FL2004(Door Bottoms)Final.id

[email protected]
WWW.PEMKO.COM
 Automatic Door Bottoms – New Patented Low Closing Force Models
 U.S. Patent Number 6,125,584
 Smoother action positive seal mechanism. All Pemko automatic door bottoms consist of
an aluminum case which surrounds a movable drop bar seal. The drop-bar seal is actuated by a
plunger which contacts the jamb as the door is closing, forcing the drop bar seal down against
the floor / threshold. The simple yet practical engineering of the mechanism includes the following
features:
 When the plunger contacts the jamb, the drop bar seal actuates from multiple compression points.
 The plunger requires low “FeatherTouch” closing force to actuate the drop bar seal.
The “L” at the end of all product numbers stands for Low closing force. Pemko automatic
door-bottoms meet pending closing force legislation and codes.
 The drop bar seal actuates on the hinge side first (see below).
 All models (except #420) include patented “tri-finned designed” seals (see photograph right)
which are offered in two materials: soft closed cell sponge neoprene (R) which remains pliable down
to -70°F and PemkoPrene™ thermo-plastic elastomer (PK).
 Compressible PemkoPrene™ (PK) seal conforms well to the floor / threshold surface; the multipoint contact creates a superior seal.
 Most models are now available with nylon brush (NB) seals. The nylon filaments conform extremely
well to irregular surfaces such as carpet, stone and grout lines.
 Especially over uneven surfaces, both PemkoPrene™ (PK) and nylon brush (NB) provide
excellent seals to keep out draft, dust, moisture, insects, fumes, light, and sound.
 All medium duty models are also now available with sponge silicone (S) seals.
 All models (except #430 and #412) are non-handed and reversible. Installation is fast and easy
because disassembly is not required to change handing: simply flip the automatic door bottom, and
you’ve reversed the hand. The clean symmetrical square-shaped case design also provides for even
flush mounting.

 The line includes models which can be mounted to either wood or hollow metal doors.

CONFORMS TO IRREGULAR SURFACES

NON-HANDED AND REVERSIBLE
 End plates are provided for all mounting applications (see illustrations on the next pages).
 All Pemko automatic door bottoms seal up to a 3/4" gap under the door except 420 and residential
models which seal 1/2” maximum.
 Available in any size ranging from 18" to 72".
 All Pemko automatic door bottoms are provided NET length.
 All Pemko automatic door bottoms can be trimmed down by as much as 2" (stock lengths only).
If non-stock sizes are ordered, order must note need to trim 2 inches from the size ordered.


4301CRL Automatic Door Bottom (with end plate removed) to
show mechanism and seal.
MOUNTED TO WOOD OR HOLLOW
METAL DOORS
PEMKOPRENE™, NYLON BRUSH,
SPONGE NEOPRENE AND SILICONE
SEALS AVAILABLE
 Drop-Bar Seal Actuation
 The patented mechanism (all models) causes the drop bar seal to always actuate on the hinge side first. This feature
prevents the seal from skidding along the floor / threshold while the door is being closed. Door hang up will not occur.
PH
94
2
VENTURA, CA
WHITTIER,
CA
WHITTIER,
WHITTIER,CA
CA
800 • 283-9988
MEMPHIS, TN
800 • 824-3018
 Automatic Door Bottoms – Non-Handed Surface and Semi-Mortise Models
 When ordering, please specify if the automatic door bottom is for a semi-mortise application so that shorter screws can be provided.
4301CNBL
4301DNBL
4301GNBL
4301CRL
4301DRL
4301GRL
4301CPKL
4301DPKL
4301GPKL
 Alternate insert for 4301
Finish Designations: (page 95)
BDG bright-dip gold anodized aluminum
C
clear anodized aluminum
D
dark bronze anodized aluminum
G
gold anodized aluminum
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko stocked
and non-stocked finishes. Consult the factory for the price and
availability of non-stocked finishes.
