lumens - Tacprogear.com

BAGS & PACKS
TACPROGEAR
PERFORMANCE ABOVE ALL ELSE
2
www.tacprogear.com
BAGS & PACKS
BAGS & PACKS
TACPROGEAR
Our Products
Our Customers
Tacprogear is a leading manufacturer of tactical, military, law enforcement and outdoors equipment.
This includes rugged nylon pockets and pouches, body armor, apparel, footwear, bags and packs,
and more. Tacprogear products were created to meet the most rigorous demands of operators
around the world. Since 2005, our products have deployed with Private Security Contractors, Law
Enforcement, and Military professionals who demand performance above all else. Visit our website
or call us for the location of a distributor or dealer near you.
Our customers demand the very best and expect us to deliver
the highest quality of products and services. We believe the
customer is always right and we strive to provide the best possible
solutions every single day.
Tacprogear products can be found online and in retail locations
around the world. For the location of a dealer near you, please check
our website.
Our Pledge
Ordering Information
Tacprogear products are made with the highest quality materials
available. Our attention to detail means every product is free
from manufacturer’s defects, or we will replace it at no charge to you.
Online: www.tacprogear.com
Call: Customer Service (561) 865-7279 Fax: (561) 265-4061
Email: [email protected]
If you are interested in becoming a dealer for Tacprogear please
email [email protected] for an application.
755 NW 17th Ave • Suite 106
Delray Beach, Florida 33445 USA
2
www.tacprogear.com
PERFORMANCE ABOVE ALL ELSE
2
BAGS & PACKS
reinforced
carry
strap
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
SPEC-OPS ASSAULT PACK 1
covered
opening
for
hydration
tube
B-SAP1
rollover
air mesh
shoulder
pads
The entire Spec-Ops Assault pack line features our unique MOLLE Spine for
hanging additional items on the outside of your pack, making this a versatile
3-day or climbing pack.
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
• Large main compartment
• Four external side compression straps
removable
carry
pad
cell
phone
pocket
• Two zipper pulls on the main compartment for easy access to the inside of the pack
molle
spine
• Compartment for carrying a hydration bladder and an opening on the top of the bag for the hydration tube
• Two external accessory pockets
• Smaller secondary compartment on front face
Dimensions:
Main Compartment:
Accessory Pockets: 8”D x 14”W x 19”H
4”D x 5”W x 12”H
cinch
straps
BAGS & PACKS
SPEC-OPS ASSAULT PACK 2
B-SAP2
Larger than the SAP1, our mid size pack features two
main storage compartments as well as two external pockets
designed to provide ready access to items needed quickly.
Designed to carry a heavier load, the SAP2 features a
fully adjustable padded waist strap, side cinch straps, and
an internal hydration compartment. The shoulder straps
were redesigned with an improved roll over air mesh for
enhanced moisture wicking. Dimensions:
Main Compartment:
Secondary Compartment:
Accessory Pockets: 9”D x 14”W x 20”H
3”D x 12”W x 18”H
4”D x 5”W x 12”H
removable
padded
waist
strap
4
www.tacprogear.com
5
BAGS & PACKS
adjustable
shoulder
straps
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
torso
height
adjustment
BAGS & PACKS
SPEC-OPS ASSAULT PACK 3
adjustable
shoulder
straps
B-SAP3
unique
off-body
suspension
Our largest pack in the SAP line, the SAP 3 has massive capacity in
the main compartment with internal load cinch straps. The secondary
compartment is located between the main compartment and two
front pockets, and includes a special ventilated mesh storage pocket.
The two front pockets were designed to provide ready access to
items needed quickly. Two side storage pockets with MOLLE webbing
allow mounting of MOLLE compatible pouches.
removable
carry
pad
hydration
compatible
side view
CORE PACK
B-CORE1
Made with a unique high-strength, lightweight
fabric, and revolutionary S-Frame contour
shape. Crossover design techniques from the
outdoor industry combine the best of both
worlds in one unique pack. Fully adjustable
off-shoulder straps, our ventilated “Cool Flow”
back panel, and roll-over air mesh on the
shoulder straps offer features never seen in the
tactical world. The CORE pack offers the same
functionality as our SAP1, in a lighter design.
Dimensions:
Main Compartment:
Secondary Compartment:
Accessory Pockets:
Side Pockets:
6”D x 16”W x 22”H
3”D x 13”W x 20”H
4”D x 6”W x 13”H
2”D x 4”W x 13”H
Dimensions:
Primary Space:
External Pockets:
19”D x 12.5”W x 19”H
2”D x 5”W x 12”H
• 400D weight with 1000D strength
• YKK Zippers
• ITW Nexus accessories
lightweight
fabric
6
www.tacprogear.com
7
BAGS & PACKS
BAGS & PACKS
FOLDS
TO 6” X 6”
side
opening
for quick
laptop
access
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
STASH PACK
B-STSH1
FREQUENT AIR TRAVELER PACK
The STASH Pack was originally designed
for tier one operators to collect evidence
during raids on high value target locations
in the Middle East.
