live performance console

LIVE PERFORMANCE CONSOLE
•
•
•
•
•
•
•
24, 32, 40 and 48 Input frames with 4 stereo inputs
8 subgroups
10 Aux busses
8 VCA Groups
6 Mute Groups
11x4 Matrix
Integral PSU
Performance
meets
affordability
As contractors and venues demand
maximum return on investment,
dual-purpose FOH and Monitors flexibility is now
essential in a live sound console.
The MH2, the third desk in Soundcraft’s
acclaimed MH Series, delivers all the
critical mixing features of its siblings in a
smaller footprint fixed frame format,
achieving a performance/price ratio unheard of
in any other console in its class.
Group or Aux fader operation is selected at the
touch of a button for familiar and
uncomplicated operation. Soundcraft sound
quality is guaranteed with the same mic preamp design used in the MH4 and MH3,
classic British EQ and meticulous circuit design.
And with important new features like separate
line inputs on every channel, the argument for
mixing with MH2 is compelling.
Four frame sizes are available, all with four
stereo inputs as standard and an integrated
switched mode PSU which can be removed for
easy maintenance. Naturally, a rear-panel
connector is provided to fit an external power
supply for complete dual-redundancy
assurance.
Mono inputs feature a wide range mic
pre-amp, 4-band swept EQ with swept
high-pass filter, 10 aux bus controls, paired
group routing, LCR panning and a 12-segment
LED input meter alongside a smooth 100mm
‘Alps K’ fader.
Stereo channels feature a similar preamp with
a fixed high-pass filter and 4-band EQ, together
with the same aux structure as the mono input.
The Master section features an 11x4 matrix, 4
stereo returns with 3-band EQ, 4-band
stereo EQ on Aux outputs 9/10, and the
ability to use the C fader to control the
monitor (listen wedge) output.
The MH2 is probably the most
comprehensively-featured VCA-based console in
its price range.
Key Features
• Frame Sizes 24+4, 32+4, 40+4, 48+4
• MH3/4 Mic preamp design with 50dB
range plus -20dB level shift and separate
1/4” line input
• Sweep high-pass filter and 4 band sweep
EQ
• 10 Aux busses, of which 2 can be
configured as a stereo send
• 8 full-time group busses
• True LCR panning on inputs to mix
• 8 VCA groups and 6 Mute Groups
• 4 Stereo channels and 4 Stereo returns
• Integral 11x4 Matrix
• 10 linear 60mm faders on groups or
auxes
• Inserts on group and mix outputs
• Integrated switched-mode PSU with
redundant supply connector
Preliminary information correct at June 2005. In the
interests of product development, Soundcraft reserves
the right to change the design and specification without
notice.
SOUNDCRAFT
Harman International Industries Ltd,
Cranborne House, Cranborne Road,
Potters Bar, Herts EN6 3JN
Tel +44 1707 665000
SOUNDCRAFT USA
8500, Balboa Boulevard, Northridge
CA91329 USA
Tel 818-920-3212
www.soundcraft.com