REBATES - Alliant Energy

Transcription

2015
Iowa Business
V
NERGY
E
E
A
B
RE
S AV
S
TE
EY
SA
REFRIGERATION • LIGHTING
HEATING • INSULATION
N
O
E M
a l l i a n t e n e r g y. c o m / r e b a t e s
2
3
Iowa
business
Where to find it
SectionPage
Small Business
Energy Assessment
Saving energy can boost your bottom line. But it can be hard to know
where your business is wasting energy and money. A free Small
Business Energy Assessment gives you the answers you need.
Air sealing................................................................................. 9
Appliance Recycling................................................................ 18
Business Resource Center..................................................... 16
Computer equipment............................................................. 17
Schedule free assessment
alliantenergy.com/startsaving
1-888-267-7516
Custom Rebates..................................................................... 17
Commercial New Construction.............................................. 14
Dealer Locator........................................................................ 16
Discover
Duct repair and duct sealing..................................................... 9
Assessor evaluates energy use.
Qualifications
• Assessment must be
conducted in a conditioned
space to which Alliant Energy
supplies the primary
heating or cooling energy.
Energy assessment.................................................................. 3
Food service equipment......................................................... 12
Heating and cooling.................................................................. 8
Insulation.................................................................................. 9
Lighting................................................................................ 4 - 5
Instant savings
• Building must have been built
before January 1, 2005.
Assessor installs free products.
• Building less than or equal to
20,000 sq. ft.
Motors.................................................................................... 15
Multifamily new construction................................................. 14
Rebate finder................................................................... 20 - 29
Refrigeration ................................................................... 10 - 11
Small Business Energy Solutions........................................ 6 - 7
• Renter needs owner’s prior
approval.
Consider
Consider recommended projects, paybacks and rebates from Alliant Energy.
Get started
Complete
Call 1-888-267-7516 or visit
alliantenergy.com/startsaving
to schedule your Small Business
Energy Assessment today.
Terms and conditions............................................................. 19
Variable frequency drive......................................................... 15
Water heating......................................................................... 13
Move forward with selected projects.
Keep saving
Collect Alliant Energy rebates.
Enjoy long-term savings.
For more information, go to
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
4
5
Lighting
Lighting
There are huge dollar savings hidden in your inefficient lighting. Energy-efficient
equipment, effective controls and a well-planned design can result not only in
energy savings, but increases in productivity, aesthetics and safety.
Linear fluorescents
Fluorescent tube lighting is a great way to light up large spaces, but not all
fluorescents are created equal. Energy-efficient T8 lamps are up to 40% more
efficient than old, inefficient T12 lamps. Bonus – they also reduce eyestrain and
present colors closer to natural light.
Do you have
T12 lighting?
The simplest way to tell if you
have T12 lighting in your facility is to look at the end of a
fluorescent tube. If it’s 1.5” in
diameter, it is likely an inefficient
T12 lamp.
High bay
Lighting in warehouse, retail, manufacturing and industrial environments with
ceiling heights greater than 20 feet is a challenge. Replacing outdated High
Intensity Discharge (HID) fixtures with specially designed T8 or T5 fixtures can
have a simple payback as little as two to four years.
T12
Induction
Induction lighting is essentially a fluorescent light without electrodes or filaments,
the parts that often cause fluorescent bulbs to burn out. With an average rated
life of 100,000 hours (that’s 11+ years, operating 24 hours per day) it’s a great
solution where accessibility to change the lamp is a challenge.
Lighting controls
Even energy-efficient lighting saves money when turned off. Adding lighting
controls increases the flexibility of your lighting plan.
CFLs and LEDs
Easy energy savings: Count the number of screw-in bulbs in your office,
break room, restrooms and storage areas. Consider the savings for one bulb.
Bulb type
Operating cost
Incandescent 60 watt bulb
$17.86 per year
CFL 13-18 watt bulb
$4.61 per year
LED 6-8 watt bulb
$2.08 per year
Exit signs
Exit signs: Each one uses relatively little electricity, but they are on all the time.
And there are a lot of them in schools, factories and office buildings.
1.5”
T8
1”
In fact, the Environmental Protection Agency estimates that there are more
than 100 million exit signs in the U.S., consuming 30-35 billion kilowatt-hours
(kWh) of electricity annually.
LED traffic lights
LED traffic lights use approximately 90% less energy than their incandescent
counterparts, but that’s just one advantage. Because they last so long,
maintenance costs are reduced by 75%. This results in a simple payback as
short as one to three years.
For a complete listing of lighting rebates and
qualifications, please turn to pages 20-21.
T5
5/8”
or call
1-866-ALLIANT (866-255-4268).
FFoorr m
moorree iinnffoorrm
maattiioonn,, ggoo ttoo
oorr ccaallll
1-866-ALLIANT (866-255-4268).
6
7
Small Business
Energy Solutions
Turnkey
lighting
If it’s time for a lighting upgrade, consider Small Business Energy Solutions. The
program pays up to 75% of the total project cost directly to your contractor.
Schedule free lighting evaluation
alliantenergy.com/simplesavings
1-866-857-8782
Alliant Energy offers great rebates
on lighting equipment, and now
we’ve added a complete turnkey
lighting program that pays up to
75% of the total project cost right
off the top! You simply pay the
remaining balance.
With the Small Business Energy
Solutions program, you don’t
have to wait for a rebate check.
