2015 Spec Catalog

Transcription

2015 Spec Catalog

THIS PAGE INTENTIONALLY LEFT BLANK
LDPI, Inc.
4404 Anderson Drive
Eau Claire, WI 54703
Toll Free: 1-800-854-0021
Fax: 715-726-0112
Web: www.ldpi-inc.com
E-mail: [email protected]
LDPI, Inc. Tech Center
206 Cashman Drive
Chippewa Falls, WI 54729
COMPANY STATEMENT
www.ldpi-inc.com
ABOUT LDPI, INC.
LDPI Biography
LDPI, Inc. has been manufacturing fluoresce t lighting since the early 1980s. From that time, our product line has grown to cover a wide spectrum of applications
LDPI has added fixtures for wet, harsh, hazardous and clean room applications, diversifying our line of paint/powder booth fixtures. LDPI is committed to new
product design and development, strategic partnership development and customer satisfaction.
Products and Services:
LDPI, Inc., located in Eau Claire, Wisconsin, manufactures hazardous location LED and fluorescent lighting fixtures. LDPI provides fixtures
to the nation’s leading paint booth manufacturers, electrical and paint distributors, and end users. LDPI manufactures a broad line of fluorescent lighting products
to serve a wide variety of markets from general industrial to specialized markets that require hazardous rated and explosion proof fluorescent lighting
Markets:
LDPI serves a wide array of industries across the globe. LDPI’s roots in the paint finishing industry have contributed to expansion
into other hazardous and industrial applications. LDPI maintains active representation and distribution in the paint finishing, electrical and industrial lighting
industries, in addition to OEM and catalog markets.
Promotional Efforts:
LDPI maintains an aggressive integrated marketing strategy. Well trained sales engineers work with customers in each key market.
LDPI employs the use of trade journals, government publications and direct mailings to current and potential customers. We also seek out new markets through our
business development initiatives, the internet and trade shows. LDPI’s independent manufacturer representative network maintains a presence and awareness with
the small independent electrical distributors, as well as major electrical houses and niche market distributors. LDPI constantly evaluates its marketing efforts, making
enhancements as needed to increase its account penetration, sales and customer services.
1-800-854-0021
www.ldpi-inc.com
LDPI® is a registered trademark of LDPI, Inc. © LDPI, Inc. 26JAN2016
2
Product design and specifications subject to change without not ce.
Reference www.ldpi-inc.com for the most current version.
CONTENTS
www.ldpi-inc.com
FIXTURES LISTED BY SERIES
240 SERIES (Hazardous)............................................... PAGE: 67
LED FIXTURES
LE101 SERIES (General)............................................... PAGE: 5
241 SERIES (Hazardous - Booth).................................. PAGE: 71
LE121 SERIES (General)............................................... PAGE: 7
260/261 SERIES (Hazardous - Booth)........................... PAGE: 75
LE151 SERIES (General - Booth) .................................. PAGE: 9
280/281 SERIES (Hazardous - Booth)........................... PAGE: 79
LEFP SERIES (General) ................................................ PAGE: 11
384 SERIES (Hazardous)............................................... PAGE: 83
LEINS2 SERIES (General Inspection) ........................... PAGE: 13
400 SERIES (Hazardous - Booth).................................. PAGE: 85
LEINS3 SERIES (General Inspection) ........................... PAGE: 15
400SLB SERIES (Hazardous - Booth) ........................... PAGE: 89
LE201 SERIES (Wet / Damp)......................................... PAGE: 17
440 2x4 SERIES (Hazardous)........................................ PAGE: 91
440 T/THO SERIES (Hazardous - Booth) ...................... PAGE: 93
SLIM LIGHT SERIES (Hazardous - Booth) .................... PAGE: 95
LEVP SERIES (Wet / Damp).......................................... PAGE: 23
CFL SERIES (Hazardous).............................................. PAGE: 99
LE300 SERIES (Marine)................................................. PAGE: 25
380 SERIES (Explosion Proof)....................................... PAGE: 103
240 LED SERIES (Hazardous)....................................... PAGE: 27
241 LED SERIES (Hazardous - Booth) .......................... PAGE: 29
INDUCTION FIXTURES
INDUCTION SERIES (Hazardous)................................. PAGE: 107
260/261 LED SERIES (Hazardous - Booth) ................... PAGE: 31
400 LED SERIES (Hazardous - Booth) .......................... PAGE: 33
HID FIXTURES
HID FL SERIES (Hazardous) ......................................... PAGE: 109
SLIM LIGHT LED SERIES (Hazardous - Booth) ............ PAGE: 35
HID H SERIES (Hazardous)........................................... PAGE: 111
LE401 SERIES (Hazardous) .......................................... PAGE: 37
HID H2 SERIES (Hazardous)......................................... PAGE: 119
LEHL SERIES (Hazardous)............................................ PAGE: 39
HID XP SERIES (Explosion Proof)................................. PAGE: 123
H LED SERIES (Hazardous).......................................... PAGE: 41
HID XP2 SERIES (Explosion Proof)............................... PAGE: 129
380 LED SERIES (Explosion Proof)............................... PAGE: 43
SPECIALTY
SINGLE TASK/INSPECTION CARTS ............................ PAGE: 133
FLUORESCENT FIXTURES
222 SERIES (General) ................................................... PAGE: 45
TASK/INSPECTION CARTS .......................................... PAGE: 134
229H SERIES (General)................................................. PAGE: 49
EXPLOSION PROOF CARTS........................................ PAGE: 135
236 SERIES (General Industrial).................................... PAGE: 51
CUSTOM APPLICATIONS ............................................. PAGE: 137
INS2 SERIES (General - Inspection).............................. PAGE: 53
FIXTURE LENS PROTECTION ..................................... PAGE: 138
INS3 SERIES (General - Inspection).............................. PAGE: 57
240 8 Ft. SERIES (Wet/Damp)....................................... PAGE: 59
INFORMATION
HAZARDOUS LOCATION FUNDAMENTALS................ PAGE: 139
ASK THE EXPERT......................................................... PAGE: 141
GENERAL TERMS AND CONDITIONS OF SALE......... PAGE: 142
LED 5 YEAR WARRANTY ............................................. PAGE: 145
376 SERIES (Wet/Damp) ............................................... PAGE: 63
379i SERIES (Wet/Damp) .............................................. PAGE: 65
3
1-800-854-0021
www.ldpi-inc.com
APPLICATION GUIDE
www.ldpi-inc.com
LISTED BY FIXTURE SERIES
SERIES
ACCESS*
R F O
Class I
Div. 1
Class I
Div. 2
Class II
Class III
Corrosion
Resistant
Paint
Spray
Marine◊
Wet
Damp
Damp
Only
General
Industrial
LE101
•
•
LE121
•
•
LE151
•
•
LEFP
Portable
•
LEINS2
•
LEINS3
•
LE201
•
•
•
LE202
•
•
•
LE203
•
•
•
•
•
•
•
LEVP
LE300
○
240 LED
•
241 LED
•
260 LED
•
261 LED
•
400 LED
•
Slim Light LED
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
LE401
LEHL
•
•
•
•
•
•
•
•
380 LED
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
H LED
•
•
○
•
•
○
•
•
•
•
○
•
222
•
•
229H
•
•
236
•
•
INS2
•
•
•
INS3
•
240 8 Ft.
•
376
•
•
379i
•
•
240
•
241
•
260
•
261
•
280
•
281
•
384
400
Battery
Bkp
#
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
○
•
•
400SLB
•
•
•
•
•
440 2x4
•
•
•
440 T/THO
•
•
•
•
Slim light
•
•
•
•
•
•
CFL
380
•
Induction
•
○
•
•
•
•
•
•
•
•
•
○
•
•
•
•
•
•
•
•
HID FL
•
•
○
•
•
HID H
•
•
•
•
○
•
•
•
•
•
HID H2
•
•
•
○
•
•
HID XP
•
•
•
○
•
•
HID XP2
•
•
•
○
•
•
•
•
Task Cart
•
•
Multi Carts
•
•
•
•
XP Cart
•
*
◊
•
•
•
•
•
Access: R = Rear F = Front O = Open
Marine: # = Inside Drip Proof (UL 1598) ○= Outside Salt Water (UL 1598A)
1-800-854-0021
www.ldpi-inc.com
4
LE101 SERIES
DATE:
PROJECT MGR:
JOB:
LED GENERAL LIGHTING
APPLICATIONS
PN:
General Industrial areas
Warehouses
Task Lighting
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
35° C ambient rating
FEATURES:
20 gauge powder coated white housing
5 Year Warranty
>50,000 Hours
PERFORMANCE:
4 Ft.: 37, 52, 74, and 111 Watts (3900, 5900, 7900, and 11800 lumens)
8 Ft.: 74, 104, 147, and 222 Watts (7800, 11800, 15800, and 23600 lumens)
120-277 Volts
OPTIONS:
Color Temperature:
3500k
4000k
5000k
Supply Connection:
Cord with blunt end
Cord with twist lock plug 120V
Fixture Length
4 Ft.
8 Ft.
Mounting
Surface mount bracket
45° angle mount bracket
Lens:
Clear acrylic
Clear polycarbonate
Diffused polycarbonate
Emergency Battery Backup
Multi-Point Rear Mount
End Mount Brackets
5
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The LE101 Series is an ordinary location LED fixture that is av ilable in 4 Ft. and 8 Ft. lengths.
This fixture is ideal for warehouses, general industrial areas r other locations where task/area lighting is needed.
LE101 SERIES
www.ldpi-inc.com
LE101 - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
LUMENS
39: 3900
59: 5900
79: 7900
118: 11800
VOLTAGE
V1: 120-277V
(driver voltage)
SUPPLY CONNECTION
C: 6 Ft. blunt end cord
CP1: 6 Ft. cord with
120V twist lock plug
CP2: 6 FT cord with
277V twist lock plug
LENGTH
S: 4 Ft.
T: 8 Ft.
LENS
AC: Clear acrylic
PC: Clear polycarbonate
PD: Diffused polycarbonate
Mounting
SM: Surface mount
AM: 45° angle mount
LED COLOR TEMP
3: CCT of 3500K
4: CCT of 4000K
5: CCT of 5000K
OPTIONS
EM: Emergency
battery backup
NOTES
Fixtures supplied with a cord are intended for overhead/ceiling
mounting with electrical outlet mounted directly overhead.
4Ft
Model
Fixture Width
(X)
LE101-39
9-1/8"
# Rows
Nominal Lumen
Output at 5000K
1
3900
8Ft
Wattage
Input Current
(A)
Nominal Lumen
Output at 5000K
Wattage
Input Current
(A)
37
0.31-0.12
7800
74
0.62-0.27
LE101-59
9-1/8"
2
5900
52
0.44-0.19
11800
104
0.88-0.38
LE101-79
9-1/8"
2
7900
74
0.62-0.27
15800
147
1.23-0.53
LE101-118
12-5/8"
3
11800
111
0.93-0.39
23600
222
1.85-0.80
Dimensions (Nominal)
4 Ft. fixture dimensions
7/8" ELECTRICAL
KNOCK-OUTS
ON EACH END
X
48 1/8"
3 3/16"
32"
3 1/2"
4 1/4"
7/8" ELECTRICAL KNOCK-OUTS
8 Ft. fixture dimensions
7/8" ELECTRICAL
KNOCK-OUTS
ON EACH END
X
96 5/16"
3 1/4"
32"
32"
16 3/16"
3 1/2"
4 1/4"
7/8" ELECTRICAL KNOCK-OUTS
1-800-854-0021
www.ldpi-inc.com
6
LE121 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
General Industrial
Warehouse
Task Lighting
Aisle Lighting
Assembly Areas
Commercial Offic
Institutional and School
Medical
CERTIFICATIONS:
UL1598
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
50°C ambient rating
CONSTRUCTION:
18Ga. Steel White Powder Coat
Extruded Aluminum Housing
PERFORMANCE:
See Chart
ELECTRICAL:
120-277 Volts, 50/60Hz
347 Volts, 50/60Hz
OPTIONS:
Dimming
Occupancy Sensor
Emergency Driver
Fixture Color
Wire Guard
6' Cord with Plug
SPECIFICATIONS
The LE121 fixture is a Linear High Bay premium fixture with directional LED elements to adjust and focus the lumen output directly on task areas.
Highly customizable to provide the desired lumen output, color temperature, directional and controllable to suit any general application.
Performance: Lumen output per fixture configurati
4 Ft.
2 Row
3 Row
4 Row
6 Ft.
8 Ft.
Power
Watts
Lumens
Watts
Lumens
Watts
Lumens
P16
128
13710
192
20565
256
27420
P18
144
15258
216
22887
288
30516
P22
182
18700
273
28050
364
37400
P16
192
20565
288
30848
384
41130
P18
216
22887
324
34331
432
45774
P22
273
28000
410
42000
546
56000
P16
256
27420
384
41130
512
54840
P18
288
30516
432
45774
576
61032
P22
364
37400
546
56100
728
74800
Lumen values shown for Polycarbonate (LP) clear lens
7
1-800-854-0021
www.ldpi-inc.com
LE121 SERIES
www.ldpi-inc.com
LE121 - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
POWER
P16
P18
P22
VOLTAGE
U: 120-277V
C: 347V
CCT
35: 3500K
40: 4000K
50: 5000K
LENS
LA: Acrylic (Clear)
LP: Polycarbonate (Clear)
LAF: Acrylic (Frosted)
LPF: Polycarbonate (Frosted)
NOTES
*OS: Occupancy Sensor is factory pre-set for 100% output when turned on. The fixture
will automatically dim to 10% output with no motion in 5 minutes; no motion after 60
minutes, the fixture turns off. Occupancy sensor operation can be field adjusted with
programming remote, (item# 14539) sold separately.
LENGTH
4: 4Ft.
6: 6Ft.
8: 8Ft.
ROWS
2: 2 Row
3: 3 Row
4: 4 Row
MOUNT
CB: Cable Mount (Std)
SM: Surface Mount
OPTIONS
PW: Powder Coat White (Std)
PB: Powder Coat Black
C1: 6' Cord Blunt End
C2: 6' Cord w/120V Plug
C3: 6' Cord w/277V Plug
WG: Wire Guard
EM: Emergency Driver (90 min.)
OS: Occupancy Sensor*
D1: 0-10V Dimming
D2: DALI
22” (559mm)
4 Ft.: 46” (1168mm)
6 Ft.: 68” (1727mm)
8 Ft.: 90” (2286mm)
7” (178mm)
Options
WG: Wire Guard Option
1-800-854-0021
www.ldpi-inc.com
8
LE151 SERIES
DATE:
PROJECT MGR:
JOB:
LED BOOTH LIGHTING
APPLICATIONS
PN:
Paint and Powder Booths
(outside behind glass panel)
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
FEATURES:
20 gauge powder coated white finis
0-10V dimming standard
5 Year Warranty
>50,000 Hours
3500K, 4000K and 5000K LED’s
PERFORMANCE:
2 Ft.: 36, 55 and 73 watt (3400, 5100 and 6800 lumens) at CCT 5000K
120-277 Volts
OPTICS:
Frosted Polycarbonate lens
OPTIONS:
Lengths: 2', 3', 4', 5' and 6'
2, 3, and 4 rows
0° to 45° adjustable modules (adjusts in 15° increments)
Supply Connection:
Cord with Blunt End
Adjustable lens extrusions
9
1-800-854-0021
www.ldpi-inc.com
LED BOOTH LIGHTING
SPECIFICATIONS
The LED, LE151 Series fixture was specifically designed to provide directional light for paint and powder booths. This Ordinary Location fixture
was designed with special extrusions that allow you to aim the LEDs to get the light where it is needed vs. lighting the entire room and places of no
value. This fixture is available in 2', 3', 4', 5 or 6' fixture lengths and is to be installed outside the hazar ous area behind glass panels.
LE151 SERIES
www.ldpi-inc.com
LED BOOTH LIGHTING
LE151 - ___ - ___ - lumens* - ___ - ___ - ___
LENGTH
2: 2 Ft.
3: 3 Ft.
4: 4 Ft.
5: 5 Ft.
6: 6 Ft.
NUMBER OF ROWS
2: 2 rows
3: 3 rows
4: 4 rows
COLOR TEMPERATURE
3: 3500
4: 4000
5: 5000
VOLTAGE
V1: 120-277V
SUPPLY CONNECTION
C: 6 Ft. Blunt End Cord
CP1: 6 Ft. Cord w/120V Twist Lock Plug
CP2: 6 Ft. Cord w/277V Twist Lock Plug
NOTES
*Value is lumens/100; dependent on driver/module combinations defined by Length of Fixture and Number of Rows.
Nominal values are shown in Matrix below. See lumen chart for available configurations
Overall
Length
"B"
25 7/8"
36 7/8"
47 7/8"
58 7/8"
69 7/8"
Length
2 Ft.
3 Ft.
4 Ft.
5 Ft.
6 Ft.
# MTG
Brackets
4
4
4
4
6
"C"
"D"
15"
26"
37"
48"
59"
# Rows
2
3
4
Light Output of Fixture at 5000K CCT
Width
"A"
2 rows
25"
33 1/2"
42"
3 rows
4 rows
29 1/2"
Lumens
Watts
Lumens
Watts
Lumens
Watts
2 Ft.
3400
36
5100
55
6800
73
3 Ft.
5100
55
7600
82
10200
109
4 Ft.
6800
73
10200
109
13600
146
5 Ft.
8500
91
12700
137
17000
182
6 Ft.
10200
109
15300
164
20400
219
3 15/16"
1 3/16"
1 5/16"
SLOT Ø 3/8" x 1"
2 PLACES
"A"
Mounting Bracket
"D"
"D"
"C"
"B"
1-800-854-0021
www.ldpi-inc.com
10
LEFP SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
General Industrial
Commercial Offic
Institutional and School
Medical
CERTIFICATIONS:
UL1598
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
DLC
CONSTRUCTION:
Powder Coated White Aluminum Frame
1x4, 2x2, 2x4 Sizes Available
Low Profile Desig
0-10V Dimming Standard
PERFORMANCE:
80+ CRI
SPECIFICATIONS
LEFP general industrial ceiling mount fixtures are the LED alternat ve to traditional 1x4, 2x2, and 2x4 fluorescent fixture
The thin sheet LED provides a highly uniform, smooth, low glare illumination.
LUMENS
ELECTRICAL:
Power
CCT 3000K
CCT 3500K
CCT 4000K
LEFP 1x4
35
3323lm
3445lm
3491lm
LEFP 2x2
35
3039lm
3228lm
3232lm
LEFP 2x4
48
4465lm
4504lm
4908lm
120-277 Volts, 50/60 Hz
11
1-800-854-0021
www.ldpi-inc.com
LEFP SERIES
www.ldpi-inc.com
LEFP - ___ - ___ - ___ - ___
POWER
35: 35 Watts
48: 48 Watts (2x4 only)
VOLTAGE
U: 120-277V, 50/60Hz
CCT
30: 3000K
35: 3500K
40: 4000K
SIZE
1: 1x4
2: 2x2
4: 2x4
Notes:
Surface mount kit available separately.
Contact factory for availability.
1x4
47.7” (1211.5mm)
47.7” (1211.5mm)
2.3” (58.4mm) 11.7” (297.1mm)
2x4
2x2
2.5”
(63.5mm)
23.7” (601.9mm)
23.7” (601.9mm)
23.7” (601.9mm)
2.3” (58.4mm)
Corner Bracket Detail
1-800-854-0021
www.ldpi-inc.com
12
LEINS2 SERIES
DATE:
PROJECT MGR:
JOB:
LED INSPECTION LIGHTING
APPLICATIONS
PN:
Paint Inspection
Plastic Inspection
Defect Detection
LISTINGS
UL 1598
CSA 22.2 No. 250.0
LM-79, LM-80
FEATURES:
Extruded Aluminum Housing, Powder Coated Black Finish
5 Year Warranty
>50,000 Hours
5000K White LED’s
PERFORMANCE:
2 Ft.: 13 and 21 watt (1500 and 2100 lumens)
120-277 Volts
OPTICS:
Extruded Frosted Acrylic lens specifically
designed for topographic defect detection
OPTIONS:
Lengths:
2', 4' and 8'
Finish:
Black Powder Coat Finish (standard)
White Powder Coat Finish
Powder Coat Special: Customer must specify RAL #
Anodized Black Finish (Minimum order quantities required)
Supply Connection:
Cord with Blunt End
Emergency Battery Back-up
Mounting:
Ceiling/Wall Mount Kit
Cable/Chain Mount Kit
SPECIFICATIONS
The LEINS2 is an LED Inspection lighting fixture that was specifically designed for focusing light in a particular direction for inspection and surface
defect detection applications. This fixture is capable of saving 45% or more energy than the traditional fluorescent fixture, and has an excellent
economic efficiency by greatly reducing maintenance costs while eliminating the need for handling and disposing of hazardous material.
Fixture with optional 6 Ft. cord and plug
LEINS2 Inspection tunnel
Diffuser Detail
13
1-800-854-0021
www.ldpi-inc.com
LEINS2 SERIES
www.ldpi-inc.com
LEINS2 - ___ - ___ - ___ - ___- ___
SOURCE
P13: XX W
P21: XX W
VOLTAGE
V1: 120-277V
LENGTH
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
FINISH
PW: Powder Coat White
PS: Powder Coat Special
(Must specify RAL #)
AB: Anodized Black
OPTIONS
C: Cord with Blunt End
CP1: Cord with 120V Plug
CP2: Cord with 277V Plug
EM: (Emergency Battery Back-up)
Ceiling/Wall Mount Kit (PN: 8171)
Cable/Chain Mount Kit (PN: 8170)
P13
NOMINAL
LUMENS
LUMINAIRE
WATTAGE
INPUT
VOLTAGE
INPUT
CURRENT (A)
2'
1500
13
120-277
0.11/0.05
4'
2630
26
120-277
0.22/0.10
8'
5300
51
120-277
0.43/0.19
P21
NOMINAL
LUMENS
LUMINAIRE
WATTAGE
INPUT
VOLTAGE
INPUT
CURRENT (A)
2'
2100
21
120-277
0.18/0.08
4'
4200
42
120-277
0.35/0.16
8'
8400
84
120-277
0.70/0.31
23 15/16"
23 1/2"
4 11/16"
2 Ft. Fixture
5 9/16"
DIE CAST CONNECTOR
3/8" TRADE SIZE
CARRIAGE SCREW MOUNTING TRACK.
PROVIDED WITH (2) Ø 5/16" X 3/4"
CARRIAGE SCREWS.
MOUNTING CHANNEL
45 15/16"
45 1/2"
4 Ft. Fixture
89 15/16"
END CAP
OPEN END
89 1/2"
8 Ft. Fixture
CORD END
1-800-854-0021
www.ldpi-inc.com
14
LEINS3 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Paint Inspection
Plastic Inspection
Defect Detection
Finesse Decks
Inspection Decks
Polish Decks
LISTINGS/
CERTIFICATIONS:
UL1598
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
Ambient Temperature of 50°C
FEATURES:
20 Gauge Steel Powder Coated Housing
Can be used in conjunction with dimming drivers
LENS:
Tempered Glass or Tempered Striped Glass
Frosted Lens or Frosted Lens Striped
ELECTRICAL:
120-277 Volts, 50/60Hz
OPTIONS:
Stationary Mount Kit (PN 10315)
Pivot Mount Kit (10317)
Flush Mount Kit (10387)
6’ Cord with blunt end
6’ Cord with twist lock plug (must specify 120, 277)
Lumen output per fixture configurati
2 Ft.
Source
1 Row
2 Row
3 Row
4 Row
Watts
P6
4 Ft.
LENS
LG, LF
LGS, LFS
N/A
P9
Watts
6 Ft.
LENS
Watts
8 Ft.
LENS
Watts
LENS
LG, LF
LGS, LFS
LG, LF
LGS, LFS
LG, LF
LGS, LFS
24
2044
1117
36
3065
1675
47
4087
2233
37
3194
1741
56
4790
2611
74
6387
3481
P6
24
2044
1117
47
4087
2233
71
6131
3350
94
8174
4466
P9
37
3194
1741
74
6387
3481
111
9581
5222
148
12774
6962
P6
36
3065
1676
71
6131
3350
107
9196
5025
141
12261
6699
P9
56
4790
2611
111
9581
5222
167
14371
7832
222
19161
10443
P6
48
4087
2234
94
8174
4466
142
12261
6700
P9
74
6387
3481
148
12774
6962
222
19161
10443
N/A
Example: A 4 Ft. fixture with 3 rows of LEDs with a P9 power source will eliver 9581 lumens with a LG or LF type lens
LEINS3__P9 - 4 -3 - V1 - D1 - C1 - LG - RS - 5 - PB
15
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The LEINS3 Series is a must have when the finish of any surface counts! This fixture is constructed from 20 gauge cold rolled steel and has a powder
coated finish. This fixture is designed to create a well defined lamp image using light and dark contrasts that cause defects in the paint show to show
for ease of detection and repair. This fixture is available as a 2’, 4’, 6', and 8’ fixture and has the flexibility to allow the use of 1, 2 or 3 rows of LED’s.
There are a multitude of lens, cord and housing color options in this fixture Series
LEINS3 SERIES
www.ldpi-inc.com
LEINS3__ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
SERIES
Blank: Std
W: Wide Housing
(2 row only)
LENGTH
2: 2 Ft.
4: 4 Ft.
6: 6 Ft.
8: 8 Ft.
SOURCE
P6
P9
ROWS
1 (No 2 Ft.)
2
3
4 (No 8 Ft.)
VOLTAGE
V1 120-277V
DIMMING
Blank: No Dimming
D1: Step Dimming
(Not available for all sizes)
D2: 0-10V
D3: DALI
(Not available for all sizes)
CORD
Blank: No Cord
C: 6 Ft. Blunt End Cord
C1: 6 Ft. Cord with
120V Twist Lock Plug
C2: 6 Ft. Cord with
277V Twist Lock Plug
REFLECTOR
RS: Aluminum Specular Reflecto
RDW: Soft Diffuse White Reflecto
RW: Reflective White Reflect
LENS
LF: Tempered Glass Lens with Frosted Insert
LFS: Tempered Glass Striped Lens with Frosted Insert
LG: Tempered Glass Lens
LGL: Tempered Glass Lens with Linear Prismatic Insert
LGS: Tempered Glass Striped Lens
CCT
3: 3000K
4: 4000K
5: 5000K
FINISH
PW: Powder Coat White
A
B
3.2
C
Overall
Width B
Fixture
Length
Overall
Length A
Mounting
Center C
ROW
2
28
23.75
1
10
NA
4
50
47.75
2
17.5
20.5
6
72
70
3
25
NA
8
94
70
4
32.5
NA
1-800-854-0021
www.ldpi-inc.com
16
LEINS3
LEINS3W
LE201 SERIES
DATE:
PROJECT MGR:
JOB:
LED WET/DAMP LIGHTING
APPLICATIONS
PN:
Industrial Areas
Machining Areas
Parking Garages
Wash and Prep Bays
LISTINGS
UL 1598 Wet / Damp
CSA 22.2 No.250.0
UL 8750
CSA 22.2 No. 250.13
IP66
FEATURES:
Die-cast aluminum housing with a white powder coat finis
Acrylic and polycarbonate lenses
Specular aluminum reflecto
One piece silicone gasket
Stainless steel Mounting brackets (included)
Canted LED Mounting
PERFORMANCE:
Wattages:
P37: 37W (3000 lumens)
P57: 57W (4100 lumens)
P79: 79W (5250 lumens)
P100: 100W (6050 lumens)
Voltages:
120-277 Volts
OPTIONS:
Lens:
SPECIFICATIONS
The LE201 is a wet/damp listed fixture featuring a die cast alu inum housing and an acrylic or polycarbonate lens.
With an IP66 rating, this wide distribution fixture is ideal fo wash and prep bays, parking garages, and industrial areas.
V-shaped clear acrylic patterned lens
V-shaped frosted acrylic patterned lens
V-shaped clear polycarbonate patterned lens
Supply Connection:
Cord with blunt end
Cord with IP rated twist lock plug 120V
Cord with IP rated twist lock plug 277V
Mounting brackets in place
Specular aluminum reflecto
17
1-800-854-0021
www.ldpi-inc.com
LE201 SERIES
www.ldpi-inc.com
LE201 - ___ - ___ - ___ - ___ - ___ - ___ - ___
SOURCE
P37: 37W
P57: 57W
P79: 79W
P100: 100W
LED COLOR TEMP
50: CCT of 5000K
VOLTAGE
V1: 120-277V
LENS
VAP: V-shaped clear acrylic
patterned lens
VAF: V-shaped frosted acrylic
patterned lens
VPC: V-shaped clear
polycarbonate
patterned lens
SUPPLY
C: Cord with blunt end
CP1: Cord with IP rated
twist lock plug 120V
CP2: Cord with IP rated
twist lock plug 277V
MOUNT
M: Surface mount bracket
Uses standard snap on
stainless steel brackets
included
FINISH
W: White powder coat
B: Black powder coat
R: Raw aluminum
26 1/16"
LED MODUAL
7 13/16"
REFLECTOR
LED MODUAL
LENS
6 3/4"
7 1/16"
3 5/8"
2"
CORD GRIP
ONLY ON FIXTURE IF ORDERED
WITH THE CORDED OPTION
CAST ALUMINUM HOUSING
ENCLOSURE WITH COOLING FINS
STAINLESS STEEL
MOUNTING BRACKETS
5/16"
Ø 3/4" CONDUIT KNOCK-OUT HOLES
IN BOTH ENDS OF CASTING
16"
Ø 1/4" X 5/8" SLOT
1-800-854-0021
www.ldpi-inc.com
18
LE202 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Shown with acrylic frosted lens
Parking Garages, Tunnels
Locker Rooms, Hospitals,
Schools
Water Treatment Plants
Kitchens, Showers
Paper Mills
Food Processing
Marinas/Offshore Facilities
Breweries and Bottling
Livestock Containment
LISTINGS:
UL 1598A Marine Inside
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
NEMA 4X
NSF (enclosure only) High Pressure tested at 1500psi
FEATURES:
Fiberglass: 5VA UL rated
5 Year Warranty
>50,000 hours
PERFORMANCE:
2 Ft.: 42 watts (3850 Lumens) at CCT 5000K
4 Ft.: 84 watts (7700 Lumens) at CCT 5000K
120-277 Volts
0-10V dimming (standard)
OPTICS:
Acrylic ribbed frosted lens
Acrylic frosted lens
OPTIONS:
45° angle mount bracket
Stainless steel latches
Emergency battery back-up
19
SPECIFICATIONS
Suitable for interior or exterior applications. This LED, lightweight, vapor tight, nonmetallic fixture is ideal for corrosive or wet/damp environments. The LE202
fixture features a fiberglass housing with an acrylic frosted or acrylic frosted ribbed lens, a continuous gasket design, and comes standard with surface mount
brackets. The LE202 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or fumes are possible.
The LE202 is resilient against corrosion and weathering and is available in 2' and 4' fixture lengths
1-800-854-0021
www.ldpi-inc.com
LE202 SERIES
www.ldpi-inc.com
LE202- ___ - ___ - ___ - ___ - ___ - ___ - ___
LUMENS
38: 3850 Lumens (2 Ft.)
77: 7700 Lumens (4 Ft.)
(Nominal Lumens)
LED COLOR TEMP
3: CCT of 3500K
4: CCT of 4000K
5: CCT of 5000K
MOUNT
SM: surface mount bracket
AM: 45° angle mount
VOLTAGE
V1: 120-277V
LENGTH
2: 2 Ft.
4: 4 Ft.
LENS
ARF: Acrylic ribbed frosted lens
AF: Acrylic frosted lens
OPTIONS
SL: Stainless steel latches
EM: Emergency battery backup
Notes:
For chemical resistance information
please see website