Rapidly deployed from a packed position,
the STASH Pack opens into a mid-size
open top ruck style pack.
B-FAT1
This unique open top, ruck style pack was designed
with the tactical traveler in mind. The FAT Pack
features a padded laptop compartment with side
access allowing the user to quickly remove a laptop
during security screening.
Two side pockets provide extra storage for travel
documents, cell phones, iPods, and other devices.
Dimensions:
Primary Space:
External Pockets:
19”D x 14”W x 8”H
12”D x 5”W x 4”H
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
easy
access
cinch
opening
Dimensions:
Primary Space:
External Pockets:
8”D x 14”W x 19”H
4”D x 5” W x 12”H
• 400D weight with 1000D strength
• YKK Zippers
• ITW Nexus accessories
Trim Available in:
Black/Gray
Black/Coyote Tan
Black/Red
Black/Blue
back
8
www.tacprogear.com
9
BAGS & PACKS
BAGS & PACKS
COVERT GO BAG
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
COVERT GO BAG LITE
B-CGB1
B-CGB2
The Tacprogear Covert Go Bag is a
single shoulder strap pack that offers
all the functionality of a day pack with
some very unique features.
The Tacprogear Covert Go Bag Lite
was designed for a quick hike or trek
through town.
Dimensions:
Dimensions:
13”D x 19”W x 5”H
6”D x 12.25”W x 17.5” H
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
PISTOL
WHEEL
also available
without external MOLLE
in new lightweight fabric
B-CGBW1
B-CGBW2
10
www.tacprogear.com
• 3-D mesh back for comfort
• Single ambidextrous padded sling with swivel buckles for easy removal
• Dual access to Tacprogear’s universal pistol wheel
• External MOLLE webbing for attaching additional pouches
• Removable accessory pad, which can be used to attach MOLLE compatible pouches
• Dual-entry zippered pockets for Tacprogear’s universal pistol wheel
• External MOLLE webbing [available with or without webbing]
• Reinforced drag/carry handle
• Conceal carry platform that securely holds a handgun with hook and loop closure
• Internal plate pocket that holds a standard 10 x 12 ballistic plate
• Holds a standard 10” x 12” ballistic plate in the main compartment for added protection
• Additional internal zippered storage compartment
11
BAGS & PACKS
H2O TO GO
BAGS & PACKS
B-HOG2
OPERATOR TRAVEL BAG
The Tacprogear H2O TO GO
Hydration System is essential
when working in the field.
B-OTB1
Designed as an alternative to a fanny-pack, the OTB
offers a functional yet discreet way to carry a pistol
while traveling.
Dimensions:
1.5’’D x 9.5’’W x 18.5’’H
The main compartment is large enough to carry a wallet,
passports, iPods, documents and other personal effects
you want to keep close when on the road.
The two side compartments allow quick access to cell phones or spare magazines.
Features a padded carry strap and front zipper pocket for boarding cards or creds.
Pistol wheel included.
Dimensions: 4’’D x 11’’W x 14’’H
PRO TRAVEL BAG
B-PTRV1
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
molle
spine
PISTOL
WHEEL
The Pro Travel Bag provides users with an alternative to the conventional
laptop or messenger bag.
Designed with our signature pistol wheel, the
side zipper allows users to quickly access a
pistol from a hidden compartment.
A reinforced, padded laptop bag is
removable which allows the user to
quickly withdraw a laptop when
processing through security
check points.
Additional pockets and storage
make this one of our most
versatile travel bags.
Pistol wheel included.
Dimensions: 8’’D x 11’’W x 18’’H
12
www.tacprogear.com
• 100 oz. (3.0 L) bladder with Microban® antimicrobial technology
• Hydration tube that can be accessed through the right or left side
• External removable cap for easy filling, cleaning & ice addition
• Front panel includes the unique Tacprogear MOLLE Spine
• Back panel and shoulder straps built with padded 3D air mesh for added comfort
• Back panel also works as insulation to keep your drink cool
13
BAGS & PACKS
TACTICAL ROLLING
LUGGAGE BAG
FULL SIZE
TACTICAL ROLLING
LUGGAGE BAG
CARRY ON
B-TRLB2
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
B-TRLB1
durable
wheels
• Durable wheels and an ambidextrous retractable handle • Handle stored in a zippered compartment
• Three mesh-lined pockets on interior for quick access storage
• Two internal compression straps to secure your gear
• Reinforced edges and bottom sliders
• Tacprogear signature MOLLE Spine on the front
• Reinforced carry handles on all sides
• Transparent ID panel with hook and loop closure on the back
Dimensions:
14
8.5”D x 13.5”W x 21”H
www.tacprogear.com
• Three mesh-lined pockets on interior for quick access storage
• Dual zippered mesh panel to secure your gear
• Rugged edges and sliders for stability and durability
• Tacprogear signature MOLLE Spine on the front
• Reinforced carry handle on the top
• Two padded carry straps
• Loop with quick release buckles to help carry any additional items
• Transparent ID panel with hook and loop closure
• Two cinch straps on either side of the bag
Dimensions:
PERFORMANCE ABOVE ALL ELSE
10”D x 15”W x 29”H
15
BAGS & PACKS
SNIPER DRAG BAG
B-SDB1
BAGS & PACKS
• Unfolds into a full shooters mat configuration
• Webbing loops for ghillie attachments • Two detachable padded shoulder straps • Padded carry handle
The Tacprogear Sniper Drag Bag is
designed for the elite operator.