Alliant Energy pays $0.14 per
kWh saved directly to your
selected lighting contractor.
Discover
Contractor evaluates current lighting,
provides project proposal.
Consider
Consider recommended projects,
paybacks and rebates from Alliant Energy.
Iowa business shines with
nearly $6,000 in annual
electric savings
Complete
Contractor completes approved lighting
projects.
Save
Alliant Energy rebates pays up to 75% of your
project cost. You simply pay the balance.
PROJECT SNAPSHOT
Total project cost: $11,780
Alliant Energy incentive: $8,165
Customer balance: $3,615
Estimated annual electric savings: $5,832
Building Materials, Inc. in Fort Madison, Iowa relies on a well-lit
showroom to display its inventory. But the building suffered from a lack of
natural light and outdated and unreliable fixtures.
Building Materials owner Tom Merschman addressed these challenges
with the help of Alliant Energy’s Small Business Energy Solutions program.
After an evaluation of existing lighting, Merschman upgraded his fixtures.
The new fixtures better showcase inventory and are up to 40% more
efficient than the old ones. Best of all, the program covered almost 70%
of the upgrade cost.
If you want to start saving like Tom, call 1-866-857-8782 or visit
alliantenergy.com/simplesavings.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
8
9
Heating and
cooling
Is it time to invest in new equipment to keep your
business comfortable?
With rebates for boilers, chillers, heat pumps, high-efficiency fan motors and thermostats
there is an option for everyone. If you’re not ready to replace your system, check out our
heating ventillation and air conditioning (HVAC) tuneup rebate!
System tuneup
Keep your current HVAC equipment working at its best. With our HVAC tuneup rebate,
there is one more reason to get an annual check up to keep your system operating at its
peak efficiency.
Insulation
and air sealing
What’s the number one way to save energy? It’s insulation. Start with a free Small
Business Energy Assessment to find out where you need insulation and have air leaks.
Find details on page 3. Now our rebates include ductwork insulation, repair and sealing.
Duct insulation
You’re paying to heat or cool the air that runs through the ductwork. Up to 30% of your energy
can be lost if your ductwork is not insulated. Insulating ductwork is especially important if the
ducts run through unconditioned spaces. The air running through the ducts can be warmed or
cooled by the air temperature of the spaces the ducts run through.
See all the rebates for insulation and air sealing on page 24.
Hotel key card system
The guestroom key card energy management system can send guest rooms into an
occupied or unoccupied mode and change the room settings to save energy. This technology
provides guests with the control they want, while you save anytime the room is empty.
Programmable thermostat
Duct repair and sealing
Did you know up to 20% of your conditioned air could be leaking through your ducts? The result
is higher energy bills and difficulty keeping your business comfortable. Stop duct leaks by
repairing and sealing your ducts.
Programmable thermostats can help you save up to 10% on heating and cooling when you
adjust your thermostat for eight hours a day. Wi-Fi programmable thermostats will allow
you even more control – and potentially greater savings – through your phone or other
mobile devices.
Chiller pipe insulation
Do you have piping in unconditioned spaces? Adding insulation on chiller pipes keeps the
temperature of the water running through the pipes cooler, improving the system’s
efficiency. Plus, it can control condensation on the pipes.
Boiler vent damper
Improve gas boiler efficiency with a boiler vent damper. It keeps cold air out and warm air
in. The damper automatically allows the boiler to exhaust properly during operation, but
prevents conditioned air from leaving your business.
ECM furnace motor
Electronically commutated motors (ECM) deliver multiple advantages. They run cooler and
quieter and require less maintenance over a longer lifespan – all while using up to 50% less
energy compared to induction motors.
Heating and cooling rebate details available on pages 22-23.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
10
11
Refrigeration
Keeping it
cool
Anti-sweat heater control
Electronically commutated motor
Refrigerated glass display cases use anti-sweat heaters to prevent moisture from
forming on their glass and frames. Most typically operate 24 hours a day, 365 days a
year, even when conditions don’t require it. That can add up to as much as $200 per
year per door in energy costs!
Evaporator units, each with a small fan motor, are integral components of walk-in refrigerators
and freezers. Though each motor is small, when considered together and running continuously,
the energy consumption is considerable. Installation of an electronically commutated motor
(ECM) can significantly reduce energy consumption and your energy bill.
Adding anti-sweat heater controls saves you energy and money, in the range of
70% to 90%. Controls must automatically reduce energy consumption of the
anti-sweat heaters by at least 50%.
To qualify for a rebate, the shaded-pole or permanent-split capacitor evaporator fan motors
must be replaced.
Scroll compressor
Walk-in strip curtain
It’s low-tech, easy to install, uses no energy to operate and continuously saves energy and money. What is it? It’s the strip
curtain on your walk-in refrigerator or freezer. By keeping dry, cold air in, and warm, moist air out, strip curtains lower
electric bills and extend product life. In addition to saving energy, they
help keep out dust, debris and bugs!
Scroll compressors not only use less energy, but have significantly fewer moving parts,
resulting in superior performance, lower maintenance cost and greater reliability.
To qualify for rebate, the reciprocating compressor must be replaced.
Display case night cover
To qualify for a rebate, the opening between the strip curtain and bottom of doorway must be no larger than one inch. Strips must have an
overlay greater than one inch.
Leaving display coolers uncovered at night can waste a lot of
energy. Using night covers on display coolers lowers heating and air
conditioning costs.
