Capteur température et humidité pour HVAC

Capteur température et humidité pour HVAC
oct-13
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Type R 590
Type R 591
Cable Pvc / Pvc
Cable Silicone / Silicone
Sonde de température
Pt100, Pt1000, Ni1000, KTY, NTC, autres sur demande
Classe B ou A
En système 2 fils
En système 3 fils
ca. 1 mA
à 20°C et 500V DC, typ. 100 MOhm
6 x 6 x 29 mm
Avec embouts isolés
A définir
3 x 0,14 mm² PVC / PVC
-30...+ 105°C
-50...+ 180°C
IP 54
Capot Synthétique Auto Adhésif de 16 x 45 mm
-30...+50°C
-30...+105°C
Raccordement électrique
Courant de mesure
Résistance d'isolation
Dimensions
Terminaison des câbles
Longueur Câble
Câble de liaison
Gamme de T° si câble PVC
Gamme de T° si câble Silicone
Classe de protection
Montage
Température de stockage
Température d'utilisation
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Type R 598-PVC
Type R 598-SIL
Cable Pvc / Pvc
Cable Silicone / Silicone
Sonde de température
Raccordement électrique
Courant de mesure
Résistance d'isolation
Dimensions
Terminaison des câbles
Longueur Câble
Câble de liaison
Gamme de T° si câble PVC
Gamme de T° si câble Silicone
Classe de protection
Montage
Température de stockage
Température d'utilisation
Pt100, Pt1000, Ni1000, KTY, NTC, autres sur demande
Classe B ou A
En système 2 fils
En système 3 fils
ca. 1 mA
à 20°C et 500V DC, typ. 100 MOhm
Bloc Alu de Ø 15 x 20 mm
Avec embouts isolés
A définir
3 x 0,14 mm² PVC / PVC
-30...+ 105°C
-50...+ 180°C
IP 54
Avec collier inox
-30...+50°C
-30...+105°C
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Type R 599-SIL
Cable Silicone / Silicone
Sonde de température
Raccordement électrique
Courant de mesure
Résistance d'isolation
Dimensions
Terminaison des câbles
Longueur Câble
Câble de liaison
Gamme de T° si câble Silicone
Classe de protection
Montage
Température de stockage
Température d'utilisation
Pt100, Pt1000, Ni1000, KTY, NTC, autres sur demande
Classe B ou A
En système 2 fils
En système 3 fils
ca. 1 mA
à 20°C et 500V DC, typ. 100 MOhm
40 x 25 x 25 mm
Avec embouts isolés
A définir
2 x 0,22 mm² SIL / SIL
-50...+ 180°C
IP 65
Magnétique
-30...+50°C
-50...+180°C
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Accessoire
Longueur
nominale
M 20 x 1,5
SONDE THERMOMETRIQUE SANS PROTECTION
Type R 606
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Outdoor Temperature Transformer
Type
Supply voltage for 0-10V:
24V AC/DC
Analogue output 0-10V:
3-wire connection, min. load resistance 100kOhm
Supply voltage for 4...20mA:
10...30V DC, depends on liability (Ubmin = 10V + Rload*0,02A)
Analogue output 4...20mA:
2-wire connection, max. Rload(Ohm) = (+Ub-10V)/0,02A
Accuracy:
± 0,2K + max. 3% eigenvalue
Measurement range:
16 measuring ranges per DIP switch selectable
Measurement range options:
-50...+50°C, -50...+150°C, -30...+70°C, -20...+50°C, -20...+80°C,
R 618
4-20...+120°C, -20...+150°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C (other on request)
Working temperature electronic:
-30...+70°C
Working range r.H.:
0...98%r.H., without condensation
Sensor:
Pt100 DIN EN 60751, Class B
Electrical connection:
screw terminals max. 1,5mm²
Cable gland:
high-strength cable gland M16 with strain relief
Mounting:
mounting flange (in scope of delivery)
Housing:
polyamide (synthetic)
Colour:
white (like RAL 9010)
Protection type:
IP65
Dimension:
L 64 x W 58 x H 34,5mm
Protective sleeve:
Ø 6mm VA stainless steel 1.4571
Standards:
CE-certificated, EMC according to EN 61326-1 2006, EMV directive 89/336/EWG
Storing temperature:
-20...+50°C
Display:
optional LCD-Display, to display the actual-temperature
Output T°
Type
R 618.1
4 - 20 mA
R 618.2
0 - 10 Vdc
R 618.3
4 - 20 mA
With Display
R 618.4
0 - 10 Vdc
With Display