ARF: Standard
B
A
Acrylic ribbed frosted lens depth: 2.13”
Acrylic frosted lens depth: 3.5”
C
D
5.75”
PART #
LE202-38
LE202-78
A
B
C
D
27.25”
51.75”
4.25”
4.25”
6.75”
6.75”
7.33”
7.33”
“B” measurement: with acrylic ribbed frosted lens is 4.25"
“B” measurement with acrylic frosted lens is 5.75”
Std. Latch
Detail
Mounting
•
•
•
•
Offers a huge advantage over more traditional enclosures.
Durable, stainless steel Mounting hardware.
No drilling necessary for the housing for installation.
Installation time is dramatically reduced, providing lower installation costs.
OPTIONAL Mounting
45° Mounting bracket kit
P/N 5102 - Kit includes:
(2) 45° brackets
(2) 5081 brackets
STANDARD Mounting BRACKET Kits
Included with each fixtur
P/N 6686: Two brackets per kit. 1 kit needed per fixture
3 9/32”
45°
Standard Mounting bracket
1-800-854-0021
www.ldpi-inc.com
45° Mounting option
20
LE203 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Locker Rooms, Hospitals,
Schools
Kitchens, Showers
Paper Mills
Food Processing
LISTINGS:
UL 1598A
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
NEMA 4X
NSF (enclosure only) High Pressure Tested at 1500psi
30°C Ambient Rating
FEATURES:
5 Year Warranty
>50,000 hours
PERFORMANCE:
2 Ft.: 42 watts (3850 Lumens) @ CCT 5000K
120-277 VAC, 50/60Hz
0-10V Dimming (Standard)
OPTICS:
Acrylic Ribbed Frosted Lens
Acrylic Frosted Lens
OPTIONS:
45° Angle Mount Bracket
Stainless Steel Latches
21
SPECIFICATIONS
Suitable for interior or exterior applications. This LED, lightweight, vapor tight, nonmetallic fixture is ideal for corrosive or wet/damp environments. The LE203
fixture features a fiberglass housing with an acrylic frosted or acrylic frosted ribbed lens, a continuous poured in place gasket design, and comes standard
with surface mount brackets. The LE203 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or
fumes are possible. The LE203 is resilient against corrosion and weathering and is available in 2', 4', and 8' fixture lengths
1-800-854-0021
www.ldpi-inc.com
LE203 SERIES
www.ldpi-inc.com
LE203- ___ - ___ - ___ - ___ - ___ - ___ - ___
LUMENS
38: 3850 Lumens (2 Ft.)
77: 7700 Lumens (4 Ft.)
154: 15400 Lumens (8 Ft.)
(Nominal Lumens)
LED COLOR TEMP
3: CCT of 3500K
4: CCT of 4000K
5: CCT of 5000K
MOUNT
SM: Surface Mount Bracket
AM: 45° Angle Mount
VOLTAGE
V1: 120-277V
LENGTH
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
LENS
ARF: Acrylic Ribbed Frosted Lens
AF: Acrylic Frosted Lens
OPTIONS
SL: Stainless Steel Latches
Notes:
For chemical resistance information
please see website
ARF: Standard
B
A
Acrylic ribbed frosted lens depth: 2.13”
Acrylic frosted lens depth: 3.5”
C
D
5.75”
PART #
LE203-38
LE203-77
LE203-154
A
B
C
D
27.25”
51.75”
100.19”
4.25”
4.25”
4.25”
6.75”
6.75”
6.75”
7.33”
7.33”
7.33”
Std. Latch
Detail
“B” measurement: with acrylic ribbed frosted lens is 4.25"
“B” measurement with acrylic frosted lens is 5.75”
Mounting
•
•
•
•
OPTIONAL Mounting
45° Mounting bracket kit
P/N 5102 - Kit includes:
(2) 45° brackets
(2) 5081 brackets
P/N 6686: Two brackets per kit. 1 kit needed per fixture
3 9/32”
45°
Standard Mounting bracket
1-800-854-0021
www.ldpi-inc.com
22
LEVP SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Waste Management
Steel Mills
Power Plants
Food Processing Plants
Pulp and Paper Mills
Foundry Operations
Chemical Plants
Oil Refinerie
Offshore Platforms
CERTIFICATIONS:
UL1598 Wet / Damp
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
LM-79, LM-80
IP65
CONSTRUCTION:
Powder Coated Cast Aluminum
Multiple Conduit Entries
Suitable For Inverted Mounting
Low Profile Ceiling Moun
PERFORMANCE:
14W, 1123lm @5000K (Clear Low Profile
14W, 890lm @5000K (Frosted Globe & Guard)
65 CRI
CCT 5300K
50,000+ Hour Life
ELECTRICAL:
120-277VAC, 50/60Hz
23
SPECIFICATIONS
LEVP vapor proof fixtures are designed to replace traditional 100 w tt incandescent and 23 watt CFL type fixtures
The LEVP features long lasting LED construction and are suitable for wet and damp locations where moisture is present.
1-800-854-0021
www.ldpi-inc.com
LEVP SERIES
www.ldpi-inc.com
LEVP - ___ - ___ - ___ - ___ - ___
POWER
14: 14 Watts
VOLTAGE
U: 120-277V, 50/60HZ
CCT
53: 5300K
OPTICS
L1: Clear Low Profile Polycarbonat
L2: Frosted Low Profile Polycarbonat
G1: Clear Glass Globe & Guard
G2: Frosted Glass Globe & Guard
MOUNT
C: Ceiling
P: Pendant
W: Wall
Ceiling Mount
1-800-854-0021
www.ldpi-inc.com
Pendant Mount
24
Wall Mount
LE300 SERIES
DATE:
PROJECT MGR:
JOB:
LED MARINE LIGHTING
APPLICATIONS
PN:
Marine/Coastal Facilities
Chemical Plants
Petroleum Refinerie
Power Plants
Waste Water Treatment
Parking Garages
Car Washes
Tunnels
High Bay / Low Bay Areas
LISTINGS
UL 1598
CSA 22.2 No. 250.0
UL 1598A Marine Outside
UL 8750
CSA 22.2 No. 250.13
IP66
NEMA 4X
40°C ambient rating (107 watt)
50°C ambient rating (55 and 82 watts)
FEATURES:
Copper-Free Cast Aluminum housing
Captive Stainless Steel Fasteners and Insert
5 Year Warranty
>120,000 Hours (Rated Lifetime Projection L70)
PERFORMANCE:
P5, 55 Watt (6400 Lumens), P8, 82 Watts (9000 Lumens), P11, 107 Watts (11000 Lumens)
120-277 Volt
277-480 Volt (P5, 55 Watts only)
OPTICS:
T1: Type I
T2: Type II
T3: Type III
Type V (Frosted film, narrow 16° FWHM, medium 70° FWHM
and wide 120° FWHM)
OPTIONS:
Mounting:
Ceiling 1/2” and 3/4” hub, Pendant 3/4” hub, Yoke 1/2” hub, or Wall 1” hub
Straight Stanchion 1 1/4” and 1 1/2” or Angled Stanchion 1 1/4” and 1 1/2”
Supply Connection:
Cord with blunt end
Cord with IP Rated twist lock plug 120V
Cord with IP Rated twist lock plug 277
Dimming
Wire Guard
Color Temperature: 4000K, 5000K (standard option) or 7000K
Finish: Black, Gray, or White Powder Coat
TAMPER RESISTANT MACHINE SCREWS
Equivalent HID (Metal Halide) Watts*
Metal Halide
55
100
82
150
107
250
*For reference only.
.ies files available upon request
DRIVER COMPARTMENT ACCESS
LED
25
1-800-854-0021
www.ldpi-inc.com
LED MARINE LIGHTING
SPECIFICATIONS
The LE300 Series is an energy efficient alternative to Metal Halide and High Pressure Sodium HID fixtures. This copper-free, cast aluminum fixture
is designed for indoor and outdoor applications including: marine, high bay, low bay, and flood applications. This fixture incorporates 24 high power
LED's with multiple optical distribution patterns and comes standard with a CCT of 5000K.
LE300 SERIES
www.ldpi-inc.com
LED MARINE LIGHTING
LE300 - ___ - ___ - ___ - ___ - ___
SOURCE*
P11 (107 Watts)
P8 (82 Watts)
P5 (55 Watts)
VOLTAGE
V1 120-277V
V2 277-480V
(55 Watt only)
MOUNT
F1: Ceiling 1/2” hub
F3: Pendant 3/4" hub
F4: Yoke mount 1/2" hub
X1: Wall mount 1” hub
X2: Stanchion 1 1/4” threaded
X3: Angled stanchion 1 1/4” threaded
OPTICS
T1: Type I
T2: Type II
T3: Type III
F: Type V frosted3
N: Type V narrow 16° FWHM3
M: Type V medium 70° FWHM3
W: Type V wide 120° FWHM3
OPTIONS
C: Cord with blunt end1, 2
CP1: Cord with IP Rated twist lock plug 120V1
CP2: Cord with IP Rated twist lock plug 277V1
D: Dimming (0-10V dimming driver)
(Can not be ordered with a corded option)
G: Lens guard
4K: CCT of 4000K
7K: CCT of 7000K
PB: Black powder coat finis
PW: White powder coat finis
PG: Gray powder coat finis
(Blank): Natural unpainted finis
Notes:
* Nominal Watts
1
Marine Indoor Drip-Proof Type Listing: Cord options available for ceiling, pendant and yoke mount only.
2
Marine Outdoor Type Listing: Blunt end cord option for yoke mount only.
3
Optic Types F, N, M and W are available for the Type V optics only.
F1 and F2 Ceiling Mount
F3 Pendant Mount
(Ceiling spacers provided)
12”
12”
5 3/4"
4"
Ø 3/8" X 5/8"
SLOT
5/8"
2"
Ø 9/16"
12”
4 3/4"
Ø 3/8"
TYP
12”
F4 Yoke Mount
6 3/16"
3/4" NPT
5 1/8"
5 1/8"
1/2" & 3/4" NPT (2 PLCS)
F1 & F2 MOUNT
X2-X5 Wall/Stanchion Mount
X1 Mount
3 1/4"
1" NPT 2 PLCS
(X1 MOUNT)
Ø 13/32"
TYP
7 9/16"
2 7/16"
1.25" OR 1.5" NPT
STRAIGHT OR ANGLED AT 25°
X2-X5 MOUNT
1-800-854-0021
www.ldpi-inc.com
26
240 LED SERIES
DATE:
LED HAZARDOUS LIGHTING
PN:
PROJECT MGR:
APPLICATIONS
JOB:
Chemical Plants
Paper Mills
Tunnels
Water Treatment
Prep, Inspection, Sanding
Machining Areas
Coal & Dust Storage
CERTIFICATIONS:
Class I D2 Groups A,B,C,D.
Class II D2 Groups F,G
Class III
UL844
CSA 22.2 No. 137.0
UL1598 Wet / Damp
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
IP 65
40° C Ambient Rating
CONSTRUCTION:
18Ga. Steel, White Powder Coat
Hinged Front Door
Hinged Ballast Tray
Tempered Glass Lens
Pendant Mount - Standard
Feed Though Wiring - Standard
PERFORMANCE:
Lamp
Qty.
Source
(Ballast Factor)
Average
System Watts
Initial
Lumen Output
Color Temperature
(CCT)
2 Lamp
L: Low
S: Standard
H: High
25
29
37
2800, 2900
3200, 3300
3700, 4000
4000K, 5000K
4000K, 5000K
4000K, 5000K
3 Lamp
L: Low
S: Standard
H: High
37.5
43.5
55.5
4200, 4350
4800, 4950
5550, 6000
4000K, 5000K
4000K, 5000K
4000K, 5000K
4 Lamp
L: Low
S: Standard
H: High
50
58
74
5600, 5800
6400, 6600
7400, 8000
4000K, 5000K
4000K, 5000K
4000K, 5000K
5 Lamp
L: Low
S: Standard
H: High
62.5
72.5
92.5
7000, 7250
8000, 8250
9250, 10000
4000K, 5000K
4000K, 5000K
4000K, 5000K
6 Lamp
L: Low
S: Standard
H: High
75
87
111
8400, 8700
9600, 9900
11100, 12000
4000K, 5000K
4000K, 5000K
4000K, 5000K
ELECTRICAL:
120-277VAC, 50/60Hz
347VAC, 50/60Hz
27
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 240 LED Series is a very versatile fixture for use in hazardous environments It is an ideal fixture for industrial applications, wet locations and task lighting.
Optional adjustable mounting brackets allow for precise aiming in multiple angles suitable for most applications. With multiple hub locations, the 240 LED
Series can meet most of your wiring needs. LED lamps included.
240 LED SERIES
www.ldpi-inc.com
240 LED - ___ - ___ - ___ - ___ - ___ - ___
SOURCE
L: Low Ballast Factor
S: Standard Ballast Factor
H: High Ballast Factor
CCT
4: 4000K
5: 5000K
LAMP QTY
2L: 2 Lamps
3L: 3 Lamps
4L: 4 Lamps
5L: 5 Lamps
6L: 6 Lamps
VOLTAGE
347: 347V
UNV1: 120-277V
HUB
TS: Top and Side Hubs
OPTIONS
SS: Stainless Steel Housing
AM: Adjustable Mounting Brackets
for Surface Mounting
CB: Cable Mount: (Includes 5' Cable)
WH: 3 Wire Whip
F: Fusing
W: Wire Guard
P: Polycarbonate Lens
A: Acrylic Lens
Operating Temperature codes Based on 40° C Ambient
Fixture
Class I, D2
Groups A, B, C & D
Class II D2 Groups
F&G
Class III
240 LED
T5=100°C
T4A=120°C
T4A=120°C
1/2 NPT BOTH ENDS
1/2 NPT HUBS
HINGED REFLECTOR
BRACKETS FOR
OPTIONAL
MOUNTING KITS
INTEGRATED ACCESS
DOOR HINGE
HINGED
DOOR
FRAME
"A"
ROTARY
DRAW
LATCHES
51 1/2"
53 1/8"
5 5/16”
"A":
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
Adjustable Mounting Brackets for Surface Mounting
Accessories (Ordered Separately, Field Installed)
1-800-854-0021
www.ldpi-inc.com
Accessory
Item #
Chain Mount Kit
7979
Vertical Mounting
Bracket Kit
10357
28
Description
241 LED SERIES
DATE:
PROJECT MGR:
JOB:
LED BOOTH LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Prep Areas
Inspection Areas
Sanding Areas
Laboratories
LISTINGS:
UL 844
CSA 22.2 No. 137.0
UL 1598 Wet / Damp, Paint Spray
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
Class I
D2 Groups A,B,C,D T3C 160°C
Class II
D2 Groups F,G
T3C 160°C
FEATURES:
Piano hinged rear access fixture for easy relampin
40% + energy savings compared to F32 T8 lamps
50,000 hours
8 Ft. wire whip
PERFORMANCE:
L: Low Ballast Factor Ballast - 50 watts (5600 - 5800 lumens)
S: Standard Ballast Factor Ballast - 58 watts (6400 - 6600 lumens)
H: High Ballast Factor Ballast 74 watts (7400 - 8000 lumens)
120 - 277 Volt
OPTIONS:
4000K or 5000K LEDs
Mounting Kits - ordered separately
LED BOOTH LIGHTING
SPECIFICATIONS
The 241 Series is an ideal product for a multitude of areas including Paint Spray Booths, Prep Areas, Inspection Areas, Sanding or Machining Areas, even where
Grain or Coal Dust may be a concern. This 4 lamp 4’ fixture is available with T8 LED replacement lamps. This fixture series can be built with low, standard and
high ballast factor ballasts and is available with 4000 and 5000K LEDs. This series carries multiple listings from UL and ETL for Class I Div. 2 and Class II Div.
2 applications. Must be mounted hinge side up. LED Lamps and 8 Ft. wire whip included.
Piano hinged
rear access
29
1-800-854-0021
www.ldpi-inc.com
241 LED SERIES
www.ldpi-inc.com
LED BOOTH LIGHTING
390___ - LED - ___ - ___
SERIES
241: 4 lamp fixtur
SOURCE
L: Low ballast factor
S: Standard ballast factor
H: High ballast factor
CCT
4: 4000K
5: 5000K
Input Voltage
(VAC)
Input Current
(A)
Input Frequency
(Hz)
Source
(Ballast Factor)
Luminaire
Wattage (W)
Nominal
Lumen Output
Color Temperature
(CCT)
390241-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390241-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390241-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
Model
/8”
5-1
52 1/2”
1/8
”
15 1/8”
14 1/2”
53
1-800-854-0021
www.ldpi-inc.com
30
260/261 LED SERIES
LED BOOTH LIGHTING
DATE:
PROJECT MGR:
JOB:
Model 260: Front and rear access
APPLICATIONS
PN:
Model 261: Rear access only
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
Class I D2 Groups A,B,C,D T3C 160°C
T3C 160°C
FEATURES:
20 gauge steel construction with white power coat
which creates a durable, highly reflective fini
Housing styles for either front or rear accessibility in the
Series 260, or rear access only in the Series 261
40% + energy savings compared to F32 T8 fluorescent lamp
50,000 hours
8 Ft. wire whip
PERFORMANCE:
L: Low Ballast Factor Ballast - 50 watts (5600 - 5800 lumens)
S: Standard Ballast Factor Ballast - 58 watts (6400 - 6600 lumens)
H: High Ballast Factor Ballast 74 watts (7400 - 8000 lumens)
120 - 277 Volt
OPTIONS:
4000K or 5000K LEDs
Panel stiffener kit #1704 (fits 18 gauge panels only
NOTE:
Normally open magnetic switches are intended to be used to trigger a relay
(furnished by others) which disables the paint system. Because of the small
capacity of the switch a solid state relay is recommended. It may be desired
by others to utilize a separate power supply to segregate the relay
(furnished by others) from the lighting power supply.
The magnetic switch IS NOT designed to directly control light operation!
The magnetic switch is rated for 10 watts resistive at a maximum of 300 VAC.
CAUTION:
Overloading the switch circuits WILL cause failure.
LDPI, Inc. recommends having a certified electrician/engineer r view
loads to ensure that overloading of switch does not occur.
Interlock Microswitch
Model 260
31
1-800-854-0021
www.ldpi-inc.com
LED BOOTH LIGHTING
SPECIFICATIONS
The 260/261 LED Series is a product designed specifically for Paint Spray Booths. These 4 lamp 4’ fixtures are available with LED T8 replacement lamps. These
fixtures can be built with low, standard and high ballast factor ballasts and are available with 4000 and 5000K LEDs. The 260 LED Series allows for both Front and
Rear access using a paint spray cutoff switch when the front door frame is opened. The 261 Series is a rear access only fixture and does not require paint spray cutoff.
Both units carry multiple listings from ETL for Class I Div. 2 and Class II Div. 2 applications. Must be mounted hinge side up. LED lamps and 8 Ft. wire whip included.
260/261 LED SERIES
www.ldpi-inc.com
LED BOOTH LIGHTING
390___ - LED - ___ - ___
SERIES
260: 4 lamp inside and rear access fixtur
261: 4 lamp rear access fixtur
Models
390260/261-LED
SOURCE
CCT
4: 4000K
5: 5000K
Input Voltage
(VAC)
Input Current
(A)
Input Frequency
(Hz)
Source
(Ballast Factor)
Luminaire Wattage
(W)
Nominal
Lumen Output
Color Temperature
(CCT)
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390260/261-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390260/261-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
DIMENSIONS (Fixture dimensions are nominal. Cut-out dimensions are actual.)
53
/4”
49
13/
16”
53
”
1/4
Rear Access Panel
Models 260 and 261
18 3/8”
21 3/4”
7 5/8”
51 1/4”
12”
12”
12”
7 5/8”
3 13/16”
HOLE DETAIL
CUT LIGHT HOLE
19 5/8” X 51 1/4”
3/8” TYP.
19 5/8”
12”
3 13/16”
5/16” Dia.
12 Holes
1-800-854-0021
www.ldpi-inc.com
32
400 LED SERIES
DATE:
PROJECT MGR:
JOB:
LED BOOTH LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
Class I D2 Groups A,B,C,D T3C 160° C
T3C 160° C
NFPA 33
FEATURES:
Piano hinged rear access fixture for easy relampin
20 gauge steel construction with white powder coat
50,000 hours
8 Ft. wire whip
LENS:
3/16” clear tempered glass
PERFORMANCE:
L: Low Ballast Factor Ballast 25 - 75 watts (2800 - 8700 lumens)
S: Standard Ballast Factor Ballast 29 - 87 watts (3200 - 9900 lumens)
H: High Ballast Factor Ballast 37 - 111 watts (3700 - 12000 lumens)
120 - 277 Volts
OPTIONS:
4000K or 5000K LEDs
Lens and fixture preservation: lens film and blast booth lens c er
33
LED BOOTH LIGHTING
SPECIFICATIONS
The 400 Series Rear Access product is an ideal paint spray booth product when a rear access fixture is desired. The 400 Series is also a vapor proof product with
an ETL listing of Class I Division 2 rating. This 4’ fixture is available with 2, 4 and 6 lamp options, can be built with low, standard and high ballast factor ballasts
and is available with 4000 and 5000K LED lamps. LED lamps and 8 Ft. wire whip Included.
1-800-854-0021
www.ldpi-inc.com
400 LED SERIES
www.ldpi-inc.com
LED BOOTH LIGHTING
390___ - LED - ___ - ___
SERIES
421: 2 lamp fixtur
441: 4 lamp fixtur
461: 6 lamp fixtur
SOURCE
CAN SHIP VIA UPS
2 and 4 Lamp ONLY
CCT
4: 4000K
5: 5000K
LED LAMPS
INCLUDED
Input Voltage
(VAC)
Input Current
(A)
Input Frequency
(Hz)
Source
(Ballast Factor)
Luminaire
Wattage (W)
Nominal
Lumen Output
Color Temperature
(CCT)
390421-LED
120-277
0.21 - 0.09
50/60
L: Low
25
2800, 2900
4000K, 5000K
390421-LED
120-277
0.24 - 0.10
50/60
S: Standard
29
3200, 3300
4000K, 5000K
390421-LED
120-277
0.31 - 0.13
50/60
H: High
37
3700, 4000
4000K, 5000K
390441-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
Models
390441-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390441-LED
120-277
0.62 - 0.27
50/60
H: High
74
7400, 8000
4000K, 5000K
390461-LED
120-277
0.63 - 0.27
50/60
L: Low
75
8400, 8700
4000K, 5000K
390461-LED
120-277
0.73 - 0.32
50/60
S: Standard
87
9600, 9900
4000K, 5000K
390461-LED
120-277
0.93 - 0.40
50/60
H: High
111
11100, 12000
4000K, 5000K
C
MOUNTING
DIMENSIONS
FIXTURE
DIMENSIONS
3 1/2”
MODEL
A
B
390421 10 1/2” 12 1/2”
390441 15 1/2” 17 1/2”
390461 20 1/2” 22 1/2”
D
C
D
50 1/4” 52 3/8”
50 1/4” 52 3/8”
50 1/4” 52 3/8”
E
10 3/4”
15 3/4”
20 3/4”
F
7”
12”
17”
50 1/4”
1 1/8”
A
E
B
16”
16”
HOLE DETAIL (4 FT. FIXTURES)
5/16” TYP
1/2” TYP
1 7/8”
Ø 5/16” DIA.
12 Holes
F
1 7/8”
50 7/8”
400 LED Rear Access Series Mounting
BOOTH PANEL
MOUNTING CUT-OUT
GASKET MATERIAL
1/4-20 UNC X 3/4”
FASTENERS
P/N 1705
PAINT SPRAY
BOOTH PANEL
CAULK CONSISTENTLY
AROUND THE ENTIRE
PERIMETER OF THE
FIXTURE AFTER
MOUNTING.
3 1/2” + 1/16”
INSTALLED
BOOTH
EXTERIOR
INSTALLATION
FASTENER
1/4-20 UNC X 3/4”
FRONT OF FIXTURE
1/2 NPT CONDUIT HUB
ON BOTTOM. (NOT SHOWN)
1-800-854-0021
www.ldpi-inc.com
16”
34
SLIM LIGHT LED
DATE:
PROJECT MGR:
JOB:
LED BOOTH LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
Control Rooms for
Drilling Rigs
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
CSA 22.2 No. 250.13
Class I D2 Groups A,B,C,D
FEATURES:
20 gauge steel construction with white powder coat
Hinged front lens assembly for convenient access
2 1/4” depth minimizes the space needed in the paint spray booth for the fixtur
50,000 hours
8 Ft. wire whip
LENS:
PERFORMANCE
L: Low Ballast Factor Ballast 25 - 75 watts (2800 - 8700 lumens)
S: Standard Ballast Factor Ballast 29 - 87 watts (3200 - 9900 lumens)
H: High Ballast Factor Ballast 37 - 111 watts (3700 - 12000 lumens)
120 - 277 Volt
OPTIONS:
4000K or 5000K LEDs
Lens and fixture preservation: lens film and blast booth lens c er
NOTE:
CAUTION:
LDPI, Inc. recommends having a certified electrician/engineer
review loads to ensure that overloading of switch does not occur.
35
1-800-854-0021
www.ldpi-inc.com
LED BOOTH LIGHTING
SPECIFICATIONS
The Slim Light LED Series features a 20 Ga. white powder coat steel housing that is only 2 ¼” thick. The Slim LED Series is available as a 4’ fixture with 2, 4 and
6 LED lamp options, it can be built with low, standard and high ballast factor ballasts and is available with 4000 and 5000K LEDs. This series provides a hinged
front door lens assembly with a paint spray cutoff switch when opened. This fixture must be installed with the hinge side up when bein horizontally mounted.
LED lamps and 8 Ft. wire whip included.
SLIM LIGHT LED
www.ldpi-inc.com
LED BOOTH LIGHTING
390___ - LED - ___ - ___
SERIES
420: 2 lamp fixtur
440: 4 lamp fixtur
460: 6 lamp fixtur
Models
SOURCE
CCT
4: 4000K
5: 5000K
CAN SHIP VIA UPS
2 and 4 Lamp ONLY
Additional packaging
required.
LED LAMPS
INCLUDED
Input Voltage
(VAC)
Input Current
(A)
Input Frequency
(Hz)
Source
(Ballast Factor)
Luminaire
Wattage (W)
Nominal
Lumen Output
Color Temperature
(CCT)
120-277
0.21 - 0.09
50/60
L: Low
25
2800, 2900
4000K, 5000K
390420-LED
390420-LED
120-277
0.24 - 0.10
50/60
S: Standard
29
3200, 3300
4000K, 5000K
390420-LED
120-277
0.31 - 0.13
50/60
H: High
37
3700, 4000
4000K, 5000K
390440-LED
120-277
0.42 - 0.18
50/60
L: Low
50
5600, 5800
4000K, 5000K
390440-LED
120-277
0.48 - 0.21
50/60
S: Standard
58
6400, 6600
4000K, 5000K
390440-LED
120-277
0.62 - 0.28
50/60
H: High
74
7400, 8000
4000K, 5000K
390460-LED
120-277
0.63 - 0.27
50/60
L: Low
75
8400, 8700
4000K, 5000K
390460-LED
120-277
0.73 - 0.32
50/60
S: Standard
87
9600, 9900
4000K, 5000K
390460-LED
120-277
0.93 - 0.40
50/60
H: High
111
11100, 12000
4000K, 5000K
21
/4”
C D
TYPE
MODEL
A
B
C
D
E
F
4 FT. 2 LAMP
4 FT. 4 LAMP
4 FT. 6 LAMP
390420
390440
390460
9 1/2”
14 1/2”
19 1/2”
13”
18”
23”
50”
50”
50”
51-7/8”
51-7/8”
51-7/8”
10 3/4”
15 3/4”
20 3/4”
7”
12”
17”
4 FOOT SLIM LIGHT LED
50 1/4”
*
A
B
* 1/2" NPT
HUB LOCATIONS
NOTE: LIGHT FIXTURE’S GLASS FRAME EXTENDS 3/8” INTO BOOTH
WHEN MOUNTED IN BOOTH PANEL.
1 1/8”
16”
16”
16”
E
5/16” TYP
1/2” TYP
50 7/8”
1 7/8”
5/16” DIA.
F
12 Holes
1 7/8”
Slim Light LED Series Mounting
EXTERIOR BOOTH PANEL
Mounting TEMPLATE
FOAM GASKETING
FIXTURE FLANGE
1/4 - 20 UNC X 1”
FASTENERS
P/N 1705
PAINT
SPRAY
BOOTH
PANEL
INSTALLATION
FASTENER
1/4-20 UNC X 3/4”
2-1/4” + 1/16”
INSTALLED
INTERIOR
BOOTH
PANEL
GLASS ASSEMBLY FRAME
FASTENER
3/8” (INSTALLED)
1/2 NPT
CONDUIT HUB
1-800-854-0021
www.ldpi-inc.com
GLASS
36
LE401 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Chemical Plants
Petroleum Refinerie
Power Plants
High Bay / Low Bay Areas
LISTINGS
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
UL 8750
CSA 22.2 No. 250.13
T3C 160°C
T5 100°C
Class III
IP 66
NEMA 4X
FEATURES:
Copper-Free Cast Aluminum housing
Captive Stainless Steel Fasteners and Insert
5 Year Warranty
>120,000 Hours (Rated Lifetime Projection L70)
PERFORMANCE:
P5, 55 Watt (6400 Lumens), P8, 82 Watts (9000 Lumens), P11, 107 Watts (11000 Lumens)
120-277 Volt
277-480 Volt (P5, 55 Watts only)
OPTICS:
T1: Type I
T2: Type II
T3: Type III
Type V (Frosted film, narrow 16° FWHM, medium 70° FWHM, and wide 120° FWHM)
OPTIONS:
Mounting:
Ceiling 1/2” and 3/4” hub, Pendant 3/4” hub, Yoke 1/2” hub,
or Wall 1” hub
Straight Stanchion 1 1/4” and 1 1/2”
or Angled Stanchion 1 1/4” and 1 1/2”
Supply Connection: Cord with Blunt End
Dimming
Wire Guard
Color Temperature: 4000K, 5000K (standard option) or 7000K
Finish: Black, Gray, or White Powder Coat
TAMPER RESISTANT MACHINE SCREWS
Equivalent HID (Metal Halide) Watts*
Metal Halide
55
100
82
150
107
250
*For reference only.
.ies files available upon request
DRIVER COMPARTMENT ACCESS
LED
37
1-800-854-0021
www.ldpi-inc.com
LED HAZARDOUSL LIGHTING
SPECIFICATIONS
The LE401 Series is an energy efficient alternative to hazardous location Metal Halide and High Pressure Sodium HID fixtures. This copper-free,
cast aluminum fixture is designed for indoor and outdoor applications including: hazardous, marine, high bay, low bay, and flood applications. This
fixture incorporates 24 high power LED's with multiple optical istribution patterns and comes standard with a CCT of 5000K.
LE401 SERIES
www.ldpi-inc.com
LE401 - ___ - ___ - ___ - ___ - ___
SOURCE*
P11 (107 Watts)
P8 (82 Watts)
P5 (55 Watts)
VOLTAGE
V1 120-277V
V2 277-480V
(55 Watt only)
MOUNT
F3: Pendant 3/4" hub
F4: Yoke mount 1/2" hub
X1: Wall mount 1” hub
OPTICS
T1: Type I
T2: Type II
T3: Type III
F: Type V frosted**
N: Type V narrow 16° FWHM**
M: Type V medium 70° FWHM**
W: Type V wide 120° FWHM**
OPTIONS
C: 3 Ft. cord with blunt end (F4 mount only)
D: Dimming (0-10V dimming driver)
(Can not be ordered with a corded option)
G: Lens guard
4K: CCT of 4000K
7K: CCT of 7000K
PB: Black powder coat finis
PW: White powder coat finis
PG: Gray powder coat finis
(BLANK): Natural unpainted finis
Notes:
*Nominal Watts
**Optic Types F, N, M and W are available for the Type V optics only.
F1 and F2 Ceiling Mount
F3 Pendant Mount
(Ceiling spacers provided)
12”
12”
5 3/4"
4"
Ø 3/8" X 5/8"
SLOT
5/8"
2"
Ø 9/16"
12”
4 3/4"
Ø 3/8"
TYP
12”
F4 Yoke Mount
6 3/16"
3/4" NPT
5 1/8"
5 1/8"
1/2" & 3/4" NPT (2 PLCS)
F1 & F2 MOUNT
X2-X5 Wall/Stanchion Mount
X1 Mount
3 1/4"
1" NPT 2 PLCS
(X1 MOUNT)
Ø 13/32"
TYP
7 9/16"
2 7/16"
1.25" OR 1.5" NPT
STRAIGHT OR ANGLED AT 25°
X2-X5 MOUNT
1-800-854-0021
www.ldpi-inc.com
38
LEHL SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Chemical Plants
Fuel Depots
Petrochemical Refinerie
Power Plants
Boiler Rooms
Fabrication Warehouses
Grain Processing
LISTINGS:
CI D2 Grp A,B,C,D
CII D2 Grp F,G
UL844
UL1598 Wet Locations
IP66
FEATURES:
Powder Coated Gray Cast Aluminum
Surge Protection 15kV
Operating Temperature -25°C to 50°C* (-40°C with 347 - 480V supply)
Type V 120° Optic
PERFORMANCE:
80 Watt (8,400 lumen)
110 Watt (11,550 lumen)
140 Watt (14,000 lumen)
170 Watt (17,000 lumen)
CCT 5000K
>50,000 hours
ELECTRICAL:
120-277 Volts
347-480 Volts
Operating Temperature Codes
Based on 40° C Ambient
Operating Temperature Codes
Based on 50° C Ambient
Model