Dimensions:
Length: 50.5” Width (Open): 32”
Width (Closed): 11”
• Reinforced drag handle
• Quick release cinch straps for weapon retention • Internal pocket with a protective flap designed to hold 10 rounds of ammo
• 11”W X 8”H map pocket • MOLLE webbing for additional pouches
TACTICAL RIFLE CASE
Available in:
32” - B-TRC1
35” - B-TRC2
40” - B-TRC3
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
The Tacprogear Tactical Rifle Case is a great solution for
transporting sporting rifles or carbines of all shapes and sizes.
PERSONAL DEFENSE WEAPON CASE
B-PDWC1
Whether you are going to the range, on a mission, or hunting, the Tacprogear
Personal Defense Weapon Case is an ideal carry case for any shooter.
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
16
www.tacprogear.com
Dimensions:
2”D x 12”W x 35”H
• Three external magazine pouches
• Reinforced carry handle • Durable shoulder strap
• Tacprogear MOLLE Spine
• External zippered entry pocket
• Adjustable hook and loop retention straps to secure your weapon
• 0.5” foam padded edges for shock absorption
17
RAPID LOAD-OUT
BAGS
BAGS&&PACKS
PACKS
RAPID LOAD-OUT BAG
Both of the Tacprogear Rapid Load-Out Bags were designed to be
an operator-friendly gear/travel bag. These bags carry all of your
essential equipment no matter what the mission is.
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
Regular Size
B-RLO1
B-RLO1
Dimensions:
Main Space:
External Pockets:
11”D x 20”W x 11”H
2”D x 9”W x 9”H
B-RLO2
Dimensions:
Main Space
External Pockets:
13”D x 27”W x 13”H
3”D x 12”W x 12”H
• 1000D Cordura Nylon
• YKK Zippers
• ITW Nexus accessories
•Specially designed opening to
maximize access to your gear
•Compression strap to help bear the load and avoid any additional stress on the zipper
•Our unique MOLLE Spine design
•Available in 2 Sizes—
Regular & Extra-Large
B-RLO2
Extra-Large Size
18
2
www.tacprogear.com
2
19
CARRIERS
CARRIERS
Standard Sizes on all vests and carriers: Small (S), Medium (M), Large (L), Extra Large (XL)
and Double Extra Large (XXL). 3XL-4XL and custom sizes available for surcharge.
• Capable of holding two standard 10” x 12”
ballistic plates in the smallest possible configuration
• Ambidextrous zippered pocket allows access to the Tacprogear Universal Tactical Pistol Wheel
• Front and back MOLLE webbing • Reinforced drag handle • Padded shoulders • Adjustable shoulder and waist straps • Built for comfort and durability
• Universal size
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
RAPID ASSAULT
PLATE CARRIER
V-RAPC
The Tacprogear Rapid Assault Plate
Carrier was designed to provide
maximum protection and agility for
law enforcement, military, and private
security operators.
Available in: BK-Black • CT-Coyote Tan
OD-OD Green
CONCEALED VEST
V-CV1
Our standard Concealable Vest is
made of high quality cotton/Lycra
with a soil resistant finish. Provides
extended torso and side coverage
with enhanced mobility. Air Mesh
inner lining keeps you cool and dry.
drag
strap
COVERT TACTICAL
VEST
V-CVT1
Our basic tactical vest with MOLLE
webbing. Compatible with soft armor
panels from our concealed vest
(V-CV1). Internal plate pockets hold
standard 10” x 12” ballistic plates.
PISTOL
WHEEL
20
www.tacprogear.com
plates p. 24
21
CARRIERS
OUTER TACTICAL VEST
V-OTV1
STANDARD TACTICAL VEST
V-STV1
Our STV provides basic
functionality and maximum
comfort. Ideal for Civilians,
NGO’s and Law Enforcement
protection.
Reinforced drag handle.
Extended torso and side
coverage with enhanced
mobility. Air Mesh inner
lining to keep you cool
and dry.
Our OTV design was based upon the standard
military issue vest used by the US Army. Front opening with
overlapping protection, front and rear plate pockets, MOLLE
webbing, reinforced drag handle for emergency extraction,
& waist size adjustment.
QUICK RELEASE
TACTICAL VEST
Right/Left
Release
CARRIERS
• Ambidextrous single pull feature allows rapid release
V-QRTV1
The QRTV was developed for
maritime and other specialized
operations where the user may
need to quickly ditch equipment.
Ambidextrous single pull feature
allows rapid release.