Walk-in evaporator fan controller
To qualify for a rebate, you must install a cover on an existing open
refrigerated display case.
Evaporator fans typically run at normal speed all the time, regardless
of demand. An evaporator fan controller will automatically adjust fan
speed, without impacting the overall temperature of the cooler or
freezer.
For a list of all refrigeration rebates see page 25.
To qualify for a rebate, the fan motor power must be reduced by at
least 75% when the compressor(s) cycle off.
Refrigeration tuneup
Keep your refrigeration working at its best. With a new refrigeration
tuneup rebate, there is one more reason to get an annual checkup to
keep your equipment running at its peak efficiency.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
12
13
Food service
equipment
Rebates on everything but the kitchen sink
Does your business use a lot of water? It’s typically the second biggest energy user, right behind heating and
cooling. Saving energy can help your bottom line.
Alliant Energy’s food service rebates aren’t just for restaurants!
Schools, grocery and convenience stores, community
centers and churches – any place there’s food service
preparation, there’s potential for energy savings.
Drainwater heat transfer system
Use the water you’ve already paid for to preheat more water. Drainwater heat recovery systems can recover heat from
the hot water used in showers, dishwashers and clothes washers.
Whether you’re serving up school lunches or dinners at a
five-star restaurant, it’s an energy-intensive business. In fact,
according to ENERGY STAR®, the annual cost to operate a
single gas or electric fryer is often more than the
annual utility bill of an average home.
Swimming pool cover
Don’t let your energy dollars swim away. Save up to 70% on heating costs by using a pool cover. Pool covers reduce
heat loss, water evaporation and saves money.
Red-hot rebates
Spa and hot tub cover
Investing in new ENERGY STAR qualified cooking equipment
could save you up to 30% on energy costs. Alliant Energy
rebates range from $500 to $1,500 help you make the
upgrade on cooking equipment including:
•
•
•
•
•
•
•
•
Water heating
Relax, we’ve got you covered – with a rebate that is. A well-insulated spa or hot tub cover traps in the warmth of your
hot tub or spa and reduces water evaporation.
Water heater
Broilers
Fryers
Griddles
Steam cookers
Convection ovens
Conveyor ovens
Rotisserie ovens
Rotating rack ovens
Use of a high-efficiency water heater can cut your costs up to half, according to ENERGY STAR®.
Check out water heating rebates on page 24.
Find complete food service rebate qualifications on page 28.
On the cooler side
Alliant Energy can also help you to keep things cool with rebates on all sizes of new solid and glass door refrigerators and
freezers.
Cleaning up
Serving all those delicious meals can result in a mountain of dirty dishes, pots and pans. Not to mention silverware!
Alliant Energy helps you clean up for less with new commercial dishwasher rebates of $125 to $250. There are rebates
on new commercial clothes washers too for all those aprons, towels and uniforms.
Craving savings
Check out rebates for vending machines on page 25.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
14
15
Commercial
New Construction
Plan ahead
to maximize
A customized energy model simulates energy use for your facility, demonstrating which strategies
have the greatest impact and are the most cost effective.
Strategies are then selected by the building owner and their design team, assisted by the energy
design consultant.
Systems available for energy modeling include:
• Daylighting controls
• Load responsive equipment
• Envelope
• Outside air-control
• Heating and cooling • Window layouts
Motors
Energy-efficient motors pay for themselves
The extra cost of an energy-efficient motor is often quickly repaid in energy savings, especially when you factor in a
rebate from Alliant Energy. Lower operating and maintenance costs, coupled with relatively short payback periods,
make efficient motors a sound business investment.
Industrial electric motors represent the single largest end use of electricity in the United States. The Department of
Energy estimates that 25% of the electricity sold is consumed by industrial electric motors used to power production
processes and heating, cooling and ventilation systems.
• Lighting controls and design
Find rebate information on motors and VFDs on pages 26-27.
Customers interested in the Commercial New Construction program should contact Alliant Energy
before design development. This allows time to incorporate energy-efficient strategies into the
building process.
Multifamily new construction
Multifamily is defined as more than three units in one building shell, three stories or less, located
on one lot.
The following multifamily buildings are eligible:
• Apartments
• Prisons
• Condos
• Senior living or nursing homes
• Dormitories
• Shelters
• Lofts
Variable frequency drive
Add variable frequency drives for even greater
savings to your energy-efficient motor.
Minimizing operational costs can mean the
difference between success and failure for
many companies. Optimizing motor system
efficiency can significantly reduce operational
costs. That’s where variable frequency drives
(VFDs) come in. VFDs match the speed of
motor-driven equipment to the process,
simultaneously reducing operating costs and
improving overall efficiency with typical energy
savings up to 50%.
For projects that don’t qualify under Commercial New Construction, consider multifamily new
construction.
Multifamily rebates are calculated per square foot:
Heating and cooling
$1.00 per square ft.
Heating
Cooling
For more information contact your dedicated key account manager or the Business Resource
Center at 1-866-ALLIANT.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
16
17
Resources
Computers
Business Resource Center
Computer equipment
Energy consultants are ready to help you start saving.
Start saving money on energy costs today by upgrading the equipment your
employees use most – computers, servers and software.
By phone, online or via email, we’re here for you.
Power management is also important to saving energy. ENERGY STAR power
management features place computers (CPU, hard drive, etc.) into a low-power
“sleep mode” after a designated period of inactivity. Simply hitting a key on the
keyboard or moving the mouse awakens the computer in a matter of seconds.
