: C7NN10000C FDS436 $26.25 ABC072 $24.95 ABC3202 $14.95 Description / Application FDS434 $12.15 $7.75 ABC519 $14.45 Terminal Junction Block fits: 8N SN: 263844 & up w/ side mounted distributor, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64) Replaces: 8NNN14448A Universal 12-volt Voltage Resistor (2-Terminal Style) fits: Ford models NOTE: Used to step down 12-volt battery. 2 terminal style. Reduces voltage to distributor points. 2.0 Ohms of resistance. Resistor gets very hot. FDS298 168 Price $160.35 Description / Application FDS435 $29.95 NEW! Generator Pulley, Keyed Fits: 8N 1948-52 using keyed generator pulley, Replaces: 8N10130A (0.670" shaft inside dia., 3 5/8" O.D, 9/16" belt width) Generator Tag w/ 2 Rivets fits: Tractors & Industrial using Autolite generator (2.300" o/a length, .732" wide, .145" dia. Rivet hole, 2" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. Order # Price ABC071 $34.95 $28.95 6-volt Voltage Regulator (3-Terminal) Fits: 8N SN: 263844 & up (1950-52) w/ side-mount distributor Replaces: 8N10505C STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm 6-volt Voltage Regulator (3-Terminal) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas (1953-64) Replaces: FAG10505A 12-volt Voltage Regulator (3-Terminal) Fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series gas, diesel (1953-64), Replaces: C0NF10505A Order # Price Description / Application ABC404 $34.95 Universal Mounting Kit fits: Ford models except 9N, 2N, 8N NOTE: Used when switching from a generator to an alternator. Does NOT include top adjusting bracket. May have to be drilled or modified for your application. ABC529 $23.50 Universal Top Adjusting Bracket Fits: Ford models (7/8" wide, 1-1/2" offset, 8-1/4" from farthest end of slot to center of mounting hole, 3-3/4" slot length, 3/8" mounting hole) NOTE: Customer may need to trim to fit some models. 12-volt Voltage Regulator (6 Spade Terminal) fits: 2000, 3000, 3400, 4000, 4400, 4500, 5000, 7000, 8000, 9000 (1965-75) Replaces: C7NN10505E, D0NN10505A, D0NN10505B See the following for custom bracket kits Alternator conversion kits, parts NOTE: The following alternator conversion kits will update NOTE: Alternators are NEW not rebuilt • To convert older 6-volt tractors to 12-volt charging system. Does not 6-volt to 12-volt system. For negative ground systems. include 12-v fuel gauge, 12-v sending unit, 60 amp ammeter Order # Price ABC535 $149.95 ABC2315 Description / Application Mini 41 Amp Maximum Alternator w/ Pulley & Diode fits: Ford models requiring a smaller dia. alternator for clearance (4-1/2" housing dia., 2-1/2" pulley dia., 3/8" belt width) NOTE: For 12-volt negative ground systems only. This alternator has a built in 3-wire internal regulator that requires an excitation circuit. Includes instructions. $34.95 Alternator Pulley (For ABC535) (0.587" ID, 1.437" o/a length, 3" pulley O.D., 5/8" belt width) USA made ABC418 $99.95 Description / Application 6-volt Voltage Regulator (3-Terminal) w/ Mounting Plate fits: 8N up to SN: 263843 w/ front mount distributor Replaces: 8N10505B Description / Application Alternators, parts Voltage regulators ABC073 Generator (NEW not Rebuilt) w/ Pulley Fits: 9N (1940 & up), 2N Replaces: 2N10000 NOTE: Single-terminal. Generator Cut-Out Assembly Fits: 9N, 2N (1939-47) Replaces: B0NN10505A Generator Pulley w/ Keyway (For 11/16" belt only) fits: NAA, Jubilee Replaces: FAC10130B Generators, parts Order # ABC1164 $33.50 $32.50 $19.95 Resistor Assembly fits: 8N up to SN: 263843, Replaces: A8NN12250A (3/16" machine screw mount OEM style) FDS397 Order # ABC074 Generator Pulley (Threaded) Fits: 9N, 2N, Replaces: 9N10130B Resistor Assembly fits: 9N, 2N Replaces: A8NN12250B (5/16" machine screw mount OEM style) FDS264 Description / Application 12-volt Generator (NEW not Rebuilt) w/ out Pulley & Nut fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl. & 4000 4-cyl. series (1953-64) Replaces: C4NN10002B, B9NF10002A, D4PF10002BA Fits: 9N, 2N, (8N up to SN: 263843) (All w/ front mount distributor) Replaces: B2NN12200A, 9N12200 Electrical resistor assys., parts Order # Price $149.50 ABC1426 63 Amp Alternator w/ Pulley Fits: Ford models (6-1/4" housing dia., 2-1/2" pulley dia., 5/8" belt width) NOTE: For 12-volt negative ground systems only. Simple 1-wire alternator hook up: Run a wire from alternator through amp gauge to positive side of battery! Must rev engine to 800 - 850 RPM in order for unit to self excite. & 12-v light bulbs, but can be purchased separately. Brackets can also be purchased separately. Order # Price Description / Application FDS1084 $177.95 Alternator Conversion Kit (For negative ground systems) fits: 9N, 2N, (8N up to SN: 263843) (1939-51) (All w/ front mount distributors) NOTE: Kit contents: Alternator, USA made bracket kit, belt, resistor, 12-volt coil, USA made wiring harness & instructions. FDS1089 $45.00 Alternator Bracket Kit fits: 9N, 2N, (8N up to SN: 263843) (1939-51) (All w/ front mounted distributor) USA made FDS1084B $4.95 Bolt Kit only (For FDS1084) FDS1097 $174.95 FDS1099 $45.00 $19.95 Pulley only (For ABC418) (.670" shaft dia., 3-3/16" pulley O.D., 1/2" belt width) ABC495 $19.95 Pulley only (For ABC418) (.670" shaft dia., 2-1/2" pulley O.D., 5/8" belt width) Alternator Conversion Kit (For negative ground systems) fits: 8N SN: 263844 & up w/ side mount distributor NOTE: Kit contents: Alternator, bracket kit, internally resisted 12-volt coil, USA made wiring harness & instructions. Must use existing fan belt. Alternator Bracket Kit fits: Late 8N (SN: 263844 & up) w/ side mounted distributor Alternator conversion kits continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 169 Electrical parts Electrical parts FDS469 Order # FDS1157 Alternators, parts cont... Ford Ford Rotor Buttons Voltage regulators cont... Alternator conversion kits, parts cont... Order # FDS1102 Price $174.95 $45.00 FDS1106 $174.95 Order # Price Alternator Conversion Kit (For negative ground systems) fits: NAA, Jubilee, Golden Jubilee NOTE: Kit contents: Alternator, internally resisted 12volt coil, USA made wiring harness & instructions. Must use existing alternator belt. ABC517 $14.45 Alternator Bracket Kit fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series thru 1964 Alternator Conversion Kit (For negative ground systems) fits: 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series gas (thru 64) NOTE: Kit contains alternator, bracket kit, belt, internally resisted 12-volt coil, USA made wiring harness & instructions. Must also purchase 12-volt fuel gauge FDS276 & 12-volt light bulbs. Starter Solenoid Relay Assemblies, parts ABC068 ABC069 FDS282 $12.75 $15.75 $20.40 Starters, parts Order # Price FDS297 $146.30 ABC129 ABC227 FDS324 FDS390 170 $28.95 $39.30 $165.95 $174.95 Description / Application ABC139 6-volt Starter (NEW not Rebuilt) w/ Drive (Bendix) fits: 9N, 2N, 8N Replaces: 8N11001 (starter), 52-11350 (drive) Ratchet Style Starter Drive (Bendix) Assembly fits: 9N, 2N, 8N (1939-52) Replaces: 52-11350C-PD ABC508 Ratchet Style Starter Drive (Bendix) Assembly fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 series 1953-64 (All 4 cyl. gas, LP, diesel) Replaces: C1AF11350A Starter w/ Drive (Bendix) fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 1811, 2000, 4000 series (1953-64) (All 4 cyl. gas, LP, diesel), Replaces: C3NF11002D, C3NF11001B, C3NF11002E 12-volt Starter (New not Rebuilt) w/ Solenoid & Drive (Bendix) fits: 231, 335, 340, 445, 531, 540, 550, 555, 2000 3-cyl., 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000 3-cyl., 4600, 4610, 5000, 5600, 5610, 6600, 6610, 7000, 7600, 7610, 7710, 8000, 8600, 9000 (All diesel1965 & up), Replaces: D4NN11000BR & D8NN11000CE NOTE: Diesel only, No returns if nose cone is broken. Description / Application Starter Tag w/ 2 Rivets fits: Tractors & Industrial using Autolite starters (2.955" long, .915" wide, .140" dia. rivet holes, 2.650" c.c. rivet holes) USA made NOTE: Anodized aluminum. Customer must stamp numbers. $15.90 $5.35 ABC506 $5.30 FDS340 $7.50 Starter Solenoid Relay Assembly (Saddle Mount) (3 Post) fits: 8N (1947-52) Replaces: 8N11450 NOTE: 6-volt or 12volt system. Starter Solenoid Relay Assembly (3 Post) Flat Mount fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57) w/ 4-cyl. gas engine Replaces: NCA11450A NOTE: 6-volt or 12-volt system. Fits Ford applications only. 12-volt Starter Solenoid Relay Assembly (Flat Mount) (4 Post) fits: 501, 601, 701, 801, 901, 1801, 2000, 4000 4-cyl. series (1958-64) except Lucas equipped & 6000 gas; Activates manifold heater on 6000 diesel, Replaces: 311006, 311007 12-volt Starter Solenoid Relay Assembly (Flat Mount) (4 Post) fits: 2000, 3000, 4000 gas (1965 & up) w/ 4-1/2" dia. starter Replaces: D2AF11450AA NOTE: Do not use the "I" terminal if replacing a 3-terminal switch. Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 18 NC starter terminals) NOTE: Brass. Order # Price ABC066 $16.40 Manual Starter Switch (Base Mount) (For 7/8" hole) fits: 9N up to SN: 12499 (1939-40), Replaces: 9N11450A (Dash mount for 1-3/4" mounting hole) NOTE: Will work on 6 or 12 volt. FDS313 $24.95 Starter Push Switch fits: 9N SN: 12500 & up, 2N, Replaces: 9N11450B (2-3/4" c.c. bolt holes) NOTE: Restoration quality. ABC067 $24.95 Starter Push Switch w/ Mounting Gasket Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1947-64) (All w/ standard transmission) Replaces: 8N11500 NOTE: Does not fit Select-O-Speeds. Will work on 6 or 12 volt systems. ABC233 $12.50 FDS342 $5.95 $11.99 Rubber Cover (For Starter Push Switch) Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1947-64), Replaces: 8N11113 Rubber Cover (For Battery Cable to Starter Solenoid) fits: 8N, NAA, Jubilee (1947-54), Replaces: 86H14321A, C0NN14321A, C7NN14321A, S115407 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price FDS330 $14.40 FDS400 $2.95 FDS1449 $12.95 Starter Push Switch, Extra heavy duty momentary push button switch Fits: Ag & Light Industrial equipment (Mounting stem 5/8" - 32 thread, 21/32" long) NOTE: Depress button: ON; Spring return: OFF. Two screw type terminal. Up to 35 V (DC), rubber cap for dust and moisture protection. ABC489 $8.20 $15.95 Universal 2-Position Push / Pull Starter Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. This can be used on battery ignition systems only. Magneto Push / Pull Ignition Switch (O.E.M) fits: Ford models w/ Magneto Ignition NOTE: One screw type terminal; Out: ON; In: OFF. Ignition / Key Switches ABC065 IHS760 ABC400 $12.95 $19.95 $14.85 Ignition / Key Switch w/ 2 Keys Fits: Ford models (1939-64) Replaces: 8N3679C NOTE: Will not fit Dexta & Fordson Major. Ignition / Key Switch w/ 2 Keys & Mounting Nut fits: Ford models (1939-64) Replaces: 8N3679C USA made NOTE: Will not fit Dexta & Fordson Major. 2 spade terminal switch Description / Application Ignition / Key Switches cont... Ignition / Key Switch (For tractors w/ cold start) fits: 230A, 231, 233, 234, 333, 334, 335, 420, 515, 530A, 531, 532, 535, 550, 650, 750, 2000 thru 7000, 7100, 7200, 7410, 7600, 2600 thru 7700, 7700 & 7710, 8000 thru 9700, TW10, TW20, TW30, 2310 thru 4610, 5110 thru` 7710, 7810 thru 8210, 8530 thru 8830, TW5 thru TW35, 3230 thru 4830 except Compacts (All 1965 & up) Replaces: C5NN11N572A, D5NN11N572A, E8NN11N501AA NOTE: Seven spade terminal. LUCAS Ignition Key fits: Same as FDS330 Replaces: E7NN11603AA Neutral Safety Starter Switch Fits: 2000 3-cyl. thru TW35; Industrials: 230A thru 755B (1965 & up), Replaces: C5NN7A247C, C7NN7A247A, 81817901 Light switches Order # Price FDS445 $16.10 Fused Light Switch w/ Metal Knob Fits: 9N, 2N, 8N (thru 1949) Replaces: 9N11652 Like original NOTE: Uses pig tail connectors. FDS349 $14.95 Fused Light Switch (For Headlight or Tail Light) fits: Late 8N (1950-52), NAA, Jubilee (1953-54); Early 600, 700, 800, 900 (All up to SN: 10614), Replaces: 8N11654B NOTE: Two screw type terminals. Like original. MFS119 $14.95 Work Light Toggle Switch (For Tail Light) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64), Replaces: 21C13740, 8N1374 NOTE: Two spade terminals. FDS351 $14.95 Light Switch (For Headlight or Tail Light) Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1955-64) Replaces: FDN11654A NOTE: Two screw type terminals. Like original. ABC398 $8.20 Universal 2-Position Push / Pull Light Switch fits: Ag & Light Industrial equipment (10-24 knob thread) NOTE: 30 AMP, 3/8" dia. thread, two screw type terminals, non-fused. JDS631 $12.95 Universal 3-Position Fused Push / Pull Starter & Light Switch fits: Ag & Light Industrial equipment w/ voltage regulator NOTE: 15 AMP, five terminals, fused, 7/16-20 stem. 10-24 N.C. black plastic knob. Push / Pull Switches ABC398 Covers FDS341 Order # Push Button Switches Starter or Solenoid Terminal Repair Stud (For tractors using 5/16" x 24 NF starter terminals) NOTE: Brass. Rubber Cover (For Starter Control Wire Terminal - Goes on wire to solenoid) Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (1947-64), Replaces: 8N11115 Description / Application Starters, parts cont... Electrical parts Electrical parts Description / Application Starters, parts cont... Ford Ford FDS1103 Starters, parts cont... Ignition / Key Switch w/ 2 Keys Fits: Ag & Light Industrial equipment (3/4" dia. thread) NOTE: Four stud type terminals. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application 171 Headlights, parts Headlights, parts cont... Order # Need light components? See page 174. Order # Price FDS177 (6-volt) $63.95 FDS213 (12-volt) $63.95 $49.95 FDS193 (12-volt) $49.95 ABC450 (6 volt) $14.95 ABC443 (12 volt) $14.95 Electrical parts Ford FDS192 (6-volt) Description / Application Complete Headlight Assembly Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series FDS192 Replaces: 310066 FDS193 Replaces: 310068 (5-3/4") Sealed Beam Lamp (For FDS177, FDS213, FDS192, FDS193) ABC450 Replaces: 4019 ABC443 Replaces: 4419 (5.625") NOTE: Original style. Rear view IHS647 $34.95 12-volt Headlight Assembly Fits: 2600 & up (4-1/2") NOTE: Post is out of back w/ wires thru post. ABC3028 $12.50 ABC3035 $24.50 ABC527 172 $4.95 Rubber Light Bezel fits: Same as IHS647 (5.250" O.D., 3.675" I.D., 1.125" wide 3 outer tabs to attach rubber ring to light housing & 4 inner tabs to secure to sealed beam) NEW! Rubber Light Bezel (For 'Hobbs' Late style w/ glare guard) fits: Tractors w/ 'Hobbs' round lights & 5.250" O.D. bezel when extended glare guard bezel is desired (5.250" O.D., 3.675" I.D., 2.430" wide, 3 outer tabs & 4 inner tabs) NOTE: Will fit IHS647 light. Available Spring 2016! Concaved Mounting Washer Fits: Same as IHS647 (2-1/4" O.D., 9/16" center hole) $8.50 ABC460 $16.50 (Lo Beam) Complete Headlight Assembly Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) FDS177 Replaces: 2N13006C FDS213 Replaces: 2N13005C (5-3/4" sealed beam style) NOTE: Stamped "TRACT-O-LITE" on housing. Price ABC353 (Hi Beam) Rear view Description / Application 12-volt Sealed Beam Lamp Fits: Same as IHS647 ABC353 Replaces: 4411, 87779219 ABC460 Replaces: 4110 (4.365" O.D.) NOTE: Check bulb number before ordering. See website for additional applications. FDS256 $18.80 Headlight Ring fits: Some 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (thru 64), Replaces: C0NN13045A (5-3/4" O.D., 3/4" wide) NOTE: Check width measurement before ordering. Fits FDS177 & FDS213 lights. FDS460 $26.80 Headlight Ring fits: Some NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000, 4100, 4110, 4600, 4610, 5600, 5700, 6600, 6700, 7600, 7700 Replaces: C0NN13045B (5-3/4" O.D. x 1" wide) NOTE: Check width measurement before ordering. FDS098 (RH) $17.95 FDS099 (LH) $17.95 FDS272 $10.95 EACH ABC480 $8.95 FDS494 $5.95 ABC359 $12.00 Headlight Wing Fits: 9N, 2N, Early 8N (1939-49) FDS098 Replaces: 9N13472 FDS099 Replaces: 9N13473 Headlight Bracket (Round) fits: Late 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 4000, 5000, 7000 series; Will also fit 9N, 2N, Early 8N, but not correct, Replaces: 8N13472 NOTE: LH & RH are the same; Sold individually. Inner Reinforcement Plate (For Headlight Wing) fits: 9N, 2N, Early 8N (1939-49) Replaces: 9N13102 USA made NOTE: Clear zinc-plated. Headlight Reinforcement Washer Fits: Late 8N - 7700 (1950 & up) Replaces: FAA13102A (2-1/4" O.D., 1/2" center hole) 12-volt Bulb (Double contact) w/ Ring Fits: 1300, 1500, 1700, 1900 Replaces: SBA385120010 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Dash lights, parts Fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57), Replaces: NCA13771A, C3NN14662A FDS293 FDS296 Tail, work lights, parts cont... Price $65.05 6-volt Duolamp Tail Light Assembly, Plastic Lens & Bulb fits the following tractors: 340A, 420, 445, 445A, 501, 535, 540A, 540B, 545, 601, 701, 801, 901, 1801, 2000 3 & 4-cyl 2310, 2600, 2610, 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 3 & 4-cyl, 4000SU, 4100, 4110, 4400, 4500, 4600SU, 4610, 6000 (1957 & up) Replaces: 310064, C5NN13403A, D2NN13403A NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. See light chart G for subcomponents. FDS452 $14.95 Plastic Tail Light Lens fits: Some NAA, 501, 600, 700, 800, 900, 2000, 2600, 2310, 3000, 3600, 3610, 3910, 4000, 4000 SU, 4100, 4200, 4600, 4600 SU, 4610, 5000, 5100, 5200, 5600, 5610, 6000, 6610, 7000, 7100, 7200, 7600, 7610; Industrials: 231, 335, 340, 445, 531, 540, 3400, 3500, 4400, 4500, Replaces: FDV13450A (4" O.D., 3-1/8" c.c. bolt holes) USA made NOTE: Red plastic. ABC544 $17.15 12-volt Fender & Cab Warning Light w/ 2 amber lenses, double contact bulb & black die cast base Serviceable for 2000 3-cyl. thru TW30 (All using round warning light), Replaces: C5NN12N359E, D4NN13N359A, D6NN13N359B, D9NN13N359AA (4" dia.) ABC548 $9.95 ABC355 ABC356 Description Order # Price 6-volt Dash Light Assy (For 1-1/8" dia. hole)...... FDS293.........