CI D2
Grp A,B,C,D
CII D2
Grp F,G
CI D2
Grp A,B,C,D
CII D2
Grp F,G
LEHL-80
T5=100°C
T4A=120°C
T5=100°C
T4=135°C
LEHL-110
T4A=120°C
T4A=120°C
T4=135°C
T4=135°C
LEHL-140
T4=135°C
T3C=160°C
T4=135°C
T3B=165°C
LEHL-170
T3C=160°C
T3C=160°C
T3C=160°C
T3B=165°C
39
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The LEHL LED Series is designed to be an energy efficient solution to c nventional hazardous location light fixtures
This compact, light-weight fixture has an aluminum housing, multiple lumen options, a CCT of 5000K and is available with a variety of mounting options.
LEHL SERIES
www.ldpi-inc.com
LEHL - ___ - ___ - ___ - ___
POWER
80: 80 Watts
110: 110 Watts
140: 140 Watts
170: 170 Watts
VOLTAGE
U: 120-277V, 50/60Hz
H: 347-480V, 50/60Hz
CCT
50: 5000K
HOUSING
CWS: Ceiling/Wall/Stanchion*
PSC: Pendant/Swivel/Clamp (3/4" NPT)**
Notes:
When ordering a CWS housing, a mount must be
ordered separately to complete the fixture
See table below.
CWS HOUSING MOUNT (Required)*
(Ordered Separately - Field Installed)
HLC: Ceiling Box
HLW4: Wall Mount 40°
HLS92: Stanchion 90° 1-1/2"
PSC HOUSING MOUNT (Option)**
(Ordered Separately - Field Installed)
HLSW: Swivel/Clamp (Yoke)
Dimensions - Inches (Nominal)
* CWS Housing Mount (Required) - Ordered Separately, Field Installed.
Housing
Item #
CWS
HLC: Ceiling Box
8.9”
14.2”
14.0”
9.8”
14.0”
12.9”
9.5”
14.6”
3.9”
16.5”
3.9”
9.5”
15.7”
1-800-854-0021
www.ldpi-inc.com
** PSC Housing Mount (Option) - Ordered Separately, Field Installed.
Housing
Item #
PSC
HLSW: Swivel/Clamp (Yoke)
40
H LED SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Chemical Processing
Oil/Gas
Water Treatment
CERTIFICATIONS:
Class I D2, Groups A,B,C,D
Zone 2, Groups IIC, IIB, IIA
Class II D1 and D2, Groups E,F,G
Class III
UL1598A For Marine Locations
NEMA 4X
UL844
CSA C22.2 No 137
CONSTRUCTION:
Cast, copper-free aluminum construction for high strength
Light weight and corrosion resistance
Powder coat finis
Corrosion-resistant stainless steel hardware
ELECTRICAL:
AC input: 120 to 277 Volts 50/60Hz; option: 347 / 480 Volts 50/60Hz
Soft-start; in-rush maximum current; high power factor: 0.9
Protection: AC over-voltage; over-temperature; load short-circuit
Temperature Code
Model
AC Power (W)
Lumen
Lm/W
40° C
CI D2
55° C
CI D2 and CII
CI D2
CI D2 and CII
DL005
45
5800
129
T5
T4A
T5
T4
DL007
58
7100
122
T5
T4A
T5
T4
DL010
88
10100
144
T4A
T4A
T4A
T4
DL015
122
15600
128
T4
T3C
NA
NA
DL017
131
17800
135
T4
T3C
NA
NA
DL020
166
20400
123
T3C
T3C
NA
NA
41
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
LED hazardous duty area lighting fixtures are constructed and t sted to function in adverse environments.
Rely on LDPI to safely illuminate your work area even under the harshest conditions.
H LED SERIES
www.ldpi-inc.com
DL - 0 - ___ - E - ___ - ___ - ___ - ___ - ___
LUMENS
05: 5,800 lumens, 45W
07: 7,100 lumens, 58W
10: 10,100 lumens, 88W
15: 15,600 lumens, 122W
17: 17,800 lumens, 131W
20: 20,400 lumens, 166W
EU - ___ - ___
SPECIAL OPTIONS
T: HazCote® Custom
Anti-corosion Coating
(Consult factory)
G: Grey color option
VOLTAGE
UN: Universal 120 to 277V 50/60Hz
(Voltage includes 208V, 220V, 240V etc.)
UN2: Universal 347/480 Volts 50/60Hz
(Not available for DL017 and DL020)
GUARD
Blank: No Guard
C: Cast Aluminum Guard
L: Polymeric Guard
DRIVER HOUSING
0: Standard Housing
S: Standard Housing with
stainless-steel insert
OPTICS
TG: Thermal Shock-Resistant Glass Globe
R1: Type I Glass Refractor Globe
R3: Type III Glass Refractor Globe
R5: Type V Glass Refractor Globe
LIGHT DISTRIBUTION OPTIONS
I3: Interior Reflector 35° Beam Angle*
(*): DL005, DL007, DL010 only
MOUNT
A2: 3/4” Cone Top Pendant
A3: 1” Cone Top Pendant
B2: 3/4” Wall Mount
B3: 1” Wall Mount
C2: 3/4” Ceiling Mount
C3: 1” Ceiling Mount
HV1: HazVertor™ Ring - CI, D2
HV2: HazVertor™ Ring - CII, D1
L4: 1 1/4” Straight Stanchion
P2: 3/4" Pendant Mount
P3: 1" Pendant Mount
S4: 1 1/4” 25° Angle Stanchion
Blank: No mount (To replace existing fixture
13 3/8"
14 7/8"
13 3/8"
18 11/32"
CONE PENDANT
16 3/4"
14 1/2"
CEILING PENDANT
1-800-854-0021
www.ldpi-inc.com
WALL MOUNT
15 3/4"
16 1/8"
15 3/16"
25° STANCHION MOUNT
42
13 3/8"
15 3/16"
STRAIGHT STANCHION
14 3/4"
HAZVERTOR™ RINGER
380 LED SERIES
DATE:
PROJECT MGR:
JOB:
LED EXPLOSION PROOF LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Marine Outdoor
Chemical Plants
Drilling Rigs
Refinerie
Grain Elevators
Coal Storage
CERTIFICATIONS:
Class I D1 Groups C,D
Class II D1 Groups E,F,G
Class III
Class I and II Simultaneous Presence
Zone 1, Group IIA, IIB
UL844
CSA 22.2 No. 137.0
CONSTRUCTION:
Factory sealed, cast aluminum, one piece painted aluminum refle tor
4 Ft. Length
Borosilicate Glass Tube Lens
UL1598A Marine Outside
UL1598 Wet / Damp, Paint Spray
CSA 22.2 No. 250.0
UL8750
CSA 22.2 No. 250.13
NEMA 3, 4X, 7CD, 9EFG
NFPA 33
NEC Article 516
40° C Ambient Rating
PERFORMANCE:
Lamp
Qty.
Source
(Ballast Factor)
Average
System Watts
Initial
Lumen Output
Color Temperature
(CCT)
2 Lamp
L: Low
S: Standard
H: High
25
29
37
2800, 2900
3200, 3300
3700, 4000
4000K, 5000K
4000K, 5000K
4000K, 5000K
3 Lamp
L: Low
S: Standard
H: High
37.5
43.5
55.5
4200, 4350
4800, 4950
5550, 6000
4000K, 5000K
4000K, 5000K
4000K, 5000K
4 Lamp
L: Low
S: Standard
H: High
50
58
74
5600, 5800
6400, 6600
7400, 8000
4000K, 5000K
4000K, 5000K
4000K, 5000K
ELECTRICAL:
120-277V, 50/60Hz
347V
380 LED - ___ - ___ - ___ - ___ - ___ - ___
SOURCE
L: Low Ballast Factor
S: Standard Ballast Factor
H: High Ballast Factor
CCT
4: 4000K
5: 5000K
LAMP QTY
2L: 2 Lamps
3L: 3 Lamps
4L: 4 Lamps
LENGTH
4: 4 Ft.
43
VOLTAGE
347: 347 Volts
UNV1: 120-277 Volts
OPTIONS
P: Polycarbonate Shield
WG: Stainless Steel Guard
1-800-854-0021
www.ldpi-inc.com
LED EXPLOSION PROOF
SPECIFICATIONS
The 380 LED Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to
wire the fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution.
The 380 LED Series is available in 4’ length for 2, 3, & 4 lamp combinations. LED lamps included.
380 LED SERIES
www.ldpi-inc.com
LED EXPLOSION PROOF LIGHTING
Operating Temperature codes Based on 40° C Ambient
Fixture
Class I, D1
Groups C & D
Class I, D2
Groups A, B, C & D
Class II, D1
Groups E, F & G
Class II, D2
Groups E, F & G
Class III
Class I and II
Simultaneous Presence
380 LED
T6=85°C
T6=85°C
T4=135°C
T4=135°C
T4=135°C
T4=135°C
Dimensions, Weights, and Mounting Options
2 Lamp
45° HUB
7 1/4”
STD
HUB
45° HUB
7 1/4”
48 7/8”
Fixture Weight
Shipping Weight
2 Lamp
40 Lbs.
43 Lbs.
3 Lamp
45 Lbs.
52 Lbs.
4 Lamp
80 Lbs.
84 Lbs.
9”
90° HUB
53 5/8”
3 Lamp
7 1/4”
45° HUB
STD
HUB
Mounting Options
Ordered Seprately
Item #
Description
Wall/Ceiling Kit
4401
For 2 or 3 Lamp
Wall/Ceiling Kit
4400
For 4 Lamp
Must be factory installed
13”
45° HUB
7 1/4”
48 7/8”
90° HUB
53 5/8”
4 Lamp
45° HUB
7 1/4”
18 3/4”
STD
HUB
Drop Mount Kit
4405
2 or 3 Lamp
4403
4 Lamp
45° HUB
7 1/4”
48 7/8”
90° HUB
53 5/8”
Options
Factory Item #
WG: Stainless Steel Guards
Not for use in paint spray applications
4211
2 Lamp 4 Ft.
4557
3 Lamp 4 Ft.
4211, (2) required
4 Lamp 4 Ft.
4209
2 Lamp 4 Ft.
4497
3 Lamp 4 Ft.
4209, (2) required
4 Lamp 4 Ft.
P: Polycarbonate Shields
(+/- 1/16” thickness)
1-800-854-0021
www.ldpi-inc.com
Description
44
222 SERIES
DATE:
PROJECT MGR:
JOB:
Standard Fixture
PN:
Fixture shown with optional wide reflector " A"
APPLICATIONS
GENERAL INDUSTRIAL LIGHTING
Assembly Areas
General Industrial
Task Lighting
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
FEATURES:
Open industrial fixtur
Sturdy 20 gauge steel white powder coat housing
Tool-less access for ease of maintenance
ELECTRICAL:
Utilizes 32, 44, and 54 Watt 4 Ft. lamps.
Available in universal, 120, 277 and 347 Volts electronic ballasts
(Other voltages available, consult factory)
OPTIONS:
EM: Emergency battery backup ballast
120 or 277V - MUST SPECIFY
SR: Specular reflecto
SL: Slots for up-light
NA: Narrow angle reflecto
WA: Wide angle reflecto
SPECIFICATIONS
Fabricated with a white powder coat finish, the 222 Series is ideal for industrial lighting needs. The 222 Series uses an optional 5 Ft. 3-wire whip which
reduces installation time. Available in T8, T8HO or T5HO lamps. Lamps not included.
CH: Chain hanging kit
CM: Cable mount kit
Standard Fixture
Fixture with Narrow Angle Reflector "NA
45
Fixture with Wide Angle Reflector " A"
1-800-854-0021
www.ldpi-inc.com
222 SERIES
www.ldpi-inc.com
222 - ___ - ___ - ___ - ___ - ___
CAN SHIP VIA UPS
LAMP TYPE
T5HO: 54W
T8: 32W
T8HO: 44W
LAMP QTY
2L: (4 or 8 Ft. lamps)
3L: (4 Ft. lamps)
4L: (4 Ft. lamps
T5 and T5HO only)
6L: (4 Ft. lamps)
8L: (4 Ft. lamps
T5 and T5HO only)
Notes:
T8HO is only available in a 2 lamp configuratio
8 Ft. lamp fixtures only available in 2 lamp configurati
6 lamp and 8 lamp configuration only available in 8 Ft. fixtur
LAMP LENGTH
4: 4 Ft.
8: 8 Ft.
VOLTAGE
UNV1: 120-277V
(T5HO and T8 only)
120: 120V
277: 277V
UNV2: 347-480V
(T5HO only)
OPTIONS
EM: Emergency battery
back up ballast
SL: Slots for uplight
SR: Specular Reflecto
NA: Narrow Angle Reflecto
WA: Wide Angle Reflecto
CM: Cable Mount (incl. 5 Ft. cable)
CH: Chain Hang Kit
LAMPS SOLD SEPARATELY
(Multiple voltages available, consult factory)
(Consult factory for lead time on non-stock products.)
5 11/16"
1 13/16"
5 1/2"
222-T5HO-2L-4-UNV1
STANDARD BALLAST COVER
7 3/4"
3 1/2"
5 1/2"
222-T5HO-2L-4-UNV1-NA
NARROW ANGLE REFLECTOR
10"
3 1/2"
5 1/2"
222-T8-3L-4-UNV1-WA
WIDE ANGLE REFLECTOR
1-800-854-0021
www.ldpi-inc.com
46
222 SERIES
www.ldpi-inc.com
222-T5HO-2L-4-UNV1
LIGHT FIXTURE
CH: Chain Mount Hangar Kit
TOOL-LESS
ACCESS FASTENER
24" JACKCHAIN
QTY (2)
HANGING BRACKET
QTY (2)
(T5HO: 46" )
(T8/T8HO/T12: 48")
Ø7/8" ELECTRICAL
KNOCK-OUT
CM: Cable Mount Hangar Kit
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
5FT NO. 2
LOOP HANGING CABLE
QTY (2)
222-T8-2L-8-UNV1-WA
96W T8 SLIMLINE LIGHT FIXTURE
HANGING BRACKET
QTY (2)
ACCESS FASTENERS
95 7/8"
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
222-T8-6L-8-UNV1-WA
LIGHT FIXTURE
ACCESS FASTENERS
(T8/T8HO/T12 95 7/8" )
(T5HO 91 7/8")
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
Ø7/8" ELECTRICAL
KNOCK-OUT
BOTH ENDS
47
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
48
229H SERIES
DATE:
PROJECT MGR:
JOB:
PN:
APPLICATIONS
Paint Booths
(Outside behind glass panel)
General Industrial
Task Lighting
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
FEATURES:
Heavy duty open industrial fixtur
Hinged ballast plate allows for the fixture to be lamped prior o installation
Sturdy 20 gauge steel with a white powder coat finis
ELECTRICAL:
Utilizes 32, 44, and 54 watt 4 Ft. lamps
Available in universal, 120, 277 and 347 Volts electronic ballasts
(Other voltages available, consult factory)
OPTIONS:
A: Pattern 12 acrylic diffuser available in 32W T8 only
WG: Zinc plated wire guard (factory installed)
2 or 3 Lamp options.
(lamps sold separately)
Chain hanging kit - #3218
WG: Zinc plated wire guard option
49
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
Fabricated with a white powder caot finish the 229H Series is ideal for a variety of industrial lighting needs. A unique hinged ballast cover provides
easy access to internal wiring and ballast for installation or service without the need to remove lamps. The 229H uses a 5 Ft. 3-wire whip which
reduces installation time by not having to open the fixture. Available in T8, T8HO, or T5HO lamps. Lamps not included.
229H SERIES
www.ldpi-inc.com
229H - ___ - ___ - ___ - ___
CAN SHIP VIA UPS
LAMP TYPE
T5HO: 54W
T8: 32W*
T8HO: 44W
VOLTAGE
120-277: 120-277V
(T5HO and T8 ONLY)
120: 120V
277: 277V
347-480: 347-480V
(T5HO ONLY)
LAMP QTY
4L: 4 lamp
3L: 3 lamp
2L: 2 lamp
*Normally stocked fixtur
(Consult factory for lead time on non-stock products.)
OPTIONS
WG: Zinc plated wire guard**
A: Pattern 12 acrylic diffuser***
EM: Emergency battery
back up ballast
**Must be installed at the factory
***Diffuser is only available in 32W T8
14
”
1/2
48 1/4” nominal
4”
Ballast plate is hinged
for easy access
Wire whip
not shown
Mounting
PN: 3218 Chain hang kit
24” Chain piece (Qty. 2)
Chain hanger
bracket (Qty. 2)
229H Light fixtur
1-800-854-0021
www.ldpi-inc.com
50
236 SERIES
DATE:
PROJECT MGR:
JOB:
PN:
APPLICATIONS
Warehouses
Gymnasiums
Ice Rinks
Manufacturing Facilities
Big-Box Retailers
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
FEATURES:
Rigid one piece 20 gauge steel with pre-painted white enamel fi ish
Twist lock lamp holders
High lumen to watt ratio
Higher mortality curve than HID for higher levels of illumination over time
ELECTRICAL:
Available in 32 and 54 watts with T8 and T5HO lamps
Voltages of 120-277 and 347-480
HOUSING:
Rigid one piece formed housing constructed of 20 gauge steel
with a white powder coat finis
Specular Reflector with 91% Reflectivi
OPTIONS:
Cable mount kit
Cord and plug
Specular reflecto
Wire guard
Occupancy sensor
Acrylic lens
WHITE REFLECTOR
SPECULAR REFLECTOR
51
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 236 Series is a well designed fixture for Open Industrial High Bay applications. This fixture features a white powder coat steel housing with a
white powder coat finish option, and sports either a white or specular reflector system for the perfect lighting distribution for your application. The
fixture is available in a 2, 4, 6 or 8 lamp configuration, usin T8 or T5HO lamps. Lamps not included.
236 SERIES
www.ldpi-inc.com
236 - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T8: 32W
T8HLO: 32W
T5HO: 54W
LAMP QTY
2L: 2 Lamp
4L: 4 Lamp
6L: 6 Lamp
8L: 8 Lamp
LENGTH (Ft.)
4: 50” (nominal)
VOLTAGE
UNV1: 120-277V 50/60Hz
120: 120V 60Hz
277: 277V 60Hz
UNV2: 347/480V
50/60 Hz - T5HO ONLY
OPTIONS
CA5: Cable Mount 60” Nominal
CP6: 120: 6’ Cord, L5-15P
CP6: 277: 6’ Cord, L7-15P
HB: Specular Reflecto
WG: Wire Guard (for complete kit see chart*)
OC: Occupancy Sensor
(used with a program start ballast)
A: Acrylic Lens (for complete kit see chart**)
DIMENSIONS (Nominal)
Y-FIT
Toggled end
Fixing gripple
60” nominal
60° MAX
46 1/8”
120V Plug (L5-15P) or
277V Plug (L7-15P)
4 3/16”
5 1/2”
Occupancy
Sensor
6 Ft. cord
2L = 9 1/8”
4L = 16 3/8”
6L = 23 5/8”
8L = 30 7/8”
Wire Guard
Zinc plated
6 Lamp shown
T8 and T8HO = 48 1/4”
T5HO = 46 1/4”
MODEL
236-T5HO-2L
236-T8-2L
236-T5HO-4L
236-T8-4L
236-T5HO-6L
236-T8-6L
236-T5HO-8L
236-T8-8L
WIRE GUARD KIT* ACRYLIC LENS KIT**
8182
8180
8183
8181
8178
8176
8179
8177
7238
8090
7060
8138
8186
8184
8187
8185
2L = 8 1/2”
4L = 15 3/4”
6L = 23”
8L = 30 1/4”
3 5/8”
1-800-854-0021
www.ldpi-inc.com
52
INS2 SERIES
DATE:
PROJECT MGR:
JOB:
INSPECTION LIGHTING
PATENT PENDING
APPLICATIONS
PN:
Paint Inspection
Plastic Inspection
Defect Detection
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
HOUSING:
Black powder coat housing and end caps
6063 T6 Extruded aluminum
Custom powder coat colors or anodized finishes available upon r quest
REFLECTOR:
Symmetrical
91% reflectanc
DIFFUSER:
Extruded acrylic, UV stabilized
Proprietary surface finish for inspection and defect detection pplications
END CAPS:
Die formed aluminum
HARDWARE:
Zinc plated steel
MOUNTING:
Integrated channel on back side of housing allows for surface,
pendant, cable, or any other type of desired Mounting.
(Mounting hardware NOT included)
ORIENTATION:
Horizontal, vertical, angular, lamp up, or lamp down
HUB SIZE:
1/2” on one end standard
ELECTRICAL:
Available in 17, 32 and 59 watt with T8 lamps
Voltages: 120, 277, 120/277 and 347
BALLAST:
Instant start standard
HOLDERS:
Tombstone style, twist lock lamp holders
OPTIONS:
Cord and plug (specify voltage)
2 Ft. fixture with optional 6 Ft. cord and plu
53
Diffuser Detail
1-800-854-0021
www.ldpi-inc.com
INSPECTION LIGHTING
SPECIFICATIONS
INS2 fixture is specific lly designed for inspection and defect detection applications. The proprietary refractor on the INS2 fixture creates distinct luminance
edges on painted surfaces which significan ly increases the visibility of topographic defects such as dirt in paint, runs, sags, craters, etc. This fixture is
available in multiple lengths and can be installed as a stand-alone unit or in a continuous row up to 16’ long. It features a black powder coated housing and
end caps with an integrated channel on the backside of the housing to allow for surface, pendant, cable or various other Mounting options. Lamps included.
INS2 SERIES
www.ldpi-inc.com
INSPECTION LIGHTING
INS2 - ___ - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T8: 17W (2 Ft.)
32W (4 Ft.)
59W (8 Ft.)
LAMP QTY
1L: 1 Lamp
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
VOLTAGE
120: 120V
277: 277V
UNV1: 120/277V
347: 347V
LENGTH (Ft.)*
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
12: 12 Ft.
16: 16 Ft.
Notes:
UNV1 (Universal voltage) is standard on fixtures without cords
When ordering fixture with a cord (CP6) specify the voltage acc rdingly.
Standard plug is a NEMA rated straight blade.
FINISH
AB: Anodized Black
CORD/PLUG
C6: 6 Ft. Cord no plug
CP6: 6 Ft. Cord with plug
Available Lamp Configuration
Nominal Fixture Length
QTY of Lamps
Nominal Lamp Length
2 Ft.
1
24 in.
4 Ft.
1
48 in.
8 Ft.
1
96 in.
8 Ft.
2
48 in.
12 Ft.
3
48 in.
16 Ft.
2
96 in.
16 Ft.
4
48 in.
2 Ft. Fixture
26 5/16"
25 1/8"
4 11/16"
5 17/32"
INS2 Inspection tunnel.
5/16"-18 CARRIAGE
SCREW MOUNTING TRACK
4 Ft. Fixture
50 5/16"
49 1/8"
MOUNTING CHANNEL
5 17/32"
END CAP
8 Ft. Fixture
98 5/16"
97 1/8"
OPEN END
5 17/32"
CORD END
1-800-854-0021
www.ldpi-inc.com
54
INS2 SERIES
www.ldpi-inc.com
INSPECTION LIGHTING
CEILING / WALL MOUNT
(OPTIONAL) KIT# 8171
DIRECT MOUNT
(STANDARD)
CABLE / CHAIN MOUNT EYELET
5/16" -18 LOCKING NUT (STANDARD)
5/16" FLAT WASHER (STANDARD)
1/2" WASHER TO BE USED
WHEN MOUNTING TO
MATERIAL 3/32" THICK
OR LESS
CABLE / CHAIN MOUNT
(OPTIONAL) KIT# 8170
55
1-800-854-0021
www.ldpi-inc.com
INS2 and INS3 SERIES
www.ldpi-inc.com
INSPECTION LIGHTING MOUNTING
INSPECTION FIXTURE MOUNTING
4 Ft. fixture top horizontal moun
8 Ft. fixture top horizontal moun
INS2 with 8 Ft. fixture top horizontal moun
application requirements.
FIXTURE
Tunnel provides visual angles from all sides and can be designed with combinations of 4 Ft. and 8 Ft. fixtures to fit product a
Fixtures mounted 26 1/2" on center. INS2 fixtures mounted 18" on cente .
Pivot mount or stationary mounting brackets allow
aiming of fixtures for optimal performance
NOTE: Not available for INS2 fixtures
P/N 3564 Stationary Mount Kit
4 Ft. and 8 Ft.
Fluorescent Inspection Lighting
10°
INSPECTION CART SWIVEL MOUNT
P/N 4828 Swivel Mount Kit
(For mounting fixtures on a 2” square tube frame. For use on 4 t. fixtures onl .)
15°
Top View
Side View Fixture Front
Front of fixture face
direction of arrow
This SQ. Hole to
back of fixtur
2” SQ. Tube
4 Foot Fixture Rotation
8 Foot Fixture Rotation
P/N 3563 Pivot Hinge Mount Kit 4 Ft. and 8 Ft.
Fluorescent Inspection Lighting
1-800-854-0021
www.ldpi-inc.com
56
INS3 SERIES
DATE:
PROJECT MGR:
JOB:
INSPECTION LIGHTING
APPLICATIONS
PN:
Paint Inspection
Plastic Inspection
Defect Detection
Finesse Decks
Inspection Decks
Polish Decks
LISTINGS:
UL 1598
CSA 22.2 No. 250.0
FEATURES:
20 Ga. steel with powder coated finis
Optional dimming ballast for 4 ft fixture
Type of dimming must be specified
LENS:
Clear tempered glass
Clear tempered glass with stripes
Clear acrylic
Clear acrylic with stripes
Clear polycarbonate
Clear polycarbonate with stripes
ELECTRICAL:
120 - 277V
347V
OPTIONS:
Stationary mount kit (PN: 10315)
Pivot mount kit (PN: 10314)
Flush stationary mount kit (PN: 10387)
6’ cord with blunt end
6’ cord with twist lock plug
(must specify 120, 277 or 347 Volts)
Dimming options available
POWDER COAT HINGE
INSPECTION LIGHTING
SPECIFICATIONS
The INS3 Series is a must have when the finish of any surface counts! This fixture is constructed from 20 gauge cold rolled steel and has a powder
coated finish. This inspection fixture is designed to create a well defined lamp image using light and dark contrasts that cause defects in the paint to
show for ease of defect detection and repair. This fixture is available as a 2’, 4’ or 8’ fixture and is available in a 1, 2, or 3 lamp option. Lamps included.
3/16" CLEAR TEMPERED GLASS
3/16" CLEAR TEMPERED GLASS
POWDER COAT
CLEAR LENS WITH STRIPES TYPE
FRAME ASSEMBLY
POWDER COAT
CLEAR LENS TYPE
FRAME ASSEMBLY
LAMPS INCLUDED
POWDER COAT HINGE
POLISHED SPECULAR OR WHITE
ALUMINUM REFLECTOR
POWDER COAT
20 GA STEEL HOUSING
1/2" CONDUIT HUB
1/4-20 ACCESS FASTENERS
QTY 3
MOUNTING HOLES
Ø 3/8-16 UNC NUT RIVETS
4 PLCS
Lens Assembly Option:
Clear Glass with Stripes
Lens Assembly Option:
Clear Glass
57
1-800-854-0021
www.ldpi-inc.com
INS3 SERIES
www.ldpi-inc.com
INSPECTION LIGHTING
INS3 - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T8:T8
LAMP QTY
1L: 1 Lamp
2L: 2 Lamp
3L: 3 Lamp
LENGTH (Ft.)*
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
DIMMING*
D1: 0-10V
D2: DALI
VOLTAGE
V1: 120-277V
12: 120V
27: 277V
34: 347V
REFLECTOR
SR: Specular
WO: Diffuse White
WR: White
CORD
C6: 6 Ft. Cord no plug
C: 6 Ft. Blunt end cord
CP: 6 Ft. cord
with twist lock plug
(Specify voltage
120, 277 or 347)
Notes:
* 4 Ft. Fixture Only
LAMP**
3: 3500 K
4: 4100 K
5: 5000 K
6: 6500 K***
FINISH
W: White powder coat
B: Black powder coat
S: Special powder coat
color (Specify ”RAL” number
INS special suffix location
LENS
GC: Clear Glass
GS: Clear Glass with stripes
AC: Clear Acrylic
AS: Clear Acrylic with stripes
PC: Clear Polycarbonate
PS: Clear Polycarbonate with stripes
NL: No lens
** Specify three digit code for lamps. Example: For a 3-lamp
fixture with two 5000K lamps in the outside positions and a
3500K lamp in the center position the code would be “535”.
*** 2 Ft. and 4 Ft. Lamps Only
POWDER COAT
HINGE
DIMENSIONS
TYPE
A
B
C
2 Ft. 1 L
26"
9 7/8"
23 3/4"
2 Ft. 2 L
26"
17 7/16"
23 3/4"
2 Ft. 3 L
26"
25"
23 3/4"
4 Ft. 1 L
50"
9 7/8"
47 3/4"
4 Ft. 2 L
50"
17 7/16"
47 3/4"
4 Ft. 3 L
50"
25"
47 3/4"
8 Ft. 1 L
96"
9 7/8"
70"
8 Ft. 2 L
96"
17 7/16"
70"
8 Ft. 3 L
96"
25"
70"
"B"
"A"
3 1/8"
MOUNTING HOLES
Ø 3/8-16 UNC NUT RIVETS
4 PLCS
1-800-854-0021
www.ldpi-inc.com
58
"C"
MOUNTING
5/8"
240 8 Ft. SERIES
DATE:
PROJECT MGR:
JOB:
WET/DAMP LIGHTING
APPLICATIONS
PN:
General Industrial
Tunnels
Water Treatment
Seacoast Areas
Machining Areas
LISTINGS:
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
FEATURES:
Front access fixtur
Hinged front door frame
Hinged ballast tray
Sturdy 18 Ga. steel white powder coated housing
Spring loaded lamp holders - standard
3/16” tempered glass lens
Zinc latches
ELECTRICAL:
Available in: T5 28W, T5HO 54W, T8 32W and 59W, T8HO 44W, and 86W
Voltages of 120, 277, 347 and 480
Through feed wiring
OPTIONS:
Adjustable surface mount brackets
Cable mount
Chain mount kit
8’ wire whip
Specular reflecto
Wire guard
Fusing (not listed for Canada)
Acrylic lens
Polycarbonate lens
EM: UL924 Emergency battery backup ballast
HLO (high light output) ballast for T8 32 watt lamp only
59
1-800-854-0021
www.ldpi-inc.com
WET/DAMP LIGHTING
SPECIFICATIONS
The 240 8 Ft. Series is a very versatile fixture that is ETL listed for ordinary locations. It is an ideal fixture for industrial applications, wet locations and task lighting.
Optional adjustable Mounting brackets allow for precise aiming in multiple angles suitable for most applications. The 240 8 Ft. Series is available in 2, 3, 4, 5, 6, 8,
10 and 12 lamp options, all using a 3/16” tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the 240 8 Ft. Series can
meet most of your wiring needs. Lamps not included.
240 8 Ft. SERIES
www.ldpi-inc.com
WET/DAMP LIGHTING
240 - ___ - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T5: (4’) 28W
T5HO: (4’) 54W
T8: (4’) 32W,
(8’) 59W
T8HO: (4’) 44W,
(8’) 86W
LAMP QTY
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
5L: 5 Lamp
6L: 6 Lamp
8L: 8 Lamp**
10L: 10 Lamp**
12L: 12 Lamp**
LENGTH (Ft.)
8: 8 Ft.
VOLTAGE
347: 347V
UNV1: 120-277V
UNV2: 347-480V***
HUB
TS: Top and
Side Hubs†
Notes:
** 4' lamps only
*** UNV2 T5HO Only
**** Fixture comes equipped with 4 Ft. lamps.
Select 8FTL for optional 8 Ft. Lamps
† 1/2” NPT standard
♦ For horizontal or ceiling mounted fixture onl
OPTIONS
AM: Adjustable Angle Mounting Brackets (PN: 9349)♦
CB: Cable Mount (PN: 6875) Includes 5 ft. cables std.
WH: 8’ Wire Whip
SR: Specular High Bay Reflecto
W: Wire Guard
F: Fuse
A: Acrylic Lens
8HLO: High light output ballast for T8 32W lamp only
8FTL: 8 Ft. Lamp****
1/2 NPT HUBS
1/2 NPT HUBS
INTEGRATED ACCESS DOOR HINGE
"A"
101 3/8”
103”
"A"
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
5 1/8”
HINGED
REFLECTOR
ROTORY DRAW
LATCHES
HINGED
DOOR
FRAME
BRACKETS FOR
OPTIONAL
MOUNTING KITS
1-800-854-0021
www.ldpi-inc.com
60
240 8 Ft. SERIES
www.ldpi-inc.com
WET/DAMP LIGHTING
NOTE: Mounting kits shown on shorter 4 Ft. fixture for clarit
Cable Hang Kit
Part Number: (6875 zinc coated)
and (6875SS stainless steel)
QTY 2 cables with toggle ends
and QTY 2 self locking gripples
Chain Hang Kit
Part Number: (9350)
102” between cables
Pendant Style Mounting
NOTE: Conduit provided by others
Adjustable Surface Mounting Bracket Kit
Part Number: (9349 galvanized)
Bracket attachment point for optional mounting methods
Fixture suspended with 1/2” electrical conduit
using top hubs on fixture at both ends
94 7/8” between conduit
8 Ft. 6 lamp shown with Adjustable Surface Mounting Bracket kit
THERE ARE A NUMBER OF MOUNTING METHODS THAT ARE NOT SHOWN.
61
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
62
376 SERIES
DATE:
PROJECT MGR:
JOB:
WET/DAMP LIGHTING
APPLICATIONS
PN:
Locker Rooms
Kitchens, Showers
Paper Mills
Food Processing
Hospitals and Schools
LISTINGS:
UL 1598A Marine Inside
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
NSF: Splash Zone Non-Food Prep
NEMA 4X
IP65 - 2ft
IP 65 - 4 & 8ft
IP 55 ALL
IP 65 - 2 Ft.
IP 67 - 4 Ft. and 8 Ft.
FEATURES:
Available lengths: 2’, 4’ and 8’
GASKETING:
Poured in place polyurethane gasket and cam latches seal the