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Outdoor Temperature Transformer
Type
Supply voltage for 0-10V:
24V AC/DC
Analogue output 0-10V:
3-wire connection, min. load resistance 100kOhm
Supply voltage for 4...20mA:
10...30V DC, depends on liability (Ubmin = 10V + Rload*0,02A)
Analogue output 4...20mA:
2-wire connection, max. Rload(Ohm) = (+Ub-10V)/0,02A
Accuracy:
± 0,2K + max. 3% eigenvalue
Measurement range:
16 measuring ranges per DIP switch selectable
Measurement range options:
-50...+50°C, -50...+150°C, -30...+70°C, -20...+50°C, -20...+80°C,
R 618A.1.Lenght
4 - 20 mA
R 618A.2.Lenght
0 - 10 Vdc
R 618A.3.Lenght
4 - 20 mA
With Display
R 618A.4.Lenght
0 - 10 Vdc
With Display
4-20...+120°C, -20...+150°C, 0...+50°C, 0...+100°C, 0...+150°C, 0...+200°C (other on request)
Working temperature electronic:
-30...+70°C
Working range r.H.:
0...98%r.H., without condensation
Sensor:
Pt100 DIN EN 60751, Class B
Electrical connection:
screw terminals max. 1,5mm²
Cable gland:
high-strength cable gland M16 with strain relief
Mounting:
mounting flange (in scope of delivery)
Housing:
polyamide (synthetic)
Colour:
white (like RAL 9010)
Protection type:
IP65
Dimension:
L 64 x W 58 x H 34,5mm
Protective sleeve:
Ø 6mm VA stainless steel 1.4571
Standards:
CE-certificated, EMC according to EN 61326-1 2006, EMV directive 89/336/EWG
Storing temperature:
-20...+50°C
Display:
optional LCD-Display, to display the actual-temperature
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Output r.H.
Type H.606.1
4 - 20 mA
Type H.606.2
0 - 10 Vdc
Type H.606.3
4 - 20 mA
With Display
Type H.606.4
0 - 10 Vdc
With Display
The measurement of the relative humidity and temperature becomes more and more
important in the industrial process of measuring and controlling.
This device detects the relative humidity and temperature of the environment air by a capacitive sensor,
which is protected by a screwable sintered filter (for cleaning).
The measured value will be changed into a standardized output signal for further processing.
Each device of this series passes through a 2-days test run.
Technical Specifications:
Measurement range relative humidity:
Measurement inaccuracy relative humidity:
Linearity:
Output relative humidity:
Output relative humidity:
Temperature dependence at 55% r.H.:
Temperature dependence at 55% r.H.:
Temperature:
Measurement range temperature:
Measurement inaccuracy temperature:
Output temperature:
Output temperature:
Temperature dependence at 20°C:
Temperature dependence at 20°C:
General Data:
Supply voltage 4...20mA:
Supply voltage 0-10V:
Power consumption:
Power consumption:
Electrical connection:
Housing / colour:
Protection class:
Electromagnetic compatibility:
Ambient temperature:
Operating range relative humidity:
Flow rate:
Storage temperature:
Sensor protection:
Display:
Test run:
Relative humidity:
0...100% r.H.
< 3% r.H. (in range of 30%...70% r.H. at 20°C, other operating range <5% r.H. at 20°C)
± 1% / year
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load current <500 Ohm)
< 0,02% r.F. / °C (voltage version)
< 0,04% r.F. / °C (current version)
0…+50°C
-20…+80°C
-30…+70°C
0…+100°C
< 0,3K (in range of 10...40°C, other operating range < 0,5K)
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load resistance <500 Ohm)
< 0,05°C / 10K (voltage version)
< 0,07°C / 10K (current version)
15...36V DC
Type H.606.1
24V AC/DC (± 10%)
Type H.606.2
Typ. 10mA (voltage version)
Max. 20mA (current version)
Screw terminal, cable diameter max. 1,5mm
Synthetic / white
IP65 (electronic assembly), version with display IP30
EN 61326-1997 +A1-1998 +A2-2001 (CE) fulfiled low voltage directive according to DIN EN 61010 part 1
-20...+ 50°C
0...99% r.H.