• Front, back and side MOLLE webbing • Accommodates both soft and hard armor • Internal plate pockets fit a standard
10” x 12” ballistic plate • Reinforced drag handle for emergency
extraction • Adjustable waist and shoulder hook and loop system
• Adjustable hook and loop cummerbund system
ALL ARMOR
IS AVAILABLE IN
EITHER NIJ CERTIFIED
OR NIJ COMPLIANT
BALLISTIC PACKAGES
AVAILABLE
WITHOUT
PLATE
POCKET
V-STV2
NIJ 0101.06
PACKAGES
AVAILABLE
• Front and back loop sided strips for applying ID patches
• Non-slip shooters pad adapts to right or left shoulder
COMMERCIAL
MTV
V-CMTV1
The commercial version of the Modular Tactical Vest provides increased
protection, side coverage, and front and rear plate pockets. Optional groin,
neck and shoulder protection is available.
drag
strap
PSD OPERATOR VEST
V-PSD1
Our PSD was designed for Private
Security personnel who require
additional mobility in the arm and
shoulder area. The low profile
design features front and rear plate
pockets, MOLLE webbing, and a
reinforced drag strap.
22
www.tacprogear.com
• Improved closures with an optional quick release system
• Increased protection and coverage with optional groin, neck and/or shoulder (DAPS) protection
• Front, back, and side plate pockets
• Reinforced drag handle for
emergency extraction
23
PLA
BAGS
TES
& PACKS
Level IV
Stand Alone
Plate
BAGS HELMETS
& PACKS
10 x 12 BALLISTIC
CERAMIC PLATE
A-BCP1
Available in NIJ levels III, ICW, and
IV stand-alone (SA) with a variety of
cuts including shooter, single curve
and multi-curve. Ceramic options include:
Aluminum Oxide, Silicon Carbide
or Boron Carbide.
Available in: BK-Black •OD-OD Green •
CT-Coyote Tan
• Tested in accordance to the NIJ Standard-0101.04 & 0101.06
• Available in 10 X 12 Shooters Cut
PASGT HELMET
A-PASGT1
ALL ARMOR
IS AVAILABLE IN
EITHER NIJ CERTIFIED
OR NIJ COMPLIANT
BALLISTIC PACKAGES
10 x 12 PE BALLISTIC
RIFLE PLATE
Level III
Light Weight
Stand Alone
Plate
The PASGT (Personal Armor System Ground Troops) Helmet is
lightweight and functional with optimal protection, comfort and
insulation for all situations and weather conditions.
A-BPE1
Features:
• Tested to NIJ Standard-0101.06
• Provides Level IIIA ballistic protection
• Ergonomic design to allow for full head rotations and visibility
• 3 & 4-point harness system for improved weight distribution and easy adjustment (optional padding system available)
The Tacprogear Ballistic PE Rifle Plate is comprised
of a high performance polyethylene.
• Tested in accordance to the NIJ
Standard-0101.04 & 0101.06
• Available in 10X12 Shooters Cut
ACH-MICH HELMET
A-ACH1
BALLISTIC
SHIELD
BALLISTIC STEEL
PLATE
A-BSRP1
A-BESSC
Manufactured from the
latest high performance
ballistic materials and
technology available.
Options include glass panel,
weapon slot, carry handle,
and various lighting
configurations.
Standard sizes 8” x 10” and
10” x 12” are available in either
6mm or 8mm thickness.
Black paint coating or nylon
cover available.
SIDE SAPI PLATES
AVAILABLE (not shown)
2
24
www.tacprogear.com
The Tacprogear Advanced Combat Helmet (ACH)
design is based on the Special Forces Modular
Integrated Communications Helmet (MICH). This
helmet is available in standard and lightweight
configurations,with increased ballistic protection Features: • Improved field of vision • Capable of attaching NVG mounts and communication accessories • Available with 3 or 4-point adjustable harness (optional padding systems available) • Coated with an epoxy primer and a Mil-Spec chemical agent resistant coating (CARC) • Also available in Mid or High Cut/boltless available
• Lightweight UHMWPE available
25
2
HELMETS
BAGS & PACKS
BAGS & GLOVES
PACKS
BUMP HELMET
A-BUMP1
• Lightweight Design/Non Ballistic
• Upper dovetail accessory rail for mounting devices such as low-profile lights and helmet cams
• Lower dovetail accessory rail for mounting communication headsets, battery pack, and other accessories
• Top and side strips of loop for attaching hook sided devices like illuminators, strobe lights, and/or battery packs
GRIP
SHOOTER
G-LWTG
G-OSFG
•Padded palm & knuckles protect from impact & vibration
•Tacky fingertips increase sensitivity & finger control
•Neoprene padded knuckles
•Superb dexterity: an excellent glove for shooters
•Lightweight & ventilated
•Great for hot & humid conditions
•Glove top is fully vented and breathable
•Touch fasten wrist closure
• Front mount for night vision, cameras, or other optic devices
COVERT STRIKE
PROTECTOR
• Padded suspension system with an adjustable 4-point harness
G-HKCG
• Made in the USA with UHMWPE material
•Hard knuckle protection reinforced with Kevlar
•Leather fingertip increases sensitivity & finger control
•Ideal grip for weapons & hand protection
• Front mount for night vision, cameras, or other optic devices
• Padded suspension system with an adjustable 4-point harness
• Available in: Multicam, Matte Black, OD Green and Desert Tan
SPEC-OPS
HIGH CUT HELMET
A-SOHC1
• Lightweight Design/Level IIIA Ballistic Protection
• Upper dovetail accessory rail for mounting devices such
as low-profile lights and helmet cams
• Lower dovetail accessory rail for mounting communication headsets, battery pack, and other accessories
• Top and side strips of loop for attaching hook sided devices like illuminators, strobe lights, and/or battery packs
• Available in: Black, OD Green, and Desert Tan
G-HKOG
®
•Padded palm protects from impact & vibration
2
26
www.tacprogear.com
•Carbon fiber knuckle protection
•Tacky fingertips increase sensitivity & finger control
•Ideal grip for weapons & hand protection
•Padded palm protects from impact & vibration
27
2
DUTY GEAR
Tacprogear manufactures the highest quality molded ballistic nylon duty gear.
