Product Info - King Electric
Transcription
Product Info - King Electric
Cove Heater KCV Series KCV A 12 B 10 C A: Series B: 12 - 120V 20 - 208V 24 - 240V C: Watts (02=250 - 15=1500) Radiant & Convection Heat Long Life Elements Quiet Running Junction box at each end Extruded aluminum front panel Powder coated high temp. finish Easy surface-mount installation Wall thermostat recommended Ribbed front for maximum surface radiation Open-back design for maximum convection 7/8” diameter knockouts for 1/2” conduit Standard color: almond (white optional) 2-year limited warranty The KCV Series Cove Heater The KCV cove heater is a radiant heater that also produces convection heat by heating the air similar to a baseboard. By combining the quick comfort of radiant heat along with the sustained warmth of convection heat, warm air is uniformly dispersed throughout the room. The cove heater is mounted near the ceiling, eliminating furniture placement problems. Surface temperatures are lower than baseboard or fan heaters, making a pleasant form of heat similar to older ceiling cable heating systems. With no moving parts this heater is quiet and maintenance free. Typical uses are day care centers, assisted living housing, housing developments, laundry rooms, bathrooms, bedrooms. Ordering Information 120V 208V 240V MODEL KCV1202 KCV1204 KCV1206 KCV1207 KCV1210 KCV2004 KCV2006 KCV2007 KCV2009 KCV2010 KCV2012 KCV2015 KCV2404 KCV2406 KCV2407 KCV2409 KCV2410 KCV2412 KCV2415 *Add suffix -BW for optional bright white color UPC 11801 11800 11803 11806 11812 11816 11817 11819 11820 11821 11822 11823 11824 11827 11830 11833 11836 11839 11842 VOLTS 120 120 120 120 120 208 208 208 208 208 208 208 240 240 240 240 240 240 240 WATTS 250 450 600 750 1050 450 600 750 900 1050 1200 1500 450 600 750 900 1050 1200 1500 AMPS 2.1 3.8 5.0 6.3 8.8 2.2 2.9 3.6 4.3 5.0 5.8 7.2 1.9 2.5 3.2 3.8 4.4 5.0 6.3 LENGTH 24” 34” 47” 59” 83” 34” 47” 59” 71” 83” 94” 118” 34” 47” 59” 71” 83” 94” 118” SHIP WEIGHT lbs 5.5 7 9.5 11 15.5 7 9.5 11 13 15.5 17 26 7 9.5 11 13 15.5 17 26 Engineering Specifications Construction: Constructed of extruded aluminum with a maximum cross section thickness of .962”. With sawtooth profile to increase radiating surface area. Open on top and bottom for maximum convection heating room air. With 32 cubic inch junction box at both ends, furnished with 7/8” knockouts on back and top to facilitate 1/2” conduit. Ni-CChrome wire embedded in Magnesium Oxide powder enclosed and sealed in aluminum sheath. Element wattage density of approximately 150 watts per lineal foot. With full length back case constructed of 22 gauge electrogalvanized steel with baked enamel finish. Two year limited warranty. Ratings and Approvals: The heaters shall be available in ratings from 250 - 1500 watts at 120 and 208/240 Volts. UL (E41422), ETL (473-2735) Cove Heater KCV Series Dimensional Data Top View Locate Studes in Wall & Drill 3/16” holes and secure heater to wall with screws 24” to 118” 3 1/8” 7/8” knock-out for ½” conduit 4” Back View MINIMUM CLEARANCE Heaters are not to be mounted closer than 2½” from drywall ceiling or 6” from vinyl or drop ceiling. Heaters to be mounted at least 6 feet from floor. 3 1/8” 7/8” knock-out for ½” conduit Screw with bonding washer Accessories MODEL KCVT-1R KCVT-1L KCVT-2R KCVT-2L DESCRIPTION Single Pole Right side wiring Single Pole left side wiring Double Pole Right side wiring Double Pole Left side wiring WEIGHT lbs .25 .25 .25 .25 AIRFLOW Wall Warm Air Radiant: Heat produced is emitted as radiant infrared invisible rays Convection: Heat produced is also transmitted by natural convection from the top of the heater Radiant Panel Heated Air KCVT-1 Cold Air