< 2m/s
0...+50°C
Ets FABRITIUS S.P.R.L.
Sintered filter
Avenue Van Volxem 180 - 1190 BRUXELLES
LCD-Display
Type H.606.3 / 4
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
At least 48h test run before delivery
E-mail: [email protected]
Ø 16 x 190 mm
Technical Specifications:
Measurement range relative humidity:
Measurement inaccuracy relative humidity:
Linearity:
Output relative humidity:
Output relative humidity:
Temperature dependence at 55% r.H.:
Temperature dependence at 55% r.H.:
Temperature:
Measurement range temperature:
Measurement inaccuracy temperature:
Output temperature:
Output temperature:
Temperature dependence at 20°C:
Temperature dependence at 20°C:
General Data:
Supply voltage 4...20mA:
Supply voltage 0-10V:
Power consumption:
Power consumption:
Electrical connection:
Housing / colour:
Protection class:
Electromagnetic compatibility:
Ambient temperature:
Operating range relative humidity:
Flow rate:
Storage temperature:
Sensor protection:
Display:
Test run:
Outdoor Humidity-/Temperature Transformer
Output r.H.
Type H.606.5.Length
4 - 20 mA
Type H.606.6.Length
0 - 10 Vdc
Type H.606.7.Length
4 - 20 mA
With Display
Type H.606.8.Length
0 - 10 Vdc
With Display
The measurement of the relative humidity and temperature becomes more and more
important in the industrial process of measuring and controlling.
This device detects the relative humidity and temperature of the environment air by a capacitive sensor,
which is protected by a screwable sintered filter (for cleaning).
The measured value will be changed into a standardized output signal for further processing.
Each device of this series passes through a 2-days test run.
Relative humidity:
0...100% r.H.
< 3% r.H. (in range of 30%...70% r.H. at 20°C, other operating range <5% r.H. at 20°C)
± 1% / year
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load current <500 Ohm)
< 0,02% r.F. / °C (voltage version)
< 0,04% r.F. / °C (current version)
0…+50°C
-20…+80°C
-30…+70°C
0…+100°C
< 0,3K (in range of 10...40°C, other operating range < 0,5K)
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load resistance <500 Ohm)
< 0,05°C / 10K (voltage version)
< 0,07°C / 10K (current version)
15...36V DC
Type H.606.5
24V AC/DC (± 10%)
Type H.606.6
Typ. 10mA (voltage version)
Max. 20mA (current version)
Screw terminal, cable diameter max. 1,5mm
Synthetic / white
IP65 (electronic assembly), version with display IP30
EN 61326-1997 +A1-1998 +A2-2001 (CE) fulfiled low voltage directive according to DIN EN 61010 part 1
-20...+ 50°C
0...99% r.H.
< 2m/s
0...+50°C
Ets FABRITIUS S.P.R.L.
Sintered filter
Avenue Van Volxem 180 - 1190 BRUXELLES
LCD-Display
Type H.606.7 / 8
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
At least 48h test run before delivery
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Output r.H.
Type H.619.1H
4 - 20 mA
Type H.619.2H
0 - 10 Vdc
Type H.619.3H
4 - 20 mA
With Display
The shown value in the display is alternating all 5 Sec
Type H.619.4H
0 - 10 Vdc
With Display
(T° value / Humidity value)
The measurement of the relative humidity and temperature becomes more and more
important in the industrial process of measuring and controlling.
This device detects the relative humidity and temperature of the environment air by a capacitive sensor,
which is protected by a screwable sintered filter (for cleaning).
The measured value will be changed into a standardized output signal for further processing.
Each device of this series passes through a 2-days test run.