Our crisp, professional gear provides superior abrasion resistance,
high strength snaps, and always maintains its shape.
Features:
• Constructed of 2” nylon webbing
• Provides superior abrasion resistance
• Loop sided interior
• 3-point closure for added retention
1
1
2
3
4
5
6
7
8
9
10
11
12
13
14
DG-DB1
DG-BLTK1
DG-EBC1
DG-MK3C1
DG-ULP1
DG-LXG1
DG-SHC1
DG-RD01
DG-TCC1
DG-DPSR1
DG-DPDR1
DG-DRFH1
DG-SPMC1
DG-UCC1
Duty Belt w / Loop - Available in S, M, L, XL
Belt Keepers
Expandable Baton Carrier
MK3 Chemical Agent Case
Universal Light Pouch -fits 6P, 6R, TL-2, TT-2 and M6
Latex Glove Pouch
Single Handcuff Case
Universal Radio Pouch
Taser Cartridge Case
Double Pistol Magazine Case, Single Row
Double Pistol Magazine Case, Double Row
Double Ring Flashlight / Baton Holder
Single Pistol Magazine Case
Universal Cell Phone Case, Smart Phone
2
9
6
4
10-11
7
13
14
12
3
All Tacprogear Duty Gear is manufactured with the
highest quality molded ballistic nylon and is designed
for comfort and functionality. Available in black only.
5
8
28
www.tacprogear.com
29
POCKETS/POUCHES
Tacprogear 1000D Cordura nylon with double stitched reinforced edging and
reinforced pull tabs—making them the toughest products available.
Pistol Pouches
POCKETS/POUCHES
Staggered Rifle
Magazine Pouch
M4/M16
Single Rifle Magazine
Pouch (M4/M16) with
Universal Pistol
Mag Pocket
P-STGRM1
Available with or without “Grip Tite” retention.
P-RPM1
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
Single Pistol
Magazine Pouch
Double Pistol
Magazine Pouch
P-SPM1
P-DPM1
Rifle Pouches Triple Pistol
Magazine Pouch
P-TPM1
Quad Pistol
Magazine Pouch
P-QPM1
Dimensions:
1.75”D x 4”W x 8.5”H
• Reinforced pull tabs
• Attaches to any MOLLE compatible system
• Hook and loop closures
Dimensions:
1.25” D x 3.75” W x 6” H
Dimensions:
4”W x 5.5”H x 0.5”D
Single Rifle
Magazine Pouch
(M4/M16) Open Top
P-SRMOT1
Fragmentation
Grenade Pouch
P-FRG1
30
Single Rifle
Magazine Pouch
Double Rifle
Magazine Pouch
Triple Rifle
Magazine Pouch
P-SRM1
P-DRM1
P-TRM1
www.tacprogear.com
Dimensions:
2”D x 7.5”W x 9.5”H
Squad Automatic
Weapon Dump Pouch
P-SAW
Dimensions:
1”D x 4”W x 5.5”H
31
POCKETS/POUCHES
BAGS & PACKS
Tacprogear 1000D Cordura nylon with double stitched reinforced edging and
reinforced pull tabs—making them the toughest products available.