4131BDGPKL
4131CPKL
4131DPKL
4131SNPKL
4131CNBL
4131DNBL
4131SNNBL
4131BDGRL
4131CRL
4131DRL
4131SNRL
NEW FINISH
NEW FINISH
satin nickel
satin nickel
 End Plates (4301 and 4131 Models)
 Alternate insert for 4131
4131BDGSL
4131CSL
4131DSL
4131SNSL
 Alternate insert for 4131
 Black nylon end plates are provided with all 4301 and 4131 models to protect the mechanism and to give a clean aesthetic appearance.
 Plunger end plate prevents the plunger adjustment from rotating.
 End plates keep debris out of the mechanism. Do no tighten with power tool.
[email protected]
WWW.PEMKO.COM
95
 Automatic Door Bottoms – Non-Handed Full-Mortise Models
434ARL
434ANBL
End Plates for
(434 and 411 Models)
 Aluminum end plates are provided with all 434
and 411 models to protect the mechanism and
to give a clean aesthetic appearance.
434APKL
434 End Plate
 Alternate insert for 434
 Screws included
411 End Plate
 Nails included.
Finish Designations: (pages 96-97)
A
mill finish aluminum
CB cladded brass (412 only)
BDG bright-dip gold anodized aluminum C clear anodized aluminum
D
dark bronze anodized aluminum G gold anodized aluminum
S
cladded stainless steel (412 only)
411ANBL
Please refer to the listings under each product for stocked finishes. See page 7 for a complete list
of all Pemko stocked and non-stocked finishes. Consult the factory for the price and availability of
non-stocked finishes.
420APKL
 For hollow metal doors.
 Maximum drop is 1/2".
411ARL
420AVL
 Alternate insert for 420
411ASL
411APKL
 Alternate insert for 411
 Alternate insert for 411
VENTURA, CA
PH
96
WHITTIER,
CA
WHITTIER,
WHITTIER,CA
CA
4
800 • 283-9988
420ASL
 Alternate insert for 420
MEMPHIS, TN
800 • 824-3018
 Automatic Door Bottoms – Handed Surface and Semi-Mortise Models
 These models have all the same features as the 4301 and the 4131 except that
these are handed, and disassembly of the mechanism is required to reverse the hand.
 430 is being discontinued. Stock available for a limited time. Use 4301 instead.
 For easy non-handed installation, Pemko recommends using the 4301 rather
than the 430, and the 4131 rather than the 412. The 4301 and 4131 are shown
on page 95.
412BSL
412CSL
412DSL
412GSL
412SSL
 Alternate insert for 412
430CRL
430DRL
412BRL
412CRL
412DRL
412GRL
412SRL
430CMRL
430DMRL
430CPKL
430DPKL
430CMPKL
430DMPKL
 Alternate insert for 430
 Alternate insert for 430
 End Plates for (430 and 412 Models)
 Aluminum end plates
are provided with all
430 and 412 models to
protect the mechanism
and to give a clean
aesthetic appearance.
412BPKL
412DPKL
412SPKL
412CPKL
412GPKL
 Alternate insert for 412
 Security Door Bottoms
 Help prevent break-ins with Pemko’s Security Door bottoms.
 Great for office buildings, dormitories, hotel/motels, multi family housing, and
other applications where break-ins from interior lever-handles are a problem.
 Mounting screws and a cam are included with both security door bottom models, the
510 and 530.
 Semi-Mortise mount
 Surface Mount
 The 530 includes end plates (shown on page 95) that provide a clean finished look and
prevents debris from entering operating mechanisms.
 Order stop bar (196) and thresholds (270, 2364, etc.) separately.
510C36
510C42
510C48
510D36
510D42
510D48
196A
196B
196D
196G
270A
270B
270D
270G
(Shown at 80% of actual size)
[email protected]
Finish Designations: (Security Door Bottoms)
A
mill finish aluminum
B
mill finish extruded bronze (brass)
C
clear anodized aluminum
D
dark bronze anodized aluminum
G
gold anodized aluminum
530C36
530C42
530C48
530D36
530D42
530D48
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko stocked
and non-stocked finishes. Consult the factory for the price and
availability of non-stocked finishes.
196A
196B
196D
196G
270A
270B
270D
270G
(Shown at 80% of actual size)
WWW.PEMKO.COM
97
 Door Shoes
 Now available with PemkoPrene™ (PK) thermo-plastic elastomer, an excellent
cold weather seal which stays flexible between -70°F & +250°F.