Technical Specifications:
Relative humidity:
Measurement range relative humidity:
Measurement inaccuracy relative humidity:
Linearity:
Output relative humidity:
Output relative humidity:
Temperature dependence at 55% r.H.:
Temperature dependence at 55% r.H.:
Temperature:
Measurement range temperature:
Measurement inaccuracy temperature:
Output temperature:
Output temperature:
Temperature dependence at 20°C:
Temperature dependence at 20°C:
General Data:
Supply voltage 4...20mA:
Supply voltage 0-10V:
Power consumption:
Power consumption:
Electrical connection:
Housing / colour:
Protection class:
Electromagnetic compatibility:
Ambient temperature:
Operating range relative humidity:
Flow rate:
Storage temperature:
Sensor protection:
Display:
Test run:
0...100% r.H.
+/- 2% r.H. (in range of 30%...70% r.H, else +/- 3% at 20°C
± 1% / year
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load current <500 Ohm)
< 0,02% r.F. / °C (voltage version)
< 0,04% r.F. / °C (current version)
-30...+70°C / -20…+80°C / 0 … +50°C / 0 … +100°C
< 0,3K (in range of 10...40°C, other operating range < 0,5K)
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load resistance <500 Ohm)
< 0,05°C / 10K (voltage version)
< 0,07°C / 10K (current version)
15...36V DC
Type H.619.1H
24V AC/DC (± 10%)
Type H.619.2H
Typ. 10mA (voltage version)
Max. 40mA (current version)
Screw terminal, cable diameter max. 1,5mm
Synthetic / white
IP65 (electronic assembly), version with display IP30
EN 61326-1997 +A1-1998 +A2-2001 (CE) fulfiled low voltage directive according to DIN EN 61010 part 1
-20...+80°C
0...99% r.H.
< 2m/s
0...+50°C
Ets FABRITIUS S.P.R.L.
Sintered filter
Avenue Van Volxem 180 - 1190 BRUXELLES
LCD-Display
Type H.619.3H / H.619.4H
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
At least 48h test run before delivery
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Measurement inaccuracy relative humidity:
Type H.619.1H.LENGHT
Type H.619.2H.LENGHT
Type H.619.3H.LENGHT
Type H.619.4H.LENGHT
4 - 20 mA
0 - 10 Vdc
4 - 20 mA
0 - 10 Vdc
With Display
With Display
+/- 2% r.H. (in range of 30%...70% r.H, else +/- 3% at 20°C
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Output r.H.
Type H.618.1H
4 - 20 mA
Type H.618.2H
0 - 10 Vdc
Type H.618.3H
4 - 20 mA
With Display
The shown value in the display is alternating all 5 Sec
Type H.618.4H
0 - 10 Vdc
With Display
(T° value / Humidity value)
The measurement of the relative humidity and temperature becomes more and more
important in the industrial process of measuring and controlling.
This device detects the relative humidity and temperature of the environment air by a capacitive sensor,
which is protected by a screwable sintered filter (for cleaning).
The measured value will be changed into a standardized output signal for further processing.
Each device of this series passes through a 2-days test run.
Technical Specifications:
Relative humidity:
Measurement range relative humidity:
Measurement inaccuracy relative humidity:
Linearity:
Output relative humidity:
Output relative humidity:
Temperature dependence at 55% r.H.:
Temperature dependence at 55% r.H.:
Temperature:
Measurement range temperature:
Measurement inaccuracy temperature:
Output temperature:
Output temperature:
Temperature dependence at 20°C:
Temperature dependence at 20°C:
General Data:
Supply voltage 4...20mA:
Supply voltage 0-10V:
Power consumption:
Power consumption:
Electrical connection:
Housing / colour:
Protection class:
Electromagnetic compatibility:
Ambient temperature:
Operating range relative humidity:
Flow rate:
Storage temperature:
Sensor protection:
Display:
Test run:
0...100% r.H.