POCKETS/POUCHES
• Reinforced pull tabs
• Attaches to any MOLLE compatible system
• Hook and loop closures
Admin/Flashlight
Pouch
Smoke
Grenade
Pouch
P-ADFL1
P-SMRG1
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
Multi Purpose
Flashlight Pouch
P-MPFL1
Dimensions:
1”D x 3.5”W x 7”H
Flashbang Pouch
Single
Flashbang Pouch
Double
Flashbang Pouch
Triple
P-FRBG1
P-DFLBG1
P-TFLBG1
Double
Handcuff
Pouch
P-DBLCF1
Dimensions:
0.5”D x 7.25”W x 8”H
Dimensions:
0.5”D x 7.25”W x 8”H
Dimensions:
1”D x 3”W x 6.75”H
Shotgun Shell
Pouch
18 round
MBITR
Radio Pouch
Small Radio
Pouch
P-MBTR1
P-SMRAD1
P-SHTGN1
Night Vision
Goggle Utility Pouch
Dimensions: 1.25”D x 4.5”W x 7.25”H
32
www.tacprogear.com
Dimensions:
1.5”D x 6.25”W x 7.75”H
P-NVUTL
Dimensions:
1.5”D x 4.5”W x 8”H
Dimensions:
1”D x 3.5”W x 6.25”H
33
POCKETS/POUCHES
BAGS & PACKS
POCKETS/POUCHES
Small General
Purpose Pouch
•1000D Cordura Nylon
•YKK Zippers
•ITW Nexus accessories
Available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
Dimensions: 2.5”D x 10.5”W x 5”H
P-SMGP1
Dimensions: 1.5”D x 10.5”W x 8”H
Gas Mask Pouch
P-GSMK1
• Reinforced pull tabs
• Attaches to any MOLLE compatible system
• Hook and loop closures
Small
Utility Pouch
Dimensions: .5”D x 6.5”W x 6”H
Medium General
Purpose Pouch
P-MDGP1
Dimensions: 2”D x 10.5”W x 7”H
P-UTYSM1
Large
Utility Pouch
P-UTYMD1
Large General
Purpose
Pouch-Upright
P-LGGP1
Dimensions: 2.5”D x 8”W x 9.25”H
34
www.tacprogear.com
Medium
Utility Pouch
P-UTYMD1
Dimensions: 1.5”D x 8.5”W x 5.5”H
Dimensions: 2”D x 8”W x 9.5”H
35
ACCESSORIES
UNIVERSAL TWO-POINT
STRETCH SLING
SINGLE-POINT SLING
S-UTPS1
Made of high-quality nylon webbing, our bungee
sling provides comfort and weapon support.
Compressed tubular nylon sheathing limits
bounce and enhances retention. Removable,
elastic-encased clip allows for quick firearm
attachment. Multiple attachment options available.
S-SPS1
Made of high-quality, elastic nylon webbing.
Flexible, closed-cell neoprene padding.
Non-slip backing keeps sling in place.
Multiple attachment options available.
WEAPONS
CLEANING KIT
AC-WKC1
•OD Nylon Belt Pouch
•.223 Caliber & 7.62mm
•Bore Brush
•Chamber Brush
•Oil Bottle
•Five piece assembly
CARABINER
36
www.tacprogear.com
AC-CAB1
USB FLASH DRIVE
Available in OD Green,
Black, Coyote Tan &
Foliage. (Not for climbing)
AC-USB1
•4 Gigabyte Flash Drive
•Key chain attachment
37
ACCESSORIES
BAGS & PACKS
UNIVERSAL
DROP LEG
HOLSTER
BAGS
ACCESSORIES
& PACKS
H-DLH1
Load Bearing Vests
Tacprogear Load Bearing Vests (LBVs) feature padded non-skid shoulders, zippered interior pockets, and a hydration bladder pouch
(bladder sold separately). Belt loops provide an easy way to secure the LBV to any belt. One Size Fits Most. Available in Coyote Tan and Black.
CROSS DRAW LBV
EOD LBV
TACTICAL ENTRY LBV
GRENADIER LBV
L-CDRH1
L-EOD1
L-TELBV1
L-GLBV1
Includes a universal pistol holster, four
pistol magazine pouches, three rifle
magazine pouches, and one small
utility pouch. Available in right-handed
and left-handed models.
Includes a universal flashlight pouch,
two shotgun shell pouches (18 rounds),
three rifle magazine pouches, one
small utility pouch, and two medium
utility pouches.
Includes a universal flashlight pouch,
two pistol magazine pouches, two rifle
magazine pouches, one small utility
pouch, and two shotgun shell pouches
(18 rounds).
Includes eight 38mm/40mm grenade
pouches, three rifle magazine pouches,
and one small utility pouch.
Fully adjustable drop-leg thigh
holster with quick-release belt
mount. Elastic, rubberized leg
straps for stability and comfort.
Adjustable thumb break with
extra hook and loop retention.
Front-mounted pouch for extra
magazine, knife, or light.
Right and left hand
configurations available.
DROP LEG
GAS MASK
POUCH
H-DLGMP1
•Adjustable quick release buckle closure
•Exterior pouch to hold additional filter/canister
•Fits most gas masks
•Adjustable/removable shoulder strap
•Two rubberized leg straps with quick release buckles
•Non-slip belt loop with heavy-duty hanger strap and quick-release buckle
UNIVERSAL DROP LEG
MUNITIONS POUCH
BDU BELT
H-DLMP1
BT-BDUB
Fully adjustable, ambidextrous
drop-leg thigh munitions pouch.
Elastic, rubberized leg straps for
stability and comfort.
Non-slip belt loop with heavy duty
hanger strap and quick release
buckle. Designed to hold 6
standard less lethal rounds
37/40 mm and/or flash bang
canisters.
Hook and loop adjustment assures accurate sizing. 1 3/4” sizing means
this belt will hold most pouches, belt accessories, and holsters.
One size fits most.