1-866-ALLIANT (866-255-4268)
[email protected]
alliantenergy.com/brc
8 a.m. to 5 p.m. Monday through Friday
Find complete
rebate information
and qualifications
on page 29.
An ENERGY STAR qualified computer delivers substantial savings over a
conventional computer. Eligible equipment includes:
• Servers
• Thin client
• Desktop and intergrated computers
• PC network management software
Doing business with Alliant Energy
Everyone uses energy differently - and pays their bills in
different ways. Choose the option you like best. You can
go paperless, set up automatic payments, pay from your
mobile device, set up a one-time payment online or by
phone, or even send a check in the mail. Review all the
Custom Rebates
options at alliantenergy.com/paymybill.
Dealer Locator
Finding an energy-smart contractor near you is as
easy as 1, 2, 3
Build your own customized rebate
Sometimes the hardest part of the job is finding someone
Not all building or remodeling projects fit in a predetermined package, which is why you should keep Custom
Rebates in mind if you are:
• Considering a process improvement project
• Combining more than one type of high-efficiency equipment
• Installing equipment that doesn’t qualify for standard rebates
to do the work! Alliant Energy can help with our online
Dealer Locator.
Step 1 Start at alliantenergy.com/dealerlocator
Step 2 Enter your zip code, select customer type and type of contractor you’re looking for and search
within a 25, 50 or 100-mile radius
Eligible equipment includes, but is not limited to:
• Compressed air system
• Lighting systems and controls
• Combined heat and power project • Processing equipment
• Heating, cooling and ventilation system
• Waste heat recovery system
Step 3 Click “submit” and find a list of professionals participating in the Energy Efficiency Dealer Rebate calculation
Network program
PROJECT COST - REBATE
= NET PAYBACK
ANNUAL ENERGY DOLLAR SAVINGS*
Get started today
Before making a commitment to proceed with a project, pre-approval must be obtained from Alliant Energy.
Call Alliant Energy at 1-866-ALLIANT (866-255-4268) or contact your dedicated key account manager to start saving.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
18
19
Terms and conditions
Second Nature™
IMPORTANT: Please read the following information before completing the rebate claim form.
1. Participants must be an Iowa customer of Alliant Energy.
2. Alliant Energy must supply the primary energy to the equipment for which the
rebate is being paid. Some exceptions apply.
Important
information
3. Rebate amount will not exceed 50% of equipment purchase price, excluding
insulation and sealing.
Support renewable energy by selecting a monthly contribution amount that is right for
your business. For every kWh your business supports, Alliant Energy purchases renewable energy from sources within our service territory and then adds it to the power grid,
replacing energy that would be otherwise generated from fossil fuel sources.
Your customers will appreciate your dedication to renewable energy. Plus there is no
need to purchase any equipment or agree to any long-term contracts. It is a win-win!
To enroll in Second Nature or for more information, visit alliantenergy.com/secondnature.
Appliance
Recycling
4. Equipment must be new equipment and installed on the premises and must not be
purchased for resale. Refurbished equipment is not eligible. Some exceptions apply.
5. Alliant Energy reserves the right to inspect and verify the installation.
6. Alliant Energy reserves the right to meter the specified equipment or process, at
no cost to the customer, to determine the actual energy saved for up to 18 months
after installation.
7. Rebates apply to new and replacement installations of qualified equipment. In replacement situations, the efficiency of the equipment installed must be higher than
that of the equipment removed.
8. Customers are responsible for ensuring the equipment installed for this program
meets all applicable codes, standards and regulatory requirements.
9. Alliant Energy does not guarantee that installation of high-efficiency equipment will
result in reduced usage or demand, or in cost savings.
10.Alliant Energy makes no warranties, expressed or implied, with respect to any
equipment purchased and/or installed including, but not limited to, any warranty of
merchantability or fitness for a particular purpose.
Let us do the heavy lifting. If you have a working refrigerator, freezer or room air conditioner you don’t need, give us a call. We’ll send a recycling contractor to pick up and
dispose of your old appliance properly – and we’ll give you a check on the spot for that
appliance.
10 cubic feet or larger, no commercial sizes
Working* freezer and refrigerator.............................................................................. $50
Working* room air conditioner................................................................................... $25
*Motor must run and unit must cool
To schedule your appliance pickup, call 1-866-ALLIANT (866-255-4268).
11.In no event shall Alliant Energy be liable for any incidental or consequential
damages.
12.Alliant Energy does not endorse any particular manufacturer, product or system
design in promoting this rebate program. Listing a product does not constitute an
endorsement, nor does it imply that unlisted products are defective in any way.
13.Alliant Energy reserves the right to modify or end this rebate program at any time
without prior notice.
14.These programs are effective January 1, 2015 through December 31, 2015 and are
subject to periodic review by Alliant Energy.
15.Any purchase of energy-efficient equipment must occur between January 1, 2015
and December 31, 2015 to qualify for rebates. Receipts must show retail equipment
cost. Installation of energy-efficient equipment must occur between January 1, 2015
and January 31, 2016.
How to apply and
qualify for rebates
Customers are encouraged
to fill out and return the
rebate form(s) and a copy of
your sales receipt or itemized invoice within 90 days
of installation/completion
for your selected product or
service. Failure to do so could
result in a delay processing your
claim. Please note that some
products and services may require additional documentation
(like a UPC code or ENERGY
STAR logo from a product box).