enclosure from the most hostile environments.
Provides continuous positive gasket contact.
DIFFUSER:
PR: UV stabilized polycarbonate lens with lineal ribs.
A: UV stabilized impact resistant acrylic lens with lineal ribs.
(Meets UV requirements of UL 756C)
AC: Acrylic optically clear lens (4’ 2 or 3 lamp and 8’ only)
FA: Frosted acrylic lens (4’ 2 or 3 lamp and 8’ only) (Not NSF listed)
FINISH:
Housing: White polished fiberglass. Gear tray: white ename
MOUNTING:
Economical Mounting system can provide dramatic savings on the installation labor.
Durable stainless steel Mounting hardware.
ELECTRICAL:
Available in 14, 17, 24, 28, 32, 54, 59 and 86 watts with T5, T5HO, T8, and T8HO lamps
Voltages of 120, 277 and 347
All electric components are UL and CSA approved.
Full metal gear tray carries all electrical components and provides for a positive ground.
OPTIONS:
HB: 93% reflective specular reflect
EM: Emergency battery backup ballast - not available with 2’ fixtur
SL: Stainless steel latches
WD: Wide distribution enhanced aluminum reflector - (Requires AC or FA lens)
2 lamp fixture with wide distribution (WD) lens
and the acrylic optically clear (AC) lens
NOTE: AC lens is 3.5” deep.
63
1-800-854-0021
www.ldpi-inc.com
WET/DAMP LIGHTING
SPECIFICATIONS
Suitable for interior or exterior applications. A lightweight, vapor tight, nonmetallic fixture ideal for corrosive or wet/damp environments. The 376 fixture
features a fiberglass housing with an acrylic or polycarbonate lens, a continuous gasket design, along with an optional aluminum reflector available
upon request. The 376 is ideal for commercial industrial or institutional applications providing maximum light output where humidity, dust, or fumes
are possible. The 376 is resilient against corrosion and weathering. Lamps not included.
376 SERIES
www.ldpi-inc.com
WET/DAMP LIGHTING
376 - ___ - ___ - ___ - ___ - ___ - ___
CAN SHIP VIA UPS
2 Ft. and 4 Ft. ONLY
LAMP TYPE
T5: 14W, 28W*
T5HO: 24W, 54W
T8: 17W, 32W, 59W*
T8HO: 86W*
(8’ fixture only
LAMP QTY
1L: 1 Lamp (4’ only)
2L: 2 Lamp
3L: 3 Lamp (T5 and T8 only)
4L: 4 Lamp (8’ only)
6L: 6 Lamp (8’ T5 and T8 only)
LENGTH (Ft.)
2: 2 Ft.
4: 4 Ft.
8: 8 Ft.
LENS
PR: Polycarbonate
Ribbed Lens (2’ and 4’ only)
A: Acrylic Ribbed Lens
(4’ 2 or 3 Lamp and 8’ only)
AC: Acrylic Optically Clear Lens
(4’ 2 or 3 lamp and 8’ only)
FA: Frosted Acrylic Lens
(4’ 2 or 3 lamp and 8’ only)
(Not NSF listed)
VOLTAGE
UNV: Universal
120: 120V
277: 277V
347: 347V
Notes:
* IP 65 for MAX (2) 32 W lamps 4 Ft. housing and (4) 32 W lamps 8 Ft. Housing.
IP 55 for all models 2 Ft., 4 Ft., and 8 Ft
IP 67 for all 4 Ft. 2 lamp fixture
LDPI, Inc. stocks multiple configurations. Consult factor .
For chemical resistance information please see website.
OPTIONS
HB: Enhanced Alum. Refl.
0.30” => 93% reflectiv
EM: Emergency Battery
Back up Ballast
WD: Wide distribution enhanced
aluminum reflector
(Used with AC lens ONLY)
(4’ 2 lamp fixture
8’ fixture w/ (2) 8 lamps or
8’ fixture w/ (4) 4 lamps only)
DIMENSIONS (nominal)
Narrow 1 lamp
A
Diffuser/Lens depth: 2.13”
AC and FA lens depth: 3.5”
B
C
D
Standard 2+ lamps
B
C
D
AC and FA acrylic lens
5.75”
PART #
376-__-1L-4-UNV-__
376-__-1L-5-UNV-__
376-__-2L-2-UNV-__
376-__-3L-2-UNV-__
376-__-2L-4-UNV-__
376-__-3L-4-UNV-__
376-__-2L-8-UNV-__
376-__-4L-8-UNV-__
376-__-6L-8-UNV-__
A
B
C
D
51.75”
63.50”
27.25”
27.25”
51.75”
51.75”
100”
100”
100”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
4.25”
4.00”
4.00”
6.75”
6.75”
6.75”
6.75”
6.75”
6.75”
6.75”
4.56”
4.56”
7.33”
7.33”
7.33”
7.33”
7.33”
7.33”
7.33”
“B” measurement: with Poly Molded diffuser. Poly Ribbed diffuser will measure 0.12” shorter.
“B” measurement with Acrylic Optically Clear lens is 5.75”.
376 Shipping Dimensions
Product
Weight
Volume
376-1L-4
376-1L-5
376-2L-2
376-2L-4
376-2L-8
376-3L-2
376-3L-4
376-4L-8
376-6L-8
8#
10#
6#
12#
20#
6#
12#
21#
23#
1.09 Cu.. Ft.
1.29 Cu.. Ft.
.66 Cu.. Ft.
1.09 Cu.. Ft.
2.47 Cu.. Ft.
.66 Cu.. Ft.
1.09 Cu.. Ft.
2.47 Cu.. Ft.
2.47 Cu.. Ft.
LWH
59” L 8” W
70” L 8” W
36” L 8” W
59” L 8” W
107” L 8” W
36” L 8” W
59” L 8” W
107” L 8” W
107” L 8” W
4” H
4” H
4” H
4” H
5” H
4” H
4” H
5” H
5” H
Mounting
•
•
•
•
•
Mounting brackets provide impressive benefits
P/N 6685: 1 lamp housing
P/N 6686: 2 or 3 lamp housing
Two brackets per kit. 1 kit needed per fixture
Mounting bracket for narrow and
standard lamp housing.
1-800-854-0021
www.ldpi-inc.com
OPTIONAL Mounting
45° Mounting bracket kit (8' fixture requires 2 kits
P/N 5151: 1 lamp housing
Kit includes:
(2) 45° brackets and
(2) 5080 brackets
P/N 5102: 2 or 3 lamp housing
Kit includes:
(2) 45° brackets
(2) 5081 brackets
Chain hung Mounting bracket bail kit (8' fixture requires 2 kit )
P/N 5192: Narrow housing
P/N 5193: Standard housing
Kit includes:
(2) S-hooks
(2) 2’ lengths of chain
(2) 5150 chain hang looms
(2) 5080 brackets (narrow housing only)
(2) 5081 brackets (standard housing only)
64
3 9/32”
45°
Chain hung Mounting option
379i SERIES
DATE:
PROJECT MGR:
JOB:
WET/DAMP LIGHTING
APPLICATIONS
PN:
Frosted Lens
Warehouses, Paper Mills
Locker Rooms
Kitchens, Showers
Food Processing
Hospitals and Schools
LISTINGS:
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
NSF: Splash zone non-food prep
NEMA 4X
IP67 (enclosure only)
High pressure tested 1500psi
IP67
FEATURES:
5VA flammability ratin
Suitable for outdoor and Indoor use
Closed cell polyurethane gasket with no seams
Standard plastic (acetal copolymer) latches
LENS:
Impact resistant acrylic (91.5% transmission)
Optional UV stabilized polycarbonate (87% transmission)
Optically clear or frosted lens
ELECTRICAL:
Available in 28, 32, 44, and 54 watts in T5, T8, T8HO, T5HO lamps.
Voltages of 120, 277, 347 and 480.
OPTIONS:
Enhanced aluminum reflecto
Emergency backup ballast
Flexible ceiling mount kit
Tamper resistant latches
Custom performance reflector (special request
Stainless steel Mounting straps (same as standard except stainless steel)
Rigid ceiling mount for surface Mounting or dual pendant (supplied by others)
6 3/16"
8"
42"
36"
12"
52"
65
1-800-854-0021
www.ldpi-inc.com
14 9/16"
WET/DAMP LIGHTING
SPECIFICATIONS
The 379i Series is a perfect fixture for industrial applications desiring a wet/damp fixture or an enclosed high bay fixture. The 379i is a glass fiber reinforced product with injection
molded lens options for precise detail and strength. The lenses also have frosted ends, lineal prism sides with frosted or optically clear face. All hardware is stainless steel with tamper
resistant latches. The gear tray hinges at both sides with tool-less latches for ease of accessibility and maintenance. The 379i series comes standard with the V-hook Mounting system
with zinc plated Mounting straps. Ask us about our customized performance reflector option. Lamps not included.
379i SERIES
www.ldpi-inc.com
WET/DAMP LIGHTING
379i - ___ - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T5: 28W
T8: 32W*
T8HO: 44W
T5HO: 54W*
LAMP QTY
3L: 3 Lamp
4L: 4 Lamp*
5L: 5 Lamp
6L: 6 Lamp*
LENGTH (Ft.)
4: 4 Ft.
VOLTAGE
UNV1: 120-277V 50/60Hz*
120: 120V 60Hz
277: 277V 60Hz
UNV2: 347/480V
50/60 Hz - T5HO ONLY
LENS
Diffuser Type:
A: Acrylic*
P: Polycarbonate
FA: Frosted Acrylic
OPTIONS
HB: Enhanced Aluminum Reflector
EM: Emergency Backup Ballast
CM: Cable Mount (Cable not included)
TR: Tamper Resistant Latches
CR: Custom Performance Reflector Syste
RZ: Rigid Ceiling Mount (zinc plated)
RS: Rigid Ceiling Mount (stainless steel)
MS: Mounting Strap (stainless steel)
For use with cable or chain (not included)
Notes:
* Standard fixture configuratio
For chemical resistance information please see website
MOUNTING
Standard V-hook mounting with zinc plated mounting straps
Flexible stainless steel ceiling mount system
1 1/4” between ceiling and housing for heat dissipation
Attaches directly to the ceiling!
Mounting holes on the 6986 ceiling mount kit are 1/4”
X 1/2” oval with a measurement of 4” on center. Ceiling
mount kit: 6986. Kit consists of (2) 6985 brackets.
316 Stainless Steel V-hook.
UL rated for 4X fixture weight
Maximum fixture weight of 23lbs
Rigid Ceiling Mount
RZ: Zinc plated
RS: Stainless steel
RZ or RS also used for:
Dual Pendant Mounting
(Pendants supplied by others)
ADDITIONAL CEILING MOUNTS
Ceiling mount system kit: 8366:
Stainless steel ceiling Mounting brackets, sealing washer, 1/2” conduit hub, 1/2” conduit hub plug and stainless steel support plate. (Assembly required)
Ceiling mount system kit 8367 - Square bend U bolt
Ceiling mount system kit 8368 - U bolt
Ceiling mount system kit 8369 - 3 Ft. rod
1 1/4"*
Ø 25/64"
7 5/16"
2 3/8"
Ø
25/64" X 1/2"
SLOTS
*BETWEEN CEILING AND HOUSING FOR HEAT DISSIPATION
STAINLESS STEEL SQUARE BEND U-BOLT
2" SQUARE OD TUBING (BOTH ENDS)
STAINLESS STEEL CEILING
MOUNTING BRACKET (BOTH ENDS)
1-800-854-0021
www.ldpi-inc.com
STAINLESS STEEL U-BOLT
FOR PIPE SIZE 1 1/2" (2" OD PIPE) (BOTH ENDS)
STAINLESS STEEL 3/8” ROD
(BOTH ENDS)
66
240 SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Chemical Plants
Paper Mills
Tunnels
Water Treatment
Seacoast Areas
Machining Areas
Coal and Dust Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
T rating see chart
T4A 120°C
Class III
T4A 120°C
IP 65
55°C ambient rating (T8-32 watt)
EM optioned fixtur
FEATURES:
Front access fixture for hazardous location
Hinged front door frame
Hinged ballast tray
Sturdy 18 Ga. steel white powder coated housing
Spring loaded lamp holders - standard
3/16” tempered glass lens
Zinc latches
ELECTRICAL:
Available in 28, 32, 44 and 54 watts with T5, T5HO, T8, and T8HO lamps.
Voltages of 120, 277, 347 and 480
Through feed wiring
OPTIONS:
Adjustable surface mount brackets
Cable mount
Chain mount kit
8’ wire whip
Specular reflecto
Wire guard
Fusing (not listed for Canada)
Acrylic lens
Polycarbonate lens
EM: Emergency battery backup ballast (UL US only)
HLO (high light output) ballast for T8 32 watt lamp only
Stainless steel housing - consult factory
67
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
The 240 Series is a very versatile fixture that is UL listed for hazardous environments (Class I Division 2 Groups A, B, C and D, Class II Division 2 Groups F and G, and Class III). It is
an ideal fixture for industrial applications, wet locations and task lighting. Optional adjustable Mounting brackets allow for precise aiming in multiple angles suitable for most applications.
The 240 Series is available in 2, 3, 4, 5 and 6 lamp options, all using a 3/16” tempered glass lens with acrylic and polycarbonate optional lenses. With multiple hub locations, the 240
Series can meet most of your wiring needs. Lamps not included.
240 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
240 - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T5: 28W
T5HO: 54W
T8: 32W
T8HO: 44W
LAMP QTY
2L: 2 Lamp
3L: 3 Lamp
4L: 4 Lamp
5L: 5 Lamp
6L: 6 Lamp
VOLTAGE
347: 347V
UNV1: 120-277V††
UNV2: 347-480V***
HUB
TS: Top and Side Hubs**
** 1/2” NPT standard
*** UNV2 T5HO Only
†
For horizontal or ceiling mounted fixture onl
††
EM available as UNV1 (120-277) only
OPTIONS
AM: Adjustable Angle Mounting Brackets (PN: 6856)†
6856SS: AM Stainless Steel†
CB: Cable Mount (PN: 6875) Includes 5 ft. cables std.
6875SS: CB Stainless Steel. Includes 5 ft. cables std.
(Consult Factory for availability)
WH: 8’ 3-Wire Whip
SR: Specular High Bay Reflecto
W: Wire Guard
F: Fuse
A: Acrylic Lens
7979: Chain mount kit
EM: Emergency battery backup ballast††
(Ambient reduced to 40°C)
8HLO: High light output ballast for T8 32W lamp only
10357: Vertical Mounting Bracket
T-Ratings
Model
Rated
Ambient
Deg. C
Supply
Wiring
Temp
Class I, Div. 2
Operating
Temperature Code
Class II, Div. 2
Operating
Temperature Code
Class III
Operating
Temperature Code
240-T5
40
75
T3C (160°C)
T4A (120°C)
T4A (120°C)
240-T5HO
40
75
T3C (160°C)
T4A (120°C)
T4A (120°C)
240-T8HO
40
75
T4A (120°C)
T4A (120°C)
T4A (120°C)
240-T8*
55
75
T5 (100°C)
T4A (120°C)
T4A (120°C)
* 240 with EM option ambient is reduced to 40°C
1/2 NPT HUBS
1/2 NPT BOTH ENDS
HINGED REFLECTOR
BRACKETS FOR
OPTIONAL
MOUNTING KITS
INTEGRATED ACCESS
DOOR HINGE
"A"
ROTARY
DRAW
LATCHES
HINGED
DOOR
FRAME
51 1/2"
53 1/8"
5 5/16”
1-800-854-0021
www.ldpi-inc.com
"A":
2 LAMP: 12 3/16"
3 & 4 LAMP: 16 3/16"
5 & 6 LAMP: 20 11/16"
68
240 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
Cable Hang Kit
Part Number: (6875 zinc coated)
QTY 2 cables with toggle ends
and QTY 2 self locking gripples
Chain Hang Kit
Part Number: (7979)
52 1/4” between chains
Pendant Style Mounting
NOTE: Conduit provided by others
Adjustable Surface Mounting Bracket Kit
Part Number: (6856 galvanized)
Bracket attachment point for optional mounting methods
Fixture suspended with 1/2” electrical conduit
using top hubs on fixture at both ends
45” between conduit
THERE ARE A NUMBER OF MOUNTING METHODS THAT ARE NOT SHOWN.
69
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
70
241 SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS BOOTH LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Prep Areas
Inspection Areas
Sanding Areas
Laboratories
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
FEATURES:
Piano hinged rear access fixture
20 gauge steel white powder coat housing
Spring loaded lamp holders - Except T5HO
ELECTRICAL:
Available in 32, 44, and 54 watts in
T5HO, T8, and T8HO lamps.
Voltages of 120, 277, and 347 Volts.
OPTIONS:
EM: Emergency battery backup ballast (ETL US only)
120 or 277V MUST SPECIFY
5901: 8 Ft. 3-wire whip
4692: Installation kit
SPECIFICATIONS
The 241 Series is an ideal product for a multitude of areas including Paint Spray Booths, Prep Areas, Inspection Areas, Sanding or Machining Areas, even where Grain or Coal
Dust may be a concern. This 4 lamp 4’ fixture is available in wattages including 32, 44, and 54 watts with a rear access piano hinged door for easy access to lamps and ballast.
The 241 Series carries multiple listings from UL and ETL for Class I Div. 2 and Class II Div. 2 applications. Must be mounted hinge side up. Lamps not included.
Piano hinged
rear access
71
1-800-854-0021
www.ldpi-inc.com
241 SERIES
www.ldpi-inc.com
Series
390241 Rear Access Only
Watts
Lamp Qty
Hub
Order #
Voltage
32W T8
4
1/2” NPT
1/2” NPT
390241
3546
390241347 3125
120-277 Volts 50/60Hz
347 Volts 60Hz
32W T8HLO
4
1/2” NPT
390241
6974
120-277 Volts 60Hz
44W T8HO
4
1/2” NPT
390241
7758
120-277 Volts 60Hz
54W T5HO
4
1/2” NPT
390241
4843
120-277 Volts 50/60Hz
/8”
5-1
52 1/2”
1/8
”
15 1/8”
14 1/2”
53
1-800-854-0021
www.ldpi-inc.com
72
241 SERIES
www.ldpi-inc.com
Part Number: 4692 Installation Kit
Item
1.
2.
3.
4.
5.
6.
7.
8.
9.
Description
1/2” x 3/4” Gasket
Light Clip
Glass Clip
Clear Tempered Glass
3/16” x 15” x 53”
*Not included in kit.
Ordered separately as P/N 1706
1 1/2” x 1 1/2” Corner Bracket
Frame (15 3/4” Long)
Frame (53 1/2” Long)
1/8” Pop Rivet
Nut Hex 1/4 - 20 Zinc Coated
HHCS 1/4 - 20 Zinc Coated
Installation Sketch
Qty.
12’
4
2
1
Installation Detail
4
Panel
Frame
4
2
2
8
3
1
Detail A-1
10
1
2
3
*Not
4 Included
in Kit
9
8
5
7
6
Not Included
in Kit
1
12
”
1/2
0
x5
See Detail
A-1
ole
”H
1/4
Not Included in Kit
Inner Surface of Panel
73
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
74
260/261 SERIES
DATE:
JOB:
PN:
APPLICATIONS
PROJECT MGR:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
FEATURES:
20 gauge steel construction with white powder coat housing
which creates a durable, highly reflective finis
Series 260, or rear access only in the Series 261.
LENS:
3/16” clear tempered glass.
ELECTRICAL:
Paint spray cutoff switch for the front door frame access of the 260 Series
Available in 32 watts withT8 lamps
Voltages of 120, 277 and 347 Volts
OPTIONS:
Wire whip 8 Ft. - 5901: 3-wire (261) or 5902: 5-wire (260)
Panel stiffener kit #1704 (fits 18 gauge panels only
NOTE:
capacity of the switch, a solid state relay is recommended. It may be desired
CAUTION:
Interlock Microswitch
Model 260
75
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 260/261 Series is a product designed specifically for Paint Spray Booths. These 4 lamp 4’ fixtures are available in 32 Watts.
The 260 Series allows for both front and rear access using a paint spray cutoff switch when the front door frame is opened.
The 261 Series is a rear access only fixture and does not require paint spray cutoff. Both units carry multiple listings from ETL for Class
I Div. 2 and Class II Div. 2 applications. Must be mounted hinge side up. Lamps not included.
260/261 SERIES
www.ldpi-inc.com
Series
Watts
Lamp Qty
Hub
390260
Front and Rear Access
32W T8
4
4
4
32W T8
32W T8HLO
32W T8HLO
390261
Rear Access Only
Order #
Voltage
1/2” NPT
1/2” NPT
1/2” NPT
390260
3546
390260347 3125
390260
6747
120-277 Volts 50/60Hz
347 Volts 60Hz
120-277 Volts 60Hz
4
4
1/2” NPT
1/2” NPT
390261
3546
390261347 3125
120-277 Volts 50/60Hz
347 Volts 60Hz
4
1/2” NPT
390261
120-277 Volts 60Hz
6747
(All Options Ordered Separately)
53
/4”
49
16”
13/
53
”
1/4
Rear Access Panel
Models 260 and 261
18 3/8”
21 3/4”
7 5/8”
51 1/4”
12”
12”
12”
7 5/8”
3 13/16”
HOLE DETAIL
CUT LIGHT HOLE
19 5/8” X 51 1/4”
3/8” TYP.
19 5/8”
12”
3 13/16”
5/16” Dia.
12 Holes
1-800-854-0021
www.ldpi-inc.com
76
260/261 SERIES
www.ldpi-inc.com
Part Number: 1704 Panel Stiffener and Interlock Switch
OPTIONAL:
PANEL STIFFENER
KIT # 1704
(FITS 18 GA. PANELS ONLY)
/4”
11
X5
/8” SIZE
5
19 OLE
H
PAINT SPRAY
BOOTH PANEL
390260
FIXTURE
PANEL STIFFENER
BOOTH INTERIOR
FOAM GASKETING
TO BE WIRED IN SUCH A WAY THAT IT
DISABLES PAINT SPRAY EQUIPMENT
WHEN LIGHT IS ACCESSED FROM INSIDE
OF THE PAINT SPRAY BOOTH.
1/4 - 20 UNC U-NUT
INSTALLATION FASTENER
1/4 - 20 UNC X 3/4”
NEMA 1
SWITCH
INTERLOCK SWITCH
HUB
FRAME FASTENER
A
B
YELLOW
YELLOW
GLASS
INTERLOCK
SWITCH
NOTE: DUAL ACCESS
MODEL # 390260 SHOWN.
MODEL 390261 IS A REAR-ACCESS ONLY.
(DIMENSIONS ARE THE SAME.)
IMPORTANT:
Normally open magnetic switches are intended to be used to trigger a relay (furnished
by others) which disables the paint system. Because of the small capacity of the switch,
a solid state relay is recommended. It may be desired by others to utilize a separate
power supply to segregate the relay (furnished by others) from lighting power supply.
The magnetic switch is rated for 10 watts (resistive) at a maximum of 300 VAC.
The magnetic switch is NOT designed to directly control light operation.
7 5/8”
51 1/4”
12”
12”
12”
CAUTION: Overloading the switch circuits will cause failure.
LDPI® recommends having a certified electrician/engineer revie
circuit loads to insure that overloading of switch does not occur.
7 5/8”
3 13/16”
CUT LIGHT HOLE
19 5/8” X 51 1/4”
3/8” TYP.
19 5/8”
12”
3 13/16”
5/16” Dia.
12 Holes
77
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
78
280/281 SERIES
DATE:
JOB:
PN:
APPLICATIONS
PROJECT MGR:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
FEATURES:
Series 280, or rear access only in the Series 281.
LENS:
ELECTRICAL:
Paint spray cutoff switch for each front door frame access of the Series 280.
Available in 59 or 86 watts in T8 or T8HO lamps.
Voltages of 120, and 277 Volts.
OPTIONS:
Wire whip 8 Ft. - 5901: 3-wire (281) or 5902: 5-wire (280)
Panel stiffener kit #1728 (fits 18 gauge panels
NOTE:
capacity of the switch, a solid state relay is recommended. It may be desired
CAUTION:
79
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 280/281 Series is a product designed specifically for Paint Spray Booths. With a wider fixture design these products will provide increased photometric output and
efficiencies. These 4 lamp 8’ fixtures are available in wattages including 59 and 86 watts. The 280 Series allows for both Front and Rear access using a paint spray
cutoff switch when either front door frame is opened. The 281 Series is a rear access only fixture and does not require paint spray cutoff. Both units carry multiple
listings from ETL for Class I Div. 2 and Class II Div. 2 applications. Must be mounted hinge side up. Lamps not included.
280/281 SERIES
www.ldpi-inc.com
Series
Watts
Lamp Qty
Hub
Order #
Voltage
390280
Front and Rear Access
59W T8
4
1/2” NPT
390280
3281
120-277 Volts 60Hz
86W T8HO
4
1/2” NPT
390280
4854
120-277 Volts 50/60Hz
390281
Rear Access
59W T8
4
1/2” NPT
390281
3281
120-277 Volts 60Hz
86W T8HO
4
1/2” NPT
390281
4854
120-277 Volts 50/60Hz
(All Options Ordered Separately)
21 5/8”
99
18 3/8"
6"
5/1
102
6"
11/1
5 3/4"
1-800-854-0021
www.ldpi-inc.com
80
5 1/4"
280/281 SERIES
www.ldpi-inc.com
Part Number: 1728 Panel Stiffener
and Interlock Switch
OPTIONAL:
Panel Stiffener Kit # 1728
Fits 18 Ga. Panels ONLY
”
5/8
100
” X SIZE
8
/
5
19 HOLE
Paint Spray
Booth Panel
390280
Fixture
NEMA 1
SWITCH
INTERLOCK SWITCH
TO BE WIRED IN SUCH A WAY THAT IT
DISABLES PAINT SPRAY EQUIPMENT
WHEN LIGHT IS ACCESSED FROM INSIDE
OF THE PAINT SPRAY BOOTH.
PANEL STIFFENER
1/4 - 20
UNC U-NUT
BOOTH INTERIOR
FOAM GASKETING
INSTALLATION FASTENER
1/4 - 20 UNC X 3/4”
B
YELLOW
HUB
YELLOW
FRAME FASTENER
GLASS
MAGNET
INTERLOCK SWITCH
A
MOUNTING DETAIL SHOWING
FIXTURE IN PANEL.
IMPORTANT:
Normally open magnetic switches are intended to be used to trigger a relay (furnished
by others) which disables the paint system. Because of the small capacity of the switch,
a solid state relay is recommended. It may be desired by others to utilize a separate
power supply to segregate the relay (furnished by others) from lighting power supply.
The magnetic switch is rated for 10 watts (resistive) at a maximum of 300 VAC.
The magnetic switch is NOT designed to directly control light operation.
CAUTION: Overloading the switch circuits will cause failure.
LDPI® recommends having a certified electrician/engineer review
circuit loads to insure that overloading of switch does not occur.
7 5/8”
12”
12”
12”
100 5/8”
13 3/8”
12”
12”
12”
7 5/8”
280/281 FIXTURE HOLE DETAIL
3/8” TYP.
12”
19 5/8”
3 13/16”
3 13/16”
5/16” Dia. 12 Holes
81
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
82
384 SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Pit Lighting
Laboratory Applications
Washdown Areas
Petrochemical Plants
Chemical Plants
Maintenance Pits
Oil Drilling Rigs
Machining/Fabricating
Waste Water Treatment Areas
LISTINGS:
UL 844
CSA 22.2 No. 137.0
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
T4 135°C
FEATURES:
Corrosion resistant, low copper content aluminum
Zinc plated latches are standard
3/4” hubs
Neoprene gasket
Easy access to fluorescent ballast and internal wirin
LENS:
1/8” Clear acrylic lens is heat and shatter resistant.
MOUNTING:
Versatile Mounting arrangements.
Brackets come standard
ELECTRICAL:
Available in AC
Available in 17, 24, 32 and 54 watts
T5HO and T8
Voltages: 120, 220 and 120-277
OPTIONS:
EM: Emergency battery backup ballast (4’ fixture only
83
HAZARDOUS LIGHTING
SPECIFICATIONS
Meets all Coast Guard specifications. Streamlined design provides eye appeal and ruggedness.
Designed to withstand strong vibration. Adjustable Mounting brackets and lamps included.
Straight in lamp holders.
1-800-854-0021
www.ldpi-inc.com
384 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
384 - ___ - ___ - ___ - ___ - ___
CAN SHIP VIA UPS
LAMP TYPE
T5HO: 54W or 24W
T8: 17W or 32W
PL40: PL-L 40W CFL
LAMP QTY
2L: 2 lamps
LENGTH (Ft.)
2: 2 Ft.
4: 4 Ft.
VOLTAGE
UNV1: Universal 120-277V
120: 120V
277: 277V
OPTIONS
EM: Emergency Battery Backup
(4’ fixture only
Adjustable Mounting brackets and lamps included.
A
C
D
B
384 SERIES DIMENSIONS (INCHES)
A
B
C
D
4 Ft.
51.6
50.0
6.3
6.5
2 Ft.
26.0
26.0
6.3
6.5
WEIGHT
32#
23#
VOLUME
1.55 Cu. Ft.
.78 Cu. Ft.
Mounting (standard)
Versatile Mounting arrangements, (360°).
Brackets come standard
1 3/4”
3/8”
2”
4 5/8”
6”
Adjustable Mount Bracket Detail
1-800-854-0021
www.ldpi-inc.com
84
400 SERIES
DATE:
PROJECT MGR:
JOB:
PN:
APPLICATIONS
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
NFPA 33
FEATURES:
Piano hinged rear access fixture - easy relampin
Telescopic/spring loaded lamp holders
20 gauge (enclosed and gasketed) steel construction
with white powder coat housing which creates a
durable, highly reflective finis
LENS:
ELECTRICAL:
Available in 2 Ft. 17 watt T8 lamps and
4 Ft. 32, 44 and 54 watts, T8, T8HO and T5HO lamps.
Voltages of 120, 277, 347 and 480
OPTIONS:
85
SPECIFICATIONS
The 400 Series Rear Access product is an ideal paint spray booth product when a rear access fixture is desired. The 400 Series is also a vapor proof
product with an ETL listing of Class I Division 2 rating. This series now has a 2’ fixture as well as the 4’ fixture cataloged. The 4’ fixture comes in 2, 4 and
6 lamp with the following lamp options: T8 32W, T8HO 44W, and T5HO 54W lamps. The 2’ - 3 lamp fixture uses (3) T8 17W lamps. Lamps not included.
1-800-854-0021
www.ldpi-inc.com
400 SERIES
www.ldpi-inc.com
Series
Watts
Lamp Qty
Hub
390231 (2 ft. 3 lamp)
17W T8
3
1/2” NPT
390231
3546
120-277 Volts 50/60 Hz
390421 (4 ft. 2 lamp)
32W T8
2
2
1/2” NPT
1/2” NPT
390421
390421347
3613
3276
120-277 Volts 50/60 Hz
347 Volts 60 Hz
32W T8HLO
2
1/2” NPT
390421
6975
120-277 Volts 50/60 Hz
44W T8HO
2
1/2” NPT
390421
7758
120-277 Volts 50/60 Hz
54W T5HO
2
2
1/2” NPT
1/2” NPT
390421
390421
3265
5420
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
32W T8
32W T8HLO
4
4
4
1/2” NPT
1/2” NPT
1/2” NPT
390441
390441347
390441
3546
3125
6974
120-277 Volts 50/60 Hz
347 Volts 60 Hz
120-277 Volts 50/60 Hz
44W T8HO
4
1/2” NPT
390441
7758
120-277 Volts 50/60 Hz
54W T5HO
4
4
1/2” NPT
1/2” NPT
390441
390441
4843
5421
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
32W T8
6
6
1/2” NPT
1/2” NPT
390461
390461347
3546
3125
120-277 Volts 50/60 Hz
347 Volts 60 Hz
32W T8HLO
6
1/2” NPT
390461
7059
120-277 Volts 50/60 Hz
44W T8HO
6
1/2” NPT
390461*
7758
120-277 Volts 50/60 Hz
54W T5HO
6
6
1/2” NPT
1/2” NPT
390461
390461
3265
5420
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
390441 (4 ft. 4 lamp)
390461 (4 ft. 6 lamp)
Order #
Voltage