38
MILITARY STYLE WEB BELT
RIGGER BELT
BT-MWB1
BT-URB1
2.25” web belt with side release buckles. No metal. Hook & loop
size adjustment. Size S-up to 32”; M-up to 40”; L-up to 51”
1.75” webbing (7,000 lb tensile strength) with parachute
grade buckles and adapters. Hook and loop closure to secure
the running end. Size S-up to 34”; M-up to 41”; L-41”-51”
www.tacprogear.com
Belts available in: BK-Black • CT-Coyote Tan
OD-OD Green • MC-Multicam®
39
FLASHLIGHTS
FLASHLIGHTS
SRT3
SRT3
Features
550 Lumens
Runtime on lowest
output level: 50h
Beam distance: 115m
1×RCR123 Battery
2×CR123 Batteries
1×AA Battery (included
extender tube)
Cree XM-L2 LED
HD: 25.4mm (1’’)
TD: 24.3mm (0.96’’)
L: 100mm (3.9’’)
W: 73g (2.57oz)
FLASHLIGHTS
Purpose-designed for law enforcement, hunting and tactical applications.
· The world’s first line of flashlights to feature third generation SSR (smart selector ring) technology
· Smoothly and rapidly select brightness levels and function by rotating a smart selector ring
· Utilizes the latest CREE XM-L (XM-L2 T6) LED
· Second generation of ‘Crystal Coating Technology’ along with ‘Precision Digital Optics Technology’ provide extreme reflector performance
Dimensions:
Length: 100mm (3.9”) / 117mm (4.6”)(with AA extension tube)
Head diameter: 25.4mm (1”)
Tube diameter: 24.3mm (0.96”)
Weight: 73g (2.57oz)(without battery) / 87g (3.07oz) (with AA
extension tube) (without battery)
Accessories
Quality holster, removable clip, AA extension tube,
lanyard, spare tail cap button and spare O-ring
550
LUMENS
· High efficiency circuit board provides up to 200 hours runtime on lowest output level
· Equipped with unique multi-colored (red, green and blue) tactical / signaling lights
· Infinite brightness adjustment
· Multi-functional power indicator light displays low battery status
· Patented spring-loaded impact absorption mechanism with reverse polarity protection
· Stainless steel titanium-plated clip
SRT7
Features
960 Lumens
Runtime on lowest
output level: 200h
Beam distance: 308m
1×18650 Battery
2×CR123 Batteries
Cree XM-L2 LED
· Stainless steel retaining ring protects core components from damage
· Toughened ultra-clear mineral glass with anti-reflective coating
· Constructed from aero grade aluminum alloy
· Robust HAIII military grade hard-anodized
SRT6
· Waterproof in accordance with IPX-8
(two meters submersible)
· Purpose-designed for law enforcement, hunting and tactical applications
· The world’s first line of flashlights to feature third generation SSR (smart selector ring) technology
· Smoothly and rapidly select brightness levels and function by rotating a smart selector ring
SRT6
Features
930 Lumens
Runtime on lowest
output level: 200h
Beam distance: 260m
1×18650 Battery
2×CR123 Batteries
Cree XM-L2 LED
Accessories
Quality holster, removable clip, tactical ring,
lanyard, spare tail cap button and spare O-ring
930
www.tacprogear.com
SRT7
Dimensions:
Length: 153mm (6”)
Head diameter: 34 mm (1.34”)
Tube diameter: 25.4mm (1”)
Weight: 145g (5.11oz)(without battery)
LUMENS
40
· Impact resistant to 1.5 meters
960
LUMENS
Dimensions:
Length: 158mm (6.22”)
Head diameter: 40 mm (1.57”)
Tube diameter: 25.4mm (1”)
Weight: 173g (6.1oz)(without battery)
41
FLASHLIGHTS
BAGS & PACKS
BAGS
FLASHLIGHTS
& PACKS
TM15
MH25
HUNTING
KIT
MH25-H
860
MH25 Hunting Kit
Hunting Kit Includes:
MH25
USB cable
NL183 Battery
NFR40 Filter(Red)
NFG40 Filter(Green)
RSW1 Remote Switch
Tactical Ring
Lanyard
Weapon Mount (Different
regions different options)
Holster
LUMENS
•Premium CREE XM-L U2 LED
•Maximum output of 900 lumens
•High efficiency regulation circuit
•Maximum runtime of up to 105 hours
•Intelligent charging circuit with voltage detection charges safely and rapidly
•Integrated charging port is water, dust and impact resistant
•Multiple output modes are conveniently accessed via rapid rotary switch
•User-defined mode provides customized brightness levels plus strobe and SOS modes.