These additional requirements
are noted on each rebate claim
form.
Rebate forms for products and
services that are commonly
completed by the equipment
installer can be obtained directly
from the place of business. All
rebate forms can be accessed
online at alliantenergy.com/forms.
In addition, you can call
1-866-ALLIANT (866-255-4268)
from 8 a.m. - 5 p.m.
Monday - Friday to have forms
mailed to you.
16.Alliant Energy reserves the right to contact customers who participate in the rebate
programs for surveys to monitor and evaluate program performance.
17.Submit claim forms within 90 days of installation or by January 31, 2016, whichever
comes first.
18.Rebate claim forms postmarked after January 31, 2016 may be subject to 2016
program rebate changes.
19. By participating in Alliant Energy’s energy-efficiency programs, you agree to the
terms of Alliant Energy’s Privacy Policy, available at alliantenergy.com/privacy.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
20
21
2015 Iowa business rebates
Lighting
D Indicates rebates available for new construction. All other rebates for existing buildings only.
Bulbs and/or fixtures must be ENERGY STAR® or DesignLights Consortium™ (DLC) qualified as appropriate.
Program/equipment
ENERGY STAR CFLs
Qualification (additional information on claim forms)
Minimum purchase 10 bulbs
®
Minimum purchase price $1 per bulb
ENERGY STAR CFL fixtures
Rebate
Rebate
< 75 watt
$30/fixture
76 -180 watt
$50/fixture
181-250 watt
$100/fixture
Existing construction only
$5/fixture
$20
Photoluminescence exit sign
Must replace incandescent or CFL exit sign
$10/fixture
Traffic light: red 10" or 12" lamp
Yellow lights do not qualify
$25/lamp
Traffic light: red 8" lamp
Only replacement projects qualify for rebates
$20/lamp
Traffic light: green 10" or 12" lamp
New construction projects are not eligible
$50/lamp
$10
LED fixtures replacing HID
≤ 30 watt
$30
ENERGY STAR or DLC qualified
31-100 watt
$50
≥ 101 watt
$100
LED replacements for linear
fluorescent fixtures
Existing systems only
$0.40
per watt
reduced
4-ft. high performance T8 fixture
Replacing T8 or T12 lamp and ballast
$3.25/lamp
Traffic light: green 8" lamp
$40/lamp
Traffic light: green arrow lamp
$40/lamp
Traffic light: 12" don't walk lamp
$25/lamp
Traffic light: 8" don't walk lamp
$20/lamp
Bi-level control for stairwell or
corridor lighting
Bi-level stairwell occupancy sensor control
Ballast factor < 0.79
Lamp and ballast combinations must be listed on the
CEE high-performance T8 qualifying products list
Daylighting controls with daylight
harvesting ballast
Minimum 45 watt controlled per control
$25/control
Occupancy sensor
Wall-switch, fixture-mounted, remote-mounted
$20/control
$4/lamp
Controlling > 45 watt and < 500 watt
Lamp and ballast combinations must be listed on the
CEE high-performance T8 qualifying products list
(available at alliantenergy.com/rebates)
Wall-switch, fixture-mounted, remote-mounted
$14/lamp
4-ft. high bay T5 high output fixture
Fixtures above 15 ft.
$15/lamp
T8 or T12 delamping
Completed project must result in a net reduction in the
quantity of lamps
$0.50/ft.
The total number of lamps claimed for delamping
cannot be more than the number of replacement lamps
installed
< 320 watt
$40/control
Controlling > to 500 watt
Fixtures above 15 ft.
Delamping must be accompanied by lamp and ballast
replacement/retrofit
$25/control
50% lighting power during unoccupied time
Ballast factor < 0.79
4-ft. high bay T8 fixture
Pulse start or ceramic metal halide
Induction lighting
LED replacement exit sign
HID (high bay) delamping
Program/equipment
50% of
equipment
purchase
price
Screw-in LED bulbs
4-ft. reduced wattage T8 fixture
Replacing T8 or T12 lamp and
ballast
Lighting (con’t.)
Time clock and lighting timer
Minimum 45 watts controlled per control
$20/control
Existing construction only
Commercial grade
To be eligible for rebate, electrical equipment must be
ENERGY STAR® or DesignLights Consortium® qualified.
$0.05/rated
fixture watt
$25/fixture
Must replace probe start fixtures
The retrofit kit must include lamp and ballast
Pulse start or ceramic metal halide
> 320 watt
$50/fixture
Must replace probe start fixtures
The retrofit kit must include lamp and ballast with fixture
Metal halide replacement lamp
< 360 watt replacing 400 watt
$3/lamp
Lamp replacement of an existing 400 watt metal halide
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
22
23
Heating and cooling
Heating and cooling (con’t.)
Equipment must be listed in the current AHRI or ENERGY STAR directories.