$38.50 12-volt Dash Light Assy (For 1-1/8" dia. hole).... FDS296.........$38.50 6-volt Bulb only (For 1-1/8" dia. hole).................. ABC355........$1.45 12-volt Bulb only (For 1-1/8" dia. hole)................ ABC356........$0.75 Tail, work lights, parts Need light components? See pg. 174. Order # Price FDS172 $44.50 $44.50 FDS444 $65.05 FDS446 FDS448 $42.95 $65.05 12-volt Tail Light Assembly (Solid Bucket) w/ Bulb Serviceable for 9N, 2N, 8N, NAA, Jubilee, 600, 800 (1939-57), Replaces: 13402, 13466, 13448, 13450, 13560, 30178-S, 9N13404 NOTE: Economy style. See light chart F for subcomponents. 12-volt Tail Light Assembly (License Lamp Window) w/ Bulb Serviceable for 9N, 2N, 8N, NAA, Jubilee, 600, 800 (1939-57), Replaces: 13403, 13448, 13450, 13560, 31788-S NOTE: Economy style. Economy style. See light chart F for subcomponents. 6-volt Duolamp Tail Light Assembly (License Lamp Window), Glass Lens & Bulb fits: 9N, 2N, 8N (1939-52) Replaces: 8N13404 USA made NOTE: Powder coat 8N grey. Restoration quality. For 12-v bulb order ABC345. See light chart F for subcomponents. 6-volt Duolamp Tail Light Assembly (License Lamp Window), Plastic Lens & Bulb fits: NAA, Jubilee (1953-54) Replaces: FAA13402A USA made NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. See light chart G for subcomponents. 6-volt Duolamp Tail Light Assembly, Plastic Lens & Bulb fits: 600, 700, 800, 900 series (1954-57), Replaces: NCA13402A NOTE: Powder coat. Restoration quality. For 12-v bulb order ABC345. See light chart G for subcomponents. ABC1439 $3.45 ABC546 $27.00 12-volt Round Tail Light Assembly w/ License Lamp Window, red lens & black ABS base Serviceable for Ford models (4" dia.; 2 stud mount, 1-7/8" c.c. studs) 6-volt Bulb only (Double contact) (For ABC544, ABC548) 12-volt Fender & Cab Warning Light w/ 1 amber lens, 1 red lens, amber side marker, single contact bulb & black ABS base Serviceable for Ford models (All using rectangular warning lights) ABC1243 $4.95 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Amber Lens only (For ABC546) Tail, work lights, parts continue on next page 173 Electrical parts FDS173 Description / Application Description / Application Ford Order # FDS442 Tail, work lights, parts cont... Order # FDS320 FDS1105 $49.95 $125.95 Electrical parts FDS1101 $49.95 $49.95 6-volt Work Light Assembly w/ Frosted Glass Lens & On / Off Switch Fits: 9N, 2N, 8N (1947-51) Replaces: 8N15500E (4-1/2" O.D.) NOTE: Restoration quality. 6-volt Sealed Beam Bulb w/ Frosted Glass & Rings Fits: Same as FDS320 Replaces: 8N15514 USA made Order # Price FDS325 (6-volt) $89.95 FDS327 (12-volt) $89.95 MFS118 6-volt Work Light Assembly w/ Dimpled Glass Lens & On / Off Switch Fits: 8N, NAA, Jubilee, 600, 700, 800, 900 (1951-57), Replaces: 8N15500L (4-1/2" O.D.) NOTE: Restoration quality. 6-volt Sealed Beam Bulb w/ 4-1/2" Dimpled Glass fits: Same as FDS323 Replaces: 8N15514 USA made Description / Application Work Light Assembly w/ Sealed Beam Lens & On / Off Switch Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64), Replaces: 8N15500 (5-1/4" O.D. housing) NOTE: Uses 4-1/2" O.D. sealed beam bulb. For replacement bulb use ABC352 6-volt, ABC353 12volt). Restoration quality. FDS170 Order # Price FDS010 $21.50 FDS009 $17.50 FDS009B $32.95 $11.95 Light Bulb Retainer (Holder) Springs (For Work Lights) fits: Ford models NOTE: Sold in a package of 4. FDS171 NOTE: Emblems include clips / screws. $9.95 EACH Tail Light Bracket fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series Replaces: 8N13423 NOTE: Ford grey; Mounts to FDS170. 1 per bracket; Sold individually. RH & LH are the same. FDS011 12-volt Sealed Beam Bulb w/ 4-1/2" Dimpled Glass fits: Same as FDS323 Replaces: FDF-15514 USA made Light subcomponents Need just a lens, bulb or gasket? This is the place for you. For application information see the light assemblies on the previous pages or go to www.SteinerTractor.com FDS012 FDS458 FDS458GK FDS454GK ABC1439 FDS456 ABC344 ABC345 $14.95 Glass Tail Light Lens USA made FDS454GK $9.95 Tail Light Lens Gasket Set USA made FDS456 $14.95 Stainless Steel Ring (Bezel) FDS458 $13.25 Tail Light License Light Window Glass Lens USA made FDS458GK $4.95 Gasket only (For FDS458) USA made ABC1439 $3.45 6-volt Bulb only (Double contact) (For FDS172 & FDS173) ABC344 $1.80 6-volt Bulb (Single contact) (For FDS444 & factory lights) ABC345 $1.95 12-volt Bulb (Single contact) Light chart G The light components below fit FDS446, FDS448, FDS442: FDS452 174 ABC344 ABC345 FDS452 $14.95 Plastic Tail Light Lens ABC344 $1.80 6-volt Bulb (Single contact) ABC345 $1.95 12-volt Bulb (Single contact) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hood Emblem fits: 8N Replaces: 8N16600B (4-5/8" W x 2" H) NOTE: Die cast, chrome w/ red background. Beautiful! Hood Emblem fits: NAA (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a baked-on painted finish in original colors! FDS013 $48.50 FDS014 $48.50 FDS312 $48.50 FDS235 FDS307 $76.00 FDS2475 $88.75 FDS2477 $6.50 FDS409 $35.75 $74.95 Hood Emblem fits: 600, 620, 630, 640, 650, 660 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a baked-on painted finish in original colors! FDS1894 Hood Emblem fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62), Replaces: 311232 (Measures 5-7/8" across) USA made NOTE: Metal backed. Hood Emblem fits the following w/ cast iron front nose: 1801, 1811, 1821, 1841, 1871, 1881, 2030, 4030, 4040, 4130, 4140 4-cyl. industrial (1958 - 62) Replaces: C0NN16600E, C0NN16600F, 312718 (5-7/8" O.D.) USA made NOTE: Metal backed. Does not include FDS2477 bracket. Hood Emblem Bracket fits the following w/ cast iron front nose: 1801, 1811, 1821, 1841, 1871, 1881, 4040, 4140 4-cyl. (1958 64), Replaces: 312741 (6" o/a length, 1-1/4" wide) $66.95 Front Grille Emblem fits: 6000; Serviceable for 6000 Commander, Replaces: CONN16600A; Serviceable for C5NN3A515A (10 x 32 thread, 2.475" tall, 3.675" length of widest point) USA made ABC374 $0.25 Hood Emblem fits: 800, 820, 840, 850, 860 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a baked-on painted finish in original colors. Hood Emblem fits: 900, 950, 960 (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a baked-on painted finish in original colors! Hood Emblem fits: 501, 541, 601, 611, 621, 631, 641, 651, 661, 671, 681, 701, 741, 771 (1958-62), Replaces: 311231 (5-1/2" across) USA made NOTE: Metal backed. Description / Application Hood Emblem fits: Fordson Major; Dexta up to SN: 916550 when using oval emblem Replaces: E1ADKN8212C NOTE: Metal. $48.50 The light subcomponents below fit FDS172, FDS173, FDS444: FDS454 Price Hood Emblem (Economy) fits: 8N, Replaces: 8N16600B (4-5/8" W x 2" H) NOTE: Painted, pot metal. Hood Emblem fits: Jubilee, Golden Jubilee (Measures 5-3/4" across) NOTE: Die cast, chrome plated w/ a baked-on painted finish in original colors! Light chart F FDS454 2-Piece Hood Emblem (Economy) Fits: 9N, 2N, Replaces: 9N16600 (Oval piece: 3-1/4" W x 1-7/8" H Rectangle piece: 2-1/2" W x 1" H) NOTE: Painted, pot metal. Order # $48.50 $47.25 Fender Light Brackets, Pair Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N13470, 9N13471 NOTE: Ford grey. Sold as pair. Description / Application Emblems - Licensed by Ford cont... IHS543 IHS401 Description Emblem Push Clip (For Ford emblems) (Center hole dia. = 0.180" & will expand to 0.300") NOTE: Push Clips are included w/ the listed emblems. Starter hand cranks USA made Serviceable for 9N, 2N, 8N (may interfere with some bumpers) Replaces: 9N17040, 2N17040A (13-1/4" to first bend, 5/8" dia.) Order # Price Starter Hand Crank w/ Pin...................................IHS543............. $45.00 & w/ Spinner Starter Hand Crank w/ Pin...................................IHS401............. $29.50 & w/out Spinner STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 175 Chassis parts FDS1109 Description / Application Emblems - Licensed by Ford Ford Ford FDS323 Price $125.95 Tail, work lights, parts cont... Front bumper, part Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000, 3000, (4000 SU w/ I-Beam Axle) Replaces: 33806S34, 351505S8, 354369S8 (5/8" x 18" x 4", Grade 8) FDS031 FDS478 Description Order # Bumper Bolt Kit...................................................FDS478.............$13.75 NOTE: 5/8" x 18" x 4", Grade 8. Zinc plated. $67.50 Economy Front Grille fits: 9N, 2N, 8N Replaces: 8N8204 NOTE: Not like original. For best results fit to tractor before painting. FDS205 FDS204 FDS198 $350.00 $350.00 FDS091H $7.75 Grille Mounting Stud fits: NAA, Jubilee (1953-54), Replaces: NAA88219A (1/4" - 20) NOTE: 2 used per tractor; Sold individually. FDS347 FDS356 Description / Application FDS352 Front Grille fits: Late 9N, 2N (Late 194147), Replaces: 9N8206D (Tear drop shaped bars) USA made NOTE: Restoration quality. Made from original tooling Front Grille fits: 8N (1947-52) Replaces: 8N8204 (Tear drop shaped bars) USA made NOTE: Exact reproduction. Powder coat finish correct 8N Ford gray paint $100.75 $6.95 $334.45 FDS1090 176 $248.50 $235.50 Order # Price FDS359 $32.50 FDS360 $6.10 Push-In Stud & Knob (For FDS359 Bottom Grille) fits: 2000, 3000, 4000, 5000, 7000 (All April 1968 & up) Replaces: C9NN8B151B, 9828014 NOTE: 2 used per bottom grille; Sold individually. FDS059 $59.95 1-Piece Front Grille Screen Assembly w/ Plastic Outer Frame & Steel Screen Fits: 2600, 3600, 4100, 4600, 4600SU, 5600, 6600, 7600; Will also fit 2000, 3000, 4000 if using 1-piece style grille housing Replaces: D5NN8200A (18-3/8" top width, 17-1/2" bottom width, 23-3/4" tall) Upper Grille Assembly fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 4030, 4031 (1958-62) Replaces: 310984 (outer shell), 310982 (inner screen), 311591 (grille mounting stud) FDS311 Outer Shell only fits: Same as FDS356 Replaces: 310984 FDS354 $3.75 EACH FDS348 FDS357 Front Grille fits: Jubilee, NAA, 600, 800, Early 2000 series (1953-62) Replaces: NCA8200A NOTE: Steel; primed gray. Hand crank hole is elongated. Order # Bottom Grille Section w/out Headlight Holes Fits: Same as FDS358 Replaces: D1NN8151A NOTE: Grey / blue plastic. Front Grille Screen Fastening Spring To secure bug screen to Ford grilles NOTE: 4 required; Sold individually. Price $7.75 $168.50 Grille Mounting Stud fits: 801, 901, 2000 4-cyl., 4000 4-cyl. series (1958-62) Replaces: 311591, D4NN8N213A (5/16" - 18 UNC) NOTE: 4 used per grille; Sold individually. Bottom Grille Section fits: 801, 811, 821, 841, 851, 861, 871, 881, 4000, 4030, 4031 4-cyl. (1958-62), Replaces: 310032 USA made NOTE: Metal; E-coated black. Fits: NAA, Jubilee, 501, 600, 700, 800, 900 (1953-62), Replaces: NCA16613A Description Order # Nosecone (Hood Front Top)...............................FDS127........ $103.15 NOTE: Not restoration quality. For best results fit to tractor before painting. $2.95 Upper Side Panel (Hood Dog Leg) Bolt Kit fits: 2N, 8N, 9N, Replaces: 20311S7 (bolt), 34806S (lock), 33798S (nut) NOTE: Includes 4 fine thread bolts, nuts, lock washers. ABC2257 $5.99 Hood Side Panel (Hood Dog Leg) to Axle Support Bolt Kit fits: 2N, 8N, 9N (All using single bolt dog legs) Replaces: 350782S8 (7/16" - 20 NF bolts) NOTE: Includes 2 bolts, flat & lock washers, square nuts. FDS382 $7.20 4-Piece Hood Bolt Kit fits: 8N Replaces: 355494S (3/8" x 24) USA made NOTE: Secures hood to dash using (4) bolts. Can also be used to bolt air cleaner to battery tray using (2) bolts. FDS385 $7.20 6-Piece Hood Dash Screw Kit fits: NAA, Jubilee, Golden Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. (1953-64) Replaces: 354425S (5/16" x 24 Phillips head) USA made NOTE: Secures rear of hood to dash panel using (6) screws. FDS344 $59.95 Hood Ornament fits: 2000, 2030, 2031, 2110, 2111, 2130, 2131, 4000, 4030, 4031, 4040, 4110, 4120, 4121, 4130, 4131, 4140 (All 4-cyl.) (1962-64) Replaces: C3NN16B748A NOTE: Metal; chrome plated. FDS125 (RH) $110.75 FDS130 (LH) $110.75 Order # FDS069 Price $342.50 Top Grille Section w/ Red "Ford" Letters Fits: 2000, 3000, 4000, 5000, 7000 (All April 1968 & up) Replaces: C9NN8A163AG NOTE: Grey plastic. Replaces the metal grille used April 1968 thru January 1971 & the plastic grille used February 1971 & up. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS083 (RH) $79.95 FDS084 (LH) $79.95 Front Side Panel Dog Fits: NAA, Jubilee, 600, 800, Early 2000 4-cyl. series (1953-62) FDS125 Replaces: NCA16652A FDS130 Replaces: NCA16653A FDS125 FDS130 Hood, parts $131.95 $27.50 Price Description / Application ABC2277 Nosecone 2-Piece Front Grille (Upper & Lower) Fits: 2000, 3000, 4000, 5000 (All 1965 to March 1968), Replaces: C5NN8A163A, C5NN8202AA NOTE: Metal FDS358 Description / Application $193.95 Inner Screen only fits: Same as FDS356 Replaces: 310982 FDS190 Front Grille w/ Rubber Bumpers & Hardware fits: Jubilee, NAA, 600, 800, Early 2000 series (1953-62) Replaces: NCA8200A USA made NOTE: Restoration quality. Steel; e-coated black. Hand crank hole is round. Close out! Grille Mounting Stud fits: 600, 700, 800, 900 (1954-62), Replaces: NAA88219B (5/16" - 18) NOTE: 2 used per tractor; Sold individually. $164.50 Front Grille fits: 8N (1947-52) NOTE: Original style. Bare steel. Round bars. FDS091 Description / Application 4-Piece Grille Bumper Kit fits: Jubilee, NAA, 501, 600, 700, 800, 900, Early 2000 series (1953-62), Replaces: NAA88227B USA made Hood, parts cont... Description / Application Hood w/ Battery Door & Hinge, Latch Kit, Knob (w/out Dog Legs) Fits: 8N, Replaces: 8N16612, 9N16938C NOTE: Not restoration quality. Does not have Ford script. Will fit Ford 9N & 2N but models did not originally have side air cleaner openings. For best results fit to tractor before painting Side Panel (Dog Leg) Fits: 2N, 8N FDS083 Replaces: 8N16618A FDS084 Replaces: 8N16619A FDS1759 $5.95 FDS144 $38.95 Radiator to Hood Side Panel Bumper Fits: NAA thru 4000 4-cyl. (1953-64) Replaces: NAA88131B (2.026" o/a length, 1.035" thick, 1.285" wide) USA made NOTE: 2 used per tractor; Sold individually. Must be glued to panels. Battery Door w/ Latch & Hinge Assembly fits: 9N w/ steel hood, 2N, 8N Replaces: 9N16938C FDS380 FDS083 FDS084 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $8.80 Set of (4) Rubber Bumpers fits: 9N w/ steel hood, 2N, 8N, Replaces: 11A-16758A Hood, parts continue on next page 177 Chassis parts Chassis parts FDS006 Price $4.00 Front grilles, parts cont... Ford Ford Front grilles, parts Price Order # FDS345 Price Front Bumper (4 Bar)...........................................FDS031.............$114.95 NOTE: IMPROVED W/ CORRECT FIT! Heavy duty, red oxide primer. USA made Order # Front grilles, parts cont... Hood, parts cont... Order # Price FDS279 $24.30 FDS008 FDS007 FDS085 $15.00 $9.95 Description / Application Order # FDS382 Battery Door Hinge fits: 9N w/ steel hood, 2N, 8N, Replaces: 9N16689 USA made Chrome Battery Door Handle w/ Stud, Nut & Latch fits: 9N, 2N, 8N Replaces: 9N16625 Air Cleaner Grille Door w/ Thumb Screw fits: 8N, Replaces: 8N9661 NOTE: Fits outside right rear hood. Will also fit Ford 9N & 2N if they are converted to an 8N hood. Price $7.20 Air Cleaner Cap fits: 9N, 2N w/ vertical air intake thru hood (4-1/4" body dia.; 1-3/4" I.D.) NOTE: Fits outside of pipe $13.10 FDS186 Center Door Rubber Bumper Fits: NAA, Jubilee, 600, 700, 800, 900, 2000 4 cyl, 4000 4 cyl; Fits: LPG: 501, 601, 701, 901 (1953-1964), Replaces: 354177S NOTE: 4 to 6 required per tractor; Sold individually. FDS191 FDS034 Ford FDS491 $1.05 Hood / Grille Rubber Bumper Fits: 2000 & up, 1965 & up Replaces: C5NN16N655A (.990" o/a length, .500" head dia.) NOTE: 20 required per tractor; Sold individually. FDS440 $14.85 Hood Latch Spring fits: NAA, Jubilee, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (1953-64) except LP Replaces: NAA16925B NOTE: 2 required per tractor; Sold individually. $24.75 $4.95 $6.50 FDS033 $14.95 FDS210 178 $129.95 $12.15 FDS019 $18.95 Air Cleaner Spring Clip fits: 8N, NAA, Jubilee, 600, 700, 800, 900 (thru 57) Replaces: 9N9678 Air Cleaner Gasket fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900 (thru 62) Replaces: 9N9623B USA made Air Cleaner Oil Cup (Clamp-Held) Fits: Some 9N, 2N, 501, 600, 700, 800, 900 Replaces: 311507 (4-3/4" O.D. at lip, 4-15/32" I.D., 3" high) NOTE: Check measurement before ordering. FDS309 $29.95 FDS1481 $29.95 FDS1540 FDS260 FDS261 FDS258 $10.75 $32.50 $4.00 EACH $5.10 EACH $27.50 Air Cleaner Oil Cup fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62 w/ 172 C.I. gas) Replaces: 311510 (5-3/8" I.D.) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price ABC2443 Air Cleaner Tube fits: 700, 701, 740, 741, 771, 800, 820, 840, 850, 860, 900, 950, 960 gas (1955 & up), Replaces: EAF9621B, 311112 (1-5/8" O.D. pipe) Air Cleaner Tube fits following w/ 172 C.I. gas, LP: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881, (4000 4-cyl.), 4030, 4040, 4121, 4130, 4131, 4140 (1958 & up), Replaces: 311092, 86531351 (2" O.D.) Air Cleaner Hose fits: 9N, 2N, 8N, F40, NAA, Jubilee, 501, 541, 600, 601, 611, 621, 631, 641, 651, 661, 671, 681, 700, 741, 771 & some 800, 900 series gas (1939-57) Replaces: 9N9652 (1-1/2" I.D., 2-7/16" long) NOTE: 2 required per tractor; Sold individually. Air Cleaner Hose fits: 801, 901 (1957-64); 1801, 2000, 4000 4-cyl. series gas Replaces: 311107 (2" I.D., 2-1/4" long) NOTE: 2 required per tractor; Sold individually. Clamp (Air cleaner to carb pipe) (For 1-3/4" to 2" O.D. Air Cleaner Hose) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, some 800, 900 series (1939-57) Replaces: 9N9653 NOTE: 4 required per tractor; Sold individually. $22.50 Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) fits: 2000, 3000, 4000 gas, diesel; 2600 thru 4610 gas only (1965 & up), Replaces: C5NE9C673A, 270228 (1" I.D.) Description / Application Clamp-Held cont... ABC1765 $14.50 Dust Unloader Valve (Vacuator Valve) (For Dry Air Cleaners) fits: 2310 thru TW20 and Industrials using 3" unloader valve, Replaces: D2NN9C673B, F0NN9C673AA, 81870839 Pre-cleaner caps, parts Order # Price Description / Application FDS361 $19.95 Pre-Cleaner Cap fits: 801 thru 981 gas (1958-62) & the following gas w/ dry type air cleaner (1965 & up): Some 2000, 3000, 4000 series, 2600, 3600, 4600, 231, 335, 515, 531, 532; Fits the following diesels w/ oil bath application: Some 2000, 3000, 4000 series, 231, 233 w/ 2" Intake Replaces: C5NN9A660B (6-1/2" o/a height) NOTE: Metal; powder coat black. Check intake pipe size before ordering. FDS362 $19.95 Pre-Cleaner Cap fits: Some 445, 4000, 4400, 4500, 4600, 5000, 5100, 5200, 5600, 6600, 7000, 7100, 7200, 7600 w/ 2-1/4" Intake, Replaces: C5NN9A660A (6-3/4" o/a height) NOTE: Metal; powder coat black. ABC1824 $59.95 ABC383 $77.75 Air Cleaner Tube fits: NAA, NAB, Jubilee, 501, 541, 600, 601, 611, 620, 621, 630, 631, 640, 641, 650, 651, 661, 671, 681 gas, LP (1953 & up), Replaces: EAE9620B (1-5/8" O.D.) $3.60 EACH Air Cleaner Cup Clamp fits: 9N, 2N, 501, 600, 700, 800, 900, Replaces: 311508 JDS540 Air Cleaner Oil Cup Clamp fits: 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981 (1958-62 w/ 172 C.I. gas) Replaces: 311511 Air Cleaner Tube fits: 9N, 2N, 8N Replaces: 9N18215C (1-11/16" O.D.) NOTE: Chrome plated. Air Cleaner Inner Oil Cup fits: Some 9N, 2N, 501, 600, 700, 800, 900 Replaces: 311506 Description / Application Air Cleaner Assembly w/ Clip Assy., Gasket & Clip-Held Cap fits: NAA, Jubilee, 600 (1953-57) Replaces: EAE9600D & 312917 (7-1/4" c.c. bolt pattern) JDS541 $9.95 Air cleaner assembly, parts Price Air Cleaner Oil Cup (Clip-Held) Fits: Some 8N, NAA, Jubilee, 600, 700, 800, 900 (thru 57), Replaces: 8N9658 (5" O.D. at lip, 3-1/8" high) NOTE: Check measurement before ordering. Order # Clamp-Held cont... Clamp-Held FDS081 Order # Air Cleaner Oil Bath Filter Element Fits: Ford models (3" wide x 78" long) NOTE: Replaces: the mesh in existing air cleaners. Sold by the bag (Normal utility air cleaners will use 2 bags). Description / Application Air cleaner assembly, parts cont... Pre-Cleaner Cap Assembly fits: Some 801 thru 1881 series, 2000 thru 6000 series w/ 2" I.D. base & 5-1/2" bowl dia. Replaces: B9NN9A660A, 86555327 USA made Pre-Cleaner Cap Assembly Fits: Ford models w/ 2-1/4" I.D. base & 7" bowl, Replaces: 86620243 USA made ABC512 $74.95 Pre-Cleaner Cap Assembly Fits: Ford models w/ 2-1/2" I.D. base & 7" bowl USA made ABC470 $39.95 Pre-Cleaner Cap Assembly Fits: Ford models w/ 3" I.D. base & 7" bowl (3" I.D. base) ABC510 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $64.60 Pre-Cleaner Cap Assembly Fits: Ford models w/ 4" I.D. base & 10-1/2" bowl Pre-cleaner caps, parts continue on next page 179 Chassis parts Air Cleaner Grille Door w/ Screen & Thumb Screw fits: NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1953-64), Replaces: NAA9661B (door), NAA9669A (screen) $4.95 $2.75 Price Clip-Held FDS185 Screen only (For FDS075) FDS377 4-Piece Bolt Kit fits: 8N Replaces: 355494S (3/8" x 24) USA made NOTE: Bolts air cleaner to battery tray (only 2 bolts are required). Order # $29.95 $14.50 $22.95 Description / Application Air cleaner assembly, parts cont... Ford FDS075S IHS390 ABC422 Air Cleaner Funnel Assembly Fits: 8N, Replaces: 8N9684 FDS075 Chassis parts Air cleaner assembly, parts cont... Pre-cleaner caps, parts cont... Fuel tanks, parts cont... Order # Price Description / Application ABC554 $42.95 Pre-Cleaner Cover w/ Brass Knurled Nut Fits: Some 501, 601, 701, 801, 901, 1801, 2000, 3000, 4000 series gas, diesel, 4400, 5000 gas (All w/ 5-1/2" bowl) Replaces: B9NN9A660A, B9NN9A664A, 73223 (5-7/16" I.D.) USA made NOTE: Aluminum ABC484 $24.95 Pre-Cleaner Bowl (5-1/2" dia.) fits: 501, 601, 701, 801, 901, 1801, 2000, 3000, 3400, 4000, 4400 gas, diesel, 5000 gas Replaces: B9NN9A663A NOTE: Clear plastic. Order # Price Description / Application ABC127 $35.75 Fuel Shut Off Valve w/ O-Ring at Fuel Tank fits: 501, 600, 601, 700, 701, 2000 4-cyl. gas, diesel (1954-64); 800, 801, 900, 901 up to SN: 126524 w/ 1/4" fuel line gas, diesel (1954-60); 1801, 4000 Both 4-cyl. diesel (1958-64), Replaces: 311292 NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. FDS483 $14.85 ABC338 $24.95 $13.95 Pre-Cleaner Cover w/ Brass Nut (For 7" bowl) fits: Some 2610 - 6810 Replaces: 73534 (7" dia.) NOTE: Metal. ABC1315 $8.50 Pre-Cleaner Bowl (7" dia.) For 2" to 3" inlet fits: Some 2610 thru 6810 Replaces: C0NN9A663A, 80073533, 73533, Donaldson PO20227 NOTE: Clear plastic. ABC338 dimensions: Bowl O.D. at top - 7"; Cone I.D. at top 3-1/2"; Bowl side height - 3"; Overall height - 4-1/8" ABC339 $17.25 Pre-Cleaner Bowl (10-1/2" dia.) For 3" to 4" inlet fits: Some 2600 thru TW20, Replaces: C9NN9A663A, 594075 NOTE: Clear plastic. ABC339 dimensions: Bowl O.D. at top - 10-1/2"; Cone I.D. at top 5-9/16"; Bowl side height - 3"; Overall height - 4" Fuel tanks, parts Order # FDS176 Price Description / Application $175.00 Fuel caps, parts Order # Price FDS167 $9.95 BACK IN STOCK! ABC003 (Chrome) $9.95 Underside view 180 $199.99 Fuel Tank (Steel) fits the following gas only models: NAA, Jubilee, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. series (1953-64), Replaces: NAA9002E, NCB9002A NOTE: Includes provision for fuel sending units. Depending on application tank may be smaller capacity than original. If fuel sender is needed please order FDS200. MHS043 (Zinc) $9.95 MHS043GK $1.50 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS3280 FDS1785 FDS2616 FDS2620 FDS1780 FDS3363 Sediment Bowl Assys: ABC123 ABC039 ABC319 ABC563 ABC038 components The following parts (Sold separately) will fit ABC038 Sediment Bowl Assy: Order # Price Description ABC123 $2.90 Glass Bowl, Replaces: 9N9162 (2" O.D., 1.280" L) NOTE: Also fits 600, 700, 800, 900 thru 1957. ABC039 $1.50 Gasket, Replaces: NAA9160A (2" O.D.) USA made NOTE: Also fits 600, 700, 800, 900 thru 1957. ABC319 $6.20 Screen (Square Hole) (Pack of 5) ABC563 $4.95 Bail Assembly w/ Nut, Replaces: 2N9166 USA made NOTE: Also fits 600, 700, 800, 900 thru 1957. Order # Price Description / Application ABC040 $29.95 Sediment Bowl Assembly w/ 3/8" Bolt Hole fits: 501, 600, 601, 700, 701, 2000 4-cyl., 800, 801, 900, 901, 1801 up to SN: 126524 (ALL w/ gas engine to SN: 126524) Replaces: NCA9155D (1/4" Fuel line thread) NOTE: Use caution when threading in the fuel line. Filter is not returnable if threads have been cross threaded. 3/8" $29.95 7/16" FDS3363 Gasket only (For MHS043) (2.622" O.D., 1.500" I.D., 0.100" thick) USA made NOTE: Rubberized cork gasket. ABC346 The following parts (Sold separately) will fit ABC040, ABC106, Fuel Cap (Vented) w/ MHS043GK Gasket fits: 9N thru TW35 (1939-90 Except 2600, 2610) Replaces: C5NN9030B, E7NN9030AA (2-7/8" O.D.) Underside view ABC294 ABC040 / ABC106 / FDS3363 components Description / Application Fuel Cap (Non-Vented) w/ Gasket Fits: 9N, 2N, 8N, Replaces: 9N9030 NOTE: Original appearance. Description / Application Sediment Bowl Assembly fits: 9N, 2N, 8N, NAA, Jubilee, Replaces: 2N9155B, NAA9155B (3/8" pipe inlet, 1/4" tube outlet) ABC106 Fuel Tank (Steel) fits: 9N, 2N, 8N Replaces: 9N9002 FDS178 Fuel Tank Screen fits: Most Ford models w/ stem style sediment bowl (.375" screen O.D., .216" pipe O.D., 2.530" o/a length) USA made NOTE: Slides on top of sediment bowl inlet to prevent dirt from the fuel tank bottom from entering the sediment bowl assembly. To fit ABC281, IHS713, IHS1577 customer must drill sediment bowl stem out. Price $29.95 Sediment Bowl Assembly w/ 7/16" Bolt Hole fits: 800, 801, 900, 901, 1801 (ALL w/ gas engine SN: 126525 & up) Replaces: 311272 (1/4" Fuel line thread) NOTE: Use caution when threading in the fuel line. Filter is not returnable if threads have been cross threaded. NEW! Sediment Bowl Assembly Fits: 'Some' Late 801 901, 1801, 4000 4-cyl. series gas SN: 126525 & up (up to 1964); 6000 series gas using 7/16" mounting bolt & 5/16" fuel line thread Replaces: C0NN9155A (7/16" bolt hole, 5/16" fuel line thread) NOTE: Use caution when threading in the fuel line. Filter is not returnable if threads have been cross threaded. Order # Price Description ABC294 $1.25 Gasket, Replaces: 311275 (1-9/16" O.D.) USA made NOTE: 1958 & up. ABC346 $4.65 Filter Screen & Gasket Set FDS3280 $7.95 NEW! Glass Sediment Bowl fits: 501 thru 4000 4-cyl. (1954-64), Replaces: 311276 (1.500" O.D., 1.900" length) NOTE: Measure dia. before ordering. FDS1780 $1.49 Fuel Filter Valve Stem to Carb Body Gasket (For ABC040), Replaces: NCA99180B (0.339" I.D. x 0.579" O.D. x 0.062" thick) NOTE: 2 used per tractor; Sold individually. FDS1785 $1.89 Fuel Filter Valve Stem to Carb Body Gasket (For ABC106 & FDS2620, FDS3363) Replaces: NCA99180A (0.443" I.D. x 0.600" O.D. x 0.047" thick) NOTE: 2 used per tractor; Sold individually. FDS2616 $16.50 Sediment Bowl Retaining Bolt (3/8") (For ABC040), Replaces: 86531362 USA made FDS2620 $24.50 Sediment Bowl Retaining Bolt (7/16") (For ABC106, FDS1785, FDS3363) Replaces: C0NN9A349B USA made Fuel filters Order # Price ABC490 $6.45 ABC1423 $32.15 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Description / Application In Line Fuel Filter w/ Hose & Clamps Fits: Ford models using 3/8" fuel line NOTE: Must splice fuel line to use. Will help to keep rust & dirt out of carburetor. Diesel Single Fuel Filter Assembly w/ Glass Bowl fits: 2000 3-cyl. thru 7700 Industrials: 230A thru 755A Replaces: C5NE9165C, C7NN9162B, D9NN9165BA, 83937061 ((4) 1/2" x 20 UNF ports) NOTE: Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. Fuel filters continue on next page 181 Chassis parts Chassis parts JDS559 Order # ABC038 $20.75 Ford Ford ABC484 dimensions: Bowl O.D. at top = 5-1/2"; Bowl O.D. at bottom = 5"; Cone I.D. at top=2-7/16"; bowl side height=2-7/16"; overall height=3-9/16" Fuel Shut Off Valve fits the following 1965 - 96 gas, diesel: 2000 3-cyl. thru 7810; Industrials: 3400 thru 755B Replaces: E2NN9N200A, E2NN9N024AA, E0NN9N024AA, 83935915 (1/2" pipe inlet, 5/16" tube outlet) NOTE: Metal w/ brass valve & plastic filter screen. Use caution when threading fuel line in, as it is not returnable if threads have been cross threaded. Sediment bowl assemblies, parts Fuel filters cont... Order # ABC1421 Price Throttle parts cont... Description / Application $5.50 Fuel Filter Element w/ Seals EACH (For Cav/Simms fuel filters) Fits: 2000 3-cyl. thru 9600 (All w/ 2.85" tall element), Replaces: 83937061, D8NN9N074AA, Cav # 7111/296 (3-1/2" O.D. x 3/4" I.D. x 2.85" tall) NOTE: Sold individually. Fuel lines Order # FDS487 FDS1544 FDS1549 $4.95 Rubber Bumper Anti-Rattler fits: 9N, 2N, 8N (1939-52), Replaces: 9N9121A, 9N9121 (0.985" O.D., 0.500" tall) NOTE: Rubber finish. Fits between fuel line & tank. FDS1610 $14.95 FDS332 $3.00 FDS155 $14.95 FDS265 $20.60 $29.95 $24.95 $48.95 Fuel Line Assembly fits: NAA, Jubilee (1953-54), Replaces: NCA9282C FDS156 Fuel Line fits following gas only w/ 134 C.I. engine 1954-64: 600 series, 601 series, 700, 740, 2000 (4 cyl.), 2111, 2030, 2031, 2120, 2130, 2131, Replaces: NCA9282B FDS158 $27.45 FDS451 $19.95 Fuel Line fits: Some 801, 811, 821, 841, 851, 861, 871, 881, 901, 941, 951, 961, 971, 981, 1801, 1811, 1821, 1841, 1871, 1881 w/ 172 C.I. gas engine (SN: 11977 - 126524) Replaces: 310918 (1/4" line and 15-1/2" long) Throttle parts Order # Price FDS378 $32.95 FDS2007 182 ABC496 $19.95 Throttle Rod Grommet fits: NAA, Jubilee, 501, 600, 700, 800, 900; 2000, 3000, 4000, 5000 thru 7910, Replaces: 353873S Throttle Control Linkage fits: 9N, 2N (1939-47), Replaces: 9N9810 (2-1/2") Throttle Control Linkage (Throttle shaft to governor) fits: 9N, 2N (1939-47) Replaces: 9N9815 (10-1/4") ABC2501 $20.40 ABC3149 $4.50 $14.95 Throttle Control Linkage (Throttle to governor control) fits: 8N (1947-52) Replaces: 8N9815 (23-3/8") Throttle Control Rod fits: NAA thru 4000 4-cyl. gas (1953-1964) Replaces: NAA9815F (4-1/8" o/a length) ABC1895 $6.50 Throttle Control Rod (Governor to Carburetor) fits: Jubilee - 4000 4-cyl. series gas, LP (1953-64), Replaces: EAF9818C, 86552618 NOTE: Clevis is not included. FDS1265 $58.50 Clutch kits, parts $11.95 $2.95 Throttle Bellcrank Friction Disc Spring Washer fits: NAA, 501, 600, 700, 800, 900, 2000, 4000 4-cyl. gas, LP (1953 - 64) Replaces: NAA99778B Throttle Control Linkage (Governor to carburetor control) fits: 9N, 2N, 8N (193952), Replaces: 9N9818A (7") Description / Application Order # Quadrant Throttle Plate fits: 8N Replaces: 8N9889A FDS411 Price $29.95 $18.90 Quadrant Throttle Plate fits: 9N, 2N (1939-47), Replaces: 9N9820 FDS151 Order # FDS087 Lever (For Throttle) fits: 8N Replaces: 8N9805 Description / Application Fuel Line Assembly fits: 9N, 2N, 8N (1939-52), Replaces: 9N9282A (1/4" Tube w/ 7/16-24 fitting) Description / Application FDS259 3-Piece Screw Kit (For Quadrant Throttle Plate) fits: 8N, Replaces: 28319S7 (10 - 24 x 3/8") USA made Price $146.95 Description / Application Clutch Kit fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 up to SN: 14257 (193957) (All w/ 4 speed) (9", 10 splines) NOTE: Kit includes new pressure plate, clutch disc, throwout bearing, pilot bearing & alignment tool. Does not include pilot bushing for NAA, Jubilee. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS1268 $125.00 Description / Application Clutch Disc fits: 9N, 2N, 8N, 600, 700, 800, 900 up to SN: 14257 (1939-57) Replaces: 91A7550, NAA7550A (9", 10 splines, spring loaded, 1-3/8" spline I.D.) Clutch Throw-Out Bearing fits the following w/ 4 speed single clutch: 9N, 2N, 8N, DEXTA, MAJOR, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series (thru 64); Fits the following 1965 & up w/11" single clutch: 2000 3-cyl 2110, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610 3900, 3910, & 231; Fits the following made 10/1969 - 9/1971 w/11" 3 lever pressure plate & w/out PTO: 4000 3-cyl., 4110, 4400, 4500, Replaces: 78-7580A, C0NN7580A (2.078" I.D., 0.801" thick, 3.269" face dia.) NOTE: Measure before ordering. Clutch Throw Out Bearing fits the following w/ dual clutch: 660 thru 961, Dexta & the following w/ single or dual clutch: 2000, 3000, 4000, 5000 thru TW35 Replaces: 86534551 (2.490" I.D., 4.060" O.D., 0.870" wide) NOTE: Sealed bearing, no need to grease. NEW! Clutch Pilot Bearing fits: Dexta, 2N, 8N, 9N, 541 thru 4000 4-cyl., 2000 3-cyl. thru 5000 (1939-98), Replaces: C5NN7600A, 81805417 (0.669" I.D., 1.575" O.D., 0.472" wide) NOTE: See website for full applications. Clutch Release Bearing Spring fits the following w/ 3 or 4 speed transmission: 9N, 2N, 8N, NAA, Golden Jubilee, 501, 600, 700, 800, 900, (2000 4-cyl series), (4000 4-cyl series) (1939-64), Replaces: 9N7562 NOTE: 2 used per tractor; Sold individually. Throw Out Bearing Carrier fits the following w/ double clutch & 5 speed transmission SN: 14256 & up: 660, 661, 860, 861, 960, 961, 2000, 4000 4-cyl. series (1955-64) (All w/ live PTO) Replaces: 311260, 86539876 (2.110" I.D.) Order # Price Description / Application FDS1133 $479.85 Dual Clutch Kit fits: Dexta, Super Dexta, FDS493 $99.95 Clutch Torque Limiter Disc fits: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121, 6000 (1961 & up) (All w/ Select-o-Speed transmission - 1959-64), Replaces: 313875, 313966, C0NN7A539B, C3NN7A539A, E8NN7A539A (7-1/4" O.D., 20 spline, 1.080" spline I.D.) ABC412 $6.50 Clutch Alignment Tool fits: 9N, 2N, 8N, NAA, Jubilee, 541, Some 600, 700, 800, 900 (1939-57) (1-3/8" dia. spline, 10 splines, .675" pilot dia.) NOTE: Check clutch spline dia. before ordering. FDS1229 $48.95 Select-o-Speed Control Selector Lever Fits the following w/ Select-o-Speed transmission: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121 (1959 & up) Replaces: C0NN7202B FDS1232 $48.95 Select-o-Speed Control Selector Cover Fits the following w/ Select-o-Speed transmission: 611, 671, 681, 771, 811, 871, 881, 971, 981, 1811, 1871, 1881, 2000 4-cyl., 2111, 4000 4-cyl., 4121 (1959 & up) Replaces: C5NN7N013A, 313936 NOTE: Fits left or right side. FDS328 $8.95 Transmission Drain Plug w/ Gasket Fits: 9N, 2N, 8N, NAA, Jubilee (Also Fits as an Oil Fill Plug on NAA - 4000 4-cyl., 4 speed, 1939-64), Replaces: 9N7010 (2-1/2" O.D., 2"-12 UN thread) ABC291 $1.00 660, 661, 860, 861, 960, 961, 2000 4-cyl., 4000 4-cyl series (All w/ 5 speed transmission live PTO) (1955-64), Replaces: 311435 (9" dia. dual clutch, 1-7/8" x 29 PTO spline & 1" x 15 transmission spline) NOTE: Kit includes new dual clutch assembly (no core needed), pilot bearing & throw out bearing. Pump Base Drain Plug / Transmission Filler Plug Gasket (For FDS328) Replaces: 8N7011 USA made FDS418 Input Shaft Retainer fits the following w/ double clutch & 5 speed transmission SN: 14256 & up: 660, 661, 860, 861, 960, 961, 2000, 4000 4-cyl series thru 1964 (All w/ live PTO), Replaces: 311261 (2.105" tube O.D., 5.120" o/a length) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $12.50 Transmission & Rear End Oil Filler Plug Fits: Some Dexta, Super Dexta, Fordson Power Major, Fordson Super Major; All 2000 3-cyl., 2600, 3000, 3400, 3500, 3600, 4000 3-cyl., 4000SU, 4400, 4500 4600, 4600SU (1965-81), Replaces: 957E7010 (1-5/8" x 12 thread) NOTE: Check thread dia. before ordering. Use ABC039 gasket sold separately. Clutch kits, parts continue on next page 183 Chassis parts Chassis parts FDS1603 $18.95 Price $46.45 Clutch kits, parts cont... Ford Ford FDS485 Price Order # FDS413 Clutch kits, parts cont... Clutch kits, parts cont... Order # ABC387 FDS3357 Order # FDS1892 Price $9.95 $135.00 NEW! Transmission Seal, Bearing & Gasket Kit fits: 2N, 8N, 9N Replaces: (2) - 9N7086, (1) - 8N7052A, (1) - 9N7120, (4) - 9N7066, (4) - 9N7067, (1) 9N4662, (1) - 9N7223, (1) - 8N7223 NOTE: Also fits NAA & Jubilee except for the transmission to rear end gasket. $64.95 Sherman Transmission Shift Cable w/ Knob fits: 9N, 2N, 8N using Sherman cable shifted transmission, step up / step down, Replaces: 10B195 (3/8" - 24 NF inner ends & 1/2" - 20 NF outer end thread; 31-1/2" o/a length) ABC288 $3.30 $3.95 Gear Shift Pin fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series w/ 3 & 4 speed transmission Replaces: 9N7221B DEC451 $9.20 Transmission Shift Pattern Decal Fits: 2000, 3000, 4000 series (1965 & up); Industrials: 230A - 540A w/ 8 speed transmission & Live PTO Replaces: C5NN7B292, D3NN7B292B (3-15/16" x 5-1/4") USA made FDS032 $112.50 Application Fits: 9N, 2N w/ 3 speed transmission Replaces: 9N7111 FDS3304 FDS016 FDS017 $134.00 $172.50 $168.50 FDS1451 $69.60 NEW! Fits: 8N w/ 4 speed transmission Replaces: 8N7111 (11.887" o/a length) FDS1447 Fits: NAA, Jubilee Replaces: NAA7111C (12-1/2" total length) Transmission Shifter Plate fits: Dexta, Super Dexta, Replaces: 957E7222 Fits: 501, 600, 700, 800, 900, 1801, 2000, 3000, 4000, 4500 series (All w/ 4 speed transmission), Replaces: NDA7111C (13" total length) FDS2479 FDS410 184 Price $75.95 $112.50 Description / Application Gear Shift Lever w/ Knob Fits: 8N, NAA, Jubilee, 501, 600, 700, 701, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 (All w/ 4 speed transmission), Replaces: C5NN7202B (5/16" UNF) FDS2479GK Price $5.25 Transmission Shift Cover Assembly Fits the following w/ internal safety switch & 6, 7, 8 speed transmission: 2000, 3000, 4000, 5000 series (10/1966 74), Replaces: 81814737 (Main lever is 13-1/4" tall from cover up) NOTE: Stamped steel. Includes brass fill plug, (2) shift levers, knobs, boots. Has provision for dipstick, dipstick not included. See website for complete applications listing. Transmission Shift Cover Gasket (For FDS2479), Replaces: 82004680 NOTE: See website for full applications listing. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Description / Application $4.50 Gear Shift Lever Knob fits: All Ford models w/ 4 & 5 speed transmission models (w/ original shift lever) Replaces: BB7213A (3/8"-24 NF) ABC221 $4.60 Gear Shift Lever Knob (Ball-Type) Fits: Dexta, 2000, 3000, 4000, 5000 & 7000 (1965 - 74); 231, 233, 335, 420, 515, 532, 535, 2600, 3600, 4100, 4600, 5600 & 7600 (1975 - 81); 2610, 2810, 2910, 3610, 3910, 4110, 4610, 5610, 5900, 6610 & 7610 (1981 - 91) 3230, 3430, 3930, 4130, 4630 (March 1990 & up), Replaces: C5NN7213A (3/8"-24 NF) USA made FDS088 $3.50 Price Description / Application FDS111 Order # $44.95 Steering Wheel fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, (Serviceable for 1801), 2000, 4000 4-cyl. series (thru 64) Replaces: 8N3600 (17-5/8" dia., 3/4" shaft, 36 splined hub) FDS189 $5.95 Chrome Nut (For FDS111) Replaces: 351114-S (11/16" UNF x 20) FDS1594 $4.25 Dome Nut Washer w/ Beveled Edge (For FDS111), Replaces: 356515S36, 356515S (0.691" I.D. x 1.500" O.D., x 0.970" thick) NOTE: Clear zinc plating. FDS363 $59.95 Steering Wheel w/ Cap fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3600, 3610, 3910, 4000, 4000SU, 4400, 4500, 4600, 4610, 4600SU, 5000, 5100, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610, (1965 & up); Industrials: 231, 335, 340, 445, 531, 540, 3400, 3500, 4400, 4500 Replaces: D6NN3600B, 82016841 (17-5/8" dia., 3/4" shaft, 36 splined hub) FDS2851 $4.85 Steering Wheel Cap fits: Same as FDS363; Also fits 5610S, 8000, 9000 Replaces: C7NN3655B, 82002600 (2.128" O.D. where cap slips in steering wheel; 1.025" tall; 2.380" O.D. above steering wheel) FDS426 $4.95 Steering Wheel Nut (For FDS363) Fits: Same as FDS363; Also fits 1801, 4040, 4140, 6000 series, Replaces: C5NN3N602A, D5NN3N602A (11/16" x 20 NF) FDS1894 $66.95 Steering Wheel Emblem fits: 6000; Serviceable for 6000 Commander Replaces: CONN16600A; Serviceable for C5NN3A515A (10 x 32 thread, 2.475" tall, 3.675" length of widest point) USA made FDS195 $46.95 FDS215 $54.95 MIS103 $12.50 Gear Shift Boot fits: All Ford models (1939 to date) w/ 3 & 4 speed transmission, Replaces: C5NN7277C, 8N7277, C0NN7277 Steering wheels, parts Steering Wheels just like original • All new material • Steel spokes Order # FDS143 Price $74.50 ABC502 $2.50 FDS308 $59.95 $63.95 Gear shift lever, parts Order # Transmission Main Shift Lever (For 1, 2 & 3rd Speed Gears) Fits: Dexta, Super Dexta Replaces: 81717916, 957E7210C (11.89" long, 5/16" - 24 N.F. thread pitch) Order # ABC085 Steering wheels, parts cont... FDS112 FDS197 ABC1591 $44.95 $7.25 $5.95 Description / Application Steering Wheel fits: 9N (1939-40); Ford 1-1/2 ton trucks (1941, 1942, 1946) Replaces: 9N3600B (18" dia., keyed hub, 3/4" shaft, 4 COVERED TO CENTER spokes) Steering Wheel Nut (For FDS143) (5/8"-18 NF x .381" tall) Steering Wheel fits: 9N, 2N (1939-47) (17-5/8" dia., keyed tapered hub, 11/16" - 13/16" shaft) NOTE: 3 covered to center spokes w/ grooves on outer ring. Steering Wheel fits: 9N, 2N (1939-47) Replaces: 2N3600 (17-5/8" dia., keyed tapered hub, 11/16" - 13/16" shaft, bare spokes) Chrome Nut (For FDS112) Replaces: 351103-S (5/8"-18 NF x 1.132" tall) Dome Nut Washer (For FDS112) Replaces: 2N3673 (1.497" O.D., 0.645"I.D., 0.180" thick) NOTE: Clear zinc plating. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Steering Wheel fits: Fordson Major, Super Major, Power Major Replaces: E1ADKN3600A (17-1/2" dia., 1" dia. shaft w/ 6 splines on end, 3 covered to center spokes) Steering Wheel (Plastic) Fits: Dexta, Super Dexta Replaces: 957E3600 (17-3/4" dia., 1-1/4" shaft w/ 48 splines, 3 covered to center spokes) Steering Wheel Spinner Fits: Ford models NOTE: Aluminum. 185 Chassis parts Price Transmission Gear Shift Cover Plate Gasket fits: 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series w/ 4 speed transmission (1947-70) Replaces: D5NN7223A USA made FDS253 Countershafts Order # Description / Application Gear Shift Lever Spring fits the following w/ 3 or 4 speed transmission: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000, 3000, 4000; Industrials: 340 thru 4500 w/ 4 speed torque converter transmission Replaces: 9N7227B (2.210" tall, 1.768" tapers to 1.003" O.D., 0.140" wire dia.) Gear shift knobs, boot Ford Chassis parts Description / Application Transmission Input Shaft Seal fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000, 3400, 3500, 4000, 4400, 4500 series (1939-70) (All w/ 3 or 4 speed transmission), Replaces: 8N7052A (1.375" I.D., 2.000" O.D., 0.337" wide) $7.55 Ford ABC2639 Price Gear shift lever, parts cont... Steering column grommets, bushing Order # Price FDS229 $4.95 FDS375 $9.95 FDS373 $9.50 $6.50 Chassis parts $9.25 Steering Column Grommet fits: 8N (194752), Replaces: 8N3578 USA made Steering Column Grommet fits: NAA, Jubilee, Replaces: NAA3578B (2-5/8" O.D.) FDS044 (RH) FDS045 (LH) Steering Column Grommet fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. series (1954-64), Replaces: NCA3578A (2-3/16" O.D.) Steering Column Grommet fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3910, 3930, 4000, 4000SU, 4600, 4600SU, 4610, 5000, 5100, 5200, 5600, 5610, 6600, 6610, 7000, 7100, 7200, 7600, 7610, 7710, 7810 Industrials: 231, 233, 234, 335, 420, 515, 530A, 531, 532, 535, 550, 3400, 3500, 4400, 4500 (1965 & up), Replaces: C5NN3A566B, D2NN3A566B (3" O.D., 1-1/4" hole I.D.) Upper Steering Column Bushing (For Manual & Power Steering) Fits: 2000 thru 7610 (1965 & up) Replaces: C5NN3517A, D5NN3517A, 81811803 (1-916" x 1-1/16", .790" I.D.) FDS046 Price Order # Price $14.95 $84.95 FDS395 FDS162 $14.95 Description / Application Sherman Transmission Instruction Plate Fits: Ford models w/ Sherman Step Up / Step Down transmission FDS047 $154.50 Sherman Transmission Instruction Plate Fits: NAA thru 4000 4-cyl. series (All w/ 4 speed transmission) (thru 64) NOTE: Installs on dash. $11.95 Power Steering Plate fits: 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (thru 64) FDS048 Patent data plates USA made FDS339 Description FDS339 Replaces: 9N14001 FDS338 Replaces: 8N14001 Order # FDS338 Price 9N, 2N (1939-47) ...................................................FDS339............. $13.10 8N (1947-52) ..........................................................FDS338............. $13.10 186 Description / Application Order # Price Description / Application Steering Sector Hardware & Seal Kit (For manual & power steering tractors) Fits: 8N w/ Adjustable side sector gears, Jubilee, NAA, 600, 800, 2000 4-cyl., 4000 4-cyl. series (thru 64) NOTE: Kit includes oil seal, adjuster bolt, nut,washer, o-rings, shim washers & felt seal. 2 used per tractor; Sold individually. ABC1233 $385.00 FDS3213 $589.00 NEW! Steering Gearbox fits: 8N SN: 216989 & up (1950-52) using (2) bolt side sectors, Replaces: 8N3503B NOTE: This gearbox is shipped dry & needs to have 90 wt. oil added before using. The steering pitman arms are included. BACK IN STOCK! Belt Driven Power Steering Pump (For tractors using Eaton style pump) fits: 601, 700, 701, 801, 900, 901, 1801, 2000, 4000 4-cyl. (thur 1964) (All w/ canister on top of pump) Replaces: Eaton P761, 20928, 503-1003, 503-1005-005, Ford C0NN3A674H, C3NN3A674C NOTE: For 5/8-18" male inverted flare pressure line. Can be adapted to tractors using Char-Lynn power steering w/ Eaton pump. Does not include brackets, reservoir or pulley. Some Ford applications will require a new pressure hose to be made. ABC3275 $18.50 NEW! 10-pc. Eaton Power Steering Pump Seal & O-Ring Kit fits: 601 - 4000 4-cyl. (All w/ Eaton belt driven power steering pump with canister on top of pump) NOTE: See website for all applications. Includes filter o-ring. Fits ABC1233 Pump. ABC3277 $12.50 NEW! Power Steering Pump Filter Fits: 601 thru 4000 4-cyl. & Majors (All using Eaton belt driven power steering pump w/ canister on top of pump), Replaces: AE33538A, E101LD9 (1.020" I.D., 2.990" O.D., 1.610" thick) USA made NOTE: Check website for additional application information. Reservoir gasket / o-ring not included. FDS387 $26.75 Steering Shaft Bearing Kit (For manual steering tractors) fits: 8N, NAA, Jubilee, 600, 800, 2000, 3000, 4000 (All to 8/31/1968), Replaces: 8N3571 (bearing), 8N3552 (cup), New # C5NN3552A (cup) NOTE: Kit includes: (2) bearings & (2) bearing cups. Bearing & cup (race) must be used together. Do not mix bearing or cup w/ old, original parts. FDS1350 $348.50 Power Steering Pump w/ Reservoir Fits October/1968 & up: 2000 thru 2600, 3000 - 3900, 4000 - 4600, 5000 5700, 6600, 6700, 7000 - 7700, Replaces: D8NN3K514GA, GB, GC, E6NN3K514EA (2.74 GPM, 1100 PSI) NOTE: Pressure is preset at 1100 PSI. Has 1 return port, if your original has 2 ports you will need to add a ’tee’. When mounted return fitting is at 1:00. FDS1274 $54.95 Power Steering Pump Pulley (For tractors with canister on top of pump) fits: 601, 700, 701, 740, 801, 900, 901, 950, 960, 2000, 4000 4-cyl series (thru 1964) Replaces: 231102, EBJ33556A (3.750" O.D., .671" bore, .125" keyway, .500" wide belt groove) NOTE: Cast iron. FDS3219 $589.00 $17.95 Steering Wheel Cover w/ Grease Fitting Hole, Spring & Felt Seal fits: 9N, 2N (1939-47), Replaces: 9N3669 NOTE: Chrome. FDS388 Price $23.35 $78.60 Steering Shaft w/ Pinion fits: 9N, 2N (1939-47), Replaces: 9N3525 FDS408 Order # ABC441 Steering Gear Sector w/ Arm Fits: 9N, 2N (1939-47) $139.95 FDS044 Replaces: 9N3526 FDS045 Replaces: 9N3527 Steering wheel plates - USA made FDS163 Description / Application $139.95 $154.50 Steering Shaft Bearing Kit fits: 9N, 2N (1939-47), 700, 900, Replaces: 68-3571A (bearing), 9N3573 (cone), B3552 (bearing cup) NOTE: Will fit FDS046 steering shaft w/ pinion. Kit includes: (2) bearings, (2) cones & (2) bearing cups. Bearing & cup (race) must be used together. Do not mix bearing or cup w/ old, original parts. NEW! Double LH Steering Sector (For manual & power steering tractors w/ adjustable steering box) fits: 8N SN: 216989 & up, NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. series (June 1950-64) Replaces: 8N-3527-B (6-7/8" long; 7 teeth) NOTE: For wide-style tooth (measures .200" wide at top of the tooth). Two different tooth widths were made, so customer may have to purchase both FDS048 & FDS047. NEW! Single RH Steering Sector (For manual & power steering tractors w/ adjustable steering box) fits: 8N SN: 216989 & up, NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. series (June 1950-64) Replaces: 8N-3526-B (6-7/8" long; 5 teeth) NOTE: For wide-style tooth (measures .200" wide at top of the tooth). Two different tooth widths were made, so customer may have to purchase both FDS048 & FDS047. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Power steering parts FDS3224 $589.00 FDS1205 $2.00 ABC1996 $9.95 ABC2008 $12.50 ABC528 $39.95 NEW! Steering Gearbox fits: NAA, Jubilee, Golden Jubilee (1953-54) (All w/ manual steering), Replaces: NAA3503B NOTE: This gearbox is shipped dry & needs to have 90 wt. oil added before using. The steering pitman arms are included. NEW! Steering Gearbox fits: 600, 800, 2000 4-cyl., 4000 4-cyl. (1954-64) (All w/ manual steering). Fits Utilities only NOT Row-Crops, Highcrops or Offsets Replaces: NCA3503A, C3NN3503E NOTE: This gearbox is shipped dry & needs to have 90 wt. oil added before using. The steering pitman arms are included. Felt Seal fits: 8N thru 4000 4 cyl as a steering sector felt seal; 2000 3-cyl thru 8340 as a disc brake cross shaft seal Replaces: 8N3586 NOTE: 2 used per tractor; Sold individually. Steering Gearbox Pitman Shaft Seal Fits: 5000, 5110, 5600, 5900, 6410, 6600, 6610, 7000, 7600 (All w/ manual steering) Replaces: C5NN3C615B, 81803190 (1.500" I.D., 2.000" O.D., 0.250" wide) Steering Gearbox Side Sector Seal Fits: 700 & 900 series; (2110 & 4110 4-cyl.) (1955-64), Replaces: NCB3591B (1.375" I.D., 2.110" O.D., 0.315" wide) USA made Top Bearing Steering Shaft Kit (For manual steering only) fits: 8N, Jubilee, NAA, 600, 601, 700, 701, 800, 801, 900, 901, 2000, 4000 4-cyl. Replaces: 8N3518 (seat), 8N3520 (spring), C5NN3N716A (steel bearing assy) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Power steering parts continue on next page 187 Chassis parts FDS1380 Order # Description / Application Steering parts cont... Ford Ford FDS424 Steering parts Power steering parts cont... Order # Price FDS1163 $5.65 FDS461 $249.95 ABC267 $32.30 Description / Application Power Steering Pump Cap fits the following October/1968 & up: 2000 thru TW35 w/ horizontal power steering pump reservoir, Replaces: C9NN3D588A, D2NN3A006B (1.500" I.D.) Power Steering Cylinder fits: 601, 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 4000 & SU, 4600 SU, 4610 (1957 & up) (All w/ dual cylinder steering), Replaces: D4NN3A540B, D4NN3D547B, E2NN3A540BA, E4NN3A540AA (1/2" dia. rod, 7/16" threaded end) USA made NOTE: LH & RH are the same Power Steering Cylinder fits: 601, 801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3600, 3610, 3910, 4000 & SU, 4600 SU, 4610, 231, 335, 531 (1961 & up) (All w/ dual cylinder steering) Replaces: C5NN3A739G, C5NN3C578B, D4NN3A540A, E9NN3A540AA (5/8" dia. rod, 7/16" threaded end) USA made NOTE: Can also replace 1/2" rod cylinders. Power Steering. LH & RH are the same. Power Steering Cylinder End Fits: 2000, 3000, 4000, 2610, 3610, 4610 series (1965 & up) Replaces: C5NN3A302B (7/16" - 20 internal thread) NOTE: LH & RH are the same. Will not fit tractors below 1964. stud. Order # Price FDS2478 (RH) $94.95 FDS2474 (LH) $94.95 FDS314 FDS2487 (RH) $16.65 Description / Application Tie Rod Assembly (Drag link Assembly) Fits: 9N, 2N (1939 - 47) FDS2478 Replaces: 9N3304 FDS2474 Replaces: 9N3305 NOTE: Adjustable from approximately 38-1/2" to 39-3/16" c.c. tie rod studs. Front Tie Rod End fits: Some 9N, 2N (1939-47), Replaces: 9N3270 (.687" - 18 RH thread, 3.187" to center of post) FDS315 Order # Price ABC265 $16.50 $72.95 Tie Rod Assembly (Tie Rod Ends, Clamps & Drag Link Tube) fits: 8N (1947-52) w/ late adjustable-style steering box Replaces: 8N3304B, 8N3305B (32-1/2" long tube; 35-1/4 to 38-1/4" adjustment) NOTE: Check measurement before ordering. $16.65 Order # Price FDS336 $3.50 FDS337 $3.99 FDS1382 FDS1384 Description Fits: 2N thru 4600SU FDS1382 Replaces: 8N3440B, 313319, 957E3440A,B, 83924040, C7NN3N406A, EONN3N406BA FDS1384 Replaces: 9N3442, C5NN3N442A,C, EONN3N442BA Order # Price Radius Rod Ball Cap..............................................FDS1382....... $9.15 NOTE: 2 used per tractor; Sold individually. Radius Rod Ball Socket..........................................FDS1384....... $18.90 NOTE: 2 used per tractor; Sold individually. 188 Description / Application Rear Tie Rod End fits: Some 9N, 2N, 8N, NAA, 600, 601, 800, 801, 2000 4-cyl., 4000 4-cyl. (1939-64) w/ manual steering not industrial axle, Replaces: NAA33271A (.687" - 18 RH thread, 4.250" to center of post) $94.95 Tie Rod Assembly (Drag link Assembly) Fits: Jubilee, 600, 800, 2000 thru 4000 4-cyl. FDS2492 $94.95 Utilities only (1953 - 64) (All w/out power (LH) steering) FDS2497 Replaces: NAA3314B, NAA3270A, NAA33271A FDS2492 Replaces: NAA33315A, NAA3270A, NAA33271A NOTE: Adjustable from approximately 42-3/8" to 46-1/2" c.c. tie rod studs ABC235 $17.95 Front Tie Rod End fits: Dexta, Super Dexta, NAA, Jubilee, 600, 601, 800, 801, 2000 4-cyl., 4000 4-cyl. (1953-64) w/ manual steering not industrial axle Replaces: 957E3290B, NAA3270A (.687" - 18 LH thread, 3.875" to center of post) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price Description / Application $36.50 Front Axle Support Pin fits: NAA, Jubilee (1953-54); Fits the following w/ front hydraulic pump drive: (2N SN: 167489 & up), 8N; Fits following w/ all purpose wide front axle: 6000 1/1963 - 12/1966 Replaces: NAA3126B (1.743" O.D., 1.310" I.D.) NOTE: Not threaded. ABC379 $10.60 Front Pivot Bushing fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. series (1939-64) (All w/ standard front axle), Replaces: 2N3039 (1.770" I.D.) USA made NOTE: Will not fit heavy duty or industrial axles. Front Tie Rod Boot fits: 9N, 2N (1939-47) Replaces: 78-3332 (1.200" base, .475" tall, .500" hole) Front Tie Rod Boot fits: 8N, NAA, Jubilee, 600, 800 (1947-57), Replaces: 8N3332 (1.450" base, .600" tall, .550" hole I.D.) NOTE: Also works as a power steering cylinder end boot 601 thru 4610. $9.25 Rear Tie Rod Boot w/ Rubber Insert Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. (1939-64) Replaces: 9N3324, AONN3324A (1.425" base, .850" tall, .700" hole) FDS484 $15.75 Rear Tie Rod Boot w/ Leather Insert Fits: 9N, 2N, 8N; Serviceable for NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. (1939 - 64), Replaces: 9N3324 NOTE: Exact of original. Spindle parts Order # ABC151 Price $9.95 ABC1442 $2.95 Universal tie rod boots fits: Ford models Specify size when ordering (Base x Height x Hole I.D.) Front Tie Rod End fits: 8N (1947-52) Replaces: 8N3270 (.687" - 18 LH thread, 4.00" to center of post) FDS2497 (RH) Order # ABC088 Description / Application FDS335 ABC368 Radius rod parts Front axle parts cont... Tie rod boots $94.95 Tie Rod Assembly (Drag link Assembly) Fits: 8N up to SN: 216989 w/ early 4 bolt FDS2482 $94.95 side sector steering gear box (LH) FDS2487 Replaces: 8N3304A FDS2482 Replaces: 8N3305A NOTE: Adjustable from approximately 36" to 39-1/2" c-c tie rod studs. FDS393 Tie rod assembly, ends cont... JDS736 ABC371 ABC369 $3.35 Also fits as a rear tie rod boot for 601, 801, 2000, 4000 4-cyl., Replaces: A0NN3324A (1.675" base, .900" tall, .625" hole) JDS736 $4.25 (1.500" base, .735" tall, .550" hole) ABC371 $3.35 (1.300" base, .965" tall, .500" hole) ABC369 $2.95 (1.575" base, .600" tall, .650" hole) ABC370 $3.50 (1.800" base, .765" tall, .740" hole) Price ABC087 $32.50 Spindle Dust Seal fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 601, 700, 701, 800, 801, 900, 901, 2000 4-cyl., 4000 4-cyl. (thru 1964); 2000 thru 4600SU, 4610, 6000 (1965 & up), Replaces: 8N3528, C5NN3125A (1.225" I.D.) $3.95 EACH Bushing for Front Spindle fits upper & lower on the following models: 9N, 2N, 8N, NAA, Jubilee (1939-54); Fits upper only on the following models: 501, 600, 800; 700, 900 series (Both w/ wide front) 2000 3 & 4-cyl., 2600, (3000 except Vineyard), 3600, 3610, 3900, 3910, 4000 4-cyl., 4100 3-cyl., 4600SU, 4610, 6000, Dexta (1955-81) (All w/ standard adjustable wide front, not for heavy duty axle), Replaces: 2N3109 (1.250" I.D., 1.375" O.D., 1.500" long) NOTE: Will not fit heavy duty or industrial axles. ABC381 $12.95 Spindle Bushing Kit fits: 600, 700, 800, 900 w/ Wide Front, 2000, 2600, 3600, 3900, 4000 except Vineyard, Dexta, Super Dexta, 3000, 4100, 4600, 4600SU, 4610 (All w/ standard axle), Replaces: contains (2) 2N3109 (upper) & (2) NCA3110A (lower) (2N3109 = 1.250" I.D., 1.375" O.D., 1.500" long NCA3110A = 1.352" I.D., 1.474 O.D., 1.490" long) NOTE: Will not fit heavy duty or industrial axles. Front axle parts Order # Thrust Bearing (For Front Spindle) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 series, Dexta, Super Dexta, 2000, 3000, 4000SU (1939 & up) all w/ adjustable I Beam Regular Front Axle (Not H.D. axle) Replaces: C0NN3123B (1.350" I.D., 2.195" O.D.) ABC468 ABC370 ABC368 Description / Application Description / Application Front Axle Support Pin fits: 9N, 2N, 8N; 6000 w/ All Purpose wide front axle (1/1963 - 12/1966), Replaces: 2N3126D (1.743" O.D., 1.310" I.D.) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 189 Chassis parts Chassis parts $249.95 NOTE: Length is from end of shaft / tube to center of post / ball Ford Ford FDS459 Tie rod assembly, ends Seat pan, parts Monroe® easy ride seat parts cont... The following seat parts fit 9N, 2N, Early 8N: Order # Price FDS067 $48.50 ABC372 $18.30 FDS068 Description / Application Seat Pan, Replaces: 8N400 (19" dia.; 5/8" center bolt hole) NOTE: Steel, 9 hole, bolt down, nonflip back. Order # Price IHS329 $34.50 MHS044 $39.95 Seat Repair Kit w/ Rivets (For ABC3211 & FDS067 Seat Pan) (5-1/2" O.D.; 5/8" center bolt hole) USA made $49.95 ABC526 $9.65 Seat Spring, Replaces: 9N404 Ford $22.90 The following seat parts fit Late 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801 series, 2000, 4000 4-cyl. series (thru 64), IHS325 $2.05 'Some' Dexta, Super Dexta: Order # Price FDS105 $49.10 FDS106 Description / Application Seat Pan w/ Hinge Half (For Flip-Back Seat), Replaces: C5NN400AE NOTE: Also serviceable for resto-ride seat. $16.15 Seat Hinge & Bolt (For Flip-Back Seat) Replaces: NCA436A, 352644S36 FDS107 FDS294 FDS232 $44.50 $10.75 $3.50 Order # Price IHS030 $28.50 190 $24.50 Seat Shock Bolt (For IHS329 & IHS347) Replaces: 230290 (7/16" NC thread, .625" shoulder, 2.380" o/a length) USA made Seat Pivot Support Rod fits: 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 230287 (6") NOTE: Includes rod, (2) flat washer, (2) rubber bushings & (2) 5 bolts. Rubber Seat Bushing fits: 9N, 2N, 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 230288 NOTE: 2 used per horizontal bolt; Sold individually. Seat assembly, parts Order # Price ABC445 $139.30 FDS299 (LH) $54.95 FDS300 (RH) $54.95 Description / Application Seat Spring Coil fits: 9N, 2N, 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 230279 JDS533 Seat Bushing & Pin Kit (For FDS299, FDS300), Replaces: 230612, 230626, 305191 NOTE: Bushings must be reamed/honed when installed. Seat Adjustment Handle fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (thru 64) w/ "Rest-O-Ride" seats; Also fits Major, Super Major, Power Major w/ Deluxe seat; Also fits 6000 (1961-64) w/ Regular seat not Deluxe seat Replaces: NDA462A FDS299 FDS300 Universal Full Suspension Seat w/ Back Rest & 5-Angle Base (w/ slide track & mounting brackets) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3400, 3500, 3550, 3600, 3610, 3910, 3930, 4000, 4000SU, 4100, 4110 4400, 4500, 4600, 4600SU, 4610, 5000, 5600, 5610, 5610SU, 5900, 6600, 6610, 7000, 7600, 7610 (All w/out cabs) Replaces: D9NN400DB12B NOTE: Can be adapted to fit many utility tractors & lawn mowers. Customer may have to trim base on tractors using remote hydraulics. Rubber Seat Spring fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (thru 64) w/ "Rest-O-Ride" seats; Major, Super Major, Power Major w/ Deluxe seat; 6000 (1961-64) w/ Regular seat not Deluxe seat FDS299 Replaces: NDA448A FDS300 Replaces: NDA447A NOTE: FDS299 & FDS300 springs do not come w/ bushings. You must reuse old ones or purchase our #FDS477 kit. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Price FDS1226 $36.50 MIS006DB $33.75 Tractor Seat Pad (Blue & white) $33.75 Tractor Seat Pad (Red & white) Fits: 9N thru 4000 4-cyl. series, 4030, 4040, 4121, 4130, 4140 (1939-64) (All w/ Knoedler 1800 seat) USA made Description Order # Description Tractor Seat Pad (Black w/ red/white "Ford" script, black/white "Tractor") Knoedler seat part Price Seat Bearing (For Knoedler Seats).........................ABC537......... $14.30 NOTE: 2 to 8 used per tractor; Sold individually. Fenders, parts - Licensed by Ford "The only licensed stamped fenders on the market!" • Stamped w/ raised Ford "script" like original! • Not plastic molded where embossed "Script" will sand off! Tractor seat pads Order # Description / Application Order # MIS006DR (Foam pad, drawstring) Seat to Spring Retaining Clip w/ Rivets (For original 3" wide Seat Spring) Replaces: 8N433 Monroe® easy ride seat parts Seat Shock Absorber w/ Bushings Fits: 8N, NAA, Jubilee w/ optional Monroe® Easy Ride seat, Replaces: 231239 (Center-to-center compressed = 6-1/4", fully extended = 8-1/4) NOTE: One horizontal bolt hole at each end. Description / Application Fits Ford models w/ 19" pan (side to side) Seat Spring (For Flip-Back Seat) Replaces: NCA404B (2-1/4" wide) Seat to Spring Rubber Bumper (For Flip-Back Seat), Replaces: 8N434B (7/8" O.D.) NOTE: (1) FDS232 Rubber Bumper required per tractor. Rear-Mounted Seat Shock Absorber Fits: 9N, 2N w/ optional Monroe® Easy Ride seat (Center-to-center compressed = 11-1/2", Fully extended = 18-1/8") USA made Price $39.95 Chassis parts Chassis parts Flip-back seat pan, parts Order # FDS477 Tractor seat pads cont... Ford IHS585 Description / Application Seat assembly, parts cont... FDS283 Price Description • Fenders are sold individually. • Fit to tractor before painting. Order # Price FDS070 $99.50 ABC2255 $28.95 Tractor Seat Pad (Red & white w/ red "Ford" script) FDS102 $159.95 Tractor Seat Pad (Blue & white w/ blue "Ford" script) FDS414 $248.30 $36.50 Tractor Seat Pad (Dark red w/ white piping w/ white "Ford" script) FDS284 $36.50 Tractor Seat Pad (Dark blue w/ white piping w/ white "Ford" script) FDS230 FDS321 FDS322 $36.50 $36.50 $36.50 Tractor Seat Pad (Gray & white w/ gray "Ford" script) Description / Application Fender Skin only w/out raised Ford "script" imprint Fits: 9N, 2N; 8N (thru June 1950) Replaces: 9N16312 NOTE: Steel, primer paint. Fender Bolt Kit fits: 9N thru NAA; Serviceable for 600 thru 4000 4 cyl thru 1964 when not equipped with sway bar brackets or loader brackets Replaces: 375651S8 NOTE: Includes 4 carriage bolts, nuts, lock washers. Fender Skin only w/ raised Ford "script" imprint fits: 8N (June 1950-52); Jubilee (1953), NAA (1954), Replaces: 8N16312C NOTE: Steel, primer paint. Fender Skin only w/ raised Ford "script" imprint fits: 600, 800 series (1954-57) Replaces: NCB16312C (25" H x 48" W x 7" wide 'top lip') NOTE: Steel, primer paint. Fenders, parts continue on next page STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com 191 Fenders, parts - Licensed by Ford cont... "The only licensed stamped fenders on the market!" Running boards, parts Order # • Stamped w/ raised Ford "script" like original! • Not plastic molded where embossed "Script" will sand off! • Fenders are sold individually. ABC439 (LH) • Fit to tractor before painting. Order # FDS078 (w/out script) ABC437 FDS174 FDS228 FDS170 $179.95 $153.20 $1.00 $14.25 $14.25 Fender Skin only w/ raised Ford "script" imprint fits: 501, 601, 701, 801, 901 (1957-62), 1801, 2000, 4000 4 cyl.; Serviceable for 2000 3-cyl. thru 4610 (1965 & up) Replaces: C5NN16312AK, C5NN16312AU, E1NN16315DA (17-3/4" H x 42" W) NOTE: Steel, primer paint ABC440 (RH) Price $32.50 Running Board (Foot Platform) w/out Rear Bracket $69.95 Serviceable for 9N, 2N NOTE: Sold individually. Description / Application Fits: 501 thru 8830 (1955 & up) Industrial: 340A, 420, 445, 445A, 535, 540A, 540B, 545 Replaces: C5NN17005C, C5NN17005F11M (4" wide x 16" long x 4-1/4" tall) NOTE: Fits on FDS078, FDS238, FDS301 fenders. Order # Price ABC084 $19.75 EACH FDS1870 $0.75 FDS1445 $99.95 FDS194 $78.95 Brake parts ABC446 FDS3241 Fender Assembly w/ Bracket Fits: 601, 801, 1801 series, 2000, 2310, 2600, 2610, 2810, 3000, 3400, 3500, 3600, 3610, 3900, 3910, 4000 & SU, 4100, 4110, 4400, 4500, 4600SU & 4610 (1965 & up), 340A, 420, 445, 445A, 535, 540A, 540B, 545 Replaces: C5NN16312AK, C5NN16312AU (Heavy gauge, Skin measures 17-3/4" H x 42" W) NOTE: Steel, primer paint. FDS3244 $15.35 $21.50 Rear Bracket Serviceable for 9N, 2N NOTE: Sold individually. NEW! Front Running Board Support Bracket fits: 8N, NAA thru 4000 4-cyl. (1947-64), Replaces: 8N16470 NOTE: 2 used per tractor; Sold individually. Fits left or right. Does not fit Row-Crops, LCGs (low ground clearance), Select-OSpeeds or Industrials. Rivet (For Fender Skin) fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (thru 57) (.371" dia., 1.010" o/a length, .746" head dia., .800" useable length) NOTE: 4 used per fender (9N, 2N, 8N, NAA) & 8 used per fender (600, 800); Sold individually. Ford "Script" Painting Mask Kit For 8N (1947-52) fenders & hoods (2) - hood & (2) - fender self-adhesive masks per kit Licensed by Ford USA made FDS2280 $47.25 Price ABC192 $54.25 ABC2951 (2-pc. set) $39.95 ABC020 (4-pc. set) $74.95 $16.95 Running Board to Bracket Hardware Kit Fits: 8N, NAA, Jubilee, Golden Jubilee (1947-54), Replaces: 355471S8 NOTE: Includes 8 special carriage style bolts, lock washers, nuts. MIS1131 $33.95 Toolboxes Order # Price ABC308 $40.75 FDS247 Ford "Script" Painting Mask Kit For NAA, Jubilee fenders & hoods, (600, 800 series (thru 1957) hood only) (2) - hood & (2) - fender self-adhesive masks per kit Licensed by Ford USA made Order # $32.50 NEW! Right Rear Running Board Support Bracket fits: 8N (1947-52) Replaces: 8N16486 Fender Light Brackets, Pair Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54), Replaces: 9N13470, 9N13471 NOTE: Sold as pair. Ford gray. 192 Order # ABC472 FDS136 FDS214 $34.50 $74.95 $47.95 Application Fits: 9N, 2N (11" long, 4" wide, 4-1/2" tall, Bolt holes center to center = 5-1/2") NOTE: Must redrill hole. Fits: 8N, Replaces: 8N17005 NOTE: Mounts under the hood. Like original. Fits: Jubilee, NAA (1953-54) Replaces: NAA16451 USA made NOTE: Must be spot welded to existing running board. Fits: 501, 600, 700, 800, 900, 2000, 4000 4-cyl. series (1954-64) Replaces: C5NN17005F, NCA17005A NOTE: Fits between step plate & rear axle housing. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm MIS2547 ABC2953 (2-pc. set) ABC083 (4-pc. set) $89.95 Description / Application Brake Lining Set w/ Rivets fits: 9N, 2N (1939-47), Replaces: 9N2021B (2" W x 15-1/2" L) NOTE: Set includes: 4 brake linings w/ rivets. No returns on broken shoes. Bonded Brake Shoe Set Fits: 9N, 2N (1939-47) Replaces: 9N2019 Brake Riveting Tool Kit (1-1/4" throat, 1/8" dia. rivet punch) NOTE: Use to rivet brake linings to existing shoe or band. Includes a tool to drive out old rivets, a tool to drill & countersink linings, a tool to peen the new rivet & instructions. Mounts into vice. Mounts into vice. Not for use w/ deep recess shoes. Bonded Brake Shoe fits: 501, 600, 700, 800, 900, 1801, 2000, 4000 series (1954-64) Replaces: NCA2218B NOTE: 4 required per tractor; Sold individually. Brake Drum Retaining Screw fits: 8N thru 981 (thru 1959), Replaces: 24667S, 24667S8 (Zinc; 3/8"-16NC x 3/4") NOTE: 2 to 4 used per tractor; Sold individually. Brake Backing Plate fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N2212B USA made NOTE: 2 used per tractor; Sold individually. Brake Dust Shield w/ Felt Seal fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N2255 (plate) & 8N2217 (seal) NOTE: 2 used per tractor; Sold individually. FDS251 $4.75 Felt Seal only (For Brake Dust Shield) Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2217 NOTE: 2 used per tractor; Sold individually. FDS241 $19.95 Parking Brake Lever fits: NAA, Jubilee, 600, 700, 800, 900 (1953-57) Replaces: NAA2782A NOTE: 2 used per tractor; Sold individually. FDS412 $7.10 Riveting Tool (For brake shoe & disc relining for most tractors) (3-3/8" deep throat x 2-1/8" high throat) USA made NOTE: Includes 2 punches. Brake Adjusting Hole Cover fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000 series, (4000 4-cyl. series) (1947 & up), Replaces: H2092, ERK27670 FDS417 $4.95 EACH Bonded Brake Shoe Set Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N2200B Brake Pedal Return Spring fits: 2000, 2310, 2600, 2610, 2810, 2910, 3000, 3600, 3610, 3900, 4000, 4000 SU, 4100, 4110, 4500, 4600; Industrials: 230A & up (1965 & up), Replaces: C5NN2472B, E1NN2472BA (3.221" o/a length) NOTE: Mounts under running board. 2 used per tractor; Sold individually. Go to website for full applications. ABC1225 $2.15 $26.50 $49.25 Description / Application STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Disc Brake Ball fits: 2810 thru 7710 Replaces: D5NN2N141A (7/8" dia. steel ball) NOTE: Sold individually. 193 Chassis parts Chassis parts FDS301 (w/ script) $142.15 Description / Application Description / Application $69.95 Brake parts cont... Ford Ford FDS238 Price Price Toolboxes cont... Brake repair kits Rear axle, hub, parts NOTE: Each complete kit contains all the small parts for comprehensive rebuilding of brake actuating mechanism when installing new shoes. Does not include shoes. Order # FDS1224 Price $34.95 FDS043 $35.50 FDS255 $5.30 $11.10 Differential side cover gasket Fits: 9N, 2N, 8N, (501 thru 4000 4-cyl.) (1939-64) EXCEPT Jubilee; Also a PTO Shifter Plate Cover to Differential Housing Gasket for Ford models (1939 & up) (including NAA), Replaces: 9N4131 USA made FDS479 $2.00 ABC234 $43.80 FDS1201 $7.50 FDS1211 $1.30 Price Differential Side Cover Gasket.........................ABC289.............$1.00 FDS394 $2.20 Pinion shaft seal Fits: NAA, Jubilee, Replaces: NAA4676A (1.375" I.D., 2.378" O.D., 0.312" wide) USA made Description Order # ABC386 $1.70 Price Pinion Shaft Seal..................................................ABC1543...........$13.95 ABC357 Rear end overhaul gasket kit Fits: 9N, 2N, 8N (1939-52) Description Order # Price 7-Piece Rear End Overhaul Gasket Kit............ ABC433............$11.65 194 $10.65 Price $15.15 ABC199 ABC197 $65.30 $11.40 Rear Axle Hub Washer fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N4293 USA made Rear Axle Nut & Snap Ring Kit fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N4179, 8N4187, CBPN4179A USA made NOTE: Original style. Description / Application Axle Shaft Collar fits: 9N, 2N (1939-47) Replaces: 9N4132 USA made Axle Shaft Cone fits: 9N, 2N, 8N, NAA, Jubilee (1939-54), Replaces: 2N4221 USA made Axle Shaft Cup fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 4-cyl., 4000 4-cyl. (1939-64), Replaces: 9N4222 Order # Price Price Rear Axle Shaft Outer Oil Seal fits: 2000, 2600, 2610, 3000, 3600, 3610 (1965 & up) Replaces: C5NN4115B (3.125" I.D., 3.880" O.D., 0.500" wide) NOTE: 2 used per tractor; Sold individually. ABC491 $5.75 FDS428 $4.95 Rear Axle Shaft Outer Oil Seal Gasket (Rubber) fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N4284 (1 15/16" I.D., 2-3/16" O.D.) USA made NOTE: 2 used per tractor; Sold individually. FDS431 $3.95 Rear Axle Shaft Outer Oil Seal Retainer to Housing Gasket fits: 8N up to SN: 486752 Replaces: 8N4225 (3 3/4" I.D., 4-3/8" O.D.) NOTE: 2 used per tractor; Sold individually. Gaskets Rear axle shaft seals Order # Description / Application Outer seals cont... Description / Application Inner seals Snap Ring only (For FDS318) Replaces: 8N4187 USA made ABC382 $15.70 Wheel Clamp Lock Nut fits: 8N, NAA, Jubilee (1947-54) (1-1/4" - 18) NOTE: No re-threading necessary on worn shafts. Rear Lug Stud fits: 9N, 2N (1939-47) Replaces: 9N1117 (5/8" x 18 NF thread, 1.875" o/a length) NOTE: 12 required per tractor; Sold individually. Rear Lug Nut fits: 9N, 2N (1939-47) Replaces: 33806S7, 81871950 (5/8"-18 thread) USA made NOTE: 12 required per tractor; Sold individually. Rear Lug Stud fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. Replaces: 312696 (5/8" x 18 thread, 1-5/8" o/a length) USA made NOTE: 16 used per tractor; Sold individually. Rear Lug Nut fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2600, 2610, 2810, 2910, 3000, 3610, 3910, 4000 4-cyl., 4110, Replaces: 8N1134 (5/8" x 18) USA made NOTE: 16 required per tractor; Sold individually. For 2600-up check thread size. Rear Axle Shaft Paper Gaskets / Shims Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: 9N4130, 8N4229E (0.015" thick) USA made NOTE: Use for seal between bearing retainer, axle housing or backing plate. Use in multiples to replace shims 8N4229. Sold as a package of 10. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Rear Axle Shaft Inner Oil Seal Pair Fits: 9N, 2N (1939-47) NOTE: This is an improved differential seal which stops leakage from differential into the brakes. Installs without pulling axle bearing. Slides on the axle & taps into place at lip of bearing retainer. Must pack the wheel bearing w/ grease when using these seals. Sold as a pair. ABC196 $11.95 ABC282 $6.75 ABC194 $19.40 Rear Axle Shaft Outer Oil Seal Pair fits: 9N, 2N (1939-47), Replaces: 9N4251, D6NN4251A (2.375" I.D., 3.486" O.D., 0.657" wide) FDS427 $34.75 Rear Axle Shaft Outer Oil Seal Pair w/ Sheet Metal Retainers fits: 8N up to SN: 486752, Replaces: A8NN4248A (3.75" O.D.) NOTE: Used on tractors w/ sheet metal seal retainers. 2 used per tractor; Sold in pairs. Rear Axle Shaft Inner Oil Seal Pair Fits: 8N SN: 486753 & up, NAA, Jubilee Replaces: 8N4233A (2.000" I.D., 2.754" O.D., 0.510" wide) $19.40 Order # ABC317 Price Description / Application $7.95 Quadrant Stop Kit w/ Wing Nut & Flat Washer fits: Ford models (1939-64) except Majors, Replaces: 9N521 FDS457 $83.55 Hydraulic Valve Adaptor w/ O-Rings, Bolts & Instructions fits: Dexta, Major, 501, 600, 700, 800, 900 series, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610 series, Industrials: 230 thru 545 (1954-up) ((2) 3/8" NPT ports) USA made NOTE: Installs between your existing hydraulic block off plate on your lift cover to run external hydraulics off the tractor. FDS3364 $265.00 NEW! Single Spool Double Acting Hydraulic Remote Valve Kit fits: 501, 600, 700, 800, 900 series, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610 series; Industrials: 230 thru 545 Replaces: 311877, 290066 NOTE: Includes valve, lever, O-rings, hoses, hose bracket & female couplers. Mounts on lift cover under the seat. FDS3351 $38.65 Rear Axle Shaft Inner Oil Seal fits: Dexta, Super Dexta, 2000, 3000, 2600, 2610, 3600, 3610 (1965 & up), Replaces: 957E4233B, C9NN4N109A (1.869" I.D.; 2.750" O.D.; 0.504" wide) Outer seals ABC193 Hydraulic lift parts Rear Axle Shaft Outer Oil Seal Pair Fits: 8N SN: 486753 & up, NAA, Jubilee Replaces: D5NN4115A (2.750" I.D., 3.765" O.D., 0.438" wide) NOTE: Used on tractors w/out sheet metal seal retainers. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com NEW! Hydraulic Lift Cover Block-Off Plate fits: 501, 600, 700, 800, 900 series, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000, 4600, 4610 series; Industrials: 230 thru 545, Replaces: C5NN475B, 81811978 (3-7/8" wide x 6-3/8" long) Hydraulic lift parts continue on next page 195 Chassis parts Chassis parts $84.25 $91.45 Order # Axle Shaft fits: 8N, NAA, Jubilee (1947-54), Replaces: 8N4235C Order # ABC264 Rear axle shaft seals Ford Ford FDS318 Fits: 501, 600, 700, 800, 900, 1801 series, 2000, 4000 4-cyl. series (1954-64) Replaces: NCA2250 USA made NOTE: Repairs 1 side. Description Description / Application Rear Hub Assembly w/ Bolts Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8N1171 Fits: 8N, NAA, Jubilee (1947-54) Replaces: 8NAA2250 NOTE: Repairs 1 side. ABC165 Price $198.00 Application Fits: 9N, 2N (1939-47) Replaces: 9N2065 NOTE: Repairs 1 side. FDS252 Order # ABC261 Rear axle, hub, parts cont... Hydraulic lift parts cont... Order # Price ABC299 $78.50 ABC300 Hydraulic lift parts cont... Description / Application Hydraulic Lift Cylinder (For 2-1/2" dia. piston) fits: 9N, 2N, 8N Replaces: 9N510D $35.10 Hydraulic Lift Piston fits: 9N, 2N, 8N (1939-52), Replaces: 9N530B USA made ABC266 $30.20 Chassis parts Order # Price $13.50 3-Piece Steel Ring Kit (For ABC300) USA made ABC090 $9.60 $1.25 $2.90 ABC431 Washer (For ABC314) USA made FDS3354 FDS273 $23.60 $42.95 FDS242 $27.25 FDS073 $3.50 ABC219 196 $6.05 NEW! Hydraulic Lift Cylinder Safety Valve fits: Dexta, (501, 600, 700, 800, 900, 1801 series), 2000, 2600, 2610, 3000, 3600, 3610, (4000 4-cyl. only), 4600, 4610, 6000; Industrials: 230A thru 545A Replaces: 957E984B, 81717252 (1.597" o/a length, 9/16" - 18 thread) Hydraulic Lift Draft Control Plunger Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. (1939-64), Replaces: 8N541B NOTE: Fine thread-style $9.95 Price $100.75 ABC551 (RH) $100.75 Fits: 9N, 2N, 8N USA made NOTE: Kit includes: (2) valve chamber gaskets, (1) lift cover gasket, (1) pump base gasket, (2) inspection cover gasket, (1) cylinder to center housing cover gasket, (2) hydraulic lift cylinder housing gasket, (1) PTO gasket, (1) lift handle quadrant gasket, lift piston o-ring & back up washer. Fits: NAA, Jubilee (1953-54) NOTE: Kit includes: (1) lift housing to rear end gasket, (1) lift cylinder gasket, (1) lift piston o-ring & back up washer, (1) lift handle quadrant gasket, miscellaneous o-rings for lift cylinder. ABC549 ABC551 FDS353 $24.95 ABC091 $3.50 FDS2236 NEW! Hydraulic Pump Assembly w/ Relief Valve fits: 8N, Replaces: 8N605A ABC1809 $42.50 ABC1812 $29.95 Hydraulic pump parts Order # FDS153 Price Description / Application $249.95 Basic Hydraulic Pump Rebuild Kit Fits: 9N, 2N, 8N (1939-52) Contains (1) Base Gasket, Replaces: 9N611; (2) Chamber Repair Kit, Repairs 9N621, 9N622; (2) Cam Block, Replaces: 9N617A; (2) Piston, Replaces: 9N615; (1) PTO Shaft Bushing, Replaces: 9N649A; (1) Safety Valve, Replaces: 8N638; (1) Sump Plug Gasket, Replaces: 8N7011; (2) Side Gasket, Replaces: 9N613; (1) PTO Shaft Gasket, Replaces: C5NN747A; (2) Side Plate Gasket, Replaces: 9N4131 Hydraulic Lift Lever Cover Friction Disc Fits: 9N thru 7700 series (1939 & up) Replaces: C5NN518B, 83977032 (3" O.D., 7/16" center hole) FDS365 $21.15 Hydraulic Pump Control Valve Assembly Fits: 9N, 2N (1939-47), Replaces: 9N640 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Hydraulic Pump Complete Valve Chamber Assembly Fits: 9N, 2N, 8N ABC549 Replaces: 9N622 ABC551 Replaces: 9N621 ABC1820 ABC1814 Order # Price $30.75 $45.65 Front Hydraulic Pump Drive Hub Adaptor fits: Some 9N, 2N, 8N when equipped w/ ABC021 crankshaft pulley Replaces: 192161 (3-3/8" O.D., 2-3/8" c.c. across bolt holes, 3/4" spline I.D., 6 splines. (4) 1/4" mounting holes, 1.005" thick) NOTE: Measure old pulley bolt spacing before ordering. Use with ABC1820 shaft. Front Hydraulic Pump Drive Hub Adaptor fits: NAA, 600, 800; (2000, 4000 4-cyl. series), Replaces: 290421, 500934 (10 splines, 1" I.D., 2-3/4" c.c. across bolt holes, 4" o/a dia., 7/16" bolt holes) USA made NOTE: For shaft use ABC1814. Front Hydraulic Pump Drive Shaft Fits: Some 9N, 2N, 8N, Replaces: 194354 (13" long, 3/4" O.D., 1 end is 6 spline and the other end is 0.187 keyway) USA made NOTE: Measure before ordering. Use w/ ABC1809, ABC021. Description / Application FDS074 $295.00 Hydraulic Piston Type Pump Manifold FDS3017 $58.50 (Lines) (Piston type pump a.k.a. round pump) fits: NAA, Jubilee, Golden Jubilee (1953-54), Replaces: NAA876A USA made Hydraulic Vane to Piston Pump Changeover Plate fits: NAA, Jubilee, Golden Jubilee, Serviceable for NAA876A NOTE: Includes (4) o-rings. See website for instructions. Vane pump parts - USA made Order # Price FDS239 $380.00 FDS240 $380.00 BACK IN STOCK! Hydraulic Pump Vane $624.95 Fits: 501, 600, 700, 800, 900, 1801, 2000, 4000, 4-cyl. series (1954-64) Hydraulic Lift Housing Gasket only Fits: 9N, 2N, 8N (1939-52) Replaces: 9N502 Description / Application Hydraulic Pump Safety Valve Assembly Fits: 9N, 2N, 8N (1939-52); NAA, Jubilee Replaces: 8N638, NAA984F Gasket only Hydraulic Lift Lever Control Friction Plate fits: 9N, 2N, 8N, Jubilee, NAA, 501, 600, 700, 800, 900, 1801, 2000, 4000 4-cyl. (1939-64), Replaces: 2N516A, 2N516A2 Hydraulic Lift Oil Level / Dipstick Fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: NAA927C Application Kits O-Ring (For ABC314) ABC316 Order # ABC549 (LH) Hydraulic lift cover repair gasket kits ABC089 Hydraulic Lift Piston fits: NAA, Jubilee (1953-54), Replaces: NAA530B; Optional for 9N, 2N, 8N when used w/ O-ring (NAA533A), back-up washer (NAA473A) USA made Description / Application Hydraulic Lift Oil Level / Dipstick Fits: 600, 700, 800, 900, 1811, 2000 4-cyl., 4000 4-cyl. series (1954-64) except Grove & Offsets, Replaces: NCA927BC Description / Application BACK IN STOCK! Hydraulic Pump Vane Rotor Kit fits: Some NAA, Jubilee, Golden Jubilee (1953-54) (All using square vane style hydraulic pump w/ 5/8" wide vanes), Replaces: CPN981A (5/8" wide vanes) Rotor Kit fits: Some 600, 700, 800, 900 (All to SN: 66849 and using square vane pump w/ 3/4" wide vanes), Replaces: CPN972C (3/4" wide vanes) Piston pump, parts The following piston pump parts fit: Some NAA, Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000, 4-cyl. series (thru 1964) Order # FDS1919 Price Description / Application $849.95 Piston Type Hydraulic Pump Replaces: NAA600D, NCA600C, NCA600F USA made NOTE: FDS1919 can replace your vane style pump when using piston style hydraulic manifold lines. FDS1262 $187.25 Hydraulic Piston Type Pump Gear ABC156 $52.95 Front Hydraulic Pump Drive Shaft Fits: NAA, 600, 800, 2000 4-cyl., 4000 4-cyl. series (1953-64), Replaces: 195454 (9-3/8" length, pulley end = 1" O.D. x 10 splines, pump end = 3/4" O.D. w/ 3/16" x 3/4" keyway) NOTE: Measure before ordering. Use w/ ABC1812. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Housing (For NCA600C or NCA600F pump), Replaces: NCA905C USA made NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Hydraulic Piston Type Pump Repair Kit w/ Plate Assy & Seal, Replaces: CCPN600A, CCPN600B (Services 1953 thru 1964 4-cyl. gas, diesel models using piston type pump NCA600C & NCA600F) NOTE: Piston type pump has replaced vane type pump in many early models. Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Piston pump, parts continue on next page 197 Chassis parts ABC315 Price $14.85 Piston pump manifold (lines), part Ford Ford ABC314 $13.40 Order # FDS416 Hydraulic pump parts cont... Piston pump, parts cont... Piston pump, parts cont... The following piston pump parts fit: Some NAA, Jubilee, 501, The following piston pump parts fit: Some NAA, Jubilee, 501, 600, 700, 800, 900 series, 1801, 2000, 4000, 4-cyl. series (thru 600, 700, 800, 900 series, 1801, 2000, 4000, 4-cyl. series (thru 1964) 1964) Order # Price FDS2855 $64.95 FDS2857 $10.26 Chassis parts FDS1587 FDS3266 FDS3270 FDS437 FDS439 198 $78.45 $11.25 $19.85 $17.50 $8.55 $5.80 Hydraulic Piston Pump Valve Seat Installation Tool also fits: 6000 series using piston type hydraulic pump Replaces: FNH01305 USA made Price FDS334 $37.50 ABC201 $11.65 $8.50 O-Ring & Gasket Kit USA made NOTE: Kit includes: (2) - Main pump body gaskets; (1) - Pump mount gaskets; (1) - Pump body o-ring; (4) - Pump manifold o-ring; (1) - tach drive gasket. Hydraulic Piston Type Pump Shaft Replaces: NCA966E USA made NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Tachometer (Proof Meter) Drive Bolt (For Vane & piston type hydraulic pumps) Fits: NAA thru 4000 4-cyl. (1953-64) Replaces: EAF951A NEW! Tachometer (Proof Meter) Drive Adapter Shaft, Replaces: EAF17375D (1.672" o/a length, 0.435" O.D.) USA made NOTE: Fits both vane & piston pumps. Hydraulic Piston Type Pump Shaft Cup (For NCA600C or NCA600F pump) Replaces: 8A1202B, D5NN1202A NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Needle Bearing Assembly (For Piston pump drive gear housing) Replaces: NCA881A, 36433 ABC566 ABC140 $18.50 $7.85 Hydraulic Piston Pump Shaft Seal Replaces: C5NN851A, Will replace NCA851A, D8NN851AA (1.000" I.D., 2.004" O.D., 0.531" W) Conversion PTO assys. (1-3/8") ABC1501 $9.95 FDS015 $99.95 NOTE: The PTO Assemblies replace & convert 1-1/8" shaft to 1-3/8" spline. PTO shaft is assembled with oil seal, bearing, housing, cap, bearing retainer ring & gasket. Order # Price FDS216 $164.95 FDS217 $166.20 FDS218 $139.95 NEW! Tachometer (Proof Meter) Drive Bushing, Replaces: EAF17381A (5/8" - 18 thread, 1.275" o/a length) NOTE: Fits both vane & piston pumps. Hydraulic Piston Type Pump Shaft Bearing (For NCA600C or NCA600F pump), Replaces: 8A-1201C, D5NN1201A NOTE: Will fit pumps w/ tapered bearing style pump shaft not roller bearing style pump shafts (NAA600C & NCA600E). Description / Application Hydraulic Piston Type Pump Main Drive Gear, Replaces: C3NN908A USA made ABC200 Price $10.75 Application Fits: 9N, 2N, 8N (1939-52) Replaces: 9N70038 (30-7/8" long) MIS118 MIS138 $48.50 $48.50 PTO parts Order # Price ABC085 $4.50 Description / Application PTO Knob fits: Major Diesel, Power Major, Super Major, Replaces: EBB7213 (3/8"-24 NF) $1.00 PTO Gasket (For 1-1/8" & 1-3/8" PTO) Fits: All Ford models (1939-64) except Majors; 2000, 3000 (both w/ 4 speed transmission) (1965 - 12/1970) Replaces: C5NN747A USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm PTO Cap (For 1-1/8" PTO) fits: 9N, 2N, 8N, NAA, Jubilee, 600, 700, 800, 900 (up to 1957), Replaces: NCA726A (3-1/2" o/a length, 2-5/8" thread) NOTE: Cast iron. Original style. PTO Oil Seal fits: Ford models (1939 & up), 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 3000 series w/ 4, 5, 6, 7, 8 speed transmission & Selecto speed, 3550, 4000, 2600, 3600, 4100, 4600, 2610, 3610, 4110, 4610, Replaces: 9N703B, 83944079 (1.500" I.D., 2.450" O.D., 0.650" wide) NOTE: For 1-1/8" & 1-3/8" PTO shafts. Seal may be narrower than original, but works fine. PTO Input Shaft Seal fits: 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710, 8000, 8600, 8700, 9000, 9600, 9700 (All w/ 7 or 8 speed transmission) Replaces: C5NN799A (1.125" I.D., 1.565" O.D., 0.250" wide) Price PTO Over-Running Clutch (1-1/8 Female) Fits: Tractors up to 75 horsepower Replaces: Hub City C670F (1-1/8" - 6 x 1-3/8", 6 spline) PTO Over-Running Clutch (1-3/8" Female & Male) Fits: Tractors up to 75 horsepower Replaces: Hub City C660F (1-3/8" - 6 x 1-3/8", 6 spline) NOTE: Hardware is priced and sold individually. MFS1584 Price $1.95 Description / Application Description / Application $0.99 Front Wheel Lug Nut Serviceable for 9N TW30 (1939 & up), Replaces: C5NN1012B (1/2" - 20 UNF, 13/16" hex head) USA made FDS368 $6.75 Front Wheel Lug Nut fits: 9N, 2N (193947), Replaces: 9N1012 (1/2" - 20 UNF, 11/16" hex head) USA made NOTE: 10 used per tractor; Sold individually. FDS288 $4.80 Front Wheel Stud Assembly w/ Nut Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (1947-56) (.559" shoulder dia.) NOTE: Stud (1/2" x 20 UNF) is exact of original. FDS286 $4.50 Front Wheel Stud only fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900 series (1939-56), Replaces: C5NN1107E NOTE: Stud (1/2" x 20 UNF) is exact of original. ABC268 $1.50 Front Wheel Stud only fits: 501 thru 981, 2000 thru TW30, Dexta (All w/ 2 wheel drive & regular front hub) (1957 & up) Replaces: C5NN1107F (1/2" - 20 UNF x 1-3/4" w/ serrated shoulder, 1.747" useable length) NOTE: 6 used per rim; Sold individually. ABC254 $20.50 Front Wheel Clamp Lock Nut (For Axle Shaft & Front Wheel) Fits: 9N thru 6000 (3/4"-16 UNF thread) NOTE: No re-threading necessary on worn shafts. Check size before ordering. Front wheel hub, parts Order # Price FDS285 $60.75 Description / Application Front Wheel Hub fits: 8N, NAA, Jubilee Replaces: 8N1104, NCA1104C FDS295 $29.50 Front Wheel Bearing Kit fits: 9N, 2N, 8N, NAA, Jubilee (1939-54) Replaces: CBPN1200A (1.189" inner bearing I.D.) NOTE: Kit includes: (2) bearing cones, (2) bearing cups & (1) oil seal. 2 used per tractor; Sold individually. Fits hub 8N1104. FDS1787 $19.95 Front Wheel Bearing Kit fits the following w/ NCA1104A hub, (1954 mid 1957) (up to SN: 137818): 600, 700, 800, 900 series, Replaces: CBPN1200B (1.250" inner bearing I.D.) NOTE: 2 used per tractor; Sold individually. Front wheel hardware Order # ABC313 PTO Shaft Cover Cap fits: 9N thru 4610 (1939-83); Will not fit 2910, 3910 Replaces: 310088 Order # FDS287 PTO Shifter Support Housing fits: 600, 800, 900, 2000, 4000 4-cyl. series (thru 1964) w/ 5 speed transmission, Replaces: NDA770B Fits: NAA, Jubilee (1953-54) Replaces: NAA70038 (30-3/16" long) Fits: 600, 700, 800, 900 series (1954-64) except Select-O-Speed models Replaces: NCA70038, 310084 (32-11/16" long) NOTE: On some apps. may have to press thrust collar forward 1/4" to clear trans. seal. Description / Application Front Wheel Lug Nut fits: Some 8N w/ 1-1/16" hex lug nut & 19" rim Replaces: S9512A (1/2"-20 UNF, 1-1/16" hex head) NOTE: 12 used per tractor; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Front wheel hub, parts continue on next page 199 Chassis parts FDS333 Hydraulic Piston Pump Valve Seat Removal Tool also fits 6000 series using piston type hydraulic pump Replaces: FNH01306 USA made NOTE: See website for additional applications. Order # Order # ABC086 Ford Ford FDS438 $32.50 Description / Application Front wheel hardware cont... PTO parts cont... Front wheel hub, parts cont... Order # FDS1791 $4.95 $10.95 Order # Front Wheel Bearing Kit fits the following w/ NCA1104B hub, 1957- 64 w/ regular axle, NOT H.D. axle: 501 thru 4000, Replaces: CBPN1200C (1.781" O.D. outer race) USA made NOTE: 2 used per tractor; Sold individually. Front Wheel Bearing Seal fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (1939-64) Replaces: NCA1190A, 9N1190B (1.985" I.D., 2.684" O.D., 0.322" wide) NOTE: 2 used per tractor; Sold individually. FDS220 Price $131.50 Front Wheel (5 Bolt) w/ Large 9-5/8" Pilot Hole fits: 9N, 2N (1939-47) Replaces: 9N1015A (3" x 19") FDS221 $115.95 Front Wheel (6 Bolt) w/ Small Center Fits: 8N (1947-52) Replaces: 8N1015A, C5NN1015A (3" x 19") Front Hub Cap only fits: 9N, 2N, 8N, NAA, 501, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series, Dexta, Super Dexta (1939-64) (All w/ regular front axle not heavy duty axle), Replaces: 2N1139B, 957E1139 (2"-24 thread size, 1.670" tall) NOTE: Stamped steel. Exact of original. WHS022 $72.50 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 8N thru 7910 series Replaces: 8N1015D, 82006575, 87389515 (4.5" x 16", Pilot hole = 4.625", 6" bolt circle, 4" back spacing) USA made NOTE: For 5:50 x 6:00 x 16" tires. WHS042 Front Wheel (6 Lug) fits: Some 3230 - 7710 & others, Replaces: 82006576, C5NN1007D (6" x 15", 6" bolt circle, 4.625" pilot hole, 4-3/4" back spacing) USA made WHS070 the inside (bead to bead) not outside to outside. See pg. 344B. FDS071 $52.15 WHS043 Front Rim (Blank) Fits: 9N, 2N, 8N (1939-52) (3" x 19"; 17-3/8" I.D.) USA made NOTE: Remove center from old rim & weld into new blank rim. 200 Price Description / Size WHS047 $93.50 WHS048 $105.75 Triple rib, 4 ply, Tire only (6.00 x 16") WHS049 $110.95 Triple rib, 6 ply, Tire only (6.50 x 16") WHS050 $15.25 Tube only (For 5.50, 6.00, 6.50 x 16" Tires) FDS089 $68.95 Multi rib, 4 ply, Tire (4 x 19") FDS056TU $15.75 Tube only (For FDS089 Tire) WHS060 $37.95 Rear Tube only (For 7.50, 8.3, 9.5 x 24" Tires) WHS059 $53.75 Rear Tube only (For 11.2, 12.4 x 24" Tires) WHS058 $56.55 Rear Tube only (For 11.2, 12.4 x 28" Tires) WHS061 $80.25 Rear Tube only (For 13.6, 14.9 x 28" Tires) WHS062 $56.95 Rear Tube only (For 9.5 x 32" Tires) WHS063 $64.95 Rear Tube only (For 11.2, 12.4 x 34" & 36" Tires) WHS064 $65.25 Rear Tube only (For 11.2, 12.4 x 38" Tires) WHS2513 $89.95 Rear Tube only (For 12.00 x 38", 13.00 x 38", 13.6 x 38", 14.00 x 38", 14.9 x 38", 15.5 x 38" tires) Order # Price FDS1201 (Stud) $7.50 EACH FDS1211 (Nut) $1.30 EACH Order # Triple rib, 6 ply, Tire only (5.50 x 16") Price Description / Application ABC531 $5.15 Rear Tire Inner Tube Valve (Air / Water Valve) (New Style) fits: Tractor tubes w/ Internal threads NOTE: Sold individually. ABC384 $5.15 Rear Tire Inner Tube Valve (Air / Water Valve) (Old style) fits: Tractor tubes w/ External threads NOTE: Sold individually. ABC385 $1.50 Brass Nut (For Rear Tire Inner Tube Valve) NOTE: Sold individually. Rear rim hardware cont... Description / Application Fits: 9N, 2N (1939-47) FDS1201 Replaces: 9N1117 (5/8"-18 NF thread, 1.875" o/a length) FDS1211 Replaces: 33806S7, 81871950 (5/8"-18 thread) USA made NOTE: 12 required per tractor; Sold individually. Order # MIS121 Price $0.50 Description / Application Flat Washer only (For MIS063) (5/8" I.D.) NOTE: Can also be used behind the lug nut on 9N & 2N. 6 needed per wheel; Sold individually. Rear rims / wheels - USA made NOTE: To determine the width of Rims / Wheels: Measure Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Ford models Replaces: 820050054, 86402377, D6NN1007B (8" x 15", 6" bolt circle, 4.625" pilot, 4-3/4" back spacing) USA made NOTE: To determine the width of Rims / Wheels: Measure Description / Application Order # $86.45 Front wheels / rims Price Tubes are for BIAS ply tires only, not for radial tires. Also not for recreational use. Need a tire or tube that is not listed? Call our technical service department. Tires, tubes, valves, nut are sold individually. Rear rim hardware $65.60 What is back spacing? To determine back spacing lay your wheel flat on the ground with the back of the wheel facing up. Lay a straight edge across the wheel & measure the distance from the back side of the mounting surface to the straight edge. (I.E. The wheel pictured has a back spacing of 3-5/8"). Order # Tires, tubes, valves Description / Application Chassis parts Chassis parts ABC553 $20.95 Description / Application $82.75 Front Wheel (6 Lug) w/ (4) Wheel Weight Holes fits: Some 2310 - 9700 & others Replaces: 82005056, C5NN1007A (6" x 16", Pilot hole = 4.625", 6" bolt circle, 4-3/4" back spacing) USA made STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS394 (Stud) ABC386 (Nut) MIS063 $2.20 EACH $1.70 EACH $3.75 Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 1801, 2000, 2600, 2610, 2810, 2910, 3000, 3610, 3910, 4000 4-cyl. FDS394 Replaces: 312696 (5/8"-18 thread x 1-5/8) USA made ABC386 Replaces: 8N1134 (5/8"-18 thread) USA made NOTE: 16 required per tractor; Sold individually. For 2600 & up check thread size. the inside (bead to bead) not outside to outside. See pg. 344B. Order # Price WHS016 (9" x 28") $148.05 WHS004 (10" x 28") $157.00 WHS012 (11" x 28") WHS013 (12" x 28") Rear Rim Bolt Assembly w/ Nut Fits: 28" Rear Rims - WHS004, WHS012, WHS013, WHS016 applications (5/8 x 18 x 2-1/2" NF Carriage bolt) USA made NOTE: For tractors w/ stamped steel center dishes. 6 used per rim; Sold individually. STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Ford Ford ABC1310 Price Front wheels / rims cont... Description / Application Rear Rim (6 Loops) Fits: Some 9N thru 2000 series & others $175.20 WHS016 Replaces: NCA1020C, D9NN1050BA $178.95 WHS004 Replaces: NCA1020B, CONN1050F WHS012 Replaces: C5NN1050E WHS013 Replaces: D9NN1050EA NOTE: Back spacing on loops = 3-1/2" & 7-3/4". Rear rims / wheels continue on next page 201 Rear wheel flange nut Rear rims / wheels - USA made cont... Fits: 8N, NAA, Jubilee, 501, 600, 700, 800, 900, 2000, 4000 4-cyl. series (1947-64); 3000 (1965 & up), Replaces: 8N1132A2 (1-1/16" hex, 5/8"-18 UNF x 2.650) NOTE: To determine the width of Rims / Wheels: Measure the inside (bead to bead) not outside to outside. See pg. 344B. Order # Price WHS1613 $235.95 Description / Application Flat Base Rear Rim (Blank Center) (For Stamped Steel 9 Bolt Pattern Rims) fits: Ford models (10" x 38") NOTE: Bare finish. Customer must reuse old center. Must weld or rivet. Description Mounting wedge Fits: 8N, NAA, Jubilee, 501; 600, 700, 800, 900, 2000, 3000 w/ conventional 6-loop rims not spin out rims Description WHS007 (12" x 26") $435.00 ACS028 (11" x 28") $435.00 ACS026 (12" x 28") WHS008 (13" x 28") MIS108 MIS109 Description / Application Rear Spinout Rim (4 Rails) Fits: Ford models (1965 & up) WHS007 Replaces: C5NN1050H ACS028 Replaces: C5NN1050H USA made NOTE: These are not PAD style rims. 3-point hitch parts $450.00 Rear Spinout Rim (4 Rails) Fits: Some 2000 3-cyl. - 4110 series (1965 & up), others Replaces: C5NN1050J USA made $468.25 $18.75 $14.99 202 $8.95 Order # Price FDS023 $23.50 FDS346 $39.45 FDS159 Rear Spinout Rim (4 Rails) Fits: Some 2000 3-cyl. - 4110 series USA made NOTE: Stop holes are angled, Rails are drilled for both style stops (1 rail for MIS109 & 1 rail for MIS108). Rear Spinout Rim Stop (For 90° Drilled Rim Rail) fits: Ford models (1965 & up) Replaces: E5NN1057BA USA made NOTE: Will not fit the rims that we sell. Rear Spinout Rim Stop (Parallel Drilled) Fits: Ford models (1965 & up) Replaces: C0NN1057A NOTE: Use MIS109 for the listed spinout rims. MIS110 Price Mounting Wedge (For Rear 3-Piece Weight)....... FDS150..........$8.50 NOTE: 6 needed per wheel; Sold individually. Top-Link Category 2 Adjustable w/ forged ends & 1" hole (16-3/4" tube length) Top-Link Bracket (Hydraulic Lift Rocker) Fits: 8N, NAA, Jubilee, 600, 800, 2000, 4000 4-cyl. (1947-64), Replaces: NCA535A NOTE: Drilled for a 1" pivot pin. Measure pivot pin before ordering. Category 1 3-Point Top Link Pin (3/4" O.D., 2-3/4" usable length, 4-5/8" o/a length) ABC1427 $3.25 Category 1 3-Point Top Link Pin (3/4" O.D., 4-3/4" usable length, 6-1/2" o/a length) ABC1429 $4.25 Category 2 3-Point Top Link Pin (1" O.D., 4-1/4" usable length, 6" o/a length) MIS119 $0.50 $78.50 FDS367 $24.75 Fork (For FDS028) fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta Replaces: 9N585A (9-3/4" o/a length, 3/4" UNC thread, 1/2" between ears) FDS219 $52.75 LH Leveling Rod fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta Replaces: 9N564B (19" c.c. pin holes) FDS392 $97.65 FDS350 $3.75 Top-Link Category 1 Adjustable w/ forged ends & 3/4" hole (16" tube length) ABC1431 $1.90 FDS475 Stop Bolt (For Rear Spinout Rim Stops) Replaces: C0NN1058A, 81811263 USA made NOTE: Sold individually. $69.95 3-Point Leveling Box Assembly fits: 9N, 2N, 8N, NAA, Jubilee, Dexta, Super Dexta Replaces: 8N577A (Closed length = 17-1/2" - top pin to bottom pin) Description / Application 3-Point Lynch Pin fits: Ford models equipped w/ a 3-point hitch using a .420" dia. pin, Replaces: 87299410 (1-5/8" usable length) BACK IN STOCK! Outer Hydraulic Lift Rockshaft Arm fits: 9N thru Jubilee; Serviceable for 501 thru 4000 4-cyl. (1939-64), Replaces: 9N543B (1.80" I.D., 37 splines) STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm FDS206 $57.95 FDS383 (LH) $97.10 FDS386 (RH) $97.10 FDS2059 FDS465 FDS462 $1.45 $28.95 $25.15 Description / Application Order # Price $129.90 Swinging Drawbar Assembly w/ FDS302 $163.00 Hanger/Bracket & Clevis Assembly Fits: 9N, 2N, 8N, NAA, Jubilee, 600, 601, 2000 4-cyl. series (thru 64) except Row Crop NOTE: Verify that 9N’s rear end housing has (4) tapped holes under the rear end housing before ordering. Mounting bolts sold separately, order ABC2271. Swinging Drawbar Assembly w/ Hanger/Bracket & Clevis Assembly Fits: 800, 1801, 4000 series 4-cyl. (thru 64) except Row Crop & Grove NOTE: Mounting bolts sold separate, order # ABC2271. 3-Point Leveling Box Assembly Fits: 600, 800, 1801, 2000 4-cyl, 4000 4-cyl. Replaces: NCA577A, NCA585B (21-3/4" to 25" total adjustment) 3-Point Leveling Box Pin (For FDS028, FDS219, FDS392) fits: 9N, 2N, 8N, NAA, Jubilee, 541, 600, 700, 800, 900, 1801, 2000 4-cyl., 4000 4-cyl. series, Dexta, Super Dexta (thru 64), Replaces: 9N595 (2-3/4" useable length x 5/8" dia.) USA made 3-Point Lower Lift Arm fits: 9N, 2N, 8N, NAA, Jubilee (1939-54), Replaces: 9N555, 9N556 (Lower lift arm w/ forged balljoint ends, Category 1 accommodates 7/8" drawbar or lower link pins, 32" hole centers) NOTE: Red primer. 3-Point Lower Lift Arm fits: 501, 600, 700, 800, 900, 1801, 2000 (3 & 4-cyl.), (4000 4-cyl. series) (1954 & up) FDS383 Replaces: D0NN555C FDS386 Replaces: D0NN555D (Category 1 - accommodates 7/8" drawbar or lower link pins, 31-5/8" c.c. ball) NOTE: Must drill hole for sway chain. Lower 3-Point Pin Support Plate Gasket Fits: 9N SN: 6019 & up, 2N (mid 1939 - 47) Replaces: 9N523B USA made NOTE: Mounts under axle housing. 