+/- 2% r.H. (in range of 30%...70% r.H, else +/- 3% at 20°C
± 1% / year
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load current <500 Ohm)
< 0,02% r.F. / °C (voltage version)
< 0,04% r.F. / °C (current version)
-30...+70°C / -20…+80°C / 0 … +50°C / 0 … +100°C
< 0,3K (in range of 10...40°C, other operating range < 0,5K)
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load resistance <500 Ohm)
< 0,05°C / 10K (voltage version)
< 0,07°C / 10K (current version)
15...36V DC
Type H.618.1H
24V AC/DC (± 10%)
Type H.618.2H
Typ. 10mA (voltage version)
Max. 40mA (current version)
Screw terminal, cable diameter max. 1,5mm
Synthetic / white
IP65 (electronic assembly), version with display IP30
EN 61326-1997 +A1-1998 +A2-2001 (CE) fulfiled low voltage directive according to DIN EN 61010 part 1
-20...+80°C
0...99% r.H.
< 2m/s
0...+50°C
Ets FABRITIUS S.P.R.L.
Sintered filter
Avenue Van Volxem 180 - 1190 BRUXELLES
LCD-Display
Type H.618.3H / H.618.4H
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
At least 48h test run before delivery
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Measurement inaccuracy relative humidity:
Type H.618.1H
Type H.618.2H
Type H.618.3H
Type H.618.4H
4 - 20 mA
0 - 10 Vdc
4 - 20 mA
0 - 10 Vdc
With Display
With Display
+/- 2% r.H. (in range of 30%...70% r.H, else +/- 3% at 20°C
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
With Calibration certificate 3 point Humidity and 1 point Temperature
Ets FABRITIUS S.P.R.L.
Avenue Van Volxem 180 - 1190 BRUXELLES
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
E-mail: [email protected]
Outdoor Humidity-/Temperature Transformer
Output r.H.
Type H.618.1
4 - 20 mA
Type H.618.2
0 - 10 Vdc
Type H.618.3
4 - 20 mA
With Display
The shown value in the display is alternating all 5 Sec
Type H.618.4
0 - 10 Vdc
With Display
(T° value / Humidity value)
The measurement of the relative humidity and temperature becomes more and more
important in the industrial process of measuring and controlling.
This device detects the relative humidity and temperature of the environment air by a capacitive sensor,
which is protected by a screwable sintered filter (for cleaning).
The measured value will be changed into a standardized output signal for further processing.
Each device of this series passes through a 2-days test run.
Technical Specifications:
Relative humidity:
Measurement range relative humidity:
Measurement inaccuracy relative humidity:
Linearity:
Output relative humidity:
Output relative humidity:
Temperature dependence at 55% r.H.:
Temperature dependence at 55% r.H.:
Temperature:
Measurement range temperature:
Measurement inaccuracy temperature:
Output temperature:
Output temperature:
Temperature dependence at 20°C:
Temperature dependence at 20°C:
General Data:
Supply voltage 4...20mA:
Supply voltage 0-10V:
Power consumption:
Power consumption:
Electrical connection:
Housing / colour:
Protection class:
Electromagnetic compatibility:
Ambient temperature:
Operating range relative humidity:
Flow rate:
Storage temperature:
Sensor protection:
Display:
Test run:
0...100% r.H.
< 3% r.H. (in range of 30%...70% r.H. at 20°C, other operating range <5% r.H. at 20°C)
± 1% / year
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load current <500 Ohm)
< 0,02% r.F. / °C (voltage version)
< 0,04% r.F. / °C (current version)
-20…+80°C
< 0,3K (in range of 10...40°C, other operating range < 0,5K)
0-10V (voltage version, load current <0,1mA)
4...20mA (current version, load resistance <500 Ohm)
< 0,05°C / 10K (voltage version)
< 0,07°C / 10K (current version)
15...36V DC
Type H.618.1
24V AC/DC (± 10%)
Type H.618.2
Typ. 10mA (voltage version)
Max. 40mA (current version)
Screw terminal, cable diameter max. 1,5mm
Synthetic / white
IP65 (electronic assembly), version with display IP30
EN 61326-1997 +A1-1998 +A2-2001 (CE) fulfiled low voltage directive according to DIN EN 61010 part 1
-20...+80°C
0...99% r.H.
< 2m/s
0...+50°C
Ets FABRITIUS S.P.R.L.
Sintered filter
Avenue Van Volxem 180 - 1190 BRUXELLES
LCD-Display
Type H.618.3
Tél. : 32.2.343.39.32 - Fax : 32.2.344.57.94
At least 48h test run before delivery
E-mail: [email protected]