Program/equipment
Program/equipment
Chillers
Rebate
Water-cooled positive displacement/reciprocating
$7/ton
Rebate
Natural gas boiler
< 300 MBTUH must be listed in AHRI
87% to 89% AFUE
$300
90% AFUE or greater
$800
Boiler vent damper
Automatic air flue damper
$150
Natural gas furnace
Maximum BTUH 225,000
Furnace > 94% AFUE
$500
Furnace > 96% AFUE
$700
Variable refrigerant flow
ductless heat pumps
Equipment > 1 ton and < 5 tons
$200 per
outdoor unit
Equipment > 5 tons
$50/ton
Air conditioning
Maximum rebate 50% of total tuneup cost
$20/ton
Size tons > 300 and < 600: full load - kW/ton < 0.549
IPLV - kW/ton < 0.523
Heat pump
$20/ton
Size tons > 600: full load - kW/ton < 0.543
IPLV-kW/ton < 0.513
Chiller
$10/ton
Air-cooled
Natural gas boiler or furnace
$0.35/MBTU
minimum $50
Must have a 7 day, 5+2 day or 5-1-1 day program
Up to $50
HVAC system tuneup
Alliant Energy must provide HVAC
system’s natural gas or electricity
Programmable thermostat
Size tons < 150: full load-kW/ton < 0.738 IPLV - kW/ton
< 0.586
Size tons > 150 and < 300: full load - kW/ton < 0.648
IPLV - kW/ton < 0.552
Size tons > 300: full load - kW/ton < 0.59 IPLV - kW/ton
< 0.514
Water-cooled centrifugal
Size tons < 300: full load - kW/ton < 0.604 IPLV - kW/
ton < 0.568
Controls room HVAC and lighting
$70/control
Controls HVAC only
$50/control
Air conditioner
< 65,000 BTUH
SEER/EER 14.5/12.0
Must be listed in AHRI directory
$25/ton
Size tons < 150: full load - EER > 10.04 IPLV - EER
> 13.125
Size tons > 150: full load - EER > 10.04 IPLV - EER
> 13.388
Size tons > 600: full load - kW/ton < 0.543 IPLV - kW/ton
< 0.513
Includes Wi-Fi models
Hotel key card system D
$15/ton
Chiller pipe insulation
> R11; must exceed Iowa State Energy Code,
existing buildings only
$2/linear foot
$200
Package terminal air conditioner
Minimum EER - 10.5
$40
SEER/EER 15.0/12.5
$350
Package terminal heat pump
Minimum EER - 10.5 and minimum COP - 3.0
$75
SEER/EER 16.0/13.0
$500
Electrically commutated fan motor
Installed on natural gas furnace
$100
SEER/EER 18.0/14.0
$650
$100
> 65 and < 135 MBTUH: minimum EER - 11.5
$50/ton
Steam trap
Must be industrial, HVAC or dry cleaner application
Premium-efficiency air conditioner
> 65,000 BTUH
> 760 MBTUH: minimum EER - 9.7
Air-source heat pump
< 65 MBTUH
Tier 1 SEER/EER 14.5/12 and HSPF 8.2
$300
Tier 2 SEER/EER 15.0/12.5 and HSPF 8.5
$400
Tier 3 SEER/EER 16.0/13.0 and HSPF 9.0
$600
Premium efficiency
air-source heat pump
> 65 and < 135 MBTUH:
$150/ton
> 65 MBTUH
> 135 and < 240 MBTUH:
> 240 and < 760 MBTUH:
Maximum 20 tons
Geothermal heat pump
Maximum 20 tons
Units over 20 tons are eligible for
Custom Rebates call 1-866-255-4268
Desuperheater
$800/ton
$1,200/ton
$1,600/ton
Add-on for air-source or geothermal heat pump
$150
Tonnage is defined as the sum of the units that make up the system. One geothermal rebate per well field.
Additional units drawing from the same well field are eligible for equipment-only rebates. For more information, go to
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
24
25
Refrigeration
Insulation and air sealing
Program/equipment
Insulation
New construction does not qualify
Program/equipment
Qualification (additional information on
claim forms)
Rebate
Must complete a Small Business Energy
Assessment prior to start of work
70% of total cost up to a
maximum of $5,000 for
each:*
• Ceiling insulation
• In-wall insulation
• Foundation
• Rim/band joist
Must receive primary heating energy from
Alliant Energy
Customer, not contractor, must apply for
the rebate
Renters need owner’s prior approval
See rebate claim form for complete list of
qualifications
Building sealing
Weather stripping, caulk, window
film, etc.
Must complete a Small Business Energy
Assessment prior to start of work
70% of the total cost
up to a maximum of
$1,500*
Duct repair and sealing
Retrofit only
$0.15/linear ft. of duct
Duct insulation
R-8 (unconditioned spaces)
$0.30/linear ft. of duct
Rebate
Anti-sweat heater control
Must sense the relative humidity in the air surrounding $35
the display case and reduce or turn off the anti-sweat
heaters on the glass door (if applicable) and door
frame during periods of low humidity
ECM motor for refrigerated display
cases and walk-in unit
Must replace existing standard efficiency shaded-pole
or permanent split capacitor evaporator fan motors in
refrigerated display cases and walk-in coolers
$100
Scroll compressor
Must replace reciprocating compressor
$70
Strip curtain for walk-in unit
New strip curtain must be installed on doorways of
refrigerated spaces (conditioned to less than 50 F)
$5/sq. ft.
Evaporator fan controller for
walk-in unit
Must manage a minimum fan load of 1/20 hp when
the fan(s) operate continuously at full speed
$65
Must reduce fan motor power by at least 75% when
the compressor(s) cycle off
Night cover for display case
Retrofit only
LED refrigeration case lighting
Customer must have completed a Small
Business Energy Assessment prior to
start of work
Vending machine controller
Must install a cover on an existing open refrigerated
$7/linear ft.
display case to decrease cooling load of the refrigerated
case during off hours
$2/linear ft.
