I Control Myself… Internal Set Point Option


I Control Myself… Internal Set Point Option
 HVAC Controls
Electric Actuators Humidifiers
Electric Heaters Actuated Valves Head Office
400 Lebeau Blvd.
Montreal, Quebec, Canada H4N 1R6
Tel.: (514) 333-1433
Fax: (514) 333-3163
Toll Free: 1-800-361-2308
I Control Myself… Internal Set Point Option
If you are a technician or a caretaker who maintains HVAC systems in a building, you
probably experienced this at least once. Complaints about the temperature being too
hot or too cold. Besides system issues or malfunctions of any HVAC systems, it’s
sometimes as simple as the wall-mounted thermostats being adjusted by the public!
Our modulating electric heaters can be controlled without a user-accessible thermostat.
The set point controller is built-in the heater and connected to a duct temperature
sensor (STC8) which is mounted about 6-8’ downstream of the heater or to a remote
room temperature sensor (STR1). This option allows you to adjust a set point anywhere
between 61°F (16 ºC) to 90°F (32 ºC) on the HEC board which is the brain of the heater.
Once a set point is selected and installed in the duct, only the maintenance technician
can access the heater to change the set point temperature.
How does this work? Having the internal set point on it, the HEC board does its
calculations and acts as a thermostat transmitting the correct modulating signal to the
heater to satisfy or reach the set point temperature based on the readings it gets from
the temperature sensor.
In order to have a more precise temperature control, the internal set point option is
available only on heaters with the following specifications;
-­‐ Open coil type element only.
-­‐ Maximum dimensions of 48”W x 40”H.
NEP Inc.
P.O. Box 1151
Medford Oregon,
USA 97501
Tel.: (541) 531-5746
Middle East & Asia
NEP International FZE
P.O. Box 125687,
Dubai, UAE
Tel.: +97155 8825487
Fax: +9714 3426772
Neptronic Pte Ltd
Office D6, #03-38,
Mountbatten Square
229, Mountbatten Road,
Singapore – 398 007
Mobile: +65 8118 4184
Tel: +65 6650 6212
Fax: +65 6491 6423

Similar documents