 Also available with vinyl (V); both seals are the same shape and size.
234AV
234DV
234GV
 Slotted holes for easy adjustment.
 Rain drip model is ideal for deflecting rain away from the bottom of door.
 Door shoes are provided with stainless steel fasteners.
234APK
234DPK
234GPK
209AV
209DV
209GV
 Positive pressure with PK seal only.
211AV
211DV
211GV
211APK
211DPK
211GPK
NEW FINISH
210AV
210APK
210BDGV 210BDGPK
210DV
210DPK
210GV
210GPK
210PWV 210PWPK
210SNV 210SNPK
satin nickel
 NEW Satin Nickel finished product
supplied with BLACK insert. GRAY
available upon request.
 Positive pressure with PK seal only.
 Positive pressure with PK seal only.
220AV
220DV
220GV
220APK
220DPK
220GPK
NEW FINISH
satin nickel
215AV
215APK
215BDGV 215BDGPK
215DV
215DPK
215GV
215GPK
215PWV 215PWPK
215SNV 215SNPK
 NEW Satin Nickel finished product
supplied with BLACK insert. GRAY
available upon request.
 Positive pressure with PK seal only.
 Positive pressure with PK seal only.
NEW FINISH
NEW FINISH
satin nickel
satin nickel
 NEW Satin Nickel finished
product supplied with BLACK
insert. GRAY available upon
request.
 NEW Satin Nickel finished product
supplied with BLACK insert. GRAY
available upon request.
217AV
217APK
217SNV
217BDGV
217DV
217BDGPK 217DPK
217SNPK
217GV
217PWV
217GPK 217PWPK
216AV
216APK
216SNV
216BV
216BDGV 216DV
216GV
216BPK 216BDGPK 216DPK 216GPK
216SNPK
216PWV
216PWPK
 Positive pressure with PK seal only.
 Positive pressure with PK seal only.
VENTURA, CA
PH
98 WHITTIER,
WHITTIER,
CA
WHITTIER,CA
CA
6
800 • 283-9988
MEMPHIS, TN
800 • 824-3018
 Door Shoes – Continued
Finish Designations: (pages 98-99)
A
mill finish aluminum
B
brass
BDC bright-dip clear anodized aluminum
BDG bright-dip gold anodized aluminum
D
dark bronze anodized aluminum
G
gold anodized aluminum
PW painted white aluminum
SN satin nickel anodized aluminum
 For hollow metal doors with
inverted bottom channel.
221AV
221DV
221GV
Please refer to the listings under each product for stocked
finishes. See page 7 for a complete list of all Pemko
stocked and non-stocked finishes. Consult the factory for
the price and availability of non-stocked finishes.
222AV
222APK
222DV
222DPK
221APK
221DPK
221GPK
222GV
222GPK
 Positive pressure with PK seal only.
2221AV
2221DV
2221GV
2221APK
2221DPK
2221GPK
 For hollow metal doors with
inverted bottom channel.
 Positive pressure with PK seal only.
 Combination
door shoe and
kick plate.
1
(25.4)
2211AV 2211APK
2211DV 2211DPK
2211GV 2211GPK
 Positive pressure with PK seal only.
Thermal Barrier Model
 Resin thermal break (FG) prevents conductivity
of cold from exterior to interior.
 Supplied with PemkoPrene™ Seal.
216BDCFG
216BDGFG
 Positive pressure with PK seal only.
216DFG
216PWFG
 Fabrication Options for Door Shoes
 Combination door shoe
and kick plate, with
raindrip.
 1/2” Full Notch
 1/2” Half Notch
 Fabrication includes: removal of rain drip and front flange of door shoe to
prevent interference with door stop and weatherstrip.
 Fabrication includes: removal of rain drip to prevent interference with door
stop and weatherstrip.
 Ordering: order width of door leaf,
and designate by adding “M”
following the product number.
 Ordering: order width of door leaf and designate by
adding “N” following the product number.
(Example: a 216AV with a
1/2" full notch fabrication,
for a 36" door leaf = 216AVM36.)