Multiple voltages available, consult factory)
* Hub location different from standard
MODEL
390231
390421
390441
390461
A
10 1/2”
10 1/2”
15 1/2”
20 1/2”
B
12 1/2”
12 1/2”
17 1/2”
22 1/2”
C
26”
50 1/4”
50 1/4”
50 1/4”
D
28 3/8”
52 3/8”
52 3/8”
52 3/8”
E
11 3/4”
10 3/4”
15 3/4”
20 3/4”
12”
1 7/16”
5/16”
TYP
MOUNTING
DIMENSIONS
FIXTURE
DIMENSIONS
F
8”
7”
12”
17”
26 7/8”
12”
1/2” TYP
1 7/8”
Ø 5/16” DIA.
10 Holes
E
10 3/4”
HOLE DETAIL (2 FT. 390231)
F
26 1/4”
3 1/2”
C
50 1/4”
D
16”
1 1/8”
E
A
16”
5/16” TYP
1/2” TYP
B
50 7/8”
1-800-854-0021
www.ldpi-inc.com
16”
86
1 7/8”
Ø 5/16” DIA.
12 Holes
F
1 7/8”
400 SERIES
www.ldpi-inc.com
MOUNTING
CUT-OUT
3 1/2"
"C"
"B"
1/4-20 UNC X 1"
FASTENERS
P/N 1705
"D"
"A"
1/2 NPT CONDUIT HUB
ON BOTTOM
(NOT SHOWN)
NOTE: LIGHT FIXTURE'S GLASS
FRAME EXTENDS 3/8" INTO
BOOTH WHEN MOUNTED IN
BOOTH PANEL.
PAINT SPRAY
BOOTH PANEL
FEATURES REAR ACCESS HOUSING.
BOOTH PANEL
3 1/2 ± 1/16”
(INSTALLED)
CAULK CONSISTENTLY IN THIS
AREA AROUND THE ENTIRE
FIXTURE PRIOR TO MOUNTING
AND THEN AROUND THE ENTIRE
PERIMETER AFTER MOUNTING.
BOOTH
EXTERIOR
INSTALLATION
FASTENER
1/4 - 20 UNC x 1”
FRONT OF FIXTURE
MOUNTING DETAIL
87
1-800-854-0021
www.ldpi-inc.com
www.ldpi-inc.com
1-800-854-0021
www.ldpi-inc.com
88
400SLB SERIES
DATE:
PROJECT MGR:
JOB:
PN:
APPLICATIONS
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
Drill Rig Control Rooms
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
Class I D2 Groups A,B,C,D T4 135°C
T4 135°C
FEATURES:
20 gauge steel construction with a powder coat finis
Front access housing for convenient relamping and servicing
LENS:
ELECTRICAL:
Voltages of 120-277, 347-480 (T5HO only)
OPTIONS:
3 Ft. 5-wire whip
Stainless steel powder coated white housing
Aluminized steel housing
High brightness reflecto
NOTE:
CAUTION:
89
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 400SLB Series Inside Access fixture features a 20 gauge powder coated, shallow steel housing that is 2" deep. This 4 Ft. fixture is available as
a 4 or 6 lamp fixture with T8 and T5HO lamping options. This series provides front door fixture access with a completely removable lens assembly
and comes with a paint spray cutoff switch. Lamps not included.
400SLB SERIES
www.ldpi-inc.com
400SLB - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T5HO: (54W)
T8: (32W)
LAMP QTY
4L: 4 Lamps
6L: 6 Lamps
VOLTAGE
UNV1: 120-277V
UNV2: 347-480V
(T5HO only)
FINISH
PC: Powder Coated Steel
SS: Stainless Steel
Powder Coated White
AS: Aluminized Steel
REFLECTOR
PR: White Powder Coat
HB: High Brightness Reflecto
7/8 TYP
13 3/4
(4 LAMP)
17 3/4
(4 LAMP)
18 3/4"
(6 LAMP)
22 3/4"
(6 LAMP)
1/2" CONDUIT HUB
54
5/8 1/2 2
7/8 TYP
50
2"
52"
16"
16"
16"
2"
2 7/16"
15 3/4"
(4 LAMP)
HOLE DETAIL
(4 LAMP AND 6 LAMP FIXTURES)
20 3/4"
(6 LAMP)
Ø 5/16"
12 PLCS
9/16" TYP
9/16" TYP
1-800-854-0021
www.ldpi-inc.com
12"
(4 LAMP)
17"
(6 LAMP)
2 7/16"
53 1/8"
90
440 2x4 SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
LISTINGS:
UL 844
CSA 22.2 No. 137.0
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
T3C 160°C
T3C 160°C
FEATURES:
20 gauge enclosed, sealed and gasketed steel
construction with post painted white powder coat finish
Front access troffer style:
Lay-in fixture fits 2x grids with up to a 2” industrial “T-grid” suspension system.
Standard lay-in Mounting
LENS:
3/16” prismatic tempered glass lens.
ELECTRICAL:
Available in 32 watts with T8 lamps
120-277 Volts universal ballast
OPTIONS:
91
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
The 440 2x4 Series is a slim 4 1/4” product that is suited for use in clean room applications where a lay-in, recessed or surface mount troffer application is desired.
The 440 2x4 Series is a Vapor and Dust proof product with ETL listings of Class I Division 2 and Class II Division 2. This series comes in a 4 lamp configuration
of T8 32W lamps, and utilizes a specular polished reflector system for increased light output. Lamps not included.
440 2x4 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
3904402X4 - ___ - ___ - ___ - ___ - ___
HUB LOCATIONS
A, B, C, and D
will clear for Lay-in Mount
LAMP TYPE
T: T8 32W
MOUNT
L: Lay-in*
R: Recessed flange/box pane
(for use with kits 8363 and 3332)
S: Surface mount
(for use with kit 8362)
HOUSING
PP: PrePaint
PC: Powder Coat
(Standard)
GS: Galvanized Steel
HUB
A, B, C or D
See Hub Locations
BALLAST
3546: T8
120-277 Volts 50/60 Hz
D
* Lay-in Mount is standard, Other
Mounting options ordered
separately
B
C
(Back of Fixture)
A
DIMENSIONS (Nominal) and MOUNTING (Ordered Separately)
Mounting Methods
Ceiling Lay-In for 2’ X 4’ Grid (standard)
Surface Mount: Kit P/N 8362
Recessed Flange Mount: Kit P/N 8363
Box Panel Mount: Kit P/N 3332
LAY-IN MOUNT
SURFACE MOUNT
STANDARD
KIT P/N 8362
Independent support bracket shown.
Lay-in mount option only.
3 15/16"
3 15/16"
47
4 1/4"
47 3/4"
"
3/4
51
49
/2"
"
1/2
1
15"
23 1/2"
4 1/4"
23 1/2"
RECESSED FLANGE
MOUNT: P/N 8363
P/N 3332
2 1/4"
3 1/4"
23
15"
1/2
"
3 15/16"
/2"
11
5
BOX PANEL MOUNT
15"
1 3/8"
3 15/16"
1 1/8" TYP
15"
15"
3 1/4"
2 1/4"
4 1/4"
5 1/4"
25
"
/4
73
"
1/2
15"
23 1/2"
"
23 1/2"
15"
4 1/4"
47 3/4"
4
15"
1/2
49
4 1/4"
5 1/4"
1-800-854-0021
www.ldpi-inc.com
15"
4 1/4"
92
1 3/8"
440T/THO SERIES
PROJECT MGR:
JOB:
PN:
APPLICATIONS
DATE:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
Limited plenum areas
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
FEATURES:
20 gauge enclosed, sealed and gasketed, white powder coated fin sh.
Front access troffer style:
Lay-in fixture fits 2x grids with up to a 2” industrial “T-grid” suspension system.
Highly reflective white finish with a specular insert for incre ed light output.
90° self-contained hinge system (reduces overspray and dust)
LENS:
3/16” prismatic tempered glass lens.
ELECTRICAL:
Available in 28 and 54 watts with T5 and T5HO lamps
120-277 and 347-480 Volts universal ballast. Hub location varies,
dependent on Mounting style and customer preference.
Paint spray cutoff switch for front door frame access.
OPTIONS:
2 and 3 lamp configuration
3330: surface mount, 3331: recessed flange mount or 3332: box p nel mount
NOTE:
capacity of the switch a solid state relay is recommended. It may be desired by
others to utilize a separate power supply to segregate the relay
CAUTION:
93
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The Series 440T / 440THO is a slim 2 1/4” product that is suited to being used in paint spray booths (with recessed flange mount option) and clean room applications
where a lay-in troffer application is desired. The Series 440T / 440THO is a vapor and dust proof product with ETL listings of Class I Division 2 and Class II Division 2.
This series comes in 4 lamp configurations of either T5 28W or T5HO 54W lamp options. Both utilize a specular insert for increased light output. Lamps not included.
440T/THO SERIES
www.ldpi-inc.com
390440 - ___ - ___ - ___ - ___ - ___
HUB LOCATIONS A, B, and D NOT
recommended for Lay-in Mount
C: not for use with surface mount.
LAMP TYPE
T: T5 28W
THO: T5HO 54W
MOUNT
L: Lay-in*
R: Recessed flange/box pane
(for use with kits 3331 and 3332)
S: Surface mount
(for use with kit 3330)
HOUSING
PP: PrePaint
PC: Powder Coat (Std)
GS: Galvanized Steel
HUB
Hub location
A, B, C or D
See Hub Locations
BALLAST
4425: T5 120-277 Volts
3265: T5HO 120-277 Volts
5420: T5HO 347-480 Volts
D
* Lay-in Mount is standard.
Other Mounting options
ordered separately
B
C
(Back of
Fixture)
A
DIMENSIONS (Nominal) and MOUNTING (ordered separately)
Mounting Methods
Ceiling Lay-In for 2x4’ Grid (standard)
Surface Mount: Kit P/N 3330
Recessed Flange Mount: Kit P/N 3331
Box Panel Mount: Kit P/N 3332
SURFACE MOUNT
LAY-IN MOUNT
KIT P/N 3330
STANDARD
Independent support bracket shown.
Lay-in mount option only.
2 1/4”
2 1/4”
47
23
”
1/2
4 1/4”
1/2
47
15”
23 1/2”
”
”
1/2 ”
1/2 ”
1/2
51
49
4 1/4”
15
15
BOX PANEL MOUNT
RECESSED FLANGE
MOUNT: P/N 3331
P/N 3332
15
2 1/4”
1 1/4”
2 1/4”
15
4 1/4”
”
1/2
47 9 1/2” ”
4
1/2
51
15
27 23 1 ”
1/2 /2”
”
4 1/4”
15
23
”
47
”
1/2
15
4 1/4”
4 1/4”
1-800-854-0021
www.ldpi-inc.com
1/2
15”
94
SLIM LIGHT SERIES
PROJECT MGR:
JOB:
PN:
APPLICATIONS
DATE:
Paint Spray Booths
Clean Rooms
(Class 100 - 100,000)
Locker Rooms
Computer Areas
Damp Locations
Fuel Storage
Control Rooms for
Drilling Rigs
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
T3C 160°C
FEATURES:
A hinged front access door provides convenient access,
and the 2 1/4” depth minimizes the space needed.
LENS:
ELECTRICAL:
Paint spray cutoff switch in the front door frame.
Available in: 3 Ft. 25 watt T8 and 4 Ft. 32 and 54 watt T8, T8HLO or T5HO
Voltages of 120, 277, 347 and 480 Volts.
OPTIONS:
EM: Emergency battery backup ballast (excludes 390360)
120-277V MUST SPECIFY (T5HO EM fixture is 3 1/2” deep
HSR: High performance specular reflector (only available on 390 40 T8 and T8HLO)
HWR: High performance white reflector (only available on 390440 T8 and T8HLO)
Corner/hip mount #4714 - (available for the 390440J-3546 fixtur ONLY)
NOTE:
CAUTION:
95
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The Slim Light Series features a 20 gauge white powder coat housing that is only 2 1/4” thick maximizing the available space allowed for your paint spray booth.
The Slim Light Series is available in lengths of 3 and 4’ with 2, 4 or 6 lamp options. The 3’ fixtures are available in T8 25 watts. The 4’ fixtures are available in
32 and 54 watts T5HO, T8 or T8HLO. This series provides a hinged front access door with a paint spray cutoff switch when opened. ETL listed in the U.S. and
Canada, the Slim Light Series has multiple listings for inside access. Must be mounted hinge side up when wall mounted. Lamps not included.
SLIM LIGHT SERIES
www.ldpi-inc.com
3 FOOT SLIM LIGHT
Series
Watts
Lamp Qty
Hub
Order #
Voltage
390320 (2 lamp)
25W T8
2
2
1/2” NPT
1/2” NPT
390320
3613*
390320347 3276
120-277 Volts 50/60 Hz
347 Volts 60 Hz
390340 (4 lamp)
25W T8
4
4
1/2” NPT
1/2” NPT
390340
3546*
390340347 3125
120-277 Volts 50/60 Hz
347 Volts 60 Hz
390360 (6 lamp)
25W T8
6
6
1/2” NPT
1/2” NPT
390360
3546
390360347 3125
120-277 Volts 50/60 Hz
347 Volts 60 Hz
390420 (2 lamp)
32W T8
2
2
2
1/2” NPT
1/2” NPT
1/2” NPT
390420
3613*
390420347 3276
390420
6975
120-277 Volts 50/60 Hz
347 Volts 60 Hz
120-277 Volts 50/60 Hz
54W T5HO
2
2
1/2” NPT
1/2” NPT
390420
390420
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
32W T8
4
4
1/2” NPT
1/2” NPT
390440
3546*
390440347 3125
120-277 Volts 50/60 Hz
347 Volts 60 Hz
32W T8HLO
4
1/2” NPT
390440
6747
120-277 Volts 50/60 Hz
54W T5HO
4
4
1/2” NPT
1/2” NPT
390440
390440
4843*
5421
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
32W T8
6
6
1/2” NPT
1/2” NPT
390460
3546*
390460347 3125
120-277 Volts 50/60 Hz
347 Volts 60 Hz
32W T8HLO
6
1/2” NPT
390460
7059
120-277 Volts 50/60 Hz
54W T5HO
6
6
1/2” NPT
1/2” NPT
390460
390460
3265*
5420
120-277 Volts 50/60 Hz
347-480 Volts 50/60 Hz
4 FOOT SLIM LIGHT
32W T8HLO
390440 (4 lamp)
390460 (6 lamp)
*Normally stocked fixture.
Consult factory for lead times on non-stock products.
All options ordered separately
3265
5420
CAN SHIP VIA UPS
2 and 4 Lamp ONLY
Additional packaging
required.
TYPE
2 LAMP
4 LAMP
6 LAMP
E
10 3/4”
15 3/4”
20 3/4”
F
7”
12”
17”
3 FOOT SLIM LIGHT
38 1/4”
3 1/8”
E
16”
1 7/8”
16”
5/16” TYP
1/2” TYP
5/16” DIA.
10 Holes F
4 FOOT SLIM LIGHT
16”
16”
16”
E
5/16” TYP
1/2” TYP
50 7/8”
1-800-854-0021
www.ldpi-inc.com
A
B
C
D
390320
390340
390360
9 1/2”
14 1/2”
19 1/2”
13”
18”
23”
38”
38”
38”
39-7/8”
39-7/8”
39-7/8”
4 FT. 2 LAMP
4 FT. 4 LAMP
4 FT. 6 LAMP
390420
390440
390460
9 1/2”
14 1/2”
19 1/2”
13”
18”
23”
50”
50”
50”
51-7/8”
51-7/8”
51-7/8”
1/2 NPT
CONDUIT HUB
T5HO ONLY
50 1/4”
1 1/8”
MODEL
3 FT. 2 LAMP
3 FT. 4 LAMP
3 FT. 6 LAMP
NOTE: LIGHT FIXTURE’S GLASS FRAME EXTENDS 3/8” INTO BOOTH
WHEN MOUNTED IN BOOTH PANEL.
1 7/8”
38 7/8”
TYPE
21
CD
*
1 7/8”
5/16” DIA.
F
12 Holes
A
/4”
**
** (T5HO EM fixtur
is 3 1/2" deep)
*
B
* HUB LOCATIONS
1 7/8”
96
SLIM LIGHT SERIES
www.ldpi-inc.com
MOUNTING TEMPLATE
1/4 - 20 UNC X 1”
FASTENERS
P/N 1705
PAINT SPRAY
BOOTH PANEL
1/2 NPT
CONDUIT HUB
1/2 NPT
CONDUIT HUB
T5HO FIXTURE ONLY
EXTERIOR BOOTH PANEL
FOAM GASKETING
2-1/4” + 1/16”
INSTALLED
FIXTURE FLANGE
INTERIOR
BOOTH
PANEL
INSTALLATION
FASTENER
1/4-20 UNC X 3/4”
GLASS ASSEMBLY FRAME
FASTENER
3/8” (INSTALLED)
GLASS
97
1-800-854-0021
www.ldpi-inc.com
SLIM LIGHT SERIES
www.ldpi-inc.com
Horizontal or Vertical Mounting Corner/Hip Light Kit
The following is an acceptable method of installing panel mounted
fixtures into the corner of a paint spray booth
FEATURES
Part Number: 4714
Paint Booth Corner or Hip
Mount for fluorescent lightin
To reduce shadowing, corner or hip lighting is ideal.
Corner light mounting option is available for the
390440J-3546 Slim Light ONLY.
FIXTURE SOLD SEPARATELY
Shipping weight: 14#.
NOTE: All wiring must be performed by a certified electrician and in
accordance with all national and local electrical codes and regulations.
DESCRIPTION
Corner or Hip Mount Kit (PN 4714) for use with 390440J-3546 Slim Light fixture ON Y.
Can be installed vertically in a corner, or horizontally in the hip of the booth.
Includes all components required to install kit and route wiring conductors out of booth.
SPECIFICATIONS
KIT:
18 gauge galvanized panel
REQUIREMENTS:
For use with the 390440J-3546 Fixture only.
(Fixture Sold Separately)
Panel construction must meet the requirements of
NFPA 33 Chapter 3, “Construction and Design of Spray
Areas, Spray Rooms, and Spray Booths.”
OPTIONS:
77 5/16"
Fixture installation wiring to meet the requirements of
NFPA 33 Chapter 4, “Electrical and Other Sources of Ignition.”
Powder Coat Finish
Kit (delivered unassembled) Includes:
•
Self tapping screws to mount panel to booth
•
Bolts/Nuts to mount fixture to panel
•
Wire whip pre-wired to fixture
•
(4) feet of 1/2” Liquid-Tite Flexible conduit
•
90° Flex connector to exit booth
•
Straight flex connector to secure flex to fixt
•
(1) Tube of caulk to seal around panel and
fixture perimete
NOTE:
Mounting requires drilling 7/8” hole in booth
wall or ceiling to route flex conduit out of booth
1-800-854-0021
www.ldpi-inc.com
11 1/8"
98
16"
13/
13/
15
15
16"
22 1/2"
CFL SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Chemical Plants
Oil Refinerie
Offshore Platforms
Airplane Manufacturing
Waste Management
Steel Mills
Power Plants
Pulp and Paper Mills
Foundry Operations
LISTINGS:
UL 844
CSA 22.2 No. 137.0
UL 1598 Wet / Damp
CSA 22.2 No. 250.0
T3C 160°C
Class II D2 Groups E,F,G (pendant only) T3C 160°C
NEMA 4X
IP66
ELECTRICAL:
CFL (compact fluorescent) 13, 22, 26, 28 and 44 atts
Voltages: 120
HOUSING:
Cast copper-free aluminum with powder coated finis
Enclosed and gasketed
GUARD:
Cast guard
REFLECTOR:
Choice of dome or angle reflector
GLOBES:
Glass globes available as: clear, tempered, amber, blue, green and red
MOUNTING:
Pendant, ceiling, wall or stanchion
With Globe
and Guard
With Globe Guard and
Dome Reflecto
With Globe Guard and
Angle Reflecto
Pendant Mount
Ceiling Mount
Wall Mount
Stanchion Mount
99
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
The CFL Series is a cast copper-free aluminum fluorescent fixture with a powder coated finish rated for hazardous
locations and adverse environments. The colored globe options make this a positive visual marker for areas such
as safety eye wash locations, fire extinguishers, critical mete s, controls and other safety needs.
CFL SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
___ - ___ - ___ - ___ - ___
SERIES
VFA: Pendant mount
VFH: Fixture body for ceiling,
wall or stanchion mount
VFHA: Stanchion mount
VFHB: Wall mount no box
VFHBF: Wall mount Std. box
VFHF: Ceiling mount Std. box
HUB
1: 1/2” NPT hub*
2: 3/4” NPT hub
4: 1 1/4” NPT hub**
WATTS*
13: 13W (one 13W lamp)
26: 26W (two 13 W lamps)
44: 44W (two 22W lamps)
*VFH and VFHB - NO HUBS
** Stanchion mount only
VOLTAGE
120: 120V
___ - ___
GLOBE
G: Clear glass
GP: Clear glass and guard
TG: Tempered glass
TGP: Tempered glass and guard
ACG: Amber glass
BCG: Blue glass
GCG: Green glass
RCG: Red glass
ACGP: Amber glass and guard
BCGP: Blue glass and guard
GCGP: Green glass and guard
RCGP: Red glass and guard
OPTIONAL
REFLECTOR
RD: Dome reflecto
RA: Angle reflecto
PACKAGING
D: Unipak® packaging
(completely assembled
in one carton with lamp)
See Page 113
U: Unlamped
P: Lamped
Lamps available
on request
ELECTRIC LIGHTING FIXTURES FOR INDUSTRIAL AND HAZARDOUS LOCATIONS
VXB
VXA4
VR22P
1-800-854-0021
www.ldpi-inc.com
VXF
VFH
VFA
VGL22
VGL22
VGU22P
VGU22P
VR22P
VRA22P
100
VRA22P
CFL SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
REFLECTORS
MOUNTING
FIXTURE HANGER
HUB COVER
FOR VXF BOX
COVER
Cat. No.
Description
VR22P
Standard dome
Fiberglass reinforced polyester
VRA22P
30° angle reflecto
Cat. No.
Clear (heat resistant)
Red
Green
Blue
Amber
Description
VXB
Wall mount bracket arm
VXA4
Stanchion mount bracket arm
(conduit hub size 1 1/4”)
Cat. No.
Conduit hub size
VHC1
1/2”
VHC2
3/4”
Cat. No.
Description
VHC1
Flat cover for VXF box
GLASS GLOBES
Cat. No.
Wattage, maximum Lamp size
COLOR
STD. JUNCTION BOX
(1 3/4” INSIDE DEPTH)
FOR WALL OR CEILING
MOUNT FIXTURES
LAMPS
GASKET
101
Cat. No.
4 Hubs
5 Hubs
150 Watt
200-300 Watt
VGT15
VGT15R
VGT15G
VGT15B
VGT15A
VGT22
VGT22R
VGT22G
VGT22B
VGT22A
Conduit hub size
VXF10
VXFT10
1/2”
VXF20
VXFT20
3/4”
Cat. No.
Description
PLC-13
13W
PLC-22
22W
PLC-28
28W
Cat. No.
Description
GASK643
Gasket for hub covers, flat cove
and bracket arms
1-800-854-0021
www.ldpi-inc.com
CFL SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
Temperature Information
FIXTURE
WATTAGE
AMBIENT TEMPERATURE
CLASS I, DIVISION 2 T-NUMBER
Minimum
Maximum
SUPPLY WIRE
TEMPERATURE
13 Watt
0ºC(32ºF)
40ºC(104ºF)
110ºC
T3
T3
22 Watt
-29ºC(-20ºF)
40ºC(104ºF)
110ºC
T3
T3
26 Watt
0ºC(32ºF)
40ºC(104ºF)
110ºC
T3
T3
28 Watt
-29ºC(-20ºF)
40ºC(104ºF)
110ºC
T3
T3
44 Watt
-29ºC(-20ºF)
40ºC(104ºF)
110ºC
T3
T3
1-800-854-0021
www.ldpi-inc.com
102
Globe, Guard
Globe, Guard and Reflecto
380 SERIES
DATE:
PROJECT MGR:
JOB:
EXPLOSION PROOF LIGHTING
APPLICATIONS
PN:
Paint Spray Booths
Marine Outdoor
Chemical Plants
Oil Drilling Rigs, Refinerie
Grain Elevators
Coal and Dust Storage
LISTINGS:
UL 844
CSA 22.2 No. 137.0
CSA 22.2 No. 250.0
Class I D1 Groups C and D
Class III
Class I and II simultaneous presence
Zone 1, Group IIA, IIB
NEMA 3, 4X, 7CD, 9EFG
NFPA 33
NEC Article 516
T6 85°C
T4 135°C
T4 135°C
T4A 135°C
T4A 135°C
T4 135°C
FEATURES:
Factory sealed, cast natural aluminum (U.S. Foundry) that is lightweight.
Ballast mounted in the center for better balance and low profil .
(5) 1/2” NPT Hubs located at 0°, 45° and 90° angles.
REFLECTOR:
One piece painted aluminum reflecto
LENS:
.189" wall Borosilicate glass tubes
ELECTRICAL:
Available in 14, 17, 24, 28, 32, 44, and 54 watts
120-277 Volts (T5, T5HO, T8, and T8HO only)
120 Volts (T8HO)
277 Volts (T8HO)
347 Volts (T5HO and T8 only)
OPTIONS:
Optional polycarbonate shield and stainless steel guard.
EM: Emergency battery backup ballast - 4 Ft. 2 lamp ONLY
HB: 93% reflective specular reflector inse
103
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The 380 Series is a must for any explosive atmosphere location! This product has five different hub entries at each end, enabling the installer to wire the
fixture at more desirable angles. Center ballast placement provides a more balanced fixture for ease of installation and weight distribution. The 380 Series
is available in 2’ and 4’ lengths for 2, 3, and 4 lamp combinations in T5, T5HO, T8, and T8HO Lamps included.
380 SERIES
www.ldpi-inc.com
380 - ___ - ___ - ___ - ___ - ___
LAMP TYPE
T5**
T5HO*†
T8*†
T8HO**
LAMP QTY
2L: 2 Lamp†
3L: 3 Lamp†
4L: 4 Lamp†
LENGTH (Ft.)
2: 2 Ft.
4: 4 Ft.†
*5000K lamp standard for T5HO and T8 lamps
**4100K lamp standard for T8HO and T5 lamps
All T5, T5HO, T8, and T8HO are universal voltage
**T8HO Lamp Type not available in 2 Ft. fixture
*347 Volt only available in T5HO and T8.
3 and 4 Lamp fixtures not available in 2 Ft. length
3 lamp fixtures not available in T5 or T8HO
†
VOLTAGE
220: 220V 50 Hz
347: 347V
UNV: Universal Voltage†
120-277 50/60 Hz
(Available for T5, T5HO and T8 ONLY)
OPTIONS
EM: Emergency Battery
Back up Ballast
(4 Ft. 2 lamp ONLY)
HB: 93% Reflective specula
reflector inser
Normally stocked
Consult factory for non-standard fixture
Operating Temperature Codes Based on 40°C Ambient
FIXTURE
380
Class I, DIV 1
Groups
C and D
Class I, DIV 2
Groups
A, B, C, D
Class II, DIV 1
Groups
E, F, G
Class III
Simultaneous
Presence
Class I and II
T6 = 85°C
T4 = 135°C
T4 = 135°C
T4 = 135°C
T4 = 135°C
LAMP WATTAGES
WATTS
4 Ft.
14 Watt
T5
24 Watt
T5HO
17 Watt
T8
NA
T8HO
2 Ft.
T5
T5HO
T8
T8HO
WATTS
28 Watt
54 Watt
32 Watt
44 Watt
WEIGHTS
2 Lamp 2 Ft. Fixture
Fixture Weight: 30#
Shipping Weight: 33#
Fixture Weight: 40#
(EMERGENCY)
Fixture Weight: 57#
Fixture Weight: 45#
Fixture Weight: 80#
1-800-854-0021
www.ldpi-inc.com
104
380 SERIES
www.ldpi-inc.com
OPTIONS
STAINLESS STEEL GUARDS
Description
2-Lamp 2-Ft. Fixtures
POLYCARBONATE SHIELDS (+/- 1/16” thickness)
Catalog Number
4466
4211
4557
(2) 4211
Description
Catalog Number
4464
4209
4497
(2) 4209
MOUNTING OPTIONS
Wall/Ceiling mount kit
For 2 or 3 lamp
P/N 4401
Drop mount kit
2 or 3 lamp P/N 4405
4 lamp P/N 4403
Wall/Ceiling mount kit
For 4 lamp
P/N 4400
Must be factory installed
EMERGENCY BATTERY BACK-UP BALLAST
UL 844, 924, 1598A, 1598
Listed and labeled for hazardous locations
Class I Div. 1, Groups C and D, Class I Div. 2, Groups C and D
Class II Div. 1 and 2, Groups E, F and G.
Simultaneous presence of Class I and II
Class III, Class I, Zone 1, Groups IIA and IIB
Emergency lighting equipment for hazardous locations.
Non recessed marine luminaire, outside type (salt water).
Lumen output varies per lamp selection.
Equivalent to NEMA 4X requirements for hose-down and corrosion resistance.
Listed and labeled for use inside paint spray booths and rooms.
Meets requirements for NFPA 33 and NEC Article 516.
NEMA 3, 4X 7CD, 9EFG.
FEATURES OF EMERGENCY BACK-UP BALLAST
Only available as 4 Ft. 2 lamp fixtur
Vented battery compartment
Explosion proof test switch and charging indicator light
Minimum starting temperature 0º C (32º F)
Maintenance free emergency ballast/battery pack/charger
575 Lumen operation
3 year warranty
OPERATION
Operates normally on 120V, 277V, 60 Hz or 220V 50 Hz
When power fails the fixture automatically switches to
emergency mode. In emergency mode one lamp will provide
safe egress lighting for at least 90 minutes.
The fixture switches to charging mode and resumes normal
lighting once AC power is restored.
UL 595, 844, 924, 1598
105
1-800-854-0021
www.ldpi-inc.com
380 SERIES
www.ldpi-inc.com
2L 2FT. Dimensions
45° HUB
STD
HUB
7 1/4”
9”
90° HUB
45° HUB
7 1/4”
24 7/8”
29 5/8”
45° HUB
7 1/4”
STD
HUB
9”
90° HUB
13”
90° HUB
18 3/4”
2L 4FT. Dimensions
90° HUB
45° HUB
7 1/4”
48 7/8”
53 5/8”
3L 4FT. Dimensions
7 1/4”
45° HUB
STD
HUB
45° HUB
7 1/4”
48 7/8”
53 5/8”
4L 4FT. Dimensions
45° HUB
STD
HUB
7 1/4”
45° HUB
7 1/4”
48 7/8”
53 5/8”
1-800-854-0021
www.ldpi-inc.com
106
INDUCTION SERIES
HAZARDOUS LIGHTING
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Marine Locations
Offshore Platforms
Chemical Plants
Steel Mills, Refinerie
Machining Areas
Coal and Dust Applications
Parking Garages
LISTINGS:
UL 844
CSA 22.2 No. 137.0
Class I D2 Groups A,B,C,D T rating see chart
Zone 2 IIA, IIB, IIC
T rating see chart
T rating see chart
CLASS III
NEMA 4X
FEATURES:
60,000+ hour lamp life
Reduced maintenance/re-lamp operations
Instant on-instant restrike
Automatic switch-off in case of failure
Warm white light
Exceptional energy efficienc
-40°C to 40°C ambient operating range
Retrofits into existing H Series application
Acceptable for use with infrared remote control equipment operating at 36kHz
RFI approved for environments up to 1000 Mhz (FCC part reference luminaire)
ELECTRICAL:
Available in 165 watt induction lamp
Voltages: 120, 208, 240, 277 and 347
OPTIONS:
UNIPAK® (assembled fixture
HazCote™ (consult factory on lead time)
Reduce maintenance costs with LDPI, Inc. Induction Lighting:
•
•
•
•
•
Eliminates the need for expensive HID options such as quartz auxiliary lamps or instant restrike.
Reduces risk to installers performing maintenance in hard-to-reach places.
Reduces number of times necessary to de-energize entire circuit of lights for maintenance in hazardous locations.
Increases efficiency by decreasing machine shutdown time
Lowers cost of expensive rental of scissor lifts or bucket trucks.
107
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
When reliable lighting is required with the ability for instant on and long life, the Induction Series is right for the job! This classified
product is perfect for those hard to get to places that are abundant in many facilities. This product has an automatic switch off in
case of failure, provides warm white light and has exceptional energy efficienc . Designed to operate in ambient temperatures of
-40°C to +40°C and will retrofit to existing LDPI “H Series” ap lications.
INDUCTION SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
D - I - ___ - ___ - ___ - ___ - ___ - ___ - ___
STARTER
0: STD
Fixture
WATT
16: 165W
Induction
Lamp
BALLAST
E: Electronic
Induction
Ballast
VOLTAGE
12: 120V
60 Hz
06: 208/240/277V
50 or 60 Hz
34: 347V 60 Hz
HOUSING
L: Lg. Tank
OPTICAL
R5G: Type V
Refractor with
Wire Guard
R5: Type V
Refractor
___ - ___
MOUNT
B3: 1” Wall Mount
F2: 3/4” Flexible Pendant
F3: 1” Flexible Pendant
HV1: Hazvertor™ Ring
Class I Div. 2
HV2: Hazvertor Ring
Class II Div. 1
L4: 1-1/4” Straight Stanchion
L5: 1-1/2” Straight Stanchion
P2: 3/4” Rigid Pendant
P3: 1” Rigid Pendant
S4: 1-1/4” 25 Deg. Stanchion
S5: 1-1/2” 25 Deg. Stanchion
OPTIONAL
FINISH
T: HazCote™ **
UNIPAK
E: UNIPAK®
with lamp*
* See Page 113
** See Page 114
13 3/8"
(340)
13 3/8"
(365)
21 / "
12
(546)
Rigid Pendant
14 7/8"
