POWERPOD 1860
Transcription
POWERPOD 1860
POWERPOD 1860 POWERPOD 1860 800W 12-Channel Powered Mixer with Graphic EQ & DFX ● 400W + 400W output power ● Low cut filters, 3-band channel EQ and four AUX sends ● Stereo 7-band graphic EQ ● 16 high-definition digital effects ● Molded protection cover FEATURES ► 400W + 400W / 4 ohms stereo power amplifier (bridgeable and patchable) ► DFX, our 32/40-bit digital multi-effect processor with with 16 preset programs plus parameter control and foot switch jack ► 8 balanced Mic inputs with inserts ► Total of 12 Line inputs ► Two stereo Line input channels capable of accepting RCA/Phone inputs ► 3-band channel EQ ► Stereo 7-band graphic EQ ► Four AUX sends (AUX 1/2 are pre-fader and EFX 1/2 are post-fader) ► Two stereo AUX returns, each can be routed to AUX 1 & 2 sends (effect to monitor) ► Stereo RCA I/O for CD/TAPE external sources ► Grouped +48V real phantom power for broad application ► Mono output for extra zone filling or as subwoofer processing source ► PFL on each input and AFL on each output ► Standby switch to mute channels 1 through 12 for playing music between sets ► Zone 2 output for side fill or another PA system ► Headphone/control room output with rotary level control ► One professional Speakon-type jack and two 1/4” jacks per channel for speaker connection ► Rugged metal main chassis with integrated handle ► Low weight achieved by high-efficiency switching power supply ► Molded protective cover prevents scratching or damage to Mixer ► Mains power switchable between 115 VAC and 230 VAC The Phonic Powerpod Plus Series of mixers are Powered Mixers built into a compact and durable molded cabinet. Each Powerpod Plus has a built-in stereo amplifier which is bridgeable and patchable. Super Hi-Z inputs allow for the addition of guitars and other instruments. The mixers feature onboard DFX, our own 32/40-bit digital effects processors with 16 preset programs and parameter. The 3-band EQ on every channel and dual multi-band graphic EQ with selectable In/Out switches give you maximum control over your mix. POWERPOD 1860 Specifications THD POWER AMP, output power in watts @ THD<0.5%, 1KHz Number of Power channels 2 Power output, 1KHz, 20Hz to 20KHz Limiter 2 Any output, 1KHz@+14dBu, 20Hz a 20KHz, channels inputs 8 ohms per channel 260 CMRR 4 ohms per channel 400 1 Khz@-60dBu, Gain at maximum 8 ohms Bridge Mono 800 Crosstalk Inputs Total Channels 10 Balanced Mono Mic/Line Channels 8 (XLR+1/4” combo jack) Stereo Line Channels with mic preamp 2 (XLR & 2x1/4”) 2T Input 2 x RCA jacks Outputs Main L/R Stereo 2 x 1/4” TS, Unbal. 1/4” TS, Unbal. Main Mono Aux Send & Effect Send 4 x 1/4” TS, Unbal. Phones 1 2 x 1/4” TS, Unbal. Control RM or Zone 2 Output 2 x RCA jacks REC Out Volume Controls 20Hz~20KHz, line level o/p @ +4dBu into 600 ohms +0/-2dB 20Hz~20KHz, power amp o/p 1 watt into 8 ohms +0/-2dB Maximum Level Mic Preamp Input +22dBu All Other Inputs +22dBu Unbalanced output +22dBu Impedance 10K ohms Yes 600 ohms Yes All other outputs Yes Equalization 150 ohms 3-band, +15 dB On, Peak, Signal, PFL Low EQ 80Hz 60mm faders Mid EQ 2.5 KHz Hi EQ 12 KHz Low Cut Filter Master Section Aux Send Masters 2, 60mm fader Effects Return to Monitor Phones/Control RM/Zone 2 Level Control <-122dBm Yes Power Consumption (Average Maximum) 400 Watts Power Requirement Net Weight Dimensions (WxHxD) Metering Number of Channels 2 Switchable between 115/230 VAC, 50/60Hz 14.3Kg (31.5 lbs) 483 x 142.6 x 466.2 mm (19” x 5.6” x 18.4”) 13 Phantom Power Supply +48VDC Switch Rack Mounting Kit Master + 10 Effect Processor 16 effects with one main parameter control, foot switch Built-in Graphic EQ Center Frequency Microphone Preamp E.I.N. 150 ohms terminated, max gain Efx, Aux1, Aux2, Mono, Main L/R (60mm fader) Segments 75 Hz (-18dB/oct) Yes ST, PFL/AFL Control Room Mode Faders <-64dB Frequency Response (Mic input to output) RCA 2T Output Yes Insert <-63dB Channel muted, other channels at unity All Other Input (except insert) 4 LED Indicators Channel fader down, other channels at unity 5K ohms 10 Channel PFL with metering 1KHz @ 0dBu, 20Hz to 20KHz bandwidth, channel in to main L/R outputs 50K ohms Aux / Efx Control Channel On/Mute 80dB Line in Channel Strips Pan/Balance Control Stereo 7-band 63, 160, 400, 1K, 2.5K, 6.3K, 12KHz Range +12dB Noise: 20Hz to 20KHz bandwidth, IHF-A weighted, line inputs to main L/R outputs, all channels assigned, panned L/R <-94dBu Power amp output, all fader down <-63dBu 483 mm / 19" V1.2. 06/ 0 6 / 2 0 0 9 Information in this document is subject to change without notice. 142.6 mm /5.6" Master output, all fader down WWW.PHONIC.COM <0.3% Mic in 2 x speakon & 4 x 1/4” TS Speaker Outputs @200 watts, 4 ohms<0.5% PLUS
Similar documents
powerpod k12
The Phonic Powerpod K-12 Powered Mixer features a grand total of 12 input channels – each featuring 3-band, midadjustable EQ, gain control, and more – as well as a built-in power amplifier outputti...
More information