Vending Mi$er or comparable brand
$50
For indoor machines that dispense non-perishable cold
beverages only
Solid replacement door
U-factor < 0.10
$200
Vending machine
ENERGY STAR qualified
$75
Storm doors do not qualify
U-factor < 0.35
$25
Refrigeration tuneup
Must be performed by external contractor
$20/ton
Maximum rebate 50% of tuneup cost
Water heating
Program/equipment
Rebates
Electric heat pump water heater
Energy factor > 2.0
$500
Natural gas storage water heater
Minimum 40 gallon capacity
Energy factor > 0.67
$70
Natural gas condensing water heater
Thermal efficiency > 0.9
$300
Natural gas tankless water heater
Energy factor > 0.82
$200
< 75,000 BTUH
> 50,000 BTUH and < 200,000 BTUH
> 4,000 BTUH/gallon and < 2 gallons
Drain water heat transfer system
Per water heater
$400
Outdoor swimming pool cover
Minimum R-value of 1.5
$0.50/sq. ft.
Outdoor spa/hot tub cover
Minimum R-value of 14
$7/sq. ft.
*For multifamily dwellings, call 1-866-ALLIANT for pre-approval. Multifamily is defined as more than three units in
one building shell, three stories or less, located on one lot.
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
26
27
Open drip proof (ODP)
Motors and variable frequency drives
Totally enclosed fan cooled
Qualification (Additional information on claim forms)
Rebates
Horsepower
(hp)
RPM
Minimum
efficiency (%)
Rebate ($)
Minimum
efficiency (%)
Rebate ($)
Motor D
Ultra-premium rated, 1-350 hp
See chart
30
3600
92.4%
$300
92.4%
$250
Variable frequency drive D
Must control a motor > 5 and < 200 hp
$35 per hp
controlled
30
1800
94.6%
$150
94.1%
$250
30
1200
94.1%
$150
93.6%
$320
40
3600
93.0%
$260
93.0%
$265
40
1800
94.5%
$220
94.5%
$275
Program/Equipment
Open drip proof (ODP)
Totally enclosed fan cooled
Horsepower
(hp)
RPM
Minimum
efficiency (%)
Rebate ($)
Minimum
efficiency (%)
Rebate ($)
40
1200
94.5%
$240
94.5%
$480
1
3600
84.0%
$50
84.0%
$60
50
3600
93.6%
$150
93.6%
$390
1
1800
86.5%
$25
86.5%
$45
50
1800
95.0%
$130
95.0%
$375
1
1200
84.0%
$25
84.0%
$45
50
1200
94.5%
$240
94.5%
$530
1.5
3600
85.5%
$50
85.5%
$30
60
3600
94.1%
$155
94.1%
$390
1.5
1800
87.5%
$40
87.5%
$55
60
1800
95.4%
$255
95.8%
$480
1.5
1200
87.5%
$40
88.5%
$30
60
1200
95.0%
$280
95.0%
$565
2
3600
86.5%
$30
86.5%
$45
75
3600
94.1%
$390
94.5%
$720
2
1800
87.5%
$30
87.5%
$65
75
1800
95.4%
$320
95.8%
$720
2
1200
88.5%
$30
89.5%
$45
75
1200
95.0%
$390
95.0%
$720
3
3600
86.5%
$40
87.5%
$80
100
3600
94.5%
$730
94.5%
$870
3
1800
90.2%
$40
90.2%
$65
100
1800
95.8%
$395
95.8%
$805
3
1200
89.5%
$55
90.2%
$80
100
1200
95.4%
$395
95.4%
$1,230
5
3600
89.5%
$70
89.5%
$60
125
3600
94.5%
$445
95.4%
$595
5
1800
90.2%
$50
90.2%
$70
125
1800
95.8%
$500
95.8%
$875
5
1200
90.2%
$50
90.2%
$115
125
1200
95.4%
$470
95.4%
$780
7.5
3600
89.5%
$115
90.2%
$90
150
3600
94.5%
$330
95.8%
$1,200
7.5
1800
91.7%
$90
92.4%
$80
150
1800
96.2%
$315
96.2%
$1,050
7.5
1200
91.7%
$155
91.7%
$170
150
1200
95.8%
$625
96.2%
$1,465
10
3600
90.2%
$55
91.0%
$100
200
3600
95.4%
$625
95.8%
$880
10
1800
92.4%
$125
92.4%
$100
200
1800
96.2%
$540
96.5%
$905
10
1200
92.4%
$200
91.7%
$200
200
1200
95.8%
$980
96.2%
$1,130
15
3600
91.0%
$130
91.7%
$195
250
3600
95.0%
$975
95.8%
$1,700
15
1800
93.6%
$130
93.0%
$100
250
1800
95.8%
$1,650
96.2%
$1,650
15
1200
92.4%
$245
92.4%
$230
250
1200
95.8%
$1,650
95.8%
$1,700
20
3600
91.7%
$120
92.4%
$250
300
3600
95.4%
$1,200
95.8%
$1,890
20
1800
93.6%
$145
93.6%
$150
300
1800
95.8%
$1,440
96.2%
$1,740
20
1200
93.0%
$245
92.4%
$325
300
1200
95.8%
$1,440
95.8%
$2,670
25
3600
93.0%
$260
92.4%
$250
350
3600
95.4%
$1,400
95.8%
$2,205
25
1800
94.1%
$155
94.5%
$250
350
1800
95.8%
$1,540
96.2%
$2,065
25
1200
93.6%
$150
94.1%
$250
350
1200
95.8%
$1,540
95.8%
$2,380
or call
1-866-ALLIANT (866-255-4268).
or call
1-866-ALLIANT (866-255-4268).