[email protected]
 Special: Other half notches available are 9/16”, 5/8”,
and 3/4” widths, please specify when ordering.
(Example: a 216AV with a
1/2" half notch fabrication,
for a 36" door leaf = 216AVN36.)
WWW.PEMKO.COM
99
 Door Bottom Sweeps
 Door bottom sweeps are most commonly used on the exterior of
outswing doors.
 Pemko has a full line of superior sealing nylon brush door bottoms on pages
106-108.
 Rain drip models are best for doors exposed to water conditions.
 Slotted holes for easy adjustment.
 Door sweeps are provided with stainless steel fasteners.
321SSN
315BN
315CN
315DN
315GN
315SNN
368CN
368DN
368GN
315SSN
NEW FINISH
satin nickel
 NEW Satin Nickel
finished product
supplied with
BLACK insert.
GRAY available
upon request.
321CN
321DN
321GN
309AP
309BDGP
309DP
309GP
309PWP
309SNP
307AV
307BDGV
307DV
307GV
307PWV
307SNV
57AV
57BDGV
57DV
57GV
57PWV
57SNV
56AV
56BDGV
56DV
56GV
56PWV
56SNV
NEW FINISH
NEW FINISH
satin nickel
satin nickel
NEW FINISH
NEW FINISH
satin nickel
satin nickel
360PAF
360PGF
18062WNB
18100WNB
 Only available in
36" lengths.
 Only available
in 36" lengths.
 Shown (left to right): 18062DNB, 18100PWNB, 307AV.
VENTURA, CA
PH
100WHITTIER,
WHITTIER,
CA
WHITTIER,CA
CA
8
800 • 283-9988
MEMPHIS, TN
800 • 824-3018
 Door Bottom Sweeps – Continued
99PAV36
99PDV36
99PGV36
99PWV36
3452AV
3452BDGV
3452DV
3452GV
3452PWV
3452SNV
3452ANB
3452BDGNB
3452CNB
3452DNB
3452GNB
3452PWNB
3452SNNB
NEW FINISH
satin nickel
NEW FINISH
satin nickel
345ANB
345BDGNB
345DNB
345GNB
345PWNB
345AV
345BDGV
345DV
345GV
345PWV
345A
345B
345BDG
345D
345G
345PW
90041CNB
90041DNB
90062CNB
90062DNB
90100CNB
90100DNB
90137CNB
90137DNB
Finish Designations: (pages 100-101)
A
mill finish aluminum
B
mill finish extruded bronze (brass)
BDG bright-dip gold anodized aluminum
C
clear anodized aluminum
D
dark bronze anodized aluminum
G
gold anodized aluminum
PA
painted aluminum
PD
PG
PW
SS
SN
W
painted dark bronze aluminum
painted gold aluminum
painted white aluminum
see individual part for finish
satin nickel anodized aluminum
wood – solid unfinished oak
Please refer to the listings under each product for stocked finishes. See page 7 for a complete list of all Pemko stocked and
non-stocked finishes. Consult the factory for the price and availability of non-stocked finishes.
[email protected]
WWW.PEMKO.COM
101
 Residential Automatic Door Bottoms
 Surface type for
wood doors.
 1/2" maximum drop.
 Can be trimmed
down by as much as 2".
 Non-handed.
 End plates are not
provided.
 Actuation button
fastens to stop.
405CV36
405DV36
405GV36
SA1
SA2
SA3
SA4
SA1D
SA2D
SA3D
SA4D
SA1G
SA2G
SA3G
SA4G
28"
32"
36"
42"
 Spring loaded door bottom sweep.
 Available in 36" length only.
 May be cut down to 24" minimum length.
 Vinyl Door Shoes
Finish Designations: (Vinyl Door Shoes)
D
dark bronze colored
Please refer to the listings under
each product for stocked finishes.
See page 7 for a complete list of all
Pemko stocked and non-stocked
finishes. Consult the factory for the
price and availability of non-stocked
finishes.
V80D36
 Dual durometer vinyl door shoe.
 Furnished net 36".
 New Door Shoes
 Dual seal gives front and rear contact with thresholds.