(562)
Cone Pendant
16 1/8"
(378)
24 3/8"
Ceiling
15 3/4"
(410)
1-800-854-0021
www.ldpi-inc.com
Wall
(340)
23"
(584)
25° Stanchion
23"
(584)
13 3/8"
(400)
23"
(619)
(619)
(562)
(660)
(295)
24 3/8"
22 1/8"
26"
11 5/8"
22 1/8"
(410)
14 3/8"
(251)
(340)
16 1/8"
(378)
(340)
9 7/8"
13 3/8"
14 7/8"
13 3/8"
(340)
23 3/8"
(584)
Straight Stanchion
108
(594)
HazVertor™ Ring
HID FL SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Chemical Plants
Oil Refinerie
Waste Treatment Facilities
Steel Foundries
Power Plants
Pulp/Paper Facilities
Airplane Manufacturing
Grain Processing
LISTINGS:
UL 844
CSA 22.2 No. 137.0
NEMA 3R
ELECTRICAL:
HPS (High Pressure Sodium): (70 to 1000W)
MH (Metal Halide): (175 to 1000W)
Voltages: 120, 208, 240, 277 or 480
HOUSING:
Die cast aluminum housings and covers for excellent strength, light weight and
corrosion resistance. Hinged door swings down for easy relamping and maintenance
REFLECTOR:
Computer designed for optimal light distribution and efficienc
LENS:
Tempered glass lens resists thermal shock
Fully sealed and mechanically retained
MOUNTING:
Fully pivoting steel yoke
109
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
Flood lights for use in hazardous rated locations.
This fixture has a die cast housing and cover as well as a full pivoting steel yoke.
HID FL SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
FD - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP
S: High Pressure Sodium
H: Metal Halide
WATTS*
10: 100W (HPS only)
15: 150W (HPS only)
17: 175W
20: 200W
25: 250W
40: 400W
00: 1000W
STARTER
0: Standard Fixture (HPS)
BALLAST
P: Reactor
H: High Reactance
C: Constant Wattage
Autotransformer
Notes:
All floodlights for use with
mogul base lamps.
Standard color is gray.
MOUNT
Y: Yoke (trunnion)
HOUSING
0: Standard housing
(400 W max.)
L: Large housing
(1000W)
___ - ___
BEAM
N: Narrow beam (6x6)
(400W max.)
VOLTAGE
04: 120/208/277/240V (wired 120)
12: 120V
20: 208V
24: 240V
27: 277V
48: 480V
OPTIONAL
OPTIONS
OF: Single fuse
FF: Double fuse
PW: Pre-wired
3-1/2” cord
BRZ: Bronze color
BLK: Black color
UNIPAK
D: Unipak with diffuse coated lamp
E: Unipak with clear lamp
See Page 113
(Contact factory for other available voltages)
7 (179)
7(179)
17-3/5
(447)
21-7/16
(545)
23
(584)
21-1/8
(537)
20-1/2
(521)
2
(51)
12-1/2
(317)
5-1/2
(140)
1 (25)
13
(33)
2
(51)
7/16 (11)
25/32 (20)
5-1/2
(140)
23-71/6
(595)
19-1/2
(495)
YOKE MOUNT FLOODLIGHTS MOUNTING BRACKETS
INTEGRAL SLIPFITTER FLOODLIGHTS - MOUNTING BRACKETS
Cat. No.
Description
9901H
Steel Crossarm
Mounting Bracket
9605
9902H
Pole-Top
Mounting Bracket
9605-G
9920H
Universal Wall
Mounting Bracket
9352
Two Arm Pole-Top Bracket ("Bullhorn")
9333
Three Arm Pole-Top Bracket ("Bullhorn")
Cat. No.
ACCESSORIES
Cat. No.
75-8
75-V
Description
Wall Mount Pipe Bracket (2") with Flange (Prime Coated)
Wall Mount Pipe Bracket (2") with Flange (Galvanized)
Description
Polycarbonate
Vandal Shield
Glare Control
Shield
1-800-854-0021
www.ldpi-inc.com
110
HID H SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Chemical Plants
Automobile Assembly
Power Plants
Grain Processing
LISTINGS:
UL 844
CSA 22.2 No. 137.0
Class III D1
Class III D2
NEMA 4X
T rating see chart
T rating see chart
T rating see chart
T rating see chart
T rating see chart
ELECTRICAL:
HPS (50 to 400 watts)
MH - pulse start (70 to 400 watts)
Voltages: 120, 208, 220, 240, 277, 347 and 480
HOUSING:
Cast copper-free aluminum with powder coated finish - standard olor beige.
GUARD:
Polymeric, aluminum, or steel wire
GLOBE:
5 1/2” or 7 3/4” Dia. heat resistant
7 3/4” IES Type I, III or V,
12” Dia. IES Type II, V, (5 1/2” thread)
12” Dia. IES Type II, V (7 3/4” thread)
MOUNTING:
Rigid or flexible pendant, ceiling
Wall or cone pendant 25° stanchion,
Straight stanchion, HazVertor™ ring mount
OPTIONS:
ALL OPTIONS ORDERED SEPARATELY
Stainless steel inserts
Auxiliary quartz lamp
Fuse block
UNIPAK® (assembled fixture
HazCote™ (consult factory on lead time)
MORE APPLICATIONS
MOUNT OPTIONS
Pendant
Flex
Pendant
Cone
Ceiling
Wall
111
Oil Refinerie
Paint, Rubber Manufacturing
Offshore Platforms
Oil, Gas Transmission
Electronics Manufacturing
Pharmaceutical Plants
Aircraft Manufacturing
Grain Handling, Food Processing
Ammunition Manufacturing
Pulp and Paper Manufacturing
Copper, Aluminum Smelting
Steel Mills, Foundries
General Manufacturing Plants
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
The HID H Series has a powder coat finish over a cast copper-free aluminum housing designed for hazardous environments.
The product is available in wattages of 50 – 400W and HID lamp choice of MH (metal halide) or HPS (high pressure sodium).
Perfect for a multitude of applications such as chemical plants, automobile manufacturing and marine and coastal facilities, this fixture carries
many CSA and UL listings. The HID H Series also has an assortment of options from reflector choices, auxiliary quartz lamp and a 3-sided exit sign
attachment. Don’t forget the UNIPAK® option that provides a fully assembled product for ease of installation!
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
D - ___ - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP*
HP: Metal Halide - Pulse Start
WATT
05: 50W
07: 70W
10: 100W
15: 150W
17: 175W
20: 200W
25: 250W
40: 400W
STARTER
Starter Circuit/Quartz
0: Standard Fixture
Q: Quartz Auxiliary Option**
R: Instant Start
J: Auto Shutoff Starter
FINISH
T: HazCote™
Custom
Corrosion
Coating.
MOUNT
B3: 1” Wall Mount
F2: 3/4” Flexible Pendant
F3: 1” Flexible Pendant
HV1: HazVertor™ Ring - CI, D2
HV2: HazVertor™ Ring - CII, D1
P3: 1” Rigid Mount
HOUSING
Ballast Housing Style
0: Standard Housing
(150W HPS, 250W MH max.)
R: Refractor Globe Housing
(150W HPS, 250W MH max.)
L: Large Housing
(200-400W HPS; 400W MH)
S: Standard Housing
w/Stainless Steel Inserts
I: Refractor Globe Housing
M: Large Housing
BALLAST
H: High Reactance (≤150W)
C: Constant Wattage
Autotransformer
(All ballast high power factor.)
VOLTAGE
03: 120/277V, 60 Hz
04: 120/208/240/277V, 60 Hz
09: 120/240/347V, 60 Hz (CSA)
12: 120V, 60 Hz
27: 277V, 60 Hz
48: 480V, 60 Hz
225: 220V, 50 Hz
245: 240V, 50 Hz
___ - ___ - ___ - ___
OPTICAL
For Std. Housing Fixtures
(5-1/2” Thread)
TG: Thermal Shock Resist. Globe
TGL: TG with Polymeric Guard
SG: Tuffskin® Coated Globe
SGL: SG with Polymeric Guard
R2: 12” Glass Refractor, Type II
R5: 12” Glass Refractor, Type V
R2G: R2 with Wire Guard
R5G: R5 with Wire Guard
FUSING
F: Single Fuse
Block with Fuse
FF: Double Fuse
Block with Fuse
OPTIONAL
CSA
CSA Cert.
C: CSA
Nameplate
(Consult factory)
UNIPAK
UNIPAK® Packaging Options
E: w/ Clear Lamp
D: w/ Dual Arc Lamp (HPS only)
U: Unlamped
See NOTE for UNIPAK® packaging
options WITH reflector
NOTE:
H fixture with the "0" ballast housing
Standard reflector option (VR22P) use a
"1" after UNIPAK® selection.
30° angle reflector (VRA22P) use a "2"
after UNIPAK® selection.
H fixture with the "R" or "L" ballast housing
Standard reflector option (VR31P) use a
"1" after UNIPAK® selection.
30° angle reflector (VRA31P) use a "5"
Deep dome reflector (VRD31) use a "6"
For Refr. Globe Housing Fixtures
(7-3/4” Thread)
R1: 7 3/4” Refractor Globe, Type I
R3: 7 3/4” Refractor Globe, Type III
R5: 7 3/4” Refractor Globe, Type V
R1P: R1 with Polymeric Guard
TG: 7 3/4” Thermal Shock Res. Globe
TGP: TG with Polymeric Guard
For Large Housing Fixtures
(7-3/4” Thread)
TG: Thermal Shock Resist. Globe
TGC: TG with Cast Alum. Guard
SG: Tuffskin® Coated Globe
SGC: SG with Cast Alum. Guard
R2: 12” Glass Refractor, Type II
R5: 12” Glass Refractor, Type V
R2G: R2 with Steel Guard
R5G: R5 with Steel Guard
RCB: Enclosed High Bay Reflecto
RCG: RCB with Steel Wire Guard
Optical Refractor Types
All fixtures are for use with mogul base
lamps except for 150 watt metal halide
fixtures that use med. base lamps
*High pressure sodium (50 to 400 watts)
Metal halide (70 to 400 watts)
Lamps are not included unless “UNIPAK®
with lamp” packaging is specified
** Adding quartz restrike will be Class I Div. 2 ONLY with a T rating of 625°C
To order fixtures with “UNI AK® with
lamp” packaging add “E” to the end of
the catalog number.
For representational purposes only
1-800-854-0021
www.ldpi-inc.com
112
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
UNIPAK® Packaging
LDPI® HID fixtures ordered with UNI AK® packaging option will be completely assembled with lamp
(and with mounting cover and/or reflecto , if specified) and shipped in one carton. Each fixture sembly is foamed in place in the carton to insure zero transit damage. Receiving, handling,
storing, identification, assembly and component matching are al made easier by this common
sense approach to manufacturing and shipping.
Use catalog numbering codes (position #11) to add UNIPAK®
with lamp packaging to any made-to-order HID assembly.
Benefits of UNIPAK® packaging:
Fewer cartons to receive
Fewer cartons to store
Reduced job site material and handling cost
Lower installation labor cost
No chance of Lamp/Ballast mismatch in fiel
No waiting around for fixture
HazVertor™ Adaptor Ring
The HazVertor™ Ring is a UL listed adapter ring which gives you the freedom to replace Crouse-Hinds® VMV, LMV and
DMV series Champ® lighting fixtures with LDPI HID fixtures - without removing th Crouse-Hinds® mounting top hat from
the conduit system.
Just look at the advantages:
Increased energy efficiency and lumen output by upgrading from ercury vapor to metal halide or high pressure sodium.
Utilize threaded glass refractors for improved light distribution
Improved photometric performance in many cases.
Easy to order. Easy to install. UL listed.
For use with HID marine, or hazardous environment fixture
Not available for the compact fixture
113
1-800-854-0021
www.ldpi-inc.com
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
HV1
VP2
VF2
VA2
VC2
H3
STANDARD
TANK
VGT22
VGU22P
VR22P
VGU22
VB2
VS5
H3
"R"
TANK
VL5
H3
"L"
TANK
VRF22C5
VGT31S
VGL31R5
VRF31C5
VR31CB
VGT31
VGR48
VGU31RP
VGU31R
VGR48
VGR64
VGU31
VRA22P
HID Options
The options listed below plus many more
are available with LDPI HID fixtures
Instant Restart (50-150W HPS)
Allows high pressure sodium lamp to be
immediately restarted after a momentary
power outage.
Auxiliary Quartz Circuit - All
Fixtures use 120 volt 100W lamp quartz lamp circuit.
Quartz lamp will operate during HID warm-up period, or
when HID lamp cools down before restarting.
NEMA Lamp Wattage Decal - All
Adhesive back lamp wattage decal is provided on
ballast housing exterior to clearly indicate wattage
for relamping and maintenance.
Auto Shutoff Option (50-150W HPS)
Auto shutoff device prevents starter failure by
disabling the starter circuit in case of cycling or
defective HPS lamp.
(not for use with instant restart option.)
50 Hertz ballast (Most HID Fixtures)
50 Hertz ballast in a variety of voltages can be
furnished for international voltage systems.
1-800-854-0021
www.ldpi-inc.com
VR31P
VRA31P
VRD31
Tuffskin® Coated Glass Globes
(All globes)
Tuffskin silicone coating contains glass
particles in case of breakage, and prevents
glass from contaminating process areas.
HazCote™ Custom Corrosion Resistant Coating
(All)
Custom chemical coating provides even higher
degree of corrosion protection for cast aluminum
parts. For use in highly corrosive environments.
Dual Arc Tube Lamps (HPS)
Provide standby/immediate restart capabilities.
VR31P
VRA31P
UNIPAK® Packaging
(All)
UNIPAK® packaging means that fixtures are
completely assembled - with lamp if specified - and
foamed in one carton. Saves labor, handling, storage
and reduces total installed cost per fixture
HazVertor™ Adapter Ring
UL listed adapter ring enables quick, easy, UL listed
retrofit of Crouse-Hind ® VMV, LMV and DMV series
Champ® fixtures
Crouse-Hinds® and Champ® are registered
trademarks of Cooper Industries, Inc.
Stainless Steel Inserts (All)
Stainless steel inserts for guard screws and ballast
housing closure screw eliminate possibility of galvanic
corrosion between stainless steel screws and
aluminum parts.
114
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
MOUNTING COVERS
Mounting
Style
Rigid
Pendant
Cone
Pendant
Flexible
Pendant
Hub
Size
Cat.
No.
Mounting
Style
Wall
3/4”
1”
VP2
VP3
3/4”
1”
VA2
VA3
3/4”
1”
VF2
VF3
3/4”
1”
VC2
VC3
Ceiling
Hub
Size
Cat.
No.
3/4”
1”
VB2
VB3
REFLECTORS,
EXIT SIGN
Cat.
No.
VR22P
(see note)
VR31P
(see note)
25°
Stanchion
1 1/4”
1 1/2”
VS4
VS5
1 1/4”
1 1/2”
VL4
VL5
VRD31
VR31CB
Straight
Stanchion
HazVertor
Ring
VRA22P
(see note)
VRA31P
(see note)
HV2
HV3
VRE22
GLOBES,
REFRACTORS
Cat.
No.
VGT22
VGT31S
VGT31
VGL31R1
VGL31R3
VGL31R5
VRF22C2
VRF22C5
VRF31C2
VRF31C5
Description
Standard dome fiberglass
Reinforced polyester.
For use with standard housing
Standard dome fiberglass
reinforced polyester. For use
with “R” and Lg. housing
Deep dome anodized aluminum.
For use with “R”and large housings.
Must be line listed. Can not be UNIPAK®.
Enclosed high bay anodized
aluminum with lens. For use
with “R” or large housings
30° angle reflector fiberglas
reinforced polyester.
30° angle reflector fiberglas
reinforced polyester. For use
with “R” or Large housing
Three sided exit sign.
NOTE:
H or XP fixture with the "0" ballast housing
Standard reflector option (VR22P) use a "1" after UNIPAK® selection.
30° angle reflector (VRA22P) use a "2" after UNIPAK® selection.
Description
5 1/2” dia. heat resistant globe
(250W max)
For use with “R” housing
(250W max)
For use with large housing
(400W max)
7 3/4” IES Type I refractor globe
(250W max)
7 3/4” IES Type III refractor globe
(250W max)
7 3/4” IES Type V refractor globe
(250W max)
12” dia. IES Type II refractor
5 1/2” thread, for use with
standard housing
12” dia. IES Type V refractor
5 1/2” thread, for use with
standard housing
12” dia. IES Type II refractor
7 3/4” thread, for use with “R”
and large housings
12” dia. IES Type V refractor
7 3/4” thread, for use with “R” and
large housings
H or XP fixture with the "R" or "L" ballast housing
GUARDS
Cat.
No.
VGU22P
VGU31RP
VGU31R
115
Description
Polymeric guard for
VGT series globes
Polymeric guard for VGT31S
globe and VGL31R series
refractor globes
Cast aluminum guard for
VGT31S globe and VGL31R
series refractor globes
VGU31
Cast aluminum guard for
VGT31 globe
VGR48
Steel wire guard for all
VRF series 12” refractors
VGR64
Steel wire guard for VR31CB
enclosed high bay reflecto
1-800-854-0021
www.ldpi-inc.com
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
STANDARD BALLAST HOUSING WITH GLOBE AND GUARD (Nominal)
13 3/8"
13 3/8"
13 3/8"
13 3/8"
13 3/4"
18 11/32"
13 3/4"
FLEXIBLE PENDANT
RIGID PENDANT
14 7/8"
CONE PENDANT
15 3/4"
16 1/8"
16 3/4"
WALL MOUNT
14 1/2"
CEILING PENDANT
13 3/8"
15 3/16"
14 3/4"
15 3/16"
STRAIGHT STANCHION
HAZVERTOR™ RINGER
FOR LARGE BALLAST HOUSING WITH GLOBE AND GUARD ADD 7 5/8” (7.625) TO HEIGHT MEASUREMENT
STANDARD BALLAST HOUSING WITH 12” REFRACTOR AND GLOBE (Nominal)
13 3/8"
13 3/8"
13 3/8"
13 3/8"
RIGID PENDANT
FLEXIBLE PENDANT
14 7/8"
16 1/8"
CONE PENDANT
17 5/16"
CEILING PENDANT
15 3/4"
18 1/8"
19 9/16"
WALL MOUNT
21 1/4"
16 11/16"
16 11/16"
13 3/8"
18 1/8"
STRAIGHT STANCHION
17 9/16"
HAZVERTOR™ RINGER
FOR LARGE BALLAST HOUSING WITH 12” REFRACTOR AND GLOBE ADD 4 3/16” (4.1875) TO HEIGHT MEASUREMENT
1-800-854-0021
www.ldpi-inc.com
116
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
"R" TANK HOUSING WITH 7 3/4” REFRACTOR AND GUARD DIMENSIONS (Nominal)
"R" TANK HOUSING WITH 7 3/4” GLOBE AND GUARD DIMENSIONS (Nominal)
13 3/8"
13 / "
38
13 3/8"
13 3/8"
14 1/4"
RIGID PENDANT
FLEXIBLE PENDANT
14 7/8"
CONE PENDANT
16 1/8"
CEILING PENDANT
15 3/4"
16 5/8"
WALL MOUNT
14 1/2"
18 11/16"
14 1/4"
13 3/8"
15 3/16"
15 3/16"
STRAIGHT STANCHION
14 3/4"
HAZVERTOR™ RINGER
HID H SERIES CERTIFICATION GUIDE (40°C AMBIENT)
STANDARD BALLAST HOUSING 5 1/2” THREAD
LAMP
TYPE
WATTS
AMBIENT
TEMP
(Deg. C)
HIGH
PRESSURE
SODIUM
METAL
HALIDE
CLASS II
DIV. 1 and 2
GROUPS
CLASS I, DIV. 2
GROUP A, B, C, D
TEMPERATURE CODE
UL 595
MARINE
VGT/VGL22 5-1/2”
Globe, Guard
and Reflecto
VRF22C5
12” Dia.
Refractor
VGT/VGL22 5-1/2”
Globe, Guard and
Reflecto
VRF22C5
12” Dia.
Refractor
NEMA 4X
SUPPLY
WIRE
TEMP.
RATING
(Deg. C)
50
70
100
150
40
40
40
40
T3C
T3A
T2C
T2A
T4
T3C
T2D
T2B
EFG
EFG
EFG
–
EFG
EFG
EFG
EFG
YES
YES
YES
YES
YES
YES
YES
YES
85
85
85
90
70
100
175
250
40
40
40
40
T3C
T3A
T2A
T2
T3C
T3A
T2C
T2
EFG
EFG
–
–
EFG
EFG
EFG
EFG
YES
YES
YES
–
YES
YES
YES
YES
60
75
90
125
NOTES:
1.) Simultaneous Presence Applications: Some HID H Series fixtures are U Listed for simultaneous presence of gas and dust. Contact LDPI for specific information
2.) Tuffskin® Coated Optics: Many HID Series H fixtures are U Listed with Tuffskin® (silicone) coating on glass optics. Contact LDPI for specific nformation.
3.) For UL and CSA Certification Information on other ambient temperatures and fi ure configurations, consult the factor .
4.) Consult factory for fixtures with higher ambient temperatur ratings.
117
1-800-854-0021
www.ldpi-inc.com
HID H SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
"R" TANK BALLAST HOUSING 7 3/4” THREAD
LAMP
TYPE
WATTS
AMBIENT
TEMP
(Deg. C)
HIGH
PRESSURE
SODIUM
METAL
HALIDE
CLASS II
DIV. 1 and 2
GROUPS
CLASS I, DIV. 2
GROUP A, B, C, D
TEMPERATURE CODE
UL 595
MARINE
VGT31S 7-3/4”
Globe, Guard
and Reflecto
VGL31R5
7-3/4” Dia.
Refractor
VGT31S 7-3/4”
Globe, Guard and
Reflecto
VGL31R5
7-3/4” Dia.
Refractor
NEMA 4X
SUPPLY
WIRE
TEMP.
RATING
(Deg. C)
50
70
100
150
40
40
40
40
T3C
T3A
T2D
T2B
T3C
T3A
T3
T2B
EFG
EFG
EFG
EFG
EFG
EFG
EFG
EFG
YES
YES
YES
YES
YES
YES
YES
YES
60
85
85
85
70
100
175
250
40
40
40
40
T3C
T3A
T2B
T2
T3C
T3A
T2B
T2
EFG
EFG
EFG
EF
EFG
EFG
EFG
EF
YES
YES
YES
–
YES
YES
YES
YES
75
75
90
125
NOTES:
NOTE REGARDING GLASS GLOBES AND REFRACTORS — All LDPI fixture assemblies shown in the catalog as U Listed and CSA Certified for Marine applications
are suitable for hose-down when fixture is o f and glass has been allowed to cool. Tempered glass globes and refractors have better thermal shock resistance properties
than non-tempered globes and refractors and should be considered whenever fixtures are subject to being splashed with signific tly cooler liquids while illuminated (hot).
Consult factory for more information.
LARGE BALLAST HOUSING 7 3/4” THREAD
LAMP
TYPE
WATTS
AMBIENT
TEMP
(Deg. C)
CLASS II
DIV. 1 and 2
GROUPS
CLASS I, DIV. 2
GROUP A, B, C, D
TEMPERATURE CODE
UL 595
MARINE
VGT31
Globe, Guard
and Reflecto
VRF31C5
12” Dia.
Refractor
VR31CB
Reflecto
w/lens
VGT31
Globe, Guard
and Reflecto
VRF31C5
12” Dia.
Refractor
VR31CB
Reflecto
w/lens
NEMA 4X
SUPPLY
WIRE
TEMP.
RATING
(Deg. C)
HIGH
PRESSURE
SODIUM
200
250
400
40
40
40
T2
350° C
T2A
T2A
350° C
T2B
T2A
350° C
T2B
T2
350° C
T2A
T2A
350° C
T2B
T2A
350° C
T2B
YES
YES
–
YES
YES
YES
90
90
110
METAL
HALIDE
250
400
40
40
T2
350° C
T2A
325° C
T2A
325° C
T2
350° C
T2A
325° C
T2A
325° C
–
–
YES
YES
110
110
NOTES:
4.) Consult factory for fixtures with higher ambient temperatur ratings.
1-800-854-0021
www.ldpi-inc.com
118
HID H2 SERIES
DATE:
PROJECT MGR:
JOB:
HAZARDOUS LIGHTING
APPLICATIONS
PN:
Steel Mills
Offshore Platforms
Shipyards, Shipbuilding
Utility Power Plants
Breweries, Malt Plants
Grain Processing
LISTINGS:
UL 844
CSA 22.2 No. 137.0
Class I
D2 Groups A,B,C,D
Class III D1
Class III D2
NEMA 4X
IP 66
T rating see chart
T rating see chart
T rating see chart
T rating see chart
T rating see chart
ELECTRICAL:
MH - pulse start (70 to 100 watts)
Fluorescent (9 to 26 watts)
Incandescent (100 to 150 watts)
Voltages: 120
HOUSING:
Standard color beige.
GUARD:
Cast aluminum, polymeric
GLOBE:
Prismatic glass, high resistant prismatic glass,
Type I, III or V IES refractor, green prismatic glass
REFLECTOR:
Standard dome, 30° angle reflecto , exit sign
MOUNTING:
Rigid pendant, ceiling mount, wall mount, stanchion mount
MORE APPLICATIONS
MOUNT OPTIONS
Ceiling
Pendant
Stanchion
Wall
119
Oil Refinerie
Paint, Rubber Manufacturing
Oil, Gas Transmission
Electronics Manufacturing
Pharmaceutical Plants
Grain Handling, Food Processing
Copper, Aluminum Smelting
Automobile Manufacturing
Marine and Coastal Facilities
Foundries
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LIGHTING
SPECIFICATIONS
The HID H2 Series has a powder coat finish over a cast copper-free aluminum housing designed for hazardous environments. The product
is available in wattages of 9 – 150W and HID lamp choices of MH (metal halide), HPS (high pressure sodium) and compact fluorescent or
incandescent. Perfect for a multitude of applications such as waste treatment facilities, steel mills or offshore platforms, this fixture carries
many CSA and UL listings. The HID H2 Series also has an assortment of options from reflector choices to globes and guards. Don’t forget
the UNIPAK® option that provides a fully assembled product for ease of installation!
HID H2 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
D - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP
HP: Metal Halide - 100w max
F: Fluorescent
I: Incandescent
FINISH
T: HazCote™
Custom Corrosion
coating on all
Aluminum parts
(consult factory)
HOLDER
M: Medium Base Lamp holder
B: Bi Pin Type (Fluorescent)
WATTS
09: 9W
13: 13W
18: 18W
26: 26W
03: 35W
05: 50W
07: 70W
10: 100W
15: 150W (HPS only)
___ - ___ - ___
BALLAST
C: Constant Wattage
Autotransformer (CWA)
P: Reactor Type
0: Incandescent Lamp
No Ballast Circuit
MOUNT
P3: 1” Rigid Pendant
B2: 3/4” Wall
B3: 1” Wall
C2: 3/4” Ceiling
C3: 1” Ceiling
VOLTAGE
120: 120V
OPTIONAL
FUSING
F: Single Fuse
Block with Fuse
(HID only)
UNIPAK
U: Unlamped
options WITH reflector
NOTE:
H2 fixture with
Standard reflector option (VR15P)
use a “1” after UNIPAK® selection.
30° angle reflector (VRA15P)
use a “2” after UNIPAK® selection.
FOR UNIPAK® See Page: 113
FOR Hazcote™ See Page: 114
OPTICAL
TG: Tempered Globe Only (VGL 15)
TGL: Tempered Globe and Polymeric Guard
TGC: Tempered Globe and Cast Guard
R1: Type I (long and narrow) Glass Refractor
R3: Type III (asymmetric) Glass Refractor
R5: Type V (symmetric) Glass Refractor
R1P: Type I Refractor and Polymeric Guard
R3P: Type III Refractor and Polymeric Guard
R5P: Type V Refractor and Polymeric Guard
R5A: 8” Glass Refractor (Type V)
GCG: Green Glass Globe
Optical Refractor Types
For representational purposes only
1-800-854-0021
www.ldpi-inc.com
120
HID H2 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
REFLECTORS,
EXIT SIGN
OUTLET BOXES
Designed for Compact
Ballast Housings
Mounting
Style
Rigid
Pendant
Hub
Size
Cat.
No.
3/4”
1”
VMP2
VMP3
VMC2
VMC3
3/4”
1”
VMB2
VMB3
Description
VR15P
Standard dome
VRA15P
30° angle reflecto
VRE22
VGE22
Three sided exit sign
Red or Green
NOTE:
H2 or XP2 fixture with
Ceiling
3/4”
1”
Cat. No.
Wall
GUARDS
25°
Stanchion
90°
Stanchion
1 1/4”
1 1/2”
1 1/4”
1 1/2”
Cat. No.
VMS2
VMS3
VML4
VML5
GLOBES,
REFRACTORS
VGU15
Cast aluminum - for use with glass
globes or refractors
VGU15P
Polymeric - for use with
glass globes or refractors
VGR32
For use with glass closed bottom
refractors, (8” dia.)
Cat. No.
VL15
VGT15
VGL15R1
VGL15R3
VGL15R5
VRF22C5A
VGT15G
121
Description
Description
Prismatic glass 150 watts max.
Heat resistant prismatic glass
IES Type I refractor
IES Type III refractor
IES Type V refractor
8” IES Type V reflecto
Green prismatic glass
1-800-854-0021
www.ldpi-inc.com
HID H2 SERIES
www.ldpi-inc.com
HAZARDOUS LIGHTING
HID H2 SERIES
MARINE AND HAZARDOUS LOCATION FIXTURES DIMENSIONS (Nominal)
9 5/8''
8 5/8''
10 1/4''
1 3/4''
1 3/8''
14 9/16''
9 1/4''
2 7/8''
4 3/16''
4 3/16''
4 3/16''
6 1/2''
6 1/2''
6 1/2''
CEILING PENDANT
RIGID PENDANT
9 /16''
14
11''
2''
15 7/8''
/ ''
10
15 3/8''
7
1 ''
9 /4
4 9/16''
2 /8"
1 4
25°
4 3/16"
4 / ''
3 16
6 1/2"
6 11/16''
9 3/4''
15 7/8''
WALL MOUNT
15 7/8"
HID H2 SERIES CERTIFICATION GUIDE (40°C AMBIENT)
For UL844/595 listing at 40°C AMBIENT
FIXTURE
TYPE
HIGH
PRESSURE
SODIUM
FLUORESCENT
INCANDESCENT
WATTS
SERIES
CLASS I, DIV. 2
GROUP A, B, C, D
TEMPERATURE CODE
CLASS II
DIV. 1 and 2
GROUPS
Globe,and Guard
With or W/O
Reflecto
8”
Refractor
Globe,and Guard
With or W/O
Reflecto
CLASS III
DIV. 1 and 2
Globe,and Guard
8”
With or W/O
Refractor
Reflecto
NEMA 4X
UL 595
MARINE
8”
Refractor
35
50
70
100
150
DSM
DSM
DSM
DSM
DSM
T3A
T3
T2B
T2A
325° C
T3A
T3
T2B
T2A
325° C
EFG
EFG
EFG
EF
EF
EFG
EFG
EFG
EFG
EFG
YES
YES
YES
–
–
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
–
9
13
18
26
DFB
DFB
DFB
DFB
T3C
T3C
T3C
T3
T3C
T3C
T3C
T3
EFG
EFG
EFG
EFG
EFG
EFG
EFG
EFG
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
60
100
150
DIM
DIM
DIM
T3
T3
T2B
T3
T3
T2B
EF
EF
–
EFG
EFG
EFG
–
–
–
YES
YES
YES
YES
YES
YES
YES
YES
YES
NOTE REGARDING GLASS GLOBES AND REFRACTORS — All LDPI fixture assemblies shown in the catalog as U Listed and CSA Certified for Marine applications
are suitable for hose-down when fixture is o f and glass has been allowed to cool. Tempered glass globes and refractors have better thermal shock resistance properties
than non-tempered globes and refractors and should be considered whenever fixtures are subject to being splashed with signific tly cooler liquids while illuminated (hot).
Consult factory for more information.
1-800-854-0021
www.ldpi-inc.com
122
HID XP SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Paint Spray Booths
Grain Elevators
Chemical Plants
Marine Applications
Hose-Down Locations
LISTINGS:
UL 844
CSA 22.2 No. 137.0
NEMA 4X
T rating see chart
T rating see chart
T rating see chart
ELECTRICAL:
HPS: (50 to 400 watts)
MH: (70 to 400 watts)
FEATURES:
HID explosion proof fixture
Mogul base - except for 150 watt metal halide lamps that are medium base
50-400W
Voltages: 120, 208, 240, 277, 347, and 480
HOUSING:
Standard color beige.
GUARD:
Cast guard
REFLECTOR:
Choice of standard dome, deep dome, angle reflectors
MOUNTING:
Pendant, ceiling, stanchion or wall/bulkhead mount
MOUNTING OPTIONS
Pendant
Ceiling
Stanchion
123
Wall/Bulkhead