•Intelligent memory function stores preferred brightness setting
•Broad voltage circuit accepts both rechargeable and non-rechargeable Lithium batteries
•Optimized ultra-precise reflector offers a longer beam distance than competing products
Features
860 Lumens
Runtime on lowest
Output level: 28h
Beam distance: 236m
1×1 8650 Battery
2× CR123 Batteries
Cree XM-L U2 LED
Rechargeable
HD: 40mm (1.57’’)
TD: 25.4mm (1’’)
L: 160mm (6.3’’)
W: 145g (5.1oz)
MH40
900
LUMENS
Dimensions:
Length: 243mm (9.6”)
Head Diameter: 60mm (2.36”)
Tail Diameter: 25.4mm (1”)
Weight: 311grams (11oz)(without battery)
42
www.tacprogear.com
•Maximum output of 900 Lumens
•Waterproof in accordance with IPX-8 (submersible to two meters)
•Stainless steel bezel ring protects core components from damage
•Toughened ultra-clear mineral glass with anti-reflective coating
•Constructed from aerospace-grade aluminum alloy
•HAIII military grade hard-anodized
• Reverse polarity protection
• Stainless steel titanium-plated clip
• Anti-rolling design
Features
- At 2450 lumens the TM15 is world’s smallest and brightest rechargeable searchlight
- Utilizes 3 x CREE XM-L LEDs
- Thermal protection circuit prevents overheating
- Compatible with both 18650 Li-ion and CR123 batteries
- Intelligent charging circuit with status detection. Recharge easily, safely and quickly
- Exceptionally long run times using 4 × 18650 Li-ion or 8 × CR123 batteries
- Capable of using 1 × 18650 or 2 x CR123 batteries in emergency situations
- Innovative single button two-stage switch provides a user-friendly interface (Patented)
- Integrated power indicator light displays remaining battery power (Patented)
- Power indicator secondary function displays battery voltage (accurate to 0.1V)
- Coated mineral glass resists scratches
- Aluminum reflector ensures a consistent and powerful beam
- Stainless steel retaining ring protects the core components from damage
- Constructed from aircraft grade aluminum alloy
- HA III Military grade hard-anodized
- IPX-8 standard waterproof (two meters)
TM15
2450
LUMENS
Dimensions:
Length: 158mm (6.22”)
Head diameter: 60 mm (2.36”)
Tube diameter: 50mm (1.96”)
Weight: 447g (15.77oz) (without battery)
Accessories
Charger, quality holster, lanyard, spare O-ring
FLASHLIGHTS
43
MEDICAL
MEDICAL
TRAUMA BAG
INDIVIDUAL
TACTICAL FOLDING LITTER
M-TFL1
M-TBS
The most compact & versatile litter on the market, the Tacprogear Tactical Folding
Litter is designed following US Army requirements.
The Tactical Folding Litter allows transport in restricted compartments. By extending
the handles, the litter becomes 90 inches.
Features:
-Certified Safe-to-Fly U.S. Army Rotary Wing
-Retractable handles
-Hinges lock automatically
-Made of slip-resistant, chemical-resistant rip stop fabric 6 IV-attachment points
-2 patient-securing straps
-U.S. Patents 6,842,923 & 5,598,592, Patent(s) Pending
Dimensions: 2”D x 8”W x 9.5”H
TRAUMA BAG
TEAM PACK
M-TBL
TRAUMA BAG
VEHICLE
Dimensions: 2”D x 10.5”W x 7”H
M-TBM
The Tacprogear medical line includes a wide variety of custom
solutions, available in a myriad of configurations. Each kit is
assembled by hand and made to order.
Dimensions:
Folded with collapsed handles:
Open with collapsed handles:
Open with extended handles:
Weight: 16 lb 6 oz (7.4 kg)
Payload: 1200 lb (544.3 kg)
Ground Clearance: 1.5“
44
www.tacprogear.com
9.5“D x 8.5”W x 20.5“H
6“D x 22.5“W x 78“L
6“D x 22.5“W x 90“L
For more information on building a custom medical solution,
contact Tacprogear today.
Dimensions: 9”D x 11”W x 11”H
45
FOOTWEAR
APPAREL
The Tacprogear Tactical Boot features an authentic athletic fit, feel, and performance,
as well as a shock eliminator pad that reduces heel strike impact for increased comfort.
6” QUICK REACTION FORCE BOOT
F-QRFB2
8” boot
available
with
side zipper
·Full grain leather
·1000 denier nylon upper
·Removable cushion insert
·Shock eliminator system
·Grip traction out sole
APPAREL
BY
When the pressure is on... Don’t sweat it!
Tac Wear’s moisture wicking technology takes care of helping you
focus on getting the job done, by wicking away the perspiration
distraction factor. Whether you’re exposed to extreme heat or are
bundled for extreme cold... our performance products are there to
keep your comfort level at its ultimate.
·Reinforced eyelets
Available in Desert Tan and Black. Whole and half
sizes 7-13.5.
BLACK
8” QUICK REACTION FORCE BOOT
F-QRFB1
·1000 denier nylon upper
·Removable cushion insert
·Shock eliminator system
·Grip traction out sole
A complete line of apparel including:
·Reinforced eyelets
·Speed laces
8” boot
available
with
side zipper
Available in Desert Tan and Black. Whole and half
sizes 7-13.5.
•Pants and shorts
•Polo shirts
•T-shirts
•Outerwear
•Flame resistant garmets
•Coveralls & flight suits
•Underwear
DESERT TAN
46
www.tacprogear.com
47
BAGS & PACKS
BAGS & PACKS
TACPROGEAR
WWW.TACPROGEAR.COM
2
www.tacprogear.com