 Works well in conjunction with squareback thresholds (see page 35).
triple foam (TF)
2660ATF
2660BDGTF
2660DTF
2660SNTF
2660PWTF
triple foam (TF)
 Alternate insert for 2660.
NEW FINISH
satin nickel
VENTURA, CA
PH
102WHITTIER,
WHITTIER,
CA
CA
10 WHITTIER,CA
2660AV
2660BDGV
2660DV
2660SNV
2660PWV
800 • 283-9988
2661ATF
2661BDGTF
2661DTF
2661SNTF
2661PWTF
 Alternate insert for 2661.
NEW FINISH
satin nickel
MEMPHIS, TN
2661AV
2661BDGV
2661DV
2661SNV
2661PWV
800 • 824-3018
 Door Bottoms
 Specialty door bottoms that may be used in many different applications.
 Some of these shapes may be used as meeting stile gasketing, see pages 79-80 for examples.

313AN
313DN
317AN
313GN
317DN
317AN in
alternate
position.
317GN
314CN
318AV
318BDGV
318DV
318GV
318PWV
314DN
314GN
3185AV
 Door Top Weatherstrip
PA343
B344
 For top of 1-3/8" wood doors.
 For top of 1-3/4” wood doors.
PA344
377VP
 pile seal
377V
 vinyl seal
 Rigid tan colored vinyl with vinyl (V) insert or pile (P)
insert used as a door top (or bottom) filler strip for
hollow metal doors.
 Overhead rain drip with slotted holes.
 Should be ordered a minimum of 4" longer than the
door width.
347A
68AR
347D
68DR
347G
68GR
 For outswing doors only.
346C 346D
346G
346PW
[email protected]
 Should be ordered a minimum of 4"
longer than the door width.
WWW.PEMKO.COM
103
 Garage / Overhead Door Weatherstrip
 Neoprene, Vinyl, and Nylon Brush: Pemko has all the seals you need for all types of garage doors, commercial, industrial, and / or residential.
V365
R364-100
 Extruded from gray vinyl (V) and
furnished with roofing nails.
 Extruded from black rubber (R).
 Supplied in 100-foot bulk rolls.
 Also used to close gaps along the sides
of a door.
 For sectional overhead door, nail to
jamb.
 Supplied in 250-foot bulk rolls.
P361V9
P361V16
 Extruded from gray vinyl (V) and furnished with roofing
nails.
 Supplied in 9- and 16-foot rolls.
 Pemko's brush conforms to the grooves
on overhead doors, making it one of the
best seals available.
P366V16
45100CNB
45100GNB
 Extruded from black vinyl (V) and furnished with
roofing nails.
 Nails to door edge, jamb edge, or door bottom.
 Supplied in 16-foot rolls.
45100DNB
45100PWNB
 Brush Weatherstrip (such as the 45100
shown) is excellent for Garage / Overhead
Door Weatherstrip applications. (See the
Brush Weatherstrip Catalog.)

45100PWP installed at the head
and jamb of a residential sectional
garage door. (See the Brush
Weatherstrip Catalog.)
N199
196A  Retainer bar for N199
Finish Designations: (pages 102-104)
A
mill finish aluminum
BDG bright-dip gold anodized aluminum
C
clear anodized aluminum
G
gold anodized aluminum
PA painted aluminum
B
mill finish extruded bronze
(brass)
D
dark bronze anodized
aluminum
PW painted white aluminum
 Order 196A separately (see page 97);
furnished undrilled unless requested
otherwise.
 Heavy duty door bumper extruded from
black neoprene (N).
 Available in 8',10',12' and 15' lengths.
 Meets MIL-R6855 class II, grade 40, type A
material, remains flexible to –67° F.
Please refer to the listings under each product for stocked finishes. See page 7 for a complete list of all
Pemko stocked and non-stocked finishes. Consult the factory for the price and availability of non-stocked
finishes.
VENTURA, CA
PH
104
WHITTIER,
CA
WHITTIER,
CA
12 WHITTIER,CA
800 • 283-9988
© Pemko Mfg. Co. 2004
DB2004
MEMPHIS, TN
800 • 824-3018