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
The HID XP Series has a powder coat finish over a cast copper-free aluminum housing designed for explosive and hazardous environments. The product is available in HPS (high
pressure sodium) (50 to 400 watts) and MH (metal halide) (70 to 400 watts). This series is perfect for explosive and hazardous environments such as grain elevators, petrochemical
plants, paint spray booths (100 watts max) and marine environments that call for Class I, Div. 1, Groups C and D or Class II, Div. 1 and 2, Groups E, F and G, UL 844 and 1598A
listings. The HID XP Series also has an assortment of options from reflector choices, auxiliary quartz lamp and a 3-sided exit sign attachment. Don’t forget the UNIPAK® option that
provides a fully assembled product for ease of installation!
HID XP SERIES
www.ldpi-inc.com
X - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP
C: High Pressure Sodium
(ANSI S-56 lamp)
HP: Metal Halide - Pulse Start
(100w max in a paint area)
STARTER
Quartz and Instant
Restart Options
0: Standard Fixture
Q: Fixture w/Auxiliary
Quartz option
R: Fixture with Instant
Restart option
(70, 100 and 150 HPS only)
WATTS*
05: 50W
07: 70W
10: 100W
15: 150W
17: 175W
25: 250W
40: 400W
GUARD
G: Cast Guard
Omit “G” if Guard
not required
BALLAST
C: Constant Wattage
H: Reactance Type (≤ 150W)
VOLTAGE
020: 480V
with 120V Tap*
030: 120/277V
040: 120/208/240/277
Multi-tap
120: 120V
480: 480V
340: 347V
___ - ___
MOUNT
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
S4: 1 1/4” Stanchion
OPTIONAL
FINISH
PS: UL listed fixture for paint spra
areas (selected Wattages)
100W or less
T: HazCote™ Custom Corrosion
coating on all aluminum parts
(consult factory for lead time)
PST: UL listed for paint spray
areas with HazCote™.
UNIPAK
U: Unlamped
options WITH reflectors
FOR UNIPAK® See Page: 113
FOR Hazcote™ See Page: 114
HP Pulse Start - Leave Blank
Notes:
XP fixture with
Deep dome reflector (VRD31) use a "6" after UNIPAK® selection.
*HPS (high pressure sodium) (50 to 400 watts)
MH (metal halide) (70 to 400 watts)
FLOODLIGHT (Trunnion Mount) Class I, Div. 1 (consult factory for T-ratings)
LAMP TYPE/WATTS
HIGH PRESSURE SODIUM
50
70
100
150
250
400
METAL HALIDE
175
250
400
NOTE: Fixture shown with Dome Reflector and Guard
These are not included in the catalog number.
Please see HID XP Accessories specific to Floodlighting
1-800-854-0021
www.ldpi-inc.com
CATALOG NUMBER:
Includes: Fixture, trunnion and 3/4” conduit
XS005H030
XS007H040-G-P2TRE
XS010H040-G-P2-TRE
XS015H040-G-P2TRE
XS025C040-G-P2TRE
XS040C040-G-P2TRE
XHP17C040-G-P2TRE
XHP25C040-G-P2TRE
XHP40C040-G-P2TRE
HID XP SERIES FLOODLIGHT ACCESSORIES
ACCESSORIES
Angle Reflecto
Dome Reflecto
Cast Guard
Cast Guard
Pole-Top Mount
CATALOG NUMBER
VRA31
VR31
XGU44 (50-150 H.P.S., 175/250 M.H. or 100-250 M.V.)
VGU 31 (250/400 H.P.S., 400 M.V. or 400 M.H.)
9902 (slipfitter mounting). Fits 2" or 2 1/2" pipe
(2" pipe intrudes 3 1/16"; 2 1/2" pipe intrudes 2 3/4".)
Furnished with mounting bolts set screws
124
HID XP SERIES
www.ldpi-inc.com
OUTLET BOXES
Mounting
Style
Hub
Size
Cat.
No.
REFLECTORS
Pendant
3/4”
1”
XP2
XP3
3/4”
1”
XC2
XC3
Ceiling
Wall
3/4”
1”
XB2
XB3
3/4”
1”
XJ2
XJ3
1 1/4”
1 1/2”
XS2
XS3
Cat. No.
Description
VR31P
Standard dome
VRD31
Deep dome steel with
anodized aluminum finis
VRA31P
30° angle reflecto
NOTE:
H or XP fixture with the "R" or "L" ballast housing
Deep dome reflector (VRD31) use a "6" after UNIPAK® selection.
Bulkhead
Stanchion
GUARDS
REPLACEMENT
GLOBES
Cat. No.
Description
XGU44
Cast aluminum, powder finis
VGU31
Used on all 400 watt fixtures and 250 watt
HPS and MH fixtures
Cat. No.
XGSA44
XGSA44A
125
Description
Replacement globe assembly
50-250 watts
400 watts
1-800-854-0021
www.ldpi-inc.com
HID XP SERIES
PENDANT MOUNT
WITH GLOBE AND GUARD
BULKHEAD MOUNT
WITH GLOBE, GUARD AND REFLECTOR
WALL MOUNT
1-800-854-0021
www.ldpi-inc.com
WALL MOUNT
WITH GLOBE
AND GUARD
www.ldpi-inc.com
CEILING MOUNT
STANCHION MOUNT
CEILING MOUNT
126
PENDANT MOUNT
BULKHEAD MOUNT
HID XP SERIES
www.ldpi-inc.com
HID XP SERIES EXPLOSION PROOF (400 SERIES) FIXTURES
PENDANT MOUNT WITH
GLOBE AND GUARD
WALL MOUNT WITH
GLOBE, GUARD AND REFLECTOR
STANCHION MOUNT WITH
127
CEILING MOUNT WITH
1-800-854-0021
www.ldpi-inc.com
HID XP SERIES
www.ldpi-inc.com
HID XP SERIES CERTIFICATION GUIDE (40°C AMBIENT)
(With or
Without
HIGH
PRESSURE
SODIUM
CLASS I, DIV. 1
GROUPS C and D
WATTS
FIXTURE
TYPE
Instant
Restart)
With
Auxiliary
Quartz
METAL
HALIDE
With
Auxiliary
CLASS II
DIV. 1 and 2
CLASS III
DIV. 1 and 2
NEMA 4X
(Suitable
for
Hosedown)
UL 595
MARINE
Rated Temp
°C
“T”
No.
Rated Temp
°C
Groups
50 §
70 §
100 §
150 (S55)
150(S56)
250
400
85
85
100
120
120
120
160
T6
T6
T5
T4A
T4A
T4A
T3C
100
120
135
160
160
–
–
EFG
EFG
EFG
EFG
EFG
–
–
YES
YES
YES
YES
YES
–
–
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
50
70
100
150(S55)
150(S56)
120
120
160
160
160 +
T4A
T4A
T3C
T3C
T3C
160
160
200
200
–
EFG
EFG
EF
EF
–
YES
YES
–
–
–
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
175
250
400
120
160
165
T4A
T3C
T3B
180
200
–
EF
EF
–
–
–
–
YES
YES
YES
YES
YES
YES
175
250
160 +
180 +
T3C
T3A
–
–
–
–
–
–
YES
YES
YES
YES
Quartz
§ These fixtures suitable (U listed) for use in paint spray areas.
+ UL listed at 25° C
NOTE REGARDING GLASS GLOBES AND REFRACTORS — All LDPI fixture assemblies shown in the catalog as U listed and CSA certified for marine
applications are suitable for hose-down when fixture is o f and glass has been allowed to cool. Tempered glass globes and refractors have better thermal
shock resistance properties than non-tempered globes and refractors and should be considered whenever fixtures are subject to eing splashed with
significantly cooler liquids while illuminated (hot). Consult f ctory for more information.
1-800-854-0021
www.ldpi-inc.com
128
HID XP2 SERIES
DATE:
PROJECT MGR:
JOB:
APPLICATIONS
PN:
Paint Spray Booths
Grain Elevators
Chemical Plants
Marine Applications
Hose-Down Locations
LISTINGS:
UL 844
CSA 22.2 No. 137.0
NEMA 4X
T rating see chart
T rating see chart
T rating see chart
ELECTRICAL:
Fluorescent (9 to 26 watts)
Voltages: 120
HOUSING:
REFLECTORS:
Choice of standard dome, angle reflectors
GUARD:
Cast guard
MOUNTING:
Pendant
Ceiling
Wall
Bulkhead
Stanchion
SPECIFICATIONS
The HID XP2 Series has a powder coat finish over a cast copper-free aluminum housing designed for explosive and hazardous environments.
The product is available in HID lamp choice of HPS (high pressure sodium) (35 – 150 watts). This series is perfect for explosive and hazardous
environments such as grain elevators, petrochemical plants, paint spray booths (100 watts max) and marine environments that call for Class I,
Div. 1, Groups C and D, or Class II, Div. 1 and 2, Groups E, F and G, UL 844 and 1598A listings. The HID XP2 Series also has an assortment of
options from reflector choices to globes and guards. Don’t forget the UNIPAK® option that provides a fully assembled product for ease of installation!
MOUNTING OPTIONS
Pendant
Ceiling
Bulkhead
Wall
129
Stanchion
1-800-854-0021
www.ldpi-inc.com
HID XP2 SERIES
www.ldpi-inc.com
X - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP
WATTS*
03: 35W
05: 50W
07: 70W
75: 75W
10: 100W
15: 150W
HOLDER
M: Medium Base Lamp holder
GUARD
G: Cast Guard
Omit “G” if
Guard not
required
MOUNT
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
VOLTAGE
120: 120V
BALLAST
C: Constant Wattage
P: Reactor Type (HPF)
(HPS Only)
Notes:
OPTIONAL
___ - ___
FINISH
PS: UL listed fixture for paint spra
areas (selected Wattages)
T: HazCote™ Custom Corrosion
coating on all Aluminum parts
(consult factory for lead time)
PST: UL listed for paint spray
areas with HazCote™.
UNIPAK
U: Unlamped
*HPS (high pressure sodium) (35 to 150 watts)
XP2 fixture with
options WITH reflectors
For UNIPAK® See Page: 113
For HazCote™ See Page: 114
COMPACT FLUORESCENT OPTION
X - ___ - ___ - ___ - ___ - ___ - ___ - ___
LAMP
F: Fluorescent
WATTS*
09: 9W
13: 13W
18: 18W
26: 26W
HOLDER
B: Bi-Pin/ PL lamp
GUARD
G: Cast Guard
Omit “G” if
Guard not
required
MOUNT
P2: 3/4” Pendant
P3: 1” Pendant
B2: 3/4” Wall
B3: 1” Wall
J2: 3/4” Bulkhead
J3: 1” Bulkhead
C2: 3/4” Ceiling
C3: 1” Ceiling
VOLTAGE
120: 120V
BALLAST
P: Reactor Type (HPF)
1-800-854-0021
www.ldpi-inc.com
___
OPTIONAL
UNIPAK
D: Unipak with diffuse coated lamp
Fluorescent fixtures use P type lamps (one or two lamps included).
GUARD: If a guard is not required delete one “G” from the catalog number.
Verify Hazardous Location Certification with your requirements
130
HID XP2 SERIES
www.ldpi-inc.com
OUTLET BOXES
Mounting
Style
Pendant
Ceiling
Wall
Bulkhead
Stanchion
Hub
Size
Cat.
No.
3/4”
1”
XP2
XP3
3/4”
1”
XC2
XC3
REFLECTORS
XB2
XB3
3/4”
1”
XJ2
XJ3
1 1/4”
1 1/2”
XS2
XS3
REPLACEMENT
GLOBES
VR15P
Standard dome
VRA15P
30° angle reflecto
Cat. No.
Description
XGU15
VRE22
VGE22
Exit sign: red or green
Cat. No.
XGSA15
HID XP2 SERIES EXPLOSION PROOF DIMENSIONS
RIGID PENDANT WITH
GLOBE AND GUARD
Description
NOTE: H2 or XP2 fixture with
GUARDS
3/4”
1”
Cat. No.
Description
35-150 watts
CEILING MOUNT WITH
GLOBE AND GUARD
WALL MOUNT WITH
GLOBE GUARD AND 30°
ANGLE REFLECTOR
STANCHION MOUNT WITH
GLOBE GUARD AND 30°
ANGLE REFLECTOR
WALL MOUNT WITH
GLOBE AND EXIT SIGN ACCESSORY
131
CEILING MOUNT WITH
GLOBE, GUARD AND
DOME REFLECTOR
* TANK DIM: HPS 9”
INCAN 7”
FLUOR 5-11/16”
1-800-854-0021
www.ldpi-inc.com
HID XP2 SERIES
www.ldpi-inc.com
HID XP2 SERIES CERTIFICATION GUIDE (40°C AMBIENT)
FIXTURE
TYPE
CLASS I, DIV. 1
GROUPS C and D
CLASS I, Div. 2,
GROUPS A,B,C and D
WATTS
CLASS II
DIV. 1 and 2
CLASS III
DIV. 1 and 2
NEMA 4X
(Suitable
for
Hosedown)
UL 595
MARINE
Rated Temp
°C
“T”
No.
Rated Temp
°C
Groups
35 §
50 §
70 §
100 §
150 +
85
85
100
120
135
T6
T6
T5
T4A
T4
100
120
135
160
–
EFG
EFG
EFG
EFG
–
YES
YES
YES
YES
–
YES
YES
YES
YES
YES
YES
YES
YES
YES
YES
INCANDESCENT
100
150
100
120
T5
T4A
160
200
EFG
EF
YES
–
YES
YES
YES
YES
FLUORESCENT
18 § +
26 § +
85
85
T6
T6
85
85
EFG
EFG
YES
YES
YES
YES
YES
YES
HIGH
PRESSURE
SODIUM
§ These fixtures suitable (U listed) for use in paint spray areas.
+ UL listed at 25° C
NOTE REGARDING GLASS GLOBES AND REFRACTORS — All LDPI fixture assemblies shown in the catalog as U listed and CSA certified for marine
applications are suitable for hose-down when fixture is o f and glass has been allowed to cool. Tempered glass globes and refractors have better thermal
shock resistance properties than non-tempered globes and refractors and should be considered whenever fixtures are subject to eing splashed with
significantly cooler liquids while illuminated (hot). Consult f ctory for more information.
T - Number Table
1-800-854-0021
www.ldpi-inc.com
T - Number
Maximum
Temp. ° C
T - Number
Maximum
Temp. ° C
T1
450
T3A
180
T2
300
T3B
165
T2A
280
T3C
160
T2B
260
T4
135
T2C
230
T4A
120
T2D
215
T5
100
T3
200
T6
85
132
CART SERIES
DATE:
PROJECT MGR:
JOB:
TA S K / I N S P E C T I O N / H A Z A R D O U S
APPLICATIONS
PN:
4 Ft. Single
Fixture Cart
Task Areas
General Industrial
Portable Inspection Areas
FIXTURE:
LISTINGS:
ETL listed. U.S. and Canada
INS: Non-Hazardous
I: UL 1598 ONLY
ELECTRICAL:
Available in 32 watt with T8 lamps
Voltage: 120 Volts or 277 Volts
OPTIONS:
CART OPTIONS
Shelf trays: 20 1/2” W x 8” D x 3” H (Qty 2) (P/N 7638)
included)
FIXTURE ONLY
FIXTURE OPTIONS
INS: Inspection with tempered, striped lens (lamps included)
I: Task/Open industrial with polycarbonate lens (lamps
REPLACEMENT PARTS
Polycarbonate replacement Lens (P/N 7756)
F32-T-8 Lamp, 5000K - (Recommended)
Optional Shelf Tray (2 per cart)
20 Ft.
Power Cord
4346 - ___ - ___
SERIES
4346: LIGHT CART
FIXTURE
INS: Inspection (Tempered, striped glass)
I:
Open industrial (UL 1598)
VOLTAGE
120: 120V standard
277: 277V optional
Cart Frame
8” Semi-Pneumatic
Ball Bearing Wheels
133
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
2 WHEEL VERTICAL CART: P/N 4346
8” semi-pneumatic ball bearing wheels, 20’ power cord with a 3 prong, 120 Volts 15 amp plug or 277 Volts 15 amp plug available. Must specify.
NEMA rated power cord plugs other than specified can be provided. The single fixture light cart is designed to provide portable lighting solutions for
applications ranging from inspection to laboratory and general industrial task lighting. Light fixture options allow you to customize your cart to fit your
work application requirements. Some assembly required. Lamps included.
CART SERIES
DATE:
PROJECT MGR:
JOB:
PN:
APPLICATIONS
Standard 10”
Pneumatic Tires
Vertical Mount
Horizontal Mount 2 Fixture Only
Shown with optional tool tray
3 Fixture Inspection Cart
General Industrial
Portable Inspection Areas
FIXTURE:
LISTINGS:
ETL listed. U.S. and Canada
INS: Inspection
I: UL 1598 ONLY
ELECTRICAL:
Voltage: 120 Volts or 277 Volts
Amperage: 15 amps standard
OPTIONS:
CART OPTIONS
Vertical or horizontal fixture mount (1 or 2 fixture carts onl
Outlet box with 1 duplex outlet available for 120 Volts carts P/N 7641
Tool tray with adjustable shelves P/N 7640
NEMA rated power cord plug, other than specified, can be provided
FIXTURE ONLY
FIXTURE OPTIONS
INS: Inspection with tempered, striped lens (lamps included)
(vertical mount recommended)
I: Task/open industrial (lamps included)
REPLACEMENT PARTS
Polycarbonate lens
F32-T-8 lamp, 5000K - (recommended)
25 Ft. Main
Power Cord
___ - ___ - ___ - ___
SERIES
3668: 2 Fix. Cart
3669: 3 Fix. Vertical Cart
4520: 1-4 Ft. Horizontal Cart
WHEELS
P: 10” Tires
Pneumatic (Std)
FIXTURE
INS: Inspection
(Tempered, striped glass)
I: Open Industrial (UL 1598)
VOLTAGE
120: 120V standard
277: 277V optional
Optional Tool
Tray With
Adjustable
Shelves
Optional
Outlet Box
Standard 10”
Pneumatic Tires
Notes:
P/N 3668H and 3669H are Class I Div. 2 hazardous location carts.
These carts are assembled with a stationary fixture mounting br cket.
P/N 3669 and 3669H 3 Fixture carts: vertical mounting position ONLY.
P/N 3668H: Must specify vertical or horizontal mounting.
Add a V or H to the end of the part number.
1-800-854-0021
www.ldpi-inc.com
3 Fixture Cart
Vertical Mount ONLY
134
Standard 10”
Non-Swivel
Pneumatic Tires
SPECIFICATIONS
The 4 Ft. 2 and 3 fixture light carts are designed to provide portable lighting solutions for applications ranging from inspection to laboratory and
general industrial task lighting. A 4 Ft. single fixture horizontal mount cart is also available for all fixture types. Fixtures are attached with swivel
Mounting brackets allowing for directional aiming of the light. ASSEMBLY REQUIRED. Black finish with standard 10” pneumatic tires. (2) swivel (2)
non-swivel. Standard 25’ power cord with a 3 prong 120 Volts 15 amp plug. Optional 277 Volts 15 amp plug available. Must specify.
4520: 1-4Ft.
Horizontal Fixture
DATE:
PROJECT MGR:
JOB:
EXPLOSION PROOF LIGHT CART
PN:
APPLICATIONS
XP CART SERIES
380 Series Cart 4 Lamp
Hazardous Locations
Paint Inspection Areas
Corrosive Environments
Aircraft Hangars
Maintenance Pits
FIXTURE
LISTINGS:
UL listed 844 U.S. and Canada for hazardous locations
UL listed 1598 U.S. and Canada for wet locations
UL listed 1598A U.S. and Canada for marine locations
FEATURES
For either 2, 3 or 4-lamp 4 foot fixtur
5” non-sparking casters (1 pair fixed, 1 pair swivel
360° non-continuous adjustable fixture rotatio
Lamps, polycarbonate shield and stainless steel guard: ALL INCLUDED
ELECTRICAL:
Available in 28, 32, 34, 44, 54 and 60 watt with T5, T5HO, T8 and T8HO lamps
Voltages: 120
50 Ft. of S.O. electric cable suitable for rough duty use
Explosion proof switch
Explosion proof plug - 120 Volts (P/N 3825)
HOUSING:
Frame constructed of corrosion resistant aluminum
REFLECTOR:
One piece aluminum reflecto
LENS:
Clear tempered glass tubes, polycarbonate shield.
MOUNTING:
Fixture mounted to 360° (non-continuous) adjustable rotating brackets
OPTIONS:
2 lamp model (P/N 4372-2)
FIXTURE ONLY
380 Cart 2 Lamp
135
1-800-854-0021
www.ldpi-inc.com
SPECIFICATIONS
Lighting for Explosive Environments - The 380 Portable Light Cart is manufactured in accordance with applicable NFPA standards.
For use in hazardous environments and laboratory applications. Portable lighting solutions for hazardous atmospheres.
Light can be directed where you need it most. Fixture(s) sold separately.
XP CART SERIES
www.ldpi-inc.com
___ - ___ - ___ - ___ - ___ - ___ - ___
CART
4372-2: (2 Lamp cart)
4372-3: (3 Lamp cart)
4372-4: (4 Lamp cart)
SERIES
380
LAMP TYPE
T5**
T5HO*
T8*
T8HO**
LAMP QTY
2: 2 Lamps
3: 3 Lamps
4: 4 Lamps
LENGTH
4: 4 Ft.
VOLTAGE
120: 120V
OPTIONS
HB: 93% Reflective
specular reflector inser
LAMP WATTAGES
4 Ft. Lamp
Wattage
T5
28W
T5 H.O.
54W
T8
32W
T8 H.O.
44W
Notes:
*5000K lamp standard for T5HO and T8 lamps
**4100K lamp standard for T8HO and T5 lamps
All T5, T5HO and T8 are universal voltage
3 lamp fixtures not available in T8HO
DIMENSIONS
2, 3 and 4 Lamp Cart
A
B
C
D
E
—
—
—
—
—
58”
24”
24 3/4”
27 5/8”
29 9/16”
®
Note: LDPI
recommends consulting local
authorities for approval of your
application prior to purchase.
A
B
4 LAMP
2 LAMP
D
C
1-800-854-0021
www.ldpi-inc.com
B
136
E
CUSTOM APPLICATIONS
LIGHT FIXTURE CUSTOMIZING OPTIONS
www.ldpi-inc.com
Need a Custom or Special Fixture?
LDPI, Inc. is an excellent source for that special needs custom lighting fixture
LDPI, Inc. has the in-house engineering and manufacturing experts to handle most any need for Harsh or Hazardous Environments.
To have someone contact you for that special or custom need:
email us at: [email protected]
or call our toll free number: 1-800-854-0021.
Examples of Custom Applications:
Paint Booths
Inspection Areas
Waste Water Treatment Facilities
Warehousing
Military Applications
Laboratories
Oil Refinerie
Offshore Rigs
Chemical Plants
Breweries
Grain Handling
Food Processing
Coal, Gold, Copper, Silver Mining
Steel Mills and Foundries
Utility Power Plants
Marine and Coastal Facilities
Automobile Manufacturing
Shipyards and Ship Building
Flour, Sugar, Starch Processing
Paint Manufacturing
Rubber Manufacturing
Aerospace Facilities
Airplane Hangers
Boat Dry Stack
Boat Painting
and more...
Undercarriage inspection cart
376 Series: wet/damp inspection cart
229S Custom Fixture
137
1-800-854-0021
www.ldpi-inc.com
LENS PROTECTION
www.ldpi-inc.com
FOR LDPI, INC. FIXTURES
FIXTURE PRESERVATION
CLING-ON PLASTIC LENS FILM
•
3 Mil plastic with custom acrylic adhesive
•
Protects lens coverings from overspray
•
Applies easily to clean lens
•
Available In 12”, 18” and 25” widths
•
100 Feet per roll
12” Film - Part Number: 3263
Single Roll or Case of 4
Single Roll or Case of 2
Single Roll
NOTE: Does not fit on 3312 Handle
Dispenser Handle - Part Number: 3312
NOTE: For 12” and 18” Film Rolls ONLY
BLAST BOOTH LENS COVER
For use with the Slim Light and 400 Series
Blast
Booth Panel
Booth
Interior
24 3/4”
(4 lamp)
30 7/8”
(6 lamp)
Fasteners
Not Included
in Kit
29”
• Helps protect fixture from
high pressure blast media
• 1/16” clear polycarbonate lens
• Lenses are easily interchangeable
• Perfect for rear access fixture
29”
• For front access, lens cover needs
to be removed for relamping.
2 3/4”
For use with 4 lamp fixture
1-800-854-0021
www.ldpi-inc.com
For use with 6 lamp fixture
Lens Kit - P/N 3318
Lens Kit - P/N 7668
Lens Only - P/N 3316
Lens Only - P/N 7682
138
HAZARDOUS LOCATION
www.ldpi-inc.com
CLASSES AND ZONES
CLASSES
Class I, Gas or Vapor
(NEC Article 500-5, 5001-9)
Areas where inflammable gases or vapors may be present in suffi ent quantities to produce an explosive or flammable mixture
Class II, Dust
(NEC Article 500-6, 502-11)
Areas where combustible dusts are present in sufficient quantit es to produce a hazardous environment.
Class III, Fiber
(NEC Article 500-7, 503-9)
Areas where ignitable fibers or flyings are present in sufficie quantities to produce ignitable mixtures.
DIVISIONS
Division 1, Always Present
(NEC Article 500-5a, 500-6a, 500-7a, 502-11a)
Areas where the hazardous condition is normally present, either continuously or periodically.
Division 2, Not Normally Present
(NEC Article 500-5b, 500-6b, 500-7b, 500-9b, 502-11b)
Areas where the hazardous condition is present due to accidental rupture, release, breakage, or unusual faulty operation of a closed container or system.
GROUPS (NEC Article 500-2, 500-3)
Class I
Class II
Group A - Acetylene
Group E - Metal Dust
Group B- Hydrogen
Group F - Coal Dust
Group C - Ether
Group G - Grain Dust
Group D - Gasoline
ZONAL CLASSIFICATIONS
IEC publication 79-10 defines the guidelines for classifying ha ardous area. Instead of using Classes and Divisions, the term Zones is used as defined belo .
Zone 0 - Is an area in which an explosive gas or vapor is continuously present or present for long periods, typically more than 1,000 hours per year. Generally, most
industrial users try to keep all electrical equipment out of the Zone 0 area. The only equipment approved is intrinsically safe equipment.
Zone 1 - Is an area in which an explosive gas atmosphere is likely to occur in normal conditions for more than 10 hours per year and less than 1,000 hours per year.
Zone 2 - Is defined as an area in which explosive gas or vapor atmosp eres are not likely to occur and if it does, it is only for a short period of time, typicaly less
than 10 hours per year.
Zone 20 - Is an explosive atmosphere, resulting from dust which is present continuously.
Zone 21 - This is defined as an atmosphere where dust is occasionally pre ent.
Zone 22 - This is defined as an atmosphere where dust is not normally pre ent.
NOTE: Class III locations (fibers & flyings) are covered in Zo
20, 21, & 22.
CLASSIFICATION COMPARISONS
Hazardous
Material
Gas or Vapor
Dust
Fibers or Flyings
TEMPERATURE MARKINGS
NEC U.S.
Standards
IEC Euronorm
Standards
Class I, Div. 1
Zone 0 & Zone 1
Class I, Div. 2
Zone 2
Class II, Div. 1
Zone 20 and Zone 21
Class II, Div. 2
Zone 22
Class III, Div. 1
Zone 20 and Zone 21
Class III, Div. 2
Zone 22
Maximum
Operating
Temperatures
°C
°F
450
840
300
572
280
260
T-Code*
Maximum
Operating
Temperatures
T-Code*
°C
°F
T1
180
356
T3A
T2
165
329
T3B
536
T2A
160
320
T3C
500
T2B
135
275
T4
230
446
T2C
120
248
T4A
215
419
T2D
100
212
T5
200
392
T3
85
185
T6
* Based on 40°C (104°F) ambient
139
1-800-854-0021
www.ldpi-inc.com
HAZARDOUS LOCATION
www.ldpi-inc.com
IP CODE AND RECOMMENDED LEVELS
IP (International Protection) CODE
IP Code is a coding system to indicate the degree of protection by an enclosure against access to hazardous parts, ingress of solid objects, ingress of water, and to
give additional information in connection with such protection.
First Character indicates the degree of protection against the ingress of solid
objects.
Second Character indicates the degree of protection against the ingress of water
with harmful effects.
0
Non-protected
0
Non-protected
1
Protected against solid foreign objects of 50 mm diameter or greater
1
Protected against vertically falling water drops
2
Protected against solid foreign objects of 12.5 mm diameter or greater
2
Protected against vertically falling water drops as the enclosure is tilted 15°
3
3
Protected against spraying water
4
4
Protected against splashing water
5
Dust-protected
5
Protected against water jetting
6
Dust-tight
6
Protected against powerful water jetting
7
Protected against temporary immersion
8
Protected against continuous immersion
UL STANDARDS
ANSI/IES LATERAL LIGHT DISTRIBUTIONS
Number
Title
844
Luminaires for Use in Hazardous (Classified) Location
924
Emergency Lighting and Power Equipment
1598
Luminaires
1598A
Supplemental Requirements for Luminaires
For Installation on Marine Vessels
8750
LED Equipment
Asymmetrical
Long and Narrow
Asymmetrical
Asymmetrical Asymmetrical Symmetrical
Forward Throw
IES RECOMMENDED LIGHTING LEVELS
Task Area
Footcandles
Task Area
Footcandles
Paint Booths
100 - 150
Areas with VDTs
75
Corridors/Stairways/Rest rooms
10 - 20
Classrooms
50 - 75
Storage Rooms
10 - 50
Cafeterias
50
Conference Rooms
20 - 50
Gymnasiums
30 - 50
General Office
50 - 100
Manufacturing Assembly
50 - 500
Drafting/Accounting
100 - 200
Parking Areas (uncovered)
1-2
1-800-854-0021
www.ldpi-inc.com
140
ASK THE EXPERT
www.ldpi-inc.com
GLOSSARY OF LIGHTING TERMS
Have you ever wanted a place to get that specific lighting ques ion answered? Well, look no further!
LDPI, Inc. has all the right technical people in place to answer that Harsh, Hazardous or General lighting question.
To have someone respond to your specific question
email us at: [email protected] or call us toll free at: 1-800-854-0021
Color rendering index (CRI) - a method for describing the effect of a light source on the color appearance of objects being illuminated, with a CRI of 100 representing
the reference condition (and the maximum CRI possible). In general, a lower CRI indicates that some colors may appear unnatural when illuminated by a lamp.
Color temperature - see correlated color temperature.
Constant-wattage autotransformer (CWA) - the most common type of ballast used for HID lamps, it maintains a constant power (wattage) supply to the lamp when
system input voltage fluctuates
Correlated color temperature (CCT) - a description of the color appearance of a light source in terms of warmth or coolness, as measured on the Kelvin scale (K).
As the temperature rises, the color appearance shifts from yellow to blue. Thus, lamps with a low CCT (3000K or less) have a yellow-white color appearance and
are described as “warm”; lamps with a high CCT (4000K and higher) have a blue-white color appearance and are described as “cool”.
Ballast factor (BF) - the ratio of light output of a lamp operated by a given ballast to the light output of the same lamp when operated by a reference ballast. Lamps
operated by a ballast with BF of 0.90 will provide 90 percent of their rated light output (lumens). BFs between 0.85 and 1.0 are the most common.