2 used per tractor; Sold individually. 3-Point Lower Lift Arm Support Pin w/ Nut, Washer & Cotter Key Fits: 9N, 2N (1939-47), Replaces: 9N563 Description / Application FDS208 FDS306 $55.00 Swinging Drawbar fits: Same as FDS208, FDS302, Replaces: C0NN805F, 86531346 FDS303 $52.65 Hanger / Bracket fits: Same as FDS208 Replaces: NCA809A FDS304 $59.50 Hanger / Bracket fits: Same as FDS302 Replaces: NDA809A ABC435 $55.65 Clevis w/ Pin fits: Same as FDS208, FDS302, Replaces: NCA803B FDS305 $4.90 Clevis Pin w/ Lynch Pin fits: Same as FDS208, FDS302, Replaces: 8N804 NOTE: Only fits aftermarket bracket. ABC2271 3-Point Lower Lift Arm Support Pin Fits: 8N, NAA, 501, 600, 700, 800, 900, 1801, 2000 3 & 4-cyl., 3000, 3600, 4000 3 & 4-cyl., 4600 (1947-81) (All w/out differential lock), Replaces: NCA563C USA made STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com $8.95 Swinging Drawbar Bolt Kit Fits: 9N thru 4000 series (4-cyl.) (1939-64) NOTE: Includes 8 bolts & lock washers. Fits FDS208 & FDS302 Assys. Drawbars, parts continue on next page 203 Chassis parts Chassis parts Price Order # Price $79.95 Drawbars, parts Ford Ford NOTE: Stop holes are angled. Order # FDS028 Price Rear Wheel Flange Nut........................................... FDS118..........$11.50 NOTE: Used to add pie weight plate or to "Direct Dual." Rear spinout rims, parts Order # Order # 3-point hitch parts cont... Drawbars, parts cont... Order # Price Description / Application ABC2010 $24.00 Adjustable Stabilizer Bar (For tractors w/ Category I 3-point) Adjustable from 271/2" to 37" length, 23" center tube length, 7/8" threaded ends, 7/8" pin holes NOTE: Adjustable ends for desired length. Normally 2 used per tractor; Sold individually. FDS211 $46.95 Stabilizer Kit fits: 9N, 2N, 8N, NAA, Jubilee, 600, 800, 2000 3-cyl. & 4-cyl., 3000, 4000 4-cyl. series Category 1 NOTE: Primed red. Flat bars not turnbuckles. Kit includes (2) arms, (2) brackets, pins. Standard Drawbar Category 1 Fits: Ford models Replaces: 9N5182A (1" x 2-1/2" x 26", 7/8" pin size) ABC2357 Description ABC302 FDS274 $7.75 $47.75 Price White Deluxe Umbrella w/ Brackets ..... ABC2362.... $192.80 $29.99 $2.15 Order # Blue Deluxe Umbrella w/ Brackets ....... ABC2366.... $192.80 Red Deluxe Umbrella w/ Brackets ........ ABC2357.... $192.80 Drawbar Lock Category 1 (For FDS022) Replaces: 9N5182L ABC1433 ABC2362 3-Point Lift Arm Category 2 to a Category 1 3-Point Hitch Reducer Bushing Fits: Ford models w/ a Category 2, 3-point hitch switching to a Category 1, 3-point hitch (1-1/8" O.D., 7/8" I.D., 1-3/8" o/a length) Eyelet Assembly Kit w/ Nut & Lock Washer (For Sway Chain) Fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, Dexta, Super Dexta, 1801, 2000, 3000, 3600, 3610, 4000 4-cyl. series Replaces: NCB660A NOTE: Kit includes: Eyelet assembly, nut & lock washer. Drawbar Check Chain Kit fits: 9N, 2N, 8N, NAA, Jubilee, 501, 600, 700, 800, 900, Dexta, Super Dexta, 1801, 2000, 2600, 2610, 3000, 3600, 3610, 4000 4-cyl. series NOTE: Kit includes: RH / LH anchors, (2) eyelets, (2) chains, (4) clevis w/ pins & hardware From a satisfied customer! “I just talked with Dennis in technical assistance, and I want to tell you that his help was superb. Not only did he help me with trying to determine what was wrong with my pro, he added critical and practical information for a “newbie” so that my working experience with the 8N tractor is a safe and pleasant one. Thank you Dennis for your excellent help and added comments for my new venture into hill mowing and a more pleasurable retirement.” - Andy Howell Tips on applying our decals All decals are mylar unless otherwise noted. Have the pitted area filled, sanded smooth and painted. Paint must be completely dry prior to installation (usually 3 - 4 weeks). Wash area with soap & water (new paint included) on which decal is to be placed. For mylar decals (film between lettering): Trim to border of design where possible prior to removing white backing paper. Lightly spray the area with window cleaner (do not use window cleaner in aerosol can). Peel white backing paper from decal and place in position. Squeegee window cleaner from under decal beginning in center and working outward. If air bubbles occur, puncture with pin & smooth down. Please note: These decals have been printed on a tough mylar film using mylar ink. A pressure sensitive adhesive has been employed on the back of the mylar to insure good adhesion to any clean, hard surface. NO REFUNDS on mylar decals if applied to surface and / or if damaged. DEC292 204 STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm Order # DEC292 DEC232 DEC442 Price $3.00 $26.50 $37.50 Application Ford Script decal (1-Piece Vinyl die cut) (1-3/4" tall x 7" long) 10-Piece Complete warning & misc. decals, including hood and fender decals for 9N, 2N, 8N (1939-52) 9-Piece Complete Set w/ decal placement instructions For: NAA, Jubilee (1953-54) Order # Price Application DEC295 $25.00 801 Powermaster DEC363 $30.00 801 Select-O-Speed DEC391 $29.25 841 Diesel DEC300 $25.00 841 Powermaster DEC337 $13.50 850 DEC297 $25.00 851 Powermaster DEC346 $13.50 860 (1954-57) DEC393 $29.25 861 Diesel DEC360 $25.00 861 Powermaster DEC365 $30.00 871 Select-O-Speed DEC388 $25.00 501 Offset Workmaster DEC404 $30.00 881 Select-O-Speed DEC362 $25.00 541 Offset Workmaster DEC348 $25.00 901 Powermaster DEC332 $13.50 600 DEC342 $13.50 960 DEC443 $48.50 600 (1954-57) NOTE: Does not include Powermaster or Workmaster decal. DEC361 $25.00 961 Powermaster DEC364 $30.00 971 Select-O-Speed DEC396 $30.00 981 Select-O-Speed DEC399 $29.25 961 Diesel DEC429 $25.00 2000 (before 1965) DEC193 $31.50 2000 (1965-68) 3-cyl. DEC197 $34.95 2000 (1968 & up) 3-cyl. DEC201 $31.25 2600 (1968 & up) DEC194 $31.25 3000 (up to 1968) DEC198 $29.25 3000 (1968 & up) DEC430 $25.00 4000 (before 1965) DEC195 $32.75 4000 (1965-68) 3-cyl. DEC199 $29.25 4000 (1968 & up) DEC451 $9.20 Transmission Shift Pattern decal (1-piece) Fits: 2000, 3000, 4000 series (1965 & up); Industrials: 230A - 540A w/ 8 speed transmission & Live PTO Replaces: C5NN7B292, D3NN7B292B (3-15/16" x 5-1/4") DEC196 $28.50 5000 (up to 1968) DEC200 $28.75 5000 (1968 & up) DEC211 $53.00 7000 DEC445 $58.50 601 series (1958-62) NOTE: Includes Workmaster decals. DEC338 $25.00 601 Workmaster DEC333 $13.50 640 DEC299 $25.00 641 Workmaster DEC334 $13.50 650 DEC344 $13.50 660 (1954-57) DEC405 $29.25 661 Workmaster DEC389 $25.00 661 Dsl. Select-O-Speed DEC408 $30.00 671 Select-O-Speed DEC347 $13.50 740 (1954-57) DEC437 $30.00 741 Workmaster DEC410 $25.00 771 Select-O-Speed DEC444 $48.50 800 (1954-57) NOTE: Does not include Powermaster or Workmaster decal. DEC335 $13.50 800 DEC446 $59.50 801 - 861 series (1958-62) NOTE: Includes Powermaster decals. DEC332 DEC445 STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com DEC393 Miscellaneous Chassis parts FDS022 $64.50 ABC2366 Four oil-tempered spring steel bows are locked into place with individual spring clips, providing ease of operation and a rigid framework for the cover. Frame constructed of tubular steel. All metal parts, including frame and mounting brackets, zinc plated for rust resistance and lasting appearance. 54" square cover is made of durable polyester material. Each corner is double reinforced and has heavy steel grommets. Complete with universal mounting bracket. Can be mounted on side of fender, rear end / axle housing, foot platform. All decals are USA made. Ford Ford FDS024 Mylar decals Deluxe tractor umbrellas DEC194 205 Manuals, videos Operator / service manual reprints cont... Build your "how-to" library with us. Reprint manuals are a must for your classic Ford. View tutorials and most requested repair videos at SteinerTractor.TV I & T Shop Service™ manuals - Printed in USA An I & T Shop Service™ Manual tells you how to take a tractor apart, how to fix it and how to put it back together again. These are authentic manuals that deal with repairs in the language of a mechanic with an easy to use format. They include valuable information as to specifications, torques, etc. illustrated by exploded views and photos. If you are in serious repairs or restoration, you need an I & T Shop Service™ Manual. It will offer many short cuts and save you time! Application FO4 $31.95 9N, 2N, 8N NOTE: Includes electrical wiring diagram. FO19 $31.95 NAA FO20 $31.95 Series 501, 600, 601, 700, 701, 800, 801, 900, 901, 1801, 2000 4-cyl., 4000 4-cyl. NOTE: Includes electrical wiring diagram. FO31 $31.95 Series 2000 3-cyl., 3000 3-cyl., 4000 3-cyl. (Covers models prior to 1975) NOTE: Includes electrical wiring diagram. FO42 $31.95 Series 5000, 5600, 5610, 6600, 6610, 6700, 6710, 7000, 7600, 7610, 7700, 7710 NOTE: Includes electrical wiring diagram. FO201 $34.95 Ford Collection: Models Fordson Dexta, Fordson Super Dexta, 2000 Super Dexta, New Performance Super Dexta, models Fordson Major diesel (FMD), Fordson Power Major (FPM), Fordson Super Major (FSM) New Performance Fordson Super Major (New FSM), 5000 Super Major, series 6000, Commander 6000, series 1000 & 1600, series 8000, 8600, 8700, 9000, 9600, 9700, TW10, TW20, TW30 Operator manual reprints - Printed in USA An Operator’s Manual (reprints only) sometimes referred to as the Owner’s Manual is the manual that came with the tractor. It is the manual that was given to the ultimate consumer by the manufacturer. It can be compared to the manual you receive in the glove box of a new car. This manual gives the owner-operator instructions, shift patterns, capacities (anti-freeze, crankcase, etc.) and adjustment procedures (brakes, clutch, etc). This is a very useful and valuable tool in operating your tractor. Service manual reprints - Printed in USA A Service Manual Reprint with wiring diagrams tells you how to take the A Parts Manual (reprint only) has exploded views of all parts on the tractor. With numbered pictures giving you great detail on assembly and disassembly. It also gives you a guide, with numbers, for ordering parts, and makes you seem much more informed when talking with a dealer. Many service manuals, after telling you how to disassemble & repair in detail, will simply say "reassemble". If you have your PTO in the wash tank, in pieces, without notes, you have a problem. The parts manual can help you out with an exploded view of the PTO unit, and you can see immediately how it all goes back together. You need a parts manual! tractor apart, how to fix it and how to put it back together again. It is a reprint of the manual that the factory furnished the dealer’s shop service department, and was not sent or given to individual retail customers. It deals BOK065 • $20.00 9N - Jubilee (1939-54) with repairs in the language of a mechanic. Often times it includes valuable information as to specifications, torques, etc. A service manual reprint will offer many short cuts and save you time! Order # Price BOK061 $15.00 9N, 2N (1939-47) (Operator's manual) NOTE: Includes electrical wiring diagram. BOK063 $18.00 9N, 2N (1939-47) (Service manual) NOTE: Includes electrical wiring diagram. REP1446 $18.95 206 Application BOK1313 • $29.95 NAA, 501, 600, 700, 800, 900, 1801 (1953-59) gas, diesel, LP 9N, 2N (Operator's manual) NOTE: This manual explains basic tractor operation, Ferguson system, 21 different Ferguson implements & accessories. STEINER Tractor Parts • Order today! M-F 8 am - 6 pm EST; Sat. 8 am - 12 pm BOK040 $15.00 8N (1947-52) (Operator's manual) NOTE: Includes electrical wiring diagram. BOK064 $15.00 8N (1947-52) (Service manual) NOTE: Has very limited information on engine service. BOK062 $15.00 NAA (1953-54) (Operator's manual) REP1142 $14.75 NAA, Jubilee (Service manual) Engine rebuild videos USA made Application REP1681 $14.95 600 series, 800 series gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's manual) REP1679 $14.95 601 series, 801 series gas, LP w/ 4 or 5 speed transmission (1958-62) (Operator's manual) REP1685 $14.95 700, 740, 900, 950, 960 gas, LP w/ 4 or 5 speed transmission (1954-57) (Operator's manual) REP1683 $14.95 701 series, 901 series gas, LP w/ 4 speed or Select-o speed transmission (Operator's manual) REP1146 600, 601, 700, 701, 800, 801, 900, 901, 1801 series gas, LP, diesel (Service manual) NOTE: Includes electrical wiring diagram. $24.30 REP1369 $14.95 2000 3-cyl., 3000, 4000 3-cyl., 5000 (1965 & up) All Purpose & LCG gas, diesel (Operator's manual) REP1139 Fordson Major (Service manual) $14.75 REP1342 $42.90 Ford/Dearborn Farm Equipment (Beginning in 1939) NOTE: This manual contains almost 900 pages of assembly, operations, part numbers, and maintenance! (Operator's manual) REP2643 $14.95 Char-Lynn Power Steering (Owner's manual) NOTE: Includes installation, operation, maintenance & trouble shooting information on the pump & torque generator. REP087 Sherman Transmission Over-Under, Reversing, Live PTO (Service manual) $34.95 From a satisfied customer! “Lisa, Thank you again for taking care of the issue and for your great communications getting back as fast as you did to my questions. You are an asset to your company and pleasant to deal with as a customer." - Keith NEW! Brake repair video USA made Shows you how to replace the brake shoes, adjust the brakes, & replace seals & gaskets on your Ford tractor. You will learn how to make an inexpensive tool that helps the job go easier. The many useful tips and instructions encourage you to do the same repairs yourself. VID3389D (CD) • $24.95 2N, 8N, 9N, NAA, 600, 700, 800, 900, 2000 4-cyl., 4000 4-cyl. series (1939-64) STEINER Tractor Parts • Call 800-234-3280 or Visit www.SteinerTractor.com Shows how to completely rebuild the tractors' engine. You will see the engine disassembled down to the bare block & then rebuilt step by step is an easy format. VID01D (CD) • $24.95 9N, 2N, 8N VID04D (CD) • $24.95 NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. Tune-up videos USA made Includes rebuilding the carburetor & distributor, oil & filter change, brake adjustment & more! VID02D (CD) • $24.95 9N, 2N, 8N VID05 (VHS) • $19.95 VID05D (CD) • $24.95 NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. Hydraulic repair videos USA made Will help determine what is causing hydraulic problems and shows how to make the necessary repairs or completely rebuild the round, piston type, hydraulic pump. VID03D (CD) • $24.95 9N, 2N, 8N; Ferguson 20, 30 series VID18D (CD) • $24.95 NAA, Jubilee, 600, 700, 800, 900 series, 2000 4-cyl., 4000 4-cyl. 207 Miscellaneous Miscellaneous Price Printed in USA Price Ford Ford Order # Parts manual reprints Order #
Similar documents
Ford 4 - Steiner Tractor Parts
belts..................................................... 156
bolt kit................................................ 169
brackets....................................168, 169
conversion kit...
Ford 4 - Steiner Tractor Parts
bolts.................................................... 157
hold downs....................................... 157
retainer............................................... 157
rod................
Case - Steiner Tractor Parts
riveting tools................................103
springs............................................102
C
Camshaft, parts
bearing & bushing sets............... 72
camshaft......................
Minneapolis Moline - Steiner Tractor Parts
riveting tools.....................................535
spring...................................................535
C
Caps
air cleaner...........................................528
distributo...
Allis Chalmers - Steiner Tractor Parts
mounting kit.........................................31
pulleys..............................................30, 31
Amp gauges................................................22
B
Battery boxes, ...
Four Generations - Steiner Tractor Parts
choke disc...................................197
choke lever................................ 195
B
elbows.........................................196
Battery Boxes....................... 212 ...
Minneapolis Moline - Steiner Tractor Parts
spring.................................................563
Bull pinion shaft seal.......................563
C
Caps
air cleaner................................555, 556
distributor..................
Allis Chalmers - Steiner Tractor Parts
pipe grommet...............................38
Alternators, parts
alternators......................................32
bracket.............................................33
mounting kits.........
1 Allis Chalmers A C Allis Chalmers
bracket kits........................................32
mounting kit.....................................32
pulleys..........................................31, 32
Amp gauges......................