28
29
Food service equipment
Computer equipment
Only new equipment qualifies.
Equipment must be ENERGY STAR qualified and located in a building that receives electricity from Alliant Energy.
Program/equipment
Rebate
Under-counte, pot pan and utensil
$125
Stationary single-tank door, single-tank conveyor,
multi-tank conveyor
$250
Clothes washer D
Commercial, ENERGY STAR
Alliant Energy must supply the energy for the water
heater MEF > 2.2, WF < 4.5
$200
Refrigerator, solid door D
15-29 cubic feet
$25
30-49 cubic feet
$100
> 50 cubic feet
$200
Other programs
< 15 cubic feet
$15
Program/equipment
15-29 cubic feet
$150
30-49 cubic feet
$300
Motor must run and unit must cool
> 50 cubic feet
$325
Must be 10 cubic feet or larger
< 15 cubic feet
$75
No commercial sized equipment
15-29 cubic feet
$125
30-49 cubic feet
$150
> 50 cubic feet
$300
< 15 cubic feet
$65
15-29 cubic feet
$200
30-49 cubic feet
$350
> 50 cubic feet
$375
Steam cooker, D
Commercial
Electric or natural gas
$800
Fryer D
Natural gas
$500
Convection oven D
Natural gas, 44% cooking energy efficiency
$200
Natural gas conveyor oven D
Commercial
Minimum cooking efficiency of 42% under heavy load
Upright broiler D
Natural gas EF (infrared)
$100
Griddle D
Natural gas
$600
Rotisserie oven D
Commercial
Natural gas efficient rotisserie oven (infrared)
$1,350
Rotating rack oven D
Commercial
Natural gas rotating rack oven (infrared)
$1,500
Charbroiler D
Commercial
Natural gas efficient charbroiler (infrared)
$1,100
Salamander broiler D
Commercial
Natural gas efficient salamander broiler (infrared)
$525
Dishwasher D
Alliant Energy must supply the energy
for the water heater
Refrigerator, glass door D
Freezer, solid door D
Freezer, glass door D
Electric, 70% cooking energy efficiency
$1,000
Idle rate (BTUH) is < 57,000
Program/equipment
Rebate
Server
Single or family
$10
Thin client
ENERGY STAR
$5
Desktop and integrated computers
ENERGY STAR
$10
PC network management software
Must provide energy savings estimate generated by the
software or another assessment tool. Network system
must control a minimum of 10 units.
$6 per
installed
PC
Rebate
Working refrigerators, freezers and room air conditioners
Refrigerator
or freezer
$50 each
Appliance Recycling
Energy assessment
Room air
conditioner
$25 each
Customer must receive primary heating or cooling energy
from Alliant Energy
Cooling energy only: Call 1-866-ALLIANT for more details
Renters need owner’s prior approval
Building must be built before January 1, 2005
Custom projects
Energy
expert will
install free
low-cost
energyefficient
equipment
Energy-efficient equipment that uses energy from Alliant Rebate
Energy and is not covered under the rebate programs
varies by
listed can be reviewed for rebate eligibility through the
project
Custom Rebates program.
Projects must be pre-approved. Call 1-866-ALLIANT
(866-255-4268) to speak to a key account manager
for details.
D Indicates rebates available for new construction. All other rebates for existing buildings only.
All programs are available to business customers of Alliant Energy in Iowa. Programs are valid January 1, 2015 through December 31, 2015 and are
subject to change. Alliant Energy must provide the main source of energy for qualifying equipment.
Rebate amount is limited to 50% of equipment purchase price, except insulation and building sealing.
For more information, please call
or call
1-866-ALLIANT (866-255-4268).
1-866-ALLIANT (866-255-4268)
8 a.m. to 5 p.m. Monday - Friday
or call
1-866-ALLIANT (866-255-4268).
200 First St. SE
Cedar Rapids, IA 52401-1409
For more information on these and other energy-efficiency programs,
give us a call between 8 a.m. to 5 p.m. Monday - Friday.
1-866-ALLIANT (866-255-4268)
Fax (319) 450-0218
[email protected]
alliantenergy.com/rebates
Facts and figures referenced in this booklet were found at the following sources:
energystar.gov
ase.org/consumers
eere.energy.gov
eei.org
aceee.org
© 2014 Alliant Energy ECRM158184 1 71-1185 12/14 MJ

REBATES - Alliant Energy

Transcription

Similar documents

186616

on ampeg svt heads and cabs!

Milgard Essence Rebate Flyer - 2014 Q2

October 15, 2015 - January 31, 2016 *Receive 25% Mail

RV Winter Cover Product Launch Offer 2012 25 Rousseau Avenue

SPIDERWIRE® STEALTH® OR ULTRACAST® $5 REBATE OFFER

rebates - Alliant Energy

BUY KINGSTON ValueRAMTM MEMORY, GET CASH

Mail in rebate offer expires December 31, 2015. Offer valid only at