Disability glare - light that is relatively bright compared to the background, making vision measurably worse. The inability to see clearly as a result of the brightness
of headlights from an oncoming car at night is an example.
Discomfort glare - the type of glare that is uncomfortable and distracting, yet less obvious than disability glare. A bright light source in an individual’s peripheral vision
is an example.
Efficacy - the ratio of light output (lumens) to input power (w tts) expressed in lumens per watt (LPW).
High pressure sodium (HPS) - a high-intensity discharge lamp type that uses sodium under high pressure as the primary light-producing element.
Illuminance - The amount of light that reaches a surface. Illuminance is measured in footcandles (lumens/square foot) or lux (lumens/square meter).
One footcandle equals 10.76 lux, although for convenience the IESNA uses 10 lux as the equivalent.
Instant-start - a method of starting fluorescent lamps. The voltage, which is applied across the electrodes to strike the electric arc, is up to twice as high as it is with
other starting methods. The higher voltage is necessary because the electrodes are not heated prior to starting.
Lamp life - the median life span of a very large number of lamps. Half of the lamps in a sample are likely to fail before the rated lamp life, and half are likely to survive
beyond the rated lamp life.
Lamp lumen depreciation (LLD) - the reduction in lamp light output that progressively occurs during lamp life.
Lumen (lm) - a unit of measurement of the rate at which a lamp produces light. A lamp’s light output rating expresses the total amount of light emitted in all directions
per unit time. Ratings of initial light output provided by manufacturers express the total light output after 100 hours of operation.
Luminance - the photometric quantity most closely associated with the perception of brightness, measured in units of luminous intensity (candelas) per unit area
(feet squared or meters squared).
Luminaire efficiency - the ratio of the light emitted by luminaire to the light emitted by the lamp or lamps within it. Components of a luminaire, such as reflectors and
diffusers, absorb some of the light from the lamps(s). A highly efficient luminaire emits most of the light that the la p(s) emits.
Metal halide (MH) - a high-intensity discharge lamp type that uses mercury and several halide additives as light-producing elements.
Open-circuit voltage - the voltage applied across the output terminals of a ballast when no load is connected. This is the voltage applied across a lamp circuit to start a
lamp. After starting, the voltage rapidly decreases and stabilizes at the operating voltage.
Preheat - a method of starting fluorescent lamps in which the electrodes are heated before a switch opens to allow a starting voltage to be applied across the lamp.
With preheat starting, the lamp flashes on and o f for a few seconds before staying lit.
Power factor - a measure of how effectively a ballast converts current and voltage into usable power to operate the lamps. A power factor of 0.9 or greater indicates
a high power-factor ballast.
Prismatic lens - an optical component of a luminaire that is used to distribute the emitted light. It is usually a sheet of plastic with a pattern of pyramid-shaped
refracting prisms on one side. Most ceiling mounted luminaries in commercial buildings use prismatic lenses.
Rapid-start - a method of starting fluorescent lamps in which t e ballast supplies voltage to heat the lamp electrodes for one to two seconds prior to starting and,
in most cases, during lamp operation. A rapid-start system starts smoothly, without flashing
Reflected glare - often called veiling reflections, glare that sults from light shining off polished or glossy surfaces.
Restrike time - the time required for a lamp to restrike, or start, after the lamp is extinguished. Normally, HID lamps need to cool before they can be restarted.
Visual comfort probability (VCP) - a system for estimating discomfort glare that predicts the percentage of people who are likely to find the lighting comfortable, against
the percentage that find it uncomfortable
141
1-800-854-0021
www.ldpi-inc.com
LDPI INC.
LDPI,
www.ldpi-inc.com
GENERAL TERMS AND CONDITIONS OF SALE
LDPI, Inc. T-n-C Overview
ORDERS:
$200.00 minimum order required. All items must be ordered by their catalog number. Please specify voltage, wattage and any options sought.
CREDIT POLICIES:
All requests for an open account (Net 30) are subject to credit approval. Customers must complete a credit application and allow at least one week for processing.
To expedite your initial order, please send payment for full amount and include shipping and handling charges.
TERMS:
Our standard terms: Net 30 days with prior approved credit.
All accounts unpaid at maturity will be charged interest at a rate of 18% PER ANNUM. Subsequent orders will be shipped C.O.D. or prepay only.
DELIVERY:
Standard shipping time is two weeks unless special arrangements are made prior to time of order.
FREIGHT:
All shipments are F.O.B. LDPI's factory, located in Eau Claire, WI. We reserve the right to select the carrier on all shipments unless special arrangements are made at
time of order. In addition to the purchase price the customer will be charged shipping and handling charges set forth on the invoice.
CLAIMS:
All LDPI® merchandise is inspected prior to shipping. Our liability ceases upon acceptance of merchandise by the carrier. DO NOT DEDUCT for damaged merchandise
when paying invoices, as carrier reimburses the consignee. Therefore, all claims must therefore be filed with the carrier t the time of receipt and noted on the Bill
of Lading. We cannot accept freight claims if the Bill of Lading does not contain a notation of the existence of damage. We will assist in collecting your claim, but the
liability for payment of the claim remains with the carrier.
RETURNS:
Authorization must be obtained from LDPI prior to returning merchandise to us. A request for authorization to return material must be made within 60 days from the date
of shipment. We will issue a RETURN MATERIAL AUTHORIZATION (RMA) NUMBER. Merchandise must be returned, freight prepaid, and in original factory cartons. A
minimum restocking charge of 20% applies on returns. Only standard catalogued merchandise may be returned. Custom made and modified versions of our standard
product are not subject to return. A minimum 50% restocking charge will apply, if standard merchandise is returned without a proper RMA.
PRICING:
We make every effort to provide pricing information to you in a timely manner. However, prices and terms are subject to change without notice.
This Overview is not a substitute for the detailed Terms and Conditions.
If there is a difference between this Overview and the detailed Terms and Conditions, the Terms and Conditions govern the relationship.
See our website: http://ldpi-inc.com/legal/index.htm for our current Terms and Conditions.
1-800-854-0021
www.ldpi-inc.com
142
LDPI INC.
LDPI,
www.ldpi-inc.com
1. EXCLUSIVITY OF TERMS: These terms and conditions, together with any terms and conditions contained either on the front side of this document or any other
purchase documents issued by us constitute the entire agreement of LDPI, Inc. (“Seller”) and the Buyer named on the front side (“Buyer”), and supersede all previous
correspondence between Buyer and Seller, both written and oral, including any purchase orders that may have been submitted by the Buyer. Any term specified on the
front side of this document supersedes any term on this side of the Agreement. This writing is not an acceptance of any offer made by Buyer and specifically rejects any
additional or conflicting terms in Buyers acceptance documents which are deemed a material alteration and therefore rejected. Requests for change orders telephoned,
mailed, emailed or faxed to Seller shall be considered written and approved by Buyer if Seller agrees to such change and commences engineering or production changes.
These changes shall be binding even if Seller has not yet quoted an amount for the change. If quoted, the quoted amount shall be deemed accepted by Buyer. If not
yet quoted, Seller shall be entitled to an equitable adjustment to price and delivery terms, not less than its standard shop rates and burden rates applicable to the Buyer
in the base agreement.
2. PURCHASE PRICE: The purchase price is exclusive of any sales, use, excise, value added tax, custom or duty or any other fee imposed on or measured on the
transaction regardless of type (“taxes”). Any taxes shall be paid by the Buyer. In the event that Seller shall be required to collect or pay any taxes, Buyer shall reimburse
Seller for such taxes. Seller may invoice Buyer for any taxes, and add such amount to the purchase price unless a valid exemption certificate is provided by the Buyer.
The purchase price shall be adjusted for change orders.
3. TERMS OF PAYMENT: Unless otherwise specified by the Seller, all prices are 30 days, net cash, subject to Seller’s approval of Buyer’s credit. If any payment is not
made when due, Seller may impose interest on the unpaid balance of the purchase price (including change orders, taxes, freight and handling) at the rate of 18% PER
ANNUM, unless such rate is prohibited by law, in which case, the highest rate permitted by law shall apply. Additionally, Buyer shall pay all costs of collection incurred by
Seller, including reasonable attorneys’ fees. If Buyer fails to pay any sum when due under this Agreement, Seller may declare all payments owing under this Agreement
and any other agreement with Buyer, to be immediately due and payable and may refuse to perform any obligations then remaining unperformed under this Agreement
or any agreement with Buyer.
4. DELIVERY: Any term of delivery specified is tied to the date Seller receives Buyer’s signed copy of this Agreement, and is only an estimate. Seller does not guarantee
the delivery date, but will make a good faith effort to do so. Seller may make partial shipments and submit a separate invoice for each shipment. Unless otherwise
specified, all shipments will be F.O.B. Seller’s plant, Eau Claire, Wisconsin unless otherwise specified, delivery for shipment to Buyer of designs, shop drawings, equipment or materials to a carrier at Seller’s plant in Eau Claire, Wisconsin, shall constitute delivery by Seller to Buyer. All orders are shipped at Buyer’s risk and Seller
shall incur no liability for any order damaged, broken or lost in transit. Seller shall not be liable for any failure to design, manufacture or deliver, or for any delay in the
design, manufacture or delivery of, any order sold or to be sold by it if such a failure or delay or inability to obtain transportation, inability to obtain materials, shortage
of fuel, failure of sources of suppliers, labor disputes, accident, riot, war, terrorist act, embargo, restraint or demand of the United States or of any other government,
non-fulfillment by Buyer of conditions of payment, natural disaster, or any other cause beyond the control of Seller. If at any time Seller shall be prevented by any of the
above causes from supplying all or any part of Buyer’s order and to its other customers under contract, Seller shall have the right to prorate the quantity then deliverable
to Buyer and to its other customers.
5. ACCEPTANCE: Buyer shall be deemed to have accepted an order no later than 30 days following receipt unless it has previously notified Seller of any claim. All
claims for damage in transit shall by submitted directly to the carrier and noted on the Bill of Lading prior to acceptance of the goods. If there is no notation made on the
Bill of Lading, Seller cannot process a freight claim against the carrier. Therefore Buyer shall be deemed liable for any freight damage if the goods are accepted without
notation of damage on the Bill of Lading.
6. SECURITY INTEREST: Buyer grants Seller a purchase money security interest in all unpaid goods (which shall serve as the collateral for this security agreement) and
these goods shall remain personal property until the unpaid purchase price, and any costs, are paid in full. This purchase money security interest shall apply wherever
these goods are located. By signing any quote, purchase order, request for purchase or quotation, order confi mation or contract, Buyer shall be deemed to have provided
an authenticated signature under the Uniform Commercial Code (UCC) and these terms shall be deemed incorporated by reference into all such writings. Buyer shall
allow Seller to file any financing statement evidencing this security interest and these terms shall be deemed by the parties to constitute a security agreement under
the UCC. Until paid in full, Buyer shall not encumber, allow any lien to attach or convey the goods. Buyer shall be responsible for maintaining insurance on all unpaid
goods for the invoice amount. In the event that the goods are not paid under the terms of Seller’s invoice such nonpayment shall act as a default and allow Seller the
right to exercise its security interest in the collateral. In the event that the goods are affixed to real property Buyer acknowledges that Seller may file a mechanics lien
against the property to which the goods are affixed.
7. INSTALLATION: This Agreement is limited solely to the transaction described on the front side, and Seller has no obligation to install the order. Buyer assumes all
liability for installation of the order and shall be responsible for ensuring that the installation complies with federal, state and local health and safety laws and regulations.
Buyer indemnifies, holds harmless, and agrees to defend Seller from any and all claims, damages, liabilities and expenses resulting from negligent installation of the
order, installation that does not comply with such laws and regulations, or violation of any such law or regulation.
8. LIMITED WARRANTY: The Seller warrants to the Buyer that any order designed, manufactured and sold by the Seller, if properly installed, in an unmodified condition,
in accordance with the installation instructions, operated, and maintained, and used under normal conditions, shall be free from defects in workmanship and materials
for a period of one (1) year from the date the order is shipped from the facilities of the Seller. This warranty does not apply to orders manufactured by third parties or
for any work or modifications performed by third parties. The obligations of the Seller, and the Buyer’s SOLE AND EXCLUSIVE REMEDY, shall be limited to one of the
following, at the Seller’s option: (a) the repair or replacement of defective parts, provided, however, the Buyer shall be responsible for the payment of all labor costs
associated with any such repair or replacement; or (b) in the event the Seller is unable to repair or replace the defective parts, the Buyer shall be entitled to a refund of
the costs of the parts. The Seller shall have no obligation under this Limited Warranty for ordinary wear and tear, damage, improper installation or modification, improper
or inadequate maintenance or inspection or if the order as used or installed does not comply with local, state, and federal laws or regulations. The Seller makes no warranty of any kind whatsoever with respect to parts which are manufactured or supplied by other persons or organizations (i.e. an OEM); provided, however, the Seller
shall reasonably assist the Buyer in connection with warranties, if any, provided by an OEM.
143
1-800-854-0021
www.ldpi-inc.com
LDPI INC.
LDPI,
www.ldpi-inc.com
9. WARRANTY PERFORMANCE PROCEDURE: All parts returned for repair, replacement, or refund (which refund may be in the form of a credit to the buyer's account),
are subject to a minimum 20% restocking fee. A 50% restocking fee will apply if material is not accompanied with proper Return Materials Authorization (RMA) numbers.
Request for authorization to return material must be made within 60 days from the date of shipment.
10. DISCLAIMERS OF WARRANTIES: THE WARRANTIES CONTAINED HEREIN ARE EXPRESSLY IN LIEU OF ANY OTHER EXPRESSED OR IMPLIED
WARRANTIES, OR ANY OTHER OBLIGATION ON THE PART OF THE SELLER, INCLUDING WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. Any models, drawings, plans, specifications, affirmations of fact, promises or other
communication by the Seller with reference to the order or the performance of the order are solely for the convenience of the Buyer and shall not in any way modify
the expressed warranties and disclaimers set forth. No agents or other parties are authorized to make any warranties on behalf of the Company or to assume for the Company
any other liability or obligation in connection with the order.
11. CONSEQUENTIAL DAMAGES: The Seller shall not be liable for any incidental or consequential damages arising from the order, the breach of any warranties, the failure
to deliver, delay in delivery, delay on nonconforming condition, or for any other breach of contract or duty between Seller and Buyer. In no event shall the Seller’s total liability
for any or all breaches of any warranty, exceed the actual purchase price paid by the Buyer for the equipment.
12. LIMITATIONS OF ACTIONS: Any action against the Seller must be commenced within one (1) year after the cause of action accrues.
13. MANUFACTURING DESIGNS AND PROPRIETARY PROPERTY: All copyrights, trademarks, plans, drawings, product designs, specifica ions, parts manuals, installation
instructions, trade dress, and product ergonomics are the proprietary property of Seller (“Intellectual Property”). Buyer acknowledges Sellers investment in its Intellectual
Property. Buyer represents and warrants that it is purchasing Seller’s product(s) in order to obtain Seller’s product(s) for its use, or resale for use, and will, either directly
or through any third party, (i) respect Seller’s Intellectual Property as being the property of Seller, and (ii) not reverse engineer, pirate, copy, replicate in any other manner
Seller’s product(s) or in any other way assist any other person in so doing.
14. CANCELLATIONS: Order cancellations will be subject to all expenses incurred by Seller including engineering costs, special parts purchased and production time. These
expenses are the responsibility of the Buyer. If an order is cancelled after shipment is made or delivery is refused at destination, all costs for any and all further actions such
as storage, rerouting or return shipment will be the responsibility of the Buyer. Any purchase order already in the manufacturing process will have a minimum of 25% value
of order assessed to the Buyer or in any circumstance an amount established by Seller. No cancellation of a "Plans and Specifications
Special Order / Non-Catalog Item" will be allowed once acknowledged.
15. PLANS AND SPECIFICATIONS: Seller does not assume responsibility for orders shipped in accordance with the information supplied on or with Buyer orders in regards
to Buyer approved drawings, non-standard fixture modification, lighting layout or custom designed application of product. Acceptance of any custom production item requires
customer written authorization and signature.
16. BACKCHARGES: Seller will not approve or accept returns or back charges for labor, materials, or other costs incurred in modification, adjustment, service or repair of
an order unless previously approved by Seller in writing.
17. CHANGES IN DESIGN: Seller reserves the right to modify the design and construction of the order to incorporate improvements or to substitute material equal or
superior to that originally specified
18. MISCELLANEOUS: All terms used herein, which are defined or given meaning in the Uniform Commercial Code, as adopted in the State of Wisconsin, and this Agreement, shall be governed by the laws of Wisconsin.
Form D-1046 Rev. 14APR11 © 2011, LDPI®, Inc.
We use our best effort to make our catalog accurate. We reserve the right to correct typographical
errors and omissions. Specifications may be changed subsequent o printing.
1-800-854-0021
www.ldpi-inc.com
144
LDPI INC.
LDPI,
www.ldpi-inc.com
L E D 5 Y E A R WA R R A N T Y
LDPI, Inc. LED Fixture 5 Year Limited Warranty
Subject to the exclusions set forth below, LDPI, Inc. (“Seller”) warrants to the Buyer that any order for LED fixtures designed, manufactured and sold by the Seller ( the
"Product") shall be free from defect in material and workmanship for a period of (5) years from the date of shipment from LDPI’s facility, provided the Product(s) is: (1)
properly installed, in an unmodified condition, in accordance with the installation instructions by a qualified electrician and (2) operated, maintained, and used under
normal conditions with its commercial light emitting diode (LED) fixture s electrical components installed with the fixture. THIS LIMITED WARRANTY IS VOID IF THE
PRODUCT(S) IS NOT USED FOR THE PURPOSE FOR WHICH IT IS DESIGNED. The determination of whether the Product is defective shall be made by the Seller
in its sole discretion with consideration given to the overall performance of the Product. The Light Emitting Diode (LED) arrays in the Product(s) will be considered
defective in material or workmanship if a total of 15% or more of the individual LED’s in the Product(s) fail to illuminate, per each board. Non-Electrical components are
warranted for a period of one year only from date of shipment, as more fully outlined in the LDPI, Inc. General Terms and Conditions.
LDPI, Inc. will not be responsible under this warranty for any failure of the Product(s) caused by: acts of nature; physical damage; alterations; environmental conditions;
vandalism; mishandling; improper installation; storage; improper maintenance; fire; power surges or failure; electrical current fluctuations; animal or insect activity;
improper controlling and/or excessive switching; induced vibration; failure to follow installation instructions; improper power supply; use of LED lamps or boards not
supplied by Seller; improper or unauthorized use; exposure to adverse or hazardous chemical and/or reactive cleaning agents; fault or negligence of Buyer, any end
user or third party; or any other occurrences beyond control of LDPI, Inc. If the Product(s) are used on existing foundations, anchorages or structures, the end user is
solely responsible for the structural integrity of such existing foundations, anchorages, or structures
The obligation of the Seller for claims based on the failure of the Product(s) to meet any warranty, whether the claims is in contract, warranty, tort or otherwise, and the
Buyer’s SOLE and EXCLUSIVE REMEDY, shall be limited to one of the following, at the Seller’s option: (a) the repair or replacement of the defective parts, provided,
however, the Buyer shall be responsible for the payment of labor costs associated with such repair or replacement, including field labor and service charges related to
the repair or replacement of the Product(s); or (b) in the event the Seller is unable to repair or replace the defective parts, the Buyer shall be entitled to a refund of the
costs of the parts.
Buyer assumes all responsibility for installation of the Product(s) and shall be responsible for ensuring that the installation complies with federal, state and local health
and safety laws and regulations. Buyer indemnifies, holds harmless, and agrees to defend Seller from any and all claims, damages, liabilities and expenses, including
actual reasonable attorney's fees, resulting from negligent installation of the Product(s), any installation that does not comply with the applicable laws and regulations,
or violation of any such law or regulation, codes, recommendations, product specification sheets, or instructions of Selle .
This warranty extends only to the Products(s) as delivered to, and is for the sole and exclusive benefit of, the original end user of the Product(s) at the original location. Warranty claims regarding Product(s) must be submitted to Seller in writing within (30) days of the discovery of the defect or failure. Buyer must provide proof of
purchase such as the invoice and comply with Seller’s other warranty requirements. Seller may require Buyer to promptly return the Product(s) to Seller for inspection
and verification of non-conformance by LDPI, Inc., but no Product(s) or component part(s) will be accepted for inspection, verification or return unless accompanied
by a Return Materials Authorization (RMA) number.
Warranty claims must be sent freight prepaid to:
LDPI, Inc.
4404 Anderson Drive
Eau Claire, WI 54703
IN NO EVENT SHALL THE SELLER BE LIABLE FOR INCIDENTAL, COMPENSATORY, CONSEQUENTIAL, INDIRECT, AND SPECIAL OR OTHER DAMAGES. Seller’s
aggregate liability with respect to a defective Product shall in any event be limited to the monies paid to seller for that defective Product(s).
THIS WARRANTY IS THE ONLY WARRANTY APPLICABLE TO THE PRODUCT(S) AND IS IN LIEU OF ANY OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
LDPI, Inc. reserves the right to modify or discontinue this LED Fixture Limited Warranty without notice.
All sales of Product(s) are subject to LDPI, Inc. General Terms and Conditions.
See our website: http://www.ldpi-inc.com/terms-and-conditions for our current Terms and Conditions.
Form D-1214 Rev. 05NOV13 © 2013, LDPI®, Inc.
145
1-800-854-0021
www.ldpi-inc.com

2015 Spec Catalog

Transcription

Similar documents

paint booth lighting

GERTIFICATE M

Sunleaves Micro-Sun

SPYDR 1200 Product Specifications

zurn yacht

Murray Feiss OL7411ASTB

Electronic Metal Halide Ballasts for 39 Watt Lamps

Cera Arc BT 220-230-270W

High Bay Lighting Solutions - Universal Lighting Technologies